From 863580418bc82062083be854355f2213d3d804f5 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 1 Sep 2021 14:43:50 +0300 Subject: regulator: qcom-rpmh-regulator: fix pm8009-1 ldo7 resource name Fix a typo in the pm8009 LDO7 declaration, it uses resource name ldo%s6 instead of ldo%s7. Fixes: 951384cabc5d ("regulator: qcom-rpmh-regulator: add pm8009-1 chip revision") Signed-off-by: Dmitry Baryshkov Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210901114350.1106073-1-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown --- drivers/regulator/qcom-rpmh-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index 6cca910a76de..7f458d510483 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -991,7 +991,7 @@ static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = { RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4"), RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"), RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"), - RPMH_VREG("ldo7", "ldo%s6", &pmic5_pldo_lv, "vdd-l7"), + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo_lv, "vdd-l7"), {} }; -- cgit From 1fd95c05d8f742abfe906620780aee4dbe1a2db0 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 2 Sep 2021 11:36:01 -0400 Subject: ext4: add error checking to ext4_ext_replay_set_iblocks() If the call to ext4_map_blocks() fails due to an corrupted file system, ext4_ext_replay_set_iblocks() can get stuck in an infinite loop. This could be reproduced by running generic/526 with a file system that has inline_data and fast_commit enabled. The system will repeatedly log to the console: EXT4-fs warning (device dm-3): ext4_block_to_path:105: block 1074800922 > max in inode 131076 and the stack that it gets stuck in is: ext4_block_to_path+0xe3/0x130 ext4_ind_map_blocks+0x93/0x690 ext4_map_blocks+0x100/0x660 skip_hole+0x47/0x70 ext4_ext_replay_set_iblocks+0x223/0x440 ext4_fc_replay_inode+0x29e/0x3b0 ext4_fc_replay+0x278/0x550 do_one_pass+0x646/0xc10 jbd2_journal_recover+0x14a/0x270 jbd2_journal_load+0xc4/0x150 ext4_load_journal+0x1f3/0x490 ext4_fill_super+0x22d4/0x2c00 With this patch, generic/526 still fails, but system is no longer locking up in a tight loop. It's likely the root casue is that fast_commit replay is corrupting file systems with inline_data, and we probably need to add better error handling in the fast commit replay code path beyond what is done here, which essentially just breaks the infinite loop without reporting the to the higher levels of the code. Fixes: 8016E29F4362 ("ext4: fast commit recovery path") Cc: stable@kernel.org Cc: Harshad Shirwadkar Signed-off-by: Theodore Ts'o --- fs/ext4/extents.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index eb1dd4f024f2..e57019cc3601 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -5913,7 +5913,7 @@ void ext4_ext_replay_shrink_inode(struct inode *inode, ext4_lblk_t end) } /* Check if *cur is a hole and if it is, skip it */ -static void skip_hole(struct inode *inode, ext4_lblk_t *cur) +static int skip_hole(struct inode *inode, ext4_lblk_t *cur) { int ret; struct ext4_map_blocks map; @@ -5922,9 +5922,12 @@ static void skip_hole(struct inode *inode, ext4_lblk_t *cur) map.m_len = ((inode->i_size) >> inode->i_sb->s_blocksize_bits) - *cur; ret = ext4_map_blocks(NULL, inode, &map, 0); + if (ret < 0) + return ret; if (ret != 0) - return; + return 0; *cur = *cur + map.m_len; + return 0; } /* Count number of blocks used by this inode and update i_blocks */ @@ -5973,7 +5976,9 @@ int ext4_ext_replay_set_iblocks(struct inode *inode) * iblocks by total number of differences found. */ cur = 0; - skip_hole(inode, &cur); + ret = skip_hole(inode, &cur); + if (ret < 0) + goto out; path = ext4_find_extent(inode, cur, NULL, 0); if (IS_ERR(path)) goto out; @@ -5992,8 +5997,12 @@ int ext4_ext_replay_set_iblocks(struct inode *inode) } cur = max(cur + 1, le32_to_cpu(ex->ee_block) + ext4_ext_get_actual_len(ex)); - skip_hole(inode, &cur); - + ret = skip_hole(inode, &cur); + if (ret < 0) { + ext4_ext_drop_refs(path); + kfree(path); + break; + } path2 = ext4_find_extent(inode, cur, NULL, 0); if (IS_ERR(path2)) { ext4_ext_drop_refs(path); -- cgit From 0ddc5e55e6f1da1286fb2646f4248bf7da31a601 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 3 Sep 2021 09:29:07 +0100 Subject: Documentation: Fix irq-domain.rst build warning Correctly escape the * not to be used as emphasis. Also take this opportunity to clarify the fate of the rest of the legacy APIs. Reported-by: Stephen Rothwell Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210903085343.923036-1-maz@kernel.org --- Documentation/core-api/irq/irq-domain.rst | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/core-api/irq/irq-domain.rst b/Documentation/core-api/irq/irq-domain.rst index 6979b4af2c1f..9c0e8758037a 100644 --- a/Documentation/core-api/irq/irq-domain.rst +++ b/Documentation/core-api/irq/irq-domain.rst @@ -175,9 +175,10 @@ for IRQ numbers that are passed to struct device registrations. In that case the Linux IRQ numbers cannot be dynamically assigned and the legacy mapping should be used. -As the name implies, the *_legacy() functions are deprecated and only +As the name implies, the \*_legacy() functions are deprecated and only exist to ease the support of ancient platforms. No new users should be -added. +added. Same goes for the \*_simple() functions when their use results +in the legacy behaviour. The legacy map assumes a contiguous range of IRQ numbers has already been allocated for the controller and that the IRQ number can be -- cgit From 5457773ef99f25fcc4b238ac76b68e28273250f4 Mon Sep 17 00:00:00 2001 From: Tobias Schramm Date: Fri, 27 Aug 2021 07:03:57 +0200 Subject: spi: rockchip: handle zero length transfers without timing out Previously zero length transfers submitted to the Rokchip SPI driver would time out in the SPI layer. This happens because the SPI peripheral does not trigger a transfer completion interrupt for zero length transfers. Fix that by completing zero length transfers immediately at start of transfer. Signed-off-by: Tobias Schramm Link: https://lore.kernel.org/r/20210827050357.165409-1-t.schramm@manjaro.org Signed-off-by: Mark Brown --- drivers/spi/spi-rockchip.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 540861ca2ba3..553b6b9d0222 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -600,6 +600,12 @@ static int rockchip_spi_transfer_one( int ret; bool use_dma; + /* Zero length transfers won't trigger an interrupt on completion */ + if (!xfer->len) { + spi_finalize_current_transfer(ctlr); + return 1; + } + WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) && (readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY)); -- cgit From 4df031ff5876d94b48dd9ee486ba5522382a06b2 Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Fri, 16 Jul 2021 20:20:21 +0800 Subject: ext4: check and update i_disksize properly After commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize"), i_disksize could always be updated to i_size in ext4_setattr(), and we could sure that i_disksize <= i_size since holding inode lock and if i_disksize < i_size there are delalloc writes pending in the range upto i_size. If the end of the current write is <= i_size, there's no need to touch i_disksize since writeback will push i_disksize upto i_size eventually. So we can switch to check i_size instead of i_disksize in ext4_da_write_end() when write to the end of the file. we also could remove ext4_mark_inode_dirty() together because we defer inode dirtying to generic_write_end() or ext4_da_write_inline_data_end(). Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210716122024.1105856-2-yi.zhang@huawei.com --- fs/ext4/inode.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 2c33c795c4a7..76d9e25fe62c 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3084,35 +3084,37 @@ static int ext4_da_write_end(struct file *file, end = start + copied - 1; /* - * generic_write_end() will run mark_inode_dirty() if i_size - * changes. So let's piggyback the i_disksize mark_inode_dirty - * into that. + * Since we are holding inode lock, we are sure i_disksize <= + * i_size. We also know that if i_disksize < i_size, there are + * delalloc writes pending in the range upto i_size. If the end of + * the current write is <= i_size, there's no need to touch + * i_disksize since writeback will push i_disksize upto i_size + * eventually. If the end of the current write is > i_size and + * inside an allocated block (ext4_da_should_update_i_disksize() + * check), we need to update i_disksize here as neither + * ext4_writepage() nor certain ext4_writepages() paths not + * allocating blocks update i_disksize. + * + * Note that we defer inode dirtying to generic_write_end() / + * ext4_da_write_inline_data_end(). */ new_i_size = pos + copied; - if (copied && new_i_size > EXT4_I(inode)->i_disksize) { + if (copied && new_i_size > inode->i_size) { if (ext4_has_inline_data(inode) || - ext4_da_should_update_i_disksize(page, end)) { + ext4_da_should_update_i_disksize(page, end)) ext4_update_i_disksize(inode, new_i_size); - /* We need to mark inode dirty even if - * new_i_size is less that inode->i_size - * bu greater than i_disksize.(hint delalloc) - */ - ret = ext4_mark_inode_dirty(handle, inode); - } } if (write_mode != CONVERT_INLINE_DATA && ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) && ext4_has_inline_data(inode)) - ret2 = ext4_da_write_inline_data_end(inode, pos, len, copied, + ret = ext4_da_write_inline_data_end(inode, pos, len, copied, page); else - ret2 = generic_write_end(file, mapping, pos, len, copied, + ret = generic_write_end(file, mapping, pos, len, copied, page, fsdata); - copied = ret2; - if (ret2 < 0) - ret = ret2; + copied = ret; ret2 = ext4_journal_stop(handle); if (unlikely(ret2 && !ret)) ret = ret2; -- cgit From 55ce2f649b9e88111270333a8127e23f4f8f42d7 Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Fri, 16 Jul 2021 20:20:22 +0800 Subject: ext4: correct the error path of ext4_write_inline_data_end() Current error path of ext4_write_inline_data_end() is not correct. Firstly, it should pass out the error value if ext4_get_inode_loc() return fail, or else it could trigger infinite loop if we inject error here. And then it's better to add inode to orphan list if it return fail in ext4_journal_stop(), otherwise we could not restore inline xattr entry after power failure. Finally, we need to reset the 'ret' value if ext4_write_inline_data_end() return success in ext4_write_end() and ext4_journalled_write_end(), otherwise we could not get the error return value of ext4_journal_stop(). Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210716122024.1105856-3-yi.zhang@huawei.com --- fs/ext4/inline.c | 15 +++++---------- fs/ext4/inode.c | 7 +++++-- 2 files changed, 10 insertions(+), 12 deletions(-) diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index 70cb64db33f7..28b666f25ac2 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -733,25 +733,20 @@ int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len, void *kaddr; struct ext4_iloc iloc; - if (unlikely(copied < len)) { - if (!PageUptodate(page)) { - copied = 0; - goto out; - } - } + if (unlikely(copied < len) && !PageUptodate(page)) + return 0; ret = ext4_get_inode_loc(inode, &iloc); if (ret) { ext4_std_error(inode->i_sb, ret); - copied = 0; - goto out; + return ret; } ext4_write_lock_xattr(inode, &no_expand); BUG_ON(!ext4_has_inline_data(inode)); kaddr = kmap_atomic(page); - ext4_write_inline_data(inode, &iloc, kaddr, pos, len); + ext4_write_inline_data(inode, &iloc, kaddr, pos, copied); kunmap_atomic(kaddr); SetPageUptodate(page); /* clear page dirty so that writepages wouldn't work for us. */ @@ -760,7 +755,7 @@ int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len, ext4_write_unlock_xattr(inode, &no_expand); brelse(iloc.bh); mark_inode_dirty(inode); -out: + return copied; } diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 76d9e25fe62c..2baa17285096 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1295,6 +1295,7 @@ static int ext4_write_end(struct file *file, goto errout; } copied = ret; + ret = 0; } else copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); @@ -1321,13 +1322,14 @@ static int ext4_write_end(struct file *file, if (i_size_changed || inline_data) ret = ext4_mark_inode_dirty(handle, inode); +errout: if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside * inode->i_size. So truncate them */ ext4_orphan_add(handle, inode); -errout: + ret2 = ext4_journal_stop(handle); if (!ret) ret = ret2; @@ -1410,6 +1412,7 @@ static int ext4_journalled_write_end(struct file *file, goto errout; } copied = ret; + ret = 0; } else if (unlikely(copied < len) && !PageUptodate(page)) { copied = 0; ext4_journalled_zero_new_buffers(handle, page, from, to); @@ -1439,6 +1442,7 @@ static int ext4_journalled_write_end(struct file *file, ret = ret2; } +errout: if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside @@ -1446,7 +1450,6 @@ static int ext4_journalled_write_end(struct file *file, */ ext4_orphan_add(handle, inode); -errout: ret2 = ext4_journal_stop(handle); if (!ret) ret = ret2; -- cgit From 6984aef59814fb5c47b0e30c56e101186b5ebf8c Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Fri, 16 Jul 2021 20:20:23 +0800 Subject: ext4: factor out write end code of inline file Now that the inline_data file write end procedure are falled into the common write end functions, it is not clear. Factor them out and do some cleanup. This patch also drop ext4_da_write_inline_data_end() and switch to use ext4_write_inline_data_end() instead because we also need to do the same error processing if we failed to write data into inline entry. Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210716122024.1105856-4-yi.zhang@huawei.com --- fs/ext4/ext4.h | 3 -- fs/ext4/inline.c | 117 +++++++++++++++++++++++++++++-------------------------- fs/ext4/inode.c | 73 +++++++++++----------------------- 3 files changed, 84 insertions(+), 109 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index d71dcac3b97f..ea6c0aae8f1b 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -3533,9 +3533,6 @@ extern int ext4_da_write_inline_data_begin(struct address_space *mapping, unsigned flags, struct page **pagep, void **fsdata); -extern int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos, - unsigned len, unsigned copied, - struct page *page); extern int ext4_try_add_inline_entry(handle_t *handle, struct ext4_filename *fname, struct inode *dir, struct inode *inode); diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index 28b666f25ac2..d30709d42a27 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -729,34 +729,76 @@ convert: int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len, unsigned copied, struct page *page) { - int ret, no_expand; + handle_t *handle = ext4_journal_current_handle(); + int no_expand; void *kaddr; struct ext4_iloc iloc; + int ret = 0, ret2; if (unlikely(copied < len) && !PageUptodate(page)) - return 0; + copied = 0; - ret = ext4_get_inode_loc(inode, &iloc); - if (ret) { - ext4_std_error(inode->i_sb, ret); - return ret; - } + if (likely(copied)) { + ret = ext4_get_inode_loc(inode, &iloc); + if (ret) { + unlock_page(page); + put_page(page); + ext4_std_error(inode->i_sb, ret); + goto out; + } + ext4_write_lock_xattr(inode, &no_expand); + BUG_ON(!ext4_has_inline_data(inode)); - ext4_write_lock_xattr(inode, &no_expand); - BUG_ON(!ext4_has_inline_data(inode)); + kaddr = kmap_atomic(page); + ext4_write_inline_data(inode, &iloc, kaddr, pos, copied); + kunmap_atomic(kaddr); + SetPageUptodate(page); + /* clear page dirty so that writepages wouldn't work for us. */ + ClearPageDirty(page); - kaddr = kmap_atomic(page); - ext4_write_inline_data(inode, &iloc, kaddr, pos, copied); - kunmap_atomic(kaddr); - SetPageUptodate(page); - /* clear page dirty so that writepages wouldn't work for us. */ - ClearPageDirty(page); + ext4_write_unlock_xattr(inode, &no_expand); + brelse(iloc.bh); - ext4_write_unlock_xattr(inode, &no_expand); - brelse(iloc.bh); - mark_inode_dirty(inode); + /* + * It's important to update i_size while still holding page + * lock: page writeout could otherwise come in and zero + * beyond i_size. + */ + ext4_update_inode_size(inode, pos + copied); + } + unlock_page(page); + put_page(page); + + /* + * Don't mark the inode dirty under page lock. First, it unnecessarily + * makes the holding time of page lock longer. Second, it forces lock + * ordering of page lock and transaction start for journaling + * filesystems. + */ + if (likely(copied)) + mark_inode_dirty(inode); +out: + /* + * If we didn't copy as much data as expected, we need to trim back + * size of xattr containing inline data. + */ + if (pos + len > inode->i_size && ext4_can_truncate(inode)) + ext4_orphan_add(handle, inode); - return copied; + ret2 = ext4_journal_stop(handle); + if (!ret) + ret = ret2; + if (pos + len > inode->i_size) { + ext4_truncate_failed_write(inode); + /* + * If truncate failed early the inode might still be + * on the orphan list; we need to make sure the inode + * is removed from the orphan list in that case. + */ + if (inode->i_nlink) + ext4_orphan_del(NULL, inode); + } + return ret ? ret : copied; } struct buffer_head * @@ -937,43 +979,6 @@ out: return ret; } -int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos, - unsigned len, unsigned copied, - struct page *page) -{ - int ret; - - ret = ext4_write_inline_data_end(inode, pos, len, copied, page); - if (ret < 0) { - unlock_page(page); - put_page(page); - return ret; - } - copied = ret; - - /* - * No need to use i_size_read() here, the i_size - * cannot change under us because we hold i_mutex. - * - * But it's important to update i_size while still holding page lock: - * page writeout could otherwise come in and zero beyond i_size. - */ - if (pos+copied > inode->i_size) - i_size_write(inode, pos+copied); - unlock_page(page); - put_page(page); - - /* - * Don't mark the inode dirty under page lock. First, it unnecessarily - * makes the holding time of page lock longer. Second, it forces lock - * ordering of page lock and transaction start for journaling - * filesystems. - */ - mark_inode_dirty(inode); - - return copied; -} - #ifdef INLINE_DIR_DEBUG void ext4_show_inline_dir(struct inode *dir, struct buffer_head *bh, void *inline_start, int inline_size) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 2baa17285096..b80f15bba727 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1282,23 +1282,14 @@ static int ext4_write_end(struct file *file, loff_t old_size = inode->i_size; int ret = 0, ret2; int i_size_changed = 0; - int inline_data = ext4_has_inline_data(inode); bool verity = ext4_verity_in_progress(inode); trace_ext4_write_end(inode, pos, len, copied); - if (inline_data) { - ret = ext4_write_inline_data_end(inode, pos, len, - copied, page); - if (ret < 0) { - unlock_page(page); - put_page(page); - goto errout; - } - copied = ret; - ret = 0; - } else - copied = block_write_end(file, mapping, pos, - len, copied, page, fsdata); + + if (ext4_has_inline_data(inode)) + return ext4_write_inline_data_end(inode, pos, len, copied, page); + + copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); /* * it's important to update i_size while still holding page lock: * page writeout could otherwise come in and zero beyond i_size. @@ -1319,10 +1310,9 @@ static int ext4_write_end(struct file *file, * ordering of page lock and transaction start for journaling * filesystems. */ - if (i_size_changed || inline_data) + if (i_size_changed) ret = ext4_mark_inode_dirty(handle, inode); -errout: if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside @@ -1394,7 +1384,6 @@ static int ext4_journalled_write_end(struct file *file, int partial = 0; unsigned from, to; int size_changed = 0; - int inline_data = ext4_has_inline_data(inode); bool verity = ext4_verity_in_progress(inode); trace_ext4_journalled_write_end(inode, pos, len, copied); @@ -1403,17 +1392,10 @@ static int ext4_journalled_write_end(struct file *file, BUG_ON(!ext4_handle_valid(handle)); - if (inline_data) { - ret = ext4_write_inline_data_end(inode, pos, len, - copied, page); - if (ret < 0) { - unlock_page(page); - put_page(page); - goto errout; - } - copied = ret; - ret = 0; - } else if (unlikely(copied < len) && !PageUptodate(page)) { + if (ext4_has_inline_data(inode)) + return ext4_write_inline_data_end(inode, pos, len, copied, page); + + if (unlikely(copied < len) && !PageUptodate(page)) { copied = 0; ext4_journalled_zero_new_buffers(handle, page, from, to); } else { @@ -1436,13 +1418,12 @@ static int ext4_journalled_write_end(struct file *file, if (old_size < pos && !verity) pagecache_isize_extended(inode, old_size, pos); - if (size_changed || inline_data) { + if (size_changed) { ret2 = ext4_mark_inode_dirty(handle, inode); if (!ret) ret = ret2; } -errout: if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside @@ -3072,7 +3053,7 @@ static int ext4_da_write_end(struct file *file, struct page *page, void *fsdata) { struct inode *inode = mapping->host; - int ret = 0, ret2; + int ret; handle_t *handle = ext4_journal_current_handle(); loff_t new_i_size; unsigned long start, end; @@ -3083,6 +3064,12 @@ static int ext4_da_write_end(struct file *file, len, copied, page, fsdata); trace_ext4_da_write_end(inode, pos, len, copied); + + if (write_mode != CONVERT_INLINE_DATA && + ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) && + ext4_has_inline_data(inode)) + return ext4_write_inline_data_end(inode, pos, len, copied, page); + start = pos & (PAGE_SIZE - 1); end = start + copied - 1; @@ -3102,26 +3089,12 @@ static int ext4_da_write_end(struct file *file, * ext4_da_write_inline_data_end(). */ new_i_size = pos + copied; - if (copied && new_i_size > inode->i_size) { - if (ext4_has_inline_data(inode) || - ext4_da_should_update_i_disksize(page, end)) - ext4_update_i_disksize(inode, new_i_size); - } - - if (write_mode != CONVERT_INLINE_DATA && - ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) && - ext4_has_inline_data(inode)) - ret = ext4_da_write_inline_data_end(inode, pos, len, copied, - page); - else - ret = generic_write_end(file, mapping, pos, len, copied, - page, fsdata); - - copied = ret; - ret2 = ext4_journal_stop(handle); - if (unlikely(ret2 && !ret)) - ret = ret2; + if (copied && new_i_size > inode->i_size && + ext4_da_should_update_i_disksize(page, end)) + ext4_update_i_disksize(inode, new_i_size); + copied = generic_write_end(file, mapping, pos, len, copied, page, fsdata); + ret = ext4_journal_stop(handle); return ret ? ret : copied; } -- cgit From cc883236b79297f6266ca6f4e7f24f3fd3c736c1 Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Fri, 16 Jul 2021 20:20:24 +0800 Subject: ext4: drop unnecessary journal handle in delalloc write After we factor out the inline data write procedure from ext4_da_write_end(), we don't need to start journal handle for the cases of both buffer overwrite and append-write. If we need to update i_disksize, mark_inode_dirty() do start handle and update inode buffer. So we could just remove all the journal handle codes in the delalloc write procedure. After this patch, we could get a lot of performance improvement. Below is the Unixbench comparison data test on my machine with 'Intel Xeon Gold 5120' CPU and nvme SSD backend. Test cmd: ./Run -c 56 -i 3 fstime fsbuffer fsdisk Before this patch: System Benchmarks Partial Index BASELINE RESULT INDEX File Copy 1024 bufsize 2000 maxblocks 3960.0 422965.0 1068.1 File Copy 256 bufsize 500 maxblocks 1655.0 105077.0 634.9 File Copy 4096 bufsize 8000 maxblocks 5800.0 1429092.0 2464.0 ====== System Benchmarks Index Score (Partial Only) 1186.6 After this patch: System Benchmarks Partial Index BASELINE RESULT INDEX File Copy 1024 bufsize 2000 maxblocks 3960.0 732716.0 1850.3 File Copy 256 bufsize 500 maxblocks 1655.0 184940.0 1117.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 2427152.0 4184.7 ====== System Benchmarks Index Score (Partial Only) 2053.0 Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210716122024.1105856-5-yi.zhang@huawei.com --- fs/ext4/inode.c | 60 +++++---------------------------------------------------- 1 file changed, 5 insertions(+), 55 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index b80f15bba727..502f60621bad 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2910,19 +2910,6 @@ static int ext4_nonda_switch(struct super_block *sb) return 0; } -/* We always reserve for an inode update; the superblock could be there too */ -static int ext4_da_write_credits(struct inode *inode, loff_t pos, unsigned len) -{ - if (likely(ext4_has_feature_large_file(inode->i_sb))) - return 1; - - if (pos + len <= 0x7fffffffULL) - return 1; - - /* We might need to update the superblock to set LARGE_FILE */ - return 2; -} - static int ext4_da_write_begin(struct file *file, struct address_space *mapping, loff_t pos, unsigned len, unsigned flags, struct page **pagep, void **fsdata) @@ -2931,7 +2918,6 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping, struct page *page; pgoff_t index; struct inode *inode = mapping->host; - handle_t *handle; if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) return -EIO; @@ -2957,41 +2943,11 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping, return 0; } - /* - * grab_cache_page_write_begin() can take a long time if the - * system is thrashing due to memory pressure, or if the page - * is being written back. So grab it first before we start - * the transaction handle. This also allows us to allocate - * the page (if needed) without using GFP_NOFS. - */ -retry_grab: +retry: page = grab_cache_page_write_begin(mapping, index, flags); if (!page) return -ENOMEM; - unlock_page(page); - - /* - * With delayed allocation, we don't log the i_disksize update - * if there is delayed block allocation. But we still need - * to journalling the i_disksize update if writes to the end - * of file which has an already mapped buffer. - */ -retry_journal: - handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE, - ext4_da_write_credits(inode, pos, len)); - if (IS_ERR(handle)) { - put_page(page); - return PTR_ERR(handle); - } - lock_page(page); - if (page->mapping != mapping) { - /* The page got truncated from under us */ - unlock_page(page); - put_page(page); - ext4_journal_stop(handle); - goto retry_grab; - } /* In case writeback began while the page was unlocked */ wait_for_stable_page(page); @@ -3003,20 +2959,18 @@ retry_journal: #endif if (ret < 0) { unlock_page(page); - ext4_journal_stop(handle); + put_page(page); /* * block_write_begin may have instantiated a few blocks * outside i_size. Trim these off again. Don't need - * i_size_read because we hold i_mutex. + * i_size_read because we hold inode lock. */ if (pos + len > inode->i_size) ext4_truncate_failed_write(inode); if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) - goto retry_journal; - - put_page(page); + goto retry; return ret; } @@ -3053,8 +3007,6 @@ static int ext4_da_write_end(struct file *file, struct page *page, void *fsdata) { struct inode *inode = mapping->host; - int ret; - handle_t *handle = ext4_journal_current_handle(); loff_t new_i_size; unsigned long start, end; int write_mode = (int)(unsigned long)fsdata; @@ -3093,9 +3045,7 @@ static int ext4_da_write_end(struct file *file, ext4_da_should_update_i_disksize(page, end)) ext4_update_i_disksize(inode, new_i_size); - copied = generic_write_end(file, mapping, pos, len, copied, page, fsdata); - ret = ext4_journal_stop(handle); - return ret ? ret : copied; + return generic_write_end(file, mapping, pos, len, copied, page, fsdata); } /* -- cgit From 31692ab9a9ef0119959f66838de74eeb37490c8d Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Thu, 5 Aug 2021 21:04:16 +0200 Subject: media: hantro: Fix check for single irq Some cores use only one interrupt and in such case interrupt name in DT is not needed. Driver supposedly accounted that, but due to the wrong field check it never worked. Fix that. Fixes: 18d6c8b7b4c9 ("media: hantro: add fallback handling for single irq/clk") Signed-off-by: Jernej Skrabec Reviewed-by: Ezequiel Garcia Reviewed-by: Emil Velikov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/hantro/hantro_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c index 8a2edd67f2c6..20e508158871 100644 --- a/drivers/staging/media/hantro/hantro_drv.c +++ b/drivers/staging/media/hantro/hantro_drv.c @@ -919,7 +919,7 @@ static int hantro_probe(struct platform_device *pdev) if (!vpu->variant->irqs[i].handler) continue; - if (vpu->variant->num_clocks > 1) { + if (vpu->variant->num_irqs > 1) { irq_name = vpu->variant->irqs[i].name; irq = platform_get_irq_byname(vpu->pdev, irq_name); } else { -- cgit From 132c88614f2b3548cd3c8979a434609019db4151 Mon Sep 17 00:00:00 2001 From: Nicolas Dufresne Date: Thu, 19 Aug 2021 16:00:09 +0200 Subject: media: cedrus: Fix SUNXI tile size calculation Tiled formats requires full rows being allocated (even for Chroma planes). When the number of Luma tiles is odd, we need to round up to twice the tile width in order to roundup the number of Chroma tiles. This was notice with a crash running BA1_FT_C compliance test using sunxi tiles using GStreamer. Cedrus driver would allocate 9 rows for Luma, but only 4.5 rows for Chroma, causing userspace to crash. Signed-off-by: Nicolas Dufresne Fixes: 50e761516f2b8 ("media: platform: Add Cedrus VPU decoder driver") Reviewed-by: Jernej Skrabec Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/sunxi/cedrus/cedrus_video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c index c589fe9dae70..825af5fd35e0 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c @@ -135,7 +135,7 @@ void cedrus_prepare_format(struct v4l2_pix_format *pix_fmt) sizeimage = bytesperline * height; /* Chroma plane size. */ - sizeimage += bytesperline * height / 2; + sizeimage += bytesperline * ALIGN(height, 64) / 2; break; -- cgit From 26391e49d5b0f0c33eb4b28a312d2ecc094d7489 Mon Sep 17 00:00:00 2001 From: Vincent Whitchurch Date: Wed, 25 Aug 2021 13:42:13 +0200 Subject: mmc: dw_mmc: Only inject fault before done/error The fault injection function can set EVENT_DATA_ERROR but skip the setting of ->data_status to an error status if it hits just after a data over interrupt. This confuses the tasklet which can later end up triggering the WARN_ON(host->cmd || ..) in dw_mci_request_end() since dw_mci_data_complete() would return success. Prevent the fault injection function from doing this since this is not a real case, and ensure that the fault injection doesn't race with a real error either. Signed-off-by: Vincent Whitchurch Reviewed-by: Jaehoon Chung Fixes: 2b8ac062f337 ("mmc: dw_mmc: Add data CRC error injection") Link: https://lore.kernel.org/r/20210825114213.7429-1-vincent.whitchurch@axis.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 6578cc64ae9e..380f9aa56eb2 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1802,10 +1802,15 @@ static enum hrtimer_restart dw_mci_fault_timer(struct hrtimer *t) spin_lock_irqsave(&host->irq_lock, flags); - if (!host->data_status) + /* + * Only inject an error if we haven't already got an error or data over + * interrupt. + */ + if (!host->data_status) { host->data_status = SDMMC_INT_DCRC; - set_bit(EVENT_DATA_ERROR, &host->pending_events); - tasklet_schedule(&host->tasklet); + set_bit(EVENT_DATA_ERROR, &host->pending_events); + tasklet_schedule(&host->tasklet); + } spin_unlock_irqrestore(&host->irq_lock, flags); @@ -2721,12 +2726,16 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) } if (pending & DW_MCI_DATA_ERROR_FLAGS) { + spin_lock(&host->irq_lock); + /* if there is an error report DATA_ERROR */ mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS); host->data_status = pending; smp_wmb(); /* drain writebuffer */ set_bit(EVENT_DATA_ERROR, &host->pending_events); tasklet_schedule(&host->tasklet); + + spin_unlock(&host->irq_lock); } if (pending & SDMMC_INT_DATA_OVER) { -- cgit From b81bede4d138ce62f7342e27bf55ac93c8071818 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 26 Aug 2021 10:21:07 +0200 Subject: mmc: renesas_sdhi: fix regression with hard reset on old SDHIs Old SDHI instances have a default value for the reset register which keeps it in reset state by default. So, when applying a hard reset we need to manually leave the soft reset state as well. Later SDHI instances have a different default value, the one we write manually now. Fixes: b4d86f37eacb ("mmc: renesas_sdhi: do hard reset if possible") Signed-off-by: Wolfram Sang Tested-by: Geert Uytterhoeven Reported-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210826082107.47299-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/renesas_sdhi_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index 6fc4cf3c9dce..a4407f391f66 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -561,6 +561,8 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host) /* Unknown why but without polling reset status, it will hang */ read_poll_timeout(reset_control_status, ret, ret == 0, 1, 100, false, priv->rstc); + /* At least SDHI_VER_GEN2_SDR50 needs manual release of reset */ + sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); priv->needs_adjust_hs400 = false; renesas_sdhi_set_clock(host, host->clk_cache); } else if (priv->scc_ctl) { -- cgit From 3ad02c27d89d72b3b49ac51899144b7d0942f05f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 7 Sep 2021 06:40:22 +0200 Subject: media: s5p-jpeg: rename JPEG marker constants to prevent build warnings The use of a macro named 'RST' conflicts with one of the same name in arch/mips/include/asm/mach-rc32434/rb.h. This causes build warnings on some MIPS builds. Change the names of the JPEG marker constants to be in their own namespace to fix these build warnings and to prevent other similar problems in the future. Fixes these build warnings: In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:14: ../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined 43 | #define RST 0xd0 | ../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition 13 | #define RST (1 << 15) In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c:13: ../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined 43 | #define RST 0xd0 ../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition 13 | #define RST (1 << 15) In file included from ../drivers/media/platform/s5p-jpeg/jpeg-hw-exynos4.c:12: ../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined 43 | #define RST 0xd0 ../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition 13 | #define RST (1 << 15) In file included from ../drivers/media/platform/s5p-jpeg/jpeg-core.c:31: ../drivers/media/platform/s5p-jpeg/jpeg-core.h:43: warning: "RST" redefined 43 | #define RST 0xd0 ../arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition 13 | #define RST (1 << 15) Also update the kernel-doc so that the word "marker" is not repeated. Link: https://lore.kernel.org/linux-media/20210907044022.30602-1-rdunlap@infradead.org Fixes: bb677f3ac434 ("[media] Exynos4 JPEG codec v4l2 driver") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Andrzej Pietrasiewicz Cc: Jacek Anaszewski Cc: Sylwester Nawrocki Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-jpeg/jpeg-core.c | 18 +++++++++--------- drivers/media/platform/s5p-jpeg/jpeg-core.h | 28 ++++++++++++++-------------- 2 files changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c index d402e456f27d..7d0ab19c38bb 100644 --- a/drivers/media/platform/s5p-jpeg/jpeg-core.c +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c @@ -1140,8 +1140,8 @@ static bool s5p_jpeg_parse_hdr(struct s5p_jpeg_q_data *result, continue; length = 0; switch (c) { - /* SOF0: baseline JPEG */ - case SOF0: + /* JPEG_MARKER_SOF0: baseline JPEG */ + case JPEG_MARKER_SOF0: if (get_word_be(&jpeg_buffer, &word)) break; length = (long)word - 2; @@ -1172,7 +1172,7 @@ static bool s5p_jpeg_parse_hdr(struct s5p_jpeg_q_data *result, notfound = 0; break; - case DQT: + case JPEG_MARKER_DQT: if (get_word_be(&jpeg_buffer, &word)) break; length = (long)word - 2; @@ -1185,7 +1185,7 @@ static bool s5p_jpeg_parse_hdr(struct s5p_jpeg_q_data *result, skip(&jpeg_buffer, length); break; - case DHT: + case JPEG_MARKER_DHT: if (get_word_be(&jpeg_buffer, &word)) break; length = (long)word - 2; @@ -1198,15 +1198,15 @@ static bool s5p_jpeg_parse_hdr(struct s5p_jpeg_q_data *result, skip(&jpeg_buffer, length); break; - case SOS: + case JPEG_MARKER_SOS: sos = jpeg_buffer.curr - 2; /* 0xffda */ break; /* skip payload-less markers */ - case RST ... RST + 7: - case SOI: - case EOI: - case TEM: + case JPEG_MARKER_RST ... JPEG_MARKER_RST + 7: + case JPEG_MARKER_SOI: + case JPEG_MARKER_EOI: + case JPEG_MARKER_TEM: break; /* skip uninteresting payload markers */ diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.h b/drivers/media/platform/s5p-jpeg/jpeg-core.h index a77d93c098ce..8473a019bb5f 100644 --- a/drivers/media/platform/s5p-jpeg/jpeg-core.h +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h @@ -37,15 +37,15 @@ #define EXYNOS3250_IRQ_TIMEOUT 0x10000000 /* a selection of JPEG markers */ -#define TEM 0x01 -#define SOF0 0xc0 -#define DHT 0xc4 -#define RST 0xd0 -#define SOI 0xd8 -#define EOI 0xd9 -#define SOS 0xda -#define DQT 0xdb -#define DHP 0xde +#define JPEG_MARKER_TEM 0x01 +#define JPEG_MARKER_SOF0 0xc0 +#define JPEG_MARKER_DHT 0xc4 +#define JPEG_MARKER_RST 0xd0 +#define JPEG_MARKER_SOI 0xd8 +#define JPEG_MARKER_EOI 0xd9 +#define JPEG_MARKER_SOS 0xda +#define JPEG_MARKER_DQT 0xdb +#define JPEG_MARKER_DHP 0xde /* Flags that indicate a format can be used for capture/output */ #define SJPEG_FMT_FLAG_ENC_CAPTURE (1 << 0) @@ -187,11 +187,11 @@ struct s5p_jpeg_marker { * @fmt: driver-specific format of this queue * @w: image width * @h: image height - * @sos: SOS marker's position relative to the buffer beginning - * @dht: DHT markers' positions relative to the buffer beginning - * @dqt: DQT markers' positions relative to the buffer beginning - * @sof: SOF0 marker's position relative to the buffer beginning - * @sof_len: SOF0 marker's payload length (without length field itself) + * @sos: JPEG_MARKER_SOS's position relative to the buffer beginning + * @dht: JPEG_MARKER_DHT' positions relative to the buffer beginning + * @dqt: JPEG_MARKER_DQT' positions relative to the buffer beginning + * @sof: JPEG_MARKER_SOF0's position relative to the buffer beginning + * @sof_len: JPEG_MARKER_SOF0's payload length (without length field itself) * @size: image buffer size in bytes */ struct s5p_jpeg_q_data { -- cgit From 58eafe1ff52ee1ce255759fc15729519af180cbb Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 7 Sep 2021 13:44:36 -0500 Subject: ASoC: Intel: sof_sdw: tag SoundWire BEs as non-atomic The SoundWire BEs make use of 'stream' functions for .prepare and .trigger. These functions will in turn force a Bank Switch, which implies a wait operation. Mark SoundWire BEs as nonatomic for consistency, but keep all other types of BEs as is. The initialization of .nonatomic is done outside of the create_sdw_dailink helper to avoid adding more parameters to deal with a single exception to the rule that BEs are atomic. Suggested-by: Takashi Iwai Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Ranjani Sridharan Reviewed-by: Bard Liao Link: https://lore.kernel.org/r/20210907184436.33152-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/sof_sdw.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index 6602eda89e8e..6b06248a9327 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -929,6 +929,11 @@ static int create_sdw_dailink(struct snd_soc_card *card, cpus + *cpu_id, cpu_dai_num, codecs, codec_num, NULL, &sdw_ops); + /* + * SoundWire DAILINKs use 'stream' functions and Bank Switch operations + * based on wait_for_completion(), tag them as 'nonatomic'. + */ + dai_links[*be_index].nonatomic = true; ret = set_codec_init_func(card, link, dai_links + (*be_index)++, playback, group_id); -- cgit From 5a80dea93191d55840f42252ed3e4565a125a514 Mon Sep 17 00:00:00 2001 From: Trevor Wu Date: Thu, 9 Sep 2021 14:55:33 +0800 Subject: ASoC: mediatek: add required config dependency Because SND_SOC_MT8195 depends on COMPILE_TEST, it's possible to build MT8195 driver in many different config combinations. Add all dependent config for SND_SOC_MT8195 in case some errors happen when COMPILE_TEST is enabled. Signed-off-by: Trevor Wu Reported-by: Randy Dunlap Link: https://lore.kernel.org/r/20210909065533.2114-1-trevor.wu@mediatek.com Signed-off-by: Mark Brown --- sound/soc/mediatek/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/mediatek/Kconfig b/sound/soc/mediatek/Kconfig index 5a2f4667d50b..81ad2dcee9eb 100644 --- a/sound/soc/mediatek/Kconfig +++ b/sound/soc/mediatek/Kconfig @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config SND_SOC_MEDIATEK tristate + select REGMAP_MMIO config SND_SOC_MT2701 tristate "ASoC support for Mediatek MT2701 chip" @@ -188,7 +189,9 @@ config SND_SOC_MT8192_MT6359_RT1015_RT5682 config SND_SOC_MT8195 tristate "ASoC support for Mediatek MT8195 chip" depends on ARCH_MEDIATEK || COMPILE_TEST + depends on COMMON_CLK select SND_SOC_MEDIATEK + select MFD_SYSCON if SND_SOC_MT6359 help This adds ASoC platform driver support for Mediatek MT8195 chip that can be used with other codecs. -- cgit From 2bab94090b01bc593d8bc25f68df41f198721173 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 6 Sep 2021 21:53:58 -0700 Subject: spi: tegra20-slink: Declare runtime suspend and resume functions conditionally The following build error is seen with CONFIG_PM=n. drivers/spi/spi-tegra20-slink.c:1188:12: error: 'tegra_slink_runtime_suspend' defined but not used drivers/spi/spi-tegra20-slink.c:1200:12: error: 'tegra_slink_runtime_resume' defined but not used Declare the functions only if PM is enabled. While at it, remove the unnecessary forward declarations. Signed-off-by: Guenter Roeck Reviewed-by: Geert Uytterhoeven Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20210907045358.2138282-1-linux@roeck-us.net Signed-off-by: Mark Brown --- drivers/spi/spi-tegra20-slink.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index ebd27f883033..8ce840c7ecc8 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -204,9 +204,6 @@ struct tegra_slink_data { struct dma_async_tx_descriptor *tx_dma_desc; }; -static int tegra_slink_runtime_suspend(struct device *dev); -static int tegra_slink_runtime_resume(struct device *dev); - static inline u32 tegra_slink_readl(struct tegra_slink_data *tspi, unsigned long reg) { @@ -1185,6 +1182,7 @@ static int tegra_slink_resume(struct device *dev) } #endif +#ifdef CONFIG_PM static int tegra_slink_runtime_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); @@ -1210,6 +1208,7 @@ static int tegra_slink_runtime_resume(struct device *dev) } return 0; } +#endif /* CONFIG_PM */ static const struct dev_pm_ops slink_pm_ops = { SET_RUNTIME_PM_OPS(tegra_slink_runtime_suspend, -- cgit From 0add491df4e5e2c8cc6eeeaa6dbcca50f932090c Mon Sep 17 00:00:00 2001 From: Eric Whitney Date: Thu, 19 Aug 2021 10:49:26 -0400 Subject: ext4: remove extent cache entries when truncating inline data Conditionally remove all cached extents belonging to an inode when truncating its inline data. It's only necessary to attempt to remove cached extents when a conversion from inline to extent storage has been initiated (!EXT4_STATE_MAY_INLINE_DATA). This avoids unnecessary es lock overhead in the more common inline case. Signed-off-by: Eric Whitney Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210819144927.25163-2-enwlinux@gmail.com Signed-off-by: Theodore Ts'o --- fs/ext4/inline.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index 50a3031bf466..39a1ab129fdc 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -7,6 +7,7 @@ #include #include #include +#include #include "ext4_jbd2.h" #include "ext4.h" @@ -1918,6 +1919,24 @@ int ext4_inline_data_truncate(struct inode *inode, int *has_inline) EXT4_I(inode)->i_disksize = i_size; if (i_size < inline_size) { + /* + * if there's inline data to truncate and this file was + * converted to extents after that inline data was written, + * the extent status cache must be cleared to avoid leaving + * behind stale delayed allocated extent entries + */ + if (!ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) { +retry: + err = ext4_es_remove_extent(inode, 0, EXT_MAX_BLOCKS); + if (err == -ENOMEM) { + cond_resched(); + congestion_wait(BLK_RW_ASYNC, HZ/50); + goto retry; + } + if (err) + goto out_error; + } + /* Clear the content in the xattr space. */ if (inline_size > EXT4_MIN_INLINE_DATA_SIZE) { if ((err = ext4_xattr_ibody_find(inode, &i, &is)) != 0) -- cgit From 948ca5f30e1df0c11eb5b0f410b9ceb97fa77ad9 Mon Sep 17 00:00:00 2001 From: Eric Whitney Date: Thu, 19 Aug 2021 10:49:27 -0400 Subject: ext4: enforce buffer head state assertion in ext4_da_map_blocks Remove the code that re-initializes a buffer head with an invalid block number and BH_New and BH_Delay bits when a matching delayed and unwritten block has been found in the extent status cache. Replace it with assertions that verify the buffer head already has this state correctly set. The current code masked an inline data truncation bug that left stale entries in the extent status cache. With this change, generic/130 can be used to reproduce and detect that bug. Signed-off-by: Eric Whitney Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210819144927.25163-3-enwlinux@gmail.com Signed-off-by: Theodore Ts'o --- fs/ext4/inode.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 8204176256c8..2a076d236ba1 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1706,13 +1706,16 @@ static int ext4_da_map_blocks(struct inode *inode, sector_t iblock, } /* - * Delayed extent could be allocated by fallocate. - * So we need to check it. + * the buffer head associated with a delayed and not unwritten + * block found in the extent status cache must contain an + * invalid block number and have its BH_New and BH_Delay bits + * set, reflecting the state assigned when the block was + * initially delayed allocated */ - if (ext4_es_is_delayed(&es) && !ext4_es_is_unwritten(&es)) { - map_bh(bh, inode->i_sb, invalid_block); - set_buffer_new(bh); - set_buffer_delay(bh); + if (ext4_es_is_delonly(&es)) { + BUG_ON(bh->b_blocknr != invalid_block); + BUG_ON(!buffer_new(bh)); + BUG_ON(!buffer_delay(bh)); return 0; } -- cgit From 26be23af1866eead5a29f8501f9d774ac277d0bd Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Thu, 9 Sep 2021 16:54:49 +0200 Subject: MAINTAINERS: fix update references to stm32 audio bindings The 00d38fd8d2524 ("MAINTAINERS: update references to stm32 audio bindings") commit update the bindings reference, by removing bindings/sound/st,stm32-adfsdm.txt, to set the new reference to bindings/iio/adc/st,stm32-*.yaml. This leads to "get_maintainer finds" the match for the Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml, but also to the IIO bindings Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml And The commit fixes only a part of the problem: Documentation/devicetree/bindings/sound/st,stm32-*.txt file have been also moved to yaml. Update references to include all stm32 audio bindings file and exclude the st,stm32-adc.yaml bindings file. cc: Mauro Carvalho Chehab Fixes: 0d38fd8d2524 ("MAINTAINERS: update references to stm32 audio bindings") Signed-off-by: Arnaud Pouliquen Link: https://lore.kernel.org/r/20210909145449.24388-1-arnaud.pouliquen@foss.st.com Signed-off-by: Mark Brown --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index c6b8a720c0bc..33d99e9cf3e1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17718,7 +17718,8 @@ M: Olivier Moysan M: Arnaud Pouliquen L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Maintained -F: Documentation/devicetree/bindings/iio/adc/st,stm32-*.yaml +F: Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +F: Documentation/devicetree/bindings/sound/st,stm32-*.yaml F: sound/soc/stm/ STM32 TIMER/LPTIMER DRIVERS -- cgit From 9c3ad33b5a412d8bc0a377e7cd9baa53ed52f22d Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 3 Sep 2021 18:30:02 +0800 Subject: ASoC: fsl_sai: register platform component before registering cpu dai There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 435508214942 ("ASoC: Add SAI SoC Digital Audio Interface driver") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630665006-31437-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_sai.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 223fcd15bfcc..38f6362099d5 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -1152,11 +1152,10 @@ static int fsl_sai_probe(struct platform_device *pdev) if (ret < 0) goto err_pm_get_sync; - ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component, - &sai->cpu_dai_drv, 1); - if (ret) - goto err_pm_get_sync; - + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ if (sai->soc_data->use_imx_pcm) { ret = imx_pcm_dma_init(pdev, IMX_SAI_DMABUF_SIZE); if (ret) @@ -1167,6 +1166,11 @@ static int fsl_sai_probe(struct platform_device *pdev) goto err_pm_get_sync; } + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component, + &sai->cpu_dai_drv, 1); + if (ret) + goto err_pm_get_sync; + return ret; err_pm_get_sync: -- cgit From f12ce92e98b21c1fc669cd74e12c54a0fe3bc2eb Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 3 Sep 2021 18:30:03 +0800 Subject: ASoC: fsl_esai: register platform component before registering cpu dai There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630665006-31437-3-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_esai.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index a961f837cd09..bda66b30e063 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -1073,6 +1073,16 @@ static int fsl_esai_probe(struct platform_device *pdev) if (ret < 0) goto err_pm_get_sync; + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ + ret = imx_pcm_dma_init(pdev, IMX_ESAI_DMABUF_SIZE); + if (ret) { + dev_err(&pdev->dev, "failed to init imx pcm dma: %d\n", ret); + goto err_pm_get_sync; + } + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_esai_component, &fsl_esai_dai, 1); if (ret) { @@ -1082,12 +1092,6 @@ static int fsl_esai_probe(struct platform_device *pdev) INIT_WORK(&esai_priv->work, fsl_esai_hw_reset); - ret = imx_pcm_dma_init(pdev, IMX_ESAI_DMABUF_SIZE); - if (ret) { - dev_err(&pdev->dev, "failed to init imx pcm dma: %d\n", ret); - goto err_pm_get_sync; - } - return ret; err_pm_get_sync: -- cgit From 0adf292069dcca8bab76a603251fcaabf77468ca Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 3 Sep 2021 18:30:04 +0800 Subject: ASoC: fsl_micfil: register platform component before registering cpu dai There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 47a70e6fc9a8 ("ASoC: Add MICFIL SoC Digital Audio Interface driver.") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630665006-31437-4-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_micfil.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index 8c0c75ce9490..9f90989ac59a 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -737,18 +737,23 @@ static int fsl_micfil_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); regcache_cache_only(micfil->regmap, true); + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ + ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); + if (ret) { + dev_err(&pdev->dev, "failed to pcm register\n"); + return ret; + } + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_micfil_component, &fsl_micfil_dai, 1); if (ret) { dev_err(&pdev->dev, "failed to register component %s\n", fsl_micfil_component.name); - return ret; } - ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); - if (ret) - dev_err(&pdev->dev, "failed to pcm register\n"); - return ret; } -- cgit From ee8ccc2eb5840e34fce088bdb174fd5329153ef0 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 3 Sep 2021 18:30:05 +0800 Subject: ASoC: fsl_spdif: register platform component before registering cpu dai There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: a2388a498ad2 ("ASoC: fsl: Add S/PDIF CPU DAI driver") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630665006-31437-5-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_spdif.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 8ffb1a6048d6..1c53719bb61e 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -1434,16 +1434,20 @@ static int fsl_spdif_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); regcache_cache_only(spdif_priv->regmap, true); - ret = devm_snd_soc_register_component(&pdev->dev, &fsl_spdif_component, - &spdif_priv->cpu_dai_drv, 1); + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ + ret = imx_pcm_dma_init(pdev, IMX_SPDIF_DMABUF_SIZE); if (ret) { - dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); + dev_err_probe(&pdev->dev, ret, "imx_pcm_dma_init failed\n"); goto err_pm_disable; } - ret = imx_pcm_dma_init(pdev, IMX_SPDIF_DMABUF_SIZE); + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_spdif_component, + &spdif_priv->cpu_dai_drv, 1); if (ret) { - dev_err_probe(&pdev->dev, ret, "imx_pcm_dma_init failed\n"); + dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); goto err_pm_disable; } -- cgit From c590fa80b39287a91abeb487829f3190e7ae775f Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 3 Sep 2021 18:30:06 +0800 Subject: ASoC: fsl_xcvr: register platform component before registering cpu dai There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 28564486866f ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630665006-31437-6-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_xcvr.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index 31c5ee641fe7..7ba2fd15132d 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -1215,18 +1215,23 @@ static int fsl_xcvr_probe(struct platform_device *pdev) pm_runtime_enable(dev); regcache_cache_only(xcvr->regmap, true); + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ + ret = devm_snd_dmaengine_pcm_register(dev, NULL, 0); + if (ret) { + dev_err(dev, "failed to pcm register\n"); + return ret; + } + ret = devm_snd_soc_register_component(dev, &fsl_xcvr_comp, &fsl_xcvr_dai, 1); if (ret) { dev_err(dev, "failed to register component %s\n", fsl_xcvr_comp.name); - return ret; } - ret = devm_snd_dmaengine_pcm_register(dev, NULL, 0); - if (ret) - dev_err(dev, "failed to pcm register\n"); - return ret; } -- cgit From 1dd038522615b70f5f8945c5631e9e2fa5bd58b1 Mon Sep 17 00:00:00 2001 From: Trevor Wu Date: Fri, 10 Sep 2021 17:26:13 +0800 Subject: ASoC: mediatek: common: handle NULL case in suspend/resume function When memory allocation for afe->reg_back_up fails, reg_back_up can't be used. Keep the suspend/resume flow but skip register backup when afe->reg_back_up is NULL, in case illegal memory access happens. Fixes: 283b612429a2 ("ASoC: mediatek: implement mediatek common structure") Signed-off-by: Trevor Wu Reported-by: Dan Carpenter Link: https://lore.kernel.org/r/20210910092613.30188-1-trevor.wu@mediatek.com Signed-off-by: Mark Brown --- sound/soc/mediatek/common/mtk-afe-fe-dai.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/sound/soc/mediatek/common/mtk-afe-fe-dai.c b/sound/soc/mediatek/common/mtk-afe-fe-dai.c index baaa5881b1d4..e95c7c018e7d 100644 --- a/sound/soc/mediatek/common/mtk-afe-fe-dai.c +++ b/sound/soc/mediatek/common/mtk-afe-fe-dai.c @@ -334,9 +334,11 @@ int mtk_afe_suspend(struct snd_soc_component *component) devm_kcalloc(dev, afe->reg_back_up_list_num, sizeof(unsigned int), GFP_KERNEL); - for (i = 0; i < afe->reg_back_up_list_num; i++) - regmap_read(regmap, afe->reg_back_up_list[i], - &afe->reg_back_up[i]); + if (afe->reg_back_up) { + for (i = 0; i < afe->reg_back_up_list_num; i++) + regmap_read(regmap, afe->reg_back_up_list[i], + &afe->reg_back_up[i]); + } afe->suspended = true; afe->runtime_suspend(dev); @@ -356,12 +358,13 @@ int mtk_afe_resume(struct snd_soc_component *component) afe->runtime_resume(dev); - if (!afe->reg_back_up) + if (!afe->reg_back_up) { dev_dbg(dev, "%s no reg_backup\n", __func__); - - for (i = 0; i < afe->reg_back_up_list_num; i++) - mtk_regmap_write(regmap, afe->reg_back_up_list[i], - afe->reg_back_up[i]); + } else { + for (i = 0; i < afe->reg_back_up_list_num; i++) + mtk_regmap_write(regmap, afe->reg_back_up_list[i], + afe->reg_back_up[i]); + } afe->suspended = false; return 0; -- cgit From 345e1ae0c6ba54f6a4d32154e80cadc2ee2ef1af Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 27 Aug 2021 23:22:02 +0100 Subject: afs: Fix missing put on afs_read objects and missing get on the key therein The afs_read objects created by afs_req_issue_op() get leaked because afs_alloc_read() returns a ref and then afs_fetch_data() gets its own ref which is released when the operation completes, but the initial ref is never released. Fix this by discarding the initial ref at the end of afs_req_issue_op(). This leak also covered another bug whereby a ref isn't got on the key attached to the read record by afs_req_issue_op(). This isn't a problem as long as the afs_read req never goes away... Fix this by calling key_get() in afs_req_issue_op(). This was found by the generic/074 test. It leaks a bunch of kmalloc-192 objects each time it is run, which can be observed by watching /proc/slabinfo. Fixes: f7605fa869cf ("afs: Fix leak of afs_read objects") Reported-by: Marc Dionne Signed-off-by: David Howells Reviewed-and-tested-by: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163010394740.3035676.8516846193899793357.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/163111665914.283156.3038561975681836591.stgit@warthog.procyon.org.uk/ --- fs/afs/file.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/afs/file.c b/fs/afs/file.c index db035ae2a134..6688fff14b0b 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -295,7 +295,7 @@ static void afs_req_issue_op(struct netfs_read_subrequest *subreq) fsreq->subreq = subreq; fsreq->pos = subreq->start + subreq->transferred; fsreq->len = subreq->len - subreq->transferred; - fsreq->key = subreq->rreq->netfs_priv; + fsreq->key = key_get(subreq->rreq->netfs_priv); fsreq->vnode = vnode; fsreq->iter = &fsreq->def_iter; @@ -304,6 +304,7 @@ static void afs_req_issue_op(struct netfs_read_subrequest *subreq) fsreq->pos, fsreq->len); afs_fetch_data(fsreq->vnode, fsreq); + afs_put_read(fsreq); } static int afs_symlink_readpage(struct page *page) -- cgit From 581b2027af0018944ba301d68e7af45c6d1128b5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 1 Sep 2021 09:15:21 +0100 Subject: afs: Fix page leak There's a loop in afs_extend_writeback() that adds extra pages to a write we want to make to improve the efficiency of the writeback by making it larger. This loop stops, however, if we hit a page we can't write back from immediately, but it doesn't get rid of the page ref we speculatively acquired. This was caused by the removal of the cleanup loop when the code switched from using find_get_pages_contig() to xarray scanning as the latter only gets a single page at a time, not a batch. Fix this by putting the page on a ref on an early break from the loop. Unfortunately, we can't just add that page to the pagevec we're employing as we'll go through that and add those pages to the RPC call. This was found by the generic/074 test. It leaks ~4GiB of RAM each time it is run - which can be observed with "top". Fixes: e87b03f5830e ("afs: Prepare for use of THPs") Reported-by: Marc Dionne Signed-off-by: David Howells Reviewed-and-tested-by: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111666635.283156.177701903478910460.stgit@warthog.procyon.org.uk/ --- fs/afs/write.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/afs/write.c b/fs/afs/write.c index c0534697268e..66b235266893 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -471,13 +471,18 @@ static void afs_extend_writeback(struct address_space *mapping, } /* Has the page moved or been split? */ - if (unlikely(page != xas_reload(&xas))) + if (unlikely(page != xas_reload(&xas))) { + put_page(page); break; + } - if (!trylock_page(page)) + if (!trylock_page(page)) { + put_page(page); break; + } if (!PageDirty(page) || PageWriteback(page)) { unlock_page(page); + put_page(page); break; } @@ -487,6 +492,7 @@ static void afs_extend_writeback(struct address_space *mapping, t = afs_page_dirty_to(page, priv); if (f != 0 && !new_content) { unlock_page(page); + put_page(page); break; } -- cgit From 23c69b90365c8280b627aa969393d828ff47ac14 Mon Sep 17 00:00:00 2001 From: suma hegde Date: Thu, 2 Sep 2021 23:11:54 +0530 Subject: hwmon: (k10temp) Remove residues of current and voltage Commit id "b00647c46c9d7f6ee1ff6aaf335906101755e614", adds reporting current and voltage to k10temp.c The commit id "0a4e668b5d52eed8026f5d717196b02b55fb2dc6", removed reporting current and voltage from k10temp.c The curr and in(voltage) entries are not removed from "k10temp_info" structure. Removing those residue entries. while at it, update k10temp driver documentation Signed-off-by: suma hegde Cc: Guenter Roeck Link: https://lore.kernel.org/r/20210902174155.7365-2-nchatrad@amd.com Signed-off-by: Guenter Roeck --- Documentation/hwmon/k10temp.rst | 17 ----------------- drivers/hwmon/k10temp.c | 6 ------ 2 files changed, 23 deletions(-) diff --git a/Documentation/hwmon/k10temp.rst b/Documentation/hwmon/k10temp.rst index 8557e26281c3..91b99adc6c48 100644 --- a/Documentation/hwmon/k10temp.rst +++ b/Documentation/hwmon/k10temp.rst @@ -132,20 +132,3 @@ On Family 17h and Family 18h CPUs, additional temperature sensors may report Core Complex Die (CCD) temperatures. Up to 8 such temperatures are reported as temp{3..10}_input, labeled Tccd{1..8}. Actual support depends on the CPU variant. - -Various Family 17h and 18h CPUs report voltage and current telemetry -information. The following attributes may be reported. - -Attribute Label Description -=============== ======= ================ -in0_input Vcore Core voltage -in1_input Vsoc SoC voltage -curr1_input Icore Core current -curr2_input Isoc SoC current -=============== ======= ================ - -Current values are raw (unscaled) as reported by the CPU. Core current is -reported as multiples of 1A / LSB. SoC is reported as multiples of 0.25A -/ LSB. The real current is board specific. Reported currents should be seen -as rough guidance, and should be scaled using sensors3.conf as appropriate -for a given board. diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index 38bc35ac8135..3618a924e78e 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -362,12 +362,6 @@ static const struct hwmon_channel_info *k10temp_info[] = { HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL), - HWMON_CHANNEL_INFO(in, - HWMON_I_INPUT | HWMON_I_LABEL, - HWMON_I_INPUT | HWMON_I_LABEL), - HWMON_CHANNEL_INFO(curr, - HWMON_C_INPUT | HWMON_C_LABEL, - HWMON_C_INPUT | HWMON_C_LABEL), NULL }; -- cgit From 64794d6db49730d22f440aef0cf4da98a56a4ea3 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 13 Sep 2021 11:10:42 +0900 Subject: ALSA: oxfw: fix transmission method for Loud models based on OXFW971 Loud Technologies Mackie Onyx 1640i (former model) is identified as the model which uses OXFW971. The analysis of packet dump shows that it transfers events in blocking method of IEC 61883-6, however the default behaviour of ALSA oxfw driver is for non-blocking method. This commit adds code to detect it assuming that all of loud models based on OXFW971 have such quirk. It brings no functional change except for alignment rule of PCM buffer. Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20210913021042.10085-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai --- sound/firewire/oxfw/oxfw.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c index cb5b5e3a481b..daf731364695 100644 --- a/sound/firewire/oxfw/oxfw.c +++ b/sound/firewire/oxfw/oxfw.c @@ -184,13 +184,16 @@ static int detect_quirks(struct snd_oxfw *oxfw, const struct ieee1394_device_id model = val; } - /* - * Mackie Onyx Satellite with base station has a quirk to report a wrong - * value in 'dbs' field of CIP header against its format information. - */ - if (vendor == VENDOR_LOUD && model == MODEL_SATELLITE) + if (vendor == VENDOR_LOUD) { + // Mackie Onyx Satellite with base station has a quirk to report a wrong + // value in 'dbs' field of CIP header against its format information. oxfw->quirks |= SND_OXFW_QUIRK_WRONG_DBS; + // OXFW971-based models may transfer events by blocking method. + if (!(oxfw->quirks & SND_OXFW_QUIRK_JUMBO_PAYLOAD)) + oxfw->quirks |= SND_OXFW_QUIRK_BLOCKING_TRANSMISSION; + } + return 0; } -- cgit From 3978d816523991dd86cf9aae88c295230a5ea3b2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 1 Sep 2021 19:22:50 +0100 Subject: afs: Add missing vnode validation checks afs_d_revalidate() should only be validating the directory entry it is given and the directory to which that belongs; it shouldn't be validating the inode/vnode to which that dentry points. Besides, validation need to be done even if we don't call afs_d_revalidate() - which might be the case if we're starting from a file descriptor. In order for afs_d_revalidate() to be fixed, validation points must be added in some other places. Certain directory operations, such as afs_unlink(), already check this, but not all and not all file operations either. Note that the validation of a vnode not only checks to see if the attributes we have are correct, but also gets a promise from the server to notify us if that file gets changed by a third party. Add the following checks: - Check the vnode we're going to make a hard link to. - Check the vnode we're going to move/rename. - Check the vnode we're going to read from. - Check the vnode we're going to write to. - Check the vnode we're going to sync. - Check the vnode we're going to make a mapped page writable for. Some of these aren't strictly necessary as we're going to perform a server operation that might get the attributes anyway from which we can determine if something changed - though it might not get us a callback promise. Signed-off-by: David Howells Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111667354.283156.12720698333342917516.stgit@warthog.procyon.org.uk/ --- fs/afs/dir.c | 11 +++++++++++ fs/afs/file.c | 16 +++++++++++++++- fs/afs/write.c | 17 +++++++++++++++-- 3 files changed, 41 insertions(+), 3 deletions(-) diff --git a/fs/afs/dir.c b/fs/afs/dir.c index ac829e63c570..a8e3ae55f1f9 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -1792,6 +1792,10 @@ static int afs_link(struct dentry *from, struct inode *dir, goto error; } + ret = afs_validate(vnode, op->key); + if (ret < 0) + goto error_op; + afs_op_set_vnode(op, 0, dvnode); afs_op_set_vnode(op, 1, vnode); op->file[0].dv_delta = 1; @@ -1805,6 +1809,8 @@ static int afs_link(struct dentry *from, struct inode *dir, op->create.reason = afs_edit_dir_for_link; return afs_do_sync_operation(op); +error_op: + afs_put_operation(op); error: d_drop(dentry); _leave(" = %d", ret); @@ -1989,6 +1995,11 @@ static int afs_rename(struct user_namespace *mnt_userns, struct inode *old_dir, if (IS_ERR(op)) return PTR_ERR(op); + ret = afs_validate(vnode, op->key); + op->error = ret; + if (ret < 0) + goto error; + afs_op_set_vnode(op, 0, orig_dvnode); afs_op_set_vnode(op, 1, new_dvnode); /* May be same as orig_dvnode */ op->file[0].dv_delta = 1; diff --git a/fs/afs/file.c b/fs/afs/file.c index 6688fff14b0b..4c8d786b53e0 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -24,12 +24,13 @@ static void afs_invalidatepage(struct page *page, unsigned int offset, static int afs_releasepage(struct page *page, gfp_t gfp_flags); static void afs_readahead(struct readahead_control *ractl); +static ssize_t afs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter); const struct file_operations afs_file_operations = { .open = afs_open, .release = afs_release, .llseek = generic_file_llseek, - .read_iter = generic_file_read_iter, + .read_iter = afs_file_read_iter, .write_iter = afs_file_write, .mmap = afs_file_mmap, .splice_read = generic_file_splice_read, @@ -503,3 +504,16 @@ static int afs_file_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_ops = &afs_vm_ops; return ret; } + +static ssize_t afs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter) +{ + struct afs_vnode *vnode = AFS_FS_I(file_inode(iocb->ki_filp)); + struct afs_file *af = iocb->ki_filp->private_data; + int ret; + + ret = afs_validate(vnode, af->key); + if (ret < 0) + return ret; + + return generic_file_read_iter(iocb, iter); +} diff --git a/fs/afs/write.c b/fs/afs/write.c index 66b235266893..32a764c24284 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -807,6 +807,7 @@ int afs_writepages(struct address_space *mapping, ssize_t afs_file_write(struct kiocb *iocb, struct iov_iter *from) { struct afs_vnode *vnode = AFS_FS_I(file_inode(iocb->ki_filp)); + struct afs_file *af = iocb->ki_filp->private_data; ssize_t result; size_t count = iov_iter_count(from); @@ -822,6 +823,10 @@ ssize_t afs_file_write(struct kiocb *iocb, struct iov_iter *from) if (!count) return 0; + result = afs_validate(vnode, af->key); + if (result < 0) + return result; + result = generic_file_write_iter(iocb, from); _leave(" = %zd", result); @@ -835,13 +840,18 @@ ssize_t afs_file_write(struct kiocb *iocb, struct iov_iter *from) */ int afs_fsync(struct file *file, loff_t start, loff_t end, int datasync) { - struct inode *inode = file_inode(file); - struct afs_vnode *vnode = AFS_FS_I(inode); + struct afs_vnode *vnode = AFS_FS_I(file_inode(file)); + struct afs_file *af = file->private_data; + int ret; _enter("{%llx:%llu},{n=%pD},%d", vnode->fid.vid, vnode->fid.vnode, file, datasync); + ret = afs_validate(vnode, af->key); + if (ret < 0) + return ret; + return file_write_and_wait_range(file, start, end); } @@ -855,11 +865,14 @@ vm_fault_t afs_page_mkwrite(struct vm_fault *vmf) struct file *file = vmf->vma->vm_file; struct inode *inode = file_inode(file); struct afs_vnode *vnode = AFS_FS_I(inode); + struct afs_file *af = file->private_data; unsigned long priv; vm_fault_t ret = VM_FAULT_RETRY; _enter("{{%llx:%llu}},{%lx}", vnode->fid.vid, vnode->fid.vnode, page->index); + afs_validate(vnode, af->key); + sb_start_pagefault(inode->i_sb); /* Wait for the page to be written to the cache before we allow it to -- cgit From 63d49d843ef5fffeea069e0ffdfbd2bf40ba01c6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 1 Sep 2021 18:11:33 +0100 Subject: afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation The AFS filesystem is currently triggering the silly-rename cleanup from afs_d_revalidate() when it sees that a dentry has been changed by a third party[1]. It should not be doing this as the cleanup includes deleting the silly-rename target file on iput. Fix this by removing the places in the d_revalidate handling that validate anything other than the directory and the dirent. It probably should not be looking to validate the target inode of the dentry also. This includes removing the point in afs_d_revalidate() where the inode that a dentry used to point to was marked as being deleted (AFS_VNODE_DELETED). We don't know it got deleted. It could have been renamed or it could have hard links remaining. This was reproduced by cloning a git repo onto an afs volume on one machine, switching to another machine and doing "git status", then switching back to the first and doing "git status". The second status would show weird output due to ".git/index" getting deleted by the above mentioned mechanism. A simpler way to do it is to do: machine 1: touch a machine 2: touch b; mv -f b a machine 1: stat a on an afs volume. The bug shows up as the stat failing with ENOENT and the file server log showing that machine 1 deleted "a". Fixes: 79ddbfa500b3 ("afs: Implement sillyrename for unlink and rename") Reported-by: Markus Suvanto Signed-off-by: David Howells Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c4 [1] Link: https://lore.kernel.org/r/163111668100.283156.3851669884664475428.stgit@warthog.procyon.org.uk/ --- fs/afs/dir.c | 46 +++++++--------------------------------------- 1 file changed, 7 insertions(+), 39 deletions(-) diff --git a/fs/afs/dir.c b/fs/afs/dir.c index a8e3ae55f1f9..4579bbda4634 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -1077,9 +1077,9 @@ static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry, */ static int afs_d_revalidate_rcu(struct dentry *dentry) { - struct afs_vnode *dvnode, *vnode; + struct afs_vnode *dvnode; struct dentry *parent; - struct inode *dir, *inode; + struct inode *dir; long dir_version, de_version; _enter("%p", dentry); @@ -1109,18 +1109,6 @@ static int afs_d_revalidate_rcu(struct dentry *dentry) return -ECHILD; } - /* Check to see if the vnode referred to by the dentry still - * has a callback. - */ - if (d_really_is_positive(dentry)) { - inode = d_inode_rcu(dentry); - if (inode) { - vnode = AFS_FS_I(inode); - if (!afs_check_validity(vnode)) - return -ECHILD; - } - } - return 1; /* Still valid */ } @@ -1156,17 +1144,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) if (IS_ERR(key)) key = NULL; - if (d_really_is_positive(dentry)) { - inode = d_inode(dentry); - if (inode) { - vnode = AFS_FS_I(inode); - afs_validate(vnode, key); - if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) - goto out_bad; - } - } - - /* lock down the parent dentry so we can peer at it */ + /* Hold the parent dentry so we can peer at it */ parent = dget_parent(dentry); dir = AFS_FS_I(d_inode(parent)); @@ -1175,7 +1153,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) if (test_bit(AFS_VNODE_DELETED, &dir->flags)) { _debug("%pd: parent dir deleted", dentry); - goto out_bad_parent; + goto not_found; } /* We only need to invalidate a dentry if the server's copy changed @@ -1201,12 +1179,12 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) case 0: /* the filename maps to something */ if (d_really_is_negative(dentry)) - goto out_bad_parent; + goto not_found; inode = d_inode(dentry); if (is_bad_inode(inode)) { printk("kAFS: afs_d_revalidate: %pd2 has bad inode\n", dentry); - goto out_bad_parent; + goto not_found; } vnode = AFS_FS_I(inode); @@ -1228,9 +1206,6 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) dentry, fid.unique, vnode->fid.unique, vnode->vfs_inode.i_generation); - write_seqlock(&vnode->cb_lock); - set_bit(AFS_VNODE_DELETED, &vnode->flags); - write_sequnlock(&vnode->cb_lock); goto not_found; } goto out_valid; @@ -1245,7 +1220,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) default: _debug("failed to iterate dir %pd: %d", parent, ret); - goto out_bad_parent; + goto not_found; } out_valid: @@ -1256,16 +1231,9 @@ out_valid_noupdate: _leave(" = 1 [valid]"); return 1; - /* the dirent, if it exists, now points to a different vnode */ not_found: - spin_lock(&dentry->d_lock); - dentry->d_flags |= DCACHE_NFSFS_RENAMED; - spin_unlock(&dentry->d_lock); - -out_bad_parent: _debug("dropping dentry %pd2", dentry); dput(parent); -out_bad: key_put(key); _leave(" = 0 [bad]"); -- cgit From 6e0e99d58a6530cf65f10e4bb16630c5be6c254d Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 2 Sep 2021 16:43:10 +0100 Subject: afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include #include #include #include #include #include int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ --- fs/afs/callback.c | 42 ++++++++++++++++++++++++++++++++-- fs/afs/cell.c | 2 ++ fs/afs/file.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++++++- fs/afs/internal.h | 8 +++++++ fs/afs/server.c | 2 ++ fs/afs/super.c | 1 + mm/memory.c | 1 + 7 files changed, 120 insertions(+), 3 deletions(-) diff --git a/fs/afs/callback.c b/fs/afs/callback.c index 7d9b23d981bf..1dd7543dbf9f 100644 --- a/fs/afs/callback.c +++ b/fs/afs/callback.c @@ -20,6 +20,37 @@ #include #include "internal.h" +/* + * Handle invalidation of an mmap'd file. We invalidate all the PTEs referring + * to the pages in this file's pagecache, forcing the kernel to go through + * ->fault() or ->page_mkwrite() - at which point we can handle invalidation + * more fully. + */ +void afs_invalidate_mmap_work(struct work_struct *work) +{ + struct afs_vnode *vnode = container_of(work, struct afs_vnode, cb_work); + + unmap_mapping_pages(vnode->vfs_inode.i_mapping, 0, 0, false); +} + +void afs_server_init_callback_work(struct work_struct *work) +{ + struct afs_server *server = container_of(work, struct afs_server, initcb_work); + struct afs_vnode *vnode; + struct afs_cell *cell = server->cell; + + down_read(&cell->fs_open_mmaps_lock); + + list_for_each_entry(vnode, &cell->fs_open_mmaps, cb_mmap_link) { + if (vnode->cb_server == server) { + clear_bit(AFS_VNODE_CB_PROMISED, &vnode->flags); + queue_work(system_unbound_wq, &vnode->cb_work); + } + } + + up_read(&cell->fs_open_mmaps_lock); +} + /* * Allow the fileserver to request callback state (re-)initialisation. * Unfortunately, UUIDs are not guaranteed unique. @@ -29,8 +60,10 @@ void afs_init_callback_state(struct afs_server *server) rcu_read_lock(); do { server->cb_s_break++; - server = rcu_dereference(server->uuid_next); - } while (0); + if (!list_empty(&server->cell->fs_open_mmaps)) + queue_work(system_unbound_wq, &server->initcb_work); + + } while ((server = rcu_dereference(server->uuid_next))); rcu_read_unlock(); } @@ -49,6 +82,11 @@ void __afs_break_callback(struct afs_vnode *vnode, enum afs_cb_break_reason reas if (vnode->lock_state == AFS_VNODE_LOCK_WAITING_FOR_CB) afs_lock_may_be_available(vnode); + if (reason != afs_cb_break_for_deleted && + vnode->status.type == AFS_FTYPE_FILE && + atomic_read(&vnode->cb_nr_mmap)) + queue_work(system_unbound_wq, &vnode->cb_work); + trace_afs_cb_break(&vnode->fid, vnode->cb_break, reason, true); } else { trace_afs_cb_break(&vnode->fid, vnode->cb_break, reason, false); diff --git a/fs/afs/cell.c b/fs/afs/cell.c index 887b673f6223..d88407fb9bc0 100644 --- a/fs/afs/cell.c +++ b/fs/afs/cell.c @@ -166,6 +166,8 @@ static struct afs_cell *afs_alloc_cell(struct afs_net *net, seqlock_init(&cell->volume_lock); cell->fs_servers = RB_ROOT; seqlock_init(&cell->fs_lock); + INIT_LIST_HEAD(&cell->fs_open_mmaps); + init_rwsem(&cell->fs_open_mmaps_lock); rwlock_init(&cell->vl_servers_lock); cell->flags = (1 << AFS_CELL_FL_CHECK_ALIAS); diff --git a/fs/afs/file.c b/fs/afs/file.c index 4c8d786b53e0..e6c447ae91f3 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -25,6 +25,9 @@ static int afs_releasepage(struct page *page, gfp_t gfp_flags); static void afs_readahead(struct readahead_control *ractl); static ssize_t afs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter); +static void afs_vm_open(struct vm_area_struct *area); +static void afs_vm_close(struct vm_area_struct *area); +static vm_fault_t afs_vm_map_pages(struct vm_fault *vmf, pgoff_t start_pgoff, pgoff_t end_pgoff); const struct file_operations afs_file_operations = { .open = afs_open, @@ -60,8 +63,10 @@ const struct address_space_operations afs_fs_aops = { }; static const struct vm_operations_struct afs_vm_ops = { + .open = afs_vm_open, + .close = afs_vm_close, .fault = filemap_fault, - .map_pages = filemap_map_pages, + .map_pages = afs_vm_map_pages, .page_mkwrite = afs_page_mkwrite, }; @@ -492,19 +497,79 @@ static int afs_releasepage(struct page *page, gfp_t gfp_flags) return 1; } +static void afs_add_open_mmap(struct afs_vnode *vnode) +{ + if (atomic_inc_return(&vnode->cb_nr_mmap) == 1) { + down_write(&vnode->volume->cell->fs_open_mmaps_lock); + + list_add_tail(&vnode->cb_mmap_link, + &vnode->volume->cell->fs_open_mmaps); + + up_write(&vnode->volume->cell->fs_open_mmaps_lock); + } +} + +static void afs_drop_open_mmap(struct afs_vnode *vnode) +{ + if (!atomic_dec_and_test(&vnode->cb_nr_mmap)) + return; + + down_write(&vnode->volume->cell->fs_open_mmaps_lock); + + if (atomic_read(&vnode->cb_nr_mmap) == 0) + list_del_init(&vnode->cb_mmap_link); + + up_write(&vnode->volume->cell->fs_open_mmaps_lock); + flush_work(&vnode->cb_work); +} + /* * Handle setting up a memory mapping on an AFS file. */ static int afs_file_mmap(struct file *file, struct vm_area_struct *vma) { + struct afs_vnode *vnode = AFS_FS_I(file_inode(file)); int ret; + afs_add_open_mmap(vnode); + ret = generic_file_mmap(file, vma); if (ret == 0) vma->vm_ops = &afs_vm_ops; + else + afs_drop_open_mmap(vnode); return ret; } +static void afs_vm_open(struct vm_area_struct *vma) +{ + afs_add_open_mmap(AFS_FS_I(file_inode(vma->vm_file))); +} + +static void afs_vm_close(struct vm_area_struct *vma) +{ + afs_drop_open_mmap(AFS_FS_I(file_inode(vma->vm_file))); +} + +static vm_fault_t afs_vm_map_pages(struct vm_fault *vmf, pgoff_t start_pgoff, pgoff_t end_pgoff) +{ + struct afs_vnode *vnode = AFS_FS_I(file_inode(vmf->vma->vm_file)); + struct afs_file *af = vmf->vma->vm_file->private_data; + + switch (afs_validate(vnode, af->key)) { + case 0: + return filemap_map_pages(vmf, start_pgoff, end_pgoff); + case -ENOMEM: + return VM_FAULT_OOM; + case -EINTR: + case -ERESTARTSYS: + return VM_FAULT_RETRY; + case -ESTALE: + default: + return VM_FAULT_SIGBUS; + } +} + static ssize_t afs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter) { struct afs_vnode *vnode = AFS_FS_I(file_inode(iocb->ki_filp)); diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 5ed416f4ff33..0deeb76c67d0 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -390,6 +390,8 @@ struct afs_cell { /* Active fileserver interaction state. */ struct rb_root fs_servers; /* afs_server (by server UUID) */ seqlock_t fs_lock; /* For fs_servers */ + struct rw_semaphore fs_open_mmaps_lock; + struct list_head fs_open_mmaps; /* List of vnodes that are mmapped */ /* VL server list. */ rwlock_t vl_servers_lock; /* Lock on vl_servers */ @@ -503,6 +505,7 @@ struct afs_server { struct hlist_node addr4_link; /* Link in net->fs_addresses4 */ struct hlist_node addr6_link; /* Link in net->fs_addresses6 */ struct hlist_node proc_link; /* Link in net->fs_proc */ + struct work_struct initcb_work; /* Work for CB.InitCallBackState* */ struct afs_server *gc_next; /* Next server in manager's list */ time64_t unuse_time; /* Time at which last unused */ unsigned long flags; @@ -657,7 +660,10 @@ struct afs_vnode { afs_lock_type_t lock_type : 8; /* outstanding callback notification on this file */ + struct work_struct cb_work; /* Work for mmap'd files */ + struct list_head cb_mmap_link; /* Link in cell->fs_open_mmaps */ void *cb_server; /* Server with callback/filelock */ + atomic_t cb_nr_mmap; /* Number of mmaps */ unsigned int cb_s_break; /* Mass break counter on ->server */ unsigned int cb_v_break; /* Mass break counter on ->volume */ unsigned int cb_break; /* Break counter on vnode */ @@ -965,6 +971,8 @@ extern struct fscache_cookie_def afs_vnode_cache_index_def; /* * callback.c */ +extern void afs_invalidate_mmap_work(struct work_struct *); +extern void afs_server_init_callback_work(struct work_struct *work); extern void afs_init_callback_state(struct afs_server *); extern void __afs_break_callback(struct afs_vnode *, enum afs_cb_break_reason); extern void afs_break_callback(struct afs_vnode *, enum afs_cb_break_reason); diff --git a/fs/afs/server.c b/fs/afs/server.c index 684a2b02b9ff..6e5b9a19b234 100644 --- a/fs/afs/server.c +++ b/fs/afs/server.c @@ -235,6 +235,7 @@ static struct afs_server *afs_alloc_server(struct afs_cell *cell, server->addr_version = alist->version; server->uuid = *uuid; rwlock_init(&server->fs_lock); + INIT_WORK(&server->initcb_work, afs_server_init_callback_work); init_waitqueue_head(&server->probe_wq); INIT_LIST_HEAD(&server->probe_link); spin_lock_init(&server->probe_lock); @@ -467,6 +468,7 @@ static void afs_destroy_server(struct afs_net *net, struct afs_server *server) if (test_bit(AFS_SERVER_FL_MAY_HAVE_CB, &server->flags)) afs_give_up_callbacks(net, server); + flush_work(&server->initcb_work); afs_put_server(net, server, afs_server_trace_destroy); } diff --git a/fs/afs/super.c b/fs/afs/super.c index e38bb1e7a4d2..d110def8aa8e 100644 --- a/fs/afs/super.c +++ b/fs/afs/super.c @@ -698,6 +698,7 @@ static struct inode *afs_alloc_inode(struct super_block *sb) vnode->lock_state = AFS_VNODE_LOCK_NONE; init_rwsem(&vnode->rmdir_lock); + INIT_WORK(&vnode->cb_work, afs_invalidate_mmap_work); _leave(" = %p", &vnode->vfs_inode); return &vnode->vfs_inode; diff --git a/mm/memory.c b/mm/memory.c index 25fc46e87214..adf9b9ef8277 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -3403,6 +3403,7 @@ void unmap_mapping_pages(struct address_space *mapping, pgoff_t start, unmap_mapping_range_tree(&mapping->i_mmap, &details); i_mmap_unlock_write(mapping); } +EXPORT_SYMBOL_GPL(unmap_mapping_pages); /** * unmap_mapping_range - unmap the portion of all mmaps in the specified -- cgit From 4fe6a946823a9bc8619fd16b7ea7d15914a30f22 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 2 Sep 2021 21:51:01 +0100 Subject: afs: Try to avoid taking RCU read lock when checking vnode validity Try to avoid taking the RCU read lock when checking the validity of a vnode's callback state. The only thing it's needed for is to pin the parent volume's server list whilst we search it to find the record of the server we're currently using to see if it has been reinitialised (ie. it sent us a CB.InitCallBackState* RPC). Do this by the following means: (1) Keep an additional per-cell counter (fs_s_break) that's incremented each time any of the fileservers in the cell reinitialises. Since the new counter can be accessed without RCU from the vnode, we can check that first - and only if it differs, get the RCU read lock and check the volume's server list. (2) Replace afs_get_s_break_rcu() with afs_check_server_good() which now indicates whether the callback promise is still expected to be present on the server. This does the checks as described in (1). (3) Restructure afs_check_validity() to take account of the change in (2). We can also get rid of the valid variable and just use the need_clear variable with the addition of the afs_cb_break_no_promise reason. (4) afs_check_validity() probably shouldn't be altering vnode->cb_v_break and vnode->cb_s_break when it doesn't have cb_lock exclusively locked. Move the change to vnode->cb_v_break to __afs_break_callback(). Delegate the change to vnode->cb_s_break to afs_select_fileserver() and set vnode->cb_fs_s_break there also. (5) afs_validate() no longer needs to get the RCU read lock around its call to afs_check_validity() - and can skip the call entirely if we don't have a promise. Signed-off-by: David Howells Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111669583.283156.1397603105683094563.stgit@warthog.procyon.org.uk/ --- fs/afs/callback.c | 2 ++ fs/afs/inode.c | 88 ++++++++++++++++++++++------------------------ fs/afs/internal.h | 2 ++ fs/afs/rotate.c | 1 + include/trace/events/afs.h | 8 +++-- 5 files changed, 54 insertions(+), 47 deletions(-) diff --git a/fs/afs/callback.c b/fs/afs/callback.c index 1dd7543dbf9f..1b4d5809808d 100644 --- a/fs/afs/callback.c +++ b/fs/afs/callback.c @@ -60,6 +60,7 @@ void afs_init_callback_state(struct afs_server *server) rcu_read_lock(); do { server->cb_s_break++; + atomic_inc(&server->cell->fs_s_break); if (!list_empty(&server->cell->fs_open_mmaps)) queue_work(system_unbound_wq, &server->initcb_work); @@ -77,6 +78,7 @@ void __afs_break_callback(struct afs_vnode *vnode, enum afs_cb_break_reason reas clear_bit(AFS_VNODE_NEW_CONTENT, &vnode->flags); if (test_and_clear_bit(AFS_VNODE_CB_PROMISED, &vnode->flags)) { vnode->cb_break++; + vnode->cb_v_break = vnode->volume->cb_v_break; afs_clear_permits(vnode); if (vnode->lock_state == AFS_VNODE_LOCK_WAITING_FOR_CB) diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 80b6c8d967d5..126daf9969db 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -587,22 +587,32 @@ static void afs_zap_data(struct afs_vnode *vnode) } /* - * Get the server reinit counter for a vnode's current server. + * Check to see if we have a server currently serving this volume and that it + * hasn't been reinitialised or dropped from the list. */ -static bool afs_get_s_break_rcu(struct afs_vnode *vnode, unsigned int *_s_break) +static bool afs_check_server_good(struct afs_vnode *vnode) { - struct afs_server_list *slist = rcu_dereference(vnode->volume->servers); + struct afs_server_list *slist; struct afs_server *server; + bool good; int i; + if (vnode->cb_fs_s_break == atomic_read(&vnode->volume->cell->fs_s_break)) + return true; + + rcu_read_lock(); + + slist = rcu_dereference(vnode->volume->servers); for (i = 0; i < slist->nr_servers; i++) { server = slist->servers[i].server; if (server == vnode->cb_server) { - *_s_break = READ_ONCE(server->cb_s_break); - return true; + good = (vnode->cb_s_break == server->cb_s_break); + rcu_read_unlock(); + return good; } } + rcu_read_unlock(); return false; } @@ -611,57 +621,46 @@ static bool afs_get_s_break_rcu(struct afs_vnode *vnode, unsigned int *_s_break) */ bool afs_check_validity(struct afs_vnode *vnode) { - struct afs_volume *volume = vnode->volume; enum afs_cb_break_reason need_clear = afs_cb_break_no_break; time64_t now = ktime_get_real_seconds(); - bool valid; - unsigned int cb_break, cb_s_break, cb_v_break; + unsigned int cb_break; int seq = 0; do { read_seqbegin_or_lock(&vnode->cb_lock, &seq); - cb_v_break = READ_ONCE(volume->cb_v_break); cb_break = vnode->cb_break; - if (test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags) && - afs_get_s_break_rcu(vnode, &cb_s_break)) { - if (vnode->cb_s_break != cb_s_break || - vnode->cb_v_break != cb_v_break) { - vnode->cb_s_break = cb_s_break; - vnode->cb_v_break = cb_v_break; - need_clear = afs_cb_break_for_vsbreak; - valid = false; - } else if (test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags)) { + if (test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags)) { + if (vnode->cb_v_break != vnode->volume->cb_v_break) + need_clear = afs_cb_break_for_v_break; + else if (!afs_check_server_good(vnode)) + need_clear = afs_cb_break_for_s_reinit; + else if (test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags)) need_clear = afs_cb_break_for_zap; - valid = false; - } else if (vnode->cb_expires_at - 10 <= now) { + else if (vnode->cb_expires_at - 10 <= now) need_clear = afs_cb_break_for_lapsed; - valid = false; - } else { - valid = true; - } } else if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) { - valid = true; + ; } else { - vnode->cb_v_break = cb_v_break; - valid = false; + need_clear = afs_cb_break_no_promise; } } while (need_seqretry(&vnode->cb_lock, seq)); done_seqretry(&vnode->cb_lock, seq); - if (need_clear != afs_cb_break_no_break) { - write_seqlock(&vnode->cb_lock); - if (cb_break == vnode->cb_break) - __afs_break_callback(vnode, need_clear); - else - trace_afs_cb_miss(&vnode->fid, need_clear); - write_sequnlock(&vnode->cb_lock); - valid = false; - } + if (need_clear == afs_cb_break_no_break) + return true; - return valid; + write_seqlock(&vnode->cb_lock); + if (need_clear == afs_cb_break_no_promise) + vnode->cb_v_break = vnode->volume->cb_v_break; + else if (cb_break == vnode->cb_break) + __afs_break_callback(vnode, need_clear); + else + trace_afs_cb_miss(&vnode->fid, need_clear); + write_sequnlock(&vnode->cb_lock); + return false; } /* @@ -675,21 +674,20 @@ bool afs_check_validity(struct afs_vnode *vnode) */ int afs_validate(struct afs_vnode *vnode, struct key *key) { - bool valid; int ret; _enter("{v={%llx:%llu} fl=%lx},%x", vnode->fid.vid, vnode->fid.vnode, vnode->flags, key_serial(key)); - rcu_read_lock(); - valid = afs_check_validity(vnode); - rcu_read_unlock(); - - if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) - clear_nlink(&vnode->vfs_inode); + if (unlikely(test_bit(AFS_VNODE_DELETED, &vnode->flags))) { + if (vnode->vfs_inode.i_nlink) + clear_nlink(&vnode->vfs_inode); + goto valid; + } - if (valid) + if (test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags) && + afs_check_validity(vnode)) goto valid; down_write(&vnode->validate_lock); diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 0deeb76c67d0..c97618855b46 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -392,6 +392,7 @@ struct afs_cell { seqlock_t fs_lock; /* For fs_servers */ struct rw_semaphore fs_open_mmaps_lock; struct list_head fs_open_mmaps; /* List of vnodes that are mmapped */ + atomic_t fs_s_break; /* Counter of CB.InitCallBackState messages */ /* VL server list. */ rwlock_t vl_servers_lock; /* Lock on vl_servers */ @@ -664,6 +665,7 @@ struct afs_vnode { struct list_head cb_mmap_link; /* Link in cell->fs_open_mmaps */ void *cb_server; /* Server with callback/filelock */ atomic_t cb_nr_mmap; /* Number of mmaps */ + unsigned int cb_fs_s_break; /* Mass server break counter (cell->fs_s_break) */ unsigned int cb_s_break; /* Mass break counter on ->server */ unsigned int cb_v_break; /* Mass break counter on ->volume */ unsigned int cb_break; /* Break counter on vnode */ diff --git a/fs/afs/rotate.c b/fs/afs/rotate.c index d83f13c44b92..79e1a5f6701b 100644 --- a/fs/afs/rotate.c +++ b/fs/afs/rotate.c @@ -374,6 +374,7 @@ selected_server: if (vnode->cb_server != server) { vnode->cb_server = server; vnode->cb_s_break = server->cb_s_break; + vnode->cb_fs_s_break = atomic_read(&server->cell->fs_s_break); vnode->cb_v_break = vnode->volume->cb_v_break; clear_bit(AFS_VNODE_CB_PROMISED, &vnode->flags); } diff --git a/include/trace/events/afs.h b/include/trace/events/afs.h index 9f73ed2cf061..bca73e8c8cde 100644 --- a/include/trace/events/afs.h +++ b/include/trace/events/afs.h @@ -306,11 +306,13 @@ enum afs_flock_operation { enum afs_cb_break_reason { afs_cb_break_no_break, + afs_cb_break_no_promise, afs_cb_break_for_callback, afs_cb_break_for_deleted, afs_cb_break_for_lapsed, + afs_cb_break_for_s_reinit, afs_cb_break_for_unlink, - afs_cb_break_for_vsbreak, + afs_cb_break_for_v_break, afs_cb_break_for_volume_callback, afs_cb_break_for_zap, }; @@ -602,11 +604,13 @@ enum afs_cb_break_reason { #define afs_cb_break_reasons \ EM(afs_cb_break_no_break, "no-break") \ + EM(afs_cb_break_no_promise, "no-promise") \ EM(afs_cb_break_for_callback, "break-cb") \ EM(afs_cb_break_for_deleted, "break-del") \ EM(afs_cb_break_for_lapsed, "break-lapsed") \ + EM(afs_cb_break_for_s_reinit, "s-reinit") \ EM(afs_cb_break_for_unlink, "break-unlink") \ - EM(afs_cb_break_for_vsbreak, "break-vs") \ + EM(afs_cb_break_for_v_break, "break-v") \ EM(afs_cb_break_for_volume_callback, "break-v-cb") \ E_(afs_cb_break_for_zap, "break-zap") -- cgit From b537a3c21775075395af475dcc6ef212fcf29db8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 10 Sep 2021 00:01:52 +0100 Subject: afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and Linux's afs client switches between them when talking to a non-YFS server if the read size, the file position or the sum of the two have the upper 32 bits set of the 64-bit value. This is a problem, however, since the file position and length fields of FS.FetchData are *signed* 32-bit values. Fix this by capturing the capability bits obtained from the fileserver when it's sent an FS.GetCapabilities RPC, rather than just discarding them, and then picking out the VICED_CAPABILITY_64BITFILES flag. This can then be used to decide whether to use FS.FetchData or FS.FetchData64 - and also FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to switch on the parameter values. This capabilities flag could also be used to limit the maximum size of the file, but all servers must be checked for that. Note that the issue does not exist with FS.StoreData - that uses *unsigned* 32-bit values. It's also not a problem with Auristor servers as its YFS.FetchData64 op uses unsigned 64-bit values. This can be tested by cloning a git repo through an OpenAFS client to an OpenAFS server and then doing "git status" on it from a Linux afs client[1]. Provided the clone has a pack file that's in the 2G-4G range, the git status will show errors like: error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index This can be observed in the server's FileLog with something like the following appearing: Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001 Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866 ... Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5 Note the file position of 18446744071815340032. This is the requested file position sign-extended. Fixes: b9b1f8d5930a ("AFS: write support fixes") Reported-by: Markus Suvanto Signed-off-by: David Howells Reviewed-by: Marc Dionne Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org cc: openafs-devel@openafs.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c9 [1] Link: https://lore.kernel.org/r/951332.1631308745@warthog.procyon.org.uk/ --- fs/afs/fs_probe.c | 8 +++++++- fs/afs/fsclient.c | 31 ++++++++++++++++++++----------- fs/afs/internal.h | 1 + fs/afs/protocol_afs.h | 15 +++++++++++++++ fs/afs/protocol_yfs.h | 6 ++++++ 5 files changed, 49 insertions(+), 12 deletions(-) create mode 100644 fs/afs/protocol_afs.h diff --git a/fs/afs/fs_probe.c b/fs/afs/fs_probe.c index e7e98ad63a91..c0031a3ab42f 100644 --- a/fs/afs/fs_probe.c +++ b/fs/afs/fs_probe.c @@ -9,6 +9,7 @@ #include #include "afs_fs.h" #include "internal.h" +#include "protocol_afs.h" #include "protocol_yfs.h" static unsigned int afs_fs_probe_fast_poll_interval = 30 * HZ; @@ -102,7 +103,7 @@ void afs_fileserver_probe_result(struct afs_call *call) struct afs_addr_list *alist = call->alist; struct afs_server *server = call->server; unsigned int index = call->addr_ix; - unsigned int rtt_us = 0; + unsigned int rtt_us = 0, cap0; int ret = call->error; _enter("%pU,%u", &server->uuid, index); @@ -159,6 +160,11 @@ responded: clear_bit(AFS_SERVER_FL_IS_YFS, &server->flags); alist->addrs[index].srx_service = call->service_id; } + cap0 = ntohl(call->tmp); + if (cap0 & AFS3_VICED_CAPABILITY_64BITFILES) + set_bit(AFS_SERVER_FL_HAS_FS64, &server->flags); + else + clear_bit(AFS_SERVER_FL_HAS_FS64, &server->flags); } if (rxrpc_kernel_get_srtt(call->net->socket, call->rxcall, &rtt_us) && diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c index dd3f45d906d2..4943413d9c5f 100644 --- a/fs/afs/fsclient.c +++ b/fs/afs/fsclient.c @@ -456,9 +456,7 @@ void afs_fs_fetch_data(struct afs_operation *op) struct afs_read *req = op->fetch.req; __be32 *bp; - if (upper_32_bits(req->pos) || - upper_32_bits(req->len) || - upper_32_bits(req->pos + req->len)) + if (test_bit(AFS_SERVER_FL_HAS_FS64, &op->server->flags)) return afs_fs_fetch_data64(op); _enter(""); @@ -1113,9 +1111,7 @@ void afs_fs_store_data(struct afs_operation *op) (unsigned long long)op->store.pos, (unsigned long long)op->store.i_size); - if (upper_32_bits(op->store.pos) || - upper_32_bits(op->store.size) || - upper_32_bits(op->store.i_size)) + if (test_bit(AFS_SERVER_FL_HAS_FS64, &op->server->flags)) return afs_fs_store_data64(op); call = afs_alloc_flat_call(op->net, &afs_RXFSStoreData, @@ -1229,7 +1225,7 @@ static void afs_fs_setattr_size(struct afs_operation *op) key_serial(op->key), vp->fid.vid, vp->fid.vnode); ASSERT(attr->ia_valid & ATTR_SIZE); - if (upper_32_bits(attr->ia_size)) + if (test_bit(AFS_SERVER_FL_HAS_FS64, &op->server->flags)) return afs_fs_setattr_size64(op); call = afs_alloc_flat_call(op->net, &afs_RXFSStoreData_as_Status, @@ -1657,20 +1653,33 @@ static int afs_deliver_fs_get_capabilities(struct afs_call *call) return ret; count = ntohl(call->tmp); - call->count = count; call->count2 = count; - afs_extract_discard(call, count * sizeof(__be32)); + if (count == 0) { + call->unmarshall = 4; + call->tmp = 0; + break; + } + + /* Extract the first word of the capabilities to call->tmp */ + afs_extract_to_tmp(call); call->unmarshall++; fallthrough; - /* Extract capabilities words */ case 2: ret = afs_extract_data(call, false); if (ret < 0) return ret; - /* TODO: Examine capabilities */ + afs_extract_discard(call, (count - 1) * sizeof(__be32)); + call->unmarshall++; + fallthrough; + + /* Extract remaining capabilities words */ + case 3: + ret = afs_extract_data(call, false); + if (ret < 0) + return ret; call->unmarshall++; break; diff --git a/fs/afs/internal.h b/fs/afs/internal.h index c97618855b46..b0fe27ae60db 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -520,6 +520,7 @@ struct afs_server { #define AFS_SERVER_FL_IS_YFS 16 /* Server is YFS not AFS */ #define AFS_SERVER_FL_NO_IBULK 17 /* Fileserver doesn't support FS.InlineBulkStatus */ #define AFS_SERVER_FL_NO_RM2 18 /* Fileserver doesn't support YFS.RemoveFile2 */ +#define AFS_SERVER_FL_HAS_FS64 19 /* Fileserver supports FS.{Fetch,Store}Data64 */ atomic_t ref; /* Object refcount */ atomic_t active; /* Active user count */ u32 addr_version; /* Address list version */ diff --git a/fs/afs/protocol_afs.h b/fs/afs/protocol_afs.h new file mode 100644 index 000000000000..0c39358c8b70 --- /dev/null +++ b/fs/afs/protocol_afs.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* AFS protocol bits + * + * Copyright (C) 2021 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + */ + + +#define AFSCAPABILITIESMAX 196 /* Maximum number of words in a capability set */ + +/* AFS3 Fileserver capabilities word 0 */ +#define AFS3_VICED_CAPABILITY_ERRORTRANS 0x0001 /* Uses UAE errors */ +#define AFS3_VICED_CAPABILITY_64BITFILES 0x0002 /* FetchData64 & StoreData64 supported */ +#define AFS3_VICED_CAPABILITY_WRITELOCKACL 0x0004 /* Can lock a file even without lock perm */ +#define AFS3_VICED_CAPABILITY_SANEACLS 0x0008 /* ACLs reviewed for sanity - don't use */ diff --git a/fs/afs/protocol_yfs.h b/fs/afs/protocol_yfs.h index b5bd03b1d3c7..e4cd89c44c46 100644 --- a/fs/afs/protocol_yfs.h +++ b/fs/afs/protocol_yfs.h @@ -168,3 +168,9 @@ enum yfs_lock_type { yfs_LockMandatoryWrite = 0x101, yfs_LockMandatoryExtend = 0x102, }; + +/* RXYFS Viced Capability Flags */ +#define YFS_VICED_CAPABILITY_ERRORTRANS 0x0001 /* Deprecated v0.195 */ +#define YFS_VICED_CAPABILITY_64BITFILES 0x0002 /* Deprecated v0.195 */ +#define YFS_VICED_CAPABILITY_WRITELOCKACL 0x0004 /* Can lock a file even without lock perm */ +#define YFS_VICED_CAPABILITY_SANEACLS 0x0008 /* Deprecated v0.195 */ -- cgit From 9d37e1cab2a9d2cee2737973fa455e6f89eee46a Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 8 Sep 2021 21:55:19 +0100 Subject: afs: Fix updating of i_blocks on file/dir extension When an afs file or directory is modified locally such that the total file size is extended, i_blocks needs to be recalculated too. Fix this by making afs_write_end() and afs_edit_dir_add() call afs_set_i_size() rather than setting inode->i_size directly as that also recalculates inode->i_blocks. This can be tested by creating and writing into directories and files and then examining them with du. Without this change, directories show a 4 blocks (they start out at 2048 bytes) and files show 0 blocks; with this change, they should show a number of blocks proportional to the file size rounded up to 1024. Fixes: 31143d5d515e ("AFS: implement basic file write support") Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...") Reported-by: Markus Suvanto Signed-off-by: David Howells Reviewed-by: Marc Dionne Tested-by: Markus Suvanto cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163113612442.352844.11162345591911691150.stgit@warthog.procyon.org.uk/ --- fs/afs/dir_edit.c | 4 ++-- fs/afs/inode.c | 10 ---------- fs/afs/internal.h | 10 ++++++++++ fs/afs/write.c | 2 +- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/afs/dir_edit.c b/fs/afs/dir_edit.c index f4600c1353ad..540b9fc96824 100644 --- a/fs/afs/dir_edit.c +++ b/fs/afs/dir_edit.c @@ -263,7 +263,7 @@ void afs_edit_dir_add(struct afs_vnode *vnode, if (b == nr_blocks) { _debug("init %u", b); afs_edit_init_block(meta, block, b); - i_size_write(&vnode->vfs_inode, (b + 1) * AFS_DIR_BLOCK_SIZE); + afs_set_i_size(vnode, (b + 1) * AFS_DIR_BLOCK_SIZE); } /* Only lower dir pages have a counter in the header. */ @@ -296,7 +296,7 @@ void afs_edit_dir_add(struct afs_vnode *vnode, new_directory: afs_edit_init_block(meta, meta, 0); i_size = AFS_DIR_BLOCK_SIZE; - i_size_write(&vnode->vfs_inode, i_size); + afs_set_i_size(vnode, i_size); slot = AFS_DIR_RESV_BLOCKS0; page = page0; block = meta; diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 126daf9969db..8fcffea2daf5 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -53,16 +53,6 @@ static noinline void dump_vnode(struct afs_vnode *vnode, struct afs_vnode *paren dump_stack(); } -/* - * Set the file size and block count. Estimate the number of 512 bytes blocks - * used, rounded up to nearest 1K for consistency with other AFS clients. - */ -static void afs_set_i_size(struct afs_vnode *vnode, u64 size) -{ - i_size_write(&vnode->vfs_inode, size); - vnode->vfs_inode.i_blocks = ((size + 1023) >> 10) << 1; -} - /* * Initialise an inode from the vnode status. */ diff --git a/fs/afs/internal.h b/fs/afs/internal.h index b0fe27ae60db..0ad97a8fc0d4 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -1596,6 +1596,16 @@ static inline void afs_update_dentry_version(struct afs_operation *op, (void *)(unsigned long)dir_vp->scb.status.data_version; } +/* + * Set the file size and block count. Estimate the number of 512 bytes blocks + * used, rounded up to nearest 1K for consistency with other AFS clients. + */ +static inline void afs_set_i_size(struct afs_vnode *vnode, u64 size) +{ + i_size_write(&vnode->vfs_inode, size); + vnode->vfs_inode.i_blocks = ((size + 1023) >> 10) << 1; +} + /* * Check for a conflicting operation on a directory that we just unlinked from. * If someone managed to sneak a link or an unlink in on the file we just diff --git a/fs/afs/write.c b/fs/afs/write.c index 32a764c24284..2dfe3b3a53d6 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -137,7 +137,7 @@ int afs_write_end(struct file *file, struct address_space *mapping, write_seqlock(&vnode->cb_lock); i_size = i_size_read(&vnode->vfs_inode); if (maybe_i_size > i_size) - i_size_write(&vnode->vfs_inode, maybe_i_size); + afs_set_i_size(vnode, maybe_i_size); write_sequnlock(&vnode->cb_lock); } -- cgit From 7bb057134d609b9c038a00b6876cf0d37d0118ce Mon Sep 17 00:00:00 2001 From: Carlo Lobrano Date: Fri, 3 Sep 2021 14:39:13 +0200 Subject: USB: serial: option: add Telit LN920 compositions This patch adds the following Telit LN920 compositions: 0x1060: tty, adb, rmnet, tty, tty, tty, tty 0x1061: tty, adb, mbim, tty, tty, tty, tty 0x1062: rndis, tty, adb, tty, tty, tty, tty 0x1063: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Carlo Lobrano Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com Reviewed-by: Daniele Palmas Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 29c765cc8495..a79f51e35115 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1205,6 +1205,14 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff), /* Telit FD980 */ .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff), /* Telit LN920 (rmnet) */ + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff), /* Telit LN920 (MBIM) */ + .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1062, 0xff), /* Telit LN920 (RNDIS) */ + .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff), /* Telit LN920 (ECM) */ + .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), -- cgit From 349bff48ae0f5f8aa2075d0bdc2091a30bd634f6 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 27 Aug 2021 17:53:10 +0300 Subject: platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR() ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused which is not what we want. Instead of adding ifdeffery here and there, drop ACPI_PTR() and unused acpi.h. Fixes: fdca4f16f57d ("platform:x86: add Intel P-Unit mailbox IPC driver") Reported-by: kernel test robot Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210827145310.76239-1-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/intel/punit_ipc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/platform/x86/intel/punit_ipc.c b/drivers/platform/x86/intel/punit_ipc.c index f58b8543f6ac..66bb39fd0ef9 100644 --- a/drivers/platform/x86/intel/punit_ipc.c +++ b/drivers/platform/x86/intel/punit_ipc.c @@ -8,7 +8,6 @@ * which provide mailbox interface for power management usage. */ -#include #include #include #include @@ -319,7 +318,7 @@ static struct platform_driver intel_punit_ipc_driver = { .remove = intel_punit_ipc_remove, .driver = { .name = "intel_punit_ipc", - .acpi_match_table = ACPI_PTR(punit_ipc_acpi_ids), + .acpi_match_table = punit_ipc_acpi_ids, }, }; -- cgit From 4c4a3d7cffb42da21ea8891fc7e6808ae05dbcb5 Mon Sep 17 00:00:00 2001 From: Matan Ziv-Av Date: Sun, 29 Aug 2021 15:07:08 +0300 Subject: lg-laptop: Correctly handle dmi_get_system_info() returning NULL The laptop model is identified by parsing the product name. If no product name is available, do not try to parse it. Default model is 2017. Signed-off-by: Matan Ziv-Av Link: https://lore.kernel.org/r/93ff3bb-503b-f73-bf18-87bae1699ed@svgalib.org Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/lg-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/lg-laptop.c b/drivers/platform/x86/lg-laptop.c index 3e520d5bca07..88b551caeaaf 100644 --- a/drivers/platform/x86/lg-laptop.c +++ b/drivers/platform/x86/lg-laptop.c @@ -655,7 +655,7 @@ static int acpi_add(struct acpi_device *device) goto out_platform_registered; } product = dmi_get_system_info(DMI_PRODUCT_NAME); - if (strlen(product) > 4) + if (product && strlen(product) > 4) switch (product[4]) { case '5': case '6': -- cgit From 3bf1669b0e033c885ebcb1ddc2334088dd125f2d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 5 Sep 2021 15:02:09 +0200 Subject: platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet Add touchscreen info for the Chuwi HiBook (CWI514) tablet. This includes info for getting the firmware directly from the UEFI, so that the user does not need to manually install the firmware in /lib/firmware/silead. This change will make the touchscreen on these devices work OOTB, without requiring any manual setup. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210905130210.32810-1-hdegoede@redhat.com --- drivers/platform/x86/touchscreen_dmi.c | 37 ++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 0e1451b1d9c6..1f9cb756b103 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -141,6 +141,33 @@ static const struct ts_dmi_data chuwi_hi10_pro_data = { .properties = chuwi_hi10_pro_props, }; +static const struct property_entry chuwi_hibook_props[] = { + PROPERTY_ENTRY_U32("touchscreen-min-x", 30), + PROPERTY_ENTRY_U32("touchscreen-min-y", 4), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1892), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1276), + PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), + PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hibook.fw"), + PROPERTY_ENTRY_U32("silead,max-fingers", 10), + PROPERTY_ENTRY_BOOL("silead,home-button"), + { } +}; + +static const struct ts_dmi_data chuwi_hibook_data = { + .embedded_fw = { + .name = "silead/gsl1680-chuwi-hibook.fw", + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 }, + .length = 40392, + .sha256 = { 0xf7, 0xc0, 0xe8, 0x5a, 0x6c, 0xf2, 0xeb, 0x8d, + 0x12, 0xc4, 0x45, 0xbf, 0x55, 0x13, 0x4c, 0x1a, + 0x13, 0x04, 0x31, 0x08, 0x65, 0x73, 0xf7, 0xa8, + 0x1b, 0x7d, 0x59, 0xc9, 0xe6, 0x97, 0xf7, 0x38 }, + }, + .acpi_name = "MSSL0017:00", + .properties = chuwi_hibook_props, +}; + static const struct property_entry chuwi_vi8_props[] = { PROPERTY_ENTRY_U32("touchscreen-min-x", 4), PROPERTY_ENTRY_U32("touchscreen-min-y", 6), @@ -979,6 +1006,16 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), }, }, + { + /* Chuwi HiBook (CWI514) */ + .driver_data = (void *)&chuwi_hibook_data, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), + DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), + /* Above matches are too generic, add bios-date match */ + DMI_MATCH(DMI_BIOS_DATE, "05/07/2016"), + }, + }, { /* Chuwi Vi8 (CWI506) */ .driver_data = (void *)&chuwi_vi8_data, -- cgit From 196159d278ae3b49e7bbb7c76822e6008fd89b97 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 5 Sep 2021 15:02:10 +0200 Subject: platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet Add info for getting the firmware directly from the UEFI for the Chuwi Hi10 Plus (CWI527), so that the user does not need to manually install the firmware in /lib/firmware/silead. This change will make the touchscreen on these devices work OOTB, without requiring any manual setup. Also tweak the min and width/height values a bit for more accurate position reporting. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210905130210.32810-2-hdegoede@redhat.com --- drivers/platform/x86/touchscreen_dmi.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 1f9cb756b103..033f797861d8 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -100,10 +100,10 @@ static const struct ts_dmi_data chuwi_hi10_air_data = { }; static const struct property_entry chuwi_hi10_plus_props[] = { - PROPERTY_ENTRY_U32("touchscreen-min-x", 0), - PROPERTY_ENTRY_U32("touchscreen-min-y", 5), - PROPERTY_ENTRY_U32("touchscreen-size-x", 1914), - PROPERTY_ENTRY_U32("touchscreen-size-y", 1283), + PROPERTY_ENTRY_U32("touchscreen-min-x", 12), + PROPERTY_ENTRY_U32("touchscreen-min-y", 10), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1908), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1270), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10plus.fw"), PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), @@ -111,6 +111,15 @@ static const struct property_entry chuwi_hi10_plus_props[] = { }; static const struct ts_dmi_data chuwi_hi10_plus_data = { + .embedded_fw = { + .name = "silead/gsl1680-chuwi-hi10plus.fw", + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 }, + .length = 34056, + .sha256 = { 0xfd, 0x0a, 0x08, 0x08, 0x3c, 0xa6, 0x34, 0x4e, + 0x2c, 0x49, 0x9c, 0xcd, 0x7d, 0x44, 0x9d, 0x38, + 0x10, 0x68, 0xb5, 0xbd, 0xb7, 0x2a, 0x63, 0xb5, + 0x67, 0x0b, 0x96, 0xbd, 0x89, 0x67, 0x85, 0x09 }, + }, .acpi_name = "MSSL0017:00", .properties = chuwi_hi10_plus_props, }; -- cgit From a06c2e5c048e5e07fac9daf3073bd0b6582913c7 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Sep 2021 15:49:55 +0300 Subject: interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfg The id of slv_cnoc_mnoc_cfg node is mistakenly coded as id of slv_blsp_1. It causes the following warning on slv_blsp_1 node adding. Correct the id of slv_cnoc_mnoc_cfg node. [ 1.948180] ------------[ cut here ]------------ [ 1.954122] WARNING: CPU: 2 PID: 7 at drivers/interconnect/core.c:962 icc_node_add+0xe4/0xf8 [ 1.958994] Modules linked in: [ 1.967399] CPU: 2 PID: 7 Comm: kworker/u16:0 Not tainted 5.14.0-rc6-next-20210818 #21 [ 1.970275] Hardware name: Xiaomi Redmi Note 7 (DT) [ 1.978169] Workqueue: events_unbound deferred_probe_work_func [ 1.982945] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.988849] pc : icc_node_add+0xe4/0xf8 [ 1.995699] lr : qnoc_probe+0x350/0x438 [ 1.999519] sp : ffff80001008bb10 [ 2.003337] x29: ffff80001008bb10 x28: 000000000000001a x27: ffffb83ddc61ee28 [ 2.006818] x26: ffff2fe341d44080 x25: ffff2fe340f3aa80 x24: ffffb83ddc98f0e8 [ 2.013938] x23: 0000000000000024 x22: ffff2fe3408b7400 x21: 0000000000000000 [ 2.021054] x20: ffff2fe3408b7410 x19: ffff2fe341d44080 x18: 0000000000000010 [ 2.028173] x17: ffff2fe3bdd0aac0 x16: 0000000000000281 x15: ffff2fe3400f5528 [ 2.035290] x14: 000000000000013f x13: ffff2fe3400f5528 x12: 00000000ffffffea [ 2.042410] x11: ffffb83ddc9109d0 x10: ffffb83ddc8f8990 x9 : ffffb83ddc8f89e8 [ 2.049527] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 [ 2.056645] x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : ffffb83ddc9903b0 [ 2.063764] x2 : 1a1f6fde34d45500 x1 : ffff2fe340f3a880 x0 : ffff2fe340f3a880 [ 2.070882] Call trace: [ 2.077989] icc_node_add+0xe4/0xf8 [ 2.080247] qnoc_probe+0x350/0x438 [ 2.083718] platform_probe+0x68/0xd8 [ 2.087191] really_probe+0xb8/0x300 [ 2.091011] __driver_probe_device+0x78/0xe0 [ 2.094659] driver_probe_device+0x80/0x110 [ 2.098911] __device_attach_driver+0x90/0xe0 [ 2.102818] bus_for_each_drv+0x78/0xc8 [ 2.107331] __device_attach+0xf0/0x150 [ 2.110977] device_initial_probe+0x14/0x20 [ 2.114796] bus_probe_device+0x9c/0xa8 [ 2.118963] deferred_probe_work_func+0x88/0xc0 [ 2.122784] process_one_work+0x1a4/0x338 [ 2.127296] worker_thread+0x1f8/0x420 [ 2.131464] kthread+0x150/0x160 [ 2.135107] ret_from_fork+0x10/0x20 [ 2.138495] ---[ end trace 5eea8768cb620e87 ]--- Signed-off-by: Shawn Guo Reviewed-by: Bjorn Andersson Fixes: f80a1d414328 ("interconnect: qcom: Add SDM660 interconnect provider driver") Link: https://lore.kernel.org/r/20210823014003.31391-1-shawn.guo@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sdm660.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/interconnect/qcom/sdm660.c b/drivers/interconnect/qcom/sdm660.c index 632dbdd21915..ac13046537e8 100644 --- a/drivers/interconnect/qcom/sdm660.c +++ b/drivers/interconnect/qcom/sdm660.c @@ -307,7 +307,7 @@ DEFINE_QNODE(slv_bimc_cfg, SDM660_SLAVE_BIMC_CFG, 4, -1, 56, true, -1, 0, -1, 0) DEFINE_QNODE(slv_prng, SDM660_SLAVE_PRNG, 4, -1, 44, true, -1, 0, -1, 0); DEFINE_QNODE(slv_spdm, SDM660_SLAVE_SPDM, 4, -1, 60, true, -1, 0, -1, 0); DEFINE_QNODE(slv_qdss_cfg, SDM660_SLAVE_QDSS_CFG, 4, -1, 63, true, -1, 0, -1, 0); -DEFINE_QNODE(slv_cnoc_mnoc_cfg, SDM660_SLAVE_BLSP_1, 4, -1, 66, true, -1, 0, -1, SDM660_MASTER_CNOC_MNOC_CFG); +DEFINE_QNODE(slv_cnoc_mnoc_cfg, SDM660_SLAVE_CNOC_MNOC_CFG, 4, -1, 66, true, -1, 0, -1, SDM660_MASTER_CNOC_MNOC_CFG); DEFINE_QNODE(slv_snoc_cfg, SDM660_SLAVE_SNOC_CFG, 4, -1, 70, true, -1, 0, -1, 0); DEFINE_QNODE(slv_qm_cfg, SDM660_SLAVE_QM_CFG, 4, -1, 212, true, -1, 0, -1, 0); DEFINE_QNODE(slv_clk_ctl, SDM660_SLAVE_CLK_CTL, 4, -1, 47, true, -1, 0, -1, 0); -- cgit From 5833c9b8766298e73c11766f9585d4ea4fa785ff Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Sep 2021 15:49:55 +0300 Subject: interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and mask The NOC_QOS_PRIORITY shift and mask do not match what vendor kernel defines [1]. Correct them per vendor kernel. As the result of NOC_QOS_PRIORITY_P0_SHIFT being 0, the definition can be dropped and regmap_update_bits() call on P0 can be simplified a bit. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/drivers/soc/qcom/msm_bus/msm_bus_noc_adhoc.c?h=LA.UM.8.2.r1-04800-sdm660.0#n37 Fixes: f80a1d414328 ("interconnect: qcom: Add SDM660 interconnect provider driver") Signed-off-by: Shawn Guo Reviewed-by: Dmitry Baryshkov Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20210902054915.28689-1-shawn.guo@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sdm660.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/interconnect/qcom/sdm660.c b/drivers/interconnect/qcom/sdm660.c index ac13046537e8..99eef7e2d326 100644 --- a/drivers/interconnect/qcom/sdm660.c +++ b/drivers/interconnect/qcom/sdm660.c @@ -44,9 +44,9 @@ #define NOC_PERM_MODE_BYPASS (1 << NOC_QOS_MODE_BYPASS) #define NOC_QOS_PRIORITYn_ADDR(n) (0x8 + (n * 0x1000)) -#define NOC_QOS_PRIORITY_MASK 0xf +#define NOC_QOS_PRIORITY_P1_MASK 0xc +#define NOC_QOS_PRIORITY_P0_MASK 0x3 #define NOC_QOS_PRIORITY_P1_SHIFT 0x2 -#define NOC_QOS_PRIORITY_P0_SHIFT 0x3 #define NOC_QOS_MODEn_ADDR(n) (0xc + (n * 0x1000)) #define NOC_QOS_MODEn_MASK 0x3 @@ -624,13 +624,12 @@ static int qcom_icc_noc_set_qos_priority(struct regmap *rmap, /* Must be updated one at a time, P1 first, P0 last */ val = qos->areq_prio << NOC_QOS_PRIORITY_P1_SHIFT; rc = regmap_update_bits(rmap, NOC_QOS_PRIORITYn_ADDR(qos->qos_port), - NOC_QOS_PRIORITY_MASK, val); + NOC_QOS_PRIORITY_P1_MASK, val); if (rc) return rc; - val = qos->prio_level << NOC_QOS_PRIORITY_P0_SHIFT; return regmap_update_bits(rmap, NOC_QOS_PRIORITYn_ADDR(qos->qos_port), - NOC_QOS_PRIORITY_MASK, val); + NOC_QOS_PRIORITY_P0_MASK, qos->prio_level); } static int qcom_icc_set_noc_qos(struct icc_node *src, u64 max_bw) -- cgit From cf49e366020396ad83845c1c3bdbaa3c1406f5ce Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Sep 2021 15:49:55 +0300 Subject: dt-bindings: interconnect: sdm660: Add missing a2noc qos clocks It adds the missing a2noc clocks required for QoS registers programming per downstream kernel[1]. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-bus.dtsi?h=LA.UM.8.2.r1-04800-sdm660.0#n43 Signed-off-by: Shawn Guo Reviewed-by: Rob Herring Acked-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20210824043435.23190-2-shawn.guo@linaro.org Signed-off-by: Georgi Djakov --- .../bindings/interconnect/qcom,sdm660.yaml | 46 ++++++++++++++++++++-- 1 file changed, 42 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml index 29de7807df54..bcd41e491f1d 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml @@ -31,11 +31,11 @@ properties: clocks: minItems: 1 - maxItems: 3 + maxItems: 7 clock-names: minItems: 1 - maxItems: 3 + maxItems: 7 required: - compatible @@ -72,6 +72,32 @@ allOf: contains: enum: - qcom,sdm660-a2noc + then: + properties: + clocks: + items: + - description: Bus Clock. + - description: Bus A Clock. + - description: IPA Clock. + - description: UFS AXI Clock. + - description: Aggregate2 UFS AXI Clock. + - description: Aggregate2 USB3 AXI Clock. + - description: Config NoC USB2 AXI Clock. + clock-names: + items: + - const: bus + - const: bus_a + - const: ipa + - const: ufs_axi + - const: aggre2_ufs_axi + - const: aggre2_usb3_axi + - const: cfg_noc_usb2_axi + + - if: + properties: + compatible: + contains: + enum: - qcom,sdm660-bimc - qcom,sdm660-cnoc - qcom,sdm660-gnoc @@ -91,6 +117,7 @@ examples: - | #include #include + #include bimc: interconnect@1008000 { compatible = "qcom,sdm660-bimc"; @@ -123,9 +150,20 @@ examples: compatible = "qcom,sdm660-a2noc"; reg = <0x01704000 0xc100>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; + clock-names = "bus", + "bus_a", + "ipa", + "ufs_axi", + "aggre2_ufs_axi", + "aggre2_usb3_axi", + "cfg_noc_usb2_axi"; clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, + <&rpmcc RPM_SMD_IPA_CLK>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB2_AXI_CLK>; }; mnoc: interconnect@1745000 { -- cgit From 13404ac8882f5225af07545215f4975a564c3740 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Sep 2021 15:49:55 +0300 Subject: interconnect: qcom: sdm660: Add missing a2noc qos clocks It adds the missing a2noc clocks required for QoS registers programming per downstream kernel[1]. Otherwise, qcom_icc_noc_set_qos_priority() call on mas_ufs or mas_usb_hs node will simply result in a hardware hang on SDM660 SoC. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-bus.dtsi?h=LA.UM.8.2.r1-04800-sdm660.0#n43 Signed-off-by: Shawn Guo Tested-by: Bjorn Andersson Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20210824043435.23190-3-shawn.guo@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sdm660.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/interconnect/qcom/sdm660.c b/drivers/interconnect/qcom/sdm660.c index 99eef7e2d326..fb23a5b780a4 100644 --- a/drivers/interconnect/qcom/sdm660.c +++ b/drivers/interconnect/qcom/sdm660.c @@ -173,6 +173,16 @@ static const struct clk_bulk_data bus_mm_clocks[] = { { .id = "iface" }, }; +static const struct clk_bulk_data bus_a2noc_clocks[] = { + { .id = "bus" }, + { .id = "bus_a" }, + { .id = "ipa" }, + { .id = "ufs_axi" }, + { .id = "aggre2_ufs_axi" }, + { .id = "aggre2_usb3_axi" }, + { .id = "cfg_noc_usb2_axi" }, +}; + /** * struct qcom_icc_provider - Qualcomm specific interconnect provider * @provider: generic interconnect provider @@ -809,6 +819,10 @@ static int qnoc_probe(struct platform_device *pdev) qp->bus_clks = devm_kmemdup(dev, bus_mm_clocks, sizeof(bus_mm_clocks), GFP_KERNEL); qp->num_clks = ARRAY_SIZE(bus_mm_clocks); + } else if (of_device_is_compatible(dev->of_node, "qcom,sdm660-a2noc")) { + qp->bus_clks = devm_kmemdup(dev, bus_a2noc_clocks, + sizeof(bus_a2noc_clocks), GFP_KERNEL); + qp->num_clks = ARRAY_SIZE(bus_a2noc_clocks); } else { if (of_device_is_compatible(dev->of_node, "qcom,sdm660-bimc")) qp->is_bimc_node = true; -- cgit From 6f44578430d7888ade1e3bd919c1c2c0724409e5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 13 Sep 2021 14:43:30 +0200 Subject: Revert "ALSA: hda: Drop workaround for a hang at shutdown again" This reverts commit 8fc8e903156f42c66245838441d03607e9067381. It was expected that the fixes in HD-audio codec side would make the workaround redundant, but unfortunately it doesn't seem sufficing. Resurrect the workaround for now. Fixes: 8fc8e903156f ("ALSA: hda: Drop workaround for a hang at shutdown again") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045 Link: https://lore.kernel.org/r/20210913124330.24530-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 3aa432d814a2..47777439961c 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -883,10 +883,11 @@ static unsigned int azx_get_pos_skl(struct azx *chip, struct azx_dev *azx_dev) return azx_get_pos_posbuf(chip, azx_dev); } -static void azx_shutdown_chip(struct azx *chip) +static void __azx_shutdown_chip(struct azx *chip, bool skip_link_reset) { azx_stop_chip(chip); - azx_enter_link_reset(chip); + if (!skip_link_reset) + azx_enter_link_reset(chip); azx_clear_irq_pending(chip); display_power(chip, false); } @@ -895,6 +896,11 @@ static void azx_shutdown_chip(struct azx *chip) static DEFINE_MUTEX(card_list_lock); static LIST_HEAD(card_list); +static void azx_shutdown_chip(struct azx *chip) +{ + __azx_shutdown_chip(chip, false); +} + static void azx_add_card_list(struct azx *chip) { struct hda_intel *hda = container_of(chip, struct hda_intel, chip); @@ -2357,7 +2363,7 @@ static void azx_shutdown(struct pci_dev *pci) return; chip = card->private_data; if (chip && chip->running) - azx_shutdown_chip(chip); + __azx_shutdown_chip(chip, true); } /* PCI IDs */ -- cgit From 7b9cf9036609428e845dc300aec13822ba2c4ab3 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 10 Sep 2021 12:51:55 +0200 Subject: ALSA: usb-audio: Unify mixer resume and reset_resume procedure USB-audio driver assumes that the normal resume would preserve the device configuration while reset_resume wouldn't, and tries to restore the mixer elements only at reset_resume callback. However, this seems too naive, and some devices do behave differently, resetting the volume at the normal resume; this resulted in the inconsistent volume that surprised users. This patch changes the mixer resume code to handle both the normal and reset resume in the same way, always restoring the original mixer element values. This allows us to unify the both callbacks as well as dropping the no longer used reset_resume field, which ends up with a good code reduction. A slight behavior change by this patch is that now we assign restore_mixer_value() as the default resume callback, and the function is no longer called at reset-resume when the resume callback is overridden by the quirk function. That is, if needed, the quirk resume function would have to handle similarly as restore_mixer_value() by itself. Reported-by: En-Shuo Hsu Cc: Yu-Hsuan Hsu Link: https://lore.kernel.org/r/CADDZ45UPsbpAAqP6=ZkTT8BE-yLii4Y7xSDnjK550G2DhQsMew@mail.gmail.com Link: https://lore.kernel.org/r/20210910105155.12862-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/card.c | 18 ++++-------------- sound/usb/mixer.c | 26 ++++---------------------- sound/usb/mixer.h | 3 +-- sound/usb/mixer_quirks.c | 2 +- 4 files changed, 10 insertions(+), 39 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index fd570a42f043..1764b9302d46 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -1054,7 +1054,7 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message) return 0; } -static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume) +static int usb_audio_resume(struct usb_interface *intf) { struct snd_usb_audio *chip = usb_get_intfdata(intf); struct snd_usb_stream *as; @@ -1080,7 +1080,7 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume) * we just notify and restart the mixers */ list_for_each_entry(mixer, &chip->mixer_list, list) { - err = snd_usb_mixer_resume(mixer, reset_resume); + err = snd_usb_mixer_resume(mixer); if (err < 0) goto err_out; } @@ -1100,20 +1100,10 @@ err_out: atomic_dec(&chip->active); /* allow autopm after this point */ return err; } - -static int usb_audio_resume(struct usb_interface *intf) -{ - return __usb_audio_resume(intf, false); -} - -static int usb_audio_reset_resume(struct usb_interface *intf) -{ - return __usb_audio_resume(intf, true); -} #else #define usb_audio_suspend NULL #define usb_audio_resume NULL -#define usb_audio_reset_resume NULL +#define usb_audio_resume NULL #endif /* CONFIG_PM */ static const struct usb_device_id usb_audio_ids [] = { @@ -1135,7 +1125,7 @@ static struct usb_driver usb_audio_driver = { .disconnect = usb_audio_disconnect, .suspend = usb_audio_suspend, .resume = usb_audio_resume, - .reset_resume = usb_audio_reset_resume, + .reset_resume = usb_audio_resume, .id_table = usb_audio_ids, .supports_autosuspend = 1, }; diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 43bc59575a6e..a2ce535df14b 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -3653,33 +3653,16 @@ static int restore_mixer_value(struct usb_mixer_elem_list *list) return 0; } -static int default_mixer_reset_resume(struct usb_mixer_elem_list *list) -{ - int err; - - if (list->resume) { - err = list->resume(list); - if (err < 0) - return err; - } - return restore_mixer_value(list); -} - -int snd_usb_mixer_resume(struct usb_mixer_interface *mixer, bool reset_resume) +int snd_usb_mixer_resume(struct usb_mixer_interface *mixer) { struct usb_mixer_elem_list *list; - usb_mixer_elem_resume_func_t f; int id, err; /* restore cached mixer values */ for (id = 0; id < MAX_ID_ELEMS; id++) { for_each_mixer_elem(list, mixer, id) { - if (reset_resume) - f = list->reset_resume; - else - f = list->resume; - if (f) { - err = f(list); + if (list->resume) { + err = list->resume(list); if (err < 0) return err; } @@ -3700,7 +3683,6 @@ void snd_usb_mixer_elem_init_std(struct usb_mixer_elem_list *list, list->id = unitid; list->dump = snd_usb_mixer_dump_cval; #ifdef CONFIG_PM - list->resume = NULL; - list->reset_resume = default_mixer_reset_resume; + list->resume = restore_mixer_value; #endif } diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h index 876bbc9a71ad..98ea24d91d80 100644 --- a/sound/usb/mixer.h +++ b/sound/usb/mixer.h @@ -70,7 +70,6 @@ struct usb_mixer_elem_list { bool is_std_info; usb_mixer_elem_dump_func_t dump; usb_mixer_elem_resume_func_t resume; - usb_mixer_elem_resume_func_t reset_resume; }; /* iterate over mixer element list of the given unit id */ @@ -121,7 +120,7 @@ int snd_usb_mixer_vol_tlv(struct snd_kcontrol *kcontrol, int op_flag, #ifdef CONFIG_PM int snd_usb_mixer_suspend(struct usb_mixer_interface *mixer); -int snd_usb_mixer_resume(struct usb_mixer_interface *mixer, bool reset_resume); +int snd_usb_mixer_resume(struct usb_mixer_interface *mixer); #endif int snd_usb_set_cur_mix_value(struct usb_mixer_elem_info *cval, int channel, diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index a66ce0375fd9..46082dc57be0 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -151,7 +151,7 @@ static int add_single_ctl_with_resume(struct usb_mixer_interface *mixer, *listp = list; list->mixer = mixer; list->id = id; - list->reset_resume = resume; + list->resume = resume; kctl = snd_ctl_new1(knew, list); if (!kctl) { kfree(list); -- cgit From d168cd797982db9db617113644c87b8f5f3cf27e Mon Sep 17 00:00:00 2001 From: Zhi A Wang Date: Thu, 26 Aug 2021 14:38:34 +0000 Subject: drm/i915/gvt: fix the usage of ww lock in gvt scheduler. As the APIs related to ww lock in i915 was changed recently, the usage of ww lock in GVT-g scheduler needs to be changed accrodingly. We noticed a deadlock when GVT-g scheduler submits the workload to i915. After some investigation, it seems the way of how to use ww lock APIs has been changed. Releasing a ww now requires a explicit i915_gem_ww_ctx_fini(). Fixes: 67f1120381df ("drm/i915/gvt: Introduce per object locking in GVT scheduler.") Cc: Zhenyu Wang Signed-off-by: Zhi A Wang Signed-off-by: Zhenyu Wang Link: http://patchwork.freedesktop.org/patch/msgid/20210826143834.25410-1-zhi.a.wang@intel.com Acked-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/scheduler.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c index 734c37c5e347..527b59b86312 100644 --- a/drivers/gpu/drm/i915/gvt/scheduler.c +++ b/drivers/gpu/drm/i915/gvt/scheduler.c @@ -576,7 +576,7 @@ retry: /* No one is going to touch shadow bb from now on. */ i915_gem_object_flush_map(bb->obj); - i915_gem_object_unlock(bb->obj); + i915_gem_ww_ctx_fini(&ww); } } return 0; @@ -630,7 +630,7 @@ retry: return ret; } - i915_gem_object_unlock(wa_ctx->indirect_ctx.obj); + i915_gem_ww_ctx_fini(&ww); /* FIXME: we are not tracking our pinned VMA leaving it * up to the core to fix up the stray pin_count upon -- cgit From 3110b942d36b961858664486d72f815d78c956c3 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Mon, 13 Sep 2021 16:25:56 -0300 Subject: IB/qib: Fix clang confusion of NULL pointer comparison clang becomes confused due to the comparison to NULL in a integer constant expression context: >> drivers/infiniband/hw/qib/qib_sysfs.c:413:1: error: static_assert expression is not an integral constant expression QIB_DIAGC_ATTR(rc_resends); ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/qib/qib_sysfs.c:406:16: note: expanded from macro 'QIB_DIAGC_ATTR' static_assert(&((struct qib_ibport *)0)->rvp.n_##N != (u64 *)NULL); \ Nathan found __same_type that solves this problem nicely, so use it instead. Reported-by: kernel test robot Suggested-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qib/qib_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/qib/qib_sysfs.c b/drivers/infiniband/hw/qib/qib_sysfs.c index 452e2355d24e..0a3b28142c05 100644 --- a/drivers/infiniband/hw/qib/qib_sysfs.c +++ b/drivers/infiniband/hw/qib/qib_sysfs.c @@ -403,7 +403,7 @@ static ssize_t diagc_attr_store(struct ib_device *ibdev, u32 port_num, } #define QIB_DIAGC_ATTR(N) \ - static_assert(&((struct qib_ibport *)0)->rvp.n_##N != (u64 *)NULL); \ + static_assert(__same_type(((struct qib_ibport *)0)->rvp.n_##N, u64)); \ static struct qib_diagc_attr qib_diagc_attr_##N = { \ .attr = __ATTR(N, 0664, diagc_attr_show, diagc_attr_store), \ .counter = \ -- cgit From 099dd788e31b4f426ef49c2785069804925a84e1 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 13 Sep 2021 14:51:10 -0500 Subject: cifs: remove pathname for file from SPDX header checkpatch complains about source files with filenames (e.g. in these cases just below the SPDX header in comments at the top of various files in fs/cifs). It also is helpful to change this now so will be less confusing when the parent directory is renamed e.g. from fs/cifs to fs/smb_client (or fs/smbfs) Reviewed-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/cache.c | 2 +- fs/cifs/cifs_debug.c | 1 - fs/cifs/cifs_fs_sb.h | 1 - fs/cifs/cifs_ioctl.h | 1 - fs/cifs/cifs_spnego.c | 2 +- fs/cifs/cifs_spnego.h | 2 +- fs/cifs/cifs_unicode.c | 1 - fs/cifs/cifsacl.c | 1 - fs/cifs/cifsacl.h | 1 - fs/cifs/cifsencrypt.c | 1 - fs/cifs/cifsfs.c | 1 - fs/cifs/cifsfs.h | 1 - fs/cifs/cifsglob.h | 1 - fs/cifs/cifspdu.h | 1 - fs/cifs/cifsproto.h | 1 - fs/cifs/cifssmb.c | 1 - fs/cifs/connect.c | 1 - fs/cifs/dir.c | 1 - fs/cifs/dns_resolve.c | 1 - fs/cifs/dns_resolve.h | 4 ++-- fs/cifs/export.c | 1 - fs/cifs/file.c | 1 - fs/cifs/fscache.c | 2 +- fs/cifs/fscache.h | 2 +- fs/cifs/inode.c | 1 - fs/cifs/ioctl.c | 1 - fs/cifs/link.c | 1 - fs/cifs/misc.c | 1 - fs/cifs/netmisc.c | 1 - fs/cifs/ntlmssp.h | 1 - fs/cifs/readdir.c | 1 - fs/cifs/rfc1002pdu.h | 1 - fs/cifs/sess.c | 1 - fs/cifs/smb2file.c | 1 - fs/cifs/smb2glob.h | 1 - fs/cifs/smb2inode.c | 1 - fs/cifs/smb2misc.c | 1 - fs/cifs/smb2pdu.c | 1 - fs/cifs/smb2pdu.h | 1 - fs/cifs/smb2proto.h | 1 - fs/cifs/smb2status.h | 1 - fs/cifs/smb2transport.c | 1 - fs/cifs/smberr.h | 1 - fs/cifs/transport.c | 1 - fs/cifs/winucase.c | 1 - fs/cifs/xattr.c | 1 - fs/smbfs_common/smbfsctl.h | 2 +- include/uapi/linux/cifs/cifs_mount.h | 1 - 48 files changed, 8 insertions(+), 49 deletions(-) diff --git a/fs/cifs/cache.c b/fs/cifs/cache.c index 8a3b30ec860c..8be57aaedab6 100644 --- a/fs/cifs/cache.c +++ b/fs/cifs/cache.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cache.c - CIFS filesystem cache index structure definitions + * CIFS filesystem cache index structure definitions * * Copyright (c) 2010 Novell, Inc. * Authors(s): Suresh Jayaraman (sjayaraman@suse.de> diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 51a824fc926a..de2c12bcfa4b 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * fs/cifs_debug.c * * Copyright (C) International Business Machines Corp., 2000,2005 * diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h index 4fd788586399..f97407520ea1 100644 --- a/fs/cifs/cifs_fs_sb.h +++ b/fs/cifs/cifs_fs_sb.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifs_fs_sb.h * * Copyright (c) International Business Machines Corp., 2002,2004 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifs_ioctl.h b/fs/cifs/cifs_ioctl.h index ef723be358af..b87cbbe6d2d4 100644 --- a/fs/cifs/cifs_ioctl.h +++ b/fs/cifs/cifs_ioctl.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifs_ioctl.h * * Structure definitions for io control for cifs/smb3 * diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c index 8fa26a8530f8..353bd0dd7026 100644 --- a/fs/cifs/cifs_spnego.c +++ b/fs/cifs/cifs_spnego.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cifs_spnego.c -- SPNEGO upcall management for CIFS + * SPNEGO upcall management for CIFS * * Copyright (c) 2007 Red Hat, Inc. * Author(s): Jeff Layton (jlayton@redhat.com) diff --git a/fs/cifs/cifs_spnego.h b/fs/cifs/cifs_spnego.h index 31387d0ea32e..e6a0451877d4 100644 --- a/fs/cifs/cifs_spnego.h +++ b/fs/cifs/cifs_spnego.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifs_spnego.h -- SPNEGO upcall management for CIFS + * SPNEGO upcall management for CIFS * * Copyright (c) 2007 Red Hat, Inc. * Author(s): Jeff Layton (jlayton@redhat.com) diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c index 171ad8b42107..e7582dd79179 100644 --- a/fs/cifs/cifs_unicode.c +++ b/fs/cifs/cifs_unicode.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * fs/cifs/cifs_unicode.c * * Copyright (c) International Business Machines Corp., 2000,2009 * Modified by Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index 388eb536cff1..ee3aab3dd4ac 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cifsacl.c * * Copyright (C) International Business Machines Corp., 2007,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsacl.h b/fs/cifs/cifsacl.h index f8292bcf8594..ccbfc754bd3c 100644 --- a/fs/cifs/cifsacl.h +++ b/fs/cifs/cifsacl.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifsacl.h * * Copyright (c) International Business Machines Corp., 2007 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index 2e6f40344037..d118282071b3 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cifsencrypt.c * * Encryption and hashing operations relating to NTLM, NTLMv2. See MS-NLMP * for more detailed information diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 8c20bfa187ac..9fa930dfd78d 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cifsfs.c * * Copyright (C) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index d25a4099b32e..b50da1901ebd 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifsfs.h * * Copyright (c) International Business Machines Corp., 2002, 2007 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index c068f7d8d879..7dd9878e26bf 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifsglob.h * * Copyright (C) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 98e8e5aa0613..d2ff438fd31f 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifspdu.h * * Copyright (c) International Business Machines Corp., 2002,2009 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index f9740c21ca3d..54966c1a8eb6 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/cifsproto.h * * Copyright (c) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index a8e41c1e80ca..243d17696f06 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/cifssmb.c * * Copyright (C) International Business Machines Corp., 2002,2010 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 0db344807ef1..399a0f084573 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/connect.c * * Copyright (C) International Business Machines Corp., 2002,2011 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 5f8a302ffcb2..6e8e7cc26ae2 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/dir.c * * vfs operations that deal with dentries * diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c index 8c616aaeb7c4..0458d28d71aa 100644 --- a/fs/cifs/dns_resolve.c +++ b/fs/cifs/dns_resolve.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/dns_resolve.c * * Copyright (c) 2007 Igor Mammedov * Author(s): Igor Mammedov (niallain@gmail.com) diff --git a/fs/cifs/dns_resolve.h b/fs/cifs/dns_resolve.h index 9fa2807ef79e..afc0df381246 100644 --- a/fs/cifs/dns_resolve.h +++ b/fs/cifs/dns_resolve.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/dns_resolve.h -- DNS Resolver upcall management for CIFS DFS - * Handles host name to IP address resolution + * DNS Resolver upcall management for CIFS DFS + * Handles host name to IP address resolution * * Copyright (c) International Business Machines Corp., 2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/export.c b/fs/cifs/export.c index 747a540db954..37c28415df1e 100644 --- a/fs/cifs/export.c +++ b/fs/cifs/export.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/export.c * * Copyright (C) International Business Machines Corp., 2007 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index d0216472f1c6..4d10c9343890 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/file.c * * vfs operations that deal with files * diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c index fab47fa7df74..8eedd20c44ab 100644 --- a/fs/cifs/fscache.c +++ b/fs/cifs/fscache.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/fscache.c - CIFS filesystem cache interface + * CIFS filesystem cache interface * * Copyright (c) 2010 Novell, Inc. * Author(s): Suresh Jayaraman diff --git a/fs/cifs/fscache.h b/fs/cifs/fscache.h index 82e856b9cf89..9baa1d0f22bd 100644 --- a/fs/cifs/fscache.h +++ b/fs/cifs/fscache.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/fscache.h - CIFS filesystem cache interface definitions + * CIFS filesystem cache interface definitions * * Copyright (c) 2010 Novell, Inc. * Authors(s): Suresh Jayaraman (sjayaraman@suse.de> diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 50c01cff4c84..19af2d0ec8d5 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/inode.c * * Copyright (C) International Business Machines Corp., 2002,2010 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c index 42c6a0bac6c8..44ae99454fb3 100644 --- a/fs/cifs/ioctl.c +++ b/fs/cifs/ioctl.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/ioctl.c * * vfs operations that deal with io control * diff --git a/fs/cifs/link.c b/fs/cifs/link.c index f0a6d63bc08c..852e54ee82c2 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/link.c * * Copyright (C) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 9469f1cf0b46..f4313935e734 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/misc.c * * Copyright (C) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c index 0e728aac67e9..fa9fbd6a819c 100644 --- a/fs/cifs/netmisc.c +++ b/fs/cifs/netmisc.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * fs/cifs/netmisc.c * * Copyright (c) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/ntlmssp.h b/fs/cifs/ntlmssp.h index 378133ce8869..25a2b8ef88b9 100644 --- a/fs/cifs/ntlmssp.h +++ b/fs/cifs/ntlmssp.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/ntlmssp.h * * Copyright (c) International Business Machines Corp., 2002,2007 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 54d77c99e21c..1929e80c09ee 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/readdir.c * * Directory search handling * diff --git a/fs/cifs/rfc1002pdu.h b/fs/cifs/rfc1002pdu.h index 137f7c95afd6..ae1d025da294 100644 --- a/fs/cifs/rfc1002pdu.h +++ b/fs/cifs/rfc1002pdu.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/rfc1002pdu.h * * Protocol Data Unit definitions for RFC 1001/1002 support * diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 118403fbeda2..23e02db7923f 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/sess.c * * SMB/CIFS session setup handling routines * diff --git a/fs/cifs/smb2file.c b/fs/cifs/smb2file.c index c9d8a50062b8..f5dcc4940b6d 100644 --- a/fs/cifs/smb2file.c +++ b/fs/cifs/smb2file.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/smb2file.c * * Copyright (C) International Business Machines Corp., 2002, 2011 * Author(s): Steve French (sfrench@us.ibm.com), diff --git a/fs/cifs/smb2glob.h b/fs/cifs/smb2glob.h index d0e9f3782bd9..ca692b2283cd 100644 --- a/fs/cifs/smb2glob.h +++ b/fs/cifs/smb2glob.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/smb2glob.h * * Definitions for various global variables and structures * diff --git a/fs/cifs/smb2inode.c b/fs/cifs/smb2inode.c index 957b2594f02e..8297703492ee 100644 --- a/fs/cifs/smb2inode.c +++ b/fs/cifs/smb2inode.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/smb2inode.c * * Copyright (C) International Business Machines Corp., 2002, 2011 * Etersoft, 2012 diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c index 668f77108831..29b5554f6263 100644 --- a/fs/cifs/smb2misc.c +++ b/fs/cifs/smb2misc.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/smb2misc.c * * Copyright (C) International Business Machines Corp., 2002,2011 * Etersoft, 2012 diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index b6d2e3591927..672ae78e866a 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/smb2pdu.c * * Copyright (C) International Business Machines Corp., 2009, 2013 * Etersoft, 2012 diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index e9cac7970b66..f32c99c9ba13 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/smb2pdu.h * * Copyright (c) International Business Machines Corp., 2009, 2013 * Etersoft, 2012 diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h index 263767f644f8..547945443fa7 100644 --- a/fs/cifs/smb2proto.h +++ b/fs/cifs/smb2proto.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/smb2proto.h * * Copyright (c) International Business Machines Corp., 2002, 2011 * Etersoft, 2012 diff --git a/fs/cifs/smb2status.h b/fs/cifs/smb2status.h index 0215ef36e240..a9e958166fc5 100644 --- a/fs/cifs/smb2status.h +++ b/fs/cifs/smb2status.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/smb2status.h * * SMB2 Status code (network error) definitions * Definitions are from MS-ERREF diff --git a/fs/cifs/smb2transport.c b/fs/cifs/smb2transport.c index 6f7952ea4941..f59b956f9d25 100644 --- a/fs/cifs/smb2transport.c +++ b/fs/cifs/smb2transport.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/smb2transport.c * * Copyright (C) International Business Machines Corp., 2002, 2011 * Etersoft, 2012 diff --git a/fs/cifs/smberr.h b/fs/cifs/smberr.h index 60189efb3236..aeffdad829e2 100644 --- a/fs/cifs/smberr.h +++ b/fs/cifs/smberr.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1 */ /* - * fs/cifs/smberr.h * * Copyright (c) International Business Machines Corp., 2002,2004 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 75a95de320cf..b7379329b741 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/transport.c * * Copyright (C) International Business Machines Corp., 2002,2008 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/cifs/winucase.c b/fs/cifs/winucase.c index 59b6c577aa0a..2f075b5b50df 100644 --- a/fs/cifs/winucase.c +++ b/fs/cifs/winucase.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * fs/cifs/winucase.c * * Copyright (c) Jeffrey Layton , 2013 * diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c index 9ed481e79ce0..7d8b72d67c80 100644 --- a/fs/cifs/xattr.c +++ b/fs/cifs/xattr.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: LGPL-2.1 /* - * fs/cifs/xattr.c * * Copyright (c) International Business Machines Corp., 2003, 2007 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/fs/smbfs_common/smbfsctl.h b/fs/smbfs_common/smbfsctl.h index d01e8c9d7a31..926f87cd6af0 100644 --- a/fs/smbfs_common/smbfsctl.h +++ b/fs/smbfs_common/smbfsctl.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: LGPL-2.1+ */ /* - * fs/cifs/smbfsctl.h: SMB, CIFS, SMB2 FSCTL definitions + * SMB, CIFS, SMB2 FSCTL definitions * * Copyright (c) International Business Machines Corp., 2002,2013 * Author(s): Steve French (sfrench@us.ibm.com) diff --git a/include/uapi/linux/cifs/cifs_mount.h b/include/uapi/linux/cifs/cifs_mount.h index 69829205fdb5..8e87d27b0951 100644 --- a/include/uapi/linux/cifs/cifs_mount.h +++ b/include/uapi/linux/cifs/cifs_mount.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: LGPL-2.1+ WITH Linux-syscall-note */ /* - * include/uapi/linux/cifs/cifs_mount.h * * Author(s): Scott Lovenberg (scott.lovenberg@gmail.com) * -- cgit From 7bbc3d385bd813077acaf0e6fdb2a86a901f5382 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Mon, 6 Sep 2021 18:26:34 +0200 Subject: netfilter: ipset: Fix oversized kvmalloc() calls The commit commit 7661809d493b426e979f39ab512e3adf41fbcc69 Author: Linus Torvalds Date: Wed Jul 14 09:45:49 2021 -0700 mm: don't allow oversized kvmalloc() calls limits the max allocatable memory via kvmalloc() to MAX_INT. Apply the same limit in ipset. Reported-by: syzbot+3493b1873fb3ea827986@syzkaller.appspotmail.com Reported-by: syzbot+2b8443c35458a617c904@syzkaller.appspotmail.com Reported-by: syzbot+ee5cb15f4a0e85e0d54e@syzkaller.appspotmail.com Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_hash_gen.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h index 6186358eac7c..6e391308431d 100644 --- a/net/netfilter/ipset/ip_set_hash_gen.h +++ b/net/netfilter/ipset/ip_set_hash_gen.h @@ -130,11 +130,11 @@ htable_size(u8 hbits) { size_t hsize; - /* We must fit both into u32 in jhash and size_t */ + /* We must fit both into u32 in jhash and INT_MAX in kvmalloc_node() */ if (hbits > 31) return 0; hsize = jhash_size(hbits); - if ((((size_t)-1) - sizeof(struct htable)) / sizeof(struct hbucket *) + if ((INT_MAX - sizeof(struct htable)) / sizeof(struct hbucket *) < hsize) return 0; -- cgit From 69e73dbfda14fbfe748d3812da1244cce2928dcb Mon Sep 17 00:00:00 2001 From: Andrea Claudi Date: Fri, 10 Sep 2021 18:08:39 +0200 Subject: ipvs: check that ip_vs_conn_tab_bits is between 8 and 20 ip_vs_conn_tab_bits may be provided by the user through the conn_tab_bits module parameter. If this value is greater than 31, or less than 0, the shift operator used to derive tab_size causes undefined behaviour. Fix this checking ip_vs_conn_tab_bits value to be in the range specified in ipvs Kconfig. If not, simply use default value. Fixes: 6f7edb4881bf ("IPVS: Allow boot time change of hash size") Reported-by: Yi Chen Signed-off-by: Andrea Claudi Acked-by: Julian Anastasov Acked-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_conn.