From fcdb44d08a95003c3d040aecdee286156ec6f34e Mon Sep 17 00:00:00 2001 From: James Prestwood Date: Mon, 1 Nov 2021 10:36:28 -0700 Subject: net: arp: introduce arp_evict_nocarrier sysctl parameter This change introduces a new sysctl parameter, arp_evict_nocarrier. When set (default) the ARP cache will be cleared on a NOCARRIER event. This new option has been defaulted to '1' which maintains existing behavior. Clearing the ARP cache on NOCARRIER is relatively new, introduced by: commit 859bd2ef1fc1110a8031b967ee656c53a6260a76 Author: David Ahern Date: Thu Oct 11 20:33:49 2018 -0700 net: Evict neighbor entries on carrier down The reason for this changes is to prevent the ARP cache from being cleared when a wireless device roams. Specifically for wireless roams the ARP cache should not be cleared because the underlying network has not changed. Clearing the ARP cache in this case can introduce significant delays sending out packets after a roam. A user reported such a situation here: https://lore.kernel.org/linux-wireless/CACsRnHWa47zpx3D1oDq9JYnZWniS8yBwW1h0WAVZ6vrbwL_S0w@mail.gmail.com/ After some investigation it was found that the kernel was holding onto packets until ARP finished which resulted in this 1 second delay. It was also found that the first ARP who-has was never responded to, which is actually what caues the delay. This change is more or less working around this behavior, but again, there is no reason to clear the cache on a roam anyways. As for the unanswered who-has, we know the packet made it OTA since it was seen while monitoring. Why it never received a response is unknown. In any case, since this is a problem on the AP side of things all that can be done is to work around it until it is solved. Some background on testing/reproducing the packet delay: Hardware: - 2 access points configured for Fast BSS Transition (Though I don't see why regular reassociation wouldn't have the same behavior) - Wireless station running IWD as supplicant - A device on network able to respond to pings (I used one of the APs) Procedure: - Connect to first AP - Ping once to establish an ARP entry - Start a tcpdump - Roam to second AP - Wait for operstate UP event, and note the timestamp - Start pinging Results: Below is the tcpdump after UP. It was recorded the interface went UP at 10:42:01.432875. 10:42:01.461871 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28 10:42:02.497976 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28 10:42:02.507162 ARP, Reply 192.168.254.1 is-at ac:86:74:55:b0:20, length 46 10:42:02.507185 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 1, length 64 10:42:02.507205 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 2, length 64 10:42:02.507212 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 3, length 64 10:42:02.507219 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 4, length 64 10:42:02.507225 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 5, length 64 10:42:02.507232 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 6, length 64 10:42:02.515373 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 1, length 64 10:42:02.521399 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 2, length 64 10:42:02.521612 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 3, length 64 10:42:02.521941 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 4, length 64 10:42:02.522419 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 5, length 64 10:42:02.523085 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 6, length 64 You can see the first ARP who-has went out very quickly after UP, but was never responded to. Nearly a second later the kernel retries and gets a response. Only then do the ping packets go out. If an ARP entry is manually added prior to UP (after the cache is cleared) it is seen that the first ping is never responded to, so its not only an issue with ARP but with data packets in