From b5acec09e259d9972b0e82e3a97ca019f0df29bb Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 25 Mar 2019 15:15:25 +0530 Subject: ARM: dts: dra7: Add properties to enable PCIe x2 lane mode ti,syscon-lane-sel and ti,syscon-lane-conf properties specific to enable PCIe x2 lane mode are added here. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 2bc9add8b7a5..d87e932f45bd 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -193,6 +193,7 @@ ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; + ti,syscon-lane-sel = <&scm_conf_pcie 0x18>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie1_intc 1>, <0 0 0 2 &pcie1_intc 2>, @@ -218,6 +219,7 @@ phys = <&pcie1_phy>; phy-names = "pcie-phy0"; ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; + ti,syscon-lane-sel = <&scm_conf_pcie 0x18>; status = "disabled"; }; }; -- cgit From d921e53a51076c4494c6435ab142d36b21687755 Mon Sep 17 00:00:00 2001 From: Kabir Sahane Date: Fri, 29 Mar 2019 12:53:32 -0500 Subject: ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on These regulator outputs are needed even in deep sleep modes to prevent low-voltage detection events. Make these always ON to avoid this. Signed-off-by: Kabir Sahane Signed-off-by: Andrew F. Davis Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 9dfd80e3b76e..7db5cf3facde 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -634,12 +634,16 @@ regulator-name = "v1_0bat"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; }; dcdc6: regulator-dcdc6 { regulator-name = "v1_8bat"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; ldo1: regulator-ldo1 { -- cgit From 177425ef586a932b968d4adf6a258da61b0ae727 Mon Sep 17 00:00:00 2001 From: Mike Erdahl Date: Fri, 29 Mar 2019 12:53:33 -0500 Subject: ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory When going to suspend to ram mode (or rtc-only mode), the DDR regulator must be told to stay on, else this rail will go down when the PMIC_EN signal is deasserted. Signed-off-by: Mike Erdahl Signed-off-by: Andrew F. Davis Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43x-epos-evm.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 7db5cf3facde..606b848d809f 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -620,6 +620,12 @@ regulator-name = "vdcdc3"; regulator-boot-on; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + regulator-state-disk { + regulator-off-in-suspend; + }; }; dcdc4: regulator-dcdc4 { -- cgit From e74cf9186be870e4a78ddfd59b0c4b57ab549c0e Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 29 Mar 2019 12:53:34 -0500 Subject: ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source Mark matrix-keypad as a wakeup source. Signed-off-by: Andrew F. Davis Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43x-epos-evm.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 606b848d809f..9b8b132b04e1 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -80,6 +80,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&matrix_keypad_default>; pinctrl-1 = <&matrix_keypad_sleep>; + wakeup-source; row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ -- cgit From b453c417609fa035c76e6a9c0c3dcf2cb42c1112 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 29 Mar 2019 13:13:13 -0500 Subject: ARM: dts: omap2420-n810: Use new CODEC reset pin name The correct DT property for specifying a GPIO used for reset is "reset-gpios", the driver now accepts this name, use it here. Signed-off-by: Andrew F. Davis Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap2420-n810.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts index 96b9913ecc1f..09c1dbc0bb69 100644 --- a/arch/arm/boot/dts/omap2420-n810.dts +++ b/arch/arm/boot/dts/omap2420-n810.dts @@ -48,7 +48,7 @@ pinctrl-names = "default"; pinctrl-0 = <&aic33_pins>; - gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */ + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */ ai3x-gpio-func = < 10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */ -- cgit From 09f837546edfe7f79774a39f99ed8401bb9285f2 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 5 Apr 2019 16:28:05 +0300 Subject: dt-binding: arm: omap: Add information for AM5748 Add DT binding details for AM5748 SoC and AM5748 IDK. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- Documentation/devicetree/bindings/arm/omap/omap.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 2ecc712bf707..1c1e48fd94b5 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -92,6 +92,9 @@ SoCs: - DRA718 compatible = "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7" +- AM5748 + compatible = "ti,am5748", "ti,dra762", "ti,dra7" + - AM5728 compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" @@ -184,6 +187,9 @@ Boards: - AM57XX SBC-AM57x compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" +- AM5748 IDK + compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7"; + - AM5728 IDK compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" -- cgit From bcbb63b80284af0061ac44fe944d31a8482d2b8a Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 8 Apr 2019 12:42:49 +0300 Subject: ARM: dts: dra7: Separate