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c index c100c6b112c8..2c467c422dc6 100644 --- a/net/netfilter/ipvs/ip_vs_conn.c +++ b/net/netfilter/ipvs/ip_vs_conn.c @@ -1468,6 +1468,10 @@ int __init ip_vs_conn_init(void) int idx; /* Compute size and mask */ + if (ip_vs_conn_tab_bits < 8 || ip_vs_conn_tab_bits > 20) { + pr_info("conn_tab_bits not in [8, 20]. Using default value\n"); + ip_vs_conn_tab_bits = CONFIG_IP_VS_TAB_BITS; + } ip_vs_conn_tab_size = 1 << ip_vs_conn_tab_bits; ip_vs_conn_tab_mask = ip_vs_conn_tab_size - 1; -- cgit From 4c51de1e8f928a5b05248714d832d7d991ac319a Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 13 Sep 2021 18:29:46 -0500 Subject: cifs: fix incorrect kernel doc comments Correct kernel-doc comments pointed out by the automated kernel test robot. Reported-by: kernel test robot Signed-off-by: Steve French --- fs/cifs/connect.c | 12 ++++++++++-- fs/cifs/ioctl.c | 2 +- 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 399a0f084573..7881115cfbee 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1089,7 +1089,7 @@ next_pdu: module_put_and_exit(0); } -/** +/* * Returns true if srcaddr isn't specified and rhs isn't specified, or * if srcaddr is specified and matches the IP address of the rhs argument */ @@ -1549,6 +1549,9 @@ static int match_session(struct cifs_ses *ses, struct smb3_fs_context *ctx) /** * cifs_setup_ipc - helper to setup the IPC tcon for the session + * @ses: smb session to issue the request on + * @ctx: the superblock configuration context to use for building the + * new tree connection for the IPC (interprocess communication RPC) * * A new IPC connection is made and stored in the session * tcon_ipc. The IPC tcon has the same lifetime as the session. @@ -1604,6 +1607,7 @@ out: /** * cifs_free_ipc - helper to release the session IPC tcon + * @ses: smb session to unmount the IPC from * * Needs to be called everytime a session is destroyed. * @@ -1854,6 +1858,8 @@ cifs_set_cifscreds(struct smb3_fs_context *ctx __attribute__((unused)), /** * cifs_get_smb_ses - get a session matching @ctx data from @server + * @server: server to setup the session to + * @ctx: superblock configuration context to use to setup the session * * This function assumes it is being called from cifs_mount() where we * already got a server reference (server refcount +1). See @@ -2064,6 +2070,8 @@ cifs_put_tcon(struct cifs_tcon *tcon) /** * cifs_get_tcon - get a tcon matching @ctx data from @ses + * @ses: smb session to issue the request on + * @ctx: the superblock configuration context to use for building the * * - tcon refcount is the number of mount points using the tcon. * - ses refcount is the number of tcon using the session. @@ -3029,7 +3037,7 @@ build_unc_path_to_root(const struct smb3_fs_context *ctx, return full_path; } -/** +/* * expand_dfs_referral - Perform a dfs referral query and update the cifs_sb * * If a referral is found, cifs_sb->ctx->mount_options will be (re-)allocated diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c index 44ae99454fb3..0359b604bdbc 100644 --- a/fs/cifs/ioctl.c +++ b/fs/cifs/ioctl.c @@ -358,7 +358,7 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg) if (pSMBFile == NULL) break; tcon = tlink_tcon(pSMBFile->tlink); - caps = le64_to_cpu(tcon->fsUnixInfo.Capability); + /* caps = le64_to_cpu(tcon->fsUnixInfo.Capability); */ if (get_user(ExtAttrBits, (int __user *)arg)) { rc = -EFAULT; -- cgit From 6a2ea0d34af1ca807d5ba6a8350a037ff3cd35cc Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Tue, 17 Aug 2021 16:55:31 -0700 Subject: scsi: st: Add missing break in switch statement in st_ioctl() Clang + -Wimplicit-fallthrough warns: drivers/scsi/st.c:3831:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] default: ^ drivers/scsi/st.c:3831:2: note: insert 'break;' to avoid fall-through default: ^ break; 1 warning generated. Clang's -Wimplicit-fallthrough is a little bit more pedantic than GCC's, requiring every case block to end in break, return, or fallthrough, rather than allowing implicit fallthroughs to cases that just contain break or return. Add a break so that there is no more warning, as has been done all over the tree already. Link: https://lore.kernel.org/r/20210817235531.172995-1-nathan@kernel.org Fixes: 2e27f576abc6 ("scsi: scsi_ioctl: Call scsi_cmd_ioctl() from scsi_ioctl()") Reviewed-by: Gustavo A. R. Silva Signed-off-by: Nathan Chancellor Signed-off-by: Martin K. Petersen --- drivers/scsi/st.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 9d04929f03a1..ae8636d3780b 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -3823,6 +3823,7 @@ static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg) case CDROM_SEND_PACKET: if (!capable(CAP_SYS_RAWIO)) return -EPERM; + break; default: break; } -- cgit From 96fafe7c6523886308605d30ec92c7936abe7c2c Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 30 Aug 2021 16:10:50 -0700 Subject: scsi: elx: efct: Fix void-pointer-to-enum-cast warning for efc_nport_topology The kernel test robot flagged an warning for ".../efc_device.c:932:6: warning: cast to smaller integer type 'enum efc_nport_topology' from 'void *'" For the topology events, the "arg" field is generically defined as a void * and is used to pass different arguments. Most of the arguments are pointers to data structures. But for the EFC_EVT_NPORT_TOPOLOGY_NOTIFY event, the argument is an enum value, and the code is typecasting the void * to an enum generating the warning. Fix by converting the EFC_EVT_NPORT_TOPOLOGY_NOTIFY event to pass a pointer to the enum, thus it's a straight-forward pointer dereference in the event handler. Link: https://lore.kernel.org/r/20210830231050.5951-1-jsmart2021@gmail.com Fixes: 202bfdffae27 ("scsi: elx: libefc: FC node ELS and state handling") Reported-by: kernel test robot Co-developed-by: Ram Vegesna Signed-off-by: Ram Vegesna Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/elx/libefc/efc_device.c | 7 +++---- drivers/scsi/elx/libefc/efc_fabric.c | 3 +-- 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/elx/libefc/efc_device.c b/drivers/scsi/elx/libefc/efc_device.c index 725ca2a23fb2..52be01333c6e 100644 --- a/drivers/scsi/elx/libefc/efc_device.c +++ b/drivers/scsi/elx/libefc/efc_device.c @@ -928,22 +928,21 @@ __efc_d_wait_topology_notify(struct efc_sm_ctx *ctx, break; case EFC_EVT_NPORT_TOPOLOGY_NOTIFY: { - enum efc_nport_topology topology = - (enum efc_nport_topology)arg; + enum efc_nport_topology *topology = arg; WARN_ON(node->nport->domain->attached); WARN_ON(node->send_ls_acc != EFC_NODE_SEND_LS_ACC_PLOGI); node_printf(node, "topology notification, topology=%d\n", - topology); + *topology); /* At the time the PLOGI was received, the topology was unknown, * so we didn't know which node would perform the domain attach: * 1. The node from which the PLOGI was sent (p2p) or * 2. The node to which the FLOGI was sent (fabric). */ - if (topology == EFC_NPORT_TOPO_P2P) { + if (*topology == EFC_NPORT_TOPO_P2P) { /* if this is p2p, need to attach to the domain using * the d_id from the PLOGI received */ diff --git a/drivers/scsi/elx/libefc/efc_fabric.c b/drivers/scsi/elx/libefc/efc_fabric.c index d397220d9e54..3270ce40196c 100644 --- a/drivers/scsi/elx/libefc/efc_fabric.c +++ b/drivers/scsi/elx/libefc/efc_fabric.c @@ -107,7 +107,6 @@ void efc_fabric_notify_topology(struct efc_node *node) { struct efc_node *tmp_node; - enum efc_nport_topology topology = node->nport->topology; unsigned long index; /* @@ -118,7 +117,7 @@ efc_fabric_notify_topology(struct efc_node *node) if (tmp_node != node) { efc_node_post_event(tmp_node, EFC_EVT_NPORT_TOPOLOGY_NOTIFY, - (void *)topology); + &node->nport->topology); } } } -- cgit From 59936430e6a6acb0ef943e9306506b2e9c2e45a8 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 30 Aug 2021 16:12:43 -0700 Subject: scsi: lpfc: Fix CPU to/from endian warnings introduced by ELS processing The kernel test robot reported the following sparse warning: ".../lpfc_els.c:3984:25: sparse: sparse: cast from restricted __be16" For the error being flagged, using be32_to_cpu() on a be16 data type, it was simple enough. But a review of other elements and warnings were also evaluated. This patch corrected several items in the original patch: - Using be32_to_cpu() on a be16 data type - cpu_to_le32() used on a std uint32_t (CPU) data type. Note: This is a byte array, but stored in LE layout by hardware at 32-bit boundaries. So it possibly needed conversion. - Using cpu_to_le32() on a std uint16_t and assigned to a char typeA - Using le32_to_cpu() on a le16 type - Missing cpu_to_le16() on an assignment Link: https://lore.kernel.org/r/20210830231243.6227-1-jsmart2021@gmail.com Fixes: 9064aeb2df8e ("scsi: lpfc: Add EDC ELS support") Reported-by: kernel test robot Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_els.c | 8 ++++---- drivers/scsi/lpfc/lpfc_hw4.h | 2 +- drivers/scsi/lpfc/lpfc_init.c | 16 ++++++++-------- drivers/scsi/lpfc/lpfc_sli.c | 5 +++-- 4 files changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 1254a575fd47..f3fc79b99165 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -4015,11 +4015,11 @@ lpfc_cmpl_els_edc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, be32_to_cpu(pcgd->desc_tag), be32_to_cpu(pcgd->desc_len), be32_to_cpu(pcgd->xmt_signal_capability), - be32_to_cpu(pcgd->xmt_signal_frequency.count), - be32_to_cpu(pcgd->xmt_signal_frequency.units), + be16_to_cpu(pcgd->xmt_signal_frequency.count), + be16_to_cpu(pcgd->xmt_signal_frequency.units), be32_to_cpu(pcgd->rcv_signal_capability), - be32_to_cpu(pcgd->rcv_signal_frequency.count), - be32_to_cpu(pcgd->rcv_signal_frequency.units)); + be16_to_cpu(pcgd->rcv_signal_frequency.count), + be16_to_cpu(pcgd->rcv_signal_frequency.units)); /* Compare driver and Fport capabilities and choose * least common. diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 79a4872c2edb..7359505e6041 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -1167,7 +1167,7 @@ struct lpfc_mbx_read_object { /* Version 0 */ #define lpfc_mbx_rd_object_rlen_MASK 0x00FFFFFF #define lpfc_mbx_rd_object_rlen_WORD word0 uint32_t rd_object_offset; - uint32_t rd_object_name[LPFC_MBX_OBJECT_NAME_LEN_DW]; + __le32 rd_object_name[LPFC_MBX_OBJECT_NAME_LEN_DW]; #define LPFC_OBJ_NAME_SZ 104 /* 26 x sizeof(uint32_t) is 104. */ uint32_t rd_object_cnt; struct lpfc_mbx_host_buf rd_object_hbuf[4]; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 0ec322f0e3cb..597e5a1ef060 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -5518,7 +5518,7 @@ lpfc_cgn_update_stat(struct lpfc_hba *phba, uint32_t dtag) if (phba->cgn_fpin_frequency && phba->cgn_fpin_frequency != LPFC_FPIN_INIT_FREQ) { value = LPFC_CGN_TIMER_TO_MIN / phba->cgn_fpin_frequency; - cp->cgn_stat_npm = cpu_to_le32(value); + cp->cgn_stat_npm = value; } value = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ, LPFC_CGN_CRC32_SEED); @@ -5547,9 +5547,9 @@ lpfc_cgn_save_evt_cnt(struct lpfc_hba *phba) uint32_t mbps; uint32_t dvalue, wvalue, lvalue, avalue; uint64_t latsum; - uint16_t *ptr; - uint32_t *lptr; - uint16_t *mptr; + __le16 *ptr; + __le32 *lptr; + __le16 *mptr; /* Make sure we have a congestion info buffer */ if (!phba->cgn_i) @@ -5570,7 +5570,7 @@ lpfc_cgn_save_evt_cnt(struct lpfc_hba *phba) if (phba->cgn_fpin_frequency && phba->cgn_fpin_frequency != LPFC_FPIN_INIT_FREQ) { value = LPFC_CGN_TIMER_TO_MIN / phba->cgn_fpin_frequency; - cp->cgn_stat_npm = cpu_to_le32(value); + cp->cgn_stat_npm = value; } /* Read and clear the latency counters for this minute */ @@ -5753,7 +5753,7 @@ lpfc_cgn_save_evt_cnt(struct lpfc_hba *phba) dvalue += le32_to_cpu(cp->cgn_drvr_hr[i]); wvalue += le32_to_cpu(cp->cgn_warn_hr[i]); lvalue += le32_to_cpu(cp->cgn_latency_hr[i]); - mbps += le32_to_cpu(cp->cgn_bw_hr[i]); + mbps += le16_to_cpu(cp->cgn_bw_hr[i]); avalue += le32_to_cpu(cp->cgn_alarm_hr[i]); } if (lvalue) /* Avg of latency averages */ @@ -13411,8 +13411,8 @@ lpfc_init_congestion_buf(struct lpfc_hba *phba) /* last used Index initialized to 0xff already */ - cp->cgn_warn_freq = LPFC_FPIN_INIT_FREQ; - cp->cgn_alarm_freq = LPFC_FPIN_INIT_FREQ; + cp->cgn_warn_freq = cpu_to_le16(LPFC_FPIN_INIT_FREQ); + cp->cgn_alarm_freq = cpu_to_le16(LPFC_FPIN_INIT_FREQ); crc = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ, LPFC_CGN_CRC32_SEED); cp->cgn_info_crc = cpu_to_le32(crc); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index ffd8a140638c..78ce38d7251c 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -22090,6 +22090,7 @@ lpfc_read_object(struct lpfc_hba *phba, char *rdobject, uint32_t *datap, uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; struct lpfc_dmabuf *pcmd; + u32 rd_object_name[LPFC_MBX_OBJECT_NAME_LEN_DW] = {0}; /* sanity check on queue memory */ if (!datap) @@ -22113,10 +22114,10 @@ lpfc_read_object(struct lpfc_hba *phba, char *rdobject, uint32_t *datap, memset((void *)read_object->u.request.rd_object_name, 0, LPFC_OBJ_NAME_SZ); - sprintf((uint8_t *)read_object->u.request.rd_object_name, rdobject); + scnprintf((char *)rd_object_name, sizeof(rd_object_name), rdobject); for (j = 0; j < strlen(rdobject); j++) read_object->u.request.rd_object_name[j] = - cpu_to_le32(read_object->u.request.rd_object_name[j]); + cpu_to_le32(rd_object_name[j]); pcmd = kmalloc(sizeof(*pcmd), GFP_KERNEL); if (pcmd) -- cgit From 37e384095f20cca728500fe5344cd308aa6fd7ff Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 7 Sep 2021 22:09:27 -0700 Subject: scsi: lpfc: Fix compilation errors on kernels with no CONFIG_DEBUG_FS The Kernel test robot flagged the following warning: ".../lpfc_init.c:7788:35: error: 'struct lpfc_sli4_hba' has no member named 'c_stat'" Reviewing this issue highlighted that one of the recent patches caused the driver to no longer compile cleanly if CONFIG_DEBUG_FS is not set. Correct the different areas that are failing to compile. Link: https://lore.kernel.org/r/20210908050927.37275-1-jsmart2021@gmail.com Fixes: 02243836ad6f ("scsi: lpfc: Add support for the CM framework") Reviewed-by: Nathan Chancellor Build-tested-by: Nathan Chancellor Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_init.c | 4 ++-- drivers/scsi/lpfc/lpfc_nvme.c | 2 -- drivers/scsi/lpfc/lpfc_scsi.c | 6 +----- 3 files changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 597e5a1ef060..195169badb37 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -8277,11 +8277,11 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) return 0; out_free_hba_hdwq_info: - free_percpu(phba->sli4_hba.c_stat); #ifdef CONFIG_SCSI_LPFC_DEBUG_FS + free_percpu(phba->sli4_hba.c_stat); out_free_hba_idle_stat: - kfree(phba->sli4_hba.idle_stat); #endif + kfree(phba->sli4_hba.idle_stat); out_free_hba_eq_info: free_percpu(phba->sli4_hba.eq_info); out_free_hba_cpu_map: diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c index 73a3568ff17e..479b3eed6208 100644 --- a/drivers/scsi/lpfc/lpfc_nvme.c +++ b/drivers/scsi/lpfc/lpfc_nvme.c @@ -1489,9 +1489,7 @@ lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport, struct lpfc_nvme_qhandle *lpfc_queue_info; struct lpfc_nvme_fcpreq_priv *freqpriv; struct nvme_common_command *sqe; -#ifdef CONFIG_SCSI_LPFC_DEBUG_FS uint64_t start = 0; -#endif /* Validate pointers. LLDD fault handling with transport does * have timing races. diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 0fde1e874c7a..63d8ac9f68a7 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -5578,12 +5578,8 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd) struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device)); int err, idx; u8 *uuid = NULL; -#ifdef CONFIG_SCSI_LPFC_DEBUG_FS - uint64_t start = 0L; + uint64_t start; - if (phba->ktime_on) - start = ktime_get_ns(); -#endif start = ktime_get_ns(); rdata = lpfc_rport_data_from_scsi_device(cmnd->device); -- cgit From 5d1e15108b8d058d537f19cdef4170d2ae4eed08 Mon Sep 17 00:00:00 2001 From: Chi Minghao Date: Tue, 31 Aug 2021 04:40:58 -0700 Subject: scsi: lpfc: Remove unneeded variable Fix the following coccicheck REVIEW: ./drivers/scsi/lpfc/lpfc_scsi.c:1498:9-12 REVIEW Unneeded variable Link: https://lore.kernel.org/r/20210831114058.17817-1-lv.ruyi@zte.com.cn Reported-by: Zeal Robot Reviewed-by: James Smart Signed-off-by: Chi Minghao Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_scsi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 63d8ac9f68a7..befdf864c43b 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1495,7 +1495,6 @@ static int lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, uint8_t *txop, uint8_t *rxop) { - uint8_t ret = 0; if (sc->prot_flags & SCSI_PROT_IP_CHECKSUM) { switch (scsi_get_prot_op(sc)) { @@ -1548,7 +1547,7 @@ lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, } } - return ret; + return 0; } #endif -- cgit From 65ef27f7798b57138351d28fd2f61f2afa164400 Mon Sep 17 00:00:00 2001 From: ChanWoo Lee Date: Wed, 1 Sep 2021 11:56:17 +0900 Subject: scsi: ufs: ufshpb: Remove unused parameters The following parameters are not used in the function. Remove them. *func(): ufshpb_set_hpb_read_to_upiu -> struct ufshpb_lu *hpb -> u32 lpn Link: https://lore.kernel.org/r/20210901025617.31174-1-cw9316.lee@samsung.com Reviewed-by: Daejun Park Reviewed-by: Bart Van Assche Signed-off-by: ChanWoo Lee Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshpb.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c index 02fb51ae8b25..589af5f6b940 100644 --- a/drivers/scsi/ufs/ufshpb.c +++ b/drivers/scsi/ufs/ufshpb.c @@ -333,9 +333,8 @@ ufshpb_get_pos_from_lpn(struct ufshpb_lu *hpb, unsigned long lpn, int *rgn_idx, } static void -ufshpb_set_hpb_read_to_upiu(struct ufs_hba *hba, struct ufshpb_lu *hpb, - struct ufshcd_lrb *lrbp, u32 lpn, __be64 ppn, - u8 transfer_len, int read_id) +ufshpb_set_hpb_read_to_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp, + __be64 ppn, u8 transfer_len, int read_id) { unsigned char *cdb = lrbp->cmd->cmnd; __be64 ppn_tmp = ppn; @@ -703,8 +702,7 @@ int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) } } - ufshpb_set_hpb_read_to_upiu(hba, hpb, lrbp, lpn, ppn, transfer_len, - read_id); + ufshpb_set_hpb_read_to_upiu(hba, lrbp, ppn, transfer_len, read_id); hpb->stats.hit_cnt++; return 0; -- cgit From 4e28550829258f7dab97383acaa477bd724c0ff4 Mon Sep 17 00:00:00 2001 From: Baokun Li Date: Wed, 1 Sep 2021 16:53:36 +0800 Subject: scsi: iscsi: Adjust iface sysfs attr detection ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call into the driver, we might not match and return that we don't want attr visible in sysfs. Found in code review. Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection") Reviewed-by: Lee Duncan Signed-off-by: Baokun Li Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_iscsi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index d8b05d8b5470..922e4c7bd88e 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -441,9 +441,7 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, struct iscsi_transport *t = iface->transport; int param = -1; - if (attr == &dev_attr_iface_enabled.attr) - param = ISCSI_NET_PARAM_IFACE_ENABLE; - else if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr) + if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr) param = ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO; else if (attr == &dev_attr_iface_header_digest.attr) param = ISCSI_IFACE_PARAM_HDRDGST_EN; @@ -483,7 +481,9 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj, if (param != -1) return t->attr_is_visible(ISCSI_IFACE_PARAM, param); - if (attr == &dev_attr_iface_vlan_id.attr) + if (attr == &dev_attr_iface_enabled.attr) + param = ISCSI_NET_PARAM_IFACE_ENABLE; + else if (attr == &dev_attr_iface_vlan_id.attr) param = ISCSI_NET_PARAM_VLAN_ID; else if (attr == &dev_attr_iface_vlan_priority.attr) param = ISCSI_NET_PARAM_VLAN_PRIORITY; -- cgit From e4953a93104c1fb1ef7989541f9867cc276467f9 Mon Sep 17 00:00:00 2001 From: Sreekanth Reddy Date: Wed, 1 Sep 2021 20:55:42 +0530 Subject: scsi: mpt3sas: Call cpu_relax() before calling udelay() Call cpu_relax() while waiting for the current blk-mq polling instance to complete. Link: https://lore.kernel.org/r/20210901152542.27866-1-sreekanth.reddy@broadcom.com Reviewed-by: Bart Van Assche Signed-off-by: Sreekanth Reddy Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 6c82435bc9cc..27eb652b564f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -1582,8 +1582,10 @@ mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc) * wait for current poll to complete. */ for (qid = 0; qid < iopoll_q_count; qid++) { - while (atomic_read(&ioc->io_uring_poll_queues[qid].busy)) + while (atomic_read(&ioc->io_uring_poll_queues[qid].busy)) { + cpu_relax(); udelay(500); + } } } -- cgit From 265dfe8ebbabae7959060bd1c3f75c2473b697ed Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 6 Sep 2021 17:01:12 +0800 Subject: scsi: sd: Free scsi_disk device via put_device() After a device is initialized via device_initialize() it should be freed via put_device(). sd_probe() currently gets this wrong, fix it up. Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com Reviewed-by: Bart Van Assche Reviewed-by: Christoph Hellwig Signed-off-by: Ming Lei Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index cbd9999f93a6..a8039beb5a02 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3401,15 +3401,16 @@ static int sd_probe(struct device *dev) } device_initialize(&sdkp->dev); - sdkp->dev.parent = dev; + sdkp->dev.parent = get_device(dev); sdkp->dev.class = &sd_disk_class; dev_set_name(&sdkp->dev, "%s", dev_name(dev)); error = device_add(&sdkp->dev); - if (error) - goto out_free_index; + if (error) { + put_device(&sdkp->dev); + goto out; + } - get_device(dev); dev_set_drvdata(dev, sdkp); gd->major = sd_major((index & 0xf0) >> 4); -- cgit From 7215e909814fed7cda33c954943a4050d8348204 Mon Sep 17 00:00:00 2001 From: Naohiro Aota Date: Mon, 6 Sep 2021 23:06:42 +0900 Subject: scsi: sd_zbc: Ensure buffer size is aligned to SECTOR_SIZE Reporting zones on a SCSI device sometimes fail with the following error: [76248.516390] ata16.00: invalid transfer count 131328 [76248.523618] sd 15:0:0:0: [sda] REPORT ZONES start lba 536870912 failed The error (from drivers/ata/libata-scsi.c:ata_scsi_zbc_in_xlat()) indicates that buffer size is not aligned to SECTOR_SIZE. This happens when the __vmalloc() failed. Consider we are reporting 4096 zones, then we will have "bufsize = roundup((4096 + 1) * 64, SECTOR_SIZE)" = (513 * 512) = 262656. Then, __vmalloc() failure halves the bufsize to 131328, which is no longer aligned to SECTOR_SIZE. Use rounddown() to ensure the size is always aligned to SECTOR_SIZE and fix the comment as well. Link: https://lore.kernel.org/r/20210906140642.2267569-1-naohiro.aota@wdc.com Fixes: 23a50861adda ("scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()") Cc: stable@vger.kernel.org # 5.5+ Reviewed-by: Johannes Thumshirn Reviewed-by: Damien Le Moal Reviewed-by: Himanshu Madhani Signed-off-by: Naohiro Aota Signed-off-by: Martin K. Petersen --- drivers/scsi/sd_zbc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index b9757f24b0d6..8197d31a81f9 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -154,8 +154,8 @@ static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp, /* * Report zone buffer size should be at most 64B times the number of - * zones requested plus the 64B reply header, but should be at least - * SECTOR_SIZE for ATA devices. + * zones requested plus the 64B reply header, but should be aligned + * to SECTOR_SIZE for ATA devices. * Make sure that this size does not exceed the hardware capabilities. * Furthermore, since the report zone command cannot be split, make * sure that the allocated buffer can always be mapped by limiting the @@ -174,7 +174,7 @@ static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp, *buflen = bufsize; return buf; } - bufsize >>= 1; + bufsize = rounddown(bufsize >> 1, SECTOR_SIZE); } return NULL; -- cgit From ef7ae7f746e95c6fa4ec2bcfacb949c36263da78 Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Mon, 6 Sep 2021 17:18:09 +0200 Subject: scsi: target: Fix the pgr/alua_support_store functions Commit 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") introduced support for changeable alua_support and pgr_support target attributes. These can only be changed if the backstore is user-backed, otherwise the kernel returns -EINVAL. This triggers a warning in the targetcli/rtslib code when performing a target restore that includes non-userbacked backstores: # targetctl restore Storage Object block/storage1: Cannot set attribute alua_support: [Errno 22] Invalid argument, skipped Storage Object block/storage1: Cannot set attribute pgr_support: [Errno 22] Invalid argument, skipped Fix this warning by returning an error code only if we are really going to flip the PGR/ALUA bit in the transport_flags field, otherwise we will do nothing and return success. Return ENOSYS instead of EINVAL if the pgr/alua attributes can not be changed, this way it will be possible for userspace to understand if the operation failed because an invalid value has been passed to strtobool() or because the attributes are fixed. Fixes: 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") Link: https://lore.kernel.org/r/20210906151809.52811-1-mlombard@redhat.com Reviewed-by: Bodo Stroesser Signed-off-by: Maurizio Lombardi Signed-off-by: Martin K. Petersen --- drivers/target/target_core_configfs.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index 102ec644bc8a..023bd4516a68 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -1110,20 +1110,24 @@ static ssize_t alua_support_store(struct config_item *item, { struct se_dev_attrib *da = to_attrib(item); struct se_device *dev = da->da_dev; - bool flag; + bool flag, oldflag; int ret; + ret = strtobool(page, &flag); + if (ret < 0) + return ret; + + oldflag = !(dev->transport_flags & TRANSPORT_FLAG_PASSTHROUGH_ALUA); + if (flag == oldflag) + return count; + if (!(dev->transport->transport_flags_changeable & TRANSPORT_FLAG_PASSTHROUGH_ALUA)) { pr_err("dev[%p]: Unable to change SE Device alua_support:" " alua_support has fixed value\n", dev); - return -EINVAL; + return -ENOSYS; } - ret = strtobool(page, &flag); - if (ret < 0) - return ret; - if (flag) dev->transport_flags &= ~TRANSPORT_FLAG_PASSTHROUGH_ALUA; else @@ -1145,20 +1149,24 @@ static ssize_t pgr_support_store(struct config_item *item, { struct se_dev_attrib *da = to_attrib(item); struct se_device *dev = da->da_dev; - bool flag; + bool flag, oldflag; int ret; + ret = strtobool(page, &flag); + if (ret < 0) + return ret; + + oldflag = !(dev->transport_flags & TRANSPORT_FLAG_PASSTHROUGH_PGR); + if (flag == oldflag) + return count; + if (!(dev->transport->transport_flags_changeable & TRANSPORT_FLAG_PASSTHROUGH_PGR)) { pr_err("dev[%p]: Unable to change SE Device pgr_support:" " pgr_support has fixed value\n", dev); - return -EINVAL; + return -ENOSYS; } - ret = strtobool(page, &flag); - if (ret < 0) - return ret; - if (flag) dev->transport_flags &= ~TRANSPORT_FLAG_PASSTHROUGH_PGR; else -- cgit From 450907424d9ebcc28fab42a065c3cddce49ee97d Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 7 Sep 2021 09:52:25 -0700 Subject: scsi: elx: efct: Do not hold lock while calling fc_vport_terminate() Smatch checker reported the following error: drivers/base/power/sysfs.c:833 dpm_sysfs_remove() warn: sleeping in atomic context With a calling sequence of: efct_lio_npiv_drop_nport() <- disables preempt -> fc_vport_terminate() -> device_del() -> dpm_sysfs_remove() Issue is efct_lio_npiv_drop_nport() is making the fc_vport_terminate() call while holding a lock w/ ipl raised. It is unnecessary to hold the lock over this call, shift where the lock is taken. Link: https://lore.kernel.org/r/20210907165225.10821-1-jsmart2021@gmail.com Reported-by: Dan Carpenter Co-developed-by: Ram Vegesna Signed-off-by: Ram Vegesna Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/elx/efct/efct_lio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/elx/efct/efct_lio.c b/drivers/scsi/elx/efct/efct_lio.c index bb3b460dc0bc..4d73e92909ab 100644 --- a/drivers/scsi/elx/efct/efct_lio.c +++ b/drivers/scsi/elx/efct/efct_lio.c @@ -880,11 +880,11 @@ efct_lio_npiv_drop_nport(struct se_wwn *wwn) struct efct *efct = lio_vport->efct; unsigned long flags = 0; - spin_lock_irqsave(&efct->tgt_efct.efct_lio_lock, flags); - if (lio_vport->fc_vport) fc_vport_terminate(lio_vport->fc_vport); + spin_lock_irqsave(&efct->tgt_efct.efct_lio_lock, flags); + list_for_each_entry_safe(vport, next_vport, &efct->tgt_efct.vport_list, list_entry) { if (vport->lio_vport == lio_vport) { -- cgit From 1f97c29beee774e407839768439b7f51831c3ea1 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 7 Sep 2021 23:00:44 +0200 Subject: scsi: ncr53c8xx: Remove unused retrieve_from_waiting_list() function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Drop retrieve_from_waiting_list() to avoid this warning: drivers/scsi/ncr53c8xx.c:8000:26: warning: ‘retrieve_from_waiting_list’ defined but not used [-Wunused-function] Link: https://lore.kernel.org/r/YTfS/LH5vCN6afDW@ls3530 Fixes: 1c22e327545c ("scsi: ncr53c8xx: Remove unused code") Reviewed-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: Helge Deller Signed-off-by: Martin K. Petersen --- drivers/scsi/ncr53c8xx.c | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 7a4f5d4dd670..2b8c6fa5e775 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -1939,11 +1939,8 @@ static void ncr_start_next_ccb (struct ncb *np, struct lcb * lp, int maxn); static void ncr_put_start_queue(struct ncb *np, struct ccb *cp); static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd); -static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd); static void process_waiting_list(struct ncb *np, int sts); -#define remove_from_waiting_list(np, cmd) \ - retrieve_from_waiting_list(1, (np), (cmd)) #define requeue_waiting_list(np) process_waiting_list((np), DID_OK) #define reset_waiting_list(np) process_waiting_list((np), DID_RESET) @@ -7997,26 +7994,6 @@ static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd) } } -static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd) -{ - struct scsi_cmnd **pcmd = &np->waiting_list; - - while (*pcmd) { - if (cmd == *pcmd) { - if (to_remove) { - *pcmd = (struct scsi_cmnd *) cmd->next_wcmd; - cmd->next_wcmd = NULL; - } -#ifdef DEBUG_WAITING_LIST - printk("%s: cmd %lx retrieved from waiting list\n", ncr_name(np), (u_long) cmd); -#endif - return cmd; - } - pcmd = (struct scsi_cmnd **) &(*pcmd)->next_wcmd; - } - return NULL; -} - static void process_waiting_list(struct ncb *np, int sts) { struct scsi_cmnd *waiting_list, *wcmd; -- cgit From 17dfd54d391ea9f8d136fb137962987cb2c6444c Mon Sep 17 00:00:00 2001 From: jing yangyang Date: Thu, 19 Aug 2021 20:08:05 -0700 Subject: scsi: megaraid: Fix Coccinelle warning WARNING !A || A && B is equivalent to !A || B This issue was detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20210820030805.12383-1-jing.yangyang@zte.com.cn Reported-by: Zeal Robot Acked-by: Sumit Saxena Signed-off-by: jing yangyang Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_base.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index e4298bf4a482..17c87ac8bb51 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -8773,8 +8773,7 @@ int megasas_update_device_list(struct megasas_instance *instance, if (event_type & SCAN_VD_CHANNEL) { if (!instance->requestorId || - (instance->requestorId && - megasas_get_ld_vf_affiliation(instance, 0))) { + megasas_get_ld_vf_affiliation(instance, 0)) { dcmd_ret = megasas_ld_list_query(instance, MR_LD_QUERY_TYPE_EXPOSED_TO_HOST); if (dcmd_ret != DCMD_SUCCESS) -- cgit From fc13fc07490982c89f5d9d8d671ec29a39cddc85 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 3 Sep 2021 08:11:39 -0600 Subject: scsi: Remove SCSI CDROM MAINTAINERS entry There's little point in keeping this one separately maintained these days, so just remove the entry and it'll fall under the SCSI subsystem where it belongs. Link: https://lore.kernel.org/r/c5e12bd1-10de-634c-d6b3-dac79ed01af5@kernel.dk Signed-off-by: Jens Axboe Signed-off-by: Martin K. Petersen --- MAINTAINERS | 7 ------- 1 file changed, 7 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..fd12a39f92ef 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16650,13 +16650,6 @@ M: Lubomir Rintel S: Supported F: drivers/char/pcmcia/scr24x_cs.c -SCSI CDROM DRIVER -M: Jens Axboe -L: linux-scsi@vger.kernel.org -S: Maintained -W: http://www.kernel.dk -F: drivers/scsi/sr* - SCSI RDMA PROTOCOL (SRP) INITIATOR M: Bart Van Assche L: linux-rdma@vger.kernel.org -- cgit From e699a4e1d37314eb842ba9de19a7ccee7f75da10 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 26 Aug 2021 12:57:14 +0100 Subject: scsi: sr: Fix spelling mistake "does'nt" -> "doesn't" There is a spelling mistake in a literal string. Fix it. Link: https://lore.kernel.org/r/20210826115714.11844-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen --- drivers/scsi/sr_ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index 79d9aa2df528..ddd00efc4882 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -523,7 +523,7 @@ static int sr_read_sector(Scsi_CD *cd, int lba, int blksize, unsigned char *dest return rc; cd->readcd_known = 0; sr_printk(KERN_INFO, cd, - "CDROM does'nt support READ CD (0xbe) command\n"); + "CDROM doesn't support READ CD (0xbe) command\n"); /* fall & retry the other way */ } /* ... if this fails, we switch the blocksize using MODE SELECT */ -- cgit From 655a68b2203e44912afe462dff9d83d68ac88333 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 2 Sep 2021 23:36:43 +0100 Subject: scsi: megaraid: Clean up some inconsistent indenting There are a few statements where the indentation is not correct, clean these up. Link: https://lore.kernel.org/r/20210902223643.56979-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 17c87ac8bb51..39d8754e63ac 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -1916,7 +1916,7 @@ void megasas_set_dynamic_target_properties(struct scsi_device *sdev, raid = MR_LdRaidGet(ld, local_map_ptr); if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER) - blk_queue_update_dma_alignment(sdev->request_queue, 0x7); + blk_queue_update_dma_alignment(sdev->request_queue, 0x7); mr_device_priv_data->is_tm_capable = raid->capability.tmCapable; @@ -8033,7 +8033,7 @@ skip_firing_dcmds: if (instance->adapter_type != MFI_SERIES) { megasas_release_fusion(instance); - pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + + pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)); for (i = 0; i < 2 ; i++) { -- cgit From 04c260bdaeede8c703bddc21099e4da96f2909e2 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 2 Sep 2021 23:42:15 +0100 Subject: scsi: mpt3sas: Clean up some inconsistent indenting There are a couple of statements where the indentation is not correct, clean these up. Remove a redundant break statement. Link: https://lore.kernel.org/r/20210902224215.57286-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 770b241d7bb2..1b79f01f03a4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -2178,7 +2178,7 @@ mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type, mpt3sas_check_cmd_timeout(ioc, ioc->ctl_cmds.status, mpi_request, sizeof(Mpi2DiagReleaseRequest_t)/4, reset_needed); - *issue_reset = reset_needed; + *issue_reset = reset_needed; rc = -EFAULT; goto out; } diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 2f82b1e629af..d383d4a03436 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -10749,8 +10749,7 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event) case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST: _scsih_pcie_topology_change_event(ioc, fw_event); ioc->current_event = NULL; - return; - break; + return; } out: fw_event_work_put(fw_event); -- cgit From 1cbc9ad3eecd492be33b727b4606ae75bc880676 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 31 Aug 2021 17:53:17 +0300 Subject: scsi: ufs: ufs-pci: Fix Intel LKF link stability Intel LKF can experience link errors. Make fixes to increase link stability, especially when switching to high speed modes. Link: https://lore.kernel.org/r/20210831145317.26306-1-adrian.hunter@intel.com Fixes: b2c57925df1f ("scsi: ufs: ufs-pci: Add support for Intel LKF") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd-pci.c | 78 +++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/ufs/ufshcd.c | 3 +- drivers/scsi/ufs/ufshcd.h | 1 + 3 files changed, 81 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c index b3bcc5c882da..149c1aa09103 100644 --- a/drivers/scsi/ufs/ufshcd-pci.c +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -128,6 +128,81 @@ static int ufs_intel_link_startup_notify(struct ufs_hba *hba, return err; } +static int ufs_intel_set_lanes(struct ufs_hba *hba, u32 lanes) +{ + struct ufs_pa_layer_attr pwr_info = hba->pwr_info; + int ret; + + pwr_info.lane_rx = lanes; + pwr_info.lane_tx = lanes; + ret = ufshcd_config_pwr_mode(hba, &pwr_info); + if (ret) + dev_err(hba->dev, "%s: Setting %u lanes, err = %d\n", + __func__, lanes, ret); + return ret; +} + +static int ufs_intel_lkf_pwr_change_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status, + struct ufs_pa_layer_attr *dev_max_params, + struct ufs_pa_layer_attr *dev_req_params) +{ + int err = 0; + + switch (status) { + case PRE_CHANGE: + if (ufshcd_is_hs_mode(dev_max_params) && + (hba->pwr_info.lane_rx != 2 || hba->pwr_info.lane_tx != 2)) + ufs_intel_set_lanes(hba, 2); + memcpy(dev_req_params, dev_max_params, sizeof(*dev_req_params)); + break; + case POST_CHANGE: + if (ufshcd_is_hs_mode(dev_req_params)) { + u32 peer_granularity; + + usleep_range(1000, 1250); + err = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_GRANULARITY), + &peer_granularity); + } + break; + default: + break; + } + + return err; +} + +static int ufs_intel_lkf_apply_dev_quirks(struct ufs_hba *hba) +{ + u32 granularity, peer_granularity; + u32 pa_tactivate, peer_pa_tactivate; + int ret; + + ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_GRANULARITY), &granularity); + if (ret) + goto out; + + ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_GRANULARITY), &peer_granularity); + if (ret) + goto out; + + ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_TACTIVATE), &pa_tactivate); + if (ret) + goto out; + + ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_TACTIVATE), &peer_pa_tactivate); + if (ret) + goto out; + + if (granularity == peer_granularity) { + u32 new_peer_pa_tactivate = pa_tactivate + 2; + + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(PA_TACTIVATE), new_peer_pa_tactivate); + } +out: + return ret; +} + #define INTEL_ACTIVELTR 0x804 #define INTEL_IDLELTR 0x808 @@ -351,6 +426,7 @@ static int ufs_intel_lkf_init(struct ufs_hba *hba) struct ufs_host *ufs_host; int err; + hba->nop_out_timeout = 200; hba->quirks |= UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8; hba->caps |= UFSHCD_CAP_CRYPTO; err = ufs_intel_common_init(hba); @@ -381,6 +457,8 @@ static struct ufs_hba_variant_ops ufs_intel_lkf_hba_vops = { .exit = ufs_intel_common_exit, .hce_enable_notify = ufs_intel_hce_enable_notify, .link_startup_notify = ufs_intel_link_startup_notify, + .pwr_change_notify = ufs_intel_lkf_pwr_change_notify, + .apply_dev_quirks = ufs_intel_lkf_apply_dev_quirks, .resume = ufs_intel_resume, .device_reset = ufs_intel_device_reset, }; diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 3841ab49f556..67889d74761c 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -4776,7 +4776,7 @@ static int ufshcd_verify_dev_init(struct ufs_hba *hba) mutex_lock(&hba->dev_cmd.lock); for (retries = NOP_OUT_RETRIES; retries > 0; retries--) { err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_NOP, - NOP_OUT_TIMEOUT); + hba->nop_out_timeout); if (!err || err == -ETIMEDOUT) break; @@ -9483,6 +9483,7 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) hba->host = host; hba->dev = dev; hba->dev_ref_clk_freq = REF_CLK_FREQ_INVAL; + hba->nop_out_timeout = NOP_OUT_TIMEOUT; INIT_LIST_HEAD(&hba->clk_list_head); spin_lock_init(&hba->outstanding_lock); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 52ea6f350b18..4723f27a55d1 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -858,6 +858,7 @@ struct ufs_hba { /* Device management request data */ struct ufs_dev_cmd dev_cmd; ktime_t last_dme_cmd_tstamp; + int nop_out_timeout; /* Keeps information of the UFS device connected to this host */ struct ufs_dev_info dev_info; -- cgit From 4521428c48118b0f5f7a637ce7dedd76c29bcdaa Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sat, 11 Sep 2021 14:11:59 +0200 Subject: scsi: sd: Make sd_spinup_disk() less noisy sd_spinup_disk() is a little bit noisy after commit 848ade90ba9c ("scsi: sd: Do not exit sd_spinup_disk() quietly"): scsi 0:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Media removed, stopped polling sd 0:0:0:0: [sda] Media removed, stopped polling sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:0: [sda] Media removed, stopped polling There's not really a benefit in printing the same message multiple times. Therefore print it only if media_present was previously set. Link: https://lore.kernel.org/r/a2d0a249-6035-9697-626a-e14ec50ef6ee@gmail.com Reviewed-by: Bart Van Assche Signed-off-by: Heiner Kallweit Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index a8039beb5a02..523bf2fdc253 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2124,6 +2124,8 @@ sd_spinup_disk(struct scsi_disk *sdkp) retries = 0; do { + bool media_was_present = sdkp->media_present; + cmd[0] = TEST_UNIT_READY; memset((void *) &cmd[1], 0, 9); @@ -2138,7 +2140,8 @@ sd_spinup_disk(struct scsi_disk *sdkp) * with any more polling. */ if (media_not_present(sdkp, &sshdr)) { - sd_printk(KERN_NOTICE, sdkp, "Media removed, stopped polling\n"); + if (media_was_present) + sd_printk(KERN_NOTICE, sdkp, "Media removed, stopped polling\n"); return; } -- cgit From 1a0db7744e453844aa2db3f2959aea4a378025ea Mon Sep 17 00:00:00 2001 From: Zenghui Yu Date: Sat, 11 Sep 2021 18:53:06 +0800 Subject: scsi: bsg: Fix device unregistration device_initialize() is used to take a refcount on the device. However, put_device() is not called during device teardown. This leads to a leak of private data of the driver core, dev_name(), etc. This is reported by kmemleak at boot time if we compile kernel with DEBUG_TEST_DRIVER_REMOVE. Fix memory leaks during unregistration and implement a release function. Link: https://lore.kernel.org/r/20210911105306.1511-1-yuzenghui@huawei.com Fixes: ead09dd3aed5 ("scsi: bsg: Simplify device registration") Reviewed-by: Johan Hovold Signed-off-by: Zenghui Yu Signed-off-by: Martin K. Petersen --- block/bsg.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/block/bsg.c b/block/bsg.c index 351095193788..882f56bff14f 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -165,13 +165,20 @@ static const struct file_operations bsg_fops = { .llseek = default_llseek, }; +static void bsg_device_release(struct device *dev) +{ + struct bsg_device *bd = container_of(dev, struct bsg_device, device); + + ida_simple_remove(&bsg_minor_ida, MINOR(bd->device.devt)); + kfree(bd); +} + void bsg_unregister_queue(struct bsg_device *bd) { if (bd->queue->kobj.sd) sysfs_remove_link(&bd->queue->kobj, "bsg"); cdev_device_del(&bd->cdev, &bd->device); - ida_simple_remove(&bsg_minor_ida, MINOR(bd->device.devt)); - kfree(bd); + put_device(&bd->device); } EXPORT_SYMBOL_GPL(bsg_unregister_queue); @@ -193,11 +200,13 @@ struct bsg_device *bsg_register_queue(struct request_queue *q, if (ret < 0) { if (ret == -ENOSPC) dev_err(parent, "bsg: too many bsg devices\n"); - goto out_kfree; + kfree(bd); + return ERR_PTR(ret); } bd->device.devt = MKDEV(bsg_major, ret); bd->device.class = bsg_class; bd->device.parent = parent; + bd->device.release = bsg_device_release; dev_set_name(&bd->device, "%s", name); device_initialize(&bd->device); @@ -205,7 +214,7 @@ struct bsg_device *bsg_register_queue(struct request_queue *q, bd->cdev.owner = THIS_MODULE; ret = cdev_device_add(&bd->cdev, &bd->device); if (ret) - goto out_ida_remove; + goto out_put_device; if (q->kobj.sd) { ret = sysfs_create_link(&q->kobj, &bd->device.kobj, "bsg"); @@ -217,10 +226,8 @@ struct bsg_device *bsg_register_queue(struct request_queue *q, out_device_del: cdev_device_del(&bd->cdev, &bd->device); -out_ida_remove: - ida_simple_remove(&bsg_minor_ida, MINOR(bd->device.devt)); -out_kfree: - kfree(bd); +out_put_device: + put_device(&bd->device); return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(bsg_register_queue); -- cgit From b564171ade70570b7f335fa8ed17adb28409e3ac Mon Sep 17 00:00:00 2001 From: Li Li Date: Fri, 10 Sep 2021 09:42:10 -0700 Subject: binder: fix freeze race Currently cgroup freezer is used to freeze the application threads, and BINDER_FREEZE is used to freeze the corresponding binder interface. There's already a mechanism in ioctl(BINDER_FREEZE) to wait for any existing transactions to drain out before actually freezing the binder interface. But freezing an app requires 2 steps, freezing the binder interface with ioctl(BINDER_FREEZE) and then freezing the application main threads with cgroupfs. This is not an atomic operation. The following race issue might happen. 1) Binder interface is frozen by ioctl(BINDER_FREEZE); 2) Main thread A initiates a new sync binder transaction to process B; 3) Main thread A is frozen by "echo 1 > cgroup.freeze"; 4) The response from process B reaches the frozen thread, which will unexpectedly fail. This patch provides a mechanism to check if there's any new pending transaction happening between ioctl(BINDER_FREEZE) and freezing the main thread. If there's any, the main thread freezing operation can be rolled back to finish the pending transaction. Furthermore, the response might reach the binder driver before the rollback actually happens. That will still cause failed transaction. As the other process doesn't wait for another response of the response, the response transaction failure can be fixed by treating the response transaction like an oneway/async one, allowing it to reach the frozen thread. And it will be consumed when the thread gets unfrozen later. NOTE: This patch reuses the existing definition of struct binder_frozen_status_info but expands the bit assignments of __u32 member sync_recv. To ensure backward compatibility, bit 0 of sync_recv still indicates there's an outstanding sync binder transaction. This patch adds new information to bit 1 of sync_recv, indicating the binder transaction happens exactly when there's a race. If an existing userspace app runs on a new kernel, a sync binder call will set bit 0 of sync_recv so ioctl(BINDER_GET_FROZEN_INFO) still return the expected value (true). The app just doesn't check bit 1 intentionally so it doesn't have the ability to tell if there's a race. This behavior is aligned with what happens on an old kernel which doesn't set bit 1 at all. A new userspace app can 1) check bit 0 to know if there's a sync binder transaction happened when being frozen - same as before; and 2) check bit 1 to know if that sync binder transaction happened exactly when there's a race - a new information for rollback decision. the same time, confirmed the pending transactions succeeded. Fixes: 432ff1e91694 ("binder: BINDER_FREEZE ioctl") Acked-by: Todd Kjos Cc: stable Signed-off-by: Li Li Test: stress test with apps being frozen and initiating binder calls at Link: https://lore.kernel.org/r/20210910164210.2282716-2-dualli@chromium.org Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 35 +++++++++++++++++++++++++++++------ drivers/android/binder_internal.h | 2 ++ include/uapi/linux/android/binder.h | 7 +++++++ 3 files changed, 38 insertions(+), 6 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index d9030cb6b1e4..1a68c2f590cf 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -3038,9 +3038,8 @@ static void binder_transaction(struct binder_proc *proc, if (reply) { binder_enqueue_thread_work(thread, tcomplete); binder_inner_proc_lock(target_proc); - if (target_thread->is_dead || target_proc->is_frozen) { - return_error = target_thread->is_dead ? - BR_DEAD_REPLY : BR_FROZEN_REPLY; + if (target_thread->is_dead) { + return_error = BR_DEAD_REPLY; binder_inner_proc_unlock(target_proc); goto err_dead_proc_or_thread; } @@ -4648,6 +4647,22 @@ static int binder_ioctl_get_node_debug_info(struct binder_proc *proc, return 0; } +static bool binder_txns_pending_ilocked(struct binder_proc *proc) +{ + struct rb_node *n; + struct binder_thread *thread; + + if (proc->outstanding_txns > 0) + return true; + + for (n = rb_first(&proc->threads); n; n = rb_next(n)) { + thread = rb_entry(n, struct binder_thread, rb_node); + if (thread->transaction_stack) + return true; + } + return false; +} + static int binder_ioctl_freeze(struct binder_freeze_info *info, struct binder_proc *target_proc) { @@ -4679,8 +4694,13 @@ static int binder_ioctl_freeze(struct binder_freeze_info *info, (!target_proc->outstanding_txns), msecs_to_jiffies(info->timeout_ms)); - if (!ret && target_proc->outstanding_txns) - ret = -EAGAIN; + /* Check pending transactions that wait for reply */ + if (ret >= 0) { + binder_inner_proc_lock(target_proc); + if (binder_txns_pending_ilocked(target_proc)) + ret = -EAGAIN; + binder_inner_proc_unlock(target_proc); + } if (ret < 0) { binder_inner_proc_lock(target_proc); @@ -4696,6 +4716,7 @@ static int binder_ioctl_get_freezer_info( { struct binder_proc *target_proc; bool found = false; + __u32 txns_pending; info->sync_recv = 0; info->async_recv = 0; @@ -4705,7 +4726,9 @@ static int binder_ioctl_get_freezer_info( if (target_proc->pid == info->pid) { found = true; binder_inner_proc_lock(target_proc); - info->sync_recv |= target_proc->sync_recv; + txns_pending = binder_txns_pending_ilocked(target_proc); + info->sync_recv |= target_proc->sync_recv | + (txns_pending << 1); info->async_recv |= target_proc->async_recv; binder_inner_proc_unlock(target_proc); } diff --git a/drivers/android/binder_internal.h b/drivers/android/binder_internal.h index 810c0b84d3f8..402c4d4362a8 100644 --- a/drivers/android/binder_internal.h +++ b/drivers/android/binder_internal.h @@ -378,6 +378,8 @@ struct binder_ref { * binder transactions * (protected by @inner_lock) * @sync_recv: process received sync transactions since last frozen + * bit 0: received sync transaction after being frozen + * bit 1: new pending sync transaction during freezing * (protected by @inner_lock) * @async_recv: process received async transactions since last frozen * (protected by @inner_lock) diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h index 20e435fe657a..3246f2c74696 100644 --- a/include/uapi/linux/android/binder.h +++ b/include/uapi/linux/android/binder.h @@ -225,7 +225,14 @@ struct binder_freeze_info { struct binder_frozen_status_info { __u32 pid; + + /* process received sync transactions since last frozen + * bit 0: received sync transaction after being frozen + * bit 1: new pending sync transaction during freezing + */ __u32 sync_recv; + + /* process received async transactions since last frozen */ __u32 async_recv; }; -- cgit From 5fdb55c1ac9585eb23bb2541d5819224429e103d Mon Sep 17 00:00:00 2001 From: Todd Kjos Date: Mon, 30 Aug 2021 12:51:46 -0700 Subject: binder: make sure fd closes complete During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object cleanup may close 1 or more fds. The close operations are completed using the task work mechanism -- which means the thread needs to return to userspace or the file object may never be dereferenced -- which can lead to hung processes. Force the binder thread back to userspace if an fd is closed during BC_FREE_BUFFER handling. Fixes: 80cd795630d6 ("binder: fix use-after-free due to ksys_close() during fdget()") Cc: stable Reviewed-by: Martijn Coenen Acked-by: Christian Brauner Signed-off-by: Todd Kjos Link: https://lore.kernel.org/r/20210830195146.587206-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 1a68c2f590cf..9edacc8b9768 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -1852,6 +1852,7 @@ static void binder_deferred_fd_close(int fd) } static void binder_transaction_buffer_release(struct binder_proc *proc, + struct binder_thread *thread, struct binder_buffer *buffer, binder_size_t failed_at, bool is_failure) @@ -2011,8 +2012,16 @@ static void binder_transaction_buffer_release(struct binder_proc *proc, &proc->alloc, &fd, buffer, offset, sizeof(fd)); WARN_ON(err); - if (!err) + if (!err) { binder_deferred_fd_close(fd); + /* + * Need to make sure the thread goes + * back to userspace to complete the + * deferred close + */ + if (thread) + thread->looper_need_return = true; + } } } break; default: @@ -3104,7 +3113,7 @@ err_bad_parent: err_copy_data_failed: binder_free_txn_fixups(t); trace_binder_transaction_failed_buffer_release(t->buffer); - binder_transaction_buffer_release(target_proc, t->buffer, + binder_transaction_buffer_release(target_proc, NULL, t->buffer, buffer_offset, true); if (target_node) binder_dec_node_tmpref(target_node); @@ -3183,7 +3192,9 @@ err_invalid_target_handle: * Cleanup buffer and free it. */ static void -binder_free_buf(struct binder_proc *proc, struct binder_buffer *buffer) +binder_free_buf(struct binder_proc *proc, + struct binder_thread *thread, + struct binder_buffer *buffer) { binder_inner_proc_lock(proc); if (buffer->transaction) { @@ -3211,7 +3222,7 @@ binder_free_buf(struct binder_proc *proc, struct binder_buffer *buffer) binder_node_inner_unlock(buf_node); } trace_binder_transaction_buffer_release(buffer); - binder_transaction_buffer_release(proc, buffer, 0, false); + binder_transaction_buffer_release(proc, thread, buffer, 0, false); binder_alloc_free_buf(&proc->alloc, buffer); } @@ -3413,7 +3424,7 @@ static int binder_thread_write(struct binder_proc *proc, proc->pid, thread->pid, (u64)data_ptr, buffer->debug_id, buffer->transaction ? "active" : "finished"); - binder_free_buf(proc, buffer); + binder_free_buf(proc, thread, buffer); break; } @@ -4106,7 +4117,7 @@ retry: buffer->transaction = NULL; binder_cleanup_transaction(t, "fd fixups failed", BR_FAILED_REPLY); - binder_free_buf(proc, buffer); + binder_free_buf(proc, thread, buffer); binder_debug(BINDER_DEBUG_FAILED_TRANSACTION, "%d:%d %stransaction %d fd fixups failed %d/%d, line %d\n", proc->pid, thread->pid, -- cgit From 7a8aa39d44564703620d937bb54cdea2d003657f Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 13 Sep 2021 17:05:51 +0100 Subject: nvmem: core: Add stubs for nvmem_cell_read_variable_le_u32/64 if !CONFIG_NVMEM When I added nvmem_cell_read_variable_le_u32() and nvmem_cell_read_variable_le_u64() I forgot to add the "static inline" stub functions for when CONFIG_NVMEM wasn't defined. Add them now. This was causing problems with randconfig builds that compiled `drivers/soc/qcom/cpr.c`. Fixes: 6feba6a62c57 ("PM: AVS: qcom-cpr: Use nvmem_cell_read_variable_le_u32()") Fixes: a28e824fb827 ("nvmem: core: Add functions to make number reading easy") Reported-by: kernel test robot Reviewed-by: Bjorn Andersson Signed-off-by: Douglas Anderson Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20210913160551.12907-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- include/linux/nvmem-consumer.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h index 923dada24eb4..c0c0cefc3b92 100644 --- a/include/linux/nvmem-consumer.h +++ b/include/linux/nvmem-consumer.h @@ -150,6 +150,20 @@ static inline int nvmem_cell_read_u64(struct device *dev, return -EOPNOTSUPP; } +static inline int nvmem_cell_read_variable_le_u32(struct device *dev, + const char *cell_id, + u32 *val) +{ + return -EOPNOTSUPP; +} + +static inline int nvmem_cell_read_variable_le_u64(struct device *dev, + const char *cell_id, + u64 *val) +{ + return -EOPNOTSUPP; +} + static inline struct nvmem_device *nvmem_device_get(struct device *dev, const char *name) { -- cgit From 212b5d2d3ed9d7db2702e4805f36a346c3985e1d Mon Sep 17 00:00:00 2001 From: Jian Cai Date: Mon, 13 Sep 2021 10:46:13 -0600 Subject: coresight: syscfg: Fix compiler warning This fixes warnings with -Wimplicit-function-declaration, e.g. drivers/hwtracing/coresight/coresight-syscfg.c:455:15: error: implicit declaration of function 'kzalloc' [-Werror, -Wimplicit-function-declaration] csdev_item = kzalloc(sizeof(struct cscfg_registered_csdev), GFP_KERNEL); Link: https://lore.kernel.org/r/20210830172820.2840433-1-jiancai@google.com Fixes: 85e2414c518a ("coresight: syscfg: Initial coresight system configuration") Reviewed-by: Guenter Roeck Signed-off-by: Jian Cai Signed-off-by: Mathieu Poirier Link: https://lore.kernel.org/r/20210913164613.1675791-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-syscfg.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index fc0760f55c53..43054568430f 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -5,6 +5,7 @@ */ #include +#include #include "coresight-config.h" #include "coresight-etm-perf.h" -- cgit From 92dc0b1f46e12cfabd28d709bb34f7a39431b44f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 6 Sep 2021 14:45:38 +0200 Subject: staging: greybus: uart: fix tty use after free User space can hold a tty open indefinitely and tty drivers must not release the underlying structures until the last user is gone. Switch to using the tty-port reference counter to manage the life time of the greybus tty state to avoid use after free after a disconnect. Fixes: a18e15175708 ("greybus: more uart work") Cc: stable@vger.kernel.org # 4.9 Reviewed-by: Alex Elder Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210906124538.22358-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/greybus/uart.c | 62 ++++++++++++++++++++++-------------------- 1 file changed, 32 insertions(+), 30 deletions(-) diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c index e6d860a9678e..dc4ed0ff1ae2 100644 --- a/drivers/staging/greybus/uart.c +++ b/drivers/staging/greybus/uart.c @@ -761,6 +761,17 @@ out: gbphy_runtime_put_autosuspend(gb_tty->gbphy_dev); } +static void gb_tty_port_destruct(struct tty_port *port) +{ + struct gb_tty *gb_tty = container_of(port, struct gb_tty, port); + + if (gb_tty->minor != GB_NUM_MINORS) + release_minor(gb_tty); + kfifo_free(&gb_tty->write_fifo); + kfree(gb_tty->buffer); + kfree(gb_tty); +} + static const struct tty_operations gb_ops = { .install = gb_tty_install, .open = gb_tty_open, @@ -786,6 +797,7 @@ static const struct tty_port_operations gb_port_ops = { .dtr_rts = gb_tty_dtr_rts, .activate = gb_tty_port_activate, .shutdown = gb_tty_port_shutdown, + .destruct = gb_tty_port_destruct, }; static int gb_uart_probe(struct gbphy_device *gbphy_dev, @@ -798,17 +810,11 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, int retval; int minor; - gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL); - if (!gb_tty) - return -ENOMEM; - connection = gb_connection_create(gbphy_dev->bundle, le16_to_cpu(gbphy_dev->cport_desc->id), gb_uart_request_handler); - if (IS_ERR(connection)) { - retval = PTR_ERR(connection); - goto exit_tty_free; - } + if (IS_ERR(connection)) + return PTR_ERR(connection); max_payload = gb_operation_get_payload_size_max(connection); if (max_payload < sizeof(struct gb_uart_send_data_request)) { @@ -816,13 +822,23 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, goto exit_connection_destroy; } + gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL); + if (!gb_tty) { + retval = -ENOMEM; + goto exit_connection_destroy; + } + + tty_port_init(&gb_tty->port); + gb_tty->port.ops = &gb_port_ops; + gb_tty->minor = GB_NUM_MINORS; + gb_tty->buffer_payload_max = max_payload - sizeof(struct gb_uart_send_data_request); gb_tty->buffer = kzalloc(gb_tty->buffer_payload_max, GFP_KERNEL); if (!gb_tty->buffer) { retval = -ENOMEM; - goto exit_connection_destroy; + goto exit_put_port; } INIT_WORK(&gb_tty->tx_work, gb_uart_tx_write_work); @@ -830,7 +846,7 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE, GFP_KERNEL); if (retval) - goto exit_buf_free; + goto exit_put_port; gb_tty->credits = GB_UART_FIRMWARE_CREDITS; init_completion(&gb_tty->credits_complete); @@ -844,7 +860,7 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, } else { retval = minor; } - goto exit_kfifo_free; + goto exit_put_port; } gb_tty->minor = minor; @@ -853,9 +869,6 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, init_waitqueue_head(&gb_tty->wioctl); mutex_init(&gb_tty->mutex); - tty_port_init(&gb_tty->port); - gb_tty->port.ops = &gb_port_ops; - gb_tty->connection = connection; gb_tty->gbphy_dev = gbphy_dev; gb_connection_set_data(connection, gb_tty); @@ -863,7 +876,7 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, retval = gb_connection_enable_tx(connection); if (retval) - goto exit_release_minor; + goto exit_put_port; send_control(gb_tty, gb_tty->ctrlout); @@ -890,16 +903,10 @@ static int gb_uart_probe(struct gbphy_device *gbphy_dev, exit_connection_disable: gb_connection_disable(connection); -exit_release_minor: - release_minor(gb_tty); -exit_kfifo_free: - kfifo_free(&gb_tty->write_fifo); -exit_buf_free: - kfree(gb_tty->buffer); +exit_put_port: + tty_port_put(&gb_tty->port); exit_connection_destroy: gb_connection_destroy(connection); -exit_tty_free: - kfree(gb_tty); return retval; } @@ -930,15 +937,10 @@ static void gb_uart_remove(struct gbphy_device *gbphy_dev) gb_connection_disable_rx(connection); tty_unregister_device(gb_tty_driver, gb_tty->minor); - /* FIXME - free transmit / receive buffers */ - gb_connection_disable(connection); - tty_port_destroy(&gb_tty->port); gb_connection_destroy(connection); - release_minor(gb_tty); - kfifo_free(&gb_tty->write_fifo); - kfree(gb_tty->buffer); - kfree(gb_tty); + + tty_port_put(&gb_tty->port); } static int gb_tty_init(void) -- cgit From 79e9e30a9292a62d25ab75488d3886108db1eaad Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 3 Sep 2021 00:05:50 -0500 Subject: serial: 8250: 8250_omap: Fix RX_LVL register offset Commit b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") introduced fixup including a register read to RX_LVL, however, we should be using word offset than byte offset since our registers are on 4 byte boundary (port.regshift = 2) for 8250_omap. Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") Cc: stable Cc: Jan Kiszka Cc: Vignesh Raghavendra Signed-off-by: Nishanth Menon Link: https://lore.kernel.org/r/20210903050550.29050-1-nm@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 891fd8345e25..73e5f1dbd075 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -106,7 +106,7 @@ #define UART_OMAP_EFR2_TIMEOUT_BEHAVE BIT(6) /* RX FIFO occupancy indicator */ -#define UART_OMAP_RX_LVL 0x64 +#define UART_OMAP_RX_LVL 0x19 struct omap8250_priv { int line; -- cgit From 74e1eb3b4a1ef2e564b4bdeb6e92afe844e900de Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 11 Sep 2021 15:20:17 +0200 Subject: serial: mvebu-uart: fix driver's tx_empty callback MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Driver's tx_empty callback should signal when the transmit shift register is empty. So when the last character has been sent. STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which happens when the last byte is loaded into transmit shift register. STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift register are empty. So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty() callback function. Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable Signed-off-by: Pali Rohár Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mvebu-uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 231de29a6452..ab226da75f7b 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -163,7 +163,7 @@ static unsigned int mvebu_uart_tx_empty(struct uart_port *port) st = readl(port->membase + UART_STAT); spin_unlock_irqrestore(&port->lock, flags); - return (st & STAT_TX_FIFO_EMP) ? TIOCSER_TEMT : 0; + return (st & STAT_TX_EMP) ? TIOCSER_TEMT : 0; } static unsigned int mvebu_uart_get_mctrl(struct uart_port *port) -- cgit From f81c08f897adafd2ed43f86f00207ff929f0b2eb Mon Sep 17 00:00:00 2001 From: Faizel K B Date: Thu, 2 Sep 2021 17:14:44 +0530 Subject: usb: testusb: Fix for showing the connection speed testusb' application which uses 'usbtest' driver reports 'unknown speed' from the function 'find_testdev'. The variable 'entry->speed' was not updated from the application. The IOCTL mentioned in the FIXME comment can only report whether the connection is low speed or not. Speed is read using the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade. The call is implemented in the function 'handle_testdev' where the file descriptor was availble locally. Sample output is given below where 'high speed' is printed as the connected speed. sudo ./testusb -a high speed /dev/bus/usb/001/011 0 /dev/bus/usb/001/011 test 0, 0.000015 secs /dev/bus/usb/001/011 test 1, 0.194208 secs /dev/bus/usb/001/011 test 2, 0.077289 secs /dev/bus/usb/001/011 test 3, 0.170604 secs /dev/bus/usb/001/011 test 4, 0.108335 secs /dev/bus/usb/001/011 test 5, 2.788076 secs /dev/bus/usb/001/011 test 6, 2.594610 secs /dev/bus/usb/001/011 test 7, 2.905459 secs /dev/bus/usb/001/011 test 8, 2.795193 secs /dev/bus/usb/001/011 test 9, 8.372651 secs /dev/bus/usb/001/011 test 10, 6.919731 secs /dev/bus/usb/001/011 test 11, 16.372687 secs /dev/bus/usb/001/011 test 12, 16.375233 secs /dev/bus/usb/001/011 test 13, 2.977457 secs /dev/bus/usb/001/011 test 14 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 17, 0.148826 secs /dev/bus/usb/001/011 test 18, 0.068718 secs /dev/bus/usb/001/011 test 19, 0.125992 secs /dev/bus/usb/001/011 test 20, 0.127477 secs /dev/bus/usb/001/011 test 21 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 24, 4.133763 secs /dev/bus/usb/001/011 test 27, 2.140066 secs /dev/bus/usb/001/011 test 28, 2.120713 secs /dev/bus/usb/001/011 test 29, 0.507762 secs Signed-off-by: Faizel K B Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com Signed-off-by: Greg Kroah-Hartman --- tools/usb/testusb.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/tools/usb/testusb.c b/tools/usb/testusb.c index ee8208b2f946..69c3ead25313 100644 --- a/tools/usb/testusb.c +++ b/tools/usb/testusb.c @@ -265,12 +265,6 @@ nomem: } entry->ifnum = ifnum; - - /* FIXME update USBDEVFS_CONNECTINFO so it tells about high speed etc */ - - fprintf(stderr, "%s speed\t%s\t%u\n", - speed(entry->speed), entry->name, entry->ifnum); - entry->next = testdevs; testdevs = entry; return 0; @@ -299,6 +293,14 @@ static void *handle_testdev (void *arg) return 0; } + status = ioctl(fd, USBDEVFS_GET_SPEED, NULL); + if (status < 0) + fprintf(stderr, "USBDEVFS_GET_SPEED failed %d\n", status); + else + dev->speed = status; + fprintf(stderr, "%s speed\t%s\t%u\n", + speed(dev->speed), dev->name, dev->ifnum); + restart: for (i = 0; i < TEST_CASES; i++) { if (dev->test != -1 && dev->test != i) -- cgit From f5dfd98a80ff8d50cf4ae2820857d7f5a46cbab9 Mon Sep 17 00:00:00 2001 From: Pavel Hofman Date: Mon, 6 Sep 2021 15:08:22 +0200 Subject: usb: gadget: u_audio: EP-OUT bInterval in fback frequency The patch increases the bitshift in feedback frequency calculation with EP-OUT bInterval value. Tests have revealed that Win10 and OSX UAC2 drivers require the feedback frequency to be based on the actual packet interval instead of on the USB2 microframe. Otherwise they ignore the feedback value. Linux snd-usb-audio driver detects the applied bitshift automatically. Tested-by: Henrik Enquist Signed-off-by: Pavel Hofman Cc: stable Link: https://lore.kernel.org/r/20210906130822.12256-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/u_audio.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index 32ef22857083..ad16163b5ff8 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -96,11 +96,13 @@ static const struct snd_pcm_hardware uac_pcm_hardware = { }; static void u_audio_set_fback_frequency(enum usb_device_speed speed, + struct usb_ep *out_ep, unsigned long long freq, unsigned int pitch, void *buf) { u32 ff = 0; + const struct usb_endpoint_descriptor *ep_desc; /* * Because the pitch base is 1000000, the final divider here @@ -128,8 +130,13 @@ static void u_audio_set_fback_frequency(enum usb_device_speed speed, * byte fromat (that is Q16.16) * * ff = (freq << 16) / 8000 + * + * Win10 and OSX UAC2 drivers require number of samples per packet + * in order to honor the feedback value. + * Linux snd-usb-audio detects the applied bit-shift automatically. */ - freq <<= 4; + ep_desc = out_ep->desc; + freq <<= 4 + (ep_desc->bInterval - 1); } ff = DIV_ROUND_CLOSEST_ULL((freq * pitch), 1953125); @@ -267,7 +274,7 @@ static void u_audio_iso_fback_complete(struct usb_ep *ep, pr_debug("%s: iso_complete status(%d) %d/%d\n", __func__, status, req->actual, req->length); - u_audio_set_fback_frequency(audio_dev->gadget->speed, + u_audio_set_fback_frequency(audio_dev->gadget->speed, audio_dev->out_ep, params->c_srate, prm->pitch, req->buf); @@ -526,7 +533,7 @@ int u_audio_start_capture(struct g_audio *audio_dev) * be meauserd at start of playback */ prm->pitch = 1000000; - u_audio_set_fback_frequency(audio_dev->gadget->speed, + u_audio_set_fback_frequency(audio_dev->gadget->speed, ep, params->c_srate, prm->pitch, req_fback->buf); -- cgit From 17956b53ebff6a490baf580a836cbd3eae94892b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Sep 2021 12:42:21 +0300 Subject: usb: gadget: r8a66597: fix a loop in set_feature() This loop is supposed to loop until if reads something other than CS_IDST or until it times out after 30,000 attempts. But because of the || vs && bug, it will never time out and instead it will loop a minimum of 30,000 times. This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE so it probably doesn't affect regular usage. Fixes: 96fe53ef5498 ("usb: gadget: r8a66597-udc: add support for TEST_MODE") Cc: stable Reviewed-by: Yoshihiro Shimoda Acked-by: Felipe Balbi Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210906094221.GA10957@kili Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/r8a66597-udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index 65cae4883454..38e4d6b505a0 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -1250,7 +1250,7 @@ static void set_feature(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl) do { tmp = r8a66597_read(r8a66597, INTSTS0) & CTSQ; udelay(1); - } while (tmp != CS_IDST || timeout-- > 0); + } while (tmp != CS_IDST && timeout-- > 0); if (tmp == CS_IDST) r8a66597_bset(r8a66597, -- cgit From b69ec50b3e55c4b2a85c8bc46763eaf330605847 Mon Sep 17 00:00:00 2001 From: Pawel Laszczak Date: Tue, 7 Sep 2021 08:26:19 +0200 Subject: usb: cdns3: fix race condition before setting doorbell For DEV_VER_V3 version there exist race condition between clearing ep_sts.EP_STS_TRBERR and setting ep_cmd.EP_CMD_DRDY bit. Setting EP_CMD_DRDY will be ignored by controller when EP_STS_TRBERR is set. So, between these two instructions we have a small time gap in which the EP_STSS_TRBERR can be set. In such case the transfer will not start after setting doorbell. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: # 5.12.x Tested-by: Aswath Govindraju Reviewed-by: Aswath Govindraju Signed-off-by: Pawel Laszczak Link: https://lore.kernel.org/r/20210907062619.34622-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/cdns3/cdns3-gadget.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index 5d8c982019af..1f3b4a142212 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -1100,6 +1100,19 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep, return 0; } +static void cdns3_rearm_drdy_if_needed(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + if (priv_dev->dev_ver < DEV_VER_V3) + return; + + if (readl(&priv_dev->regs->ep_sts) & EP_STS_TRBERR) { + writel(EP_STS_TRBERR, &priv_dev->regs->ep_sts); + writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd); + } +} + /** * cdns3_ep_run_transfer - start transfer on no-default endpoint hardware * @priv_ep: endpoint object @@ -1351,6 +1364,7 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, /*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/ writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts); writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd); + cdns3_rearm_drdy_if_needed(priv_ep); trace_cdns3_doorbell_epx(priv_ep->name, readl(&priv_dev->regs->ep_traddr)); } -- cgit From 856e6e8e0f9300befa87dde09edb578555c99a82 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Tue, 31 Aug 2021 16:42:36 +0800 Subject: usb: dwc2: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20210831084236.1359677-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/hcd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 2a7828971d05..a215ec9e172e 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -5191,6 +5191,10 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg) hcd->has_tt = 1; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + retval = -EINVAL; + goto error1; + } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); -- cgit From 91fac0741d4817945c6ee0a17591421e7f5ecb86 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 7 Sep 2021 10:23:18 +0200 Subject: USB: cdc-acm: fix minor-number release If the driver runs out of minor numbers it would release minor 0 and allow another device to claim the minor while still in use. Fortunately, registering the tty class device of the second device would fail (with a stack dump) due to the sysfs name collision so no memory is leaked. Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail") Cc: stable@vger.kernel.org # 4.19 Cc: Jaejoong Kim Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210907082318.7757-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 7 +++++-- drivers/usb/class/cdc-acm.h | 2 ++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 8bbd8e29e60d..4e2f1552f4b7 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -726,7 +726,8 @@ static void acm_port_destruct(struct tty_port *port) { struct acm *acm = container_of(port, struct acm, port); - acm_release_minor(acm); + if (acm->minor != ACM_MINOR_INVALID) + acm_release_minor(acm); usb_put_intf(acm->control); kfree(acm->country_codes); kfree(acm); @@ -1323,8 +1324,10 @@ made_compressed_probe: usb_get_intf(acm->control); /* undone in destruct() */ minor = acm_alloc_minor(acm); - if (minor < 0) + if (minor < 0) { + acm->minor = ACM_MINOR_INVALID; goto err_put_port; + } acm->minor = minor; acm->dev = usb_dev; diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 8aef5eb769a0..3aa7f0a3ad71 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -22,6 +22,8 @@ #define ACM_TTY_MAJOR 166 #define ACM_TTY_MINORS 256 +#define ACM_MINOR_INVALID ACM_TTY_MINORS + /* * Requests. */ -- cgit From aad06846a2304e48e7a223fad8971eed16179606 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 7 Sep 2021 05:30:02 -0700 Subject: usb: ehci: Simplify platform driver registration Use platform_register_drivers() and platform_unregister_drivers() to register and unregister ehci platform drivers. This simplifies the code and prevents the following build errors seen with sparc:allmodconfig. drivers/usb/host/ehci-hcd.c:1301: error: "PLATFORM_DRIVER" redefined drivers/usb/host/ehci-sh.c:173:31: error: 'ehci_hcd_sh_driver' defined but not used Acked-by: Alan Stern Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/r/20210907123002.3951446-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 75 ++++++++++++++++----------------------------- 1 file changed, 27 insertions(+), 48 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6bdc6d6bf74d..1776c05d0a48 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -1278,29 +1279,39 @@ MODULE_LICENSE ("GPL"); #ifdef CONFIG_USB_EHCI_SH #include "ehci-sh.c" -#define PLATFORM_DRIVER ehci_hcd_sh_driver #endif #ifdef CONFIG_PPC_PS3 #include "ehci-ps3.c" -#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver #endif #ifdef CONFIG_USB_EHCI_HCD_PPC_OF #include "ehci-ppc-of.c" -#define OF_PLATFORM_DRIVER ehci_hcd_ppc_of_driver #endif #ifdef CONFIG_XPS_USB_HCD_XILINX #include "ehci-xilinx-of.c" -#define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver #endif #ifdef CONFIG_SPARC_LEON #include "ehci-grlib.c" -#define PLATFORM_DRIVER ehci_grlib_driver #endif +static struct platform_driver * const platform_drivers[] = { +#ifdef CONFIG_USB_EHCI_SH + &ehci_hcd_sh_driver, +#endif +#ifdef CONFIG_USB_EHCI_HCD_PPC_OF + &ehci_hcd_ppc_of_driver, +#endif +#ifdef CONFIG_XPS_USB_HCD_XILINX + &ehci_hcd_xilinx_of_driver, +#endif +#ifdef CONFIG_SPARC_LEON + &ehci_grlib_driver, +#endif +}; + static int __init ehci_hcd_init(void) { int retval = 0; @@ -1324,47 +1335,23 @@ static int __init ehci_hcd_init(void) ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root); #endif -#ifdef PLATFORM_DRIVER - retval = platform_driver_register(&PLATFORM_DRIVER); + retval = platform_register_drivers(platform_drivers, ARRAY_SIZE(platform_drivers)); if (retval < 0) goto clean0; -#endif - -#ifdef PS3_SYSTEM_BUS_DRIVER - retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER); - if (retval < 0) - goto clean2; -#endif -#ifdef OF_PLATFORM_DRIVER - retval = platform_driver_register(&OF_PLATFORM_DRIVER); +#ifdef CONFIG_PPC_PS3 + retval = ps3_ehci_driver_register(&ps3_ehci_driver); if (retval < 0) - goto clean3; + goto clean1; #endif -#ifdef XILINX_OF_PLATFORM_DRIVER - retval = platform_driver_register(&XILINX_OF_PLATFORM_DRIVER); - if (retval < 0) - goto clean4; -#endif - return retval; + return 0; -#ifdef XILINX_OF_PLATFORM_DRIVER - /* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */ -clean4: -#endif -#ifdef OF_PLATFORM_DRIVER - platform_driver_unregister(&OF_PLATFORM_DRIVER); -clean3: -#endif -#ifdef PS3_SYSTEM_BUS_DRIVER - ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); -clean2: +#ifdef CONFIG_PPC_PS3 +clean1: #endif -#ifdef PLATFORM_DRIVER - platform_driver_unregister(&PLATFORM_DRIVER); + platform_unregister_drivers(platform_drivers, ARRAY_SIZE(platform_drivers)); clean0: -#endif #ifdef CONFIG_DYNAMIC_DEBUG debugfs_remove(ehci_debug_root); ehci_debug_root = NULL; @@ -1376,18 +1363,10 @@ module_init(ehci_hcd_init); static void __exit ehci_hcd_cleanup(void) { -#ifdef XILINX_OF_PLATFORM_DRIVER - platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); -#endif -#ifdef OF_PLATFORM_DRIVER - platform_driver_unregister(&OF_PLATFORM_DRIVER); -#endif -#ifdef PLATFORM_DRIVER - platform_driver_unregister(&PLATFORM_DRIVER); -#endif -#ifdef PS3_SYSTEM_BUS_DRIVER - ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); +#ifdef CONFIG_PPC_PS3 + ps3_ehci_driver_unregister(&ps3_ehci_driver); #endif + platform_unregister_drivers(platform_drivers, ARRAY_SIZE(platform_drivers)); #ifdef CONFIG_DYNAMIC_DEBUG debugfs_remove(ehci_debug_root); #endif -- cgit From d91adc5322ab53df4b6d1989242bfb6c63163eb2 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Tue, 31 Aug 2021 08:54:19 +0200 Subject: Revert "USB: bcma: Add a check for devm_gpiod_get" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit f3de5d857bb2362b00e2a8d4bc886cd49dcb66db. That commit broke USB on all routers that have USB always powered on and don't require toggling any GPIO. It's a majority of devices actually. The original code worked and seemed safe: vcc GPIO is optional and bcma_hci_platform_power_gpio() takes care of checking the pointer before using it. This revert fixes: [ 10.801127] bcma_hcd: probe of bcma0:11 failed with error -2 Fixes: f3de5d857bb2 ("USB: bcma: Add a check for devm_gpiod_get") Cc: stable Cc: Chuhong Yuan Signed-off-by: Rafał Miłecki Link: https://lore.kernel.org/r/20210831065419.18371-1-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/bcma-hcd.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c index 337b425dd4b0..2df52f75f6b3 100644 --- a/drivers/usb/host/bcma-hcd.c +++ b/drivers/usb/host/bcma-hcd.c @@ -406,12 +406,9 @@ static int bcma_hcd_probe(struct bcma_device *core) return -ENOMEM; usb_dev->core = core; - if (core->dev.of_node) { + if (core->dev.of_node) usb_dev->gpio_desc = devm_gpiod_get(&core->dev, "vcc", GPIOD_OUT_HIGH); - if (IS_ERR(usb_dev->gpio_desc)) - return PTR_ERR(usb_dev->gpio_desc); - } switch (core->id.id) { case BCMA_CORE_USB20_HOST: -- cgit From 8cfac9a6744fcb143cb3e94ce002f09fd17fadbb Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 8 Sep 2021 10:28:19 +0800 Subject: usb: dwc3: core: balance phy init and exit After we start to do core soft reset while usb role switch, the phy init is invoked at every switch to device mode, but its counter part de-init is missing, this causes the actual phy init can not be done when we really want to re-init phy like system resume, because the counter maintained by phy core is not 0. considering phy init is actually redundant for role switch, so move out the phy init from core soft reset to dwc3 core init where is the only place required. Fixes: f88359e1588b ("usb: dwc3: core: Do core softreset when switch mode") Cc: Tested-by: faqiang.zhu Tested-by: John Stultz #HiKey960 Acked-by: Felipe Balbi Signed-off-by: Li Jun Link: https://lore.kernel.org/r/1631068099-13559-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 01866dcb953b..0104a80b185e 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -264,19 +264,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; int retries = 1000; - int ret; - - usb_phy_init(dwc->usb2_phy); - usb_phy_init(dwc->usb3_phy); - ret = phy_init(dwc->usb2_generic_phy); - if (ret < 0) - return ret; - - ret = phy_init(dwc->usb3_generic_phy); - if (ret < 0) { - phy_exit(dwc->usb2_generic_phy); - return ret; - } /* * We're resetting only the device side because, if we're in host mode, @@ -310,9 +297,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) udelay(1); } while (--retries); - phy_exit(dwc->usb3_generic_phy); - phy_exit(dwc->usb2_generic_phy); - return -ETIMEDOUT; done: @@ -982,9 +966,21 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->phys_ready = true; } + usb_phy_init(dwc->usb2_phy); + usb_phy_init(dwc->usb3_phy); + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + goto err0a; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) { + phy_exit(dwc->usb2_generic_phy); + goto err0a; + } + ret = dwc3_core_soft_reset(dwc); if (ret) - goto err0a; + goto err1; if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { -- cgit From 91bb163e1e4f88092f50dfaa5a816b658753e4b2 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Thu, 9 Sep 2021 14:45:15 +0400 Subject: usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave According USB spec each ISOC transaction should be performed in a designated for that transaction interval. On bus errors or delays in operating system scheduling of client software can result in no packet being transferred for a (micro)frame. An error indication should be returned as status to the client software in such a case. Current implementation in case of missed/dropped interval send same data in next possible interval instead of reporting missed isoc. This fix complete requests with -ENODATA if interval elapsed. HSOTG core in BDMA and Slave modes haven't HW support for (micro)frames tracking, this is why SW should care about tracking of (micro)frames. Because of that method and consider operating system scheduling delays, added few additional checking's of elapsed target (micro)frame: 1. Immediately before enabling EP to start transfer. 2. With any transfer completion interrupt. 3. With incomplete isoc in/out interrupt. 4. With EP disabled interrupt because of incomplete transfer. 5. With OUT token received while EP disabled interrupt (for OUT transfers). 6. With NAK replied to IN token interrupt (for IN transfers). As part of ISOC flow, additionally fixed 'current' and 'target' frame calculation functions. In HS mode SOF limits provided by DSTS register is 0x3fff, but in non HS mode this limit is 0x7ff. Tested by internal tool which also using for dwc3 testing. Signed-off-by: Minas Harutyunyan Cc: stable Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.1631175721.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 189 ++++++++++++++++++++++++++-------------------- 1 file changed, 106 insertions(+), 83 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 837237e4bc96..f09cbdfac9df 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -115,10 +115,16 @@ static inline bool using_desc_dma(struct dwc2_hsotg *hsotg) */ static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) { + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + hs_ep->target_frame += hs_ep->interval; - if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) { + if (hs_ep->target_frame > limit) { hs_ep->frame_overrun = true; - hs_ep->target_frame &= DSTS_SOFFN_LIMIT; + hs_ep->target_frame &= limit; } else { hs_ep->frame_overrun = false; } @@ -136,10 +142,16 @@ static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) */ static inline void dwc2_gadget_dec_frame_num_by_one(struct dwc2_hsotg_ep *hs_ep) { + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + if (hs_ep->target_frame) hs_ep->target_frame -= 1; else - hs_ep->target_frame = DSTS_SOFFN_LIMIT; + hs_ep->target_frame = limit; } /** @@ -1018,6 +1030,12 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) dwc2_writel(hsotg, ctrl, depctl); } +static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep); +static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req, + int result); + /** * dwc2_hsotg_start_req - start a USB request from an endpoint's queue * @hsotg: The controller state. @@ -1170,14 +1188,19 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg, } } - if (hs_ep->isochronous && hs_ep->interval == 1) { - hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg); - dwc2_gadget_incr_frame_num(hs_ep); - - if (hs_ep->target_frame & 0x1) - ctrl |= DXEPCTL_SETODDFR; - else - ctrl |= DXEPCTL_SETEVENFR; + if (hs_ep->isochronous) { + if (!dwc2_gadget_target_frame_elapsed(hs_ep)) { + if (hs_ep->interval == 1) { + if (hs_ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; + } + ctrl |= DXEPCTL_CNAK; + } else { + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + return; + } } ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ @@ -1325,12 +1348,16 @@ static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep) u32 target_frame = hs_ep->target_frame; u32 current_frame = hsotg->frame_number; bool frame_overrun = hs_ep->frame_overrun; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; if (!frame_overrun && current_frame >= target_frame) return true; if (frame_overrun && current_frame >= target_frame && - ((current_frame - target_frame) < DSTS_SOFFN_LIMIT / 2)) + ((current_frame - target_frame) < limit / 2)) return true; return false; @@ -1713,11 +1740,9 @@ static struct dwc2_hsotg_req *get_ep_head(struct dwc2_hsotg_ep *hs_ep) */ static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep) { - u32 mask; struct dwc2_hsotg *hsotg = hs_ep->parent; int dir_in = hs_ep->dir_in; struct dwc2_hsotg_req *hs_req; - u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK; if (!list_empty(&hs_ep->queue)) { hs_req = get_ep_head(hs_ep); @@ -1733,9 +1758,6 @@ static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep) } else { dev_dbg(hsotg->dev, "%s: No more ISOC-OUT requests\n", __func__); - mask = dwc2_readl(hsotg, epmsk_reg); - mask |= DOEPMSK_OUTTKNEPDISMSK; - dwc2_writel(hsotg, mask, epmsk_reg); } } @@ -2306,19 +2328,6 @@ static void dwc2_hsotg_ep0_zlp(struct dwc2_hsotg *hsotg, bool dir_in) dwc2_hsotg_program_zlp(hsotg, hsotg->eps_out[0]); } -static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg, - u32 epctl_reg) -{ - u32 ctrl; - - ctrl = dwc2_readl(hsotg, epctl_reg); - if (ctrl & DXEPCTL_EOFRNUM) - ctrl |= DXEPCTL_SETEVENFR; - else - ctrl |= DXEPCTL_SETODDFR; - dwc2_writel(hsotg, ctrl, epctl_reg); -} - /* * dwc2_gadget_get_xfersize_ddma - get transferred bytes amount from desc * @hs_ep - The endpoint on which transfer went @@ -2439,20 +2448,11 @@ static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum) dwc2_hsotg_ep0_zlp(hsotg, true); } - /* - * Slave mode OUT transfers do not go through XferComplete so - * adjust the ISOC parity here. - */ - if (!using_dma(hsotg)) { - if (hs_ep->isochronous && hs_ep->interval == 1) - dwc2_hsotg_change_ep_iso_parity(hsotg, DOEPCTL(epnum)); - else if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - } - /* Set actual frame number for completed transfers */ - if (!using_desc_dma(hsotg) && hs_ep->isochronous) - req->frame_number = hsotg->frame_number; + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + req->frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result); } @@ -2766,6 +2766,12 @@ static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg, return; } + /* Set actual frame number for completed transfers */ + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + hs_req->req.frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); } @@ -2826,23 +2832,18 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); - if (hs_ep->isochronous) { - dwc2_hsotg_complete_in(hsotg, hs_ep); - return; - } - if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) { int dctl = dwc2_readl(hsotg, DCTL); dctl |= DCTL_CGNPINNAK; dwc2_writel(hsotg, dctl, DCTL); } - return; - } + } else { - if (dctl & DCTL_GOUTNAKSTS) { - dctl |= DCTL_CGOUTNAK; - dwc2_writel(hsotg, dctl, DCTL); + if (dctl & DCTL_GOUTNAKSTS) { + dctl |= DCTL_CGOUTNAK; + dwc2_writel(hsotg, dctl, DCTL); + } } if (!hs_ep->isochronous) @@ -2863,8 +2864,6 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) /* Update current frame number value. */ hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); } while (dwc2_gadget_target_frame_elapsed(hs_ep)); - - dwc2_gadget_start_next_request(hs_ep); } /** @@ -2881,8 +2880,8 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) { struct dwc2_hsotg *hsotg = ep->parent; + struct dwc2_hsotg_req *hs_req; int dir_in = ep->dir_in; - u32 doepmsk; if (dir_in || !ep->isochronous) return; @@ -2896,28 +2895,39 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) return; } - if (ep->interval > 1 && - ep->target_frame == TARGET_FRAME_INITIAL) { + if (ep->target_frame == TARGET_FRAME_INITIAL) { u32 ctrl; ep->target_frame = hsotg->frame_number; - dwc2_gadget_incr_frame_num(ep); + if (ep->interval > 1) { + ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index)); + if (ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; - ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index)); - if (ep->target_frame & 0x1) - ctrl |= DXEPCTL_SETODDFR; - else - ctrl |= DXEPCTL_SETEVENFR; + dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index)); + } + } + + while (dwc2_gadget_target_frame_elapsed(ep)) { + hs_req = get_ep_head(ep); + if (hs_req) + dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA); - dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index)); + dwc2_gadget_incr_frame_num(ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); } - dwc2_gadget_start_next_request(ep); - doepmsk = dwc2_readl(hsotg, DOEPMSK); - doepmsk &= ~DOEPMSK_OUTTKNEPDISMSK; - dwc2_writel(hsotg, doepmsk, DOEPMSK); + if (!ep->req) + dwc2_gadget_start_next_request(ep); + } +static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep); + /** * dwc2_gadget_handle_nak - handle NAK interrupt * @hs_ep: The endpoint on which interrupt is asserted. @@ -2935,7 +2945,9 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg_req *hs_req; int dir_in = hs_ep->dir_in; + u32 ctrl; if (!dir_in || !hs_ep->isochronous) return; @@ -2977,13 +2989,29 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) dwc2_writel(hsotg, ctrl, DIEPCTL(hs_ep->index)); } - - dwc2_hsotg_complete_request(hsotg, hs_ep, - get_ep_head(hs_ep), 0); } - if (!using_desc_dma(hsotg)) + if (using_desc_dma(hsotg)) + return; + + ctrl = dwc2_readl(hsotg, DIEPCTL(hs_ep->index)); + if (ctrl & DXEPCTL_EPENA) + dwc2_hsotg_ep_stop_xfr(hsotg, hs_ep); + else + dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); + + while (dwc2_gadget_target_frame_elapsed(hs_ep)) { + hs_req = get_ep_head(hs_ep); + if (hs_req) + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); + } + + if (!hs_ep->req) + dwc2_gadget_start_next_request(hs_ep); } /** @@ -3048,12 +3076,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, * need to look at completing IN requests here * if operating slave mode */ - if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - - dwc2_hsotg_complete_in(hsotg, hs_ep); - if (ints & DXEPINT_NAKINTRPT) - ints &= ~DXEPINT_NAKINTRPT; + if (!hs_ep->isochronous || !(ints & DXEPINT_NAKINTRPT)) + dwc2_hsotg_complete_in(hsotg, hs_ep); if (idx == 0 && !hs_ep->req) dwc2_hsotg_enqueue_setup(hsotg); @@ -3062,10 +3086,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, * We're using DMA, we need to fire an OutDone here * as we ignore the RXFIFO. */ - if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - - dwc2_hsotg_handle_outdone(hsotg, idx); + if (!hs_ep->isochronous || !(ints & DXEPINT_OUTTKNEPDIS)) + dwc2_hsotg_handle_outdone(hsotg, idx); } } @@ -4085,6 +4107,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, mask |= DIEPMSK_NAKMSK; dwc2_writel(hsotg, mask, DIEPMSK); } else { + epctrl |= DXEPCTL_SNAK; mask = dwc2_readl(hsotg, DOEPMSK); mask |= DOEPMSK_OUTTKNEPDISMSK; dwc2_writel(hsotg, mask, DOEPMSK); -- cgit From 58877b0824da15698bd85a0a9dbfa8c354e6ecb7 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 9 Sep 2021 12:11:58 +0530 Subject: usb: core: hcd: Add support for deferring roothub registration It has been observed with certain PCIe USB cards (like Inateck connected to AM64 EVM or J7200 EVM) that as soon as the primary roothub is registered, port status change is handled even before xHC is running leading to cold plug USB devices not detected. For such cases, registering both the root hubs along with the second HCD is required. Add support for deferring roothub registration in usb_add_hcd(), so that both primary and secondary roothubs are registered along with the second HCD. CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 29 +++++++++++++++++++++++------ include/linux/usb/hcd.h | 2 ++ 2 files changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 0f8b7c93310e..99ff2d23be05 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2775,6 +2775,7 @@ int usb_add_hcd(struct usb_hcd *hcd, { int retval; struct usb_device *rhdev; + struct usb_hcd *shared_hcd; if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); @@ -2935,13 +2936,26 @@ int usb_add_hcd(struct usb_hcd *hcd, goto err_hcd_driver_start; } + /* starting here, usbcore will pay attention to the shared HCD roothub */ + shared_hcd = hcd->shared_hcd; + if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) { + retval = register_root_hub(shared_hcd); + if (retval != 0) + goto err_register_root_hub; + + if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd)) + usb_hcd_poll_rh_status(shared_hcd); + } + /* starting here, usbcore will pay attention to this root hub */ - retval = register_root_hub(hcd); - if (retval != 0) - goto err_register_root_hub; + if (!HCD_DEFER_RH_REGISTER(hcd)) { + retval = register_root_hub(hcd); + if (retval != 0) + goto err_register_root_hub; - if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) - usb_hcd_poll_rh_status(hcd); + if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) + usb_hcd_poll_rh_status(hcd); + } return retval; @@ -2985,6 +2999,7 @@ EXPORT_SYMBOL_GPL(usb_add_hcd); void usb_remove_hcd(struct usb_hcd *hcd) { struct usb_device *rhdev = hcd->self.root_hub; + bool rh_registered; dev_info(hcd->self.controller, "remove, state %x\n", hcd->state); @@ -2995,6 +3010,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) dev_dbg(hcd->self.controller, "roothub graceful disconnect\n"); spin_lock_irq (&hcd_root_hub_lock); + rh_registered = hcd->rh_registered; hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); @@ -3004,7 +3020,8 @@ void usb_remove_hcd(struct usb_hcd *hcd) cancel_work_sync(&hcd->died_work); mutex_lock(&usb_bus_idr_lock); - usb_disconnect(&rhdev); /* Sets rhdev to NULL */ + if (rh_registered) + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ mutex_unlock(&usb_bus_idr_lock); /* diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 548a028f2dab..2c1fc9212cf2 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -124,6 +124,7 @@ struct usb_hcd { #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */ #define HCD_FLAG_DEAD 6 /* controller has died? */ #define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */ +#define HCD_FLAG_DEFER_RH_REGISTER 8 /* Defer roothub registration */ /* The flags can be tested using these macros; they are likely to * be slightly faster than test_bit(). @@ -134,6 +135,7 @@ struct usb_hcd { #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING)) #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD)) +#define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER)) /* * Specifies if interfaces are authorized by default -- cgit From b7a0a792f864583207c593b50fd1b752ed89f4c1 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 9 Sep 2021 12:11:59 +0530 Subject: xhci: Set HCD flag to defer primary roothub registration Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer registering primary roothub in usb_add_hcd(). This will make sure both primary roothub and secondary roothub will be registered along with the second HCD. This is required for cold plugged USB devices to be detected in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM or J7200 EVM). CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f3dabd02382c..93c38b557afd 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -692,6 +692,7 @@ int xhci_run(struct usb_hcd *hcd) if (ret) xhci_free_command(xhci, command); } + set_bit(HCD_FLAG_DEFER_RH_REGISTER, &hcd->flags); xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_run for USB2 roothub"); -- cgit From 5cf86349e98b14f505f83aae45a6df2bacc15a7a Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 9 Sep 2021 12:12:00 +0530 Subject: usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd() No functional change. Since configuration to stop HCD is invoked from multiple places, group all of them in usb_stop_hcd(). Tested-by: Chris Chiu Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-4-kishon@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 39 ++++++++++++++++++++++----------------- 1 file changed, 22 insertions(+), 17 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 99ff2d23be05..7ee6e4cc0d89 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2760,6 +2760,26 @@ static void usb_put_invalidate_rhdev(struct usb_hcd *hcd) usb_put_dev(rhdev); } +/** + * usb_stop_hcd - Halt the HCD + * @hcd: the usb_hcd that has to be halted + * + * Stop the root-hub polling timer and invoke the HCD's ->stop callback. + */ +static void usb_stop_hcd(struct usb_hcd *hcd) +{ + hcd->rh_pollable = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + + hcd->driver->stop(hcd); + hcd->state = HC_STATE_HALT; + + /* In case the HCD restarted the timer, stop it again. */ + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); +} + /** * usb_add_hcd - finish generic HCD structure initialization and register * @hcd: the usb_hcd structure to initialize @@ -2960,13 +2980,7 @@ int usb_add_hcd(struct usb_hcd *hcd, return retval; err_register_root_hub: - hcd->rh_pollable = 0; - clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - del_timer_sync(&hcd->rh_timer); - hcd->driver->stop(hcd); - hcd->state = HC_STATE_HALT; - clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - del_timer_sync(&hcd->rh_timer); + usb_stop_hcd(hcd); err_hcd_driver_start: if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0) free_irq(irqnum, hcd); @@ -3039,16 +3053,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke * the hub_status_data() callback. */ - hcd->rh_pollable = 0; - clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - del_timer_sync(&hcd->rh_timer); - - hcd->driver->stop(hcd); - hcd->state = HC_STATE_HALT; - - /* In case the HCD restarted the timer, stop it again. */ - clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - del_timer_sync(&hcd->rh_timer); + usb_stop_hcd(hcd); if (usb_hcd_is_primary_hcd(hcd)) { if (hcd->irq > 0) -- cgit From dbe2518b2d8eabffa74dbf7d9fdd7dacddab7fc0 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Sat, 11 Sep 2021 22:58:30 +0400 Subject: usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA When last descriptor in a descriptor list completed with XferComplete interrupt, core switching to handle next descriptor and assert BNA interrupt. Both these interrupts are set while dwc2_hsotg_epint() handler called. Each interrupt should be handled separately: first XferComplete interrupt then BNA interrupt, otherwise last completed transfer will not be giveback to function driver as completed request. Fixes: 729cac693eec ("usb: dwc2: Change ISOC DDMA flow") Cc: stable Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/a36981accc26cd674c5d8f8da6164344b94ec1fe.1631386531.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index f09cbdfac9df..11d85a6e0b0d 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3067,9 +3067,7 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, /* In DDMA handle isochronous requests separately */ if (using_desc_dma(hsotg) && hs_ep->isochronous) { - /* XferCompl set along with BNA */ - if (!(ints & DXEPINT_BNAINTR)) - dwc2_gadget_complete_isoc_request_ddma(hs_ep); + dwc2_gadget_complete_isoc_request_ddma(hs_ep); } else if (dir_in) { /* * We get OutDone from the FIFO, so we only -- cgit From 595091a1426a3b2625dad322f69fe569dc9d8943 Mon Sep 17 00:00:00 2001 From: Jack Pham Date: Thu, 9 Sep 2021 10:48:10 -0700 Subject: usb: gadget: f_uac2: Add missing companion descriptor for feedback EP The f_uac2 function fails to enumerate when connected in SuperSpeed due to the feedback endpoint missing the companion descriptor. Add a new ss_epin_fback_desc_comp descriptor and append it behind the ss_epin_fback_desc both in the static definition of the ss_audio_desc structure as well as its dynamic construction in setup_headers(). Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support") Cc: stable Signed-off-by: Jack Pham Link: https://lore.kernel.org/r/20210909174811.12534-2-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_uac2.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 3c34995276e7..d89c1ebb07f4 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -406,6 +406,14 @@ static struct usb_endpoint_descriptor ss_epin_fback_desc = { .bInterval = 4, }; +static struct usb_ss_ep_comp_descriptor ss_epin_fback_desc_comp = { + .bLength = sizeof(ss_epin_fback_desc_comp), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bMaxBurst = 0, + .bmAttributes = 0, + .wBytesPerInterval = cpu_to_le16(4), +}; + /* Audio Streaming IN Interface - Alt0 */ static struct usb_interface_descriptor std_as_in_if0_desc = { @@ -597,6 +605,7 @@ static struct usb_descriptor_header *ss_audio_desc[] = { (struct usb_descriptor_header *)&ss_epout_desc_comp, (struct usb_descriptor_header *)&as_iso_out_desc, (struct usb_descriptor_header *)&ss_epin_fback_desc, + (struct usb_descriptor_header *)&ss_epin_fback_desc_comp, (struct usb_descriptor_header *)&std_as_in_if0_desc, (struct usb_descriptor_header *)&std_as_in_if1_desc, @@ -705,6 +714,7 @@ static void setup_headers(struct f_uac2_opts *opts, { struct usb_ss_ep_comp_descriptor *epout_desc_comp = NULL; struct usb_ss_ep_comp_descriptor *epin_desc_comp = NULL; + struct usb_ss_ep_comp_descriptor *epin_fback_desc_comp = NULL; struct usb_endpoint_descriptor *epout_desc; struct usb_endpoint_descriptor *epin_desc; struct usb_endpoint_descriptor *epin_fback_desc; @@ -730,6 +740,7 @@ static void setup_headers(struct f_uac2_opts *opts, epout_desc_comp = &ss_epout_desc_comp; epin_desc_comp = &ss_epin_desc_comp; epin_fback_desc = &ss_epin_fback_desc; + epin_fback_desc_comp = &ss_epin_fback_desc_comp; ep_int_desc = &ss_ep_int_desc; } @@ -773,8 +784,11 @@ static void setup_headers(struct f_uac2_opts *opts, headers[i++] = USBDHDR(&as_iso_out_desc); - if (EPOUT_FBACK_IN_EN(opts)) + if (EPOUT_FBACK_IN_EN(opts)) { headers[i++] = USBDHDR(epin_fback_desc); + if (epin_fback_desc_comp) + headers[i++] = USBDHDR(epin_fback_desc_comp); + } } if (EPIN_EN(opts)) { -- cgit From f0e8a206a2a53a919e1709c654cb65d519f7befb Mon Sep 17 00:00:00 2001 From: Jack Pham Date: Thu, 9 Sep 2021 10:48:11 -0700 Subject: usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval For Isochronous endpoints, the SS companion descriptor's wBytesPerInterval field is required to reserve bus time in order to transmit the required payload during the service interval. If left at 0, the UAC2 function is unable to transact data on its playback or capture endpoints in SuperSpeed mode. Since f_uac2 currently does not support any bursting this value can be exactly equal to the calculated wMaxPacketSize. Tested with Windows 10 as a host. Fixes: f8cb3d556be3 ("usb: f_uac2: adds support for SS and SSP") Cc: stable Signed-off-by: Jack Pham Link: https://lore.kernel.org/r/20210909174811.12534-3-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_uac2.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index d89c1ebb07f4..be864560bfea 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -1178,6 +1178,9 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) agdev->out_ep_maxpsize = max_t(u16, agdev->out_ep_maxpsize, le16_to_cpu(ss_epout_desc.wMaxPacketSize)); + ss_epin_desc_comp.wBytesPerInterval = ss_epin_desc.wMaxPacketSize; + ss_epout_desc_comp.wBytesPerInterval = ss_epout_desc.wMaxPacketSize; + // HS and SS endpoint addresses are copied from autoconfigured FS descriptors hs_ep_int_desc.bEndpointAddress = fs_ep_int_desc.bEndpointAddress; hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress; -- cgit From 8d753db5c227d1f403c4bc9cae4ae02c862413cd Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 8 Sep 2021 21:55:56 +0200 Subject: misc: genwqe: Fixes DMA mask setting Commit 505b08777d78 ("misc: genwqe: Use dma_set_mask_and_coherent to simplify code") changed the logic in the code. Instead of a ||, a && should have been used to keep the code the same. Fixes: 505b08777d78 ("misc: genwqe: Use dma_set_mask_and_coherent to simplify code") Cc: stable Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/be49835baa8ba6daba5813b399edf6300f7fdbda.1631130862.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman --- drivers/misc/genwqe/card_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c index 2e1befbd1ad9..693981891870 100644 --- a/drivers/misc/genwqe/card_base.c +++ b/drivers/misc/genwqe/card_base.c @@ -1090,7 +1090,7 @@ static int genwqe_pci_setup(struct genwqe_dev *cd) /* check for 64-bit DMA address supported (DAC) */ /* check for 32-bit DMA address supported (SAC) */ - if (dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64)) || + if (dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64)) && dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32))) { dev_err(&pci_dev->dev, "err: neither DMA32 nor DMA64 supported\n"); -- cgit From 06e49073dfba24df4b1073a068631b13a0039c34 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 1 Sep 2021 17:38:06 -0700 Subject: tty: synclink_gt: rename a conflicting function name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 'set_signals()' in synclink_gt.c conflicts with an exported symbol in arch/um/, so change set_signals() to set_gtsignals(). Keep the function names similar by also changing get_signals() to get_gtsignals(). ../drivers/tty/synclink_gt.c:442:13: error: conflicting types for ‘set_signals’ static void set_signals(struct slgt_info *info); ^~~~~~~~~~~ In file included from ../include/linux/irqflags.h:16:0, from ../include/linux/spinlock.h:58, from ../include/linux/mm_types.h:9, from ../include/linux/buildid.h:5, from ../include/linux/module.h:14, from ../drivers/tty/synclink_gt.c:46: ../arch/um/include/asm/irqflags.h:6:5: note: previous declaration of ‘set_signals’ was here int set_signals(int enable); ^~~~~~~~~~~ Fixes: 705b6c7b34f2 ("[PATCH] new driver synclink_gt") Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Paul Fulghum Signed-off-by: Randy Dunlap Link: https://lore.kernel.org/r/20210902003806.17054-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/synclink_gt.c | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index a9acd93e85b7..25c558e65ece 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -438,8 +438,8 @@ static void reset_tbufs(struct slgt_info *info); static void tdma_reset(struct slgt_info *info); static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count); -static void get_signals(struct slgt_info *info); -static void set_signals(struct slgt_info *info); +static void get_gtsignals(struct slgt_info *info); +static void set_gtsignals(struct slgt_info *info); static void set_rate(struct slgt_info *info, u32 data_rate); static void bh_transmit(struct slgt_info *info); @@ -720,7 +720,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -730,7 +730,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) if (!C_CRTSCTS(tty) || !tty_throttled(tty)) info->signals |= SerialSignal_RTS; spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -1181,7 +1181,7 @@ static inline void line_info(struct seq_file *m, struct slgt_info *info) /* output current serial signal states */ spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); stat_buf[0] = 0; @@ -1281,7 +1281,7 @@ static void throttle(struct tty_struct * tty) if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals &= ~SerialSignal_RTS; - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1306,7 +1306,7 @@ static void unthrottle(struct tty_struct * tty) if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals |= SerialSignal_RTS; - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1477,7 +1477,7 @@ static int hdlcdev_open(struct net_device *dev) /* inform generic HDLC layer of current DCD status */ spin_lock_irqsave(&info->lock, flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock, flags); if (info->signals & SerialSignal_DCD) netif_carrier_on(dev); @@ -2229,7 +2229,7 @@ static void isr_txeom(struct slgt_info *info, unsigned short status) if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) { info->signals &= ~SerialSignal_RTS; info->drop_rts_on_tx_done = false; - set_signals(info); + set_gtsignals(info); } #if SYNCLINK_GENERIC_HDLC @@ -2394,7 +2394,7 @@ static void shutdown(struct slgt_info *info) if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_gtsignals(info); } flush_cond_wait(&info->gpio_wait_q); @@ -2422,7 +2422,7 @@ static void program_hw(struct slgt_info *info) else async_mode(info); - set_signals(info); + set_gtsignals(info); info->dcd_chkcount = 0; info->cts_chkcount = 0; @@ -2430,7 +2430,7 @@ static void program_hw(struct slgt_info *info) info->dsr_chkcount = 0; slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI); - get_signals(info); + get_gtsignals(info); if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD)) @@ -2667,7 +2667,7 @@ static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr) spin_lock_irqsave(&info->lock,flags); /* return immediately if state matches requested events */ - get_signals(info); + get_gtsignals(info); s = info->signals; events = mask & @@ -3085,7 +3085,7 @@ static int tiocmget(struct tty_struct *tty) unsigned long flags; spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) + @@ -3124,7 +3124,7 @@ static int tiocmset(struct tty_struct *tty, info->signals &= ~SerialSignal_DTR; spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); return 0; } @@ -3135,7 +3135,7 @@ static int carrier_raised(struct tty_port *port) struct slgt_info *info = container_of(port, struct slgt_info, port); spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); return (info->signals & SerialSignal_DCD) ? 1 : 0; } @@ -3150,7 +3150,7 @@ static void dtr_rts(struct tty_port *port, int on) info->signals |= SerialSignal_RTS | SerialSignal_DTR; else info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_gtsignals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -3948,10 +3948,10 @@ static void tx_start(struct slgt_info *info) if (info->params.mode != MGSL_MODE_ASYNC) { if (info->params.flags & HDLC_FLAG_AUTO_RTS) { - get_signals(info); + get_gtsignals(info); if (!(info->signals & SerialSignal_RTS)) { info->signals |= SerialSignal_RTS; - set_signals(info); + set_gtsignals(info); info->drop_rts_on_tx_done = true; } } @@ -4005,7 +4005,7 @@ static void reset_port(struct slgt_info *info) rx_stop(info); info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_gtsignals(info); slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); } @@ -4427,7 +4427,7 @@ static void tx_set_idle(struct slgt_info *info) /* * get state of V24 status (input) signals */ -static void get_signals(struct slgt_info *info) +static void get_gtsignals(struct slgt_info *info) { unsigned short status = rd_reg16(info, SSR); @@ -4489,7 +4489,7 @@ static void msc_set_vcr(struct slgt_info *info) /* * set state of V24 control (output) signals */ -static void set_signals(struct slgt_info *info) +static void set_gtsignals(struct slgt_info *info) { unsigned char val = rd_reg8(info, VCR); if (info->signals & SerialSignal_DTR) -- cgit From ad7cc2d41b7a8d0c5c5ecff37c3de7a4e137b3a6 Mon Sep 17 00:00:00 2001 From: Cameron Berkenpas Date: Mon, 13 Sep 2021 14:26:29 -0700 Subject: ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops. This patch initializes and enables speaker output on the Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 series of laptops using the HDA verb sequence specific to each model. Speaker automute is suppressed for the Lenovo Legion 7i 15IMHG05 to avoid breaking speaker output on resume and when devices are unplugged from its headphone jack. Thanks to: Andreas Holzer, Vincent Morel, sycxyc, Max Christian Pohle and all others that helped. [ minor coding style fixes by tiwai ] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555 Signed-off-by: Cameron Berkenpas Cc: Link: https://lore.kernel.org/r/20210913212627.339362-1-cam@neo-zeon.de Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 129 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 129 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8b7a389b6aed..4407f7da57c4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6429,6 +6429,20 @@ static void alc_fixup_thinkpad_acpi(struct hda_codec *codec, hda_fixup_thinkpad_acpi(codec, fix, action); } +/* Fixup for Lenovo Legion 15IMHg05 speaker output on headset removal. */ +static void alc287_fixup_legion_15imhg05_speakers(struct hda_codec *codec, + const struct hda_fixup *fix, + int action) +{ + struct alc_spec *spec = codec->spec; + + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + spec->gen.suppress_auto_mute = 1; + break; + } +} + /* for alc295_fixup_hp_top_speakers */ #include "hp_x360_helper.c" @@ -6646,6 +6660,10 @@ enum { ALC623_FIXUP_LENOVO_THINKSTATION_P340, ALC255_FIXUP_ACER_HEADPHONE_AND_MIC, ALC236_FIXUP_HP_LIMIT_INT_MIC_BOOST, + ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS, + ALC287_FIXUP_LEGION_15IMHG05_AUTOMUTE, + ALC287_FIXUP_YOGA7_14ITL_SPEAKERS, + ALC287_FIXUP_13S_GEN2_SPEAKERS }; static const struct hda_fixup alc269_fixups[] = { @@ -8236,6 +8254,113 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF, }, + [ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS] = { + .type = HDA_FIXUP_VERBS, + //.v.verbs = legion_15imhg05_coefs, + .v.verbs = (const struct hda_verb[]) { + // set left speaker Legion 7i. + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x41 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xc }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x1a }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + // set right speaker Legion 7i. + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x42 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xc }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2a }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + {} + }, + .chained = true, + .chain_id = ALC287_FIXUP_LEGION_15IMHG05_AUTOMUTE, + }, + [ALC287_FIXUP_LEGION_15IMHG05_AUTOMUTE] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc287_fixup_legion_15imhg05_speakers, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MODE, + }, + [ALC287_FIXUP_YOGA7_14ITL_SPEAKERS] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + // set left speaker Yoga 7i. + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x41 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xc }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x1a }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + // set right speaker Yoga 7i. + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x46 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xc }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2a }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + {} + }, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MODE, + }, + [ALC287_FIXUP_13S_GEN2_SPEAKERS] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x41 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + { 0x20, AC_VERB_SET_COEF_INDEX, 0x24 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x42 }, + { 0x20, AC_VERB_SET_COEF_INDEX, 0x26 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x0 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0xb020 }, + {} + }, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MODE, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -8630,6 +8755,10 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940", ALC298_FIXUP_LENOVO_SPK_VOLUME), SND_PCI_QUIRK(0x17aa, 0x3827, "Ideapad S740", ALC285_FIXUP_IDEAPAD_S740_COEF), SND_PCI_QUIRK(0x17aa, 0x3843, "Yoga 9i", ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP), + SND_PCI_QUIRK(0x17aa, 0x3813, "Legion 7i 15IMHG05", ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS), + SND_PCI_QUIRK(0x17aa, 0x3852, "Lenovo Yoga 7 14ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), + SND_PCI_QUIRK(0x17aa, 0x3853, "Lenovo Yoga 7 15ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), + SND_PCI_QUIRK(0x17aa, 0x3819, "Lenovo 13s Gen2 ITL", ALC287_FIXUP_13S_GEN2_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI), -- cgit From da546d6b748e570aa6e44acaa515cfc43baeaa0d Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Fri, 3 Sep 2021 00:03:25 +0200 Subject: arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize property tx-fifo-resize is now added by default by the dwc3-qcom driver to the SNPS DWC3 child node. So, lets drop the tx-fifo-resize property from dwc3-qcom nodes as having it there will cause the dwc3-qcom driver to error and abort probe with: [ 1.362938] dwc3-qcom 8af8800.usb: unable to add property [ 1.368405] dwc3-qcom 8af8800.usb: failed to register DWC3 Core, err=-17 Fixes: cefdd52fa045 ("usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default") Signed-off-by: Robert Marko Link: https://lore.kernel.org/r/20210902220325.1783567-1-robimarko@gmail.com Signed-off-by: Greg Kroah-Hartman --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index a620ac0d0b19..db333001df4d 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -487,7 +487,6 @@ interrupts = ; phys = <&qusb_phy_0>, <&usb0_ssphy>; phy-names = "usb2-phy", "usb3-phy"; - tx-fifo-resize; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -528,7 +527,6 @@ interrupts = ; phys = <&qusb_phy_1>, <&usb1_ssphy>; phy-names = "usb2-phy", "usb3-phy"; - tx-fifo-resize; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; -- cgit From 7049d853cfb928f50b6041cb4a5c6d6c1d8dd201 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 14 Sep 2021 11:11:19 +0200 Subject: tty: unexport tty_ldisc_release Initially, tty_ldisc_release() was exported for speakup (spk_tty) while in staging. Later, the call to this function was removed as it was bogus anyway. Remove the export now. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210914091134.17426-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ldisc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 756a4bfa6a69..3e4e0b20b4bb 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -812,7 +812,6 @@ void tty_ldisc_release(struct tty_struct *tty) tty_ldisc_debug(tty, "released\n"); } -EXPORT_SYMBOL_GPL(tty_ldisc_release); /** * tty_ldisc_init - ldisc setup for new tty -- cgit From 25a1433216489de4abc889910f744e952cb6dbae Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Sep 2021 21:35:48 +0900 Subject: mcb: fix error handling in mcb_alloc_bus() There are two bugs: 1) If ida_simple_get() fails then this code calls put_device(carrier) but we haven't yet called get_device(carrier) and probably that leads to a use after free. 2) After device_initialize() then we need to use put_device() to release the bus. This will free the internal resources tied to the device and call mcb_free_bus() which will free the rest. Fixes: 5d9e2ab9fea4 ("mcb: Implement bus->dev.release callback") Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Johannes Thumshirn Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com Signed-off-by: Greg Kroah-Hartman --- drivers/mcb/mcb-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c index edf4ee6eff25..cf128b3471d7 100644 --- a/drivers/mcb/mcb-core.c +++ b/drivers/mcb/mcb-core.c @@ -275,8 +275,8 @@ struct mcb_bus *mcb_alloc_bus(struct device *carrier) bus_nr = ida_simple_get(&mcb_ida, 0, 0, GFP_KERNEL); if (bus_nr < 0) { - rc = bus_nr; - goto err_free; + kfree(bus); + return ERR_PTR(bus_nr); } bus->bus_nr = bus_nr; @@ -291,12 +291,12 @@ struct mcb_bus *mcb_alloc_bus(struct device *carrier) dev_set_name(&bus->dev, "mcb:%d", bus_nr); rc = device_add(&bus->dev); if (rc) - goto err_free; + goto err_put; return bus; -err_free: - put_device(carrier); - kfree(bus); + +err_put: + put_device(&bus->dev); return ERR_PTR(rc); } EXPORT_SYMBOL_NS_GPL(mcb_alloc_bus, MCB); -- cgit From 3c3c8e88c8712bfe06cd10d7ca77a94a33610cd6 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Mon, 13 Sep 2021 21:01:14 -0500 Subject: platform/x86: amd-pmc: Increase the response register timeout There have been reports of approximately a 0.9%-1.7% failure rate in SMU communication timeouts with s0i3 entry on some OEM designs. Currently the design in amd-pmc is to try every 100us for up to 20ms. However the GPU driver which also communicates with the SMU using a mailbox register which the driver polls every 1us for up to 2000ms. In the GPU driver this was increased by commit 055162645a40 ("drm/amd/pm: increase time out value when sending msg to SMU") Increase the maximum timeout used by amd-pmc to 2000ms to match this behavior. This has been shown to improve the stability for machines that randomly have failures. Cc: stable@kernel.org Reported-by: Julian Sikorski BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1629 Signed-off-by: Mario Limonciello Acked-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20210914020115.655-1-mario.limonciello@amd.com Signed-off-by: Hans de Goede --- drivers/platform/x86/amd-pmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c index 3481479a2942..d6a7c896ac86 100644 --- a/drivers/platform/x86/amd-pmc.c +++ b/drivers/platform/x86/amd-pmc.c @@ -71,7 +71,7 @@ #define AMD_CPU_ID_YC 0x14B5 #define PMC_MSG_DELAY_MIN_US 100 -#define RESPONSE_REGISTER_LOOP_MAX 200 +#define RESPONSE_REGISTER_LOOP_MAX 20000 #define SOC_SUBSYSTEM_IP_MAX 12 #define DELAY_MIN_US 2000 -- cgit From d53c66594dc7606b191bb2976901a691d291a316 Mon Sep 17 00:00:00 2001 From: Ofir Bitton Date: Mon, 30 Aug 2021 15:02:09 +0300 Subject: habanalabs: fix potential race in interrupt wait ioctl We have a potential race where a user interrupt can be received in between user thread value comparison and before request was added to wait list. This means that if no consecutive interrupt will be received, user thread will timeout and fail. The solution is to add the request to wait list before we perform the comparison. Signed-off-by: Ofir Bitton Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- .../misc/habanalabs/common/command_submission.c | 35 +++++++++++++--------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index 7b0516cf808b..9a8b9191c28c 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -2740,10 +2740,20 @@ static int _hl_interrupt_wait_ioctl(struct hl_device *hdev, struct hl_ctx *ctx, else interrupt = &hdev->user_interrupt[interrupt_offset]; + /* Add pending user interrupt to relevant list for the interrupt + * handler to monitor + */ + spin_lock_irqsave(&interrupt->wait_list_lock, flags); + list_add_tail(&pend->wait_list_node, &interrupt->wait_list_head); + spin_unlock_irqrestore(&interrupt->wait_list_lock, flags); + + /* We check for completion value as interrupt could have been received + * before we added the node to the wait list + */ if (copy_from_user(&completion_value, u64_to_user_ptr(user_address), 4)) { dev_err(hdev->dev, "Failed to copy completion value from user\n"); rc = -EFAULT; - goto free_fence; + goto remove_pending_user_interrupt; } if (completion_value >= target_value) @@ -2752,14 +2762,7 @@ static int _hl_interrupt_wait_ioctl(struct hl_device *hdev, struct hl_ctx *ctx, *status = CS_WAIT_STATUS_BUSY; if (!timeout_us || (*status == CS_WAIT_STATUS_COMPLETED)) - goto free_fence; - - /* Add pending user interrupt to relevant list for the interrupt - * handler to monitor - */ - spin_lock_irqsave(&interrupt->wait_list_lock, flags); - list_add_tail(&pend->wait_list_node, &interrupt->wait_list_head); - spin_unlock_irqrestore(&interrupt->wait_list_lock, flags); + goto remove_pending_user_interrupt; wait_again: /* Wait for interrupt handler to signal completion */ @@ -2770,6 +2773,15 @@ wait_again: * If comparison fails, keep waiting until timeout expires */ if (completion_rc > 0) { + spin_lock_irqsave(&interrupt->wait_list_lock, flags); + /* reinit_completion must be called before we check for user + * completion value, otherwise, if interrupt is received after + * the comparison and before the next wait_for_completion, + * we will reach timeout and fail + */ + reinit_completion(&pend->fence.completion); + spin_unlock_irqrestore(&interrupt->wait_list_lock, flags); + if (copy_from_user(&completion_value, u64_to_user_ptr(user_address), 4)) { dev_err(hdev->dev, "Failed to copy completion value from user\n"); rc = -EFAULT; @@ -2780,11 +2792,7 @@ wait_again: if (completion_value >= target_value) { *status = CS_WAIT_STATUS_COMPLETED; } else { - spin_lock_irqsave(&interrupt->wait_list_lock, flags); - reinit_completion(&pend->fence.completion); timeout = completion_rc; - - spin_unlock_irqrestore(&interrupt->wait_list_lock, flags); goto wait_again; } } else if (completion_rc == -ERESTARTSYS) { @@ -2802,7 +2810,6 @@ remove_pending_user_interrupt: list_del(&pend->wait_list_node); spin_unlock_irqrestore(&interrupt->wait_list_lock, flags); -free_fence: kfree(pend); hl_ctx_put(ctx); -- cgit From beb71ee36e4de93c2b21d916fb94558333d99974 Mon Sep 17 00:00:00 2001 From: farah kassabri Date: Wed, 1 Sep 2021 15:48:04 +0300 Subject: habanalabs: fix kernel OOPs related to staged cs In case of single staged cs with both first/last indications set, we reach a scenario where in cs_release function flow we don't cancel the TDR work before freeing the cs memory, this lead to kernel OOPs since when the timer expires the work pointer will be freed already. In addition treat wait encaps cs "not found" handle as "OK" for the user in order to keep the user interface for both legacy and encpas signal/wait features the same. Signed-off-by: farah kassabri Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/common/command_submission.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index 9a8b9191c28c..deb080830ecb 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -405,7 +405,7 @@ static void staged_cs_put(struct hl_device *hdev, struct hl_cs *cs) static void cs_handle_tdr(struct hl_device *hdev, struct hl_cs *cs) { bool next_entry_found = false; - struct hl_cs *next; + struct hl_cs *next, *first_cs; if (!cs_needs_timeout(cs)) return; @@ -415,9 +415,16 @@ static void cs_handle_tdr(struct hl_device *hdev, struct hl_cs *cs) /* We need to handle tdr only once for the complete staged submission. * Hence, we choose the CS that reaches this function first which is * the CS marked as 'staged_last'. + * In case single staged cs was submitted which has both first and last + * indications, then "cs_find_first" below will return NULL, since we + * removed the cs node from the list before getting here, + * in such cases just continue with the cs to cancel it's TDR work. */ - if (cs->staged_cs && cs->staged_last) - cs = hl_staged_cs_find_first(hdev, cs->staged_sequence); + if (cs->staged_cs && cs->staged_last) { + first_cs = hl_staged_cs_find_first(hdev, cs->staged_sequence); + if (first_cs) + cs = first_cs; + } spin_unlock(&hdev->cs_mirror_lock); @@ -2026,9 +2033,10 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type, spin_unlock(&ctx->sig_mgr.lock); if (!handle_found) { - dev_err(hdev->dev, "Cannot find encapsulated signals handle for seq 0x%llx\n", + /* treat as signal CS already finished */ + dev_dbg(hdev->dev, "Cannot find encapsulated signals handle for seq 0x%llx\n", signal_seq); - rc = -EINVAL; + rc = 0; goto free_cs_chunk_array; } -- cgit From 3e08f157c2587fc7ada93abed41aae19bcbf8a6b Mon Sep 17 00:00:00 2001 From: Omer Shpigelman Date: Wed, 30 Dec 2020 08:05:18 +0200 Subject: habanalabs/gaudi: use direct MSI in single mode Due to FLR scenario when running inside a VM, we must not use indirect MSI because it might cause some issues on VM destroy. In a VM we use single MSI mode in contrary to multi MSI mode which is used in bare-metal. Hence direct MSI should be used in single MSI mode only. Signed-off-by: Omer Shpigelman Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/gaudi/gaudi.c | 9 ++++++--- drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h | 2 ++ 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 383865be3c2c..5249f8fd4d59 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -5802,6 +5802,7 @@ static void gaudi_add_end_of_cb_packets(struct hl_device *hdev, { struct gaudi_device *gaudi = hdev->asic_specific; struct packet_msg_prot *cq_pkt; + u64 msi_addr; u32 tmp; cq_pkt = kernel_address + len - (sizeof(struct packet_msg_prot) * 2); @@ -5823,10 +5824,12 @@ static void gaudi_add_end_of_cb_packets(struct hl_device *hdev, cq_pkt->ctl = cpu_to_le32(tmp); cq_pkt->value = cpu_to_le32(1); - if (!gaudi->multi_msi_mode) - msi_vec = 0; + if (gaudi->multi_msi_mode) + msi_addr = mmPCIE_MSI_INTR_0 + msi_vec * 4; + else + msi_addr = mmPCIE_CORE_MSI_REQ; - cq_pkt->addr = cpu_to_le64(CFG_BASE + mmPCIE_MSI_INTR_0 + msi_vec * 4); + cq_pkt->addr = cpu_to_le64(CFG_BASE + msi_addr); } static void gaudi_update_eq_ci(struct hl_device *hdev, u32 val) diff --git a/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h b/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h index ffdfbd9b3220..1a6576666794 100644 --- a/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h +++ b/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h @@ -308,6 +308,8 @@ #define mmPCIE_AUX_FLR_CTRL 0xC07394 #define mmPCIE_AUX_DBI 0xC07490 +#define mmPCIE_CORE_MSI_REQ 0xC04100 + #define mmPSOC_PCI_PLL_NR 0xC72100 #define mmSRAM_W_PLL_NR 0x4C8100 #define mmPSOC_HBM_PLL_NR 0xC74100 -- cgit From d09ff62c820b5950ab9958e77620a8498efe9386 Mon Sep 17 00:00:00 2001 From: Ofir Bitton Date: Thu, 2 Sep 2021 09:47:53 +0300 Subject: habanalabs: fail collective wait when not supported As collective wait operation is required only when NIC ports are available, we disable the option to submit a CS in case all the ports are disabled, which is the current situation in the upstream driver. Signed-off-by: Ofir Bitton Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/common/command_submission.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index deb080830ecb..5b7de857fbc1 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -1995,6 +1995,15 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type, goto free_cs_chunk_array; } + if (!hdev->nic_ports_mask) { + atomic64_inc(&ctx->cs_counters.validation_drop_cnt); + atomic64_inc(&cntr->validation_drop_cnt); + dev_err(hdev->dev, + "Collective operations not supported when NIC ports are disabled"); + rc = -EINVAL; + goto free_cs_chunk_array; + } + collective_engine_id = chunk->collective_engine_id; } -- cgit From fcffb759f7d53b8e6c6e91804eec994205099dd3 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 3 Sep 2021 09:02:03 +0100 Subject: habanalabs: Fix spelling mistake "FEADBACK" -> "FEEDBACK" There is a spelling mistake in a literal string. Fix it. Signed-off-by: Colin Ian King Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/gaudi/gaudi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 5249f8fd4d59..14da87b38e83 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -395,7 +395,7 @@ static struct hl_hw_obj_name_entry gaudi_so_id_to_str[] = { static struct hl_hw_obj_name_entry gaudi_monitor_id_to_str[] = { { .id = 200, .name = "MON_OBJ_DMA_DOWN_FEEDBACK_RESET" }, - { .id = 201, .name = "MON_OBJ_DMA_UP_FEADBACK_RESET" }, + { .id = 201, .name = "MON_OBJ_DMA_UP_FEEDBACK_RESET" }, { .id = 203, .name = "MON_OBJ_DRAM_TO_SRAM_QUEUE_FENCE" }, { .id = 204, .name = "MON_OBJ_TPC_0_CLK_GATE" }, { .id = 205, .name = "MON_OBJ_TPC_1_CLK_GATE" }, -- cgit From 0a5ff77bf0a94468d541735f919a633f167787e9 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Sun, 12 Sep 2021 10:25:49 +0300 Subject: habanalabs/gaudi: fix LBW RR configuration Couple of fixes to the LBW RR configuration: 1. Add missing configuration of the SM RR registers in the DMA_IF. 2. Remove HBW range that doesn't belong. 3. Add entire gap + DBG area, from end of TPC7 to end of entire DBG space. Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/gaudi/gaudi_security.c | 115 ++++++++++++++----------- 1 file changed, 67 insertions(+), 48 deletions(-) diff --git a/drivers/misc/habanalabs/gaudi/gaudi_security.c b/drivers/misc/habanalabs/gaudi/gaudi_security.c index cb265c00cf73..25ac87cebd45 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi_security.c +++ b/drivers/misc/habanalabs/gaudi/gaudi_security.c @@ -8,16 +8,21 @@ #include "gaudiP.h" #include "../include/gaudi/asic_reg/gaudi_regs.h" -#define GAUDI_NUMBER_OF_RR_REGS 24 -#define GAUDI_NUMBER_OF_LBW_RANGES 12 +#define GAUDI_NUMBER_OF_LBW_RR_REGS 28 +#define GAUDI_NUMBER_OF_HBW_RR_REGS 24 +#define GAUDI_NUMBER_OF_LBW_RANGES 10 -static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_HIT_WPROT, mmDMA_IF_W_S_DMA0_HIT_WPROT, mmDMA_IF_W_S_DMA1_HIT_WPROT, + mmDMA_IF_E_S_SOB_HIT_WPROT, mmDMA_IF_E_S_DMA0_HIT_WPROT, mmDMA_IF_E_S_DMA1_HIT_WPROT, + mmDMA_IF_W_N_SOB_HIT_WPROT, mmDMA_IF_W_N_DMA0_HIT_WPROT, mmDMA_IF_W_N_DMA1_HIT_WPROT, + mmDMA_IF_E_N_SOB_HIT_WPROT, mmDMA_IF_E_N_DMA0_HIT_WPROT, mmDMA_IF_E_N_DMA1_HIT_WPROT, mmSIF_RTR_0_LBW_RANGE_PROT_HIT_AW, @@ -38,13 +43,17 @@ static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_HIT_AW, }; -static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_HIT_RPROT, mmDMA_IF_W_S_DMA0_HIT_RPROT, mmDMA_IF_W_S_DMA1_HIT_RPROT, + mmDMA_IF_E_S_SOB_HIT_RPROT, mmDMA_IF_E_S_DMA0_HIT_RPROT, mmDMA_IF_E_S_DMA1_HIT_RPROT, + mmDMA_IF_W_N_SOB_HIT_RPROT, mmDMA_IF_W_N_DMA0_HIT_RPROT, mmDMA_IF_W_N_DMA1_HIT_RPROT, + mmDMA_IF_E_N_SOB_HIT_RPROT, mmDMA_IF_E_N_DMA0_HIT_RPROT, mmDMA_IF_E_N_DMA1_HIT_RPROT, mmSIF_RTR_0_LBW_RANGE_PROT_HIT_AR, @@ -65,13 +74,17 @@ static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_HIT_AR, }; -static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MIN_WPROT_0, mmDMA_IF_W_S_DMA0_MIN_WPROT_0, mmDMA_IF_W_S_DMA1_MIN_WPROT_0, + mmDMA_IF_E_S_SOB_MIN_WPROT_0, mmDMA_IF_E_S_DMA0_MIN_WPROT_0, mmDMA_IF_E_S_DMA1_MIN_WPROT_0, + mmDMA_IF_W_N_SOB_MIN_WPROT_0, mmDMA_IF_W_N_DMA0_MIN_WPROT_0, mmDMA_IF_W_N_DMA1_MIN_WPROT_0, + mmDMA_IF_E_N_SOB_MIN_WPROT_0, mmDMA_IF_E_N_DMA0_MIN_WPROT_0, mmDMA_IF_E_N_DMA1_MIN_WPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MIN_AW_0, @@ -92,13 +105,17 @@ static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MIN_AW_0, }; -static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MAX_WPROT_0, mmDMA_IF_W_S_DMA0_MAX_WPROT_0, mmDMA_IF_W_S_DMA1_MAX_WPROT_0, + mmDMA_IF_E_S_SOB_MAX_WPROT_0, mmDMA_IF_E_S_DMA0_MAX_WPROT_0, mmDMA_IF_E_S_DMA1_MAX_WPROT_0, + mmDMA_IF_W_N_SOB_MAX_WPROT_0, mmDMA_IF_W_N_DMA0_MAX_WPROT_0, mmDMA_IF_W_N_DMA1_MAX_WPROT_0, + mmDMA_IF_E_N_SOB_MAX_WPROT_0, mmDMA_IF_E_N_DMA0_MAX_WPROT_0, mmDMA_IF_E_N_DMA1_MAX_WPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MAX_AW_0, @@ -119,13 +136,17 @@ static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MAX_AW_0, }; -static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MIN_RPROT_0, mmDMA_IF_W_S_DMA0_MIN_RPROT_0, mmDMA_IF_W_S_DMA1_MIN_RPROT_0, + mmDMA_IF_E_S_SOB_MIN_RPROT_0, mmDMA_IF_E_S_DMA0_MIN_RPROT_0, mmDMA_IF_E_S_DMA1_MIN_RPROT_0, + mmDMA_IF_W_N_SOB_MIN_RPROT_0, mmDMA_IF_W_N_DMA0_MIN_RPROT_0, mmDMA_IF_W_N_DMA1_MIN_RPROT_0, + mmDMA_IF_E_N_SOB_MIN_RPROT_0, mmDMA_IF_E_N_DMA0_MIN_RPROT_0, mmDMA_IF_E_N_DMA1_MIN_RPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MIN_AR_0, @@ -146,13 +167,17 @@ static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MIN_AR_0, }; -static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MAX_RPROT_0, mmDMA_IF_W_S_DMA0_MAX_RPROT_0, mmDMA_IF_W_S_DMA1_MAX_RPROT_0, + mmDMA_IF_E_S_SOB_MAX_RPROT_0, mmDMA_IF_E_S_DMA0_MAX_RPROT_0, mmDMA_IF_E_S_DMA1_MAX_RPROT_0, + mmDMA_IF_W_N_SOB_MAX_RPROT_0, mmDMA_IF_W_N_DMA0_MAX_RPROT_0, mmDMA_IF_W_N_DMA1_MAX_RPROT_0, + mmDMA_IF_E_N_SOB_MAX_RPROT_0, mmDMA_IF_E_N_DMA0_MAX_RPROT_0, mmDMA_IF_E_N_DMA1_MAX_RPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MAX_AR_0, @@ -173,7 +198,7 @@ static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MAX_AR_0, }; -static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_HIT_AW, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_HIT_AW, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_HIT_AW, @@ -200,7 +225,7 @@ static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_HIT_AW }; -static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_HIT_AR, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_HIT_AR, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_HIT_AR, @@ -227,7 +252,7 @@ static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_HIT_AR }; -static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_LOW_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AW_0, @@ -254,7 +279,7 @@ static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_LOW_AW_0 }; -static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_HIGH_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AW_0, @@ -281,7 +306,7 @@ static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_HIGH_AW_0 }; -static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_LOW_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AW_0, @@ -308,7 +333,7 @@ static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_LOW_AW_0 }; -static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_HIGH_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AW_0, @@ -335,7 +360,7 @@ static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_HIGH_AW_0 }; -static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_LOW_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AR_0, @@ -362,7 +387,7 @@ static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_LOW_AR_0 }; -static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_HIGH_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AR_0, @@ -389,7 +414,7 @@ static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_HIGH_AR_0 }; -static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_LOW_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AR_0, @@ -416,7 +441,7 @@ static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_LOW_AR_0 }; -static u64 gaudi_rr_hbw_mask_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_high_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_HIGH_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AR_0, @@ -12849,50 +12874,44 @@ static void gaudi_init_range_registers_lbw(struct hl_device *hdev) u32 lbw_rng_end[GAUDI_NUMBER_OF_LBW_RANGES]; int i, j; - lbw_rng_start[0] = (0xFBFE0000 & 0x3FFFFFF) - 1; - lbw_rng_end[0] = (0xFBFFF000 & 0x3FFFFFF) + 1; + lbw_rng_start[0] = (0xFC0E8000 & 0x3FFFFFF) - 1; /* 0x000E7FFF */ + lbw_rng_end[0] = (0xFC11FFFF & 0x3FFFFFF) + 1; /* 0x00120000 */ - lbw_rng_start[1] = (0xFC0E8000 & 0x3FFFFFF) - 1; - lbw_rng_end[1] = (0xFC120000 & 0x3FFFFFF) + 1; + lbw_rng_start[1] = (0xFC1E8000 & 0x3FFFFFF) - 1; /* 0x001E7FFF */ + lbw_rng_end[1] = (0xFC48FFFF & 0x3FFFFFF) + 1; /* 0x00490000 */ - lbw_rng_start[2] = (0xFC1E8000 & 0x3FFFFFF) - 1; - lbw_rng_end[2] = (0xFC48FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[2] = (0xFC600000 & 0x3FFFFFF) - 1; /* 0x005FFFFF */ + lbw_rng_end[2] = (0xFCC48FFF & 0x3FFFFFF) + 1; /* 0x00C49000 */ - lbw_rng_start[3] = (0xFC600000 & 0x3FFFFFF) - 1; - lbw_rng_end[3] = (0xFCC48FFF & 0x3FFFFFF) + 1; + lbw_rng_start[3] = (0xFCC4A000 & 0x3FFFFFF) - 1; /* 0x00C49FFF */ + lbw_rng_end[3] = (0xFCCDFFFF & 0x3FFFFFF) + 1; /* 0x00CE0000 */ - lbw_rng_start[4] = (0xFCC4A000 & 0x3FFFFFF) - 1; - lbw_rng_end[4] = (0xFCCDFFFF & 0x3FFFFFF) + 1; + lbw_rng_start[4] = (0xFCCE4000 & 0x3FFFFFF) - 1; /* 0x00CE3FFF */ + lbw_rng_end[4] = (0xFCD1FFFF & 0x3FFFFFF) + 1; /* 0x00D20000 */ - lbw_rng_start[5] = (0xFCCE4000 & 0x3FFFFFF) - 1; - lbw_rng_end[5] = (0xFCD1FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[5] = (0xFCD24000 & 0x3FFFFFF) - 1; /* 0x00D23FFF */ + lbw_rng_end[5] = (0xFCD5FFFF & 0x3FFFFFF) + 1; /* 0x00D60000 */ - lbw_rng_start[6] = (0xFCD24000 & 0x3FFFFFF) - 1; - lbw_rng_end[6] = (0xFCD5FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[6] = (0xFCD64000 & 0x3FFFFFF) - 1; /* 0x00D63FFF */ + lbw_rng_end[6] = (0xFCD9FFFF & 0x3FFFFFF) + 1; /* 0x00DA0000 */ - lbw_rng_start[7] = (0xFCD64000 & 0x3FFFFFF) - 1; - lbw_rng_end[7] = (0xFCD9FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[7] = (0xFCDA4000 & 0x3FFFFFF) - 1; /* 0x00DA3FFF */ + lbw_rng_end[7] = (0xFCDDFFFF & 0x3FFFFFF) + 1; /* 0x00DE0000 */ - lbw_rng_start[8] = (0xFCDA4000 & 0x3FFFFFF) - 1; - lbw_rng_end[8] = (0xFCDDFFFF & 0x3FFFFFF) + 1; + lbw_rng_start[8] = (0xFCDE4000 & 0x3FFFFFF) - 1; /* 0x00DE3FFF */ + lbw_rng_end[8] = (0xFCE05FFF & 0x3FFFFFF) + 1; /* 0x00E06000 */ - lbw_rng_start[9] = (0xFCDE4000 & 0x3FFFFFF) - 1; - lbw_rng_end[9] = (0xFCE05FFF & 0x3FFFFFF) + 1; + lbw_rng_start[9] = (0xFCFC9000 & 0x3FFFFFF) - 1; /* 0x00FC8FFF */ + lbw_rng_end[9] = (0xFFFFFFFE & 0x3FFFFFF) + 1; /* 0x03FFFFFF */ - lbw_rng_start[10] = (0xFEC43000 & 0x3FFFFFF) - 1; - lbw_rng_end[10] = (0xFEC43FFF & 0x3FFFFFF) + 1; - - lbw_rng_start[11] = (0xFE484000 & 0x3FFFFFF) - 1; - lbw_rng_end[11] = (0xFE484FFF & 0x3FFFFFF) + 1; - - for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_LBW_RR_REGS ; i++) { WREG32(gaudi_rr_lbw_hit_aw_regs[i], (1 << GAUDI_NUMBER_OF_LBW_RANGES) - 1); WREG32(gaudi_rr_lbw_hit_ar_regs[i], (1 << GAUDI_NUMBER_OF_LBW_RANGES) - 1); } - for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) + for (i = 0 ; i < GAUDI_NUMBER_OF_LBW_RR_REGS ; i++) for (j = 0 ; j < GAUDI_NUMBER_OF_LBW_RANGES ; j++) { WREG32(gaudi_rr_lbw_min_aw_regs[i] + (j << 2), lbw_rng_start[j]); @@ -12939,12 +12958,12 @@ static void gaudi_init_range_registers_hbw(struct hl_device *hdev) * 6th range is the host */ - for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_HBW_RR_REGS ; i++) { WREG32(gaudi_rr_hbw_hit_aw_regs[i], 0x1F); WREG32(gaudi_rr_hbw_hit_ar_regs[i], 0x1D); } - for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_HBW_RR_REGS ; i++) { WREG32(gaudi_rr_hbw_base_low_aw_regs[i], dram_addr_lo); WREG32(gaudi_rr_hbw_base_low_ar_regs[i], dram_addr_lo); -- cgit From 3d3200ae167ba048a29e0c815987a3fdc90fc8d2 Mon Sep 17 00:00:00 2001 From: Ofir Bitton Date: Thu, 9 Sep 2021 09:56:37 +0300 Subject: habanalabs: rate limit multi CS completion errors As user can send wrong arguments to multi CS API, we rate limit the amount of errors dumped to dmesg, in addition we change the severity to warning. Signed-off-by: Ofir Bitton Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/common/command_submission.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index 5b7de857fbc1..a4ed91ed991d 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -2630,7 +2630,8 @@ static int hl_multi_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data) * completed after the poll function. */ if (!mcs_data.completion_bitmap) { - dev_err(hdev->dev, "Multi-CS got completion on wait but no CS completed\n"); + dev_warn_ratelimited(hdev->dev, + "Multi-CS got completion on wait but no CS completed\n"); rc = -EFAULT; } } -- cgit From 42254c2a4991b98ca3f86040a1a7b7b32a0c8c4a Mon Sep 17 00:00:00 2001 From: farah kassabri Date: Sun, 12 Sep 2021 14:30:35 +0300 Subject: habanalabs: fix wait offset handling Add handling for case where the user doesn't set wait offset, and keeps it as 0. In such a case the driver will decrement one from this zero value which will cause the code to wait for wrong number of signals. The solution is to treat this case as in legacy wait cs, and wait for the next signal. Signed-off-by: farah kassabri Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/common/hw_queue.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/misc/habanalabs/common/hw_queue.c b/drivers/misc/habanalabs/common/hw_queue.c index 76b7de8f1406..0743319b10c7 100644 --- a/drivers/misc/habanalabs/common/hw_queue.c +++ b/drivers/misc/habanalabs/common/hw_queue.c @@ -437,6 +437,7 @@ void hl_hw_queue_encaps_sig_set_sob_info(struct hl_device *hdev, struct hl_cs_compl *cs_cmpl) { struct hl_cs_encaps_sig_handle *handle = cs->encaps_sig_hdl; + u32 offset = 0; cs_cmpl->hw_sob = handle->hw_sob; @@ -446,9 +447,13 @@ void hl_hw_queue_encaps_sig_set_sob_info(struct hl_device *hdev, * set offset 1 for example he mean to wait only for the first * signal only, which will be pre_sob_val, and if he set offset 2 * then the value required is (pre_sob_val + 1) and so on... + * if user set wait offset to 0, then treat it as legacy wait cs, + * wait for the next signal. */ - cs_cmpl->sob_val = handle->pre_sob_val + - (job->encaps_sig_wait_offset - 1); + if (job->encaps_sig_wait_offset) + offset = job->encaps_sig_wait_offset - 1; + + cs_cmpl->sob_val = handle->pre_sob_val + offset; } static int init_wait_cs(struct hl_device *hdev, struct hl_cs *cs, -- cgit From c8fee41957f036cbc8e840bd91e2087731df7f7e Mon Sep 17 00:00:00 2001 From: Ofir Bitton Date: Sun, 12 Sep 2021 15:49:00 +0300 Subject: habanalabs: expose a single cs seq in staged submissions Staged submission consists of multiple command submissions. In order to be explicit, driver should return a single cs sequence for every cs in the submission, or else user may try to wait on an internal CS rather than waiting for the whole submission. Signed-off-by: Ofir Bitton Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/common/command_submission.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index a4ed91ed991d..91b57544f7c6 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -1295,6 +1295,12 @@ static int cs_ioctl_default(struct hl_fpriv *hpriv, void __user *chunks, if (rc) goto free_cs_object; + /* If this is a staged submission we must return the staged sequence + * rather than the internal CS sequence + */ + if (cs->staged_cs) + *cs_seq = cs->staged_sequence; + /* Validate ALL the CS chunks before submitting the CS */ for (i = 0 ; i < num_chunks ; i++) { struct hl_cs_chunk *chunk = &cs_chunk_array[i]; -- cgit From 8b4bd256674720709a9d858a219fcac6f2f253b5 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 9 Sep 2021 10:56:12 +0200 Subject: thermal/drivers/int340x: Do not set a wrong tcc offset on resume After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due to overheat (when it should not). It turned out this was due to commit fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting"). What happens is this drivers uses a global variable to keep track of the tcc offset (tcc_offset_save) and uses it on resume. The issue is this variable is initialized to 0, but is only set in tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly set by userspace. If that does not happen, the resume path will set the offset to 0 (in my case the h/w default being 3, the offset would become too low after a suspend/resume cycle). The issue did not arise before commit fe6a6de6692e, as the function setting the offset would return if the offset was 0. This is no longer the case (rightfully). Fix this by not applying the offset if it wasn't saved before, reverting back to the old logic. A better approach will come later, but this will be easier to apply to stable kernels. The logic to restore the offset after a resume was there long before commit fe6a6de6692e, but as a value of 0 was considered invalid I'm referencing the commit that made the issue possible in the Fixes tag instead. Fixes: fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting") Cc: stable@vger.kernel.org Cc: Srinivas Pandruvada Signed-off-by: Antoine Tenart Signed-off-by: Daniel Lezcano Reviewed-by: Srinivas Pandruvada Tested-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20210909085613.5577-2-atenart@kernel.org --- drivers/thermal/intel/int340x_thermal/processor_thermal_device.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c index 0f0038af2ad4..fb64acfd5e07 100644 --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c @@ -107,7 +107,7 @@ static int tcc_offset_update(unsigned int tcc) return 0; } -static unsigned int tcc_offset_save; +static int tcc_offset_save = -1; static ssize_t tcc_offset_degree_celsius_store(struct device *dev, struct device_attribute *attr, const char *buf, @@ -352,7 +352,8 @@ int proc_thermal_resume(struct device *dev) proc_dev = dev_get_drvdata(dev); proc_thermal_read_ppcc(proc_dev); - tcc_offset_update(tcc_offset_save); + if (tcc_offset_save >= 0) + tcc_offset_update(tcc_offset_save); return 0; } -- cgit From 356ed64991c6847a0c4f2e8fa3b1133f7a14f1fc Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Tue, 14 Sep 2021 10:33:51 +0800 Subject: bpf: Handle return value of BPF_PROG_TYPE_STRUCT_OPS prog Currently if a function ptr in struct_ops has a return value, its caller will get a random return value from it, because the return value of related BPF_PROG_TYPE_STRUCT_OPS prog is just dropped. So adding a new flag BPF_TRAMP_F_RET_FENTRY_RET to tell bpf trampoline to save and return the return value of struct_ops prog if ret_size of the function ptr is greater than 0. Also restricting the flag to be used alone. Fixes: 85d33df357b6 ("bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS") Signed-off-by: Hou Tao Signed-off-by: Alexei Starovoitov Acked-by: Martin KaFai Lau Link: https://lore.kernel.org/bpf/20210914023351.3664499-1-houtao1@huawei.com --- arch/x86/net/bpf_jit_comp.c | 53 ++++++++++++++++++++++++++++++++++----------- include/linux/bpf.h | 3 ++- kernel/bpf/bpf_struct_ops.c | 7 ++++-- 3 files changed, 47 insertions(+), 16 deletions(-) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 0fe6aacef3db..d24a512fd6f3 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -1744,7 +1744,7 @@ static void restore_regs(const struct btf_func_model *m, u8 **prog, int nr_args, } static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog, - struct bpf_prog *p, int stack_size, bool mod_ret) + struct bpf_prog *p, int stack_size, bool save_ret) { u8 *prog = *pprog; u8 *jmp_insn; @@ -1777,11 +1777,15 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog, if (emit_call(&prog, p->bpf_func, prog)) return -EINVAL; - /* BPF_TRAMP_MODIFY_RETURN trampolines can modify the return + /* + * BPF_TRAMP_MODIFY_RETURN trampolines can modify the return * of the previous call which is then passed on the stack to * the next BPF program. + * + * BPF_TRAMP_FENTRY trampoline may need to return the return + * value of BPF_PROG_TYPE_STRUCT_OPS prog. */ - if (mod_ret) + if (save_ret) emit_stx(&prog, BPF_DW, BPF_REG_FP, BPF_REG_0, -8); /* replace 2 nops with JE insn, since jmp target is known */ @@ -1828,13 +1832,15 @@ static int emit_cond_near_jump(u8 **pprog, void *func, void *ip, u8 jmp_cond) } static int invoke_bpf(const struct btf_func_model *m, u8 **pprog, - struct bpf_tramp_progs *tp, int stack_size) + struct bpf_tramp_progs *tp, int stack_size, + bool save_ret) { int i; u8 *prog = *pprog; for (i = 0; i < tp->nr_progs; i++) { - if (invoke_bpf_prog(m, &prog, tp->progs[i], stack_size, false)) + if (invoke_bpf_prog(m, &prog, tp->progs[i], stack_size, + save_ret)) return -EINVAL; } *pprog = prog; @@ -1877,6 +1883,23 @@ static int invoke_bpf_mod_ret(const struct btf_func_model *m, u8 **pprog, return 0; } +static bool is_valid_bpf_tramp_flags(unsigned int flags) +{ + if ((flags & BPF_TRAMP_F_RESTORE_REGS) && + (flags & BPF_TRAMP_F_SKIP_FRAME)) + return false; + + /* + * BPF_TRAMP_F_RET_FENTRY_RET is only used by bpf_struct_ops, + * and it must be used alone. + */ + if ((flags & BPF_TRAMP_F_RET_FENTRY_RET) && + (flags & ~BPF_TRAMP_F_RET_FENTRY_RET)) + return false; + + return true; +} + /* Example: * __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev); * its 'struct btf_func_model' will be nr_args=2 @@ -1949,17 +1972,19 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i struct bpf_tramp_progs *fmod_ret = &tprogs[BPF_TRAMP_MODIFY_RETURN]; u8 **branches = NULL; u8 *prog; + bool save_ret; /* x86-64 supports up to 6 arguments. 