general. As mentioned prior, the wireless interface was also monitored to verify the ping/ARP packet made it OTA which was observed to be true. Signed-off-by: James Prestwood Reviewed-by: David Ahern Signed-off-by: Jakub Kicinski --- Documentation/networking/ip-sysctl.rst | 9 +++++++++ include/linux/inetdevice.h | 2 ++ include/uapi/linux/ip.h | 1 + include/uapi/linux/sysctl.h | 1 + net/ipv4/arp.c | 11 ++++++++++- net/ipv4/devinet.c | 4 ++++ 6 files changed, 27 insertions(+), 1 deletion(-) diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 16b8bf72feaf..18fde4ed7a5e 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -1611,6 +1611,15 @@ arp_accept - BOOLEAN gratuitous arp frame, the arp table will be updated regardless if this setting is on or off. +arp_evict_nocarrier - BOOLEAN + Clears the ARP cache on NOCARRIER events. This option is important for + wireless devices where the ARP cache should not be cleared when roaming + between access points on the same network. In most cases this should + remain as the default (1). + + - 1 - (default): Clear the ARP cache on NOCARRIER events + - 0 - Do not clear ARP cache on NOCARRIER events + mcast_solicit - INTEGER The maximum number of multicast probes in INCOMPLETE state, when the associated hardware address is unknown. Defaults diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index a038feb63f23..518b484a7f07 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -133,6 +133,8 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev) #define IN_DEV_ARP_ANNOUNCE(in_dev) IN_DEV_MAXCONF((in_dev), ARP_ANNOUNCE) #define IN_DEV_ARP_IGNORE(in_dev) IN_DEV_MAXCONF((in_dev), ARP_IGNORE) #define IN_DEV_ARP_NOTIFY(in_dev) IN_DEV_MAXCONF((in_dev), ARP_NOTIFY) +#define IN_DEV_ARP_EVICT_NOCARRIER(in_dev) IN_DEV_ANDCONF((in_dev), \ + ARP_EVICT_NOCARRIER) struct in_ifaddr { struct hlist_node hash; diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h index e42d13b55cf3..e00bbb9c47bb 100644 --- a/include/uapi/linux/ip.h +++ b/include/uapi/linux/ip.h @@ -169,6 +169,7 @@ enum IPV4_DEVCONF_DROP_UNICAST_IN_L2_MULTICAST, IPV4_DEVCONF_DROP_GRATUITOUS_ARP, IPV4_DEVCONF_BC_FORWARDING, + IPV4_DEVCONF_ARP_EVICT_NOCARRIER, __IPV4_DEVCONF_MAX }; diff --git a/include/uapi/linux/sysctl.h b/include/uapi/linux/sysctl.h index 1e05d3caa712..6a3b194c50fe 100644 --- a/include/uapi/linux/sysctl.h +++ b/include/uapi/linux/sysctl.h @@ -482,6 +482,7 @@ enum NET_IPV4_CONF_PROMOTE_SECONDARIES=20, NET_IPV4_CONF_ARP_ACCEPT=21, NET_IPV4_CONF_ARP_NOTIFY=22, + NET_IPV4_CONF_ARP_EVICT_NOCARRIER=23, }; /* /proc/sys/net/ipv4/netfilter */ diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index 922dd73e5740..857a144b1ea9 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -1247,6 +1247,8 @@ static int arp_netdev_event(struct notifier_block *this, unsigned long event, { struct net_device *dev = netdev_notifier_info_to_dev(ptr); struct netdev_notifier_change_info *change_info; + struct in_device *in_dev; + bool evict_nocarrier; switch (event) { case NETDEV_CHANGEADDR: @@ -1257,7 +1259,14 @@ static int arp_netdev_event(struct notifier_block *this, unsigned long event, change_info = ptr; if (change_info->flags_changed & IFF_NOARP) neigh_changeaddr(&arp_tbl, dev); - if (!netif_carrier_ok(dev)) + + in_dev = __in_dev_get_rtnl(dev); + if (!in_dev) + evict_nocarrier = true; + else + evict_nocarrier = IN_DEV_ARP_EVICT_NOCARRIER(in_dev); + + if (evict_nocarrier && !netif_carrier_ok(dev)) neigh_carrier_down(&arp_tbl, dev); break; default: diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index f4468980b675..ec73a0d52d3e 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -75,6 +75,7 @@ static struct ipv4_devconf ipv4_devconf = { [IPV4_DEVCONF_SHARED_MEDIA - 1] = 1, [IPV4_DEVCONF_IGMPV2_UNSOLICITED_REPORT_INTERVAL - 1] = 10000 /*ms*/, [IPV4_DEVCONF_IGMPV3_UNSOLICITED_REPORT_INTERVAL - 1] = 1000 /*ms*/, + [IPV4_DEVCONF_ARP_EVICT_NOCARRIER - 1] = 1, }, }; @@ -87,6 +88,7 @@ static struct ipv4_devconf ipv4_devconf_dflt = { [IPV4_DEVCONF_ACCEPT_SOURCE_ROUTE - 1] = 1, [IPV4_DEVCONF_IGMPV2_UNSOLICITED_REPORT_INTERVAL - 1] = 10000 /*ms*/, [IPV4_DEVCONF_IGMPV3_UNSOLICITED_REPORT_INTERVAL - 1] = 1000 /*ms*/, + [IPV4_DEVCONF_ARP_EVICT_NOCARRIER - 1] = 1, }, }; @@ -2532,6 +2534,8 @@ static struct devinet_sysctl_table { DEVINET_SYSCTL_RW_ENTRY(ARP_IGNORE, "arp_ignore"), DEVINET_SYSCTL_RW_ENTRY(ARP_ACCEPT, "arp_accept"), DEVINET_SYSCTL_RW_ENTRY(ARP_NOTIFY, "arp_notify"), + DEVINET_SYSCTL_RW_ENTRY(ARP_EVICT_NOCARRIER, + "arp_evict_nocarrier"), DEVINET_SYSCTL_RW_ENTRY(PROXY_ARP_PVLAN, "proxy_arp_pvlan"), DEVINET_SYSCTL_RW_ENTRY(FORCE_IGMP_VERSION, "force_igmp_version"), -- cgit From 18ac597af25e9760b76471524096f5b29eb820e6 Mon Sep 17 00:00:00 2001 From: James Prestwood Date: Mon, 1 Nov 2021 10:36:29 -0700 Subject: net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter In most situations the neighbor discovery cache should be cleared on a NOCARRIER event which is currently done unconditionally. But for wireless roams the neighbor discovery cache can and should remain intact since the underlying network has not changed. This patch introduces a sysctl option ndisc_evict_nocarrier which can be disabled by a wireless supplicant during a roam. This allows packets to be sent after a roam immediately without having to wait for neighbor discovery. A user reported roughly a 1 second delay after a roam before packets could be sent out (note, on IPv4). This delay was due to the ARP cache being cleared. During testing of this same scenario using IPv6 no delay was noticed, but regardless there is no reason to clear the ndisc cache for wireless roams. Signed-off-by: James Prestwood Reviewed-by: David Ahern Signed-off-by: Jakub Kicinski --- Documentation/networking/ip-sysctl.rst | 9 +++++++++ include/linux/ipv6.h | 1 + include/uapi/linux/ipv6.h | 1 + net/ipv6/addrconf.c | 12 ++++++++++++ net/ipv6/ndisc.c | 12 +++++++++++- 5 files changed, 34 insertions(+), 1 deletion(-) diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 18fde4ed7a5e..c61cc0219f4c 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -2350,6 +2350,15 @@ ndisc_tclass - INTEGER * 0 - (default) +ndisc_evict_nocarrier - BOOLEAN + Clears the neighbor discovery table on NOCARRIER events. This option is + important for wireless devices where the neighbor discovery cache should + not be cleared when roaming between access points on the same network. + In most cases this should remain as the default (1). + + - 1 - (default): Clear neighbor discover cache on NOCARRIER events. + - 0 - Do not clear neighbor discovery cache on NOCARRIER events. + mldv1_unsolicited_report_interval - INTEGER The interval in milliseconds in which the next unsolicited MLDv1 report retransmit will take place. diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index c383630d3f06..20c1f968da7c 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -79,6 +79,7 @@ struct ipv6_devconf { __u32 ioam6_id; __u32 ioam6_id_wide; __u8 ioam6_enabled; + __u8 ndisc_evict_nocarrier; struct ctl_table_header *sysctl_header; }; diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index b243a53fa985..d4178dace0bf 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -193,6 +193,7 @@ enum { DEVCONF_IOAM6_ENABLED, DEVCONF_IOAM6_ID, DEVCONF_IOAM6_ID_WIDE, + DEVCONF_NDISC_EVICT_NOCARRIER, DEVCONF_MAX }; diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 9e1463a2acae..3445f8017430 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -241,6 +241,7 @@ static struct ipv6_devconf ipv6_devconf __read_mostly = { .ioam6_enabled = 0, .ioam6_id = IOAM6_DEFAULT_IF_ID, .ioam6_id_wide = IOAM6_DEFAULT_IF_ID_WIDE, + .ndisc_evict_nocarrier = 1, }; static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = { @@ -300,6 +301,7 @@ static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = { .ioam6_enabled = 0, .ioam6_id = IOAM6_DEFAULT_IF_ID, .ioam6_id_wide = IOAM6_DEFAULT_IF_ID_WIDE, + .ndisc_evict_nocarrier = 1, }; /* Check if link is ready: is it up and is a valid qdisc available */ @@ -5545,6 +5547,7 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf, array[DEVCONF_IOAM6_ENABLED] = cnf->ioam6_enabled; array[DEVCONF_IOAM6_ID] = cnf->ioam6_id; array[DEVCONF_IOAM6_ID_WIDE] = cnf->ioam6_id_wide; + array[DEVCONF_NDISC_EVICT_NOCARRIER] = cnf->ndisc_evict_nocarrier; } static inline size_t inet6_ifla6_size(void) @@ -6986,6 +6989,15 @@ static const struct ctl_table addrconf_sysctl[] = { .mode = 0644, .proc_handler = proc_douintvec, }, + { + .procname = "ndisc_evict_nocarrier", + .data = &ipv6_devconf.ndisc_evict_nocarrier, + .maxlen = sizeof(u8), + .mode = 0644, + .proc_handler = proc_dou8vec_minmax, + .extra1 = (void *)SYSCTL_ZERO, + .extra2 = (void *)SYSCTL_ONE, + }, { /* sentinel */ } diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 184190b9ea25..f03b597e4121 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1794,6 +1794,7 @@ static int ndisc_netdev_event(struct notifier_block *this, unsigned long event, struct netdev_notifier_change_info *change_info; struct net *net = dev_net(dev); struct inet6_dev *idev; + bool evict_nocarrier; switch (event) { case NETDEV_CHANGEADDR: @@ -1810,10 +1811,19 @@ static int ndisc_netdev_event(struct notifier_block *this, unsigned long event, in6_dev_put(idev); break; case NETDEV_CHANGE: + idev = in6_dev_get(dev); + if (!idev) + evict_nocarrier = true; + else { + evict_nocarrier = idev->cnf.ndisc_evict_nocarrier && + net->ipv6.devconf_all->ndisc_evict_nocarrier; + in6_dev_put(idev); + } + change_info = ptr; if (change_info->flags_changed & IFF_NOARP) neigh_changeaddr(&nd_tbl, dev); - if (!netif_carrier_ok(dev)) + if (evict_nocarrier && !netif_carrier_ok(dev)) neigh_carrier_down(&nd_tbl, dev); break; case NETDEV_DOWN: -- cgit From f86ca07eb5310a1bdc7032458c7f76862f5a1552 Mon Sep 17 00:00:00 2001 From: James Prestwood Date: Mon, 1 Nov 2021 10:36:30 -0700 Subject: selftests: net: add arp_ndisc_evict_nocarrier This tests the sysctl options for ARP/ND: /net/ipv4/conf//arp_evict_nocarrier /net/ipv4/conf/all/arp_evict_nocarrier /net/ipv6/conf//ndisc_evict_nocarrier /net/ipv6/conf/all/ndisc_evict_nocarrier Signed-off-by: James Prestwood Reviewed-by: David Ahern Signed-off-by: Jakub Kicinski --- .../selftests/net/arp_ndisc_evict_nocarrier.sh | 220 +++++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100755 tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh diff --git a/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh b/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh new file mode 100755 index 000000000000..b5af08af8559 --- /dev/null +++ b/tools/testing/selftests/net/arp_ndisc_evict_nocarrier.sh @@ -0,0 +1,220 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Tests sysctl options {arp,ndisc}_evict_nocarrier={0,1} +# +# Create a veth pair and set IPs/routes on both. Then ping to establish +# an entry in the ARP/ND table. Depending on the test set sysctl option to +# 1 or 0. Set remote veth down which will cause local veth to go into a no +# carrier state. Depending on the test check the ARP/ND table: +# +# {arp,ndisc}_evict_nocarrier=1 should contain no ARP/ND after no carrier +# {arp,ndisc}_evict_nocarrer=0 should still contain the single ARP/ND entry +# + +readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)" +readonly V4_ADDR0=10.0.10.1 +readonly V4_ADDR1=10.0.10.2 +readonly V6_ADDR0=2001:db8:91::1 +readonly V6_ADDR1=2001:db8:91::2 +nsid=100 + +cleanup_v6() +{ + ip netns del me + ip netns del peer + + sysctl -w net.ipv4.conf.veth0.ndisc_evict_nocarrier=1 >/dev/null 2>&1 + sysctl -w net.ipv4.conf.all.ndisc_evict_nocarrier=1 >/dev/null 2>&1 +} + +create_ns() +{ + local n=${1} + + ip netns del ${n} 2>/dev/null + + ip netns add ${n} + ip netns set ${n} $((nsid++)) + ip -netns ${n} link set lo up +} + + +setup_v6() { + create_ns