AM57 dtsi files AM5 and DRA7 SoC families have different set of modules in them so the SoC sepecific dtsi files need to be separated. e.g. Some of the major differences between AM576 and DRA76 DRA76x AM576x USB3 x USB4 x ATL x VCP x MLB x ISS x PRU-ICSS1 x PRU-ICSS2 x This patch only deals with disabling USB3, USB4 and ATL for AM57 variants. Signed-off-by: Roger Quadros Reviewed-by: Lokesh Vutla Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am5718.dtsi | 32 ++++++++++++++++++++++++ arch/arm/boot/dts/am571x-idk.dts | 2 +- arch/arm/boot/dts/am5728.dtsi | 33 +++++++++++++++++++++++++ arch/arm/boot/dts/am572x-idk.dts | 5 ++-- arch/arm/boot/dts/am5748.dtsi | 33 +++++++++++++++++++++++++ arch/arm/boot/dts/am574x-idk.dts | 4 +-- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 2 +- arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +- arch/arm/boot/dts/dra7-l4.dtsi | 6 ++--- 9 files changed, 108 insertions(+), 11 deletions(-) create mode 100644 arch/arm/boot/dts/am5718.dtsi create mode 100644 arch/arm/boot/dts/am5728.dtsi create mode 100644 arch/arm/boot/dts/am5748.dtsi diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi new file mode 100644 index 000000000000..d51007c3e8c4 --- /dev/null +++ b/arch/arm/boot/dts/am5718.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "dra72x.dtsi" + +/ { + compatible = "ti,am5718", "ti,dra7"; +}; + +/* + * These modules are not present on AM5718 + * + * ATL + * VCP1, VCP2 + * MLB + * ISS + * USB3, USB4 + */ + +&usb3_tm { + status = "disabled"; +}; + +&usb4_tm { + status = "disabled"; +}; + +&atl_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 6432309b39e3..66116ad3f9f4 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -#include "dra72x.dtsi" +#include "am5718.dtsi" #include #include #include "dra7-mmc-iodelay.dtsi" diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi new file mode 100644 index 000000000000..82e5427ef6a9 --- /dev/null +++ b/arch/arm/boot/dts/am5728.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "dra74x.dtsi" + +/ { + compatible = "ti,am5728", "ti,dra7"; +}; + +/* + * These modules are not present on AM5728 + * + * EVE1, EVE2 + * ATL + * VCP1, VCP2 + * MLB + * ISS + * USB3, USB4 + */ + +&usb3_tm { + status = "disabled"; +}; + +&usb4_tm { + status = "disabled"; +}; + +&atl_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index b2fb6e097be7..4f835222c266 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -8,15 +8,14 @@ /dts-v1/; -#include "dra74x.dtsi" +#include "am5728.dtsi" #include "dra7-mmc-iodelay.dtsi" #include "dra74x-mmc-iodelay.dtsi" #include "am572x-idk-common.dtsi" / { model = "TI AM5728 IDK"; - compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", - "ti,dra7"; + compatible = "ti,am5728-idk", "ti,am5728", "ti,dra7"; }; &mmc1 { diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi new file mode 100644 index 000000000000..5e129759d04a --- /dev/null +++ b/arch/arm/boot/dts/am5748.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "dra76x.dtsi" + +/ { + compatible = "ti,am5748", "ti,dra762", "ti,dra7"; +}; + +/* + * These modules are not present on AM5748 + * + * EVE1, EVE2 + * ATL + * VCP1, VCP2 + * MLB + * ISS + * USB3, USB4 + */ + +&usb3_tm { + status = "disabled"; +}; + +&usb4_tm { + status = "disabled"; +}; + +&atl_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 378dfa780ac1..dc5141c35610 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -6,14 +6,14 @@ /dts-v1/; -#include "dra76x.dtsi" +#include "am5748.dtsi" #include "dra7-mmc-iodelay.dtsi" #include "dra76x-mmc-iodelay.dtsi" #include "am572x-idk-common.dtsi" / { model = "TI AM5748 IDK"; - compatible = "ti,am5728-idk", "ti,dra762", "ti,dra7"; + compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7"; }; &qspi { diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 1e6620f139dd..2341a56ebab9 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -7,7 +7,7 @@ */ /dts-v1/; -#include "dra74x.dtsi" +#include "am5728.dtsi" #include "am57xx-commercial-grade.dtsi" #include "dra74x-mmc-iodelay.dtsi" #include diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 4748ce8747ad..0460de0da2bf 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -13,7 +13,7 @@ #include #include -#include "dra74x.dtsi" +#include "am5728.dtsi" / { model = "CompuLab CL-SOM-AM57x"; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 414f1cd68733..fe9f0bc29fec 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -2499,7 +2499,7 @@ ranges = <0x0 0x3a000 0x1000>; }; - target-module@3c000 { /* 0x4843c000, ap 23 08.0 */ + atl_tm: target-module@3c000 { /* 0x4843c000, ap 23 08.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x3c000 0x4>; reg-names = "rev"; @@ -4099,7 +4099,7 @@ }; }; - target-module@100000 { /* 0x48900000, ap 85 04.0 */ + usb3_tm: target-module@100000 { /* 0x48900000, ap 85 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "usb_otg_ss3"; reg = <0x100000 0x4>, @@ -4148,7 +4148,7 @@ }; }; - target-module@140000 { /* 0x48940000, ap 75 3c.0 */ + usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "usb_otg_ss4"; reg = <0x140000 0x4>, -- cgit