7+ can be added in the future */ if (nr_args > 6) return -ENOTSUPP; - if ((flags & BPF_TRAMP_F_RESTORE_REGS) && - (flags & BPF_TRAMP_F_SKIP_FRAME)) + if (!is_valid_bpf_tramp_flags(flags)) return -EINVAL; - if (flags & BPF_TRAMP_F_CALL_ORIG) - stack_size += 8; /* room for return value of orig_call */ + /* room for return value of orig_call or fentry prog */ + save_ret = flags & (BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_RET_FENTRY_RET); + if (save_ret) + stack_size += 8; if (flags & BPF_TRAMP_F_IP_ARG) stack_size += 8; /* room for IP address argument */ @@ -2005,7 +2030,8 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i } if (fentry->nr_progs) - if (invoke_bpf(m, &prog, fentry, stack_size)) + if (invoke_bpf(m, &prog, fentry, stack_size, + flags & BPF_TRAMP_F_RET_FENTRY_RET)) return -EINVAL; if (fmod_ret->nr_progs) { @@ -2052,7 +2078,7 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i } if (fexit->nr_progs) - if (invoke_bpf(m, &prog, fexit, stack_size)) { + if (invoke_bpf(m, &prog, fexit, stack_size, false)) { ret = -EINVAL; goto cleanup; } @@ -2072,9 +2098,10 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i ret = -EINVAL; goto cleanup; } - /* restore original return value back into RAX */ - emit_ldx(&prog, BPF_DW, BPF_REG_0, BPF_REG_FP, -8); } + /* restore return value of orig_call or fentry prog back into RAX */ + if (save_ret) + emit_ldx(&prog, BPF_DW, BPF_REG_0, BPF_REG_FP, -8); EMIT1(0x5B); /* pop rbx */ EMIT1(0xC9); /* leave */ diff --git a/include/linux/bpf.h b/include/linux/bpf.h index f4c16f19f83e..020a7d5bf470 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -578,11 +578,12 @@ struct btf_func_model { * programs only. Should not be used with normal calls and indirect calls. */ #define BPF_TRAMP_F_SKIP_FRAME BIT(2) - /* Store IP address of the caller on the trampoline stack, * so it's available for trampoline's programs. */ #define BPF_TRAMP_F_IP_ARG BIT(3) +/* Return the return value of fentry prog. Only used by bpf_struct_ops. */ +#define BPF_TRAMP_F_RET_FENTRY_RET BIT(4) /* Each call __bpf_prog_enter + call bpf_func + call __bpf_prog_exit is ~50 * bytes on x86. Pick a number to fit into BPF_IMAGE_SIZE / 2 diff --git a/kernel/bpf/bpf_struct_ops.c b/kernel/bpf/bpf_struct_ops.c index d6731c32864e..9abcc33f02cf 100644 --- a/kernel/bpf/bpf_struct_ops.c +++ b/kernel/bpf/bpf_struct_ops.c @@ -368,6 +368,7 @@ static int bpf_struct_ops_map_update_elem(struct bpf_map *map, void *key, const struct btf_type *mtype, *ptype; struct bpf_prog *prog; u32 moff; + u32 flags; moff = btf_member_bit_offset(t, member) / 8; ptype = btf_type_resolve_ptr(btf_vmlinux, member->type, NULL); @@ -431,10 +432,12 @@ static int bpf_struct_ops_map_update_elem(struct bpf_map *map, void *key, tprogs[BPF_TRAMP_FENTRY].progs[0] = prog; tprogs[BPF_TRAMP_FENTRY].nr_progs = 1; + flags = st_ops->func_models[i].ret_size > 0 ? + BPF_TRAMP_F_RET_FENTRY_RET : 0; err = arch_prepare_bpf_trampoline(NULL, image, st_map->image + PAGE_SIZE, - &st_ops->func_models[i], 0, - tprogs, NULL); + &st_ops->func_models[i], + flags, tprogs, NULL); if (err < 0) goto reset_unlock; -- cgit From 2cc74e1ee31d00393b6698ec80b322fd26523da4 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 8 Sep 2021 13:43:28 +0200 Subject: IB/cma: Do not send IGMP leaves for sendonly Multicast groups ROCE uses IGMP for Multicast instead of the native Infiniband system where joins are required in order to post messages on the Multicast group. On Ethernet one can send Multicast messages to arbitrary addresses without the need to subscribe to a group. So ROCE correctly does not send IGMP joins during rdma_join_multicast(). F.e. in cma_iboe_join_multicast() we see: if (addr->sa_family == AF_INET) { if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) { ib.rec.hop_limit = IPV6_DEFAULT_HOPLIMIT; if (!send_only) { err = cma_igmp_send(ndev, &ib.rec.mgid, true); } } } else { So the IGMP join is suppressed as it is unnecessary. However no such check is done in destroy_mc(). And therefore leaving a sendonly multicast group will send an IGMP leave. This means that the following scenario can lead to a multicast receiver unexpectedly being unsubscribed from a MC group: 1. Sender thread does a sendonly join on MC group X. No IGMP join is sent. 2. Receiver thread does a regular join on the same MC Group x. IGMP join is sent and the receiver begins to get messages. 3. Sender thread terminates and destroys MC group X. IGMP leave is sent and the receiver no longer receives data. This patch adds the same logic for sendonly joins to destroy_mc() that is also used in cma_iboe_join_multicast(). Fixes: ab15c95a17b3 ("IB/core: Support for CMA multicast join flags") Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2109081340540.668072@gentwo.de Signed-off-by: Christoph Lameter Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cma.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index c40791baced5..86ee3b01b3ee 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1810,6 +1810,8 @@ static void cma_release_port(struct rdma_id_private *id_priv) static void destroy_mc(struct rdma_id_private *id_priv, struct cma_multicast *mc) { + bool send_only = mc->join_state == BIT(SENDONLY_FULLMEMBER_JOIN); + if (rdma_cap_ib_mcast(id_priv->id.device, id_priv->id.port_num)) ib_sa_free_multicast(mc->sa_mc); @@ -1826,7 +1828,10 @@ static void destroy_mc(struct rdma_id_private *id_priv, cma_set_mgid(id_priv, (struct sockaddr *)&mc->addr, &mgid); - cma_igmp_send(ndev, &mgid, false); + + if (!send_only) + cma_igmp_send(ndev, &mgid, false); + dev_put(ndev); } -- cgit From 0d818706130e2f4e828c3fc028917677fac76a09 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 13 Sep 2021 06:38:36 -0400 Subject: virtio: don't fail on !of_device_is_compatible A recent change checking of_device_is_compatible on probe broke some powerpc/pseries setups. Apparently there virtio devices do not have a "compatible" property - they are matched by PCI vendor/device ids. Let's just skip of_node setup but proceed with initialization like we did previously. Fixes: 694a1116b405 ("virtio: Bind virtio device to device-tree node") Reported-by: Alexey Kardashevskiy Cc: Arnd Bergmann Cc: Viresh Kumar Tested-by: Guenter Roeck Acked-by: Jason Wang Reviewed-by: Viresh Kumar Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 588e02fb91d3..0a5b54034d4b 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -345,8 +345,13 @@ static int virtio_device_of_init(struct virtio_device *dev) ret = snprintf(compat, sizeof(compat), "virtio,device%x", dev->id.device); BUG_ON(ret >= sizeof(compat)); + /* + * On powerpc/pseries virtio devices are PCI devices so PCI + * vendor/device ids play the role of the "compatible" property. + * Simply don't init of_node in this case. + */ if (!of_device_is_compatible(np, compat)) { - ret = -EINVAL; + ret = 0; goto out; } -- cgit From 6243e3c78ace66d337a1e43b60a1aa8f5b61bd72 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 7 Sep 2021 10:32:24 +0300 Subject: vduse: missing error code in vduse_init() This should return -ENOMEM if alloc_workqueue() fails. Currently it returns success. Fixes: b66219796563 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210907073223.GA18254@kili Signed-off-by: Michael S. Tsirkin Reviewed-by: Xie Yongji Acked-by: Jason Wang --- drivers/vdpa/vdpa_user/vduse_dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/vdpa/vdpa_user/vduse_dev.c b/drivers/vdpa/vdpa_user/vduse_dev.c index 29a38ecba19e..e36287feac0e 100644 --- a/drivers/vdpa/vdpa_user/vduse_dev.c +++ b/drivers/vdpa/vdpa_user/vduse_dev.c @@ -1593,8 +1593,10 @@ static int vduse_init(void) vduse_irq_wq = alloc_workqueue("vduse-irq", WQ_HIGHPRI | WQ_SYSFS | WQ_UNBOUND, 0); - if (!vduse_irq_wq) + if (!vduse_irq_wq) { + ret = -ENOMEM; goto err_wq; + } ret = vduse_domain_init(); if (ret) -- cgit From 7bb5fb207334758ce6ee84345d6f08e4fb284fe6 Mon Sep 17 00:00:00 2001 From: Xie Yongji Date: Mon, 6 Sep 2021 22:21:58 +0800 Subject: vduse: Cleanup the old kernel states after reset failure We should cleanup the old kernel states e.g. interrupt callback no matter whether the userspace handle the reset correctly or not since virtio-vdpa can't handle the reset failure now. Otherwise, the old state might be used after reset which might break something, e.g. the old interrupt callback might be triggered by userspace after reset, which can break the virtio device driver. Signed-off-by: Xie Yongji Link: https://lore.kernel.org/r/20210906142158.181-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/vdpa_user/vduse_dev.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/vdpa/vdpa_user/vduse_dev.c b/drivers/vdpa/vdpa_user/vduse_dev.c index e36287feac0e..26e3d90d1e7c 100644 --- a/drivers/vdpa/vdpa_user/vduse_dev.c +++ b/drivers/vdpa/vdpa_user/vduse_dev.c @@ -665,13 +665,11 @@ static void vduse_vdpa_set_config(struct vdpa_device *vdpa, unsigned int offset, static int vduse_vdpa_reset(struct vdpa_device *vdpa) { struct vduse_dev *dev = vdpa_to_vduse(vdpa); - - if (vduse_dev_set_status(dev, 0)) - return -EIO; + int ret = vduse_dev_set_status(dev, 0); vduse_dev_reset(dev); - return 0; + return ret; } static u32 vduse_vdpa_get_generation(struct vdpa_device *vdpa) -- cgit From ef12e4bf4276a07fd350179fa63d0d337ea0a867 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 9 Sep 2021 09:36:52 +0300 Subject: vdpa/mlx5: Clear ready indication for control VQ When clearing VQs ready indication for the data VQs, do the same for the control VQ. Fixes: 5262912ef3cf ("vdpa/mlx5: Add support for control VQ and MAC setting") Signed-off-by: Eli Cohen Link: https://lore.kernel.org/r/20210909063652.46880-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c index 294ba05e6fc9..64dfd0f500d2 100644 --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c @@ -2145,6 +2145,8 @@ static void clear_vqs_ready(struct mlx5_vdpa_net *ndev) for (i = 0; i < ndev->mvdev.max_vqs; i++) ndev->vqs[i].ready = false; + + ndev->mvdev.cvq.ready = false; } static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status) -- cgit From 759be8993b1b40e05b8908583336b8e230e67b08 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 9 Sep 2021 09:37:38 +0300 Subject: vdpa/mlx5: Avoid executing set_vq_ready() if device is reset Avoid executing set_vq_ready() if the device has been reset. In such case, the features are cleared and cannot be used in conditional statements. Such reference happens is the function ctrl_vq_idx(). Fixes: 52893733f2c5 ("vdpa/mlx5: Add multiqueue support") Signed-off-by: Eli Cohen Link: https://lore.kernel.org/r/20210909063738.46970-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/mlx5/net/mlx5_vnet.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c index 64dfd0f500d2..bd56de7484dc 100644 --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c @@ -1714,6 +1714,9 @@ static void mlx5_vdpa_set_vq_ready(struct vdpa_device *vdev, u16 idx, bool ready struct mlx5_vdpa_net *ndev = to_mlx5_vdpa_ndev(mvdev); struct mlx5_vdpa_virtqueue *mvq; + if (!mvdev->actual_features) + return; + if (!is_index_valid(mvdev, idx)) return; -- cgit From be9c6bad9b46451ba5bb8d366c51e2475f374981 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 7 Sep 2021 10:32:53 +0300 Subject: vdpa: potential uninitialized return in vhost_vdpa_va_map() The concern here is that "ret" can be uninitialized if we hit the "goto next" condition on every iteration through the loop. Fixes: 41ba1b5f9d4b ("vdpa: Support transferring virtual addressing during DMA mapping") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210907073253.GB18254@kili Signed-off-by: Michael S. Tsirkin Reviewed-by: Xie Yongji Acked-by: Jason Wang Reviewed-by: Stefano Garzarella --- drivers/vhost/vdpa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c index f41d081777f5..35927ceb26ff 100644 --- a/drivers/vhost/vdpa.c +++ b/drivers/vhost/vdpa.c @@ -640,7 +640,7 @@ static int vhost_vdpa_va_map(struct vhost_vdpa *v, u64 offset, map_size, map_iova = iova; struct vdpa_map_file *map_file; struct vm_area_struct *vma; - int ret; + int ret = 0; mmap_read_lock(dev->mm); -- cgit From ac4dfccb96571ca03af7cac64b7a0b2952c97f3a Mon Sep 17 00:00:00 2001 From: Yong Zhi Date: Wed, 15 Sep 2021 09:32:30 +0300 Subject: ASoC: SOF: Fix DSP oops stack dump output contents Fix @buf arg given to hex_dump_to_buffer() and stack address used in dump error output. Fixes: e657c18a01c8 ('ASoC: SOF: Add xtensa support') Signed-off-by: Yong Zhi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Daniel Baluta Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20210915063230.29711-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/xtensa/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/xtensa/core.c b/sound/soc/sof/xtensa/core.c index bbb9a2282ed9..f6e3411b33cf 100644 --- a/sound/soc/sof/xtensa/core.c +++ b/sound/soc/sof/xtensa/core.c @@ -122,9 +122,9 @@ static void xtensa_stack(struct snd_sof_dev *sdev, void *oops, u32 *stack, * 0x0049fbb0: 8000f2d0 0049fc00 6f6c6c61 00632e63 */ for (i = 0; i < stack_words; i += 4) { - hex_dump_to_buffer(stack + i * 4, 16, 16, 4, + hex_dump_to_buffer(stack + i, 16, 16, 4, buf, sizeof(buf), false); - dev_err(sdev->dev, "0x%08x: %s\n", stack_ptr + i, buf); + dev_err(sdev->dev, "0x%08x: %s\n", stack_ptr + i * 4, buf); } } -- cgit From 1e4ce418b1cb1a810256b5fb3fd33d22d1325993 Mon Sep 17 00:00:00 2001 From: "F.A.Sulaiman" Date: Tue, 24 Aug 2021 20:37:30 +0530 Subject: HID: betop: fix slab-out-of-bounds Write in betop_probe Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver. The problem is the driver assumes the device must have an input report but some malicious devices violate this assumption. So this patch checks hid_device's input is non empty before it's been used. Reported-by: syzbot+07efed3bc5a1407bd742@syzkaller.appspotmail.com Signed-off-by: F.A. SULAIMAN Reviewed-by: Pavel Skripkin Signed-off-by: Jiri Kosina --- drivers/hid/hid-betopff.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/hid/hid-betopff.c b/drivers/hid/hid-betopff.c index 0790fbd3fc9a..467d789f9bc2 100644 --- a/drivers/hid/hid-betopff.c +++ b/drivers/hid/hid-betopff.c @@ -56,15 +56,22 @@ static int betopff_init(struct hid_device *hid) { struct betopff_device *betopff; struct hid_report *report; - struct hid_input *hidinput = - list_first_entry(&hid->inputs, struct hid_input, list); + struct hid_input *hidinput; struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; - struct input_dev *dev = hidinput->input; + struct input_dev *dev; int field_count = 0; int error; int i, j; + if (list_empty(&hid->inputs)) { + hid_err(hid, "no inputs found\n"); + return -ENODEV; + } + + hidinput = list_first_entry(&hid->inputs, struct hid_input, list); + dev = hidinput->input; + if (list_empty(report_list)) { hid_err(hid, "no output reports found\n"); return -ENODEV; -- cgit From ca465e1f1f9b38fe916a36f7d80c5d25f2337c81 Mon Sep 17 00:00:00 2001 From: Tao Liu Date: Mon, 13 Sep 2021 17:33:44 +0800 Subject: RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure If cma_listen_on_all() fails it leaves the per-device ID still on the listen_list but the state is not set to RDMA_CM_ADDR_BOUND. When the cmid is eventually destroyed cma_cancel_listens() is not called due to the wrong state, however the per-device IDs are still holding the refcount preventing the ID from being destroyed, thus deadlocking: task:rping state:D stack: 0 pid:19605 ppid: 47036 flags:0x00000084 Call Trace: __schedule+0x29a/0x780 ? free_unref_page_commit+0x9b/0x110 schedule+0x3c/0xa0 schedule_timeout+0x215/0x2b0 ? __flush_work+0x19e/0x1e0 wait_for_completion+0x8d/0xf0 _destroy_id+0x144/0x210 [rdma_cm] ucma_close_id+0x2b/0x40 [rdma_ucm] __destroy_id+0x93/0x2c0 [rdma_ucm] ? __xa_erase+0x4a/0xa0 ucma_destroy_id+0x9a/0x120 [rdma_ucm] ucma_write+0xb8/0x130 [rdma_ucm] vfs_write+0xb4/0x250 ksys_write+0xb5/0xd0 ? syscall_trace_enter.isra.19+0x123/0x190 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Ensure that cma_listen_on_all() atomically unwinds its action under the lock during error. Fixes: c80a0c52d85c ("RDMA/cma: Add missing error handling of listen_id") Link: https://lore.kernel.org/r/20210913093344.17230-1-thomas.liu@ucloud.cn Signed-off-by: Tao Liu Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cma.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 86ee3b01b3ee..5aa58897965d 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1746,15 +1746,16 @@ static void cma_cancel_route(struct rdma_id_private *id_priv) } } -static void cma_cancel_listens(struct rdma_id_private *id_priv) +static void _cma_cancel_listens(struct rdma_id_private *id_priv) { struct rdma_id_private *dev_id_priv; + lockdep_assert_held(&lock); + /* * Remove from listen_any_list to prevent added devices from spawning * additional listen requests. */ - mutex_lock(&lock); list_del(&id_priv->list); while (!list_empty(&id_priv->listen_list)) { @@ -1768,6 +1769,12 @@ static void cma_cancel_listens(struct rdma_id_private *id_priv) rdma_destroy_id(&dev_id_priv->id); mutex_lock(&lock); } +} + +static void cma_cancel_listens(struct rdma_id_private *id_priv) +{ + mutex_lock(&lock); + _cma_cancel_listens(id_priv); mutex_unlock(&lock); } @@ -2579,7 +2586,7 @@ static int cma_listen_on_all(struct rdma_id_private *id_priv) return 0; err_listen: - list_del(&id_priv->list); + _cma_cancel_listens(id_priv); mutex_unlock(&lock); if (to_destroy) rdma_destroy_id(&to_destroy->id); -- cgit From 67fd71ba16a37c663d139f5ba5296f344d80d072 Mon Sep 17 00:00:00 2001 From: Mizuho Mori Date: Thu, 29 Jul 2021 20:03:25 +0900 Subject: HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Apple Magic Keyboard(JIS)'s Logical Maximum and Usage Maximum are wrong. Below is a report descriptor. 0x05, 0x01, /* Usage Page (Desktop), */ 0x09, 0x06, /* Usage (Keyboard), */ 0xA1, 0x01, /* Collection (Application), */ 0x85, 0x01, /* Report ID (1), */ 0x05, 0x07, /* Usage Page (Keyboard), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ 0x19, 0xE0, /* Usage Minimum (KB Leftcontrol), */ 0x29, 0xE7, /* Usage Maximum (KB Right GUI), */ 0x75, 0x01, /* Report Size (1), */ 0x95, 0x08, /* Report Count (8), */ 0x81, 0x02, /* Input (Variable), */ 0x95, 0x05, /* Report Count (5), */ 0x75, 0x01, /* Report Size (1), */ 0x05, 0x08, /* Usage Page (LED), */ 0x19, 0x01, /* Usage Minimum (01h), */ 0x29, 0x05, /* Usage Maximum (05h), */ 0x91, 0x02, /* Output (Variable), */ 0x95, 0x01, /* Report Count (1), */ 0x75, 0x03, /* Report Size (3), */ 0x91, 0x03, /* Output (Constant, Variable), */ 0x95, 0x08, /* Report Count (8), */ 0x75, 0x01, /* Report Size (1), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ here is a report descriptor which is parsed one in kernel. see sys/kernel/debug/hid//rdesc 05 01 09 06 a1 01 85 01 05 07 15 00 25 01 19 e0 29 e7 75 01 95 08 81 02 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 08 75 01 15 00 25 01 06 00 ff 09 03 81 03 95 06 75 08 15 00 25 [65] 05 07 19 00 29 [65] 81 00 95 01 75 01 15 00 25 01 05 0c 09 b8 81 02 95 01 75 01 06 01 ff 09 03 81 02 95 01 75 06 81 03 06 02 ff 09 55 85 55 15 00 26 ff 00 75 08 95 40 b1 a2 c0 06 00 ff 09 14 a1 01 85 90 05 84 75 01 95 03 15 00 25 01 09 61 05 85 09 44 09 46 81 02 95 05 81 01 75 08 95 01 15 00 26 ff 00 09 65 81 02 c0 00 Position 64(Logical Maximum) and 70(Usage Maximum) are 101. Both should be 0xE7 to support JIS specific keys(ろ, Eisu, Kana, |) support. position 117 is also 101 but not related(it is Usage 65h). There are no difference of product id between JIS and ANSI. They are same 0x0267. Signed-off-by: Mizuho Mori Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 833fcf07ff35..6ccfa0cb997a 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -336,12 +336,19 @@ static int apple_event(struct hid_device *hdev, struct hid_field *field, /* * MacBook JIS keyboard has wrong logical maximum + * Magic Keyboard JIS has wrong logical maximum */ static __u8 *apple_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { struct apple_sc *asc = hid_get_drvdata(hdev); + if(*rsize >=71 && rdesc[70] == 0x65 && rdesc[64] == 0x65) { + hid_info(hdev, + "fixing up Magic Keyboard JIS report descriptor\n"); + rdesc[64] = rdesc[70] = 0xe7; + } + if ((asc->quirks & APPLE_RDESC_JIS) && *rsize >= 60 && rdesc[53] == 0x65 && rdesc[59] == 0x65) { hid_info(hdev, -- cgit From 310e2d43c3ad429c1fba4b175806cf1f55ed73a6 Mon Sep 17 00:00:00 2001 From: Jeremy Sowden Date: Sun, 12 Sep 2021 22:24:33 +0100 Subject: netfilter: ip6_tables: zero-initialize fragment offset ip6tables only sets the `IP6T_F_PROTO` flag on a rule if a protocol is specified (`-p tcp`, for example). However, if the flag is not set, `ip6_packet_match` doesn't call `ipv6_find_hdr` for the skb, in which case the fragment offset is left uninitialized and a garbage value is passed to each matcher. Signed-off-by: Jeremy Sowden Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/ipv6/netfilter/ip6_tables.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index de2cf3943b91..a579ea14a69b 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -273,6 +273,7 @@ ip6t_do_table(struct sk_buff *skb, * things we don't know, ie. tcp syn flag or ports). If the * rule is also a fragment-specific rule, non-fragments won't * match it. */ + acpar.fragoff = 0; acpar.hotdrop = false; acpar.state = state; -- cgit From 0c8fbaa553077630e8eae45bd9676cfc01836aeb Mon Sep 17 00:00:00 2001 From: Joshua-Dickens Date: Tue, 14 Sep 2021 13:28:25 -0400 Subject: HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDs Add the new PIDs to wacom_wac.c to support the new models in the Intuos series. [jkosina@suse.cz: fix changelog] Signed-off-by: Joshua Dickens Reviewed-by: Ping Cheng Signed-off-by: Jiri Kosina --- drivers/hid/wacom_wac.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index fd51769d0994..33a6908995b1 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -4746,6 +4746,12 @@ static const struct wacom_features wacom_features_0x393 = { "Wacom Intuos Pro S", 31920, 19950, 8191, 63, INTUOSP2S_BT, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7, .touch_max = 10 }; +static const struct wacom_features wacom_features_0x3c6 = + { "Wacom Intuos BT S", 15200, 9500, 4095, 63, + INTUOSHT3_BT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4 }; +static const struct wacom_features wacom_features_0x3c8 = + { "Wacom Intuos BT M", 21600, 13500, 4095, 63, + INTUOSHT3_BT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4 }; static const struct wacom_features wacom_features_HID_ANY_ID = { "Wacom HID", .type = HID_GENERIC, .oVid = HID_ANY_ID, .oPid = HID_ANY_ID }; @@ -4919,6 +4925,8 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x37A) }, { USB_DEVICE_WACOM(0x37B) }, { BT_DEVICE_WACOM(0x393) }, + { BT_DEVICE_WACOM(0x3c6) }, + { BT_DEVICE_WACOM(0x3c8) }, { USB_DEVICE_WACOM(0x4001) }, { USB_DEVICE_WACOM(0x4004) }, { USB_DEVICE_WACOM(0x5000) }, -- cgit From 10d93a98190aec2c3ff98d9472ab1bf0543aa02c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 15 Sep 2021 15:21:08 +0300 Subject: ASoC: SOF: imx: imx8: Bar index is only valid for IRAM and SRAM types i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3) bars, everything else is left as 0 in sdev->bar[] array. If a broken or purposefully crafted firmware image is loaded with other types of FW_BLK_TYPE then a kernel crash can be triggered. Make sure that only IRAM/SRAM type is converted to bar index. Fixes: 202acc565a1f0 ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by: Peter Ujfalusi Reviewed-by: Daniel Baluta Reviewed-by: Ranjani Sridharan Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20210915122116.18317-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/imx/imx8.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/imx/imx8.c b/sound/soc/sof/imx/imx8.c index 12fedf0984bd..7e9723a10d02 100644 --- a/sound/soc/sof/imx/imx8.c +++ b/sound/soc/sof/imx/imx8.c @@ -365,7 +365,14 @@ static int imx8_remove(struct snd_sof_dev *sdev) /* on i.MX8 there is 1 to 1 match between type and BAR idx */ static int imx8_get_bar_index(struct snd_sof_dev *sdev, u32 type) { - return type; + /* Only IRAM and SRAM bars are valid */ + switch (type) { + case SOF_FW_BLK_TYPE_IRAM: + case SOF_FW_BLK_TYPE_SRAM: + return type; + default: + return -EINVAL; + } } static void imx8_ipc_msg_data(struct snd_sof_dev *sdev, -- cgit From d9be4a88c3627c270bbe032b623dc43f3b764565 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 15 Sep 2021 15:21:09 +0300 Subject: ASoC: SOF: imx: imx8m: Bar index is only valid for IRAM and SRAM types i.MX8 only uses SOF_FW_BLK_TYPE_IRAM (1) and SOF_FW_BLK_TYPE_SRAM (3) bars, everything else is left as 0 in sdev->bar[] array. If a broken or purposefully crafted firmware image is loaded with other types of FW_BLK_TYPE then a kernel crash can be triggered. Make sure that only IRAM/SRAM type is converted to bar index. Fixes: afb93d716533d ("ASoC: SOF: imx: Add i.MX8M HW support") Signed-off-by: Peter Ujfalusi Reviewed-by: Daniel Baluta Reviewed-by: Ranjani Sridharan Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20210915122116.18317-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/imx/imx8m.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/imx/imx8m.c b/sound/soc/sof/imx/imx8m.c index cb822d953767..892e1482f97f 100644 --- a/sound/soc/sof/imx/imx8m.c +++ b/sound/soc/sof/imx/imx8m.c @@ -228,7 +228,14 @@ static int imx8m_remove(struct snd_sof_dev *sdev) /* on i.MX8 there is 1 to 1 match between type and BAR idx */ static int imx8m_get_bar_index(struct snd_sof_dev *sdev, u32 type) { - return type; + /* Only IRAM and SRAM bars are valid */ + switch (type) { + case SOF_FW_BLK_TYPE_IRAM: + case SOF_FW_BLK_TYPE_SRAM: + return type; + default: + return -EINVAL; + } } static void imx8m_ipc_msg_data(struct snd_sof_dev *sdev, -- cgit From 8914a7a247e065438a0ec86a58c1c359223d2c9e Mon Sep 17 00:00:00 2001 From: Li Zhijian Date: Wed, 15 Sep 2021 21:45:54 +0800 Subject: selftests: be sure to make khdr before other targets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit LKP/0Day reported some building errors about kvm, and errors message are not always same: - lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared (first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’? - lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use in this function); did you mean ‘MAP_HUGE_16GB’? Although kvm relies on the khdr, they still be built in parallel when -j is specified. In this case, it will cause compiling errors. Here we mark target khdr as NOTPARALLEL to make it be always built first. CC: Philip Li Reported-by: kernel test robot Signed-off-by: Li Zhijian Signed-off-by: Shuah Khan --- tools/testing/selftests/lib.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index fa2ac0e56b43..fe7ee2b0f29c 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -48,6 +48,7 @@ ARCH ?= $(SUBARCH) # When local build is done, headers are installed in the default # INSTALL_HDR_PATH usr/include. .PHONY: khdr +.NOTPARALLEL: khdr: ifndef KSFT_KHDR_INSTALL_DONE ifeq (1,$(DEFAULT_INSTALL_HDR_PATH)) -- cgit From 37cb28ec7d3a36a5bace7063a3dba633ab110f8b Mon Sep 17 00:00:00 2001 From: Piotr Krysiuk Date: Wed, 15 Sep 2021 17:04:37 +0100 Subject: bpf, mips: Validate conditional branch offsets The conditional branch instructions on MIPS use 18-bit signed offsets allowing for a branch range of 128 KBytes (backward and forward). However, this limit is not observed by the cBPF JIT compiler, and so the JIT compiler emits out-of-range branches when translating certain cBPF programs. A specific example of such a cBPF program is included in the "BPF_MAXINSNS: exec all MSH" test from lib/test_bpf.c that executes anomalous machine code containing incorrect branch offsets under JIT. Furthermore, this issue can be abused to craft undesirable machine code, where the control flow is hijacked to execute arbitrary Kernel code. The following steps can be used to reproduce the issue: # echo 1 > /proc/sys/net/core/bpf_jit_enable # modprobe test_bpf test_name="BPF_MAXINSNS: exec all MSH" This should produce multiple warnings from build_bimm() similar to: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 209 at arch/mips/mm/uasm-mips.c:210 build_insn+0x558/0x590 Micro-assembler field overflow Modules linked in: test_bpf(+) CPU: 0 PID: 209 Comm: modprobe Not tainted 5.14.3 #1 Stack : 00000000 807bb824 82b33c9c 801843c0 00000000 00000004 00000000 63c9b5ee 82b33af4 80999898 80910000 80900000 82fd6030 00000001 82b33a98 82087180 00000000 00000000 80873b28 00000000 000000fc 82b3394c 00000000 2e34312e 6d6d6f43 809a180f 809a1836 6f6d203a 80900000 00000001 82b33bac 80900000 00027f80 00000000 00000000 807bb824 00000000 804ed790 001cc317 00000001 [...] Call Trace: [<80108f44>] show_stack+0x38/0x118 [<807a7aac>] dump_stack_lvl+0x5c/0x7c [<807a4b3c>] __warn+0xcc/0x140 [<807a4c3c>] warn_slowpath_fmt+0x8c/0xb8 [<8011e198>] build_insn+0x558/0x590 [<8011e358>] uasm_i_bne+0x20/0x2c [<80127b48>] build_body+0xa58/0x2a94 [<80129c98>] bpf_jit_compile+0x114/0x1e4 [<80613fc4>] bpf_prepare_filter+0x2ec/0x4e4 [<8061423c>] bpf_prog_create+0x80/0xc4 [] test_bpf_init+0x300/0xba8 [test_bpf] [<8010051c>] do_one_initcall+0x50/0x1d4 [<801c5e54>] do_init_module+0x60/0x220 [<801c8b20>] sys_finit_module+0xc4/0xfc [<801144d0>] syscall_common+0x34/0x58 [...] ---[ end trace a287d9742503c645 ]--- Then the anomalous machine code executes: => 0xc0a18000: addiu sp,sp,-16 0xc0a18004: sw s3,0(sp) 0xc0a18008: sw s4,4(sp) 0xc0a1800c: sw s5,8(sp) 0xc0a18010: sw ra,12(sp) 0xc0a18014: move s5,a0 0xc0a18018: move s4,zero 0xc0a1801c: move s3,zero # __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0) 0xc0a18020: lui t6,0x8012 0xc0a18024: ori t4,t6,0x9e14 0xc0a18028: li a1,0 0xc0a1802c: jalr t4 0xc0a18030: move a0,s5 0xc0a18034: bnez v0,0xc0a1ffb8 # incorrect branch offset 0xc0a18038: move v0,zero 0xc0a1803c: andi s4,s3,0xf 0xc0a18040: b 0xc0a18048 0xc0a18044: sll s4,s4,0x2 [...] # __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0) 0xc0a1ffa0: lui t6,0x8012 0xc0a1ffa4: ori t4,t6,0x9e14 0xc0a1ffa8: li a1,0 0xc0a1ffac: jalr t4 0xc0a1ffb0: move a0,s5 0xc0a1ffb4: bnez v0,0xc0a1ffb8 # incorrect branch offset 0xc0a1ffb8: move v0,zero 0xc0a1ffbc: andi s4,s3,0xf 0xc0a1ffc0: b 0xc0a1ffc8 0xc0a1ffc4: sll s4,s4,0x2 # __BPF_STMT(BPF_LDX | BPF_B | BPF_MSH, 0) 0xc0a1ffc8: lui t6,0x8012 0xc0a1ffcc: ori t4,t6,0x9e14 0xc0a1ffd0: li a1,0 0xc0a1ffd4: jalr t4 0xc0a1ffd8: move a0,s5 0xc0a1ffdc: bnez v0,0xc0a3ffb8 # correct branch offset 0xc0a1ffe0: move v0,zero 0xc0a1ffe4: andi s4,s3,0xf 0xc0a1ffe8: b 0xc0a1fff0 0xc0a1ffec: sll s4,s4,0x2 [...] # epilogue 0xc0a3ffb8: lw s3,0(sp) 0xc0a3ffbc: lw s4,4(sp) 0xc0a3ffc0: lw s5,8(sp) 0xc0a3ffc4: lw ra,12(sp) 0xc0a3ffc8: addiu sp,sp,16 0xc0a3ffcc: jr ra 0xc0a3ffd0: nop To mitigate this issue, we assert the branch ranges for each emit call that could generate an out-of-range branch. Fixes: 36366e367ee9 ("MIPS: BPF: Restore MIPS32 cBPF JIT") Fixes: c6610de353da ("MIPS: net: Add BPF JIT") Signed-off-by: Piotr Krysiuk Signed-off-by: Daniel Borkmann Tested-by: Johan Almbladh Acked-by: Johan Almbladh Cc: Paul Burton Cc: Thomas Bogendoerfer Link: https://lore.kernel.org/bpf/20210915160437.4080-1-piotras@gmail.com --- arch/mips/net/bpf_jit.c | 57 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 14 deletions(-) diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c index 0af88622c619..cb6d22439f71 100644 --- a/arch/mips/net/bpf_jit.c +++ b/arch/mips/net/bpf_jit.c @@ -662,6 +662,11 @@ static void build_epilogue(struct jit_ctx *ctx) ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative : func) : \ func##_positive) +static bool is_bad_offset(int b_off) +{ + return b_off > 0x1ffff || b_off < -0x20000; +} + static int build_body(struct jit_ctx *ctx) { const struct bpf_prog *prog = ctx->skf; @@ -728,7 +733,10 @@ load_common: /* Load return register on DS for failures */ emit_reg_move(r_ret, r_zero, ctx); /* Return with error */ - emit_b(b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_b(b_off, ctx); emit_nop(ctx); break; case BPF_LD | BPF_W | BPF_IND: @@ -775,8 +783,10 @@ load_ind: emit_jalr(MIPS_R_RA, r_s0, ctx); emit_reg_move(MIPS_R_A0, r_skb, ctx); /* delay slot */ /* Check the error value */ - emit_bcond(MIPS_COND_NE, r_ret, 0, - b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_bcond(MIPS_COND_NE, r_ret, 0, b_off, ctx); emit_reg_move(r_ret, r_zero, ctx); /* We are good */ /* X <- P[1:K] & 0xf */ @@ -855,8 +865,10 @@ load_ind: /* A /= X */ ctx->flags |= SEEN_X | SEEN_A; /* Check if r_X is zero */ - emit_bcond(MIPS_COND_EQ, r_X, r_zero, - b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_bcond(MIPS_COND_EQ, r_X, r_zero, b_off, ctx); emit_load_imm(r_ret, 0, ctx); /* delay slot */ emit_div(r_A, r_X, ctx); break; @@ -864,8 +876,10 @@ load_ind: /* A %= X */ ctx->flags |= SEEN_X | SEEN_A; /* Check if r_X is zero */ - emit_bcond(MIPS_COND_EQ, r_X, r_zero, - b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_bcond(MIPS_COND_EQ, r_X, r_zero, b_off, ctx); emit_load_imm(r_ret, 0, ctx); /* delay slot */ emit_mod(r_A, r_X, ctx); break; @@ -926,7 +940,10 @@ load_ind: break; case BPF_JMP | BPF_JA: /* pc += K */ - emit_b(b_imm(i + k + 1, ctx), ctx); + b_off = b_imm(i + k + 1, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_b(b_off, ctx); emit_nop(ctx); break; case BPF_JMP | BPF_JEQ | BPF_K: @@ -1056,12 +1073,16 @@ jmp_cmp: break; case BPF_RET | BPF_A: ctx->flags |= SEEN_A; - if (i != prog->len - 1) + if (i != prog->len - 1) { /* * If this is not the last instruction * then jump to the epilogue */ - emit_b(b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_b(b_off, ctx); + } emit_reg_move(r_ret, r_A, ctx); /* delay slot */ break; case BPF_RET | BPF_K: @@ -1075,7 +1096,10 @@ jmp_cmp: * If this is not the last instruction * then jump to the epilogue */ - emit_b(b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_b(b_off, ctx); emit_nop(ctx); } break; @@ -1133,8 +1157,10 @@ jmp_cmp: /* Load *dev pointer */ emit_load_ptr(r_s0, r_skb, off, ctx); /* error (0) in the delay slot */ - emit_bcond(MIPS_COND_EQ, r_s0, r_zero, - b_imm(prog->len, ctx), ctx); + b_off = b_imm(prog->len, ctx); + if (is_bad_offset(b_off)) + return -E2BIG; + emit_bcond(MIPS_COND_EQ, r_s0, r_zero, b_off, ctx); emit_reg_move(r_ret, r_zero, ctx); if (code == (BPF_ANC | SKF_AD_IFINDEX)) { BUILD_BUG_ON(sizeof_field(struct net_device, ifindex) != 4); @@ -1244,7 +1270,10 @@ void bpf_jit_compile(struct bpf_prog *fp) /* Generate the actual JIT code */ build_prologue(&ctx); - build_body(&ctx); + if (build_body(&ctx)) { + module_memfree(ctx.target); + goto out; + } build_epilogue(&ctx); /* Update the icache */ -- cgit From 34331739e19fd6a293d488add28832ad49c9fc54 Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Tue, 10 Aug 2021 09:40:36 -0700 Subject: fpga: machxo2-spi: Return an error on failure Earlier successes leave 'ret' in a non error state, so these errors are not reported. Set ret to -EINVAL before going to the error handler. This addresses two issues reported by smatch: drivers/fpga/machxo2-spi.c:229 machxo2_write_init() warn: missing error code 'ret' drivers/fpga/machxo2-spi.c:316 machxo2_write_complete() warn: missing error code 'ret' [mdf@kernel.org: Reworded commit message] Fixes: 88fb3a002330 ("fpga: lattice machxo2: Add Lattice MachXO2 support") Reported-by: Dan Carpenter Signed-off-by: Tom Rix Signed-off-by: Moritz Fischer --- drivers/fpga/machxo2-spi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c index 1afb41aa20d7..b4a530a31302 100644 --- a/drivers/fpga/machxo2-spi.c +++ b/drivers/fpga/machxo2-spi.c @@ -225,8 +225,10 @@ static int machxo2_write_init(struct fpga_manager *mgr, goto fail; get_status(spi, &status); - if (test_bit(FAIL, &status)) + if (test_bit(FAIL, &status)) { + ret = -EINVAL; goto fail; + } dump_status_reg(&status); spi_message_init(&msg); @@ -313,6 +315,7 @@ static int machxo2_write_complete(struct fpga_manager *mgr, dump_status_reg(&status); if (!test_bit(DONE, &status)) { machxo2_cleanup(mgr); + ret = -EINVAL; goto fail; } -- cgit From a1e4470823d99e75b596748086e120dea169ed3c Mon Sep 17 00:00:00 2001 From: Jiapeng Chong Date: Fri, 13 Aug 2021 14:40:42 +0800 Subject: fpga: machxo2-spi: Fix missing error code in machxo2_write_complete() The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'ret'. Eliminate the follow smatch warning: drivers/fpga/machxo2-spi.c:341 machxo2_write_complete() warn: missing error code 'ret'. [mdf@kernel.org: Reworded commit message] Fixes: 88fb3a002330 ("fpga: lattice machxo2: Add Lattice MachXO2 support") Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Signed-off-by: Moritz Fischer --- drivers/fpga/machxo2-spi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c index b4a530a31302..ea2ec3c6815c 100644 --- a/drivers/fpga/machxo2-spi.c +++ b/drivers/fpga/machxo2-spi.c @@ -338,6 +338,7 @@ static int machxo2_write_complete(struct fpga_manager *mgr, break; if (++refreshloop == MACHXO2_MAX_REFRESH_LOOP) { machxo2_cleanup(mgr); + ret = -EINVAL; goto fail; } } while (1); -- cgit From 17ac76e050c51497e75871a43aa3328ba54cdafd Mon Sep 17 00:00:00 2001 From: Cai Huoqing Date: Tue, 31 Aug 2021 15:49:58 +0800 Subject: drm/exynos: Make use of the helper function devm_platform_ioremap_resource() Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 5 +---- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 5 +---- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 6 +----- drivers/gpu/drm/exynos/exynos_drm_rotator.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_scaler.c | 4 +--- drivers/gpu/drm/exynos/exynos_hdmi.c | 4 +--- 9 files changed, 9 insertions(+), 31 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 9870c4e6af36..b5001db7a95c 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -793,7 +793,6 @@ static int exynos5433_decon_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct decon_context *ctx; - struct resource *res; int ret; int i; @@ -818,8 +817,7 @@ static int exynos5433_decon_probe(struct platform_device *pdev) ctx->clks[i] = clk; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->addr = devm_ioremap_resource(dev, res); + ctx->addr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->addr)) return PTR_ERR(ctx->addr); diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index e39fac889edc..8d137857818c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -1738,7 +1738,6 @@ static const struct component_ops exynos_dsi_component_ops = { static int exynos_dsi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *res; struct exynos_dsi *dsi; int ret, i; @@ -1789,8 +1788,7 @@ static int exynos_dsi_probe(struct platform_device *pdev) } } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - dsi->reg_base = devm_ioremap_resource(dev, res); + dsi->reg_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(dsi->reg_base)) return PTR_ERR(dsi->reg_base); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index a3c718148c45..ecfd82d0afb7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -85,7 +85,6 @@ struct fimc_scaler { /* * A structure of fimc context. * - * @regs_res: register resources. * @regs: memory mapped io registers. * @lock: locking of operations. * @clocks: fimc clocks. @@ -103,7 +102,6 @@ struct fimc_context { struct exynos_drm_ipp_formats *formats; unsigned int num_formats; - struct resource *regs_res; void __iomem *regs; spinlock_t lock; struct clk *clocks[FIMC_CLKS_MAX]; @@ -1327,8 +1325,7 @@ static int fimc_probe(struct platform_device *pdev) ctx->num_formats = num_formats; /* resource memory */ - ctx->regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->regs = devm_ioremap_resource(dev, ctx->regs_res); + ctx->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 700ca4fa6665..c735e53939d8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -1202,9 +1202,7 @@ static int fimd_probe(struct platform_device *pdev) return PTR_ERR(ctx->lcd_clk); } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - ctx->regs = devm_ioremap_resource(dev, res); + ctx->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index b00230626c6a..471fd6c8135f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -1449,7 +1449,6 @@ static const struct component_ops g2d_component_ops = { static int g2d_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *res; struct g2d_data *g2d; int ret; @@ -1491,9 +1490,7 @@ static int g2d_probe(struct platform_device *pdev) clear_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags); clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - g2d->regs = devm_ioremap_resource(dev, res); + g2d->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(g2d->regs)) { ret = PTR_ERR(g2d->regs); goto err_put_clk; diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 90d7bf906885..166a80262896 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -86,7 +86,6 @@ struct gsc_scaler { /* * A structure of gsc context. * - * @regs_res: register resources. * @regs: memory mapped io registers. * @gsc_clk: gsc gate clock. * @sc: scaler infomations. @@ -103,7 +102,6 @@ struct gsc_context { struct exynos_drm_ipp_formats *formats; unsigned int num_formats; - struct resource *regs_res; void __iomem *regs; const char **clk_names; struct clk *clocks[GSC_MAX_CLOCKS]; @@ -1272,9 +1270,7 @@ static int gsc_probe(struct platform_device *pdev) } } - /* resource memory */ - ctx->regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->regs = devm_ioremap_resource(dev, ctx->regs_res); + ctx->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index ee61be4cf152..dec7df35baa9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -278,7 +278,6 @@ static const struct component_ops rotator_component_ops = { static int rotator_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *regs_res; struct rot_context *rot; const struct rot_variant *variant; int irq; @@ -292,8 +291,7 @@ static int rotator_probe(struct platform_device *pdev) rot->formats = variant->formats; rot->num_formats = variant->num_formats; rot->dev = dev; - regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - rot->regs = devm_ioremap_resource(dev, regs_res); + rot->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(rot->regs)) return PTR_ERR(rot->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_scaler.c b/drivers/gpu/drm/exynos/exynos_drm_scaler.c index f9ae5b038d59..3a7851b7dc66 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_scaler.c +++ b/drivers/gpu/drm/exynos/exynos_drm_scaler.c @@ -485,7 +485,6 @@ static const struct component_ops scaler_component_ops = { static int scaler_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *regs_res; struct scaler_context *scaler; int irq; int ret, i; @@ -498,8 +497,7 @@ static int scaler_probe(struct platform_device *pdev) (struct scaler_data *)of_device_get_match_data(dev); scaler->dev = dev; - regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - scaler->regs = devm_ioremap_resource(dev, regs_res); + scaler->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(scaler->regs)) return PTR_ERR(scaler->regs); diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index c769dec576de..7655142a4651 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1957,7 +1957,6 @@ static int hdmi_probe(struct platform_device *pdev) struct hdmi_audio_infoframe *audio_infoframe; struct device *dev = &pdev->dev; struct hdmi_context *hdata; - struct resource *res; int ret; hdata = devm_kzalloc(dev, sizeof(struct hdmi_context), GFP_KERNEL); @@ -1979,8 +1978,7 @@ static int hdmi_probe(struct platform_device *pdev) return ret; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hdata->regs = devm_ioremap_resource(dev, res); + hdata->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(hdata->regs)) { ret = PTR_ERR(hdata->regs); return ret; -- cgit From d46ef750ed58cbeeba2d9a55c99231c30a172764 Mon Sep 17 00:00:00 2001 From: Evgeny Novikov Date: Tue, 1 Jun 2021 19:38:01 +0300 Subject: HID: amd_sfh: Fix potential NULL pointer dereference devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at registration that will cause NULL pointer dereference since corresponding data is not initialized yet. The patch moves initialization of data before devm_add_action_or_reset(). Found by Linux Driver Verification project (linuxtesting.org). [jkosina@suse.cz: rebase] Signed-off-by: Evgeny Novikov Acked-by: Basavaraj Natikar Signed-off-by: Jiri Kosina --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index 79b138fd4261..9a1824757aae 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -251,6 +251,10 @@ static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i return rc; } + rc = amd_sfh_hid_client_init(privdata); + if (rc) + return rc; + privdata->cl_data = devm_kzalloc(&pdev->dev, sizeof(struct amdtp_cl_data), GFP_KERNEL); if (!privdata->cl_data) return -ENOMEM; @@ -261,7 +265,7 @@ static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i mp2_select_ops(privdata); - return amd_sfh_hid_client_init(privdata); + return 0; } static int __maybe_unused amd_mp2_pci_resume(struct device *dev) -- cgit From 5297cfa6bdf93e3889f78f9b482e2a595a376083 Mon Sep 17 00:00:00 2001 From: Sai Krishna Potthuri Date: Wed, 18 Aug 2021 12:53:14 +0530 Subject: EDAC/synopsys: Fix wrong value type assignment for edac_mode dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Issue caught by Coverity check "enumerated type mixed with another type." [ bp: Rewrite commit message, add tags. ] Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller") Signed-off-by: Sai Krishna Potthuri Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com --- drivers/edac/synopsys_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c index 7e7146b22c16..7d08627e738b 100644 --- a/drivers/edac/synopsys_edac.c +++ b/drivers/edac/synopsys_edac.c @@ -782,7 +782,7 @@ static void init_csrows(struct mem_ctl_info *mci) for (j = 0; j < csi->nr_channels; j++) { dimm = csi->channels[j]->dimm; - dimm->edac_mode = EDAC_FLAG_SECDED; + dimm->edac_mode = EDAC_SECDED; dimm->mtype = p_data->get_mtype(priv->baseaddr); dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels; dimm->grain = SYNPS_EDAC_ERR_GRAIN; -- cgit From 1511df6f5e9ef32826f20db2ee81f8527154dc14 Mon Sep 17 00:00:00 2001 From: Ilya Leoshkevich Date: Tue, 7 Sep 2021 11:58:59 +0200 Subject: s390/bpf: Fix branch shortening during codegen pass EMIT6_PCREL() macro assumes that the previous pass generated 6 bytes of code, which is not the case if branch shortening took place. Fix by using jit->prg, like all the other EMIT6_PCREL_*() macros. Reported-by: Johan Almbladh Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Signed-off-by: Ilya Leoshkevich Signed-off-by: Vasily Gorbik --- arch/s390/net/bpf_jit_comp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 88419263a89a..c3bd630e9b43 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -248,8 +248,7 @@ static inline void reg_set_seen(struct bpf_jit *jit, u32 b1) #define EMIT6_PCREL(op1, op2, b1, b2, i, off, mask) \ ({ \ - /* Branch instruction needs 6 bytes */ \ - int rel = (addrs[(i) + (off) + 1] - (addrs[(i) + 1] - 6)) / 2;\ + int rel = (addrs[(i) + (off) + 1] - jit->prg) / 2; \ _EMIT6((op1) | reg(b1, b2) << 16 | (rel & 0xffff), (op2) | (mask));\ REG_SET_SEEN(b1); \ REG_SET_SEEN(b2); \ -- cgit From 6e61dc9da0b7a0d91d57c2e20b5ea4fd2d4e7e53 Mon Sep 17 00:00:00 2001 From: Ilya Leoshkevich Date: Tue, 7 Sep 2021 13:41:16 +0200 Subject: s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant The JIT uses agfi for subtracting constants, but -(-0x80000000) cannot be represented as a 32-bit signed binary integer. Fix by using algfi in this particular case. Reported-by: Johan Almbladh Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Reviewed-by: Heiko Carstens Signed-off-by: Ilya Leoshkevich Signed-off-by: Vasily Gorbik --- arch/s390/net/bpf_jit_comp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index c3bd630e9b43..245f98d5f690 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -794,8 +794,13 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, case BPF_ALU64 | BPF_SUB | BPF_K: /* dst = dst - imm */ if (!imm) break; - /* agfi %dst,-imm */ - EMIT6_IMM(0xc2080000, dst_reg, -imm); + if (imm == -0x80000000) { + /* algfi %dst,0x80000000 */ + EMIT6_IMM(0xc20a0000, dst_reg, 0x80000000); + } else { + /* agfi %dst,-imm */ + EMIT6_IMM(0xc2080000, dst_reg, -imm); + } break; /* * BPF_MUL -- cgit From db7bee653859ef7179be933e7d1384644f795f26 Mon Sep 17 00:00:00 2001 From: Ilya Leoshkevich Date: Mon, 6 Sep 2021 15:04:14 +0200 Subject: s390/bpf: Fix optimizing out zero-extensions Currently the JIT completely removes things like `reg32 += 0`, however, the BPF_ALU semantics requires the target register to be zero-extended in such cases. Fix by optimizing out only the arithmetic operation, but not the subsequent zero-extension. Reported-by: Johan Almbladh Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Reviewed-by: Heiko Carstens Signed-off-by: Ilya Leoshkevich Signed-off-by: Vasily Gorbik --- arch/s390/net/bpf_jit_comp.c | 58 +++++++++++++++++++++++--------------------- 1 file changed, 30 insertions(+), 28 deletions(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 245f98d5f690..840d8594437d 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -760,10 +760,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT4(0xb9080000, dst_reg, src_reg); break; case BPF_ALU | BPF_ADD | BPF_K: /* dst = (u32) dst + (u32) imm */ - if (!imm) - break; - /* alfi %dst,imm */ - EMIT6_IMM(0xc20b0000, dst_reg, imm); + if (imm != 0) { + /* alfi %dst,imm */ + EMIT6_IMM(0xc20b0000, dst_reg, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_ADD | BPF_K: /* dst = dst + imm */ @@ -785,10 +785,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT4(0xb9090000, dst_reg, src_reg); break; case BPF_ALU | BPF_SUB | BPF_K: /* dst = (u32) dst - (u32) imm */ - if (!imm) - break; - /* alfi %dst,-imm */ - EMIT6_IMM(0xc20b0000, dst_reg, -imm); + if (imm != 0) { + /* alfi %dst,-imm */ + EMIT6_IMM(0xc20b0000, dst_reg, -imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_SUB | BPF_K: /* dst = dst - imm */ @@ -815,10 +815,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT4(0xb90c0000, dst_reg, src_reg); break; case BPF_ALU | BPF_MUL | BPF_K: /* dst = (u32) dst * (u32) imm */ - if (imm == 1) - break; - /* msfi %r5,imm */ - EMIT6_IMM(0xc2010000, dst_reg, imm); + if (imm != 1) { + /* msfi %r5,imm */ + EMIT6_IMM(0xc2010000, dst_reg, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_MUL | BPF_K: /* dst = dst * imm */ @@ -871,6 +871,8 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, if (BPF_OP(insn->code) == BPF_MOD) /* lhgi %dst,0 */ EMIT4_IMM(0xa7090000, dst_reg, 0); + else + EMIT_ZERO(dst_reg); break; } /* lhi %w0,0 */ @@ -1003,10 +1005,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT4(0xb9820000, dst_reg, src_reg); break; case BPF_ALU | BPF_XOR | BPF_K: /* dst = (u32) dst ^ (u32) imm */ - if (!imm) - break; - /* xilf %dst,imm */ - EMIT6_IMM(0xc0070000, dst_reg, imm); + if (imm != 0) { + /* xilf %dst,imm */ + EMIT6_IMM(0xc0070000, dst_reg, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_XOR | BPF_K: /* dst = dst ^ imm */ @@ -1037,10 +1039,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT6_DISP_LH(0xeb000000, 0x000d, dst_reg, dst_reg, src_reg, 0); break; case BPF_ALU | BPF_LSH | BPF_K: /* dst = (u32) dst << (u32) imm */ - if (imm == 0) - break; - /* sll %dst,imm(%r0) */ - EMIT4_DISP(0x89000000, dst_reg, REG_0, imm); + if (imm != 0) { + /* sll %dst,imm(%r0) */ + EMIT4_DISP(0x89000000, dst_reg, REG_0, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_LSH | BPF_K: /* dst = dst << imm */ @@ -1062,10 +1064,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT6_DISP_LH(0xeb000000, 0x000c, dst_reg, dst_reg, src_reg, 0); break; case BPF_ALU | BPF_RSH | BPF_K: /* dst = (u32) dst >> (u32) imm */ - if (imm == 0) - break; - /* srl %dst,imm(%r0) */ - EMIT4_DISP(0x88000000, dst_reg, REG_0, imm); + if (imm != 0) { + /* srl %dst,imm(%r0) */ + EMIT4_DISP(0x88000000, dst_reg, REG_0, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_RSH | BPF_K: /* dst = dst >> imm */ @@ -1087,10 +1089,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, EMIT6_DISP_LH(0xeb000000, 0x000a, dst_reg, dst_reg, src_reg, 0); break; case BPF_ALU | BPF_ARSH | BPF_K: /* ((s32) dst >> imm */ - if (imm == 0) - break; - /* sra %dst,imm(%r0) */ - EMIT4_DISP(0x8a000000, dst_reg, REG_0, imm); + if (imm != 0) { + /* sra %dst,imm(%r0) */ + EMIT4_DISP(0x8a000000, dst_reg, REG_0, imm); + } EMIT_ZERO(dst_reg); break; case BPF_ALU64 | BPF_ARSH | BPF_K: /* ((s64) dst) >>= imm */ -- cgit From 54607282fae6148641a08d81a6e0953b541249c7 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 16 Sep 2021 10:44:06 +0200 Subject: EDAC/dmc520: Assign the proper type to dimm->edac_mode dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Fixes: 1088750d7839 ("EDAC: Add EDAC driver for DMC520") Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210916085258.7544-1-bp@alien8.de --- drivers/edac/dmc520_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/dmc520_edac.c b/drivers/edac/dmc520_edac.c index fc1153ab1ebb..b8a7d9594afd 100644 --- a/drivers/edac/dmc520_edac.c +++ b/drivers/edac/dmc520_edac.c @@ -464,7 +464,7 @@ static void dmc520_init_csrow(struct mem_ctl_info *mci) dimm->grain = pvt->mem_width_in_bytes; dimm->dtype = dt; dimm->mtype = mt; - dimm->edac_mode = EDAC_FLAG_SECDED; + dimm->edac_mode = EDAC_SECDED; dimm->nr_pages = pages_per_rank / csi->nr_channels; } } -- cgit From be830389bd49d3f1f8737bd45513361628641c08 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 14 Sep 2021 14:08:47 +0300 Subject: ALSA: pcxhr: "fix" PCXHR_REG_TO_PORT definition The following preprocessor directive is non-compliant: #undef PCXHR_REG_TO_PORT(x) gcc warns about extra tokens but nobody sees them as they are under if branch which is never parsed. Make it an #error, it is not clear to me what the author meant. Signed-off-by: Alexey Dobriyan Link: https://lore.kernel.org/r/YUCCv47sm4zf9OVO@localhost.localdomain Signed-off-by: Takashi Iwai --- sound/pci/pcxhr/pcxhr_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/pcxhr/pcxhr_core.c b/sound/pci/pcxhr/pcxhr_core.c index 87d24224c042..23f253effb4f 100644 --- a/sound/pci/pcxhr/pcxhr_core.c +++ b/sound/pci/pcxhr/pcxhr_core.c @@ -52,7 +52,7 @@ #define PCXHR_DSP 2 #if (PCXHR_DSP_OFFSET_MAX > PCXHR_PLX_OFFSET_MIN) -#undef PCXHR_REG_TO_PORT(x) +#error PCXHR_REG_TO_PORT(x) #else #define PCXHR_REG_TO_PORT(x) ((x)>PCXHR_DSP_OFFSET_MAX ? PCXHR_PLX : PCXHR_DSP) #endif -- cgit From 94d508fa3186d0cbc63765aa94d5cf3bd847694c Mon Sep 17 00:00:00 2001 From: Stefan Binding Date: Thu, 16 Sep 2021 10:56:46 +0100 Subject: ALSA: hda/cs8409: Setup Dolphin Headset Mic as Phantom Jack Dell's requirement to have headset mic as phantom jack on this specific dolphin hardware platform. Signed-off-by: Stefan Binding Signed-off-by: Vitaly Rodionov Link: https://lore.kernel.org/r/20210916095646.7631-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_cs8409.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_cs8409.c b/sound/pci/hda/patch_cs8409.c index 3c7ef55d016e..31ff11ab868e 100644 --- a/sound/pci/hda/patch_cs8409.c +++ b/sound/pci/hda/patch_cs8409.c @@ -1207,6 +1207,9 @@ void dolphin_fixups(struct hda_codec *codec, const struct hda_fixup *fix, int ac snd_hda_jack_add_kctl(codec, DOLPHIN_LO_PIN_NID, "Line Out", true, SND_JACK_HEADPHONE, NULL); + snd_hda_jack_add_kctl(codec, DOLPHIN_AMIC_PIN_NID, "Microphone", true, + SND_JACK_MICROPHONE, NULL); + cs8409_fix_caps(codec, DOLPHIN_HP_PIN_NID); cs8409_fix_caps(codec, DOLPHIN_LO_PIN_NID); cs8409_fix_caps(codec, DOLPHIN_AMIC_PIN_NID); -- cgit From 5aeb05b27f81269a2bf2e15eab9fc0f9a400d3a8 Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Wed, 15 Sep 2021 11:09:39 +0300 Subject: software node: balance refcount for managed software nodes software_node_notify(), on KOBJ_REMOVE drops the refcount twice on managed software nodes, thus leading to underflow errors. Balance the refcount by bumping it in the device_create_managed_software_node() function. The error [1] was encountered after adding a .shutdown() op to our fsl-mc-bus driver. [1] pc : refcount_warn_saturate+0xf8/0x150 lr : refcount_warn_saturate+0xf8/0x150 sp : ffff80001009b920 x29: ffff80001009b920 x28: ffff1a2420318000 x27: 0000000000000000 x26: ffffccac15e7a038 x25: 0000000000000008 x24: ffffccac168e0030 x23: ffff1a2428a82000 x22: 0000000000080000 x21: ffff1a24287b5000 x20: 0000000000000001 x19: ffff1a24261f4400 x18: ffffffffffffffff x17: 6f72645f726f7272 x16: 0000000000000000 x15: ffff80009009b607 x14: 0000000000000000 x13: ffffccac16602670 x12: 0000000000000a17 x11: 000000000000035d x10: ffffccac16602670 x9 : ffffccac16602670 x8 : 00000000ffffefff x7 : ffffccac1665a670 x6 : ffffccac1665a670 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1a2420318000 Call trace: refcount_warn_saturate+0xf8/0x150 kobject_put+0x10c/0x120 software_node_notify+0xd8/0x140 device_platform_notify+0x4c/0xb4 device_del+0x188/0x424 fsl_mc_device_remove+0x2c/0x4c rebofind sp.c__fsl_mc_device_remove+0x14/0x2c device_for_each_child+0x5c/0xac dprc_remove+0x9c/0xc0 fsl_mc_driver_remove+0x28/0x64 __device_release_driver+0x188/0x22c device_release_driver+0x30/0x50 bus_remove_device+0x128/0x134 device_del+0x16c/0x424 fsl_mc_bus_remove+0x8c/0x114 fsl_mc_bus_shutdown+0x14/0x20 platform_shutdown+0x28/0x40 device_shutdown+0x15c/0x330 __do_sys_reboot+0x218/0x2a0 __arm64_sys_reboot+0x28/0x34 invoke_syscall+0x48/0x114 el0_svc_common+0x40/0xdc do_el0_svc+0x2c/0x94 el0_svc+0x2c/0x54 el0t_64_sync_handler+0xa8/0x12c el0t_64_sync+0x198/0x19c ---[ end trace 32eb1c71c7d86821 ]--- Fixes: 151f6ff78cdf ("software node: Provide replacement for device_add_properties()") Reported-by: Jon Nettleton Suggested-by: Heikki Krogerus Reviewed-by: Heikki Krogerus Signed-off-by: Laurentiu Tudor Cc: 5.12+ # 5.12+ [ rjw: Fix up the software_node_notify() invocation ] Signed-off-by: Rafael J. Wysocki --- drivers/base/swnode.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c index 7bd0f3cfb7eb..c46f6a8e14d2 100644 --- a/drivers/base/swnode.c +++ b/drivers/base/swnode.c @@ -1116,6 +1116,9 @@ int device_create_managed_software_node(struct device *dev, to_swnode(fwnode)->managed = true; set_secondary_fwnode(dev, fwnode); + if (device_is_registered(dev)) + software_node_notify(dev); + return 0; } EXPORT_SYMBOL_GPL(device_create_managed_software_node); -- cgit From 8a8e1813ffc35111fc0b6db49968ceb0e1615ced Mon Sep 17 00:00:00 2001 From: Marc Herbert Date: Thu, 16 Sep 2021 11:50:08 +0300 Subject: ASoC: SOF: loader: release_firmware() on load failure to avoid batching Invoke release_firmware() when the firmware fails to boot in sof_probe_continue(). The request_firmware() framework must be informed of failures in sof_probe_continue() otherwise its internal "batching" feature (different from caching) cached the firmware image forever. Attempts to correct the file in /lib/firmware/ were then silently and confusingly ignored until the next reboot. Unloading the drivers did not help because from their disconnected perspective the firmware had failed so there was nothing to release. Also leverage the new snd_sof_fw_unload() function to simplify the snd_sof_device_remove() function. Signed-off-by: Marc Herbert Reviewed-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Ranjani Sridharan Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20210916085008.28929-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/core.c | 4 +--- sound/soc/sof/loader.c | 2 ++ 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c index 3e4dd4a86363..59d0d7b2b55c 100644 --- a/sound/soc/sof/core.c +++ b/sound/soc/sof/core.c @@ -371,7 +371,6 @@ int snd_sof_device_remove(struct device *dev) dev_warn(dev, "error: %d failed to prepare DSP for device removal", ret); - snd_sof_fw_unload(sdev); snd_sof_ipc_free(sdev); snd_sof_free_debug(sdev); snd_sof_free_trace(sdev); @@ -394,8 +393,7 @@ int snd_sof_device_remove(struct device *dev) snd_sof_remove(sdev); /* release firmware */ - release_firmware(pdata->fw); - pdata->fw = NULL; + snd_sof_fw_unload(sdev); return 0; } diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c index 2b38a77cd594..9c3f251a0dd0 100644 --- a/sound/soc/sof/loader.c +++ b/sound/soc/sof/loader.c @@ -880,5 +880,7 @@ EXPORT_SYMBOL(snd_sof_run_firmware); void snd_sof_fw_unload(struct snd_sof_dev *sdev) { /* TODO: support module unloading at runtime */ + release_firmware(sdev->pdata->fw); + sdev->pdata->fw = NULL; } EXPORT_SYMBOL(snd_sof_fw_unload); -- cgit From 25766ee44ff8db4cdf8471b587dffb28b7b9d17f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 16 Sep 2021 11:53:42 +0300 Subject: ASoC: SOF: loader: Re-phrase the missing firmware error to avoid duplication In case the firmware is missing we will have the following in the kernel log: 1 | Direct firmware load for intel/sof/sof-tgl-h.ri failed with error -2 2 | error: request firmware intel/sof/sof-tgl-h.ri failed err: -2 3 | you may need to download the firmware from https://github.com/thesofproject/sof-bin/ 4 | error: failed to load DSP firmware -2 5 | error: sof_probe_work failed err: -2 The first line is the standard, request_firmware() warning. The second and third line is printed in snd_sof_load_firmware_raw() Note that the first and second line is mostly identical. With this patch the log will be changed to: 1 | Direct firmware load for intel/sof/sof-tgl-h.ri failed with error -2 2 | error: sof firmware file is missing, you might need to 3 | download it from https://github.com/thesofproject/sof-bin/ 4 | error: failed to load DSP firmware -2 5 | error: sof_probe_work failed err: -2 Signed-off-by: Peter Ujfalusi Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20210916085342.29993-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/loader.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c index 9c3f251a0dd0..bb79c77775b3 100644 --- a/sound/soc/sof/loader.c +++ b/sound/soc/sof/loader.c @@ -729,10 +729,10 @@ int snd_sof_load_firmware_raw(struct snd_sof_dev *sdev) ret = request_firmware(&plat_data->fw, fw_filename, sdev->dev); if (ret < 0) { - dev_err(sdev->dev, "error: request firmware %s failed err: %d\n", - fw_filename, ret); dev_err(sdev->dev, - "you may need to download the firmware from https://github.com/thesofproject/sof-bin/\n"); + "error: sof firmware file is missing, you might need to\n"); + dev_err(sdev->dev, + " download it from https://github.com/thesofproject/sof-bin/\n"); goto err; } else { dev_dbg(sdev->dev, "request_firmware %s successful\n", -- cgit From 71eabafac1eb67d590d4500eaf38177537ea6d4a Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 17 Aug 2021 05:01:51 +0300 Subject: drm/tegra: dc: Remove unused variables Remove unused variables from tegra_crtc_update_memory_bandwidth(). Fixes: 04d5d5df9df7 ("drm/tegra: dc: Support memory bandwidth management") Reported-by: kernel test robot Signed-off-by: Dmitry Osipenko Reviewed-by: Mikko Perttunen Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 3 --- drivers/gpu/drm/tegra/dc.h | 6 ------ 2 files changed, 9 deletions(-) diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index 16c7aabb94d3..a29d64f87563 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -1845,7 +1845,6 @@ tegra_crtc_update_memory_bandwidth(struct drm_crtc *crtc, bool prepare_bandwidth_transition) { const struct tegra_plane_state *old_tegra_state, *new_tegra_state; - const struct tegra_dc_state *old_dc_state, *new_dc_state; u32 i, new_avg_bw, old_avg_bw, new_peak_bw, old_peak_bw; const struct drm_plane_state *old_plane_state; const struct drm_crtc_state *old_crtc_state; @@ -1858,8 +1857,6 @@ tegra_crtc_update_memory_bandwidth(struct drm_crtc *crtc, return; old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc); - old_dc_state = to_const_dc_state(old_crtc_state); - new_dc_state = to_const_dc_state(crtc->state); if (!crtc->state->active) { if (!old_crtc_state->active) diff --git a/drivers/gpu/drm/tegra/dc.h b/drivers/gpu/drm/tegra/dc.h index f0cb691852a1..40378308d527 100644 --- a/drivers/gpu/drm/tegra/dc.h +++ b/drivers/gpu/drm/tegra/dc.h @@ -35,12 +35,6 @@ static inline struct tegra_dc_state *to_dc_state(struct drm_crtc_state *state) return NULL; } -static inline const struct tegra_dc_state * -to_const_dc_state(const struct drm_crtc_state *state) -{ - return to_dc_state((struct drm_crtc_state *)state); -} - struct tegra_dc_stats { unsigned long frames; unsigned long vblank; -- cgit From 8a44924e1400d75db5c6fdaf199038580df4f79f Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 17 Aug 2021 05:01:52 +0300 Subject: drm/tegra: uapi: Fix wrong mapping end address in case of disabled IOMMU All jobs are failing on Tegra20 because it doesn't use IOMMU and mapping function uses size of mapping that is zero instead of BO size, fix it. Fixes: d7c591bc1a3f ("drm/tegra: Implement new UAPI") Signed-off-by: Dmitry Osipenko Reviewed-by: Mikko Perttunen Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/uapi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tegra/uapi.c b/drivers/gpu/drm/tegra/uapi.c index dc16a24f4dbe..690a339c52ec 100644 --- a/drivers/gpu/drm/tegra/uapi.c +++ b/drivers/gpu/drm/tegra/uapi.c @@ -222,7 +222,7 @@ int tegra_drm_ioctl_channel_map(struct drm_device *drm, void *data, struct drm_f mapping->iova = sg_dma_address(mapping->sgt->sgl); } - mapping->iova_end = mapping->iova + host1x_to_tegra_bo(mapping->bo)->size; + mapping->iova_end = mapping->iova + host1x_to_tegra_bo(mapping->bo)->gem.size; err = xa_alloc(&context->mappings, &args->mapping, mapping, XA_LIMIT(1, U32_MAX), GFP_KERNEL); -- cgit From a81cf839a064af27349b857fe347e97dd98c12a0 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 17 Aug 2021 05:01:53 +0300 Subject: gpu/host1x: fence: Make spinlock static The DEFINE_SPINLOCK macro creates a global spinlock symbol that is visible to the whole kernel. This is unintended in the code, fix it. Fixes: 687db2207b1b ("gpu: host1x: Add DMA fence implementation") Signed-off-by: Dmitry Osipenko Reviewed-by: Mikko Perttunen Signed-off-by: Thierry Reding --- drivers/gpu/host1x/fence.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/host1x/fence.c b/drivers/gpu/host1x/fence.c index 6941add95d0f..e49083b0b09e 100644 --- a/drivers/gpu/host1x/fence.c +++ b/drivers/gpu/host1x/fence.c @@ -15,7 +15,7 @@ #include "intr.h" #include "syncpt.h" -DEFINE_SPINLOCK(lock); +static DEFINE_SPINLOCK(lock); struct host1x_syncpt_fence { struct dma_fence base; -- cgit From c3dbfb9c49eef7d07904e5fd5e158dd6688bbab3 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 2 Sep 2021 22:33:09 +0200 Subject: gpu: host1x: Plug potential memory leak The memory allocated for a DMA fence could be leaked if the code failed to allocate the waiter object. Make sure to release the fence allocation on failure. Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Thierry Reding --- drivers/gpu/host1x/fence.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/host1x/fence.c b/drivers/gpu/host1x/fence.c index e49083b0b09e..ecab72882192 100644 --- a/drivers/gpu/host1x/fence.c +++ b/drivers/gpu/host1x/fence.c @@ -152,8 +152,10 @@ struct dma_fence *host1x_fence_create(struct host1x_syncpt *sp, u32 threshold) return ERR_PTR(-ENOMEM); fence->waiter = kzalloc(sizeof(*fence->waiter), GFP_KERNEL); - if (!fence->waiter) + if (!fence->waiter) { + kfree(fence); return ERR_PTR(-ENOMEM); + } fence->sp = sp; fence->threshold = threshold; -- cgit From 39a71f712d8a13728febd8f3cb3f6db7e1fa7221 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 15 Sep 2021 15:28:06 -0600 Subject: selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix get_warnings_count() to check fscanf() return value to get rid of the following warning: x86_64/mmio_warning_test.c: In function ‘get_warnings_count’: x86_64/mmio_warning_test.c:85:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 85 | fscanf(f, "%d", &warnings); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan --- tools/testing/selftests/kvm/x86_64/mmio_warning_test.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c b/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c index e6480fd5c4bd..8039e1eff938 100644 --- a/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c +++ b/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c @@ -82,7 +82,8 @@ int get_warnings_count(void) FILE *f; f = popen("dmesg | grep \"WARNING:\" | wc -l", "r"); - fscanf(f, "%d", &warnings); + if (fscanf(f, "%d", &warnings) < 1) + warnings = 0; fclose(f); return warnings; -- cgit From 3a4f0cc693cd3d80e66a255f0bff0e2c0461eef1 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 15 Sep 2021 15:28:07 -0600 Subject: selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix get_trans_hugepagesz() to check fscanf() return value to get rid of the following warning: lib/test_util.c: In function ‘get_trans_hugepagesz’: lib/test_util.c:138:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 138 | fscanf(f, "%ld", &size); | ^~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan --- tools/testing/selftests/kvm/lib/test_util.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/lib/test_util.c b/tools/testing/selftests/kvm/lib/test_util.c index af1031fed97f..938cd423643e 100644 --- a/tools/testing/selftests/kvm/lib/test_util.c +++ b/tools/testing/selftests/kvm/lib/test_util.c @@ -129,13 +129,16 @@ size_t get_trans_hugepagesz(void) { size_t size; FILE *f; + int ret; TEST_ASSERT(thp_configured(), "THP is not configured in host kernel"); f = fopen("/sys/kernel/mm/transparent_hugepage/hpage_pmd_size", "r"); TEST_ASSERT(f != NULL, "Error in opening transparent_hugepage/hpage_pmd_size"); - fscanf(f, "%ld", &size); + ret = fscanf(f, "%ld", &size); + ret = fscanf(f, "%ld", &size); + TEST_ASSERT(ret < 1, "Error reading transparent_hugepage/hpage_pmd_size"); fclose(f); return size; -- cgit From 20175d5eac5bb94a7a3719ef275337fc9abf26ac Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 15 Sep 2021 15:28:08 -0600 Subject: selftests: kvm: move get_run_delay() into lib/test_util get_run_delay() is defined static in xen_shinfo_test and steal_time test. Move it to lib and remove code duplication. Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan --- tools/testing/selftests/kvm/include/test_util.h | 1 + tools/testing/selftests/kvm/lib/test_util.c | 15 +++++++++++++++ tools/testing/selftests/kvm/steal_time.c | 15 --------------- tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c | 15 --------------- 4 files changed, 16 insertions(+), 30 deletions(-) diff --git a/tools/testing/selftests/kvm/include/test_util.h b/tools/testing/selftests/kvm/include/test_util.h index d79be15dd3d2..c7409b9b4e5b 100644 --- a/tools/testing/selftests/kvm/include/test_util.h +++ b/tools/testing/selftests/kvm/include/test_util.h @@ -102,6 +102,7 @@ const struct vm_mem_backing_src_alias *vm_mem_backing_src_alias(uint32_t i); size_t get_backing_src_pagesz(uint32_t i); void backing_src_help(void); enum vm_mem_backing_src_type parse_backing_src_type(const char *type_name); +long get_run_delay(void); /* * Whether or not the given source type is shared memory (as opposed to diff --git a/tools/testing/selftests/kvm/lib/test_util.c b/tools/testing/selftests/kvm/lib/test_util.c index 938cd423643e..f80dd38a38b2 100644 --- a/tools/testing/selftests/kvm/lib/test_util.c +++ b/tools/testing/selftests/kvm/lib/test_util.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include "linux/kernel.h" @@ -303,3 +304,17 @@ enum vm_mem_backing_src_type parse_backing_src_type(const char *type_name) TEST_FAIL("Unknown backing src type: %s", type_name); return -1; } + +long get_run_delay(void) +{ + char path[64]; + long val[2]; + FILE *fp; + + sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); + fp = fopen(path, "r"); + fscanf(fp, "%ld %ld ", &val[0], &val[1]); + fclose(fp); + + return val[1]; +} diff --git a/tools/testing/selftests/kvm/steal_time.c b/tools/testing/selftests/kvm/steal_time.c index ecec30865a74..51fe95a5c36a 100644 --- a/tools/testing/selftests/kvm/steal_time.c +++ b/tools/testing/selftests/kvm/steal_time.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include @@ -217,20 +216,6 @@ static void steal_time_dump(struct kvm_vm *vm, uint32_t vcpuid) #endif -static long get_run_delay(void) -{ - char path[64]; - long val[2]; - FILE *fp; - - sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); - fp = fopen(path, "r"); - fscanf(fp, "%ld %ld ", &val[0], &val[1]); - fclose(fp); - - return val[1]; -} - static void *do_steal_time(void *arg) { struct timespec ts, stop; diff --git a/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c b/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c index 117bf49a3d79..eda0d2a51224 100644 --- a/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c +++ b/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c @@ -14,7 +14,6 @@ #include #include #include -#include #define VCPU_ID 5 @@ -98,20 +97,6 @@ static void guest_code(void) GUEST_DONE(); } -static long get_run_delay(void) -{ - char path[64]; - long val[2]; - FILE *fp; - - sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); - fp = fopen(path, "r"); - fscanf(fp, "%ld %ld ", &val[0], &val[1]); - fclose(fp); - - return val[1]; -} - static int cmp_timespec(struct timespec *a, struct timespec *b) { if (a->tv_sec > b->tv_sec) -- cgit From f5013d412a43662b63f3d5f3a804d63213acd471 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 15 Sep 2021 15:28:09 -0600 Subject: selftests: kvm: fix get_run_delay() ignoring fscanf() return warn MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix get_run_delay() to check fscanf() return value to get rid of the following warning. When fscanf() fails return MIN_RUN_DELAY_NS from get_run_delay(). Move MIN_RUN_DELAY_NS from steal_time.c to test_util.h so get_run_delay() and steal_time.c can use it. lib/test_util.c: In function ‘get_run_delay’: lib/test_util.c:316:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 316 | fscanf(fp, "%ld %ld ", &val[0], &val[1]); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Acked-by: Paolo Bonzini Signed-off-by: Shuah Khan --- tools/testing/selftests/kvm/include/test_util.h | 2 ++ tools/testing/selftests/kvm/lib/test_util.c | 4 +++- tools/testing/selftests/kvm/steal_time.c | 1 - 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/include/test_util.h b/tools/testing/selftests/kvm/include/test_util.h index c7409b9b4e5b..451fed5ce8e7 100644 --- a/tools/testing/selftests/kvm/include/test_util.h +++ b/tools/testing/selftests/kvm/include/test_util.h @@ -95,6 +95,8 @@ struct vm_mem_backing_src_alias { uint32_t flag; }; +#define MIN_RUN_DELAY_NS 200000UL + bool thp_configured(void); size_t get_trans_hugepagesz(void); size_t get_def_hugetlb_pagesz(void); diff --git a/tools/testing/selftests/kvm/lib/test_util.c b/tools/testing/selftests/kvm/lib/test_util.c index f80dd38a38b2..a9107bfae402 100644 --- a/tools/testing/selftests/kvm/lib/test_util.c +++ b/tools/testing/selftests/kvm/lib/test_util.c @@ -313,7 +313,9 @@ long get_run_delay(void) sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); fp = fopen(path, "r"); - fscanf(fp, "%ld %ld ", &val[0], &val[1]); + /* Return MIN_RUN_DELAY_NS upon failure just to be safe */ + if (fscanf(fp, "%ld %ld ", &val[0], &val[1]) < 2) + val[1] = MIN_RUN_DELAY_NS; fclose(fp); return val[1]; diff --git a/tools/testing/selftests/kvm/steal_time.c b/tools/testing/selftests/kvm/steal_time.c index 51fe95a5c36a..2172d65b85e4 100644 --- a/tools/testing/selftests/kvm/steal_time.c +++ b/tools/testing/selftests/kvm/steal_time.c @@ -19,7 +19,6 @@ #define NR_VCPUS 4 #define ST_GPA_BASE (1 << 30) -#define MIN_RUN_DELAY_NS 200000UL static void *st_gva[NR_VCPUS]; static uint64_t guest_stolen_time[NR_VCPUS]; -- cgit From e6fab7af6ba1bc77c78713a83876f60ca7a4a064 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Thu, 16 Sep 2021 21:31:51 +0300 Subject: hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc .. Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak Link: https://lore.kernel.org/r/20210916183151.869427-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck --- drivers/hwmon/mlxreg-fan.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c index 116681fde33d..89fe7b9fe26b 100644 --- a/drivers/hwmon/mlxreg-fan.c +++ b/drivers/hwmon/mlxreg-fan.c @@ -315,8 +315,8 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev, { struct mlxreg_fan *fan = cdev->devdata; unsigned long cur_state; + int i, config = 0; u32 regval; - int i; int err; /* @@ -329,6 +329,12 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev, * overwritten. */ if (state >= MLXREG_FAN_SPEED_MIN && state <= MLXREG_FAN_SPEED_MAX) { + /* + * This is configuration change, which is only supported through sysfs. + * For configuration non-zero value is to be returned to avoid thermal + * statistics update. + */ + config = 1; state -= MLXREG_FAN_MAX_STATE; for (i = 0; i < state; i++) fan->cooling_levels[i] = state; @@ -343,7 +349,7 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev, cur_state = MLXREG_FAN_PWM_DUTY2STATE(regval); if (state < cur_state) - return 0; + return config; state = cur_state; } @@ -359,7 +365,7 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev, dev_err(fan->dev, "Failed to write PWM duty\n"); return err; } - return 0; + return config; } static const struct thermal_cooling_device_ops mlxreg_fan_cooling_ops = { -- cgit From 129803e642ac3d828b3c73ff10f570c42d962ef8 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 25 Aug 2021 09:41:22 +0200 Subject: pinctrl: core: Remove duplicated word from devm_pinctrl_unregister() Remove duplicated "which" from devm_pinctrl_unregister() kernel doc description. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/8b75e5dfd9363f35ebdd7812e119757379678f97.1629877281.git.michal.simek@xilinx.com Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index a4ac87c8b4f8..5082102d7d0d 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -2306,7 +2306,7 @@ EXPORT_SYMBOL_GPL(devm_pinctrl_register_and_init); /** * devm_pinctrl_unregister() - Resource managed version of pinctrl_unregister(). - * @dev: device for which which resource was allocated + * @dev: device for which resource was allocated * @pctldev: the pinctrl device to unregister. */ void devm_pinctrl_unregister(struct device *dev, struct pinctrl_dev *pctldev) -- cgit From e9a9970bf520c99e530d8f1fa5b5c22671fad4ef Mon Sep 17 00:00:00 2001 From: Russ Weight Date: Thu, 16 Sep 2021 14:07:33 -0700 Subject: fpga: dfl: Avoid reads to AFU CSRs during enumeration CSR address space for Accelerator Functional Units (AFU) is not available during the early Device Feature List (DFL) enumeration. Early access to this space results in invalid data and port errors. This change adds a condition to prevent an early read from the AFU CSR space. Fixes: 1604986c3e6b ("fpga: dfl: expose feature revision from struct dfl_device") Cc: stable@vger.kernel.org Signed-off-by: Russ Weight Signed-off-by: Moritz Fischer --- drivers/fpga/dfl.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c index c99b78ee008a..f86666cf2c6a 100644 --- a/drivers/fpga/dfl.c +++ b/drivers/fpga/dfl.c @@ -1019,16 +1019,18 @@ create_feature_instance(struct build_feature_devs_info *binfo, { unsigned int irq_base, nr_irqs; struct dfl_feature_info *finfo; + u8 revision = 0; int ret; - u8 revision; u64 v; - v = readq(binfo->ioaddr + ofst); - revision = FIELD_GET(DFH_REVISION, v); + if (fid != FEATURE_ID_AFU) { + v = readq(binfo->ioaddr + ofst); + revision = FIELD_GET(DFH_REVISION, v); - /* read feature size and id if inputs are invalid */ - size = size ? size : feature_size(v); - fid = fid ? fid : feature_id(v); + /* read feature size and id if inputs are invalid */ + size = size ? size : feature_size(v); + fid = fid ? fid : feature_id(v); + } if (binfo->len - ofst < size) return -EINVAL; -- cgit From 7e6f8d6f4a42ef9b693ff1b49267c546931d4619 Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Tue, 31 Aug 2021 17:36:12 +0530 Subject: pinctrl: amd: Add irq field data pinctrl_amd use gpiochip_get_data() to get their local state containers back from the gpiochip passed as amd_gpio chip data. Hence added irq field data to get directly using amd_gpio chip data. Signed-off-by: Basavaraj Natikar Tested-by: Mario Limonciello Acked-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20210831120613.1514899-2-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 9 ++++----- drivers/pinctrl/pinctrl-amd.h | 1 + 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index c001f2ed20f8..8292bd5c13f3 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -902,7 +902,6 @@ static struct pinctrl_desc amd_pinctrl_desc = { static int amd_gpio_probe(struct platform_device *pdev) { int ret = 0; - int irq_base; struct resource *res; struct amd_gpio *gpio_dev; struct gpio_irq_chip *girq; @@ -925,9 +924,9 @@ static int amd_gpio_probe(struct platform_device *pdev) if (!gpio_dev->base) return -ENOMEM; - irq_base = platform_get_irq(pdev, 0); - if (irq_base < 0) - return irq_base; + gpio_dev->irq = platform_get_irq(pdev, 0); + if (gpio_dev->irq < 0) + return gpio_dev->irq; #ifdef CONFIG_PM_SLEEP gpio_dev->saved_regs = devm_kcalloc(&pdev->dev, amd_pinctrl_desc.npins, @@ -987,7 +986,7 @@ static int amd_gpio_probe(struct platform_device *pdev) goto out2; } - ret = devm_request_irq(&pdev->dev, irq_base, amd_gpio_irq_handler, + ret = devm_request_irq(&pdev->dev, gpio_dev->irq, amd_gpio_irq_handler, IRQF_SHARED, KBUILD_MODNAME, gpio_dev); if (ret) goto out2; diff --git a/drivers/pinctrl/pinctrl-amd.h b/drivers/pinctrl/pinctrl-amd.h index 95e763424042..1d4317073654 100644 --- a/drivers/pinctrl/pinctrl-amd.h +++ b/drivers/pinctrl/pinctrl-amd.h @@ -98,6 +98,7 @@ struct amd_gpio { struct resource *res; struct platform_device *pdev; u32 *saved_regs; + int irq; }; /* KERNCZ configuration*/ -- cgit From acd47b9f28e55b505aedb842131b40904e151d7c Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Tue, 31 Aug 2021 17:36:13 +0530 Subject: pinctrl: amd: Handle wake-up interrupt Enable/disable power management wakeup mode, which is disabled by default. enable_irq_wake enables wakes the system from sleep. Hence added enable/disable irq_wake to handle wake-up interrupt. Signed-off-by: Basavaraj Natikar Tested-by: Mario Limonciello Acked-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20210831120613.1514899-3-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 8292bd5c13f3..8d0f88e9ca88 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -445,6 +445,7 @@ static int amd_gpio_irq_set_wake(struct irq_data *d, unsigned int on) struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct amd_gpio *gpio_dev = gpiochip_get_data(gc); u32 wake_mask = BIT(WAKE_CNTRL_OFF_S0I3) | BIT(WAKE_CNTRL_OFF_S3); + int err; raw_spin_lock_irqsave(&gpio_dev->lock, flags); pin_reg = readl(gpio_dev->base + (d->hwirq)*4); @@ -457,6 +458,15 @@ static int amd_gpio_irq_set_wake(struct irq_data *d, unsigned int on) writel(pin_reg, gpio_dev->base + (d->hwirq)*4); raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); + if (on) + err = enable_irq_wake(gpio_dev->irq); + else + err = disable_irq_wake(gpio_dev->irq); + + if (err) + dev_err(&gpio_dev->pdev->dev, "failed to %s wake-up interrupt\n", + on ? "enable" : "disable"); + return 0; } -- cgit From d36a97736b2cc9b13db0dfdf6f32b115ec193614 Mon Sep 17 00:00:00 2001 From: David Collins Date: Thu, 16 Sep 2021 18:51:37 +0530 Subject: pinctrl: qcom: spmi-gpio: correct parent irqspec translation pmic_gpio_child_to_parent_hwirq() and gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl- spmi-gpio irqspec to an SPMI controller irqspec. When they do this, they use a fixed SPMI slave ID of 0 and a fixed GPIO peripheral offset of 0xC0 (corresponding to SPMI address 0xC000). This translation results in an incorrect irqspec for secondary PMICs that don't have a slave ID of 0 as well as for PMIC chips which have GPIO peripherals located at a base address other than 0xC000. Correct this issue by passing the slave ID of the pinctrl-spmi- gpio device's parent in the SPMI controller irqspec and by calculating the peripheral ID base from the device tree 'reg' property of the pinctrl-spmi-gpio device. Signed-off-by: David Collins Signed-off-by: satya priya Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip") Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1631798498-10864-2-git-send-email-skakit@codeaurora.org Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 37 +++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 98bf0e2a2a8d..b2562e893139 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. + * Copyright (c) 2012-2014, 2016-2021 The Linux Foundation. All rights reserved. */ #include @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -171,6 +172,8 @@ struct pmic_gpio_state { struct pinctrl_dev *ctrl; struct gpio_chip chip; struct irq_chip irq; + u8 usid; + u8 pid_base; }; static const struct pinconf_generic_params pmic_gpio_bindings[] = { @@ -949,12 +952,36 @@ static int pmic_gpio_child_to_parent_hwirq(struct gpio_chip *chip, unsigned int *parent_hwirq, unsigned int *parent_type) { - *parent_hwirq = child_hwirq + 0xc0; + struct pmic_gpio_state *state = gpiochip_get_data(chip); + + *parent_hwirq = child_hwirq + state->pid_base; *parent_type = child_type; return 0; } +static void *pmic_gpio_populate_parent_fwspec(struct gpio_chip *chip, + unsigned int parent_hwirq, + unsigned int parent_type) +{ + struct pmic_gpio_state *state = gpiochip_get_data(chip); + struct irq_fwspec *fwspec; + + fwspec = kzalloc(sizeof(*fwspec), GFP_KERNEL); + if (!fwspec) + return NULL; + + fwspec->fwnode = chip->irq.parent_domain->fwnode; + + fwspec->param_count = 4; + fwspec->param[0] = state->usid; + fwspec->param[1] = parent_hwirq; + /* param[2] must be left as 0 */ + fwspec->param[3] = parent_type; + + return fwspec; +} + static int pmic_gpio_probe(struct platform_device *pdev) { struct irq_domain *parent_domain; @@ -965,6 +992,7 @@ static int pmic_gpio_probe(struct platform_device *pdev) struct pmic_gpio_pad *pad, *pads; struct pmic_gpio_state *state; struct gpio_irq_chip *girq; + const struct spmi_device *parent_spmi_dev; int ret, npins, i; u32 reg; @@ -984,6 +1012,9 @@ static int pmic_gpio_probe(struct platform_device *pdev) state->dev = &pdev->dev; state->map = dev_get_regmap(dev->parent, NULL); + parent_spmi_dev = to_spmi_device(dev->parent); + state->usid = parent_spmi_dev->usid; + state->pid_base = reg >> 8; pindesc = devm_kcalloc(dev, npins, sizeof(*pindesc), GFP_KERNEL); if (!pindesc) @@ -1059,7 +1090,7 @@ static int pmic_gpio_probe(struct platform_device *pdev) girq->fwnode = of_node_to_fwnode(state->dev->of_node); girq->parent_domain = parent_domain; girq->child_to_parent_hwirq = pmic_gpio_child_to_parent_hwirq; - girq->populate_parent_alloc_arg = gpiochip_populate_parent_fwspec_fourcell; + girq->populate_parent_alloc_arg = pmic_gpio_populate_parent_fwspec; girq->child_offset_to_irq = pmic_gpio_child_offset_to_irq; girq->child_irq_domain_ops.translate = pmic_gpio_domain_translate; -- cgit From e8f69b16ee776da88589b5271e3f46020efc8f6c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 12:12:04 +0200 Subject: net: hso: fix muxed tty registration If resource allocation and registration fail for a muxed tty device (e.g. if there are no more minor numbers) the driver should not try to deregister the never-registered (or already-deregistered) tty. Fix up the error handling to avoid dereferencing a NULL pointer when attempting to remove the character device. Fixes: 72dc1c096c70 ("HSO: add option hso driver") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index a57251ba5991..f97813a4e8d1 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2719,14 +2719,14 @@ struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface, serial = kzalloc(sizeof(*serial), GFP_KERNEL); if (!serial) - goto exit; + goto err_free_dev; hso_dev->port_data.dev_serial = serial; serial->parent = hso_dev; if (hso_serial_common_create (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE)) - goto exit; + goto err_free_serial; serial->tx_data_length--; serial->write_data = hso_mux_serial_write_data; @@ -2742,11 +2742,9 @@ struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface, /* done, return it */ return hso_dev; -exit: - if (serial) { - tty_unregister_device(tty_drv, serial->minor); - kfree(serial); - } +err_free_serial: + kfree(serial); +err_free_dev: kfree(hso_dev); return NULL; -- cgit From 23ca067b3295d935835b71f743235f9e5ab31cc5 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 1 Sep 2021 10:44:03 +0200 Subject: mm: Fully initialize invalidate_lock, amend lock class later The function __init_rwsem() is not part of the official API, it just a helper function used by init_rwsem(). Changing the lock's class and name should be done by using lockdep_set_class_and_name() after the has been fully initialized. The overhead of the additional class struct and setting it twice is negligible and it works across all locks. Fully initialize the lock with init_rwsem() and then set the custom class and name for the lock. Fixes: 730633f0b7f95 ("mm: Protect operations adding pages to page cache with invalidate_lock") Link: https://lore.kernel.org/r/20210901084403.g4fezi23cixemlhh@linutronix.de Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Jan Kara --- fs/inode.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/inode.c b/fs/inode.c index 37710ca863b5..ed0cab8a32db 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -190,8 +190,10 @@ int inode_init_always(struct super_block *sb, struct inode *inode) mapping_set_gfp_mask(mapping, GFP_HIGHUSER_MOVABLE); mapping->private_data = NULL; mapping->writeback_index = 0; - __init_rwsem(&mapping->invalidate_lock, "mapping.invalidate_lock", - &sb->s_type->invalidate_lock_key); + init_rwsem(&mapping->invalidate_lock); + lockdep_set_class_and_name(&mapping->invalidate_lock, + &sb->s_type->invalidate_lock_key, + "mapping.invalidate_lock"); inode->i_private = NULL; inode->i_mapping = mapping; INIT_HLIST_HEAD(&inode->i_dentry); /* buggered by rcu freeing */ -- cgit From 3abe2eec87059260bf31033a8863c67c5d45b9d0 Mon Sep 17 00:00:00 2001 From: Trevor Wu Date: Fri, 17 Sep 2021 16:28:05 +0800 Subject: ASoC: mediatek: mt8195: remove wrong fixup assignment on HDMITX S24_LE params fixup is only required for DPTX. Remove fixup ops assignment for HDMITX. Fixes: 40d605df0a7b ("ASoC: mediatek: mt8195: add machine driver with mt6359, rt1019 and rt5682") Signed-off-by: Trevor Wu Link: https://lore.kernel.org/r/20210917082805.30898-1-trevor.wu@mediatek.com Signed-off-by: Mark Brown --- sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c index c97ace7387b4..de09f67c0450 100644 --- a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c +++ b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c @@ -424,8 +424,8 @@ static int mt8195_hdmi_codec_init(struct snd_soc_pcm_runtime *rtd) return snd_soc_component_set_jack(cmpnt_codec, &priv->hdmi_jack, NULL); } -static int mt8195_hdmitx_dptx_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, - struct snd_pcm_hw_params *params) +static int mt8195_dptx_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) { /* fix BE i2s format to 32bit, clean param mask first */ @@ -902,7 +902,7 @@ static struct snd_soc_dai_link mt8195_mt6359_rt1019_rt5682_dai_links[] = { .no_pcm = 1, .dpcm_playback = 1, .ops = &mt8195_dptx_ops, - .be_hw_params_fixup = mt8195_hdmitx_dptx_hw_params_fixup, + .be_hw_params_fixup = mt8195_dptx_hw_params_fixup, SND_SOC_DAILINK_REG(DPTX_BE), }, [DAI_LINK_ETDM1_IN_BE] = { @@ -953,7 +953,6 @@ static struct snd_soc_dai_link mt8195_mt6359_rt1019_rt5682_dai_links[] = { SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .dpcm_playback = 1, - .be_hw_params_fixup = mt8195_hdmitx_dptx_hw_params_fixup, SND_SOC_DAILINK_REG(ETDM3_OUT_BE), }, [DAI_LINK_PCM1_BE] = { -- cgit From cfacfefd382af3b42905108b54f02820dca225c4 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 17 Sep 2021 11:51:08 +0300 Subject: ASoC: SOF: trace: Omit error print when waking up trace sleepers Do not print error message from snd_sof_trace_notify_for_error() when possible sleeping trace work is woken up to flush the remaining debug information. This action by itself is not an error, it is just an action we take when an error occurs to make sure that all information have been fed to the userspace (if we have trace in use). Signed-off-by: Peter Ujfalusi Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20210917085108.25532-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/trace.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/sof/trace.c b/sound/soc/sof/trace.c index f72a6e83e6af..58f6ca5cf491 100644 --- a/sound/soc/sof/trace.c +++ b/sound/soc/sof/trace.c @@ -530,7 +530,6 @@ void snd_sof_trace_notify_for_error(struct snd_sof_dev *sdev) return; if (sdev->dtrace_is_enabled) { - dev_err(sdev->dev, "error: waking up any trace sleepers\n"); sdev->dtrace_error = true; wake_up(&sdev->trace_sleep); } -- cgit From dc9660590d106bb58d145233fffca4efadad3655 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 16 Sep 2021 16:41:02 +0200 Subject: regulator: max14577: Revert "regulator: max14577: Add proper module aliases strings" This reverts commit 0da6736ecd10b45e535b100acd58df2db4c099d8. The MODULE_DEVICE_TABLE already creates proper alias. Having another MODULE_ALIAS causes the alias to be duplicated: $ modinfo max14577-regulator.ko alias: platform:max77836-regulator alias: platform:max14577-regulator description: Maxim 14577/77836 regulator driver alias: platform:max77836-regulator alias: platform:max14577-regulator Cc: Marek Szyprowski Fixes: 0da6736ecd10 ("regulator: max14577: Add proper module aliases strings") Signed-off-by: Krzysztof Kozlowski Tested-by: Marek Szyprowski Link: https://lore.kernel.org/r/20210916144102.120980-1-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown --- drivers/regulator/max14577-regulator.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/regulator/max14577-regulator.c b/drivers/regulator/max14577-regulator.c index 1d78b455cc48..e34face736f4 100644 --- a/drivers/regulator/max14577-regulator.c +++ b/drivers/regulator/max14577-regulator.c @@ -269,5 +269,3 @@ module_exit(max14577_regulator_exit); MODULE_AUTHOR("Krzysztof Kozlowski "); MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:max14577-regulator"); -MODULE_ALIAS("platform:max77836-regulator"); -- cgit From 3c9cfb5269f76d447dbadb67835368f3111a91d7 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 14:17:35 +0300 Subject: net: update NXP copyright text NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/ocelot/felix.c | 2 +- drivers/net/dsa/ocelot/felix.h | 2 +- drivers/net/dsa/ocelot/felix_vsc9959.c | 2 +- drivers/net/dsa/sja1105/sja1105_clocking.c | 2 +- drivers/net/dsa/sja1105/sja1105_devlink.c | 2 +- drivers/net/dsa/sja1105/sja1105_flower.c | 2 +- drivers/net/dsa/sja1105/sja1105_mdio.c | 2 +- drivers/net/dsa/sja1105/sja1105_spi.c | 2 +- drivers/net/dsa/sja1105/sja1105_static_config.c | 2 +- drivers/net/dsa/sja1105/sja1105_static_config.h | 2 +- drivers/net/dsa/sja1105/sja1105_vl.c | 2 +- drivers/net/dsa/sja1105/sja1105_vl.h | 2 +- drivers/net/ethernet/freescale/enetc/enetc_ierb.c | 2 +- drivers/net/ethernet/freescale/enetc/enetc_ierb.h | 2 +- drivers/net/ethernet/mscc/ocelot_devlink.c | 2 +- drivers/net/ethernet/mscc/ocelot_mrp.c | 2 +- drivers/net/ethernet/mscc/ocelot_net.c | 2 +- drivers/net/pcs/pcs-xpcs-nxp.c | 2 +- include/linux/dsa/ocelot.h | 2 +- include/linux/packing.h | 2 +- lib/packing.c | 2 +- net/dsa/tag_ocelot.c | 2 +- net/dsa/tag_ocelot_8021q.c | 2 +- tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh | 2 +- 24 files changed, 24 insertions(+), 24 deletions(-) diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index 3656e67af789..a3a9636430d6 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2019-2021 NXP Semiconductors +/* Copyright 2019-2021 NXP * * This is an umbrella module for all network switches that are * register-compatible with Ocelot and that perform I/O to their host CPU diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h index 5854bab43327..54024b6f9498 100644 --- a/drivers/net/dsa/ocelot/felix.h +++ b/drivers/net/dsa/ocelot/felix.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright 2019 NXP Semiconductors +/* Copyright 2019 NXP */ #ifndef _MSCC_FELIX_H #define _MSCC_FELIX_H diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c index f966a253d1c7..9e2ac8e46619 100644 --- a/drivers/net/dsa/ocelot/felix_vsc9959.c +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) /* Copyright 2017 Microsemi Corporation - * Copyright 2018-2019 NXP Semiconductors + * Copyright 2018-2019 NXP */ #include #include diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c index 387a1f2f161c..5bbf1707f2af 100644 --- a/drivers/net/dsa/sja1105/sja1105_clocking.c +++ b/drivers/net/dsa/sja1105/sja1105_clocking.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean */ #include diff --git a/drivers/net/dsa/sja1105/sja1105_devlink.c b/drivers/net/dsa/sja1105/sja1105_devlink.c index 05c7f4ca3b1a..0569ff066634 100644 --- a/drivers/net/dsa/sja1105/sja1105_devlink.c +++ b/drivers/net/dsa/sja1105/sja1105_devlink.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2018-2019, Vladimir Oltean - * Copyright 2020 NXP Semiconductors + * Copyright 2020 NXP */ #include "sja1105.h" diff --git a/drivers/net/dsa/sja1105/sja1105_flower.c b/drivers/net/dsa/sja1105/sja1105_flower.c index 6c10ffa968ce..72b9b39b0989 100644 --- a/drivers/net/dsa/sja1105/sja1105_flower.c +++ b/drivers/net/dsa/sja1105/sja1105_flower.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2020, NXP Semiconductors +/* Copyright 2020 NXP */ #include "sja1105.h" #include "sja1105_vl.h" diff --git a/drivers/net/dsa/sja1105/sja1105_mdio.c b/drivers/net/dsa/sja1105/sja1105_mdio.c index 705d3900e43a..215dd17ca790 100644 --- a/drivers/net/dsa/sja1105/sja1105_mdio.c +++ b/drivers/net/dsa/sja1105/sja1105_mdio.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2021, NXP Semiconductors +/* Copyright 2021 NXP */ #include #include diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c index d60a530d0272..d3c9ad6d39d4 100644 --- a/drivers/net/dsa/sja1105/sja1105_spi.c +++ b/drivers/net/dsa/sja1105/sja1105_spi.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH * Copyright (c) 2018-2019, Vladimir Oltean */ diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c index 7a422ef4deb6..baba204ad62f 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.c +++ b/drivers/net/dsa/sja1105/sja1105_static_config.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean */ #include "sja1105_static_config.h" diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.h b/drivers/net/dsa/sja1105/sja1105_static_config.h index bce0f5c03d0b..6a372d5f22ae 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.h +++ b/drivers/net/dsa/sja1105/sja1105_static_config.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: BSD-3-Clause */ -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean */ #ifndef _SJA1105_STATIC_CONFIG_H diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c index ec7b65daec20..6802f4057cc0 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.c +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2020, NXP Semiconductors +/* Copyright 2020 NXP */ #include #include diff --git a/drivers/net/dsa/sja1105/sja1105_vl.h b/drivers/net/dsa/sja1105/sja1105_vl.h index 173d78963fed..51fba0dce91a 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.h +++ b/drivers/net/dsa/sja1105/sja1105_vl.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright 2020, NXP Semiconductors +/* Copyright 2020 NXP */ #ifndef _SJA1105_VL_H #define _SJA1105_VL_H diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ierb.c b/drivers/net/ethernet/freescale/enetc/enetc_ierb.c index ee1468e3eaa3..91f02c505028 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_ierb.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_ierb.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* Copyright 2021 NXP Semiconductors +/* Copyright 2021 NXP * * The Integrated Endpoint Register Block (IERB) is configured by pre-boot * software and is supposed to be to ENETC what a NVRAM is to a 'real' PCIe diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ierb.h b/drivers/net/ethernet/freescale/enetc/enetc_ierb.h index b3b774e0998a..c2ce47c4be9f 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_ierb.h +++ b/drivers/net/ethernet/freescale/enetc/enetc_ierb.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ -/* Copyright 2021 NXP Semiconductors */ +/* Copyright 2021 NXP */ #include #include diff --git a/drivers/net/ethernet/mscc/ocelot_devlink.c b/drivers/net/ethernet/mscc/ocelot_devlink.c index edafbd37d12c..b8737efd2a85 100644 --- a/drivers/net/ethernet/mscc/ocelot_devlink.c +++ b/drivers/net/ethernet/mscc/ocelot_devlink.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright 2020-2021 NXP Semiconductors +/* Copyright 2020-2021 NXP */ #include #include "ocelot.h" diff --git a/drivers/net/ethernet/mscc/ocelot_mrp.c b/drivers/net/ethernet/mscc/ocelot_mrp.c index 08b481a93460..4b0941f09f71 100644 --- a/drivers/net/ethernet/mscc/ocelot_mrp.c +++ b/drivers/net/ethernet/mscc/ocelot_mrp.c @@ -2,7 +2,7 @@ /* Microsemi Ocelot Switch driver * * Copyright (c) 2017, 2019 Microsemi Corporation - * Copyright 2020-2021 NXP Semiconductors + * Copyright 2020-2021 NXP */ #include diff --git a/drivers/net/ethernet/mscc/ocelot_net.c b/drivers/net/ethernet/mscc/ocelot_net.c index c0c465a4a981..e54b9fb2a97a 100644 --- a/drivers/net/ethernet/mscc/ocelot_net.c +++ b/drivers/net/ethernet/mscc/ocelot_net.c @@ -5,7 +5,7 @@ * mscc_ocelot_switch_lib. * * Copyright (c) 2017, 2019 Microsemi Corporation - * Copyright 2020-2021 NXP Semiconductors + * Copyright 2020-2021 NXP */ #include diff --git a/drivers/net/pcs/pcs-xpcs-nxp.c b/drivers/net/pcs/pcs-xpcs-nxp.c index 984c9f7f16a8..d16fc58cd48d 100644 --- a/drivers/net/pcs/pcs-xpcs-nxp.c +++ b/drivers/net/pcs/pcs-xpcs-nxp.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2021 NXP Semiconductors +/* Copyright 2021 NXP */ #include #include "pcs-xpcs.h" diff --git a/include/linux/dsa/ocelot.h b/include/linux/dsa/ocelot.h index c6bc45ae5e03..435777a0073c 100644 --- a/include/linux/dsa/ocelot.h +++ b/include/linux/dsa/ocelot.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ #ifndef _NET_DSA_TAG_OCELOT_H diff --git a/include/linux/packing.h b/include/linux/packing.h index 54667735cc67..8d6571feb95d 100644 --- a/include/linux/packing.h +++ b/include/linux/packing.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: BSD-3-Clause - * Copyright (c) 2016-2018, NXP Semiconductors + * Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean */ #ifndef _LINUX_PACKING_H diff --git a/lib/packing.c b/lib/packing.c index 6ed72dccfdb5..9a72f4bbf0e2 100644 --- a/lib/packing.c +++ b/lib/packing.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 -/* Copyright (c) 2016-2018, NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright (c) 2018-2019, Vladimir Oltean */ #include diff --git a/net/dsa/tag_ocelot.c b/net/dsa/tag_ocelot.c index d37ab98e7fe1..8025ed778d33 100644 --- a/net/dsa/tag_ocelot.c +++ b/net/dsa/tag_ocelot.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2019 NXP Semiconductors +/* Copyright 2019 NXP */ #include #include diff --git a/net/dsa/tag_ocelot_8021q.c b/net/dsa/tag_ocelot_8021q.c index 3038a257ba05..59072930cb02 100644 --- a/net/dsa/tag_ocelot_8021q.c +++ b/net/dsa/tag_ocelot_8021q.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2020-2021 NXP Semiconductors +/* Copyright 2020-2021 NXP * * An implementation of the software-defined tag_8021q.c tagger format, which * also preserves full functionality under a vlan_filtering bridge. It does diff --git a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh index beee0d5646a6..f7d84549cc3e 100755 --- a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh +++ b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh @@ -1,6 +1,6 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -# Copyright 2020 NXP Semiconductors +# Copyright 2020 NXP WAIT_TIME=1 NUM_NETIFS=4 -- cgit From 02319bf15acf54004216e40ac9c171437f24be24 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 16 Sep 2021 14:33:35 -0700 Subject: net: dsa: bcm_sf2: Fix array overrun in bcm_sf2_num_active_ports() After d12e1c464988 ("net: dsa: b53: Set correct number of ports in the DSA struct") we stopped setting dsa_switch::num_ports to DSA_MAX_PORTS, which created an off by one error between the statically allocated bcm_sf2_priv::port_sts array (of size DSA_MAX_PORTS). When dsa_is_cpu_port() is used, we end-up accessing an out of bounds member and causing a NPD. Fix this by iterating with the appropriate port count using ds->num_ports. Fixes: d12e1c464988 ("net: dsa: b53: Set correct number of ports in the DSA struct") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 6ce9ec1283e0..b6c4b3adb171 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -68,7 +68,7 @@ static unsigned int bcm_sf2_num_active_ports(struct dsa_switch *ds) struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); unsigned int port, count = 0; - for (port = 0; port < ARRAY_SIZE(priv->port_sts); port++) { + for (port = 0; port < ds->num_ports; port++) { if (dsa_is_cpu_port(ds, port)) continue; if (priv->port_sts[port].enabled) -- cgit From a9b3043de47b7f8cbe38c36aee572526665b6315 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Sun, 12 Sep 2021 11:56:26 +0900 Subject: ksmbd: transport_rdma: Don't include rwlock.h directly rwlock.h specifically asks to not be included directly. In fact, the proper spinlock.h include isn't needed either, it comes with the huge pile that kthread.h ends up pulling in, so just drop it entirely. Signed-off-by: Mike Galbraith Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/transport_rdma.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ksmbd/transport_rdma.c b/fs/ksmbd/transport_rdma.c index 52b2556e76b1..3a7fa23ba850 100644 --- a/fs/ksmbd/transport_rdma.c +++ b/fs/ksmbd/transport_rdma.c @@ -20,7 +20,6 @@ #define SUBMOD_NAME "smb_direct" #include -#include #include #include #include -- cgit From 89c485c7a3ecbc2ebd568f9c9c2edf3a8cf7485b Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 16 Sep 2021 17:24:54 -0400 Subject: NLM: Fix svcxdr_encode_owner() Dai Ngo reports that, since the XDR overhaul, the NLM server crashes when the TEST procedure wants to return NLM_DENIED. There is a bug in svcxdr_encode_owner() that none of our standard test cases found. Replace the open-coded function with a call to an appropriate pre-fabricated XDR helper. Reported-by: Dai Ngo Fixes: a6a63ca5652e ("lockd: Common NLM XDR helpers") Signed-off-by: Chuck Lever --- fs/lockd/svcxdr.h | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/fs/lockd/svcxdr.h b/fs/lockd/svcxdr.h index c69a0bb76c94..4f1a451da5ba 100644 --- a/fs/lockd/svcxdr.h +++ b/fs/lockd/svcxdr.h @@ -134,18 +134,9 @@ svcxdr_decode_owner(struct xdr_stream *xdr, struct xdr_netobj *obj) static inline bool svcxdr_encode_owner(struct xdr_stream *xdr, const struct xdr_netobj *obj) { - unsigned int quadlen = XDR_QUADLEN(obj->len); - __be32 *p; - - if (xdr_stream_encode_u32(xdr, obj->len) < 0) - return false; - p = xdr_reserve_space(xdr, obj->len); - if (!p) + if (obj->len > XDR_MAX_NETOBJ) return false; - p[quadlen - 1] = 0; /* XDR pad */ - memcpy(p, obj->data, obj->len); - - return true; + return xdr_stream_encode_opaque(xdr, obj->data, obj->len) > 0; } #endif /* _LOCKD_SVCXDR_H_ */ -- cgit From 02579b2ff8b0becfb51d85a975908ac4ab15fba8 Mon Sep 17 00:00:00 2001 From: Dai Ngo Date: Thu, 16 Sep 2021 14:22:12 -0400 Subject: nfsd: back channel stuck in SEQ4_STATUS_CB_PATH_DOWN When the back channel enters SEQ4_STATUS_CB_PATH_DOWN state, the client recovers by sending BIND_CONN_TO_SESSION but the server fails to recover the back channel and leaves it as NFSD4_CB_DOWN. Fix by enhancing nfsd4_bind_conn_to_session to probe the back channel by calling nfsd4_probe_callback. Signed-off-by: Dai Ngo Signed-off-by: Chuck Lever --- fs/nfsd/nfs4state.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 4b6d60b46b0a..ba8bab17175e 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -3570,7 +3570,7 @@ static struct nfsd4_conn *__nfsd4_find_conn(struct svc_xprt *xpt, struct nfsd4_s } static __be32 nfsd4_match_existing_connection(struct svc_rqst *rqst, - struct nfsd4_session *session, u32 req) + struct nfsd4_session *session, u32 req, struct nfsd4_conn **conn) { struct nfs4_client *clp = session->se_client; struct svc_xprt *xpt = rqst->rq_xprt; @@ -3593,6 +3593,8 @@ static __be32 nfsd4_match_existing_connection(struct svc_rqst *rqst, else status = nfserr_inval; spin_unlock(&clp->cl_lock); + if (status == nfs_ok && conn) + *conn = c; return status; } @@ -3617,8 +3619,16 @@ __be32 nfsd4_bind_conn_to_session(struct svc_rqst *rqstp, status = nfserr_wrong_cred; if (!nfsd4_mach_creds_match(session->se_client, rqstp)) goto out; - status = nfsd4_match_existing_connection(rqstp, session, bcts->dir); - if (status == nfs_ok || status == nfserr_inval) + status = nfsd4_match_existing_connection(rqstp, session, + bcts->dir, &conn); + if (status == nfs_ok) { + if (bcts->dir == NFS4_CDFC4_FORE_OR_BOTH || + bcts->dir == NFS4_CDFC4_BACK) + conn->cn_flags |= NFS4_CDFC4_BACK; + nfsd4_probe_callback(session->se_client); + goto out; + } + if (status == nfserr_inval) goto out; status = nfsd4_map_bcts_dir(&bcts->dir); if (status) -- cgit From bbc9a6eb5eec03dcafee266b19f56295e3b2aa8f Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Tue, 17 Aug 2021 07:55:40 +0800 Subject: btrfs: replace BUG_ON() in btrfs_csum_one_bio() with proper error handling There is a BUG_ON() in btrfs_csum_one_bio() to catch code logic error. It has indeed caught several bugs during subpage development. But the BUG_ON() itself will bring down the whole system which is an overkill. Replace it with a WARN() and exit gracefully, so that it won't crash the whole system while we can still catch the code logic error. Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/file-item.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index 2673c6ba7a4e..0b9401a5afd3 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -665,7 +665,18 @@ blk_status_t btrfs_csum_one_bio(struct btrfs_inode *inode, struct bio *bio, if (!ordered) { ordered = btrfs_lookup_ordered_extent(inode, offset); - BUG_ON(!ordered); /* Logic error */ + /* + * The bio range is not covered by any ordered extent, + * must be a code logic error. + */ + if (unlikely(!ordered)) { + WARN(1, KERN_WARNING + "no ordered extent for root %llu ino %llu offset %llu\n", + inode->root->root_key.objectid, + btrfs_ino(inode), offset); + kvfree(sums); + return BLK_STS_IOERR; + } } nr_sectors = BTRFS_BYTES_TO_BLKS(fs_info, -- cgit From acbee9aff8aea4b9b66ab3d5cee6b8dbc153dc38 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 8 Sep 2021 16:29:26 +0100 Subject: btrfs: fix transaction handle leak after verity rollback failure During a verity rollback, if we fail to update the inode or delete the orphan, we abort the transaction and return without releasing our transaction handle. Fix that by releasing the handle. Fixes: 146054090b0859 ("btrfs: initial fsverity support") Fixes: 705242538ff348 ("btrfs: verity metadata orphan items") Reviewed-by: Boris Burkov Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/verity.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/verity.c b/fs/btrfs/verity.c index 28d443d3ef93..4968535dfff0 100644 --- a/fs/btrfs/verity.c +++ b/fs/btrfs/verity.c @@ -451,7 +451,7 @@ static int del_orphan(struct btrfs_trans_handle *trans, struct btrfs_inode *inod */ static int rollback_verity(struct btrfs_inode *inode) { - struct btrfs_trans_handle *trans; + struct btrfs_trans_handle *trans = NULL; struct btrfs_root *root = inode->root; int ret; @@ -473,6 +473,7 @@ static int rollback_verity(struct btrfs_inode *inode) trans = btrfs_start_transaction(root, 2); if (IS_ERR(trans)) { ret = PTR_ERR(trans); + trans = NULL; btrfs_handle_fs_error(root->fs_info, ret, "failed to start transaction in verity rollback %llu", (u64)inode->vfs_inode.i_ino); @@ -490,8 +491,9 @@ static int rollback_verity(struct btrfs_inode *inode) btrfs_abort_transaction(trans, ret); goto out; } - btrfs_end_transaction(trans); out: + if (trans) + btrfs_end_transaction(trans); return ret; } -- cgit From 6b225baababf1e3d41a4250e802cbd193e1343fb Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 8 Sep 2021 19:05:44 +0100 Subject: btrfs: fix mount failure due to past and transient device flush error When we get an error flushing one device, during a super block commit, we record the error in the device structure, in the field 'last_flush_error'. This is used to later check if we should error out the super block commit, depending on whether the number of flush errors is greater than or equals to the maximum tolerated device failures for a raid profile. However if we get a transient device flush error, unmount the filesystem and later try to mount it, we can fail the mount because we treat that past error as critical and consider the device is missing. Even if it's very likely that the error will happen again, as it's probably due to a hardware related problem, there may be cases where the error might not happen again. One example is during testing, and a test case like the new generic/648 from fstests always triggers this. The test cases generic/019 and generic/475 also trigger this scenario, but very sporadically. When this happens we get an error like this: $ mount /dev/sdc /mnt mount: /mnt wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or helper program, or other error. $ dmesg (...) [12918.886926] BTRFS warning (device sdc): chunk 13631488 missing 1 devices, max tolerance is 0 for writable mount [12918.888293] BTRFS warning (device sdc): writable mount is not allowed due to too many missing devices [12918.890853] BTRFS error (device sdc): open_ctree failed The failure happens because when btrfs_check_rw_degradable() is called at mount time, or at remount from RO to RW time, is sees a non zero value in a device's ->last_flush_error attribute, and therefore considers that the device is 'missing'. Fix this by setting a device's ->last_flush_error to zero when we close a device, making sure the error is not seen on the next mount attempt. We only need to track flush errors during the current mount, so that we never commit a super block if such errors happened. Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/volumes.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 464485aa7318..2ec3b8ac8fa3 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1137,6 +1137,19 @@ static void btrfs_close_one_device(struct btrfs_device *device) atomic_set(&device->dev_stats_ccnt, 0); extent_io_tree_release(&device->alloc_state); + /* + * Reset the flush error record. We might have a transient flush error + * in this mount, and if so we aborted the current transaction and set + * the fs to an error state, guaranteeing no super blocks can be further + * committed. However that error might be transient and if we unmount the + * filesystem and mount it again, we should allow the mount to succeed + * (btrfs_check_rw_degradable() should not fail) - if after mounting the + * filesystem again we still get flush errors, then we will again abort + * any transaction and set the error state, guaranteeing no commits of + * unsafe super blocks. + */ + device->last_flush_error = 0; + /* Verify the device is back in a pristine state */ ASSERT(!test_bit(BTRFS_DEV_STATE_FLUSH_SENT, &device->dev_state)); ASSERT(!test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state)); -- cgit From 0619b7901473c380abc05d45cf9c70bee0707db3 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Thu, 16 Sep 2021 20:43:29 +0800 Subject: btrfs: prevent __btrfs_dump_space_info() to underflow its free space It's not uncommon where __btrfs_dump_space_info() gets called under over-commit situations. In that case free space would underflow as total allocated space is not enough to handle all the over-committed space. Such underflow values can sometimes cause confusion for users enabled enospc_debug mount option, and takes some seconds for developers to convert the underflow value to signed result. Just output the free space as s64 to avoid such problem. Reported-by: Eli V Link: https://lore.kernel.org/linux-btrfs/CAJtFHUSy4zgyhf-4d9T+KdJp9w=UgzC2A0V=VtmaeEpcGgm1-Q@mail.gmail.com/ CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Anand Jain Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/space-info.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/space-info.c b/fs/btrfs/space-info.c index 5ada02e0e629..aa5be0b24987 100644 --- a/fs/btrfs/space-info.c +++ b/fs/btrfs/space-info.c @@ -414,9 +414,10 @@ static void __btrfs_dump_space_info(struct btrfs_fs_info *fs_info, { lockdep_assert_held(&info->lock); - btrfs_info(fs_info, "space_info %llu has %llu free, is %sfull", + /* The free space could be negative in case of overcommit */ + btrfs_info(fs_info, "space_info %llu has %lld free, is %sfull", info->flags, - info->total_bytes - btrfs_space_info_used(info, true), + (s64)(info->total_bytes - btrfs_space_info_used(info, true)), info->full ? "" : "not "); btrfs_info(fs_info, "space_info total=%llu, used=%llu, pinned=%llu, reserved=%llu, may_use=%llu, readonly=%llu zone_unusable=%llu", -- cgit From e3fc065682ebbbd15b0ce0036800f4acbf765d46 Mon Sep 17 00:00:00 2001 From: Rohith Surabattula Date: Fri, 17 Sep 2021 18:14:26 +0000 Subject: cifs: Deferred close performance improvements During unlink/rename instead of closing all the deferred handles under tcon, close only handles under the requested dentry. Signed-off-by: Rohith Surabattula Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 3 +++ fs/cifs/inode.c | 6 +++--- fs/cifs/misc.c | 37 +++++++++++++++++++++++++++++++++++++ 3 files changed, 43 insertions(+), 3 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 54966c1a8eb6..d0f85b666662 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -267,6 +267,9 @@ extern void cifs_close_deferred_file(struct cifsInodeInfo *cifs_inode); extern void cifs_close_all_deferred_files(struct cifs_tcon *cifs_tcon); +extern void cifs_close_deferred_file_under_dentry(struct cifs_tcon *cifs_tcon, + const char *path); + extern struct TCP_Server_Info *cifs_get_tcp_session(struct smb3_fs_context *ctx); extern void cifs_put_tcp_session(struct TCP_Server_Info *server, int from_reconnect); diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 19af2d0ec8d5..82848412ad85 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1624,7 +1624,7 @@ int cifs_unlink(struct inode *dir, struct dentry *dentry) goto unlink_out; } - cifs_close_deferred_file(CIFS_I(inode)); + cifs_close_deferred_file_under_dentry(tcon, full_path); if (cap_unix(tcon->ses) && (CIFS_UNIX_POSIX_PATH_OPS_CAP & le64_to_cpu(tcon->fsUnixInfo.Capability))) { rc = CIFSPOSIXDelFile(xid, tcon, full_path, @@ -2113,9 +2113,9 @@ cifs_rename2(struct user_namespace *mnt_userns, struct inode *source_dir, goto cifs_rename_exit; } - cifs_close_deferred_file(CIFS_I(d_inode(source_dentry))); + cifs_close_deferred_file_under_dentry(tcon, from_name); if (d_inode(target_dentry) != NULL) - cifs_close_deferred_file(CIFS_I(d_inode(target_dentry))); + cifs_close_deferred_file_under_dentry(tcon, to_name); rc = cifs_do_rename(xid, source_dentry, from_name, target_dentry, to_name); diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index f4313935e734..05138f92d905 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -780,6 +780,43 @@ cifs_close_all_deferred_files(struct cifs_tcon *tcon) kfree(tmp_list); } } +void +cifs_close_deferred_file_under_dentry(struct cifs_tcon *tcon, const char *path) +{ + struct cifsFileInfo *cfile; + struct list_head *tmp; + struct file_list *tmp_list, *tmp_next_list; + struct list_head file_head; + void *page; + const char *full_path; + + INIT_LIST_HEAD(&file_head); + page = alloc_dentry_path(); + spin_lock(&tcon->open_file_lock); + list_for_each(tmp, &tcon->openFileList) { + cfile = list_entry(tmp, struct cifsFileInfo, tlist); + full_path = build_path_from_dentry(cfile->dentry, page); + if (strstr(full_path, path)) { + if (delayed_work_pending(&cfile->deferred)) { + if (cancel_delayed_work(&cfile->deferred)) { + tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC); + if (tmp_list == NULL) + break; + tmp_list->cfile = cfile; + list_add_tail(&tmp_list->list, &file_head); + } + } + } + } + spin_unlock(&tcon->open_file_lock); + + list_for_each_entry_safe(tmp_list, tmp_next_list, &file_head, list) { + _cifsFileInfo_put(tmp_list->cfile, true, false); + list_del(&tmp_list->list); + kfree(tmp_list); + } + free_dentry_path(page); +} /* parses DFS refferal V3 structure * caller is responsible for freeing target_nodes -- cgit From 71826b068884050d5fdd37fda857ba1539c513d3 Mon Sep 17 00:00:00 2001 From: Rohith Surabattula Date: Fri, 17 Sep 2021 17:29:42 +0000 Subject: cifs: Fix soft lockup during fsstress Below traces are observed during fsstress and system got hung. [ 130.698396] watchdog: BUG: soft lockup - CPU#6 stuck for 26s! Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Rohith Surabattula Signed-off-by: Steve French --- fs/cifs/misc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 05138f92d905..03da00eb7c04 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -735,7 +735,7 @@ cifs_close_deferred_file(struct cifsInodeInfo *cifs_inode) if (cancel_delayed_work(&cfile->deferred)) { tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC); if (tmp_list == NULL) - continue; + break; tmp_list->cfile = cfile; list_add_tail(&tmp_list->list, &file_head); } @@ -766,7 +766,7 @@ cifs_close_all_deferred_files(struct cifs_tcon *tcon) if (cancel_delayed_work(&cfile->deferred)) { tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC); if (tmp_list == NULL) - continue; + break; tmp_list->cfile = cfile; list_add_tail(&tmp_list->list, &file_head); } -- cgit From 35866f3f779aef5e7ba84e4d1023fe2e2a0e219e Mon Sep 17 00:00:00 2001 From: Rohith Surabattula Date: Fri, 17 Sep 2021 16:50:40 -0500 Subject: cifs: Not to defer close on file when lock is set Close file immediately when lock is set. Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Rohith Surabattula Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 1 + fs/cifs/file.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 7dd9878e26bf..e916470468ea 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -1399,6 +1399,7 @@ struct cifsInodeInfo { #define CIFS_INO_INVALID_MAPPING (4) /* pagecache is invalid */ #define CIFS_INO_LOCK (5) /* lock bit for synchronization */ #define CIFS_INO_MODIFIED_ATTR (6) /* Indicate change in mtime/ctime */ +#define CIFS_INO_CLOSE_ON_LOCK (7) /* Not to defer the close when lock is set */ unsigned long flags; spinlock_t writers_lock; unsigned int writers; /* Number of writers on this inode */ diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 4d10c9343890..6796fc73b304 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -882,6 +882,7 @@ int cifs_close(struct inode *inode, struct file *file) dclose = kmalloc(sizeof(struct cifs_deferred_close), GFP_KERNEL); if ((cinode->oplock == CIFS_CACHE_RHW_FLG) && cinode->lease_granted && + !test_bit(CIFS_INO_CLOSE_ON_LOCK, &cinode->flags) && dclose) { if (test_bit(CIFS_INO_MODIFIED_ATTR, &cinode->flags)) { inode->i_ctime = inode->i_mtime = current_time(inode); @@ -1864,6 +1865,7 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *flock) cifs_read_flock(flock, &type, &lock, &unlock, &wait_flag, tcon->ses->server); cifs_sb = CIFS_FILE_SB(file); + set_bit(CIFS_INO_CLOSE_ON_LOCK, &CIFS_I(d_inode(cfile->dentry))->flags); if (cap_unix(tcon->ses) && (CIFS_UNIX_FCNTL_CAP & le64_to_cpu(tcon->fsUnixInfo.Capability)) && -- cgit From f58eae6c5fa882d6d0a6b7587a099602a59d57b5 Mon Sep 17 00:00:00 2001 From: Hyunchul Lee Date: Fri, 17 Sep 2021 22:14:08 +0900 Subject: ksmbd: prevent out of share access Because of .., files outside the share directory could be accessed. To prevent this, normalize the given path and remove all . and .. components. In addition to the usual large set of regression tests (smbtorture and xfstests), ran various tests on this to specifically check path name validation including libsmb2 tests to verify path normalization: ./examples/smb2-ls-async smb://172.30.1.15/homes2/../ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../../ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/..bar/ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar../ ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar.. ./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar../../../../ Signed-off-by: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/misc.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++------- fs/ksmbd/misc.h | 3 +-- fs/ksmbd/smb2pdu.c | 14 ++++++---- 3 files changed, 77 insertions(+), 16 deletions(-) diff --git a/fs/ksmbd/misc.c b/fs/ksmbd/misc.c index 0b307ca28a19..3eac3c01749f 100644 --- a/fs/ksmbd/misc.c +++ b/fs/ksmbd/misc.c @@ -191,19 +191,77 @@ int get_nlink(struct kstat *st) return nlink; } -void ksmbd_conv_path_to_unix(char *path) +char *ksmbd_conv_path_to_unix(char *path) { + size_t path_len, remain_path_len, out_path_len; + char *out_path, *out_next; + int i, pre_dotdot_cnt = 0, slash_cnt = 0; + bool is_last; + strreplace(path, '\\', '/'); -} + path_len = strlen(path); + remain_path_len = path_len; + if (path_len == 0) + return ERR_PTR(-EINVAL); -void ksmbd_strip_last_slash(char *path) -{ - int len = strlen(path); + out_path = kzalloc(path_len + 2, GFP_KERNEL); + if (!out_path) + return ERR_PTR(-ENOMEM); + out_path_len = 0; + out_next = out_path; + + do { + char *name = path + path_len - remain_path_len; + char *next = strchrnul(name, '/'); + size_t name_len = next - name; + + is_last = !next[0]; + if (name_len == 2 && name[0] == '.' && name[1] == '.') { + pre_dotdot_cnt++; + /* handle the case that path ends with "/.." */ + if (is_last) + goto follow_dotdot; + } else { + if (pre_dotdot_cnt) { +follow_dotdot: + slash_cnt = 0; + for (i = out_path_len - 1; i >= 0; i--) { + if (out_path[i] == '/' && + ++slash_cnt == pre_dotdot_cnt + 1) + break; + } + + if (i < 0 && + slash_cnt != pre_dotdot_cnt) { + kfree(out_path); + return ERR_PTR(-EINVAL); + } + + out_next = &out_path[i+1]; + *out_next = '\0'; + out_path_len = i + 1; - while (len && path[len - 1] == '/') { - path[len - 1] = '\0'; - len--; - } + } + + if (name_len != 0 && + !(name_len == 1 && name[0] == '.') && + !(name_len == 2 && name[0] == '.' && name[1] == '.')) { + next[0] = '\0'; + sprintf(out_next, "%s/", name); + out_next += name_len + 1; + out_path_len += name_len + 1; + next[0] = '/'; + } + pre_dotdot_cnt = 0; + } + + remain_path_len -= name_len + 1; + } while (!is_last); + + if (out_path_len > 0) + out_path[out_path_len-1] = '\0'; + path[path_len] = '\0'; + return out_path; } void ksmbd_conv_path_to_windows(char *path) diff --git a/fs/ksmbd/misc.h b/fs/ksmbd/misc.h index af8717d4d85b..b7b10139ada2 100644 --- a/fs/ksmbd/misc.h +++ b/fs/ksmbd/misc.h @@ -16,8 +16,7 @@ int ksmbd_validate_filename(char *filename); int parse_stream_name(char *filename, char **stream_name, int *s_type); char *convert_to_nt_pathname(char *filename, char *sharepath); int get_nlink(struct kstat *st); -void ksmbd_conv_path_to_unix(char *path); -void ksmbd_strip_last_slash(char *path); +char *ksmbd_conv_path_to_unix(char *path); void ksmbd_conv_path_to_windows(char *path); char *ksmbd_extract_sharename(char *treename); char *convert_to_unix_name(struct ksmbd_share_config *share, char *name); diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index c86164dc70bb..46e0275a77a8 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -634,7 +634,7 @@ static char * smb2_get_name(struct ksmbd_share_config *share, const char *src, const int maxlen, struct nls_table *local_nls) { - char *name, *unixname; + char *name, *norm_name, *unixname; name = smb_strndup_from_utf16(src, maxlen, 1, local_nls); if (IS_ERR(name)) { @@ -643,11 +643,15 @@ smb2_get_name(struct ksmbd_share_config *share, const char *src, } /* change it to absolute unix name */ - ksmbd_conv_path_to_unix(name); - ksmbd_strip_last_slash(name); - - unixname = convert_to_unix_name(share, name); + norm_name = ksmbd_conv_path_to_unix(name); + if (IS_ERR(norm_name)) { + kfree(name); + return norm_name; + } kfree(name); + + unixname = convert_to_unix_name(share, norm_name); + kfree(norm_name); if (!unixname) { pr_err("can not convert absolute name\n"); return ERR_PTR(-ENOMEM); -- cgit From e7165b1dff06b6e4373ab7758b21f3d9ed8a64ca Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 14 Sep 2021 00:49:25 +0200 Subject: pinctrl/rockchip: add a queue for deferred pin output settings on probe The separation of pinctrl and gpio drivers created a tiny window where a pinconfig setting might produce a null-pointer dereference. The affected device were rk3288-veyron devices in this case. Pinctrl-hogs are claimed when the pinctrl driver is registered, at which point their pinconfig settings will be applied. At this time the now separate gpio devices will not have been created yet and the matching driver won't have probed yet, making the gpio->foo() call run into a null-ptr. As probing is not really guaranteed to have been completed at a specific time, introduce a queue that can hold the output settings until the gpio driver has probed and will (in a separate patch) fetch the elements of the list. We expect the gpio driver to empty the list, but will nevertheless empty it ourself on remove if that didn't happen. Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes") Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20210913224926.1260726-4-heiko@sntech.de Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-rockchip.c | 67 ++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/pinctrl-rockchip.h | 10 ++++++ 2 files changed, 77 insertions(+) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index ae33e376695f..5ce260f152ce 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -2092,6 +2092,23 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl, return false; } +static int rockchip_pinconf_defer_output(struct rockchip_pin_bank *bank, + unsigned int pin, u32 arg) +{ + struct rockchip_pin_output_deferred *cfg; + + cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return -ENOMEM; + + cfg->pin = pin; + cfg->arg = arg; + + list_add_tail(&cfg->head, &bank->deferred_output); + + return 0; +} + /* set the pin config settings for a specified pin */ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, unsigned long *configs, unsigned num_configs) @@ -2136,6 +2153,22 @@ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, if (rc != RK_FUNC_GPIO) return -EINVAL; + /* + * Check for gpio driver not being probed yet. + * The lock makes sure that either gpio-probe has completed + * or the gpio driver hasn't probed yet. + */ + mutex_lock(&bank->deferred_lock); + if (!gpio || !gpio->direction_output) { + rc = rockchip_pinconf_defer_output(bank, pin - bank->pin_base, arg); + mutex_unlock(&bank->deferred_lock); + if (rc) + return rc; + + break; + } + mutex_unlock(&bank->deferred_lock); + rc = gpio->direction_output(gpio, pin - bank->pin_base, arg); if (rc) @@ -2204,6 +2237,11 @@ static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, if (rc != RK_FUNC_GPIO) return -EINVAL; + if (!gpio || !gpio->get) { + arg = 0; + break; + } + rc = gpio->get(gpio, pin - bank->pin_base); if (rc < 0) return rc; @@ -2450,6 +2488,9 @@ static int rockchip_pinctrl_register(struct platform_device *pdev, pin_bank->name, pin); pdesc++; } + + INIT_LIST_HEAD(&pin_bank->deferred_output); + mutex_init(&pin_bank->deferred_lock); } ret = rockchip_pinctrl_parse_dt(pdev, info); @@ -2716,6 +2757,31 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev) return 0; } +static int rockchip_pinctrl_remove(struct platform_device *pdev) +{ + struct rockchip_pinctrl *info = platform_get_drvdata(pdev); + struct rockchip_pin_bank *bank; + struct rockchip_pin_output_deferred *cfg; + int i; + + of_platform_depopulate(&pdev->dev); + + for (i = 0; i < info->ctrl->nr_banks; i++) { + bank = &info->ctrl->pin_banks[i]; + + mutex_lock(&bank->deferred_lock); + while (!list_empty(&bank->deferred_output)) { + cfg = list_first_entry(&bank->deferred_output, + struct rockchip_pin_output_deferred, head); + list_del(&cfg->head); + kfree(cfg); + } + mutex_unlock(&bank->deferred_lock); + } + + return 0; +} + static struct rockchip_pin_bank px30_pin_banks[] = { PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, @@ -3175,6 +3241,7 @@ static const struct of_device_id rockchip_pinctrl_dt_match[] = { static struct platform_driver rockchip_pinctrl_driver = { .probe = rockchip_pinctrl_probe, + .remove = rockchip_pinctrl_remove, .driver = { .name = "rockchip-pinctrl", .pm = &rockchip_pinctrl_dev_pm_ops, diff --git a/drivers/pinctrl/pinctrl-rockchip.h b/drivers/pinctrl/pinctrl-rockchip.h index 589d4d2a98c9..91f10279d084 100644 --- a/drivers/pinctrl/pinctrl-rockchip.h +++ b/drivers/pinctrl/pinctrl-rockchip.h @@ -141,6 +141,8 @@ struct rockchip_drv { * @toggle_edge_mode: bit mask to toggle (falling/rising) edge mode * @recalced_mask: bit mask to indicate a need to recalulate the mask * @route_mask: bits describing the routing pins of per bank + * @deferred_output: gpio output settings to be done after gpio bank probed + * @deferred_lock: mutex for the deferred_output shared btw gpio and pinctrl */ struct rockchip_pin_bank { struct device *dev; @@ -169,6 +171,8 @@ struct rockchip_pin_bank { u32 toggle_edge_mode; u32 recalced_mask; u32 route_mask; + struct list_head deferred_output; + struct mutex deferred_lock; }; /** @@ -243,6 +247,12 @@ struct rockchip_pin_config { unsigned int nconfigs; }; +struct rockchip_pin_output_deferred { + struct list_head head; + unsigned int pin; + u32 arg; +}; + /** * struct rockchip_pin_group: represent group of pins of a pinmux function. * @name: name of the pin group, used to lookup the group. -- cgit From 59dd178e1d7cb6cac03b32aba7ed9bbce6761b6f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 14 Sep 2021 00:49:26 +0200 Subject: gpio/rockchip: fetch deferred output settings on probe Fetch the output settings the pinctrl driver may have created for pinctrl hogs and set the relevant pins as requested. Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes") Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20210913224926.1260726-5-heiko@sntech.de Signed-off-by: Linus Walleij --- drivers/gpio/gpio-rockchip.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index 036b2d959503..d67c64a39e47 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -689,6 +689,7 @@ static int rockchip_gpio_probe(struct platform_device *pdev) struct device_node *pctlnp = of_get_parent(np); struct pinctrl_dev *pctldev = NULL; struct rockchip_pin_bank *bank = NULL; + struct rockchip_pin_output_deferred *cfg; static int gpio; int id, ret; @@ -716,12 +717,33 @@ static int rockchip_gpio_probe(struct platform_device *pdev) if (ret) return ret; + /* + * Prevent clashes with a deferred output setting + * being added right at this moment. + */ + mutex_lock(&bank->deferred_lock); + ret = rockchip_gpiolib_register(bank); if (ret) { clk_disable_unprepare(bank->clk); + mutex_unlock(&bank->deferred_lock); return ret; } + while (!list_empty(&bank->deferred_output)) { + cfg = list_first_entry(&bank->deferred_output, + struct rockchip_pin_output_deferred, head); + list_del(&cfg->head); + + ret = rockchip_gpio_direction_output(&bank->gpio_chip, cfg->pin, cfg->arg); + if (ret) + dev_warn(dev, "setting output pin %u to %u failed\n", cfg->pin, cfg->arg); + + kfree(cfg); + } + + mutex_unlock(&bank->deferred_lock); + platform_set_drvdata(pdev, bank); dev_info(dev, "probed %pOF\n", np); -- cgit From 6d56262c3d224699b29b9bb6b4ace8bab7d692c2 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 18 Sep 2021 18:45:12 +0900 Subject: ksmbd: add validation for FILE_FULL_EA_INFORMATION of smb2_get_info MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add validation to check whether req->InputBufferLength is smaller than smb2_ea_info_req structure size. Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Steve French Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 46e0275a77a8..6304c9bda479 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -4045,6 +4045,10 @@ static int smb2_get_ea(struct ksmbd_work *work, struct ksmbd_file *fp, path = &fp->filp->f_path; /* single EA entry is requested with given user.* name */ if (req->InputBufferLength) { + if (le32_to_cpu(req->InputBufferLength) < + sizeof(struct smb2_ea_info_req)) + return -EINVAL; + ea_req = (struct smb2_ea_info_req *)req->Buffer; } else { /* need to send all EAs, if no specific EA is requested*/ -- cgit From f0c15b360fb65ee39849afe987c16eb3d0175d0d Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 14 Sep 2021 16:57:46 +0200 Subject: media: ir_toy: prevent device from hanging during transmit If the IR Toy is receiving IR while a transmit is done, it may end up hanging. We can prevent this from happening by re-entering sample mode just before issuing the transmit command. Link: https://github.com/bengtmartensson/HarcHardware/discussions/25 Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ir_toy.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/media/rc/ir_toy.c b/drivers/media/rc/ir_toy.c index 3e729a17b35f..48d52baec1a1 100644 --- a/drivers/media/rc/ir_toy.c +++ b/drivers/media/rc/ir_toy.c @@ -24,6 +24,7 @@ static const u8 COMMAND_VERSION[] = { 'v' }; // End transmit and repeat reset command so we exit sump mode static const u8 COMMAND_RESET[] = { 0xff, 0xff, 0, 0, 0, 0, 0 }; static const u8 COMMAND_SMODE_ENTER[] = { 's' }; +static const u8 COMMAND_SMODE_EXIT[] = { 0 }; static const u8 COMMAND_TXSTART[] = { 0x26, 0x24, 0x25, 0x03 }; #define REPLY_XMITCOUNT 't' @@ -309,12 +310,30 @@ static int irtoy_tx(struct rc_dev *rc, uint *txbuf, uint count) buf[i] = cpu_to_be16(v); } - buf[count] = cpu_to_be16(0xffff); + buf[count] = 0xffff; irtoy->tx_buf = buf; irtoy->tx_len = size; irtoy->emitted = 0; + // There is an issue where if the unit is receiving IR while the + // first TXSTART command is sent, the device might end up hanging + // with its led on. It does not respond to any command when this + // happens. To work around this, re-enter sample mode. + err = irtoy_command(irtoy, COMMAND_SMODE_EXIT, + sizeof(COMMAND_SMODE_EXIT), STATE_RESET); + if (err) { + dev_err(irtoy->dev, "exit sample mode: %d\n", err); + return err; + } + + err = irtoy_command(irtoy, COMMAND_SMODE_ENTER, + sizeof(COMMAND_SMODE_ENTER), STATE_COMMAND); + if (err) { + dev_err(irtoy->dev, "enter sample mode: %d\n", err); + return err; + } + err = irtoy_command(irtoy, COMMAND_TXSTART, sizeof(COMMAND_TXSTART), STATE_TX); kfree(buf); -- cgit From cf9579976f724ad517cc15b7caadea728c7e245c Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 16:34:32 +0300 Subject: net: mdio: introduce a shutdown method to mdio device drivers MDIO-attached devices might have interrupts and other things that might need quiesced when we kexec into a new kernel. Things are even more creepy when those interrupt lines are shared, and in that case it is absolutely mandatory to disable all interrupt sources. Moreover, MDIO devices might be DSA switches, and DSA needs its own shutdown method to unlink from the DSA master, which is a new requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"). So introduce a ->shutdown method in the MDIO device driver structure. Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/mdio_device.c | 11 +++++++++++ include/linux/mdio.h | 3 +++ 2 files changed, 14 insertions(+) diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c index c94cb5382dc9..250742ffdfd9 100644 --- a/drivers/net/phy/mdio_device.c +++ b/drivers/net/phy/mdio_device.c @@ -179,6 +179,16 @@ static int mdio_remove(struct device *dev) return 0; } +static void mdio_shutdown(struct device *dev) +{ + struct mdio_device *mdiodev = to_mdio_device(dev); + struct device_driver *drv = mdiodev->dev.driver; + struct mdio_driver *mdiodrv = to_mdio_driver(drv); + + if (mdiodrv->shutdown) + mdiodrv->shutdown(mdiodev); +} + /** * mdio_driver_register - register an mdio_driver with the MDIO layer * @drv: new mdio_driver to register @@ -193,6 +203,7 @@ int mdio_driver_register(struct mdio_driver *drv) mdiodrv->driver.bus = &mdio_bus_type; mdiodrv->driver.probe = mdio_probe; mdiodrv->driver.remove = mdio_remove; + mdiodrv->driver.shutdown = mdio_shutdown; retval = driver_register(&mdiodrv->driver); if (retval) { diff --git a/include/linux/mdio.h b/include/linux/mdio.h index ffb787d5ebde..5e6dc38f418e 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -80,6 +80,9 @@ struct mdio_driver { /* Clears up any memory if needed */ void (*remove)(struct mdio_device *mdiodev); + + /* Quiesces the device on system shutdown, turns off interrupts etc */ + void (*shutdown)(struct mdio_device *mdiodev); }; static inline struct mdio_driver * -- cgit From 0650bf52b31ff35dc6430fc2e37969c36baba724 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 16:34:33 +0300 Subject: net: dsa: be compatible with masters which unregister on shutdown Lino reports that on his system with bcmgenet as DSA master and KSZ9897 as a switch, rebooting or shutting down never works properly. What does the bcmgenet driver have special to trigger this, that other DSA masters do not? It has an implementation of ->shutdown which simply calls its ->remove implementation. Otherwise said, it unregisters its network interface on shutdown. This message can be seen in a loop, and it hangs the reboot process there: unregister_netdevice: waiting for eth0 to become free. Usage count = 3 So why 3? A usage count of 1 is normal for a registered network interface, and any virtual interface which links itself as an upper of that will increment it via dev_hold. In the case of DSA, this is the call path: dsa_slave_create -> netdev_upper_dev_link -> __netdev_upper_dev_link -> __netdev_adjacent_dev_insert -> dev_hold So a DSA switch with 3 interfaces will result in a usage count elevated by two, and netdev_wait_allrefs will wait until they have gone away. Other stacked interfaces, like VLAN, watch NETDEV_UNREGISTER events and delete themselves, but DSA cannot just vanish and go poof, at most it can unbind itself from the switch devices, but that must happen strictly earlier compared to when the DSA master unregisters its net_device, so reacting on the NETDEV_UNREGISTER event is way too late. It seems that it is a pretty established pattern to have a driver's ->shutdown hook redirect to its ->remove hook, so the same code is executed regardless of whether the driver is unbound from the device, or the system is just shutting down. As Florian puts it, it is quite a big hammer for bcmgenet to unregister its net_device during shutdown, but having a common code path with the driver unbind helps ensure it is well tested. So DSA, for better or for worse, has to live with that and engage in an arms race of implementing the ->shutdown hook too, from all individual drivers, and do something sane when paired with masters that unregister their net_device there. The only sane thing to do, of course, is to unlink from the master. However, complications arise really quickly. The pattern of redirecting ->shutdown to ->remove is not unique to bcmgenet or even to net_device drivers. In fact, SPI controllers do it too (see dspi_shutdown -> dspi_remove), and presumably, I2C controllers and MDIO controllers do it too (this is something I have not researched too deeply, but even if this is not the case today, it is certainly plausible to happen in the future, and must be taken into consideration). Since DSA switches might be SPI devices, I2C devices, MDIO devices, the insane implication is that for the exact same DSA switch device, we might have both ->shutdown and ->remove getting called. So we need to do something with that insane environment. The pattern I've come up with is "if this, then not that", so if either ->shutdown or ->remove gets called, we set the device's drvdata to NULL, and in the other hook, we check whether the drvdata is NULL and just do nothing. This is probably not necessary for platform devices, just for devices on buses, but I would really insist for consistency among drivers, because when code is copy-pasted, it is not always copy-pasted from the best sources. So depending on whether the DSA switch's ->remove or ->shutdown will get called first, we cannot really guarantee even for the same driver if rebooting will result in the same code path on all platforms. But nonetheless, we need to do something minimally reasonable on ->shutdown too to fix the bug. Of course, the ->remove will do more (a full teardown of the tree, with all data structures freed, and this is why the bug was not caught for so long). The new ->shutdown method is kept separate from dsa_unregister_switch not because we couldn't have unregistered the switch, but simply in the interest of doing something quick and to the point. The big question is: does the DSA switch's ->shutdown get called earlier than the DSA master's ->shutdown? If not, there is still a risk that we might still trigger the WARN_ON in unregister_netdevice that says we are attempting to unregister a net_device which has uppers. That's no good. Although the reference to the master net_device won't physically go away even if DSA's ->shutdown comes afterwards, remember we have a dev_hold on it. The answer to that question lies in this comment above device_link_add: * A side effect of the link creation is re-ordering of dpm_list and the * devices_kset list by moving the consumer device and all devices depending * on it to the ends of these lists (that does not happen to devices that have * not been registered when this function is called). so the fact that DSA uses device_link_add towards its master is not exactly for nothing. device_shutdown() walks devices_kset from the back, so this is our guarantee that DSA's shutdown happens before the master's shutdown. Fixes: 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo Signed-off-by: Vladimir Oltean Tested-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/b53/b53_mdio.c | 21 +++++++++++-- drivers/net/dsa/b53/b53_mmap.c | 13 ++++++++ drivers/net/dsa/b53/b53_priv.h | 5 +++ drivers/net/dsa/b53/b53_spi.c | 13 ++++++++ drivers/net/dsa/b53/b53_srab.c | 21 +++++++++++-- drivers/net/dsa/bcm_sf2.c | 12 +++++++ drivers/net/dsa/dsa_loop.c | 22 ++++++++++++- drivers/net/dsa/lan9303-core.c | 6 ++++ drivers/net/dsa/lan9303.h | 1 + drivers/net/dsa/lan9303_i2c.c | 24 +++++++++++--- drivers/net/dsa/lan9303_mdio.c | 15 +++++++++ drivers/net/dsa/lantiq_gswip.c | 18 +++++++++++ drivers/net/dsa/microchip/ksz8795_spi.c | 11 ++++++- drivers/net/dsa/microchip/ksz9477_i2c.c | 14 +++++++-- drivers/net/dsa/microchip/ksz9477_spi.c | 8 +++-- drivers/net/dsa/mt7530.c | 18 +++++++++++ drivers/net/dsa/mv88e6060.c | 18 +++++++++++ drivers/net/dsa/mv88e6xxx/chip.c | 22 ++++++++++++- drivers/net/dsa/ocelot/felix_vsc9959.c | 20 ++++++++++-- drivers/net/dsa/ocelot/seville_vsc9953.c | 20 ++++++++++-- drivers/net/dsa/qca/ar9331.c | 18 +++++++++++ drivers/net/dsa/qca8k.c | 18 +++++++++++ drivers/net/dsa/realtek-smi-core.c | 20 +++++++++++- drivers/net/dsa/sja1105/sja1105_main.c | 21 +++++++++++-- drivers/net/dsa/vitesse-vsc73xx-core.c | 6 ++++ drivers/net/dsa/vitesse-vsc73xx-platform.c | 22 ++++++++++++- drivers/net/dsa/vitesse-vsc73xx-spi.c | 22 ++++++++++++- drivers/net/dsa/vitesse-vsc73xx.h | 1 + include/net/dsa.h | 1 + net/dsa/dsa2.c | 50 ++++++++++++++++++++++++++++++ 30 files changed, 457 insertions(+), 24 deletions(-) diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c index a533a90e3904..a7aeb3c132c9 100644 --- a/drivers/net/dsa/b53/b53_mdio.c +++ b/drivers/net/dsa/b53/b53_mdio.c @@ -351,9 +351,25 @@ static int b53_mdio_probe(struct mdio_device *mdiodev) static void b53_mdio_remove(struct mdio_device *mdiodev) { struct b53_device *dev = dev_get_drvdata(&mdiodev->dev); - struct dsa_switch *ds = dev->ds; - dsa_unregister_switch(ds); + if (!dev) + return; + + b53_switch_remove(dev); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void b53_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct b53_device *dev = dev_get_drvdata(&mdiodev->dev); + + if (!dev) + return; + + b53_switch_shutdown(dev); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id b53_of_match[] = { @@ -373,6 +389,7 @@ MODULE_DEVICE_TABLE(of, b53_of_match); static struct mdio_driver b53_mdio_driver = { .probe = b53_mdio_probe, .remove = b53_mdio_remove, + .shutdown = b53_mdio_shutdown, .mdiodrv.driver = { .name = "bcm53xx", .of_match_table = b53_of_match, diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c index 82680e083cc2..ae4c79d39bc0 100644 --- a/drivers/net/dsa/b53/b53_mmap.c +++ b/drivers/net/dsa/b53/b53_mmap.c @@ -316,9 +316,21 @@ static int b53_mmap_remove(struct platform_device *pdev) if (dev) b53_switch_remove(dev); + platform_set_drvdata(pdev, NULL); + return 0; } +static void b53_mmap_shutdown(struct platform_device *pdev) +{ + struct b53_device *dev = platform_get_drvdata(pdev); + + if (dev) + b53_switch_shutdown(dev); + + platform_set_drvdata(pdev, NULL); +} + static const struct of_device_id b53_mmap_of_table[] = { { .compatible = "brcm,bcm3384-switch" }, { .compatible = "brcm,bcm6328-switch" }, @@ -331,6 +343,7 @@ MODULE_DEVICE_TABLE(of, b53_mmap_of_table); static struct platform_driver b53_mmap_driver = { .probe = b53_mmap_probe, .remove = b53_mmap_remove, + .shutdown = b53_mmap_shutdown, .driver = { .name = "b53-switch", .of_match_table = b53_mmap_of_table, diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h index 5d068acf7cf8..959a52d41f0a 100644 --- a/drivers/net/dsa/b53/b53_priv.h +++ b/drivers/net/dsa/b53/b53_priv.h @@ -228,6 +228,11 @@ static inline void b53_switch_remove(struct b53_device *dev) dsa_unregister_switch(dev->ds); } +static inline void b53_switch_shutdown(struct b53_device *dev) +{ + dsa_switch_shutdown(dev->ds); +} + #define b53_build_op(type_op_size, val_type) \ static inline int b53_##type_op_size(struct b53_device *dev, u8 page, \ u8 reg, val_type val) \ diff --git a/drivers/net/dsa/b53/b53_spi.c b/drivers/net/dsa/b53/b53_spi.c index ecb9f7f6b335..01e37b75471e 100644 --- a/drivers/net/dsa/b53/b53_spi.c +++ b/drivers/net/dsa/b53/b53_spi.c @@ -321,9 +321,21 @@ static int b53_spi_remove(struct spi_device *spi) if (dev) b53_switch_remove(dev); + spi_set_drvdata(spi, NULL); + return 0; } +static void b53_spi_shutdown(struct spi_device *spi) +{ + struct b53_device *dev = spi_get_drvdata(spi); + + if (dev) + b53_switch_shutdown(dev); + + spi_set_drvdata(spi, NULL); +} + static const struct of_device_id b53_spi_of_match[] = { { .compatible = "brcm,bcm5325" }, { .compatible = "brcm,bcm5365" }, @@ -344,6 +356,7 @@ static struct spi_driver b53_spi_driver = { }, .probe = b53_spi_probe, .remove = b53_spi_remove, + .shutdown = b53_spi_shutdown, }; module_spi_driver(b53_spi_driver); diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c index 3f4249de70c5..4591bb1c05d2 100644 --- a/drivers/net/dsa/b53/b53_srab.c +++ b/drivers/net/dsa/b53/b53_srab.c @@ -629,17 +629,34 @@ static int b53_srab_probe(struct platform_device *pdev) static int b53_srab_remove(struct platform_device *pdev) { struct b53_device *dev = platform_get_drvdata(pdev); - struct b53_srab_priv *priv = dev->priv; - b53_srab_intr_set(priv, false); + if (!dev) + return 0; + + b53_srab_intr_set(dev->priv, false); b53_switch_remove(dev); + platform_set_drvdata(pdev, NULL); + return 0; } +static void b53_srab_shutdown(struct platform_device *pdev) +{ + struct b53_device *dev = platform_get_drvdata(pdev); + + if (!dev) + return; + + b53_switch_shutdown(dev); + + platform_set_drvdata(pdev, NULL); +} + static struct platform_driver b53_srab_driver = { .probe = b53_srab_probe, .remove = b53_srab_remove, + .shutdown = b53_srab_shutdown, .driver = { .name = "b53-srab-switch", .of_match_table = b53_srab_of_match, diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index b6c4b3adb171..7578a5c38df5 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -1512,6 +1512,9 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev) { struct bcm_sf2_priv *priv = platform_get_drvdata(pdev); + if (!priv) + return 0; + priv->wol_ports_mask = 0; /* Disable interrupts */ bcm_sf2_intr_disable(priv); @@ -1523,6 +1526,8 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev) if (priv->type == BCM7278_DEVICE_ID) reset_control_assert(priv->rcdev); + platform_set_drvdata(pdev, NULL); + return 0; } @@ -1530,6 +1535,9 @@ static void bcm_sf2_sw_shutdown(struct platform_device *pdev) { struct bcm_sf2_priv *priv = platform_get_drvdata(pdev); + if (!priv) + return; + /* For a kernel about to be kexec'd we want to keep the GPHY on for a * successful MDIO bus scan to occur. If we did turn off the GPHY * before (e.g: port_disable), this will also power it back on. @@ -1538,6 +1546,10 @@ static void bcm_sf2_sw_shutdown(struct platform_device *pdev) */ if (priv->hw_params.num_gphy == 1) bcm_sf2_gphy_enable_set(priv->dev->ds, true); + + dsa_switch_shutdown(priv->dev->ds); + + platform_set_drvdata(pdev, NULL); } #ifdef CONFIG_PM_SLEEP diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c index bfdf3324aac3..e638e3eea911 100644 --- a/drivers/net/dsa/dsa_loop.c +++ b/drivers/net/dsa/dsa_loop.c @@ -340,10 +340,29 @@ static int dsa_loop_drv_probe(struct mdio_device *mdiodev) static void dsa_loop_drv_remove(struct mdio_device *mdiodev) { struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); - struct dsa_loop_priv *ps = ds->priv; + struct dsa_loop_priv *ps; + + if (!ds) + return; + + ps = ds->priv; dsa_unregister_switch(ds); dev_put(ps->netdev); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void dsa_loop_drv_shutdown(struct mdio_device *mdiodev) +{ + struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); + + if (!ds) + return; + + dsa_switch_shutdown(ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static struct mdio_driver dsa_loop_drv = { @@ -352,6 +371,7 @@ static struct mdio_driver dsa_loop_drv = { }, .probe = dsa_loop_drv_probe, .remove = dsa_loop_drv_remove, + .shutdown = dsa_loop_drv_shutdown, }; #define NUM_FIXED_PHYS (DSA_LOOP_NUM_PORTS - 2) diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c index d7ce281570b5..89f920289ae2 100644 --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -1379,6 +1379,12 @@ int lan9303_remove(struct lan9303 *chip) } EXPORT_SYMBOL(lan9303_remove); +void lan9303_shutdown(struct lan9303 *chip) +{ + dsa_switch_shutdown(chip->ds); +} +EXPORT_SYMBOL(lan9303_shutdown); + MODULE_AUTHOR("Juergen Borleis "); MODULE_DESCRIPTION("Core driver for SMSC/Microchip LAN9303 three port ethernet switch"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/lan9303.h b/drivers/net/dsa/lan9303.h index 11f590b64701..c7f73efa50f0 100644 --- a/drivers/net/dsa/lan9303.h +++ b/drivers/net/dsa/lan9303.h @@ -10,3 +10,4 @@ extern const struct lan9303_phy_ops lan9303_indirect_phy_ops; int lan9303_probe(struct lan9303 *chip, struct device_node *np); int lan9303_remove(struct lan9303 *chip); +void lan9303_shutdown(struct lan9303 *chip); diff --git a/drivers/net/dsa/lan9303_i2c.c b/drivers/net/dsa/lan9303_i2c.c index 9bffaef65a04..8ca4713310fa 100644 --- a/drivers/net/dsa/lan9303_i2c.c +++ b/drivers/net/dsa/lan9303_i2c.c @@ -67,13 +67,28 @@ static int lan9303_i2c_probe(struct i2c_client *client, static int lan9303_i2c_remove(struct i2c_client *client) { - struct lan9303_i2c *sw_dev; + struct lan9303_i2c *sw_dev = i2c_get_clientdata(client); - sw_dev = i2c_get_clientdata(client); if (!sw_dev) - return -ENODEV; + return 0; + + lan9303_remove(&sw_dev->chip); + + i2c_set_clientdata(client, NULL); + + return 0; +} + +static void lan9303_i2c_shutdown(struct i2c_client *client) +{ + struct lan9303_i2c *sw_dev = i2c_get_clientdata(client); + + if (!sw_dev) + return; + + lan9303_shutdown(&sw_dev->chip); - return lan9303_remove(&sw_dev->chip); + i2c_set_clientdata(client, NULL); } /*-------------------------------------------------------------------------*/ @@ -97,6 +112,7 @@ static struct i2c_driver lan9303_i2c_driver = { }, .probe = lan9303_i2c_probe, .remove = lan9303_i2c_remove, + .shutdown = lan9303_i2c_shutdown, .id_table = lan9303_i2c_id, }; module_i2c_driver(lan9303_i2c_driver); diff --git a/drivers/net/dsa/lan9303_mdio.c b/drivers/net/dsa/lan9303_mdio.c index 9cbe80460b53..bbb7032409ba 100644 --- a/drivers/net/dsa/lan9303_mdio.c +++ b/drivers/net/dsa/lan9303_mdio.c @@ -138,6 +138,20 @@ static void lan9303_mdio_remove(struct mdio_device *mdiodev) return; lan9303_remove(&sw_dev->chip); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void lan9303_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct lan9303_mdio *sw_dev = dev_get_drvdata(&mdiodev->dev); + + if (!sw_dev) + return; + + lan9303_shutdown(&sw_dev->chip); + + dev_set_drvdata(&mdiodev->dev, NULL); } /*-------------------------------------------------------------------------*/ @@ -155,6 +169,7 @@ static struct mdio_driver lan9303_mdio_driver = { }, .probe = lan9303_mdio_probe, .remove = lan9303_mdio_remove, + .shutdown = lan9303_mdio_shutdown, }; mdio_module_driver(lan9303_mdio_driver); diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index 267324889dd6..3ff4b7e177f3 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -2184,6 +2184,9 @@ static int gswip_remove(struct platform_device *pdev) struct gswip_priv *priv = platform_get_drvdata(pdev); int i; + if (!priv) + return 0; + /* disable the switch */ gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB); @@ -2197,9 +2200,23 @@ static int gswip_remove(struct platform_device *pdev) for (i = 0; i < priv->num_gphy_fw; i++) gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); + platform_set_drvdata(pdev, NULL); + return 0; } +static void gswip_shutdown(struct platform_device *pdev) +{ + struct gswip_priv *priv = platform_get_drvdata(pdev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + platform_set_drvdata(pdev, NULL); +} + static const struct gswip_hw_info gswip_xrx200 = { .max_ports = 7, .cpu_port = 6, @@ -2223,6 +2240,7 @@ MODULE_DEVICE_TABLE(of, gswip_of_match); static struct platform_driver gswip_driver = { .probe = gswip_probe, .remove = gswip_remove, + .shutdown = gswip_shutdown, .driver = { .name = "gswip", .of_match_table = gswip_of_match, diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c index ea7550d1b634..866767b70d65 100644 --- a/drivers/net/dsa/microchip/ksz8795_spi.c +++ b/drivers/net/dsa/microchip/ksz8795_spi.c @@ -94,6 +94,8 @@ static int ksz8795_spi_remove(struct spi_device *spi) if (dev) ksz_switch_remove(dev); + spi_set_drvdata(spi, NULL); + return 0; } @@ -101,8 +103,15 @@ static void ksz8795_spi_shutdown(struct spi_device *spi) { struct ksz_device *dev = spi_get_drvdata(spi); - if (dev && dev->dev_ops->shutdown) + if (!dev) + return; + + if (dev->dev_ops->shutdown) dev->dev_ops->shutdown(dev); + + dsa_switch_shutdown(dev->ds); + + spi_set_drvdata(spi, NULL); } static const struct of_device_id ksz8795_dt_ids[] = { diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c index 4e053a25d077..f3afb8b8c4cc 100644 --- a/drivers/net/dsa/microchip/ksz9477_i2c.c +++ b/drivers/net/dsa/microchip/ksz9477_i2c.c @@ -56,7 +56,10 @@ static int ksz9477_i2c_remove(struct i2c_client *i2c) { struct ksz_device *dev = i2c_get_clientdata(i2c); - ksz_switch_remove(dev); + if (dev) + ksz_switch_remove(dev); + + i2c_set_clientdata(i2c, NULL); return 0; } @@ -65,8 +68,15 @@ static void ksz9477_i2c_shutdown(struct i2c_client *i2c) { struct ksz_device *dev = i2c_get_clientdata(i2c); - if (dev && dev->dev_ops->shutdown) + if (!dev) + return; + + if (dev->dev_ops->shutdown) dev->dev_ops->shutdown(dev); + + dsa_switch_shutdown(dev->ds); + + i2c_set_clientdata(i2c, NULL); } static const struct i2c_device_id ksz9477_i2c_id[] = { diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c index 15bc11b3cda4..e3cb0e6c9f6f 100644 --- a/drivers/net/dsa/microchip/ksz9477_spi.c +++ b/drivers/net/dsa/microchip/ksz9477_spi.c @@ -72,6 +72,8 @@ static int ksz9477_spi_remove(struct spi_device *spi) if (dev) ksz_switch_remove(dev); + spi_set_drvdata(spi, NULL); + return 0; } @@ -79,8 +81,10 @@ static void ksz9477_spi_shutdown(struct spi_device *spi) { struct ksz_device *dev = spi_get_drvdata(spi); - if (dev && dev->dev_ops->shutdown) - dev->dev_ops->shutdown(dev); + if (dev) + dsa_switch_shutdown(dev->ds); + + spi_set_drvdata(spi, NULL); } static const struct of_device_id ksz9477_dt_ids[] = { diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index d0cba2d1cd68..094737e5084a 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -3286,6 +3286,9 @@ mt7530_remove(struct mdio_device *mdiodev) struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); int ret = 0; + if (!priv) + return; + ret = regulator_disable(priv->core_pwr); if (ret < 0) dev_err(priv->dev, @@ -3301,11 +3304,26 @@ mt7530_remove(struct mdio_device *mdiodev) dsa_unregister_switch(priv->ds); mutex_destroy(&priv->reg_mutex); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void mt7530_shutdown(struct mdio_device *mdiodev) +{ + struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static struct mdio_driver mt7530_mdio_driver = { .probe = mt7530_probe, .remove = mt7530_remove, + .shutdown = mt7530_shutdown, .mdiodrv.driver = { .name = "mt7530", .of_match_table = mt7530_of_match, diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c index 24b8219fd607..a4c6eb9a52d0 100644 --- a/drivers/net/dsa/mv88e6060.c +++ b/drivers/net/dsa/mv88e6060.c @@ -290,7 +290,24 @@ static void mv88e6060_remove(struct mdio_device *mdiodev) { struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); + if (!ds) + return; + dsa_unregister_switch(ds); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void mv88e6060_shutdown(struct mdio_device *mdiodev) +{ + struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); + + if (!ds) + return; + + dsa_switch_shutdown(ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id mv88e6060_of_match[] = { @@ -303,6 +320,7 @@ static const struct of_device_id mv88e6060_of_match[] = { static struct mdio_driver mv88e6060_driver = { .probe = mv88e6060_probe, .remove = mv88e6060_remove, + .shutdown = mv88e6060_shutdown, .mdiodrv.driver = { .name = "mv88e6060", .of_match_table = mv88e6060_of_match, diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index c45ca2473743..fb10422d2c33 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -6389,7 +6389,12 @@ out: static void mv88e6xxx_remove(struct mdio_device *mdiodev) { struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); - struct mv88e6xxx_chip *chip = ds->priv; + struct mv88e6xxx_chip *chip; + + if (!ds) + return; + + chip = ds->priv; if (chip->info->ptp_support) { mv88e6xxx_hwtstamp_free(chip); @@ -6410,6 +6415,20 @@ static void mv88e6xxx_remove(struct mdio_device *mdiodev) mv88e6xxx_g1_irq_free(chip); else mv88e6xxx_irq_poll_free(chip); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void mv88e6xxx_shutdown(struct mdio_device *mdiodev) +{ + struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); + + if (!ds) + return; + + dsa_switch_shutdown(ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id mv88e6xxx_of_match[] = { @@ -6433,6 +6452,7 @@ MODULE_DEVICE_TABLE(of, mv88e6xxx_of_match); static struct mdio_driver mv88e6xxx_driver = { .probe = mv88e6xxx_probe, .remove = mv88e6xxx_remove, + .shutdown = mv88e6xxx_shutdown, .mdiodrv.driver = { .name = "mv88e6085", .of_match_table = mv88e6xxx_of_match, diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c index 9e2ac8e46619..11b42fd812e4 100644 --- a/drivers/net/dsa/ocelot/felix_vsc9959.c +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c @@ -1472,9 +1472,10 @@ err_pci_enable: static void felix_pci_remove(struct pci_dev *pdev) { - struct felix *felix; + struct felix *felix = pci_get_drvdata(pdev); - felix = pci_get_drvdata(pdev); + if (!felix) + return; dsa_unregister_switch(felix->ds); @@ -1482,6 +1483,20 @@ static void felix_pci_remove(struct pci_dev *pdev) kfree(felix); pci_disable_device(pdev); + + pci_set_drvdata(pdev, NULL); +} + +static void felix_pci_shutdown(struct pci_dev *pdev) +{ + struct felix *felix = pci_get_drvdata(pdev); + + if (!felix) + return; + + dsa_switch_shutdown(felix->ds); + + pci_set_drvdata(pdev, NULL); } static struct pci_device_id felix_ids[] = { @@ -1498,6 +1513,7 @@ static struct pci_driver felix_vsc9959_pci_driver = { .id_table = felix_ids, .probe = felix_pci_probe, .remove = felix_pci_remove, + .shutdown = felix_pci_shutdown, }; module_pci_driver(felix_vsc9959_pci_driver); diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c index deae923c8b7a..de1d34a1f1e4 100644 --- a/drivers/net/dsa/ocelot/seville_vsc9953.c +++ b/drivers/net/dsa/ocelot/seville_vsc9953.c @@ -1245,18 +1245,33 @@ err_alloc_felix: static int seville_remove(struct platform_device *pdev) { - struct felix *felix; + struct felix *felix = platform_get_drvdata(pdev); - felix = platform_get_drvdata(pdev); + if (!felix) + return 0; dsa_unregister_switch(felix->ds); kfree(felix->ds); kfree(felix); + platform_set_drvdata(pdev, NULL); + return 0; } +static void seville_shutdown(struct platform_device *pdev) +{ + struct felix *felix = platform_get_drvdata(pdev); + + if (!felix) + return; + + dsa_switch_shutdown(felix->ds); + + platform_set_drvdata(pdev, NULL); +} + static const struct of_device_id seville_of_match[] = { { .compatible = "mscc,vsc9953-switch" }, { }, @@ -1266,6 +1281,7 @@ MODULE_DEVICE_TABLE(of, seville_of_match); static struct platform_driver seville_vsc9953_driver = { .probe = seville_probe, .remove = seville_remove, + .shutdown = seville_shutdown, .driver = { .name = "mscc_seville", .of_match_table = of_match_ptr(seville_of_match), diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c index 563d8a279030..a6bfb6abc51a 100644 --- a/drivers/net/dsa/qca/ar9331.c +++ b/drivers/net/dsa/qca/ar9331.c @@ -1083,6 +1083,9 @@ static void ar9331_sw_remove(struct mdio_device *mdiodev) struct ar9331_sw_priv *priv = dev_get_drvdata(&mdiodev->dev); unsigned int i; + if (!priv) + return; + for (i = 0; i < ARRAY_SIZE(priv->port); i++) { struct ar9331_sw_port *port = &priv->port[i]; @@ -1094,6 +1097,20 @@ static void ar9331_sw_remove(struct mdio_device *mdiodev) dsa_unregister_switch(&priv->ds); reset_control_assert(priv->sw_reset); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void ar9331_sw_shutdown(struct mdio_device *mdiodev) +{ + struct ar9331_sw_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_switch_shutdown(&priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id ar9331_sw_of_match[] = { @@ -1104,6 +1121,7 @@ static const struct of_device_id ar9331_sw_of_match[] = { static struct mdio_driver ar9331_sw_mdio_driver = { .probe = ar9331_sw_probe, .remove = ar9331_sw_remove, + .shutdown = ar9331_sw_shutdown, .mdiodrv.driver = { .name = AR9331_SW_NAME, .of_match_table = ar9331_sw_of_match, diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index bda5a9bf4f52..a984f06f6f04 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -1880,10 +1880,27 @@ qca8k_sw_remove(struct mdio_device *mdiodev) struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev); int i; + if (!priv) + return; + for (i = 0; i < QCA8K_NUM_PORTS; i++) qca8k_port_set_status(priv, i, 0); dsa_unregister_switch(priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void qca8k_sw_shutdown(struct mdio_device *mdiodev) +{ + struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } #ifdef CONFIG_PM_SLEEP @@ -1940,6 +1957,7 @@ static const struct of_device_id qca8k_of_match[] = { static struct mdio_driver qca8kmdio_driver = { .probe = qca8k_sw_probe, .remove = qca8k_sw_remove, + .shutdown = qca8k_sw_shutdown, .mdiodrv.driver = { .name = "qca8k", .of_match_table = qca8k_of_match, diff --git a/drivers/net/dsa/realtek-smi-core.c b/drivers/net/dsa/realtek-smi-core.c index 8e49d4f85d48..dd2f0d6208b3 100644 --- a/drivers/net/dsa/realtek-smi-core.c +++ b/drivers/net/dsa/realtek-smi-core.c @@ -464,16 +464,33 @@ static int realtek_smi_probe(struct platform_device *pdev) static int realtek_smi_remove(struct platform_device *pdev) { - struct realtek_smi *smi = dev_get_drvdata(&pdev->dev); + struct realtek_smi *smi = platform_get_drvdata(pdev); + + if (!smi) + return 0; dsa_unregister_switch(smi->ds); if (smi->slave_mii_bus) of_node_put(smi->slave_mii_bus->dev.of_node); gpiod_set_value(smi->reset, 1); + platform_set_drvdata(pdev, NULL); + return 0; } +static void realtek_smi_shutdown(struct platform_device *pdev) +{ + struct realtek_smi *smi = platform_get_drvdata(pdev); + + if (!smi) + return; + + dsa_switch_shutdown(smi->ds); + + platform_set_drvdata(pdev, NULL); +} + static const struct of_device_id realtek_smi_of_match[] = { { .compatible = "realtek,rtl8366rb", @@ -495,6 +512,7 @@ static struct platform_driver realtek_smi_driver = { }, .probe = realtek_smi_probe, .remove = realtek_smi_remove, + .shutdown = realtek_smi_shutdown, }; module_platform_driver(realtek_smi_driver); diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 2f8cc6686c38..7c0db80eff00 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -3335,13 +3335,29 @@ static int sja1105_probe(struct spi_device *spi) static int sja1105_remove(struct spi_device *spi) { struct sja1105_private *priv = spi_get_drvdata(spi); - struct dsa_switch *ds = priv->ds; - dsa_unregister_switch(ds); + if (!priv) + return 0; + + dsa_unregister_switch(priv->ds); + + spi_set_drvdata(spi, NULL); return 0; } +static void sja1105_shutdown(struct spi_device *spi) +{ + struct sja1105_private *priv = spi_get_drvdata(spi); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + spi_set_drvdata(spi, NULL); +} + static const struct of_device_id sja1105_dt_ids[] = { { .compatible = "nxp,sja1105e", .data = &sja1105e_info }, { .compatible = "nxp,sja1105t", .data = &sja1105t_info }, @@ -3365,6 +3381,7 @@ static struct spi_driver sja1105_driver = { }, .probe = sja1105_probe, .remove = sja1105_remove, + .shutdown = sja1105_shutdown, }; module_spi_driver(sja1105_driver); diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c index 19ce4aa0973b..a4b1447ff055 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-core.c +++ b/drivers/net/dsa/vitesse-vsc73xx-core.c @@ -1225,6 +1225,12 @@ int vsc73xx_remove(struct vsc73xx *vsc) } EXPORT_SYMBOL(vsc73xx_remove); +void vsc73xx_shutdown(struct vsc73xx *vsc) +{ + dsa_switch_shutdown(vsc->ds); +} +EXPORT_SYMBOL(vsc73xx_shutdown); + MODULE_AUTHOR("Linus Walleij "); MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/vitesse-vsc73xx-platform.c b/drivers/net/dsa/vitesse-vsc73xx-platform.c index 2a57f337b2a2..fe4b154a0a57 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-platform.c +++ b/drivers/net/dsa/vitesse-vsc73xx-platform.c @@ -116,7 +116,26 @@ static int vsc73xx_platform_remove(struct platform_device *pdev) { struct vsc73xx_platform *vsc_platform = platform_get_drvdata(pdev); - return vsc73xx_remove(&vsc_platform->vsc); + if (!vsc_platform) + return 0; + + vsc73xx_remove(&vsc_platform->vsc); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static void vsc73xx_platform_shutdown(struct platform_device *pdev) +{ + struct vsc73xx_platform *vsc_platform = platform_get_drvdata(pdev); + + if (!vsc_platform) + return; + + vsc73xx_shutdown(&vsc_platform->vsc); + + platform_set_drvdata(pdev, NULL); } static const struct vsc73xx_ops vsc73xx_platform_ops = { @@ -144,6 +163,7 @@ MODULE_DEVICE_TABLE(of, vsc73xx_of_match); static struct platform_driver vsc73xx_platform_driver = { .probe = vsc73xx_platform_probe, .remove = vsc73xx_platform_remove, + .shutdown = vsc73xx_platform_shutdown, .driver = { .name = "vsc73xx-platform", .of_match_table = vsc73xx_of_match, diff --git a/drivers/net/dsa/vitesse-vsc73xx-spi.c b/drivers/net/dsa/vitesse-vsc73xx-spi.c index 81eca4a5781d..645398901e05 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-spi.c +++ b/drivers/net/dsa/vitesse-vsc73xx-spi.c @@ -163,7 +163,26 @@ static int vsc73xx_spi_remove(struct spi_device *spi) { struct vsc73xx_spi *vsc_spi = spi_get_drvdata(spi); - return vsc73xx_remove(&vsc_spi->vsc); + if (!vsc_spi) + return 0; + + vsc73xx_remove(&vsc_spi->vsc); + + spi_set_drvdata(spi, NULL); + + return 0; +} + +static void vsc73xx_spi_shutdown(struct spi_device *spi) +{ + struct vsc73xx_spi *vsc_spi = spi_get_drvdata(spi); + + if (!vsc_spi) + return; + + vsc73xx_shutdown(&vsc_spi->vsc); + + spi_set_drvdata(spi, NULL); } static const struct vsc73xx_ops vsc73xx_spi_ops = { @@ -191,6 +210,7 @@ MODULE_DEVICE_TABLE(of, vsc73xx_of_match); static struct spi_driver vsc73xx_spi_driver = { .probe = vsc73xx_spi_probe, .remove = vsc73xx_spi_remove, + .shutdown = vsc73xx_spi_shutdown, .driver = { .name = "vsc73xx-spi", .of_match_table = vsc73xx_of_match, diff --git a/drivers/net/dsa/vitesse-vsc73xx.h b/drivers/net/dsa/vitesse-vsc73xx.h index 7478f8d4e0a9..30b951504e65 100644 --- a/drivers/net/dsa/vitesse-vsc73xx.h +++ b/drivers/net/dsa/vitesse-vsc73xx.h @@ -27,3 +27,4 @@ struct vsc73xx_ops { int vsc73xx_is_addr_valid(u8 block, u8 subblock); int vsc73xx_probe(struct vsc73xx *vsc); int vsc73xx_remove(struct vsc73xx *vsc); +void vsc73xx_shutdown(struct vsc73xx *vsc); diff --git a/include/net/dsa.h b/include/net/dsa.h index 258867eff230..6e29c0e080f6 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -1046,6 +1046,7 @@ static inline int dsa_ndo_eth_ioctl(struct net_device *dev, struct ifreq *ifr, void dsa_unregister_switch(struct dsa_switch *ds); int dsa_register_switch(struct dsa_switch *ds); +void dsa_switch_shutdown(struct dsa_switch *ds); struct dsa_switch *dsa_switch_find(int tree_index, int sw_index); #ifdef CONFIG_PM_SLEEP int dsa_switch_suspend(struct dsa_switch *ds); diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index eef13cd20f19..fa88e58705f0 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -1562,3 +1562,53 @@ void dsa_unregister_switch(struct dsa_switch *ds) mutex_unlock(&dsa2_mutex); } EXPORT_SYMBOL_GPL(dsa_unregister_switch); + +/* If the DSA master chooses to unregister its net_device on .shutdown, DSA is + * blocking that operation from completion, due to the dev_hold taken inside + * netdev_upper_dev_link. Unlink the DSA slave interfaces from being uppers of + * the DSA master, so that the system can reboot successfully. + */ +void dsa_switch_shutdown(struct dsa_switch *ds) +{ + struct net_device *master, *slave_dev; + LIST_HEAD(unregister_list); + struct dsa_port *dp; + + mutex_lock(&dsa2_mutex); + rtnl_lock(); + + list_for_each_entry(dp, &ds->dst->ports, list) { + if (dp->ds != ds) + continue; + + if (!dsa_port_is_user(dp)) + continue; + + master = dp->cpu_dp->master; + slave_dev = dp->slave; + + netdev_upper_dev_unlink(master, slave_dev); + /* Just unlinking ourselves as uppers of the master is not + * sufficient. When the master net device unregisters, that will + * also call dev_close, which we will catch as NETDEV_GOING_DOWN + * and trigger a dev_close on our own devices (dsa_slave_close). + * In turn, that will call dev_mc_unsync on the master's net + * device. If the master is also a DSA switch port, this will + * trigger dsa_slave_set_rx_mode which will call dev_mc_sync on + * its own master. Lockdep will complain about the fact that + * all cascaded masters have the same dsa_master_addr_list_lock_key, + * which it normally would not do if the cascaded masters would + * be in a proper upper/lower relationship, which we've just + * destroyed. + * To suppress the lockdep warnings, let's actually unregister + * the DSA slave interfaces too, to avoid the nonsensical + * multicast address list synchronization on shutdown. + */ + unregister_netdevice_queue(slave_dev, &unregister_list); + } + unregister_netdevice_many(&unregister_list); + + rtnl_unlock(); + mutex_unlock(&dsa2_mutex); +} +EXPORT_SYMBOL_GPL(dsa_switch_shutdown); -- cgit From 46baae56e1001a771a5d132aa883cb5605013ae2 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 16:34:34 +0300 Subject: net: dsa: hellcreek: be compatible with masters which unregister on shutdown Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the hellcreek driver was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. Hellcreek is a platform device driver, so we probably cannot have the oddities of ->shutdown and ->remove getting both called for the exact same struct device. But to be in line with the pattern from the other device drivers which are on slow buses, implement the same "if this then not that" pattern of either running the ->shutdown or the ->remove hook. The driver's current ->remove implementation makes that very easy because it already zeroes out its device_drvdata on ->remove. Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Acked-by: Kurt Kanzenbach Signed-off-by: David S. Miller --- drivers/net/dsa/hirschmann/hellcreek.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c index 542cfc4ccb08..354655f9ed00 100644 --- a/drivers/net/dsa/hirschmann/hellcreek.c +++ b/drivers/net/dsa/hirschmann/hellcreek.c @@ -1916,6 +1916,9 @@ static int hellcreek_remove(struct platform_device *pdev) { struct hellcreek *hellcreek = platform_get_drvdata(pdev); + if (!hellcreek) + return 0; + hellcreek_hwtstamp_free(hellcreek); hellcreek_ptp_free(hellcreek); dsa_unregister_switch(hellcreek->ds); @@ -1924,6 +1927,18 @@ static int hellcreek_remove(struct platform_device *pdev) return 0; } +static void hellcreek_shutdown(struct platform_device *pdev) +{ + struct hellcreek *hellcreek = platform_get_drvdata(pdev); + + if (!hellcreek) + return; + + dsa_switch_shutdown(hellcreek->ds); + + platform_set_drvdata(pdev, NULL); +} + static const struct hellcreek_platform_data de1soc_r1_pdata = { .name = "r4c30", .num_ports = 4, @@ -1946,6 +1961,7 @@ MODULE_DEVICE_TABLE(of, hellcreek_of_match); static struct platform_driver hellcreek_driver = { .probe = hellcreek_probe, .remove = hellcreek_remove, + .shutdown = hellcreek_shutdown, .driver = { .name = "hellcreek", .of_match_table = hellcreek_of_match, -- cgit From fe4053078cd0f02a3fa140c43660f327702a9f10 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 16:34:35 +0300 Subject: net: dsa: microchip: ksz8863: be compatible with masters which unregister on shutdown Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the Microchip sub-driver for KSZ8863 was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. To fix that, we need to call dsa_switch_shutdown. Since this driver expects the MDIO bus to be backed by mdio_bitbang, I don't think there is currently any MDIO bus driver which implements its ->shutdown by redirecting it to ->remove, but in any case, to be compatible with that pattern, it is necessary to implement an "if this then not that" scheme, to avoid ->remove and ->shutdown from being called both for the same struct device. Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz8863_smi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c index 11293485138c..5883fa7edda2 100644 --- a/drivers/net/dsa/microchip/ksz8863_smi.c +++ b/drivers/net/dsa/microchip/ksz8863_smi.c @@ -191,6 +191,18 @@ static void ksz8863_smi_remove(struct mdio_device *mdiodev) if (dev) ksz_switch_remove(dev); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void ksz8863_smi_shutdown(struct mdio_device *mdiodev) +{ + struct ksz_device *dev = dev_get_drvdata(&mdiodev->dev); + + if (dev) + dsa_switch_shutdown(dev->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id ksz8863_dt_ids[] = { @@ -203,6 +215,7 @@ MODULE_DEVICE_TABLE(of, ksz8863_dt_ids); static struct mdio_driver ksz8863_driver = { .probe = ksz8863_smi_probe, .remove = ksz8863_smi_remove, + .shutdown = ksz8863_smi_shutdown, .mdiodrv.driver = { .name = "ksz8863-switch", .of_match_table = ksz8863_dt_ids, -- cgit From a68e9da48568a0adf5dc817ef81971c0d1aa0672 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 16:34:36 +0300 Subject: net: dsa: xrs700x: be compatible with masters which unregister on shutdown Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the Arrow SpeedChips XRS700x driver was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. To fix that, we need to call dsa_switch_shutdown. These devices can be connected by I2C or by MDIO, and if I search for I2C or MDIO bus drivers that implement their ->shutdown by redirecting it to ->remove I don't see any, however this does not mean it would not be possible. To be compatible with that pattern, it is necessary to implement an "if this then not that" scheme, to avoid ->remove and ->shutdown from being called both for the same struct device. Fixes: ee00b24f32eb ("net: dsa: add Arrow SpeedChips XRS700x driver") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo Signed-off-by: Vladimir Oltean Reviewed-by: George McCollister Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/xrs700x/xrs700x.c | 6 ++++++ drivers/net/dsa/xrs700x/xrs700x.h | 1 + drivers/net/dsa/xrs700x/xrs700x_i2c.c | 18 ++++++++++++++++++ drivers/net/dsa/xrs700x/xrs700x_mdio.c | 18 ++++++++++++++++++ 4 files changed, 43 insertions(+) diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c index 130abb0f1438..469420941054 100644 --- a/drivers/net/dsa/xrs700x/xrs700x.c +++ b/drivers/net/dsa/xrs700x/xrs700x.c @@ -822,6 +822,12 @@ void xrs700x_switch_remove(struct xrs700x *priv) } EXPORT_SYMBOL(xrs700x_switch_remove); +void xrs700x_switch_shutdown(struct xrs700x *priv) +{ + dsa_switch_shutdown(priv->ds); +} +EXPORT_SYMBOL(xrs700x_switch_shutdown); + MODULE_AUTHOR("George McCollister "); MODULE_DESCRIPTION("Arrow SpeedChips XRS700x DSA driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/xrs700x/xrs700x.h b/drivers/net/dsa/xrs700x/xrs700x.h index ff62cf61b091..4d58257471d2 100644 --- a/drivers/net/dsa/xrs700x/xrs700x.h +++ b/drivers/net/dsa/xrs700x/xrs700x.h @@ -40,3 +40,4 @@ struct xrs700x { struct xrs700x *xrs700x_switch_alloc(struct device *base, void *devpriv); int xrs700x_switch_register(struct xrs700x *priv); void xrs700x_switch_remove(struct xrs700x *priv); +void xrs700x_switch_shutdown(struct xrs700x *priv); diff --git a/drivers/net/dsa/xrs700x/xrs700x_i2c.c b/drivers/net/dsa/xrs700x/xrs700x_i2c.c index 489d9385b4f0..6deae388a0d6 100644 --- a/drivers/net/dsa/xrs700x/xrs700x_i2c.c +++ b/drivers/net/dsa/xrs700x/xrs700x_i2c.c @@ -109,11 +109,28 @@ static int xrs700x_i2c_remove(struct i2c_client *i2c) { struct xrs700x *priv = i2c_get_clientdata(i2c); + if (!priv) + return 0; + xrs700x_switch_remove(priv); + i2c_set_clientdata(i2c, NULL); + return 0; } +static void xrs700x_i2c_shutdown(struct i2c_client *i2c) +{ + struct xrs700x *priv = i2c_get_clientdata(i2c); + + if (!priv) + return; + + xrs700x_switch_shutdown(priv); + + i2c_set_clientdata(i2c, NULL); +} + static const struct i2c_device_id xrs700x_i2c_id[] = { { "xrs700x-switch", 0 }, {}, @@ -137,6 +154,7 @@ static struct i2c_driver xrs700x_i2c_driver = { }, .probe = xrs700x_i2c_probe, .remove = xrs700x_i2c_remove, + .shutdown = xrs700x_i2c_shutdown, .id_table = xrs700x_i2c_id, }; diff --git a/drivers/net/dsa/xrs700x/xrs700x_mdio.c b/drivers/net/dsa/xrs700x/xrs700x_mdio.c index 44f58bee04a4..d01cf1073d49 100644 --- a/drivers/net/dsa/xrs700x/xrs700x_mdio.c +++ b/drivers/net/dsa/xrs700x/xrs700x_mdio.c @@ -136,7 +136,24 @@ static void xrs700x_mdio_remove(struct mdio_device *mdiodev) { struct xrs700x *priv = dev_get_drvdata(&mdiodev->dev); + if (!priv) + return; + xrs700x_switch_remove(priv); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static void xrs700x_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct xrs700x *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + xrs700x_switch_shutdown(priv); + + dev_set_drvdata(&mdiodev->dev, NULL); } static const struct of_device_id __maybe_unused xrs700x_mdio_dt_ids[] = { @@ -155,6 +172,7 @@ static struct mdio_driver xrs700x_mdio_driver = { }, .probe = xrs700x_mdio_probe, .remove = xrs700x_mdio_remove, + .shutdown = xrs700x_mdio_shutdown, }; mdio_module_driver(xrs700x_mdio_driver); -- cgit From 3ede7f84c7c21f93c5eac611d60eba3f2c765e0f Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 08:27:10 +0200 Subject: xen-netback: correct success/error reporting for the SKB-with-fraglist case When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the special considerations for the head of the SKB no longer apply. Don't mistakenly report ERROR to the frontend for the first entry in the list, even if - from all I can tell - this shouldn't matter much as the overall transmit will need to be considered failed anyway. Signed-off-by: Jan Beulich Reviewed-by: Paul Durrant Signed-off-by: David S. Miller --- drivers/net/xen-netback/netback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 39a01c2a3058..32d5bc4919d8 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -499,7 +499,7 @@ check_frags: * the header's copy failed, and they are * sharing a slot, send an error */ - if (i == 0 && sharedslot) + if (i == 0 && !first_shinfo && sharedslot) xenvif_idx_release(queue, pending_idx, XEN_NETIF_RSP_ERROR); else -- cgit From afd92d82c9d715fb97565408755acad81573591a Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Fri, 17 Sep 2021 16:34:06 +0800 Subject: virtio-net: fix pages leaking when building skb in big mode We try to use build_skb() if we had sufficient tailroom. But we forget to release the unused pages chained via private in big mode which will leak pages. Fixing this by release the pages after building the skb in big mode. Cc: Xuan Zhuo Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by: Jason Wang Reviewed-by: Xuan Zhuo Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 271d38c1d9f8..79bd2585ec6b 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -423,6 +423,10 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi, skb_reserve(skb, p - buf); skb_put(skb, len); + + page = (struct page *)page->private; + if (page) + give_pages(rq, page); goto ok; } -- cgit From 7237a494decfa17d0b9d0076e6cee3235719de90 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Fri, 17 Sep 2021 13:22:05 +0300 Subject: enetc: Fix illegal access when reading affinity_hint irq_set_affinity_hit() stores a reference to the cpumask_t parameter in the irq descriptor, and that reference can be accessed later from irq_affinity_hint_proc_show(). Since the cpu_mask parameter passed to irq_set_affinity_hit() has only temporary storage (it's on the stack memory), later accesses to it are illegal. Thus reads from the corresponding procfs affinity_hint file can result in paging request oops. The issue is fixed by the get_cpu_mask() helper, which provides a permanent storage for the cpumask_t parameter. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/enetc.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index 3ca93adb9662..7f90c27c0e79 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -1879,7 +1879,6 @@ static void enetc_clear_bdrs(struct enetc_ndev_priv *priv) static int enetc_setup_irqs(struct enetc_ndev_priv *priv) { struct pci_dev *pdev = priv->si->pdev; - cpumask_t cpu_mask; int i, j, err; for (i = 0; i < priv->bdr_int_num; i++) { @@ -1908,9 +1907,7 @@ static int enetc_setup_irqs(struct enetc_ndev_priv *priv) enetc_wr(hw, ENETC_SIMSITRV(idx), entry); } - cpumask_clear(&cpu_mask); - cpumask_set_cpu(i % num_online_cpus(), &cpu_mask); - irq_set_affinity_hint(irq, &cpu_mask); + irq_set_affinity_hint(irq, get_cpu_mask(i % num_online_cpus())); } return 0; -- cgit From 9f7afa05c9522b086327929ae622facab0f0f72b Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Fri, 17 Sep 2021 13:22:06 +0300 Subject: enetc: Fix uninitialized struct dim_sample field usage The only struct dim_sample member that does not get initialized by dim_update_sample() is comp_ctr. (There is special API to initialize comp_ctr: dim_update_sample_with_comps(), and it is currently used only for RDMA.) comp_ctr is used to compute curr_stats->cmps and curr_stats->cpe_ratio (see dim_calc_stats()) which in turn are consumed by the rdma_dim_*() API. Therefore, functionally, the net_dim*() API consumers are not affected. Nevertheless, fix the computation of statistics based on an uninitialized variable, even if the mentioned statistics are not used at the moment. Fixes: ae0e6a5d1627 ("enetc: Add adaptive interrupt coalescing") Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/enetc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index 7f90c27c0e79..042327b9981f 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -419,7 +419,7 @@ static void enetc_rx_dim_work(struct work_struct *w) static void enetc_rx_net_dim(struct enetc_int_vector *v) { - struct dim_sample dim_sample; + struct dim_sample dim_sample = {}; v->comp_cnt++; -- cgit From 87758511075ec961486fe78d7548dd709b524433 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 17 Sep 2021 14:05:47 -0700 Subject: igc: fix build errors for PTP When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is not available to the igc driver. Make this driver depend on PTP_1588_CLOCK_OPTIONAL so that it will build without errors. Various igc commits have used ptp_*() functions without checking that PTP_1588_CLOCK is enabled. Fix all of these here. Fixes these build errors: ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other': igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event' ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event' ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event' ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info': igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225': igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin' ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init': igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop': igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister' ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe': Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS") Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command") Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225") Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP") Signed-off-by: Randy Dunlap Cc: Ederson de Souza Cc: Tony Nguyen Cc: Vinicius Costa Gomes Cc: Jeff Kirsher Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Jesse Brandeburg Cc: intel-wired-lan@lists.osuosl.org Acked-by: Vinicius Costa Gomes Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index b0b6f90deb7d..ed8ea63bb172 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -335,6 +335,7 @@ config IGC tristate "Intel(R) Ethernet Controller I225-LM/I225-V support" default n depends on PCI + depends on PTP_1588_CLOCK_OPTIONAL help This driver supports Intel(R) Ethernet Controller I225-LM/I225-V family of adapters. -- cgit From 48e6d083b3aa006052db687fb26eeceef1d325b6 Mon Sep 17 00:00:00 2001 From: Alejandro Concepcion-Rodriguez Date: Fri, 17 Sep 2021 18:49:59 +0000 Subject: docs: net: dsa: sja1105: fix reference to sja1105.txt The file sja1105.txt was converted to nxp,sja1105.yaml. Signed-off-by: Alejandro Concepcion-Rodriguez Signed-off-by: David S. Miller --- Documentation/networking/dsa/sja1105.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/dsa/sja1105.rst b/Documentation/networking/dsa/sja1105.rst index 564caeebe2b2..29b1bae0cf00 100644 --- a/Documentation/networking/dsa/sja1105.rst +++ b/Documentation/networking/dsa/sja1105.rst @@ -296,7 +296,7 @@ not available. Device Tree bindings and board design ===================================== -This section references ``Documentation/devicetree/bindings/net/dsa/sja1105.txt`` +This section references ``Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml`` and aims to showcase some potential switch caveats. RMII PHY role and out-of-band signaling -- cgit From 2dcb96bacce36021c2f3eaae0cef607b5bb71ede Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 18 Sep 2021 14:42:35 +0200 Subject: net: core: Correct the sock::sk_lock.owned lockdep annotations lock_sock_fast() and lock_sock_nested() contain lockdep annotations for the sock::sk_lock.owned 'mutex'. sock::sk_lock.owned is not a regular mutex. It is just lockdep wise equivalent. In fact it's an open coded trivial mutex implementation with some interesting features. sock::sk_lock.slock is a regular spinlock protecting the 'mutex' representation sock::sk_lock.owned which is a plain boolean. If 'owned' is true, then some other task holds the 'mutex', otherwise it is uncontended. As this locking construct is obviously endangered by lock ordering issues as any other locking primitive it got lockdep annotated via a dedicated dependency map sock::sk_lock.dep_map which has to be updated at the lock and unlock sites. lock_sock_nested() is a straight forward 'mutex' lock operation: might_sleep(); spin_lock_bh(sock::sk_lock.slock) while (!try_lock(sock::sk_lock.owned)) { spin_unlock_bh(sock::sk_lock.slock); wait_for_release(); spin_lock_bh(sock::sk_lock.slock); } The lockdep annotation for sock::sk_lock.owned is for unknown reasons _after_ the lock has been acquired, i.e. after the code block above and after releasing sock::sk_lock.slock, but inside the bottom halves disabled region: spin_unlock(sock::sk_lock.slock); mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_); local_bh_enable(); The placement after the unlock is obvious because otherwise the mutex_acquire() would nest into the spin lock held region. But that's from the lockdep perspective still the wrong place: 1) The mutex_acquire() is issued _after_ the successful acquisition which is pointless because in a dead lock scenario this point is never reached which means that if the deadlock is the first instance of exposing the wrong lock order lockdep does not have a chance to detect it. 2) It only works because lockdep is rather lax on the context from which the mutex_acquire() is issued. Acquiring a mutex inside a bottom halves and therefore non-preemptible region is obviously invalid, except for a trylock which is clearly not the case here. This 'works' stops working on RT enabled kernels where the bottom halves serialization is done via a local lock, which exposes this misplacement because the 'mutex' and the local lock nest the wrong way around and lockdep complains rightfully about a lock inversion. The placement is wrong since the initial commit a5b5bb9a053a ("[PATCH] lockdep: annotate sk_locks") which introduced this. Fix it by moving the mutex_acquire() in front of the actual lock acquisition, which is what the regular mutex_lock() operation does as well. lock_sock_fast() is not that straight forward. It looks at the first glance like a convoluted trylock operation: spin_lock_bh(sock::sk_lock.slock) if (!sock::sk_lock.owned) return false; while (!try_lock(sock::sk_lock.owned)) { spin_unlock_bh(sock::sk_lock.slock); wait_for_release(); spin_lock_bh(sock::sk_lock.slock); } spin_unlock(sock::sk_lock.slock); mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_); local_bh_enable(); return true; But that's not the case: lock_sock_fast() is an interesting optimization for short critical sections which can run with bottom halves disabled and sock::sk_lock.slock held. This allows to shortcut the 'mutex' operation in the non contended case by preventing other lockers to acquire sock::sk_lock.owned because they are blocked on sock::sk_lock.slock, which in turn avoids the overhead of doing the heavy processing in release_sock() including waking up wait queue waiters. In the contended case, i.e. when sock::sk_lock.owned == true the behavior is the same as lock_sock_nested(). Semantically this shortcut means, that the task acquired the 'mutex' even if it does not touch the sock::sk_lock.owned field in the non-contended case. Not telling lockdep about this shortcut acquisition is hiding potential lock ordering violations in the fast path. As a consequence the same reasoning as for the above lock_sock_nested() case vs. the placement of the lockdep annotation applies. The current placement of the lockdep annotation was just copied from the original lock_sock(), now renamed to lock_sock_nested(), implementation. Fix this by moving the mutex_acquire() in front of the actual lock acquisition and adding the corresponding mutex_release() into unlock_sock_fast(). Also document the fast path return case with a comment. Reported-by: Sebastian Siewior Signed-off-by: Thomas Gleixner Cc: netdev@vger.kernel.org Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Eric Dumazet Signed-off-by: David S. Miller --- include/net/sock.h | 1 + net/core/sock.c | 37 +++++++++++++++++++++++-------------- 2 files changed, 24 insertions(+), 14 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index 66a9a90f9558..c005c3c750e8 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1640,6 +1640,7 @@ static inline void unlock_sock_fast(struct sock *sk, bool slow) release_sock(sk); __release(&sk->sk_lock.slock); } else { + mutex_release(&sk->sk_lock.dep_map, _RET_IP_); spin_unlock_bh(&sk->sk_lock.slock); } } diff --git a/net/core/sock.c b/net/core/sock.c index 62627e868e03..512e629f9780 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -3179,17 +3179,15 @@ EXPORT_SYMBOL(sock_init_data); void lock_sock_nested(struct sock *sk, int subclass) { + /* The sk_lock has mutex_lock() semantics here. */ + mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_); + might_sleep(); spin_lock_bh(&sk->sk_lock.slock); if (sk->sk_lock.owned) __lock_sock(sk); sk->sk_lock.owned = 1; - spin_unlock(&sk->sk_lock.slock); - /* - * The sk_lock has mutex_lock() semantics here: - */ - mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_); - local_bh_enable(); + spin_unlock_bh(&sk->sk_lock.slock); } EXPORT_SYMBOL(lock_sock_nested); @@ -3227,24 +3225,35 @@ EXPORT_SYMBOL(release_sock); */ bool lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock) { + /* The sk_lock has mutex_lock() semantics here. */ + mutex_acquire(&sk->sk_lock.dep_map, 0, 0, _RET_IP_); + might_sleep(); spin_lock_bh(&sk->sk_lock.slock); - if (!sk->sk_lock.owned) + if (!sk->sk_lock.owned) { /* - * Note : We must disable BH + * Fast path return with bottom halves disabled and + * sock::sk_lock.slock held. + * + * The 'mutex' is not contended and holding + * sock::sk_lock.slock prevents all other lockers to + * proceed so the corresponding unlock_sock_fast() can + * avoid the slow path of release_sock() completely and + * just release slock. + * + * From a semantical POV this is equivalent to 'acquiring' + * the 'mutex', hence the corresponding lockdep + * mutex_release() has to happen in the fast path of + * unlock_sock_fast(). */ return false; + } __lock_sock(sk); sk->sk_lock.owned = 1; - spin_unlock(&sk->sk_lock.slock); - /* - * The sk_lock has mutex_lock() semantics here: - */ - mutex_acquire(&sk->sk_lock.dep_map, 0, 0, _RET_IP_); __acquire(&sk->sk_lock.slock); - local_bh_enable(); + spin_unlock_bh(&sk->sk_lock.slock); return true; } EXPORT_SYMBOL(lock_sock_fast); -- cgit From 163957c43d96c2409d9d9d2e94823f7300f6e52c Mon Sep 17 00:00:00 2001 From: Colin Foster Date: Fri, 17 Sep 2021 08:39:04 -0700 Subject: net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFG A useless write to ANA_PFC_PFC_CFG was left in while refactoring ocelot to phylink. Since priority flow control is disabled, writing the speed has no effect. Further, it was using ethtool.h SPEED_ instead of OCELOT_SPEED_ macros, which are incorrectly offset for GENMASK. Lastly, for priority flow control to properly function, some scenarios would rely on the rate adaptation from the PCS while the MAC speed would be fixed. So it isn't used, and even if it was, neither "speed" nor "mac_speed" are necessarily the correct values to be used. Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink") Signed-off-by: Colin Foster Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index c581b955efb3..08be0440af28 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -569,10 +569,6 @@ void ocelot_phylink_mac_link_up(struct ocelot *ocelot, int port, ocelot_port_writel(ocelot_port, DEV_CLOCK_CFG_LINK_SPEED(speed), DEV_CLOCK_CFG); - /* No PFC */ - ocelot_write_gix(ocelot, ANA_PFC_PFC_CFG_FC_LINK_SPEED(speed), - ANA_PFC_PFC_CFG, port); - /* Core: Enable port for frame transfer */ ocelot_fields_write(ocelot, port, QSYS_SWITCH_PORT_MODE_PORT_ENA, 1); -- cgit From ba68e9941984792f7e8a7be90b8245eb0d2b4d7b Mon Sep 17 00:00:00 2001 From: Colin Foster Date: Fri, 17 Sep 2021 08:39:05 -0700 Subject: net: mscc: ocelot: remove buggy duplicate write to DEV_CLOCK_CFG When updating ocelot to use phylink, a second write to DEV_CLOCK_CFG was mistakenly left in. It used the variable "speed" which, previously, would would have been assigned a value of OCELOT_SPEED_1000. In phylink the variable is be SPEED_1000, which is invalid for the DEV_CLOCK_LINK_SPEED macro. Removing it as unnecessary and buggy. Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink") Signed-off-by: Colin Foster Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 08be0440af28..729ba826ba17 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -563,12 +563,6 @@ void ocelot_phylink_mac_link_up(struct ocelot *ocelot, int port, ocelot_port_writel(ocelot_port, DEV_MAC_ENA_CFG_RX_ENA | DEV_MAC_ENA_CFG_TX_ENA, DEV_MAC_ENA_CFG); - /* Take MAC, Port, Phy (intern) and PCS (SGMII/Serdes) clock out of - * reset - */ - ocelot_port_writel(ocelot_port, DEV_CLOCK_CFG_LINK_SPEED(speed), - DEV_CLOCK_CFG); - /* Core: Enable port for frame transfer */ ocelot_fields_write(ocelot, port, QSYS_SWITCH_PORT_MODE_PORT_ENA, 1); -- cgit From fdb475838539cb516caeeeaed06b4b5bc62c9179 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 17 Sep 2021 11:20:58 +0200 Subject: net: freescale: drop unneeded MODULE_ALIAS The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 80bd5c629fa0..ec87b370bba1 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -4176,5 +4176,4 @@ static struct platform_driver fec_driver = { module_platform_driver(fec_driver); -MODULE_ALIAS("platform:"DRIVER_NAME); MODULE_LICENSE("GPL"); -- cgit From fd292c189a979838622d5e03e15fa688c81dd50b Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 17 Sep 2021 17:29:16 +0300 Subject: net: dsa: tear down devlink port regions when tearing down the devlink port on error Commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal") decided it was fine to ignore errors on certain ports that fail to probe, and go on with the ports that do probe fine. Commit fb6ec87f7229 ("net: dsa: Fix type was not set for devlink port") noticed that devlink_port_type_eth_set(dlp, dp->slave); does not get called, and devlink notices after a timeout of 3600 seconds and prints a WARN_ON. So it went ahead to unregister the devlink port. And because there exists an UNUSED port flavour, we actually re-register the devlink port as UNUSED. Commit 08156ba430b4 ("net: dsa: Add devlink port regions support to DSA") added devlink port regions, which are set up by the driver and not by DSA. When we trigger the devlink port deregistration and reregistration as unused, devlink now prints another WARN_ON, from here: devlink_port_unregister: WARN_ON(!list_empty(&devlink_port->region_list)); So the port still has regions, which makes sense, because they were set up by the driver, and the driver doesn't know we're unregistering the devlink port. Somebody needs to tear them down, and optionally (actually it would be nice, to be consistent) set them up again for the new devlink port. But DSA's layering stays in our way quite badly here. The options I've considered are: 1. Introduce a function in devlink to just change a port's type and flavour. No dice, devlink keeps a lot of state, it really wants the port to not be registered when you set its parameters, so changing anything can only be done by destroying what we currently have and recreating it. 2. Make DSA cache the parameters passed to dsa_devlink_port_region_create, and the region returned, keep those in a list, then when the devlink port unregister needs to take place, the existing devlink regions are destroyed by DSA, and we replay the creation of new regions using the cached parameters. Problem: mv88e6xxx keeps the region pointers in chip->ports[port].region, and these will remain stale after DSA frees them. There are many things DSA can do, but updating mv88e6xxx's private pointers is not one of them. 3. Just let the driver do it (i.e. introduce a very specific method called ds->ops->port_reinit_as_unused, which unregisters its devlink port devlink regions, then the old devlink port, then registers the new one, then the devlink port regions for it). While it does work, as opposed to the others, it's pretty horrible from an API perspective and we can do better. 4. Introduce a new pair of methods, ->port_setup and ->port_teardown, which in the case of mv88e6xxx must register and unregister the devlink port regions. Call these 2 methods when the port must be reinitialized as unused. Naturally, I went for the 4th approach. Fixes: 08156ba430b4 ("net: dsa: Add devlink port regions support to DSA") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 16 +++++++- drivers/net/dsa/mv88e6xxx/devlink.c | 73 +++++-------------------------------- drivers/net/dsa/mv88e6xxx/devlink.h | 6 ++- include/net/dsa.h | 8 ++++ net/dsa/dsa2.c | 51 +++++++++++++++++++++++--- 5 files changed, 81 insertions(+), 73 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index fb10422d2c33..8ab0be793811 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3071,7 +3071,7 @@ static void mv88e6xxx_teardown(struct dsa_switch *ds) { mv88e6xxx_teardown_devlink_params(ds); dsa_devlink_resources_unregister(ds); - mv88e6xxx_teardown_devlink_regions(ds); + mv88e6xxx_teardown_devlink_regions_global(ds); } static int mv88e6xxx_setup(struct dsa_switch *ds) @@ -3215,7 +3215,7 @@ unlock: if (err) goto out_resources; - err = mv88e6xxx_setup_devlink_regions(ds); + err = mv88e6xxx_setup_devlink_regions_global(ds); if (err) goto out_params; @@ -3229,6 +3229,16 @@ out_resources: return err; } +static int mv88e6xxx_port_setup(struct dsa_switch *ds, int port) +{ + return mv88e6xxx_setup_devlink_regions_port(ds, port); +} + +static void mv88e6xxx_port_teardown(struct dsa_switch *ds, int port) +{ + mv88e6xxx_teardown_devlink_regions_port(ds, port); +} + /* prod_id for switch families which do not have a PHY model number */ static const u16 family_prod_id_table[] = { [MV88E6XXX_FAMILY_6341] = MV88E6XXX_PORT_SWITCH_ID_PROD_6341, @@ -6116,6 +6126,8 @@ static const struct dsa_switch_ops mv88e6xxx_switch_ops = { .change_tag_protocol = mv88e6xxx_change_tag_protocol, .setup = mv88e6xxx_setup, .teardown = mv88e6xxx_teardown, + .port_setup = mv88e6xxx_port_setup, + .port_teardown = mv88e6xxx_port_teardown, .phylink_validate = mv88e6xxx_validate, .phylink_mac_link_state = mv88e6xxx_serdes_pcs_get_state, .phylink_mac_config = mv88e6xxx_mac_config, diff --git a/drivers/net/dsa/mv88e6xxx/devlink.c b/drivers/net/dsa/mv88e6xxx/devlink.c index 0c0f5ea6680c..381068395c63 100644 --- a/drivers/net/dsa/mv88e6xxx/devlink.c +++ b/drivers/net/dsa/mv88e6xxx/devlink.c @@ -647,26 +647,25 @@ static struct mv88e6xxx_region mv88e6xxx_regions[] = { }, }; -static void -mv88e6xxx_teardown_devlink_regions_global(struct mv88e6xxx_chip *chip) +void mv88e6xxx_teardown_devlink_regions_global(struct dsa_switch *ds) { + struct mv88e6xxx_chip *chip = ds->priv; int i; for (i = 0; i < ARRAY_SIZE(mv88e6xxx_regions); i++) dsa_devlink_region_destroy(chip->regions[i]); } -static void -mv88e6xxx_teardown_devlink_regions_port(struct mv88e6xxx_chip *chip, - int port) +void mv88e6xxx_teardown_devlink_regions_port(struct dsa_switch *ds, int port) { + struct mv88e6xxx_chip *chip = ds->priv; + dsa_devlink_region_destroy(chip->ports[port].region); } -static int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds, - struct mv88e6xxx_chip *chip, - int port) +int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds, int port) { + struct mv88e6xxx_chip *chip = ds->priv; struct devlink_region *region; region = dsa_devlink_port_region_create(ds, @@ -681,40 +680,10 @@ static int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds, return 0; } -static void -mv88e6xxx_teardown_devlink_regions_ports(struct mv88e6xxx_chip *chip) -{ - int port; - - for (port = 0; port < mv88e6xxx_num_ports(chip); port++) - mv88e6xxx_teardown_devlink_regions_port(chip, port); -} - -static int mv88e6xxx_setup_devlink_regions_ports(struct dsa_switch *ds, - struct mv88e6xxx_chip *chip) -{ - int port; - int err; - - for (port = 0; port < mv88e6xxx_num_ports(chip); port++) { - err = mv88e6xxx_setup_devlink_regions_port(ds, chip, port); - if (err) - goto out; - } - - return 0; - -out: - while (port-- > 0) - mv88e6xxx_teardown_devlink_regions_port(chip, port); - - return err; -} - -static int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds, - struct mv88e6xxx_chip *chip) +int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds) { bool (*cond)(struct mv88e6xxx_chip *chip); + struct mv88e6xxx_chip *chip = ds->priv; struct devlink_region_ops *ops; struct devlink_region *region; u64 size; @@ -753,30 +722,6 @@ out: return PTR_ERR(region); } -int mv88e6xxx_setup_devlink_regions(struct dsa_switch *ds) -{ - struct mv88e6xxx_chip *chip = ds->priv; - int err; - - err = mv88e6xxx_setup_devlink_regions_global(ds, chip); - if (err) - return err; - - err = mv88e6xxx_setup_devlink_regions_ports(ds, chip); - if (err) - mv88e6xxx_teardown_devlink_regions_global(chip); - - return err; -} - -void mv88e6xxx_teardown_devlink_regions(struct dsa_switch *ds) -{ - struct mv88e6xxx_chip *chip = ds->priv; - - mv88e6xxx_teardown_devlink_regions_ports(chip); - mv88e6xxx_teardown_devlink_regions_global(chip); -} - int mv88e6xxx_devlink_info_get(struct dsa_switch *ds, struct devlink_info_req *req, struct netlink_ext_ack *extack) diff --git a/drivers/net/dsa/mv88e6xxx/devlink.h b/drivers/net/dsa/mv88e6xxx/devlink.h index 3d72db3dcf95..65ce6a6858b9 100644 --- a/drivers/net/dsa/mv88e6xxx/devlink.h +++ b/drivers/net/dsa/mv88e6xxx/devlink.h @@ -12,8 +12,10 @@ int mv88e6xxx_devlink_param_get(struct dsa_switch *ds, u32 id, struct devlink_param_gset_ctx *ctx); int mv88e6xxx_devlink_param_set(struct dsa_switch *ds, u32 id, struct devlink_param_gset_ctx *ctx); -int mv88e6xxx_setup_devlink_regions(struct dsa_switch *ds); -void mv88e6xxx_teardown_devlink_regions(struct dsa_switch *ds); +int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds); +void mv88e6xxx_teardown_devlink_regions_global(struct dsa_switch *ds); +int mv88e6xxx_setup_devlink_regions_port(struct dsa_switch *ds, int port); +void mv88e6xxx_teardown_devlink_regions_port(struct dsa_switch *ds, int port); int mv88e6xxx_devlink_info_get(struct dsa_switch *ds, struct devlink_info_req *req, diff --git a/include/net/dsa.h b/include/net/dsa.h index 6e29c0e080f6..d784e76113b8 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -585,8 +585,16 @@ struct dsa_switch_ops { int (*change_tag_protocol)(struct dsa_switch *ds, int port, enum dsa_tag_protocol proto); + /* Optional switch-wide initialization and destruction methods */ int (*setup)(struct dsa_switch *ds); void (*teardown)(struct dsa_switch *ds); + + /* Per-port initialization and destruction methods. Mandatory if the + * driver registers devlink port regions, optional otherwise. + */ + int (*port_setup)(struct dsa_switch *ds, int port); + void (*port_teardown)(struct dsa_switch *ds, int port); + u32 (*get_phy_flags)(struct dsa_switch *ds, int port); /* diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index fa88e58705f0..f14897d9b31d 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -429,6 +429,7 @@ static int dsa_port_setup(struct dsa_port *dp) { struct devlink_port *dlp = &dp->devlink_port; bool dsa_port_link_registered = false; + struct dsa_switch *ds = dp->ds; bool dsa_port_enabled = false; int err = 0; @@ -438,6 +439,12 @@ static int dsa_port_setup(struct dsa_port *dp) INIT_LIST_HEAD(&dp->fdbs); INIT_LIST_HEAD(&dp->mdbs); + if (ds->ops->port_setup) { + err = ds->ops->port_setup(ds, dp->index); + if (err) + return err; + } + switch (dp->type) { case DSA_PORT_TYPE_UNUSED: dsa_port_disable(dp); @@ -480,8 +487,11 @@ static int dsa_port_setup(struct dsa_port *dp) dsa_port_disable(dp); if (err && dsa_port_link_registered) dsa_port_link_unregister_of(dp); - if (err) + if (err) { + if (ds->ops->port_teardown) + ds->ops->port_teardown(ds, dp->index); return err; + } dp->setup = true; @@ -533,11 +543,15 @@ static int dsa_port_devlink_setup(struct dsa_port *dp) static void dsa_port_teardown(struct dsa_port *dp) { struct devlink_port *dlp = &dp->devlink_port; + struct dsa_switch *ds = dp->ds; struct dsa_mac_addr *a, *tmp; if (!dp->setup) return; + if (ds->ops->port_teardown) + ds->ops->port_teardown(ds, dp->index); + devlink_port_type_clear(dlp); switch (dp->type) { @@ -581,6 +595,36 @@ static void dsa_port_devlink_teardown(struct dsa_port *dp) dp->devlink_port_setup = false; } +/* Destroy the current devlink port, and create a new one which has the UNUSED + * flavour. At this point, any call to ds->ops->port_setup has been already + * balanced out by a call to ds->ops->port_teardown, so we know that any + * devlink port regions the driver had are now unregistered. We then call its + * ds->ops->port_setup again, in order for the driver to re-create them on the + * new devlink port. + */ +static int dsa_port_reinit_as_unused(struct dsa_port *dp) +{ + struct dsa_switch *ds = dp->ds; + int err; + + dsa_port_devlink_teardown(dp); + dp->type = DSA_PORT_TYPE_UNUSED; + err = dsa_port_devlink_setup(dp); + if (err) + return err; + + if (ds->ops->port_setup) { + /* On error, leave the devlink port registered, + * dsa_switch_teardown will clean it up later. + */ + err = ds->ops->port_setup(ds, dp->index); + if (err) + return err; + } + + return 0; +} + static int dsa_devlink_info_get(struct devlink *dl, struct devlink_info_req *req, struct netlink_ext_ack *extack) @@ -938,12 +982,9 @@ static int dsa_tree_setup_switches(struct dsa_switch_tree *dst) list_for_each_entry(dp, &dst->ports, list) { err = dsa_port_setup(dp); if (err) { - dsa_port_devlink_teardown(dp); - dp->type = DSA_PORT_TYPE_UNUSED; - err = dsa_port_devlink_setup(dp); + err = dsa_port_reinit_as_unused(dp); if (err) goto teardown; - continue; } } -- cgit From 029497e66bdc762e001880e4c85a91f35a54b1e2 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 19 Sep 2021 13:57:25 +0200 Subject: net: bgmac-bcma: handle deferred probe error due to mac-address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to the inclusion of nvmem handling into the mac-address getter function of_get_mac_address() by commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") it is now possible to get a -EPROBE_DEFER return code. Which did cause bgmac to assign a random ethernet address. This exact issue happened on my Meraki MR32. The nvmem provider is an EEPROM (at24c64) which gets instantiated once the module driver is loaded... This happens once the filesystem becomes available. With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error. Then the driver subsystem will reschedule the probe at a later time. Cc: Petr Štetiar Cc: Michael Walle Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Christian Lamparter Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac-bcma.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bgmac-bcma.c b/drivers/net/ethernet/broadcom/bgmac-bcma.c index 85fa0ab7201c..9513cfb5ba58 100644 --- a/drivers/net/ethernet/broadcom/bgmac-bcma.c +++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c @@ -129,6 +129,8 @@ static int bgmac_probe(struct bcma_device *core) bcma_set_drvdata(core, bgmac); err = of_get_mac_address(bgmac->dev->of_node, bgmac->net_dev->dev_addr); + if (err == -EPROBE_DEFER) + return err; /* If no MAC address assigned via device tree, check SPROM */ if (err) { -- cgit From 48514a22333099b93c33ea1c7c97dad3f7a611ce Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Fri, 17 Sep 2021 13:26:14 -0600 Subject: selftests: net: af_unix: Fix incorrect args in test result msg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the args to fprintf(). Splitting the message ends up passing incorrect arg for "sigurg %d" and an extra arg overall. The test result message ends up incorrect. test_unix_oob.c: In function ‘main’: test_unix_oob.c:274:43: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘char *’ [-Wformat=] 274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ", | ~^ | | | int | %s 275 | "atmark %d\n", signal_recvd, len, oob, atmark); | ~~~~~~~~~~~~~ | | | char * test_unix_oob.c:274:19: warning: too many arguments for format [-Wformat-extra-args] 274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ", Signed-off-by: Shuah Khan Signed-off-by: David S. Miller --- tools/testing/selftests/net/af_unix/test_unix_oob.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/af_unix/test_unix_oob.c b/tools/testing/selftests/net/af_unix/test_unix_oob.c index 0f3e3763f4f8..3dece8b29253 100644 --- a/tools/testing/selftests/net/af_unix/test_unix_oob.c +++ b/tools/testing/selftests/net/af_unix/test_unix_oob.c @@ -271,8 +271,9 @@ main(int argc, char **argv) read_oob(pfd, &oob); if (!signal_recvd || len != 127 || oob != '%' || atmark != 1) { - fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ", - "atmark %d\n", signal_recvd, len, oob, atmark); + fprintf(stderr, + "Test 3 failed, sigurg %d len %d OOB %c atmark %d\n", + signal_recvd, len, oob, atmark); die(1); } -- cgit From 72a3c58d18fd780eecd80178bb2132ce741a0a74 Mon Sep 17 00:00:00 2001 From: Lama Kayal Date: Sun, 19 Sep 2021 14:55:45 +0300 Subject: net/mlx4_en: Resolve bad operstate value Any link state change that's done prior to net device registration isn't reflected on the state, thus the operational state is left obsolete, with 'UNKNOWN' status. To resolve the issue, query link state from FW upon open operations to ensure operational state is updated. Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Lama Kayal Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 47 ++++++++++++++++---------- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 - 2 files changed, 29 insertions(+), 19 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index a2f61a87cef8..35154635ec3a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1269,7 +1269,6 @@ static void mlx4_en_do_set_rx_mode(struct work_struct *work) if (!netif_carrier_ok(dev)) { if (!mlx4_en_QUERY_PORT(mdev, priv->port)) { if (priv->port_state.link_state) { - priv->last_link_state = MLX4_DEV_EVENT_PORT_UP; netif_carrier_on(dev); en_dbg(LINK, priv, "Link Up\n"); } @@ -1557,26 +1556,36 @@ static void mlx4_en_service_task(struct work_struct *work) mutex_unlock(&mdev->state_lock); } -static void mlx4_en_linkstate(struct work_struct *work) +static void mlx4_en_linkstate(struct mlx4_en_priv *priv) +{ + struct mlx4_en_port_state *port_state = &priv->port_state; + struct mlx4_en_dev *mdev = priv->mdev; + struct net_device *dev = priv->dev; + bool up; + + if (mlx4_en_QUERY_PORT(mdev, priv->port)) + port_state->link_state = MLX4_PORT_STATE_DEV_EVENT_PORT_DOWN; + + up = port_state->link_state == MLX4_PORT_STATE_DEV_EVENT_PORT_UP; + if (up == netif_carrier_ok(dev)) + netif_carrier_event(dev); + if (!up) { + en_info(priv, "Link Down\n"); + netif_carrier_off(dev); + } else { + en_info(priv, "Link Up\n"); + netif_carrier_on(dev); + } +} + +static void mlx4_en_linkstate_work(struct work_struct *work) { struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, linkstate_task); struct mlx4_en_dev *mdev = priv->mdev; - int linkstate = priv->link_state; mutex_lock(&mdev->state_lock); - /* If observable port state changed set carrier state and - * report to system log */ - if (priv->last_link_state != linkstate) { - if (linkstate == MLX4_DEV_EVENT_PORT_DOWN) { - en_info(priv, "Link Down\n"); - netif_carrier_off(priv->dev); - } else { - en_info(priv, "Link Up\n"); - netif_carrier_on(priv->dev); - } - } - priv->last_link_state = linkstate; + mlx4_en_linkstate(priv); mutex_unlock(&mdev->state_lock); } @@ -2079,9 +2088,11 @@ static int mlx4_en_open(struct net_device *dev) mlx4_en_clear_stats(dev); err = mlx4_en_start_port(dev); - if (err) + if (err) { en_err(priv, "Failed starting port:%d\n", priv->port); - + goto out; + } + mlx4_en_linkstate(priv); out: mutex_unlock(&mdev->state_lock); return err; @@ -3168,7 +3179,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, spin_lock_init(&priv->stats_lock); INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode); INIT_WORK(&priv->restart_task, mlx4_en_restart); - INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate); + INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate_work); INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats); INIT_DELAYED_WORK(&priv->service_task, mlx4_en_service_task); #ifdef CONFIG_RFS_ACCEL diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index f3d1a20201ef..6bf558c5ec10 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -552,7 +552,6 @@ struct mlx4_en_priv { struct mlx4_hwq_resources res; int link_state; - int last_link_state; bool port_up; int port; int registered; -- cgit From e30cd812dffadc58241ae378e48728e6a161becd Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Fri, 17 Sep 2021 15:53:56 -0600 Subject: selftests: net: af_unix: Fix makefile to use TEST_GEN_PROGS Makefile uses TEST_PROGS instead of TEST_GEN_PROGS to define executables. TEST_PROGS is for shell scripts that need to be installed and run by the common lib.mk framework. The common framework doesn't touch TEST_PROGS when it does build and clean. As a result "make kselftest-clean" and "make clean" fail to remove executables. Run and install work because the common framework runs and installs TEST_PROGS. Build works because the Makefile defines "all" rule which is unnecessary if TEST_GEN_PROGS is used. Use TEST_GEN_PROGS so the common framework can handle build/run/ install/clean properly. Signed-off-by: Shuah Khan Signed-off-by: David S. Miller --- tools/testing/selftests/net/af_unix/Makefile | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/tools/testing/selftests/net/af_unix/Makefile b/tools/testing/selftests/net/af_unix/Makefile index cfc7f4f97fd1..df341648f818 100644 --- a/tools/testing/selftests/net/af_unix/Makefile +++ b/tools/testing/selftests/net/af_unix/Makefile @@ -1,5 +1,2 @@ -##TEST_GEN_FILES := test_unix_oob -TEST_PROGS := test_unix_oob +TEST_GEN_PROGS := test_unix_oob include ../../lib.mk - -all: $(TEST_PROGS) -- cgit From b51593c4cd739dff7fc40bbed368572d98b19ae8 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Fri, 17 Sep 2021 09:13:23 -0400 Subject: init/do_mounts.c: Harden split_fs_names() against buffer overflow split_fs_names() currently takes comma separate list of filesystems and converts it into individual filesystem strings. Pleaces these strings in the input buffer passed by caller and returns number of strings. If caller manages to pass input string bigger than buffer, then we can write beyond the buffer. Or if string just fits buffer, we will still write beyond the buffer as we append a '\0' byte at the end. Pass size of input buffer to split_fs_names() and put enough checks in place so such buffer overrun possibilities do not occur. This patch does few things. - Add a parameter "size" to split_fs_names(). This specifies size of input buffer. - Use strlcpy() (instead of strcpy()) so that we can't go beyond buffer size. If input string "names" is larger than passed in buffer, input string will be truncated to fit in buffer. - Stop appending extra '\0' character at the end and avoid one possibility of going beyond the input buffer size. - Do not use extra loop to count number of strings. - Previously if one passed "rootfstype=foo,,bar", split_fs_names() will return only 1 string "foo" (and "bar" will be truncated due to extra ,). After this patch, now split_fs_names() will return 3 strings ("foo", zero-sized-string, and "bar"). Callers of split_fs_names() have been modified to check for zero sized string and skip to next one. Reported-by: xu xin Signed-off-by: Vivek Goyal Reviewed-by: Jan Kara Signed-off-by: Al Viro --- init/do_mounts.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) diff --git a/init/do_mounts.c b/init/do_mounts.c index 2ed30ff6c906..9207bde9ca3f 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -338,20 +338,19 @@ __setup("rootflags=", root_data_setup); __setup("rootfstype=", fs_names_setup); __setup("rootdelay=", root_delay_setup); -static int __init split_fs_names(char *page, char *names) +/* This can return zero length strings. Caller should check */ +static int __init split_fs_names(char *page, size_t size, char *names) { - int count = 0; + int count = 1; char *p = page; - strcpy(p, root_fs_names); + strlcpy(p, root_fs_names, size); while (*p++) { - if (p[-1] == ',') + if (p[-1] == ',') { p[-1] = '\0'; + count++; + } } - *p = '\0'; - - for (p = page; *p; p += strlen(p)+1) - count++; return count; } @@ -404,12 +403,16 @@ void __init mount_block_root(char *name, int flags) scnprintf(b, BDEVNAME_SIZE, "unknown-block(%u,%u)", MAJOR(ROOT_DEV), MINOR(ROOT_DEV)); if (root_fs_names) - num_fs = split_fs_names(fs_names, root_fs_names); + num_fs = split_fs_names(fs_names, PAGE_SIZE, root_fs_names); else num_fs = list_bdev_fs_names(fs_names, PAGE_SIZE); retry: for (i = 0, p = fs_names; i < num_fs; i++, p += strlen(p)+1) { - int err = do_mount_root(name, p, flags, root_mount_data); + int err; + + if (!*p) + continue; + err = do_mount_root(name, p, flags, root_mount_data); switch (err) { case 0: goto out; @@ -543,10 +546,12 @@ static int __init mount_nodev_root(void) fs_names = (void *)__get_free_page(GFP_KERNEL); if (!fs_names) return -EINVAL; - num_fs = split_fs_names(fs_names, root_fs_names); + num_fs = split_fs_names(fs_names, PAGE_SIZE, root_fs_names); for (i = 0, fstype = fs_names; i < num_fs; i++, fstype += strlen(fstype) + 1) { + if (!*fstype) + continue; if (!fs_is_nodev(fstype)) continue; err = do_mount_root(root_device_name, fstype, root_mountflags, -- cgit From 40c8ee67cfc49d00a13ccbf542e307b6b5421ad3 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Tue, 14 Sep 2021 12:12:10 +0300 Subject: init: don't panic if mount_nodev_root failed Attempt to mount 9p file system as root gives the following kernel panic: 9pnet_virtio: no channels available for device root Kernel panic - not syncing: VFS: Unable to mount root "root" (9p), err=-2 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc1+ #127 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x45/0x59 panic+0x1e2/0x44b ? __warn_printk+0xf3/0xf3 ? free_unref_page+0x2d4/0x4a0 ? trace_hardirqs_on+0x32/0x120 ? free_unref_page+0x2d4/0x4a0 mount_root+0x189/0x1e0 prepare_namespace+0x136/0x165 kernel_init_freeable+0x3b8/0x3cb ? rest_init+0x2e0/0x2e0 kernel_init+0x19/0x130 ret_from_fork+0x1f/0x30 Kernel Offset: disabled ---[ end Kernel panic - not syncing: VFS: Unable to mount root "root" (9p), err=-2 ]--- QEMU command line: "qemu-system-x86_64 -append root=/dev/root rw rootfstype=9p rootflags=trans=virtio ..." This error is because root_device_name is truncated in prepare_namespace() from being "/dev/root" to be "root" prior to call to mount_nodev_root(). As a solution, don't treat errors in mount_nodev_root() as errors that require panics and allow failback to the mount flow that existed before patch citied in Fixes tag. Fixes: f9259be6a9e7 ("init: allow mounting arbitrary non-blockdevice filesystems as root") Signed-off-by: Leon Romanovsky Reviewed-by: Christoph Hellwig Signed-off-by: Al Viro --- init/do_mounts.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/init/do_mounts.c b/init/do_mounts.c index 9207bde9ca3f..762b534978d9 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -558,9 +558,6 @@ static int __init mount_nodev_root(void) root_mount_data); if (!err) break; - if (err != -EACCES && err != -EINVAL) - panic("VFS: Unable to mount root \"%s\" (%s), err=%d\n", - root_device_name, fstype, err); } free_page((unsigned long)fs_names); -- cgit From 3765996e4f0b8a755cab215a08df744490c76052 Mon Sep 17 00:00:00 2001 From: Xuan Zhuo Date: Sat, 18 Sep 2021 16:52:32 +0800 Subject: napi: fix race inside napi_enable The process will cause napi.state to contain NAPI_STATE_SCHED and not in the poll_list, which will cause napi_disable() to get stuck. The prefix "NAPI_STATE_" is removed in the figure below, and NAPI_STATE_HASHED is ignored in napi.state. CPU0 | CPU1 | napi.state =============================================================================== napi_disable() | | SCHED | NPSVC napi_enable() | | { | | smp_mb__before_atomic(); | | clear_bit(SCHED, &n->state); | | NPSVC | napi_schedule_prep() | SCHED | NPSVC | napi_poll() | | napi_complete_done() | | { | | if (n->state & (NPSVC | | (1) | _BUSY_POLL))) | | return false; | | ................ | | } | SCHED | NPSVC | | clear_bit(NPSVC, &n->state); | | SCHED } | | | | napi_schedule_prep() | | SCHED | MISSED (2) (1) Here return direct. Because of NAPI_STATE_NPSVC exists. (2) NAPI_STATE_SCHED exists. So not add napi.poll_list to sd->poll_list Since NAPI_STATE_SCHED already exists and napi is not in the sd->poll_list queue, NAPI_STATE_SCHED cannot be cleared and will always exist. 1. This will cause this queue to no longer receive packets. 2. If you encounter napi_disable under the protection of rtnl_lock, it will cause the entire rtnl_lock to be locked, affecting the overall system. This patch uses cmpxchg to implement napi_enable(), which ensures that there will be no race due to the separation of clear two bits. Fixes: 2d8bff12699abc ("netpoll: Close race condition between poll_one_napi and napi_disable") Signed-off-by: Xuan Zhuo Reviewed-by: Dust Li Signed-off-by: David S. Miller --- net/core/dev.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 74fd402d26dd..7ee9fecd3aff 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -6923,12 +6923,16 @@ EXPORT_SYMBOL(napi_disable); */ void napi_enable(struct napi_struct *n) { - BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)); - smp_mb__before_atomic(); - clear_bit(NAPI_STATE_SCHED, &n->state); - clear_bit(NAPI_STATE_NPSVC, &n->state); - if (n->dev->threaded && n->thread) - set_bit(NAPI_STATE_THREADED, &n->state); + unsigned long val, new; + + do { + val = READ_ONCE(n->state); + BUG_ON(!test_bit(NAPI_STATE_SCHED, &val)); + + new = val & ~(NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC); + if (n->dev->threaded && n->thread) + new |= NAPIF_STATE_THREADED; + } while (cmpxchg(&n->state, val, new) != val); } EXPORT_SYMBOL(napi_enable); -- cgit From 563f23b002534176f49524b5ca0e1d94d8906c40 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Fri, 17 Sep 2021 16:02:18 +0300 Subject: nexthop: Fix division by zero while replacing a resilient group The resilient nexthop group torture tests in fib_nexthop.sh exposed a possible division by zero while replacing a resilient group [1]. The division by zero occurs when the data path sees a resilient nexthop group with zero buckets. The tests replace a resilient nexthop group in a loop while traffic is forwarded through it. The tests do not specify the number of buckets while performing the replacement, resulting in the kernel allocating a stub resilient table (i.e, 'struct nh_res_table') with zero buckets. This table should never be visible to the data path, but the old nexthop group (i.e., 'oldg') might still be used by the data path when the stub table is assigned to it. Fix this by only assigning the stub table to the old nexthop group after making sure the group is no longer used by the data path. Tested with fib_nexthops.sh: Tests passed: 222 Tests failed: 0 [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 1850 Comm: ping Not tainted 5.14.0-custom-10271-ga86eb53057fe #1107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:nexthop_select_path+0x2d2/0x1a80 [...] Call Trace: fib_select_multipath+0x79b/0x1530 fib_select_path+0x8fb/0x1c10 ip_route_output_key_hash_rcu+0x1198/0x2da0 ip_route_output_key_hash+0x190/0x340 ip_route_output_flow+0x21/0x120 raw_sendmsg+0x91d/0x2e10 inet_sendmsg+0x9e/0xe0 __sys_sendto+0x23d/0x360 __x64_sys_sendto+0xe1/0x1b0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Cc: stable@vger.kernel.org Fixes: 283a72a5599e ("nexthop: Add implementation of resilient next-hop groups") Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Reviewed-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/nexthop.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c index 75ca4b6e484f..0e75fd3e57b4 100644 --- a/net/ipv4/nexthop.c +++ b/net/ipv4/nexthop.c @@ -1982,6 +1982,8 @@ static int replace_nexthop_grp(struct net *net, struct nexthop *old, rcu_assign_pointer(old->nh_grp, newg); if (newg->resilient) { + /* Make sure concurrent readers are not using 'oldg' anymore. */ + synchronize_net(); rcu_assign_pointer(oldg->res_table, tmp_table); rcu_assign_pointer(oldg->spare->res_table, tmp_table); } -- cgit From 5bed8b0704c9ecccc8f4a2c377d7c8e21090a82e Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 20 Sep 2021 02:51:52 -0400 Subject: bnxt_en: Fix TX timeout when TX ring size is set to the smallest The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 8 ++++---- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 5 +++++ drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- 3 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 037767b370d5..62f84cc91e4d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -391,7 +391,7 @@ static bool bnxt_txr_netif_try_stop_queue(struct bnxt *bp, * netif_tx_queue_stopped(). */ smp_mb(); - if (bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh) { + if (bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh) { netif_tx_wake_queue(txq); return false; } @@ -764,7 +764,7 @@ next_tx_int: smp_mb(); if (unlikely(netif_tx_queue_stopped(txq)) && - bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh && + bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh && READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING) netif_tx_wake_queue(txq); } @@ -2416,7 +2416,7 @@ static int __bnxt_poll_work(struct bnxt *bp, struct bnxt_cp_ring_info *cpr, if (TX_CMP_TYPE(txcmp) == CMP_TYPE_TX_L2_CMP) { tx_pkts++; /* return full budget so NAPI will complete. */ - if (unlikely(tx_pkts > bp->tx_wake_thresh)) { + if (unlikely(tx_pkts >= bp->tx_wake_thresh)) { rx_pkts = budget; raw_cons = NEXT_RAW_CMP(raw_cons); if (budget) @@ -3640,7 +3640,7 @@ static int bnxt_init_tx_rings(struct bnxt *bp) u16 i; bp->tx_wake_thresh = max_t(int, bp->tx_ring_size / 2, - MAX_SKB_FRAGS + 1); + BNXT_MIN_TX_DESC_CNT); for (i = 0; i < bp->tx_nr_rings; i++) { struct bnxt_tx_ring_info *txr = &bp->tx_ring[i]; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index ec046e7a2484..19fe6478e9b4 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -629,6 +629,11 @@ struct nqe_cn { #define BNXT_MAX_RX_JUM_DESC_CNT (RX_DESC_CNT * MAX_RX_AGG_PAGES - 1) #define BNXT_MAX_TX_DESC_CNT (TX_DESC_CNT * MAX_TX_PAGES - 1) +/* Minimum TX BDs for a TX packet with MAX_SKB_FRAGS + 1. We need one extra + * BD because the first TX BD is always a long BD. + */ +#define BNXT_MIN_TX_DESC_CNT (MAX_SKB_FRAGS + 2) + #define RX_RING(x) (((x) & ~(RX_DESC_CNT - 1)) >> (BNXT_PAGE_SHIFT - 4)) #define RX_IDX(x) ((x) & (RX_DESC_CNT - 1)) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index b056e3c29bbd..7260910e75fb 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -798,7 +798,7 @@ static int bnxt_set_ringparam(struct net_device *dev, if ((ering->rx_pending > BNXT_MAX_RX_DESC_CNT) || (ering->tx_pending > BNXT_MAX_TX_DESC_CNT) || - (ering->tx_pending <= MAX_SKB_FRAGS)) + (ering->tx_pending < BNXT_MIN_TX_DESC_CNT)) return -EINVAL; if (netif_running(dev)) -- cgit From 211f323768a25b30c106fd38f15a0f62c7c2b5f4 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 17 Sep 2021 11:18:47 +0200 Subject: USB: serial: mos7840: remove duplicated 0xac24 device ID 0xac24 device ID is already defined and used via BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list. Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver") Signed-off-by: Krzysztof Kozlowski Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/mos7840.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index d7fe33ca73e4..925067a7978d 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -107,7 +107,6 @@ #define BANDB_DEVICE_ID_USOPTL4_2P 0xBC02 #define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 #define BANDB_DEVICE_ID_USOPTL4_4P 0xBC03 -#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24 /* Interrupt Routine Defines */ @@ -186,7 +185,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P) }, { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4) }, { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P) }, - { USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4) }, {} /* terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit From 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 17 Sep 2021 11:18:48 +0200 Subject: USB: serial: option: remove duplicate USB device ID The device ZTE 0x0094 is already on the list. Signed-off-by: Krzysztof Kozlowski Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a79f51e35115..02a35f26ee82 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1658,7 +1658,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff), .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff), -- cgit From 42a99a0be307562c1bfef32bad8f89aa3c428edd Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Sep 2021 11:57:49 +0200 Subject: ptp: ocp: add COMMON_CLK dependency Without CONFIG_COMMON_CLK, this fails to link: arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_register_i2c': ptp_ocp.c:(.text+0xcc0): undefined reference to `__clk_hw_register_fixed_rate' arm-linux-gnueabi-ld: ptp_ocp.c:(.text+0xcf4): undefined reference to `devm_clk_hw_register_clkdev' arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_detach': ptp_ocp.c:(.text+0x1c24): undefined reference to `clk_hw_unregister_fixed_rate' Fixes: a7e1abad13f3 ("ptp: Add clock driver for the OpenCompute TimeCard.") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/ptp/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig index f02bedf41264..458218f88c5e 100644 --- a/drivers/ptp/Kconfig +++ b/drivers/ptp/Kconfig @@ -174,6 +174,7 @@ config PTP_1588_CLOCK_OCP depends on I2C && MTD depends on SERIAL_8250 depends on !S390 + depends on COMMON_CLK select NET_DEVLINK help This driver adds support for an OpenCompute time card. -- cgit From aa3233ea7bdb6c4004f5032a3a07417ea51dc409 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Sep 2021 11:55:09 +0200 Subject: staging: r8188eu: fix -Wrestrict warnings Adding back the nonstandard ioctl commands caused -Wrestrict warnings when building with 'make W=1': drivers/staging/r8188eu/os_dep/ioctl_linux.c: In function 'rtw_mp_read_rf': drivers/staging/r8188eu/os_dep/ioctl_linux.c:5515:27: error: 'sprintf' argument 3 overlaps destination object 'extra' [-Werror=restrict] 5515 | sprintf(extra, "%s %d", extra, strtou); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/staging/r8188eu/os_dep/ioctl_linux.c:5470:54: note: destination object referenced by 'restrict'-qualified argument 1 was declared here 5470 | struct iw_point *wrqu, char *extra) | ~~~~~~^~~~~ Change these to the same construct used elsewhere in that driver, with an offset to the string to make the warning go away. The ioctl commands were previously removed, and it's unlikely that anything is actually using them, so ideally I would prefer to have them removed again. The lack of range checking of the 'extra' output buffer is also slightly worrying, but I did not check whether this could cause harm. Fixes: 2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210920095525.1150678-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/r8188eu/os_dep/ioctl_linux.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/staging/r8188eu/os_dep/ioctl_linux.c b/drivers/staging/r8188eu/os_dep/ioctl_linux.c index 81d4255d1785..1fd375076001 100644 --- a/drivers/staging/r8188eu/os_dep/ioctl_linux.c +++ b/drivers/staging/r8188eu/os_dep/ioctl_linux.c @@ -5372,8 +5372,8 @@ static int rtw_mp_read_reg(struct net_device *dev, pnext++; if (*pnext != '\0') { - strtout = simple_strtoul(pnext, &ptmp, 16); - sprintf(extra, "%s %d", extra, strtout); + strtout = simple_strtoul(pnext, &ptmp, 16); + sprintf(extra + strlen(extra), " %d", strtout); } else { break; } @@ -5405,7 +5405,7 @@ static int rtw_mp_read_reg(struct net_device *dev, pnext++; if (*pnext != '\0') { strtout = simple_strtoul(pnext, &ptmp, 16); - sprintf(extra, "%s %d", extra, strtout); + sprintf(extra + strlen(extra), " %d", strtout); } else { break; } @@ -5512,7 +5512,7 @@ static int rtw_mp_read_rf(struct net_device *dev, pnext++; if (*pnext != '\0') { strtou = simple_strtoul(pnext, &ptmp, 16); - sprintf(extra, "%s %d", extra, strtou); + sprintf(extra + strlen(extra), " %d", strtou); } else { break; } -- cgit From e184cec5e29d8eb3c3435b12a9074b75e2d69e4a Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 15 Sep 2021 21:52:06 +0800 Subject: net: hns3: fix change RSS 'hfunc' ineffective issue When user change rss 'hfunc' without set rss 'hkey' by ethtool -X command, the driver will ignore the 'hfunc' for the hkey is NULL. It's unreasonable. So fix it. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: 374ad291762a ("net: hns3: Add RSS general configuration support for VF") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 45 ++++++++++++------- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 52 ++++++++++++++-------- 2 files changed, 64 insertions(+), 33 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index f1e46ba799f9..36c8741445e8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -4741,6 +4741,24 @@ static int hclge_get_rss(struct hnae3_handle *handle, u32 *indir, return 0; } +static int hclge_parse_rss_hfunc(struct hclge_vport *vport, const u8 hfunc, + u8 *hash_algo) +{ + switch (hfunc) { + case ETH_RSS_HASH_TOP: + *hash_algo = HCLGE_RSS_HASH_ALGO_TOEPLITZ; + return 0; + case ETH_RSS_HASH_XOR: + *hash_algo = HCLGE_RSS_HASH_ALGO_SIMPLE; + return 0; + case ETH_RSS_HASH_NO_CHANGE: + *hash_algo = vport->rss_algo; + return 0; + default: + return -EINVAL; + } +} + static int hclge_set_rss(struct hnae3_handle *handle, const u32 *indir, const u8 *key, const u8 hfunc) { @@ -4750,30 +4768,27 @@ static int hclge_set_rss(struct hnae3_handle *handle, const u32 *indir, u8 hash_algo; int ret, i; + ret = hclge_parse_rss_hfunc(vport, hfunc, &hash_algo); + if (ret) { + dev_err(&hdev->pdev->dev, "invalid hfunc type %u\n", hfunc); + return ret; + } + /* Set the RSS Hash Key if specififed by the user */ if (key) { - switch (hfunc) { - case ETH_RSS_HASH_TOP: - hash_algo = HCLGE_RSS_HASH_ALGO_TOEPLITZ; - break; - case ETH_RSS_HASH_XOR: - hash_algo = HCLGE_RSS_HASH_ALGO_SIMPLE; - break; - case ETH_RSS_HASH_NO_CHANGE: - hash_algo = vport->rss_algo; - break; - default: - return -EINVAL; - } - ret = hclge_set_rss_algo_key(hdev, hash_algo, key); if (ret) return ret; /* Update the shadow RSS key with user specified qids */ memcpy(vport->rss_hash_key, key, HCLGE_RSS_KEY_SIZE); - vport->rss_algo = hash_algo; + } else { + ret = hclge_set_rss_algo_key(hdev, hash_algo, + vport->rss_hash_key); + if (ret) + return ret; } + vport->rss_algo = hash_algo; /* Update the shadow RSS table with user specified qids */ for (i = 0; i < ae_dev->dev_specs.rss_ind_tbl_size; i++) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index a69e892277b3..5fdac8685f95 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -816,40 +816,56 @@ static int hclgevf_get_rss(struct hnae3_handle *handle, u32 *indir, u8 *key, return 0; } +static int hclgevf_parse_rss_hfunc(struct hclgevf_dev *hdev, const u8 hfunc, + u8 *hash_algo) +{ + switch (hfunc) { + case ETH_RSS_HASH_TOP: + *hash_algo = HCLGEVF_RSS_HASH_ALGO_TOEPLITZ; + return 0; + case ETH_RSS_HASH_XOR: + *hash_algo = HCLGEVF_RSS_HASH_ALGO_SIMPLE; + return 0; + case ETH_RSS_HASH_NO_CHANGE: + *hash_algo = hdev->rss_cfg.hash_algo; + return 0; + default: + return -EINVAL; + } +} + static int hclgevf_set_rss(struct hnae3_handle *handle, const u32 *indir, const u8 *key, const u8 hfunc) { struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle); struct hclgevf_rss_cfg *rss_cfg = &hdev->rss_cfg; + u8 hash_algo; int ret, i; if (hdev->ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V2) { + ret = hclgevf_parse_rss_hfunc(hdev, hfunc, &hash_algo); + if (ret) + return ret; + /* Set the RSS Hash Key if specififed by the user */ if (key) { - switch (hfunc) { - case ETH_RSS_HASH_TOP: - rss_cfg->hash_algo = - HCLGEVF_RSS_HASH_ALGO_TOEPLITZ; - break; - case ETH_RSS_HASH_XOR: - rss_cfg->hash_algo = - HCLGEVF_RSS_HASH_ALGO_SIMPLE; - break; - case ETH_RSS_HASH_NO_CHANGE: - break; - default: - return -EINVAL; - } - - ret = hclgevf_set_rss_algo_key(hdev, rss_cfg->hash_algo, - key); - if (ret) + ret = hclgevf_set_rss_algo_key(hdev, hash_algo, key); + if (ret) { + dev_err(&hdev->pdev->dev, + "invalid hfunc type %u\n", hfunc); return ret; + } /* Update the shadow RSS key with user specified qids */ memcpy(rss_cfg->rss_hash_key, key, HCLGEVF_RSS_KEY_SIZE); + } else { + ret = hclgevf_set_rss_algo_key(hdev, hash_algo, + rss_cfg->rss_hash_key); + if (ret) + return ret; } + rss_cfg->hash_algo = hash_algo; } /* update the shadow RSS table with user specified qids */ -- cgit From 91bc0d5272d3a4dc3d4fd2a74387c7e7361bbe96 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 15 Sep 2021 21:52:07 +0800 Subject: net: hns3: fix inconsistent vf id print The vf id from ethtool is added 1 before configured to driver. So it's necessary to minus 1 when printing it, in order to keep consistent with user's configuration. Fixes: dd74f815dd41 ("net: hns3: Add support for rule add/delete for flow director") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 36c8741445e8..c0f25ea043b0 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -6642,10 +6642,13 @@ static int hclge_fd_parse_ring_cookie(struct hclge_dev *hdev, u64 ring_cookie, u8 vf = ethtool_get_flow_spec_ring_vf(ring_cookie); u16 tqps; + /* To keep consistent with user's configuration, minus 1 when + * printing 'vf', because vf id from ethtool is added 1 for vf. + */ if (vf > hdev->num_req_vfs) { dev_err(&hdev->pdev->dev, - "Error: vf id (%u) > max vf num (%u)\n", - vf, hdev->num_req_vfs); + "Error: vf id (%u) should be less than %u\n", + vf - 1, hdev->num_req_vfs); return -EINVAL; } -- cgit From 311c0aaa9b4bb8dc65f22634e15963316b17c921 Mon Sep 17 00:00:00 2001 From: Jiaran Zhang Date: Wed, 15 Sep 2021 21:52:08 +0800 Subject: net: hns3: fix misuse vf id and vport id in some logs vport_id include PF and VFs, vport_id = 0 means PF, other values mean VFs. So the actual vf id is equal to vport_id minus 1. Some VF print logs are actually vport, and logs of vf id actually use vport id, so this patch fixes them. Fixes: ac887be5b0fe ("net: hns3: change print level of RAS error log from warning to error") Fixes: adcf738b804b ("net: hns3: cleanup some print format warning") Signed-off-by: Jiaran Zhang Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 8 ++++---- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 10 ++++++---- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +- 4 files changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c index 718c16d686fa..bb9b026ae88e 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c @@ -2445,12 +2445,12 @@ static void hclge_handle_over_8bd_err(struct hclge_dev *hdev, return; } - dev_err(dev, "PPU_PF_ABNORMAL_INT_ST over_8bd_no_fe found, vf_id(%u), queue_id(%u)\n", + dev_err(dev, "PPU_PF_ABNORMAL_INT_ST over_8bd_no_fe found, vport(%u), queue_id(%u)\n", vf_id, q_id); if (vf_id) { if (vf_id >= hdev->num_alloc_vport) { - dev_err(dev, "invalid vf id(%u)\n", vf_id); + dev_err(dev, "invalid vport(%u)\n", vf_id); return; } @@ -2463,8 +2463,8 @@ static void hclge_handle_over_8bd_err(struct hclge_dev *hdev, ret = hclge_inform_reset_assert_to_vf(&hdev->vport[vf_id]); if (ret) - dev_err(dev, "inform reset to vf(%u) failed %d!\n", - hdev->vport->vport_id, ret); + dev_err(dev, "inform reset to vport(%u) failed %d!\n", + vf_id, ret); } else { set_bit(HNAE3_FUNC_RESET, reset_requests); } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index c0f25ea043b0..afc88a41a89c 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3661,7 +3661,8 @@ static int hclge_set_all_vf_rst(struct hclge_dev *hdev, bool reset) if (ret) { dev_err(&hdev->pdev->dev, "set vf(%u) rst failed %d!\n", - vport->vport_id, ret); + vport->vport_id - HCLGE_VF_VPORT_START_NUM, + ret); return ret; } @@ -3676,7 +3677,8 @@ static int hclge_set_all_vf_rst(struct hclge_dev *hdev, bool reset) if (ret) dev_warn(&hdev->pdev->dev, "inform reset to vf(%u) failed %d!\n", - vport->vport_id, ret); + vport->vport_id - HCLGE_VF_VPORT_START_NUM, + ret); } return 0; @@ -11467,11 +11469,11 @@ static void hclge_clear_resetting_state(struct hclge_dev *hdev) struct hclge_vport *vport = &hdev->vport[i]; int ret; - /* Send cmd to clear VF's FUNC_RST_ING */ + /* Send cmd to clear vport's FUNC_RST_ING */ ret = hclge_set_vf_rst(hdev, vport->vport_id, false); if (ret) dev_warn(&hdev->pdev->dev, - "clear vf(%u) rst failed %d!\n", + "clear vport(%u) rst failed %d!\n", vport->vport_id, ret); } } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c index 2ce5302c5956..07aa6ada4fdb 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c @@ -566,7 +566,7 @@ static int hclge_reset_vf(struct hclge_vport *vport) struct hclge_dev *hdev = vport->back; dev_warn(&hdev->pdev->dev, "PF received VF reset request from VF %u!", - vport->vport_id); + vport->vport_id - HCLGE_VF_VPORT_START_NUM); return hclge_func_reset_cmd(hdev, vport->vport_id); } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 78d5bf1ea561..44618cc4cca1 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -581,7 +581,7 @@ int hclge_tm_qs_shaper_cfg(struct hclge_vport *vport, int max_tx_rate) ret = hclge_cmd_send(&hdev->hw, &desc, 1); if (ret) { dev_err(&hdev->pdev->dev, - "vf%u, qs%u failed to set tx_rate:%d, ret=%d\n", + "vport%u, qs%u failed to set tx_rate:%d, ret=%d\n", vport->vport_id, shap_cfg_cmd->qs_id, max_tx_rate, ret); return ret; -- cgit From 63b1279d9905100a14da9e043de7b28e99dba3f8 Mon Sep 17 00:00:00 2001 From: Yufeng Mo Date: Wed, 15 Sep 2021 21:52:09 +0800 Subject: net: hns3: check queue id range before using The input parameters may not be reliable. Before using the queue id, we should check this parameter. Otherwise, memory overwriting may occur. Fixes: d34100184685 ("net: hns3: refactor the mailbox message between PF and VF") Signed-off-by: Yufeng Mo Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c index 07aa6ada4fdb..65d78ee4d65a 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c @@ -590,9 +590,17 @@ static void hclge_get_queue_id_in_pf(struct hclge_vport *vport, struct hclge_mbx_vf_to_pf_cmd *mbx_req, struct hclge_respond_to_vf_msg *resp_msg) { + struct hnae3_handle *handle = &vport->nic; + struct hclge_dev *hdev = vport->back; u16 queue_id, qid_in_pf; memcpy(&queue_id, mbx_req->msg.data, sizeof(queue_id)); + if (queue_id >= handle->kinfo.num_tqps) { + dev_err(&hdev->pdev->dev, "Invalid queue id(%u) from VF %u\n", + queue_id, mbx_req->mbx_src_vfid); + return; + } + qid_in_pf = hclge_covert_handle_qid_global(&vport->nic, queue_id); memcpy(resp_msg->data, &qid_in_pf, sizeof(qid_in_pf)); resp_msg->len = sizeof(qid_in_pf); -- cgit From ef39d632608e66f428c1246836fd060cf4818d67 Mon Sep 17 00:00:00 2001 From: liaoguojia Date: Wed, 15 Sep 2021 21:52:10 +0800 Subject: net: hns3: check vlan id before using it The input parameters may not be reliable, so check the vlan id before using it, otherwise may set wrong vlan id into hardware. Fixes: dc8131d846d4 ("net: hns3: Fix for packet loss due wrong filter config in VLAN tbls") Signed-off-by: liaoguojia Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index afc88a41a89c..14e9daf09f8c 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -9817,6 +9817,9 @@ static int hclge_set_vlan_filter_hw(struct hclge_dev *hdev, __be16 proto, if (is_kill && !vlan_id) return 0; + if (vlan_id >= VLAN_N_VID) + return -EINVAL; + ret = hclge_set_vf_vlan_common(hdev, vport_id, is_kill, vlan_id); if (ret) { dev_err(&hdev->pdev->dev, -- cgit From 5126b9d3d4acdebc12b9d436282f88d8a1b5146c Mon Sep 17 00:00:00 2001 From: Yufeng Mo Date: Wed, 15 Sep 2021 21:52:11 +0800 Subject: net: hns3: fix a return value error in hclge_get_reset_status() hclge_get_reset_status() should return the tqp reset status. However, if the CMDQ fails, the caller will take it as tqp reset success status by mistake. Therefore, uses a parameters to get the tqp reset status instead. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yufeng Mo Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 14e9daf09f8c..47fea8985861 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -10726,7 +10726,8 @@ static int hclge_reset_tqp_cmd_send(struct hclge_dev *hdev, u16 queue_id, return 0; } -static int hclge_get_reset_status(struct hclge_dev *hdev, u16 queue_id) +static int hclge_get_reset_status(struct hclge_dev *hdev, u16 queue_id, + u8 *reset_status) { struct hclge_reset_tqp_queue_cmd *req; struct hclge_desc desc; @@ -10744,7 +10745,9 @@ static int hclge_get_reset_status(struct hclge_dev *hdev, u16 queue_id) return ret; } - return hnae3_get_bit(req->ready_to_reset, HCLGE_TQP_RESET_B); + *reset_status = hnae3_get_bit(req->ready_to_reset, HCLGE_TQP_RESET_B); + + return 0; } u16 hclge_covert_handle_qid_global(struct hnae3_handle *handle, u16 queue_id) @@ -10763,7 +10766,7 @@ static int hclge_reset_tqp_cmd(struct hnae3_handle *handle) struct hclge_vport *vport = hclge_get_vport(handle); struct hclge_dev *hdev = vport->back; u16 reset_try_times = 0; - int reset_status; + u8 reset_status; u16 queue_gid; int ret; u16 i; @@ -10779,7 +10782,11 @@ static int hclge_reset_tqp_cmd(struct hnae3_handle *handle) } while (reset_try_times++ < HCLGE_TQP_RESET_TRY_TIMES) { - reset_status = hclge_get_reset_status(hdev, queue_gid); + ret = hclge_get_reset_status(hdev, queue_gid, + &reset_status); + if (ret) + return ret; + if (reset_status) break; -- cgit From 4403f8062abecf24794e0fd3a3e424cc63ba6662 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 16 Sep 2021 17:05:29 +0200 Subject: xen/x86: drop redundant zeroing from cpu_initialize_context() Just after having obtained the pointer from kzalloc() there's no reason at all to set part of the area to all zero yet another time. Similarly there's no point explicitly clearing "ldt_ents". Signed-off-by: Jan Beulich Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/14881835-a48e-29fa-0870-e177b10fcf65@suse.com Signed-off-by: Juergen Gross --- arch/x86/xen/smp_pv.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c index 96afadf9878e..7ed56c6075b0 100644 --- a/arch/x86/xen/smp_pv.c +++ b/arch/x86/xen/smp_pv.c @@ -290,8 +290,6 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle) gdt = get_cpu_gdt_rw(cpu); - memset(&ctxt->fpu_ctxt, 0, sizeof(ctxt->fpu_ctxt)); - /* * Bring up the CPU in cpu_bringup_and_idle() with the stack * pointing just below where pt_regs would be if it were a normal @@ -308,8 +306,6 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle) xen_copy_trap_info(ctxt->trap_ctxt); - ctxt->ldt_ents = 0; - BUG_ON((unsigned long)gdt & ~PAGE_MASK); gdt_mfn = arbitrary_virt_to_mfn(gdt); -- cgit From f28347cc66395e96712f5c2db0a302ee75bafce6 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 08:13:08 +0200 Subject: Xen/gntdev: don't ignore kernel unmapping error While working on XSA-361 and its follow-ups, I failed to spot another place where the kernel mapping part of an operation was not treated the same as the user space part. Detect and propagate errors and add a 2nd pr_debug(). Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/c2513395-74dc-aea3-9192-fd265aa44e35@suse.com Signed-off-by: Juergen Gross --- drivers/xen/gntdev.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 1e7f6b1c0c97..fec1b6537166 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -381,6 +381,14 @@ static int __unmap_grant_pages(struct gntdev_grant_map *map, int offset, map->unmap_ops[offset+i].handle, map->unmap_ops[offset+i].status); map->unmap_ops[offset+i].handle = INVALID_GRANT_HANDLE; + if (use_ptemod) { + if (map->kunmap_ops[offset+i].status) + err = -EINVAL; + pr_debug("kunmap handle=%u st=%d\n", + map->kunmap_ops[offset+i].handle, + map->kunmap_ops[offset+i].status); + map->kunmap_ops[offset+i].handle = INVALID_GRANT_HANDLE; + } } return err; } -- cgit From 9074c79b62b6e0d91d7f716c6e4e9968eaf9e043 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 12:45:49 +0200 Subject: swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests While the hypervisor hasn't been enforcing this, we would still better avoid issuing requests with GFNs not aligned to the requested order. Instead of altering the value also in the call to panic(), drop it there for being static and hence easy to determine without being part of the panic message. Signed-off-by: Jan Beulich Reviewed-by: Stefano Stabellini Link: https://lore.kernel.org/r/7b3998e3-1233-4e5a-89ec-d740e77eb166@suse.com Signed-off-by: Juergen Gross --- drivers/xen/swiotlb-xen.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 9c9ba500ef23..c0c38672fee3 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -230,10 +230,11 @@ retry: /* * Get IO TLB memory from any location. */ - start = memblock_alloc(PAGE_ALIGN(bytes), PAGE_SIZE); + start = memblock_alloc(PAGE_ALIGN(bytes), + IO_TLB_SEGSIZE << IO_TLB_SHIFT); if (!start) - panic("%s: Failed to allocate %lu bytes align=0x%lx\n", - __func__, PAGE_ALIGN(bytes), PAGE_SIZE); + panic("%s: Failed to allocate %lu bytes\n", + __func__, PAGE_ALIGN(bytes)); /* * And replace that memory with pages under 4GB. -- cgit From e243ae953b5926eba1a8fbea64cbf68094f86a44 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 12:48:03 +0200 Subject: PCI: only build xen-pcifront in PV-enabled environments The driver's module init function, pcifront_init(), invokes xen_pv_domain() first thing. That construct produces constant "false" when !CONFIG_XEN_PV. Hence there's no point building the driver in non-PV configurations. Drop the (now implicit and generally wrong) X86 dependency: At present, XEN_PV can only be set when X86 is also enabled. In general an architecture supporting Xen PV (and PCI) would want to have this driver built. Signed-off-by: Jan Beulich Reviewed-by: Stefano Stabellini Acked-by: Bjorn Helgaas Link: https://lore.kernel.org/r/3a7f6c9b-215d-b593-8056-b5fe605dafd7@suse.com Signed-off-by: Juergen Gross --- drivers/pci/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 0c473d75e625..43e615aa12ff 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -110,7 +110,7 @@ config PCI_PF_STUB config XEN_PCIDEV_FRONTEND tristate "Xen PCI Frontend" - depends on X86 && XEN + depends on XEN_PV select PCI_XEN select XEN_XENBUS_FRONTEND default y -- cgit From 8e1034a526652f265ed993fab7f659eb8ae4b6f0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 12:49:04 +0200 Subject: xen/pci-swiotlb: reduce visibility of symbols xen_swiotlb and pci_xen_swiotlb_init() are only used within the file defining them, so make them static and remove the stubs. Otoh pci_xen_swiotlb_detect() has a use (as function pointer) from the main pci-swiotlb.c file - convert its stub to a #define to NULL. Signed-off-by: Jan Beulich Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/aef5fc33-9c02-4df0-906a-5c813142e13c@suse.com Signed-off-by: Juergen Gross --- arch/x86/include/asm/xen/swiotlb-xen.h | 6 +----- arch/x86/xen/pci-swiotlb-xen.c | 4 ++-- 2 files changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/x86/include/asm/xen/swiotlb-xen.h b/arch/x86/include/asm/xen/swiotlb-xen.h index 6b56d0d45d15..66b4ddde7743 100644 --- a/arch/x86/include/asm/xen/swiotlb-xen.h +++ b/arch/x86/include/asm/xen/swiotlb-xen.h @@ -3,14 +3,10 @@ #define _ASM_X86_SWIOTLB_XEN_H #ifdef CONFIG_SWIOTLB_XEN -extern int xen_swiotlb; extern int __init pci_xen_swiotlb_detect(void); -extern void __init pci_xen_swiotlb_init(void); extern int pci_xen_swiotlb_init_late(void); #else -#define xen_swiotlb (0) -static inline int __init pci_xen_swiotlb_detect(void) { return 0; } -static inline void __init pci_xen_swiotlb_init(void) { } +#define pci_xen_swiotlb_detect NULL static inline int pci_xen_swiotlb_init_late(void) { return -ENXIO; } #endif diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c index 54f9aa7e8457..46df59aeaa06 100644 --- a/arch/x86/xen/pci-swiotlb-xen.c +++ b/arch/x86/xen/pci-swiotlb-xen.c @@ -18,7 +18,7 @@ #endif #include -int xen_swiotlb __read_mostly; +static int xen_swiotlb __read_mostly; /* * pci_xen_swiotlb_detect - set xen_swiotlb to 1 if necessary @@ -56,7 +56,7 @@ int __init pci_xen_swiotlb_detect(void) return xen_swiotlb; } -void __init pci_xen_swiotlb_init(void) +static void __init pci_xen_swiotlb_init(void) { if (xen_swiotlb) { xen_swiotlb_init_early(); -- cgit From 794d5b8a497ff053f56856472e2fae038fa761aa Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 17 Sep 2021 12:50:38 +0200 Subject: swiotlb-xen: this is PV-only on x86 The code is unreachable for HVM or PVH, and it also makes little sense in auto-translated environments. On Arm, with xen_{create,destroy}_contiguous_region() both being stubs, I have a hard time seeing what good the Xen specific variant does - the generic one ought to be fine for all purposes there. Still Arm code explicitly references symbols here, so the code will continue to be included there. Instead of making PCI_XEN's "select" conditional, simply drop it - SWIOTLB_XEN will be available unconditionally in the PV case anyway, and is - as explained above - dead code in non-PV environments. This in turn allows dropping the stubs for xen_{create,destroy}_contiguous_region(), the former of which was broken anyway - it failed to set the DMA handle output. Signed-off-by: Jan Beulich Reviewed-by: Christoph Hellwig Reviewed-by: Stefano Stabellini Link: https://lore.kernel.org/r/5947b8ae-fdc7-225c-4838-84712265fc1e@suse.com Signed-off-by: Juergen Gross --- arch/x86/Kconfig | 1 - drivers/xen/Kconfig | 1 + include/xen/xen-ops.h | 12 ------------ 3 files changed, 1 insertion(+), 13 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 88fb922c23a0..a71ced4c711f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2605,7 +2605,6 @@ config PCI_OLPC config PCI_XEN def_bool y depends on PCI && XEN - select SWIOTLB_XEN config MMCONF_FAM10H def_bool y diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index a37eb52fb401..22f5aff0c136 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -177,6 +177,7 @@ config XEN_GRANT_DMA_ALLOC config SWIOTLB_XEN def_bool y + depends on XEN_PV || ARM || ARM64 select DMA_OPS select SWIOTLB diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index 39a5580f8feb..db28e79b77ee 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -46,19 +46,7 @@ extern unsigned long *xen_contiguous_bitmap; int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order, unsigned int address_bits, dma_addr_t *dma_handle); - void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order); -#else -static inline int xen_create_contiguous_region(phys_addr_t pstart, - unsigned int order, - unsigned int address_bits, - dma_addr_t *dma_handle) -{ - return 0; -} - -static inline void xen_destroy_contiguous_region(phys_addr_t pstart, - unsigned int order) { } #endif #if defined(CONFIG_XEN_PV) -- cgit From ebcc36ea1960d79406d417cb6b107946da8b5210 Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Wed, 15 Sep 2021 05:32:43 -0700 Subject: MAINTAINERS: Update Broadcom RDMA maintainers Updating the bnxt_re maintainers as Naresh decided to leave Broadcom. Link: https://lore.kernel.org/r/1631709163-2287-13-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier Signed-off-by: Jason Gunthorpe --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..9c495ecd2248 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3821,7 +3821,6 @@ F: drivers/scsi/mpi3mr/ BROADCOM NETXTREME-E ROCE DRIVER M: Selvin Xavier -M: Naresh Kumar PBS L: linux-rdma@vger.kernel.org S: Supported W: http://www.broadcom.com -- cgit From 5b1e985f7626307c451f98883f5e2665ee208e1c Mon Sep 17 00:00:00 2001 From: Sindhu Devale Date: Thu, 16 Sep 2021 14:12:19 -0500 Subject: RDMA/irdma: Skip CQP ring during a reset Due to duplicate reset flags, CQP commands are processed during reset. This leads CQP failures such as below: irdma0: [Delete Local MAC Entry Cmd Error][op_code=49] status=-27 waiting=1 completion_err=0 maj=0x0 min=0x0 Remove the redundant flag and set the correct reset flag so CPQ is paused during reset Fixes: 8498a30e1b94 ("RDMA/irdma: Register auxiliary driver and implement private channel OPs") Link: https://lore.kernel.org/r/20210916191222.824-2-shiraz.saleem@intel.com Reported-by: LiLiang Signed-off-by: Sindhu Devale Signed-off-by: Shiraz Saleem Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/irdma/cm.c | 4 ++-- drivers/infiniband/hw/irdma/hw.c | 6 +++--- drivers/infiniband/hw/irdma/i40iw_if.c | 2 +- drivers/infiniband/hw/irdma/main.h | 1 - drivers/infiniband/hw/irdma/utils.c | 2 +- drivers/infiniband/hw/irdma/verbs.c | 3 +-- 6 files changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/hw/irdma/cm.c b/drivers/infiniband/hw/irdma/cm.c index 6b62299abfbb..6dea0a49d171 100644 --- a/drivers/infiniband/hw/irdma/cm.c +++ b/drivers/infiniband/hw/irdma/cm.c @@ -3496,7 +3496,7 @@ static void irdma_cm_disconn_true(struct irdma_qp *iwqp) original_hw_tcp_state == IRDMA_TCP_STATE_TIME_WAIT || last_ae == IRDMA_AE_RDMAP_ROE_BAD_LLP_CLOSE || last_ae == IRDMA_AE_BAD_CLOSE || - last_ae == IRDMA_AE_LLP_CONNECTION_RESET || iwdev->reset)) { + last_ae == IRDMA_AE_LLP_CONNECTION_RESET || iwdev->rf->reset)) { issue_close = 1; iwqp->cm_id = NULL; qp->term_flags = 0; @@ -4250,7 +4250,7 @@ void irdma_cm_teardown_connections(struct irdma_device *iwdev, u32 *ipaddr, teardown_entry); attr.qp_state = IB_QPS_ERR; irdma_modify_qp(&cm_node->iwqp->ibqp, &attr, IB_QP_STATE, NULL); - if (iwdev->reset) + if (iwdev->rf->reset) irdma_cm_disconn(cm_node->iwqp); irdma_rem_ref_cm_node(cm_node); } diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index 00de5ee9a260..33c06a3a4f63 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -1489,7 +1489,7 @@ void irdma_reinitialize_ieq(struct irdma_sc_vsi *vsi) irdma_puda_dele_rsrc(vsi, IRDMA_PUDA_RSRC_TYPE_IEQ, false); if (irdma_initialize_ieq(iwdev)) { - iwdev->reset = true; + iwdev->rf->reset = true; rf->gen_ops.request_reset(rf); } } @@ -1632,13 +1632,13 @@ void irdma_rt_deinit_hw(struct irdma_device *iwdev) case IEQ_CREATED: if (!iwdev->roce_mode) irdma_puda_dele_rsrc(&iwdev->vsi, IRDMA_PUDA_RSRC_TYPE_IEQ, - iwdev->reset); + iwdev->rf->reset); fallthrough; case ILQ_CREATED: if (!iwdev->roce_mode) irdma_puda_dele_rsrc(&iwdev->vsi, IRDMA_PUDA_RSRC_TYPE_ILQ, - iwdev->reset); + iwdev->rf->reset); break; default: ibdev_warn(&iwdev->ibdev, "bad init_state = %d\n", iwdev->init_state); diff --git a/drivers/infiniband/hw/irdma/i40iw_if.c b/drivers/infiniband/hw/irdma/i40iw_if.c index bddf88194d09..d219f64b2c3d 100644 --- a/drivers/infiniband/hw/irdma/i40iw_if.c +++ b/drivers/infiniband/hw/irdma/i40iw_if.c @@ -55,7 +55,7 @@ static void i40iw_close(struct i40e_info *cdev_info, struct i40e_client *client, iwdev = to_iwdev(ibdev); if (reset) - iwdev->reset = true; + iwdev->rf->reset = true; iwdev->iw_status = 0; irdma_port_ibevent(iwdev); diff --git a/drivers/infiniband/hw/irdma/main.h b/drivers/infiniband/hw/irdma/main.h index 743d9e143a99..b678fe712447 100644 --- a/drivers/infiniband/hw/irdma/main.h +++ b/drivers/infiniband/hw/irdma/main.h @@ -346,7 +346,6 @@ struct irdma_device { bool roce_mode:1; bool roce_dcqcn_en:1; bool dcb:1; - bool reset:1; bool iw_ooo:1; enum init_completion_state init_state; diff --git a/drivers/infiniband/hw/irdma/utils.c b/drivers/infiniband/hw/irdma/utils.c index e94470991fe0..ac91ea5296db 100644 --- a/drivers/infiniband/hw/irdma/utils.c +++ b/drivers/infiniband/hw/irdma/utils.c @@ -2507,7 +2507,7 @@ void irdma_modify_qp_to_err(struct irdma_sc_qp *sc_qp) struct irdma_qp *qp = sc_qp->qp_uk.back_qp; struct ib_qp_attr attr; - if (qp->iwdev->reset) + if (qp->iwdev->rf->reset) return; attr.qp_state = IB_QPS_ERR; diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index 4fc323402073..829ddfa7e144 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -535,8 +535,7 @@ static int irdma_destroy_qp(struct ib_qp *ibqp, struct ib_udata *udata) irdma_qp_rem_ref(&iwqp->ibqp); wait_for_completion(&iwqp->free_qp); irdma_free_lsmm_rsrc(iwqp); - if (!iwdev->reset) - irdma_cqp_qp_destroy_cmd(&iwdev->rf->sc_dev, &iwqp->sc_qp); + irdma_cqp_qp_destroy_cmd(&iwdev->rf->sc_dev, &iwqp->sc_qp); if (!iwqp->user_mode) { if (iwqp->iwscq) { -- cgit From f4475f249445b3c1fb99919b0514a075b6d6b3d4 Mon Sep 17 00:00:00 2001 From: Sindhu Devale Date: Thu, 16 Sep 2021 14:12:20 -0500 Subject: RDMA/irdma: Validate number of CQ entries on create CQ Add lower bound check for CQ entries at creation time. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://lore.kernel.org/r/20210916191222.824-3-shiraz.saleem@intel.com Signed-off-by: Sindhu Devale Signed-off-by: Shiraz Saleem Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/irdma/verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index 829ddfa7e144..23c47482c749 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -2034,7 +2034,7 @@ static int irdma_create_cq(struct ib_cq *ibcq, /* Kmode allocations */ int rsize; - if (entries > rf->max_cqe) { + if (entries < 1 || entries > rf->max_cqe) { err_code = -EINVAL; goto cq_free_rsrc; } -- cgit From d3bdcd59633907ee306057b6bb70f06dce47dddc Mon Sep 17 00:00:00 2001 From: Sindhu Devale Date: Thu, 16 Sep 2021 14:12:21 -0500 Subject: RDMA/irdma: Report correct WC error when transport retry counter is exceeded When the retry counter exceeds, as the remote QP didn't send any Ack or Nack an asynchronous event (AE) for too many retries is generated. Add code to handle the AE and set the correct IB WC error code IB_WC_RETRY_EXC_ERR. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://lore.kernel.org/r/20210916191222.824-4-shiraz.saleem@intel.com Signed-off-by: Sindhu Devale Signed-off-by: Shiraz Saleem Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/irdma/hw.c | 3 +++ drivers/infiniband/hw/irdma/user.h | 1 + drivers/infiniband/hw/irdma/verbs.c | 2 ++ 3 files changed, 6 insertions(+) diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index 33c06a3a4f63..cb9a8e24e3b7 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -176,6 +176,9 @@ static void irdma_set_flush_fields(struct irdma_sc_qp *qp, case IRDMA_AE_LLP_RECEIVED_MPA_CRC_ERROR: qp->flush_code = FLUSH_GENERAL_ERR; break; + case IRDMA_AE_LLP_TOO_MANY_RETRIES: + qp->flush_code = FLUSH_RETRY_EXC_ERR; + break; default: qp->flush_code = FLUSH_FATAL_ERR; break; diff --git a/drivers/infiniband/hw/irdma/user.h b/drivers/infiniband/hw/irdma/user.h index ff705f323233..267102d1049d 100644 --- a/drivers/infiniband/hw/irdma/user.h +++ b/drivers/infiniband/hw/irdma/user.h @@ -102,6 +102,7 @@ enum irdma_flush_opcode { FLUSH_REM_OP_ERR, FLUSH_LOC_LEN_ERR, FLUSH_FATAL_ERR, + FLUSH_RETRY_EXC_ERR, }; enum irdma_cmpl_status { diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index 23c47482c749..c7e129ee74d0 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -3352,6 +3352,8 @@ static enum ib_wc_status irdma_flush_err_to_ib_wc_status(enum irdma_flush_opcode return IB_WC_LOC_LEN_ERR; case FLUSH_GENERAL_ERR: return IB_WC_WR_FLUSH_ERR; + case FLUSH_RETRY_EXC_ERR: + return IB_WC_RETRY_EXC_ERR; case FLUSH_FATAL_ERR: default: return IB_WC_FATAL_ERR; -- cgit From 9f7fa37a6bd90f2749c67f8524334c387d972eb9 Mon Sep 17 00:00:00 2001 From: Sindhu Devale Date: Thu, 16 Sep 2021 14:12:22 -0500 Subject: RDMA/irdma: Report correct WC error when there are MW bind errors Report the correct WC error when MW bind error related asynchronous events are generated by HW. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://lore.kernel.org/r/20210916191222.824-5-shiraz.saleem@intel.com Signed-off-by: Sindhu Devale Signed-off-by: Shiraz Saleem Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/irdma/hw.c | 5 +++++ drivers/infiniband/hw/irdma/user.h | 1 + drivers/infiniband/hw/irdma/verbs.c | 2 ++ 3 files changed, 8 insertions(+) diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index cb9a8e24e3b7..7de525a5ccf8 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -179,6 +179,11 @@ static void irdma_set_flush_fields(struct irdma_sc_qp *qp, case IRDMA_AE_LLP_TOO_MANY_RETRIES: qp->flush_code = FLUSH_RETRY_EXC_ERR; break; + case IRDMA_AE_AMP_MWBIND_INVALID_RIGHTS: + case IRDMA_AE_AMP_MWBIND_BIND_DISABLED: + case IRDMA_AE_AMP_MWBIND_INVALID_BOUNDS: + qp->flush_code = FLUSH_MW_BIND_ERR; + break; default: qp->flush_code = FLUSH_FATAL_ERR; break; diff --git a/drivers/infiniband/hw/irdma/user.h b/drivers/infiniband/hw/irdma/user.h index 267102d1049d..3dcbb1fbf2c6 100644 --- a/drivers/infiniband/hw/irdma/user.h +++ b/drivers/infiniband/hw/irdma/user.h @@ -103,6 +103,7 @@ enum irdma_flush_opcode { FLUSH_LOC_LEN_ERR, FLUSH_FATAL_ERR, FLUSH_RETRY_EXC_ERR, + FLUSH_MW_BIND_ERR, }; enum irdma_cmpl_status { diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index c7e129ee74d0..7110ebf834f9 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -3354,6 +3354,8 @@ static enum ib_wc_status irdma_flush_err_to_ib_wc_status(enum irdma_flush_opcode return IB_WC_WR_FLUSH_ERR; case FLUSH_RETRY_EXC_ERR: return IB_WC_RETRY_EXC_ERR; + case FLUSH_MW_BIND_ERR: + return IB_WC_MW_BIND_ERR; case FLUSH_FATAL_ERR: default: return IB_WC_FATAL_ERR; -- cgit From d8b1e10a2b8efaf71d151aa756052fbf2f3b6d57 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 20 Sep 2021 10:56:32 -0700 Subject: sparc64: fix pci_iounmap() when CONFIG_PCI is not set Guenter reported [1] that the pci_iounmap() changes remain problematic, with sparc64 allnoconfig and tinyconfig still not building due to the header file changes and confusion with the arch-specific pci_iounmap() implementation. I'm pretty convinced that sparc should just use GENERIC_IOMAP instead of doing its own thing, since it turns out that the sparc64 version of pci_iounmap() is somewhat buggy (see [2]). But in the meantime, this just fixes the build by avoiding the trivial re-definition of the empty case. Link: https://lore.kernel.org/lkml/20210920134424.GA346531@roeck-us.net/ [1] Link: https://lore.kernel.org/lkml/CAHk-=wgheheFx9myQyy5osh79BAazvmvYURAtub2gQtMvLrhqQ@mail.gmail.com/ [2] Reported-by: Guenter Roeck Cc: David Miller Signed-off-by: Linus Torvalds --- arch/sparc/lib/iomap.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sparc/lib/iomap.c b/arch/sparc/lib/iomap.c index c9da9f139694..f3a8cd491ce0 100644 --- a/arch/sparc/lib/iomap.c +++ b/arch/sparc/lib/iomap.c @@ -19,8 +19,10 @@ void ioport_unmap(void __iomem *addr) EXPORT_SYMBOL(ioport_map); EXPORT_SYMBOL(ioport_unmap); +#ifdef CONFIG_PCI void pci_iounmap(struct pci_dev *dev, void __iomem * addr) { /* nothing to do */ } EXPORT_SYMBOL(pci_iounmap); +#endif -- cgit From e8f71f89236ef82d449991bfbc237e3cb6ea584f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 8 Sep 2021 12:08:17 -0700 Subject: drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV nvkm test builds fail with the following error. drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info': drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5' The code builds on most architectures, but fails on parisc where ENOSYS is defined as 251. Replace the error code with -ENODEV (-19). The actual error code does not really matter and is not passed to userspace - it just has to be negative. Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs") Signed-off-by: Guenter Roeck Cc: Ben Skeggs Cc: David Airlie Cc: Daniel Vetter Signed-off-by: Linus Torvalds --- drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c index b0ece71aefde..ce774579c89d 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c @@ -57,7 +57,7 @@ nvkm_control_mthd_pstate_info(struct nvkm_control *ctrl, void *data, u32 size) args->v0.count = 0; args->v0.ustate_ac = NVIF_CONTROL_PSTATE_INFO_V0_USTATE_DISABLE; args->v0.ustate_dc = NVIF_CONTROL_PSTATE_INFO_V0_USTATE_DISABLE; - args->v0.pwrsrc = -ENOSYS; + args->v0.pwrsrc = -ENODEV; args->v0.pstate = NVIF_CONTROL_PSTATE_INFO_V0_PSTATE_UNKNOWN; } -- cgit From d4ffd5df9d18031b6a53f934388726775b4452d3 Mon Sep 17 00:00:00 2001 From: Jiashuo Liang Date: Fri, 30 Jul 2021 11:01:52 +0800 Subject: x86/fault: Fix wrong signal when vsyscall fails with pkey The function __bad_area_nosemaphore() calls kernelmode_fixup_or_oops() with the parameter @signal being actually @pkey, which will send a signal numbered with the argument in @pkey. This bug can be triggered when the kernel fails to access user-given memory pages that are protected by a pkey, so it can go down the do_user_addr_fault() path and pass the !user_mode() check in __bad_area_nosemaphore(). Most cases will simply run the kernel fixup code to make an -EFAULT. But when another condition current->thread.sig_on_uaccess_err is met, which is only used to emulate vsyscall, the kernel will generate the wrong signal. Add a new parameter @pkey to kernelmode_fixup_or_oops() to fix this. [ bp: Massage commit message, fix build error as reported by the 0day bot: https://lkml.kernel.org/r/202109202245.APvuT8BX-lkp@intel.com ] Fixes: 5042d40a264c ("x86/fault: Bypass no_context() for implicit kernel faults from usermode") Reported-by: kernel test robot Signed-off-by: Jiashuo Liang Signed-off-by: Borislav Petkov Acked-by: Dave Hansen Link: https://lkml.kernel.org/r/20210730030152.249106-1-liangjs@pku.edu.cn --- arch/x86/include/asm/pkeys.h | 2 -- arch/x86/mm/fault.c | 26 ++++++++++++++++++-------- include/linux/pkeys.h | 2 ++ 3 files changed, 20 insertions(+), 10 deletions(-) diff --git a/arch/x86/include/asm/pkeys.h b/arch/x86/include/asm/pkeys.h index 5c7bcaa79623..1d5f14aff5f6 100644 --- a/arch/x86/include/asm/pkeys.h +++ b/arch/x86/include/asm/pkeys.h @@ -2,8 +2,6 @@ #ifndef _ASM_X86_PKEYS_H #define _ASM_X86_PKEYS_H -#define ARCH_DEFAULT_PKEY 0 - /* * If more than 16 keys are ever supported, a thorough audit * will be necessary to ensure that the types that store key diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index b2eefdefc108..84a2c8c4af73 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -710,7 +710,8 @@ oops: static noinline void kernelmode_fixup_or_oops(struct pt_regs *regs, unsigned long error_code, - unsigned long address, int signal, int si_code) + unsigned long address, int signal, int si_code, + u32 pkey) { WARN_ON_ONCE(user_mode(regs)); @@ -735,8 +736,12 @@ kernelmode_fixup_or_oops(struct pt_regs *regs, unsigned long error_code, set_signal_archinfo(address, error_code); - /* XXX: hwpoison faults will set the wrong code. */ - force_sig_fault(signal, si_code, (void __user *)address); + if (si_code == SEGV_PKUERR) { + force_sig_pkuerr((void __user *)address, pkey); + } else { + /* XXX: hwpoison faults will set the wrong code. */ + force_sig_fault(signal, si_code, (void __user *)address); + } } /* @@ -798,7 +803,8 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code, struct task_struct *tsk = current; if (!user_mode(regs)) { - kernelmode_fixup_or_oops(regs, error_code, address, pkey, si_code); + kernelmode_fixup_or_oops(regs, error_code, address, + SIGSEGV, si_code, pkey); return; } @@ -930,7 +936,8 @@ do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address, { /* Kernel mode? Handle exceptions or die: */ if (!user_mode(regs)) { - kernelmode_fixup_or_oops(regs, error_code, address, SIGBUS, BUS_ADRERR); + kernelmode_fixup_or_oops(regs, error_code, address, + SIGBUS, BUS_ADRERR, ARCH_DEFAULT_PKEY); return; } @@ -1396,7 +1403,8 @@ good_area: */ if (!user_mode(regs)) kernelmode_fixup_or_oops(regs, error_code, address, - SIGBUS, BUS_ADRERR); + SIGBUS, BUS_ADRERR, + ARCH_DEFAULT_PKEY); return; } @@ -1416,7 +1424,8 @@ good_area: return; if (fatal_signal_pending(current) && !user_mode(regs)) { - kernelmode_fixup_or_oops(regs, error_code, address, 0, 0); + kernelmode_fixup_or_oops(regs, error_code, address, + 0, 0, ARCH_DEFAULT_PKEY); return; } @@ -1424,7 +1433,8 @@ good_area: /* Kernel mode? Handle exceptions or die: */ if (!user_mode(regs)) { kernelmode_fixup_or_oops(regs, error_code, address, - SIGSEGV, SEGV_MAPERR); + SIGSEGV, SEGV_MAPERR, + ARCH_DEFAULT_PKEY); return; } diff --git a/include/linux/pkeys.h b/include/linux/pkeys.h index 6beb26b7151d..86be8bf27b41 100644 --- a/include/linux/pkeys.h +++ b/include/linux/pkeys.h @@ -4,6 +4,8 @@ #include +#define ARCH_DEFAULT_PKEY 0 + #ifdef CONFIG_ARCH_HAS_PKEYS #include #else /* ! CONFIG_ARCH_HAS_PKEYS */ -- cgit From c9c3b6811f7429b8c292de5774cea67f3a033eb2 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 8 Sep 2021 14:28:35 +0200 Subject: netfilter: conntrack: make max chain length random Similar to commit 67d6d681e15b ("ipv4: make exception cache less predictible"): Use a random drop length to make it harder to detect when entries were hashed to same bucket list. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 94e18fb9690d..91b7edaa635c 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -77,7 +77,8 @@ static __read_mostly bool nf_conntrack_locks_all; #define GC_SCAN_INTERVAL (120u * HZ) #define GC_SCAN_MAX_DURATION msecs_to_jiffies(10) -#define MAX_CHAINLEN 64u +#define MIN_CHAINLEN 8u +#define MAX_CHAINLEN (32u - MIN_CHAINLEN) static struct conntrack_gc_work conntrack_gc_work; @@ -842,6 +843,7 @@ nf_conntrack_hash_check_insert(struct nf_conn *ct) unsigned int hash, reply_hash; struct nf_conntrack_tuple_hash *h; struct hlist_nulls_node *n; + unsigned int max_chainlen; unsigned int chainlen = 0; unsigned int sequence; int err = -EEXIST; @@ -857,13 +859,15 @@ nf_conntrack_hash_check_insert(struct nf_conn *ct) &ct->tuplehash[IP_CT_DIR_REPLY].tuple); } while (nf_conntrack_double_lock(net, hash, reply_hash, sequence)); + max_chainlen = MIN_CHAINLEN + prandom_u32_max(MAX_CHAINLEN); + /* See if there's one in the list already, including reverse */ hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[hash], hnnode) { if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, zone, net)) goto out; - if (chainlen++ > MAX_CHAINLEN) + if (chainlen++ > max_chainlen) goto chaintoolong; } @@ -873,7 +877,7 @@ nf_conntrack_hash_check_insert(struct nf_conn *ct) if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_REPLY].tuple, zone, net)) goto out; - if (chainlen++ > MAX_CHAINLEN) + if (chainlen++ > max_chainlen) goto chaintoolong; } @@ -1103,8 +1107,8 @@ drop: int __nf_conntrack_confirm(struct sk_buff *skb) { + unsigned int chainlen = 0, sequence, max_chainlen; const struct nf_conntrack_zone *zone; - unsigned int chainlen = 0, sequence; unsigned int hash, reply_hash; struct nf_conntrack_tuple_hash *h; struct nf_conn *ct; @@ -1168,6 +1172,7 @@ __nf_conntrack_confirm(struct sk_buff *skb) goto dying; } + max_chainlen = MIN_CHAINLEN + prandom_u32_max(MAX_CHAINLEN); /* See if there's one in the list already, including reverse: NAT could have grabbed it without realizing, since we're not in the hash. If there is, we lost race. */ @@ -1175,7 +1180,7 @@ __nf_conntrack_confirm(struct sk_buff *skb) if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, zone, net)) goto out; - if (chainlen++ > MAX_CHAINLEN) + if (chainlen++ > max_chainlen) goto chaintoolong; } @@ -1184,7 +1189,7 @@ __nf_conntrack_confirm(struct sk_buff *skb) if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_REPLY].tuple, zone, net)) goto out; - if (chainlen++ > MAX_CHAINLEN) { + if (chainlen++ > max_chainlen) { chaintoolong: nf_ct_add_to_dying_list(ct); NF_CT_STAT_INC(net, chaintoolong); -- cgit From b16ac3c4c886f323b06ae942f02ebd2a70bf8840 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 8 Sep 2021 14:28:36 +0200 Subject: netfilter: conntrack: include zone id in tuple hash again commit deedb59039f111 ("netfilter: nf_conntrack: add direction support for zones") removed the zone id from the hash value. This has implications on hash chain lengths with overlapping tuples, which can hit 64k entries on released kernels, before upper droplimit was added in d7e7747ac5c ("netfilter: refuse insertion if chain has grown too large"). With that change reverted, test script coming with this series shows linear insertion time growth: 10000 entries in 3737 ms (now 10000 total, loop 1) 10000 entries in 16994 ms (now 20000 total, loop 2) 10000 entries in 47787 ms (now 30000 total, loop 3) 10000 entries in 72731 ms (now 40000 total, loop 4) 10000 entries in 95761 ms (now 50000 total, loop 5) 10000 entries in 96809 ms (now 60000 total, loop 6) inserted 60000 entries from packet path in 333825 ms With d7e7747ac5c in place, the test fails. There are three supported zone use cases: 1. Connection is in the default zone (zone 0). This means to special config (the default). 2. Connection is in a different zone (1 to 2**16). This means rules are in place to put packets in the desired zone, e.g. derived from vlan id or interface. 3. Original direction is in zone X and Reply is in zone 0. 3) allows to use of the existing NAT port collision avoidance to provide connectivity to internet/wan even when the various zones have overlapping source networks separated via policy routing. In case the original zone is 0 all three cases are identical. There is no way to place original direction in zone x and reply in zone y (with y != 0). Zones need to be assigned manually via the iptables/nftables ruleset, before conntrack lookup occurs (raw table in iptables) using the "CT" target conntrack template support (-j CT --{zone,zone-orig,zone-reply} X). Normally zone assignment happens based on incoming interface, but could also be derived from packet mark, vlan id and so on. This means that when case 3 is used, the ruleset will typically not even assign a connection tracking template to the "reply" packets, so lookup happens in zone 0. However, it is possible that reply packets also match a ct zone assignment rule which sets up a template for zone X (X > 0) in original direction only. Therefore, after making the zone id part of the hash, we need to do a second lookup using the reply zone id if we did not find an entry on the first lookup. In practice, most deployments will either not use zones at all or the origin and reply zones are the same, no second lookup is required in either case. After this change, packet path insertion test passes with constant insertion times: 10000 entries in 1064 ms (now 10000 total, loop 1) 10000 entries in 1074 ms (now 20000 total, loop 2) 10000 entries in 1066 ms (now 30000 total, loop 3) 10000 entries in 1079 ms (now 40000 total, loop 4) 10000 entries in 1081 ms (now 50000 total, loop 5) 10000 entries in 1082 ms (now 60000 total, loop 6) inserted 60000 entries from packet path in 6452 ms Cc: Daniel Borkmann Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 67 ++++++++++++++++++++++++++++++--------- 1 file changed, 52 insertions(+), 15 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 91b7edaa635c..97b91d62589d 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -189,11 +189,13 @@ seqcount_spinlock_t nf_conntrack_generation __read_mostly; static siphash_key_t nf_conntrack_hash_rnd __read_mostly; static u32 hash_conntrack_raw(const struct nf_conntrack_tuple *tuple, + unsigned int zoneid, const struct net *net) { struct { struct nf_conntrack_man src; union nf_inet_addr dst_addr; + unsigned int zone; u32 net_mix; u16 dport; u16 proto; @@ -206,6 +208,7 @@ static u32 hash_conntrack_raw(const struct nf_conntrack_tuple *tuple, /* The direction must be ignored, so handle usable members manually. */ combined.src = tuple->src; combined.dst_addr = tuple->dst.u3; + combined.zone = zoneid; combined.net_mix = net_hash_mix(net); combined.dport = (__force __u16)tuple->dst.u.all; combined.proto = tuple->dst.protonum; @@ -220,15 +223,17 @@ static u32 scale_hash(u32 hash) static u32 __hash_conntrack(const struct net *net, const struct nf_conntrack_tuple *tuple, + unsigned int zoneid, unsigned int size) { - return reciprocal_scale(hash_conntrack_raw(tuple, net), size); + return reciprocal_scale(hash_conntrack_raw(tuple, zoneid, net), size); } static u32 hash_conntrack(const struct net *net, - const struct nf_conntrack_tuple *tuple) + const struct nf_conntrack_tuple *tuple, + unsigned int zoneid) { - return scale_hash(hash_conntrack_raw(tuple, net)); + return scale_hash(hash_conntrack_raw(tuple, zoneid, net)); } static bool nf_ct_get_tuple_ports(const struct sk_buff *skb, @@ -651,9 +656,11 @@ static void nf_ct_delete_from_lists(struct nf_conn *ct) do { sequence = read_seqcount_begin(&nf_conntrack_generation); hash = hash_conntrack(net, - &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, + nf_ct_zone_id(nf_ct_zone(ct), IP_CT_DIR_ORIGINAL)); reply_hash = hash_conntrack(net, - &ct->tuplehash[IP_CT_DIR_REPLY].tuple); + &ct->tuplehash[IP_CT_DIR_REPLY].tuple, + nf_ct_zone_id(nf_ct_zone(ct), IP_CT_DIR_REPLY)); } while (nf_conntrack_double_lock(net, hash, reply_hash, sequence)); clean_from_lists(ct); @@ -820,8 +827,20 @@ struct nf_conntrack_tuple_hash * nf_conntrack_find_get(struct net *net, const struct nf_conntrack_zone *zone, const struct nf_conntrack_tuple *tuple) { - return __nf_conntrack_find_get(net, zone, tuple, - hash_conntrack_raw(tuple, net)); + unsigned int rid, zone_id = nf_ct_zone_id(zone, IP_CT_DIR_ORIGINAL); + struct nf_conntrack_tuple_hash *thash; + + thash = __nf_conntrack_find_get(net, zone, tuple, + hash_conntrack_raw(tuple, zone_id, net)); + + if (thash) + return thash; + + rid = nf_ct_zone_id(zone, IP_CT_DIR_REPLY); + if (rid != zone_id) + return __nf_conntrack_find_get(net, zone, tuple, + hash_conntrack_raw(tuple, rid, net)); + return thash; } EXPORT_SYMBOL_GPL(nf_conntrack_find_get); @@ -854,9 +873,11 @@ nf_conntrack_hash_check_insert(struct nf_conn *ct) do { sequence = read_seqcount_begin(&nf_conntrack_generation); hash = hash_conntrack(net, - &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, + nf_ct_zone_id(nf_ct_zone(ct), IP_CT_DIR_ORIGINAL)); reply_hash = hash_conntrack(net, - &ct->tuplehash[IP_CT_DIR_REPLY].tuple); + &ct->tuplehash[IP_CT_DIR_REPLY].tuple, + nf_ct_zone_id(nf_ct_zone(ct), IP_CT_DIR_REPLY)); } while (nf_conntrack_double_lock(net, hash, reply_hash, sequence)); max_chainlen = MIN_CHAINLEN + prandom_u32_max(MAX_CHAINLEN); @@ -1137,8 +1158,8 @@ __nf_conntrack_confirm(struct sk_buff *skb) hash = *(unsigned long *)&ct->tuplehash[IP_CT_DIR_REPLY].hnnode.pprev; hash = scale_hash(hash); reply_hash = hash_conntrack(net, - &ct->tuplehash[IP_CT_DIR_REPLY].tuple); - + &ct->tuplehash[IP_CT_DIR_REPLY].tuple, + nf_ct_zone_id(nf_ct_zone(ct), IP_CT_DIR_REPLY)); } while (nf_conntrack_double_lock(net, hash, reply_hash, sequence)); /* We're not in hash table, and we refuse to set up related @@ -1251,7 +1272,7 @@ nf_conntrack_tuple_taken(const struct nf_conntrack_tuple *tuple, rcu_read_lock(); begin: nf_conntrack_get_ht(&ct_hash, &hsize); - hash = __hash_conntrack(net, tuple, hsize); + hash = __hash_conntrack(net, tuple, nf_ct_zone_id(zone, IP_CT_DIR_REPLY), hsize); hlist_nulls_for_each_entry_rcu(h, n, &ct_hash[hash], hnnode) { ct = nf_ct_tuplehash_to_ctrack(h); @@ -1692,8 +1713,8 @@ resolve_normal_ct(struct nf_conn *tmpl, struct nf_conntrack_tuple_hash *h; enum ip_conntrack_info ctinfo; struct nf_conntrack_zone tmp; + u32 hash, zone_id, rid; struct nf_conn *ct; - u32 hash; if (!nf_ct_get_tuple(skb, skb_network_offset(skb), dataoff, state->pf, protonum, state->net, @@ -1704,8 +1725,20 @@ resolve_normal_ct(struct nf_conn *tmpl, /* look for tuple match */ zone = nf_ct_zone_tmpl(tmpl, skb, &tmp); - hash = hash_conntrack_raw(&tuple, state->net); + + zone_id = nf_ct_zone_id(zone, IP_CT_DIR_ORIGINAL); + hash = hash_conntrack_raw(&tuple, zone_id, state->net); h = __nf_conntrack_find_get(state->net, zone, &tuple, hash); + + if (!h) { + rid = nf_ct_zone_id(zone, IP_CT_DIR_REPLY); + if (zone_id != rid) { + u32 tmp = hash_conntrack_raw(&tuple, rid, state->net); + + h = __nf_conntrack_find_get(state->net, zone, &tuple, tmp); + } + } + if (!h) { h = init_conntrack(state->net, tmpl, &tuple, skb, dataoff, hash); @@ -2542,12 +2575,16 @@ int nf_conntrack_hash_resize(unsigned int hashsize) for (i = 0; i < nf_conntrack_htable_size; i++) { while (!hlist_nulls_empty(&nf_conntrack_hash[i])) { + unsigned int zone_id; + h = hlist_nulls_entry(nf_conntrack_hash[i].first, struct nf_conntrack_tuple_hash, hnnode); ct = nf_ct_tuplehash_to_ctrack(h); hlist_nulls_del_rcu(&h->hnnode); + + zone_id = nf_ct_zone_id(nf_ct_zone(ct), NF_CT_DIRECTION(h)); bucket = __hash_conntrack(nf_ct_net(ct), - &h->tuple, hashsize); + &h->tuple, zone_id, hashsize); hlist_nulls_add_head_rcu(&h->hnnode, &hash[bucket]); } } -- cgit From d2966dc77ba7b2678f7aee97bf9a65702ec8e2b6 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 8 Sep 2021 14:28:37 +0200 Subject: netfilter: nat: include zone id in nat table hash again Similar to the conntrack change, also use the zone id for the nat source lists if the zone id is valid in both directions. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_nat_core.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/net/netfilter/nf_nat_core.c b/net/netfilter/nf_nat_core.c index 7008961f5cb0..273117683922 100644 --- a/net/netfilter/nf_nat_core.c +++ b/net/netfilter/nf_nat_core.c @@ -150,13 +150,16 @@ static void __nf_nat_decode_session(struct sk_buff *skb, struct flowi *fl) /* We keep an extra hash for each conntrack, for fast searching. */ static unsigned int -hash_by_src(const struct net *n, const struct nf_conntrack_tuple *tuple) +hash_by_src(const struct net *net, + const struct nf_conntrack_zone *zone, + const struct nf_conntrack_tuple *tuple) { unsigned int hash; struct { struct nf_conntrack_man src; u32 net_mix; u32 protonum; + u32 zone; } __aligned(SIPHASH_ALIGNMENT) combined; get_random_once(&nf_nat_hash_rnd, sizeof(nf_nat_hash_rnd)); @@ -165,9 +168,13 @@ hash_by_src(const struct net *n, const struct nf_conntrack_tuple *tuple) /* Original src, to ensure we map it consistently if poss. */ combined.src = tuple->src; - combined.net_mix = net_hash_mix(n); + combined.net_mix = net_hash_mix(net); combined.protonum = tuple->dst.protonum; + /* Zone ID can be used provided its valid for both directions */ + if (zone->dir == NF_CT_DEFAULT_ZONE_DIR) + combined.zone = zone->id; + hash = siphash(&combined, sizeof(combined), &nf_nat_hash_rnd); return reciprocal_scale(hash, nf_nat_htable_size); @@ -272,7 +279,7 @@ find_appropriate_src(struct net *net, struct nf_conntrack_tuple *result, const struct nf_nat_range2 *range) { - unsigned int h = hash_by_src(net, tuple); + unsigned int h = hash_by_src(net, zone, tuple); const struct nf_conn *ct; hlist_for_each_entry_rcu(ct, &nf_nat_bysource[h], nat_bysource) { @@ -619,7 +626,7 @@ nf_nat_setup_info(struct nf_conn *ct, unsigned int srchash; spinlock_t *lock; - srchash = hash_by_src(net, + srchash = hash_by_src(net, nf_ct_zone(ct), &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); lock = &nf_nat_locks[srchash % CONNTRACK_LOCKS]; spin_lock_bh(lock); @@ -788,7 +795,7 @@ static void __nf_nat_cleanup_conntrack(struct nf_conn *ct) { unsigned int h; - h = hash_by_src(nf_ct_net(ct), &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + h = hash_by_src(nf_ct_net(ct), nf_ct_zone(ct), &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); spin_lock_bh(&nf_nat_locks[h % CONNTRACK_LOCKS]); hlist_del_rcu(&ct->nat_bysource); spin_unlock_bh(&nf_nat_locks[h % CONNTRACK_LOCKS]); -- cgit From 0f1148abb226f3639845738cdf3d2534ceb1d059 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 8 Sep 2021 14:28:38 +0200 Subject: selftests: netfilter: add selftest for directional zone support Add a script to exercise NAT port clash resolution with directional zones. Add net namespaces that use the same IP address and connect them to a gateway. Gateway uses policy routing based on iif/mark and conntrack zones to isolate the client namespaces. In server direction, same zone with NAT to single address is used. Then, connect to a server from each client netns, using identical connection id, i.e. saddr:sport -> daddr:dport. Expectation is for all connections to succeeed: NAT gatway is supposed to do port reallocation for each of the (clashing) connections. This is based on the description/use case provided in the commit message of deedb59039f111 ("netfilter: nf_conntrack: add direction support for zones"). Cc: Daniel Borkmann Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/nft_nat_zones.sh | 309 +++++++++++++++++++++ 1 file changed, 309 insertions(+) create mode 100755 tools/testing/selftests/netfilter/nft_nat_zones.sh diff --git a/tools/testing/selftests/netfilter/nft_nat_zones.sh b/tools/testing/selftests/netfilter/nft_nat_zones.sh new file mode 100755 index 000000000000..b9ab37380f33 --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_nat_zones.sh @@ -0,0 +1,309 @@ +#!/bin/bash +# +# Test connection tracking zone and NAT source port reallocation support. +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +# Don't increase too much, 2000 clients should work +# just fine but script can then take several minutes with +# KASAN/debug builds. +maxclients=100 + +have_iperf=1 +ret=0 + +# client1---. +# veth1-. +# | +# NAT Gateway --veth0--> Server +# | | +# veth2-' | +# client2---' | +# .... | +# clientX----vethX---' + +# All clients share identical IP address. +# NAT Gateway uses policy routing and conntrack zones to isolate client +# namespaces. Each client connects to Server, each with colliding tuples: +# clientsaddr:10000 -> serveraddr:dport +# NAT Gateway is supposed to do port reallocation for each of the +# connections. + +sfx=$(mktemp -u "XXXXXXXX") +gw="ns-gw-$sfx" +cl1="ns-cl1-$sfx" +cl2="ns-cl2-$sfx" +srv="ns-srv-$sfx" + +v4gc1=$(sysctl -n net.ipv4.neigh.default.gc_thresh1 2>/dev/null) +v4gc2=$(sysctl -n net.ipv4.neigh.default.gc_thresh2 2>/dev/null) +v4gc3=$(sysctl -n net.ipv4.neigh.default.gc_thresh3 2>/dev/null) +v6gc1=$(sysctl -n net.ipv6.neigh.default.gc_thresh1 2>/dev/null) +v6gc2=$(sysctl -n net.ipv6.neigh.default.gc_thresh2 2>/dev/null) +v6gc3=$(sysctl -n net.ipv6.neigh.default.gc_thresh3 2>/dev/null) + +cleanup() +{ + ip netns del $gw + ip netns del $srv + for i in $(seq 1 $maxclients); do + ip netns del ns-cl$i-$sfx 2>/dev/null + done + + sysctl -q net.ipv4.neigh.default.gc_thresh1=$v4gc1 2>/dev/null + sysctl -q net.ipv4.neigh.default.gc_thresh2=$v4gc2 2>/dev/null + sysctl -q net.ipv4.neigh.default.gc_thresh3=$v4gc3 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh1=$v6gc1 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh2=$v6gc2 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh3=$v6gc3 2>/dev/null +} + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +conntrack -V > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without conntrack tool" + exit $ksft_skip +fi + +iperf3 -v >/dev/null 2>&1 +if [ $? -ne 0 ];then + have_iperf=0 +fi + +ip netns add "$gw" +if [ $? -ne 0 ];then + echo "SKIP: Could not create net namespace $gw" + exit $ksft_skip +fi +ip -net "$gw" link set lo up + +trap cleanup EXIT + +ip netns add "$srv" +if [ $? -ne 0 ];then + echo "SKIP: Could not create server netns $srv" + exit $ksft_skip +fi + +ip link add veth0 netns "$gw" type veth peer name eth0 netns "$srv" +ip -net "$gw" link set veth0 up +ip -net "$srv" link set lo up +ip -net "$srv" link set eth0 up + +sysctl -q net.ipv6.neigh.default.gc_thresh1=512 2>/dev/null +sysctl -q net.ipv6.neigh.default.gc_thresh2=1024 2>/dev/null +sysctl -q net.ipv6.neigh.default.gc_thresh3=4096 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh1=512 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh2=1024 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh3=4096 2>/dev/null + +for i in $(seq 1 $maxclients);do + cl="ns-cl$i-$sfx" + + ip netns add "$cl" + if [ $? -ne 0 ];then + echo "SKIP: Could not create client netns $cl" + exit $ksft_skip + fi + ip link add veth$i netns "$gw" type veth peer name eth0 netns "$cl" > /dev/null 2>&1 + if [ $? -ne 0 ];then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip + fi +done + +for i in $(seq 1 $maxclients);do + cl="ns-cl$i-$sfx" + echo netns exec "$cl" ip link set lo up + echo netns exec "$cl" ip link set eth0 up + echo netns exec "$cl" sysctl -q net.ipv4.tcp_syn_retries=2 + echo netns exec "$gw" ip link set veth$i up + echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.arp_ignore=2 + echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.rp_filter=0 + + # clients have same IP addresses. + echo netns exec "$cl" ip addr add 10.1.0.3/24 dev eth0 + echo netns exec "$cl" ip addr add dead:1::3/64 dev eth0 + echo netns exec "$cl" ip route add default via 10.1.0.2 dev eth0 + echo netns exec "$cl" ip route add default via dead:1::2 dev eth0 + + # NB: same addresses on client-facing interfaces. + echo netns exec "$gw" ip addr add 10.1.0.2/24 dev veth$i + echo netns exec "$gw" ip addr add dead:1::2/64 dev veth$i + + # gw: policy routing + echo netns exec "$gw" ip route add 10.1.0.0/24 dev veth$i table $((1000+i)) + echo netns exec "$gw" ip route add dead:1::0/64 dev veth$i table $((1000+i)) + echo netns exec "$gw" ip route add 10.3.0.0/24 dev veth0 table $((1000+i)) + echo netns exec "$gw" ip route add dead:3::0/64 dev veth0 table $((1000+i)) + echo netns exec "$gw" ip rule add fwmark $i lookup $((1000+i)) +done | ip -batch /dev/stdin + +ip -net "$gw" addr add 10.3.0.1/24 dev veth0 +ip -net "$gw" addr add dead:3::1/64 dev veth0 + +ip -net "$srv" addr add 10.3.0.99/24 dev eth0 +ip -net "$srv" addr add dead:3::99/64 dev eth0 + +ip netns exec $gw nft -f /dev/stdin< /dev/null +ip netns exec "$gw" sysctl -q net.ipv6.conf.all.forwarding=1 > /dev/null +ip netns exec "$gw" sysctl -q net.ipv4.conf.all.rp_filter=0 >/dev/null + +# useful for debugging: allows to use 'ping' from clients to gateway. +ip netns exec "$gw" sysctl -q net.ipv4.fwmark_reflect=1 > /dev/null +ip netns exec "$gw" sysctl -q net.ipv6.fwmark_reflect=1 > /dev/null + +for i in $(seq 1 $maxclients); do + cl="ns-cl$i-$sfx" + ip netns exec $cl ping -i 0.5 -q -c 3 10.3.0.99 > /dev/null 2>&1 & + if [ $? -ne 0 ]; then + echo FAIL: Ping failure from $cl 1>&2 + ret=1 + break + fi +done + +wait + +for i in $(seq 1 $maxclients); do + ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" | grep -q "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 counter packets 3 bytes 252 }" + if [ $? -ne 0 ];then + ret=1 + echo "FAIL: counter icmp mismatch for veth$i" 1>&2 + ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" 1>&2 + break + fi +done + +ip netns exec $gw nft get element inet raw inicmp "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 }" | grep -q "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }" +if [ $? -ne 0 ];then + ret=1 + echo "FAIL: counter icmp mismatch for veth0: { 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }" + ip netns exec $gw nft get element inet raw inicmp "{ 10.3.99 . \"veth0\" . 10.3.0.1 }" 1>&2 +fi + +if [ $ret -eq 0 ]; then + echo "PASS: ping test from all $maxclients namespaces" +fi + +if [ $have_iperf -eq 0 ];then + echo "SKIP: iperf3 not installed" + if [ $ret -ne 0 ];then + exit $ret + fi + exit $ksft_skip +fi + +ip netns exec $srv iperf3 -s > /dev/null 2>&1 & +iperfpid=$! +sleep 1 + +for i in $(seq 1 $maxclients); do + if [ $ret -ne 0 ]; then + break + fi + cl="ns-cl$i-$sfx" + ip netns exec $cl iperf3 -c 10.3.0.99 --cport 10000 -n 1 > /dev/null + if [ $? -ne 0 ]; then + echo FAIL: Failure to connect for $cl 1>&2 + ip netns exec $gw conntrack -S 1>&2 + ret=1 + fi +done +if [ $ret -eq 0 ];then + echo "PASS: iperf3 connections for all $maxclients net namespaces" +fi + +kill $iperfpid +wait + +for i in $(seq 1 $maxclients); do + ip netns exec $gw nft get element inet raw inflows "{ 10.1.0.3 . 10000 . \"veth$i\" . 10.3.0.99 . 5201 }" > /dev/null + if [ $? -ne 0 ];then + ret=1 + echo "FAIL: can't find expected tcp entry for veth$i" 1>&2 + break + fi +done +if [ $ret -eq 0 ];then + echo "PASS: Found client connection for all $maxclients net namespaces" +fi + +ip netns exec $gw nft get element inet raw inflows "{ 10.3.0.99 . 5201 . \"veth0\" . 10.3.0.1 . 10000 }" > /dev/null +if [ $? -ne 0 ];then + ret=1 + echo "FAIL: cannot find return entry on veth0" 1>&2 +fi + +exit $ret -- cgit From cb89f63ba662d2b56583f4dd3dd2b7f03b6d6587 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 8 Sep 2021 14:28:39 +0200 Subject: selftests: netfilter: add zone stress test with colliding tuples Add 20k entries to the connection tracking table, once from the data plane, once via ctnetlink. In both cases, each entry lives in a different conntrack zone and addresses/ports are identical. Expectation is that insertions work and occurs in constant time: PASS: added 10000 entries in 1215 ms (now 10000 total, loop 1) PASS: added 10000 entries in 1214 ms (now 20000 total, loop 2) PASS: inserted 20000 entries from packet path in 2434 ms total PASS: added 10000 entries in 57631 ms (now 10000 total) PASS: added 10000 entries in 58572 ms (now 20000 total) PASS: inserted 20000 entries via ctnetlink in 116205 ms Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- .../testing/selftests/netfilter/nft_zones_many.sh | 156 +++++++++++++++++++++ 1 file changed, 156 insertions(+) create mode 100755 tools/testing/selftests/netfilter/nft_zones_many.sh diff --git a/tools/testing/selftests/netfilter/nft_zones_many.sh b/tools/testing/selftests/netfilter/nft_zones_many.sh new file mode 100755 index 000000000000..ac646376eb01 --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_zones_many.sh @@ -0,0 +1,156 @@ +#!/bin/bash + +# Test insertion speed for packets with identical addresses/ports +# that are all placed in distinct conntrack zones. + +sfx=$(mktemp -u "XXXXXXXX") +ns="ns-$sfx" + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +zones=20000 +have_ct_tool=0 +ret=0 + +cleanup() +{ + ip netns del $ns +} + +ip netns add $ns +if [ $? -ne 0 ];then + echo "SKIP: Could not create net namespace $gw" + exit $ksft_skip +fi + +trap cleanup EXIT + +conntrack -V > /dev/null 2>&1 +if [ $? -eq 0 ];then + have_ct_tool=1 +fi + +ip -net "$ns" link set lo up + +test_zones() { + local max_zones=$1 + +ip netns exec $ns sysctl -q net.netfilter.nf_conntrack_udp_timeout=3600 +ip netns exec $ns nft -f /dev/stdin</dev/null | ip netns exec "$ns" nc -w 1 -q 1 -u -p 12345 127.0.0.1 12345 > /dev/null + if [ $? -ne 0 ] ;then + ret=1 + break + fi + + stop=$(date +%s%3N) + local duration=$((stop-start)) + echo "PASS: added 10000 entries in $duration ms (now $i total, loop $j)" + done + + if [ $have_ct_tool -eq 1 ]; then + local count=$(ip netns exec "$ns" conntrack -C) + local duration=$((stop-outerstart)) + + if [ $count -eq $max_zones ]; then + echo "PASS: inserted $count entries from packet path in $duration ms total" + else + ip netns exec $ns conntrack -S 1>&2 + echo "FAIL: inserted $count entries from packet path in $duration ms total, expected $max_zones entries" + ret=1 + fi + fi + + if [ $ret -ne 0 ];then + echo "FAIL: insert $max_zones entries from packet path" 1>&2 + fi +} + +test_conntrack_tool() { + local max_zones=$1 + + ip netns exec $ns conntrack -F >/dev/null 2>/dev/null + + local outerstart=$(date +%s%3N) + local start=$(date +%s%3N) + local stop=$start + local i=0 + while [ $i -lt $max_zones ]; do + i=$((i + 1)) + ip netns exec "$ns" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \ + --timeout 3600 --state ESTABLISHED --sport 12345 --dport 1000 --zone $i >/dev/null 2>&1 + if [ $? -ne 0 ];then + ip netns exec "$ns" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \ + --timeout 3600 --state ESTABLISHED --sport 12345 --dport 1000 --zone $i > /dev/null + echo "FAIL: conntrack -I returned an error" + ret=1 + break + fi + + if [ $((i%10000)) -eq 0 ];then + stop=$(date +%s%3N) + + local duration=$((stop-start)) + echo "PASS: added 10000 entries in $duration ms (now $i total)" + start=$stop + fi + done + + local count=$(ip netns exec "$ns" conntrack -C) + local duration=$((stop-outerstart)) + + if [ $count -eq $max_zones ]; then + echo "PASS: inserted $count entries via ctnetlink in $duration ms" + else + ip netns exec $ns conntrack -S 1>&2 + echo "FAIL: inserted $count entries via ctnetlink in $duration ms, expected $max_zones entries ($duration ms)" + ret=1 + fi +} + +test_zones $zones + +if [ $have_ct_tool -eq 1 ];then + test_conntrack_tool $zones +else + echo "SKIP: Could not run ctnetlink insertion test without conntrack tool" + if [ $ret -eq 0 ];then + exit $ksft_skip + fi +fi + +exit $ret -- cgit From a499b03bf36b0c2e3b958a381d828678ab0ffc5e Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 13 Sep 2021 14:42:33 +0200 Subject: netfilter: nf_tables: unlink table before deleting it syzbot reports following UAF: BUG: KASAN: use-after-free in memcmp+0x18f/0x1c0 lib/string.c:955 nla_strcmp+0xf2/0x130 lib/nlattr.c:836 nft_table_lookup.part.0+0x1a2/0x460 net/netfilter/nf_tables_api.c:570 nft_table_lookup net/netfilter/nf_tables_api.c:4064 [inline] nf_tables_getset+0x1b3/0x860 net/netfilter/nf_tables_api.c:4064 nfnetlink_rcv_msg+0x659/0x13f0 net/netfilter/nfnetlink.c:285 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 Problem is that all get operations are lockless, so the commit_mutex held by nft_rcv_nl_event() isn't enough to stop a parallel GET request from doing read-accesses to the table object even after synchronize_rcu(). To avoid this, unlink the table first and store the table objects in on-stack scratch space. Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership") Reported-and-tested-by: syzbot+f31660cf279b0557160c@syzkaller.appspotmail.com Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 081437dd75b7..33e771cd847c 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -9599,7 +9599,6 @@ static void __nft_release_table(struct net *net, struct nft_table *table) table->use--; nf_tables_chain_destroy(&ctx); } - list_del(&table->list); nf_tables_table_destroy(&ctx); } @@ -9612,6 +9611,8 @@ static void __nft_release_tables(struct net *net) if (nft_table_has_owner(table)) continue; + list_del(&table->list); + __nft_release_table(net, table); } } @@ -9619,31 +9620,38 @@ static void __nft_release_tables(struct net *net) static int nft_rcv_nl_event(struct notifier_block *this, unsigned long event, void *ptr) { + struct nft_table *table, *to_delete[8]; struct nftables_pernet *nft_net; struct netlink_notify *n = ptr; - struct nft_table *table, *nt; struct net *net = n->net; - bool release = false; + unsigned int deleted; + bool restart = false; if (event != NETLINK_URELEASE || n->protocol != NETLINK_NETFILTER) return NOTIFY_DONE; nft_net = nft_pernet(net); + deleted = 0; mutex_lock(&nft_net->commit_mutex); +again: list_for_each_entry(table, &nft_net->tables, list) { if (nft_table_has_owner(table) && n->portid == table->nlpid) { __nft_release_hook(net, table); - release = true; + list_del_rcu(&table->list); + to_delete[deleted++] = table; + if (deleted >= ARRAY_SIZE(to_delete)) + break; } } - if (release) { + if (deleted) { + restart = deleted >= ARRAY_SIZE(to_delete); synchronize_rcu(); - list_for_each_entry_safe(table, nt, &nft_net->tables, list) { - if (nft_table_has_owner(table) && - n->portid == table->nlpid) - __nft_release_table(net, table); - } + while (deleted) + __nft_release_table(net, to_delete[--deleted]); + + if (restart) + goto again; } mutex_unlock(&nft_net->commit_mutex); -- cgit From 45928afe94a094bcda9af858b96673d59bc4a0e9 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 13 Sep 2021 20:38:52 +0200 Subject: netfilter: nf_tables: Fix oversized kvmalloc() calls The commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") limits the max allocatable memory via kvmalloc() to MAX_INT. Reported-by: syzbot+cd43695a64bcd21b8596@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 33e771cd847c..b9546defdc28 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4336,7 +4336,7 @@ static int nf_tables_newset(struct sk_buff *skb, const struct nfnl_info *info, if (ops->privsize != NULL) size = ops->privsize(nla, &desc); alloc_size = sizeof(*set) + size + udlen; - if (alloc_size < size) + if (alloc_size < size || alloc_size > INT_MAX) return -ENOMEM; set = kvzalloc(alloc_size, GFP_KERNEL); if (!set) -- cgit From 30db406923b9285a9bac06a6af5e74bd6d0f1d06 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 15 Sep 2021 16:46:38 +0200 Subject: netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic masq_inet6_event is called asynchronously from system work queue, because the inet6 notifier is atomic and nf_iterate_cleanup can sleep. The ipv4 and device notifiers call nf_iterate_cleanup directly. This is legal, but these notifiers are called with RTNL mutex held. A large conntrack table with many devices coming and going will have severe impact on the system usability, with 'ip a' blocking for several seconds. This change places the defer code into a helper and makes it more generic so ipv4 and ifdown notifiers can be converted to defer the cleanup walk as well in a follow patch. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_nat_masquerade.c | 122 +++++++++++++++++++++++--------------- 1 file changed, 75 insertions(+), 47 deletions(-) diff --git a/net/netfilter/nf_nat_masquerade.c b/net/netfilter/nf_nat_masquerade.c index 8e8a65d46345..415919a6ac1a 100644 --- a/net/netfilter/nf_nat_masquerade.c +++ b/net/netfilter/nf_nat_masquerade.c @@ -9,8 +9,19 @@ #include +struct masq_dev_work { + struct work_struct work; + struct net *net; + union nf_inet_addr addr; + int ifindex; + int (*iter)(struct nf_conn *i, void *data); +}; + +#define MAX_MASQ_WORKER_COUNT 16 + static DEFINE_MUTEX(masq_mutex); static unsigned int masq_refcnt __read_mostly; +static atomic_t masq_worker_count __read_mostly; unsigned int nf_nat_masquerade_ipv4(struct sk_buff *skb, unsigned int hooknum, @@ -63,6 +74,63 @@ nf_nat_masquerade_ipv4(struct sk_buff *skb, unsigned int hooknum, } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv4); +static void iterate_cleanup_work(struct work_struct *work) +{ + struct masq_dev_work *w; + + w = container_of(work, struct masq_dev_work, work); + + nf_ct_iterate_cleanup_net(w->net, w->iter, (void *)w, 0, 0); + + put_net(w->net); + kfree(w); + atomic_dec(&masq_worker_count); + module_put(THIS_MODULE); +} + +/* Iterate conntrack table in the background and remove conntrack entries + * that use the device/address being removed. + * + * In case too many work items have been queued already or memory allocation + * fails iteration is skipped, conntrack entries will time out eventually. + */ +static void nf_nat_masq_schedule(struct net *net, union nf_inet_addr *addr, + int ifindex, + int (*iter)(struct nf_conn *i, void *data), + gfp_t gfp_flags) +{ + struct masq_dev_work *w; + + if (atomic_read(&masq_worker_count) > MAX_MASQ_WORKER_COUNT) + return; + + net = maybe_get_net(net); + if (!net) + return; + + if (!try_module_get(THIS_MODULE)) + goto err_module; + + w = kzalloc(sizeof(*w), gfp_flags); + if (w) { + /* We can overshoot MAX_MASQ_WORKER_COUNT, no big deal */ + atomic_inc(&masq_worker_count); + + INIT_WORK(&w->work, iterate_cleanup_work); + w->ifindex = ifindex; + w->net = net; + w->iter = iter; + if (addr) + w->addr = *addr; + schedule_work(&w->work); + return; + } + + module_put(THIS_MODULE); + err_module: + put_net(net); +} + static int device_cmp(struct nf_conn *i, void *ifindex) { const struct nf_conn_nat *nat = nfct_nat(i); @@ -136,8 +204,6 @@ static struct notifier_block masq_inet_notifier = { }; #if IS_ENABLED(CONFIG_IPV6) -static atomic_t v6_worker_count __read_mostly; - static int nat_ipv6_dev_get_saddr(struct net *net, const struct net_device *dev, const struct in6_addr *daddr, unsigned int srcprefs, @@ -187,13 +253,6 @@ nf_nat_masquerade_ipv6(struct sk_buff *skb, const struct nf_nat_range2 *range, } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6); -struct masq_dev_work { - struct work_struct work; - struct net *net; - struct in6_addr addr; - int ifindex; -}; - static int inet6_cmp(struct nf_conn *ct, void *work) { struct masq_dev_work *w = (struct masq_dev_work *)work; @@ -204,21 +263,7 @@ static int inet6_cmp(struct nf_conn *ct, void *work) tuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple; - return ipv6_addr_equal(&w->addr, &tuple->dst.u3.in6); -} - -static void iterate_cleanup_work(struct work_struct *work) -{ - struct masq_dev_work *w; - - w = container_of(work, struct masq_dev_work, work); - - nf_ct_iterate_cleanup_net(w->net, inet6_cmp, (void *)w, 0, 0); - - put_net(w->net); - kfree(w); - atomic_dec(&v6_worker_count); - module_put(THIS_MODULE); + return nf_inet_addr_cmp(&w->addr, &tuple->dst.u3); } /* atomic notifier; can't call nf_ct_iterate_cleanup_net (it can sleep). @@ -233,36 +278,19 @@ static int masq_inet6_event(struct notifier_block *this, { struct inet6_ifaddr *ifa = ptr; const struct net_device *dev; - struct masq_dev_work *w; - struct net *net; + union nf_inet_addr addr; - if (event != NETDEV_DOWN || atomic_read(&v6_worker_count) >= 16) + if (event != NETDEV_DOWN) return NOTIFY_DONE; dev = ifa->idev->dev; - net = maybe_get_net(dev_net(dev)); - if (!net) - return NOTIFY_DONE; - if (!try_module_get(THIS_MODULE)) - goto err_module; + memset(&addr, 0, sizeof(addr)); - w = kmalloc(sizeof(*w), GFP_ATOMIC); - if (w) { - atomic_inc(&v6_worker_count); + addr.in6 = ifa->addr; - INIT_WORK(&w->work, iterate_cleanup_work); - w->ifindex = dev->ifindex; - w->net = net; - w->addr = ifa->addr; - schedule_work(&w->work); - - return NOTIFY_DONE; - } - - module_put(THIS_MODULE); - err_module: - put_net(net); + nf_nat_masq_schedule(dev_net(dev), &addr, dev->ifindex, inet6_cmp, + GFP_ATOMIC); return NOTIFY_DONE; } -- cgit From 7970a19b71044bf4dc2c1becc200275bdf1884d4 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 15 Sep 2021 16:46:39 +0200 Subject: netfilter: nf_nat_masquerade: defer conntrack walk to work queue The ipv4 and device notifiers are called with RTNL mutex held. The table walk can take some time, better not block other RTNL users. 'ip a' has been reported to block for up to 20 seconds when conntrack table has many entries and device down events are frequent (e.g., PPP). Reported-and-tested-by: Martin Zaharinov Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_nat_masquerade.c | 50 +++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 26 deletions(-) diff --git a/net/netfilter/nf_nat_masquerade.c b/net/netfilter/nf_nat_masquerade.c index 415919a6ac1a..acd73f717a08 100644 --- a/net/netfilter/nf_nat_masquerade.c +++ b/net/netfilter/nf_nat_masquerade.c @@ -131,13 +131,14 @@ static void nf_nat_masq_schedule(struct net *net, union nf_inet_addr *addr, put_net(net); } -static int device_cmp(struct nf_conn *i, void *ifindex) +static int device_cmp(struct nf_conn *i, void *arg) { const struct nf_conn_nat *nat = nfct_nat(i); + const struct masq_dev_work *w = arg; if (!nat) return 0; - return nat->masq_index == (int)(long)ifindex; + return nat->masq_index == w->ifindex; } static int masq_device_event(struct notifier_block *this, @@ -153,8 +154,8 @@ static int masq_device_event(struct notifier_block *this, * and forget them. */ - nf_ct_iterate_cleanup_net(net, device_cmp, - (void *)(long)dev->ifindex, 0, 0); + nf_nat_masq_schedule(net, NULL, dev->ifindex, + device_cmp, GFP_KERNEL); } return NOTIFY_DONE; @@ -162,35 +163,45 @@ static int masq_device_event(struct notifier_block *this, static int inet_cmp(struct nf_conn *ct, void *ptr) { - struct in_ifaddr *ifa = (struct in_ifaddr *)ptr; - struct net_device *dev = ifa->ifa_dev->dev; struct nf_conntrack_tuple *tuple; + struct masq_dev_work *w = ptr; - if (!device_cmp(ct, (void *)(long)dev->ifindex)) + if (!device_cmp(ct, ptr)) return 0; tuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple; - return ifa->ifa_address == tuple->dst.u3.ip; + return nf_inet_addr_cmp(&w->addr, &tuple->dst.u3); } static int masq_inet_event(struct notifier_block *this, unsigned long event, void *ptr) { - struct in_device *idev = ((struct in_ifaddr *)ptr)->ifa_dev; - struct net *net = dev_net(idev->dev); + const struct in_ifaddr *ifa = ptr; + const struct in_device *idev; + const struct net_device *dev; + union nf_inet_addr addr; + + if (event != NETDEV_DOWN) + return NOTIFY_DONE; /* The masq_dev_notifier will catch the case of the device going * down. So if the inetdev is dead and being destroyed we have * no work to do. Otherwise this is an individual address removal * and we have to perform the flush. */ + idev = ifa->ifa_dev; if (idev->dead) return NOTIFY_DONE; - if (event == NETDEV_DOWN) - nf_ct_iterate_cleanup_net(net, inet_cmp, ptr, 0, 0); + memset(&addr, 0, sizeof(addr)); + + addr.ip = ifa->ifa_address; + + dev = idev->dev; + nf_nat_masq_schedule(dev_net(idev->dev), &addr, dev->ifindex, + inet_cmp, GFP_KERNEL); return NOTIFY_DONE; } @@ -253,19 +264,6 @@ nf_nat_masquerade_ipv6(struct sk_buff *skb, const struct nf_nat_range2 *range, } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6); -static int inet6_cmp(struct nf_conn *ct, void *work) -{ - struct masq_dev_work *w = (struct masq_dev_work *)work; - struct nf_conntrack_tuple *tuple; - - if (!device_cmp(ct, (void *)(long)w->ifindex)) - return 0; - - tuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple; - - return nf_inet_addr_cmp(&w->addr, &tuple->dst.u3); -} - /* atomic notifier; can't call nf_ct_iterate_cleanup_net (it can sleep). * * Defer it to the system workqueue. @@ -289,7 +287,7 @@ static int masq_inet6_event(struct notifier_block *this, addr.in6 = ifa->addr; - nf_nat_masq_schedule(dev_net(dev), &addr, dev->ifindex, inet6_cmp, + nf_nat_masq_schedule(dev_net(dev), &addr, dev->ifindex, inet_cmp, GFP_ATOMIC); return NOTIFY_DONE; } -- cgit From cc8072153aafd65bff1b3679a112cb6ba71ab375 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 17 Sep 2021 11:56:25 +0200 Subject: netfilter: iptable_raw: drop bogus net_init annotation This is a leftover from the times when this function was wired up via pernet_operations. Now its called when userspace asks for the table. With CONFIG_NET_NS=n, iptable_raw_table_init memory has been discarded already and we get a kernel crash. Other tables are fine, __net_init annotation was removed already. Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Reported-by: youling 257 Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/iptable_raw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/netfilter/iptable_raw.c b/net/ipv4/netfilter/iptable_raw.c index b88e0f36cd05..8265c6765705 100644 --- a/net/ipv4/netfilter/iptable_raw.c +++ b/net/ipv4/netfilter/iptable_raw.c @@ -42,7 +42,7 @@ iptable_raw_hook(void *priv, struct sk_buff *skb, static struct nf_hook_ops *rawtable_ops __read_mostly; -static int __net_init iptable_raw_table_init(struct net *net) +static int iptable_raw_table_init(struct net *net) { struct ipt_replace *repl; const struct xt_table *table = &packet_raw; -- cgit From b53deef054e58fe4f37c66211b8ece9f8fc1aa13 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 17 Sep 2021 18:50:17 +0200 Subject: netfilter: log: work around missing softdep backend module iptables/nftables has two types of log modules: 1. backend, e.g. nf_log_syslog, which implement the functionality 2. frontend, e.g. xt_LOG or nft_log, which call the functionality provided by backend based on nf_tables or xtables rule set. Problem is that the request_module() call to load the backed in nf_logger_find_get() might happen with nftables transaction mutex held in case the call path is via nf_tables/nft_compat. This can cause deadlocks (see 'Fixes' tags for details). The chosen solution as to let modprobe deal with this by adding 'pre: ' soft dep tag to xt_LOG (to load the syslog backend) and xt_NFLOG (to load nflog backend). Eric reports that this breaks on systems with older modprobe that doesn't support softdeps. Another, similar issue occurs when someone either insmods xt_(NF)LOG directly or unloads the backend module (possible if no log frontend is in use): because the frontend module is already loaded, modprobe is not invoked again so the softdep isn't evaluated. Add a workaround: If nf_logger_find_get() returns -ENOENT and call is not via nft_compat, load the backend explicitly and try again. Else, let nft_compat ask for deferred request_module via nf_tables infra. Softdeps are kept in-place, so with newer modprobe the dependencies are resolved from userspace. Fixes: cefa31a9d461 ("netfilter: nft_log: perform module load from nf_tables") Fixes: a38b5b56d6f4 ("netfilter: nf_log: add module softdeps") Reported-and-tested-by: Eric Dumazet Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_compat.c | 17 ++++++++++++++++- net/netfilter/xt_LOG.c | 10 +++++++++- net/netfilter/xt_NFLOG.c | 10 +++++++++- 3 files changed, 34 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c index 272bcdb1392d..f69cc73c5813 100644 --- a/net/netfilter/nft_compat.c +++ b/net/netfilter/nft_compat.c @@ -19,6 +19,7 @@ #include #include #include +#include /* Used for matches where *info is larger than X byte */ #define NFT_MATCH_LARGE_THRESH 192 @@ -257,8 +258,22 @@ nft_target_init(const struct nft_ctx *ctx, const struct nft_expr *expr, nft_compat_wait_for_destructors(); ret = xt_check_target(&par, size, proto, inv); - if (ret < 0) + if (ret < 0) { + if (ret == -ENOENT) { + const char *modname = NULL; + + if (strcmp(target->name, "LOG") == 0) + modname = "nf_log_syslog"; + else if (strcmp(target->name, "NFLOG") == 0) + modname = "nfnetlink_log"; + + if (modname && + nft_request_module(ctx->net, "%s", modname) == -EAGAIN) + return -EAGAIN; + } + return ret; + } /* The standard target cannot be used */ if (!target->target) diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c index 2ff75f7637b0..f39244f9c0ed 100644 --- a/net/netfilter/xt_LOG.c +++ b/net/netfilter/xt_LOG.c @@ -44,6 +44,7 @@ log_tg(struct sk_buff *skb, const struct xt_action_param *par) static int log_tg_check(const struct xt_tgchk_param *par) { const struct xt_log_info *loginfo = par->targinfo; + int ret; if (par->family != NFPROTO_IPV4 && par->family != NFPROTO_IPV6) return -EINVAL; @@ -58,7 +59,14 @@ static int log_tg_check(const struct xt_tgchk_param *par) return -EINVAL; } - return nf_logger_find_get(par->family, NF_LOG_TYPE_LOG); + ret = nf_logger_find_get(par->family, NF_LOG_TYPE_LOG); + if (ret != 0 && !par->nft_compat) { + request_module("%s", "nf_log_syslog"); + + ret = nf_logger_find_get(par->family, NF_LOG_TYPE_LOG); + } + + return ret; } static void log_tg_destroy(const struct xt_tgdtor_param *par) diff --git a/net/netfilter/xt_NFLOG.c b/net/netfilter/xt_NFLOG.c index fb5793208059..e660c3710a10 100644 --- a/net/netfilter/xt_NFLOG.c +++ b/net/netfilter/xt_NFLOG.c @@ -42,13 +42,21 @@ nflog_tg(struct sk_buff *skb, const struct xt_action_param *par) static int nflog_tg_check(const struct xt_tgchk_param *par) { const struct xt_nflog_info *info = par->targinfo; + int ret; if (info->flags & ~XT_NFLOG_MASK) return -EINVAL; if (info->prefix[sizeof(info->prefix) - 1] != '\0') return -EINVAL; - return nf_logger_find_get(par->family, NF_LOG_TYPE_ULOG); + ret = nf_logger_find_get(par->family, NF_LOG_TYPE_ULOG); + if (ret != 0 && !par->nft_compat) { + request_module("%s", "nfnetlink_log"); + + ret = nf_logger_find_get(par->family, NF_LOG_TYPE_ULOG); + } + + return ret; } static void nflog_tg_destroy(const struct xt_tgdtor_param *par) -- cgit From e9edc188fc76499b0b9bd60364084037f6d03773 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 17 Sep 2021 15:15:56 -0700 Subject: netfilter: conntrack: serialize hash resizes and cleanups Syzbot was able to trigger the following warning [1] No repro found by syzbot yet but I was able to trigger similar issue by having 2 scripts running in parallel, changing conntrack hash sizes, and: for j in `seq 1 1000` ; do unshare -n /bin/true >/dev/null ; done It would take more than 5 minutes for net_namespace structures to be cleaned up. This is because nf_ct_iterate_cleanup() has to restart everytime a resize happened. By adding a mutex, we can serialize hash resizes and cleanups and also make get_next_corpse() faster by skipping over empty buckets. Even without resizes in the picture, this patch considerably speeds up network namespace dismantles. [1] INFO: task syz-executor.0:8312 can't die for more than 144 seconds. task:syz-executor.0 state:R running task stack:25672 pid: 8312 ppid: 6573 flags:0x00004006 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 preempt_schedule_common+0x45/0xc0 kernel/sched/core.c:6408 preempt_schedule_thunk+0x16/0x18 arch/x86/entry/thunk_64.S:35 __local_bh_enable_ip+0x109/0x120 kernel/softirq.c:390 local_bh_enable include/linux/bottom_half.h:32 [inline] get_next_corpse net/netfilter/nf_conntrack_core.c:2252 [inline] nf_ct_iterate_cleanup+0x15a/0x450 net/netfilter/nf_conntrack_core.c:2275 nf_conntrack_cleanup_net_list+0x14c/0x4f0 net/netfilter/nf_conntrack_core.c:2469 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:171 setup_net+0x639/0xa30 net/core/net_namespace.c:349 copy_net_ns+0x319/0x760 net/core/net_namespace.c:470 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3128 __do_sys_unshare kernel/fork.c:3202 [inline] __se_sys_unshare kernel/fork.c:3200 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3200 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f63da68e739 RSP: 002b:00007f63d7c05188 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f63da792f80 RCX: 00007f63da68e739 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000000 RBP: 00007f63da6e8cc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f63da792f80 R13: 00007fff50b75d3f R14: 00007f63d7c05300 R15: 0000000000022000 Showing all locks held in the system: 1 lock held by khungtaskd/27: #0: ffffffff8b980020 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6446 2 locks held by kworker/u4:2/153: #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1198 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:634 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:661 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x896/0x1690 kernel/workqueue.c:2268 #1: ffffc9000140fdb0 ((kfence_timer).work){+.+.}-{0:0}, at: process_one_work+0x8ca/0x1690 kernel/workqueue.c:2272 1 lock held by systemd-udevd/2970: 1 lock held by in:imklog/6258: #0: ffff88807f970ff0 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:990 3 locks held by kworker/1:6/8158: 1 lock held by syz-executor.0/8312: 2 locks held by kworker/u4:13/9320: 1 lock held by syz-executor.5/10178: 1 lock held by syz-executor.4/10217: Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 70 +++++++++++++++++++++------------------ 1 file changed, 37 insertions(+), 33 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 97b91d62589d..770a63103c7a 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -74,6 +74,9 @@ static __read_mostly struct kmem_cache *nf_conntrack_cachep; static DEFINE_SPINLOCK(nf_conntrack_locks_all_lock); static __read_mostly bool nf_conntrack_locks_all; +/* serialize hash resizes and nf_ct_iterate_cleanup */ +static DEFINE_MUTEX(nf_conntrack_mutex); + #define GC_SCAN_INTERVAL (120u * HZ) #define GC_SCAN_MAX_DURATION msecs_to_jiffies(10) @@ -2263,28 +2266,31 @@ get_next_corpse(int (*iter)(struct nf_conn *i, void *data), spinlock_t *lockp; for (; *bucket < nf_conntrack_htable_size; (*bucket)++) { + struct hlist_nulls_head *hslot = &nf_conntrack_hash[*bucket]; + + if (hlist_nulls_empty(hslot)) + continue; + lockp = &nf_conntrack_locks[*bucket % CONNTRACK_LOCKS]; local_bh_disable(); nf_conntrack_lock(lockp); - if (*bucket < nf_conntrack_htable_size) { - hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[*bucket], hnnode) { - if (NF_CT_DIRECTION(h) != IP_CT_DIR_REPLY) - continue; - /* All nf_conn objects are added to hash table twice, one - * for original direction tuple, once for the reply tuple. - * - * Exception: In the IPS_NAT_CLASH case, only the reply - * tuple is added (the original tuple already existed for - * a different object). - * - * We only need to call the iterator once for each - * conntrack, so we just use the 'reply' direction - * tuple while iterating. - */ - ct = nf_ct_tuplehash_to_ctrack(h); - if (iter(ct, data)) - goto found; - } + hlist_nulls_for_each_entry(h, n, hslot, hnnode) { + if (NF_CT_DIRECTION(h) != IP_CT_DIR_REPLY) + continue; + /* All nf_conn objects are added to hash table twice, one + * for original direction tuple, once for the reply tuple. + * + * Exception: In the IPS_NAT_CLASH case, only the reply + * tuple is added (the original tuple already existed for + * a different object). + * + * We only need to call the iterator once for each + * conntrack, so we just use the 'reply' direction + * tuple while iterating. + */ + ct = nf_ct_tuplehash_to_ctrack(h); + if (iter(ct, data)) + goto found; } spin_unlock(lockp); local_bh_enable(); @@ -2302,26 +2308,20 @@ found: static void nf_ct_iterate_cleanup(int (*iter)(struct nf_conn *i, void *data), void *data, u32 portid, int report) { - unsigned int bucket = 0, sequence; + unsigned int bucket = 0; struct nf_conn *ct; might_sleep(); - for (;;) { - sequence = read_seqcount_begin(&nf_conntrack_generation); - - while ((ct = get_next_corpse(iter, data, &bucket)) != NULL) { - /* Time to push up daises... */ + mutex_lock(&nf_conntrack_mutex); + while ((ct = get_next_corpse(iter, data, &bucket)) != NULL) { + /* Time to push up daises... */ - nf_ct_delete(ct, portid, report); - nf_ct_put(ct); - cond_resched(); - } - - if (!read_seqcount_retry(&nf_conntrack_generation, sequence)) - break; - bucket = 0; + nf_ct_delete(ct, portid, report); + nf_ct_put(ct); + cond_resched(); } + mutex_unlock(&nf_conntrack_mutex); } struct iter_data { @@ -2557,8 +2557,10 @@ int nf_conntrack_hash_resize(unsigned int hashsize) if (!hash) return -ENOMEM; + mutex_lock(&nf_conntrack_mutex); old_size = nf_conntrack_htable_size; if (old_size == hashsize) { + mutex_unlock(&nf_conntrack_mutex); kvfree(hash); return 0; } @@ -2598,6 +2600,8 @@ int nf_conntrack_hash_resize(unsigned int hashsize) nf_conntrack_all_unlock(); local_bh_enable(); + mutex_unlock(&nf_conntrack_mutex); + synchronize_net(); kvfree(old_hash); return 0; -- cgit From af505cad9567f7a500d34bf183696d570d7f6810 Mon Sep 17 00:00:00 2001 From: Nirmoy Das Date: Thu, 2 Sep 2021 12:29:17 +0200 Subject: debugfs: debugfs_create_file_size(): use IS_ERR to check for error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit debugfs_create_file() returns encoded error so use IS_ERR for checking return value. Reviewed-by: Christian König Signed-off-by: Nirmoy Das Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL") Cc: stable References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686 Link: https://lore.kernel.org/r/20210902102917.2233-1-nirmoy.das@amd.com Signed-off-by: Greg Kroah-Hartman --- fs/debugfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index 8129a430d789..2f117c57160d 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -528,7 +528,7 @@ void debugfs_create_file_size(const char *name, umode_t mode, { struct dentry *de = debugfs_create_file(name, mode, parent, data, fops); - if (de) + if (!IS_ERR(de)) d_inode(de)->i_size = file_size; } EXPORT_SYMBOL_GPL(debugfs_create_file_size); -- cgit From 555f66d0f8a38537456acc77043d0e4469fcbe8e Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Tue, 14 Sep 2021 11:20:06 +0200 Subject: nvme-fc: update hardware queues before using them In case the number of hardware queues changes, we need to update the tagset and the mapping of ctx to hctx first. If we try to create and connect the I/O queues first, this operation will fail (target will reject the connect call due to the wrong number of queues) and hence we bail out of the recreate function. Then we will to try the very same operation again, thus we don't make any progress. Signed-off-by: Daniel Wagner Reviewed-by: Ming Lei Reviewed-by: Himanshu Madhani Reviewed-by: Hannes Reinecke Reviewed-by: James Smart Signed-off-by: Christoph Hellwig --- drivers/nvme/host/fc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index b08a61ca283f..b5d9a5507de5 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2951,14 +2951,6 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) if (ctrl->ctrl.queue_count == 1) return 0; - ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1); - if (ret) - goto out_free_io_queues; - - ret = nvme_fc_connect_io_queues(ctrl, ctrl->ctrl.sqsize + 1); - if (ret) - goto out_delete_hw_queues; - if (prior_ioq_cnt != nr_io_queues) { dev_info(ctrl->ctrl.device, "reconnect: revising io queue count from %d to %d\n", @@ -2968,6 +2960,14 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) nvme_unfreeze(&ctrl->ctrl); } + ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1); + if (ret) + goto out_free_io_queues; + + ret = nvme_fc_connect_io_queues(ctrl, ctrl->ctrl.sqsize + 1); + if (ret) + goto out_delete_hw_queues; + return 0; out_delete_hw_queues: -- cgit From e5445dae29d25d7b03e0a10d3d4277a1d0c8119b Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 14 Sep 2021 11:20:07 +0200 Subject: nvme-fc: avoid race between time out and tear down To avoid race between time out and tear down, in tear down process, first we quiesce the queue, and then delete the timer and cancel the time out work for the queue. This patch merges the admin and io sync ops into the queue teardown logic as shown in the RDMA patch 3017013dcc "nvme-rdma: avoid race between time out and tear down". There is no teardown_lock in nvme-fc. Signed-off-by: James Smart Tested-by: Daniel Wagner Reviewed-by: Himanshu Madhani Reviewed-by: Hannes Reinecke Reviewed-by: Daniel Wagner Signed-off-by: Christoph Hellwig --- drivers/nvme/host/fc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index b5d9a5507de5..6ebe68396712 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2487,6 +2487,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) */ if (ctrl->ctrl.queue_count > 1) { nvme_stop_queues(&ctrl->ctrl); + nvme_sync_io_queues(&ctrl->ctrl); blk_mq_tagset_busy_iter(&ctrl->tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); blk_mq_tagset_wait_completed_request(&ctrl->tag_set); @@ -2510,6 +2511,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) * clean up the admin queue. Same thing as above. */ blk_mq_quiesce_queue(ctrl->ctrl.admin_q); + blk_sync_queue(ctrl->ctrl.admin_q); blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); blk_mq_tagset_wait_completed_request(&ctrl->admin_tag_set); -- cgit From bdaa1365667103e7a754e87c08b846a979ce322b Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 14 Sep 2021 11:20:08 +0200 Subject: nvme-fc: remove freeze/unfreeze around update_nr_hw_queues Remove the freeze/unfreeze around changes to the number of hardware queues. Study and retest has indicated there are no ios that can be active at this point so there is nothing to freeze. nvme-fc is draining the queues in the shutdown and error recovery path in __nvme_fc_abort_outstanding_ios. This patch primarily reverts 88e837ed0f1f "nvme-fc: wait for queues to freeze before calling update_hr_hw_queues". It's not an exact revert as it leaves the adjusting of hw queues only if the count changes. Signed-off-by: James Smart [dwagner: added explanation why no IO is pending] Signed-off-by: Daniel Wagner Reviewed-by: Ming Lei Reviewed-by: Himanshu Madhani Reviewed-by: Hannes Reinecke Signed-off-by: Christoph Hellwig --- drivers/nvme/host/fc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 6ebe68396712..aa14ad963d91 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2957,9 +2957,7 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) dev_info(ctrl->ctrl.device, "reconnect: revising io queue count from %d to %d\n", prior_ioq_cnt, nr_io_queues); - nvme_wait_freeze(&ctrl->ctrl); blk_mq_update_nr_hw_queues(&ctrl->tag_set, nr_io_queues); - nvme_unfreeze(&ctrl->ctrl); } ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1); -- cgit From e371af033c560b9dd1e861f8f0b503142bf0a06c Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 14 Sep 2021 18:38:55 +0300 Subject: nvme-tcp: fix incorrect h2cdata pdu offset accounting When the controller sends us multiple r2t PDUs in a single request we need to account for it correctly as our send/recv context run concurrently (i.e. we get a new r2t with r2t_offset before we updated our iterator and req->data_sent marker). This can cause wrong offsets to be sent to the controller. To fix that, we will first know that this may happen only in the send sequence of the last page, hence we will take the r2t_offset to the h2c PDU data_offset, and in nvme_tcp_try_send_data loop, we make sure to increment the request markers also when we completed a PDU but we are expecting more r2t PDUs as we still did not send the entire data of the request. Fixes: 825619b09ad3 ("nvme-tcp: fix possible use-after-completion") Reported-by: Nowak, Lukasz Tested-by: Nowak, Lukasz Signed-off-by: Sagi Grimberg Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/tcp.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index e4249b7dc056..3c1c29dd3020 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -620,7 +620,7 @@ static int nvme_tcp_setup_h2c_data_pdu(struct nvme_tcp_request *req, cpu_to_le32(data->hdr.hlen + hdgst + req->pdu_len + ddgst); data->ttag = pdu->ttag; data->command_id = nvme_cid(rq); - data->data_offset = cpu_to_le32(req->data_sent); + data->data_offset = pdu->r2t_offset; data->data_length = cpu_to_le32(req->pdu_len); return 0; } @@ -953,7 +953,15 @@ static int nvme_tcp_try_send_data(struct nvme_tcp_request *req) nvme_tcp_ddgst_update(queue->snd_hash, page, offset, ret); - /* fully successful last write*/ + /* + * update the request iterator except for the last payload send + * in the request where we don't want to modify it as we may + * compete with the RX path completing the request. + */ + if (req->data_sent + ret < req->data_len) + nvme_tcp_advance_req(req, ret); + + /* fully successful last send in current PDU */ if (last && ret == len) { if (queue->data_digest) { nvme_tcp_ddgst_final(queue->snd_hash, @@ -965,7 +973,6 @@ static int nvme_tcp_try_send_data(struct nvme_tcp_request *req) } return 1; } - nvme_tcp_advance_req(req, ret); } return -EAGAIN; } -- cgit From 298ba0e3d4af539cc37f982d4c011a0f07fca48c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 14 Sep 2021 08:38:20 +0200 Subject: nvme: keep ctrl->namespaces ordered Various places in the nvme code that rely on ctrl->namespace to be ordered. Ensure that the namespae is inserted into the list at the right position from the start instead of sorting it after the fact. Fixes: 540c801c65eb ("NVMe: Implement namespace list scanning") Reported-by: Anton Eidelman Signed-off-by: Christoph Hellwig Reviewed-by: Keith Busch Reviewed-by: Sagi Grimberg Reviewed-by: Chaitanya Kulkarni Reviewed-by: Damien Le Moal --- drivers/nvme/host/core.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 6600e138945e..e486845d2c7e 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -3716,15 +3715,6 @@ out_unlock: return ret; } -static int ns_cmp(void *priv, const struct list_head *a, - const struct list_head *b) -{ - struct nvme_ns *nsa = container_of(a, struct nvme_ns, list); - struct nvme_ns *nsb = container_of(b, struct nvme_ns, list); - - return nsa->head->ns_id - nsb->head->ns_id; -} - struct nvme_ns *nvme_find_get_ns(struct nvme_ctrl *ctrl, unsigned nsid) { struct nvme_ns *ns, *ret = NULL; @@ -3745,6 +3735,22 @@ struct nvme_ns *nvme_find_get_ns(struct nvme_ctrl *ctrl, unsigned nsid) } EXPORT_SYMBOL_NS_GPL(nvme_find_get_ns, NVME_TARGET_PASSTHRU); +/* + * Add the namespace to the controller list while keeping the list ordered. + */ +static void nvme_ns_add_to_ctrl_list(struct nvme_ns *ns) +{ + struct nvme_ns *tmp; + + list_for_each_entry_reverse(tmp, &ns->ctrl->namespaces, list) { + if (tmp->head->ns_id < ns->head->ns_id) { + list_add(&ns->list, &tmp->list); + return; + } + } + list_add(&ns->list, &ns->ctrl->namespaces); +} + static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid, struct nvme_ns_ids *ids) { @@ -3795,9 +3801,8 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid, goto out_unlink_ns; down_write(&ctrl->namespaces_rwsem); - list_add_tail(&ns->list, &ctrl->namespaces); + nvme_ns_add_to_ctrl_list(ns); up_write(&ctrl->namespaces_rwsem); - nvme_get_ctrl(ctrl); if (device_add_disk(ctrl->device, ns->disk, nvme_ns_id_attr_groups)) @@ -4080,10 +4085,6 @@ static void nvme_scan_work(struct work_struct *work) if (nvme_scan_ns_list(ctrl) != 0) nvme_scan_ns_sequential(ctrl); mutex_unlock(&ctrl->scan_lock); - - down_write(&ctrl->namespaces_rwsem); - list_sort(NULL, &ctrl->namespaces, ns_cmp); - up_write(&ctrl->namespaces_rwsem); } /* -- cgit From 96f5bd03e1be606987644b71899ea56a8d05f825 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Mon, 20 Sep 2021 12:03:45 +0200 Subject: xen/balloon: fix balloon kthread freezing Commit 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") switched the Xen balloon driver to use a kernel thread. Unfortunately the patch omitted to call try_to_freeze() or to use wait_event_freezable_timeout(), causing a system suspend to fail. Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20210920100345.21939-1-jgross@suse.com Signed-off-by: Juergen Gross --- drivers/xen/balloon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 2d2803883306..43ebfe36ac27 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -522,8 +522,8 @@ static int balloon_thread(void *unused) timeout = 3600 * HZ; credit = current_credit(); - wait_event_interruptible_timeout(balloon_thread_wq, - balloon_thread_cond(state, credit), timeout); + wait_event_freezable_timeout(balloon_thread_wq, + balloon_thread_cond(state, credit), timeout); if (kthread_should_stop()) return 0; -- cgit From 0594c58161b6e0f3da8efa9c6e3d4ba52b652717 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 20 Sep 2021 18:15:11 +0200 Subject: xen/x86: fix PV trap handling on secondary processors The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4cac4f4e ("xen: SMP guest support") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com Signed-off-by: Juergen Gross --- arch/x86/xen/enlighten_pv.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index 349f780a1567..6e0d0754f94f 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -755,8 +755,8 @@ static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g) preempt_enable(); } -static void xen_convert_trap_info(const struct desc_ptr *desc, - struct trap_info *traps) +static unsigned xen_convert_trap_info(const struct desc_ptr *desc, + struct trap_info *traps, bool full) { unsigned in, out, count; @@ -766,17 +766,18 @@ static void xen_convert_trap_info(const struct desc_ptr *desc, for (in = out = 0; in < count; in++) { gate_desc *entry = (gate_desc *)(desc->address) + in; - if (cvt_gate_to_trap(in, entry, &traps[out])) + if (cvt_gate_to_trap(in, entry, &traps[out]) || full) out++; } - traps[out].address = 0; + + return out; } void xen_copy_trap_info(struct trap_info *traps) { const struct desc_ptr *desc = this_cpu_ptr(&idt_desc); - xen_convert_trap_info(desc, traps); + xen_convert_trap_info(desc, traps, true); } /* Load a new IDT into Xen. In principle this can be per-CPU, so we @@ -786,6 +787,7 @@ static void xen_load_idt(const struct desc_ptr *desc) { static DEFINE_SPINLOCK(lock); static struct trap_info traps[257]; + unsigned out; trace_xen_cpu_load_idt(desc); @@ -793,7 +795,8 @@ static void xen_load_idt(const struct desc_ptr *desc) memcpy(this_cpu_ptr(&idt_desc), desc, sizeof(idt_desc)); - xen_convert_trap_info(desc, traps); + out = xen_convert_trap_info(desc, traps, false); + memset(&traps[out], 0, sizeof(traps[0])); xen_mc_flush(); if (HYPERVISOR_set_trap_table(traps)) -- cgit From 8aa83e6395ce047a506f0b16edca45f36c1ae7f8 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Mon, 20 Sep 2021 14:04:21 +0200 Subject: x86/setup: Call early_reserve_memory() earlier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit in Fixes introduced early_reserve_memory() to do all needed initial memblock_reserve() calls in one function. Unfortunately, the call of early_reserve_memory() is done too late for Xen dom0, as in some cases a Xen hook called by e820__memory_setup() will need those memory reservations to have happened already. Move the call of early_reserve_memory() before the call of e820__memory_setup() in order to avoid such problems. Fixes: a799c2bd29d1 ("x86/setup: Consolidate early memory reservations") Reported-by: Marek Marczykowski-Górecki Signed-off-by: Juergen Gross Signed-off-by: Borislav Petkov Tested-by: Marek Marczykowski-Górecki Tested-by: Nathan Chancellor Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210920120421.29276-1-jgross@suse.com --- arch/x86/kernel/setup.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 79f164141116..40ed44ead063 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -830,6 +830,20 @@ void __init setup_arch(char **cmdline_p) x86_init.oem.arch_setup(); + /* + * Do some memory reservations *before* memory is added to memblock, so + * memblock allocations won't overwrite it. + * + * After this point, everything still needed from the boot loader or + * firmware or kernel text should be early reserved or marked not RAM in + * e820. All other memory is free game. + * + * This call needs to happen before e820__memory_setup() which calls the + * xen_memory_setup() on Xen dom0 which relies on the fact that those + * early reservations have happened already. + */ + early_reserve_memory(); + iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1; e820__memory_setup(); parse_setup_data(); @@ -876,18 +890,6 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); - /* - * Do some memory reservations *before* memory is added to - * memblock, so memblock allocations won't overwrite it. - * Do it after early param, so we could get (unlikely) panic from - * serial. - * - * After this point everything still needed from the boot loader or - * firmware or kernel text should be early reserved or marked not - * RAM in e820. All other memory is free game. - */ - early_reserve_memory(); - #ifdef CONFIG_MEMORY_HOTPLUG /* * Memory used by the kernel cannot be hot-removed because Linux -- cgit From 6c90731980655280ea07ce4b21eb97457bf86286 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Mon, 20 Sep 2021 21:18:14 +0200 Subject: net/smc: add missing error check in smc_clc_prfx_set() Coverity stumbled over a missing error check in smc_clc_prfx_set(): *** CID 1475954: Error handling issues (CHECKED_RETURN) /net/smc/smc_clc.c: 233 in smc_clc_prfx_set() >>> CID 1475954: Error handling issues (CHECKED_RETURN) >>> Calling "kernel_getsockname" without checking return value (as is done elsewhere 8 out of 10 times). 233 kernel_getsockname(clcsock, (struct sockaddr *)&addrs); Add the return code check in smc_clc_prfx_set(). Fixes: c246d942eabc ("net/smc: restructure netinfo for CLC proposal msgs") Reported-by: Julian Wiedmann Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_clc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/smc/smc_clc.c b/net/smc/smc_clc.c index e286dafd6e88..6ec1ebe878ae 100644 --- a/net/smc/smc_clc.c +++ b/net/smc/smc_clc.c @@ -230,7 +230,8 @@ static int smc_clc_prfx_set(struct socket *clcsock, goto out_rel; } /* get address to which the internal TCP socket is bound */ - kernel_getsockname(clcsock, (struct sockaddr *)&addrs); + if (kernel_getsockname(clcsock, (struct sockaddr *)&addrs) < 0) + goto out_rel; /* analyze IP specific data of net_device belonging to TCP socket */ addr6 = (struct sockaddr_in6 *)&addrs; rcu_read_lock(); -- cgit From a18cee4791b1123d0a6579a7c89f4b87e48abe03 Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Mon, 20 Sep 2021 21:18:15 +0200 Subject: net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work The abort_work is scheduled when a connection was detected to be out-of-sync after a link failure. The work calls smc_conn_kill(), which calls smc_close_active_abort() and that might end up calling smc_close_cancel_work(). smc_close_cancel_work() cancels any pending close_work and tx_work but needs to release the sock_lock before and acquires the sock_lock again afterwards. So when the sock_lock was NOT acquired before then it may be held after the abort_work completes. Thats why the sock_lock is acquired before the call to smc_conn_kill() in __smc_lgr_terminate(), but this is missing in smc_conn_abort_work(). Fix that by acquiring the sock_lock first and release it after the call to smc_conn_kill(). Fixes: b286a0651e44 ("net/smc: handle incoming CDC validation message") Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/smc_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index af227b65669e..8280c938be80 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -1474,7 +1474,9 @@ static void smc_conn_abort_work(struct work_struct *work) abort_work); struct smc_sock *smc = container_of(conn, struct smc_sock, conn); + lock_sock(&smc->sk); smc_conn_kill(conn, true); + release_sock(&smc->sk); sock_put(&smc->sk); /* sock_hold done by schedulers of abort_work */ } -- cgit From e5845aa0eadda3d8a950eb8845c1396827131f30 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 21 Sep 2021 01:49:18 +0300 Subject: net: dsa: fix dsa_tree_setup error path Since the blamed commit, dsa_tree_teardown_switches() was split into two smaller functions, dsa_tree_teardown_switches and dsa_tree_teardown_ports. However, the error path of dsa_tree_setup stopped calling dsa_tree_teardown_ports. Fixes: a57d8c217aad ("net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/dsa/dsa2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index f14897d9b31d..f54639a3a822 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -1089,6 +1089,7 @@ static int dsa_tree_setup(struct dsa_switch_tree *dst) teardown_master: dsa_tree_teardown_master(dst); teardown_switches: + dsa_tree_teardown_ports(dst); dsa_tree_teardown_switches(dst); teardown_cpu_ports: dsa_tree_teardown_cpu_ports(dst); -- cgit From 3e95cfa24e24fbd7fb7675ab972a5aa507c7a89c Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 21 Sep 2021 15:41:23 +0900 Subject: Doc: networking: Fox a typo in ice.rst This patch fixes a spelling typo in ice.rst Signed-off-by: Masanari Iida Signed-off-by: David S. Miller --- Documentation/networking/device_drivers/ethernet/intel/ice.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/device_drivers/ethernet/intel/ice.rst b/Documentation/networking/device_drivers/ethernet/intel/ice.rst index e7d9cbff771b..67b7a701ce9e 100644 --- a/Documentation/networking/device_drivers/ethernet/intel/ice.rst +++ b/Documentation/networking/device_drivers/ethernet/intel/ice.rst @@ -851,7 +851,7 @@ NOTES: - 0x88A8 traffic will not be received unless VLAN stripping is disabled with the following command:: - # ethool -K rxvlan off + # ethtool -K rxvlan off - 0x88A8/0x8100 double VLANs cannot be used with 0x8100 or 0x8100/0x8100 VLANS configured on the same port. 0x88a8/0x8100 traffic will not be received if -- cgit From 2566fffd6011df17dfba0b216fe9a154d3eb3f75 Mon Sep 17 00:00:00 2001 From: Radhakrishna Sripada Date: Tue, 14 Sep 2021 15:07:44 -0700 Subject: drm/i915: Update memory bandwidth parameters Earlier while calculating derated bw we would use 90% of the calculated bw. Starting ADL-P we use a non standard derating. Updating the formulae to reflect the same. Bspec: 64631 v2: Use the new derating value only for ADL-P(MattR) Fixes: 4d32fe2f14a7 ("drm/i915/adl_p: Update memory bandwidth parameters") Cc: Matt Roper Signed-off-by: Radhakrishna Sripada Reviewed-by: Matt Roper Signed-off-by: Matt Roper Link: https://patchwork.freedesktop.org/patch/msgid/20210914220744.16042-1-radhakrishna.sripada@intel.com (cherry picked from commit f6d66fc8cf5f673ea76407be84dc17dbb3eda108) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_bw.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c index e91e0e0191fb..4b94256d7319 100644 --- a/drivers/gpu/drm/i915/display/intel_bw.c +++ b/drivers/gpu/drm/i915/display/intel_bw.c @@ -222,31 +222,42 @@ static int icl_sagv_max_dclk(const struct intel_qgv_info *qi) struct intel_sa_info { u16 displayrtids; - u8 deburst, deprogbwlimit; + u8 deburst, deprogbwlimit, derating; }; static const struct intel_sa_info icl_sa_info = { .deburst = 8, .deprogbwlimit = 25, /* GB/s */ .displayrtids = 128, + .derating = 10, }; static const struct intel_sa_info tgl_sa_info = { .deburst = 16, .deprogbwlimit = 34, /* GB/s */ .displayrtids = 256, + .derating = 10, }; static const struct intel_sa_info rkl_sa_info = { .deburst = 16, .deprogbwlimit = 20, /* GB/s */ .displayrtids = 128, + .derating = 10, }; static const struct intel_sa_info adls_sa_info = { .deburst = 16, .deprogbwlimit = 38, /* GB/s */ .displayrtids = 256, + .derating = 10, +}; + +static const struct intel_sa_info adlp_sa_info = { + .deburst = 16, + .deprogbwlimit = 38, /* GB/s */ + .displayrtids = 256, + .derating = 20, }; static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel_sa_info *sa) @@ -302,7 +313,7 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel bw = icl_calc_bw(sp->dclk, clpchgroup * 32 * num_channels, ct); bi->deratedbw[j] = min(maxdebw, - bw * 9 / 10); /* 90% */ + bw * (100 - sa->derating) / 100); drm_dbg_kms(&dev_priv->drm, "BW%d / QGV %d: num_planes=%d deratedbw=%u\n", @@ -400,7 +411,9 @@ void intel_bw_init_hw(struct drm_i915_private *dev_priv) if (IS_DG2(dev_priv)) dg2_get_bw_info(dev_priv); - else if (IS_ALDERLAKE_S(dev_priv) || IS_ALDERLAKE_P(dev_priv)) + else if (IS_ALDERLAKE_P(dev_priv)) + icl_get_bw_info(dev_priv, &adlp_sa_info); + else if (IS_ALDERLAKE_S(dev_priv)) icl_get_bw_info(dev_priv, &adls_sa_info); else if (IS_ROCKETLAKE(dev_priv)) icl_get_bw_info(dev_priv, &rkl_sa_info); -- cgit From f9b23c157a78c77545099312394d484ce4f35b8b Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Mon, 30 Aug 2021 14:09:48 +0200 Subject: drm/i915: Move __i915_gem_free_object to ttm_bo_destroy MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When we implement delayed destroy, we may have a second call to the delete_mem_notify() handler, while free_object() only should be called once. Move it to bo->destroy(), to ensure it's only called once. This fixes some weird memory corruption issues with delayed destroy when async eviction is used. Signed-off-by: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/20210830121006.2978297-2-maarten.lankhorst@linux.intel.com Fixes: 213d50927763 ("drm/i915/ttm: Introduce a TTM i915 gem object backend") Cc: Thomas Hellström Reviewed-by: Thomas Hellström (cherry picked from commit 48b0961269546716c3232748bf37e64e49fb866c) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gem/i915_gem_ttm.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/gem/i915_gem_ttm.c b/drivers/gpu/drm/i915/gem/i915_gem_ttm.c index 35eedc14f522..6ea13159bffc 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_ttm.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_ttm.c @@ -356,11 +356,8 @@ static void i915_ttm_delete_mem_notify(struct ttm_buffer_object *bo) { struct drm_i915_gem_object *obj = i915_ttm_to_gem(bo); - if (likely(obj)) { - /* This releases all gem object bindings to the backend. */ + if (likely(obj)) i915_ttm_free_cached_io_st(obj); - __i915_gem_free_object(obj); - } } static struct intel_memory_region * @@ -875,8 +872,12 @@ void i915_ttm_bo_destroy(struct ttm_buffer_object *bo) { struct drm_i915_gem_object *obj = i915_ttm_to_gem(bo); + /* This releases all gem object bindings to the backend. */ + __i915_gem_free_object(obj); + i915_gem_object_release_memory_region(obj); mutex_destroy(&obj->ttm.get_io_page.lock); + if (obj->ttm.created) call_rcu(&obj->rcu, __i915_gem_free_object_rcu); } -- cgit From b875fb313a10bf816b5d49d8d7642d1cc9905f2f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 9 Aug 2021 12:48:05 -0700 Subject: drm/i915: Free all DMC payloads MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Free all the DMC payloads, not just DMC_MAIN. unreferenced object 0xffff88ff32d4d800 (size 1024): comm "kworker/1:5", pid 701, jiffies 4294904239 (age 109.736s) hex dump (first 32 bytes): 40 40 00 0c 03 00 00 00 00 00 00 00 00 00 00 00 @@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915] [<000000001049fcab>] process_one_work+0x261/0x550 [<00000000eeb995ac>] worker_thread+0x49/0x3c0 [<0000000021031dc3>] kthread+0x10b/0x140 [<000000004a0f69ee>] ret_from_fork+0x1f/0x30 unreferenced object 0xffff88ff0bde4000 (size 1024): comm "kworker/0:3", pid 708, jiffies 4294904469 (age 108.816s) hex dump (first 32 bytes): 40 40 00 0c 01 00 00 00 00 00 00 00 00 00 00 00 @@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915] [<000000001049fcab>] process_one_work+0x261/0x550 [<00000000eeb995ac>] worker_thread+0x49/0x3c0 [<0000000021031dc3>] kthread+0x10b/0x140 [<000000004a0f69ee>] ret_from_fork+0x1f/0x30 Fixes: 3d5928a168a9 ("drm/i915/xelpd: Pipe A DMC plugging") Cc: Anusha Srivatsa Cc: José Roberto de Souza Signed-off-by: Chris Wilson Signed-off-by: Lucas De Marchi Reviewed-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20210809194805.3793060-1-lucas.demarchi@intel.com (cherry picked from commit 064b877dff4252ced91a1c8b1f129073f2991f6e) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_dmc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_dmc.c b/drivers/gpu/drm/i915/display/intel_dmc.c index 3c3c6cb5c0df..b3c8e1c450ef 100644 --- a/drivers/gpu/drm/i915/display/intel_dmc.c +++ b/drivers/gpu/drm/i915/display/intel_dmc.c @@ -805,11 +805,14 @@ void intel_dmc_ucode_resume(struct drm_i915_private *dev_priv) */ void intel_dmc_ucode_fini(struct drm_i915_private *dev_priv) { + int id; + if (!HAS_DMC(dev_priv)) return; intel_dmc_ucode_suspend(dev_priv); drm_WARN_ON(&dev_priv->drm, dev_priv->dmc.wakeref); - kfree(dev_priv->dmc.dmc_info[DMC_FW_MAIN].payload); + for (id = 0; id < DMC_FW_MAX; id++) + kfree(dev_priv->dmc.dmc_info[id].payload); } -- cgit From 8c8a3b5bd960cd88f7655b5251dc28741e11f139 Mon Sep 17 00:00:00 2001 From: Peter Collingbourne Date: Wed, 15 Sep 2021 12:03:35 -0700 Subject: arm64: add MTE supported check to thread switching and syscall entry/exit This lets us avoid doing unnecessary work on hardware that does not support MTE, and will allow us to freely use MTE instructions in the code called by mte_thread_switch(). Since this would mean that we do a redundant check in mte_check_tfsr_el1(), remove it and add two checks now required in its callers. This also avoids an unnecessary DSB+ISB sequence on the syscall exit path for hardware not supporting MTE. Fixes: 65812c6921cc ("arm64: mte: Enable async tag check fault") Cc: # 5.13.x Signed-off-by: Peter Collingbourne Link: https://linux-review.googlesource.com/id/I02fd000d1ef2c86c7d2952a7f099b254ec227a5d Link: https://lore.kernel.org/r/20210915190336.398390-1-pcc@google.com [catalin.marinas@arm.com: adjust the commit log slightly] Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/mte.h | 6 ++++++ arch/arm64/kernel/mte.c | 10 ++++------ 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/arch/arm64/include/asm/mte.h b/arch/arm64/include/asm/mte.h index 3f93b9e0b339..02511650cffe 100644 --- a/arch/arm64/include/asm/mte.h +++ b/arch/arm64/include/asm/mte.h @@ -99,11 +99,17 @@ void mte_check_tfsr_el1(void); static inline void mte_check_tfsr_entry(void) { + if (!system_supports_mte()) + return; + mte_check_tfsr_el1(); } static inline void mte_check_tfsr_exit(void) { + if (!system_supports_mte()) + return; + /* * The asynchronous faults are sync'ed automatically with * TFSR_EL1 on kernel entry but for exit an explicit dsb() diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c index 9d314a3bad3b..e5e801bc5312 100644 --- a/arch/arm64/kernel/mte.c +++ b/arch/arm64/kernel/mte.c @@ -142,12 +142,7 @@ void mte_enable_kernel_async(void) #ifdef CONFIG_KASAN_HW_TAGS void mte_check_tfsr_el1(void) { - u64 tfsr_el1; - - if (!system_supports_mte()) - return; - - tfsr_el1 = read_sysreg_s(SYS_TFSR_EL1); + u64 tfsr_el1 = read_sysreg_s(SYS_TFSR_EL1); if (unlikely(tfsr_el1 & SYS_TFSR_EL1_TF1)) { /* @@ -199,6 +194,9 @@ void mte_thread_init_user(void) void mte_thread_switch(struct task_struct *next) { + if (!system_supports_mte()) + return; + mte_update_sctlr_user(next); /* -- cgit From 5135e96a3dd2f4555ae6981c3155a62bcf3227f6 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 21 Sep 2021 00:42:08 +0300 Subject: net: dsa: don't allocate the slave_mii_bus using devres The Linux device model permits both the ->shutdown and ->remove driver methods to get called during a shutdown procedure. Example: a DSA switch which sits on an SPI bus, and the SPI bus driver calls this on its ->shutdown method: spi_unregister_controller -> device_for_each_child(&ctlr->dev, NULL, __unregister); -> spi_unregister_device(to_spi_device(dev)); -> device_del(&spi->dev); So this is a simple pattern which can theoretically appear on any bus, although the only other buses on which I've been able to find it are I2C: i2c_del_adapter -> device_for_each_child(&adap->dev, NULL, __unregister_client); -> i2c_unregister_device(client); -> device_unregister(&client->dev); The implication of this pattern is that devices on these buses can be unregistered after having been shut down. The drivers for these devices might choose to return early either from ->remove or ->shutdown if the other callback has already run once, and they might choose that the ->shutdown method should only perform a subset of the teardown done by ->remove (to avoid unnecessary delays when rebooting). So in other words, the device driver may choose on ->remove to not do anything (therefore to not unregister an MDIO bus it has registered on ->probe), because this ->remove is actually triggered by the device_shutdown path, and its ->shutdown method has already run and done the minimally required cleanup. This used to be fine until the blamed commit, but now, the following BUG_ON triggers: void mdiobus_free(struct mii_bus *bus) { /* For compatibility with error handling in drivers. */ if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; } BUG_ON(bus->state != MDIOBUS_UNREGISTERED); bus->state = MDIOBUS_RELEASED; put_device(&bus->dev); } In other words, there is an attempt to free an MDIO bus which was not unregistered. The attempt to free it comes from the devres release callbacks of the SPI device, which are executed after the device is unregistered. I'm not saying that the fact that MDIO buses allocated using devres would automatically get unregistered wasn't strange. I'm just saying that the commit didn't care about auditing existing call paths in the kernel, and now, the following code sequences are potentially buggy: (a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device located on a bus that unregisters its children on shutdown. After the blamed patch, either both the alloc and the register should use devres, or none should. (b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no mdiobus_unregister at all in the remove path. After the blamed patch, nobody unregisters the MDIO bus anymore, so this is even more buggy than the previous case which needs a specific bus configuration to be seen, this one is an unconditional bug. In this case, DSA falls into category (a), it tries to be helpful and registers an MDIO bus on behalf of the switch, which might be on such a bus. I've no idea why it does it under devres. It does this on probe: if (!ds->slave_mii_bus && ds->ops->phy_read) alloc and register mdio bus and this on remove: if (ds->slave_mii_bus && ds->ops->phy_read) unregister mdio bus I _could_ imagine using devres because the condition used on remove is different than the condition used on probe. So strictly speaking, DSA cannot determine whether the ds->slave_mii_bus it sees on remove is the ds->slave_mii_bus that _it_ has allocated on probe. Using devres would have solved that problem. But nonetheless, the existing code already proceeds to unregister the MDIO bus, even though it might be unregistering an MDIO bus it has never registered. So I can only guess that no driver that implements ds->ops->phy_read also allocates and registers ds->slave_mii_bus itself. So in that case, if unregistering is fine, freeing must be fine too. Stop using devres and free the MDIO bus manually. This will make devres stop attempting to free a still registered MDIO bus on ->shutdown. Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by: Lino Sanfilippo Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Tested-by: Lino Sanfilippo Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- net/dsa/dsa2.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index f54639a3a822..b29262eee00b 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -880,7 +880,7 @@ static int dsa_switch_setup(struct dsa_switch *ds) devlink_params_publish(ds->devlink); if (!ds->slave_mii_bus && ds->ops->phy_read) { - ds->slave_mii_bus = devm_mdiobus_alloc(ds->dev); + ds->slave_mii_bus = mdiobus_alloc(); if (!ds->slave_mii_bus) { err = -ENOMEM; goto teardown; @@ -890,13 +890,16 @@ static int dsa_switch_setup(struct dsa_switch *ds) err = mdiobus_register(ds->slave_mii_bus); if (err < 0) - goto teardown; + goto free_slave_mii_bus; } ds->setup = true; return 0; +free_slave_mii_bus: + if (ds->slave_mii_bus && ds->ops->phy_read) + mdiobus_free(ds->slave_mii_bus); teardown: if (ds->ops->teardown) ds->ops->teardown(ds); @@ -921,8 +924,11 @@ static void dsa_switch_teardown(struct dsa_switch *ds) if (!ds->setup) return; - if (ds->slave_mii_bus && ds->ops->phy_read) + if (ds->slave_mii_bus && ds->ops->phy_read) { mdiobus_unregister(ds->slave_mii_bus); + mdiobus_free(ds->slave_mii_bus); + ds->slave_mii_bus = NULL; + } dsa_switch_unregister_notifier(ds); -- cgit From 74b6d7d13307b016f4b5bba8198297824c0ee6df Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 21 Sep 2021 00:42:09 +0300 Subject: net: dsa: realtek: register the MDIO bus under devres MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Linux device model permits both the ->shutdown and ->remove driver methods to get called during a shutdown procedure. Example: a DSA switch which sits on an SPI bus, and the SPI bus driver calls this on its ->shutdown method: spi_unregister_controller -> device_for_each_child(&ctlr->dev, NULL, __unregister); -> spi_unregister_device(to_spi_device(dev)); -> device_del(&spi->dev); So this is a simple pattern which can theoretically appear on any bus, although the only other buses on which I've been able to find it are I2C: i2c_del_adapter -> device_for_each_child(&adap->dev, NULL, __unregister_client); -> i2c_unregister_device(client); -> device_unregister(&client->dev); The implication of this pattern is that devices on these buses can be unregistered after having been shut down. The drivers for these devices might choose to return early either from ->remove or ->shutdown if the other callback has already run once, and they might choose that the ->shutdown method should only perform a subset of the teardown done by ->remove (to avoid unnecessary delays when rebooting). So in other words, the device driver may choose on ->remove to not do anything (therefore to not unregister an MDIO bus it has registered on ->probe), because this ->remove is actually triggered by the device_shutdown path, and its ->shutdown method has already run and done the minimally required cleanup. This used to be fine until the blamed commit, but now, the following BUG_ON triggers: void mdiobus_free(struct mii_bus *bus) { /* For compatibility with error handling in drivers. */ if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; } BUG_ON(bus->state != MDIOBUS_UNREGISTERED); bus->state = MDIOBUS_RELEASED; put_device(&bus->dev); } In other words, there is an attempt to free an MDIO bus which was not unregistered. The attempt to free it comes from the devres release callbacks of the SPI device, which are executed after the device is unregistered. I'm not saying that the fact that MDIO buses allocated using devres would automatically get unregistered wasn't strange. I'm just saying that the commit didn't care about auditing existing call paths in the kernel, and now, the following code sequences are potentially buggy: (a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device located on a bus that unregisters its children on shutdown. After the blamed patch, either both the alloc and the register should use devres, or none should. (b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no mdiobus_unregister at all in the remove path. After the blamed patch, nobody unregisters the MDIO bus anymore, so this is even more buggy than the previous case which needs a specific bus configuration to be seen, this one is an unconditional bug. In this case, the Realtek drivers fall under category (b). To solve it, we can register the MDIO bus under devres too, which restores the previous behavior. Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by: Lino Sanfilippo Reported-by: Alvin Šipraga Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/realtek-smi-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/realtek-smi-core.c b/drivers/net/dsa/realtek-smi-core.c index dd2f0d6208b3..2fcfd917b876 100644 --- a/drivers/net/dsa/realtek-smi-core.c +++ b/drivers/net/dsa/realtek-smi-core.c @@ -368,7 +368,7 @@ int realtek_smi_setup_mdio(struct realtek_smi *smi) smi->slave_mii_bus->parent = smi->dev; smi->ds->slave_mii_bus = smi->slave_mii_bus; - ret = of_mdiobus_register(smi->slave_mii_bus, mdio_np); + ret = devm_of_mdiobus_register(smi->dev, smi->slave_mii_bus, mdio_np); if (ret) { dev_err(smi->dev, "unable to register MDIO bus %s\n", smi->slave_mii_bus->id); -- cgit From 1bb30b20b49773369c299d4d6c65227201328663 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Sep 2021 16:13:42 +0300 Subject: thermal/core: Potential buffer overflow in thermal_build_list_of_policies() After printing the list of thermal governors, then this function prints a newline character. The problem is that "size" has not been updated after printing the last governor. This means that it can write one character (the NUL terminator) beyond the end of the buffer. Get rid of the "size" variable and just use "PAGE_SIZE - count" directly. Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling") Signed-off-by: Dan Carpenter Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210916131342.GB25094@kili --- drivers/thermal/thermal_core.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 97ef9b040b84..51374f4e1cca 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -222,15 +222,14 @@ int thermal_build_list_of_policies(char *buf) { struct thermal_governor *pos; ssize_t count = 0; - ssize_t size = PAGE_SIZE; mutex_lock(&thermal_governor_lock); list_for_each_entry(pos, &thermal_governor_list, governor_list) { - size = PAGE_SIZE - count; - count += scnprintf(buf + count, size, "%s ", pos->name); + count += scnprintf(buf + count, PAGE_SIZE - count, "%s ", + pos->name); } - count += scnprintf(buf + count, size, "\n"); + count += scnprintf(buf + count, PAGE_SIZE - count, "\n"); mutex_unlock(&thermal_governor_lock); -- cgit From cf96921876dcee4d6ac07b9de470368a075ba9ad Mon Sep 17 00:00:00 2001 From: Ansuel Smith Date: Tue, 7 Sep 2021 23:25:42 +0200 Subject: thermal/drivers/tsens: Fix wrong check for tzd in irq handlers Some devices can have some thermal sensors disabled from the factory. The current two irq handler functions check all the sensor by default and the check if the sensor was actually registered is wrong. The tzd is actually never set if the registration fails hence the IS_ERR check is wrong. Signed-off-by: Ansuel Smith Reviewed-by: Matthias Kaehlcke Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210907212543.20220-1-ansuelsmth@gmail.com --- drivers/thermal/qcom/tsens.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 4c7ebd1d3f9c..b1162e566a70 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -417,7 +417,7 @@ static irqreturn_t tsens_critical_irq_thread(int irq, void *data) const struct tsens_sensor *s = &priv->sensor[i]; u32 hw_id = s->hw_id; - if (IS_ERR(s->tzd)) + if (!s->tzd) continue; if (!tsens_threshold_violated(priv, hw_id, &d)) continue; @@ -467,7 +467,7 @@ static irqreturn_t tsens_irq_thread(int irq, void *data) const struct tsens_sensor *s = &priv->sensor[i]; u32 hw_id = s->hw_id; - if (IS_ERR(s->tzd)) + if (!s->tzd) continue; if (!tsens_threshold_violated(priv, hw_id, &d)) continue; -- cgit From 5b72dafaca73b33416c82457ae615e6f2022e901 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 17 Sep 2021 21:48:29 -0700 Subject: platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error When DELL_WMI=y, DELL_WMI_PRIVACY=y, and LEDS_TRIGGER_AUDIO=m, there is a linker error since the LEDS trigger code is built as a loadable module. This happens because DELL_WMI_PRIVACY is a bool that depends on a tristate (LEDS_TRIGGER_AUDIO=m), which can be dangerous. ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe': dell-wmi-privacy.c:(.text+0x3df): undefined reference to `ledtrig_audio_get' Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Randy Dunlap Cc: Perry Yuan Cc: Dell.Client.Kernel@dell.com Cc: platform-driver-x86@vger.kernel.org Cc: Hans de Goede Cc: Mark Gross Link: https://lore.kernel.org/r/20210918044829.19222-1-rdunlap@infradead.org Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/dell/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig index 821aba31821c..42513eab1d06 100644 --- a/drivers/platform/x86/dell/Kconfig +++ b/drivers/platform/x86/dell/Kconfig @@ -166,8 +166,7 @@ config DELL_WMI config DELL_WMI_PRIVACY bool "Dell WMI Hardware Privacy Support" - depends on DELL_WMI - depends on LEDS_TRIGGER_AUDIO + depends on LEDS_TRIGGER_AUDIO = y || DELL_WMI = LEDS_TRIGGER_AUDIO help This option adds integration with the "Dell Hardware Privacy" feature of Dell laptops to the dell-wmi driver. -- cgit From b201cb0ebe87b209e252d85668e517ac1929e250 Mon Sep 17 00:00:00 2001 From: José Expósito Date: Mon, 20 Sep 2021 18:03:12 +0200 Subject: platform/x86/intel: hid: Add DMI switches allow list MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some devices, even non convertible ones, can send incorrect SW_TABLET_MODE reports. Add an allow list and accept such reports only from devices in it. Bug reported for Dell XPS 17 9710 on: https://gitlab.freedesktop.org/libinput/libinput/-/issues/662 Reported-by: Tobias Gurtzick Suggested-by: Hans de Goede Tested-by: Tobias Gurtzick Signed-off-by: José Expósito Link: https://lore.kernel.org/r/20210920160312.9787-1-jose.exposito89@gmail.com [hdegoede@redhat.com: Check dmi_switches_auto_add_allow_list only once] Signed-off-by: Hans de Goede --- drivers/platform/x86/intel/hid.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c index a33a5826e81a..08598942a6d7 100644 --- a/drivers/platform/x86/intel/hid.c +++ b/drivers/platform/x86/intel/hid.c @@ -118,12 +118,30 @@ static const struct dmi_system_id dmi_vgbs_allow_list[] = { { } }; +/* + * Some devices, even non convertible ones, can send incorrect SW_TABLET_MODE + * reports. Accept such reports only from devices in this list. + */ +static const struct dmi_system_id dmi_auto_add_switch[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "31" /* Convertible */), + }, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "32" /* Detachable */), + }, + }, + {} /* Array terminator */ +}; + struct intel_hid_priv { struct input_dev *input_dev; struct input_dev *array; struct input_dev *switches; bool wakeup_mode; - bool dual_accel; + bool auto_add_switch; }; #define HID_EVENT_FILTER_UUID "eeec56b3-4442-408f-a792-4edd4d758054" @@ -452,10 +470,8 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) * Some convertible have unreliable VGBS return which could cause incorrect * SW_TABLET_MODE report, in these cases we enable support when receiving * the first event instead of during driver setup. - * - * See dual_accel_detect.h for more info on the dual_accel check. */ - if (!priv->switches && !priv->dual_accel && (event == 0xcc || event == 0xcd)) { + if (!priv->switches && priv->auto_add_switch && (event == 0xcc || event == 0xcd)) { dev_info(&device->dev, "switch event received, enable switches supports\n"); err = intel_hid_switches_setup(device); if (err) @@ -596,7 +612,8 @@ static int intel_hid_probe(struct platform_device *device) return -ENOMEM; dev_set_drvdata(&device->dev, priv); - priv->dual_accel = dual_accel_detect(); + /* See dual_accel_detect.h for more info on the dual_accel check. */ + priv->auto_add_switch = dmi_check_system(dmi_auto_add_switch) && !dual_accel_detect(); err = intel_hid_input_setup(device); if (err) { -- cgit From 6f6aab1caf6c7fef46852aaab03f4e8250779e52 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Tue, 21 Sep 2021 12:07:02 +0200 Subject: platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Tested with a AMD Ryzen 7 5800X. Signed-off-by: Tobias Jakobi Acked-by: Thomas Weißschuh Link: https://lore.kernel.org/r/20210921100702.3838-1-tjakobi@math.uni-bielefeld.de Signed-off-by: Hans de Goede --- drivers/platform/x86/gigabyte-wmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/gigabyte-wmi.c b/drivers/platform/x86/gigabyte-wmi.c index 7f3a03f937f6..d53634c8a6e0 100644 --- a/drivers/platform/x86/gigabyte-wmi.c +++ b/drivers/platform/x86/gigabyte-wmi.c @@ -144,6 +144,7 @@ static const struct dmi_system_id gigabyte_wmi_known_working_platforms[] = { DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 AORUS ELITE"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 AORUS ELITE V2"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 GAMING X V2"), + DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550I AORUS PRO AX"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550M AORUS PRO-P"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550M DS3H"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("Z390 I AORUS PRO WIFI-CF"), -- cgit From 59a68d4138086c015ab8241c3267eec5550fbd44 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Fri, 17 Sep 2021 15:59:30 +0100 Subject: arm64: Mitigate MTE issues with str{n}cmp() As with strlen(), the patches importing the updated str{n}cmp() implementations were originally developed and tested before the advent of CONFIG_KASAN_HW_TAGS, and have subsequently revealed not to be MTE-safe. Since in-kernel MTE is still a rather niche case, let it temporarily fall back to the generic C versions for correctness until we can figure out the best fix. Fixes: 758602c04409 ("arm64: Import latest version of Cortex Strings' strcmp") Fixes: 020b199bc70d ("arm64: Import latest version of Cortex Strings' strncmp") Cc: # 5.14.x Reported-by: Branislav Rankov Signed-off-by: Robin Murphy Acked-by: Mark Rutland Link: https://lore.kernel.org/r/34dc4d12eec0adae49b0ac927df642ed10089d40.1631890770.git.robin.murphy@arm.com Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/assembler.h | 5 +++++ arch/arm64/include/asm/string.h | 2 ++ arch/arm64/lib/strcmp.S | 2 +- arch/arm64/lib/strncmp.S | 2 +- 4 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 89faca0e740d..bfa58409a4d4 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -525,6 +525,11 @@ alternative_endif #define EXPORT_SYMBOL_NOKASAN(name) EXPORT_SYMBOL(name) #endif +#ifdef CONFIG_KASAN_HW_TAGS +#define EXPORT_SYMBOL_NOHWKASAN(name) +#else +#define EXPORT_SYMBOL_NOHWKASAN(name) EXPORT_SYMBOL_NOKASAN(name) +#endif /* * Emit a 64-bit absolute little endian symbol reference in a way that * ensures that it will be resolved at build time, even when building a diff --git a/arch/arm64/include/asm/string.h b/arch/arm64/include/asm/string.h index 3a3264ff47b9..95f7686b728d 100644 --- a/arch/arm64/include/asm/string.h +++ b/arch/arm64/include/asm/string.h @@ -12,11 +12,13 @@ extern char *strrchr(const char *, int c); #define __HAVE_ARCH_STRCHR extern char *strchr(const char *, int c); +#ifndef CONFIG_KASAN_HW_TAGS #define __HAVE_ARCH_STRCMP extern int strcmp(const char *, const char *); #define __HAVE_ARCH_STRNCMP extern int strncmp(const char *, const char *, __kernel_size_t); +#endif #define __HAVE_ARCH_STRLEN extern __kernel_size_t strlen(const char *); diff --git a/arch/arm64/lib/strcmp.S b/arch/arm64/lib/strcmp.S index d7bee210a798..83bcad72ec97 100644 --- a/arch/arm64/lib/strcmp.S +++ b/arch/arm64/lib/strcmp.S @@ -173,4 +173,4 @@ L(done): ret SYM_FUNC_END_PI(strcmp) -EXPORT_SYMBOL_NOKASAN(strcmp) +EXPORT_SYMBOL_NOHWKASAN(strcmp) diff --git a/arch/arm64/lib/strncmp.S b/arch/arm64/lib/strncmp.S index 48d44f7fddb1..e42bcfcd37e6 100644 --- a/arch/arm64/lib/strncmp.S +++ b/arch/arm64/lib/strncmp.S @@ -258,4 +258,4 @@ L(ret0): ret SYM_FUNC_END_PI(strncmp) -EXPORT_SYMBOL_NOKASAN(strncmp) +EXPORT_SYMBOL_NOHWKASAN(strncmp) -- cgit From d9d1232b48344c6c72dbdf89fae1e7638e5df757 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:57:36 +0200 Subject: misc: bcm-vk: fix tty registration race Make sure to set the tty class-device driver data before registering the tty to avoid having a racing open() dereference a NULL pointer. Fixes: 91ca10d6fa07 ("misc: bcm-vk: add ttyVK support") Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917115736.5816-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/bcm-vk/bcm_vk_tty.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/misc/bcm-vk/bcm_vk_tty.c b/drivers/misc/bcm-vk/bcm_vk_tty.c index 1b6076a89ca6..6669625ba4c8 100644 --- a/drivers/misc/bcm-vk/bcm_vk_tty.c +++ b/drivers/misc/bcm-vk/bcm_vk_tty.c @@ -267,13 +267,13 @@ int bcm_vk_tty_init(struct bcm_vk *vk, char *name) struct device *tty_dev; tty_port_init(&vk->tty[i].port); - tty_dev = tty_port_register_device(&vk->tty[i].port, tty_drv, - i, dev); + tty_dev = tty_port_register_device_attr(&vk->tty[i].port, + tty_drv, i, dev, vk, + NULL); if (IS_ERR(tty_dev)) { err = PTR_ERR(tty_dev); goto unwind; } - dev_set_drvdata(tty_dev, vk); vk->tty[i].is_opened = false; } -- cgit From ce1c42b4dacfe7d71c852d8bf3371067ccba865c Mon Sep 17 00:00:00 2001 From: Julian Sikorski Date: Mon, 13 Sep 2021 20:14:55 +0200 Subject: Re-enable UAS for LaCie Rugged USB3-FW with fk quirk Further testing has revealed that LaCie Rugged USB3-FW does work with uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled. Link: https://lore.kernel.org/linux-usb/2167ea48-e273-a336-a4e0-10a4e883e75e@redhat.com/ Cc: stable Suggested-by: Hans de Goede Reviewed-by: Hans de Goede Acked-by: Oliver Neukum Signed-off-by: Julian Sikorski Link: https://lore.kernel.org/r/20210913181454.7365-1-belegdol+github@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index c35a6db993f1..4051c8cd0cd8 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -50,7 +50,7 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999, "LaCie", "Rugged USB3-FW", USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_IGNORE_UAS), + US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME), /* * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI -- cgit From b55d37ef6b7db3eda9b4495a8d9b0a944ee8c67d Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 13 Sep 2021 23:01:06 +0200 Subject: usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has broken tag handling, preventing the device from working at all: usb 1-1: new full-speed USB device number 2 using uhci_hcd usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60 usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0 usb 1-1: Product: USB Device usb 1-1: Manufacturer: USB Device usb-storage 1-1:1.0: USB Mass Storage device detected scsi host2: usb-storage 1-1:1.0 usbcore: registered new interface driver usb-storage usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address. 2.6c is the only firmware that claims Linux compatibility. The firmware can be upgraded using ezotgdbg utility: https://github.com/asciilifeform/ezotgdbg Acked-by: Alan Stern Signed-off-by: Ondrej Zary Cc: stable Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index efa972be2ee3..c6b3fcf90180 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -416,9 +416,16 @@ UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN), /* - * Reported by Ondrej Zary + * Reported by Ondrej Zary * The device reports one sector more and breaks when that sector is accessed + * Firmwares older than 2.6c (the latest one and the only that claims Linux + * support) have also broken tag handling */ +UNUSUAL_DEV( 0x04ce, 0x0002, 0x0000, 0x026b, + "ScanLogic", + "SL11R-IDE", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG), UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c, "ScanLogic", "SL11R-IDE", -- cgit From 517c7bf99bad3d6b9360558414aae634b7472d80 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Sep 2021 16:57:37 +0300 Subject: usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned() This is writing to the first 1 - 3 bytes of "val" and then writing all four bytes to musb_writel(). The last byte is always going to be garbage. Zero out the last bytes instead. Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Signed-off-by: Dan Carpenter Cc: stable Link: https://lore.kernel.org/r/20210916135737.GI25094@kili Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/tusb6010.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index c42937692207..c968ecda42aa 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -190,6 +190,7 @@ tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len) } if (len > 0) { /* Write the rest 1 - 3 bytes to FIFO */ + val = 0; memcpy(&val, buf, len); musb_writel(fifo, 0, val); } -- cgit From c86a2d9058c5a4a05d20ef89e699b7a6b2c89da6 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Fri, 17 Sep 2021 00:27:05 +0200 Subject: cpumask: Omit terminating null byte in cpumap_print_{list,bitmask}_to_buf The changes in the patch series [1] introduced a terminating null byte when reading from cpulist or cpumap sysfs files, for example: $ xxd /sys/devices/system/node/node0/cpulist 00000000: 302d 310a 00 0-1.. Before this change, the output looked as follows: $ xxd /sys/devices/system/node/node0/cpulist 00000000: 302d 310a 0-1. Fix this regression by excluding the terminating null byte from the returned length in cpumap_print_list_to_buf and cpumap_print_bitmask_to_buf. [1] https://lore.kernel.org/all/20210806110251.560-1-song.bao.hua@hisilicon.com/ Fixes: 1fae562983ca ("cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list") Acked-by: Barry Song Acked-by: Yury Norov Signed-off-by: Tobias Klauser Link: https://lore.kernel.org/r/20210916222705.13554-1-tklauser@distanz.ch Signed-off-by: Greg Kroah-Hartman --- include/linux/cpumask.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 5d4d07a9e1ed..1e7399fc69c0 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -996,14 +996,15 @@ cpumap_print_to_pagebuf(bool list, char *buf, const struct cpumask *mask) * cpumask; Typically used by bin_attribute to export cpumask bitmask * ABI. * - * Returns the length of how many bytes have been copied. + * Returns the length of how many bytes have been copied, excluding + * terminating '\0'. */ static inline ssize_t cpumap_print_bitmask_to_buf(char *buf, const struct cpumask *mask, loff_t off, size_t count) { return bitmap_print_bitmask_to_buf(buf, cpumask_bits(mask), - nr_cpu_ids, off, count); + nr_cpu_ids, off, count) - 1; } /** @@ -1018,7 +1019,7 @@ cpumap_print_list_to_buf(char *buf, const struct cpumask *mask, loff_t off, size_t count) { return bitmap_print_list_to_buf(buf, cpumask_bits(mask), - nr_cpu_ids, off, count); + nr_cpu_ids, off, count) - 1; } #if NR_CPUS <= BITS_PER_LONG -- cgit From d5f6545934c47e97c0b48a645418e877b452a992 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 20 Sep 2021 10:26:21 -0700 Subject: qnx4: work around gcc false positive warning bug In commit b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried to teach gcc about how the directory entry structure can be two different things depending on a status flag. It made the code clearer, and it seemed to make gcc happy. However, Arnd points to a gcc bug, where despite using two different members of a union, gcc then gets confused, and uses the size of one of the members to decide if a string overrun happens. And not necessarily the rigth one. End result: with some configurations, gcc-11 will still complain about the source buffer size being overread: fs/qnx4/dir.c: In function 'qnx4_readdir': fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread] 76 | size = strnlen(name, size); | ^~~~~~~~~~~~~~~~~~~ fs/qnx4/dir.c:26:22: note: source object declared here 26 | char de_name; | ^~~~~~~ because gcc will get confused about which union member entry is actually getting accessed, even when the source code is very clear about it. Gcc internally will have combined two "redundant" pointers (pointing to different union elements that are at the same offset), and takes the size checking from one or the other - not necessarily the right one. This is clearly a gcc bug, but we can work around it fairly easily. The biggest thing here is the big honking comment about why we do what we do. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6 Reported-and-tested-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- fs/qnx4/dir.c | 36 +++++++++++++++++++++++++++--------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/fs/qnx4/dir.c b/fs/qnx4/dir.c index 2a66844b7ff8..66645a5a35f3 100644 --- a/fs/qnx4/dir.c +++ b/fs/qnx4/dir.c @@ -20,12 +20,33 @@ * depending on the status field in the last byte. The * first byte is where the name start either way, and a * zero means it's empty. + * + * Also, due to a bug in gcc, we don't want to use the + * real (differently sized) name arrays in the inode and + * link entries, but always the 'de_name[]' one in the + * fake struct entry. + * + * See + * + * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6 + * + * for details, but basically gcc will take the size of the + * 'name' array from one of the used union entries randomly. + * + * This use of 'de_name[]' (48 bytes) avoids the false positive + * warnings that would happen if gcc decides to use 'inode.di_name' + * (16 bytes) even when the pointer and size were to come from + * 'link.dl_name' (48 bytes). + * + * In all cases the actual name pointer itself is the same, it's + * only the gcc internal 'what is the size of this field' logic + * that can get confused. */ union qnx4_directory_entry { struct { - char de_name; - char de_pad[62]; - char de_status; + const char de_name[48]; + u8 de_pad[15]; + u8 de_status; }; struct qnx4_inode_entry inode; struct qnx4_link_info link; @@ -53,29 +74,26 @@ static int qnx4_readdir(struct file *file, struct dir_context *ctx) ix = (ctx->pos >> QNX4_DIR_ENTRY_SIZE_BITS) % QNX4_INODES_PER_BLOCK; for (; ix < QNX4_INODES_PER_BLOCK; ix++, ctx->pos += QNX4_DIR_ENTRY_SIZE) { union qnx4_directory_entry *de; - const char *name; offset = ix * QNX4_DIR_ENTRY_SIZE; de = (union qnx4_directory_entry *) (bh->b_data + offset); - if (!de->de_name) + if (!de->de_name[0]) continue; if (!(de->de_status & (QNX4_FILE_USED|QNX4_FILE_LINK))) continue; if (!(de->de_status & QNX4_FILE_LINK)) { size = sizeof(de->inode.di_fname); - name = de->inode.di_fname; ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1; } else { size = sizeof(de->link.dl_fname); - name = de->link.dl_fname; ino = ( le32_to_cpu(de->link.dl_inode_blk) - 1 ) * QNX4_INODES_PER_BLOCK + de->link.dl_inode_ndx; } - size = strnlen(name, size); + size = strnlen(de->de_name, size); QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, name)); - if (!dir_emit(ctx, name, size, ino, DT_UNKNOWN)) { + if (!dir_emit(ctx, de->de_name, size, ino, DT_UNKNOWN)) { brelse(bh); return 0; } -- cgit From 7af526c740bdbd5b4dcebba04ace5b3b0c07801f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 14 Sep 2021 11:29:49 +0200 Subject: nvmem: NVMEM_NINTENDO_OTP should depend on WII The Nintendo Wii and Wii U OTP is only present on Nintendo Wii and Wii U consoles. Hence add a dependency on WII, to prevent asking the user about this driver when configuring a kernel without Nintendo Wii and Wii U console support. Fixes: 3683b761fe3a10ad ("nvmem: nintendo-otp: Add new driver for the Wii and Wii U OTP") Reviewed-by: Emmanuel Gil Peyrot Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/01318920709dddc4d85fe895e2083ca0eee234d8.1631611652.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index 39854d43758b..da414617a54d 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -109,6 +109,7 @@ config MTK_EFUSE config NVMEM_NINTENDO_OTP tristate "Nintendo Wii and Wii U OTP Support" + depends on WII || COMPILE_TEST help This is a driver exposing the OTP of a Nintendo Wii or Wii U console. -- cgit From 708c87168b6121abc74b2a57d0c498baaf70cbea Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Sep 2021 12:43:01 +0300 Subject: ceph: fix off by one bugs in unsafe_request_wait() The "> max" tests should be ">= max" to prevent an out of bounds access on the next lines. Fixes: e1a4541ec0b9 ("ceph: flush the mdlog before waiting on unsafe reqs") Signed-off-by: Dan Carpenter Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov --- fs/ceph/caps.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 6c0e52fd0743..3e42d0466521 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -2263,7 +2263,7 @@ retry: list_for_each_entry(req, &ci->i_unsafe_dirops, r_unsafe_dir_item) { s = req->r_session; - if (unlikely(s->s_mds > max)) { + if (unlikely(s->s_mds >= max)) { spin_unlock(&ci->i_unsafe_lock); goto retry; } @@ -2277,7 +2277,7 @@ retry: list_for_each_entry(req, &ci->i_unsafe_iops, r_unsafe_target_item) { s = req->r_session; - if (unlikely(s->s_mds > max)) { + if (unlikely(s->s_mds >= max)) { spin_unlock(&ci->i_unsafe_lock); goto retry; } -- cgit From bb509a6ffed2c8b0950f637ab5779aa818ed1596 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 16 Sep 2021 15:50:23 +0100 Subject: comedi: Fix memory leak in compat_insnlist() `compat_insnlist()` handles the 32-bit version of the `COMEDI_INSNLIST` ioctl (whenwhen `CONFIG_COMPAT` is enabled). It allocates memory to temporarily hold an array of `struct comedi_insn` converted from the 32-bit version in user space. This memory is only being freed if there is a fault while filling the array, otherwise it is leaked. Add a call to `kfree()` to fix the leak. Fixes: b8d47d881305 ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSNLIST compat") Cc: Al Viro Cc: Greg Kroah-Hartman Cc: linux-staging@lists.linux.dev Cc: # 5.13+ Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20210916145023.157479-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman --- drivers/comedi/comedi_fops.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/comedi/comedi_fops.c b/drivers/comedi/comedi_fops.c index df77b6bf5c64..763cea8418f8 100644 --- a/drivers/comedi/comedi_fops.c +++ b/drivers/comedi/comedi_fops.c @@ -3090,6 +3090,7 @@ static int compat_insnlist(struct file *file, unsigned long arg) mutex_lock(&dev->mutex); rc = do_insnlist_ioctl(dev, insns, insnlist32.n_insns, file); mutex_unlock(&dev->mutex); + kfree(insns); return rc; } -- cgit From 2de9d8e0d2fe3a1eb632def2245529067cb35db5 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:09:37 -0700 Subject: driver core: fw_devlink: Improve handling of cyclic dependencies When we have a dependency of the form: Device-A -> Device-C Device-B Device-C -> Device-B Where, * Indentation denotes "child of" parent in previous line. * X -> Y denotes X is consumer of Y based on firmware (Eg: DT). We have cyclic dependency: device-A -> device-C -> device-B -> device-A fw_devlink current treats device-C -> device-B dependency as an invalid dependency and doesn't enforce it but leaves the rest of the dependencies as is. While the current behavior is necessary, it is not sufficient if the false dependency in this example is actually device-A -> device-C. When this is the case, device-C will correctly probe defer waiting for device-B to be added, but device-A will be incorrectly probe deferred by fw_devlink waiting on device-C to probe successfully. Due to this, none of the devices in the cycle will end up probing. To fix this, we need to go relax all the dependencies in the cycle like we already do in the other instances where fw_devlink detects cycles. A real world example of this was reported[1] and analyzed[2]. [1] - https://lore.kernel.org/lkml/0a2c4106-7f48-2bb5-048e-8c001a7c3fda@samsung.com/ [2] - https://lore.kernel.org/lkml/CAGETcx8peaew90SWiux=TyvuGgvTQOmO4BFALz7aj0Za5QdNFQ@mail.gmail.com/ Fixes: f9aa460672c9 ("driver core: Refactor fw_devlink feature") Cc: stable Reported-by: Marek Szyprowski Tested-by: Marek Szyprowski Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915170940.617415-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index e65dd803a453..316df6027093 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1772,14 +1772,21 @@ static int fw_devlink_create_devlink(struct device *con, * be broken by applying logic. Check for these types of cycles and * break them so that devices in the cycle probe properly. * - * If the supplier's parent is dependent on the consumer, then - * the consumer-supplier dependency is a false dependency. So, - * treat it as an invalid link. + * If the supplier's parent is dependent on the consumer, then the + * consumer and supplier have a cyclic dependency. Since fw_devlink + * can't tell which of the inferred dependencies are incorrect, don't + * enforce probe ordering between any of the devices in this cyclic + * dependency. Do this by relaxing all the fw_devlink device links in + * this cycle and by treating the fwnode link between the consumer and + * the supplier as an invalid dependency. */ sup_dev = fwnode_get_next_parent_dev(sup_handle); if (sup_dev && device_is_dependent(con, sup_dev)) { - dev_dbg(con, "Not linking to %pfwP - False link\n", - sup_handle); + dev_info(con, "Fixing up cyclic dependency with %pfwP (%s)\n", + sup_handle, dev_name(sup_dev)); + device_links_write_lock(); + fw_devlink_relax_cycle(con, sup_dev); + device_links_write_unlock(); ret = -EINVAL; } else { /* -- cgit From cb1bcf5ed536747013fe2b3f9bd56ce3242c295a Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 20 Sep 2021 20:07:34 +0900 Subject: ALSA: firewire-motu: fix truncated bytes in message tracepoints In MOTU protocol v2/v3, first two data chunks across 2nd and 3rd data channels includes message bytes from device. The total size of message is 48 bits per data block. The 'data_block_message' tracepoints event produced by ALSA firewire-motu driver exposes the sequence of messages to userspace in 64 bit storage, however lower 32 bits are actually available since current implementation truncates 16 bits in upper of the message as a result of bit shift operation within 32 bit storage. This commit fixes the bug by perform the bit shift in 64 bit storage. Fixes: c6b0b9e65f09 ("ALSA: firewire-motu: add tracepoints for messages for unique protocol") Cc: Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20210920110734.27161-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai --- sound/firewire/motu/amdtp-motu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/firewire/motu/amdtp-motu.c b/sound/firewire/motu/amdtp-motu.c index 5388b85fb60e..a18c2c033e83 100644 --- a/sound/firewire/motu/amdtp-motu.c +++ b/sound/firewire/motu/amdtp-motu.c @@ -276,10 +276,11 @@ static void __maybe_unused copy_message(u64 *frames, __be32 *buffer, /* This is just for v2/v3 protocol. */ for (i = 0; i < data_blocks; ++i) { - *frames = (be32_to_cpu(buffer[1]) << 16) | - (be32_to_cpu(buffer[2]) >> 16); + *frames = be32_to_cpu(buffer[1]); + *frames <<= 16; + *frames |= be32_to_cpu(buffer[2]) >> 16; + ++frames; buffer += data_block_quadlets; - frames++; } } -- cgit From 0e3dbf765fe22060acbcb8eb8c4d256e655a1247 Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Mon, 20 Sep 2021 13:12:28 +0100 Subject: kselftest/arm64: signal: Skip tests if required features are missing During initialization of a signal testcase, features declared as required are properly checked against the running system but no action is then taken to effectively skip such a testcase. Fix core signals test logic to abort initialization and report such a testcase as skipped to the KSelfTest framework. Fixes: f96bf4340316 ("kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils") Signed-off-by: Cristian Marussi Reviewed-by: Mark Brown Link: https://lore.kernel.org/r/20210920121228.35368-1-cristian.marussi@arm.com Signed-off-by: Catalin Marinas --- tools/testing/selftests/arm64/signal/test_signals_utils.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/arm64/signal/test_signals_utils.c b/tools/testing/selftests/arm64/signal/test_signals_utils.c index 6836510a522f..22722abc9dfa 100644 --- a/tools/testing/selftests/arm64/signal/test_signals_utils.c +++ b/tools/testing/selftests/arm64/signal/test_signals_utils.c @@ -266,16 +266,19 @@ int test_init(struct tdescr *td) td->feats_supported |= FEAT_SSBS; if (getauxval(AT_HWCAP) & HWCAP_SVE) td->feats_supported |= FEAT_SVE; - if (feats_ok(td)) + if (feats_ok(td)) { fprintf(stderr, "Required Features: [%s] supported\n", feats_to_string(td->feats_required & td->feats_supported)); - else + } else { fprintf(stderr, "Required Features: [%s] NOT supported\n", feats_to_string(td->feats_required & ~td->feats_supported)); + td->result = KSFT_SKIP; + return 0; + } } /* Perform test specific additional initialization */ -- cgit From e44fd5081c50b0ffdb75ce6c83452e60173d791b Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 20 Sep 2021 19:01:42 -0500 Subject: ksmbd: log that server is experimental at module load While we are working through detailed security reviews of ksmbd server code we should remind users that it is an experimental module by adding a warning when the module loads. Currently the module shows as experimental in Kconfig and is disabled by default, but we don't want to confuse users. Although ksmbd passes a wide variety of the important functional tests (since initial focus had been largely on functional testing such as smbtorture, xfstests etc.), and ksmbd has added key security features (e.g. GCM256 encryption, Kerberos support), there are ongoing detailed reviews of the code base for path processing and network buffer decoding, and this patch reminds users that the module should be considered "experimental." Reviewed-by: Namjae Jeon Reviewed-by: Paulo Alcantara (SUSE) Reviewed-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/ksmbd/server.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/ksmbd/server.c b/fs/ksmbd/server.c index e6a9f6aa47eb..2a2b2135bfde 100644 --- a/fs/ksmbd/server.c +++ b/fs/ksmbd/server.c @@ -584,6 +584,9 @@ static int __init ksmbd_server_init(void) ret = ksmbd_workqueue_init(); if (ret) goto err_crypto_destroy; + + pr_warn_once("The ksmbd server is experimental, use at your own risk.\n"); + return 0; err_crypto_destroy: -- cgit From 9f6323311c7064414bfd1edb28e0837baf6b3c7f Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 18 Sep 2021 21:02:39 +0900 Subject: ksmbd: add default data stream name in FILE_STREAM_INFORMATION Windows client expect to get default stream name(::DATA) in FILE_STREAM_INFORMATION response even if there is no stream data in file. This patch fix update failure when writing ppt or doc files. Signed-off-by: Namjae Jeon Reviewed-By: Tom Talpey Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 6304c9bda479..f59f9b8be51c 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -4428,17 +4428,15 @@ static void get_file_stream_info(struct ksmbd_work *work, file_info->NextEntryOffset = cpu_to_le32(next); } - if (nbytes) { + if (!S_ISDIR(stat.mode)) { file_info = (struct smb2_file_stream_info *) &rsp->Buffer[nbytes]; streamlen = smbConvertToUTF16((__le16 *)file_info->StreamName, "::$DATA", 7, conn->local_nls, 0); streamlen *= 2; file_info->StreamNameLength = cpu_to_le32(streamlen); - file_info->StreamSize = S_ISDIR(stat.mode) ? 0 : - cpu_to_le64(stat.size); - file_info->StreamAllocationSize = S_ISDIR(stat.mode) ? 0 : - cpu_to_le64(stat.size); + file_info->StreamSize = 0; + file_info->StreamAllocationSize = 0; nbytes += sizeof(struct smb2_file_stream_info) + streamlen; } -- cgit From 96c8395e2166efa86082f3b71567ffd84936439b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 21 Sep 2021 15:44:06 +0100 Subject: spi: Revert modalias changes During the v5.13 cycle we updated the SPI subsystem to generate OF style modaliases for SPI devices, replacing the old Linux style modalises we used to generate based on spi_device_id which are the DT style name with the vendor removed. Unfortunately this means that we start only reporting OF style modalises and not the old ones and there is nothing that ensures that drivers list every possible OF compatible string in their OF ID table. The result is that there are systems which have been relying on loading modules based on the old style that are now broken, as found by Russell King with spi-nor on Macchiatobin. spi-nor is a particularly problematic case for this, it only lists a single generic DT compatible jedec,spi-nor in the driver but supports a huge raft of device specific compatibles, with a large set of part numbers many of which are offered by multiple vendors. Russell's searches of upstream device trees has turned up examples with vendor names written in non-standard ways too. To make matters worse up until 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding") the generic compatible was not part of the binding so there are device trees out there written to that binding version which don't list it all. The sheer number of parts supported together with our previous approach of ignoring the vendor ID makes robustly fixing this by adding compatibles to the spi-nor driver seem problematic, the current DT binding document does not list all the parts supported by the driver at the minute (further patches will fix this). I've also investigated supporting both formats of modalias simultaneously but that doesn't seem possible, especially without breaking our userspace ABI which is obviously not viable. Instead revert the relevant changes for now: e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support") 3ce6c9e2617e ("spi: add of_device_uevent_modalias support") This will unfortunately mean that any system which had started having modules autoload based on the OF compatibles for drivers that list things there but not in the spi_device_ids will now not have those modules load which is itself a regression. Since it affects a narrower time window and the particularly problematic spi-nor driver may be critical to system boot on smaller systems this seems the best of a series of bad options. I will start an audit of SPI drivers to identify and fix cases where things won't autoload using spi_device_id, this is not great but seems to be the best way forward that anyone has been able to identify. Thanks to Russell for both his report and the additional diagnostic and analysis work he has done here, the detailed research above was his work. Fixes: e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support") Fixes: 3ce6c9e2617e ("spi: add of_device_uevent_modalias support") Reported-by: Russell King (Oracle) Suggested-by: Russell King (Oracle) Signed-off-by: Mark Brown Tested-by: Russell King (Oracle) Cc: Andreas Schwab Cc: Marco Felsch --- drivers/spi/spi.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 57e2499ec1ed..aea037c65985 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -58,10 +58,6 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf) const struct spi_device *spi = to_spi_device(dev); int len; - len = of_device_modalias(dev, buf, PAGE_SIZE); - if (len != -ENODEV) - return len; - len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1); if (len != -ENODEV) return len; @@ -367,10 +363,6 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env) const struct spi_device *spi = to_spi_device(dev); int rc; - rc = of_device_uevent_modalias(dev, env); - if (rc != -ENODEV) - return rc; - rc = acpi_device_uevent_modalias(dev, env); if (rc != -ENODEV) return rc; -- cgit From e946d3c887a9dc33aa82a349c6284f4a084163f4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Sep 2021 23:33:35 +0300 Subject: cifs: fix a sign extension bug The problem is the mismatched types between "ctx->total_len" which is an unsigned int, "rc" which is an int, and "ctx->rc" which is a ssize_t. The code does: ctx->rc = (rc == 0) ? ctx->total_len : rc; We want "ctx->rc" to store the negative "rc" error code. But what happens is that "rc" is type promoted to a high unsigned int and 'ctx->rc" will store the high positive value instead of a negative value. The fix is to change "rc" from an int to a ssize_t. Fixes: c610c4b619e5 ("CIFS: Add asynchronous write support through kernel AIO") Signed-off-by: Dan Carpenter Signed-off-by: Steve French --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 6796fc73b304..0ab5bb24b8ca 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -3113,7 +3113,7 @@ static void collect_uncached_write_data(struct cifs_aio_ctx *ctx) struct cifs_tcon *tcon; struct cifs_sb_info *cifs_sb; struct dentry *dentry = ctx->cfile->dentry; - int rc; + ssize_t rc; tcon = tlink_tcon(ctx->cfile->tlink); cifs_sb = CIFS_SB(dentry->d_sb); -- cgit From 248f064af222a1f97ee02c84a98013dfbccad386 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Tue, 21 Sep 2021 16:52:15 +0200 Subject: s390/qeth: fix NULL deref in qeth_clear_working_pool_list() When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Fixes: eff73e16ee11 ("s390/qeth: tolerate pre-filled RX buffer") Reported-by: Stefan Raspl Root-caused-by: Heiko Carstens Signed-off-by: Julian Wiedmann Reviewed-by: Alexandra Winter Signed-off-by: Jakub Kicinski --- drivers/s390/net/qeth_core_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 41ca6273b750..3fba440a0731 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -202,6 +202,9 @@ static void qeth_clear_working_pool_list(struct qeth_card *card) &card->qdio.in_buf_pool.entry_list, list) list_del(&pool_entry->list); + if (!queue) + return; + for (i = 0; i < ARRAY_SIZE(queue->bufs); i++) queue->bufs[i].pool_entry = NULL; } -- cgit From ee909d0b1dac8632eeb78cbf17661d6c7674bbd0 Mon Sep 17 00:00:00 2001 From: Alexandra Winter Date: Tue, 21 Sep 2021 16:52:16 +0200 Subject: s390/qeth: Fix deadlock in remove_discipline Problem: qeth_close_dev_handler is a worker that tries to acquire card->discipline_mutex via drv->set_offline() in ccwgroup_set_offline(). Since commit b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") qeth_remove_discipline() is called under card->discipline_mutex and cancels the work and waits for it to finish. STOPLAN reception with reason code IPA_RC_VEPA_TO_VEB_TRANSITION is the only situation that schedules close_dev_work. In that situation scheduling qeth recovery will also result in an offline interface, when resetting the isolation mode fails, if the external switch is still set to VEB. And since commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") qeth recovery does not aquire card->discipline_mutex anymore. So we accept the longer pathlength of qeth_schedule_recovery in this error situation and re-use the existing function. As a side-benefit this changes the hwtrap to behave like during recovery instead of like during a user-triggered set_offline. Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") Signed-off-by: Alexandra Winter Acked-by: Julian Wiedmann Signed-off-by: Julian Wiedmann Signed-off-by: Jakub Kicinski --- drivers/s390/net/qeth_core.h | 1 - drivers/s390/net/qeth_core_main.c | 16 ++++------------ drivers/s390/net/qeth_l2_main.c | 1 - drivers/s390/net/qeth_l3_main.c | 1 - 4 files changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 535a60b3946d..a5aa0bdc61d6 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -858,7 +858,6 @@ struct qeth_card { struct napi_struct napi; struct qeth_rx rx; struct delayed_work buffer_reclaim_work; - struct work_struct close_dev_work; }; static inline bool qeth_card_hw_is_reachable(struct qeth_card *card) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 3fba440a0731..9f26706051e5 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -70,15 +70,6 @@ static void qeth_issue_next_read_cb(struct qeth_card *card, static int qeth_qdio_establish(struct qeth_card *); static void qeth_free_qdio_queues(struct qeth_card *card); -static void qeth_close_dev_handler(struct work_struct *work) -{ - struct qeth_card *card; - - card = container_of(work, struct qeth_card, close_dev_work); - QETH_CARD_TEXT(card, 2, "cldevhdl"); - ccwgroup_set_offline(card->gdev); -} - static const char *qeth_get_cardname(struct qeth_card *card) { if (IS_VM_NIC(card)) { @@ -795,10 +786,12 @@ static struct qeth_ipa_cmd *qeth_check_ipa_data(struct qeth_card *card, case IPA_CMD_STOPLAN: if (cmd->hdr.return_code == IPA_RC_VEPA_TO_VEB_TRANSITION) { dev_err(&card->gdev->dev, - "Interface %s is down because the adjacent port is no longer in reflective relay mode\n", + "Adjacent port of interface %s is no longer in reflective relay mode, trigger recovery\n", netdev_name(card->dev)); - schedule_work(&card->close_dev_work); + /* Set offline, then probably fail to set online: */ + qeth_schedule_recovery(card); } else { + /* stay online for subsequent STARTLAN */ dev_warn(&card->gdev->dev, "The link for interface %s on CHPID 0x%X failed\n", netdev_name(card->dev), card->info.chpid); @@ -1540,7 +1533,6 @@ static void qeth_setup_card(struct qeth_card *card) INIT_LIST_HEAD(&card->ipato.entries); qeth_init_qdio_info(card); INIT_DELAYED_WORK(&card->buffer_reclaim_work, qeth_buffer_reclaim_work); - INIT_WORK(&card->close_dev_work, qeth_close_dev_handler); hash_init(card->rx_mode_addrs); hash_init(card->local_addrs4); hash_init(card->local_addrs6); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 72e84ff9fea5..dc6c00768d91 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -2307,7 +2307,6 @@ static void qeth_l2_remove_device(struct ccwgroup_device *gdev) if (gdev->state == CCWGROUP_ONLINE) qeth_set_offline(card, card->discipline, false); - cancel_work_sync(&card->close_dev_work); if (card->dev->reg_state == NETREG_REGISTERED) { priv = netdev_priv(card->dev); if (priv->brport_features & BR_LEARNING_SYNC) { diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 3a523e700a5a..6fd3e288f059 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -1969,7 +1969,6 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev) if (cgdev->state == CCWGROUP_ONLINE) qeth_set_offline(card, card->discipline, false); - cancel_work_sync(&card->close_dev_work); if (card->dev->reg_state == NETREG_REGISTERED) unregister_netdev(card->dev); -- cgit From d2b59bd4b06d84a4eadb520b0f71c62fe8ec0a62 Mon Sep 17 00:00:00 2001 From: Alexandra Winter Date: Tue, 21 Sep 2021 16:52:17 +0200 Subject: s390/qeth: fix deadlock during failing recovery Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed taking discipline_mutex inside qeth_do_reset(), fixing potential deadlocks. An error path was missed though, that still takes discipline_mutex and thus has the original deadlock potential. Intermittent deadlocks were seen when a qeth channel path is configured offline, causing a race between qeth_do_reset and ccwgroup_remove. Call qeth_set_offline() directly in the qeth_do_reset() error case and then a new variant of ccwgroup_set_offline(), without taking discipline_mutex. Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") Signed-off-by: Alexandra Winter Reviewed-by: Julian Wiedmann Signed-off-by: Julian Wiedmann Signed-off-by: Jakub Kicinski --- arch/s390/include/asm/ccwgroup.h | 2 +- drivers/s390/cio/ccwgroup.c | 10 ++++++++-- drivers/s390/net/qeth_core_main.c | 3 ++- 3 files changed, 11 insertions(+), 4 deletions(-) diff --git a/arch/s390/include/asm/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h index 36dbf5043fc0..aa995d91cd1d 100644 --- a/arch/s390/include/asm/ccwgroup.h +++ b/arch/s390/include/asm/ccwgroup.h @@ -55,7 +55,7 @@ int ccwgroup_create_dev(struct device *root, struct ccwgroup_driver *gdrv, int num_devices, const char *buf); extern int ccwgroup_set_online(struct ccwgroup_device *gdev); -extern int ccwgroup_set_offline(struct ccwgroup_device *gdev); +int ccwgroup_set_offline(struct ccwgroup_device *gdev, bool call_gdrv); extern int ccwgroup_probe_ccwdev(struct ccw_device *cdev); extern void ccwgroup_remove_ccwdev(struct ccw_device *cdev); diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c index 2ec741106cb6..f0538609dfe4 100644 --- a/drivers/s390/cio/ccwgroup.c +++ b/drivers/s390/cio/ccwgroup.c @@ -77,12 +77,13 @@ EXPORT_SYMBOL(ccwgroup_set_online); /** * ccwgroup_set_offline() - disable a ccwgroup device * @gdev: target ccwgroup device + * @call_gdrv: Call the registered gdrv set_offline function * * This function attempts to put the ccwgroup device into the offline state. * Returns: * %0 on success and a negative error value on failure. */ -int ccwgroup_set_offline(struct ccwgroup_device *gdev) +int ccwgroup_set_offline(struct ccwgroup_device *gdev, bool call_gdrv) { struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver); int ret = -EINVAL; @@ -91,11 +92,16 @@ int ccwgroup_set_offline(struct ccwgroup_device *gdev) return -EAGAIN; if (gdev->state == CCWGROUP_OFFLINE) goto out; + if (!call_gdrv) { + ret = 0; + goto offline; + } if (gdrv->set_offline) ret = gdrv->set_offline(gdev); if (ret) goto out; +offline: gdev->state = CCWGROUP_OFFLINE; out: atomic_set(&gdev->onoff, 0); @@ -124,7 +130,7 @@ static ssize_t ccwgroup_online_store(struct device *dev, if (value == 1) ret = ccwgroup_set_online(gdev); else if (value == 0) - ret = ccwgroup_set_offline(gdev); + ret = ccwgroup_set_offline(gdev, true); else ret = -EINVAL; out: diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 9f26706051e5..e9807d2996a9 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5514,7 +5514,8 @@ static int qeth_do_reset(void *data) dev_info(&card->gdev->dev, "Device successfully recovered!\n"); } else { - ccwgroup_set_offline(card->gdev); + qeth_set_offline(card, disc, true); + ccwgroup_set_offline(card->gdev, false); dev_warn(&card->gdev->dev, "The qeth device driver failed to recover an error on the device\n"); } -- cgit From 88b099006d83b0bf452379cad4ce494329084726 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 17 Sep 2021 17:43:49 +0300 Subject: scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling" This reverts commit a113eaaf86373362b053279049907ff82b5df6c8. There are a couple of issues with the commit: 1. It causes deadlocks. 2. It causes the shost->eh_cmd_q list of failed requests not to be processed, ever. So revert it. 1. Deadlocks The SCSI error handler runs with requests blocked beginning when scsi_schedule_eh() sets SHOST_RECOVERY state, continuing through scsi_error_handler() callback ->eh_strategy_handler() until scsi_restart_operations() is called. By setting eh_strategy_handler to ufshcd_err_handler, the patch changed the UFS error handler to run with requests blocked, including PM requests, for the entire run of the error handler. That conflicts with UFS error handler existing synchronization with UFS device PM operations. The UFS error handler synchronizes with runtime PM by doing pm_runtime_get_sync() prior to blocking requests itself. It synchronizes with system PM by use of hba->host_sem, again before blocking requests itself. However, if requests are already blocked, then PM operations will block. So: the UFS error handler blocks waiting on PM + PM blocks waiting on SCSI PM requests to process or fail + PM requests are blocked waiting on error handling to finish = deadlock This happens both for runtime PM and system PM. Prior to the patch, these deadlocks could not happen even if SCSI error handling was running, because the presence of requests in shost->eh_cmd_q would mean the queues could not be suspended, which would mean that, should the UFS error handler run at the same time, it would not need to wait for PM or vice versa. Please note these scenarios are not just theoretical, they were found during testing on a Samsung Galaxy Book S. 2. ->eh_strategy_handler() must process shost->eh_cmd_q list of failed requests, as all other eh_strategy_handler's do except UFS error handler. Refer for example: scsi_unjam_host(), ata_scsi_error() and sas_scsi_recover_host(). Link: https://lore.kernel.org/r/20210917144349.14058-1-adrian.hunter@intel.com Fixes: a113eaaf8637 ("scsi: ufs: Synchronize SCSI and UFS error handling") Reviewed-by: Bart Van Assche Signed-off-by: Adrian Hunter Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 111 ++++++++++++++++++++++------------------------ drivers/scsi/ufs/ufshcd.h | 4 ++ 2 files changed, 58 insertions(+), 57 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 67889d74761c..a3df5804b2c7 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -17,8 +17,6 @@ #include #include #include -#include -#include "../scsi_transport_api.h" #include "ufshcd.h" #include "ufs_quirks.h" #include "unipro.h" @@ -237,6 +235,7 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up); static irqreturn_t ufshcd_intr(int irq, void *__hba); static int ufshcd_change_power_mode(struct ufs_hba *hba, struct ufs_pa_layer_attr *pwr_mode); +static void ufshcd_schedule_eh_work(struct ufs_hba *hba); static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on); static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on); static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba, @@ -2759,8 +2758,13 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) out: up_read(&hba->clk_scaling_lock); - if (ufs_trigger_eh()) - scsi_schedule_eh(hba->host); + if (ufs_trigger_eh()) { + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_schedule_eh_work(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + } return err; } @@ -3919,35 +3923,6 @@ out: } EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr); -static inline bool ufshcd_is_saved_err_fatal(struct ufs_hba *hba) -{ - lockdep_assert_held(hba->host->host_lock); - - return (hba->saved_uic_err & UFSHCD_UIC_DL_PA_INIT_ERROR) || - (hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)); -} - -static void ufshcd_schedule_eh(struct ufs_hba *hba) -{ - bool schedule_eh = false; - unsigned long flags; - - spin_lock_irqsave(hba->host->host_lock, flags); - /* handle fatal errors only when link is not in error state */ - if (hba->ufshcd_state != UFSHCD_STATE_ERROR) { - if (hba->force_reset || ufshcd_is_link_broken(hba) || - ufshcd_is_saved_err_fatal(hba)) - hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_FATAL; - else - hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_NON_FATAL; - schedule_eh = true; - } - spin_unlock_irqrestore(hba->host->host_lock, flags); - - if (schedule_eh) - scsi_schedule_eh(hba->host); -} - /** * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power * state) and waits for it to take effect. @@ -3968,7 +3943,6 @@ static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd) { DECLARE_COMPLETION_ONSTACK(uic_async_done); unsigned long flags; - bool schedule_eh = false; u8 status; int ret; bool reenable_intr = false; @@ -4038,14 +4012,10 @@ out: ufshcd_enable_intr(hba, UIC_COMMAND_COMPL); if (ret) { ufshcd_set_link_broken(hba); - schedule_eh = true; + ufshcd_schedule_eh_work(hba); } - out_unlock: spin_unlock_irqrestore(hba->host->host_lock, flags); - - if (schedule_eh) - ufshcd_schedule_eh(hba); mutex_unlock(&hba->uic_cmd_mutex); return ret; @@ -5911,6 +5881,27 @@ out: return err_handling; } +/* host lock must be held before calling this func */ +static inline bool ufshcd_is_saved_err_fatal(struct ufs_hba *hba) +{ + return (hba->saved_uic_err & UFSHCD_UIC_DL_PA_INIT_ERROR) || + (hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)); +} + +/* host lock must be held before calling this func */ +static inline void ufshcd_schedule_eh_work(struct ufs_hba *hba) +{ + /* handle fatal errors only when link is not in error state */ + if (hba->ufshcd_state != UFSHCD_STATE_ERROR) { + if (hba->force_reset || ufshcd_is_link_broken(hba) || + ufshcd_is_saved_err_fatal(hba)) + hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_FATAL; + else + hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_NON_FATAL; + queue_work(hba->eh_wq, &hba->eh_work); + } +} + static void ufshcd_clk_scaling_allow(struct ufs_hba *hba, bool allow) { down_write(&hba->clk_scaling_lock); @@ -6044,11 +6035,11 @@ static bool ufshcd_is_pwr_mode_restore_needed(struct ufs_hba *hba) /** * ufshcd_err_handler - handle UFS errors that require s/w attention - * @host: SCSI host pointer + * @work: pointer to work structure */ -static void ufshcd_err_handler(struct Scsi_Host *host) +static void ufshcd_err_handler(struct work_struct *work) { - struct ufs_hba *hba = shost_priv(host); + struct ufs_hba *hba; unsigned long flags; bool err_xfer = false; bool err_tm = false; @@ -6056,9 +6047,10 @@ static void ufshcd_err_handler(struct Scsi_Host *host) int tag; bool needs_reset = false, needs_restore = false; + hba = container_of(work, struct ufs_hba, eh_work); + down(&hba->host_sem); spin_lock_irqsave(hba->host->host_lock, flags); - hba->host->host_eh_scheduled = 0; if (ufshcd_err_handling_should_stop(hba)) { if (hba->ufshcd_state != UFSHCD_STATE_ERROR) hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; @@ -6371,6 +6363,7 @@ static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba, u32 intr_status) "host_regs: "); ufshcd_print_pwr_info(hba); } + ufshcd_schedule_eh_work(hba); retval |= IRQ_HANDLED; } /* @@ -6382,10 +6375,6 @@ static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba, u32 intr_status) hba->errors = 0; hba->uic_error = 0; spin_unlock(hba->host->host_lock); - - if (queue_eh_work) - ufshcd_schedule_eh(hba); - return retval; } @@ -7048,17 +7037,15 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) * will be to send LU reset which, again, is a spec violation. * To avoid these unnecessary/illegal steps, first we clean up * the lrb taken by this cmd and re-set it in outstanding_reqs, - * then queue the error handler and bail. + * then queue the eh_work and bail. */ if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN) { ufshcd_update_evt_hist(hba, UFS_EVT_ABORT, lrbp->lun); spin_lock_irqsave(host->host_lock, flags); hba->force_reset = true; + ufshcd_schedule_eh_work(hba); spin_unlock_irqrestore(host->host_lock, flags); - - ufshcd_schedule_eh(hba); - goto release; } @@ -7191,10 +7178,11 @@ static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd) spin_lock_irqsave(hba->host->host_lock, flags); hba->force_reset = true; + ufshcd_schedule_eh_work(hba); dev_err(hba->dev, "%s: reset in progress - 1\n", __func__); spin_unlock_irqrestore(hba->host->host_lock, flags); - ufshcd_err_handler(hba->host); + flush_work(&hba->eh_work); spin_lock_irqsave(hba->host->host_lock, flags); if (hba->ufshcd_state == UFSHCD_STATE_ERROR) @@ -8604,6 +8592,8 @@ static void ufshcd_hba_exit(struct ufs_hba *hba) if (hba->is_powered) { ufshcd_exit_clk_scaling(hba); ufshcd_exit_clk_gating(hba); + if (hba->eh_wq) + destroy_workqueue(hba->eh_wq); ufs_debugfs_hba_exit(hba); ufshcd_variant_hba_exit(hba); ufshcd_setup_vreg(hba, false); @@ -9448,10 +9438,6 @@ static int ufshcd_set_dma_mask(struct ufs_hba *hba) return dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(32)); } -static struct scsi_transport_template ufshcd_transport_template = { - .eh_strategy_handler = ufshcd_err_handler, -}; - /** * ufshcd_alloc_host - allocate Host Bus Adapter (HBA) * @dev: pointer to device handle @@ -9478,7 +9464,6 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) err = -ENOMEM; goto out_error; } - host->transportt = &ufshcd_transport_template; hba = shost_priv(host); hba->host = host; hba->dev = dev; @@ -9518,6 +9503,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) int err; struct Scsi_Host *host = hba->host; struct device *dev = hba->dev; + char eh_wq_name[sizeof("ufs_eh_wq_00")]; if (!mmio_base) { dev_err(hba->dev, @@ -9571,6 +9557,17 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) hba->max_pwr_info.is_valid = false; + /* Initialize work queues */ + snprintf(eh_wq_name, sizeof(eh_wq_name), "ufs_eh_wq_%d", + hba->host->host_no); + hba->eh_wq = create_singlethread_workqueue(eh_wq_name); + if (!hba->eh_wq) { + dev_err(hba->dev, "%s: failed to create eh workqueue\n", + __func__); + err = -ENOMEM; + goto out_disable; + } + INIT_WORK(&hba->eh_work, ufshcd_err_handler); INIT_WORK(&hba->eeh_work, ufshcd_exception_event_handler); sema_init(&hba->host_sem, 1); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 4723f27a55d1..f0da5d3db1fa 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -741,6 +741,8 @@ struct ufs_hba_monitor { * @is_powered: flag to check if HBA is powered * @shutting_down: flag to check if shutdown has been invoked * @host_sem: semaphore used to serialize concurrent contexts + * @eh_wq: Workqueue that eh_work works on + * @eh_work: Worker to handle UFS errors that require s/w attention * @eeh_work: Worker to handle exception events * @errors: HBA errors * @uic_error: UFS interconnect layer error status @@ -843,6 +845,8 @@ struct ufs_hba { struct semaphore host_sem; /* Work Queues */ + struct workqueue_struct *eh_wq; + struct work_struct eh_work; struct work_struct eeh_work; /* HBA Errors */ -- cgit From 1d479e6c9cb2b40abfb455863a4e9335db882e33 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 17 Sep 2021 14:23:14 -0700 Subject: scsi: sd_zbc: Support disks with more than 2**32 logical blocks This patch addresses the following Coverity report about the zno * sdkp->zone_blocks expression: CID 1475514 (#1 of 1): Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN) overflow_before_widen: Potentially overflowing expression zno * sdkp->zone_blocks with type unsigned int (32 bits, unsigned) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type sector_t (64 bits, unsigned). Link: https://lore.kernel.org/r/20210917212314.2362324-1-bvanassche@acm.org Fixes: 5795eb443060 ("scsi: sd_zbc: emulate ZONE_APPEND commands") Cc: Johannes Thumshirn Cc: Damien Le Moal Cc: Hannes Reinecke Reviewed-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Reviewed-by: Himanshu Madhani Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sd_zbc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index 8197d31a81f9..ed06798983f8 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -280,7 +280,7 @@ static void sd_zbc_update_wp_offset_workfn(struct work_struct *work) { struct scsi_disk *sdkp; unsigned long flags; - unsigned int zno; + sector_t zno; int ret; sdkp = container_of(work, struct scsi_disk, zone_wp_offset_work); -- cgit From d04a968c33684b15d1206e23fc1119ce0f0587fb Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Thu, 16 Sep 2021 10:54:04 -0700 Subject: scsi: ufs: core: Unbreak the reset handler A command tag is passed as the second argument of the __ufshcd_transfer_req_compl() call in ufshcd_eh_device_reset_handler() instead of a bitmask. Fix this by passing a bitmask as argument instead of a command tag. Link: https://lore.kernel.org/r/20210916175408.2260084-1-bvanassche@acm.org Fixes: a45f937110fa ("scsi: ufs: Optimize host lock on transfer requests send/compl paths") Cc: Can Guo Reviewed-by: Avri Altman Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index a3df5804b2c7..029c9631ec2b 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -6865,7 +6865,7 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) err = ufshcd_clear_cmd(hba, pos); if (err) break; - __ufshcd_transfer_req_compl(hba, pos, /*retry_requests=*/true); + __ufshcd_transfer_req_compl(hba, 1U << pos, false); } } -- cgit From 5f8579038842d77e6ce05e1df6bf9dd493b0e3ef Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Wed, 15 Sep 2021 18:32:39 +0300 Subject: scsi: qla2xxx: Restore initiator in dual mode In dual mode in case of disabling the target, the whole port goes offline and initiator is turned off too. Fix restoring initiator mode after disabling target in dual mode. Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port") Reviewed-by: Himanshu Madhani Signed-off-by: Dmitry Bogdanov Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 1e4e3e83b5c7..5fc7697f0af4 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -7169,7 +7169,8 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) return 0; break; case QLA2XXX_INI_MODE_DUAL: - if (!qla_dual_mode_enabled(vha)) + if (!qla_dual_mode_enabled(vha) && + !qla_ini_mode_enabled(vha)) return 0; break; case QLA2XXX_INI_MODE_ENABLED: -- cgit From bc41fcbffd5759c9610f7de211420eae6b379503 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 15 Sep 2021 17:07:13 +0800 Subject: scsi: fas216: Kill scmd->tag The driver is attempting to allocate a tag internally which is a no-go with blk-mq. Switch the driver to use the request tag and kill usage of scmd->tag and scmd->device->current_tag. [jpg: Change to use scsi_cmd_to_rq()] Link: https://lore.kernel.org/r/1631696835-136198-2-git-send-email-john.garry@huawei.com Signed-off-by: Hannes Reinecke Signed-off-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/arm/fas216.c | 31 ++++++++----------------------- 1 file changed, 8 insertions(+), 23 deletions(-) diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index 9c4458a99025..cf71ef488e36 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -77,7 +77,6 @@ * I was thinking that this was a good chip until I found this restriction ;( */ #define SCSI2_SYNC -#undef SCSI2_TAG #undef DEBUG_CONNECT #undef DEBUG_MESSAGES @@ -990,7 +989,7 @@ fas216_reselected_intr(FAS216_Info *info) info->scsi.disconnectable = 0; if (info->SCpnt->device->id == target && info->SCpnt->device->lun == lun && - info->SCpnt->tag == tag) { + scsi_cmd_to_rq(info->SCpnt)->tag == tag) { fas216_log(info, LOG_CONNECT, "reconnected previously executing command"); } else { queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt); @@ -1791,8 +1790,9 @@ static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt) /* * add tag message if required */ - if (SCpnt->tag) - msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, SCpnt->tag); + if (SCpnt->device->simple_tags) + msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, + scsi_cmd_to_rq(SCpnt)->tag); do { #ifdef SCSI2_SYNC @@ -1815,20 +1815,8 @@ static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt) static void fas216_allocate_tag(FAS216_Info *info, struct scsi_cmnd *SCpnt) { -#ifdef SCSI2_TAG - /* - * tagged queuing - allocate a new tag to this command - */ - if (SCpnt->device->simple_tags && SCpnt->cmnd[0] != REQUEST_SENSE && - SCpnt->cmnd[0] != INQUIRY) { - SCpnt->device->current_tag += 1; - if (SCpnt->device->current_tag == 0) - SCpnt->device->current_tag = 1; - SCpnt->tag = SCpnt->device->current_tag; - } else -#endif - set_bit(SCpnt->device->id * 8 + - (u8)(SCpnt->device->lun & 0x7), info->busyluns); + set_bit(SCpnt->device->id * 8 + + (u8)(SCpnt->device->lun & 0x7), info->busyluns); info->stats.removes += 1; switch (SCpnt->cmnd[0]) { @@ -2117,7 +2105,6 @@ request_sense: init_SCp(SCpnt); SCpnt->SCp.Message = 0; SCpnt->SCp.Status = 0; - SCpnt->tag = 0; SCpnt->host_scribble = (void *)fas216_rq_sns_done; /* @@ -2223,7 +2210,6 @@ static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt, init_SCp(SCpnt); info->stats.queues += 1; - SCpnt->tag = 0; spin_lock(&info->host_lock); @@ -3003,9 +2989,8 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m) dev = &info->device[scd->id]; seq_printf(m, " %d/%llu ", scd->id, scd->lun); if (scd->tagged_supported) - seq_printf(m, "%3sabled(%3d) ", - scd->simple_tags ? "en" : "dis", - scd->current_tag); + seq_printf(m, "%3sabled ", + scd->simple_tags ? "en" : "dis"); else seq_puts(m, "unsupported "); -- cgit From 756fb6a895afbf1f0615d93ebdd14863a00b1198 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 15 Sep 2021 17:07:14 +0800 Subject: scsi: acornscsi: Remove tagged queuing vestiges The acornscsi driver has a config option to enable tagged queuing, but this option gets disabled in the driver itself with the comment 'needs to be debugged'. As this is a _really_ old driver I doubt anyone will be wanting to invest time here, so remove the tagged queue vestiges and make our lives easier. [jpg: Use scsi_cmd_to_rq()] Link: https://lore.kernel.org/r/1631696835-136198-3-git-send-email-john.garry@huawei.com Signed-off-by: Hannes Reinecke Signed-off-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/arm/Kconfig | 11 ----- drivers/scsi/arm/acornscsi.c | 103 +++++++++---------------------------------- drivers/scsi/arm/queue.c | 2 +- 3 files changed, 23 insertions(+), 93 deletions(-) diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index f34badc75196..9f64133f976a 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -10,17 +10,6 @@ config SCSI_ACORNSCSI_3 This enables support for the Acorn SCSI card (aka30). If you have an Acorn system with one of these, say Y. If unsure, say N. -config SCSI_ACORNSCSI_TAGGED_QUEUE - bool "Support SCSI 2 Tagged queueing" - depends on SCSI_ACORNSCSI_3 - help - Say Y here to enable tagged queuing support on the Acorn SCSI card. - - This is a feature of SCSI-2 which improves performance: the host - adapter can send several SCSI commands to a device's queue even if - previous commands haven't finished yet. Some SCSI devices don't - implement this properly, so the safe answer is N. - config SCSI_ACORNSCSI_SYNC bool "Support SCSI 2 Synchronous Transfers" depends on SCSI_ACORNSCSI_3 diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index 4a84599ff491..b4cb5fb19998 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -52,12 +52,8 @@ * You can tell if you have a device that supports tagged queueing my * cating (eg) /proc/scsi/acornscsi/0 and see if the SCSI revision is reported * as '2 TAG'. - * - * Also note that CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE is normally set in the config - * scripts, but disabled here. Once debugged, remove the #undef, otherwise to debug, - * comment out the undef. */ -#undef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE + /* * SCSI-II Synchronous transfer support. * @@ -171,7 +167,7 @@ static void acornscsi_done(AS_Host *host, struct scsi_cmnd **SCpntp, unsigned int result); static int acornscsi_reconnect_finish(AS_Host *host); static void acornscsi_dma_cleanup(AS_Host *host); -static void acornscsi_abortcmd(AS_Host *host, unsigned char tag); +static void acornscsi_abortcmd(AS_Host *host); /* ==================================================================================== * Miscellaneous @@ -741,17 +737,6 @@ intr_ret_t acornscsi_kick(AS_Host *host) #endif if (from_queue) { -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - /* - * tagged queueing - allocate a new tag to this command - */ - if (SCpnt->device->simple_tags) { - SCpnt->device->current_tag += 1; - if (SCpnt->device->current_tag == 0) - SCpnt->device->current_tag = 1; - SCpnt->tag = SCpnt->device->current_tag; - } else -#endif set_bit(SCpnt->device->id * 8 + (u8)(SCpnt->device->lun & 0x07), host->busyluns); @@ -1192,7 +1177,7 @@ void acornscsi_dma_intr(AS_Host *host) * the device recognises the attention. */ if (dmac_read(host, DMAC_STATUS) & STATUS_RQ0) { - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); dmac_write(host, DMAC_TXCNTLO, 0); dmac_write(host, DMAC_TXCNTHI, 0); @@ -1560,23 +1545,6 @@ void acornscsi_message(AS_Host *host) acornscsi_sbic_issuecmd(host, CMND_ASSERTATN); switch (host->scsi.last_message) { -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - case HEAD_OF_QUEUE_TAG: - case ORDERED_QUEUE_TAG: - case SIMPLE_QUEUE_TAG: - /* - * ANSI standard says: (Section SCSI-2 Rev. 10c Sect 5.6.17) - * If a target does not implement tagged queuing and a queue tag - * message is received, it shall respond with a MESSAGE REJECT - * message and accept the I/O process as if it were untagged. - */ - printk(KERN_NOTICE "scsi%d.%c: disabling tagged queueing\n", - host->host->host_no, acornscsi_target(host)); - host->SCpnt->device->simple_tags = 0; - set_bit(host->SCpnt->device->id * 8 + - (u8)(host->SCpnt->device->lun & 0x7), host->busyluns); - break; -#endif case EXTENDED_MESSAGE | (EXTENDED_SDTR << 8): /* * Target can't handle synchronous transfers @@ -1687,24 +1655,11 @@ void acornscsi_buildmessages(AS_Host *host) #if 0 /* does the device need the current command aborted */ if (cmd_aborted) { - acornscsi_abortcmd(host->SCpnt->tag); + acornscsi_abortcmd(host); return; } #endif -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - if (host->SCpnt->tag) { - unsigned int tag_type; - - if (host->SCpnt->cmnd[0] == REQUEST_SENSE || - host->SCpnt->cmnd[0] == TEST_UNIT_READY || - host->SCpnt->cmnd[0] == INQUIRY) - tag_type = HEAD_OF_QUEUE_TAG; - else - tag_type = SIMPLE_QUEUE_TAG; - msgqueue_addmsg(&host->scsi.msgs, 2, tag_type, host->SCpnt->tag); - } -#endif #ifdef CONFIG_SCSI_ACORNSCSI_SYNC if (host->device[host->SCpnt->device->id].sync_state == SYNC_NEGOCIATE) { @@ -1798,7 +1753,7 @@ int acornscsi_reconnect(AS_Host *host) "to reconnect with\n", host->host->host_no, '0' + target); acornscsi_dumplog(host, target); - acornscsi_abortcmd(host, 0); + acornscsi_abortcmd(host); if (host->SCpnt) { queue_add_cmd_tail(&host->queues.disconnected, host->SCpnt); host->SCpnt = NULL; @@ -1821,7 +1776,7 @@ int acornscsi_reconnect_finish(AS_Host *host) host->scsi.disconnectable = 0; if (host->SCpnt->device->id == host->scsi.reconnected.target && host->SCpnt->device->lun == host->scsi.reconnected.lun && - host->SCpnt->tag == host->scsi.reconnected.tag) { + scsi_cmd_to_tag(host->SCpnt) == host->scsi.reconnected.tag) { #if (DEBUG & (DEBUG_QUEUES|DEBUG_DISCON)) DBG(host->SCpnt, printk("scsi%d.%c: reconnected", host->host->host_no, acornscsi_target(host))); @@ -1848,7 +1803,7 @@ int acornscsi_reconnect_finish(AS_Host *host) } if (!host->SCpnt) - acornscsi_abortcmd(host, host->scsi.reconnected.tag); + acornscsi_abortcmd(host); else { /* * Restore data pointer from SAVED pointers. @@ -1889,21 +1844,15 @@ void acornscsi_disconnect_unexpected(AS_Host *host) * Function: void acornscsi_abortcmd(AS_host *host, unsigned char tag) * Purpose : abort a currently executing command * Params : host - host with connected command to abort - * tag - tag to abort */ static -void acornscsi_abortcmd(AS_Host *host, unsigned char tag) +void acornscsi_abortcmd(AS_Host *host) { host->scsi.phase = PHASE_ABORTED; sbic_arm_write(host, SBIC_CMND, CMND_ASSERTATN); msgqueue_flush(&host->scsi.msgs); -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - if (tag) - msgqueue_addmsg(&host->scsi.msgs, 2, ABORT_TAG, tag); - else -#endif - msgqueue_addmsg(&host->scsi.msgs, 1, ABORT); + msgqueue_addmsg(&host->scsi.msgs, 1, ABORT); } /* ========================================================================================== @@ -1993,7 +1942,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) printk(KERN_ERR "scsi%d.%c: PHASE_CONNECTING, SSR %02X?\n", host->host->host_no, acornscsi_target(host), ssr); acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); } return INTR_PROCESSING; @@ -2029,7 +1978,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) printk(KERN_ERR "scsi%d.%c: PHASE_CONNECTED, SSR %02X?\n", host->host->host_no, acornscsi_target(host), ssr); acornscsi_dumplog(host, host->SCpnt ? host->SCpnt->device->id : 8); - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); } return INTR_PROCESSING; @@ -2075,20 +2024,20 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) case 0x18: /* -> PHASE_DATAOUT */ /* COMMAND -> DATA OUT */ if (host->scsi.SCp.sent_command != host->SCpnt->cmd_len) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); acornscsi_dma_setup(host, DMA_OUT); if (!acornscsi_starttransfer(host)) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); host->scsi.phase = PHASE_DATAOUT; return INTR_IDLE; case 0x19: /* -> PHASE_DATAIN */ /* COMMAND -> DATA IN */ if (host->scsi.SCp.sent_command != host->SCpnt->cmd_len) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); acornscsi_dma_setup(host, DMA_IN); if (!acornscsi_starttransfer(host)) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); host->scsi.phase = PHASE_DATAIN; return INTR_IDLE; @@ -2156,7 +2105,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) /* MESSAGE IN -> DATA OUT */ acornscsi_dma_setup(host, DMA_OUT); if (!acornscsi_starttransfer(host)) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); host->scsi.phase = PHASE_DATAOUT; return INTR_IDLE; @@ -2165,7 +2114,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) /* MESSAGE IN -> DATA IN */ acornscsi_dma_setup(host, DMA_IN); if (!acornscsi_starttransfer(host)) - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); host->scsi.phase = PHASE_DATAIN; return INTR_IDLE; @@ -2206,7 +2155,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) switch (ssr) { case 0x19: /* -> PHASE_DATAIN */ case 0x89: /* -> PHASE_DATAIN */ - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); return INTR_IDLE; case 0x1b: /* -> PHASE_STATUSIN */ @@ -2255,7 +2204,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) switch (ssr) { case 0x18: /* -> PHASE_DATAOUT */ case 0x88: /* -> PHASE_DATAOUT */ - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); return INTR_IDLE; case 0x1b: /* -> PHASE_STATUSIN */ @@ -2482,7 +2431,6 @@ static int acornscsi_queuecmd_lck(struct scsi_cmnd *SCpnt, SCpnt->scsi_done = done; SCpnt->host_scribble = NULL; SCpnt->result = 0; - SCpnt->tag = 0; SCpnt->SCp.phase = (int)acornscsi_datadirection(SCpnt->cmnd[0]); SCpnt->SCp.sent_command = 0; SCpnt->SCp.scsi_xferred = 0; @@ -2581,7 +2529,7 @@ static enum res_abort acornscsi_do_abort(AS_Host *host, struct scsi_cmnd *SCpnt) break; default: - acornscsi_abortcmd(host, host->SCpnt->tag); + acornscsi_abortcmd(host); res = res_snooze; } local_irq_restore(flags); @@ -2747,9 +2695,6 @@ char *acornscsi_info(struct Scsi_Host *host) #ifdef CONFIG_SCSI_ACORNSCSI_SYNC " SYNC" #endif -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - " TAG" -#endif #if (DEBUG & DEBUG_NO_WRITE) " NOWRITE (" __stringify(NO_WRITE) ")" #endif @@ -2770,9 +2715,6 @@ static int acornscsi_show_info(struct seq_file *m, struct Scsi_Host *instance) #ifdef CONFIG_SCSI_ACORNSCSI_SYNC " SYNC" #endif -#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE - " TAG" -#endif #if (DEBUG & DEBUG_NO_WRITE) " NOWRITE (" __stringify(NO_WRITE) ")" #endif @@ -2827,9 +2769,8 @@ static int acornscsi_show_info(struct seq_file *m, struct Scsi_Host *instance) seq_printf(m, "Device/Lun TaggedQ Sync\n"); seq_printf(m, " %d/%llu ", scd->id, scd->lun); if (scd->tagged_supported) - seq_printf(m, "%3sabled(%3d) ", - scd->simple_tags ? "en" : "dis", - scd->current_tag); + seq_printf(m, "%3sabled ", + scd->simple_tags ? "en" : "dis"); else seq_printf(m, "unsupported "); diff --git a/drivers/scsi/arm/queue.c b/drivers/scsi/arm/queue.c index e5559f27669d..c6f71a7d1b8e 100644 --- a/drivers/scsi/arm/queue.c +++ b/drivers/scsi/arm/queue.c @@ -214,7 +214,7 @@ struct scsi_cmnd *queue_remove_tgtluntag(Queue_t *queue, int target, int lun, list_for_each(l, &queue->head) { QE_t *q = list_entry(l, QE_t, list); if (q->SCpnt->device->id == target && q->SCpnt->device->lun == lun && - q->SCpnt->tag == tag) { + scsi_cmd_to_rq(q->SCpnt)->tag == tag) { SCpnt = __queue_remove(queue, l); break; } -- cgit From a4869faf9642518145a8aa4b52e0d5ab0e7ee896 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 15 Sep 2021 17:07:15 +0800 Subject: scsi: core: Remove 'current_tag' The 'current_tag' field in struct scsi_device is unused now; remove it. Link: https://lore.kernel.org/r/1631696835-136198-4-git-send-email-john.garry@huawei.com Reviewed-by: Bart Van Assche Signed-off-by: Hannes Reinecke Signed-off-by: John Garry Signed-off-by: Martin K. Petersen --- include/scsi/scsi_device.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 09a17f6e93a7..b97e142a7ca9 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -146,7 +146,6 @@ struct scsi_device { struct scsi_vpd __rcu *vpd_pg83; struct scsi_vpd __rcu *vpd_pg80; struct scsi_vpd __rcu *vpd_pg89; - unsigned char current_tag; /* current tag */ struct scsi_target *sdev_target; blist_flags_t sdev_bflags; /* black/white flags as also found in -- cgit From cdbc16c552f27ac211a44f9959d813b4f3188223 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Sep 2021 16:22:51 +0300 Subject: scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn() This scnprintf() uses the wrong limit. It should be "LPFC_FPIN_WWPN_LINE_SZ - len" instead of LPFC_FPIN_WWPN_LINE_SZ. Link: https://lore.kernel.org/r/20210916132251.GD25094@kili Fixes: 428569e66fa7 ("scsi: lpfc: Expand FPIN and RDF receive logging") Reviewed-by: James Smart Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_els.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index f3fc79b99165..052c0e5b1119 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -9387,7 +9387,7 @@ lpfc_display_fpin_wwpn(struct lpfc_hba *phba, __be64 *wwnlist, u32 cnt) /* Extract the next WWPN from the payload */ wwn = *wwnlist++; wwpn = be64_to_cpu(wwn); - len += scnprintf(buf + len, LPFC_FPIN_WWPN_LINE_SZ, + len += scnprintf(buf + len, LPFC_FPIN_WWPN_LINE_SZ - len, " %016llx", wwpn); /* Log a message if we are on the last WWPN -- cgit From 6dacc371b77f473770ec646e220303a84fe96c11 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Sep 2021 16:23:31 +0300 Subject: scsi: lpfc: Use correct scnprintf() limit The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE". We're not going to hit the limit so this fix will not affect runtime. Link: https://lore.kernel.org/r/20210916132331.GE25094@kili Fixes: 5b9e70b22cc5 ("scsi: lpfc: raise sg count for nvme to use available sg resources") Reviewed-by: James Smart Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_attr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index b35bf70a8c0d..1e5a30eb04de 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -6204,7 +6204,8 @@ lpfc_sg_seg_cnt_show(struct device *dev, struct device_attribute *attr, len = scnprintf(buf, PAGE_SIZE, "SGL sz: %d total SGEs: %d\n", phba->cfg_sg_dma_buf_size, phba->cfg_total_seg_cnt); - len += scnprintf(buf + len, PAGE_SIZE, "Cfg: %d SCSI: %d NVME: %d\n", + len += scnprintf(buf + len, PAGE_SIZE - len, + "Cfg: %d SCSI: %d NVME: %d\n", phba->cfg_sg_seg_cnt, phba->cfg_scsi_seg_cnt, phba->cfg_nvme_seg_cnt); return len; -- cgit From a38923f2d088d1a5cbaa86818abe039b2f87093d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Sep 2021 11:56:22 +0200 Subject: scsi: lpfc: Fix gcc -Wstringop-overread warning, again I fixed a stringop-overread warning earlier this year, now a second copy of the original code was added and the warning came back: drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_cmf_info_show': drivers/scsi/lpfc/lpfc_attr.c:289:25: error: 'strnlen' specified bound 4095 exceeds source size 24 [-Werror=stringop-overread] 289 | strnlen(LPFC_INFO_MORE_STR, PAGE_SIZE - 1), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix it the same way as the other copy. Link: https://lore.kernel.org/r/20210920095628.1191676-1-arnd@kernel.org Fixes: ada48ba70f6b ("scsi: lpfc: Fix gcc -Wstringop-overread warning") Fixes: 74a7baa2a3ee ("scsi: lpfc: Add cmf_info sysfs entry") Reviewed-by: James Smart Signed-off-by: Arnd Bergmann Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_attr.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 1e5a30eb04de..ebe417921dac 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -285,11 +285,8 @@ buffer_done: "6312 Catching potential buffer " "overflow > PAGE_SIZE = %lu bytes\n", PAGE_SIZE); - strscpy(buf + PAGE_SIZE - 1 - - strnlen(LPFC_INFO_MORE_STR, PAGE_SIZE - 1), - LPFC_INFO_MORE_STR, - strnlen(LPFC_INFO_MORE_STR, PAGE_SIZE - 1) - + 1); + strscpy(buf + PAGE_SIZE - 1 - sizeof(LPFC_INFO_MORE_STR), + LPFC_INFO_MORE_STR, sizeof(LPFC_INFO_MORE_STR) + 1); } return len; } -- cgit From 9a8ef2c73c727a3c64b70c01697c578c7b10fed2 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 20 Sep 2021 19:32:06 +0100 Subject: scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT" There is a spelling mistake in a dev_err message. Fix it. Link: https://lore.kernel.org/r/20210920183206.17477-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen --- drivers/target/target_core_pr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 4b94b085625b..3829b61b56c1 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -269,7 +269,7 @@ target_scsi2_reservation_reserve(struct se_cmd *cmd) spin_lock(&dev->dev_reservation_lock); if (dev->reservation_holder && dev->reservation_holder->se_node_acl != sess->se_node_acl) { - pr_err("SCSI-2 RESERVATION CONFLIFT for %s fabric\n", + pr_err("SCSI-2 RESERVATION CONFLICT for %s fabric\n", tpg->se_tpg_tfo->fabric_name); pr_err("Original reserver LUN: %llu %s\n", cmd->se_lun->unpacked_lun, -- cgit From fbdac19e642899455b4e64c63aafe2325df7aafa Mon Sep 17 00:00:00 2001 From: Wen Xiong Date: Thu, 16 Sep 2021 22:24:21 -0500 Subject: scsi: ses: Retry failed Send/Receive Diagnostic commands Setting SCSI logging level with error=3, we saw some errors from enclosues: [108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427778] ses 0:0:9:0: Power-on or device reset occurred [108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current] [108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred [108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1 [108017.427804] ses 0:0:9:0: Failed to bind enclosure -19 [108017.427895] ses 0:0:10:0: Attached Enclosure device [108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13 Retry if the Send/Receive Diagnostic commands complete with a transient error status (NOT_READY or UNIT_ATTENTION with ASC 0x29). Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com Reviewed-by: Brian King Reviewed-by: James Bottomley Signed-off-by: Wen Xiong Signed-off-by: Martin K. Petersen --- drivers/scsi/ses.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index c2afba2a5414..43e682297fd5 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -87,9 +87,16 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code, 0 }; unsigned char recv_page_code; + unsigned int retries = SES_RETRIES; + struct scsi_sense_hdr sshdr; + + do { + ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, + &sshdr, SES_TIMEOUT, 1, NULL); + } while (ret > 0 && --retries && scsi_sense_valid(&sshdr) && + (sshdr.sense_key == NOT_READY || + (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29))); - ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (unlikely(ret)) return ret; @@ -121,9 +128,16 @@ static int ses_send_diag(struct scsi_device *sdev, int page_code, bufflen & 0xff, 0 }; + struct scsi_sense_hdr sshdr; + unsigned int retries = SES_RETRIES; + + do { + result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, + &sshdr, SES_TIMEOUT, 1, NULL); + } while (result > 0 && --retries && scsi_sense_valid(&sshdr) && + (sshdr.sense_key == NOT_READY || + (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29))); - result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (result) sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n", result); -- cgit From f7d848e0fdfa557f181955a769cbb163d54fd292 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 22 Sep 2021 08:30:08 +0200 Subject: MAINTAINERS: usb, update Peter Korsgaard's entries Peter's e-mail in MAINTAINERS is defunct: This is the qmail-send program at a.mx.sunsite.dk. : Sorry, no mailbox here by that name. (#5.1.1) Peter says: ** Ahh yes, it should be changed to peter@korsgaard.com. However he also says: ** I haven't had access to c67x00 hw for quite some years though, so maybe ** it should be marked Orphan instead? So change as he wishes. Cc: Peter Korsgaard Cc: Linus Torvalds Cc: linux-usb@vger.kernel.org Acked-by: Peter Korsgaard Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210922063008.25758-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..d1bbaf06dc1d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19288,13 +19288,12 @@ S: Maintained F: drivers/usb/misc/chaoskey.c USB CYPRESS C67X00 DRIVER -M: Peter Korsgaard L: linux-usb@vger.kernel.org -S: Maintained +S: Orphan F: drivers/usb/c67x00/ USB DAVICOM DM9601 DRIVER -M: Peter Korsgaard +M: Peter Korsgaard L: netdev@vger.kernel.org S: Maintained W: http://www.linux-usb.org/usbnet -- cgit From 22d65765f211cc83186fd8b87521159f354c0da9 Mon Sep 17 00:00:00 2001 From: Andrej Shadura Date: Thu, 16 Sep 2021 17:33:11 +0100 Subject: HID: u2fzero: ignore incomplete packets without data Since the actual_length calculation is performed unsigned, packets shorter than 7 bytes (e.g. packets without data or otherwise truncated) or non-received packets ("zero" bytes) can cause buffer overflow. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214437 Fixes: 42337b9d4d958("HID: add driver for U2F Zero built-in LED and RNG") Signed-off-by: Andrej Shadura Signed-off-by: Jiri Kosina --- drivers/hid/hid-u2fzero.