From 8c124d998ea0c9022e247b11ac51f86ec8afa0e1 Mon Sep 17 00:00:00 2001 From: Ziyang Huang Date: Wed, 11 Oct 2023 00:44:00 +0800 Subject: mmc: meson-mx-sdhc: Fix initialization frozen issue Commit 4bc31edebde5 ("mmc: core: Set HS clock speed before sending HS CMD13") set HS clock (52MHz) before switching to HS mode. For this freq, FCLK_DIV5 will be selected and div value is 10 (reg value is 9). Then we set rx_clk_phase to 11 or 15 which is out of range and make hardware frozen. After we send command request, no irq will be interrupted and the mmc driver will keep to wait for request finished, even durning rebooting. So let's set it to Phase 90 which should work in most cases. Then let meson_mx_sdhc_execute_tuning() to find the accurate value for data transfer. If this doesn't work, maybe need to define a factor in dts. Fixes: e4bf1b0970ef ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host") Signed-off-by: Ziyang Huang Tested-by: Anand Moon Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/TYZPR01MB5556A3E71554A2EC08597EA4C9CDA@TYZPR01MB5556.apcprd01.prod.exchangelabs.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/meson-mx-sdhc-mmc.c | 26 +++++--------------------- 1 file changed, 5 insertions(+), 21 deletions(-) diff --git a/drivers/mmc/host/meson-mx-sdhc-mmc.c b/drivers/mmc/host/meson-mx-sdhc-mmc.c index 528ec8166e7c..1ed9731e77ef 100644 --- a/drivers/mmc/host/meson-mx-sdhc-mmc.c +++ b/drivers/mmc/host/meson-mx-sdhc-mmc.c @@ -269,7 +269,7 @@ static int meson_mx_sdhc_enable_clks(struct mmc_host *mmc) static int meson_mx_sdhc_set_clk(struct mmc_host *mmc, struct mmc_ios *ios) { struct meson_mx_sdhc_host *host = mmc_priv(mmc); - u32 rx_clk_phase; + u32 val, rx_clk_phase; int ret; meson_mx_sdhc_disable_clks(mmc); @@ -290,27 +290,11 @@ static int meson_mx_sdhc_set_clk(struct mmc_host *mmc, struct mmc_ios *ios) mmc->actual_clock = clk_get_rate(host->sd_clk); /* - * according to Amlogic the following latching points are - * selected with empirical values, there is no (known) formula - * to calculate these. + * Phase 90 should work in most cases. For data transmission, + * meson_mx_sdhc_execute_tuning() will find a accurate value */ - if (mmc->actual_clock > 100000000) { - rx_clk_phase = 1; - } else if (mmc->actual_clock > 45000000) { - if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) - rx_clk_phase = 15; - else - rx_clk_phase = 11; - } else if (mmc->actual_clock >= 25000000) { - rx_clk_phase = 15; - } else if (mmc->actual_clock > 5000000) { - rx_clk_phase = 23; - } else if (mmc->actual_clock > 1000000) { - rx_clk_phase = 55; - } else { - rx_clk_phase = 1061; - } - + regmap_read(host->regmap, MESON_SDHC_CLKC, &val); + rx_clk_phase = FIELD_GET(MESON_SDHC_CLKC_CLK_DIV, val) / 4; regmap_update_bits(host->regmap, MESON_SDHC_CLK2, MESON_SDHC_CLK2_RX_CLK_PHASE, FIELD_PREP(MESON_SDHC_CLK2_RX_CLK_PHASE, -- cgit From e7794c14fd73e5eb4a3e0ecaa5334d5a17377c50 Mon Sep 17 00:00:00 2001 From: Jorge Ramirez-Ortiz Date: Fri, 1 Dec 2023 16:31:43 +0100 Subject: mmc: rpmb: fixes pause retune on all RPMB partitions. When RPMB was converted to a character device, it added support for multiple RPMB partitions (Commit 97548575bef3 ("mmc: block: Convert RPMB to a character device"). One of the changes in this commit was transforming the variable target_part defined in __mmc_blk_ioctl_cmd into a bitmask. This inadvertently regressed the validation check done in mmc_blk_part_switch_pre() and mmc_blk_part_switch_post(), so let's fix it. Fixes: 97548575bef3 ("mmc: block: Convert RPMB to a character device") Signed-off-by: Jorge Ramirez-Ortiz Reviewed-by: Linus Walleij Cc: Link: https://lore.kernel.org/r/20231201153143.1449753-1-jorge@foundries.io Signed-off-by: Ulf Hansson --- drivers/mmc/core/block.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index f9a5cffa64b1..134c36edb6cf 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -851,9 +851,10 @@ static const struct block_device_operations mmc_bdops = { static int mmc_blk_part_switch_pre(struct mmc_card *card, unsigned int part_type) { + const unsigned int mask = EXT_CSD_PART_CONFIG_ACC_RPMB; int ret = 0; - if (part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) { + if ((part_type & mask) == mask) { if (card->ext_csd.cmdq_en) { ret = mmc_cmdq_disable(card); if (ret) @@ -868,9 +869,10 @@ static int mmc_blk_part_switch_pre(struct mmc_card *card, static int mmc_blk_part_switch_post(struct mmc_card *card, unsigned int part_type) { + const unsigned int mask = EXT_CSD_PART_CONFIG_ACC_RPMB; int ret = 0; - if (part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) { + if ((part_type & mask) == mask) { mmc_retune_unpause(card->host); if (card->reenable_cmdq && !card->ext_csd.cmdq_en) ret = mmc_cmdq_enable(card); @@ -3145,4 +3147,3 @@ module_exit(mmc_blk_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver"); - -- cgit