me + create_ns peer + + IP="ip -netns me" + + $IP li add veth1 type veth peer name veth2 + $IP li set veth1 up + $IP -6 addr add $V6_ADDR0/64 dev veth1 nodad + $IP li set veth2 netns peer up + ip -netns peer -6 addr add $V6_ADDR1/64 dev veth2 nodad + + ip netns exec me sysctl -w $1 >/dev/null 2>&1 + + # Establish an ND cache entry + ip netns exec me ping -6 -c1 -Iveth1 $V6_ADDR1 >/dev/null 2>&1 + # Should have the veth1 entry in ND table + ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 + if [ $? -ne 0 ]; then + cleanup_v6 + echo "failed" + exit + fi + + # Set veth2 down, which will put veth1 in NOCARRIER state + ip netns exec peer ip link set veth2 down +} + +setup_v4() { + ip netns add "${PEER_NS}" + ip link add name veth0 type veth peer name veth1 + ip link set dev veth0 up + ip link set dev veth1 netns "${PEER_NS}" + ip netns exec "${PEER_NS}" ip link set dev veth1 up + ip addr add $V4_ADDR0/24 dev veth0 + ip netns exec "${PEER_NS}" ip addr add $V4_ADDR1/24 dev veth1 + ip netns exec ${PEER_NS} ip route add default via $V4_ADDR1 dev veth1 + ip route add default via $V4_ADDR0 dev veth0 + + sysctl -w "$1" >/dev/null 2>&1 + + # Establish an ARP cache entry + ping -c1 -I veth0 $V4_ADDR1 -q >/dev/null 2>&1 + # Should have the veth1 entry in ARP table + ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 + if [ $? -ne 0 ]; then + cleanup_v4 + echo "failed" + exit + fi + + # Set veth1 down, which will put veth0 in NOCARRIER state + ip netns exec "${PEER_NS}" ip link set veth1 down +} + +cleanup_v4() { + ip neigh flush dev veth0 + ip link del veth0 + local -r ns="$(ip netns list|grep $PEER_NS)" + [ -n "$ns" ] && ip netns del $ns 2>/dev/null + + sysctl -w net.ipv4.conf.veth0.arp_evict_nocarrier=1 >/dev/null 2>&1 + sysctl -w net.ipv4.conf.all.arp_evict_nocarrier=1 >/dev/null 2>&1 +} + +# Run test when arp_evict_nocarrier = 1 (default). +run_arp_evict_nocarrier_enabled() { + echo "run arp_evict_nocarrier=1 test" + setup_v4 "net.ipv4.conf.veth0.arp_evict_nocarrier=1" + + # ARP table should be empty + ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "failed" + else + echo "ok" + fi + + cleanup_v4 +} + +# Run test when arp_evict_nocarrier = 0 +run_arp_evict_nocarrier_disabled() { + echo "run arp_evict_nocarrier=0 test" + setup_v4 "net.ipv4.conf.veth0.arp_evict_nocarrier=0" + + # ARP table should still contain the entry + ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "ok" + else + echo "failed" + fi + + cleanup_v4 +} + +run_arp_evict_nocarrier_disabled_all() { + echo "run all.arp_evict_nocarrier=0 test" + setup_v4 "net.ipv4.conf.all.arp_evict_nocarrier=0" + + # ARP table should still contain the entry + ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "ok" + else + echo "failed" + fi + + cleanup_v4 +} + +run_ndisc_evict_nocarrier_enabled() { + echo "run ndisc_evict_nocarrier=1 test" + + setup_v6 "net.ipv6.conf.veth1.ndisc_evict_nocarrier=1" + + ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "failed" + else + echo "ok" + fi + + cleanup_v6 +} + +run_ndisc_evict_nocarrier_disabled() { + echo "run ndisc_evict_nocarrier=0 test" + + setup_v6 "net.ipv6.conf.veth1.ndisc_evict_nocarrier=0" + + ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "ok" + else + echo "failed" + fi + + cleanup_v6 +} + +run_ndisc_evict_nocarrier_disabled_all() { + echo "run all.ndisc_evict_nocarrier=0 test" + + setup_v6 "net.ipv6.conf.all.ndisc_evict_nocarrier=0" + + ip netns exec me ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 + + if [ $? -eq 0 ];then + echo "ok" + else + echo "failed" + fi + + cleanup_v6 +} + +run_all_tests() { + run_arp_evict_nocarrier_enabled + run_arp_evict_nocarrier_disabled + run_arp_evict_nocarrier_disabled_all + run_ndisc_evict_nocarrier_enabled + run_ndisc_evict_nocarrier_disabled + run_ndisc_evict_nocarrier_disabled_all +} + +if [ "$(id -u)" -ne 0 ];then + echo "SKIP: Need root privileges" + exit $ksft_skip; +fi + +run_all_tests -- cgit