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-u2fzero.c b/drivers/hid/hid-u2fzero.c index 95e0807878c7..d70cd3d7f583 100644 --- a/drivers/hid/hid-u2fzero.c +++ b/drivers/hid/hid-u2fzero.c @@ -198,7 +198,9 @@ static int u2fzero_rng_read(struct hwrng *rng, void *data, } ret = u2fzero_recv(dev, &req, &resp); - if (ret < 0) + + /* ignore errors or packets without data */ + if (ret < offsetof(struct u2f_hid_msg, init.data)) return 0; /* only take the minimum amount of data it is safe to take */ -- cgit From cef0d022f55364d69017daeb9443bd31510ad6a2 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 16 Aug 2021 12:41:19 +0200 Subject: gpiolib: acpi: Make set-debounce-timeout failures non fatal Commit 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings") made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting GPIOs. This in itself is fine, but it also made gpio_set_debounce_timeout() errors fatal, causing the requesting of the GPIO to fail. This is causing regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO ACPI event sources specify a debouncy timeout of 20 ms, but the pinctrl-baytrail.c only supports certain fixed values, the closest ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL when specified a value which is not one of the fixed values. This is causing the acpi_request_own_gpiod() call to fail for 3 ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing e.g. the battery charging vs discharging status to never get updated, even though a charger has been plugged-in or unplugged. Make gpio_set_debounce_timeout() errors non fatal, warning about the failure instead, to fix this regression. Note we should probably also fix various pinctrl drivers to just pick the first bigger discrete value rather then returning -EINVAL but this will need to be done on a per driver basis, where as this fix at least gets us back to where things were before and thus restores functionality on devices where this was lost due to gpio_set_debounce_timeout() errors. Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings") Depends-on: 2e2b496cebef ("gpiolib: acpi: Extract acpi_request_own_gpiod() helper") Reviewed-by: Mika Westerberg Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib-acpi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 411525ac4cc4..47712b6903b5 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -313,9 +313,11 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip, ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout); if (ret) - gpiochip_free_own_desc(desc); + dev_warn(chip->parent, + "Failed to set debounce-timeout for pin 0x%04X, err %d\n", + pin, ret); - return ret ? ERR_PTR(ret) : desc; + return desc; } static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in) -- cgit From 2dd824cca3407bc9a2bd11b00f6e117b66fcfcf1 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Thu, 16 Sep 2021 20:19:35 +0900 Subject: gpio: uniphier: Fix void functions to remove return value The return type of irq_chip.irq_mask() and irq_chip.irq_unmask() should be void. Fixes: dbe776c2ca54 ("gpio: uniphier: add UniPhier GPIO controller driver") Signed-off-by: Kunihiko Hayashi Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-uniphier.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c index f99f3c10bed0..39dca147d587 100644 --- a/drivers/gpio/gpio-uniphier.c +++ b/drivers/gpio/gpio-uniphier.c @@ -184,7 +184,7 @@ static void uniphier_gpio_irq_mask(struct irq_data *data) uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, 0); - return irq_chip_mask_parent(data); + irq_chip_mask_parent(data); } static void uniphier_gpio_irq_unmask(struct irq_data *data) @@ -194,7 +194,7 @@ static void uniphier_gpio_irq_unmask(struct irq_data *data) uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, mask); - return irq_chip_unmask_parent(data); + irq_chip_unmask_parent(data); } static int uniphier_gpio_irq_set_type(struct irq_data *data, unsigned int type) -- cgit From f6c35df22708438c94605b8896d2b4e4d5f342a3 Mon Sep 17 00:00:00 2001 From: Steven Lee Date: Tue, 7 Sep 2021 17:55:25 +0800 Subject: gpio: gpio-aspeed-sgpio: Fix wrong hwirq in irq handler. The current hwirq is calculated based on the old GPIO pin order(input GPIO range is from 0 to ngpios - 1). It should be calculated based on the current GPIO input pin order(input GPIOs are 0, 2, 4, ..., (ngpios - 1) * 2). Signed-off-by: Steven Lee Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-aspeed-sgpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-aspeed-sgpio.c b/drivers/gpio/gpio-aspeed-sgpio.c index 10f303d15225..3d6ef37a7702 100644 --- a/drivers/gpio/gpio-aspeed-sgpio.c +++ b/drivers/gpio/gpio-aspeed-sgpio.c @@ -395,7 +395,7 @@ static void aspeed_sgpio_irq_handler(struct irq_desc *desc) reg = ioread32(bank_reg(data, bank, reg_irq_status)); for_each_set_bit(p, ®, 32) - generic_handle_domain_irq(gc->irq.domain, i * 32 + p); + generic_handle_domain_irq(gc->irq.domain, i * 32 + p * 2); } chained_irq_exit(ic, desc); -- cgit From 0f562b7de99085935d76b00c41ab5caa26ff5c74 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 14 Sep 2021 00:49:23 +0200 Subject: gpio/rockchip: extended debounce support is only available on v2 The gpio driver runs into issues on v1 gpio blocks, as the db_clk and the whole extended debounce support is only ever defined on v2. So checking for the IS_ERR on the db_clk is not enough, as it will be NULL on v1. Fix this by adding the needed condition for v2 first before checking the existence of the db_clk. This caused my rk3288-veyron-pinky to enter a reboot loop when it tried to enable the power-key as adc-key device. Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller") Signed-off-by: Heiko Stuebner Reviewed-by: Linus Walleij Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-rockchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index 036b2d959503..16d9bf7188e3 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -195,7 +195,7 @@ static int rockchip_gpio_set_debounce(struct gpio_chip *gc, unsigned int cur_div_reg; u64 div; - if (!IS_ERR(bank->db_clk)) { + if (bank->gpio_type == GPIO_TYPE_V2 && !IS_ERR(bank->db_clk)) { div_debounce_support = true; freq = clk_get_rate(bank->db_clk); max_debounce = (GENMASK(23, 0) + 1) * 2 * 1000000 / freq; -- cgit From b22a4705e2e60f342b1b851c9ebdb3ea02f21f8f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 14 Sep 2021 00:49:24 +0200 Subject: gpio/rockchip: fix get_direction value handling The function uses the newly introduced rockchip_gpio_readl_bit() which directly returns the actual value of the requeste bit. So using the existing bit-wise check for the bit inside the value will always return 0. Fix this by dropping the bit manipulation on the result. Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller") Signed-off-by: Heiko Stuebner Reviewed-by: Linus Walleij Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-rockchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index 16d9bf7188e3..3335bd57761d 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -141,7 +141,7 @@ static int rockchip_gpio_get_direction(struct gpio_chip *chip, u32 data; data = rockchip_gpio_readl_bit(bank, offset, bank->gpio_regs->port_ddr); - if (data & BIT(offset)) + if (data) return GPIO_LINE_DIRECTION_OUT; return GPIO_LINE_DIRECTION_IN; -- cgit From 372d1f3e1bfede719864d0d1fbf3146b1e638c88 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Sep 2021 23:32:33 +0300 Subject: ext2: fix sleeping in atomic bugs on error The ext2_error() function syncs the filesystem so it sleeps. The caller is holding a spinlock so it's not allowed to sleep. ext2_statfs() <- disables preempt -> ext2_count_free_blocks() -> ext2_get_group_desc() Fix this by using WARN() to print an error message and a stack trace instead of using ext2_error(). Link: https://lore.kernel.org/r/20210921203233.GA16529@kili Signed-off-by: Dan Carpenter Signed-off-by: Jan Kara --- fs/ext2/balloc.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c index 1f3f4326bf3c..c17ccc19b938 100644 --- a/fs/ext2/balloc.c +++ b/fs/ext2/balloc.c @@ -48,10 +48,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, struct ext2_sb_info *sbi = EXT2_SB(sb); if (block_group >= sbi->s_groups_count) { - ext2_error (sb, "ext2_get_group_desc", - "block_group >= groups_count - " - "block_group = %d, groups_count = %lu", - block_group, sbi->s_groups_count); + WARN(1, "block_group >= groups_count - " + "block_group = %d, groups_count = %lu", + block_group, sbi->s_groups_count); return NULL; } @@ -59,10 +58,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, group_desc = block_group >> EXT2_DESC_PER_BLOCK_BITS(sb); offset = block_group & (EXT2_DESC_PER_BLOCK(sb) - 1); if (!sbi->s_group_desc[group_desc]) { - ext2_error (sb, "ext2_get_group_desc", - "Group descriptor not loaded - " - "block_group = %d, group_desc = %lu, desc = %lu", - block_group, group_desc, offset); + WARN(1, "Group descriptor not loaded - " + "block_group = %d, group_desc = %lu, desc = %lu", + block_group, group_desc, offset); return NULL; } -- cgit From 2a7313dc81e88adc7bb09d0f056985fa8afc2b89 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 22 Sep 2021 14:19:41 +0100 Subject: irqchip/armada-370-xp: Fix ack/eoi breakage When converting the driver to using handle_percpu_devid_irq, we forgot to repaint the irq_eoi() callback into irq_ack(), as handle_percpu_devid_fasteoi_ipi() was actually using EOI really early in the handling. Yes this was a stupid idea. Fix this by using the HW ack method as irq_ack(). Fixes: e52e73b7e9f7 ("irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()") Reported-by: Steffen Trumtrar Tested-by: Steffen Trumtrar Signed-off-by: Marc Zyngier Cc: Valentin Schneider Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tuiexq5f.fsf@pengutronix.de --- drivers/irqchip/irq-armada-370-xp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c index 7557ab551295..53e0fb0562c1 100644 --- a/drivers/irqchip/irq-armada-370-xp.c +++ b/drivers/irqchip/irq-armada-370-xp.c @@ -359,16 +359,16 @@ static void armada_370_xp_ipi_send_mask(struct irq_data *d, ARMADA_370_XP_SW_TRIG_INT_OFFS); } -static void armada_370_xp_ipi_eoi(struct irq_data *d) +static void armada_370_xp_ipi_ack(struct irq_data *d) { writel(~BIT(d->hwirq), per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); } static struct irq_chip ipi_irqchip = { .name = "IPI", + .irq_ack = armada_370_xp_ipi_ack, .irq_mask = armada_370_xp_ipi_mask, .irq_unmask = armada_370_xp_ipi_unmask, - .irq_eoi = armada_370_xp_ipi_eoi, .ipi_send_mask = armada_370_xp_ipi_send_mask, }; -- cgit From 20c36ce2164f1774b487d443ece99b754bc6ad43 Mon Sep 17 00:00:00 2001 From: Bixuan Cui Date: Thu, 16 Sep 2021 10:52:03 +0800 Subject: irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent The 'size' is used in struct_size(domain, revmap, size) and its input parameter type is 'size_t'(unsigned int). Changing the size to 'unsigned int' to make the type consistent. Signed-off-by: Bixuan Cui Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210916025203.44841-1-cuibixuan@huawei.com --- include/linux/irqdomain.h | 2 +- kernel/irq/irqdomain.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index 23e4ee523576..9ee238ad29ce 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -251,7 +251,7 @@ static inline struct fwnode_handle *irq_domain_alloc_fwnode(phys_addr_t *pa) } void irq_domain_free_fwnode(struct fwnode_handle *fwnode); -struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, int size, +struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int size, irq_hw_number_t hwirq_max, int direct_max, const struct irq_domain_ops *ops, void *host_data); diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 62be16135e7c..bfa289ed57ab 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -136,7 +136,7 @@ EXPORT_SYMBOL_GPL(irq_domain_free_fwnode); * Allocates and initializes an irq_domain structure. * Returns pointer to IRQ domain, or NULL on failure. */ -struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, int size, +struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int size, irq_hw_number_t hwirq_max, int direct_max, const struct irq_domain_ops *ops, void *host_data) -- cgit From b99948836162b0cfb03007d9b2c2da9babc057b5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 4 Sep 2021 20:36:44 -0700 Subject: irqchip/mbigen: Repair non-kernel-doc notation Fix kernel-doc warnings in irq-mbigen.c: irq-mbigen.c:29: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * In mbigen vector register irq-mbigen.c:43: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * offset of clear register in mbigen node irq-mbigen.c:50: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * offset of interrupt type register Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Jun Ma Cc: Yun Wu Cc: Thomas Gleixner Cc: Marc Zyngier Cc: Aditya Srivastava Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210905033644.15988-1-rdunlap@infradead.org --- drivers/irqchip/irq-mbigen.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c index f565317a3da3..12df2162108e 100644 --- a/drivers/irqchip/irq-mbigen.c +++ b/drivers/irqchip/irq-mbigen.c @@ -25,7 +25,7 @@ /* The maximum IRQ pin number of mbigen chip(start from 0) */ #define MAXIMUM_IRQ_PIN_NUM 1407 -/** +/* * In mbigen vector register * bit[21:12]: event id value * bit[11:0]: device id @@ -39,14 +39,14 @@ /* offset of vector register in mbigen node */ #define REG_MBIGEN_VEC_OFFSET 0x200 -/** +/* * offset of clear register in mbigen node * This register is used to clear the status * of interrupt */ #define REG_MBIGEN_CLEAR_OFFSET 0xa000 -/** +/* * offset of interrupt type register * This register is used to configure interrupt * trigger type -- cgit From 969ac78db78c723a24e9410666b457cc1b0cb3c3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 5 Sep 2021 09:25:19 -0700 Subject: irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build irq-goldfish-pic uses GENERIC_IRQ_CHIP interfaces so select that symbol to fix build errors. Fixes these build errors: mips-linux-ld: drivers/irqchip/irq-goldfish-pic.o: in function `goldfish_pic_of_init': irq-goldfish-pic.c:(.init.text+0xc0): undefined reference to `irq_alloc_generic_chip' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf4): undefined reference to `irq_gc_unmask_enable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0xf8): undefined reference to `irq_gc_unmask_enable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x100): undefined reference to `irq_gc_mask_disable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x104): undefined reference to `irq_gc_mask_disable_reg' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x11c): undefined reference to `irq_setup_generic_chip' mips-linux-ld: irq-goldfish-pic.c:(.init.text+0x168): undefined reference to `irq_remove_generic_chip' Fixes: 4235ff50cf98 ("irqchip/irq-goldfish-pic: Add Goldfish PIC driver") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Miodrag Dinic Cc: Geert Uytterhoeven Cc: Bartosz Golaszewski Cc: Thomas Gleixner Cc: Marc Zyngier Cc: Goran Ferenc Cc: Aleksandar Markovic Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210905162519.21507-1-rdunlap@infradead.org --- drivers/irqchip/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 4d5924e9f766..aca7b595c4c7 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -409,6 +409,7 @@ config MESON_IRQ_GPIO config GOLDFISH_PIC bool "Goldfish programmable interrupt controller" depends on MIPS && (GOLDFISH || COMPILE_TEST) + select GENERIC_IRQ_CHIP select IRQ_DOMAIN help Say yes here to enable Goldfish interrupt controller driver used -- cgit From 280bef512933b2dda01d681d8cbe499b98fc5bdd Mon Sep 17 00:00:00 2001 From: Kaige Fu Date: Wed, 15 Sep 2021 10:20:55 +0800 Subject: irqchip/gic-v3-its: Fix potential VPE leak on error In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error, there is an off-by-one in the number of VPEs to be freed. Fix it by simply passing the number of VPEs allocated, which is the index of the loop iterating over the VPEs. Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown") Signed-off-by: Kaige Fu [maz: fixed commit message] Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/d9e36dee512e63670287ed9eff884a5d8d6d27f2.1631672311.git.kaige.fu@linux.alibaba.com --- drivers/irqchip/irq-gic-v3-its.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 7f40dca8cda5..eb0882d15366 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -4501,7 +4501,7 @@ static int its_vpe_irq_domain_alloc(struct irq_domain *domain, unsigned int virq if (err) { if (i > 0) - its_vpe_irq_domain_free(domain, virq, i - 1); + its_vpe_irq_domain_free(domain, virq, i); its_lpi_free(bitmap, base, nr_ids); its_free_prop_table(vprop_page); -- cgit From 3ce8c70ecedb4e1f1d36301afb0281be40390f13 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 15 Sep 2021 11:47:30 +0200 Subject: irqchip/renesas-rza1: Use semicolons instead of commas This code works, but it is cleaner to use semicolons at the end of statements instead of commas. Extracted from a big anonymous patch by Julia Lawall . Signed-off-by: Geert Uytterhoeven Reviewed-by: Ulrich Hecht Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/b1710bb6ea5faa7a7fe74404adb0beb951e0bf8c.1631699160.git.geert+renesas@glider.be --- drivers/irqchip/irq-renesas-rza1.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/irqchip/irq-renesas-rza1.c b/drivers/irqchip/irq-renesas-rza1.c index b0d46ac42b89..72c06e883d1c 100644 --- a/drivers/irqchip/irq-renesas-rza1.c +++ b/drivers/irqchip/irq-renesas-rza1.c @@ -223,12 +223,12 @@ static int rza1_irqc_probe(struct platform_device *pdev) goto out_put_node; } - priv->chip.name = "rza1-irqc", - priv->chip.irq_mask = irq_chip_mask_parent, - priv->chip.irq_unmask = irq_chip_unmask_parent, - priv->chip.irq_eoi = rza1_irqc_eoi, - priv->chip.irq_retrigger = irq_chip_retrigger_hierarchy, - priv->chip.irq_set_type = rza1_irqc_set_type, + priv->chip.name = "rza1-irqc"; + priv->chip.irq_mask = irq_chip_mask_parent; + priv->chip.irq_unmask = irq_chip_unmask_parent; + priv->chip.irq_eoi = rza1_irqc_eoi; + priv->chip.irq_retrigger = irq_chip_retrigger_hierarchy; + priv->chip.irq_set_type = rza1_irqc_set_type; priv->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE; priv->irq_domain = irq_domain_add_hierarchy(parent, 0, IRQC_NUM_IRQ, -- cgit From 1ea7812326004afd2803cc968a4776ae5120a597 Mon Sep 17 00:00:00 2001 From: Shai Malin Date: Wed, 22 Sep 2021 13:53:26 +0300 Subject: qed: rdma - don't wait for resources under hw error recovery flow If the HW device is during recovery, the HW resources will never return, hence we shouldn't wait for the CID (HW context ID) bitmaps to clear. This fix speeds up the error recovery flow. Fixes: 64515dc899df ("qed: Add infrastructure for error detection and recovery") Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Signed-off-by: Shai Malin Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 8 ++++++++ drivers/net/ethernet/qlogic/qed/qed_roce.c | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c index fc8b3e64f153..186d0048a9d1 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c @@ -1297,6 +1297,14 @@ qed_iwarp_wait_cid_map_cleared(struct qed_hwfn *p_hwfn, struct qed_bmap *bmap) prev_weight = weight; while (weight) { + /* If the HW device is during recovery, all resources are + * immediately reset without receiving a per-cid indication + * from HW. In this case we don't expect the cid_map to be + * cleared. + */ + if (p_hwfn->cdev->recov_in_prog) + return 0; + msleep(QED_IWARP_MAX_CID_CLEAN_TIME); weight = bitmap_weight(bmap->bitmap, bmap->max_count); diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c index f16a157bb95a..cf5baa5e59bc 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_roce.c +++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c @@ -77,6 +77,14 @@ void qed_roce_stop(struct qed_hwfn *p_hwfn) * Beyond the added delay we clear the bitmap anyway. */ while (bitmap_weight(rcid_map->bitmap, rcid_map->max_count)) { + /* If the HW device is during recovery, all resources are + * immediately reset without receiving a per-cid indication + * from HW. In this case we don't expect the cid bitmap to be + * cleared. + */ + if (p_hwfn->cdev->recov_in_prog) + return; + msleep(100); if (wait_count++ > 20) { DP_NOTICE(p_hwfn, "cid bitmap wait timed out\n"); -- cgit From 977d293e23b48a1129830d7968605f61c4af71a0 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 22 Sep 2021 13:12:17 +0200 Subject: mptcp: ensure tx skbs always have the MPTCP ext Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension. Reported-and-tested-by: syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com Fixes: 1094c6fe7280 ("mptcp: fix possible divide by zero") Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller --- net/mptcp/protocol.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 2602f1386160..dbcebf56798f 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -1316,7 +1316,7 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk, goto alloc_skb; } - must_collapse = (info->size_goal - skb->len > 0) && + must_collapse = (info->size_goal > skb->len) && (skb_shinfo(skb)->nr_frags < sysctl_max_skb_frags); if (must_collapse) { size_bias = skb->len; @@ -1325,7 +1325,7 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk, } alloc_skb: - if (!must_collapse && !ssk->sk_tx_skb_cache && + if (!must_collapse && !mptcp_alloc_tx_skb(sk, ssk, info->data_lock_held)) return 0; -- cgit From b78f26926b17cc289e4f16b63363abe0aa2e8efc Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 10 Sep 2021 18:29:25 +0100 Subject: irqchip/gic: Work around broken Renesas integration Geert reported that the GIC driver locks up on a Renesas system since 005c34ae4b44f085 ("irqchip/gic: Atomically update affinity") fixed the driver to use writeb_relaxed() instead of writel_relaxed(). As it turns out, the interconnect used on this system mandates 32bit wide accesses for all MMIO transactions, even if the GIC architecture specifically mandates for some registers to be byte accessible. Gahhh... Work around the issue by crudly detecting the offending system, and falling back to an inefficient RMW+lock implementation. Reported-by: Geert Uytterhoeven Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/CAMuHMdV+Ev47K5NO8XHsanSq5YRMCHn2gWAQyV-q2LpJVy9HiQ@mail.gmail.com --- drivers/irqchip/irq-gic.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index d329ec3d64d8..5f22c9d65e57 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -107,6 +107,8 @@ static DEFINE_RAW_SPINLOCK(cpu_map_lock); #endif +static DEFINE_STATIC_KEY_FALSE(needs_rmw_access); + /* * The GIC mapping of CPU interfaces does not necessarily match * the logical CPU numbering. Let's use a mapping as returned @@ -774,6 +776,25 @@ static int gic_pm_init(struct gic_chip_data *gic) #endif #ifdef CONFIG_SMP +static void rmw_writeb(u8 bval, void __iomem *addr) +{ + static DEFINE_RAW_SPINLOCK(rmw_lock); + unsigned long offset = (unsigned long)addr & 3UL; + unsigned long shift = offset * 8; + unsigned long flags; + u32 val; + + raw_spin_lock_irqsave(&rmw_lock, flags); + + addr -= offset; + val = readl_relaxed(addr); + val &= ~GENMASK(shift + 7, shift); + val |= bval << shift; + writel_relaxed(val, addr); + + raw_spin_unlock_irqrestore(&rmw_lock, flags); +} + static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bool force) { @@ -788,7 +809,10 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) return -EINVAL; - writeb_relaxed(gic_cpu_map[cpu], reg); + if (static_branch_unlikely(&needs_rmw_access)) + rmw_writeb(gic_cpu_map[cpu], reg); + else + writeb_relaxed(gic_cpu_map[cpu], reg); irq_data_update_effective_affinity(d, cpumask_of(cpu)); return IRQ_SET_MASK_OK_DONE; @@ -1375,6 +1399,30 @@ static bool gic_check_eoimode(struct device_node *node, void __iomem **base) return true; } +static bool gic_enable_rmw_access(void *data) +{ + /* + * The EMEV2 class of machines has a broken interconnect, and + * locks up on accesses that are less than 32bit. So far, only + * the affinity setting requires it. + */ + if (of_machine_is_compatible("renesas,emev2")) { + static_branch_enable(&needs_rmw_access); + return true; + } + + return false; +} + +static const struct gic_quirk gic_quirks[] = { + { + .desc = "broken byte access", + .compatible = "arm,pl390", + .init = gic_enable_rmw_access, + }, + { }, +}; + static int gic_of_setup(struct gic_chip_data *gic, struct device_node *node) { if (!gic || !node) @@ -1391,6 +1439,8 @@ static int gic_of_setup(struct gic_chip_data *gic, struct device_node *node) if (of_property_read_u32(node, "cpu-offset", &gic->percpu_offset)) gic->percpu_offset = 0; + gic_enable_of_quirks(node, gic_quirks, gic); + return 0; error: -- cgit From 7df835a32a8bedf7ce88efcfa7c9b245b52ff139 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 1 Sep 2021 13:38:29 +0200 Subject: md: fix a lock order reversal in md_alloc Commit b0140891a8cea3 ("md: Fix race when creating a new md device.") not only moved assigning mddev->gendisk before calling add_disk, which fixes the races described in the commit log, but also added a mddev->open_mutex critical section over add_disk and creation of the md kobj. Adding a kobject after add_disk is racy vs deleting the gendisk right after adding it, but md already prevents against that by holding a mddev->active reference. On the other hand taking this lock added a lock order reversal with what is not disk->open_mutex (used to be bdev->bd_mutex when the commit was added) for partition devices, which need that lock for the internal open for the partition scan, and a recent commit also takes it for non-partitioned devices, leading to further lockdep splatter. Fixes: b0140891a8ce ("md: Fix race when creating a new md device.") Fixes: d62633873590 ("block: support delayed holder registration") Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Signed-off-by: Christoph Hellwig Tested-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Reviewed-by: NeilBrown Signed-off-by: Song Liu --- drivers/md/md.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index ae8fe54ea358..6c0c3d0d905a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5700,10 +5700,6 @@ static int md_alloc(dev_t dev, char *name) disk->flags |= GENHD_FL_EXT_DEVT; disk->events |= DISK_EVENT_MEDIA_CHANGE; mddev->gendisk = disk; - /* As soon as we call add_disk(), another thread could get - * through to md_open, so make sure it doesn't get too far - */ - mutex_lock(&mddev->open_mutex); add_disk(disk); error = kobject_add(&mddev->kobj, &disk_to_dev(disk)->kobj, "%s", "md"); @@ -5718,7 +5714,6 @@ static int md_alloc(dev_t dev, char *name) if (mddev->kobj.sd && sysfs_create_group(&mddev->kobj, &md_bitmap_group)) pr_debug("pointless warning\n"); - mutex_unlock(&mddev->open_mutex); abort: mutex_unlock(&disks_mutex); if (!error && mddev->kobj.sd) { -- cgit From 8f1b7ba55c61d2c9f3a47a4759db43abfb59fc16 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 22 Sep 2021 08:35:58 +0200 Subject: MAINTAINERS: ARM/VT8500, remove defunct e-mail linux@prisktech.co.nz is defunct: 4.1.2 : Recipient address rejected: Domain not found Remove it from MAINTAINERS and mark the ARM/VT8500 entry orphan. Signed-off-by: Jiri Slaby Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ca6d6fde85cf..0227e15e2484 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2804,9 +2804,8 @@ F: arch/arm/mach-pxa/include/mach/vpac270.h F: arch/arm/mach-pxa/vpac270.c ARM/VT8500 ARM ARCHITECTURE -M: Tony Prisk L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained +S: Orphan F: Documentation/devicetree/bindings/i2c/i2c-wmt.txt F: arch/arm/mach-vt8500/ F: drivers/clocksource/timer-vt8500.c -- cgit From bc0bdc5afaa740d782fbf936aaeebd65e5c2921d Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 15 Sep 2021 17:21:43 -0300 Subject: RDMA/cma: Do not change route.addr.src_addr.ss_family If the state is not idle then rdma_bind_addr() will immediately fail and no change to global state should happen. For instance if the state is already RDMA_CM_LISTEN then this will corrupt the src_addr and would cause the test in cma_cancel_operation(): if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev) To view a mangled src_addr, eg with a IPv6 loopback address but an IPv4 family, failing the test. This would manifest as this trace from syzkaller: BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26 Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204 CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416 __list_add_valid+0x93/0xa0 lib/list_debug.c:26 __list_add include/linux/list.h:67 [inline] list_add_tail include/linux/list.h:100 [inline] cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline] rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751 ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102 ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xa30 fs/read_write.c:603 ksys_write+0x1ee/0x250 fs/read_write.c:658 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Which is indicating that an rdma_id_private was destroyed without doing cma_cancel_listens(). Instead of trying to re-use the src_addr memory to indirectly create an any address build one explicitly on the stack and bind to that as any other normal flow would do. Link: https://lore.kernel.org/r/0-v1-9fbb33f5e201+2a-cma_listen_jgg@nvidia.com Cc: stable@vger.kernel.org Fixes: 732d41c545bb ("RDMA/cma: Make the locking for automatic state transition more clear") Reported-by: syzbot+6bb0528b13611047209c@syzkaller.appspotmail.com Tested-by: Hao Sun Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cma.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 5aa58897965d..8862b0e572f0 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -3783,9 +3783,13 @@ int rdma_listen(struct rdma_cm_id *id, int backlog) int ret; if (!cma_comp_exch(id_priv, RDMA_CM_ADDR_BOUND, RDMA_CM_LISTEN)) { + struct sockaddr_in any_in = { + .sin_family = AF_INET, + .sin_addr.s_addr = htonl(INADDR_ANY), + }; + /* For a well behaved ULP state will be RDMA_CM_IDLE */ - id->route.addr.src_addr.ss_family = AF_INET; - ret = rdma_bind_addr(id, cma_src_addr(id_priv)); + ret = rdma_bind_addr(id, (struct sockaddr *)&any_in); if (ret) return ret; if (WARN_ON(!cma_comp_exch(id_priv, RDMA_CM_ADDR_BOUND, -- cgit From d81ff5fe14a950f53e2833cfa196e7bb3fd5d4e3 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 10 Sep 2021 15:33:32 -0700 Subject: x86/asm: Fix SETZ size enqcmds() build failure When building under GCC 4.9 and 5.5: arch/x86/include/asm/special_insns.h: Assembler messages: arch/x86/include/asm/special_insns.h:286: Error: operand size mismatch for `setz' Change the type to "bool" for condition code arguments, as documented. Fixes: 7f5933f81bd8 ("x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction") Co-developed-by: Arnd Bergmann Signed-off-by: Arnd Bergmann Signed-off-by: Kees Cook Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20210910223332.3224851-1-keescook@chromium.org --- arch/x86/include/asm/special_insns.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h index f3fbb84ff8a7..68c257a3de0d 100644 --- a/arch/x86/include/asm/special_insns.h +++ b/arch/x86/include/asm/special_insns.h @@ -275,7 +275,7 @@ static inline int enqcmds(void __iomem *dst, const void *src) { const struct { char _[64]; } *__src = src; struct { char _[64]; } __iomem *__dst = dst; - int zf; + bool zf; /* * ENQCMDS %(rdx), rax -- cgit From 80f6e3080bfcf865062a926817b3ca6c4a137a57 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Thu, 16 Sep 2021 13:34:24 -0700 Subject: fs-verity: fix signed integer overflow with i_size near S64_MAX If the file size is almost S64_MAX, the calculated number of Merkle tree levels exceeds FS_VERITY_MAX_LEVELS, causing FS_IOC_ENABLE_VERITY to fail. This is unintentional, since as the comment above the definition of FS_VERITY_MAX_LEVELS states, it is enough for over U64_MAX bytes of data using SHA-256 and 4K blocks. (Specifically, 4096*128**8 >= 2**64.) The bug is actually that when the number of blocks in the first level is calculated from i_size, there is a signed integer overflow due to i_size being signed. Fix this by treating i_size as unsigned. This was found by the new test "generic: test fs-verity EFBIG scenarios" (https://lkml.kernel.org/r/b1d116cd4d0ea74b9cd86f349c672021e005a75c.1631558495.git.boris@bur.io). This didn't affect ext4 or f2fs since those have a smaller maximum file size, but it did affect btrfs which allows files up to S64_MAX bytes. Reported-by: Boris Burkov Fixes: 3fda4c617e84 ("fs-verity: implement FS_IOC_ENABLE_VERITY ioctl") Fixes: fd2d1acfcadf ("fs-verity: add the hook for file ->open()") Cc: # v5.4+ Reviewed-by: Boris Burkov Link: https://lore.kernel.org/r/20210916203424.113376-1-ebiggers@kernel.org Signed-off-by: Eric Biggers --- fs/verity/enable.c | 2 +- fs/verity/open.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/verity/enable.c b/fs/verity/enable.c index 77e159a0346b..60a4372aa4d7 100644 --- a/fs/verity/enable.c +++ b/fs/verity/enable.c @@ -177,7 +177,7 @@ static int build_merkle_tree(struct file *filp, * (level 0) and ascending to the root node (level 'num_levels - 1'). * Then at the end (level 'num_levels'), calculate the root hash. */ - blocks = (inode->i_size + params->block_size - 1) >> + blocks = ((u64)inode->i_size + params->block_size - 1) >> params->log_blocksize; for (level = 0; level <= params->num_levels; level++) { err = build_merkle_tree_level(filp, level, blocks, params, diff --git a/fs/verity/open.c b/fs/verity/open.c index 60ff8af7219f..92df87f5fa38 100644 --- a/fs/verity/open.c +++ b/fs/verity/open.c @@ -89,7 +89,7 @@ int fsverity_init_merkle_tree_params(struct merkle_tree_params *params, */ /* Compute number of levels and the number of blocks in each level */ - blocks = (inode->i_size + params->block_size - 1) >> log_blocksize; + blocks = ((u64)inode->i_size + params->block_size - 1) >> log_blocksize; pr_debug("Data is %lld bytes (%llu blocks)\n", inode->i_size, blocks); while (blocks > 1) { if (params->num_levels >= FS_VERITY_MAX_LEVELS) { -- cgit From c4aa1eeb093b09fbae9329a080172c58ace8da8c Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 22 Sep 2021 14:30:01 -0500 Subject: MAINTAINERS: update entry for NIOS2 Ley Foon has left Intel and will no longer be able to maintain NIOS2. Update the MAINTAINER's entry to Dinh Nguyen. Acked-by: Ley Foon Tan Signed-off-by: Dinh Nguyen Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0227e15e2484..4806d2156a80 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13254,9 +13254,9 @@ F: Documentation/scsi/NinjaSCSI.rst F: drivers/scsi/nsp32* NIOS2 ARCHITECTURE -M: Ley Foon Tan +M: Dinh Nguyen S: Maintained -T: git git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git F: arch/nios2/ NITRO ENCLAVES (NE) -- cgit From 2e36a964ada4f7bda24f3caa971a33500e23af36 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 17 Sep 2021 12:16:51 -0400 Subject: MAINTAINERS: Update SWIOTLB maintainership Konrad's new job role is putting a serious cramp on him being a responsive maintainer and as such he is handing off the reins to Christoph Hellwig. Thank you! Acked-by: Christoph Hellwig Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4806d2156a80..a8a1b1c283e2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17968,10 +17968,11 @@ F: Documentation/admin-guide/svga.rst F: arch/x86/boot/video* SWIOTLB SUBSYSTEM -M: Konrad Rzeszutek Wilk +M: Christoph Hellwig L: iommu@lists.linux-foundation.org S: Supported -T: git git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git +W: http://git.infradead.org/users/hch/dma-mapping.git +T: git git://git.infradead.org/users/hch/dma-mapping.git F: arch/*/kernel/pci-swiotlb.c F: include/linux/swiotlb.h F: kernel/dma/swiotlb.c -- cgit From 4057525736b159bd456732d11270af2cc49ec21f Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 17 Sep 2021 12:16:52 -0400 Subject: MAINTAINERS: Update Xen-[PCI,SWIOTLB,Block] maintainership MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Konrad's new job role is putting a serious cramp on him being a responsive maintainer and as such he is handing off the reins to Juergen, Roger, and Stefano. Thank you! Acked-by: Juergen Gross Acked-by: Roger Pau Monné Acked-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Linus Torvalds --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index a8a1b1c283e2..2e75360c7b8b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20475,7 +20475,6 @@ F: samples/bpf/xdpsock* F: tools/lib/bpf/xsk* XEN BLOCK SUBSYSTEM -M: Konrad Rzeszutek Wilk M: Roger Pau Monné L: xen-devel@lists.xenproject.org (moderated for non-subscribers) S: Supported @@ -20523,7 +20522,7 @@ S: Supported F: drivers/net/xen-netback/* XEN PCI SUBSYSTEM -M: Konrad Rzeszutek Wilk +M: Juergen Gross L: xen-devel@lists.xenproject.org (moderated for non-subscribers) S: Supported F: arch/x86/pci/*xen* @@ -20546,7 +20545,8 @@ S: Supported F: sound/xen/* XEN SWIOTLB SUBSYSTEM -M: Konrad Rzeszutek Wilk +M: Juergen Gross +M: Stefano Stabellini L: xen-devel@lists.xenproject.org (moderated for non-subscribers) L: iommu@lists.linux-foundation.org S: Supported -- cgit From 58e2cf5d794616b84f591d4d1276c8953278ce24 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 1 Sep 2021 09:09:28 +0200 Subject: init: Revert accidental changes to print irqs_disabled() Commit f8ade8dddb16 ("xsurf100: drop include of lib8390.c") accidentally changed init/main.c. Revert that part. Fixes: f8ade8dddb16 ("xsurf100: drop include of lib8390.c") Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- init/main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/init/main.c b/init/main.c index 3f7216934441..81a79a77db46 100644 --- a/init/main.c +++ b/init/main.c @@ -1242,7 +1242,7 @@ trace_initcall_start_cb(void *data, initcall_t fn) { ktime_t *calltime = (ktime_t *)data; - printk(KERN_DEBUG "calling %pS @ %i irqs_disabled() %d\n", fn, task_pid_nr(current), irqs_disabled()); + printk(KERN_DEBUG "calling %pS @ %i\n", fn, task_pid_nr(current)); *calltime = ktime_get(); } @@ -1256,8 +1256,8 @@ trace_initcall_finish_cb(void *data, initcall_t fn, int ret) rettime = ktime_get(); delta = ktime_sub(rettime, *calltime); duration = (unsigned long long) ktime_to_ns(delta) >> 10; - printk(KERN_DEBUG "initcall %pS returned %d after %lld usecs, irqs_disabled() %d\n", - fn, ret, duration, irqs_disabled()); + printk(KERN_DEBUG "initcall %pS returned %d after %lld usecs\n", + fn, ret, duration); } static ktime_t initcall_calltime; -- cgit From 18a015bccf9e8927008d0a255c9f14b8ec15a648 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 22 Sep 2021 21:00:57 +0900 Subject: ksmbd: check protocol id in ksmbd_verify_smb_message() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When second smb2 pdu has invalid protocol id, ksmbd doesn't detect it and allow to process smb2 request. This patch add the check it in ksmbd_verify_smb_message() and don't use protocol id of smb2 request as protocol id of response. Reviewed-by: Ronnie Sahlberg Reviewed-by: Ralph Böhme Reported-by: Ronnie Sahlberg Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 2 +- fs/ksmbd/smb_common.c | 13 +++++++++---- fs/ksmbd/smb_common.h | 1 + 3 files changed, 11 insertions(+), 5 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index f59f9b8be51c..fd9d5595a5ca 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -433,7 +433,7 @@ static void init_chained_smb2_rsp(struct ksmbd_work *work) work->compound_pfid = KSMBD_NO_FID; } memset((char *)rsp_hdr + 4, 0, sizeof(struct smb2_hdr) + 2); - rsp_hdr->ProtocolId = rcv_hdr->ProtocolId; + rsp_hdr->ProtocolId = SMB2_PROTO_NUMBER; rsp_hdr->StructureSize = SMB2_HEADER_STRUCTURE_SIZE; rsp_hdr->Command = rcv_hdr->Command; diff --git a/fs/ksmbd/smb_common.c b/fs/ksmbd/smb_common.c index 43d3123d8b62..40f4fafa2e11 100644 --- a/fs/ksmbd/smb_common.c +++ b/fs/ksmbd/smb_common.c @@ -129,16 +129,22 @@ int ksmbd_lookup_protocol_idx(char *str) * * check for valid smb signature and packet direction(request/response) * - * Return: 0 on success, otherwise 1 + * Return: 0 on success, otherwise -EINVAL */ int ksmbd_verify_smb_message(struct ksmbd_work *work) { - struct smb2_hdr *smb2_hdr = work->request_buf; + struct smb2_hdr *smb2_hdr = work->request_buf + work->next_smb2_rcv_hdr_off; + struct smb_hdr *hdr; if (smb2_hdr->ProtocolId == SMB2_PROTO_NUMBER) return ksmbd_smb2_check_message(work); - return 0; + hdr = work->request_buf; + if (*(__le32 *)hdr->Protocol == SMB1_PROTO_NUMBER && + hdr->Command == SMB_COM_NEGOTIATE) + return 0; + + return -EINVAL; } /** @@ -265,7 +271,6 @@ static int ksmbd_negotiate_smb_dialect(void *buf) return BAD_PROT_ID; } -#define SMB_COM_NEGOTIATE 0x72 int ksmbd_init_smb_server(struct ksmbd_work *work) { struct ksmbd_conn *conn = work->conn; diff --git a/fs/ksmbd/smb_common.h b/fs/ksmbd/smb_common.h index 57c667c1be06..0a6af447cc45 100644 --- a/fs/ksmbd/smb_common.h +++ b/fs/ksmbd/smb_common.h @@ -210,6 +210,7 @@ FILE_READ_ATTRIBUTES | FILE_WRITE_ATTRIBUTES) #define SMB1_PROTO_NUMBER cpu_to_le32(0x424d53ff) +#define SMB_COM_NEGOTIATE 0x72 #define SMB1_CLIENT_GUID_SIZE (16) struct smb_hdr { -- cgit From 4ea477988c423a57241ea4840b12832de6fabdfd Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Tue, 21 Sep 2021 14:19:33 +0900 Subject: ksmbd: remove follow symlinks support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use LOOKUP_NO_SYMLINKS flags for default lookup to prohibit the middle of symlink component lookup and remove follow symlinks parameter support. We re-implement it as reparse point later. Test result: smbclient -Ulinkinjeon%1234 //172.30.1.42/share -c "get hacked/passwd passwd" NT_STATUS_OBJECT_NAME_NOT_FOUND opening remote file \hacked\passwd Cc: Ralph Böhme Cc: Steve French Acked-by: Ronnie Sahlberg Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 43 ++++++++++--------------------------------- fs/ksmbd/vfs.c | 32 +++++++++----------------------- 2 files changed, 19 insertions(+), 56 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index fd9d5595a5ca..0c49a0e887d3 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -2632,13 +2632,9 @@ int smb2_open(struct ksmbd_work *work) goto err_out1; } - if (req->CreateOptions & FILE_DELETE_ON_CLOSE_LE) { - /* - * On delete request, instead of following up, need to - * look the current entity - */ - rc = ksmbd_vfs_kern_path(name, 0, &path, 1); - if (!rc) { + rc = ksmbd_vfs_kern_path(name, LOOKUP_NO_SYMLINKS, &path, 1); + if (!rc) { + if (req->CreateOptions & FILE_DELETE_ON_CLOSE_LE) { /* * If file exists with under flags, return access * denied error. @@ -2657,25 +2653,10 @@ int smb2_open(struct ksmbd_work *work) path_put(&path); goto err_out; } - } - } else { - if (test_share_config_flag(work->tcon->share_conf, - KSMBD_SHARE_FLAG_FOLLOW_SYMLINKS)) { - /* - * Use LOOKUP_FOLLOW to follow the path of - * symlink in path buildup - */ - rc = ksmbd_vfs_kern_path(name, LOOKUP_FOLLOW, &path, 1); - if (rc) { /* Case for broken link ?*/ - rc = ksmbd_vfs_kern_path(name, 0, &path, 1); - } - } else { - rc = ksmbd_vfs_kern_path(name, 0, &path, 1); - if (!rc && d_is_symlink(path.dentry)) { - rc = -EACCES; - path_put(&path); - goto err_out; - } + } else if (d_is_symlink(path.dentry)) { + rc = -EACCES; + path_put(&path); + goto err_out; } } @@ -4751,12 +4732,8 @@ static int smb2_get_info_filesystem(struct ksmbd_work *work, struct path path; int rc = 0, len; int fs_infoclass_size = 0; - int lookup_flags = 0; - - if (test_share_config_flag(share, KSMBD_SHARE_FLAG_FOLLOW_SYMLINKS)) - lookup_flags = LOOKUP_FOLLOW; - rc = ksmbd_vfs_kern_path(share->path, lookup_flags, &path, 0); + rc = ksmbd_vfs_kern_path(share->path, LOOKUP_NO_SYMLINKS, &path, 0); if (rc) { pr_err("cannot create vfs path\n"); return -EIO; @@ -5333,7 +5310,7 @@ static int smb2_rename(struct ksmbd_work *work, } ksmbd_debug(SMB, "new name %s\n", new_name); - rc = ksmbd_vfs_kern_path(new_name, 0, &path, 1); + rc = ksmbd_vfs_kern_path(new_name, LOOKUP_NO_SYMLINKS, &path, 1); if (rc) file_present = false; else @@ -5407,7 +5384,7 @@ static int smb2_create_link(struct ksmbd_work *work, } ksmbd_debug(SMB, "target name is %s\n", target_name); - rc = ksmbd_vfs_kern_path(link_name, 0, &path, 0); + rc = ksmbd_vfs_kern_path(link_name, LOOKUP_NO_SYMLINKS, &path, 0); if (rc) file_present = false; else diff --git a/fs/ksmbd/vfs.c b/fs/ksmbd/vfs.c index b047f2980d96..3733e4944c1d 100644 --- a/fs/ksmbd/vfs.c +++ b/fs/ksmbd/vfs.c @@ -166,7 +166,7 @@ int ksmbd_vfs_create(struct ksmbd_work *work, const char *name, umode_t mode) struct dentry *dentry; int err; - dentry = kern_path_create(AT_FDCWD, name, &path, 0); + dentry = kern_path_create(AT_FDCWD, name, &path, LOOKUP_NO_SYMLINKS); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); if (err != -ENOENT) @@ -203,7 +203,8 @@ int ksmbd_vfs_mkdir(struct ksmbd_work *work, const char *name, umode_t mode) struct dentry *dentry; int err; - dentry = kern_path_create(AT_FDCWD, name, &path, LOOKUP_DIRECTORY); + dentry = kern_path_create(AT_FDCWD, name, &path, + LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); if (err != -EEXIST) @@ -588,16 +589,11 @@ int ksmbd_vfs_remove_file(struct ksmbd_work *work, char *name) struct path path; struct dentry *parent; int err; - int flags = 0; if (ksmbd_override_fsids(work)) return -ENOMEM; - if (test_share_config_flag(work->tcon->share_conf, - KSMBD_SHARE_FLAG_FOLLOW_SYMLINKS)) - flags = LOOKUP_FOLLOW; - - err = kern_path(name, flags, &path); + err = kern_path(name, LOOKUP_NO_SYMLINKS, &path); if (err) { ksmbd_debug(VFS, "can't get %s, err %d\n", name, err); ksmbd_revert_fsids(work); @@ -652,16 +648,11 @@ int ksmbd_vfs_link(struct ksmbd_work *work, const char *oldname, struct path oldpath, newpath; struct dentry *dentry; int err; - int flags = 0; if (ksmbd_override_fsids(work)) return -ENOMEM; - if (test_share_config_flag(work->tcon->share_conf, - KSMBD_SHARE_FLAG_FOLLOW_SYMLINKS)) - flags = LOOKUP_FOLLOW; - - err = kern_path(oldname, flags, &oldpath); + err = kern_path(oldname, LOOKUP_NO_SYMLINKS, &oldpath); if (err) { pr_err("cannot get linux path for %s, err = %d\n", oldname, err); @@ -669,7 +660,7 @@ int ksmbd_vfs_link(struct ksmbd_work *work, const char *oldname, } dentry = kern_path_create(AT_FDCWD, newname, &newpath, - flags | LOOKUP_REVAL); + LOOKUP_NO_SYMLINKS | LOOKUP_REVAL); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); pr_err("path create err for %s, err %d\n", newname, err); @@ -788,7 +779,6 @@ int ksmbd_vfs_fp_rename(struct ksmbd_work *work, struct ksmbd_file *fp, struct dentry *src_dent, *trap_dent, *src_child; char *dst_name; int err; - int flags; dst_name = extract_last_component(newname); if (!dst_name) @@ -797,12 +787,8 @@ int ksmbd_vfs_fp_rename(struct ksmbd_work *work, struct ksmbd_file *fp, src_dent_parent = dget_parent(fp->filp->f_path.dentry); src_dent = fp->filp->f_path.dentry; - flags = LOOKUP_DIRECTORY; - if (test_share_config_flag(work->tcon->share_conf, - KSMBD_SHARE_FLAG_FOLLOW_SYMLINKS)) - flags |= LOOKUP_FOLLOW; - - err = kern_path(newname, flags, &dst_path); + err = kern_path(newname, LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY, + &dst_path); if (err) { ksmbd_debug(VFS, "Cannot get path for %s [%d]\n", newname, err); goto out; @@ -861,7 +847,7 @@ int ksmbd_vfs_truncate(struct ksmbd_work *work, const char *name, int err = 0; if (name) { - err = kern_path(name, 0, &path); + err = kern_path(name, LOOKUP_NO_SYMLINKS, &path); if (err) { pr_err("cannot get linux path for %s, err %d\n", name, err); -- cgit From 09d23174402da0f10e98da2c61bb5ac8e7d79fdd Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 20 Sep 2021 19:18:50 +0200 Subject: ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION The new framing mode causes the user space regression, because the alsa-lib code does not initialize the reserved space in the params structure when the device is opened. This change adds SNDRV_RAWMIDI_IOCTL_USER_PVERSION like we do for the PCM interface for the protocol acknowledgment. Cc: David Henningsson Cc: Fixes: 08fdced60ca0 ("ALSA: rawmidi: Add framing mode") BugLink: https://github.com/alsa-project/alsa-lib/issues/178 Signed-off-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20210920171850.154186-1-perex@perex.cz Signed-off-by: Takashi Iwai --- include/sound/rawmidi.h | 1 + include/uapi/sound/asound.h | 1 + sound/core/rawmidi.c | 9 +++++++++ 3 files changed, 11 insertions(+) diff --git a/include/sound/rawmidi.h b/include/sound/rawmidi.h index 989e1517332d..7a08ed2acd60 100644 --- a/include/sound/rawmidi.h +++ b/include/sound/rawmidi.h @@ -98,6 +98,7 @@ struct snd_rawmidi_file { struct snd_rawmidi *rmidi; struct snd_rawmidi_substream *input; struct snd_rawmidi_substream *output; + unsigned int user_pversion; /* supported protocol version */ }; struct snd_rawmidi_str { diff --git a/include/uapi/sound/asound.h b/include/uapi/sound/asound.h index 1d84ec9db93b..5859ca0a1439 100644 --- a/include/uapi/sound/asound.h +++ b/include/uapi/sound/asound.h @@ -784,6 +784,7 @@ struct snd_rawmidi_status { #define SNDRV_RAWMIDI_IOCTL_PVERSION _IOR('W', 0x00, int) #define SNDRV_RAWMIDI_IOCTL_INFO _IOR('W', 0x01, struct snd_rawmidi_info) +#define SNDRV_RAWMIDI_IOCTL_USER_PVERSION _IOW('W', 0x02, int) #define SNDRV_RAWMIDI_IOCTL_PARAMS _IOWR('W', 0x10, struct snd_rawmidi_params) #define SNDRV_RAWMIDI_IOCTL_STATUS _IOWR('W', 0x20, struct snd_rawmidi_status) #define SNDRV_RAWMIDI_IOCTL_DROP _IOW('W', 0x30, int) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 6c0a4a67ad2e..6f30231bdb88 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -873,12 +873,21 @@ static long snd_rawmidi_ioctl(struct file *file, unsigned int cmd, unsigned long return -EINVAL; } } + case SNDRV_RAWMIDI_IOCTL_USER_PVERSION: + if (get_user(rfile->user_pversion, (unsigned int __user *)arg)) + return -EFAULT; + return 0; + case SNDRV_RAWMIDI_IOCTL_PARAMS: { struct snd_rawmidi_params params; if (copy_from_user(¶ms, argp, sizeof(struct snd_rawmidi_params))) return -EFAULT; + if (rfile->user_pversion < SNDRV_PROTOCOL_VERSION(2, 0, 2)) { + params.mode = 0; + memset(params.reserved, 0, sizeof(params.reserved)); + } switch (params.stream) { case SNDRV_RAWMIDI_STREAM_OUTPUT: if (rfile->output == NULL) -- cgit From c32dfec6c1c36bbbcd5d33e949d99aeb215877ec Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 22 Sep 2021 13:30:59 +0200 Subject: USB: serial: cp210x: fix dropped characters with CP2102 Some CP2102 do not support event-insertion mode but return no error when attempting to enable it. This means that any event escape characters in the input stream will not be escaped by the device and consequently regular data may be interpreted as escape sequences and be removed from the stream by the driver. The reporter's device has batch number DCL00X etched into it and as discovered by the SHA2017 Badge team, counterfeit devices with that marking can be detected by sending malformed vendor requests. [1][2] Tests confirm that the possibly counterfeit CP2102 returns a single byte in response to a malformed two-byte part-number request, while an original CP2102 returns two bytes. Assume that every CP2102 that behaves this way also does not support event-insertion mode (e.g. cannot report parity errors). [1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418 [2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376 Reported-by: Malte Di Donato Tested-by: Malte Di Donato Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events") Cc: stable@vger.kernel.org # 5.9 Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 66a6ac50a4cd..b98454fe08ea 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -258,6 +258,7 @@ struct cp210x_serial_private { speed_t max_speed; bool use_actual_rate; bool no_flow_control; + bool no_event_mode; }; enum cp210x_event_state { @@ -1113,12 +1114,16 @@ static void cp210x_change_speed(struct tty_struct *tty, static void cp210x_enable_event_mode(struct usb_serial_port *port) { + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); int ret; if (port_priv->event_mode) return; + if (priv->no_event_mode) + return; + port_priv->event_state = ES_DATA; port_priv->event_mode = true; @@ -2074,6 +2079,33 @@ static void cp210x_init_max_speed(struct usb_serial *serial) priv->use_actual_rate = use_actual_rate; } +static void cp2102_determine_quirks(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + u8 *buf; + int ret; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return; + /* + * Some (possibly counterfeit) CP2102 do not support event-insertion + * mode and respond differently to malformed vendor requests. + * Specifically, they return one instead of two bytes when sent a + * two-byte part-number request. + */ + ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + CP210X_VENDOR_SPECIFIC, REQTYPE_DEVICE_TO_HOST, + CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT); + if (ret == 1) { + dev_dbg(&serial->interface->dev, + "device does not support event-insertion mode\n"); + priv->no_event_mode = true; + } + + kfree(buf); +} + static int cp210x_get_fw_version(struct usb_serial *serial, u16 value) { struct cp210x_serial_private *priv = usb_get_serial_data(serial); @@ -2109,6 +2141,9 @@ static void cp210x_determine_type(struct usb_serial *serial) } switch (priv->partnum) { + case CP210X_PARTNUM_CP2102: + cp2102_determine_quirks(serial); + break; case CP210X_PARTNUM_CP2105: case CP210X_PARTNUM_CP2108: cp210x_get_fw_version(serial, CP210X_GET_FW_VER); -- cgit From 90ca6e7db83a06e9173bee5bb34ded3b37f4948d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 22 Sep 2021 13:31:00 +0200 Subject: USB: serial: cp210x: add part-number debug printk Add a part-number debug printk to facilitate debugging. Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index b98454fe08ea..fd51498ab108 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -2140,6 +2140,8 @@ static void cp210x_determine_type(struct usb_serial *serial) return; } + dev_dbg(&serial->interface->dev, "partnum = 0x%02x\n", priv->partnum); + switch (priv->partnum) { case CP210X_PARTNUM_CP2102: cp2102_determine_quirks(serial); -- cgit From 8cd9da85d2bd87ce889043e7b1735723dd10eb89 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Mon, 13 Sep 2021 16:53:32 +0200 Subject: posix-cpu-timers: Prevent spuriously armed 0-value itimer Resetting/stopping an itimer eventually leads to it being reprogrammed with an actual "0" value. As a result the itimer expires on the next tick, triggering an unexpected signal. To fix this, make sure that struct signal_struct::it[CPUCLOCK_PROF/VIRT]::expires is set to 0 when setitimer() passes a 0 it_value, indicating that the timer must stop. Fixes: 406dd42bd1ba ("posix-cpu-timers: Force next expiration recalc after itimer reset") Reported-by: Victor Stinner Reported-by: Chris Hixon Signed-off-by: Frederic Weisbecker Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20210913145332.232023-1-frederic@kernel.org --- kernel/time/posix-cpu-timers.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c index ee736861b18f..643d412ac623 100644 --- a/kernel/time/posix-cpu-timers.c +++ b/kernel/time/posix-cpu-timers.c @@ -1404,7 +1404,8 @@ void set_process_cpu_timer(struct task_struct *tsk, unsigned int clkid, } } - *newval += now; + if (*newval) + *newval += now; } /* -- cgit From 98d46b021f6ee246c7a73f9d490d4cddb4511a3b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 6 Sep 2021 10:35:59 +0200 Subject: Revert "mac80211: do not use low data rates for data frames with no ack flag" This reverts commit d333322361e7 ("mac80211: do not use low data rates for data frames with no ack flag"). Returning false early in rate_control_send_low breaks sending broadcast packets, since rate control will not select a rate for it. Before re-introducing a fixed version of this patch, we should probably also make some changes to rate control to be more conservative in selecting rates for no-ack packets and also prevent using probing rates on them, since we won't get any feedback. Fixes: d333322361e7 ("mac80211: do not use low data rates for data frames with no ack flag") Signed-off-by: Felix Fietkau Link: https://lore.kernel.org/r/20210906083559.9109-1-nbd@nbd.name Signed-off-by: Johannes Berg --- net/mac80211/rate.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index e5935e3d7a07..8c6416129d5b 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -392,10 +392,6 @@ static bool rate_control_send_low(struct ieee80211_sta *pubsta, int mcast_rate; bool use_basicrate = false; - if (ieee80211_is_tx_data(txrc->skb) && - info->flags & IEEE80211_TX_CTL_NO_ACK) - return false; - if (!pubsta || rc_no_data_or_no_ack_use_min(txrc)) { __rate_control_send_low(txrc->hw, sband, pubsta, info, txrc->rate_idx_mask); -- cgit From fe94bac626d9c1c5bc98ab32707be8a9d7f8adba Mon Sep 17 00:00:00 2001 From: Chih-Kang Chang Date: Mon, 30 Aug 2021 15:32:40 +0800 Subject: mac80211: Fix ieee80211_amsdu_aggregate frag_tail bug In ieee80211_amsdu_aggregate() set a pointer frag_tail point to the end of skb_shinfo(head)->frag_list, and use it to bind other skb in the end of this function. But when execute ieee80211_amsdu_aggregate() ->ieee80211_amsdu_realloc_pad()->pskb_expand_head(), the address of skb_shinfo(head)->frag_list will be changed. However, the ieee80211_amsdu_aggregate() not update frag_tail after call pskb_expand_head(). That will cause the second skb can't bind to the head skb appropriately.So we update the address of frag_tail to fix it. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Chih-Kang Chang Signed-off-by: Zong-Zhe Yang Signed-off-by: Ping-Ke Shih Link: https://lore.kernel.org/r/20210830073240.12736-1-pkshih@realtek.com [reword comment] Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2d1193ed3eb5..824bed71be13 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -3380,6 +3380,14 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head)) goto out; + /* If n == 2, the "while (*frag_tail)" loop above didn't execute + * and frag_tail should be &skb_shinfo(head)->frag_list. + * However, ieee80211_amsdu_prepare_head() can reallocate it. + * Reload frag_tail to have it pointing to the correct place. + */ + if (n == 2) + frag_tail = &skb_shinfo(head)->frag_list; + /* * Pad out the previous subframe to a multiple of 4 by adding the * padding to the next one, that's being added. Note that head->len -- cgit From a6555f844549cd190eb060daef595f94d3de1582 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 27 Aug 2021 22:42:30 +0800 Subject: mac80211: Drop frames from invalid MAC address in ad-hoc mode WARNING: CPU: 1 PID: 9 at net/mac80211/sta_info.c:554 sta_info_insert_rcu+0x121/0x12a0 Modules linked in: CPU: 1 PID: 9 Comm: kworker/u8:1 Not tainted 5.14.0-rc7+ #253 Workqueue: phy3 ieee80211_iface_work RIP: 0010:sta_info_insert_rcu+0x121/0x12a0 ... Call Trace: ieee80211_ibss_finish_sta+0xbc/0x170 ieee80211_ibss_work+0x13f/0x7d0 ieee80211_iface_work+0x37a/0x500 process_one_work+0x357/0x850 worker_thread+0x41/0x4d0 If an Ad-Hoc node receives packets with invalid source MAC address, it hits a WARN_ON in sta_info_insert_check(), this can spam the log. Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20210827144230.39944-1-yuehaibing@huawei.com Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 99ed68f7dc36..c4071b015c18 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -4131,7 +4131,8 @@ static bool ieee80211_accept_frame(struct ieee80211_rx_data *rx) if (!bssid) return false; if (ether_addr_equal(sdata->vif.addr, hdr->addr2) || - ether_addr_equal(sdata->u.ibss.bssid, hdr->addr2)) + ether_addr_equal(sdata->u.ibss.bssid, hdr->addr2) || + !is_valid_ether_addr(hdr->addr2)) return false; if (ieee80211_is_beacon(hdr->frame_control)) return true; -- cgit From 13cb6d826e0ac0d144b0d48191ff1a111d32f0c6 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Mon, 20 Sep 2021 14:45:22 +0200 Subject: mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap routine in order to fix the following warning reported by syzbot: WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 Modules linked in: CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216 RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000 RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100 R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8 R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004 FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165 __bpf_tx_skb net/core/filter.c:2114 [inline] __bpf_redirect_no_mac net/core/filter.c:2139 [inline] __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162 ____bpf_clone_redirect net/core/filter.c:2429 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline] __bpf_prog_run include/linux/filter.h:624 [inline] bpf_prog_run include/linux/filter.h:631 [inline] bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline] __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Reported-by: syzbot+0196ac871673f0c20f68@syzkaller.appspotmail.com Fixes: 646e76bb5daf4 ("mac80211: parse VHT info in injected frames") Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/c26c3f02dcb38ab63b2f2534cb463d95ee81bb13.1632141760.git.lorenzo@kernel.org Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 824bed71be13..8921088a5df6 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2209,7 +2209,11 @@ bool ieee80211_parse_tx_radiotap(struct sk_buff *skb, } vht_mcs = iterator.this_arg[4] >> 4; + if (vht_mcs > 11) + vht_mcs = 0; vht_nss = iterator.this_arg[4] & 0xF; + if (!vht_nss || vht_nss > 8) + vht_nss = 1; break; /* -- cgit From b9731062ce8afd35cf723bf3a8ad55d208f915a5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 20 Sep 2021 15:40:05 +0200 Subject: mac80211: mesh: fix potentially unaligned access The pointer here points directly into the frame, so the access is potentially unaligned. Use get_unaligned_le16 to avoid that. Fixes: 3f52b7e328c5 ("mac80211: mesh power save basics") Link: https://lore.kernel.org/r/20210920154009.3110ff75be0c.Ib6a2ff9e9cc9bc6fca50fce631ec1ce725cc926b@changeid Signed-off-by: Johannes Berg --- net/mac80211/mesh_ps.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c index 204830a55240..3fbd0b9ff913 100644 --- a/net/mac80211/mesh_ps.c +++ b/net/mac80211/mesh_ps.c @@ -2,6 +2,7 @@ /* * Copyright 2012-2013, Marco Porsch * Copyright 2012-2013, cozybit Inc. + * Copyright (C) 2021 Intel Corporation */ #include "mesh.h" @@ -588,7 +589,7 @@ void ieee80211_mps_frame_release(struct sta_info *sta, /* only transmit to PS STA with announced, non-zero awake window */ if (test_sta_flag(sta, WLAN_STA_PS_STA) && - (!elems->awake_window || !le16_to_cpu(*elems->awake_window))) + (!elems->awake_window || !get_unaligned_le16(elems->awake_window))) return; if (!test_sta_flag(sta, WLAN_STA_MPSP_OWNER)) -- cgit From 313bbd1990b6ddfdaa7da098d0c56b098a833572 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 15 Sep 2021 11:29:37 +0200 Subject: mac80211-hwsim: fix late beacon hrtimer handling Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx that our handling of the hrtimer here is wrong: If the timer fires late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot) then it tries to actually rearm the timer at the next deadline, which might be in the past already: 1 2 3 N N+1 | | | ... | | ^ intended to fire here (1) ^ next deadline here (2) ^ actually fired here The next time it fires, it's later, but will still try to schedule for the next deadline (now 3), etc. until it catches up with N, but that might take a long time, causing stalls etc. Now, all of this is simulation, so we just have to fix it, but note that the behaviour is wrong even per spec, since there's no value then in sending all those beacons unaligned - they should be aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a bit (or a lot) late, then just resume at that point. Therefore, change the code to use hrtimer_forward_now() which will ensure that the next firing of the timer would be at N+1 (in the picture), i.e. the next interval point after the current time. Suggested-by: Thomas Gleixner Reported-by: Dmitry Vyukov Reported-by: syzbot+0e964fad69a9c462bc1e@syzkaller.appspotmail.com Fixes: 01e59e467ecf ("mac80211_hwsim: hrtimer beacon") Reviewed-by: Thomas Gleixner Link: https://lore.kernel.org/r/20210915112936.544f383472eb.I3f9712009027aa09244b65399bf18bf482a8c4f1@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index ffa894f7312a..0adae76eb8df 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1867,8 +1867,8 @@ mac80211_hwsim_beacon(struct hrtimer *timer) bcn_int -= data->bcn_delta; data->bcn_delta = 0; } - hrtimer_forward(&data->beacon_timer, hrtimer_get_expires(timer), - ns_to_ktime(bcn_int * NSEC_PER_USEC)); + hrtimer_forward_now(&data->beacon_timer, + ns_to_ktime(bcn_int * NSEC_PER_USEC)); return HRTIMER_RESTART; } -- cgit From 3106a0847525befe3e22fc723909d1b21eb0d520 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 22 Sep 2021 13:25:40 +0300 Subject: nexthop: Fix memory leaks in nexthop notification chain listeners syzkaller discovered memory leaks [1] that can be reduced to the following commands: # ip nexthop add id 1 blackhole # devlink dev reload pci/0000:06:00.0 As part of the reload flow, mlxsw will unregister its netdevs and then unregister from the nexthop notification chain. Before unregistering from the notification chain, mlxsw will receive delete notifications for nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw will not receive notifications for nexthops using netdevs that are not dismantled as part of the reload flow. For example, the blackhole nexthop above that internally uses the loopback netdev as its nexthop device. One way to fix this problem is to have listeners flush their nexthop tables after unregistering from the notification chain. This is error-prone as evident by this patch and also not symmetric with the registration path where a listener receives a dump of all the existing nexthops. Therefore, fix this problem by replaying delete notifications for the listener being unregistered. This is symmetric to the registration path and also consistent with the netdev notification chain. The above means that unregister_nexthop_notifier(), like register_nexthop_notifier(), will have to take RTNL in order to iterate over the existing nexthops and that any callers of the function cannot hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN driver. To avoid a deadlock, change the latter to unregister its nexthop listener without holding RTNL, making it symmetric to the registration path. [1] unreferenced object 0xffff88806173d600 (size 512): comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s) hex dump (first 32 bytes): 41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff A..`......sa.... 08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00 ..sa............ backtrace: [] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522 [] slab_alloc_node mm/slub.c:3206 [inline] [] slab_alloc mm/slub.c:3214 [inline] [] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231 [] kmalloc include/linux/slab.h:591 [inline] [] kzalloc include/linux/slab.h:721 [inline] [] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline] [] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline] [] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239 [] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83 [] blocking_notifier_call_chain kernel/notifier.c:318 [inline] [] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306 [] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244 [] insert_nexthop net/ipv4/nexthop.c:2336 [inline] [] nexthop_add net/ipv4/nexthop.c:2644 [inline] [] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913 [] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572 [] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504 [] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590 [] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340 [] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929 [] sock_sendmsg_nosec net/socket.c:704 [inline] [] sock_sendmsg net/socket.c:724 [inline] [] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409 [] ___sys_sendmsg+0x104/0x170 net/socket.c:2463 [] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492 [] __do_sys_sendmsg net/socket.c:2501 [inline] [] __se_sys_sendmsg net/socket.c:2499 [inline] [] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499 Fixes: 2a014b200bbd ("mlxsw: spectrum_router: Add support for nexthop objects") Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 +- net/ipv4/nexthop.c | 19 ++++++++++++++----- 2 files changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 5a8df5a195cb..141635a35c28 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -4756,12 +4756,12 @@ static void __net_exit vxlan_exit_batch_net(struct list_head *net_list) LIST_HEAD(list); unsigned int h; - rtnl_lock(); list_for_each_entry(net, net_list, exit_list) { struct vxlan_net *vn = net_generic(net, vxlan_net_id); unregister_nexthop_notifier(net, &vn->nexthop_notifier_block); } + rtnl_lock(); list_for_each_entry(net, net_list, exit_list) vxlan_destroy_tunnels(net, &list); diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c index 0e75fd3e57b4..9e8100728d46 100644 --- a/net/ipv4/nexthop.c +++ b/net/ipv4/nexthop.c @@ -3567,6 +3567,7 @@ static struct notifier_block nh_netdev_notifier = { }; static int nexthops_dump(struct net *net, struct notifier_block *nb, + enum nexthop_event_type event_type, struct netlink_ext_ack *extack) { struct rb_root *root = &net->nexthop.rb_root; @@ -3577,8 +3578,7 @@ static int nexthops_dump(struct net *net, struct notifier_block *nb, struct nexthop *nh; nh = rb_entry(node, struct nexthop, rb_node); - err = call_nexthop_notifier(nb, net, NEXTHOP_EVENT_REPLACE, nh, - extack); + err = call_nexthop_notifier(nb, net, event_type, nh, extack); if (err) break; } @@ -3592,7 +3592,7 @@ int register_nexthop_notifier(struct net *net, struct notifier_block *nb, int err; rtnl_lock(); - err = nexthops_dump(net, nb, extack); + err = nexthops_dump(net, nb, NEXTHOP_EVENT_REPLACE, extack); if (err) goto unlock; err = blocking_notifier_chain_register(&net->nexthop.notifier_chain, @@ -3605,8 +3605,17 @@ EXPORT_SYMBOL(register_nexthop_notifier); int unregister_nexthop_notifier(struct net *net, struct notifier_block *nb) { - return blocking_notifier_chain_unregister(&net->nexthop.notifier_chain, - nb); + int err; + + rtnl_lock(); + err = blocking_notifier_chain_unregister(&net->nexthop.notifier_chain, + nb); + if (err) + goto unlock; + nexthops_dump(net, nb, NEXTHOP_EVENT_DEL, NULL); +unlock: + rtnl_unlock(); + return err; } EXPORT_SYMBOL(unregister_nexthop_notifier); -- cgit From 5b099870c8e0eb026a1560894d94f827832491cf Mon Sep 17 00:00:00 2001 From: Guvenc Gulce Date: Wed, 22 Sep 2021 19:21:29 +0200 Subject: MAINTAINERS: remove Guvenc Gulce as net/smc maintainer Remove myself as net/smc maintainer, as I am leaving IBM soon and can not maintain net/smc anymore. Cc: Julian Wiedmann Acked-by: Karsten Graul Signed-off-by: Guvenc Gulce Signed-off-by: David S. Miller --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index eeb4c70b3d5b..3c814976443e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16955,7 +16955,6 @@ F: drivers/misc/sgi-xp/ SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS M: Karsten Graul -M: Guvenc Gulce L: linux-s390@vger.kernel.org S: Supported W: http://www.ibm.com/developerworks/linux/linux390/ -- cgit From 31339440b2d0a4987030aac026adbaba44e22490 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 22 Sep 2021 19:30:37 +0100 Subject: nfc: st-nci: Add SPI ID matching DT compatible Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding the part name used in the compatible to the list of SPI IDs. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Signed-off-by: David S. Miller --- drivers/nfc/st-nci/spi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/nfc/st-nci/spi.c b/drivers/nfc/st-nci/spi.c index a620c34790e6..0875b773fb41 100644 --- a/drivers/nfc/st-nci/spi.c +++ b/drivers/nfc/st-nci/spi.c @@ -278,6 +278,7 @@ static int st_nci_spi_remove(struct spi_device *dev) static struct spi_device_id st_nci_spi_id_table[] = { {ST_NCI_SPI_DRIVER_NAME, 0}, + {"st21nfcb-spi", 0}, {} }; MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table); -- cgit From e68daf61ed13832aef8892200a874139700ca754 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 22 Sep 2021 16:55:48 -0700 Subject: net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries Sometimes multiple CLS_REPLACE calls are issued for the same connection. rhashtable_insert_fast does not check for these duplicates, so multiple hardware flow entries can be created. Fix this by checking for an existing entry early Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Signed-off-by: Felix Fietkau Signed-off-by: Ilya Lipnitskiy Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_ppe_offload.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c index b5f68f66d42a..7bb1f20002b5 100644 --- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c +++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c @@ -186,6 +186,9 @@ mtk_flow_offload_replace(struct mtk_eth *eth, struct flow_cls_offload *f) int hash; int i; + if (rhashtable_lookup(ð->flow_table, &f->cookie, mtk_flow_ht_params)) + return -EEXIST; + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_META)) { struct flow_match_meta match; -- cgit From acc64f52afac15e9e44d9b5253271346841786e0 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 22 Sep 2021 19:03:38 -0700 Subject: net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled The blamed commit made the fatally incorrect assumption that ports which aren't in the FORWARDING STP state should not have packets forwarded towards them, and that is all that needs to be done. However, that logic alone permits BLOCKING ports to forward to FORWARDING ports, which of course allows packet storms to occur when there is an L2 loop. The ocelot_get_bridge_fwd_mask should not only ask "what can the bridge do for you", but "what can you do for the bridge". This way, only FORWARDING ports forward to the other FORWARDING ports from the same bridging domain, and we are still compatible with the idea of multiple bridges. Fixes: df291e54ccca ("net: ocelot: support multiple bridges") Suggested-by: Colin Foster Reported-by: Colin Foster Signed-off-by: Vladimir Oltean Signed-off-by: Colin Foster Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 729ba826ba17..559177e6ded4 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -1293,14 +1293,19 @@ static u32 ocelot_get_bond_mask(struct ocelot *ocelot, struct net_device *bond, return mask; } -static u32 ocelot_get_bridge_fwd_mask(struct ocelot *ocelot, +static u32 ocelot_get_bridge_fwd_mask(struct ocelot *ocelot, int src_port, struct net_device *bridge) { + struct ocelot_port *ocelot_port = ocelot->ports[src_port]; u32 mask = 0; int port; + if (!ocelot_port || ocelot_port->bridge != bridge || + ocelot_port->stp_state != BR_STATE_FORWARDING) + return 0; + for (port = 0; port < ocelot->num_phys_ports; port++) { - struct ocelot_port *ocelot_port = ocelot->ports[port]; + ocelot_port = ocelot->ports[port]; if (!ocelot_port) continue; @@ -1366,7 +1371,7 @@ void ocelot_apply_bridge_fwd_mask(struct ocelot *ocelot) struct net_device *bridge = ocelot_port->bridge; struct net_device *bond = ocelot_port->bond; - mask = ocelot_get_bridge_fwd_mask(ocelot, bridge); + mask = ocelot_get_bridge_fwd_mask(ocelot, port, bridge); mask |= cpu_fwd_mask; mask &= ~BIT(port); if (bond) { -- cgit From fdbccea419dc782079ce5881d2705cc9e3881480 Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Thu, 23 Sep 2021 09:51:45 +0300 Subject: net/mlx4_en: Don't allow aRFS for encapsulated packets Driver doesn't support aRFS for encapsulated packets, return early error in such a case. Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support") Signed-off-by: Aya Levin Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 35154635ec3a..8af7f2827322 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -372,6 +372,9 @@ mlx4_en_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb, int nhoff = skb_network_offset(skb); int ret = 0; + if (skb->encapsulation) + return -EPROTONOSUPPORT; + if (skb->protocol != htons(ETH_P_IP)) return -EPROTONOSUPPORT; -- cgit From 4d88c339c423eefe2fd48215016cb0c75fcb4c4d Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Thu, 23 Sep 2021 03:16:05 -0700 Subject: atlantic: Fix issue in the pm resume flow. After fixing hibernation resume flow, another usecase was found which should be explicitly handled - resume when device is in "down" state. Invoke aq_nic_init jointly with aq_nic_start only if ndev was already up during suspend/hibernate. We still need to perform nic_deinit() if caller requests for it, to handle the freeze/resume scenarios. Fixes: 57f780f1c433 ("atlantic: Fix driver resume flow.") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c index dee9ff74d6d6..d4b1976ee69b 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c @@ -413,13 +413,13 @@ static int atl_resume_common(struct device *dev, bool deep) if (deep) { /* Reinitialize Nic/Vecs objects */ aq_nic_deinit(nic, !nic->aq_hw->aq_nic_cfg->wol); + } + if (netif_running(nic->ndev)) { ret = aq_nic_init(nic); if (ret) goto err_exit; - } - if (netif_running(nic->ndev)) { ret = aq_nic_start(nic); if (ret) goto err_exit; -- cgit From 22b70e6f2da0a4c8b1421b00cfc3016bc9d4d9d4 Mon Sep 17 00:00:00 2001 From: dann frazier Date: Thu, 23 Sep 2021 08:50:02 -0600 Subject: arm64: Restore forced disabling of KPTI on ThunderX A noted side-effect of commit 0c6c2d3615ef ("arm64: Generate cpucaps.h") is that cpucaps are now sorted, changing the enumeration order. This assumed no dependencies between cpucaps, which turned out not to be true in one case. UNMAP_KERNEL_AT_EL0 currently needs to be processed after WORKAROUND_CAVIUM_27456. ThunderX systems are incompatible with KPTI, so unmap_kernel_at_el0() bails if WORKAROUND_CAVIUM_27456 is set. But because of the sorting, WORKAROUND_CAVIUM_27456 will not yet have been considered when unmap_kernel_at_el0() checks for it, so the kernel tries to run w/ KPTI - and quickly falls over. Because all ThunderX implementations have homogeneous CPUs, we can remove this dependency by just checking the current CPU for the erratum. Fixes: 0c6c2d3615ef ("arm64: Generate cpucaps.h") Cc: # 5.13.x Signed-off-by: dann frazier Suggested-by: Suzuki K Poulose Reviewed-by: Suzuki K Poulose Reviewed-by: Mark Brown Acked-by: Marc Zyngier Link: https://lore.kernel.org/r/20210923145002.3394558-1-dann.frazier@canonical.com Signed-off-by: Catalin Marinas --- arch/arm64/kernel/cpufeature.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index f8a3067d10c6..6ec7036ef7e1 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1526,9 +1526,13 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry, /* * For reasons that aren't entirely clear, enabling KPTI on Cavium * ThunderX leads to apparent I-cache corruption of kernel text, which - * ends as well as you might imagine. Don't even try. + * ends as well as you might imagine. Don't even try. We cannot rely + * on the cpus_have_*cap() helpers here to detect the CPU erratum + * because cpucap detection order may change. However, since we know + * affected CPUs are always in a homogeneous configuration, it is + * safe to rely on this_cpu_has_cap() here. */ - if (cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_27456)) { + if (this_cpu_has_cap(ARM64_WORKAROUND_CAVIUM_27456)) { str = "ARM64_WORKAROUND_CAVIUM_27456"; __kpti_forced = -1; } -- cgit From 93368aab0efc87288cac65e99c9ed2e0ffc9e7d0 Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Tue, 21 Sep 2021 22:35:30 +0800 Subject: erofs: fix up erofs_lookup tracepoint Fix up a misuse that the filename pointer isn't always valid in the ring buffer, and we should copy the content instead. Link: https://lore.kernel.org/r/20210921143531.81356-1-hsiangkao@linux.alibaba.com Fixes: 13f06f48f7bf ("staging: erofs: support tracepoint") Cc: stable@vger.kernel.org # 4.19+ Reviewed-by: Chao Yu Signed-off-by: Gao Xiang --- include/trace/events/erofs.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/trace/events/erofs.h b/include/trace/events/erofs.h index bf9806fd1306..db4f2cec8360 100644 --- a/include/trace/events/erofs.h +++ b/include/trace/events/erofs.h @@ -35,20 +35,20 @@ TRACE_EVENT(erofs_lookup, TP_STRUCT__entry( __field(dev_t, dev ) __field(erofs_nid_t, nid ) - __field(const char *, name ) + __string(name, dentry->d_name.name ) __field(unsigned int, flags ) ), TP_fast_assign( __entry->dev = dir->i_sb->s_dev; __entry->nid = EROFS_I(dir)->nid; - __entry->name = dentry->d_name.name; + __assign_str(name, dentry->d_name.name); __entry->flags = flags; ), TP_printk("dev = (%d,%d), pnid = %llu, name:%s, flags:%x", show_dev_nid(__entry), - __entry->name, + __get_str(name), __entry->flags) ); -- cgit From d705117ddd724a9d4877e338e4587010ab6a1c62 Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Wed, 22 Sep 2021 17:51:41 +0800 Subject: erofs: fix misbehavior of unsupported chunk format check Unsupported chunk format should be checked with "if (vi->chunkformat & ~EROFS_CHUNK_FORMAT_ALL)" Found when checking with 4k-byte blockmap (although currently mkfs uses inode chunk indexes format by default.) Link: https://lore.kernel.org/r/20210922095141.233938-1-hsiangkao@linux.alibaba.com Fixes: c5aa903a59db ("erofs: support reading chunk-based uncompressed files") Reviewed-by: Liu Bo Reviewed-by: Chao Yu Signed-off-by: Gao Xiang --- fs/erofs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/erofs/inode.c b/fs/erofs/inode.c index 31ac3a73b390..a552399e211d 100644 --- a/fs/erofs/inode.c +++ b/fs/erofs/inode.c @@ -176,7 +176,7 @@ static struct page *erofs_read_inode(struct inode *inode, } if (vi->datalayout == EROFS_INODE_CHUNK_BASED) { - if (!(vi->chunkformat & EROFS_CHUNK_FORMAT_ALL)) { + if (vi->chunkformat & ~EROFS_CHUNK_FORMAT_ALL) { erofs_err(inode->i_sb, "unsupported chunk format %x of nid %llu", vi->chunkformat, vi->nid); -- cgit From c40dd3ca2a45d5bd6e8b3f4ace5cb81493096263 Mon Sep 17 00:00:00 2001 From: Yue Hu Date: Tue, 14 Sep 2021 11:59:15 +0800 Subject: erofs: clear compacted_2b if compacted_4b_initial > totalidx Currently, the whole indexes will only be compacted 4B if compacted_4b_initial > totalidx. So, the calculated compacted_2b is worthless for that case. It may waste CPU resources. No need to update compacted_4b_initial as mkfs since it's used to fulfill the alignment of the 1st compacted_2b pack and would handle the case above. We also need to clarify compacted_4b_end here. It's used for the last lclusters which aren't fitted in the previous compacted_2b packs. Some messages are from Xiang. Link: https://lore.kernel.org/r/20210914035915.1190-1-zbestahu@gmail.com Signed-off-by: Yue Hu Reviewed-by: Gao Xiang Reviewed-by: Chao Yu [ Gao Xiang: it's enough to use "compacted_4b_initial < totalidx". ] Signed-off-by: Gao Xiang --- fs/erofs/zmap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/erofs/zmap.c b/fs/erofs/zmap.c index 9fb98d85a3ce..7a6df35fdc91 100644 --- a/fs/erofs/zmap.c +++ b/fs/erofs/zmap.c @@ -369,7 +369,8 @@ static int compacted_load_cluster_from_disk(struct z_erofs_maprecorder *m, if (compacted_4b_initial == 32 / 4) compacted_4b_initial = 0; - if (vi->z_advise & Z_EROFS_ADVISE_COMPACTED_2B) + if ((vi->z_advise & Z_EROFS_ADVISE_COMPACTED_2B) && + compacted_4b_initial < totalidx) compacted_2b = rounddown(totalidx - compacted_4b_initial, 16); else compacted_2b = 0; -- cgit From a3727a8bac0a9e77c70820655fd8715523ba3db7 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Thu, 23 Sep 2021 09:50:11 -0400 Subject: selinux,smack: fix subjective/objective credential use mixups Jann Horn reported a problem with commit eb1231f73c4d ("selinux: clarify task subjective and objective credentials") where some LSM hooks were attempting to access the subjective credentials of a task other than the current task. Generally speaking, it is not safe to access another task's subjective credentials and doing so can cause a number of problems. Further, while looking into the problem, I realized that Smack was suffering from a similar problem brought about by a similar commit 1fb057dcde11 ("smack: differentiate between subjective and objective task credentials"). This patch addresses this problem by restoring the use of the task's objective credentials in those cases where the task is other than the current executing task. Not only does this resolve the problem reported by Jann, it is arguably the correct thing to do in these cases. Cc: stable@vger.kernel.org Fixes: eb1231f73c4d ("selinux: clarify task subjective and objective credentials") Fixes: 1fb057dcde11 ("smack: differentiate between subjective and objective task credentials") Reported-by: Jann Horn Acked-by: Eric W. Biederman Acked-by: Casey Schaufler Signed-off-by: Paul Moore --- security/selinux/hooks.c | 4 ++-- security/smack/smack_lsm.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 6517f221d52c..e7ebd45ca345 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2157,7 +2157,7 @@ static int selinux_ptrace_access_check(struct task_struct *child, static int selinux_ptrace_traceme(struct task_struct *parent) { return avc_has_perm(&selinux_state, - task_sid_subj(parent), task_sid_obj(current), + task_sid_obj(parent), task_sid_obj(current), SECCLASS_PROCESS, PROCESS__PTRACE, NULL); } @@ -6222,7 +6222,7 @@ static int selinux_msg_queue_msgrcv(struct kern_ipc_perm *msq, struct msg_msg *m struct ipc_security_struct *isec; struct msg_security_struct *msec; struct common_audit_data ad; - u32 sid = task_sid_subj(target); + u32 sid = task_sid_obj(target); int rc; isec = selinux_ipc(msq); diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index cacbe7518519..21a0e7c3b8de 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -2016,7 +2016,7 @@ static int smk_curacc_on_task(struct task_struct *p, int access, const char *caller) { struct smk_audit_info ad; - struct smack_known *skp = smk_of_task_struct_subj(p); + struct smack_known *skp = smk_of_task_struct_obj(p); int rc; smk_ad_init(&ad, caller, LSM_AUDIT_DATA_TASK); @@ -3480,7 +3480,7 @@ static void smack_d_instantiate(struct dentry *opt_dentry, struct inode *inode) */ static int smack_getprocattr(struct task_struct *p, char *name, char **value) { - struct smack_known *skp = smk_of_task_struct_subj(p); + struct smack_known *skp = smk_of_task_struct_obj(p); char *cp; int slen; -- cgit From 1f828223b7991a228bc2aef837b78737946d44b2 Mon Sep 17 00:00:00 2001 From: Shakeel Butt Date: Wed, 22 Sep 2021 15:49:06 -0700 Subject: memcg: flush lruvec stats in the refault MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Prior to the commit 7e1c0d6f5820 ("memcg: switch lruvec stats to rstat") and the commit aa48e47e3906 ("memcg: infrastructure to flush memcg stats"), each lruvec memcg stats can be off by (nr_cgroups * nr_cpus * 32) at worst and for unbounded amount of time. The commit aa48e47e3906 moved the lruvec stats to rstat infrastructure and the commit 7e1c0d6f5820 bounded the error for all the lruvec stats to (nr_cpus * 32) at worst for at most 2 seconds. More specifically it decoupled the number of stats and the number of cgroups from the error rate. However this reduction in error comes with the cost of triggering the slowpath of stats update more frequently. Previously in the slowpath the kernel adds the stats up the memcg tree. After aa48e47e3906, the kernel triggers the asyn lruvec stats flush through queue_work(). This causes regression reports from 0day kernel bot [1] as well as from phoronix test suite [2]. We tried two options to fix the regression: 1) Increase the threshold to trigger the slowpath in lruvec stats update codepath from 32 to 512. 2) Remove the slowpath from lruvec stats update codepath and instead flush the stats in the page refault codepath. The assumption is that the kernel timely flush the stats, so, the update tree would be small in the refault codepath to not cause the preformance impact. Following are the results of will-it-scale/page_fault[1|2|3] benchmark on four settings i.e. (1) 5.15-rc1 as baseline (2) 5.15-rc1 with aa48e47e3906 and 7e1c0d6f5820 reverted (3) 5.15-rc1 with option-1 (4) 5.15-rc1 with option-2. test (1) (2) (3) (4) pg_f1 368563 406277 (10.23%) 399693 (8.44%) 416398 (12.97%) pg_f2 338399 372133 (9.96%) 369180 (9.09%) 381024 (12.59%) pg_f3 500853 575399 (14.88%) 570388 (13.88%) 576083 (15.02%) From the above result, it seems like the option-2 not only solves the regression but also improves the performance for at least these benchmarks. Feng Tang (intel) ran the aim7 benchmark with these two options and confirms that option-1 reduces the regression but option-2 removes the regression. Michael Larabel (phoronix) ran multiple benchmarks with these options and reported the results at [3] and it shows for most benchmarks option-2 removes the regression introduced by the commit aa48e47e3906 ("memcg: infrastructure to flush memcg stats"). Based on the experiment results, this patch proposed the option-2 as the solution to resolve the regression. Link: https://lore.kernel.org/all/20210726022421.GB21872@xsang-OptiPlex-9020 [1] Link: https://www.phoronix.com/scan.php?page=article&item=linux515-compile-regress [2] Link: https://openbenchmarking.org/result/2109226-DEBU-LINUX5104 [3] Fixes: aa48e47e3906 ("memcg: infrastructure to flush memcg stats") Signed-off-by: Shakeel Butt Tested-by: Michael Larabel Cc: Johannes Weiner Cc: Roman Gushchin Cc: Feng Tang Cc: Michal Hocko Cc: Hillf Danton , Cc: Michal Koutný Cc: Andrew Morton , Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 10 ---------- mm/workingset.c | 1 + 2 files changed, 1 insertion(+), 10 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index b762215d73eb..6da5020a8656 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -106,9 +106,6 @@ static bool do_memsw_account(void) /* memcg and lruvec stats flushing */ static void flush_memcg_stats_dwork(struct work_struct *w); static DECLARE_DEFERRABLE_WORK(stats_flush_dwork, flush_memcg_stats_dwork); -static void flush_memcg_stats_work(struct work_struct *w); -static DECLARE_WORK(stats_flush_work, flush_memcg_stats_work); -static DEFINE_PER_CPU(unsigned int, stats_flush_threshold); static DEFINE_SPINLOCK(stats_flush_lock); #define THRESHOLDS_EVENTS_TARGET 128 @@ -682,8 +679,6 @@ void __mod_memcg_lruvec_state(struct lruvec *lruvec, enum node_stat_item idx, /* Update lruvec */ __this_cpu_add(pn->lruvec_stats_percpu->state[idx], val); - if (!(__this_cpu_inc_return(stats_flush_threshold) % MEMCG_CHARGE_BATCH)) - queue_work(system_unbound_wq, &stats_flush_work); } /** @@ -5361,11 +5356,6 @@ static void flush_memcg_stats_dwork(struct work_struct *w) queue_delayed_work(system_unbound_wq, &stats_flush_dwork, 2UL*HZ); } -static void flush_memcg_stats_work(struct work_struct *w) -{ - mem_cgroup_flush_stats(); -} - static void mem_cgroup_css_rstat_flush(struct cgroup_subsys_state *css, int cpu) { struct mem_cgroup *memcg = mem_cgroup_from_css(css); diff --git a/mm/workingset.c b/mm/workingset.c index d4268d8e9a82..d5b81e4f4cbe 100644 --- a/mm/workingset.c +++ b/mm/workingset.c @@ -352,6 +352,7 @@ void workingset_refault(struct page *page, void *shadow) inc_lruvec_state(lruvec, WORKINGSET_REFAULT_BASE + file); + mem_cgroup_flush_stats(); /* * Compare the distance to the existing workingset size. We * don't activate pages that couldn't stay resident even if -- cgit From 5501765a02a6c324f78581e6bb8209d054fe13ae Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:09:38 -0700 Subject: driver core: fw_devlink: Add support for FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD If a parent device is also a supplier to a child device, fw_devlink=on by design delays the probe() of the child device until the probe() of the parent finishes successfully. However, some drivers of such parent devices (where parent is also a supplier) expect the child device to finish probing successfully as soon as they are added using device_add() and before the probe() of the parent device has completed successfully. One example of such a case is discussed in the link mentioned below. Add a flag to make fw_devlink=on not enforce these supplier-consumer relationships, so these drivers can continue working. Link: https://lore.kernel.org/netdev/CAGETcx_uj0V4DChME-gy5HGKTYnxLBX=TH2rag29f_p=UcG+Tg@mail.gmail.com/ Fixes: ea718c699055 ("Revert "Revert "driver core: Set fw_devlink=on by default""") Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915170940.617415-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 19 +++++++++++++++++++ include/linux/fwnode.h | 11 ++++++++--- 2 files changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 316df6027093..21d4cb5d3767 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1722,6 +1722,25 @@ static int fw_devlink_create_devlink(struct device *con, struct device *sup_dev; int ret = 0; + /* + * In some cases, a device P might also be a supplier to its child node + * C. However, this would defer the probe of C until the probe of P + * completes successfully. This is perfectly fine in the device driver + * model. device_add() doesn't guarantee probe completion of the device + * by the time it returns. + * + * However, there are a few drivers that assume C will finish probing + * as soon as it's added and before P finishes probing. So, we provide + * a flag to let fw_devlink know not to delay the probe of C until the + * probe of P completes successfully. + * + * When such a flag is set, we can't create device links where P is the + * supplier of C as that would delay the probe of C. + */ + if (sup_handle->flags & FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD && + fwnode_is_ancestor_of(sup_handle, con->fwnode)) + return -EINVAL; + sup_dev = get_dev_from_fwnode(sup_handle); if (sup_dev) { /* diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h index 59828516ebaf..9f4ad719bfe3 100644 --- a/include/linux/fwnode.h +++ b/include/linux/fwnode.h @@ -22,10 +22,15 @@ struct device; * LINKS_ADDED: The fwnode has already be parsed to add fwnode links. * NOT_DEVICE: The fwnode will never be populated as a struct device. * INITIALIZED: The hardware corresponding to fwnode has been initialized. + * NEEDS_CHILD_BOUND_ON_ADD: For this fwnode/device to probe successfully, its + * driver needs its child devices to be bound with + * their respective drivers as soon as they are + * added. */ -#define FWNODE_FLAG_LINKS_ADDED BIT(0) -#define FWNODE_FLAG_NOT_DEVICE BIT(1) -#define FWNODE_FLAG_INITIALIZED BIT(2) +#define FWNODE_FLAG_LINKS_ADDED BIT(0) +#define FWNODE_FLAG_NOT_DEVICE BIT(1) +#define FWNODE_FLAG_INITIALIZED BIT(2) +#define FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD BIT(3) struct fwnode_handle { struct fwnode_handle *secondary; -- cgit From 04f41c68f18886aea5afc68be945e7195ea1d598 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:09:39 -0700 Subject: net: mdiobus: Set FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD for mdiobus parents There are many instances of PHYs that depend on a switch to supply a resource (Eg: interrupts). Switches also expects the PHYs to be probed by their specific drivers as soon as they are added. If that doesn't happen, then the switch would force the use of generic PHY drivers for the PHY even if the PHY might have specific driver available. fw_devlink=on by design can cause delayed probes of PHY. To avoid, this we need to set the FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD for the switch's fwnode before the PHYs are added. The most generic way to do this is to set this flag for the parent of MDIO busses which is typically the switch. For more context: https://lore.kernel.org/lkml/YTll0i6Rz3WAAYzs@lunn.ch/#t Fixes: ea718c699055 ("Revert "Revert "driver core: Set fw_devlink=on by default""") Suggested-by: Andrew Lunn Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915170940.617415-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/net/phy/mdio_bus.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 53f034fc2ef7..ee8313a4ac71 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -525,6 +525,10 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) NULL == bus->read || NULL == bus->write) return -EINVAL; + if (bus->parent && bus->parent->of_node) + bus->parent->of_node->fwnode.flags |= + FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD; + BUG_ON(bus->state != MDIOBUS_ALLOCATED && bus->state != MDIOBUS_UNREGISTERED); -- cgit From 12064c1768439fa0882547010afae6b52aafa7af Mon Sep 17 00:00:00 2001 From: Jia He Date: Thu, 23 Sep 2021 11:35:57 +0800 Subject: Revert "ACPI: Add memory semantics to acpi_os_map_memory()" This reverts commit 437b38c51162f8b87beb28a833c4d5dc85fa864e. The memory semantics added in commit 437b38c51162 causes SystemMemory Operation region, whose address range is not described in the EFI memory map to be mapped as NormalNC memory on arm64 platforms (through acpi_os_map_memory() in acpi_ex_system_memory_space_handler()). This triggers the following abort on an ARM64 Ampere eMAG machine, because presumably the physical address range area backing the Opregion does not support NormalNC memory attributes driven on the bus. Internal error: synchronous external abort: 96000410 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+ #462 Hardware name: MiTAC RAPTOR EV-883832-X3-0001/RAPTOR, BIOS 0.14 02/22/2019 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [...snip...] Call trace: acpi_ex_system_memory_space_handler+0x26c/0x2c8 acpi_ev_address_space_dispatch+0x228/0x2c4 acpi_ex_access_region+0x114/0x268 acpi_ex_field_datum_io+0x128/0x1b8 acpi_ex_extract_from_field+0x14c/0x2ac acpi_ex_read_data_from_field+0x190/0x1b8 acpi_ex_resolve_node_to_value+0x1ec/0x288 acpi_ex_resolve_to_value+0x250/0x274 acpi_ds_evaluate_name_path+0xac/0x124 acpi_ds_exec_end_op+0x90/0x410 acpi_ps_parse_loop+0x4ac/0x5d8 acpi_ps_parse_aml+0xe0/0x2c8 acpi_ps_execute_method+0x19c/0x1ac acpi_ns_evaluate+0x1f8/0x26c acpi_ns_init_one_device+0x104/0x140 acpi_ns_walk_namespace+0x158/0x1d0 acpi_ns_initialize_devices+0x194/0x218 acpi_initialize_objects+0x48/0x50 acpi_init+0xe0/0x498 If the Opregion address range is not present in the EFI memory map there is no way for us to determine the memory attributes to use to map it - defaulting to NormalNC does not work (and it is not correct on a memory region that may have read side-effects) and therefore commit 437b38c51162 should be reverted, which means reverting back to the original behavior whereby address ranges that are mapped using acpi_os_map_memory() default to the safe devicenGnRnE attributes on ARM64 if the mapped address range is not defined in the EFI memory map. Fixes: 437b38c51162 ("ACPI: Add memory semantics to acpi_os_map_memory()") Signed-off-by: Jia He Acked-by: Lorenzo Pieralisi Acked-by: Catalin Marinas Signed-off-by: Rafael J. Wysocki --- arch/arm64/include/asm/acpi.h | 3 --- arch/arm64/kernel/acpi.c | 19 +++---------------- drivers/acpi/osl.c | 23 +++++++---------------- include/acpi/acpi_io.h | 8 -------- 4 files changed, 10 insertions(+), 43 deletions(-) diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index 7535dc7cc5aa..bd68e1b7f29f 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -50,9 +50,6 @@ pgprot_t __acpi_get_mem_attribute(phys_addr_t addr); void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size); #define acpi_os_ioremap acpi_os_ioremap -void __iomem *acpi_os_memmap(acpi_physical_address phys, acpi_size size); -#define acpi_os_memmap acpi_os_memmap - typedef u64 phys_cpuid_t; #define PHYS_CPUID_INVALID INVALID_HWID diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index 1c9c2f7a1c04..f3851724fe35 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -273,8 +273,7 @@ pgprot_t __acpi_get_mem_attribute(phys_addr_t addr) return __pgprot(PROT_DEVICE_nGnRnE); } -static void __iomem *__acpi_os_ioremap(acpi_physical_address phys, - acpi_size size, bool memory) +void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size) { efi_memory_desc_t *md, *region = NULL; pgprot_t prot; @@ -300,11 +299,9 @@ static void __iomem *__acpi_os_ioremap(acpi_physical_address phys, * It is fine for AML to remap regions that are not represented in the * EFI memory map at all, as it only describes normal memory, and MMIO * regions that require a virtual mapping to make them accessible to - * the EFI runtime services. Determine the region default - * attributes by checking the requested memory semantics. + * the EFI runtime services. */ - prot = memory ? __pgprot(PROT_NORMAL_NC) : - __pgprot(PROT_DEVICE_nGnRnE); + prot = __pgprot(PROT_DEVICE_nGnRnE); if (region) { switch (region->type) { case EFI_LOADER_CODE: @@ -364,16 +361,6 @@ static void __iomem *__acpi_os_ioremap(acpi_physical_address phys, return __ioremap(phys, size, prot); } -void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size) -{ - return __acpi_os_ioremap(phys, size, false); -} - -void __iomem *acpi_os_memmap(acpi_physical_address phys, acpi_size size) -{ - return __acpi_os_ioremap(phys, size, true); -} - /* * Claim Synchronous External Aborts as a firmware first notification. * diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index a43f1521efe6..45c5c0e45e33 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -284,8 +284,7 @@ acpi_map_lookup_virt(void __iomem *virt, acpi_size size) #define should_use_kmap(pfn) page_is_ram(pfn) #endif -static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz, - bool memory) +static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz) { unsigned long pfn; @@ -295,8 +294,7 @@ static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz, return NULL; return (void __iomem __force *)kmap(pfn_to_page(pfn)); } else - return memory ? acpi_os_memmap(pg_off, pg_sz) : - acpi_os_ioremap(pg_off, pg_sz); + return acpi_os_ioremap(pg_off, pg_sz); } static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) @@ -311,10 +309,9 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) } /** - * __acpi_os_map_iomem - Get a virtual address for a given physical address range. + * acpi_os_map_iomem - Get a virtual address for a given physical address range. * @phys: Start of the physical address range to map. * @size: Size of the physical address range to map. - * @memory: true if remapping memory, false if IO * * Look up the given physical address range in the list of existing ACPI memory * mappings. If found, get a reference to it and return a pointer to it (its @@ -324,8 +321,8 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) * During early init (when acpi_permanent_mmap has not been set yet) this * routine simply calls __acpi_map_table() to get the job done. */ -static void __iomem __ref -*__acpi_os_map_iomem(acpi_physical_address phys, acpi_size size, bool memory) +void __iomem __ref +*acpi_os_map_iomem(acpi_physical_address phys, acpi_size size) { struct acpi_ioremap *map; void __iomem *virt; @@ -356,7 +353,7 @@ static void __iomem __ref pg_off = round_down(phys, PAGE_SIZE); pg_sz = round_up(phys + size, PAGE_SIZE) - pg_off; - virt = acpi_map(phys, size, memory); + virt = acpi_map(phys, size); if (!virt) { mutex_unlock(&acpi_ioremap_lock); kfree(map); @@ -375,17 +372,11 @@ out: mutex_unlock(&acpi_ioremap_lock); return map->virt + (phys - map->phys); } - -void __iomem *__ref -acpi_os_map_iomem(acpi_physical_address phys, acpi_size size) -{ - return __acpi_os_map_iomem(phys, size, false); -} EXPORT_SYMBOL_GPL(acpi_os_map_iomem); void *__ref acpi_os_map_memory(acpi_physical_address phys, acpi_size size) { - return (void *)__acpi_os_map_iomem(phys, size, true); + return (void *)acpi_os_map_iomem(phys, size); } EXPORT_SYMBOL_GPL(acpi_os_map_memory); diff --git a/include/acpi/acpi_io.h b/include/acpi/acpi_io.h index a0212e67d6f4..027faa8883aa 100644 --- a/include/acpi/acpi_io.h +++ b/include/acpi/acpi_io.h @@ -14,14 +14,6 @@ static inline void __iomem *acpi_os_ioremap(acpi_physical_address phys, } #endif -#ifndef acpi_os_memmap -static inline void __iomem *acpi_os_memmap(acpi_physical_address phys, - acpi_size size) -{ - return ioremap_cache(phys, size); -} -#endif - extern bool acpi_permanent_mmap; void __iomem __ref -- cgit From 03ab9cb982b622239cc2542ce7617b98a9ea159e Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 20 Sep 2021 13:14:15 +0100 Subject: cifs: Deal with some warnings from W=1 Deal with some warnings generated from make W=1: (1) Add/remove/fix kerneldoc parameters descriptions. (2) Turn cifs' rqst_page_get_length()'s banner comment into a kerneldoc comment. It should probably be prefixed with "cifs_" though. Signed-off-by: David Howells Signed-off-by: Steve French --- fs/cifs/misc.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 03da00eb7c04..f2916b51652a 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -590,6 +590,7 @@ void cifs_put_writer(struct cifsInodeInfo *cinode) /** * cifs_queue_oplock_break - queue the oplock break handler for cfile + * @cfile: The file to break the oplock on * * This function is called from the demultiplex thread when it * receives an oplock break for @cfile. @@ -1065,6 +1066,9 @@ setup_aio_ctx_iter(struct cifs_aio_ctx *ctx, struct iov_iter *iter, int rw) /** * cifs_alloc_hash - allocate hash and hash context together + * @name: The name of the crypto hash algo + * @shash: Where to put the pointer to the hash algo + * @sdesc: Where to put the pointer to the hash descriptor * * The caller has to make sure @sdesc is initialized to either NULL or * a valid context. Both can be freed via cifs_free_hash(). @@ -1103,6 +1107,8 @@ cifs_alloc_hash(const char *name, /** * cifs_free_hash - free hash and hash context together + * @shash: Where to find the pointer to the hash algo + * @sdesc: Where to find the pointer to the hash descriptor * * Freeing a NULL hash or context is safe. */ @@ -1118,8 +1124,10 @@ cifs_free_hash(struct crypto_shash **shash, struct sdesc **sdesc) /** * rqst_page_get_length - obtain the length and offset for a page in smb_rqst - * Input: rqst - a smb_rqst, page - a page index for rqst - * Output: *len - the length for this page, *offset - the offset for this page + * @rqst: The request descriptor + * @page: The index of the page to query + * @len: Where to store the length for this page: + * @offset: Where to store the offset for this page */ void rqst_page_get_length(struct smb_rqst *rqst, unsigned int page, unsigned int *len, unsigned int *offset) @@ -1152,6 +1160,8 @@ void extract_unc_hostname(const char *unc, const char **h, size_t *len) /** * copy_path_name - copy src path to dst, possibly truncating + * @dst: The destination buffer + * @src: The source name * * returns number of bytes written (including trailing nul) */ -- cgit From c48977f020d5846215e2ff7e8172e7b46b3d64b4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Sep 2021 14:16:00 +0200 Subject: drm/amd/display: fix empty debug macros Using an empty macro expansion as a conditional expression produces a W=1 warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries': drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER"); | ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK"); | ^ Expand it to "do { } while (0)" instead to make the expression more robust and avoid the warning. Fixes: 56aca2309301 ("drm/amd/display: Add AUX I2C tracing.") Signed-off-by: Arnd Bergmann Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce/dce_aux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c b/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c index e14f99b4b0c3..3c3347341103 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_aux.c @@ -42,7 +42,7 @@ #define DC_LOGGER \ engine->ctx->logger -#define DC_TRACE_LEVEL_MESSAGE(...) /* do nothing */ +#define DC_TRACE_LEVEL_MESSAGE(...) do { } while (0) #define IS_DC_I2CAUX_LOGGING_ENABLED() (false) #define LOG_FLAG_Error_I2cAux LOG_ERROR #define LOG_FLAG_I2cAux_DceAux LOG_I2C_AUX @@ -76,7 +76,7 @@ enum { #define DEFAULT_AUX_ENGINE_MULT 0 #define DEFAULT_AUX_ENGINE_LENGTH 69 -#define DC_TRACE_LEVEL_MESSAGE(...) /* do nothing */ +#define DC_TRACE_LEVEL_MESSAGE(...) do { } while (0) static void release_engine( struct dce_aux *engine) -- cgit From 6de0653f7719bd0aa61f683fba16ae0e2c4ead64 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 17 Sep 2021 12:05:30 -0400 Subject: MAINTAINERS: fix up entry for AMD Powerplay Fix the path to cover both the older powerplay infrastructure and the newer SwSMU infrastructure. Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ca6d6fde85cf..556957c5aa5c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -977,12 +977,12 @@ L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/amd-pmc.* -AMD POWERPLAY +AMD POWERPLAY AND SWSMU M: Evan Quan L: amd-gfx@lists.freedesktop.org S: Supported T: git https://gitlab.freedesktop.org/agd5f/linux.git -F: drivers/gpu/drm/amd/pm/powerplay/ +F: drivers/gpu/drm/amd/pm/ AMD PTDMA DRIVER M: Sanjay R Mehta -- cgit From 7beb26dcedaa977ece5be7c712a66b7b6c66fc2b Mon Sep 17 00:00:00 2001 From: Philip Yang Date: Mon, 13 Sep 2021 10:03:36 -0400 Subject: drm/amdkfd: SVM map to gpus check vma boundary SVM range may includes multiple VMAs with different vm_flags, if prange page index is the last page of the VMA offset + npages, update GPU mapping to create GPU page table with same VMA access permission. Signed-off-by: Philip Yang Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c index 9fc8021bb0ab..432d5aae0962 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c @@ -1178,7 +1178,11 @@ svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm, for (i = offset; i < offset + npages; i++) { last_domain = dma_addr[i] & SVM_RANGE_VRAM_DOMAIN; dma_addr[i] &= ~SVM_RANGE_VRAM_DOMAIN; - if ((prange->start + i) < prange->last && + + /* Collect all pages in the same address range and memory domain + * that can be mapped with a single call to update mapping. + */ + if (i < offset + npages - 1 && last_domain == (dma_addr[i + 1] & SVM_RANGE_VRAM_DOMAIN)) continue; -- cgit From f63251184a81039ebc805306505838c2a073e51a Mon Sep 17 00:00:00 2001 From: Philip Yang Date: Tue, 14 Sep 2021 16:33:40 -0400 Subject: drm/amdkfd: fix dma mapping leaking warning For xnack off, restore work dma unmap previous system memory page, and dma map the updated system memory page to update GPU mapping, this is not dma mapping leaking, remove the WARN_ONCE for dma mapping leaking. prange->dma_addr store the VRAM page pfn after the range migrated to VRAM, should not dma unmap VRAM page when updating GPU mapping or remove prange. Add helper svm_is_valid_dma_mapping_addr to check VRAM page and error cases. Mask out SVM_RANGE_VRAM_DOMAIN flag in dma_addr before calling amdgpu vm update to avoid BUG_ON(*addr & 0xFFFF00000000003FULL), and set it again immediately after. This flag is used to know the type of page later to dma unmapping system memory page. Fixes: 1d5dbfe6c06a ("drm/amdkfd: classify and map mixed svm range pages in GPU") Signed-off-by: Philip Yang Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c index 432d5aae0962..9d0f65a90002 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c @@ -118,6 +118,13 @@ static void svm_range_remove_notifier(struct svm_range *prange) mmu_interval_notifier_remove(&prange->notifier); } +static bool +svm_is_valid_dma_mapping_addr(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr && !dma_mapping_error(dev, dma_addr) && + !(dma_addr & SVM_RANGE_VRAM_DOMAIN); +} + static int svm_range_dma_map_dev(struct amdgpu_device *adev, struct svm_range *prange, unsigned long offset, unsigned long npages, @@ -139,8 +146,7 @@ svm_range_dma_map_dev(struct amdgpu_device *adev, struct svm_range *prange, addr += offset; for (i = 0; i < npages; i++) { - if (WARN_ONCE(addr[i] && !dma_mapping_error(dev, addr[i]), - "leaking dma mapping\n")) + if (svm_is_valid_dma_mapping_addr(dev, addr[i])) dma_unmap_page(dev, addr[i], PAGE_SIZE, dir); page = hmm_pfn_to_page(hmm_pfns[i]); @@ -209,7 +215,7 @@ void svm_range_dma_unmap(struct device *dev, dma_addr_t *dma_addr, return; for (i = offset; i < offset + npages; i++) { - if (!dma_addr[i] || dma_mapping_error(dev, dma_addr[i])) + if (!svm_is_valid_dma_mapping_addr(dev, dma_addr[i])) continue; pr_debug("dma unmapping 0x%llx\n", dma_addr[i] >> PAGE_SHIFT); dma_unmap_page(dev, dma_addr[i], PAGE_SIZE, dir); @@ -1165,7 +1171,7 @@ svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm, unsigned long last_start; int last_domain; int r = 0; - int64_t i; + int64_t i, j; last_start = prange->start + offset; @@ -1205,6 +1211,10 @@ svm_range_map_to_gpu(struct amdgpu_device *adev, struct amdgpu_vm *vm, NULL, dma_addr, &vm->last_update, &table_freed); + + for (j = last_start - prange->start; j <= i; j++) + dma_addr[j] |= last_domain; + if (r) { pr_debug("failed %d to map to gpu 0x%lx\n", r, prange->start); goto out; -- cgit From 305d568b72f17f674155a2a8275f865f207b3808 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Thu, 16 Sep 2021 15:34:46 -0300 Subject: RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests The FSM can run in a circle allowing rdma_resolve_ip() to be called twice on the same id_priv. While this cannot happen without going through the work, it violates the invariant that the same address resolution background request cannot be active twice. CPU 1 CPU 2 rdma_resolve_addr(): RDMA_CM_IDLE -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) #1 process_one_req(): for #1 addr_handler(): RDMA_CM_ADDR_QUERY -> RDMA_CM_ADDR_BOUND mutex_unlock(&id_priv->handler_mutex); [.. handler still running ..] rdma_resolve_addr(): RDMA_CM_ADDR_BOUND -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) !! two requests are now on the req_list rdma_destroy_id(): destroy_id_handler_unlock(): _destroy_id(): cma_cancel_operation(): rdma_addr_cancel() // process_one_req() self removes it spin_lock_bh(&lock); cancel_delayed_work(&req->work); if (!list_empty(&req->list)) == true ! rdma_addr_cancel() returns after process_on_req #1 is done kfree(id_priv) process_one_req(): for #2 addr_handler(): mutex_lock(&id_priv->handler_mutex); !! Use after free on id_priv rdma_addr_cancel() expects there to be one req on the list and only cancels the first one. The self-removal behavior of the work only happens after the handler has returned. This yields a situations where the req_list can have two reqs for the same "handle" but rdma_addr_cancel() only cancels the first one. The second req remains active beyond rdma_destroy_id() and will use-after-free id_priv once it inevitably triggers. Fix this by remembering if the id_priv has called rdma_resolve_ip() and always cancel before calling it again. This ensures the req_list never gets more than one item in it and doesn't cost anything in the normal flow that never uses this strange error path. Link: https://lore.kernel.org/r/0-v1-3bc675b8006d+22-syz_cancel_uaf_jgg@nvidia.com Cc: stable@vger.kernel.org Fixes: e51060f08a61 ("IB: IP address based RDMA connection manager") Reported-by: syzbot+dc3dfba010d7671e05f5@syzkaller.appspotmail.com Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cma.c | 23 +++++++++++++++++++++++ drivers/infiniband/core/cma_priv.h | 1 + 2 files changed, 24 insertions(+) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 8862b0e572f0..704ce595542c 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1783,6 +1783,14 @@ static void cma_cancel_operation(struct rdma_id_private *id_priv, { switch (state) { case RDMA_CM_ADDR_QUERY: + /* + * We can avoid doing the rdma_addr_cancel() based on state, + * only RDMA_CM_ADDR_QUERY has a work that could still execute. + * Notice that the addr_handler work could still be exiting + * outside this state, however due to the interaction with the + * handler_mutex the work is guaranteed not to touch id_priv + * during exit. + */ rdma_addr_cancel(&id_priv->id.route.addr.dev_addr); break; case RDMA_CM_ROUTE_QUERY: @@ -3425,6 +3433,21 @@ int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr, if (dst_addr->sa_family == AF_IB) { ret = cma_resolve_ib_addr(id_priv); } else { + /* + * The FSM can return back to RDMA_CM_ADDR_BOUND after + * rdma_resolve_ip() is called, eg through the error + * path in addr_handler(). If this happens the existing + * request must be canceled before issuing a new one. + * Since canceling a request is a bit slow and this + * oddball path is rare, keep track once a request has + * been issued. The track turns out to be a permanent + * state since this is the only cancel as it is + * immediately before rdma_resolve_ip(). + */ + if (id_priv->used_resolve_ip) + rdma_addr_cancel(&id->route.addr.dev_addr); + else + id_priv->used_resolve_ip = 1; ret = rdma_resolve_ip(cma_src_addr(id_priv), dst_addr, &id->route.addr.dev_addr, timeout_ms, addr_handler, diff --git a/drivers/infiniband/core/cma_priv.h b/drivers/infiniband/core/cma_priv.h index 5c463da99845..f92f101ea981 100644 --- a/drivers/infiniband/core/cma_priv.h +++ b/drivers/infiniband/core/cma_priv.h @@ -91,6 +91,7 @@ struct rdma_id_private { u8 afonly; u8 timeout; u8 min_rnr_timer; + u8 used_resolve_ip; enum ib_gid_type gid_type; /* -- cgit From 8bd8d1dff9eb90255c030d2e52a4f65a7fef33a9 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 2 Sep 2021 22:26:31 +0100 Subject: vfio/pci: add missing identifier name in argument of function prototype The function prototype is missing an identifier name. Add one. Signed-off-by: Colin Ian King Reviewed-by: Jason Gunthorpe Link: https://lore.kernel.org/r/20210902212631.54260-1-colin.king@canonical.com Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c index 68198e0f2a63..a03b5a99c2da 100644 --- a/drivers/vfio/pci/vfio_pci_core.c +++ b/drivers/vfio/pci/vfio_pci_core.c @@ -565,7 +565,7 @@ static bool vfio_pci_dev_below_slot(struct pci_dev *pdev, struct pci_slot *slot) } struct vfio_pci_walk_info { - int (*fn)(struct pci_dev *, void *data); + int (*fn)(struct pci_dev *pdev, void *data); void *data; struct pci_dev *pdev; bool slot; -- cgit From ab39d3cef526ba09c4c6923b4cd7e6ec1c5d4faa Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Thu, 23 Sep 2021 11:58:43 +0800 Subject: drm/amd/pm: Update intermediate power state for SI Update the current state as boot state during dpm initialization. During the subsequent initialization, set_power_state gets called to transition to the final power state. set_power_state refers to values from the current state and without current state populated, it could result in NULL pointer dereference. For ex: on platforms where PCI speed change is supported through ACPI ATCS method, the link speed of current state needs to be queried before deciding on changing to final power state's link speed. The logic to query ATCS-support was broken on certain platforms. The issue became visible when broken ATCS-support logic got fixed with commit f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)"). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698 Signed-off-by: Lijo Lazar Reviewed-by: Hawking Zhang Acked-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/pm/powerplay/si_dpm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c b/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c index bdbbeb959c68..81f82aa05ec2 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c +++ b/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c @@ -6867,6 +6867,8 @@ static int si_dpm_enable(struct amdgpu_device *adev) si_enable_auto_throttle_source(adev, AMDGPU_DPM_AUTO_THROTTLE_SRC_THERMAL, true); si_thermal_start_thermal_controller(adev); + ni_update_current_ps(adev, boot_ps); + return 0; } -- cgit From 7d6687200a939176847090bbde5cb79a82792a2f Mon Sep 17 00:00:00 2001 From: Philip Yang Date: Fri, 17 Sep 2021 14:32:14 -0400 Subject: drm/amdkfd: handle svm migrate init error If svm migration init failed to create pgmap for device memory, set pgmap type to 0 to disable device SVM support capability. Signed-off-by: Philip Yang Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c index dab290a4d19d..165e0ebb619d 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c @@ -894,6 +894,9 @@ int svm_migrate_init(struct amdgpu_device *adev) r = devm_memremap_pages(adev->dev, pgmap); if (IS_ERR(r)) { pr_err("failed to register HMM device memory\n"); + + /* Disable SVM support capability */ + pgmap->type = 0; devm_release_mem_region(adev->dev, res->start, res->end - res->start + 1); return PTR_ERR(r); -- cgit From 197ae17722e989942b36e33e044787877f158574 Mon Sep 17 00:00:00 2001 From: Philip Yang Date: Mon, 20 Sep 2021 17:25:52 -0400 Subject: drm/amdkfd: fix svm_migrate_fini warning Device manager releases device-specific resources when a driver disconnects from a device, devm_memunmap_pages and devm_release_mem_region calls in svm_migrate_fini are redundant. It causes below warning trace after patch "drm/amdgpu: Split amdgpu_device_fini into early and late", so remove function svm_migrate_fini. BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718 WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795 devm_release_action+0x51/0x60 Call Trace: ? memunmap_pages+0x360/0x360 svm_migrate_fini+0x2d/0x60 [amdgpu] kgd2kfd_device_exit+0x23/0xa0 [amdgpu] amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu] amdgpu_device_fini_sw+0x45/0x290 [amdgpu] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] drm_dev_release+0x20/0x40 [drm] release_nodes+0x196/0x1e0 device_release_driver_internal+0x104/0x1d0 driver_detach+0x47/0x90 bus_remove_driver+0x7a/0xd0 pci_unregister_driver+0x3d/0x90 amdgpu_exit+0x11/0x20 [amdgpu] Signed-off-by: Philip Yang Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_device.c | 1 - drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 13 ++++--------- drivers/gpu/drm/amd/amdkfd/kfd_migrate.h | 5 ----- 3 files changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c index 98d1b3ab3a46..c2a4d920da40 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c @@ -971,7 +971,6 @@ out: void kgd2kfd_device_exit(struct kfd_dev *kfd) { if (kfd->init_complete) { - svm_migrate_fini((struct amdgpu_device *)kfd->kgd); device_queue_manager_uninit(kfd->dqm); kfd_interrupt_exit(kfd); kfd_topology_remove_device(kfd); diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c index 165e0ebb619d..4a16e3c257b9 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c @@ -891,6 +891,10 @@ int svm_migrate_init(struct amdgpu_device *adev) pgmap->ops = &svm_migrate_pgmap_ops; pgmap->owner = SVM_ADEV_PGMAP_OWNER(adev); pgmap->flags = MIGRATE_VMA_SELECT_DEVICE_PRIVATE; + + /* Device manager releases device-specific resources, memory region and + * pgmap when driver disconnects from device. + */ r = devm_memremap_pages(adev->dev, pgmap); if (IS_ERR(r)) { pr_err("failed to register HMM device memory\n"); @@ -911,12 +915,3 @@ int svm_migrate_init(struct amdgpu_device *adev) return 0; } - -void svm_migrate_fini(struct amdgpu_device *adev) -{ - struct dev_pagemap *pgmap = &adev->kfd.dev->pgmap; - - devm_memunmap_pages(adev->dev, pgmap); - devm_release_mem_region(adev->dev, pgmap->range.start, - pgmap->range.end - pgmap->range.start + 1); -} diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h index 0de76b5d4973..2f5b3394c9ed 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h @@ -47,7 +47,6 @@ unsigned long svm_migrate_addr_to_pfn(struct amdgpu_device *adev, unsigned long addr); int svm_migrate_init(struct amdgpu_device *adev); -void svm_migrate_fini(struct amdgpu_device *adev); #else @@ -55,10 +54,6 @@ static inline int svm_migrate_init(struct amdgpu_device *adev) { return 0; } -static inline void svm_migrate_fini(struct amdgpu_device *adev) -{ - /* empty */ -} #endif /* IS_ENABLED(CONFIG_HSA_AMD_SVM) */ -- cgit From 28406a21999152ff7faa30b194f734565bdd8e0d Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 23 Sep 2021 15:01:27 +0530 Subject: pinctrl: qcom: sc7280: Add PM suspend callbacks Use PM suspend callbacks from msm core, without this the hog_sleep pins don't change state in suspend. Signed-off-by: Rajendra Nayak Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/1632389487-11283-1-git-send-email-rnayak@codeaurora.org Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-sc7280.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280.c b/drivers/pinctrl/qcom/pinctrl-sc7280.c index afddf6d60dbe..9017ede409c9 100644 --- a/drivers/pinctrl/qcom/pinctrl-sc7280.c +++ b/drivers/pinctrl/qcom/pinctrl-sc7280.c @@ -1496,6 +1496,7 @@ static const struct of_device_id sc7280_pinctrl_of_match[] = { static struct platform_driver sc7280_pinctrl_driver = { .driver = { .name = "sc7280-pinctrl", + .pm = &msm_pinctrl_dev_pm_ops, .of_match_table = sc7280_pinctrl_of_match, }, .probe = sc7280_pinctrl_probe, -- cgit From 4f22262280ccb5c0a18a42029313938aabfaff12 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 23 Sep 2021 12:42:35 -0500 Subject: cifs: Clear modified attribute bit from inode flags Clear CIFS_INO_MODIFIED_ATTR bit from inode flags after updating mtime and ctime Signed-off-by: Rohith Surabattula Reviewed-by: Paulo Alcantara (SUSE) Acked-by: Ronnie Sahlberg Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Steve French --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 0ab5bb24b8ca..13f3182cf796 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -884,7 +884,7 @@ int cifs_close(struct inode *inode, struct file *file) cinode->lease_granted && !test_bit(CIFS_INO_CLOSE_ON_LOCK, &cinode->flags) && dclose) { - if (test_bit(CIFS_INO_MODIFIED_ATTR, &cinode->flags)) { + if (test_and_clear_bit(CIFS_INO_MODIFIED_ATTR, &cinode->flags)) { inode->i_ctime = inode->i_mtime = current_time(inode); cifs_fscache_update_inode_cookie(inode); } -- cgit From b06d893ef2492245d0319b4136edb4c346b687a3 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 23 Sep 2021 16:00:31 -0500 Subject: smb3: correct smb3 ACL security descriptor Address warning: fs/smbfs_client/smb2pdu.c:2425 create_sd_buf() warn: struct type mismatch 'smb3_acl vs cifs_acl' Pointed out by Dan Carpenter via smatch code analysis tool Reported-by: Dan Carpenter Acked-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/smb2pdu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 672ae78e866a..7829c590eeac 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2397,7 +2397,7 @@ create_sd_buf(umode_t mode, bool set_owner, unsigned int *len) buf->sd.OffsetDacl = cpu_to_le32(ptr - (__u8 *)&buf->sd); /* Ship the ACL for now. we will copy it into buf later. */ aclptr = ptr; - ptr += sizeof(struct cifs_acl); + ptr += sizeof(struct smb3_acl); /* create one ACE to hold the mode embedded in reserved special SID */ acelen = setup_special_mode_ACE((struct cifs_ace *)ptr, (__u64)mode); @@ -2422,7 +2422,7 @@ create_sd_buf(umode_t mode, bool set_owner, unsigned int *len) acl.AclRevision = ACL_REVISION; /* See 2.4.4.1 of MS-DTYP */ acl.AclSize = cpu_to_le16(acl_size); acl.AceCount = cpu_to_le16(ace_count); - memcpy(aclptr, &acl, sizeof(struct cifs_acl)); + memcpy(aclptr, &acl, sizeof(struct smb3_acl)); buf->ccontext.DataLength = cpu_to_le32(ptr - (__u8 *)&buf->sd); *len = roundup(ptr - (__u8 *)buf, 8); -- cgit From 1db1aa98871defd9316d13f59708f2277c4f9232 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 23 Sep 2021 18:52:40 -0500 Subject: smb3: correct server pointer dereferencing check to be more consistent Address warning: fs/smbfs_client/misc.c:273 header_assemble() warn: variable dereferenced before check 'treeCon->ses->server' Pointed out by Dan Carpenter via smatch code analysis tool Although the check is likely unneeded, adding it makes the code more consistent and easier to read, as the same check is done elsewhere in the function. Reported-by: Dan Carpenter Acked-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/misc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index f2916b51652a..bb1185fff8cc 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -264,7 +264,8 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , /* Uid is not converted */ buffer->Uid = treeCon->ses->Suid; - buffer->Mid = get_next_mid(treeCon->ses->server); + if (treeCon->ses->server) + buffer->Mid = get_next_mid(treeCon->ses->server); } if (treeCon->Flags & SMB_SHARE_IS_IN_DFS) buffer->Flags2 |= SMBFLG2_DFS; -- cgit From 9ed38fd4a15417cac83967360cf20b853bfab9b6 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 23 Sep 2021 19:18:37 -0500 Subject: cifs: fix incorrect check for null pointer in header_assemble Although very unlikely that the tlink pointer would be null in this case, get_next_mid function can in theory return null (but not an error) so need to check for null (not for IS_ERR, which can not be returned here). Address warning: fs/smbfs_client/connect.c:2392 cifs_match_super() warn: 'tlink' isn't an ERR_PTR Pointed out by Dan Carpenter via smatch code analysis tool CC: stable@vger.kernel.org Reported-by: Dan Carpenter Acked-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/connect.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 7881115cfbee..c3b94c1e4591 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2389,9 +2389,10 @@ cifs_match_super(struct super_block *sb, void *data) spin_lock(&cifs_tcp_ses_lock); cifs_sb = CIFS_SB(sb); tlink = cifs_get_tlink(cifs_sb_master_tlink(cifs_sb)); - if (IS_ERR(tlink)) { + if (tlink == NULL) { + /* can not match superblock if tlink were ever null */ spin_unlock(&cifs_tcp_ses_lock); - return rc; + return 0; } tcon = tlink_tcon(tlink); ses = tcon->ses; -- cgit From 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c Mon Sep 17 00:00:00 2001 From: Uwe Brandt Date: Tue, 21 Sep 2021 19:54:46 +0200 Subject: USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter. Signed-off-by: Uwe Brandt Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index fd51498ab108..189279869a8b 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -233,6 +233,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */ + { USB_DEVICE(0x2184, 0x0030) }, /* GW Instek GDM-834x Digital Multimeter */ { USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ -- cgit From 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a Mon Sep 17 00:00:00 2001 From: Slark Xiao Date: Fri, 17 Sep 2021 19:01:06 +0800 Subject: USB: serial: option: add device id for Foxconn T99W265 Adding support for Foxconn device T99W265 for enumeration with PID 0xe0db. usb-devices output for 0xe0db T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0489 ProdID=e0db Rev=05.04 S: Manufacturer=Microsoft S: Product=Generic Mobile Broadband Adapter S: SerialNumber=6c50f452 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem Signed-off-by: Slark Xiao Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com [ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 02a35f26ee82..6cfb5d33609f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2075,6 +2075,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(0x0489, 0xe0b5), /* Foxconn T77W968 ESIM */ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff), /* Foxconn T99W265 MBIM */ + .driver_info = RSVD(3) }, { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */ -- cgit From 505d9dcb0f7ddf9d075e729523a33d38642ae680 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 26 Aug 2021 16:04:27 +0300 Subject: crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are three bugs in this code: 1) If we ccp_init_data() fails for &src then we need to free aad. Use goto e_aad instead of goto e_ctx. 2) The label to free the &final_wa was named incorrectly as "e_tag" but it should have been "e_final_wa". One error path leaked &final_wa. 3) The &tag was leaked on one error path. In that case, I added a free before the goto because the resource was local to that block. Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Reported-by: "minihanshen(沈明航)" Signed-off-by: Dan Carpenter Reviewed-by: John Allen Tested-by: John Allen Signed-off-by: Herbert Xu --- drivers/crypto/ccp/ccp-ops.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/crypto/ccp/ccp-ops.c b/drivers/crypto/ccp/ccp-ops.c index bb88198c874e..aa4e1a500691 100644 --- a/drivers/crypto/ccp/ccp-ops.c +++ b/drivers/crypto/ccp/ccp-ops.c @@ -778,7 +778,7 @@ ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); if (ret) - goto e_ctx; + goto e_aad; if (in_place) { dst = src; @@ -863,7 +863,7 @@ ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) op.u.aes.size = 0; ret = cmd_q->ccp->vdata->perform->aes(&op); if (ret) - goto e_dst; + goto e_final_wa; if (aes->action == CCP_AES_ACTION_ENCRYPT) { /* Put the ciphered tag after the ciphertext. */ @@ -873,17 +873,19 @@ ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) ret = ccp_init_dm_workarea(&tag, cmd_q, authsize, DMA_BIDIRECTIONAL); if (ret) - goto e_tag; + goto e_final_wa; ret = ccp_set_dm_area(&tag, 0, p_tag, 0, authsize); - if (ret) - goto e_tag; + if (ret) { + ccp_dm_free(&tag); + goto e_final_wa; + } ret = crypto_memneq(tag.address, final_wa.address, authsize) ? -EBADMSG : 0; ccp_dm_free(&tag); } -e_tag: +e_final_wa: ccp_dm_free(&final_wa); e_dst: -- cgit From 0e14ef38669ce4faa80589247fe8ed8a3780f414 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Tue, 21 Sep 2021 22:40:26 -0700 Subject: crypto: x86/sm4 - Fix frame pointer stack corruption sm4_aesni_avx_crypt8() sets up the frame pointer (which includes pushing RBP) before doing a conditional sibling call to sm4_aesni_avx_crypt4(), which sets up an additional frame pointer. Things will not go well when sm4_aesni_avx_crypt4() pops only the innermost single frame pointer and then tries to return to the outermost frame pointer. Sibling calls need to occur with an empty stack frame. Do the conditional sibling call *before* setting up the stack pointer. This fixes the following warning: arch/x86/crypto/sm4-aesni-avx-asm_64.o: warning: objtool: sm4_aesni_avx_crypt8()+0x8: sibling call from callable instruction with modified stack frame Fixes: a7ee22ee1445 ("crypto: x86/sm4 - add AES-NI/AVX/x86_64 implementation") Reported-by: kernel test robot Reported-by: Arnd Bergmann Acked-by: Peter Zijlstra (Intel) Reviewed-by: Tianjia Zhang Signed-off-by: Josh Poimboeuf Signed-off-by: Herbert Xu --- arch/x86/crypto/sm4-aesni-avx-asm_64.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/crypto/sm4-aesni-avx-asm_64.S b/arch/x86/crypto/sm4-aesni-avx-asm_64.S index fa2c3f50aecb..18d2f5199194 100644 --- a/arch/x86/crypto/sm4-aesni-avx-asm_64.S +++ b/arch/x86/crypto/sm4-aesni-avx-asm_64.S @@ -367,10 +367,11 @@ SYM_FUNC_START(sm4_aesni_avx_crypt8) * %rdx: src (1..8 blocks) * %rcx: num blocks (1..8) */ - FRAME_BEGIN - cmpq $5, %rcx; jb sm4_aesni_avx_crypt4; + + FRAME_BEGIN + vmovdqu (0 * 16)(%rdx), RA0; vmovdqu (1 * 16)(%rdx), RA1; vmovdqu (2 * 16)(%rdx), RA2; -- cgit From f7e745f8e94492a8ac0b0a26e25f2b19d342918f Mon Sep 17 00:00:00 2001 From: Xin Long Date: Thu, 23 Sep 2021 00:05:04 -0400 Subject: sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb We should always check if skb_header_pointer's return is NULL before using it, otherwise it may cause null-ptr-deref, as syzbot reported: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline] RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196 Call Trace: sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109 ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422 ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297 Fixes: 3acb50c18d8d ("sctp: delay as much as possible skb_linearize") Reported-by: syzbot+581aff2ae6b860625116@syzkaller.appspotmail.com Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/input.c b/net/sctp/input.c index 5ef86fdb1176..1f1786021d9c 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -702,7 +702,7 @@ static int sctp_rcv_ootb(struct sk_buff *skb) ch = skb_header_pointer(skb, offset, sizeof(*ch), &_ch); /* Break out if chunk length is less then minimal. */ - if (ntohs(ch->length) < sizeof(_ch)) + if (!ch || ntohs(ch->length) < sizeof(_ch)) break; ch_end = offset + SCTP_PAD4(ntohs(ch->length)); -- cgit From ea1300b9df7c8e8b65695a08b8f6aaf4b25fec9c Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 23 Sep 2021 17:04:11 -0700 Subject: mptcp: don't return sockets in foreign netns mptcp_token_get_sock() may return a mptcp socket that is in a different net namespace than the socket that received the token value. The mptcp syncookie code path had an explicit check for this, this moves the test into mptcp_token_get_sock() function. Eventually token.c should be converted to pernet storage, but such change is not suitable for net tree. Fixes: 2c5ebd001d4f0 ("mptcp: refactor token container") Signed-off-by: Florian Westphal Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/mptcp_diag.c | 2 +- net/mptcp/protocol.h | 2 +- net/mptcp/subflow.c | 2 +- net/mptcp/syncookies.c | 13 +------------ net/mptcp/token.c | 11 ++++++++--- net/mptcp/token_test.c | 14 ++++++++------ 6 files changed, 20 insertions(+), 24 deletions(-) diff --git a/net/mptcp/mptcp_diag.c b/net/mptcp/mptcp_diag.c index f48eb6315bbb..292374fb0779 100644 --- a/net/mptcp/mptcp_diag.c +++ b/net/mptcp/mptcp_diag.c @@ -36,7 +36,7 @@ static int mptcp_diag_dump_one(struct netlink_callback *cb, struct sock *sk; net = sock_net(in_skb->sk); - msk = mptcp_token_get_sock(req->id.idiag_cookie[0]); + msk = mptcp_token_get_sock(net, req->id.idiag_cookie[0]); if (!msk) goto out_nosk; diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h index d3e6fd1615f1..dc984676c5eb 100644 --- a/net/mptcp/protocol.h +++ b/net/mptcp/protocol.h @@ -709,7 +709,7 @@ int mptcp_token_new_connect(struct sock *sk); void mptcp_token_accept(struct mptcp_subflow_request_sock *r, struct mptcp_sock *msk); bool mptcp_token_exists(u32 token); -struct mptcp_sock *mptcp_token_get_sock(u32 token); +struct mptcp_sock *mptcp_token_get_sock(struct net *net, u32 token); struct mptcp_sock *mptcp_token_iter_next(const struct net *net, long *s_slot, long *s_num); void mptcp_token_destroy(struct mptcp_sock *msk); diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c index 1de7ce883c37..6172f380dfb7 100644 --- a/net/mptcp/subflow.c +++ b/net/mptcp/subflow.c @@ -86,7 +86,7 @@ static struct mptcp_sock *subflow_token_join_request(struct request_sock *req) struct mptcp_sock *msk; int local_id; - msk = mptcp_token_get_sock(subflow_req->token); + msk = mptcp_token_get_sock(sock_net(req_to_sk(req)), subflow_req->token); if (!msk) { SUBFLOW_REQ_INC_STATS(req, MPTCP_MIB_JOINNOTOKEN); return NULL; diff --git a/net/mptcp/syncookies.c b/net/mptcp/syncookies.c index 37127781aee9..7f22526346a7 100644 --- a/net/mptcp/syncookies.c +++ b/net/mptcp/syncookies.c @@ -108,18 +108,12 @@ bool mptcp_token_join_cookie_init_state(struct mptcp_subflow_request_sock *subfl e->valid = 0; - msk = mptcp_token_get_sock(e->token); + msk = mptcp_token_get_sock(net, e->token); if (!msk) { spin_unlock_bh(&join_entry_locks[i]); return false; } - /* If this fails, the token got re-used in the mean time by another - * mptcp socket in a different netns, i.e. entry is outdated. - */ - if (!net_eq(sock_net((struct sock *)msk), net)) - goto err_put; - subflow_req->remote_nonce = e->remote_nonce; subflow_req->local_nonce = e->local_nonce; subflow_req->backup = e->backup; @@ -128,11 +122,6 @@ bool mptcp_token_join_cookie_init_state(struct mptcp_subflow_request_sock *subfl subflow_req->msk = msk; spin_unlock_bh(&join_entry_locks[i]); return true; - -err_put: - spin_unlock_bh(&join_entry_locks[i]); - sock_put((struct sock *)msk); - return false; } void __init mptcp_join_cookie_init(void) diff --git a/net/mptcp/token.c b/net/mptcp/token.c index a98e554b034f..e581b341c5be 100644 --- a/net/mptcp/token.c +++ b/net/mptcp/token.c @@ -231,6 +231,7 @@ found: /** * mptcp_token_get_sock - retrieve mptcp connection sock using its token + * @net: restrict to this namespace * @token: token of the mptcp connection to retrieve * * This function returns the mptcp connection structure with the given token. @@ -238,7 +239,7 @@ found: * * returns NULL if no connection with the given token value exists. */ -struct mptcp_sock *mptcp_token_get_sock(u32 token) +struct mptcp_sock *mptcp_token_get_sock(struct net *net, u32 token) { struct hlist_nulls_node *pos; struct token_bucket *bucket; @@ -251,11 +252,15 @@ struct mptcp_sock *mptcp_token_get_sock(u32 token) again: sk_nulls_for_each_rcu(sk, pos, &bucket->msk_chain) { msk = mptcp_sk(sk); - if (READ_ONCE(msk->token) != token) + if (READ_ONCE(msk->token) != token || + !net_eq(sock_net(sk), net)) continue; + if (!refcount_inc_not_zero(&sk->sk_refcnt)) goto not_found; - if (READ_ONCE(msk->token) != token) { + + if (READ_ONCE(msk->token) != token || + !net_eq(sock_net(sk), net)) { sock_put(sk); goto again; } diff --git a/net/mptcp/token_test.c b/net/mptcp/token_test.c index e1bd6f0a0676..5d984bec1cd8 100644 --- a/net/mptcp/token_test.c +++ b/net/mptcp/token_test.c @@ -11,6 +11,7 @@ static struct mptcp_subflow_request_sock *build_req_sock(struct kunit *test) GFP_USER); KUNIT_EXPECT_NOT_ERR_OR_NULL(test, req); mptcp_token_init_request((struct request_sock *)req); + sock_net_set((struct sock *)req, &init_net); return req; } @@ -22,7 +23,7 @@ static void mptcp_token_test_req_basic(struct kunit *test) KUNIT_ASSERT_EQ(test, 0, mptcp_token_new_request((struct request_sock *)req)); KUNIT_EXPECT_NE(test, 0, (int)req->token); - KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(req->token)); + KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(&init_net, req->token)); /* cleanup */ mptcp_token_destroy_request((struct request_sock *)req); @@ -55,6 +56,7 @@ static struct mptcp_sock *build_msk(struct kunit *test) msk = kunit_kzalloc(test, sizeof(struct mptcp_sock), GFP_USER); KUNIT_EXPECT_NOT_ERR_OR_NULL(test, msk); refcount_set(&((struct sock *)msk)->sk_refcnt, 1); + sock_net_set((struct sock *)msk, &init_net); return msk; } @@ -74,11 +76,11 @@ static void mptcp_token_test_msk_basic(struct kunit *test) mptcp_token_new_connect((struct sock *)icsk)); KUNIT_EXPECT_NE(test, 0, (int)ctx->token); KUNIT_EXPECT_EQ(test, ctx->token, msk->token); - KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(ctx->token)); + KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(&init_net, ctx->token)); KUNIT_EXPECT_EQ(test, 2, (int)refcount_read(&sk->sk_refcnt)); mptcp_token_destroy(msk); - KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(ctx->token)); + KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(&init_net, ctx->token)); } static void mptcp_token_test_accept(struct kunit *test) @@ -90,11 +92,11 @@ static void mptcp_token_test_accept(struct kunit *test) mptcp_token_new_request((struct request_sock *)req)); msk->token = req->token; mptcp_token_accept(req, msk); - KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(msk->token)); + KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(&init_net, msk->token)); /* this is now a no-op */ mptcp_token_destroy_request((struct request_sock *)req); - KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(msk->token)); + KUNIT_EXPECT_PTR_EQ(test, msk, mptcp_token_get_sock(&init_net, msk->token)); /* cleanup */ mptcp_token_destroy(msk); @@ -116,7 +118,7 @@ static void mptcp_token_test_destroyed(struct kunit *test) /* simulate race on removal */ refcount_set(&sk->sk_refcnt, 0); - KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(msk->token)); + KUNIT_EXPECT_PTR_EQ(test, null_msk, mptcp_token_get_sock(&init_net, msk->token)); /* cleanup */ mptcp_token_destroy(msk); -- cgit From 3f4a08909e2c740f8045efc74c4cf82eeaae3e36 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Thu, 23 Sep 2021 17:04:12 -0700 Subject: mptcp: allow changing the 'backup' bit when no sockets are open current Linux refuses to change the 'backup' bit of MPTCP endpoints, i.e. using MPTCP_PM_CMD_SET_FLAGS, unless it finds (at least) one subflow that matches the endpoint address. There is no reason for that, so we can just ignore the return value of mptcp_nl_addr_backup(). In this way, endpoints can reconfigure their 'backup' flag even if no MPTCP sockets are open (or more generally, in case the MP_PRIO message is not sent out). Fixes: 0f9f696a502e ("mptcp: add set_flags command in PM netlink") Signed-off-by: Davide Caratti Signed-off-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/pm_netlink.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index c4f9a5ce3815..050eea231528 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -1718,9 +1718,7 @@ static int mptcp_nl_cmd_set_flags(struct sk_buff *skb, struct genl_info *info) list_for_each_entry(entry, &pernet->local_addr_list, list) { if (addresses_equal(&entry->addr, &addr.addr, true)) { - ret = mptcp_nl_addr_backup(net, &entry->addr, bkup); - if (ret) - return ret; + mptcp_nl_addr_backup(net, &entry->addr, bkup); if (bkup) entry->flags |= MPTCP_PM_ADDR_FLAG_BACKUP; -- cgit From 5ba1071f7554c4027bdbd712a146111de57918de Mon Sep 17 00:00:00 2001 From: Numfor Mbiziwo-Tiapo Date: Thu, 23 Sep 2021 09:18:43 -0700 Subject: x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses Don't perform unaligned loads in __get_next() and __peek_nbyte_next() as these are forms of undefined behavior: "A pointer to an object or incomplete type may be converted to a pointer to a different object or incomplete type. If the resulting pointer is not correctly aligned for the pointed-to type, the behavior is undefined." (from http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf) These problems were identified using the undefined behavior sanitizer (ubsan) with the tools version of the code and perf test. [ bp: Massage commit message. ] Signed-off-by: Numfor Mbiziwo-Tiapo Signed-off-by: Ian Rogers Signed-off-by: Borislav Petkov Acked-by: Masami Hiramatsu Link: https://lkml.kernel.org/r/20210923161843.751834-1-irogers@google.com --- arch/x86/lib/insn.c | 4 ++-- tools/arch/x86/lib/insn.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c index 058f19b20465..c565def611e2 100644 --- a/arch/x86/lib/insn.c +++ b/arch/x86/lib/insn.c @@ -37,10 +37,10 @@ ((insn)->next_byte + sizeof(t) + n <= (insn)->end_kaddr) #define __get_next(t, insn) \ - ({ t r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, insn->next_byte, sizeof(t)); insn->next_byte += sizeof(t); leXX_to_cpu(t, r); }) #define __peek_nbyte_next(t, insn, n) \ - ({ t r = *(t*)((insn)->next_byte + n); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, (insn)->next_byte + n, sizeof(t)); leXX_to_cpu(t, r); }) #define get_next(t, insn) \ ({ if (unlikely(!validate_next(t, insn, 0))) goto err_out; __get_next(t, insn); }) diff --git a/tools/arch/x86/lib/insn.c b/tools/arch/x86/lib/insn.c index c41f95815480..797699462cd8 100644 --- a/tools/arch/x86/lib/insn.c +++ b/tools/arch/x86/lib/insn.c @@ -37,10 +37,10 @@ ((insn)->next_byte + sizeof(t) + n <= (insn)->end_kaddr) #define __get_next(t, insn) \ - ({ t r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, insn->next_byte, sizeof(t)); insn->next_byte += sizeof(t); leXX_to_cpu(t, r); }) #define __peek_nbyte_next(t, insn, n) \ - ({ t r = *(t*)((insn)->next_byte + n); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, (insn)->next_byte + n, sizeof(t)); leXX_to_cpu(t, r); }) #define get_next(t, insn) \ ({ if (unlikely(!validate_next(t, insn, 0))) goto err_out; __get_next(t, insn); }) -- cgit From 4bb0bd81ce5e97092dfda6a106d414b703ec0ee8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 25 Jul 2021 17:19:00 +0000 Subject: m68k: Handle arrivals of multiple signals correctly When we have several pending signals, have entered with the kernel with large exception frame *and* have already built at least one sigframe, regs->stkadj is going to be non-zero and regs->format/sr/pc are going to be junk - the real values are in shifted exception stack frame we'd built when putting together the first sigframe. If that happens, subsequent sigframes are going to be garbage. Not hard to fix - just need to find the "adjusted" frame first and look for format/vector/sr/pc in it. Signed-off-by: Al Viro Tested-by: Michael Schmitz Reviewed-by: Michael Schmitz Tested-by: Finn Thain Link: https://lore.kernel.org/r/YP2dBIAPTaVvHiZ6@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven --- arch/m68k/kernel/signal.c | 88 ++++++++++++++++++++++------------------------- 1 file changed, 42 insertions(+), 46 deletions(-) diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c index 8f215e79e70e..cd11eb101eac 100644 --- a/arch/m68k/kernel/signal.c +++ b/arch/m68k/kernel/signal.c @@ -447,7 +447,7 @@ static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs) if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) { fpu_version = sc->sc_fpstate[0]; - if (CPU_IS_020_OR_030 && + if (CPU_IS_020_OR_030 && !regs->stkadj && regs->vector >= (VEC_FPBRUC * 4) && regs->vector <= (VEC_FPNAN * 4)) { /* Clear pending exception in 68882 idle frame */ @@ -510,7 +510,7 @@ static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs * if (!(CPU_IS_060 || CPU_IS_COLDFIRE)) context_size = fpstate[1]; fpu_version = fpstate[0]; - if (CPU_IS_020_OR_030 && + if (CPU_IS_020_OR_030 && !regs->stkadj && regs->vector >= (VEC_FPBRUC * 4) && regs->vector <= (VEC_FPNAN * 4)) { /* Clear pending exception in 68882 idle frame */ @@ -832,18 +832,24 @@ badframe: return 0; } +static inline struct pt_regs *rte_regs(struct pt_regs *regs) +{ + return (void *)regs + regs->stkadj; +} + static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs, unsigned long mask) { + struct pt_regs *tregs = rte_regs(regs); sc->sc_mask = mask; sc->sc_usp = rdusp(); sc->sc_d0 = regs->d0; sc->sc_d1 = regs->d1; sc->sc_a0 = regs->a0; sc->sc_a1 = regs->a1; - sc->sc_sr = regs->sr; - sc->sc_pc = regs->pc; - sc->sc_formatvec = regs->format << 12 | regs->vector; + sc->sc_sr = tregs->sr; + sc->sc_pc = tregs->pc; + sc->sc_formatvec = tregs->format << 12 | tregs->vector; save_a5_state(sc, regs); save_fpu_state(sc, regs); } @@ -851,6 +857,7 @@ static void setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs, static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs *regs) { struct switch_stack *sw = (struct switch_stack *)regs - 1; + struct pt_regs *tregs = rte_regs(regs); greg_t __user *gregs = uc->uc_mcontext.gregs; int err = 0; @@ -871,9 +878,9 @@ static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs * err |= __put_user(sw->a5, &gregs[13]); err |= __put_user(sw->a6, &gregs[14]); err |= __put_user(rdusp(), &gregs[15]); - err |= __put_user(regs->pc, &gregs[16]); - err |= __put_user(regs->sr, &gregs[17]); - err |= __put_user((regs->format << 12) | regs->vector, &uc->uc_formatvec); + err |= __put_user(tregs->pc, &gregs[16]); + err |= __put_user(tregs->sr, &gregs[17]); + err |= __put_user((tregs->format << 12) | tregs->vector, &uc->uc_formatvec); err |= rt_save_fpu_state(uc, regs); return err; } @@ -890,13 +897,14 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) { struct sigframe __user *frame; - int fsize = frame_extra_sizes(regs->format); + struct pt_regs *tregs = rte_regs(regs); + int fsize = frame_extra_sizes(tregs->format); struct sigcontext context; int err = 0, sig = ksig->sig; if (fsize < 0) { pr_debug("setup_frame: Unknown frame format %#x\n", - regs->format); + tregs->format); return -EFAULT; } @@ -907,7 +915,7 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set, err |= __put_user(sig, &frame->sig); - err |= __put_user(regs->vector, &frame->code); + err |= __put_user(tregs->vector, &frame->code); err |= __put_user(&frame->sc, &frame->psc); if (_NSIG_WORDS > 1) @@ -933,34 +941,28 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set, push_cache ((unsigned long) &frame->retcode); - /* - * Set up registers for signal handler. All the state we are about - * to destroy is successfully copied to sigframe. - */ - wrusp ((unsigned long) frame); - regs->pc = (unsigned long) ksig->ka.sa.sa_handler; - adjustformat(regs); - /* * This is subtle; if we build more than one sigframe, all but the * first one will see frame format 0 and have fsize == 0, so we won't * screw stkadj. */ - if (fsize) + if (fsize) { regs->stkadj = fsize; - - /* Prepare to skip over the extra stuff in the exception frame. */ - if (regs->stkadj) { - struct pt_regs *tregs = - (struct pt_regs *)((ulong)regs + regs->stkadj); + tregs = rte_regs(regs); pr_debug("Performing stackadjust=%04lx\n", regs->stkadj); - /* This must be copied with decreasing addresses to - handle overlaps. */ tregs->vector = 0; tregs->format = 0; - tregs->pc = regs->pc; tregs->sr = regs->sr; } + + /* + * Set up registers for signal handler. All the state we are about + * to destroy is successfully copied to sigframe. + */ + wrusp ((unsigned long) frame); + tregs->pc = (unsigned long) ksig->ka.sa.sa_handler; + adjustformat(regs); + return 0; } @@ -968,7 +970,8 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) { struct rt_sigframe __user *frame; - int fsize = frame_extra_sizes(regs->format); + struct pt_regs *tregs = rte_regs(regs); + int fsize = frame_extra_sizes(tregs->format); int err = 0, sig = ksig->sig; if (fsize < 0) { @@ -1018,34 +1021,27 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, push_cache ((unsigned long) &frame->retcode); - /* - * Set up registers for signal handler. All the state we are about - * to destroy is successfully copied to sigframe. - */ - wrusp ((unsigned long) frame); - regs->pc = (unsigned long) ksig->ka.sa.sa_handler; - adjustformat(regs); - /* * This is subtle; if we build more than one sigframe, all but the * first one will see frame format 0 and have fsize == 0, so we won't * screw stkadj. */ - if (fsize) + if (fsize) { regs->stkadj = fsize; - - /* Prepare to skip over the extra stuff in the exception frame. */ - if (regs->stkadj) { - struct pt_regs *tregs = - (struct pt_regs *)((ulong)regs + regs->stkadj); + tregs = rte_regs(regs); pr_debug("Performing stackadjust=%04lx\n", regs->stkadj); - /* This must be copied with decreasing addresses to - handle overlaps. */ tregs->vector = 0; tregs->format = 0; - tregs->pc = regs->pc; tregs->sr = regs->sr; } + + /* + * Set up registers for signal handler. All the state we are about + * to destroy is successfully copied to sigframe. + */ + wrusp ((unsigned long) frame); + tregs->pc = (unsigned long) ksig->ka.sa.sa_handler; + adjustformat(regs); return 0; } -- cgit From 50e43a57334400668952f8e551c9d87d3ed2dfef Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 25 Jul 2021 17:19:45 +0000 Subject: m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signal We get there when sigreturn has performed obscene acts on kernel stack; in particular, the location of pt_regs has shifted. We are about to call syscall_trace(), which might stop for tracer. If that happens, we'd better have task_pt_regs() returning correct result... Fucked-up-by: Al Viro Fixes: bd6f56a75bb2 ("m68k: Missing syscall_trace() on sigreturn") Signed-off-by: Al Viro Tested-by: Michael Schmitz Reviewed-by: Michael Schmitz Tested-by: Finn Thain Link: https://lore.kernel.org/r/YP2dMWeV1LkHiOpr@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven --- arch/m68k/kernel/entry.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 9dd76fbb7c6b..ff9e842cec0f 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -186,6 +186,8 @@ ENTRY(ret_from_signal) movel %curptr@(TASK_STACK),%a1 tstb %a1@(TINFO_FLAGS+2) jge 1f + lea %sp@(SWITCH_STACK_SIZE),%a1 + movel %a1,%curptr@(TASK_THREAD+THREAD_ESP0) jbsr syscall_trace 1: RESTORE_SWITCH_STACK addql #4,%sp -- cgit From 0d20abde987bed05a8963c8aa4276019d54ff9e7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 25 Jul 2021 17:20:13 +0000 Subject: m68k: Leave stack mangling to asm wrapper of sigreturn() sigreturn has to deal with an unpleasant problem - exception stack frames have different sizes, depending upon the exception (and processor model, as well) and variable-sized part of exception frame may contain information needed for instruction restart. So when signal handler terminates and calls sigreturn to resume the execution at the place where we'd been when we caught the signal, it has to rearrange the frame at the bottom of kernel stack. Worse, it might need to open a gap in the kernel stack, shifting pt_regs towards lower addresses. Doing that from C is insane - we'd need to shift stack frames (return addresses, local variables, etc.) of C call chain, right under the nose of compiler and hope it won't fall apart horribly. What had been actually done is only slightly less insane - an inline asm in mangle_kernel_stack() moved the stuff around, then reset stack pointer and jumped to label in asm glue. However, we can avoid all that mess if the asm wrapper we have to use anyway would reserve some space on the stack between switch_stack and the C stack frame of do_{rt_,}sigreturn(). Then C part can simply memmove() pt_regs + switch_stack, memcpy() the variable part of exception frame into the opened gap - all of that without inline asm, buggering C call chain, magical jumps to asm labels, etc. Asm wrapper would need to know where the moved switch_stack has ended up - it might have been shifted into the gap we'd reserved before do_rt_sigreturn() call. That's where it needs to set the stack pointer to. So let the C part return just that and be done with that. While we are at it, the call of berr_040cleanup() we need to do when returning via 68040 bus error exception frame can be moved into C part as well. Signed-off-by: Al Viro Tested-by: Michael Schmitz Reviewed-by: Michael Schmitz Tested-by: Finn Thain Link: https://lore.kernel.org/r/YP2dTQPm1wGPWFgD@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven --- arch/m68k/68000/entry.S | 3 -- arch/m68k/coldfire/entry.S | 3 -- arch/m68k/include/asm/traps.h | 4 ++ arch/m68k/kernel/entry.S | 55 ++++++++++----------- arch/m68k/kernel/signal.c | 111 ++++++++++++++++-------------------------- 5 files changed, 71 insertions(+), 105 deletions(-) diff --git a/arch/m68k/68000/entry.S b/arch/m68k/68000/entry.S index 259b3661b614..cce465e850fe 100644 --- a/arch/m68k/68000/entry.S +++ b/arch/m68k/68000/entry.S @@ -25,7 +25,6 @@ .globl system_call .globl resume .globl ret_from_exception -.globl ret_from_signal .globl sys_call_table .globl bad_interrupt .globl inthandler1 @@ -59,8 +58,6 @@ do_trace: subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK jbsr syscall_trace_leave - -ret_from_signal: RESTORE_SWITCH_STACK addql #4,%sp jra ret_from_exception diff --git a/arch/m68k/coldfire/entry.S b/arch/m68k/coldfire/entry.S index d43a02795a4a..68adb7b5b296 100644 --- a/arch/m68k/coldfire/entry.S +++ b/arch/m68k/coldfire/entry.S @@ -51,7 +51,6 @@ sw_usp: .globl system_call .globl resume .globl ret_from_exception -.globl ret_from_signal .globl sys_call_table .globl inthandler @@ -98,8 +97,6 @@ ENTRY(system_call) subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK jbsr syscall_trace_leave - -ret_from_signal: RESTORE_SWITCH_STACK addql #4,%sp diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h index 4aff3358fbaf..a9d5c1c870d3 100644 --- a/arch/m68k/include/asm/traps.h +++ b/arch/m68k/include/asm/traps.h @@ -267,6 +267,10 @@ struct frame { } un; }; +#ifdef CONFIG_M68040 +asmlinkage void berr_040cleanup(struct frame *fp); +#endif + #endif /* __ASSEMBLY__ */ #endif /* _M68K_TRAPS_H */ diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index ff9e842cec0f..8fa9822b5922 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -78,20 +78,38 @@ ENTRY(__sys_clone3) ENTRY(sys_sigreturn) SAVE_SWITCH_STACK - movel %sp,%sp@- | switch_stack pointer - pea %sp@(SWITCH_STACK_SIZE+4) | pt_regs pointer + movel %sp,%a1 | switch_stack pointer + lea %sp@(SWITCH_STACK_SIZE),%a0 | pt_regs pointer + lea %sp@(-84),%sp | leave a gap + movel %a1,%sp@- + movel %a0,%sp@- jbsr do_sigreturn - addql #8,%sp - RESTORE_SWITCH_STACK - rts + jra 1f | shared with rt_sigreturn() ENTRY(sys_rt_sigreturn) SAVE_SWITCH_STACK - movel %sp,%sp@- | switch_stack pointer - pea %sp@(SWITCH_STACK_SIZE+4) | pt_regs pointer + movel %sp,%a1 | switch_stack pointer + lea %sp@(SWITCH_STACK_SIZE),%a0 | pt_regs pointer + lea %sp@(-84),%sp | leave a gap + movel %a1,%sp@- + movel %a0,%sp@- + | stack contents: + | [original pt_regs address] [original switch_stack address] + | [gap] [switch_stack] [pt_regs] [exception frame] jbsr do_rt_sigreturn - addql #8,%sp + +1: + | stack contents now: + | [original pt_regs address] [original switch_stack address] + | [unused part of the gap] [moved switch_stack] [moved pt_regs] + | [replacement exception frame] + | return value of do_{rt_,}sigreturn() points to moved switch_stack. + + movel %d0,%sp | discard the leftover junk RESTORE_SWITCH_STACK + | stack contents now is just [syscall return address] [pt_regs] [frame] + | return pt_regs.d0 + movel %sp@(PT_OFF_D0+4),%d0 rts ENTRY(buserr) @@ -182,27 +200,6 @@ do_trace_exit: addql #4,%sp jra .Lret_from_exception -ENTRY(ret_from_signal) - movel %curptr@(TASK_STACK),%a1 - tstb %a1@(TINFO_FLAGS+2) - jge 1f - lea %sp@(SWITCH_STACK_SIZE),%a1 - movel %a1,%curptr@(TASK_THREAD+THREAD_ESP0) - jbsr syscall_trace -1: RESTORE_SWITCH_STACK - addql #4,%sp -/* on 68040 complete pending writebacks if any */ -#ifdef CONFIG_M68040 - bfextu %sp@(PT_OFF_FORMATVEC){#0,#4},%d0 - subql #7,%d0 | bus error frame ? - jbne 1f - movel %sp,%sp@- - jbsr berr_040cleanup - addql #4,%sp -1: -#endif - jra .Lret_from_exception - ENTRY(system_call) SAVE_ALL_SYS diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c index cd11eb101eac..338817d0cb3f 100644 --- a/arch/m68k/kernel/signal.c +++ b/arch/m68k/kernel/signal.c @@ -641,56 +641,35 @@ static inline void siginfo_build_tests(void) static int mangle_kernel_stack(struct pt_regs *regs, int formatvec, void __user *fp) { - int fsize = frame_extra_sizes(formatvec >> 12); - if (fsize < 0) { + int extra = frame_extra_sizes(formatvec >> 12); + char buf[sizeof_field(struct frame, un)]; + + if (extra < 0) { /* * user process trying to return with weird frame format */ pr_debug("user process returning with weird frame format\n"); - return 1; + return -1; } - if (!fsize) { - regs->format = formatvec >> 12; - regs->vector = formatvec & 0xfff; - } else { - struct switch_stack *sw = (struct switch_stack *)regs - 1; - /* yes, twice as much as max(sizeof(frame.un.fmt)) */ - unsigned long buf[sizeof_field(struct frame, un) / 2]; - - /* that'll make sure that expansion won't crap over data */ - if (copy_from_user(buf + fsize / 4, fp, fsize)) - return 1; - - /* point of no return */ - regs->format = formatvec >> 12; - regs->vector = formatvec & 0xfff; -#define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack)) - __asm__ __volatile__ ( -#ifdef CONFIG_COLDFIRE - " movel %0,%/sp\n\t" - " bra ret_from_signal\n" -#else - " movel %0,%/a0\n\t" - " subl %1,%/a0\n\t" /* make room on stack */ - " movel %/a0,%/sp\n\t" /* set stack pointer */ - /* move switch_stack and pt_regs */ - "1: movel %0@+,%/a0@+\n\t" - " dbra %2,1b\n\t" - " lea %/sp@(%c3),%/a0\n\t" /* add offset of fmt */ - " lsrl #2,%1\n\t" - " subql #1,%1\n\t" - /* copy to the gap we'd made */ - "2: movel %4@+,%/a0@+\n\t" - " dbra %1,2b\n\t" - " bral ret_from_signal\n" + if (extra && copy_from_user(buf, fp, extra)) + return -1; + regs->format = formatvec >> 12; + regs->vector = formatvec & 0xfff; + if (extra) { + void *p = (struct switch_stack *)regs - 1; + struct frame *new = (void *)regs - extra; + int size = sizeof(struct pt_regs)+sizeof(struct switch_stack); + + memmove(p - extra, p, size); + memcpy(p - extra + size, buf, extra); + current->thread.esp0 = (unsigned long)&new->ptregs; +#ifdef CONFIG_M68040 + /* on 68040 complete pending writebacks if any */ + if (new->ptregs.format == 7) // bus error frame + berr_040cleanup(new); #endif - : /* no outputs, it doesn't ever return */ - : "a" (sw), "d" (fsize), "d" (frame_offset/4-1), - "n" (frame_offset), "a" (buf + fsize/4) - : "a0"); -#undef frame_offset } - return 0; + return extra; } static inline int @@ -698,7 +677,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc, void __u { int formatvec; struct sigcontext context; - int err = 0; siginfo_build_tests(); @@ -707,7 +685,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc, void __u /* get previous context */ if (copy_from_user(&context, usc, sizeof(context))) - goto badframe; + return -1; /* restore passed registers */ regs->d0 = context.sc_d0; @@ -720,15 +698,10 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc, void __u wrusp(context.sc_usp); formatvec = context.sc_formatvec; - err = restore_fpu_state(&context); - - if (err || mangle_kernel_stack(regs, formatvec, fp)) - goto badframe; - - return 0; + if (restore_fpu_state(&context)) + return -1; -badframe: - return 1; + return mangle_kernel_stack(regs, formatvec, fp); } static inline int @@ -745,7 +718,7 @@ rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw, err = __get_user(temp, &uc->uc_mcontext.version); if (temp != MCONTEXT_VERSION) - goto badframe; + return -1; /* restore passed registers */ err |= __get_user(regs->d0, &gregs[0]); err |= __get_user(regs->d1, &gregs[1]); @@ -774,22 +747,17 @@ rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw, err |= restore_altstack(&uc->uc_stack); if (err) - goto badframe; - - if (mangle_kernel_stack(regs, temp, &uc->uc_extra)) - goto badframe; + return -1; - return 0; - -badframe: - return 1; + return mangle_kernel_stack(regs, temp, &uc->uc_extra); } -asmlinkage int do_sigreturn(struct pt_regs *regs, struct switch_stack *sw) +asmlinkage void *do_sigreturn(struct pt_regs *regs, struct switch_stack *sw) { unsigned long usp = rdusp(); struct sigframe __user *frame = (struct sigframe __user *)(usp - 4); sigset_t set; + int size; if (!access_ok(frame, sizeof(*frame))) goto badframe; @@ -801,20 +769,22 @@ asmlinkage int do_sigreturn(struct pt_regs *regs, struct switch_stack *sw) set_current_blocked(&set); - if (restore_sigcontext(regs, &frame->sc, frame + 1)) + size = restore_sigcontext(regs, &frame->sc, frame + 1); + if (size < 0) goto badframe; - return regs->d0; + return (void *)sw - size; badframe: force_sig(SIGSEGV); - return 0; + return sw; } -asmlinkage int do_rt_sigreturn(struct pt_regs *regs, struct switch_stack *sw) +asmlinkage void *do_rt_sigreturn(struct pt_regs *regs, struct switch_stack *sw) { unsigned long usp = rdusp(); struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(usp - 4); sigset_t set; + int size; if (!access_ok(frame, sizeof(*frame))) goto badframe; @@ -823,13 +793,14 @@ asmlinkage int do_rt_sigreturn(struct pt_regs *regs, struct switch_stack *sw) set_current_blocked(&set); - if (rt_restore_ucontext(regs, sw, &frame->uc)) + size = rt_restore_ucontext(regs, sw, &frame->uc); + if (size < 0) goto badframe; - return regs->d0; + return (void *)sw - size; badframe: force_sig(SIGSEGV); - return 0; + return sw; } static inline struct pt_regs *rte_regs(struct pt_regs *regs) -- cgit From 1dc4027bc8b524ed03c4db391cd7910eb4ee19d2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:00 +0200 Subject: m68k: Document that access_ok is broken for !CONFIG_CPU_HAS_ADDRESS_SPACES Document that access_ok is completely broken for coldfire and friends at the moment. Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-2-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/uaccess.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index f98208ccbbcd..610bfe8d64d5 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -16,6 +16,10 @@ static inline int access_ok(const void __user *addr, unsigned long size) { + /* + * XXX: for !CONFIG_CPU_HAS_ADDRESS_SPACES this really needs to check + * for TASK_SIZE! + */ return 1; } -- cgit From c4f607c3124e4d2f33604f933b29496ce4111753 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:01 +0200 Subject: m68k: Remove the 030 case in virt_to_phys_slow The 030 case in virt_to_phys_slow can't ever be reached, so remove it. Suggested-by: Michael Schmitz Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-3-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/mm/cache.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c index b486c0889eec..e7c1cabbfac4 100644 --- a/arch/m68k/mm/cache.c +++ b/arch/m68k/mm/cache.c @@ -49,24 +49,7 @@ static unsigned long virt_to_phys_slow(unsigned long vaddr) if (mmusr & MMU_R_040) return (mmusr & PAGE_MASK) | (vaddr & ~PAGE_MASK); } else { - unsigned short mmusr; - unsigned long *descaddr; - - asm volatile ("ptestr %3,%2@,#7,%0\n\t" - "pmove %%psr,%1" - : "=a&" (descaddr), "=m" (mmusr) - : "a" (vaddr), "d" (get_fs().seg)); - if (mmusr & (MMU_I|MMU_B|MMU_L)) - return 0; - descaddr = phys_to_virt((unsigned long)descaddr); - switch (mmusr & MMU_NUM) { - case 1: - return (*descaddr & 0xfe000000) | (vaddr & 0x01ffffff); - case 2: - return (*descaddr & 0xfffc0000) | (vaddr & 0x0003ffff); - case 3: - return (*descaddr & PAGE_MASK) | (vaddr & ~PAGE_MASK); - } + WARN_ON_ONCE(!CPU_IS_040_OR_060); } return 0; } -- cgit From 25d2cae4a5578695f667e868ada38b0b73eb1080 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:02 +0200 Subject: m68k: Use BUILD_BUG for passing invalid sizes to get_user/put_user Simplify the handling a bit by using the common helper instead of referencing undefined symbols. Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-4-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/uaccess.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index 610bfe8d64d5..01334a9658c4 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -39,9 +39,6 @@ static inline int access_ok(const void __user *addr, #define MOVES "move" #endif -extern int __put_user_bad(void); -extern int __get_user_bad(void); - #define __put_user_asm(res, x, ptr, bwl, reg, err) \ asm volatile ("\n" \ "1: "MOVES"."#bwl" %2,%1\n" \ @@ -105,8 +102,7 @@ asm volatile ("\n" \ break; \ } \ default: \ - __pu_err = __put_user_bad(); \ - break; \ + BUILD_BUG(); \ } \ __pu_err; \ }) @@ -179,8 +175,7 @@ asm volatile ("\n" \ break; \ } \ default: \ - __gu_err = __get_user_bad(); \ - break; \ + BUILD_BUG(); \ } \ __gu_err; \ }) -- cgit From 01eec1af5ec49b331948ace8f2287580e1594383 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:03 +0200 Subject: m68k: Factor the 8-byte lowlevel {get,put}_user code into helpers Add new helpers for doing the grunt work of the 8-byte {get,put}_user routines to allow for better reuse. Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-5-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/uaccess.h | 111 ++++++++++++++++++++++------------------ 1 file changed, 60 insertions(+), 51 deletions(-) diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index 01334a9658c4..288ef7d11a7a 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -57,6 +57,31 @@ asm volatile ("\n" \ : "+d" (res), "=m" (*(ptr)) \ : #reg (x), "i" (err)) +#define __put_user_asm8(res, x, ptr) \ +do { \ + const void *__pu_ptr = (const void __force *)(ptr); \ + \ + asm volatile ("\n" \ + "1: "MOVES".l %2,(%1)+\n" \ + "2: "MOVES".l %R2,(%1)\n" \ + "3:\n" \ + " .section .fixup,\"ax\"\n" \ + " .even\n" \ + "10: movel %3,%0\n" \ + " jra 3b\n" \ + " .previous\n" \ + "\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,10b\n" \ + " .long 2b,10b\n" \ + " .long 3b,10b\n" \ + " .previous" \ + : "+d" (res), "+a" (__pu_ptr) \ + : "r" (x), "i" (-EFAULT) \ + : "memory"); \ +} while (0) + /* * These are the main single-value transfer routines. They automatically * use the right size if we just have the right pointer type. @@ -78,29 +103,8 @@ asm volatile ("\n" \ __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \ break; \ case 8: \ - { \ - const void __user *__pu_ptr = (ptr); \ - asm volatile ("\n" \ - "1: "MOVES".l %2,(%1)+\n" \ - "2: "MOVES".l %R2,(%1)\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: movel %3,%0\n" \ - " jra 3b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .long 2b,10b\n" \ - " .long 3b,10b\n" \ - " .previous" \ - : "+d" (__pu_err), "+a" (__pu_ptr) \ - : "r" (__pu_val), "i" (-EFAULT) \ - : "memory"); \ + __put_user_asm8(__pu_err, __pu_val, ptr); \ break; \ - } \ default: \ BUILD_BUG(); \ } \ @@ -130,6 +134,38 @@ asm volatile ("\n" \ (x) = (__force typeof(*(ptr)))(__force unsigned long)__gu_val; \ }) +#define __get_user_asm8(res, x, ptr) \ +do { \ + const void *__gu_ptr = (const void __force *)(ptr); \ + union { \ + u64 l; \ + __typeof__(*(ptr)) t; \ + } __gu_val; \ + \ + asm volatile ("\n" \ + "1: "MOVES".l (%2)+,%1\n" \ + "2: "MOVES".l (%2),%R1\n" \ + "3:\n" \ + " .section .fixup,\"ax\"\n" \ + " .even\n" \ + "10: move.l %3,%0\n" \ + " sub.l %1,%1\n" \ + " sub.l %R1,%R1\n" \ + " jra 3b\n" \ + " .previous\n" \ + "\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,10b\n" \ + " .long 2b,10b\n" \ + " .previous" \ + : "+d" (res), "=&r" (__gu_val.l), \ + "+a" (__gu_ptr) \ + : "i" (-EFAULT) \ + : "memory"); \ + (x) = __gu_val.t; \ +} while (0) + #define __get_user(x, ptr) \ ({ \ int __gu_err = 0; \ @@ -144,36 +180,9 @@ asm volatile ("\n" \ case 4: \ __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \ break; \ - case 8: { \ - const void __user *__gu_ptr = (ptr); \ - union { \ - u64 l; \ - __typeof__(*(ptr)) t; \ - } __gu_val; \ - asm volatile ("\n" \ - "1: "MOVES".l (%2)+,%1\n" \ - "2: "MOVES".l (%2),%R1\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: move.l %3,%0\n" \ - " sub.l %1,%1\n" \ - " sub.l %R1,%R1\n" \ - " jra 3b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .long 2b,10b\n" \ - " .previous" \ - : "+d" (__gu_err), "=&r" (__gu_val.l), \ - "+a" (__gu_ptr) \ - : "i" (-EFAULT) \ - : "memory"); \ - (x) = __gu_val.t; \ + case 8: \ + __get_user_asm8(__gu_err, x, ptr); \ break; \ - } \ default: \ BUILD_BUG(); \ } \ -- cgit From 8ade83390930d61c64fe3ab49081990c9d43d0d2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:04 +0200 Subject: m68k: Provide __{get,put}_kernel_nofault Allow non-faulting access to kernel addresses without overriding the address space. Implemented by passing the instruction name to the low-level assembly macros as an argument, and force the use of the normal move instructions for kernel access. Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-6-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/uaccess.h | 105 ++++++++++++++++++++++++++++++++-------- 1 file changed, 84 insertions(+), 21 deletions(-) diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index 288ef7d11a7a..65581a7874d4 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -39,9 +39,9 @@ static inline int access_ok(const void __user *addr, #define MOVES "move" #endif -#define __put_user_asm(res, x, ptr, bwl, reg, err) \ +#define __put_user_asm(inst, res, x, ptr, bwl, reg, err) \ asm volatile ("\n" \ - "1: "MOVES"."#bwl" %2,%1\n" \ + "1: "inst"."#bwl" %2,%1\n" \ "2:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ @@ -57,13 +57,13 @@ asm volatile ("\n" \ : "+d" (res), "=m" (*(ptr)) \ : #reg (x), "i" (err)) -#define __put_user_asm8(res, x, ptr) \ +#define __put_user_asm8(inst, res, x, ptr) \ do { \ const void *__pu_ptr = (const void __force *)(ptr); \ \ asm volatile ("\n" \ - "1: "MOVES".l %2,(%1)+\n" \ - "2: "MOVES".l %R2,(%1)\n" \ + "1: "inst".l %2,(%1)+\n" \ + "2: "inst".l %R2,(%1)\n" \ "3:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ @@ -94,16 +94,16 @@ do { \ __chk_user_ptr(ptr); \ switch (sizeof (*(ptr))) { \ case 1: \ - __put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT); \ + __put_user_asm(MOVES, __pu_err, __pu_val, ptr, b, d, -EFAULT); \ break; \ case 2: \ - __put_user_asm(__pu_err, __pu_val, ptr, w, r, -EFAULT); \ + __put_user_asm(MOVES, __pu_err, __pu_val, ptr, w, r, -EFAULT); \ break; \ case 4: \ - __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \ + __put_user_asm(MOVES, __pu_err, __pu_val, ptr, l, r, -EFAULT); \ break; \ case 8: \ - __put_user_asm8(__pu_err, __pu_val, ptr); \ + __put_user_asm8(MOVES, __pu_err, __pu_val, ptr); \ break; \ default: \ BUILD_BUG(); \ @@ -113,10 +113,10 @@ do { \ #define put_user(x, ptr) __put_user(x, ptr) -#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \ +#define __get_user_asm(inst, res, x, ptr, type, bwl, reg, err) ({ \ type __gu_val; \ asm volatile ("\n" \ - "1: "MOVES"."#bwl" %2,%1\n" \ + "1: "inst"."#bwl" %2,%1\n" \ "2:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ @@ -134,7 +134,7 @@ do { \ (x) = (__force typeof(*(ptr)))(__force unsigned long)__gu_val; \ }) -#define __get_user_asm8(res, x, ptr) \ +#define __get_user_asm8(inst, res, x, ptr) \ do { \ const void *__gu_ptr = (const void __force *)(ptr); \ union { \ @@ -143,8 +143,8 @@ do { \ } __gu_val; \ \ asm volatile ("\n" \ - "1: "MOVES".l (%2)+,%1\n" \ - "2: "MOVES".l (%2),%R1\n" \ + "1: "inst".l (%2)+,%1\n" \ + "2: "inst".l (%2),%R1\n" \ "3:\n" \ " .section .fixup,\"ax\"\n" \ " .even\n" \ @@ -172,16 +172,16 @@ do { \ __chk_user_ptr(ptr); \ switch (sizeof(*(ptr))) { \ case 1: \ - __get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT); \ + __get_user_asm(MOVES, __gu_err, x, ptr, u8, b, d, -EFAULT); \ break; \ case 2: \ - __get_user_asm(__gu_err, x, ptr, u16, w, r, -EFAULT); \ + __get_user_asm(MOVES, __gu_err, x, ptr, u16, w, r, -EFAULT); \ break; \ case 4: \ - __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \ + __get_user_asm(MOVES, __gu_err, x, ptr, u32, l, r, -EFAULT); \ break; \ case 8: \ - __get_user_asm8(__gu_err, x, ptr); \ + __get_user_asm8(MOVES, __gu_err, x, ptr); \ break; \ default: \ BUILD_BUG(); \ @@ -330,16 +330,19 @@ __constant_copy_to_user(void __user *to, const void *from, unsigned long n) switch (n) { case 1: - __put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1); + __put_user_asm(MOVES, res, *(u8 *)from, (u8 __user *)to, + b, d, 1); break; case 2: - __put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, r, 2); + __put_user_asm(MOVES, res, *(u16 *)from, (u16 __user *)to, + w, r, 2); break; case 3: __constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,); break; case 4: - __put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4); + __put_user_asm(MOVES, res, *(u32 *)from, (u32 __user *)to, + l, r, 4); break; case 5: __constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,); @@ -388,6 +391,66 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n) #define INLINE_COPY_FROM_USER #define INLINE_COPY_TO_USER +#define HAVE_GET_KERNEL_NOFAULT + +#define __get_kernel_nofault(dst, src, type, err_label) \ +do { \ + type *__gk_dst = (type *)(dst); \ + type *__gk_src = (type *)(src); \ + int __gk_err = 0; \ + \ + switch (sizeof(type)) { \ + case 1: \ + __get_user_asm("move", __gk_err, *__gk_dst, __gk_src, \ + u8, b, d, -EFAULT); \ + break; \ + case 2: \ + __get_user_asm("move", __gk_err, *__gk_dst, __gk_src, \ + u16, w, r, -EFAULT); \ + break; \ + case 4: \ + __get_user_asm("move", __gk_err, *__gk_dst, __gk_src, \ + u32, l, r, -EFAULT); \ + break; \ + case 8: \ + __get_user_asm8("move", __gk_err, *__gk_dst, __gk_src); \ + break; \ + default: \ + BUILD_BUG(); \ + } \ + if (unlikely(__gk_err)) \ + goto err_label; \ +} while (0) + +#define __put_kernel_nofault(dst, src, type, err_label) \ +do { \ + type __pk_src = *(type *)(src); \ + type *__pk_dst = (type *)(dst); \ + int __pk_err = 0; \ + \ + switch (sizeof(type)) { \ + case 1: \ + __put_user_asm("move", __pk_err, __pk_src, __pk_dst, \ + b, d, -EFAULT); \ + break; \ + case 2: \ + __put_user_asm("move", __pk_err, __pk_src, __pk_dst, \ + w, r, -EFAULT); \ + break; \ + case 4: \ + __put_user_asm("move", __pk_err, __pk_src, __pk_dst, \ + l, r, -EFAULT); \ + break; \ + case 8: \ + __put_user_asm8("move", __pk_err, __pk_src, __pk_dst); \ + break; \ + default: \ + BUILD_BUG(); \ + } \ + if (unlikely(__pk_err)) \ + goto err_label; \ +} while (0) + #define user_addr_max() \ (uaccess_kernel() ? ~0UL : TASK_SIZE) -- cgit From 9fde0348640252c79d462c4d29a09a14e8741f5c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2021 09:04:05 +0200 Subject: m68k: Remove set_fs() Add a m68k-only set_fc helper to set the SFC and DFC registers for the few places that need to override it for special MM operations, but disconnect that from the deprecated kernel-wide set_fs() API. Note that the SFC/DFC registers are context switched, so there is no need to disable preemption. Partially based on an earlier patch from Linus Torvalds . Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-7-hch@lst.de Signed-off-by: Geert Uytterhoeven --- arch/m68k/68000/entry.S | 1 - arch/m68k/Kconfig | 1 - arch/m68k/coldfire/entry.S | 1 - arch/m68k/include/asm/processor.h | 31 +++++++++++++++++-- arch/m68k/include/asm/segment.h | 59 ------------------------------------- arch/m68k/include/asm/thread_info.h | 3 -- arch/m68k/include/asm/tlbflush.h | 11 ++----- arch/m68k/include/asm/uaccess.h | 4 --- arch/m68k/kernel/asm-offsets.c | 2 +- arch/m68k/kernel/entry.S | 5 ++-- arch/m68k/kernel/process.c | 4 +-- arch/m68k/kernel/traps.c | 13 +++----- arch/m68k/mac/misc.c | 1 - arch/m68k/mm/cache.c | 6 ++-- arch/m68k/mm/init.c | 6 ---- arch/m68k/mm/kmap.c | 1 - arch/m68k/mm/memory.c | 1 - arch/m68k/mm/motorola.c | 2 +- arch/m68k/sun3/config.c | 3 +- arch/m68k/sun3/mmu_emu.c | 6 ++-- arch/m68k/sun3/sun3ints.c | 1 - arch/m68k/sun3x/prom.c | 1 - 22 files changed, 46 insertions(+), 117 deletions(-) delete mode 100644 arch/m68k/include/asm/segment.h diff --git a/arch/m68k/68000/entry.S b/arch/m68k/68000/entry.S index cce465e850fe..997b54933015 100644 --- a/arch/m68k/68000/entry.S +++ b/arch/m68k/68000/entry.S @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 774c35f47eea..0b50da08a9c5 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -29,7 +29,6 @@ config M68K select NO_DMA if !MMU && !COLDFIRE select OLD_SIGACTION select OLD_SIGSUSPEND3 - select SET_FS select UACCESS_MEMCPY if !MMU select VIRT_TO_BUS select ZONE_DMA diff --git a/arch/m68k/coldfire/entry.S b/arch/m68k/coldfire/entry.S index 68adb7b5b296..9f337c70243a 100644 --- a/arch/m68k/coldfire/entry.S +++ b/arch/m68k/coldfire/entry.S @@ -31,7 +31,6 @@ #include #include #include -#include #include #include diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h index 3750819ac5a1..f4d82c619a5c 100644 --- a/arch/m68k/include/asm/processor.h +++ b/arch/m68k/include/asm/processor.h @@ -9,7 +9,6 @@ #define __ASM_M68K_PROCESSOR_H #include -#include #include #include @@ -75,11 +74,37 @@ static inline void wrusp(unsigned long usp) #define TASK_UNMAPPED_BASE 0 #endif +/* Address spaces (or Function Codes in Motorola lingo) */ +#define USER_DATA 1 +#define USER_PROGRAM 2 +#define SUPER_DATA 5 +#define SUPER_PROGRAM 6 +#define CPU_SPACE 7 + +#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES +/* + * Set the SFC/DFC registers for special MM operations. For most normal + * operation these remain set to USER_DATA for the uaccess routines. + */ +static inline void set_fc(unsigned long val) +{ + WARN_ON_ONCE(in_interrupt()); + + __asm__ __volatile__ ("movec %0,%/sfc\n\t" + "movec %0,%/dfc\n\t" + : /* no outputs */ : "r" (val) : "memory"); +} +#else +static inline void set_fc(unsigned long val) +{ +} +#endif /* CONFIG_CPU_HAS_ADDRESS_SPACES */ + struct thread_struct { unsigned long ksp; /* kernel stack pointer */ unsigned long usp; /* user stack pointer */ unsigned short sr; /* saved status register */ - unsigned short fs; /* saved fs (sfc, dfc) */ + unsigned short fc; /* saved fc (sfc, dfc) */ unsigned long crp[2]; /* cpu root pointer */ unsigned long esp0; /* points to SR of stack frame */ unsigned long faddr; /* info about last fault */ @@ -92,7 +117,7 @@ struct thread_struct { #define INIT_THREAD { \ .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ .sr = PS_S, \ - .fs = __KERNEL_DS, \ + .fc = USER_DATA, \ } /* diff --git a/arch/m68k/include/asm/segment.h b/arch/m68k/include/asm/segment.h deleted file mode 100644 index 2b5e68a71ef7..000000000000 --- a/arch/m68k/include/asm/segment.h +++ /dev/null @@ -1,59 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _M68K_SEGMENT_H -#define _M68K_SEGMENT_H - -/* define constants */ -/* Address spaces (FC0-FC2) */ -#define USER_DATA (1) -#ifndef __USER_DS -#define __USER_DS (USER_DATA) -#endif -#define USER_PROGRAM (2) -#define SUPER_DATA (5) -#ifndef __KERNEL_DS -#define __KERNEL_DS (SUPER_DATA) -#endif -#define SUPER_PROGRAM (6) -#define CPU_SPACE (7) - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES -/* - * Get/set the SFC/DFC registers for MOVES instructions - */ -#define USER_DS MAKE_MM_SEG(__USER_DS) -#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) - -static inline mm_segment_t get_fs(void) -{ - mm_segment_t _v; - __asm__ ("movec %/dfc,%0":"=r" (_v.seg):); - return _v; -} - -static inline void set_fs(mm_segment_t val) -{ - __asm__ __volatile__ ("movec %0,%/sfc\n\t" - "movec %0,%/dfc\n\t" - : /* no outputs */ : "r" (val.seg) : "memory"); -} - -#else -#define USER_DS MAKE_MM_SEG(TASK_SIZE) -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) -#endif - -#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg) - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68K_SEGMENT_H */ diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h index 15a757073fa5..c952658ba792 100644 --- a/arch/m68k/include/asm/thread_info.h +++ b/arch/m68k/include/asm/thread_info.h @@ -4,7 +4,6 @@ #include #include -#include /* * On machines with 4k pages we default to an 8k thread size, though we @@ -27,7 +26,6 @@ struct thread_info { struct task_struct *task; /* main task structure */ unsigned long flags; - mm_segment_t addr_limit; /* thread address space */ int preempt_count; /* 0 => preemptable, <0 => BUG */ __u32 cpu; /* should always be 0 on m68k */ unsigned long tp_value; /* thread pointer */ @@ -37,7 +35,6 @@ struct thread_info { #define INIT_THREAD_INFO(tsk) \ { \ .task = &tsk, \ - .addr_limit = KERNEL_DS, \ .preempt_count = INIT_PREEMPT_COUNT, \ } diff --git a/arch/m68k/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush.h index a6318ccd308f..b882e2f4f551 100644 --- a/arch/m68k/include/asm/tlbflush.h +++ b/arch/m68k/include/asm/tlbflush.h @@ -13,13 +13,12 @@ static inline void flush_tlb_kernel_page(void *addr) if (CPU_IS_COLDFIRE) { mmu_write(MMUOR, MMUOR_CNL); } else if (CPU_IS_040_OR_060) { - mm_segment_t old_fs = get_fs(); - set_fs(KERNEL_DS); + set_fc(SUPER_DATA); __asm__ __volatile__(".chip 68040\n\t" "pflush (%0)\n\t" ".chip 68k" : : "a" (addr)); - set_fs(old_fs); + set_fc(USER_DATA); } else if (CPU_IS_020_OR_030) __asm__ __volatile__("pflush #4,#4,(%0)" : : "a" (addr)); } @@ -84,12 +83,8 @@ static inline void flush_tlb_mm(struct mm_struct *mm) static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) { - if (vma->vm_mm == current->active_mm) { - mm_segment_t old_fs = force_uaccess_begin(); - + if (vma->vm_mm == current->active_mm) __flush_tlb_one(addr); - force_uaccess_end(old_fs); - } } static inline void flush_tlb_range(struct vm_area_struct *vma, diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index 65581a7874d4..ba670523885c 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -9,7 +9,6 @@ */ #include #include -#include #include /* We let the MMU do all checking */ @@ -451,9 +450,6 @@ do { \ goto err_label; \ } while (0) -#define user_addr_max() \ - (uaccess_kernel() ? ~0UL : TASK_SIZE) - extern long strncpy_from_user(char *dst, const char __user *src, long count); extern __must_check long strnlen_user(const char __user *str, long n); diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c index ccea355052ef..906d73230537 100644 --- a/arch/m68k/kernel/asm-offsets.c +++ b/arch/m68k/kernel/asm-offsets.c @@ -31,7 +31,7 @@ int main(void) DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); DEFINE(THREAD_SR, offsetof(struct thread_struct, sr)); - DEFINE(THREAD_FS, offsetof(struct thread_struct, fs)); + DEFINE(THREAD_FC, offsetof(struct thread_struct, fc)); DEFINE(THREAD_CRP, offsetof(struct thread_struct, crp)); DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0)); DEFINE(THREAD_FPREG, offsetof(struct thread_struct, fp)); diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 8fa9822b5922..9434fca68de5 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -36,7 +36,6 @@ #include #include #include -#include #include #include #include @@ -337,7 +336,7 @@ resume: /* save fs (sfc,%dfc) (may be pointing to kernel memory) */ movec %sfc,%d0 - movew %d0,%a0@(TASK_THREAD+THREAD_FS) + movew %d0,%a0@(TASK_THREAD+THREAD_FC) /* save usp */ /* it is better to use a movel here instead of a movew 8*) */ @@ -423,7 +422,7 @@ resume: movel %a0,%usp /* restore fs (sfc,%dfc) */ - movew %a1@(TASK_THREAD+THREAD_FS),%a0 + movew %a1@(TASK_THREAD+THREAD_FC),%a0 movec %a0,%sfc movec %a0,%dfc diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c index db49f9091711..1ab692b952cd 100644 --- a/arch/m68k/kernel/process.c +++ b/arch/m68k/kernel/process.c @@ -92,7 +92,7 @@ void show_regs(struct pt_regs * regs) void flush_thread(void) { - current->thread.fs = __USER_DS; + current->thread.fc = USER_DATA; #ifdef CONFIG_FPU if (!FPU_IS_EMU) { unsigned long zero = 0; @@ -155,7 +155,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg, * Must save the current SFC/DFC value, NOT the value when * the parent was last descheduled - RGH 10-08-96 */ - p->thread.fs = get_fs().seg; + p->thread.fc = USER_DATA; if (unlikely(p->flags & (PF_KTHREAD | PF_IO_WORKER))) { /* kernel thread */ diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index 5b19fcdcd69e..9718ce94cc84 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -181,9 +181,8 @@ static inline void access_error060 (struct frame *fp) static inline unsigned long probe040(int iswrite, unsigned long addr, int wbs) { unsigned long mmusr; - mm_segment_t old_fs = get_fs(); - set_fs(MAKE_MM_SEG(wbs)); + set_fc(wbs); if (iswrite) asm volatile (".chip 68040; ptestw (%0); .chip 68k" : : "a" (addr)); @@ -192,7 +191,7 @@ static inline unsigned long probe040(int iswrite, unsigned long addr, int wbs) asm volatile (".chip 68040; movec %%mmusr,%0; .chip 68k" : "=r" (mmusr)); - set_fs(old_fs); + set_fc(USER_DATA); return mmusr; } @@ -201,10 +200,8 @@ static inline int do_040writeback1(unsigned short wbs, unsigned long wba, unsigned long wbd) { int res = 0; - mm_segment_t old_fs = get_fs(); - /* set_fs can not be moved, otherwise put_user() may oops */ - set_fs(MAKE_MM_SEG(wbs)); + set_fc(wbs); switch (wbs & WBSIZ_040) { case BA_SIZE_BYTE: @@ -218,9 +215,7 @@ static inline int do_040writeback1(unsigned short wbs, unsigned long wba, break; } - /* set_fs can not be moved, otherwise put_user() may oops */ - set_fs(old_fs); - + set_fc(USER_DATA); pr_debug("do_040writeback1, res=%d\n", res); diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c index 90f4e9ca1276..4fab34791758 100644 --- a/arch/m68k/mac/misc.c +++ b/arch/m68k/mac/misc.c @@ -18,7 +18,6 @@ #include #include -#include #include #include #include diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c index e7c1cabbfac4..dde978e66f14 100644 --- a/arch/m68k/mm/cache.c +++ b/arch/m68k/mm/cache.c @@ -90,11 +90,9 @@ void flush_icache_user_range(unsigned long address, unsigned long endaddr) void flush_icache_range(unsigned long address, unsigned long endaddr) { - mm_segment_t old_fs = get_fs(); - - set_fs(KERNEL_DS); + set_fc(SUPER_DATA); flush_icache_user_range(address, endaddr); - set_fs(old_fs); + set_fc(USER_DATA); } EXPORT_SYMBOL(flush_icache_range); diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c index 5d749e188246..1b47bec15832 100644 --- a/arch/m68k/mm/init.c +++ b/arch/m68k/mm/init.c @@ -72,12 +72,6 @@ void __init paging_init(void) if (!empty_zero_page) panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, PAGE_SIZE, PAGE_SIZE); - - /* - * Set up SFC/DFC registers (user data space). - */ - set_fs (USER_DS); - max_zone_pfn[ZONE_DMA] = end_mem >> PAGE_SHIFT; free_area_init(max_zone_pfn); } diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c index 1269d513b221..20ddf71b43d0 100644 --- a/arch/m68k/mm/kmap.c +++ b/arch/m68k/mm/kmap.c @@ -17,7 +17,6 @@ #include #include -#include #include #include #include diff --git a/arch/m68k/mm/memory.c b/arch/m68k/mm/memory.c index fe75aecfb238..c2c03b0a1567 100644 --- a/arch/m68k/mm/memory.c +++ b/arch/m68k/mm/memory.c @@ -15,7 +15,6 @@ #include #include -#include #include #include #include diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c index 3a653f0a4188..9f3f77785aa7 100644 --- a/arch/m68k/mm/motorola.c +++ b/arch/m68k/mm/motorola.c @@ -467,7 +467,7 @@ void __init paging_init(void) /* * Set up SFC/DFC registers */ - set_fs(KERNEL_DS); + set_fc(USER_DATA); #ifdef DEBUG printk ("before free_area_init\n"); diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c index f7dd47232b6c..203f428a0344 100644 --- a/arch/m68k/sun3/config.c +++ b/arch/m68k/sun3/config.c @@ -31,7 +31,6 @@ #include #include #include -#include #include char sun3_reserved_pmeg[SUN3_PMEGS_NUM]; @@ -89,7 +88,7 @@ void __init sun3_init(void) sun3_reserved_pmeg[249] = 1; sun3_reserved_pmeg[252] = 1; sun3_reserved_pmeg[253] = 1; - set_fs(KERNEL_DS); + set_fc(USER_DATA); } /* Without this, Bad Things happen when something calls arch_reset. */ diff --git a/arch/m68k/sun3/mmu_emu.c b/arch/m68k/sun3/mmu_emu.c index 7aa879b7c7ff..7ec20817c0c9 100644 --- a/arch/m68k/sun3/mmu_emu.c +++ b/arch/m68k/sun3/mmu_emu.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -191,14 +190,13 @@ void __init mmu_emu_init(unsigned long bootmem_end) for(seg = 0; seg < PAGE_OFFSET; seg += SUN3_PMEG_SIZE) sun3_put_segmap(seg, SUN3_INVALID_PMEG); - set_fs(MAKE_MM_SEG(3)); + set_fc(3); for(seg = 0; seg < 0x10000000; seg += SUN3_PMEG_SIZE) { i = sun3_get_segmap(seg); for(j = 1; j < CONTEXTS_NUM; j++) (*(romvec->pv_setctxt))(j, (void *)seg, i); } - set_fs(KERNEL_DS); - + set_fc(USER_DATA); } /* erase the mappings for a dead context. Uses the pg_dir for hints diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 41ae422119d3..36cc280a4505 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/m68k/sun3x/prom.c b/arch/m68k/sun3x/prom.c index 74d2fe57524b..64c23bfaa90c 100644 --- a/arch/m68k/sun3x/prom.c +++ b/arch/m68k/sun3x/prom.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include -- cgit From 14351f08ed5c8b888cdd95651152db7e096ee27f Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Thu, 16 Sep 2021 12:05:28 -0300 Subject: RDMA/hns: Work around broken constant propagation in gcc 8 gcc 8.3 and 5.4 throw this: In function 'modify_qp_init_to_rtr', ././include/linux/compiler_types.h:322:38: error: call to '__compiletime_assert_1859' declared with attribute error: FIELD_PREP: value too large for the field _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) [..] drivers/infiniband/hw/hns/hns_roce_common.h:91:52: note: in expansion of macro 'FIELD_PREP' *((__le32 *)ptr + (field_h) / 32) |= cpu_to_le32(FIELD_PREP( \ ^~~~~~~~~~ drivers/infiniband/hw/hns/hns_roce_common.h:95:39: note: in expansion of macro '_hr_reg_write' #define hr_reg_write(ptr, field, val) _hr_reg_write(ptr, field, val) ^~~~~~~~~~~~~ drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4412:2: note: in expansion of macro 'hr_reg_write' hr_reg_write(context, QPC_LP_PKTN_INI, lp_pktn_ini); Because gcc has miscalculated the constantness of lp_pktn_ini: mtu = ib_mtu_enum_to_int(ib_mtu); if (WARN_ON(mtu < 0)) [..] lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu); Since mtu is limited to {256,512,1024,2048,4096} lp_pktn_ini is between 4 and 8 which is compatible with the 4 bit field in the FIELD_PREP. Work around this broken compiler by adding a 'can never be true' constraint on lp_pktn_ini's value which clears out the problem. Fixes: f0cb411aad23 ("RDMA/hns: Use new interface to modify QP context") Link: https://lore.kernel.org/r/0-v1-c773ecb137bc+11f-hns_gcc8_jgg@nvidia.com Reported-by: Geert Uytterhoeven Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index 5b9953105752..a9c00a2e8ebd 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -4397,7 +4397,12 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp, hr_qp->path_mtu = ib_mtu; mtu = ib_mtu_enum_to_int(ib_mtu); - if (WARN_ON(mtu < 0)) + if (WARN_ON(mtu <= 0)) + return -EINVAL; +#define MAX_LP_MSG_LEN 65536 + /* MTU * (2 ^ LP_PKTN_INI) shouldn't be bigger than 64KB */ + lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu); + if (WARN_ON(lp_pktn_ini >= 0xF)) return -EINVAL; if (attr_mask & IB_QP_PATH_MTU) { @@ -4405,10 +4410,6 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp, hr_reg_clear(qpc_mask, QPC_MTU); } -#define MAX_LP_MSG_LEN 65536 - /* MTU * (2 ^ LP_PKTN_INI) shouldn't be bigger than 64KB */ - lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu); - hr_reg_write(context, QPC_LP_PKTN_INI, lp_pktn_ini); hr_reg_clear(qpc_mask, QPC_LP_PKTN_INI); -- cgit From 2938b2978a70d4cc10777ee71c9e512ffe4e0f4b Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Fri, 24 Sep 2021 12:30:09 +0300 Subject: hwmon: (tmp421) handle I2C errors Function i2c_smbus_read_byte_data() can return a negative error number instead of the data read if I2C transaction failed for whatever reason. Lack of error checking can lead to serious issues on production hardware, e.g. errors treated as temperatures produce spurious critical temperature-crossed-threshold errors in BMC logs for OCP server hardware. The patch was tested with Mellanox OCP Mezzanine card emulating TMP421 protocol for temperature sensing which sometimes leads to I2C protocol error during early boot up stage. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Cc: stable@vger.kernel.org Signed-off-by: Paul Fertser Link: https://lore.kernel.org/r/20210924093011.26083-1-fercerpav@gmail.com [groeck: dropped unnecessary line breaks] Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp421.c | 38 ++++++++++++++++++++++++++++---------- 1 file changed, 28 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index ede66ea6a730..8fd8c3a94dfe 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -119,38 +119,56 @@ static int temp_from_u16(u16 reg) return (temp * 1000 + 128) / 256; } -static struct tmp421_data *tmp421_update_device(struct device *dev) +static int tmp421_update_device(struct tmp421_data *data) { - struct tmp421_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; + int ret = 0; int i; mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + (HZ / 2)) || !data->valid) { - data->config = i2c_smbus_read_byte_data(client, - TMP421_CONFIG_REG_1); + ret = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_1); + if (ret < 0) + goto exit; + data->config = ret; for (i = 0; i < data->channels; i++) { - data->temp[i] = i2c_smbus_read_byte_data(client, - TMP421_TEMP_MSB[i]) << 8; - data->temp[i] |= i2c_smbus_read_byte_data(client, - TMP421_TEMP_LSB[i]); + ret = i2c_smbus_read_byte_data(client, TMP421_TEMP_MSB[i]); + if (ret < 0) + goto exit; + data->temp[i] = ret << 8; + + ret = i2c_smbus_read_byte_data(client, TMP421_TEMP_LSB[i]); + if (ret < 0) + goto exit; + data->temp[i] |= ret; } data->last_updated = jiffies; data->valid = 1; } +exit: mutex_unlock(&data->update_lock); - return data; + if (ret < 0) { + data->valid = 0; + return ret; + } + + return 0; } static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) { - struct tmp421_data *tmp421 = tmp421_update_device(dev); + struct tmp421_data *tmp421 = dev_get_drvdata(dev); + int ret = 0; + + ret = tmp421_update_device(tmp421); + if (ret) + return ret; switch (attr) { case hwmon_temp_input: -- cgit From 540effa7f283d25bcc13c0940d808002fee340b8 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Fri, 24 Sep 2021 12:30:10 +0300 Subject: hwmon: (tmp421) report /PVLD condition as fault For both local and remote sensors all the supported ICs can report an "undervoltage lockout" condition which means the conversion wasn't properly performed due to insufficient power supply voltage and so the measurement results can't be trusted. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser Link: https://lore.kernel.org/r/20210924093011.26083-2-fercerpav@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp421.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index 8fd8c3a94dfe..c9ef83627bb7 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -179,10 +179,10 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, return 0; case hwmon_temp_fault: /* - * The OPEN bit signals a fault. This is bit 0 of the temperature - * register (low byte). + * Any of OPEN or /PVLD bits indicate a hardware mulfunction + * and the conversion result may be incorrect */ - *val = tmp421->temp[channel] & 0x01; + *val = !!(tmp421->temp[channel] & 0x03); return 0; default: return -EOPNOTSUPP; @@ -195,9 +195,6 @@ static umode_t tmp421_is_visible(const void *data, enum hwmon_sensor_types type, { switch (attr) { case hwmon_temp_fault: - if (channel == 0) - return 0; - return 0444; case hwmon_temp_input: return 0444; default: -- cgit From 724e8af85854c4d3401313b6dd7d79cf792d8990 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Fri, 24 Sep 2021 12:30:11 +0300 Subject: hwmon: (tmp421) fix rounding for negative values Old code produces -24999 for 0b1110011100000000 input in standard format due to always rounding up rather than "away from zero". Use the common macro for division, unify and simplify the conversion code along the way. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser Link: https://lore.kernel.org/r/20210924093011.26083-3-fercerpav@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/tmp421.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index c9ef83627bb7..b963a369c5ab 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -100,23 +100,17 @@ struct tmp421_data { s16 temp[4]; }; -static int temp_from_s16(s16 reg) +static int temp_from_raw(u16 reg, bool extended) { /* Mask out status bits */ int temp = reg & ~0xf; - return (temp * 1000 + 128) / 256; -} - -static int temp_from_u16(u16 reg) -{ - /* Mask out status bits */ - int temp = reg & ~0xf; - - /* Add offset for extended temperature range. */ - temp -= 64 * 256; + if (extended) + temp = temp - 64 * 256; + else + temp = (s16)temp; - return (temp * 1000 + 128) / 256; + return DIV_ROUND_CLOSEST(temp * 1000, 256); } static int tmp421_update_device(struct tmp421_data *data) @@ -172,10 +166,8 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, switch (attr) { case hwmon_temp_input: - if (tmp421->config & TMP421_CONFIG_RANGE) - *val = temp_from_u16(tmp421->temp[channel]); - else - *val = temp_from_s16(tmp421->temp[channel]); + *val = temp_from_raw(tmp421->temp[channel], + tmp421->config & TMP421_CONFIG_RANGE); return 0; case hwmon_temp_fault: /* -- cgit From 6f7d70467121f790b36af2d84bc02b5c236bf5e6 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 23 Sep 2021 22:11:13 +0200 Subject: hwmon: (ltc2947) Properly handle errors when looking for the external clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The return value of devm_clk_get should in general be propagated to upper layer. In this case the clk is optional, use the appropriate wrapper instead of interpreting all errors as "The optional clk is not available". Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20210923201113.398932-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck --- drivers/hwmon/ltc2947-core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/ltc2947-core.c b/drivers/hwmon/ltc2947-core.c index bb3f7749a0b0..5423466de697 100644 --- a/drivers/hwmon/ltc2947-core.c +++ b/drivers/hwmon/ltc2947-core.c @@ -989,8 +989,12 @@ static int ltc2947_setup(struct ltc2947_data *st) return ret; /* check external clock presence */ - extclk = devm_clk_get(st->dev, NULL); - if (!IS_ERR(extclk)) { + extclk = devm_clk_get_optional(st->dev, NULL); + if (IS_ERR(extclk)) + return dev_err_probe(st->dev, PTR_ERR(extclk), + "Failed to get external clock\n"); + + if (extclk) { unsigned long rate_hz; u8 pre = 0, div, tbctl; u64 aux; -- cgit From 325fd36ae76a6d089983b2d2eccb41237d35b221 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 23 Sep 2021 16:23:33 +0300 Subject: net: enetc: fix the incorrect clearing of IF_MODE bits The enetc phylink .mac_config handler intends to clear the IFMODE field (bits 1:0) of the PM0_IF_MODE register, but incorrectly clears all the other fields instead. For normal operation, the bug was inconsequential, due to the fact that we write the PM0_IF_MODE register in two stages, first in phylink .mac_config (which incorrectly cleared out a bunch of stuff), then we update the speed and duplex to the correct values in phylink .mac_link_up. Judging by the code (not tested), it looks like maybe loopback mode was broken, since this is one of the settings in PM0_IF_MODE which is incorrectly cleared. Fixes: c76a97218dcb ("net: enetc: force the RGMII speed and duplex instead of operating in inband mode") Reported-by: Pavel Machek (CIP) Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 60d94e0a07d6..4c977dfc44f0 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -541,8 +541,7 @@ static void enetc_mac_config(struct enetc_hw *hw, phy_interface_t phy_mode) if (phy_interface_mode_is_rgmii(phy_mode)) { val = enetc_port_rd(hw, ENETC_PM0_IF_MODE); - val &= ~ENETC_PM0_IFM_EN_AUTO; - val &= ENETC_PM0_IFM_IFMODE_MASK; + val &= ~(ENETC_PM0_IFM_EN_AUTO | ENETC_PM0_IFM_IFMODE_MASK); val |= ENETC_PM0_IFM_IFMODE_GMII | ENETC_PM0_IFM_RG; enetc_port_wr(hw, ENETC_PM0_IF_MODE, val); } -- cgit From 597aa16c782496bf74c5dc3b45ff472ade6cee64 Mon Sep 17 00:00:00 2001 From: Xiao Liang Date: Thu, 23 Sep 2021 23:03:19 +0800 Subject: net: ipv4: Fix rtnexthop len when RTA_FLOW is present Multipath RTA_FLOW is embedded in nexthop. Dump it in fib_add_nexthop() to get the length of rtnexthop correct. Fixes: b0f60193632e ("ipv4: Refactor nexthop attributes in fib_dump_info") Signed-off-by: Xiao Liang Reviewed-by: David Ahern Signed-off-by: David S. Miller --- include/net/ip_fib.h | 2 +- include/net/nexthop.h | 2 +- net/ipv4/fib_semantics.c | 16 +++++++++------- net/ipv6/route.c | 5 +++-- 4 files changed, 14 insertions(+), 11 deletions(-) diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index 21c5386d4a6d..ab5348e57db1 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -597,5 +597,5 @@ int ip_valid_fib_dump_req(struct net *net, const struct nlmsghdr *nlh, int fib_nexthop_info(struct sk_buff *skb, const struct fib_nh_common *nh, u8 rt_family, unsigned char *flags, bool skip_oif); int fib_add_nexthop(struct sk_buff *skb, const struct fib_nh_common *nh, - int nh_weight, u8 rt_family); + int nh_weight, u8 rt_family, u32 nh_tclassid); #endif /* _NET_FIB_H */ diff --git a/include/net/nexthop.h b/include/net/nexthop.h index 10e1777877e6..28085b995ddc 100644 --- a/include/net/nexthop.h +++ b/include/net/nexthop.h @@ -325,7 +325,7 @@ int nexthop_mpath_fill_node(struct sk_buff *skb, struct nexthop *nh, struct fib_nh_common *nhc = &nhi->fib_nhc; int weight = nhg->nh_entries[i].weight; - if (fib_add_nexthop(skb, nhc, weight, rt_family) < 0) + if (fib_add_nexthop(skb, nhc, weight, rt_family, 0) < 0) return -EMSGSIZE; } diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index b42c429cebbe..3364cb9c67e0 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -1661,7 +1661,7 @@ EXPORT_SYMBOL_GPL(fib_nexthop_info); #if IS_ENABLED(CONFIG_IP_ROUTE_MULTIPATH) || IS_ENABLED(CONFIG_IPV6) int fib_add_nexthop(struct sk_buff *skb, const struct fib_nh_common *nhc, - int nh_weight, u8 rt_family) + int nh_weight, u8 rt_family, u32 nh_tclassid) { const struct net_device *dev = nhc->nhc_dev; struct rtnexthop *rtnh; @@ -1679,6 +1679,9 @@ int fib_add_nexthop(struct sk_buff *skb, const struct fib_nh_common *nhc, rtnh->rtnh_flags = flags; + if (nh_tclassid && nla_put_u32(skb, RTA_FLOW, nh_tclassid)) + goto nla_put_failure; + /* length of rtnetlink header + attributes */ rtnh->rtnh_len = nlmsg_get_pos(skb) - (void *)rtnh; @@ -1706,14 +1709,13 @@ static int fib_add_multipath(struct sk_buff *skb, struct fib_info *fi) } for_nexthops(fi) { - if (fib_add_nexthop(skb, &nh->nh_common, nh->fib_nh_weight, - AF_INET) < 0) - goto nla_put_failure; + u32 nh_tclassid = 0; #ifdef CONFIG_IP_ROUTE_CLASSID - if (nh->nh_tclassid && - nla_put_u32(skb, RTA_FLOW, nh->nh_tclassid)) - goto nla_put_failure; + nh_tclassid = nh->nh_tclassid; #endif + if (fib_add_nexthop(skb, &nh->nh_common, nh->fib_nh_weight, + AF_INET, nh_tclassid) < 0) + goto nla_put_failure; } endfor_nexthops(fi); mp_end: diff --git a/net/ipv6/route.c b/net/ipv6/route.c index dbc224023977..9b9ef09382ab 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -5681,14 +5681,15 @@ static int rt6_fill_node(struct net *net, struct sk_buff *skb, goto nla_put_failure; if (fib_add_nexthop(skb, &rt->fib6_nh->nh_common, - rt->fib6_nh->fib_nh_weight, AF_INET6) < 0) + rt->fib6_nh->fib_nh_weight, AF_INET6, + 0) < 0) goto nla_put_failure; list_for_each_entry_safe(sibling, next_sibling, &rt->fib6_siblings, fib6_siblings) { if (fib_add_nexthop(skb, &sibling->fib6_nh->nh_common, sibling->fib6_nh->fib_nh_weight, - AF_INET6) < 0) + AF_INET6, 0) < 0) goto nla_put_failure; } -- cgit From 5ab8a447bcfee1ded709e7ff5dc7608ca9f66ae2 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 24 Sep 2021 01:00:16 +0300 Subject: smsc95xx: fix stalled rx after link change After commit 05b35e7eb9a1 ("smsc95xx: add phylib support"), link changes are no longer propagated to usbnet. As a result, rx URB allocation won't happen until there is a packet sent out first (this might never happen, e.g. running just ssh server with a static IP). Fix by triggering usbnet EVENT_LINK_CHANGE. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Aaro Koskinen Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 7d953974eb9b..26b1bd8e845b 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1178,7 +1178,10 @@ static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf) static void smsc95xx_handle_link_change(struct net_device *net) { + struct usbnet *dev = netdev_priv(net); + phy_print_status(net->phydev); + usbnet_defer_kevent(dev, EVENT_LINK_CHANGE); } static int smsc95xx_start_phy(struct usbnet *dev) -- cgit From 4526fe74c3c5095cc55931a3a6fb4932f9e06002 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Fri, 24 Sep 2021 11:26:52 +0200 Subject: drivers: net: mhi: fix error path in mhi_net_newlink Fix double free_netdev when mhi_prepare_for_transfer fails. Fixes: 3ffec6a14f24 ("net: Add mhi-net driver") Signed-off-by: Daniele Palmas Reviewed-by: Manivannan Sadhasivam Reviewed-by: Loic Poulain Signed-off-by: David S. Miller --- drivers/net/mhi_net.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/mhi_net.c b/drivers/net/mhi_net.c index d127eb6e9257..aaa628f859fd 100644 --- a/drivers/net/mhi_net.c +++ b/drivers/net/mhi_net.c @@ -321,7 +321,7 @@ static int mhi_net_newlink(struct mhi_device *mhi_dev, struct net_device *ndev) /* Start MHI channels */ err = mhi_prepare_for_transfer(mhi_dev); if (err) - goto out_err; + return err; /* Number of transfer descriptors determines size of the queue */ mhi_netdev->rx_queue_sz = mhi_get_free_desc_count(mhi_dev, DMA_FROM_DEVICE); @@ -331,10 +331,6 @@ static int mhi_net_newlink(struct mhi_device *mhi_dev, struct net_device *ndev) return err; return 0; - -out_err: - free_netdev(ndev); - return err; } static void mhi_net_dellink(struct mhi_device *mhi_dev, struct net_device *ndev) -- cgit From adfc8f9d2f9fefd880abc82cfbf62cbfe6539c97 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 23 Sep 2021 17:29:39 -0700 Subject: NIOS2: fix kconfig unmet dependency warning for SERIAL_CORE_CONSOLE SERIAL_CORE_CONSOLE depends on TTY so EARLY_PRINTK should also depend on TTY so that it does not select SERIAL_CORE_CONSOLE inadvertently. WARNING: unmet direct dependencies detected for SERIAL_CORE_CONSOLE Depends on [n]: TTY [=n] && HAS_IOMEM [=y] Selected by [y]: - EARLY_PRINTK [=y] Fixes: e8bf5bc776ed ("nios2: add early printk support") Signed-off-by: Randy Dunlap Cc: Dinh Nguyen Signed-off-by: Dinh Nguyen --- arch/nios2/Kconfig.debug | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/nios2/Kconfig.debug b/arch/nios2/Kconfig.debug index a8bc06e96ef5..ca1beb87f987 100644 --- a/arch/nios2/Kconfig.debug +++ b/arch/nios2/Kconfig.debug @@ -3,9 +3,10 @@ config EARLY_PRINTK bool "Activate early kernel debugging" default y + depends on TTY select SERIAL_CORE_CONSOLE help - Enable early printk on console + Enable early printk on console. This is useful for kernel debugging when your machine crashes very early before the console code is initialized. You should normally say N here, unless you want to debug such a crash. -- cgit From a86cd017a40a66b1a3db005bfee4e76a1ae9a432 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Mon, 13 Sep 2021 11:04:42 +0300 Subject: RDMA/usnic: Lock VF with mutex instead of spinlock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Usnic VF doesn't need lock in atomic context to create QPs, so it is safe to use mutex instead of spinlock. Such change fixes the following smatch error. Smatch static checker warning: lib/kobject.c:289 kobject_set_name_vargs() warn: sleeping in atomic context Fixes: 514aee660df4 ("RDMA: Globally allocate and release QP memory") Link: https://lore.kernel.org/r/2a0e295786c127e518ebee8bb7cafcb819a625f6.1631520231.git.leonro@nvidia.com Reported-by: Dan Carpenter Signed-off-by: Leon Romanovsky Reviewed-by: Håkon Bugge Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/usnic/usnic_ib.h | 2 +- drivers/infiniband/hw/usnic/usnic_ib_main.c | 2 +- drivers/infiniband/hw/usnic/usnic_ib_verbs.c | 16 ++++++++-------- 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/hw/usnic/usnic_ib.h b/drivers/infiniband/hw/usnic/usnic_ib.h index 84dd682d2334..b350081aeb5a 100644 --- a/drivers/infiniband/hw/usnic/usnic_ib.h +++ b/drivers/infiniband/hw/usnic/usnic_ib.h @@ -90,7 +90,7 @@ struct usnic_ib_dev { struct usnic_ib_vf { struct usnic_ib_dev *pf; - spinlock_t lock; + struct mutex lock; struct usnic_vnic *vnic; unsigned int qp_grp_ref_cnt; struct usnic_ib_pd *pd; diff --git a/drivers/infiniband/hw/usnic/usnic_ib_main.c b/drivers/infiniband/hw/usnic/usnic_ib_main.c index 228e9a36dad0..d346dd48e731 100644 --- a/drivers/infiniband/hw/usnic/usnic_ib_main.c +++ b/drivers/infiniband/hw/usnic/usnic_ib_main.c @@ -572,7 +572,7 @@ static int usnic_ib_pci_probe(struct pci_dev *pdev, } vf->pf = pf; - spin_lock_init(&vf->lock); + mutex_init(&vf->lock); mutex_lock(&pf->usdev_lock); list_add_tail(&vf->link, &pf->vf_dev_list); /* diff --git a/drivers/infiniband/hw/usnic/usnic_ib_verbs.c b/drivers/infiniband/hw/usnic/usnic_ib_verbs.c index 06a4e9d4545d..756a83bcff58 100644 --- a/drivers/infiniband/hw/usnic/usnic_ib_verbs.c +++ b/drivers/infiniband/hw/usnic/usnic_ib_verbs.c @@ -196,7 +196,7 @@ find_free_vf_and_create_qp_grp(struct ib_qp *qp, for (i = 0; dev_list[i]; i++) { dev = dev_list[i]; vf = dev_get_drvdata(dev); - spin_lock(&vf->lock); + mutex_lock(&vf->lock); vnic = vf->vnic; if (!usnic_vnic_check_room(vnic, res_spec)) { usnic_dbg("Found used vnic %s from %s\n", @@ -208,10 +208,10 @@ find_free_vf_and_create_qp_grp(struct ib_qp *qp, vf, pd, res_spec, trans_spec); - spin_unlock(&vf->lock); + mutex_unlock(&vf->lock); goto qp_grp_check; } - spin_unlock(&vf->lock); + mutex_unlock(&vf->lock); } usnic_uiom_free_dev_list(dev_list); @@ -220,7 +220,7 @@ find_free_vf_and_create_qp_grp(struct ib_qp *qp, /* Try to find resources on an unused vf */ list_for_each_entry(vf, &us_ibdev->vf_dev_list, link) { - spin_lock(&vf->lock); + mutex_lock(&vf->lock); vnic = vf->vnic; if (vf->qp_grp_ref_cnt == 0 && usnic_vnic_check_room(vnic, res_spec) == 0) { @@ -228,10 +228,10 @@ find_free_vf_and_create_qp_grp(struct ib_qp *qp, vf, pd, res_spec, trans_spec); - spin_unlock(&vf->lock); + mutex_unlock(&vf->lock); goto qp_grp_check; } - spin_unlock(&vf->lock); + mutex_unlock(&vf->lock); } usnic_info("No free qp grp found on %s\n", @@ -253,9 +253,9 @@ static void qp_grp_destroy(struct usnic_ib_qp_grp *qp_grp) WARN_ON(qp_grp->state != IB_QPS_RESET); - spin_lock(&vf->lock); + mutex_lock(&vf->lock); usnic_ib_qp_grp_destroy(qp_grp); - spin_unlock(&vf->lock); + mutex_unlock(&vf->lock); } static int create_qp_validate_user_data(struct usnic_ib_create_qp_cmd cmd) -- cgit From 42de956ca7e5f6c47048dde640f797e783b23198 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 21 Sep 2021 09:11:59 -0300 Subject: vfio/ap_ops: Add missed vfio_uninit_group_dev() Without this call an xarray entry is leaked when the vfio_ap device is unprobed. It was missed when the below patch was rebased across the dev_set patch. Keep the remove function in the same order as the error unwind in probe. Fixes: eb0feefd4c02 ("vfio/ap_ops: Convert to use vfio_register_group_dev()") Reviewed-by: Christoph Hellwig Tested-by: Tony Krowiak Signed-off-by: Jason Gunthorpe Reviewed-by: Tony Krowiak Link: https://lore.kernel.org/r/0-v3-f9b50340cdbb+e4-ap_uninit_jgg@nvidia.com Signed-off-by: Alex Williamson --- drivers/s390/crypto/vfio_ap_ops.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c index 118939a7729a..623d5269a52c 100644 --- a/drivers/s390/crypto/vfio_ap_ops.c +++ b/drivers/s390/crypto/vfio_ap_ops.c @@ -361,6 +361,7 @@ err_list: mutex_lock(&matrix_dev->lock); list_del(&matrix_mdev->node); mutex_unlock(&matrix_dev->lock); + vfio_uninit_group_dev(&matrix_mdev->vdev); kfree(matrix_mdev); err_dec_available: atomic_inc(&matrix_dev->available_instances); @@ -376,9 +377,10 @@ static void vfio_ap_mdev_remove(struct mdev_device *mdev) mutex_lock(&matrix_dev->lock); vfio_ap_mdev_reset_queues(matrix_mdev); list_del(&matrix_mdev->node); + mutex_unlock(&matrix_dev->lock); + vfio_uninit_group_dev(&matrix_mdev->vdev); kfree(matrix_mdev); atomic_inc(&matrix_dev->available_instances); - mutex_unlock(&matrix_dev->lock); } static ssize_t name_show(struct mdev_type *mtype, -- cgit From 87c1696655787895689618c8b63c5efe66b8f2ab Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 21 Sep 2021 08:24:57 -0600 Subject: io-wq: ensure we exit if thread group is exiting Dave reports that a coredumping workload gets stuck in 5.15-rc2, and identified the culprit in the Fixes line below. The problem is that relying solely on fatal_signal_pending() to gate whether to exit or not fails miserably if a process gets eg SIGILL sent. Don't exclusively rely on fatal signals, also check if the thread group is exiting. Fixes: 15e20db2e0ce ("io-wq: only exit on fatal signals") Reported-by: Dave Chinner Signed-off-by: Jens Axboe --- fs/io-wq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/io-wq.c b/fs/io-wq.c index c2e0e8e80949..c2360cdc403d 100644 --- a/fs/io-wq.c +++ b/fs/io-wq.c @@ -584,7 +584,8 @@ loop: if (!get_signal(&ksig)) continue; - if (fatal_signal_pending(current)) + if (fatal_signal_pending(current) || + signal_group_exit(current->signal)) break; continue; } -- cgit From bd99c71bd14072ce2920f6d0c2fe43df072c653c Mon Sep 17 00:00:00 2001 From: Hao Xu Date: Wed, 22 Sep 2021 18:12:36 +0800 Subject: io_uring: fix race between poll completion and cancel_hash insertion If poll arming and poll completion runs in parallel, there maybe races. For instance, run io_poll_add in iowq and io_poll_task_func in original context, then: iowq original context io_poll_add vfs_poll (interruption happens tw queued to original context) io_poll_task_func generate cqe del from cancel_hash[] if !poll.done insert to cancel_hash[] The entry left in cancel_hash[], similar case for fast poll. Fix it by set poll.done = true when del from cancel_hash[]. Fixes: 5082620fb2ca ("io_uring: terminate multishot poll for CQ ring overflow") Signed-off-by: Hao Xu Link: https://lore.kernel.org/r/20210922101238.7177-2-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index e372d5b9f6dc..43530aae6180 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -5337,10 +5337,8 @@ static bool __io_poll_complete(struct io_kiocb *req, __poll_t mask) } if (req->poll.events & EPOLLONESHOT) flags = 0; - if (!io_cqring_fill_event(ctx, req->user_data, error, flags)) { - req->poll.done = true; + if (!io_cqring_fill_event(ctx, req->user_data, error, flags)) flags = 0; - } if (flags & IORING_CQE_F_MORE) ctx->cq_extra++; @@ -5371,6 +5369,7 @@ static void io_poll_task_func(struct io_kiocb *req, bool *locked) if (done) { io_poll_remove_double(req); hash_del(&req->hash_node); + req->poll.done = true; } else { req->result = 0; add_wait_queue(req->poll.head, &req->poll.wait); @@ -5508,6 +5507,7 @@ static void io_async_task_func(struct io_kiocb *req, bool *locked) hash_del(&req->hash_node); io_poll_remove_double(req); + apoll->poll.done = true; spin_unlock(&ctx->completion_lock); if (!READ_ONCE(apoll->poll.canceled)) -- cgit From a62682f92eedb41c1cd8290fa875a4b85624fb9a Mon Sep 17 00:00:00 2001 From: Hao Xu Date: Wed, 22 Sep 2021 18:12:37 +0800 Subject: io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow We should set EPOLLONESHOT if cqring_fill_event() returns false since io_poll_add() decides to put req or not by it. Fixes: 5082620fb2ca ("io_uring: terminate multishot poll for CQ ring overflow") Signed-off-by: Hao Xu Link: https://lore.kernel.org/r/20210922101238.7177-3-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 43530aae6180..ac0c06d5c629 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -5337,8 +5337,10 @@ static bool __io_poll_complete(struct io_kiocb *req, __poll_t mask) } if (req->poll.events & EPOLLONESHOT) flags = 0; - if (!io_cqring_fill_event(ctx, req->user_data, error, flags)) + if (!io_cqring_fill_event(ctx, req->user_data, error, flags)) { + req->poll.events |= EPOLLONESHOT; flags = 0; + } if (flags & IORING_CQE_F_MORE) ctx->cq_extra++; -- cgit From 5b7aa38d86f348847a48f71e9ac7715406de900e Mon Sep 17 00:00:00 2001 From: Hao Xu Date: Wed, 22 Sep 2021 18:12:38 +0800 Subject: io_uring: fix potential req refcount underflow For multishot mode, there may be cases like: iowq original context io_poll_add _arm_poll() mask = vfs_poll() is not 0 if mask (2) io_poll_complete() compl_unlock (interruption happens tw queued to original context) io_poll_task_func() compl_lock (3) done = io_poll_complete() is true compl_unlock put req ref (1) if (poll->flags & EPOLLONESHOT) put req ref EPOLLONESHOT flag in (1) may be from (2) or (3), so there are multiple combinations that can cause ref underfow. Let's address it by: - check the return value in (2) as done - change (1) to if (done) in this way, we only do ref put in (1) if 'oneshot flag' is from (2) - do poll.done check in io_poll_task_func(), so that we won't put ref for the second time. Signed-off-by: Hao Xu Link: https://lore.kernel.org/r/20210922101238.7177-4-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index ac0c06d5c629..7707cdb7b372 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -5367,6 +5367,10 @@ static void io_poll_task_func(struct io_kiocb *req, bool *locked) } else { bool done; + if (req->poll.done) { + spin_unlock(&ctx->completion_lock); + return; + } done = __io_poll_complete(req, req->result); if (done) { io_poll_remove_double(req); @@ -5830,6 +5834,7 @@ static int io_poll_add(struct io_kiocb *req, unsigned int issue_flags) struct io_ring_ctx *ctx = req->ctx; struct io_poll_table ipt; __poll_t mask; + bool done; ipt.pt._qproc = io_poll_queue_proc; @@ -5838,13 +5843,13 @@ static int io_poll_add(struct io_kiocb *req, unsigned int issue_flags) if (mask) { /* no async, we'd stolen it */ ipt.error = 0; - io_poll_complete(req, mask); + done = io_poll_complete(req, mask); } spin_unlock(&ctx->completion_lock); if (mask) { io_cqring_ev_posted(ctx); - if (poll->events & EPOLLONESHOT) + if (done) io_put_req(req); } return ipt.error; -- cgit From 8bab4c09f24ec8d4a7a78ab343620f89d3a24804 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 24 Sep 2021 07:12:27 -0600 Subject: io_uring: allow conditional reschedule for intensive iterators If we have a lot of threads and rings, the tctx list can get quite big. This is especially true if we keep creating new threads and rings. Likewise for the provided buffers list. Be nice and insert a conditional reschedule point while iterating the nodes for deletion. Link: https://lore.kernel.org/io-uring/00000000000064b6b405ccb41113@google.com/ Reported-by: syzbot+111d2a03f51f5ae73775@syzkaller.appspotmail.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 7707cdb7b372..ef3c94a55fbd 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -9173,8 +9173,10 @@ static void io_destroy_buffers(struct io_ring_ctx *ctx) struct io_buffer *buf; unsigned long index; - xa_for_each(&ctx->io_buffers, index, buf) + xa_for_each(&ctx->io_buffers, index, buf) { __io_remove_buffers(ctx, buf, index, -1U); + cond_resched(); + } } static void io_req_cache_free(struct list_head *list) @@ -9672,8 +9674,10 @@ static void io_uring_clean_tctx(struct io_uring_task *tctx) struct io_tctx_node *node; unsigned long index; - xa_for_each(&tctx->xa, index, node) + xa_for_each(&tctx->xa, index, node) { io_uring_del_tctx_node(index); + cond_resched(); + } if (wq) { /* * Must be after io_uring_del_task_file() (removes nodes under -- cgit From 9990da93d2bf9892c2c14c958bef050d4e461a1a Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 24 Sep 2021 07:39:08 -0600 Subject: io_uring: put provided buffer meta data under memcg accounting For each provided buffer, we allocate a struct io_buffer to hold the data associated with it. As a large number of buffers can be provided, account that data with memcg. Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS") Signed-off-by: Jens Axboe --- fs/io_uring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index ef3c94a55fbd..01e49d01fe74 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -4387,7 +4387,7 @@ static int io_add_buffers(struct io_provide_buf *pbuf, struct io_buffer **head) int i, bid = pbuf->bid; for (i = 0; i < pbuf->nbufs; i++) { - buf = kmalloc(sizeof(*buf), GFP_KERNEL); + buf = kmalloc(sizeof(*buf), GFP_KERNEL_ACCOUNT); if (!buf) break; -- cgit From cdb31c29d397a8076d81fd1458d091c647ef94ba Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 24 Sep 2021 08:43:54 -0600 Subject: io_uring: don't punt files update to io-wq unconditionally There's no reason to punt it unconditionally, we just need to ensure that the submit lock grabbing is conditional. Fixes: 05f3fb3c5397 ("io_uring: avoid ring quiesce for fixed file set unregister and update") Signed-off-by: Jens Axboe --- fs/io_uring.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 01e49d01fe74..c6139ace11fa 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -6340,19 +6340,16 @@ static int io_files_update(struct io_kiocb *req, unsigned int issue_flags) struct io_uring_rsrc_update2 up; int ret; - if (issue_flags & IO_URING_F_NONBLOCK) - return -EAGAIN; - up.offset = req->rsrc_update.offset; up.data = req->rsrc_update.arg; up.nr = 0; up.tags = 0; up.resv = 0; - mutex_lock(&ctx->uring_lock); + io_ring_submit_lock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); ret = __io_register_rsrc_update(ctx, IORING_RSRC_FILE, &up, req->rsrc_update.nr_args); - mutex_unlock(&ctx->uring_lock); + io_ring_submit_unlock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); if (ret < 0) req_set_fail(req); -- cgit From 9f3a2cb228c28606895d15f13b30d1f7402dc745 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Fri, 24 Sep 2021 17:14:48 +0100 Subject: io_uring: kill extra checks in io_write() We don't retry short writes and so we would never get to async setup in io_write() in that case. Thus ret2 > 0 is always false and iov_iter_advance() is never used. Apparently, the same is found by Coverity, which complains on the code. Fixes: cd65869512ab ("io_uring: use iov_iter state save/restore helpers") Reported-by: Dave Jones Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/r/5b33e61034748ef1022766efc0fb8854cfcf749c.1632500058.git.asml.silence@gmail.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index c6139ace11fa..2b3232d53e79 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -3605,7 +3605,6 @@ static int io_write(struct io_kiocb *req, unsigned int issue_flags) iov_iter_save_state(iter, state); } req->result = iov_iter_count(iter); - ret2 = 0; /* Ensure we clear previously set non-block flag */ if (!force_nonblock) @@ -3670,8 +3669,6 @@ done: } else { copy_iov: iov_iter_restore(iter, state); - if (ret2 > 0) - iov_iter_advance(iter, ret2); ret = io_setup_async_rw(req, iovec, inline_vecs, iter, false); return ret ?: -EAGAIN; } -- cgit From a647a524a46736786c95cdb553a070322ca096e3 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 24 Sep 2021 19:07:04 +0800 Subject: block: don't call rq_qos_ops->done_bio if the bio isn't tracked rq_qos framework is only applied on request based driver, so: 1) rq_qos_done_bio() needn't to be called for bio based driver 2) rq_qos_done_bio() needn't to be called for bio which isn't tracked, such as bios ended from error handling code. Especially in bio_endio(): 1) request queue is referred via bio->bi_bdev->bd_disk->queue, which may be gone since request queue refcount may not be held in above two cases 2) q->rq_qos may be freed in blk_cleanup_queue() when calling into __rq_qos_done_bio() Fix the potential kernel panic by not calling rq_qos_ops->done_bio if the bio isn't tracked. This way is safe because both ioc_rqos_done_bio() and blkcg_iolatency_done_bio() are nop if the bio isn't tracked. Reported-by: Yu Kuai Cc: tj@kernel.org Signed-off-by: Ming Lei Reviewed-by: Christoph Hellwig Acked-by: Tejun Heo Link: https://lore.kernel.org/r/20210924110704.1541818-1-ming.lei@redhat.com Signed-off-by: Jens Axboe --- block/bio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/bio.c b/block/bio.c index 5df3dd282e40..a6fb6a0b4295 100644 --- a/block/bio.c +++ b/block/bio.c @@ -1466,7 +1466,7 @@ again: if (!bio_integrity_endio(bio)) return; - if (bio->bi_bdev) + if (bio->bi_bdev && bio_flagged(bio, BIO_TRACKED)) rq_qos_done_bio(bio->bi_bdev->bd_disk->queue, bio); if (bio->bi_bdev && bio_flagged(bio, BIO_TRACE_COMPLETION)) { -- cgit From 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 Mon Sep 17 00:00:00 2001 From: Zhihao Cheng Date: Thu, 23 Sep 2021 21:49:21 +0800 Subject: blktrace: Fix uaf in blk_trace access after removing by sysfs There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. Fixes: c71a896154119f ("blktrace: add ftrace plugin") Signed-off-by: Zhihao Cheng Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com Signed-off-by: Jens Axboe --- kernel/trace/blktrace.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index c221e4c3f625..fa91f398f28b 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -1605,6 +1605,14 @@ static int blk_trace_remove_queue(struct request_queue *q) if (bt == NULL) return -EINVAL; + if (bt->trace_state == Blktrace_running) { + bt->trace_state = Blktrace_stopped; + spin_lock_irq(&running_trace_lock); + list_del_init(&bt->running_list); + spin_unlock_irq(&running_trace_lock); + relay_flush(bt->rchan); + } + put_probe_ref(); synchronize_rcu(); blk_trace_free(bt); -- cgit From f278eb3d8178f9c31f8dfad7e91440e603dd7f1a Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Thu, 23 Sep 2021 10:37:51 +0800 Subject: block: hold ->invalidate_lock in blkdev_fallocate When running ->fallocate(), blkdev_fallocate() should hold mapping->invalidate_lock to prevent page cache from being accessed, otherwise stale data may be read in page cache. Without this patch, blktests block/009 fails sometimes. With this patch, block/009 can pass always. Also as Jan pointed out, no pages can be created in the discarded area while you are holding the invalidate_lock, so remove the 2nd truncate_bdev_range(). Cc: Jan Kara Signed-off-by: Ming Lei Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20210923023751.1441091-1-ming.lei@redhat.com Signed-off-by: Jens Axboe --- block/fops.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/block/fops.c b/block/fops.c index ffce6f6c68dd..1e970c247e0e 100644 --- a/block/fops.c +++ b/block/fops.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "blk.h" static struct inode *bdev_file_inode(struct file *file) @@ -553,7 +554,8 @@ static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to) static long blkdev_fallocate(struct file *file, int mode, loff_t start, loff_t len) { - struct block_device *bdev = I_BDEV(bdev_file_inode(file)); + struct inode *inode = bdev_file_inode(file); + struct block_device *bdev = I_BDEV(inode); loff_t end = start + len - 1; loff_t isize; int error; @@ -580,10 +582,12 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start, if ((start | len) & (bdev_logical_block_size(bdev) - 1)) return -EINVAL; + filemap_invalidate_lock(inode->i_mapping); + /* Invalidate the page cache, including dirty pages. */ error = truncate_bdev_range(bdev, file->f_mode, start, end); if (error) - return error; + goto fail; switch (mode) { case FALLOC_FL_ZERO_RANGE: @@ -600,17 +604,12 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start, GFP_KERNEL, 0); break; default: - return -EOPNOTSUPP; + error = -EOPNOTSUPP; } - if (error) - return error; - /* - * Invalidate the page cache again; if someone wandered in and dirtied - * a page, we just discard it - userspace has no way of knowing whether - * the write happened before or after discard completing... - */ - return truncate_bdev_range(bdev, file->f_mode, start, end); + fail: + filemap_invalidate_unlock(inode->i_mapping); + return error; } const struct file_operations def_blk_fops = { -- cgit From 7df778be2f61e1a23002d1f2f5d6aaf702771eb8 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Fri, 24 Sep 2021 20:04:29 +0100 Subject: io_uring: make OP_CLOSE consistent with direct open From recently open/accept are now able to manipulate fixed file table, but it's inconsistent that close can't. Close the gap, keep API same as with open/accept, i.e. via sqe->file_slot. Signed-off-by: Pavel Begunkov Signed-off-by: Jens Axboe --- fs/io_uring.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 2b3232d53e79..82f867983bb3 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -502,6 +502,7 @@ struct io_poll_update { struct io_close { struct file *file; int fd; + u32 file_slot; }; struct io_timeout_data { @@ -1098,6 +1099,8 @@ static int io_req_prep_async(struct io_kiocb *req); static int io_install_fixed_file(struct io_kiocb *req, struct file *file, unsigned int issue_flags, u32 slot_index); +static int io_close_fixed(struct io_kiocb *req, unsigned int issue_flags); + static enum hrtimer_restart io_link_timeout_fn(struct hrtimer *timer); static struct kmem_cache *req_cachep; @@ -4591,12 +4594,16 @@ static int io_close_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe) if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL)) return -EINVAL; if (sqe->ioprio || sqe->off || sqe->addr || sqe->len || - sqe->rw_flags || sqe->buf_index || sqe->splice_fd_in) + sqe->rw_flags || sqe->buf_index) return -EINVAL; if (req->flags & REQ_F_FIXED_FILE) return -EBADF; req->close.fd = READ_ONCE(sqe->fd); + req->close.file_slot = READ_ONCE(sqe->file_index); + if (req->close.file_slot && req->close.fd) + return -EINVAL; + return 0; } @@ -4608,6 +4615,11 @@ static int io_close(struct io_kiocb *req, unsigned int issue_flags) struct file *file = NULL; int ret = -EBADF; + if (req->close.file_slot) { + ret = io_close_fixed(req, issue_flags); + goto err; + } + spin_lock(&files->file_lock); fdt = files_fdtable(files); if (close->fd >= fdt->max_fds) { @@ -8401,6 +8413,44 @@ err: return ret; } +static int io_close_fixed(struct io_kiocb *req, unsigned int issue_flags) +{ + unsigned int offset = req->close.file_slot - 1; + struct io_ring_ctx *ctx = req->ctx; + struct io_fixed_file *file_slot; + struct file *file; + int ret, i; + + io_ring_submit_lock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); + ret = -ENXIO; + if (unlikely(!ctx->file_data)) + goto out; + ret = -EINVAL; + if (offset >= ctx->nr_user_files) + goto out; + ret = io_rsrc_node_switch_start(ctx); + if (ret) + goto out; + + i = array_index_nospec(offset, ctx->nr_user_files); + file_slot = io_fixed_file_slot(&ctx->file_table, i); + ret = -EBADF; + if (!file_slot->file_ptr) + goto out; + + file = (struct file *)(file_slot->file_ptr & FFS_MASK); + ret = io_queue_rsrc_removal(ctx->file_data, offset, ctx->rsrc_node, file); + if (ret) + goto out; + + file_slot->file_ptr = 0; + io_rsrc_node_switch(ctx, ctx->file_data); + ret = 0; +out: + io_ring_submit_unlock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); + return ret; +} + static int __io_sqe_files_update(struct io_ring_ctx *ctx, struct io_uring_rsrc_update2 *up, unsigned nr_args) -- cgit From acfa299a4a63a58e5e81a87cb16798f20d35f7d7 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Fri, 24 Sep 2021 15:43:20 -0700 Subject: mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable() Commit fcc00621d88b ("mm/hwpoison: retry with shake_page() for unhandlable pages") changed the return value of __get_hwpoison_page() to retry for transiently unhandlable cases. However, __get_hwpoison_page() currently fails to properly judge buddy pages as handlable, so hard/soft offline for buddy pages always fail as "unhandlable page". This is totally regrettable. So let's add is_free_buddy_page() in HWPoisonHandlable(), so that __get_hwpoison_page() returns different return values between buddy pages and unhandlable pages as intended. Link: https://lkml.kernel.org/r/20210909004131.163221-1-naoya.horiguchi@linux.dev Fixes: fcc00621d88b ("mm/hwpoison: retry with shake_page() for unhandlable pages") Signed-off-by: Naoya Horiguchi Acked-by: David Hildenbrand Reviewed-by: Yang Shi Cc: Tony Luck Cc: Oscar Salvador Cc: Mike Kravetz Cc: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 54879c339024..41901c7bb58f 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1126,7 +1126,7 @@ static int page_action(struct page_state *ps, struct page *p, */ static inline bool HWPoisonHandlable(struct page *page) { - return PageLRU(page) || __PageMovable(page); + return PageLRU(page) || __PageMovable(page) || is_free_buddy_page(page); } static int __get_hwpoison_page(struct page *page) -- cgit From fa360beac4b62d54879a88b182afef4b369c9700 Mon Sep 17 00:00:00 2001 From: Marco Elver Date: Fri, 24 Sep 2021 15:43:23 -0700 Subject: kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS In the main KASAN config option CC_HAS_WORKING_NOSANITIZE_ADDRESS is checked for instrumentation-based modes. However, if HAVE_ARCH_KASAN_HW_TAGS is true all modes may still be selected. To fix, also make the software modes depend on CC_HAS_WORKING_NOSANITIZE_ADDRESS. Link: https://lkml.kernel.org/r/20210910084240.1215803-1-elver@google.com Fixes: 6a63a63ff1ac ("kasan: introduce CONFIG_KASAN_HW_TAGS") Signed-off-by: Marco Elver Cc: Andrey Ryabinin Cc: Alexander Potapenko Cc: Andrey Konovalov Cc: Dmitry Vyukov Cc: Aleksandr Nogikh Cc: Taras Madan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig.kasan | 2 ++ 1 file changed, 2 insertions(+) diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index 1e2d10f86011..cdc842d090db 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -66,6 +66,7 @@ choice config KASAN_GENERIC bool "Generic mode" depends on HAVE_ARCH_KASAN && CC_HAS_KASAN_GENERIC + depends on CC_HAS_WORKING_NOSANITIZE_ADDRESS select SLUB_DEBUG if SLUB select CONSTRUCTORS help @@ -86,6 +87,7 @@ config KASAN_GENERIC config KASAN_SW_TAGS bool "Software tag-based mode" depends on HAVE_ARCH_KASAN_SW_TAGS && CC_HAS_KASAN_SW_TAGS + depends on CC_HAS_WORKING_NOSANITIZE_ADDRESS select SLUB_DEBUG if SLUB select CONSTRUCTORS help -- cgit From 892ab4bbd063cfe7f6bbb183e6be69d9907a61de Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Fri, 24 Sep 2021 15:43:26 -0700 Subject: mm/damon: don't use strnlen() with known-bogus source length gcc knows the true length too, and rightfully complains. Link: https://lkml.kernel.org/r/20210912204447.10427-1-kilobyte@angband.pl Signed-off-by: Adam Borowski Cc: SeongJae Park Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/damon/dbgfs-test.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/mm/damon/dbgfs-test.h b/mm/damon/dbgfs-test.h index 930e83bceef0..4eddcfa73996 100644 --- a/mm/damon/dbgfs-test.h +++ b/mm/damon/dbgfs-test.h @@ -20,27 +20,27 @@ static void damon_dbgfs_test_str_to_target_ids(struct kunit *test) ssize_t nr_integers = 0, i; question = "123"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)1, nr_integers); KUNIT_EXPECT_EQ(test, 123ul, answers[0]); kfree(answers); question = "123abc"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)1, nr_integers); KUNIT_EXPECT_EQ(test, 123ul, answers[0]); kfree(answers); question = "a123"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)0, nr_integers); kfree(answers); question = "12 35"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)2, nr_integers); for (i = 0; i < nr_integers; i++) @@ -48,7 +48,7 @@ static void damon_dbgfs_test_str_to_target_ids(struct kunit *test) kfree(answers); question = "12 35 46"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)3, nr_integers); for (i = 0; i < nr_integers; i++) @@ -56,7 +56,7 @@ static void damon_dbgfs_test_str_to_target_ids(struct kunit *test) kfree(answers); question = "12 35 abc 46"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)2, nr_integers); for (i = 0; i < 2; i++) @@ -64,13 +64,13 @@ static void damon_dbgfs_test_str_to_target_ids(struct kunit *test) kfree(answers); question = ""; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)0, nr_integers); kfree(answers); question = "\n"; - answers = str_to_target_ids(question, strnlen(question, 128), + answers = str_to_target_ids(question, strlen(question), &nr_integers); KUNIT_EXPECT_EQ(test, (ssize_t)0, nr_integers); kfree(answers); -- cgit From 867050247e295cf20fce046a92a7e6491fcfe066 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 24 Sep 2021 15:43:29 -0700 Subject: xtensa: increase size of gcc stack frame check xtensa frame size is larger than the frame size for almost all other architectures. This results in more than 50 "the frame size of is larger than 1024 bytes" errors when trying to build xtensa:allmodconfig. Increase frame size for xtensa to 1536 bytes to avoid compile errors due to frame size limits. Link: https://lkml.kernel.org/r/20210912025235.3514761-1-linux@roeck-us.net Signed-off-by: Guenter Roeck Reviewed-by: Max Filippov Cc: Chris Zankel Cc: David Laight Cc: Masahiro Yamada Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index d566f601780f..2a9b6dcdac4f 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -346,7 +346,7 @@ config FRAME_WARN int "Warn for stack frames larger than" range 0 8192 default 2048 if GCC_PLUGIN_LATENT_ENTROPY - default 1536 if (!64BIT && PARISC) + default 1536 if (!64BIT && (PARISC || XTENSA)) default 1024 if (!64BIT && !PARISC) default 2048 if 64BIT help -- cgit From de6ee659684b1a2b149e0780d3c5e8032f3647d6 Mon Sep 17 00:00:00 2001 From: Liu Yuntao Date: Fri, 24 Sep 2021 15:43:32 -0700 Subject: mm/shmem.c: fix judgment error in shmem_is_huge() In the case of SHMEM_HUGE_WITHIN_SIZE, the page index is not rounded up correctly. When the page index points to the first page in a huge page, round_up() cannot bring it to the end of the huge page, but to the end of the previous one. An example: HPAGE_PMD_NR on my machine is 512(2 MB huge page size). After allcoating a 3000 KB buffer, I access it at location 2050 KB. In shmem_is_huge(), the corresponding index happens to be 512. After rounded up by HPAGE_PMD_NR, it will still be 512 which is smaller than i_size, and shmem_is_huge() will return true. As a result, my buffer takes an additional huge page, and that shouldn't happen when shmem_enabled is set to within_size. Link: https://lkml.kernel.org/r/20210909032007.18353-1-liuyuntao10@huawei.com Fixes: f3f0e1d2150b2b ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Liu Yuntao Acked-by: Kirill A. Shutemov Acked-by: Hugh Dickins Cc: wuxu.wu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/shmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/shmem.c b/mm/shmem.c index 88742953532c..b5860f4a2738 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -490,9 +490,9 @@ bool shmem_is_huge(struct vm_area_struct *vma, case SHMEM_HUGE_ALWAYS: return true; case SHMEM_HUGE_WITHIN_SIZE: - index = round_up(index, HPAGE_PMD_NR); + index = round_up(index + 1, HPAGE_PMD_NR); i_size = round_up(i_size_read(inode), PAGE_SIZE); - if (i_size >= HPAGE_PMD_SIZE && (i_size >> PAGE_SHIFT) >= index) + if (i_size >> PAGE_SHIFT >= index) return true; fallthrough; case SHMEM_HUGE_ADVISE: -- cgit From 9c0f0a03e386f4e1df33db676401547e1b7800c6 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Fri, 24 Sep 2021 15:43:35 -0700 Subject: ocfs2: drop acl cache for directories too ocfs2_data_convert_worker() is currently dropping any cached acl info for FILE before down-converting meta lock. It should also drop for DIRECTORY. Otherwise the second acl lookup returns the cached one (from VFS layer) which could be already stale. The problem we are seeing is that the acl changes on one node doesn't get refreshed on other nodes in the following case: Node 1 Node 2 -------------- ---------------- getfacl dir1 getfacl dir1 <-- this is OK setfacl -m u:user1:rwX dir1 getfacl dir1 <-- see the change for user1 getfacl dir1 <-- can't see change for user1 Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/dlmglue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 359524b7341f..801e60bab955 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -3951,7 +3951,7 @@ static int ocfs2_data_convert_worker(struct ocfs2_lock_res *lockres, oi = OCFS2_I(inode); oi->ip_dir_lock_gen++; mlog(0, "generation: %u\n", oi->ip_dir_lock_gen); - goto out; + goto out_forget; } if (!S_ISREG(inode->i_mode)) @@ -3982,6 +3982,7 @@ static int ocfs2_data_convert_worker(struct ocfs2_lock_res *lockres, filemap_fdatawait(mapping); } +out_forget: forget_all_cached_acls(inode); out: -- cgit From d09c38726c78effaf910a1e3f31e247b5b031d56 Mon Sep 17 00:00:00 2001 From: Miles Chen Date: Fri, 24 Sep 2021 15:43:38 -0700 Subject: scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error Fix the following build failure reported in [1] by adding a conditional definition of EM_RISCV in order to allow cross-compilation on machines which do not have EM_RISCV definition in their host. scripts/sorttable.c:352:7: error: use of undeclared identifier 'EM_RISCV' EM_RISCV was added to in glibc 2.24 so builds on systems with glibc headers < 2.24 should show this error. [mkubecek@suse.cz: changelog addition] Link: https://lore.kernel.org/lkml/e8965b25-f15b-c7b4-748c-d207dda9c8e8@i2se.com/ [1] Link: https://lkml.kernel.org/r/20210913030625.4525-1-miles.chen@mediatek.com Fixes: 54fed35fd393 ("riscv: Enable BUILDTIME_TABLE_SORT") Signed-off-by: Miles Chen Reported-by: Stefan Wahren Tested-by: Stefan Wahren Reviewed-by: Jisheng Zhang Cc: Michal Kubecek Cc: Paul Walmsley Cc: Palmer Dabbelt Cc: Albert Ou Cc: Markus Mayer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/sorttable.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/scripts/sorttable.c b/scripts/sorttable.c index f355869c65cd..6ee4fa882919 100644 --- a/scripts/sorttable.c +++ b/scripts/sorttable.c @@ -54,6 +54,10 @@ #define EM_ARCV2 195 #endif +#ifndef EM_RISCV +#define EM_RISCV 243 +#endif + static uint32_t (*r)(const uint32_t *); static uint16_t (*r2)(const uint16_t *); static uint64_t (*r8)(const uint64_t *); -- cgit From ebaeab2fe87987cef28eb5ab174c42cd28594387 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Fri, 24 Sep 2021 15:43:41 -0700 Subject: tools/vm/page-types: remove dependency on opt_file for idle page tracking Idle page tracking can also be used for process address space, not only file mappings. Without this change, using with '-i' option for process address space encounters below errors reported. $ sudo ./page-types -p $(pidof bash) -i mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor ... Link: https://lkml.kernel.org/r/20210917032826.10669-1-changbin.du@gmail.com Signed-off-by: Changbin Du Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- tools/vm/page-types.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/vm/page-types.c b/tools/vm/page-types.c index 0517c744b04e..f62f10c988db 100644 --- a/tools/vm/page-types.c +++ b/tools/vm/page-types.c @@ -1331,7 +1331,7 @@ int main(int argc, char *argv[]) if (opt_list && opt_list_mapcnt) kpagecount_fd = checked_open(PROC_KPAGECOUNT, O_RDONLY); - if (opt_mark_idle && opt_file) + if (opt_mark_idle) page_idle_fd = checked_open(SYS_KERNEL_MM_PAGE_IDLE, O_RDWR); if (opt_list && opt_pid) -- cgit From b7cd9fa5ccc392d9f2269edc4cb82508632c28da Mon Sep 17 00:00:00 2001 From: Paul Menzel Date: Fri, 24 Sep 2021 15:43:44 -0700 Subject: lib/zlib_inflate/inffast: check config in C to avoid unused function warning Building Linux for ppc64le with Ubuntu clang version 12.0.0-3ubuntu1~21.04.1 shows the warning below. arch/powerpc/boot/inffast.c:20:1: warning: unused function 'get_unaligned16' [-Wunused-function] get_unaligned16(const unsigned short *p) ^ 1 warning generated. Fix it by moving the check from the preprocessor to C, so the compiler sees the use. Link: https://lkml.kernel.org/r/20210920084332.5752-1-pmenzel@molgen.mpg.de Signed-off-by: Paul Menzel Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor Cc: Nick Desaulniers Cc: Christophe Leroy Cc: Zhen Lei Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/zlib_inflate/inffast.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c index f19c4fbe1be7..2843f9bb42ac 100644 --- a/lib/zlib_inflate/inffast.c +++ b/lib/zlib_inflate/inffast.c @@ -253,13 +253,12 @@ void inflate_fast(z_streamp strm, unsigned start) sfrom = (unsigned short *)(from); loops = len >> 1; - do -#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS - *sout++ = *sfrom++; -#else - *sout++ = get_unaligned16(sfrom++); -#endif - while (--loops); + do { + if (IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)) + *sout++ = *sfrom++; + else + *sout++ = get_unaligned16(sfrom++); + } while (--loops); out = (unsigned char *)sout; from = (unsigned char *)sfrom; } else { /* dist == 1 or dist == 2 */ -- cgit From 243418e3925d5b5b0657ae54c322d43035e97eed Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Fri, 24 Sep 2021 15:43:47 -0700 Subject: mm: fs: invalidate bh_lrus for only cold path The kernel test robot reported the regression of fio.write_iops[1] with commit 8cc621d2f45d ("mm: fs: invalidate BH LRU during page migration"). Since lru_add_drain is called frequently, invalidate bh_lrus there could increase bh_lrus cache miss ratio, which needs more IO in the end. This patch moves the bh_lrus invalidation from the hot path( e.g., zap_page_range, pagevec_release) to cold path(i.e., lru_add_drain_all, lru_cache_disable). Zhengjun Xing confirmed "I test the patch, the regression reduced to -2.9%" [1] https://lore.kernel.org/lkml/20210520083144.GD14190@xsang-OptiPlex-9020/ [2] 8cc621d2f45d, mm: fs: invalidate BH LRU during page migration Link: https://lkml.kernel.org/r/20210907212347.1977686-1-minchan@kernel.org Signed-off-by: Minchan Kim Reported-by: kernel test robot Reviewed-by: Chris Goldsworthy Tested-by: "Xing, Zhengjun" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/buffer.c | 8 ++++++-- include/linux/buffer_head.h | 4 ++-- mm/swap.c | 19 ++++++++++++++++--- 3 files changed, 24 insertions(+), 7 deletions(-) diff --git a/fs/buffer.c b/fs/buffer.c index ab7573d72dd7..c615387aedca 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -1425,12 +1425,16 @@ void invalidate_bh_lrus(void) } EXPORT_SYMBOL_GPL(invalidate_bh_lrus); -void invalidate_bh_lrus_cpu(int cpu) +/* + * It's called from workqueue context so we need a bh_lru_lock to close + * the race with preemption/irq. + */ +void invalidate_bh_lrus_cpu(void) { struct bh_lru *b; bh_lru_lock(); - b = per_cpu_ptr(&bh_lrus, cpu); + b = this_cpu_ptr(&bh_lrus); __invalidate_bh_lrus(b); bh_lru_unlock(); } diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 6486d3c19463..36f33685c8c0 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -194,7 +194,7 @@ void __breadahead_gfp(struct block_device *, sector_t block, unsigned int size, struct buffer_head *__bread_gfp(struct block_device *, sector_t block, unsigned size, gfp_t gfp); void invalidate_bh_lrus(void); -void invalidate_bh_lrus_cpu(int cpu); +void invalidate_bh_lrus_cpu(void); bool has_bh_in_lru(int cpu, void *dummy); struct buffer_head *alloc_buffer_head(gfp_t gfp_flags); void free_buffer_head(struct buffer_head * bh); @@ -408,7 +408,7 @@ static inline int inode_has_buffers(struct inode *inode) { return 0; } static inline void invalidate_inode_buffers(struct inode *inode) {} static inline int remove_inode_buffers(struct inode *inode) { return 1; } static inline int sync_mapping_buffers(struct address_space *mapping) { return 0; } -static inline void invalidate_bh_lrus_cpu(int cpu) {} +static inline void invalidate_bh_lrus_cpu(void) {} static inline bool has_bh_in_lru(int cpu, void *dummy) { return false; } #define buffer_heads_over_limit 0 diff --git a/mm/swap.c b/mm/swap.c index 897200d27dd0..af3cad4e5378 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -620,7 +620,6 @@ void lru_add_drain_cpu(int cpu) pagevec_lru_move_fn(pvec, lru_lazyfree_fn); activate_page_drain(cpu); - invalidate_bh_lrus_cpu(cpu); } /** @@ -703,6 +702,20 @@ void lru_add_drain(void) local_unlock(&lru_pvecs.lock); } +/* + * It's called from per-cpu workqueue context in SMP case so + * lru_add_drain_cpu and invalidate_bh_lrus_cpu should run on + * the same cpu. It shouldn't be a problem in !SMP case since + * the core is only one and the locks will disable preemption. + */ +static void lru_add_and_bh_lrus_drain(void) +{ + local_lock(&lru_pvecs.lock); + lru_add_drain_cpu(smp_processor_id()); + local_unlock(&lru_pvecs.lock); + invalidate_bh_lrus_cpu(); +} + void lru_add_drain_cpu_zone(struct zone *zone) { local_lock(&lru_pvecs.lock); @@ -717,7 +730,7 @@ static DEFINE_PER_CPU(struct work_struct, lru_add_drain_work); static void lru_add_drain_per_cpu(struct work_struct *dummy) { - lru_add_drain(); + lru_add_and_bh_lrus_drain(); } /* @@ -858,7 +871,7 @@ void lru_cache_disable(void) */ __lru_add_drain_all(true); #else - lru_add_drain(); + lru_add_and_bh_lrus_drain(); #endif } -- cgit From a4ce73910427e960b2c7f4d83229153c327d0ee7 Mon Sep 17 00:00:00 2001 From: Weizhao Ouyang Date: Fri, 24 Sep 2021 15:43:50 -0700 Subject: mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN Sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN to migrate_reason_names. Link: https://lkml.kernel.org/r/20210921064553.293905-2-o451686892@gmail.com Fixes: 310253514bbf ("mm/migrate: rename migration reason MR_CMA to MR_CONTIG_RANGE") Fixes: d1e153fea2a8 ("mm/gup: migrate pinned pages out of movable zone") Signed-off-by: Weizhao Ouyang Reviewed-by: "Huang, Ying" Reviewed-by: John Hubbard Cc: Anshuman Khandual Cc: Michal Hocko Cc: Pavel Tatashin Cc: Yang Shi Cc: Zi Yan Cc: Dave Hansen Cc: Minchan Kim Cc: Mina Almasry Cc: "Matthew Wilcox (Oracle)" Cc: Oscar Salvador Cc: Wei Xu Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/debug.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/debug.c b/mm/debug.c index e73fe0a8ec3d..e61037cded98 100644 --- a/mm/debug.c +++ b/mm/debug.c @@ -24,7 +24,8 @@ const char *migrate_reason_names[MR_TYPES] = { "syscall_or_cpuset", "mempolicy_mbind", "numa_misplaced", - "cma", + "contig_range", + "longterm_pin", }; const struct trace_print_flags pageflag_names[] = { -- cgit From 57ed7b4303a1c4d1885019fef03e6a5af2e8468a Mon Sep 17 00:00:00 2001 From: Weizhao Ouyang Date: Fri, 24 Sep 2021 15:43:53 -0700 Subject: mm/debug: sync up latest migrate_reason to migrate_reason_names Sync up MR_DEMOTION to migrate_reason_names and add a synch prompt. Link: https://lkml.kernel.org/r/20210921064553.293905-3-o451686892@gmail.com Fixes: 26aa2d199d6f ("mm/migrate: demote pages during reclaim") Signed-off-by: Weizhao Ouyang Reviewed-by: "Huang, Ying" Reviewed-by: John Hubbard Cc: Anshuman Khandual Cc: Michal Hocko Cc: Pavel Tatashin Cc: Yang Shi Cc: Zi Yan Cc: Dave Hansen Cc: Minchan Kim Cc: Mina Almasry Cc: "Matthew Wilcox (Oracle)" Cc: Oscar Salvador Cc: Wei Xu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/migrate.h | 6 +++++- mm/debug.c | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/include/linux/migrate.h b/include/linux/migrate.h index 326250996b4e..c8077e936691 100644 --- a/include/linux/migrate.h +++ b/include/linux/migrate.h @@ -19,6 +19,11 @@ struct migration_target_control; */ #define MIGRATEPAGE_SUCCESS 0 +/* + * Keep sync with: + * - macro MIGRATE_REASON in include/trace/events/migrate.h + * - migrate_reason_names[MR_TYPES] in mm/debug.c + */ enum migrate_reason { MR_COMPACTION, MR_MEMORY_FAILURE, @@ -32,7 +37,6 @@ enum migrate_reason { MR_TYPES }; -/* In mm/debug.c; also keep sync with include/trace/events/migrate.h */ extern const char *migrate_reason_names[MR_TYPES]; #ifdef CONFIG_MIGRATION diff --git a/mm/debug.c b/mm/debug.c index e61037cded98..fae0f81ad831 100644 --- a/mm/debug.c +++ b/mm/debug.c @@ -26,6 +26,7 @@ const char *migrate_reason_names[MR_TYPES] = { "numa_misplaced", "contig_range", "longterm_pin", + "demotion", }; const struct trace_print_flags pageflag_names[] = { -- cgit From e8e9f1e6327005be9656aa135aeb9dfdaf6b3032 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 Sep 2021 15:43:57 -0700 Subject: sh: pgtable-3level: fix cast to pointer from integer of different size If X2TLB=y (CPU_SHX2=y or CPU_SHX3=y, e.g. migor_defconfig), pgd_t.pgd is "unsigned long long", causing: In file included from arch/sh/include/asm/pgtable.h:13, from include/linux/pgtable.h:6, from include/linux/mm.h:33, from arch/sh/kernel/asm-offsets.c:14: arch/sh/include/asm/pgtable-3level.h: In function `pud_pgtable': arch/sh/include/asm/pgtable-3level.h:37:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 37 | return (pmd_t *)pud_val(pud); | ^ Fix this by adding an intermediate cast to "unsigned long", which is basically what the old code did before. Link: https://lkml.kernel.org/r/2c2eef3c9a2f57e5609100a4864715ccf253d30f.1631713483.git.geert+renesas@glider.be Fixes: 9cf6fa2458443118 ("mm: rename pud_page_vaddr to pud_pgtable and make it return pmd_t *") Signed-off-by: Geert Uytterhoeven Tested-by: Daniel Palmer Acked-by: Rob Landley Cc: Yoshinori Sato Cc: Rich Felker Cc: "Aneesh Kumar K . V" Cc: Jacopo Mondi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/include/asm/pgtable-3level.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/include/asm/pgtable-3level.h b/arch/sh/include/asm/pgtable-3level.h index 56bf35c2f29c..cdced80a7ffa 100644 --- a/arch/sh/include/asm/pgtable-3level.h +++ b/arch/sh/include/asm/pgtable-3level.h @@ -34,7 +34,7 @@ typedef struct { unsigned long long pmd; } pmd_t; static inline pmd_t *pud_pgtable(pud_t pud) { - return (pmd_t *)pud_val(pud); + return (pmd_t *)(unsigned long)pud_val(pud); } /* only used by the stubbed out hugetlb gup code, should never be called */ -- cgit From 19532869feb9b0a97d17ddc14609d1e53a5b60db Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Fri, 24 Sep 2021 15:44:00 -0700 Subject: kasan: always respect CONFIG_KASAN_STACK Currently, the asan-stack parameter is only passed along if CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to be defined in Kconfig so that the value can be checked. In RISC-V's case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK is disabled, resulting in large stack warnings with allmodconfig: drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12: error: stack frame size (14400) exceeds limit (2048) in function 'lb035q02_connect' [-Werror,-Wframe-larger-than] static int lb035q02_connect(struct omap_dss_device *dssdev) ^ 1 error generated. Ensure that the value of CONFIG_KASAN_STACK is always passed along to the compiler so that these warnings do not happen when CONFIG_KASAN_STACK is disabled. Link: https://github.com/ClangBuiltLinux/linux/issues/1453 References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier") Link: https://lkml.kernel.org/r/20210922205525.570068-1-nathan@kernel.org Signed-off-by: Nathan Chancellor Reviewed-by: Marco Elver Cc: Andrey Ryabinin Cc: Alexander Potapenko Cc: Andrey Konovalov Cc: Dmitry Vyukov Cc: Nick Desaulniers Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/Makefile.kasan | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan index 801c415bac59..b9e94c5e7097 100644 --- a/scripts/Makefile.kasan +++ b/scripts/Makefile.kasan @@ -33,10 +33,11 @@ else CFLAGS_KASAN := $(CFLAGS_KASAN_SHADOW) \ $(call cc-param,asan-globals=1) \ $(call cc-param,asan-instrumentation-with-call-threshold=$(call_threshold)) \ - $(call cc-param,asan-stack=$(stack_enable)) \ $(call cc-param,asan-instrument-allocas=1) endif +CFLAGS_KASAN += $(call cc-param,asan-stack=$(stack_enable)) + endif # CONFIG_KASAN_GENERIC ifdef CONFIG_KASAN_SW_TAGS -- cgit From 5c91c0e77b8f2681e2b269c8abb4c5acef434d5b Mon Sep 17 00:00:00 2001 From: Qi Zheng Date: Fri, 24 Sep 2021 15:44:03 -0700 Subject: mm/memory_failure: fix the missing pte_unmap() call The paired pte_unmap() call is missing before the dev_pagemap_mapping_shift() returns. So fix it. David says: "I guess this code never runs on 32bit / highmem, that's why we didn't notice so far". [akpm@linux-foundation.org: cleanup] Link: https://lkml.kernel.org/r/20210923122642.4999-1-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng Reviewed-by: David Hildenbrand Cc: Naoya Horiguchi Cc: Muchun Song Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 41901c7bb58f..3e6449f2102a 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -306,6 +306,7 @@ static unsigned long dev_pagemap_mapping_shift(struct page *page, struct vm_area_struct *vma) { unsigned long address = vma_address(page, vma); + unsigned long ret = 0; pgd_t *pgd; p4d_t *p4d; pud_t *pud; @@ -329,11 +330,10 @@ static unsigned long dev_pagemap_mapping_shift(struct page *page, if (pmd_devmap(*pmd)) return PMD_SHIFT; pte = pte_offset_map(pmd, address); - if (!pte_present(*pte)) - return 0; - if (pte_devmap(*pte)) - return PAGE_SHIFT; - return 0; + if (pte_present(*pte) && pte_devmap(*pte)) + ret = PAGE_SHIFT; + pte_unmap(pte); + return ret; } /* -- cgit From bcbda81020c3ee77e2c098cadf3e84f99ca3de17 Mon Sep 17 00:00:00 2001 From: Chen Jun Date: Fri, 24 Sep 2021 15:44:06 -0700 Subject: mm: fix uninitialized use in overcommit_policy_handler We get an unexpected value of /proc/sys/vm/overcommit_memory after running the following program: int main() { int fd = open("/proc/sys/vm/overcommit_memory", O_RDWR); write(fd, "1", 1); write(fd, "2", 1); close(fd); } write(fd, "2", 1) will pass *ppos = 1 to proc_dointvec_minmax. proc_dointvec_minmax will return 0 without setting new_policy. t.data = &new_policy; ret = proc_dointvec_minmax(&t, write, buffer, lenp, ppos) -->do_proc_dointvec -->__do_proc_dointvec if (write) { if (proc_first_pos_non_zero_ignore(ppos, table)) goto out; sysctl_overcommit_memory = new_policy; so sysctl_overcommit_memory will be set to an uninitialized value. Check whether new_policy has been changed by proc_dointvec_minmax. Link: https://lkml.kernel.org/r/20210923020524.13289-1-chenjun102@huawei.com Fixes: 56f3547bfa4d ("mm: adjust vm_committed_as_batch according to vm overcommit policy") Signed-off-by: Chen Jun Acked-by: Michal Hocko Reviewed-by: Feng Tang Reviewed-by: Kefeng Wang Cc: Rui Xiang Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/util.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/util.c b/mm/util.c index 499b6b5767ed..bacabe446906 100644 --- a/mm/util.c +++ b/mm/util.c @@ -787,7 +787,7 @@ int overcommit_policy_handler(struct ctl_table *table, int write, void *buffer, size_t *lenp, loff_t *ppos) { struct ctl_table t; - int new_policy; + int new_policy = -1; int ret; /* @@ -805,7 +805,7 @@ int overcommit_policy_handler(struct ctl_table *table, int write, void *buffer, t = *table; t.data = &new_policy; ret = proc_dointvec_minmax(&t, write, buffer, lenp, ppos); - if (ret) + if (ret || new_policy == -1) return ret; mm_compute_batch(new_policy); -- cgit From 265fd1991c1db85fbabaad4946ca0e63e2ae688d Mon Sep 17 00:00:00 2001 From: Hyunchul Lee Date: Sat, 25 Sep 2021 00:06:16 +0900 Subject: ksmbd: use LOOKUP_BENEATH to prevent the out of share access instead of removing '..' in a given path, call kern_path with LOOKUP_BENEATH flag to prevent the out of share access. ran various test on this: smb2-cat-async smb://127.0.0.1/homes/../out_of_share smb2-cat-async smb://127.0.0.1/homes/foo/../../out_of_share smbclient //127.0.0.1/homes -c "mkdir ../foo2" smbclient //127.0.0.1/homes -c "rename bar ../bar" Cc: Ronnie Sahlberg Cc: Ralph Boehme Tested-by: Steve French Tested-by: Namjae Jeon Acked-by: Namjae Jeon Signed-off-by: Hyunchul Lee Signed-off-by: Steve French --- fs/ksmbd/misc.c | 100 +++++++--------------------------- fs/ksmbd/misc.h | 7 +-- fs/ksmbd/smb2pdu.c | 74 ++++++++++--------------- fs/ksmbd/vfs.c | 156 ++++++++++++++++++++++++++++------------------------- fs/ksmbd/vfs.h | 9 +++- 5 files changed, 140 insertions(+), 206 deletions(-) diff --git a/fs/ksmbd/misc.c b/fs/ksmbd/misc.c index 3eac3c01749f..6a19f4bc692d 100644 --- a/fs/ksmbd/misc.c +++ b/fs/ksmbd/misc.c @@ -158,25 +158,21 @@ out: * Return : windows path string or error */ -char *convert_to_nt_pathname(char *filename, char *sharepath) +char *convert_to_nt_pathname(char *filename) { char *ab_pathname; - int len, name_len; - name_len = strlen(filename); - ab_pathname = kmalloc(name_len, GFP_KERNEL); - if (!ab_pathname) - return NULL; - - ab_pathname[0] = '\\'; - ab_pathname[1] = '\0'; + if (strlen(filename) == 0) { + ab_pathname = kmalloc(2, GFP_KERNEL); + ab_pathname[0] = '\\'; + ab_pathname[1] = '\0'; + } else { + ab_pathname = kstrdup(filename, GFP_KERNEL); + if (!ab_pathname) + return NULL; - len = strlen(sharepath); - if (!strncmp(filename, sharepath, len) && name_len != len) { - strscpy(ab_pathname, &filename[len], name_len); ksmbd_conv_path_to_windows(ab_pathname); } - return ab_pathname; } @@ -191,77 +187,19 @@ int get_nlink(struct kstat *st) return nlink; } -char *ksmbd_conv_path_to_unix(char *path) +void ksmbd_conv_path_to_unix(char *path) { - size_t path_len, remain_path_len, out_path_len; - char *out_path, *out_next; - int i, pre_dotdot_cnt = 0, slash_cnt = 0; - bool is_last; - strreplace(path, '\\', '/'); - path_len = strlen(path); - remain_path_len = path_len; - if (path_len == 0) - return ERR_PTR(-EINVAL); - - out_path = kzalloc(path_len + 2, GFP_KERNEL); - if (!out_path) - return ERR_PTR(-ENOMEM); - out_path_len = 0; - out_next = out_path; - - do { - char *name = path + path_len - remain_path_len; - char *next = strchrnul(name, '/'); - size_t name_len = next - name; - - is_last = !next[0]; - if (name_len == 2 && name[0] == '.' && name[1] == '.') { - pre_dotdot_cnt++; - /* handle the case that path ends with "/.." */ - if (is_last) - goto follow_dotdot; - } else { - if (pre_dotdot_cnt) { -follow_dotdot: - slash_cnt = 0; - for (i = out_path_len - 1; i >= 0; i--) { - if (out_path[i] == '/' && - ++slash_cnt == pre_dotdot_cnt + 1) - break; - } - - if (i < 0 && - slash_cnt != pre_dotdot_cnt) { - kfree(out_path); - return ERR_PTR(-EINVAL); - } - - out_next = &out_path[i+1]; - *out_next = '\0'; - out_path_len = i + 1; - - } - - if (name_len != 0 && - !(name_len == 1 && name[0] == '.') && - !(name_len == 2 && name[0] == '.' && name[1] == '.')) { - next[0] = '\0'; - sprintf(out_next, "%s/", name); - out_next += name_len + 1; - out_path_len += name_len + 1; - next[0] = '/'; - } - pre_dotdot_cnt = 0; - } +} - remain_path_len -= name_len + 1; - } while (!is_last); +void ksmbd_strip_last_slash(char *path) +{ + int len = strlen(path); - if (out_path_len > 0) - out_path[out_path_len-1] = '\0'; - path[path_len] = '\0'; - return out_path; + while (len && path[len - 1] == '/') { + path[len - 1] = '\0'; + len--; + } } void ksmbd_conv_path_to_windows(char *path) @@ -298,7 +236,7 @@ char *ksmbd_extract_sharename(char *treename) * * Return: converted name on success, otherwise NULL */ -char *convert_to_unix_name(struct ksmbd_share_config *share, char *name) +char *convert_to_unix_name(struct ksmbd_share_config *share, const char *name) { int no_slash = 0, name_len, path_len; char *new_name; diff --git a/fs/ksmbd/misc.h b/fs/ksmbd/misc.h index b7b10139ada2..253366bd0951 100644 --- a/fs/ksmbd/misc.h +++ b/fs/ksmbd/misc.h @@ -14,12 +14,13 @@ struct ksmbd_file; int match_pattern(const char *str, size_t len, const char *pattern); int ksmbd_validate_filename(char *filename); int parse_stream_name(char *filename, char **stream_name, int *s_type); -char *convert_to_nt_pathname(char *filename, char *sharepath); +char *convert_to_nt_pathname(char *filename); int get_nlink(struct kstat *st); -char *ksmbd_conv_path_to_unix(char *path); +void ksmbd_conv_path_to_unix(char *path); +void ksmbd_strip_last_slash(char *path); void ksmbd_conv_path_to_windows(char *path); char *ksmbd_extract_sharename(char *treename); -char *convert_to_unix_name(struct ksmbd_share_config *share, char *name); +char *convert_to_unix_name(struct ksmbd_share_config *share, const char *name); #define KSMBD_DIR_INFO_ALIGNMENT 8 struct ksmbd_dir_info; diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 0c49a0e887d3..761e12171dc4 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -634,7 +634,7 @@ static char * smb2_get_name(struct ksmbd_share_config *share, const char *src, const int maxlen, struct nls_table *local_nls) { - char *name, *norm_name, *unixname; + char *name; name = smb_strndup_from_utf16(src, maxlen, 1, local_nls); if (IS_ERR(name)) { @@ -642,23 +642,9 @@ smb2_get_name(struct ksmbd_share_config *share, const char *src, return name; } - /* change it to absolute unix name */ - norm_name = ksmbd_conv_path_to_unix(name); - if (IS_ERR(norm_name)) { - kfree(name); - return norm_name; - } - kfree(name); - - unixname = convert_to_unix_name(share, norm_name); - kfree(norm_name); - if (!unixname) { - pr_err("can not convert absolute name\n"); - return ERR_PTR(-ENOMEM); - } - - ksmbd_debug(SMB, "absolute name = %s\n", unixname); - return unixname; + ksmbd_conv_path_to_unix(name); + ksmbd_strip_last_slash(name); + return name; } int setup_async_work(struct ksmbd_work *work, void (*fn)(void **), void **arg) @@ -2352,7 +2338,7 @@ static int smb2_creat(struct ksmbd_work *work, struct path *path, char *name, return rc; } - rc = ksmbd_vfs_kern_path(name, 0, path, 0); + rc = ksmbd_vfs_kern_path(work, name, 0, path, 0); if (rc) { pr_err("cannot get linux path (%s), err = %d\n", name, rc); @@ -2427,7 +2413,7 @@ int smb2_open(struct ksmbd_work *work) struct oplock_info *opinfo; __le32 *next_ptr = NULL; int req_op_level = 0, open_flags = 0, may_flags = 0, file_info = 0; - int rc = 0, len = 0; + int rc = 0; int contxt_cnt = 0, query_disk_id = 0; int maximal_access_ctxt = 0, posix_ctxt = 0; int s_type = 0; @@ -2499,17 +2485,11 @@ int smb2_open(struct ksmbd_work *work) goto err_out1; } } else { - len = strlen(share->path); - ksmbd_debug(SMB, "share path len %d\n", len); - name = kmalloc(len + 1, GFP_KERNEL); + name = kstrdup("", GFP_KERNEL); if (!name) { - rsp->hdr.Status = STATUS_NO_MEMORY; rc = -ENOMEM; goto err_out1; } - - memcpy(name, share->path, len); - *(name + len) = '\0'; } req_op_level = req->RequestedOplockLevel; @@ -2632,7 +2612,7 @@ int smb2_open(struct ksmbd_work *work) goto err_out1; } - rc = ksmbd_vfs_kern_path(name, LOOKUP_NO_SYMLINKS, &path, 1); + rc = ksmbd_vfs_kern_path(work, name, LOOKUP_NO_SYMLINKS, &path, 1); if (!rc) { if (req->CreateOptions & FILE_DELETE_ON_CLOSE_LE) { /* @@ -2661,11 +2641,8 @@ int smb2_open(struct ksmbd_work *work) } if (rc) { - if (rc == -EACCES) { - ksmbd_debug(SMB, - "User does not have right permission\n"); + if (rc != -ENOENT) goto err_out; - } ksmbd_debug(SMB, "can not get linux path for %s, rc = %d\n", name, rc); rc = 0; @@ -3161,7 +3138,7 @@ err_out1: rsp->hdr.Status = STATUS_INVALID_PARAMETER; else if (rc == -EOPNOTSUPP) rsp->hdr.Status = STATUS_NOT_SUPPORTED; - else if (rc == -EACCES || rc == -ESTALE) + else if (rc == -EACCES || rc == -ESTALE || rc == -EXDEV) rsp->hdr.Status = STATUS_ACCESS_DENIED; else if (rc == -ENOENT) rsp->hdr.Status = STATUS_OBJECT_NAME_INVALID; @@ -4277,8 +4254,7 @@ static int get_file_all_info(struct ksmbd_work *work, return -EACCES; } - filename = convert_to_nt_pathname(fp->filename, - work->tcon->share_conf->path); + filename = convert_to_nt_pathname(fp->filename); if (!filename) return -ENOMEM; @@ -4733,7 +4709,7 @@ static int smb2_get_info_filesystem(struct ksmbd_work *work, int rc = 0, len; int fs_infoclass_size = 0; - rc = ksmbd_vfs_kern_path(share->path, LOOKUP_NO_SYMLINKS, &path, 0); + rc = kern_path(share->path, LOOKUP_NO_SYMLINKS, &path); if (rc) { pr_err("cannot create vfs path\n"); return -EIO; @@ -5282,7 +5258,7 @@ static int smb2_rename(struct ksmbd_work *work, goto out; len = strlen(new_name); - if (new_name[len - 1] != '/') { + if (len > 0 && new_name[len - 1] != '/') { pr_err("not allow base filename in rename\n"); rc = -ESHARE; goto out; @@ -5310,11 +5286,14 @@ static int smb2_rename(struct ksmbd_work *work, } ksmbd_debug(SMB, "new name %s\n", new_name); - rc = ksmbd_vfs_kern_path(new_name, LOOKUP_NO_SYMLINKS, &path, 1); - if (rc) + rc = ksmbd_vfs_kern_path(work, new_name, LOOKUP_NO_SYMLINKS, &path, 1); + if (rc) { + if (rc != -ENOENT) + goto out; file_present = false; - else + } else { path_put(&path); + } if (ksmbd_share_veto_filename(share, new_name)) { rc = -ENOENT; @@ -5384,11 +5363,14 @@ static int smb2_create_link(struct ksmbd_work *work, } ksmbd_debug(SMB, "target name is %s\n", target_name); - rc = ksmbd_vfs_kern_path(link_name, LOOKUP_NO_SYMLINKS, &path, 0); - if (rc) + rc = ksmbd_vfs_kern_path(work, link_name, LOOKUP_NO_SYMLINKS, &path, 0); + if (rc) { + if (rc != -ENOENT) + goto out; file_present = false; - else + } else { path_put(&path); + } if (file_info->ReplaceIfExists) { if (file_present) { @@ -5548,7 +5530,7 @@ static int set_file_allocation_info(struct ksmbd_work *work, * inode size is retained by backup inode size. */ size = i_size_read(inode); - rc = ksmbd_vfs_truncate(work, NULL, fp, alloc_blks * 512); + rc = ksmbd_vfs_truncate(work, fp, alloc_blks * 512); if (rc) { pr_err("truncate failed! filename : %s, err %d\n", fp->filename, rc); @@ -5585,7 +5567,7 @@ static int set_end_of_file_info(struct ksmbd_work *work, struct ksmbd_file *fp, if (inode->i_sb->s_magic != MSDOS_SUPER_MAGIC) { ksmbd_debug(SMB, "filename : %s truncated to newsize %lld\n", fp->filename, newsize); - rc = ksmbd_vfs_truncate(work, NULL, fp, newsize); + rc = ksmbd_vfs_truncate(work, fp, newsize); if (rc) { ksmbd_debug(SMB, "truncate failed! filename : %s err %d\n", fp->filename, rc); @@ -5862,7 +5844,7 @@ int smb2_set_info(struct ksmbd_work *work) return 0; err_out: - if (rc == -EACCES || rc == -EPERM) + if (rc == -EACCES || rc == -EPERM || rc == -EXDEV) rsp->hdr.Status = STATUS_ACCESS_DENIED; else if (rc == -EINVAL) rsp->hdr.Status = STATUS_INVALID_PARAMETER; diff --git a/fs/ksmbd/vfs.c b/fs/ksmbd/vfs.c index 3733e4944c1d..b41954294d38 100644 --- a/fs/ksmbd/vfs.c +++ b/fs/ksmbd/vfs.c @@ -19,6 +19,8 @@ #include #include +#include "../internal.h" /* for vfs_path_lookup */ + #include "glob.h" #include "oplock.h" #include "connection.h" @@ -44,7 +46,6 @@ static char *extract_last_component(char *path) p++; } else { p = NULL; - pr_err("Invalid path %s\n", path); } return p; } @@ -155,7 +156,7 @@ int ksmbd_vfs_query_maximal_access(struct user_namespace *user_ns, /** * ksmbd_vfs_create() - vfs helper for smb create file * @work: work - * @name: file name + * @name: file name that is relative to share * @mode: file create mode * * Return: 0 on success, otherwise error @@ -166,7 +167,8 @@ int ksmbd_vfs_create(struct ksmbd_work *work, const char *name, umode_t mode) struct dentry *dentry; int err; - dentry = kern_path_create(AT_FDCWD, name, &path, LOOKUP_NO_SYMLINKS); + dentry = ksmbd_vfs_kern_path_create(work, name, + LOOKUP_NO_SYMLINKS, &path); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); if (err != -ENOENT) @@ -191,7 +193,7 @@ int ksmbd_vfs_create(struct ksmbd_work *work, const char *name, umode_t mode) /** * ksmbd_vfs_mkdir() - vfs helper for smb create directory * @work: work - * @name: directory name + * @name: directory name that is relative to share * @mode: directory create mode * * Return: 0 on success, otherwise error @@ -203,8 +205,9 @@ int ksmbd_vfs_mkdir(struct ksmbd_work *work, const char *name, umode_t mode) struct dentry *dentry; int err; - dentry = kern_path_create(AT_FDCWD, name, &path, - LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY); + dentry = ksmbd_vfs_kern_path_create(work, name, + LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY, + &path); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); if (err != -EEXIST) @@ -579,7 +582,7 @@ int ksmbd_vfs_fsync(struct ksmbd_work *work, u64 fid, u64 p_id) /** * ksmbd_vfs_remove_file() - vfs helper for smb rmdir or unlink - * @name: absolute directory or file name + * @name: directory or file name that is relative to share * * Return: 0 on success, otherwise error */ @@ -593,7 +596,7 @@ int ksmbd_vfs_remove_file(struct ksmbd_work *work, char *name) if (ksmbd_override_fsids(work)) return -ENOMEM; - err = kern_path(name, LOOKUP_NO_SYMLINKS, &path); + err = ksmbd_vfs_kern_path(work, name, LOOKUP_NO_SYMLINKS, &path, false); if (err) { ksmbd_debug(VFS, "can't get %s, err %d\n", name, err); ksmbd_revert_fsids(work); @@ -638,7 +641,7 @@ out_err: /** * ksmbd_vfs_link() - vfs helper for creating smb hardlink * @oldname: source file name - * @newname: hardlink name + * @newname: hardlink name that is relative to share * * Return: 0 on success, otherwise error */ @@ -659,8 +662,9 @@ int ksmbd_vfs_link(struct ksmbd_work *work, const char *oldname, goto out1; } - dentry = kern_path_create(AT_FDCWD, newname, &newpath, - LOOKUP_NO_SYMLINKS | LOOKUP_REVAL); + dentry = ksmbd_vfs_kern_path_create(work, newname, + LOOKUP_NO_SYMLINKS | LOOKUP_REVAL, + &newpath); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); pr_err("path create err for %s, err %d\n", newname, err); @@ -781,14 +785,17 @@ int ksmbd_vfs_fp_rename(struct ksmbd_work *work, struct ksmbd_file *fp, int err; dst_name = extract_last_component(newname); - if (!dst_name) - return -EINVAL; + if (!dst_name) { + dst_name = newname; + newname = ""; + } src_dent_parent = dget_parent(fp->filp->f_path.dentry); src_dent = fp->filp->f_path.dentry; - err = kern_path(newname, LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY, - &dst_path); + err = ksmbd_vfs_kern_path(work, newname, + LOOKUP_NO_SYMLINKS | LOOKUP_DIRECTORY, + &dst_path, false); if (err) { ksmbd_debug(VFS, "Cannot get path for %s [%d]\n", newname, err); goto out; @@ -834,61 +841,43 @@ out: /** * ksmbd_vfs_truncate() - vfs helper for smb file truncate * @work: work - * @name: old filename * @fid: file id of old file * @size: truncate to given size * * Return: 0 on success, otherwise error */ -int ksmbd_vfs_truncate(struct ksmbd_work *work, const char *name, +int ksmbd_vfs_truncate(struct ksmbd_work *work, struct ksmbd_file *fp, loff_t size) { - struct path path; int err = 0; + struct file *filp; - if (name) { - err = kern_path(name, LOOKUP_NO_SYMLINKS, &path); - if (err) { - pr_err("cannot get linux path for %s, err %d\n", - name, err); - return err; - } - err = vfs_truncate(&path, size); - if (err) - pr_err("truncate failed for %s err %d\n", - name, err); - path_put(&path); - } else { - struct file *filp; - - filp = fp->filp; - - /* Do we need to break any of a levelII oplock? */ - smb_break_all_levII_oplock(work, fp, 1); + filp = fp->filp; - if (!work->tcon->posix_extensions) { - struct inode *inode = file_inode(filp); + /* Do we need to break any of a levelII oplock? */ + smb_break_all_levII_oplock(work, fp, 1); - if (size < inode->i_size) { - err = check_lock_range(filp, size, - inode->i_size - 1, WRITE); - } else { - err = check_lock_range(filp, inode->i_size, - size - 1, WRITE); - } + if (!work->tcon->posix_extensions) { + struct inode *inode = file_inode(filp); - if (err) { - pr_err("failed due to lock\n"); - return -EAGAIN; - } + if (size < inode->i_size) { + err = check_lock_range(filp, size, + inode->i_size - 1, WRITE); + } else { + err = check_lock_range(filp, inode->i_size, + size - 1, WRITE); } - err = vfs_truncate(&filp->f_path, size); - if (err) - pr_err("truncate failed for filename : %s err %d\n", - fp->filename, err); + if (err) { + pr_err("failed due to lock\n"); + return -EAGAIN; + } } + err = vfs_truncate(&filp->f_path, size); + if (err) + pr_err("truncate failed for filename : %s err %d\n", + fp->filename, err); return err; } @@ -1206,22 +1195,25 @@ static int ksmbd_vfs_lookup_in_dir(struct path *dir, char *name, size_t namelen) /** * ksmbd_vfs_kern_path() - lookup a file and get path info - * @name: name of file for lookup + * @name: file path that is relative to share * @flags: lookup flags * @path: if lookup succeed, return path info * @caseless: caseless filename lookup * * Return: 0 on success, otherwise error */ -int ksmbd_vfs_kern_path(char *name, unsigned int flags, struct path *path, - bool caseless) +int ksmbd_vfs_kern_path(struct ksmbd_work *work, char *name, + unsigned int flags, struct path *path, bool caseless) { + struct ksmbd_share_config *share_conf = work->tcon->share_conf; int err; - if (name[0] != '/') - return -EINVAL; - - err = kern_path(name, flags, path); + flags |= LOOKUP_BENEATH; + err = vfs_path_lookup(share_conf->vfs_path.dentry, + share_conf->vfs_path.mnt, + name, + flags, + path); if (!err) return 0; @@ -1235,11 +1227,10 @@ int ksmbd_vfs_kern_path(char *name, unsigned int flags, struct path *path, return -ENOMEM; path_len = strlen(filepath); - remain_len = path_len - 1; + remain_len = path_len; - err = kern_path("/", flags, &parent); - if (err) - goto out; + parent = share_conf->vfs_path; + path_get(&parent); while (d_can_lookup(parent.dentry)) { char *filename = filepath + path_len - remain_len; @@ -1252,21 +1243,21 @@ int ksmbd_vfs_kern_path(char *name, unsigned int flags, struct path *path, err = ksmbd_vfs_lookup_in_dir(&parent, filename, filename_len); - if (err) { - path_put(&parent); + path_put(&parent); + if (err) goto out; - } - path_put(&parent); next[0] = '\0'; - err = kern_path(filepath, flags, &parent); + err = vfs_path_lookup(share_conf->vfs_path.dentry, + share_conf->vfs_path.mnt, + filepath, + flags, + &parent); if (err) goto out; - - if (is_last) { - path->mnt = parent.mnt; - path->dentry = parent.dentry; + else if (is_last) { + *path = parent; goto out; } @@ -1282,6 +1273,23 @@ out: return err; } +struct dentry *ksmbd_vfs_kern_path_create(struct ksmbd_work *work, + const char *name, + unsigned int flags, + struct path *path) +{ + char *abs_name; + struct dentry *dent; + + abs_name = convert_to_unix_name(work->tcon->share_conf, name); + if (!abs_name) + return ERR_PTR(-ENOMEM); + + dent = kern_path_create(AT_FDCWD, abs_name, path, flags); + kfree(abs_name); + return dent; +} + int ksmbd_vfs_remove_acl_xattrs(struct user_namespace *user_ns, struct dentry *dentry) { diff --git a/fs/ksmbd/vfs.h b/fs/ksmbd/vfs.h index 85db50abdb24..7b1dcaa3fbdc 100644 --- a/fs/ksmbd/vfs.h +++ b/fs/ksmbd/vfs.h @@ -126,7 +126,7 @@ int ksmbd_vfs_link(struct ksmbd_work *work, int ksmbd_vfs_getattr(struct path *path, struct kstat *stat); int ksmbd_vfs_fp_rename(struct ksmbd_work *work, struct ksmbd_file *fp, char *newname); -int ksmbd_vfs_truncate(struct ksmbd_work *work, const char *name, +int ksmbd_vfs_truncate(struct ksmbd_work *work, struct ksmbd_file *fp, loff_t size); struct srv_copychunk; int ksmbd_vfs_copy_file_ranges(struct ksmbd_work *work, @@ -152,8 +152,13 @@ int ksmbd_vfs_xattr_stream_name(char *stream_name, char **xattr_stream_name, size_t *xattr_stream_name_size, int s_type); int ksmbd_vfs_remove_xattr(struct user_namespace *user_ns, struct dentry *dentry, char *attr_name); -int ksmbd_vfs_kern_path(char *name, unsigned int flags, struct path *path, +int ksmbd_vfs_kern_path(struct ksmbd_work *work, + char *name, unsigned int flags, struct path *path, bool caseless); +struct dentry *ksmbd_vfs_kern_path_create(struct ksmbd_work *work, + const char *name, + unsigned int flags, + struct path *path); int ksmbd_vfs_empty_dir(struct ksmbd_file *fp); void ksmbd_vfs_set_fadvise(struct file *filp, __le32 option); int ksmbd_vfs_zero_data(struct ksmbd_work *work, struct ksmbd_file *fp, -- cgit From b193e15ac69d56f35e1d8e2b5d16cbd47764d053 Mon Sep 17 00:00:00 2001 From: 王贇 Date: Fri, 24 Sep 2021 10:35:58 +0800 Subject: net: prevent user from passing illegal stab size We observed below report when playing with netlink sock: UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10 shift exponent 249 is too large for 32-bit type CPU: 0 PID: 685 Comm: a.out Not tainted Call Trace: dump_stack_lvl+0x8d/0xcf ubsan_epilogue+0xa/0x4e __ubsan_handle_shift_out_of_bounds+0x161/0x182 __qdisc_calculate_pkt_len+0xf0/0x190 __dev_queue_xmit+0x2ed/0x15b0 it seems like kernel won't check the stab log value passing from user, and will use the insane value later to calculate pkt_len. This patch just add a check on the size/cell_log to avoid insane calculation. Reported-by: Abaci Signed-off-by: Michael Wang Signed-off-by: David S. Miller --- include/net/pkt_sched.h | 1 + net/sched/sch_api.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h index 6d7b12cba015..bf79f3a890af 100644 --- a/include/net/pkt_sched.h +++ b/include/net/pkt_sched.h @@ -11,6 +11,7 @@ #include #define DEFAULT_TX_QUEUE_LEN 1000 +#define STAB_SIZE_LOG_MAX 30 struct qdisc_walker { int stop; diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 5e90e9b160e3..12f39a2dffd4 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -513,6 +513,12 @@ static struct qdisc_size_table *qdisc_get_stab(struct nlattr *opt, return stab; } + if (s->size_log > STAB_SIZE_LOG_MAX || + s->cell_log > STAB_SIZE_LOG_MAX) { + NL_SET_ERR_MSG(extack, "Invalid logarithmic size of size table"); + return ERR_PTR(-EINVAL); + } + stab = kmalloc(sizeof(*stab) + tsize * sizeof(u16), GFP_KERNEL); if (!stab) return ERR_PTR(-ENOMEM); -- cgit From 5816b3e6577eaa676ceb00a848f0fd65fe2adc29 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 26 Sep 2021 14:08:19 -0700 Subject: Linux 5.15-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 5e7c1d854441..437ccc66a1c2 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 15 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Opossums on Parade # *DOCUMENTATION* -- cgit From 18d46769d54aba03c2c3fa666fe810f264b5d7b8 Mon Sep 17 00:00:00 2001 From: Ronnie Sahlberg Date: Tue, 21 Sep 2021 14:45:27 +0900 Subject: ksmbd: remove RFC1002 check in smb2 request MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In smb_common.c you have this function : ksmbd_smb_request() which is called from connection.c once you have read the initial 4 bytes for the next length+smb2 blob. It checks the first byte of this 4 byte preamble for valid values, i.e. a NETBIOSoverTCP SESSION_MESSAGE or a SESSION_KEEP_ALIVE. We don't need to check this for ksmbd since it only implements SMB2 over TCP port 445. The netbios stuff was only used in very old servers when SMB ran over TCP port 139. Now that we run over TCP port 445, this is actually not a NB header anymore and you can just treat it as a 4 byte length field that must be less than 16Mbyte. and remove the references to the RFC1002 constants that no longer applies. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Steve French Cc: Sergey Senozhatsky Acked-by: Hyunchul Lee Signed-off-by: Ronnie Sahlberg Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb_common.c | 15 +-------------- fs/ksmbd/smb_common.h | 8 -------- 2 files changed, 1 insertion(+), 22 deletions(-) diff --git a/fs/ksmbd/smb_common.c b/fs/ksmbd/smb_common.c index 40f4fafa2e11..5901b2884c60 100644 --- a/fs/ksmbd/smb_common.c +++ b/fs/ksmbd/smb_common.c @@ -155,20 +155,7 @@ int ksmbd_verify_smb_message(struct ksmbd_work *work) */ bool ksmbd_smb_request(struct ksmbd_conn *conn) { - int type = *(char *)conn->request_buf; - - switch (type) { - case RFC1002_SESSION_MESSAGE: - /* Regular SMB request */ - return true; - case RFC1002_SESSION_KEEP_ALIVE: - ksmbd_debug(SMB, "RFC 1002 session keep alive\n"); - break; - default: - ksmbd_debug(SMB, "RFC 1002 unknown request type 0x%x\n", type); - } - - return false; + return conn->request_buf[0] == 0; } static bool supported_protocol(int idx) diff --git a/fs/ksmbd/smb_common.h b/fs/ksmbd/smb_common.h index 0a6af447cc45..994abede27e9 100644 --- a/fs/ksmbd/smb_common.h +++ b/fs/ksmbd/smb_common.h @@ -48,14 +48,6 @@ #define CIFS_DEFAULT_IOSIZE (64 * 1024) #define MAX_CIFS_SMALL_BUFFER_SIZE 448 /* big enough for most */ -/* RFC 1002 session packet types */ -#define RFC1002_SESSION_MESSAGE 0x00 -#define RFC1002_SESSION_REQUEST 0x81 -#define RFC1002_POSITIVE_SESSION_RESPONSE 0x82 -#define RFC1002_NEGATIVE_SESSION_RESPONSE 0x83 -#define RFC1002_RETARGET_SESSION_RESPONSE 0x84 -#define RFC1002_SESSION_KEEP_ALIVE 0x85 - /* Responses when opening a file. */ #define F_SUPERSEDED 0 #define F_OPENED 1 -- cgit From d72a9c158893d537d769a669a5837bc80b0f851c Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 24 Sep 2021 09:24:08 +0900 Subject: ksmbd: fix invalid request buffer access in compound MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Ronnie reported invalid request buffer access in chained command when inserting garbage value to NextCommand of compound request. This patch add validation check to avoid this issue. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Tested-by: Steve French Reviewed-by: Steve French Acked-by: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 761e12171dc4..cea376b2dd8f 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -459,13 +459,22 @@ static void init_chained_smb2_rsp(struct ksmbd_work *work) bool is_chained_smb2_message(struct ksmbd_work *work) { struct smb2_hdr *hdr = work->request_buf; - unsigned int len; + unsigned int len, next_cmd; if (hdr->ProtocolId != SMB2_PROTO_NUMBER) return false; hdr = ksmbd_req_buf_next(work); - if (le32_to_cpu(hdr->NextCommand) > 0) { + next_cmd = le32_to_cpu(hdr->NextCommand); + if (next_cmd > 0) { + if ((u64)work->next_smb2_rcv_hdr_off + next_cmd + + __SMB2_HEADER_STRUCTURE_SIZE > + get_rfc1002_len(work->request_buf)) { + pr_err("next command(%u) offset exceeds smb msg size\n", + next_cmd); + return false; + } + ksmbd_debug(SMB, "got SMB2 chained command\n"); init_chained_smb2_rsp(work); return true; -- cgit From 88a04049c08cd62e698bc1b1af2d09574b9e0aee Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Thu, 23 Sep 2021 17:59:27 +0530 Subject: HID: amd_sfh: Fix potential NULL pointer dereference The cl_data field of a privdata must be allocated and updated before using in amd_sfh_hid_client_init() function. Hence handling NULL pointer cl_data accordingly. Fixes: d46ef750ed58 ("HID: amd_sfh: Fix potential NULL pointer dereference") Signed-off-by: Basavaraj Natikar Signed-off-by: Jiri Kosina --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index 9a1824757aae..05c007b213f2 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -251,21 +251,17 @@ static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i return rc; } - rc = amd_sfh_hid_client_init(privdata); - if (rc) - return rc; - privdata->cl_data = devm_kzalloc(&pdev->dev, sizeof(struct amdtp_cl_data), GFP_KERNEL); if (!privdata->cl_data) return -ENOMEM; - rc = devm_add_action_or_reset(&pdev->dev, amd_mp2_pci_remove, privdata); + mp2_select_ops(privdata); + + rc = amd_sfh_hid_client_init(privdata); if (rc) return rc; - mp2_select_ops(privdata); - - return 0; + return devm_add_action_or_reset(&pdev->dev, amd_mp2_pci_remove, privdata); } static int __maybe_unused amd_mp2_pci_resume(struct device *dev) -- cgit From da0468a744501065d9ce3891f8ba35be2969ae4d Mon Sep 17 00:00:00 2001 From: Akira Yokosawa Date: Mon, 20 Sep 2021 16:05:00 +0900 Subject: drm/i915/guc, docs: Fix pdfdocs build error by removing nested grid Nested grids in grid-table cells are not specified as proper ReST constructs. Commit 572f2a5cd974 ("drm/i915/guc: Update firmware to v62.0.0") added a couple of kerneldoc tables of the form: +---+-------+------------------------------------------------------+ | 1 | 31:0 | +------------------------------------------------+ | +---+-------+ | | | |...| | | Embedded `HXG Message`_ | | +---+-------+ | | | | n | 31:0 | +------------------------------------------------+ | +---+-------+------------------------------------------------------+ For "make htmldocs", they happen to work as one might expect, but they are incompatible with "make latexdocs" and "make pdfdocs", and cause the generated gpu.tex file to become incomplete and unbuildable by xelatex. Restore the compatibility by removing those nested grids in the tables. Size comparison of generated gpu.tex: Sphinx 2.4.4 Sphinx 4.2.0 v5.14: 3238686 3841631 v5.15-rc1: 376270 432729 with this fix: 3377846 3998095 Fixes: 572f2a5cd974 ("drm/i915/guc: Update firmware to v62.0.0") Cc: John Harrison Cc: Michal Wajdeczko Cc: Matthew Brost Cc: Daniele Ceraolo Spurio Cc: Matt Roper Cc: Jonathan Corbet Signed-off-by: Akira Yokosawa Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/4a227569-074f-c501-58bb-d0d8f60a8ae9@gmail.com (cherry picked from commit 017792a041183c4f5ec595f386e76a40ed728cfc) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h | 10 +++++----- drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h index 99e1fad5ca20..c9086a600bce 100644 --- a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h +++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_ctb_abi.h @@ -102,11 +102,11 @@ static_assert(sizeof(struct guc_ct_buffer_desc) == 64); * | +-------+--------------------------------------------------------------+ * | | 7:0 | NUM_DWORDS = length (in dwords) of the embedded HXG message | * +---+-------+--------------------------------------------------------------+ - * | 1 | 31:0 | +--------------------------------------------------------+ | - * +---+-------+ | | | - * |...| | | Embedded `HXG Message`_ | | - * +---+-------+ | | | - * | n | 31:0 | +--------------------------------------------------------+ | + * | 1 | 31:0 | | + * +---+-------+ | + * |...| | [Embedded `HXG Message`_] | + * +---+-------+ | + * | n | 31:0 | | * +---+-------+--------------------------------------------------------------+ */ diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h index bbf1ddb77434..9baa3cb07d13 100644 --- a/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h +++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_communication_mmio_abi.h @@ -38,11 +38,11 @@ * +---+-------+--------------------------------------------------------------+ * | | Bits | Description | * +===+=======+==============================================================+ - * | 0 | 31:0 | +--------------------------------------------------------+ | - * +---+-------+ | | | - * |...| | | Embedded `HXG Message`_ | | - * +---+-------+ | | | - * | n | 31:0 | +--------------------------------------------------------+ | + * | 0 | 31:0 | | + * +---+-------+ | + * |...| | [Embedded `HXG Message`_] | + * +---+-------+ | + * | n | 31:0 | | * +---+-------+--------------------------------------------------------------+ */ -- cgit From c83ff0186401169eb27ce5057d820b7a863455c3 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Tue, 21 Sep 2021 14:42:02 +0100 Subject: drm/i915/request: fix early tracepoints Currently we blow up in trace_dma_fence_init, when calling into get_driver_name or get_timeline_name, since both the engine and context might be NULL(or contain some garbage address) in the case of newly allocated slab objects via the request ctor. Note that we also use SLAB_TYPESAFE_BY_RCU here, which allows requests to be immediately freed, but delay freeing the underlying page by an RCU grace period. With this scheme requests can be re-allocated, at the same time as they are also being read by some lockless RCU lookup mechanism. In the ctor case, which is only called for new slab objects(i.e allocate new page and call the ctor for each object) it's safe to reset the context/engine prior to calling into dma_fence_init, since we can be certain that no one is doing an RCU lookup which might depend on peeking at the engine/context, like in active_engine(), since the object can't yet be externally visible. In the recycled case(which might also be externally visible) the request refcount always transitions from 0->1 after we set the context/engine etc, which should ensure it's valid to dereference the engine for example, when doing an RCU list-walk, so long as we can also increment the refcount first. If the refcount is already zero, then the request is considered complete/released. If it's non-zero, then the request might be in the process of being re-allocated, or potentially still in flight, however after successfully incrementing the refcount, it's possible to carefully inspect the request state, to determine if the request is still what we were looking for. Note that all externally visible requests returned to the cache must have zero refcount. One possible fix then is to move dma_fence_init out from the request ctor. Originally this was how it was done, but it was moved in: commit 855e39e65cfc33a73724f1cc644ffc5754864a20 Author: Chris Wilson Date: Mon Feb 3 09:41:48 2020 +0000 drm/i915: Initialise basic fence before acquiring seqno where it looks like intel_timeline_get_seqno() relied on some of the rq->fence state, but that is no longer the case since: commit 12ca695d2c1ed26b2dcbb528b42813bd0f216cfc Author: Maarten Lankhorst Date: Tue Mar 23 16:49:50 2021 +0100 drm/i915: Do not share hwsp across contexts any more, v8. intel_timeline_get_seqno() could also be cleaned up slightly by dropping the request argument. Moving dma_fence_init back out of the ctor, should ensure we have enough of the request initialised in case of trace_dma_fence_init. Functionally this should be the same, and is effectively what we were already open coding before, except now we also assign the fence->lock and fence->ops, but since these are invariant for recycled requests(which might be externally visible), and will therefore already hold the same value, it shouldn't matter. An alternative fix, since we don't yet have a fully initialised request when in the ctor, is just setting the context/engine as NULL, but this does require adding some extra handling in get_driver_name etc. v2(Daniel): - Try to make the commit message less confusing Fixes: 855e39e65cfc ("drm/i915: Initialise basic fence before acquiring seqno") Signed-off-by: Matthew Auld Cc: Michael Mason Cc: Daniel Vetter Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20210921134202.3803151-1-matthew.auld@intel.com (cherry picked from commit be988eaee1cb208c4445db46bc3ceaf75f586f0b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_request.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_request.c b/drivers/gpu/drm/i915/i915_request.c index ce446716d092..79da5eca60af 100644 --- a/drivers/gpu/drm/i915/i915_request.c +++ b/drivers/gpu/drm/i915/i915_request.c @@ -829,8 +829,6 @@ static void __i915_request_ctor(void *arg) i915_sw_fence_init(&rq->submit, submit_notify); i915_sw_fence_init(&rq->semaphore, semaphore_notify); - dma_fence_init(&rq->fence, &i915_fence_ops, &rq->lock, 0, 0); - rq->capture_list = NULL; init_llist_head(&rq->execute_cb); @@ -905,17 +903,12 @@ __i915_request_create(struct intel_context *ce, gfp_t gfp) rq->ring = ce->ring; rq->execution_mask = ce->engine->mask; - kref_init(&rq->fence.refcount); - rq->fence.flags = 0; - rq->fence.error = 0; - INIT_LIST_HEAD(&rq->fence.cb_list); - ret = intel_timeline_get_seqno(tl, rq, &seqno); if (ret) goto err_free; - rq->fence.context = tl->fence_context; - rq->fence.seqno = seqno; + dma_fence_init(&rq->fence, &i915_fence_ops, &rq->lock, + tl->fence_context, seqno); RCU_INIT_POINTER(rq->timeline, tl); rq->hwsp_seqno = tl->hwsp_seqno; -- cgit From 4b8bcaf8a6d6ab5db51e30865def5cb694eb2966 Mon Sep 17 00:00:00 2001 From: Tejas Upadhyay Date: Tue, 14 Sep 2021 14:34:12 +0530 Subject: drm/i915: Remove warning from the rps worker In commit 4e5c8a99e1cb ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()"), we decoupled the rps worker from the pm so that we could avoid the synchronization penalty which makes the assertion liable to run too early. Which makes warning invalid hence removed. Fixes: 4e5c8a99e1cb ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()") Reviewed-by: Chris Wilson Signed-off-by: Tejas Upadhyay Signed-off-by: Matt Roper Link: https://patchwork.freedesktop.org/patch/msgid/20210914090412.1393498-1-tejaskumarx.surendrakumar.upadhyay@intel.com (cherry picked from commit a837a0686308d95ad9c48d32b4dfe86a17dc98c2) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_rps.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_rps.c b/drivers/gpu/drm/i915/gt/intel_rps.c index 591a5224287e..0a03fbed9f9b 100644 --- a/drivers/gpu/drm/i915/gt/intel_rps.c +++ b/drivers/gpu/drm/i915/gt/intel_rps.c @@ -882,8 +882,6 @@ void intel_rps_park(struct intel_rps *rps) if (!intel_rps_is_enabled(rps)) return; - GEM_BUG_ON(atomic_read(&rps->num_waiters)); - if (!intel_rps_clear_active(rps)) return; -- cgit From 94513069eb549737bcfc3d988d6ed4da948a2de8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 27 Sep 2021 11:58:39 +0200 Subject: mac80211: fix use-after-free in CCMP/GCMP RX When PN checking is done in mac80211, for fragmentation we need to copy the PN to the RX struct so we can later use it to do a comparison, since commit bf30ca922a0c ("mac80211: check defrag PN against current frame"). Unfortunately, in that commit I used the 'hdr' variable without it being necessarily valid, so use-after-free could occur if it was necessary to reallocate (parts of) the frame. Fix this by reloading the variable after the code that results in the reallocations, if any. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401. Cc: stable@vger.kernel.org Fixes: bf30ca922a0c ("mac80211: check defrag PN against current frame") Link: https://lore.kernel.org/r/20210927115838.12b9ac6bb233.I1d066acd5408a662c3b6e828122cd314fcb28cdb@changeid Signed-off-by: Johannes Berg --- net/mac80211/wpa.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index bca47fad5a16..4eed23e27610 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -520,6 +520,9 @@ ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx, return RX_DROP_UNUSABLE; } + /* reload hdr - skb might have been reallocated */ + hdr = (void *)rx->skb->data; + data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN - mic_len; if (!rx->sta || data_len < 0) return RX_DROP_UNUSABLE; @@ -749,6 +752,9 @@ ieee80211_crypto_gcmp_decrypt(struct ieee80211_rx_data *rx) return RX_DROP_UNUSABLE; } + /* reload hdr - skb might have been reallocated */ + hdr = (void *)rx->skb->data; + data_len = skb->len - hdrlen - IEEE80211_GCMP_HDR_LEN - mic_len; if (!rx->sta || data_len < 0) return RX_DROP_UNUSABLE; -- cgit From 111461d573741c17eafad029ac93474fa9adcce0 Mon Sep 17 00:00:00 2001 From: MichelleJin Date: Mon, 27 Sep 2021 03:34:57 +0000 Subject: mac80211: check return value of rhashtable_init When rhashtable_init() fails, it returns -EINVAL. However, since error return value of rhashtable_init is not checked, it can cause use of uninitialized pointers. So, fix unhandled errors of rhashtable_init. Signed-off-by: MichelleJin Link: https://lore.kernel.org/r/20210927033457.1020967-4-shjy180909@gmail.com Signed-off-by: Johannes Berg --- net/mac80211/mesh_pathtbl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index efbefcbac3ac..7cab1cf09bf1 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -60,7 +60,10 @@ static struct mesh_table *mesh_table_alloc(void) atomic_set(&newtbl->entries, 0); spin_lock_init(&newtbl->gates_lock); spin_lock_init(&newtbl->walk_lock); - rhashtable_init(&newtbl->rhead, &mesh_rht_params); + if (rhashtable_init(&newtbl->rhead, &mesh_rht_params)) { + kfree(newtbl); + return NULL; + } return newtbl; } -- cgit From 33092aca857bf35a8e9cac0e8340c685a4796e90 Mon Sep 17 00:00:00 2001 From: Alexander Wetzel Date: Fri, 24 Sep 2021 22:05:14 +0200 Subject: mac80211: Fix Ptk0 rekey documentation @IEEE80211_KEY_FLAG_GENERATE_IV setting is irrelevant for RX. Move the requirement to the correct section in the PTK0 rekey documentation. Signed-off-by: Alexander Wetzel Link: https://lore.kernel.org/r/20210924200514.7936-1-alexander@wetzel-home.de Signed-off-by: Johannes Berg --- include/net/mac80211.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index af0fc13cea34..618d1f427cb2 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2818,13 +2818,13 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * Mac80211 drivers should set the @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 flag * when they are able to replace in-use PTK keys according to the following * requirements: - * 1) They do not hand over frames decrypted with the old key to - mac80211 once the call to set_key() with command %DISABLE_KEY has been - completed when also setting @IEEE80211_KEY_FLAG_GENERATE_IV for any key, + * 1) They do not hand over frames decrypted with the old key to mac80211 + once the call to set_key() with command %DISABLE_KEY has been completed, 2) either drop or continue to use the old key for any outgoing frames queued at the time of the key deletion (including re-transmits), 3) never send out a frame queued prior to the set_key() %SET_KEY command - encrypted with the new key and + encrypted with the new key when also needing + @IEEE80211_KEY_FLAG_GENERATE_IV and 4) never send out a frame unencrypted when it should be encrypted. Mac80211 will not queue any new frames for a deleted key to the driver. */ -- cgit From 44b6aa2ef69f5b0edf595810236f4ff61503b7e9 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 24 Sep 2021 23:31:46 +0100 Subject: net: hns: Fix spelling mistake "maped" -> "mapped" There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns_mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c index 3e54017a2a5b..07fdab58001d 100644 --- a/drivers/net/ethernet/hisilicon/hns_mdio.c +++ b/drivers/net/ethernet/hisilicon/hns_mdio.c @@ -354,7 +354,7 @@ static int hns_mdio_reset(struct mii_bus *bus) if (dev_of_node(bus->parent)) { if (!mdio_dev->subctrl_vbase) { - dev_err(&bus->dev, "mdio sys ctl reg has not maped\n"); + dev_err(&bus->dev, "mdio sys ctl reg has not mapped\n"); return -ENODEV; } -- cgit From 763716a55cb1f480ffe1a9702e6b5d9ea1a80a24 Mon Sep 17 00:00:00 2001 From: Matthew Hagan Date: Sat, 25 Sep 2021 11:36:27 +0000 Subject: net: bgmac-platform: handle mac-address deferral This patch is a replication of Christian Lamparter's "net: bgmac-bcma: handle deferred probe error due to mac-address" patch for the bgmac-platform driver [1]. As is the case with the bgmac-bcma driver, this change is to cover the scenario where the MAC address cannot yet be discovered due to reliance on an nvmem provider which is yet to be instantiated, resulting in a random address being assigned that has to be manually overridden. [1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.com Signed-off-by: Matthew Hagan Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac-platform.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bgmac-platform.c b/drivers/net/ethernet/broadcom/bgmac-platform.c index 4ab5bf64d353..df8ff839cc62 100644 --- a/drivers/net/ethernet/broadcom/bgmac-platform.c +++ b/drivers/net/ethernet/broadcom/bgmac-platform.c @@ -192,6 +192,9 @@ static int bgmac_probe(struct platform_device *pdev) bgmac->dma_dev = &pdev->dev; ret = of_get_mac_address(np, bgmac->net_dev->dev_addr); + if (ret == -EPROBE_DEFER) + return ret; + if (ret) dev_warn(&pdev->dev, "MAC address not present in device tree\n"); -- cgit From 172da89ed0eaf9d9348f5decb86ad04c624b39d1 Mon Sep 17 00:00:00 2001 From: Vineeth Vijayan Date: Fri, 10 Sep 2021 13:45:24 +0200 Subject: s390/cio: avoid excessive path-verification requests Currently when removing a device from cio_ignore list, we trigger a path-verification for all the subchannels available in the system. This could lead to path-verification requests on subchannels with an online device, which could cause unwanted delay. Instead of all the subchannels, trigger the path-verifications to those without an online device. Reported-by: Julian Wiedmann Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Signed-off-by: Vineeth Vijayan Reviewed-by: Peter Oberparleiter Signed-off-by: Heiko Carstens --- drivers/s390/cio/blacklist.c | 8 +++++--- drivers/s390/cio/css.c | 40 +++++++++++++++++++++++++++++++--------- drivers/s390/cio/css.h | 10 +++++++++- 3 files changed, 45 insertions(+), 13 deletions(-) diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c index f3c656975e05..93695d535380 100644 --- a/drivers/s390/cio/blacklist.c +++ b/drivers/s390/cio/blacklist.c @@ -262,10 +262,12 @@ static int blacklist_parse_proc_parameters(char *buf) if (strcmp("free", parm) == 0) { rc = blacklist_parse_parameters(buf, free, 0); - /* There could be subchannels without proper devices connected. - * evaluate all the entries + /* + * Evaluate the subchannels without an online device. This way, + * no path-verification will be triggered on those subchannels + * and it avoids unnecessary delays. */ - css_schedule_eval_all(); + css_schedule_eval_cond(CSS_EVAL_NOT_ONLINE, 0); } else if (strcmp("add", parm) == 0) rc = blacklist_parse_parameters(buf, add, 0); else if (strcmp("purge", parm) == 0) diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 3377097e65de..44461928aab8 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -788,27 +788,49 @@ static int __unset_registered(struct device *dev, void *data) return 0; } -void css_schedule_eval_all_unreg(unsigned long delay) +static int __unset_online(struct device *dev, void *data) +{ + struct idset *set = data; + struct subchannel *sch = to_subchannel(dev); + struct ccw_device *cdev = sch_get_cdev(sch); + + if (cdev && cdev->online) + idset_sch_del(set, sch->schid); + + return 0; +} + +void css_schedule_eval_cond(enum css_eval_cond cond, unsigned long delay) { unsigned long flags; - struct idset *unreg_set; + struct idset *set; /* Find unregistered subchannels. */ - unreg_set = idset_sch_new(); - if (!unreg_set) { + set = idset_sch_new(); + if (!set) { /* Fallback. */ css_schedule_eval_all(); return; } - idset_fill(unreg_set); - bus_for_each_dev(&css_bus_type, NULL, unreg_set, __unset_registered); + idset_fill(set); + switch (cond) { + case CSS_EVAL_UNREG: + bus_for_each_dev(&css_bus_type, NULL, set, __unset_registered); + break; + case CSS_EVAL_NOT_ONLINE: + bus_for_each_dev(&css_bus_type, NULL, set, __unset_online); + break; + default: + break; + } + /* Apply to slow_subchannel_set. */ spin_lock_irqsave(&slow_subchannel_lock, flags); - idset_add_set(slow_subchannel_set, unreg_set); + idset_add_set(slow_subchannel_set, set); atomic_set(&css_eval_scheduled, 1); queue_delayed_work(cio_work_q, &slow_path_work, delay); spin_unlock_irqrestore(&slow_subchannel_lock, flags); - idset_free(unreg_set); + idset_free(set); } void css_wait_for_slow_path(void) @@ -820,7 +842,7 @@ void css_wait_for_slow_path(void) void css_schedule_reprobe(void) { /* Schedule with a delay to allow merging of subsequent calls. */ - css_schedule_eval_all_unreg(1 * HZ); + css_schedule_eval_cond(CSS_EVAL_UNREG, 1 * HZ); } EXPORT_SYMBOL_GPL(css_schedule_reprobe); diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h index c98522cbe276..ede0b905bc6f 100644 --- a/drivers/s390/cio/css.h +++ b/drivers/s390/cio/css.h @@ -34,6 +34,14 @@ #define SNID_STATE3_MULTI_PATH 1 #define SNID_STATE3_SINGLE_PATH 0 +/* + * Conditions used to specify which subchannels need evaluation + */ +enum css_eval_cond { + CSS_EVAL_UNREG, /* unregistered subchannels */ + CSS_EVAL_NOT_ONLINE /* sch without an online-device */ +}; + struct path_state { __u8 state1 : 2; /* path state value 1 */ __u8 state2 : 2; /* path state value 2 */ @@ -136,7 +144,7 @@ static inline struct channel_subsystem *css_by_id(u8 cssid) /* Helper functions to build lists for the slow path. */ void css_schedule_eval(struct subchannel_id schid); void css_schedule_eval_all(void); -void css_schedule_eval_all_unreg(unsigned long delay); +void css_schedule_eval_cond(enum css_eval_cond, unsigned long delay); int css_complete_work(void); int sch_is_pseudo_sch(struct subchannel *); -- cgit From 2974b8a691a94ad5bf29b584dd4fb03829aa43d1 Mon Sep 17 00:00:00 2001 From: "Desnes A. Nunes do Rosario" Date: Sat, 25 Sep 2021 12:14:18 -0300 Subject: Revert "ibmvnic: check failover_pending in login response" This reverts commit d437f5aa23aa2b7bd07cd44b839d7546cc17166f. Code has been duplicated through commit <273c29e944bd> "ibmvnic: check failover_pending in login response" Signed-off-by: Desnes A. Nunes do Rosario Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index a4579b340120..6aa6ff89a765 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -4708,14 +4708,6 @@ static int handle_login_rsp(union ibmvnic_crq *login_rsp_crq, return 0; } - if (adapter->failover_pending) { - adapter->init_done_rc = -EAGAIN; - netdev_dbg(netdev, "Failover pending, ignoring login response\n"); - complete(&adapter->init_done); - /* login response buffer will be released on reset */ - return 0; - } - netdev->mtu = adapter->req_mtu - ETH_HLEN; netdev_dbg(adapter->netdev, "Login Response Buffer:\n"); -- cgit From ab609f25d19858513919369ff3d9a63c02cd9e2e Mon Sep 17 00:00:00 2001 From: Yanfei Xu Date: Sun, 26 Sep 2021 12:53:13 +0800 Subject: net: mdiobus: Fix memory leak in __mdiobus_register Once device_register() failed, we should call put_device() to decrement reference count for cleanup. Or it will cause memory leak. BUG: memory leak unreferenced object 0xffff888114032e00 (size 256): comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff ................ 08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff .........ve..... backtrace: [] kmalloc include/linux/slab.h:591 [inline] [] kzalloc include/linux/slab.h:721 [inline] [] device_private_init drivers/base/core.c:3203 [inline] [] device_add+0x89b/0xdf0 drivers/base/core.c:3253 [] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537 [] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [] call_driver_probe drivers/base/dd.c:517 [inline] [] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [] really_probe drivers/base/dd.c:558 [inline] [] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [] __device_attach+0x122/0x260 drivers/base/dd.c:969 [] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [] device_add+0x5fb/0xdf0 drivers/base/core.c:3359 [] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170 [] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 BUG: memory leak unreferenced object 0xffff888116f06900 (size 32): comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s) hex dump (first 32 bytes): 75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00 usb-001:003..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kstrdup+0x36/0x70 mm/util.c:60 [] kstrdup_const+0x53/0x80 mm/util.c:83 [] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48 [] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289 [] dev_set_name+0x63/0x90 drivers/base/core.c:3147 [] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535 [] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [] call_driver_probe drivers/base/dd.c:517 [inline] [] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [] really_probe drivers/base/dd.c:558 [inline] [] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [] __device_attach+0x122/0x260 drivers/base/dd.c:969 Reported-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com Signed-off-by: Yanfei Xu Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 53f034fc2ef7..6f4b4e5df639 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -537,6 +537,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) err = device_register(&bus->dev); if (err) { pr_err("mii_bus %s failed to register\n", bus->id); + put_device(&bus->dev); return -EINVAL; } -- cgit From fe23036192c95b66e60d019d2ec1814d0d561ffd Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 26 Sep 2021 19:41:24 +0200 Subject: dsa: mv88e6xxx: 6161: Use chip wide MAX MTU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The datasheets suggests the 6161 uses a per port setting for jumbo frames. Testing has however shown this is not correct, it uses the old style chip wide MTU control. Change the ops in the 6161 structure to reflect this. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 8ab0be793811..86d3cab6ceef 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3725,7 +3725,6 @@ static const struct mv88e6xxx_ops mv88e6161_ops = { .port_set_ucast_flood = mv88e6352_port_set_ucast_flood, .port_set_mcast_flood = mv88e6352_port_set_mcast_flood, .port_set_ether_type = mv88e6351_port_set_ether_type, - .port_set_jumbo_size = mv88e6165_port_set_jumbo_size, .port_egress_rate_limiting = mv88e6097_port_egress_rate_limiting, .port_pause_limit = mv88e6097_port_pause_limit, .port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit, @@ -3750,6 +3749,7 @@ static const struct mv88e6xxx_ops mv88e6161_ops = { .avb_ops = &mv88e6165_avb_ops, .ptp_ops = &mv88e6165_ptp_ops, .phylink_validate = mv88e6185_phylink_validate, + .set_max_frame_size = mv88e6185_g1_set_max_frame_size, }; static const struct mv88e6xxx_ops mv88e6165_ops = { -- cgit From b92ce2f54c0f0ff781e914ec189c25f7bf1b1ec2 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 26 Sep 2021 19:41:25 +0200 Subject: dsa: mv88e6xxx: Fix MTU definition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MTU passed to the DSA driver is the payload size, typically 1500. However, the switch uses the frame size when applying restrictions. Adjust the MTU with the size of the Ethernet header and the frame checksum. The VLAN header also needs to be included when the frame size it per port, but not when it is global. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 12 ++++++------ drivers/net/dsa/mv88e6xxx/global1.c | 2 ++ drivers/net/dsa/mv88e6xxx/port.c | 2 ++ 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 86d3cab6ceef..ed4a6d18142b 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -2834,8 +2834,8 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) if (err) return err; - /* Port Control 2: don't force a good FCS, set the maximum frame size to - * 10240 bytes, disable 802.1q tags checking, don't discard tagged or + /* Port Control 2: don't force a good FCS, set the MTU size to + * 10222 bytes, disable 802.1q tags checking, don't discard tagged or * untagged frames on this port, do a destination address lookup on all * received packets as usual, disable ARP mirroring and don't send a * copy of all transmitted/received frames on this port to the CPU. @@ -2854,7 +2854,7 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) return err; if (chip->info->ops->port_set_jumbo_size) { - err = chip->info->ops->port_set_jumbo_size(chip, port, 10240); + err = chip->info->ops->port_set_jumbo_size(chip, port, 10218); if (err) return err; } @@ -2944,10 +2944,10 @@ static int mv88e6xxx_get_max_mtu(struct dsa_switch *ds, int port) struct mv88e6xxx_chip *chip = ds->priv; if (chip->info->ops->port_set_jumbo_size) - return 10240; + return 10240 - VLAN_ETH_HLEN - ETH_FCS_LEN; else if (chip->info->ops->set_max_frame_size) - return 1632; - return 1522; + return 1632 - VLAN_ETH_HLEN - ETH_FCS_LEN; + return 1522 - VLAN_ETH_HLEN - ETH_FCS_LEN; } static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu) diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c index 815b0f681d69..5848112036b0 100644 --- a/drivers/net/dsa/mv88e6xxx/global1.c +++ b/drivers/net/dsa/mv88e6xxx/global1.c @@ -232,6 +232,8 @@ int mv88e6185_g1_set_max_frame_size(struct mv88e6xxx_chip *chip, int mtu) u16 val; int err; + mtu += ETH_HLEN + ETH_FCS_LEN; + err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &val); if (err) return err; diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c index f77e2ee64a60..451028c57af8 100644 --- a/drivers/net/dsa/mv88e6xxx/port.c +++ b/drivers/net/dsa/mv88e6xxx/port.c @@ -1277,6 +1277,8 @@ int mv88e6165_port_set_jumbo_size(struct mv88e6xxx_chip *chip, int port, u16 reg; int err; + size += VLAN_ETH_HLEN + ETH_FCS_LEN; + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_CTL2, ®); if (err) return err; -- cgit From b9c587fed61cf88bd45822c3159644445f6d5aa6 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 26 Sep 2021 19:41:26 +0200 Subject: dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Same members of the Marvell Ethernet switches impose MTU restrictions on ports used for connecting to the CPU or another switch for DSA. If the MTU is set too low, tagged frames will be discarded. Ensure the worst case tagger overhead is included in setting the MTU for DSA and CPU ports. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 9 ++++++--- drivers/net/dsa/mv88e6xxx/chip.h | 1 + 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index ed4a6d18142b..03744d1c43fc 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -2944,10 +2944,10 @@ static int mv88e6xxx_get_max_mtu(struct dsa_switch *ds, int port) struct mv88e6xxx_chip *chip = ds->priv; if (chip->info->ops->port_set_jumbo_size) - return 10240 - VLAN_ETH_HLEN - ETH_FCS_LEN; + return 10240 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN; else if (chip->info->ops->set_max_frame_size) - return 1632 - VLAN_ETH_HLEN - ETH_FCS_LEN; - return 1522 - VLAN_ETH_HLEN - ETH_FCS_LEN; + return 1632 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN; + return 1522 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN; } static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu) @@ -2955,6 +2955,9 @@ static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu) struct mv88e6xxx_chip *chip = ds->priv; int ret = 0; + if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port)) + new_mtu += EDSA_HLEN; + mv88e6xxx_reg_lock(chip); if (chip->info->ops->port_set_jumbo_size) ret = chip->info->ops->port_set_jumbo_size(chip, port, new_mtu); diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index 675b1f3e43b7..59f316cc8583 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -18,6 +18,7 @@ #include #include +#define EDSA_HLEN 8 #define MV88E6XXX_N_FID 4096 /* PVT limits for 4-bit port and 5-bit switch */ -- cgit From 5c34aea341b16e29fde6e6c8d4b18866cd99754d Mon Sep 17 00:00:00 2001 From: Ian Rogers Date: Wed, 22 Sep 2021 10:38:12 -0700 Subject: perf test: Fix DWARF unwind for optimized builds. To ensure the stack frames are on the stack tail calls optimizations need to be inhibited. If your compiler supports an attribute use it, otherwise use an asm volatile barrier. The barrier fix was suggested here: https://lore.kernel.org/lkml/20201028081123.GT2628@hirez.programming.kicks-ass.net/ Tested with an optimized clang build and by forcing the asm barrier route with an optimized clang build. A GCC bug tracking a proper disable_tail_calls is: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97831 Fixes: 9ae1e990f1ab ("perf tools: Remove broken __no_tail_call attribute") v2. is a rebase. The original fix patch generated quite a lot of discussion over the right place for the fix: https://lore.kernel.org/lkml/20201114000803.909530-1-irogers@google.com/ The patch reflects my preference of it being near the use, so that future code cleanups don't break this somewhat special usage. Signed-off-by: Ian Rogers Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Ard Biesheuvel Cc: Mark Rutland Cc: Miguel Ojeda Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20210922173812.456348-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/dwarf-unwind.c | 39 ++++++++++++++++++++++++++++++++------- 1 file changed, 32 insertions(+), 7 deletions(-) diff --git a/tools/perf/tests/dwarf-unwind.c b/tools/perf/tests/dwarf-unwind.c index a288035eb362..c756284b3b13 100644 --- a/tools/perf/tests/dwarf-unwind.c +++ b/tools/perf/tests/dwarf-unwind.c @@ -20,6 +20,23 @@ /* For bsearch. We try to unwind functions in shared object. */ #include +/* + * The test will assert frames are on the stack but tail call optimizations lose + * the frame of the caller. Clang can disable this optimization on a called + * function but GCC currently (11/2020) lacks this attribute. The barrier is + * used to inhibit tail calls in these cases. + */ +#ifdef __has_attribute +#if __has_attribute(disable_tail_calls) +#define NO_TAIL_CALL_ATTRIBUTE __attribute__((disable_tail_calls)) +#define NO_TAIL_CALL_BARRIER +#endif +#endif +#ifndef NO_TAIL_CALL_ATTRIBUTE +#define NO_TAIL_CALL_ATTRIBUTE +#define NO_TAIL_CALL_BARRIER __asm__ __volatile__("" : : : "memory"); +#endif + static int mmap_handler(struct perf_tool *tool __maybe_unused, union perf_event *event, struct perf_sample *sample, @@ -91,7 +108,7 @@ static int unwind_entry(struct unwind_entry *entry, void *arg) return strcmp((const char *) symbol, funcs[idx]); } -noinline int test_dwarf_unwind__thread(struct thread *thread) +NO_TAIL_CALL_ATTRIBUTE noinline int test_dwarf_unwind__thread(struct thread *thread) { struct perf_sample sample; unsigned long cnt = 0; @@ -122,7 +139,7 @@ noinline int test_dwarf_unwind__thread(struct thread *thread) static int global_unwind_retval = -INT_MAX; -noinline int test_dwarf_unwind__compare(void *p1, void *p2) +NO_TAIL_CALL_ATTRIBUTE noinline int test_dwarf_unwind__compare(void *p1, void *p2) { /* Any possible value should be 'thread' */ struct thread *thread = *(struct thread **)p1; @@ -141,7 +158,7 @@ noinline int test_dwarf_unwind__compare(void *p1, void *p2) return p1 - p2; } -noinline int test_dwarf_unwind__krava_3(struct thread *thread) +NO_TAIL_CALL_ATTRIBUTE noinline int test_dwarf_unwind__krava_3(struct thread *thread) { struct thread *array[2] = {thread, thread}; void *fp = &bsearch; @@ -160,14 +177,22 @@ noinline int test_dwarf_unwind__krava_3(struct thread *thread) return global_unwind_retval; } -noinline int test_dwarf_unwind__krava_2(struct thread *thread) +NO_TAIL_CALL_ATTRIBUTE noinline int test_dwarf_unwind__krava_2(struct thread *thread) { - return test_dwarf_unwind__krava_3(thread); + int ret; + + ret = test_dwarf_unwind__krava_3(thread); + NO_TAIL_CALL_BARRIER; + return ret; } -noinline int test_dwarf_unwind__krava_1(struct thread *thread) +NO_TAIL_CALL_ATTRIBUTE noinline int test_dwarf_unwind__krava_1(struct thread *thread) { - return test_dwarf_unwind__krava_2(thread); + int ret; + + ret = test_dwarf_unwind__krava_2(thread); + NO_TAIL_CALL_BARRIER; + return ret; } int test__dwarf_unwind(struct test *test __maybe_unused, int subtest __maybe_unused) -- cgit From 0f892fd1bd29a25a62c236c5d4f942ee3295ef49 Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 6 Sep 2021 16:22:38 +0100 Subject: perf tests: Fix flaky test 'Object code reading' This test occasionally fails on aarch64 when a sample is taken in free@plt and it fails with "Bytes read differ from those read by objdump". This is because that symbol is near a section boundary in the elf file. Despite the -z option to always output zeros, objdump uses bfd_map_over_sections() to iterate through the elf file so it doesn't see outside of the sections where these zeros are and can't print them. For example this boundary proceeds free@plt in libc with a gap of 48 bytes between .plt and .text: objdump -d -z --start-address=0x23cc8 --stop-address=0x23d08 libc-2.30.so libc-2.30.so: file format elf64-littleaarch64 Disassembly of section .plt: 0000000000023cc8 <*ABS*+0x7fd00@plt+0x8>: 23cc8: 91018210 add x16, x16, #0x60 23ccc: d61f0220 br x17 Disassembly of section .text: 0000000000023d00 : 23d00: a9bf7bfd stp x29, x30, [sp, #-16]! 23d04: 910003fd mov x29, sp Taking a sample in free@plt is very rare because it is so small, but the test can be forced to fail almost every time on any platform by linking the test with a shared library that has a single empty function and calling it in a loop. The fix is to zero the buffers so that when there is a jump in the addresses output by objdump, zeros are already filled in between. Signed-off-by: James Clark Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Link: http://lore.kernel.org/lkml/20210906152238.3415467-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/code-reading.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/tests/code-reading.c b/tools/perf/tests/code-reading.c index 9866cddebf23..9b4a765e4b73 100644 --- a/tools/perf/tests/code-reading.c +++ b/tools/perf/tests/code-reading.c @@ -229,8 +229,8 @@ static int read_object_code(u64 addr, size_t len, u8 cpumode, struct thread *thread, struct state *state) { struct addr_location al; - unsigned char buf1[BUFSZ]; - unsigned char buf2[BUFSZ]; + unsigned char buf1[BUFSZ] = {0}; + unsigned char buf2[BUFSZ] = {0}; size_t ret_len; u64 objdump_addr; const char *objdump_name; -- cgit From 774f2c0890f8aab5d436276ec52a03532256afc7 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 16 Sep 2021 09:13:14 +0100 Subject: perf vendor events powerpc: Fix spelling mistake "icach" -> "icache" There is a spelling mistake in the description text, fix it. Signed-off-by: Colin King Acked-by: Ian Rogers Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: kernel-janitors@vger.kernel.org Link: http://lore.kernel.org/lkml/20210916081314.41751-1-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/pmu-events/arch/powerpc/power8/other.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/pmu-events/arch/powerpc/power8/other.json b/tools/perf/pmu-events/arch/powerpc/power8/other.json index 84a0cedf1fd9..f1f2965f6775 100644 --- a/tools/perf/pmu-events/arch/powerpc/power8/other.json +++ b/tools/perf/pmu-events/arch/powerpc/power8/other.json @@ -1046,7 +1046,7 @@ { "EventCode": "0x4e010", "EventName": "PM_GCT_NOSLOT_IC_L3MISS", - "BriefDescription": "Gct empty for this thread due to icach l3 miss", + "BriefDescription": "Gct empty for this thread due to icache l3 miss", "PublicDescription": "" }, { -- cgit From c6613bd4a57798ef0aefbcdb28d8c90d4c9cecd8 Mon Sep 17 00:00:00 2001 From: Ian Rogers Date: Thu, 23 Sep 2021 08:42:54 -0700 Subject: perf arm: Fix off-by-one directory paths. Relative path include works in the regular build due to -I paths but may fail in other situations. v2. Rebase. Comments on v1 were that we should handle include paths differently and it is agreed that can be a sensible refactor but beyond the scope of this change. https://lore.kernel.org/lkml/20210504191227.793712-1-irogers@google.com/ Signed-off-by: Ian Rogers Cc: Alexander Shishkin Cc: Jiri Olsa Cc: John Garry Cc: Leo Yan Cc: Mark Rutland Cc: Mathieu Poirier Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Sergey Senozhatsky Cc: Stephane Eranian Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20210923154254.737657-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/arm/util/auxtrace.c | 8 ++++---- tools/perf/arch/arm/util/cs-etm.c | 24 ++++++++++++------------ tools/perf/arch/arm/util/perf_regs.c | 2 +- tools/perf/arch/arm/util/pmu.c | 2 +- tools/perf/arch/arm/util/unwind-libdw.c | 6 +++--- tools/perf/arch/arm/util/unwind-libunwind.c | 4 ++-- 6 files changed, 23 insertions(+), 23 deletions(-) diff --git a/tools/perf/arch/arm/util/auxtrace.c b/tools/perf/arch/arm/util/auxtrace.c index c7c7ec0812d5..5fc6a2a3dbc5 100644 --- a/tools/perf/arch/arm/util/auxtrace.c +++ b/tools/perf/arch/arm/util/auxtrace.c @@ -8,10 +8,10 @@ #include #include -#include "../../util/auxtrace.h" -#include "../../util/debug.h" -#include "../../util/evlist.h" -#include "../../util/pmu.h" +#include "../../../util/auxtrace.h" +#include "../../../util/debug.h" +#include "../../../util/evlist.h" +#include "../../../util/pmu.h" #include "cs-etm.h" #include "arm-spe.h" diff --git a/tools/perf/arch/arm/util/cs-etm.c b/tools/perf/arch/arm/util/cs-etm.c index 515aae470e23..293a23bf8be3 100644 --- a/tools/perf/arch/arm/util/cs-etm.c +++ b/tools/perf/arch/arm/util/cs-etm.c @@ -16,19 +16,19 @@ #include #include "cs-etm.h" -#include "../../util/debug.h" -#include "../../util/record.h" -#include "../../util/auxtrace.h" -#include "../../util/cpumap.h" -#include "../../util/event.h" -#include "../../util/evlist.h" -#include "../../util/evsel.h" -#include "../../util/perf_api_probe.h" -#include "../../util/evsel_config.h" -#include "../../util/pmu.h" -#include "../../util/cs-etm.h" +#include "../../../util/debug.h" +#include "../../../util/record.h" +#include "../../../util/auxtrace.h" +#include "../../../util/cpumap.h" +#include "../../../util/event.h" +#include "../../../util/evlist.h" +#include "../../../util/evsel.h" +#include "../../../util/perf_api_probe.h" +#include "../../../util/evsel_config.h" +#include "../../../util/pmu.h" +#include "../../../util/cs-etm.h" #include // page_size -#include "../../util/session.h" +#include "../../../util/session.h" #include #include diff --git a/tools/perf/arch/arm/util/perf_regs.c b/tools/perf/arch/arm/util/perf_regs.c index 2864e2e3776d..2833e101a7c6 100644 --- a/tools/perf/arch/arm/util/perf_regs.c +++ b/tools/perf/arch/arm/util/perf_regs.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -#include "../../util/perf_regs.h" +#include "../../../util/perf_regs.h" const struct sample_reg sample_reg_masks[] = { SMPL_REG_END diff --git a/tools/perf/arch/arm/util/pmu.c b/tools/perf/arch/arm/util/pmu.c index bbc297a7e2e3..b8b23b9dc598 100644 --- a/tools/perf/arch/arm/util/pmu.c +++ b/tools/perf/arch/arm/util/pmu.c @@ -10,7 +10,7 @@ #include #include "arm-spe.h" -#include "../../util/pmu.h" +#include "../../../util/pmu.h" struct perf_event_attr *perf_pmu__get_default_config(struct perf_pmu *pmu __maybe_unused) diff --git a/tools/perf/arch/arm/util/unwind-libdw.c b/tools/perf/arch/arm/util/unwind-libdw.c index 36ba4c69c3c5..b7692cb0c733 100644 --- a/tools/perf/arch/arm/util/unwind-libdw.c +++ b/tools/perf/arch/arm/util/unwind-libdw.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 #include -#include "../../util/unwind-libdw.h" -#include "../../util/perf_regs.h" -#include "../../util/event.h" +#include "../../../util/unwind-libdw.h" +#include "../../../util/perf_regs.h" +#include "../../../util/event.h" bool libdw__arch_set_initial_registers(Dwfl_Thread *thread, void *arg) { diff --git a/tools/perf/arch/arm/util/unwind-libunwind.c b/tools/perf/arch/arm/util/unwind-libunwind.c index 3a550225dfaf..438906bf0014 100644 --- a/tools/perf/arch/arm/util/unwind-libunwind.c +++ b/tools/perf/arch/arm/util/unwind-libunwind.c @@ -3,8 +3,8 @@ #include #include #include "perf_regs.h" -#include "../../util/unwind.h" -#include "../../util/debug.h" +#include "../../../util/unwind.h" +#include "../../../util/debug.h" int libunwind__arch_reg_id(int regnum) { -- cgit From 4da6552c5d07bfc88576ed9ad7fc81fce4c3ba41 Mon Sep 17 00:00:00 2001 From: Like Xu Date: Fri, 24 Sep 2021 16:19:42 +0800 Subject: perf doc: Fix typos all over the place Considering that perf and its subcommands have so many parameters, the documentation is always the first stop for perf beginners. Fixing some spelling errors will relax the eyes of some readers a little bit. s/specicfication/specification/ s/caheline/cacheline/ s/tranasaction/transaction/ s/complan/complain/ s/sched_wakep/sched_wakeup/ s/possble/possible/ s/methology/methodology/ Signed-off-by: Like Xu Acked-by: Ian Rogers Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Jonathan Corbet Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lore.kernel.org/lkml/20210924081942.38368-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/jitdump-specification.txt | 2 +- tools/perf/Documentation/perf-c2c.txt | 2 +- tools/perf/Documentation/perf-intel-pt.txt | 2 +- tools/perf/Documentation/perf-lock.txt | 2 +- tools/perf/Documentation/perf-script-perl.txt | 2 +- tools/perf/Documentation/perf-script-python.txt | 2 +- tools/perf/Documentation/perf-stat.txt | 2 +- tools/perf/Documentation/topdown.txt | 2 +- 8 files changed, 8 insertions(+), 8 deletions(-) diff --git a/tools/perf/Documentation/jitdump-specification.txt b/tools/perf/Documentation/jitdump-specification.txt index 52152d156ad9..79936355d819 100644 --- a/tools/perf/Documentation/jitdump-specification.txt +++ b/tools/perf/Documentation/jitdump-specification.txt @@ -164,7 +164,7 @@ const char unwinding_data[n]: an array of unwinding data, consisting of the EH F The EH Frame header follows the Linux Standard Base (LSB) specification as described in the document at https://refspecs.linuxfoundation.org/LSB_1.3.0/gLSB/gLSB/ehframehdr.html -The EH Frame follows the LSB specicfication as described in the document at https://refspecs.linuxbase.org/LSB_3.0.0/LSB-PDA/LSB-PDA/ehframechpt.html +The EH Frame follows the LSB specification as described in the document at https://refspecs.linuxbase.org/LSB_3.0.0/LSB-PDA/LSB-PDA/ehframechpt.html NOTE: The mapped_size is generally either the same as unwind_data_size (if the unwinding data was mapped in memory by the running process) or zero (if the unwinding data is not mapped by the process). If the unwinding data was not mapped, then only the EH Frame Header will be read, which can be used to specify FP based unwinding for a function which does not have unwinding information. diff --git a/tools/perf/Documentation/perf-c2c.txt b/tools/perf/Documentation/perf-c2c.txt index de6beedb7283..3b6a2c84ea02 100644 --- a/tools/perf/Documentation/perf-c2c.txt +++ b/tools/perf/Documentation/perf-c2c.txt @@ -261,7 +261,7 @@ COALESCE User can specify how to sort offsets for cacheline. Following fields are available and governs the final -output fields set for caheline offsets output: +output fields set for cacheline offsets output: tid - coalesced by process TIDs pid - coalesced by process PIDs diff --git a/tools/perf/Documentation/perf-intel-pt.txt b/tools/perf/Documentation/perf-intel-pt.txt index 184ba62420f0..db465fa7ee91 100644 --- a/tools/perf/Documentation/perf-intel-pt.txt +++ b/tools/perf/Documentation/perf-intel-pt.txt @@ -883,7 +883,7 @@ and "r" can be combined to get calls and returns. "Transactions" events correspond to the start or end of transactions. The 'flags' field can be used in perf script to determine whether the event is a -tranasaction start, commit or abort. +transaction start, commit or abort. Note that "instructions", "branches" and "transactions" events depend on code flow packets which can be disabled by using the config term "branch=0". Refer diff --git a/tools/perf/Documentation/perf-lock.txt b/tools/perf/Documentation/perf-lock.txt index 74d774592196..1b4d452923d7 100644 --- a/tools/perf/Documentation/perf-lock.txt +++ b/tools/perf/Documentation/perf-lock.txt @@ -44,7 +44,7 @@ COMMON OPTIONS -f:: --force:: - Don't complan, do it. + Don't complain, do it. REPORT OPTIONS -------------- diff --git a/tools/perf/Documentation/perf-script-perl.txt b/tools/perf/Documentation/perf-script-perl.txt index 5a1f68122f50..fa4f39d305a7 100644 --- a/tools/perf/Documentation/perf-script-perl.txt +++ b/tools/perf/Documentation/perf-script-perl.txt @@ -54,7 +54,7 @@ all sched_wakeup events in the system: Traces meant to be processed using a script should be recorded with the above option: -a to enable system-wide collection. -The format file for the sched_wakep event defines the following fields +The format file for the sched_wakeup event defines the following fields (see /sys/kernel/debug/tracing/events/sched/sched_wakeup/format): ---- diff --git a/tools/perf/Documentation/perf-script-python.txt b/tools/perf/Documentation/perf-script-python.txt index 0250dc61cf98..cf4b7f4b625a 100644 --- a/tools/perf/Documentation/perf-script-python.txt +++ b/tools/perf/Documentation/perf-script-python.txt @@ -448,7 +448,7 @@ all sched_wakeup events in the system: Traces meant to be processed using a script should be recorded with the above option: -a to enable system-wide collection. -The format file for the sched_wakep event defines the following fields +The format file for the sched_wakeup event defines the following fields (see /sys/kernel/debug/tracing/events/sched/sched_wakeup/format): ---- diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt index 4c9310be6acc..7e6fb7cbc0f4 100644 --- a/tools/perf/Documentation/perf-stat.txt +++ b/tools/perf/Documentation/perf-stat.txt @@ -385,7 +385,7 @@ Aggregate counts per physical processor for system-wide mode measurements. Print metrics or metricgroups specified in a comma separated list. For a group all metrics from the group are added. The events from the metrics are automatically measured. -See perf list output for the possble metrics and metricgroups. +See perf list output for the possible metrics and metricgroups. -A:: --no-aggr:: diff --git a/tools/perf/Documentation/topdown.txt b/tools/perf/Documentation/topdown.txt index c6302df4cf29..a15b93fdcf50 100644 --- a/tools/perf/Documentation/topdown.txt +++ b/tools/perf/Documentation/topdown.txt @@ -2,7 +2,7 @@ Using TopDown metrics in user space ----------------------------------- Intel CPUs (since Sandy Bridge and Silvermont) support a TopDown -methology to break down CPU pipeline execution into 4 bottlenecks: +methodology to break down CPU pipeline execution into 4 bottlenecks: frontend bound, backend bound, bad speculation, retiring. For more details on Topdown see [1][5] -- cgit From a827c007c75be4f6038f3d879045fb1ab6385d6b Mon Sep 17 00:00:00 2001 From: Like Xu Date: Fri, 24 Sep 2021 19:58:17 +0800 Subject: perf config: Refine error message to eliminate confusion If there is no configuration file at first, the user can write any pair of "key.subkey=value" to the newly created configuration file, while value validation against a valid configurable key is *deferred* until the next execution or the implied execution of "perf config ... ". For example: $ rm ~/.perfconfig $ perf config call-graph.dump-size=65529 $ cat ~/.perfconfig # this file is auto-generated. [call-graph] dump-size = 65529 $ perf config call-graph.dump-size=2048 callchain: Incorrect stack dump size (max 65528): 65529 Error: wrong config key-value pair call-graph.dump-size=65529 The user might expect that the second value 2048 is valid and can be updated to the configuration file, but the error message is very confusing because the first value 65529 is not reported as an error during the last configuration. It is recommended not to change the current behavior of delayed validation (as more effort is needed), but to refine the original error message to *clearly indicate* that the cause of the error is the configuration file. Signed-off-by: Like Xu Acked-by: Ian Rogers Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20210924115817.58689-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c index 4fb5e90d7a57..60ce5908c664 100644 --- a/tools/perf/util/config.c +++ b/tools/perf/util/config.c @@ -801,7 +801,7 @@ int perf_config_set(struct perf_config_set *set, section->name, item->name); ret = fn(key, value, data); if (ret < 0) { - pr_err("Error: wrong config key-value pair %s=%s\n", + pr_err("Error in the given config file: wrong config key-value pair %s=%s\n", key, value); /* * Can't be just a 'break', as perf_config_set__for_each_entry() -- cgit From e4fe5d7349e0b1c0d3da5b6b3e1efce591e85bd2 Mon Sep 17 00:00:00 2001 From: Like Xu Date: Mon, 27 Sep 2021 16:11:14 +0800 Subject: perf iostat: Use system-wide mode if the target cpu_list is unspecified An iostate use case like "perf iostat 0000:16,0000:97 -- ls" should be implemented to work in system-wide mode to ensure that the output from print_header() is consistent with the user documentation perf-iostat.txt, rather than incorrectly assuming that the kernel does not support it: Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) \ for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. This error is easily fixed by assigning system-wide mode by default for IOSTAT_RUN only when the target cpu_list is unspecified. Fixes: f07952b179697771 ("perf stat: Basic support for iostat in perf") Signed-off-by: Like Xu Cc: Alexander Antonov Cc: Alexander Shishkin Cc: Ian Rogers Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lore.kernel.org/lkml/20210927081115.39568-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-stat.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index f6e87b7be5fa..f0ecfda34ece 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -2408,6 +2408,8 @@ int cmd_stat(int argc, const char **argv) goto out; } else if (verbose) iostat_list(evsel_list, &stat_config); + if (iostat_mode == IOSTAT_RUN && !target__has_cpu(&target)) + target.system_wide = true; } if (add_default_attributes()) -- cgit From 4da8b121884d84476f3d50d46a471471af1aa9df Mon Sep 17 00:00:00 2001 From: Like Xu Date: Mon, 27 Sep 2021 16:11:15 +0800 Subject: perf iostat: Fix Segmentation fault from NULL 'struct perf_counts_values *' If the 'perf iostat' user specifies two or more iio_root_ports and also specifies the cpu(s) by -C which is not *connected to all* the above iio ports, the iostat_print_metric() will run into trouble: For example: $ perf iostat list S0-uncore_iio_0<0000:16> S1-uncore_iio_0<0000:97> # <--- CPU 1 is located in the socket S0 $ perf iostat 0000:16,0000:97 -C 1 -- ls port Inbound Read(MB) Inbound Write(MB) Outbound Read(MB) Outbound Write(MB) ../perf-iostat: line 12: 104418 Segmentation fault (core dumped) perf stat --iostat$DELIMITER$* The core-dump stack says, in the above corner case, the returned (struct perf_counts_values *) count will be NULL, and the caller iostat_print_metric() apparently doesn't not handle this case. 433 struct perf_counts_values *count = perf_counts(evsel->counts, die, 0); 434 435 if (count->run && count->ena) { (gdb) p count $1 = (struct perf_counts_values *) 0x0 The deeper reason is that there are actually no statistics from the user specified pair "iostat 0000:X, -C (disconnected) Y ", but let's fix it with minimum cost by adding a NULL check in the user space. Fixes: f9ed693e8bc0e7de ("perf stat: Enable iostat mode for x86 platforms") Signed-off-by: Like Xu Cc: Alexander Antonov Cc: Alexander Shishkin Cc: Ian Rogers Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lore.kernel.org/lkml/20210927081115.39568-2-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/x86/util/iostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/arch/x86/util/iostat.c b/tools/perf/arch/x86/util/iostat.c index eeafe97b8105..792cd75ade33 100644 --- a/tools/perf/arch/x86/util/iostat.c +++ b/tools/perf/arch/x86/util/iostat.c @@ -432,7 +432,7 @@ void iostat_print_metric(struct perf_stat_config *config, struct evsel *evsel, u8 die = ((struct iio_root_port *)evsel->priv)->die; struct perf_counts_values *count = perf_counts(evsel->counts, die, 0); - if (count->run && count->ena) { + if (count && count->run && count->ena) { if (evsel->prev_raw_counts && !out->force_header) { struct perf_counts_values *prev_count = perf_counts(evsel->prev_raw_counts, die, 0); -- cgit From 3b1b6e82fb5e08e2cb355d7b2ee8644ec289de66 Mon Sep 17 00:00:00 2001 From: Xu Liang Date: Mon, 27 Sep 2021 15:03:02 +0800 Subject: net: phy: enhance GPY115 loopback disable function GPY115 need reset PHY when it comes out from loopback mode if the firmware version number (lower 8 bits) is equal to or below 0x76. Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Xu Liang Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mxl-gpy.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c index 2d5d5081c3b6..5ce1bf03bbd7 100644 --- a/drivers/net/phy/mxl-gpy.c +++ b/drivers/net/phy/mxl-gpy.c @@ -493,6 +493,25 @@ static int gpy_loopback(struct phy_device *phydev, bool enable) return ret; } +static int gpy115_loopback(struct phy_device *phydev, bool enable) +{ + int ret; + int fw_minor; + + if (enable) + return gpy_loopback(phydev, enable); + + ret = phy_read(phydev, PHY_FWV); + if (ret < 0) + return ret; + + fw_minor = FIELD_GET(PHY_FWV_MINOR_MASK, ret); + if (fw_minor > 0x0076) + return gpy_loopback(phydev, 0); + + return genphy_soft_reset(phydev); +} + static struct phy_driver gpy_drivers[] = { { PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx), @@ -527,7 +546,7 @@ static struct phy_driver gpy_drivers[] = { .handle_interrupt = gpy_handle_interrupt, .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, - .set_loopback = gpy_loopback, + .set_loopback = gpy115_loopback, }, { PHY_ID_MATCH_MODEL(PHY_ID_GPY115C), @@ -544,7 +563,7 @@ static struct phy_driver gpy_drivers[] = { .handle_interrupt = gpy_handle_interrupt, .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, - .set_loopback = gpy_loopback, + .set_loopback = gpy115_loopback, }, { .phy_id = PHY_ID_GPY211B, -- cgit From 9523b33cc31cf8ce703f8facee9fd16cba36d5ad Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 Sep 2021 14:05:25 -0700 Subject: NIOS2: setup.c: drop unused variable 'dram_start' This is a nuisance when CONFIG_WERROR is set, so drop the variable declaration since the code that used it was removed. ../arch/nios2/kernel/setup.c: In function 'setup_arch': ../arch/nios2/kernel/setup.c:152:13: warning: unused variable 'dram_start' [-Wunused-variable] 152 | int dram_start; Fixes: 7f7bc20bc41a ("nios2: Don't use _end for calculating min_low_pfn") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Reviewed-by: Mike Rapoport Cc: Andreas Oetken Signed-off-by: Dinh Nguyen --- arch/nios2/kernel/setup.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c index cf8d687a2644..40bc8fb75e0b 100644 --- a/arch/nios2/kernel/setup.c +++ b/arch/nios2/kernel/setup.c @@ -149,8 +149,6 @@ static void __init find_limits(unsigned long *min, unsigned long *max_low, void __init setup_arch(char **cmdline_p) { - int dram_start; - console_verbose(); memory_start = memblock_start_of_DRAM(); -- cgit From a89936cce87d60766a75732a9e7e25c51164f47c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:46:17 +0200 Subject: ipack: ipoctal: fix stack information leak The tty driver name is used also after registering the driver and must specifically not be allocated on the stack to avoid leaking information to user space (or triggering an oops). Drivers should not try to encode topology information in the tty device name but this one snuck in through staging without anyone noticing and another driver has since copied this malpractice. Fixing the ABI is a separate issue, but this at least plugs the security hole. Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board") Cc: stable@vger.kernel.org # 3.5 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/ipack/devices/ipoctal.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index c14e65a5d38f..c62fec75987c 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -264,7 +264,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, int res; int i; struct tty_driver *tty; - char name[20]; struct ipoctal_channel *channel; struct ipack_region *region; void __iomem *addr; @@ -355,8 +354,11 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, /* Fill struct tty_driver with ipoctal data */ tty->owner = THIS_MODULE; tty->driver_name = KBUILD_MODNAME; - sprintf(name, KBUILD_MODNAME ".%d.%d.", bus_nr, slot); - tty->name = name; + tty->name = kasprintf(GFP_KERNEL, KBUILD_MODNAME ".%d.%d.", bus_nr, slot); + if (!tty->name) { + res = -ENOMEM; + goto err_put_driver; + } tty->major = 0; tty->minor_start = 0; @@ -371,8 +373,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, res = tty_register_driver(tty); if (res) { dev_err(&ipoctal->dev->dev, "Can't register tty driver.\n"); - tty_driver_kref_put(tty); - return res; + goto err_free_name; } /* Save struct tty_driver for use it when uninstalling the device */ @@ -409,6 +410,13 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, ipoctal_irq_handler, ipoctal); return 0; + +err_free_name: + kfree(tty->name); +err_put_driver: + tty_driver_kref_put(tty); + + return res; } static inline int ipoctal_copy_write_buffer(struct ipoctal_channel *channel, @@ -696,6 +704,7 @@ static void __ipoctal_remove(struct ipoctal *ipoctal) } tty_unregister_driver(ipoctal->tty_drv); + kfree(ipoctal->tty_drv->name); tty_driver_kref_put(ipoctal->tty_drv); kfree(ipoctal); } -- cgit From 65c001df517a7bf9be8621b53d43c89f426ce8d6 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:46:18 +0200 Subject: ipack: ipoctal: fix tty registration race Make sure to set the tty class-device driver data before registering the tty to avoid having a racing open() dereference a NULL pointer. Fixes: 9c1d784afc6f ("Staging: ipack/devices/ipoctal: Get rid of ipoctal_list.") Cc: stable@vger.kernel.org # 3.7 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/ipack/devices/ipoctal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index c62fec75987c..262451343127 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -392,13 +392,13 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, spin_lock_init(&channel->lock); channel->pointer_read = 0; channel->pointer_write = 0; - tty_dev = tty_port_register_device(&channel->tty_port, tty, i, NULL); + tty_dev = tty_port_register_device_attr(&channel->tty_port, tty, + i, NULL, channel, NULL); if (IS_ERR(tty_dev)) { dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n"); tty_port_destroy(&channel->tty_port); continue; } - dev_set_drvdata(tty_dev, channel); } /* -- cgit From cd20d59291d1790dc74248476e928f57fc455189 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:46:19 +0200 Subject: ipack: ipoctal: fix tty-registration error handling Registration of the ipoctal tty devices is unlikely to fail, but if it ever does, make sure not to deregister a never registered tty device (and dereference a NULL pointer) when the driver is later unbound. Fixes: 2afb41d9d30d ("Staging: ipack/devices/ipoctal: Check tty_register_device return value.") Cc: stable@vger.kernel.org # 3.7 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/ipack/devices/ipoctal.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index 262451343127..d6875aa6a295 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -33,6 +33,7 @@ struct ipoctal_channel { unsigned int pointer_read; unsigned int pointer_write; struct tty_port tty_port; + bool tty_registered; union scc2698_channel __iomem *regs; union scc2698_block __iomem *block_regs; unsigned int board_id; @@ -396,9 +397,11 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, i, NULL, channel, NULL); if (IS_ERR(tty_dev)) { dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n"); + tty_port_free_xmit_buf(&channel->tty_port); tty_port_destroy(&channel->tty_port); continue; } + channel->tty_registered = true; } /* @@ -698,6 +701,10 @@ static void __ipoctal_remove(struct ipoctal *ipoctal) for (i = 0; i < NR_CHANNELS; i++) { struct ipoctal_channel *channel = &ipoctal->channel[i]; + + if (!channel->tty_registered) + continue; + tty_unregister_device(ipoctal->tty_drv, i); tty_port_free_xmit_buf(&channel->tty_port); tty_port_destroy(&channel->tty_port); -- cgit From 445c8132727728dc297492a7d9fc074af3e94ba3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:46:20 +0200 Subject: ipack: ipoctal: fix missing allocation-failure check Add the missing error handling when allocating the transmit buffer to avoid dereferencing a NULL pointer in write() should the allocation ever fail. Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board") Cc: stable@vger.kernel.org # 3.5 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/ipack/devices/ipoctal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index d6875aa6a295..61c41f535510 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -385,7 +385,9 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, channel = &ipoctal->channel[i]; tty_port_init(&channel->tty_port); - tty_port_alloc_xmit_buf(&channel->tty_port); + res = tty_port_alloc_xmit_buf(&channel->tty_port); + if (res) + continue; channel->tty_port.ops = &ipoctal_tty_port_ops; ipoctal_reset_stats(&channel->stats); -- cgit From bb8a4fcb2136508224c596a7e665bdba1d7c3c27 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Sep 2021 13:46:21 +0200 Subject: ipack: ipoctal: fix module reference leak A reference to the carrier module was taken on every open but was only released once when the final reference to the tty struct was dropped. Fix this by taking the module reference and initialising the tty driver data when installing the tty. Fixes: 82a82340bab6 ("ipoctal: get carrier driver to avoid rmmod") Cc: stable@vger.kernel.org # 3.18 Cc: Federico Vaga Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/ipack/devices/ipoctal.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index 61c41f535510..c709861198e5 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -82,22 +82,34 @@ static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty) return 0; } -static int ipoctal_open(struct tty_struct *tty, struct file *file) +static int ipoctal_install(struct tty_driver *driver, struct tty_struct *tty) { struct ipoctal_channel *channel = dev_get_drvdata(tty->dev); struct ipoctal *ipoctal = chan_to_ipoctal(channel, tty->index); - int err; - - tty->driver_data = channel; + int res; if (!ipack_get_carrier(ipoctal->dev)) return -EBUSY; - err = tty_port_open(&channel->tty_port, tty, file); - if (err) - ipack_put_carrier(ipoctal->dev); + res = tty_standard_install(driver, tty); + if (res) + goto err_put_carrier; + + tty->driver_data = channel; + + return 0; + +err_put_carrier: + ipack_put_carrier(ipoctal->dev); + + return res; +} + +static int ipoctal_open(struct tty_struct *tty, struct file *file) +{ + struct ipoctal_channel *channel = tty->driver_data; - return err; + return tty_port_open(&channel->tty_port, tty, file); } static void ipoctal_reset_stats(struct ipoctal_stats *stats) @@ -661,6 +673,7 @@ static void ipoctal_cleanup(struct tty_struct *tty) static const struct tty_operations ipoctal_fops = { .ioctl = NULL, + .install = ipoctal_install, .open = ipoctal_open, .close = ipoctal_close, .write = ipoctal_write_tty, -- cgit From 4329c8dc110b25d5f04ed20c6821bb60deff279f Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 8 Sep 2021 10:52:36 -0700 Subject: e100: fix length calculation in e100_get_regs_len commit abf9b902059f ("e100: cleanup unneeded math") tried to simplify e100_get_regs_len and remove a double 'divide and then multiply' calculation that the e100_reg_regs_len function did. This change broke the size calculation entirely as it failed to account for the fact that the numbered registers are actually 4 bytes wide and not 1 byte. This resulted in a significant under allocation of the register buffer used by e100_get_regs. Fix this by properly multiplying the register count by u32 first before adding the size of the dump buffer. Fixes: abf9b902059f ("e100: cleanup unneeded math") Reported-by: Felicitas Hetzelt Signed-off-by: Jacob Keller Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e100.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index 373eb027b925..588a59546d12 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -2441,7 +2441,11 @@ static void e100_get_drvinfo(struct net_device *netdev, static int e100_get_regs_len(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); - return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf); + + /* We know the number of registers, and the size of the dump buffer. + * Calculate the total size in bytes. + */ + return (1 + E100_PHY_REGS) * sizeof(u32) + sizeof(nic->mem->dump_buf); } static void e100_get_regs(struct net_device *netdev, -- cgit From 51032e6f17ce990d06123ad7307f258c50d25aa7 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 8 Sep 2021 10:52:37 -0700 Subject: e100: fix buffer overrun in e100_get_regs The e100_get_regs function is used to implement a simple register dump for the e100 device. The data is broken into a couple of MAC control registers, and then a series of PHY registers, followed by a memory dump buffer. The total length of the register dump is defined as (1 + E100_PHY_REGS) * sizeof(u32) + sizeof(nic->mem->dump_buf). The logic for filling in the PHY registers uses a convoluted inverted count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This is actually one more than the supposed number of PHY registers. The memory dump buffer is then filled into the space at [2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past the total size. The end result is that we overrun the total buffer size allocated by the kernel, which could lead to a panic or other issues due to memory corruption. It is difficult to determine the actual total number of registers here. The only 8255x datasheet I could find indicates there are 28 total MDI registers. However, we're reading 29 here, and reading them in reverse! In addition, the ethtool e100 register dump interface appears to read the first PHY register to determine if the device is in MDI or MDIx mode. This doesn't appear to be documented anywhere within the 8255x datasheet. I can only assume it must be in register 28 (the extra register we're reading here). Lets not change any of the intended meaning of what we copy here. Just extend the space by 4 bytes to account for the extra register and continue copying the data out in the same order. Change the E100_PHY_REGS value to be the correct total (29) so that the total register dump size is calculated properly. Fix the offset for where we copy the dump buffer so that it doesn't overrun the total size. Re-write the for loop to use counting up instead of the convoluted down-counting. Correct the mdio_read offset to use the 0-based register offsets, but maintain the bizarre reverse ordering so that we have the ABI expected by applications like ethtool. This requires and additional subtraction of 1. It seems a bit odd but it makes the flow of assignment into the register buffer easier to follow. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Felicitas Hetzelt Signed-off-by: Jacob Keller Tested-by: Jacob Keller Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e100.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index 588a59546d12..09ae1939e6db 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -2437,7 +2437,7 @@ static void e100_get_drvinfo(struct net_device *netdev, sizeof(info->bus_info)); } -#define E100_PHY_REGS 0x1C +#define E100_PHY_REGS 0x1D static int e100_get_regs_len(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); @@ -2459,14 +2459,18 @@ static void e100_get_regs(struct net_device *netdev, buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 | ioread8(&nic->csr->scb.cmd_lo) << 16 | ioread16(&nic->csr->scb.status); - for (i = E100_PHY_REGS; i >= 0; i--) - buff[1 + E100_PHY_REGS - i] = - mdio_read(netdev, nic->mii.phy_id, i); + for (i = 0; i < E100_PHY_REGS; i++) + /* Note that we read the registers in reverse order. This + * ordering is the ABI apparently used by ethtool and other + * applications. + */ + buff[1 + i] = mdio_read(netdev, nic->mii.phy_id, + E100_PHY_REGS - 1 - i); memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf)); e100_exec_cb(nic, NULL, e100_dump); msleep(10); - memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf, - sizeof(nic->mem->dump_buf)); + memcpy(&buff[1 + E100_PHY_REGS], nic->mem->dump_buf, + sizeof(nic->mem->dump_buf)); } static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) -- cgit From a2941f6aa71a72be2c82c0a168523a492d093530 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Mon, 27 Sep 2021 08:43:06 -0700 Subject: nvme: add command id quirk for apple controllers Some apple controllers use the command id as an index to implementation specific data structures and will fail if the value is out of bounds. The nvme driver's recently introduced command sequence number breaks this controller. Provide a quirk so these spec incompliant controllers can function as before. The driver will not have the ability to detect bad completions when this quirk is used, but we weren't previously checking this anyway. The quirk bit was selected so that it can readily apply to stable. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214509 Cc: Sven Peter Reported-by: Orlando Chamberlain Reported-by: Aditya Garg Signed-off-by: Keith Busch Reviewed-by: Christoph Hellwig Tested-by: Sven Peter Link: https://lore.kernel.org/r/20210927154306.387437-1-kbusch@kernel.org Signed-off-by: Jens Axboe --- drivers/nvme/host/core.c | 4 +++- drivers/nvme/host/nvme.h | 6 ++++++ drivers/nvme/host/pci.c | 3 ++- 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index e486845d2c7e..7712a8f78337 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -978,6 +978,7 @@ EXPORT_SYMBOL_GPL(nvme_cleanup_cmd); blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req) { struct nvme_command *cmd = nvme_req(req)->cmd; + struct nvme_ctrl *ctrl = nvme_req(req)->ctrl; blk_status_t ret = BLK_STS_OK; if (!(req->rq_flags & RQF_DONTPREP)) { @@ -1026,7 +1027,8 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req) return BLK_STS_IOERR; } - nvme_req(req)->genctr++; + if (!(ctrl->quirks & NVME_QUIRK_SKIP_CID_GEN)) + nvme_req(req)->genctr++; cmd->common.command_id = nvme_cid(req); trace_nvme_setup_cmd(req, cmd); return ret; diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 9871c0c9374c..ed79a6c7e804 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -138,6 +138,12 @@ enum nvme_quirks { * 48 bits. */ NVME_QUIRK_DMA_ADDRESS_BITS_48 = (1 << 16), + + /* + * The controller requires the command_id value be be limited, so skip + * encoding the generation sequence number. + */ + NVME_QUIRK_SKIP_CID_GEN = (1 << 17), }; /* diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index b82492cd7503..456a0e8a5718 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3369,7 +3369,8 @@ static const struct pci_device_id nvme_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2005), .driver_data = NVME_QUIRK_SINGLE_VECTOR | NVME_QUIRK_128_BYTES_SQES | - NVME_QUIRK_SHARED_TAGS }, + NVME_QUIRK_SHARED_TAGS | + NVME_QUIRK_SKIP_CID_GEN }, { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) }, { 0, } -- cgit From 78f8876c2d9f6fdeb9ff62ed1911505156cd7b3d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 27 Sep 2021 10:04:10 -0600 Subject: io-wq: exclusively gate signal based exit on get_signal() return io-wq threads block all signals, except SIGKILL and SIGSTOP. We should not need any extra checking of signal_pending or fatal_signal_pending, rely exclusively on whether or not get_signal() tells us to exit. The original debugging of this issue led to the false positive that we were exiting on non-fatal signals, but that is not the case. The issue was around races with nr_workers accounting. Fixes: 87c169665578 ("io-wq: ensure we exit if thread group is exiting") Fixes: 15e20db2e0ce ("io-wq: only exit on fatal signals") Reported-by: Eric W. Biederman Reported-by: Linus Torvalds Acked-by: "Eric W. Biederman" Signed-off-by: Jens Axboe --- fs/io-wq.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/io-wq.c b/fs/io-wq.c index c2360cdc403d..5bf8aa81715e 100644 --- a/fs/io-wq.c +++ b/fs/io-wq.c @@ -584,10 +584,7 @@ loop: if (!get_signal(&ksig)) continue; - if (fatal_signal_pending(current) || - signal_group_exit(current->signal)) - break; - continue; + break; } last_timeout = !ret; } -- cgit From 7d5cfafe8b4006a75b55c2f1fdfdb363f9a5cc98 Mon Sep 17 00:00:00 2001 From: Guo Zhi Date: Wed, 22 Sep 2021 21:48:57 +0800 Subject: RDMA/hfi1: Fix kernel pointer leak Pointers should be printed with %p or %px rather than cast to 'unsigned long long' and printed with %llx. Change %llx to %p to print the secured pointer. Fixes: 042a00f93aad ("IB/{ipoib,hfi1}: Add a timeout handler for rdma_netdev") Link: https://lore.kernel.org/r/20210922134857.619602-1-qtxuning1999@sjtu.edu.cn Signed-off-by: Guo Zhi Acked-by: Mike Marciniszyn Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/ipoib_tx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/ipoib_tx.c b/drivers/infiniband/hw/hfi1/ipoib_tx.c index e74ddbe46589..15b0cb0f363f 100644 --- a/drivers/infiniband/hw/hfi1/ipoib_tx.c +++ b/drivers/infiniband/hw/hfi1/ipoib_tx.c @@ -876,14 +876,14 @@ void hfi1_ipoib_tx_timeout(struct net_device *dev, unsigned int q) struct hfi1_ipoib_txq *txq = &priv->txqs[q]; u64 completed = atomic64_read(&txq->complete_txreqs); - dd_dev_info(priv->dd, "timeout txq %llx q %u stopped %u stops %d no_desc %d ring_full %d\n", - (unsigned long long)txq, q, + dd_dev_info(priv->dd, "timeout txq %p q %u stopped %u stops %d no_desc %d ring_full %d\n", + txq, q, __netif_subqueue_stopped(dev, txq->q_idx), atomic_read(&txq->stops), atomic_read(&txq->no_desc), atomic_read(&txq->ring_full)); - dd_dev_info(priv->dd, "sde %llx engine %u\n", - (unsigned long long)txq->sde, + dd_dev_info(priv->dd, "sde %p engine %u\n", + txq->sde, txq->sde ? txq->sde->this_idx : 0); dd_dev_info(priv->dd, "flow %x\n", txq->flow.as_int); dd_dev_info(priv->dd, "sent %llu completed %llu used %llu\n", -- cgit From cc26aee100588a3f293921342a307b6309ace193 Mon Sep 17 00:00:00 2001 From: Wenpeng Liang Date: Mon, 27 Sep 2021 20:55:56 +0800 Subject: RDMA/hns: Fix the size setting error when copying CQE in clean_cq() The size of CQE is different for different versions of hardware, so the driver needs to specify the size of CQE explicitly. Fixes: 09a5f210f67e ("RDMA/hns: Add support for CQE in size of 64 Bytes") Link: https://lore.kernel.org/r/20210927125557.15031-2-liangwenpeng@huawei.com Signed-off-by: Wenpeng Liang Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index a9c00a2e8ebd..d5f3faa1627a 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -3299,7 +3299,7 @@ static void __hns_roce_v2_cq_clean(struct hns_roce_cq *hr_cq, u32 qpn, dest = get_cqe_v2(hr_cq, (prod_index + nfreed) & hr_cq->ib_cq.cqe); owner_bit = hr_reg_read(dest, CQE_OWNER); - memcpy(dest, cqe, sizeof(*cqe)); + memcpy(dest, cqe, hr_cq->cqe_size); hr_reg_write(dest, CQE_OWNER, owner_bit); } } -- cgit From e671f0ecfece14940a9bb81981098910ea278cf7 Mon Sep 17 00:00:00 2001 From: Wenpeng Liang Date: Mon, 27 Sep 2021 20:55:57 +0800 Subject: RDMA/hns: Add the check of the CQE size of the user space If the CQE size of the user space is not the size supported by the hardware, the creation of CQ should be stopped. Fixes: 09a5f210f67e ("RDMA/hns: Add support for CQE in size of 64 Bytes") Link: https://lore.kernel.org/r/20210927125557.15031-3-liangwenpeng@huawei.com Signed-off-by: Wenpeng Liang Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_cq.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_cq.c b/drivers/infiniband/hw/hns/hns_roce_cq.c index 1e9c3c5bee68..d763f097599f 100644 --- a/drivers/infiniband/hw/hns/hns_roce_cq.c +++ b/drivers/infiniband/hw/hns/hns_roce_cq.c @@ -326,19 +326,30 @@ static void set_cq_param(struct hns_roce_cq *hr_cq, u32 cq_entries, int vector, INIT_LIST_HEAD(&hr_cq->rq_list); } -static void set_cqe_size(struct hns_roce_cq *hr_cq, struct ib_udata *udata, - struct hns_roce_ib_create_cq *ucmd) +static int set_cqe_size(struct hns_roce_cq *hr_cq, struct ib_udata *udata, + struct hns_roce_ib_create_cq *ucmd) { struct hns_roce_dev *hr_dev = to_hr_dev(hr_cq->ib_cq.device); - if (udata) { - if (udata->inlen >= offsetofend(typeof(*ucmd), cqe_size)) - hr_cq->cqe_size = ucmd->cqe_size; - else - hr_cq->cqe_size = HNS_ROCE_V2_CQE_SIZE; - } else { + if (!udata) { hr_cq->cqe_size = hr_dev->caps.cqe_sz; + return 0; + } + + if (udata->inlen >= offsetofend(typeof(*ucmd), cqe_size)) { + if (ucmd->cqe_size != HNS_ROCE_V2_CQE_SIZE && + ucmd->cqe_size != HNS_ROCE_V3_CQE_SIZE) { + ibdev_err(&hr_dev->ib_dev, + "invalid cqe size %u.\n", ucmd->cqe_size); + return -EINVAL; + } + + hr_cq->cqe_size = ucmd->cqe_size; + } else { + hr_cq->cqe_size = HNS_ROCE_V2_CQE_SIZE; } + + return 0; } int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr, @@ -366,7 +377,9 @@ int hns_roce_create_cq(struct ib_cq *ib_cq, const struct ib_cq_init_attr *attr, set_cq_param(hr_cq, attr->cqe, attr->comp_vector, &ucmd); - set_cqe_size(hr_cq, udata, &ucmd); + ret = set_cqe_size(hr_cq, udata, &ucmd); + if (ret) + return ret; ret = alloc_cq_buf(hr_dev, hr_cq, udata, ucmd.buf_addr); if (ret) { -- cgit From 9b3b353ef330e20bc2d99bf3165cc044cff26a09 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 27 Sep 2021 11:26:21 -0700 Subject: vboxfs: fix broken legacy mount signature checking Commit 9d682ea6bcc7 ("vboxsf: Fix the check for the old binary mount-arguments struct") was meant to fix a build error due to sign mismatch in 'char' and the use of character constants, but it just moved the error elsewhere, in that on some architectures characters and signed and on others they are unsigned, and that's just how the C standard works. The proper fix is a simple "don't do that then". The code was just being silly and odd, and it should never have cared about signed vs unsigned characters in the first place, since what it is testing is not four "characters", but four bytes. And the way to compare four bytes is by using "memcmp()". Which compilers will know to just turn into a single 32-bit compare with a constant, as long as you don't have crazy debug options enabled. Link: https://lore.kernel.org/lkml/20210927094123.576521-1-arnd@kernel.org/ Cc: Arnd Bergmann Cc: Hans de Goede Signed-off-by: Linus Torvalds --- fs/vboxsf/super.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/fs/vboxsf/super.c b/fs/vboxsf/super.c index 4f5e59f06284..37dd3fe5b1e9 100644 --- a/fs/vboxsf/super.c +++ b/fs/vboxsf/super.c @@ -21,10 +21,7 @@ #define VBOXSF_SUPER_MAGIC 0x786f4256 /* 'VBox' little endian */ -#define VBSF_MOUNT_SIGNATURE_BYTE_0 ('\000') -#define VBSF_MOUNT_SIGNATURE_BYTE_1 ('\377') -#define VBSF_MOUNT_SIGNATURE_BYTE_2 ('\376') -#define VBSF_MOUNT_SIGNATURE_BYTE_3 ('\375') +static const unsigned char VBSF_MOUNT_SIGNATURE[4] = "\000\377\376\375"; static int follow_symlinks; module_param(follow_symlinks, int, 0444); @@ -386,12 +383,7 @@ fail_nomem: static int vboxsf_parse_monolithic(struct fs_context *fc, void *data) { - unsigned char *options = data; - - if (options && options[0] == VBSF_MOUNT_SIGNATURE_BYTE_0 && - options[1] == VBSF_MOUNT_SIGNATURE_BYTE_1 && - options[2] == VBSF_MOUNT_SIGNATURE_BYTE_2 && - options[3] == VBSF_MOUNT_SIGNATURE_BYTE_3) { + if (data && !memcmp(data, VBSF_MOUNT_SIGNATURE, 4)) { vbg_err("vboxsf: Old binary mount data not supported, remove obsolete mount.vboxsf and/or update your VBoxService.\n"); return -EINVAL; } -- cgit From f060db99374e80e853ac4916b49f0a903f65e9dc Mon Sep 17 00:00:00 2001 From: Jia He Date: Wed, 22 Sep 2021 23:29:19 +0800 Subject: ACPI: NFIT: Use fallback node id when numa info in NFIT table is incorrect When ACPI NFIT table is failing to populate correct numa information on arm64, dax_kmem will get NUMA_NO_NODE from the NFIT driver. Without this patch, pmem can't be probed as RAM devices on arm64 guest: $ndctl create-namespace -fe namespace0.0 --mode=devdax --map=dev -s 1g -a 128M kmem dax0.0: rejecting DAX region [mem 0x240400000-0x2bfffffff] with invalid node: -1 kmem: probe of dax0.0 failed with error -22 Suggested-by: Dan Williams Signed-off-by: Jia He Cc: Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM") Link: https://lore.kernel.org/r/20210922152919.6940-1-justin.he@arm.com Signed-off-by: Dan Williams --- drivers/acpi/nfit/core.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index a3ef6cce644c..7dd80acf92c7 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -3007,6 +3007,18 @@ static int acpi_nfit_register_region(struct acpi_nfit_desc *acpi_desc, ndr_desc->target_node = NUMA_NO_NODE; } + /* Fallback to address based numa information if node lookup failed */ + if (ndr_desc->numa_node == NUMA_NO_NODE) { + ndr_desc->numa_node = memory_add_physaddr_to_nid(spa->address); + dev_info(acpi_desc->dev, "changing numa node from %d to %d for nfit region [%pa-%pa]", + NUMA_NO_NODE, ndr_desc->numa_node, &res.start, &res.end); + } + if (ndr_desc->target_node == NUMA_NO_NODE) { + ndr_desc->target_node = phys_to_target_node(spa->address); + dev_info(acpi_desc->dev, "changing target node from %d to %d for nfit region [%pa-%pa]", + NUMA_NO_NODE, ndr_desc->numa_node, &res.start, &res.end); + } + /* * Persistence domain bits are hierarchical, if * ACPI_NFIT_CAPABILITY_CACHE_FLUSH is set then -- cgit From d55174cccac2e4c2a58ff68b6b573fc0836f73bd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 22 Sep 2021 19:34:29 +0200 Subject: nvdimm/pmem: fix creating the dax group The recent block layer refactoring broke the way how the pmem driver abused device_add_disk. Fix this by properly passing the attribute groups to device_add_disk. Fixes: 52b85909f85d ("block: fold register_disk into device_add_disk") Signed-off-by: Christoph Hellwig Reviewed-by: Ira Weiny Reviewed-by: Dan Williams Tested-by: Darrick J. Wong Link: https://lore.kernel.org/r/20210922173431.2454024-2-hch@lst.de Signed-off-by: Dan Williams --- drivers/nvdimm/pmem.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c index 72de88ff0d30..ef4950f80832 100644 --- a/drivers/nvdimm/pmem.c +++ b/drivers/nvdimm/pmem.c @@ -380,7 +380,6 @@ static int pmem_attach_disk(struct device *dev, struct nd_pfn_sb *pfn_sb; struct pmem_device *pmem; struct request_queue *q; - struct device *gendev; struct gendisk *disk; void *addr; int rc; @@ -489,10 +488,8 @@ static int pmem_attach_disk(struct device *dev, } dax_write_cache(dax_dev, nvdimm_has_cache(nd_region)); pmem->dax_dev = dax_dev; - gendev = disk_to_dev(disk); - gendev->groups = pmem_attribute_groups; - device_add_disk(dev, disk, NULL); + device_add_disk(dev, disk, pmem_attribute_groups); if (devm_add_action_or_reset(dev, pmem_release_disk, pmem)) return -ENOMEM; -- cgit From c388a18957efdf31db8e97ec4d2d4b7dc1ca9a44 Mon Sep 17 00:00:00 2001 From: Jackie Liu Date: Mon, 13 Sep 2021 15:32:20 +0800 Subject: watchdog/sb_watchdog: fix compilation problem due to COMPILE_TEST Compiling sb_watchdog needs to clearly define SIBYTE_HDR_FEATURES. In arch/mips/sibyte/Platform like: cflags-$(CONFIG_SIBYTE_BCM112X) += \ -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL Otherwise, SIBYTE_HDR_FEATURES is SIBYTE_HDR_FMASK_ALL. SIBYTE_HDR_FMASK_ALL is mean: #define SIBYTE_HDR_FMASK_ALL SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \ | SIBYTE_HDR_FMASK_1480_ALL) So, If not limited to CPU_SB1, we will get such an error: arch/mips/include/asm/sibyte/bcm1480_scd.h:261: error: "M_SPC_CFG_CLEAR" redefined [-Werror] arch/mips/include/asm/sibyte/bcm1480_scd.h:262: error: "M_SPC_CFG_ENABLE" redefined [-Werror] Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Jackie Liu Reviewed-by: Guenter Roeck Signed-off-by: Linus Torvalds --- drivers/watchdog/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index b81fe4f7d434..bf59faeb3de1 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -1666,7 +1666,7 @@ config WDT_MTX1 config SIBYTE_WDOG tristate "Sibyte SoC hardware watchdog" - depends on CPU_SB1 || (MIPS && COMPILE_TEST) + depends on CPU_SB1 help Watchdog driver for the built in watchdog hardware in Sibyte SoC processors. There are apparently two watchdog timers -- cgit From b8cf5584ec5b8c67359328b8b03b46657620f304 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Tue, 28 Sep 2021 15:04:04 +0900 Subject: MAINTAINERS: rename cifs_common to smbfs_common in cifs and ksmbd entry commit 23e91d8b7c5a("cifs: rename cifs_common to smbfs_common") cause the following warning from get_maintainer.pl. ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: fs/cifs_common/ This patch rename cifs_common to smbfs_common in cifs and ksmbd entry. Reported-by: Lukas Bulwahn Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5b33791bb8e9..8a8c0e6eb458 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4655,7 +4655,7 @@ W: http://linux-cifs.samba.org/ T: git git://git.samba.org/sfrench/cifs-2.6.git F: Documentation/admin-guide/cifs/ F: fs/cifs/ -F: fs/cifs_common/ +F: fs/smbfs_common/ COMPACTPCI HOTPLUG CORE M: Scott Murray @@ -10193,8 +10193,8 @@ M: Hyunchul Lee L: linux-cifs@vger.kernel.org S: Maintained T: git git://git.samba.org/ksmbd.git -F: fs/cifs_common/ F: fs/ksmbd/ +F: fs/smbfs_common/ KERNEL UNIT TESTING FRAMEWORK (KUnit) M: Brendan Higgins -- cgit From 8a98ae12fbefdb583a7696de719a1d57e5e940a2 Mon Sep 17 00:00:00 2001 From: Lorenz Bauer Date: Wed, 22 Sep 2021 12:11:52 +0100 Subject: bpf: Exempt CAP_BPF from checks against bpf_jit_limit When introducing CAP_BPF, bpf_jit_charge_modmem() was not changed to treat programs with CAP_BPF as privileged for the purpose of JIT memory allocation. This means that a program without CAP_BPF can block a program with CAP_BPF from loading a program. Fix this by checking bpf_capable() in bpf_jit_charge_modmem(). Fixes: 2c78ee898d8f ("bpf: Implement CAP_BPF") Signed-off-by: Lorenz Bauer Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20210922111153.19843-1-lmb@cloudflare.com --- kernel/bpf/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 9f4636d021b1..d6b7dfdd8066 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -827,7 +827,7 @@ int bpf_jit_charge_modmem(u32 pages) { if (atomic_long_add_return(pages, &bpf_jit_current) > (bpf_jit_limit >> PAGE_SHIFT)) { - if (!capable(CAP_SYS_ADMIN)) { + if (!bpf_capable()) { atomic_long_sub(pages, &bpf_jit_current); return -EPERM; } -- cgit From b3aa173d58b437cde5aae5fdce7071212628731b Mon Sep 17 00:00:00 2001 From: Dave Marchevsky Date: Fri, 24 Sep 2021 12:35:57 -0700 Subject: MAINTAINERS: Add btf headers to BPF BPF folks maintain these and they're not picked up by the current MAINTAINERS entries. Files caught by the added globs: include/linux/btf.h include/linux/btf_ids.h include/uapi/linux/btf.h Signed-off-by: Dave Marchevsky Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20210924193557.3081469-1-davemarchevsky@fb.com --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index a594d5d7edcc..d4122d36e627 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3379,9 +3379,11 @@ F: Documentation/networking/filter.rst F: Documentation/userspace-api/ebpf/ F: arch/*/net/* F: include/linux/bpf* +F: include/linux/btf* F: include/linux/filter.h F: include/trace/events/xdp.h F: include/uapi/linux/bpf* +F: include/uapi/linux/btf* F: include/uapi/linux/filter.h F: kernel/bpf/ F: kernel/trace/bpf_trace.c -- cgit From bcfd367c2839f2126c048fe59700ec1b538e2b06 Mon Sep 17 00:00:00 2001 From: Kumar Kartikeya Dwivedi Date: Fri, 24 Sep 2021 08:07:25 +0530 Subject: libbpf: Fix segfault in static linker for objects without BTF When a BPF object is compiled without BTF info (without -g), trying to link such objects using bpftool causes a SIGSEGV due to btf__get_nr_types accessing obj->btf which is NULL. Fix this by checking for the NULL pointer, and return error. Reproducer: $ cat a.bpf.c extern int foo(void); int bar(void) { return foo(); } $ cat b.bpf.c int foo(void) { return 0; } $ clang -O2 -target bpf -c a.bpf.c $ clang -O2 -target bpf -c b.bpf.c $ bpftool gen obj out a.bpf.o b.bpf.o Segmentation fault (core dumped) After fix: $ bpftool gen obj out a.bpf.o b.bpf.o libbpf: failed to find BTF info for object 'a.bpf.o' Error: failed to link 'a.bpf.o': Unknown error -22 (-22) Fixes: a46349227cd8 (libbpf: Add linker extern resolution support for functions and global variables) Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20210924023725.70228-1-memxor@gmail.com --- tools/lib/bpf/linker.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/lib/bpf/linker.c b/tools/lib/bpf/linker.c index 10911a8cad0f..2df880cefdae 100644 --- a/tools/lib/bpf/linker.c +++ b/tools/lib/bpf/linker.c @@ -1649,11 +1649,17 @@ static bool btf_is_non_static(const struct btf_type *t) static int find_glob_sym_btf(struct src_obj *obj, Elf64_Sym *sym, const char *sym_name, int *out_btf_sec_id, int *out_btf_id) { - int i, j, n = btf__get_nr_types(obj->btf), m, btf_id = 0; + int i, j, n, m, btf_id = 0; const struct btf_type *t; const struct btf_var_secinfo *vi; const char *name; + if (!obj->btf) { + pr_warn("failed to find BTF info for object '%s'\n", obj->filename); + return -EINVAL; + } + + n = btf__get_nr_types(obj->btf); for (i = 1; i <= n; i++) { t = btf__type_by_id(obj->btf, i); -- cgit From 78cc316e9583067884eb8bd154301dc1e9ee945c Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 27 Sep 2021 14:39:20 +0200 Subject: bpf, cgroup: Assign cgroup in cgroup_sk_alloc when called from interrupt If cgroup_sk_alloc() is called from interrupt context, then just assign the root cgroup to skcd->cgroup. Prior to commit 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") we would just return, and later on in sock_cgroup_ptr(), we were NULL-testing the cgroup in fast-path, and iff indeed NULL returning the root cgroup (v ?: &cgrp_dfl_root.cgrp). Rather than re-adding the NULL-test to the fast-path we can just assign it once from cgroup_sk_alloc() given v1/v2 handling has been simplified. The migration from NULL test with returning &cgrp_dfl_root.cgrp to assigning &cgrp_dfl_root.cgrp directly does /not/ change behavior for callers of sock_cgroup_ptr(). syzkaller was able to trigger a splat in the legacy netrom code base, where the RX handler in nr_rx_frame() calls nr_make_new() which calls sk_alloc() and therefore cgroup_sk_alloc() with in_interrupt() condition. Thus the NULL skcd->cgroup, where it trips over on cgroup_sk_free() side given it expects a non-NULL object. There are a few other candidates aside from netrom which have similar pattern where in their accept-like implementation, they just call to sk_alloc() and thus cgroup_sk_alloc() instead of sk_clone_lock() with the corresponding cgroup_sk_clone() which then inherits the cgroup from the parent socket. None of them are related to core protocols where BPF cgroup programs are running from. However, in future, they should follow to implement a similar inheritance mechanism. Additionally, with a !CONFIG_CGROUP_NET_PRIO and !CONFIG_CGROUP_NET_CLASSID configuration, the same issue was exposed also prior to 8520e224f547 due to commit e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") which added the early in_interrupt() return back then. Fixes: 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") Fixes: e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") Reported-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com Reported-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Tested-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com Tested-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com Acked-by: Tejun Heo Link: https://lore.kernel.org/bpf/20210927123921.21535-1-daniel@iogearbox.net --- kernel/cgroup/cgroup.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c index 8afa8690d288..570b0c97392a 100644 --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c @@ -6574,22 +6574,29 @@ int cgroup_parse_float(const char *input, unsigned dec_shift, s64 *v) void cgroup_sk_alloc(struct sock_cgroup_data *skcd) { - /* Don't associate the sock with unrelated interrupted task's cgroup. */ - if (in_interrupt()) - return; + struct cgroup *cgroup; rcu_read_lock(); + /* Don't associate the sock with unrelated interrupted task's cgroup. */ + if (in_interrupt()) { + cgroup = &cgrp_dfl_root.cgrp; + cgroup_get(cgroup); + goto out; + } + while (true) { struct css_set *cset; cset = task_css_set(current); if (likely(cgroup_tryget(cset->dfl_cgrp))) { - skcd->cgroup = cset->dfl_cgrp; - cgroup_bpf_get(cset->dfl_cgrp); + cgroup = cset->dfl_cgrp; break; } cpu_relax(); } +out: + skcd->cgroup = cgroup; + cgroup_bpf_get(cgroup); rcu_read_unlock(); } -- cgit From 435b08ec0094ac1e128afe6cfd0d9311a8c617a7 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 27 Sep 2021 14:39:21 +0200 Subject: bpf, test, cgroup: Use sk_{alloc,free} for test cases BPF test infra has some hacks in place which kzalloc() a socket and perform minimum init via sock_net_set() and sock_init_data(). As a result, the sk's skcd->cgroup is NULL since it didn't go through proper initialization as it would have been the case from sk_alloc(). Rather than re-adding a NULL test in sock_cgroup_ptr() just for this, use sk_{alloc,free}() pair for the test socket. The latter also allows to get rid of the bpf_sk_storage_free() special case. Fixes: 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") Fixes: b7a1848e8398 ("bpf: add BPF_PROG_TEST_RUN support for flow dissector") Fixes: 2cb494a36c98 ("bpf: add tests for direct packet access from CGROUP_SKB") Reported-by: syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com Reported-by: syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Tested-by: syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com Tested-by: syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com Link: https://lore.kernel.org/bpf/20210927123921.21535-2-daniel@iogearbox.net --- net/bpf/test_run.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c index 2eb0e55ef54d..b5f4ef35357c 100644 --- a/net/bpf/test_run.c +++ b/net/bpf/test_run.c @@ -552,6 +552,12 @@ static void convert_skb_to___skb(struct sk_buff *skb, struct __sk_buff *__skb) __skb->gso_segs = skb_shinfo(skb)->gso_segs; } +static struct proto bpf_dummy_proto = { + .name = "bpf_dummy", + .owner = THIS_MODULE, + .obj_size = sizeof(struct sock), +}; + int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, union bpf_attr __user *uattr) { @@ -596,20 +602,19 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, break; } - sk = kzalloc(sizeof(struct sock), GFP_USER); + sk = sk_alloc(net, AF_UNSPEC, GFP_USER, &bpf_dummy_proto, 1); if (!sk) { kfree(data); kfree(ctx); return -ENOMEM; } - sock_net_set(sk, net); sock_init_data(NULL, sk); skb = build_skb(data, 0); if (!skb) { kfree(data); kfree(ctx); - kfree(sk); + sk_free(sk); return -ENOMEM; } skb->sk = sk; @@ -682,8 +687,7 @@ out: if (dev && dev != net->loopback_dev) dev_put(dev); kfree_skb(skb); - bpf_sk_storage_free(sk); - kfree(sk); + sk_free(sk); kfree(ctx); return ret; } -- cgit From d888eaac4fb1df30320bb1305a8f78efe86524c6 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Mon, 27 Sep 2021 18:01:36 +0200 Subject: selftests, bpf: Fix makefile dependencies on libbpf When building bpf selftest with make -j, I'm randomly getting build failures such as this one: In file included from progs/bpf_flow.c:19: [...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found #include "bpf_helper_defs.h" ^~~~~~~~~~~~~~~~~~~ The file that fails the build varies between runs but it's always in the progs/ subdir. The reason is a missing make dependency on libbpf for the .o files in progs/. There was a dependency before commit 3ac2e20fba07e but that commit removed it to prevent unneeded rebuilds. However, that only works if libbpf has been built already; the 'wildcard' prerequisite does not trigger when there's no bpf_helper_defs.h generated yet. Keep the libbpf as an order-only prerequisite to satisfy both goals. It is always built before the progs/ objects but it does not trigger unnecessary rebuilds by itself. Fixes: 3ac2e20fba07e ("selftests/bpf: BPF object files should depend only on libbpf headers") Signed-off-by: Jiri Benc Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com --- tools/testing/selftests/bpf/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 866531c08e4f..799b88152e9e 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -375,7 +375,8 @@ $(TRUNNER_BPF_OBJS): $(TRUNNER_OUTPUT)/%.o: \ $(TRUNNER_BPF_PROGS_DIR)/%.c \ $(TRUNNER_BPF_PROGS_DIR)/*.h \ $$(INCLUDE_DIR)/vmlinux.h \ - $(wildcard $(BPFDIR)/bpf_*.h) | $(TRUNNER_OUTPUT) + $(wildcard $(BPFDIR)/bpf_*.h) \ + | $(TRUNNER_OUTPUT) $$(BPFOBJ) $$(call $(TRUNNER_BPF_BUILD_RULE),$$<,$$@, \ $(TRUNNER_BPF_CFLAGS)) -- cgit From 79e2c306667542b8ee2d9a9d947eadc7039f0a3c Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Thu, 23 Sep 2021 10:40:22 +0200 Subject: selftests, bpf: test_lwt_ip_encap: Really disable rp_filter It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override a greater rp_filter value on the individual interfaces. We also need to set net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way, they'll also get their own rp_filter value of zero. Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest") Signed-off-by: Jiri Benc Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/b1cdd9d469f09ea6e01e9c89a6071c79b7380f89.1632386362.git.jbenc@redhat.com --- tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh index 59ea56945e6c..b497bb85b667 100755 --- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh +++ b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh @@ -112,6 +112,14 @@ setup() ip netns add "${NS2}" ip netns add "${NS3}" + # rp_filter gets confused by what these tests are doing, so disable it + ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0 + ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0 + ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0 + ip netns exec ${NS1} sysctl -wq net.ipv4.conf.default.rp_filter=0 + ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0 + ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0 + ip link add veth1 type veth peer name veth2 ip link add veth3 type veth peer name veth4 ip link add veth5 type veth peer name veth6 @@ -236,11 +244,6 @@ setup() ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ${VRF} ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} ${VRF} - # rp_filter gets confused by what these tests are doing, so disable it - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0 - TMPFILE=$(mktemp /tmp/test_lwt_ip_encap.XXXXXX) sleep 1 # reduce flakiness -- cgit From 68223eeec70898cd5e42451a9168cd9b2808e248 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:28:05 -0700 Subject: driver core: Set deferred probe reason when deferred by driver core When the driver core defers the probe of a device, set the deferred probe reason so that it's easier to debug. The deferred probe reason is available in debugfs under devices_deferred. Reviewed-by: Geert Uytterhoeven Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915172808.620546-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 21d4cb5d3767..bf008040b101 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -975,6 +975,7 @@ int device_links_check_suppliers(struct device *dev) { struct device_link *link; int ret = 0; + struct fwnode_handle *sup_fw; /* * Device waiting for supplier to become available is not allowed to @@ -983,10 +984,11 @@ int device_links_check_suppliers(struct device *dev) mutex_lock(&fwnode_link_lock); if (dev->fwnode && !list_empty(&dev->fwnode->suppliers) && !fw_devlink_is_permissive()) { - dev_dbg(dev, "probe deferral - wait for supplier %pfwP\n", - list_first_entry(&dev->fwnode->suppliers, - struct fwnode_link, - c_hook)->supplier); + sup_fw = list_first_entry(&dev->fwnode->suppliers, + struct fwnode_link, + c_hook)->supplier; + dev_err_probe(dev, -EPROBE_DEFER, "wait for supplier %pfwP\n", + sup_fw); mutex_unlock(&fwnode_link_lock); return -EPROBE_DEFER; } @@ -1001,8 +1003,9 @@ int device_links_check_suppliers(struct device *dev) if (link->status != DL_STATE_AVAILABLE && !(link->flags & DL_FLAG_SYNC_STATE_ONLY)) { device_links_missing_supplier(dev); - dev_dbg(dev, "probe deferral - supplier %s not ready\n", - dev_name(link->supplier)); + dev_err_probe(dev, -EPROBE_DEFER, + "supplier %s not ready\n", + dev_name(link->supplier)); ret = -EPROBE_DEFER; break; } -- cgit From 76f130810b477243ce1312bf5754dc41ce7f91a8 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:28:06 -0700 Subject: driver core: Create __fwnode_link_del() helper function The same code is repeated in multiple locations. Create a helper function for it. Reviewed-by: Geert Uytterhoeven Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915172808.620546-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index bf008040b101..e215220545f8 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -101,6 +101,19 @@ out: return ret; } +/** + * __fwnode_link_del - Delete a link between two fwnode_handles. + * @link: the fwnode_link to be deleted + * + * The fwnode_link_lock needs to be held when this function is called. + */ +static void __fwnode_link_del(struct fwnode_link *link) +{ + list_del(&link->s_hook); + list_del(&link->c_hook); + kfree(link); +} + /** * fwnode_links_purge_suppliers - Delete all supplier links of fwnode_handle. * @fwnode: fwnode whose supplier links need to be deleted @@ -112,11 +125,8 @@ static void fwnode_links_purge_suppliers(struct fwnode_handle *fwnode) struct fwnode_link *link, *tmp; mutex_lock(&fwnode_link_lock); - list_for_each_entry_safe(link, tmp, &fwnode->suppliers, c_hook) { - list_del(&link->s_hook); - list_del(&link->c_hook); - kfree(link); - } + list_for_each_entry_safe(link, tmp, &fwnode->suppliers, c_hook) + __fwnode_link_del(link); mutex_unlock(&fwnode_link_lock); } @@ -131,11 +141,8 @@ static void fwnode_links_purge_consumers(struct fwnode_handle *fwnode) struct fwnode_link *link, *tmp; mutex_lock(&fwnode_link_lock); - list_for_each_entry_safe(link, tmp, &fwnode->consumers, s_hook) { - list_del(&link->s_hook); - list_del(&link->c_hook); - kfree(link); - } + list_for_each_entry_safe(link, tmp, &fwnode->consumers, s_hook) + __fwnode_link_del(link); mutex_unlock(&fwnode_link_lock); } @@ -1887,9 +1894,7 @@ static void __fw_devlink_link_to_consumers(struct device *dev) if (!own_link || ret == -EAGAIN) continue; - list_del(&link->s_hook); - list_del(&link->c_hook); - kfree(link); + __fwnode_link_del(link); } } @@ -1941,9 +1946,7 @@ static void __fw_devlink_link_to_suppliers(struct device *dev, if (!own_link || ret == -EAGAIN) continue; - list_del(&link->s_hook); - list_del(&link->c_hook); - kfree(link); + __fwnode_link_del(link); /* If no device link was created, nothing more to do. */ if (ret) -- cgit From ebd6823af378c7d91f80cbe83ce07b5f166744e4 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 15 Sep 2021 10:28:07 -0700 Subject: driver core: Add debug logs when fwnode links are added/deleted This will help with debugging fw_devlink issues. Reviewed-by: Geert Uytterhoeven Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210915172808.620546-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/base/core.c b/drivers/base/core.c index e215220545f8..15986cc2fe5e 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -95,6 +95,8 @@ int fwnode_link_add(struct fwnode_handle *con, struct fwnode_handle *sup) list_add(&link->s_hook, &sup->consumers); list_add(&link->c_hook, &con->suppliers); + pr_debug("%pfwP Linked as a fwnode consumer to %pfwP\n", + con, sup); out: mutex_unlock(&fwnode_link_lock); @@ -109,6 +111,8 @@ out: */ static void __fwnode_link_del(struct fwnode_link *link) { + pr_debug("%pfwP Dropping the fwnode link to %pfwP\n", + link->consumer, link->supplier); list_del(&link->s_hook); list_del(&link->c_hook); kfree(link); -- cgit From f2ff7147c6834f244b8ce636b12e71a3bd044629 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 23 Sep 2021 18:04:25 +0200 Subject: ALSA: pcsp: Make hrtimer forwarding more robust The hrtimer callback pcsp_do_timer() prepares rearming of the timer with hrtimer_forward(). hrtimer_forward() is intended to provide a mechanism to forward the expiry time of the hrtimer by a multiple of the period argument so that the expiry time greater than the time provided in the 'now' argument. pcsp_do_timer() invokes hrtimer_forward() with the current timer expiry time as 'now' argument. That's providing a periodic timer expiry, but is not really robust when the timer callback is delayed so that the resulting new expiry time is already in the past which causes the callback to be invoked immediately again. If the timer is delayed then the back to back invocation is not really making it better than skipping the missed periods. Sound is distorted in any case. Use hrtimer_forward_now() which ensures that the next expiry is in the future. This prevents hogging the CPU in the timer expiry code and allows later on to remove hrtimer_forward() from the public interfaces. Signed-off-by: Thomas Gleixner Cc: alsa-devel@alsa-project.org Cc: Takashi Iwai Cc: Jaroslav Kysela Link: https://lore.kernel.org/r/20210923153339.623208460@linutronix.de Signed-off-by: Takashi Iwai --- sound/drivers/pcsp/pcsp_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/drivers/pcsp/pcsp_lib.c b/sound/drivers/pcsp/pcsp_lib.c index ed40d0f7432c..773db4bf0876 100644 --- a/sound/drivers/pcsp/pcsp_lib.c +++ b/sound/drivers/pcsp/pcsp_lib.c @@ -143,7 +143,7 @@ enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle) if (pointer_update) pcsp_pointer_update(chip); - hrtimer_forward(handle, hrtimer_get_expires(handle), ns_to_ktime(ns)); + hrtimer_forward_now(handle, ns_to_ktime(ns)); return HRTIMER_RESTART; } -- cgit From 6f87d4e637327b1da3294a7cdad60d49faa32742 Mon Sep 17 00:00:00 2001 From: Sven Peter Date: Tue, 21 Sep 2021 17:39:34 +0200 Subject: iommu/dart: Remove iommu_flush_ops apple_dart_tlb_flush_{all,walk} expect to get a struct apple_dart_domain but instead get a struct iommu_domain right now. This breaks those two functions and can lead to kernel panics like the one below. DART can only invalidate the entire TLB and apple_dart_iotlb_sync will already flush everything. There's no need to do that again inside those two functions. Let's just drop them. pci 0000:03:00.0: Removing from iommu group 1 Unable to handle kernel paging request at virtual address 0000000100000023 [...] Call trace: _raw_spin_lock_irqsave+0x54/0xbc apple_dart_hw_stream_command.constprop.0+0x2c/0x130 apple_dart_tlb_flush_all+0x48/0x90 free_io_pgtable_ops+0x40/0x70 apple_dart_domain_free+0x2c/0x44 iommu_group_release+0x68/0xac kobject_cleanup+0x4c/0x1fc kobject_cleanup+0x14c/0x1fc kobject_put+0x64/0x84 iommu_group_remove_device+0x110/0x180 iommu_release_device+0x50/0xa0 [...] Fixes: 46d1fb072e76b161 ("iommu/dart: Add DART iommu driver") Reported-by: Marc Zyngier Signed-off-by: Sven Peter Acked-by: Marc Zyngier Tested-by: Marc Zyngier Link: https://lore.kernel.org/r/20210921153934.35647-1-sven@svenpeter.dev Signed-off-by: Joerg Roedel --- drivers/iommu/apple-dart.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c index 559db9259e65..bc0d9c363184 100644 --- a/drivers/iommu/apple-dart.c +++ b/drivers/iommu/apple-dart.c @@ -183,7 +183,6 @@ struct apple_dart_master_cfg { static struct platform_driver apple_dart_driver; static const struct iommu_ops apple_dart_iommu_ops; -static const struct iommu_flush_ops apple_dart_tlb_ops; static struct apple_dart_domain *to_dart_domain(struct iommu_domain *dom) { @@ -338,22 +337,6 @@ static void apple_dart_iotlb_sync_map(struct iommu_domain *domain, apple_dart_domain_flush_tlb(to_dart_domain(domain)); } -static void apple_dart_tlb_flush_all(void *cookie) -{ - apple_dart_domain_flush_tlb(cookie); -} - -static void apple_dart_tlb_flush_walk(unsigned long iova, size_t size, - size_t granule, void *cookie) -{ - apple_dart_domain_flush_tlb(cookie); -} - -static const struct iommu_flush_ops apple_dart_tlb_ops = { - .tlb_flush_all = apple_dart_tlb_flush_all, - .tlb_flush_walk = apple_dart_tlb_flush_walk, -}; - static phys_addr_t apple_dart_iova_to_phys(struct iommu_domain *domain, dma_addr_t iova) { @@ -435,7 +418,6 @@ static int apple_dart_finalize_domain(struct iommu_domain *domain, .ias = 32, .oas = 36, .coherent_walk = 1, - .tlb = &apple_dart_tlb_ops, .iommu_dev = dart->dev, }; -- cgit From 0b482d0c75bf321b2fd87d215c3d6df095a601d1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 22 Sep 2021 13:47:26 +0800 Subject: iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses 719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") changed the DMA fault reason from hex to decimal. It also added "0x" prefixes to the PCI bus/device, e.g., - DMAR: [INTR-REMAP] Request device [00:00.5] + DMAR: [INTR-REMAP] Request device [0x00:0x00.5] These no longer match dev_printk() and other similar messages in dmar_match_pci_path() and dmar_acpi_insert_dev_scope(). Drop the "0x" prefixes from the bus and device addresses. Fixes: 719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") Signed-off-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20210903193711.483999-1-helgaas@kernel.org Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20210922054726.499110-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/dmar.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c index 0ec5514c9980..b7708b93f3fa 100644 --- a/drivers/iommu/intel/dmar.c +++ b/drivers/iommu/intel/dmar.c @@ -1942,18 +1942,18 @@ static int dmar_fault_do_one(struct intel_iommu *iommu, int type, reason = dmar_get_fault_reason(fault_reason, &fault_type); if (fault_type == INTR_REMAP) - pr_err("[INTR-REMAP] Request device [0x%02x:0x%02x.%d] fault index 0x%llx [fault reason 0x%02x] %s\n", + pr_err("[INTR-REMAP] Request device [%02x:%02x.%d] fault index 0x%llx [fault reason 0x%02x] %s\n", source_id >> 8, PCI_SLOT(source_id & 0xFF), PCI_FUNC(source_id & 0xFF), addr >> 48, fault_reason, reason); else if (pasid == INVALID_IOASID) - pr_err("[%s NO_PASID] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n", + pr_err("[%s NO_PASID] Request device [%02x:%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n", type ? "DMA Read" : "DMA Write", source_id >> 8, PCI_SLOT(source_id & 0xFF), PCI_FUNC(source_id & 0xFF), addr, fault_reason, reason); else - pr_err("[%s PASID 0x%x] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n", + pr_err("[%s PASID 0x%x] Request device [%02x:%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n", type ? "DMA Read" : "DMA Write", pasid, source_id >> 8, PCI_SLOT(source_id & 0xFF), PCI_FUNC(source_id & 0xFF), addr, -- cgit From f0b636804c7c4c564efbca5981e3c56b5c6fe0c5 Mon Sep 17 00:00:00 2001 From: Sven Peter Date: Fri, 24 Sep 2021 15:45:02 +0200 Subject: iommu/dart: Clear sid2group entry when a group is freed sid2groups keeps track of which stream id combinations belong to a iommu_group to assign those correctly to devices. When a iommu_group is freed a stale pointer will however remain in sid2groups. This prevents devices with the same stream id combination to ever be attached again (see below). Fix that by creating a shadow copy of the stream id configuration when a group is allocated for the first time and clear the sid2group entry when that group is freed. # echo 1 >/sys/bus/pci/devices/0000\:03\:00.0/remove pci 0000:03:00.0: Removing from iommu group 1 # echo 1 >/sys/bus/pci/rescan [...] pci 0000:03:00.0: BAR 0: assigned [mem 0x6a0000000-0x6a000ffff 64bit pref] pci 0000:03:00.0: BAR 2: assigned [mem 0x6a0010000-0x6a001ffff 64bit pref] pci 0000:03:00.0: BAR 6: assigned [mem 0x6c0100000-0x6c01007ff pref] tg3 0000:03:00.0: Failed to add to iommu group 1: -2 [...] Fixes: 46d1fb072e76b161 ("iommu/dart: Add DART iommu driver") Reported-by: Marc Zyngier Signed-off-by: Sven Peter Tested-by: Marc Zyngier Link: https://lore.kernel.org/r/20210924134502.15589-1-sven@svenpeter.dev Signed-off-by: Joerg Roedel --- drivers/iommu/apple-dart.c | 38 +++++++++++++++++++++++++++++++++++--- 1 file changed, 35 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c index bc0d9c363184..fdfa39ec2a4d 100644 --- a/drivers/iommu/apple-dart.c +++ b/drivers/iommu/apple-dart.c @@ -643,16 +643,34 @@ static int apple_dart_of_xlate(struct device *dev, struct of_phandle_args *args) return -EINVAL; } +static DEFINE_MUTEX(apple_dart_groups_lock); + +static void apple_dart_release_group(void *iommu_data) +{ + int i, sid; + struct apple_dart_stream_map *stream_map; + struct apple_dart_master_cfg *group_master_cfg = iommu_data; + + mutex_lock(&apple_dart_groups_lock); + + for_each_stream_map(i, group_master_cfg, stream_map) + for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS) + stream_map->dart->sid2group[sid] = NULL; + + kfree(iommu_data); + mutex_unlock(&apple_dart_groups_lock); +} + static struct iommu_group *apple_dart_device_group(struct device *dev) { - static DEFINE_MUTEX(lock); int i, sid; struct apple_dart_master_cfg *cfg = dev_iommu_priv_get(dev); struct apple_dart_stream_map *stream_map; + struct apple_dart_master_cfg *group_master_cfg; struct iommu_group *group = NULL; struct iommu_group *res = ERR_PTR(-EINVAL); - mutex_lock(&lock); + mutex_lock(&apple_dart_groups_lock); for_each_stream_map(i, cfg, stream_map) { for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS) { @@ -680,6 +698,20 @@ static struct iommu_group *apple_dart_device_group(struct device *dev) #endif group = generic_device_group(dev); + res = ERR_PTR(-ENOMEM); + if (!group) + goto out; + + group_master_cfg = kzalloc(sizeof(*group_master_cfg), GFP_KERNEL); + if (!group_master_cfg) { + iommu_group_put(group); + goto out; + } + + memcpy(group_master_cfg, cfg, sizeof(*group_master_cfg)); + iommu_group_set_iommudata(group, group_master_cfg, + apple_dart_release_group); + for_each_stream_map(i, cfg, stream_map) for_each_set_bit(sid, &stream_map->sidmap, DART_MAX_STREAMS) stream_map->dart->sid2group[sid] = group; @@ -687,7 +719,7 @@ static struct iommu_group *apple_dart_device_group(struct device *dev) res = group; out: - mutex_unlock(&lock); + mutex_unlock(&apple_dart_groups_lock); return res; } -- cgit From ced185824c89b60e65b5a2606954c098320cdfb8 Mon Sep 17 00:00:00 2001 From: Johan Almbladh Date: Mon, 27 Sep 2021 13:11:57 +0000 Subject: bpf, x86: Fix bpf mapping of atomic fetch implementation Fix the case where the dst register maps to %rax as otherwise this produces an incorrect mapping with the implementation in 981f94c3e921 ("bpf: Add bitwise atomic instructions") as %rax is clobbered given it's part of the cmpxchg as operand. The issue is similar to b29dd96b905f ("bpf, x86: Fix BPF_FETCH atomic and/or/ xor with r0 as src") just that the case of dst register was missed. Before, dst=r0 (%rax) src=r2 (%rsi): [...] c5: mov %rax,%r10 c8: mov 0x0(%rax),%rax <---+ (broken) cc: mov %rax,%r11 | cf: and %rsi,%r11 | d2: lock cmpxchg %r11,0x0(%rax) <---+ d8: jne 0x00000000000000c8 | da: mov %rax,%rsi | dd: mov %r10,%rax | [...] | | After, dst=r0 (%rax) src=r2 (%rsi): | | [...] | da: mov %rax,%r10 | dd: mov 0x0(%r10),%rax <---+ (fixed) e1: mov %rax,%r11 | e4: and %rsi,%r11 | e7: lock cmpxchg %r11,0x0(%r10) <---+ ed: jne 0x00000000000000dd ef: mov %rax,%rsi f2: mov %r10,%rax [...] The remaining combinations were fine as-is though: After, dst=r9 (%r15) src=r0 (%rax): [...] dc: mov %rax,%r10 df: mov 0x0(%r15),%rax e3: mov %rax,%r11 e6: and %r10,%r11 e9: lock cmpxchg %r11,0x0(%r15) ef: jne 0x00000000000000df _ f1: mov %rax,%r10 | (unneeded, but f4: mov %r10,%rax _| not a problem) [...] After, dst=r9 (%r15) src=r4 (%rcx): [...] de: mov %rax,%r10 e1: mov 0x0(%r15),%rax e5: mov %rax,%r11 e8: and %rcx,%r11 eb: lock cmpxchg %r11,0x0(%r15) f1: jne 0x00000000000000e1 f3: mov %rax,%rcx f6: mov %r10,%rax [...] The case of dst == src register is rejected by the verifier and therefore not supported, but x86 JIT also handles this case just fine. After, dst=r0 (%rax) src=r0 (%rax): [...] eb: mov %rax,%r10 ee: mov 0x0(%r10),%rax f2: mov %rax,%r11 f5: and %r10,%r11 f8: lock cmpxchg %r11,0x0(%r10) fe: jne 0x00000000000000ee 100: mov %rax,%r10 103: mov %r10,%rax [...] Fixes: 981f94c3e921 ("bpf: Add bitwise atomic instructions") Reported-by: Johan Almbladh Signed-off-by: Johan Almbladh Co-developed-by: Daniel Borkmann Signed-off-by: Daniel Borkmann Reviewed-by: Brendan Jackman Acked-by: Alexei Starovoitov --- arch/x86/net/bpf_jit_comp.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index d24a512fd6f3..9ea57389c554 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -1341,9 +1341,10 @@ st: if (is_imm8(insn->off)) if (insn->imm == (BPF_AND | BPF_FETCH) || insn->imm == (BPF_OR | BPF_FETCH) || insn->imm == (BPF_XOR | BPF_FETCH)) { - u8 *branch_target; bool is64 = BPF_SIZE(insn->code) == BPF_DW; u32 real_src_reg = src_reg; + u32 real_dst_reg = dst_reg; + u8 *branch_target; /* * Can't be implemented with a single x86 insn. @@ -1354,11 +1355,13 @@ st: if (is_imm8(insn->off)) emit_mov_reg(&prog, true, BPF_REG_AX, BPF_REG_0); if (src_reg == BPF_REG_0) real_src_reg = BPF_REG_AX; + if (dst_reg == BPF_REG_0) + real_dst_reg = BPF_REG_AX; branch_target = prog; /* Load old value */ emit_ldx(&prog, BPF_SIZE(insn->code), - BPF_REG_0, dst_reg, insn->off); + BPF_REG_0, real_dst_reg, insn->off); /* * Perform the (commutative) operation locally, * put the result in the AUX_REG. @@ -1369,7 +1372,8 @@ st: if (is_imm8(insn->off)) add_2reg(0xC0, AUX_REG, real_src_reg)); /* Attempt to swap in new value */ err = emit_atomic(&prog, BPF_CMPXCHG, - dst_reg, AUX_REG, insn->off, + real_dst_reg, AUX_REG, + insn->off, BPF_SIZE(insn->code)); if (WARN_ON(err)) return err; @@ -1383,11 +1387,10 @@ st: if (is_imm8(insn->off)) /* Restore R0 after clobbering RAX */ emit_mov_reg(&prog, true, BPF_REG_0, BPF_REG_AX); break; - } err = emit_atomic(&prog, insn->imm, dst_reg, src_reg, - insn->off, BPF_SIZE(insn->code)); + insn->off, BPF_SIZE(insn->code)); if (err) return err; break; -- cgit From 51bb08dd04a05035a64504faa47651d36b0f3125 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 16:13:02 +0200 Subject: net: ks8851: fix link error An object file cannot be built for both loadable module and built-in use at the same time: arm-linux-gnueabi-ld: drivers/net/ethernet/micrel/ks8851_common.o: in function `ks8851_probe_common': ks8851_common.c:(.text+0xf80): undefined reference to `__this_module' Change the ks8851_common code to be a standalone module instead, and use Makefile logic to ensure this is built-in if at least one of its two users is. Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations") Link: https://lore.kernel.org/netdev/20210125121937.3900988-1-arnd@kernel.org/ Reviewed-by: Andrew Lunn Acked-by: Marek Vasut Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/Makefile | 6 ++---- drivers/net/ethernet/micrel/ks8851_common.c | 8 ++++++++ 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/micrel/Makefile b/drivers/net/ethernet/micrel/Makefile index 5cc00d22c708..6ecc4eb30e74 100644 --- a/drivers/net/ethernet/micrel/Makefile +++ b/drivers/net/ethernet/micrel/Makefile @@ -4,8 +4,6 @@ # obj-$(CONFIG_KS8842) += ks8842.o -obj-$(CONFIG_KS8851) += ks8851.o -ks8851-objs = ks8851_common.o ks8851_spi.o -obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o -ks8851_mll-objs = ks8851_common.o ks8851_par.o +obj-$(CONFIG_KS8851) += ks8851_common.o ks8851_spi.o +obj-$(CONFIG_KS8851_MLL) += ks8851_common.o ks8851_par.o obj-$(CONFIG_KSZ884X_PCI) += ksz884x.o diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c index 3f69bb59ba49..a6db1a8156e1 100644 --- a/drivers/net/ethernet/micrel/ks8851_common.c +++ b/drivers/net/ethernet/micrel/ks8851_common.c @@ -1057,6 +1057,7 @@ int ks8851_suspend(struct device *dev) return 0; } +EXPORT_SYMBOL_GPL(ks8851_suspend); int ks8851_resume(struct device *dev) { @@ -1070,6 +1071,7 @@ int ks8851_resume(struct device *dev) return 0; } +EXPORT_SYMBOL_GPL(ks8851_resume); #endif static int ks8851_register_mdiobus(struct ks8851_net *ks, struct device *dev) @@ -1243,6 +1245,7 @@ err_reg: err_reg_io: return ret; } +EXPORT_SYMBOL_GPL(ks8851_probe_common); int ks8851_remove_common(struct device *dev) { @@ -1261,3 +1264,8 @@ int ks8851_remove_common(struct device *dev) return 0; } +EXPORT_SYMBOL_GPL(ks8851_remove_common); + +MODULE_DESCRIPTION("KS8851 Network driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL"); -- cgit From 05e97b3d33cb25b9d9580b33ea0dd69aa922c529 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Sep 2021 16:15:24 +0200 Subject: dmascc: add CONFIG_VIRT_TO_BUS dependency Many architectures don't define virt_to_bus() any more, as drivers should be using the dma-mapping interfaces where possible: In file included from drivers/net/hamradio/dmascc.c:27: drivers/net/hamradio/dmascc.c: In function 'tx_on': drivers/net/hamradio/dmascc.c:976:30: error: implicit declaration of function 'virt_to_bus'; did you mean 'virt_to_fix'? [-Werror=implicit-function-declaration] 976 | virt_to_bus(priv->tx_buf[priv->tx_tail]) + n); | ^~~~~~~~~~~ arch/arm/include/asm/dma.h:109:52: note: in definition of macro 'set_dma_addr' 109 | __set_dma_addr(chan, (void *)__bus_to_virt(addr)) | ^~~~ Add the Kconfig dependency to prevent this from being built on architectures without virt_to_bus(). Fixes: bc1abb9e55ce ("dmascc: use proper 'virt_to_bus()' rather than casting to 'int'") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/hamradio/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index f4843f9672c1..441da03c23ee 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -48,6 +48,7 @@ config BPQETHER config DMASCC tristate "High-speed (DMA) SCC driver for AX.25" depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API + depends on VIRT_TO_BUS help This is a driver for high-speed SCC boards, i.e. those supporting DMA on one port. You usually use those boards to connect your -- cgit From c23bb54f28d61a48008428e8cd320c947993919b Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 27 Sep 2021 14:07:18 -0700 Subject: ionic: fix gathering of debug stats Don't print stats for which we haven't reserved space as it can cause nasty memory bashing and related bad behaviors. Fixes: aa620993b1e5 ("ionic: pull per-q stats work out of queue loops") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_stats.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_stats.c b/drivers/net/ethernet/pensando/ionic/ionic_stats.c index 58a854666c62..c14de5fcedea 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_stats.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_stats.c @@ -380,15 +380,6 @@ static void ionic_sw_stats_get_txq_values(struct ionic_lif *lif, u64 **buf, &ionic_dbg_intr_stats_desc[i]); (*buf)++; } - for (i = 0; i < IONIC_NUM_DBG_NAPI_STATS; i++) { - **buf = IONIC_READ_STAT64(&txqcq->napi_stats, - &ionic_dbg_napi_stats_desc[i]); - (*buf)++; - } - for (i = 0; i < IONIC_MAX_NUM_NAPI_CNTR; i++) { - **buf = txqcq->napi_stats.work_done_cntr[i]; - (*buf)++; - } for (i = 0; i < IONIC_MAX_NUM_SG_CNTR; i++) { **buf = txstats->sg_cntr[i]; (*buf)++; -- cgit From 103bde372f084206c6972be543ecc247ebbff9f3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 27 Sep 2021 14:48:23 -0700 Subject: net: sun: SUNVNET_COMMON should depend on INET When CONFIG_INET is not set, there are failing references to IPv4 functions, so make this driver depend on INET. Fixes these build errors: sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common': sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send' sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common': sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check' Signed-off-by: Randy Dunlap Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Aaron Young Cc: Rashmi Narasimhan Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/sun/Kconfig b/drivers/net/ethernet/sun/Kconfig index 309de38a7530..b0d3f9a2950c 100644 --- a/drivers/net/ethernet/sun/Kconfig +++ b/drivers/net/ethernet/sun/Kconfig @@ -73,6 +73,7 @@ config CASSINI config SUNVNET_COMMON tristate "Common routines to support Sun Virtual Networking" depends on SUN_LDOMS + depends on INET default m config SUNVNET -- cgit From a9f5970767d11eadc805d5283f202612c7ba1f59 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 27 Sep 2021 17:29:24 -0700 Subject: net: udp: annotate data race around udp_sk(sk)->corkflag up->corkflag field can be read or written without any lock. Annotate accesses to avoid possible syzbot/KCSAN reports. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/udp.c | 10 +++++----- net/ipv6/udp.c | 2 +- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 8851c9463b4b..2a7825a5b842 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1053,7 +1053,7 @@ int udp_sendmsg(struct sock *sk, struct msghdr *msg, size_t len) __be16 dport; u8 tos; int err, is_udplite = IS_UDPLITE(sk); - int corkreq = up->corkflag || msg->msg_flags&MSG_MORE; + int corkreq = READ_ONCE(up->corkflag) || msg->msg_flags&MSG_MORE; int (*getfrag)(void *, char *, int, int, int, struct sk_buff *); struct sk_buff *skb; struct ip_options_data opt_copy; @@ -1361,7 +1361,7 @@ int udp_sendpage(struct sock *sk, struct page *page, int offset, } up->len += size; - if (!(up->corkflag || (flags&MSG_MORE))) + if (!(READ_ONCE(up->corkflag) || (flags&MSG_MORE))) ret = udp_push_pending_frames(sk); if (!ret) ret = size; @@ -2662,9 +2662,9 @@ int udp_lib_setsockopt(struct sock *sk, int level, int optname, switch (optname) { case UDP_CORK: if (val != 0) { - up->corkflag = 1; + WRITE_ONCE(up->corkflag, 1); } else { - up->corkflag = 0; + WRITE_ONCE(up->corkflag, 0); lock_sock(sk); push_pending_frames(sk); release_sock(sk); @@ -2787,7 +2787,7 @@ int udp_lib_getsockopt(struct sock *sk, int level, int optname, switch (optname) { case UDP_CORK: - val = up->corkflag; + val = READ_ONCE(up->corkflag); break; case UDP_ENCAP: diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index ea53847b5b7e..e505bb007e9f 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1303,7 +1303,7 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len) int addr_len = msg->msg_namelen; bool connected = false; int ulen = len; - int corkreq = up->corkflag || msg->msg_flags&MSG_MORE; + int corkreq = READ_ONCE(up->corkflag) || msg->msg_flags&MSG_MORE; int err; int is_udplite = IS_UDPLITE(sk); int (*getfrag)(void *, char *, int, int, int, struct sk_buff *); -- cgit From f4bd73b5a950866f6c6fc98a7b684d307c5d586a Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Tue, 28 Sep 2021 09:42:27 +0900 Subject: af_unix: Return errno instead of NULL in unix_create1(). unix_create1() returns NULL on error, and the callers assume that it never fails for reasons other than out of memory. So, the callers always return -ENOMEM when unix_create1() fails. However, it also returns NULL when the number of af_unix sockets exceeds twice the limit controlled by sysctl: fs.file-max. In this case, the callers should return -ENFILE like alloc_empty_file(). This patch changes unix_create1() to return the correct error value instead of NULL on error. Out of curiosity, the assumption has been wrong since 1999 due to this change introduced in 2.2.4 [0]. diff -u --recursive --new-file v2.2.3/linux/net/unix/af_unix.c linux/net/unix/af_unix.c --- v2.2.3/linux/net/unix/af_unix.c Tue Jan 19 11:32:53 1999 +++ linux/net/unix/af_unix.c Sun Mar 21 07:22:00 1999 @@ -388,6 +413,9 @@ { struct sock *sk; + if (atomic_read(&unix_nr_socks) >= 2*max_files) + return NULL; + MOD_INC_USE_COUNT; sk = sk_alloc(PF_UNIX, GFP_KERNEL, 1); if (!sk) { [0]: https://cdn.kernel.org/pub/linux/kernel/v2.2/patch-2.2.4.gz Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller --- net/unix/af_unix.c | 49 ++++++++++++++++++++++++++++++++----------------- 1 file changed, 32 insertions(+), 17 deletions(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 92345c9bb60c..f505b89bda6a 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -828,20 +828,25 @@ struct proto unix_stream_proto = { static struct sock *unix_create1(struct net *net, struct socket *sock, int kern, int type) { - struct sock *sk = NULL; struct unix_sock *u; + struct sock *sk; + int err; atomic_long_inc(&unix_nr_socks); - if (atomic_long_read(&unix_nr_socks) > 2 * get_max_files()) - goto out; + if (atomic_long_read(&unix_nr_socks) > 2 * get_max_files()) { + err = -ENFILE; + goto err; + } if (type == SOCK_STREAM) sk = sk_alloc(net, PF_UNIX, GFP_KERNEL, &unix_stream_proto, kern); else /*dgram and seqpacket */ sk = sk_alloc(net, PF_UNIX, GFP_KERNEL, &unix_dgram_proto, kern); - if (!sk) - goto out; + if (!sk) { + err = -ENOMEM; + goto err; + } sock_init_data(sock, sk); @@ -861,20 +866,23 @@ static struct sock *unix_create1(struct net *net, struct socket *sock, int kern, init_waitqueue_func_entry(&u->peer_wake, unix_dgram_peer_wake_relay); memset(&u->scm_stat, 0, sizeof(struct scm_stat)); unix_insert_socket(unix_sockets_unbound(sk), sk); -out: - if (sk == NULL) - atomic_long_dec(&unix_nr_socks); - else { - local_bh_disable(); - sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1); - local_bh_enable(); - } + + local_bh_disable(); + sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1); + local_bh_enable(); + return sk; + +err: + atomic_long_dec(&unix_nr_socks); + return ERR_PTR(err); } static int unix_create(struct net *net, struct socket *sock, int protocol, int kern) { + struct sock *sk; + if (protocol && protocol != PF_UNIX) return -EPROTONOSUPPORT; @@ -901,7 +909,11 @@ static int unix_create(struct net *net, struct socket *sock, int protocol, return -ESOCKTNOSUPPORT; } - return unix_create1(net, sock, kern, sock->type) ? 0 : -ENOMEM; + sk = unix_create1(net, sock, kern, sock->type); + if (IS_ERR(sk)) + return PTR_ERR(sk); + + return 0; } static int unix_release(struct socket *sock) @@ -1314,12 +1326,15 @@ static int unix_stream_connect(struct socket *sock, struct sockaddr *uaddr, we will have to recheck all again in any case. */ - err = -ENOMEM; - /* create new sock for complete connection */ newsk = unix_create1(sock_net(sk), NULL, 0, sock->type); - if (newsk == NULL) + if (IS_ERR(newsk)) { + err = PTR_ERR(newsk); + newsk = NULL; goto out; + } + + err = -ENOMEM; /* Allocate skb for sending to listening sock */ skb = sock_wmalloc(newsk, 1, 0, GFP_KERNEL); -- cgit From c6995117b60ef3f7afca8fb41f906e9f459d869a Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Tue, 28 Sep 2021 09:17:20 +0200 Subject: net: mdio: mscc-miim: Fix the mdio controller According to the documentation the second resource is optional. But the blamed commit ignores that and if the resource is not there it just fails. This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: 672a1c394950 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()") Signed-off-by: Horatiu Vultur Reviewed-by: Cai Huoqing Signed-off-by: David S. Miller --- drivers/net/mdio/mdio-mscc-miim.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/mdio/mdio-mscc-miim.c b/drivers/net/mdio/mdio-mscc-miim.c index 1ee592d3eae4..17f98f609ec8 100644 --- a/drivers/net/mdio/mdio-mscc-miim.c +++ b/drivers/net/mdio/mdio-mscc-miim.c @@ -134,8 +134,9 @@ static int mscc_miim_reset(struct mii_bus *bus) static int mscc_miim_probe(struct platform_device *pdev) { - struct mii_bus *bus; struct mscc_miim_dev *dev; + struct resource *res; + struct mii_bus *bus; int ret; bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*dev)); @@ -156,10 +157,14 @@ static int mscc_miim_probe(struct platform_device *pdev) return PTR_ERR(dev->regs); } - dev->phy_regs = devm_platform_ioremap_resource(pdev, 1); - if (IS_ERR(dev->phy_regs)) { - dev_err(&pdev->dev, "Unable to map internal phy registers\n"); - return PTR_ERR(dev->phy_regs); + /* This resource is optional */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res) { + dev->phy_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dev->phy_regs)) { + dev_err(&pdev->dev, "Unable to map internal phy registers\n"); + return PTR_ERR(dev->phy_regs); + } } ret = of_mdiobus_register(bus, pdev->dev.of_node); -- cgit From c894b51e2a23c8c00acb3cea5045c5b70691e790 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 28 Sep 2021 10:58:34 +0200 Subject: net: hns3: fix hclge_dbg_dump_tm_pg() stack usage This function copies strings around between multiple buffers including a large on-stack array that causes a build warning on 32-bit systems: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=] The function can probably be cleaned up a lot, to go back to printing directly into the output buffer, but dynamically allocating the structure is a simpler workaround for now. Fixes: 04d96139ddb3 ("net: hns3: refine function hclge_dbg_dump_tm_pri()") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 28 ++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c index 87d96f82c318..32f62cd2dd99 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c @@ -719,9 +719,9 @@ static void hclge_dbg_fill_shaper_content(struct hclge_tm_shaper_para *para, sprintf(result[(*index)++], "%6u", para->rate); } -static int hclge_dbg_dump_tm_pg(struct hclge_dev *hdev, char *buf, int len) +static int __hclge_dbg_dump_tm_pg(struct hclge_dev *hdev, char *data_str, + char *buf, int len) { - char data_str[ARRAY_SIZE(tm_pg_items)][HCLGE_DBG_DATA_STR_LEN]; struct hclge_tm_shaper_para c_shaper_para, p_shaper_para; char *result[ARRAY_SIZE(tm_pg_items)], *sch_mode_str; u8 pg_id, sch_mode, weight, pri_bit_map, i, j; @@ -729,8 +729,10 @@ static int hclge_dbg_dump_tm_pg(struct hclge_dev *hdev, char *buf, int len) int pos = 0; int ret; - for (i = 0; i < ARRAY_SIZE(tm_pg_items); i++) - result[i] = &data_str[i][0]; + for (i = 0; i < ARRAY_SIZE(tm_pg_items); i++) { + result[i] = data_str; + data_str += HCLGE_DBG_DATA_STR_LEN; + } hclge_dbg_fill_content(content, sizeof(content), tm_pg_items, NULL, ARRAY_SIZE(tm_pg_items)); @@ -781,6 +783,24 @@ static int hclge_dbg_dump_tm_pg(struct hclge_dev *hdev, char *buf, int len) return 0; } +static int hclge_dbg_dump_tm_pg(struct hclge_dev *hdev, char *buf, int len) +{ + char *data_str; + int ret; + + data_str = kcalloc(ARRAY_SIZE(tm_pg_items), + HCLGE_DBG_DATA_STR_LEN, GFP_KERNEL); + + if (!data_str) + return -ENOMEM; + + ret = __hclge_dbg_dump_tm_pg(hdev, data_str, buf, len); + + kfree(data_str); + + return ret; +} + static int hclge_dbg_dump_tm_port(struct hclge_dev *hdev, char *buf, int len) { struct hclge_tm_shaper_para shaper_para; -- cgit From ebc69e897e17373fbe1daaff1debaa77583a5284 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 28 Sep 2021 06:33:15 -0600 Subject: Revert "block, bfq: honor already-setup queue merges" This reverts commit 2d52c58b9c9bdae0ca3df6a1eab5745ab3f7d80b. We have had several folks complain that this causes hangs for them, which is especially problematic as the commit has also hit stable already. As no resolution seems to be forthcoming right now, revert the patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214503 Fixes: 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") Signed-off-by: Jens Axboe --- block/bfq-iosched.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c index dd13c2bbc29c..480e1a134859 100644 --- a/block/bfq-iosched.c +++ b/block/bfq-iosched.c @@ -2662,15 +2662,6 @@ bfq_setup_merge(struct bfq_queue *bfqq, struct bfq_queue *new_bfqq) * are likely to increase the throughput. */ bfqq->new_bfqq = new_bfqq; - /* - * The above assignment schedules the following redirections: - * each time some I/O for bfqq arrives, the process that - * generated that I/O is disassociated from bfqq and - * associated with new_bfqq. Here we increases new_bfqq->ref - * in advance, adding the number of processes that are - * expected to be associated with new_bfqq as they happen to - * issue I/O. - */ new_bfqq->ref += process_refs; return new_bfqq; } @@ -2733,10 +2724,6 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq, { struct bfq_queue *in_service_bfqq, *new_bfqq; - /* if a merge has already been setup, then proceed with that first */ - if (bfqq->new_bfqq) - return bfqq->new_bfqq; - /* * Check delayed stable merge for rotational or non-queueing * devs. For this branch to be executed, bfqq must not be @@ -2838,6 +2825,9 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq, if (bfq_too_late_for_merging(bfqq)) return NULL; + if (bfqq->new_bfqq) + return bfqq->new_bfqq; + if (!io_struct || unlikely(bfqq == &bfqd->oom_bfqq)) return NULL; -- cgit From df38d852c6814cbbd010d81e84efb9dc057d5ba6 Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Tue, 28 Sep 2021 22:07:50 +0800 Subject: kernfs: also call kernfs_set_rev() for positive dentry A KMSAN warning is reported by Alexander Potapenko: BUG: KMSAN: uninit-value in kernfs_dop_revalidate+0x61f/0x840 fs/kernfs/dir.c:1053 kernfs_dop_revalidate+0x61f/0x840 fs/kernfs/dir.c:1053 d_revalidate fs/namei.c:854 lookup_dcache fs/namei.c:1522 __lookup_hash+0x3a6/0x590 fs/namei.c:1543 filename_create+0x312/0x7c0 fs/namei.c:3657 do_mkdirat+0x103/0x930 fs/namei.c:3900 __do_sys_mkdir fs/namei.c:3931 __se_sys_mkdir fs/namei.c:3929 __x64_sys_mkdir+0xda/0x120 fs/namei.c:3929 do_syscall_x64 arch/x86/entry/common.c:51 It seems a positive dentry in kernfs becomes a negative dentry directly through d_delete() in vfs_rmdir(). dentry->d_time is uninitialized when accessing it in kernfs_dop_revalidate(), because it is only initialized when created as negative dentry in kernfs_iop_lookup(). The problem can be reproduced by the following command: cd /sys/fs/cgroup/pids && mkdir hi && stat hi && rmdir hi && stat hi A simple fixes seems to be initializing d->d_time for positive dentry in kernfs_iop_lookup() as well. The downside is the negative dentry will be revalidated again after it becomes negative in d_delete(), because the revison of its parent must have been increased due to its removal. Alternative solution is implement .d_iput for kernfs, and assign d_time for the newly-generated negative dentry in it. But we may need to take kernfs_rwsem to protect again the concurrent kernfs_link_sibling() on the parent directory, it is a little over-killing. Now the simple fix is chosen. Link: https://marc.info/?l=linux-fsdevel&m=163249838610499 Fixes: c7e7c04274b1 ("kernfs: use VFS negative dentry caching") Reported-by: Alexander Potapenko Signed-off-by: Hou Tao Link: https://lore.kernel.org/r/20210928140750.1274441-1-houtao1@huawei.com Signed-off-by: Greg Kroah-Hartman --- fs/kernfs/dir.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/kernfs/dir.c b/fs/kernfs/dir.c index ba581429bf7b..cfc3ce8b815a 100644 --- a/fs/kernfs/dir.c +++ b/fs/kernfs/dir.c @@ -1116,8 +1116,13 @@ static struct dentry *kernfs_iop_lookup(struct inode *dir, if (!inode) inode = ERR_PTR(-ENOMEM); } - /* Needed only for negative dentry validation */ - if (!inode) + /* + * Needed for negative dentry validation. + * The negative dentry can be created in kernfs_iop_lookup() + * or transforms from positive dentry in dentry_unlink_inode() + * called from vfs_rmdir(). + */ + if (!IS_ERR(inode)) kernfs_set_rev(parent, dentry); up_read(&kernfs_rwsem); -- cgit From 66805763a97f8f7bdf742fc0851d85c02ed9411f Mon Sep 17 00:00:00 2001 From: Leslie Shi Date: Thu, 23 Sep 2021 16:05:31 +0800 Subject: drm/amdgpu: fix gart.bo pin_count leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gmc_v{9,10}_0_gart_disable() isn't called matched with correspoding gart_enbale function in SRIOV case. This will lead to gart.bo pin_count leak on driver unload. Cc: Hawking Zhang Signed-off-by: Leslie Shi Signed-off-by: Guchun Chen Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 3 ++- drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c index 41c3a0d70b7c..e47104a1f559 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c @@ -1098,6 +1098,8 @@ static int gmc_v10_0_hw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + gmc_v10_0_gart_disable(adev); + if (amdgpu_sriov_vf(adev)) { /* full access mode, so don't touch any GMC register */ DRM_DEBUG("For SRIOV client, shouldn't do anything.\n"); @@ -1106,7 +1108,6 @@ static int gmc_v10_0_hw_fini(void *handle) amdgpu_irq_put(adev, &adev->gmc.ecc_irq, 0); amdgpu_irq_put(adev, &adev->gmc.vm_fault, 0); - gmc_v10_0_gart_disable(adev); return 0; } diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c index d90c16a6b2b8..5551359d5dfd 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c @@ -1794,6 +1794,8 @@ static int gmc_v9_0_hw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + gmc_v9_0_gart_disable(adev); + if (amdgpu_sriov_vf(adev)) { /* full access mode, so don't touch any GMC register */ DRM_DEBUG("For SRIOV client, shouldn't do anything.\n"); @@ -1802,7 +1804,6 @@ static int gmc_v9_0_hw_fini(void *handle) amdgpu_irq_put(adev, &adev->gmc.ecc_irq, 0); amdgpu_irq_put(adev, &adev->gmc.vm_fault, 0); - gmc_v9_0_gart_disable(adev); return 0; } -- cgit From 083fa05bbaf65a01866b5440031c822e32ad7510 Mon Sep 17 00:00:00 2001 From: Praful Swarnakar Date: Wed, 22 Sep 2021 23:01:29 +0530 Subject: drm/amd/display: Fix Display Flicker on embedded panels [Why] ASSR is dependent on Signed PSP Verstage to enable Content Protection for eDP panels. Unsigned PSP verstage is used during development phase causing ASSR to FAIL. As a result, link training is performed with DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for eDP panels that causes display flicker on some panels. [How] - Do not change panel mode, if ASSR is disabled - Just report and continue to perform eDP link training with right settings further. Signed-off-by: Praful Swarnakar Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index f6dbc5a74757..05eaec03d9f7 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -1826,14 +1826,13 @@ bool perform_link_training_with_retries( if (panel_mode == DP_PANEL_MODE_EDP) { struct cp_psp *cp_psp = &stream->ctx->cp_psp; - if (cp_psp && cp_psp->funcs.enable_assr) { - if (!cp_psp->funcs.enable_assr(cp_psp->handle, link)) { - /* since eDP implies ASSR on, change panel - * mode to disable ASSR - */ - panel_mode = DP_PANEL_MODE_DEFAULT; - } - } + if (cp_psp && cp_psp->funcs.enable_assr) + /* ASSR is bound to fail with unsigned PSP + * verstage used during devlopment phase. + * Report and continue with eDP panel mode to + * perform eDP link training with right settings + */ + cp_psp->funcs.enable_assr(cp_psp->handle, link); } #endif -- cgit From 9f52c25f59b504a29dda42d83ac1e24d2af535d4 Mon Sep 17 00:00:00 2001 From: Hawking Zhang Date: Sun, 26 Sep 2021 22:19:35 +0800 Subject: drm/amdgpu: correct initial cp_hqd_quantum for gfx9 didn't read the value of mmCP_HQD_QUANTUM from correct register offset Signed-off-by: Hawking Zhang Reviewed-by: Le Ma Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 603c259b073b..025184a556ee 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -3599,7 +3599,7 @@ static int gfx_v9_0_mqd_init(struct amdgpu_ring *ring) /* set static priority for a queue/ring */ gfx_v9_0_mqd_set_priority(ring, mqd); - mqd->cp_hqd_quantum = RREG32(mmCP_HQD_QUANTUM); + mqd->cp_hqd_quantum = RREG32_SOC15(GC, 0, mmCP_HQD_QUANTUM); /* map_queues packet doesn't need activate the queue, * so only kiq need set this field. -- cgit From 467a51b69d0828887fb1b6719159a6b16da688f8 Mon Sep 17 00:00:00 2001 From: Josip Pavic Date: Fri, 17 Sep 2021 11:01:47 -0400 Subject: drm/amd/display: initialize backlight_ramping_override to false [Why] Stack variable params.backlight_ramping_override is uninitialized, so it contains junk data [How] Initialize the variable to false Reviewed-by: Roman Li Acked-by: Anson Jacob Signed-off-by: Josip Pavic Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 66c799f5c7cf..e6a68337d42f 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1719,6 +1719,7 @@ static int dm_late_init(void *handle) linear_lut[i] = 0xFFFF * i / 15; params.set = 0; + params.backlight_ramping_override = false; params.backlight_ramping_start = 0xCCCC; params.backlight_ramping_reduction = 0xCCCCCCCC; params.backlight_lut_array_size = 16; -- cgit From d942856865c733ff60450de9691af796ad71d7bc Mon Sep 17 00:00:00 2001 From: Charlene Liu Date: Mon, 20 Sep 2021 14:30:02 -0400 Subject: drm/amd/display: Pass PCI deviceid into DC [why] pci deviceid not passed to dal dc, without proper break, dcn2.x falls into dcn3.x code path [how] pass in pci deviceid, and break once dal_version initialized. Reviewed-by: Zhan Liu Acked-by: Anson Jacob Signed-off-by: Charlene Liu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index e6a68337d42f..1ea31dcc7a8b 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1115,6 +1115,7 @@ static int amdgpu_dm_init(struct amdgpu_device *adev) init_data.asic_id.pci_revision_id = adev->pdev->revision; init_data.asic_id.hw_internal_rev = adev->external_rev_id; + init_data.asic_id.chip_id = adev->pdev->device; init_data.asic_id.vram_width = adev->gmc.vram_width; /* TODO: initialize init_data.asic_id.vram_type here!!!! */ -- cgit From 98122e63a7ecc08c4172a17d97a06ef5536eb268 Mon Sep 17 00:00:00 2001 From: Simon Ser Date: Mon, 27 Sep 2021 15:08:44 +0000 Subject: drm/amdgpu: check tiling flags when creating FB on GFX8- MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On GFX9+, format modifiers are always enabled and ensure the frame-buffers can be scanned out at ADDFB2 time. On GFX8-, format modifiers are not supported and no other check is performed. This means ADDFB2 IOCTLs will succeed even if the tiling isn't supported for scan-out, and will result in garbage displayed on screen [1]. Fix this by adding a check for tiling flags for GFX8 and older. The check is taken from radeonsi in Mesa (see how is_displayable is populated in gfx6_compute_surface). Changes in v2: use drm_WARN_ONCE instead of drm_WARN (Michel) [1]: https://github.com/swaywm/wlroots/issues/3185 Signed-off-by: Simon Ser Acked-by: Michel Dänzer Cc: Alex Deucher Cc: Harry Wentland Cc: Nicholas Kazlauskas Cc: Bas Nieuwenhuizen Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 31 +++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 7a7316731911..dc50c05f23fc 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -837,6 +837,28 @@ static int convert_tiling_flags_to_modifier(struct amdgpu_framebuffer *afb) return 0; } +/* Mirrors the is_displayable check in radeonsi's gfx6_compute_surface */ +static int check_tiling_flags_gfx6(struct amdgpu_framebuffer *afb) +{ + u64 micro_tile_mode; + + /* Zero swizzle mode means linear */ + if (AMDGPU_TILING_GET(afb->tiling_flags, SWIZZLE_MODE) == 0) + return 0; + + micro_tile_mode = AMDGPU_TILING_GET(afb->tiling_flags, MICRO_TILE_MODE); + switch (micro_tile_mode) { + case 0: /* DISPLAY */ + case 3: /* RENDER */ + return 0; + default: + drm_dbg_kms(afb->base.dev, + "Micro tile mode %llu not supported for scanout\n", + micro_tile_mode); + return -EINVAL; + } +} + static void get_block_dimensions(unsigned int block_log2, unsigned int cpp, unsigned int *width, unsigned int *height) { @@ -1103,6 +1125,7 @@ int amdgpu_display_framebuffer_init(struct drm_device *dev, const struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object *obj) { + struct amdgpu_device *adev = drm_to_adev(dev); int ret, i; /* @@ -1122,6 +1145,14 @@ int amdgpu_display_framebuffer_init(struct drm_device *dev, if (ret) return ret; + if (!dev->mode_config.allow_fb_modifiers) { + drm_WARN_ONCE(dev, adev->family >= AMDGPU_FAMILY_AI, + "GFX9+ requires FB check based on format modifier\n"); + ret = check_tiling_flags_gfx6(rfb); + if (ret) + return ret; + } + if (dev->mode_config.allow_fb_modifiers && !(rfb->base.flags & DRM_MODE_FB_MODIFIERS)) { ret = convert_tiling_flags_to_modifier(rfb); -- cgit From 26db706a6d77b9e184feb11725e97e53b7a89519 Mon Sep 17 00:00:00 2001 From: Prike Liang Date: Wed, 25 Aug 2021 13:36:38 +0800 Subject: drm/amdgpu: force exit gfxoff on sdma resume for rmb s0ix In the s2idle stress test sdma resume fail occasionally,in the failed case GPU is in the gfxoff state.This issue may introduce by firmware miss handle doorbell S/R and now temporary fix the issue by forcing exit gfxoff for sdma resume. Signed-off-by: Prike Liang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c index 779f5c911e11..e32efcfb0c8b 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c @@ -868,6 +868,12 @@ static int sdma_v5_2_start(struct amdgpu_device *adev) msleep(1000); } + /* TODO: check whether can submit a doorbell request to raise + * a doorbell fence to exit gfxoff. + */ + if (adev->in_s0ix) + amdgpu_gfx_off_ctrl(adev, false); + sdma_v5_2_soft_reset(adev); /* unhalt the MEs */ sdma_v5_2_enable(adev, true); @@ -876,6 +882,8 @@ static int sdma_v5_2_start(struct amdgpu_device *adev) /* start the gfx rings and rlc compute queues */ r = sdma_v5_2_gfx_resume(adev); + if (adev->in_s0ix) + amdgpu_gfx_off_ctrl(adev, true); if (r) return r; r = sdma_v5_2_rlc_resume(adev); -- cgit From 9e28cfead2f8f5aba7df03c74c9ec645b5ffc5fd Mon Sep 17 00:00:00 2001 From: Cai Huoqing Date: Tue, 28 Sep 2021 21:48:49 +0800 Subject: net: mdio-ipq4019: Fix the error for an optional regs resource The second resource is optional which is only provided on the chipset IPQ5018. But the blamed commit ignores that and if the resource is not there it just fails. the resource is used like this, if (priv->eth_ldo_rdy) { val = readl(priv->eth_ldo_rdy); val |= BIT(0); writel(val, priv->eth_ldo_rdy); fsleep(IPQ_PHY_SET_DELAY_US); } This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: fa14d03e014a ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()") Signed-off-by: Cai Huoqing Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20210928134849.2092-1-caihuoqing@baidu.com Signed-off-by: Jakub Kicinski --- drivers/net/mdio/mdio-ipq4019.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/mdio/mdio-ipq4019.c b/drivers/net/mdio/mdio-ipq4019.c index 0d7d3e15d2f0..5f4cd24a0241 100644 --- a/drivers/net/mdio/mdio-ipq4019.c +++ b/drivers/net/mdio/mdio-ipq4019.c @@ -207,6 +207,7 @@ static int ipq4019_mdio_probe(struct platform_device *pdev) { struct ipq4019_mdio_data *priv; struct mii_bus *bus; + struct resource *res; int ret; bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv)); @@ -224,7 +225,10 @@ static int ipq4019_mdio_probe(struct platform_device *pdev) return PTR_ERR(priv->mdio_clk); /* The platform resource is provided on the chipset IPQ5018 */ - priv->eth_ldo_rdy = devm_platform_ioremap_resource(pdev, 1); + /* This resource is optional */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res) + priv->eth_ldo_rdy = devm_ioremap_resource(&pdev->dev, res); bus->name = "ipq4019_mdio"; bus->read = ipq4019_mdio_read; -- cgit From f936bb42aeb94a069bec7c9e04100d199c372956 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 28 Sep 2021 16:10:49 +0200 Subject: net: bridge: mcast: Associate the seqcount with its protecting lock. The sequence count bridge_mcast_querier::seq is protected by net_bridge::multicast_lock but seqcount_init() does not associate the seqcount with the lock. This leads to a warning on PREEMPT_RT because preemption is still enabled. Let seqcount_init() associate the seqcount with lock that protects the write section. Remove lockdep_assert_held_once() because lockdep already checks whether the associated lock is held. Fixes: 67b746f94ff39 ("net: bridge: mcast: make sure querier port/address updates are consistent") Reported-by: Mike Galbraith Signed-off-by: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Tested-by: Mike Galbraith Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20210928141049.593833-1-bigeasy@linutronix.de Signed-off-by: Jakub Kicinski --- net/bridge/br_multicast.c | 6 ++---- net/bridge/br_private.h | 2 +- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 3523c8c7068f..f3d751105343 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1677,8 +1677,6 @@ static void br_multicast_update_querier(struct net_bridge_mcast *brmctx, int ifindex, struct br_ip *saddr) { - lockdep_assert_held_once(&brmctx->br->multicast_lock); - write_seqcount_begin(&querier->seq); querier->port_ifidx = ifindex; memcpy(&querier->addr, saddr, sizeof(*saddr)); @@ -3867,13 +3865,13 @@ void br_multicast_ctx_init(struct net_bridge *br, brmctx->ip4_other_query.delay_time = 0; brmctx->ip4_querier.port_ifidx = 0; - seqcount_init(&brmctx->ip4_querier.seq); + seqcount_spinlock_init(&brmctx->ip4_querier.seq, &br->multicast_lock); brmctx->multicast_igmp_version = 2; #if IS_ENABLED(CONFIG_IPV6) brmctx->multicast_mld_version = 1; brmctx->ip6_other_query.delay_time = 0; brmctx->ip6_querier.port_ifidx = 0; - seqcount_init(&brmctx->ip6_querier.seq); + seqcount_spinlock_init(&brmctx->ip6_querier.seq, &br->multicast_lock); #endif timer_setup(&brmctx->ip4_mc_router_timer, diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index b4cef3a97f12..e8136db44462 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -82,7 +82,7 @@ struct bridge_mcast_other_query { struct bridge_mcast_querier { struct br_ip addr; int port_ifidx; - seqcount_t seq; + seqcount_spinlock_t seq; }; /* IGMP/MLD statistics */ -- cgit From 1018bf24550fd0feec14648309a0aeb62401f4dc Mon Sep 17 00:00:00 2001 From: Enzo Matsumiya Date: Tue, 28 Sep 2021 19:56:34 -0300 Subject: ksmbd: fix documentation for 2 functions ksmbd_kthread_fn() and create_socket() returns 0 or error code, and not task_struct/ERR_PTR. Signed-off-by: Enzo Matsumiya Acked-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/transport_tcp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ksmbd/transport_tcp.c b/fs/ksmbd/transport_tcp.c index dc15a5ecd2e0..c14320e03b69 100644 --- a/fs/ksmbd/transport_tcp.c +++ b/fs/ksmbd/transport_tcp.c @@ -215,7 +215,7 @@ out_error: * ksmbd_kthread_fn() - listen to new SMB connections and callback server * @p: arguments to forker thread * - * Return: Returns a task_struct or ERR_PTR + * Return: 0 on success, error number otherwise */ static int ksmbd_kthread_fn(void *p) { @@ -387,7 +387,7 @@ static void tcp_destroy_socket(struct socket *ksmbd_socket) /** * create_socket - create socket for ksmbd/0 * - * Return: Returns a task_struct or ERR_PTR + * Return: 0 on success, error number otherwise */ static int create_socket(struct interface *iface) { -- cgit From e8c2da7e329ce004fee748b921e4c765dc2fa338 Mon Sep 17 00:00:00 2001 From: Jonathan Hsu Date: Fri, 24 Sep 2021 16:58:48 +0800 Subject: scsi: ufs: Fix illegal offset in UPIU event trace Fix incorrect index for UTMRD reference in ufshcd_add_tm_upiu_trace(). Link: https://lore.kernel.org/r/20210924085848.25500-1-jonathan.hsu@mediatek.com Fixes: 4b42d557a8ad ("scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs") Cc: stable@vger.kernel.org Reviewed-by: Stanley Chu Reviewed-by: Bart Van Assche Signed-off-by: Jonathan Hsu Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 029c9631ec2b..188de6f91050 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -318,8 +318,7 @@ static void ufshcd_add_query_upiu_trace(struct ufs_hba *hba, static void ufshcd_add_tm_upiu_trace(struct ufs_hba *hba, unsigned int tag, enum ufs_trace_str_t str_t) { - int off = (int)tag - hba->nutrs; - struct utp_task_req_desc *descp = &hba->utmrdl_base_addr[off]; + struct utp_task_req_desc *descp = &hba->utmrdl_base_addr[tag]; if (!trace_ufshcd_upiu_enabled()) return; -- cgit From dd689ed5aa905daf4ba4c99319a52aad6ea0a796 Mon Sep 17 00:00:00 2001 From: Jiapeng Chong Date: Fri, 24 Sep 2021 17:51:53 +0800 Subject: scsi: ses: Fix unsigned comparison with less than zero Fix the following coccicheck warning: ./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared with zero: result > 0. Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Signed-off-by: Martin K. Petersen --- drivers/scsi/ses.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 43e682297fd5..0a1734f34587 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -118,7 +118,7 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code, static int ses_send_diag(struct scsi_device *sdev, int page_code, void *buf, int bufflen) { - u32 result; + int result; unsigned char cmd[] = { SEND_DIAGNOSTIC, -- cgit From cced4c0ec7c06f5230a2958907a409c849762293 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 25 Sep 2021 00:03:30 +0100 Subject: scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported" There are a couple of spelling mistakes in pr_info and pr_err messages. Fix them. Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen --- drivers/scsi/virtio_scsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index c25ce8f0e0af..07d0250f17c3 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -300,7 +300,7 @@ static void virtscsi_handle_transport_reset(struct virtio_scsi *vscsi, } break; default: - pr_info("Unsupport virtio scsi event reason %x\n", event->reason); + pr_info("Unsupported virtio scsi event reason %x\n", event->reason); } } @@ -392,7 +392,7 @@ static void virtscsi_handle_event(struct work_struct *work) virtscsi_handle_param_change(vscsi, event); break; default: - pr_err("Unsupport virtio scsi event %x\n", event->event); + pr_err("Unsupported virtio scsi event %x\n", event->event); } virtscsi_kick_event(vscsi, event_node); } -- cgit From 8e2d81c6b5be0d7629fb50b6f678fc07a4c58fae Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Fri, 24 Sep 2021 20:51:54 -0700 Subject: scsi: qla2xxx: Fix excessive messages during device logout Disable default logging of some I/O path messages. If desired, the messages can be turned back on by setting ql2xextended_error_logging. Link: https://lore.kernel.org/r/20210925035154.29815-1-njavali@marvell.com Reviewed-by: Ewan D. Milne Reviewed-by: Himanshu Madhani Signed-off-by: Arun Easi Signed-off-by: Nilesh Javali Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_isr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index ece60267b971..b26f2699adb2 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -2634,7 +2634,7 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, } if (unlikely(logit)) - ql_log(ql_log_warn, fcport->vha, 0x5060, + ql_log(ql_dbg_io, fcport->vha, 0x5060, "NVME-%s ERR Handling - hdl=%x status(%x) tr_len:%x resid=%x ox_id=%x\n", sp->name, sp->handle, comp_status, fd->transferred_length, le32_to_cpu(sts->residual_len), @@ -3491,7 +3491,7 @@ check_scsi_status: out: if (logit) - ql_log(ql_log_warn, fcport->vha, 0x3022, + ql_log(ql_dbg_io, fcport->vha, 0x3022, "FCP command status: 0x%x-0x%x (0x%x) nexus=%ld:%d:%llu portid=%02x%02x%02x oxid=0x%x cdb=%10phN len=0x%x rsp_info=0x%x resid=0x%x fw_resid=0x%x sp=%p cp=%p.\n", comp_status, scsi_status, res, vha->host_no, cp->device->id, cp->device->lun, fcport->d_id.b.domain, -- cgit From 79a7482249a7353bc86aff8127954d5febf02472 Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Mon, 27 Sep 2021 21:44:08 +0530 Subject: scsi: csiostor: Add module softdep on cxgb4 Both cxgb4 and csiostor drivers run on their own independent Physical Function. But when cxgb4 and csiostor are both being loaded in parallel via modprobe, there is a race when firmware upgrade is attempted by both the drivers. When the cxgb4 driver initiates the firmware upgrade, it halts the firmware and the chip until upgrade is complete. When the csiostor driver is coming up in parallel, the firmware mailbox communication fails with timeouts and the csiostor driver probe fails. Add a module soft dependency on cxgb4 driver to ensure loading csiostor triggers cxgb4 to load first when available to avoid the firmware upgrade race. Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver") Signed-off-by: Rahul Lakkireddy Signed-off-by: Martin K. Petersen --- drivers/scsi/csiostor/csio_init.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/csiostor/csio_init.c b/drivers/scsi/csiostor/csio_init.c index 390b07bf92b9..ccbded3353bd 100644 --- a/drivers/scsi/csiostor/csio_init.c +++ b/drivers/scsi/csiostor/csio_init.c @@ -1254,3 +1254,4 @@ MODULE_DEVICE_TABLE(pci, csio_pci_tbl); MODULE_VERSION(CSIO_DRV_VERSION); MODULE_FIRMWARE(FW_FNAME_T5); MODULE_FIRMWARE(FW_FNAME_T6); +MODULE_SOFTDEP("pre: cxgb4"); -- cgit From 513e605d7a9ce136886cb42ebb2c40e9a6eb6333 Mon Sep 17 00:00:00 2001 From: Feng Zhou Date: Tue, 28 Sep 2021 15:23:59 -0700 Subject: ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup The ixgbe driver currently generates a NULL pointer dereference with some machine (online cpus < 63). This is due to the fact that the maximum value of num_xdp_queues is nr_cpu_ids. Code is in "ixgbe_set_rss_queues"". Here's how the problem repeats itself: Some machine (online cpus < 63), And user set num_queues to 63 through ethtool. Code is in the "ixgbe_set_channels", adapter->ring_feature[RING_F_FDIR].limit = count; It becomes 63. When user use xdp, "ixgbe_set_rss_queues" will set queues num. adapter->num_rx_queues = rss_i; adapter->num_tx_queues = rss_i; adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); And rss_i's value is from f = &adapter->ring_feature[RING_F_FDIR]; rss_i = f->indices = f->limit; So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup", for (i = 0; i < adapter->num_rx_queues; i++) if (adapter->xdp_ring[i]->xsk_umem) It leads to panic. Call trace: [exception RIP: ixgbe_xdp+368] RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297 RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90 RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000 R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000 R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235 10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384 11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd 12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb 13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88 14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319 15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290 16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8 17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64 18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9 19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c So I fix ixgbe_max_channels so that it will not allow a setting of queues to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup, take the smaller value of num_rx_queues and num_xdp_queues. Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Feng Zhou Tested-by: Sandeep Penigalapati Signed-off-by: Tony Nguyen Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 2 +- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 8 ++++++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index fc26e4ddeb0d..beda8e0ef7d4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -3208,7 +3208,7 @@ static unsigned int ixgbe_max_channels(struct ixgbe_adapter *adapter) max_combined = ixgbe_max_rss_indices(adapter); } - return max_combined; + return min_t(int, max_combined, num_online_cpus()); } static void ixgbe_get_channels(struct net_device *dev, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 24e06ba6f5e9..13c4782b920a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -10112,6 +10112,7 @@ static int ixgbe_xdp_setup(struct net_device *dev, struct bpf_prog *prog) struct ixgbe_adapter *adapter = netdev_priv(dev); struct bpf_prog *old_prog; bool need_reset; + int num_queues; if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) return -EINVAL; @@ -10161,11 +10162,14 @@ static int ixgbe_xdp_setup(struct net_device *dev, struct bpf_prog *prog) /* Kick start the NAPI context if there is an AF_XDP socket open * on that queue id. This so that receiving will start. */ - if (need_reset && prog) - for (i = 0; i < adapter->num_rx_queues; i++) + if (need_reset && prog) { + num_queues = min_t(int, adapter->num_rx_queues, + adapter->num_xdp_queues); + for (i = 0; i < num_queues; i++) if (adapter->xdp_ring[i]->xsk_pool) (void)ixgbe_xsk_wakeup(adapter->netdev, i, XDP_WAKEUP_RX); + } return 0; } -- cgit From 5b09e88e1bf7fe86540fab4b5f3eece8abead39e Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 29 Sep 2021 17:35:49 +0800 Subject: net: hns3: do not allow call hns3_nic_net_open repeatedly hns3_nic_net_open() is not allowed to called repeatly, but there is no checking for this. When doing device reset and setup tc concurrently, there is a small oppotunity to call hns3_nic_net_open repeatedly, and cause kernel bug by calling napi_enable twice. The calltrace information is like below: [ 3078.222780] ------------[ cut here ]------------ [ 3078.230255] kernel BUG at net/core/dev.c:6991! [ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1 [ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021 [ 3078.276801] Workqueue: hclge hclge_service_task [hclge] [ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 3078.296168] pc : napi_enable+0x80/0x84 tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3] [ 3078.314771] sp : ffff8000108abb20 [ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300 [ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000 [ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880 [ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000 [ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930 [ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4 [ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8 [ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344 [ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938 [ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0 [ 3078.414657] Call trace: [ 3078.418517] napi_enable+0x80/0x84 [ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3] [ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3] [ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge] [ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge] [ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge] [ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge] [ 3078.475675] process_one_work+0x1dc/0x48c [ 3078.481888] worker_thread+0x15c/0x464 [ 3078.487104] kthread+0x160/0x170 [ 3078.492479] ret_from_fork+0x10/0x18 [ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000) [ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]--- Once hns3_nic_net_open() is excute success, the flag HNS3_NIC_STATE_DOWN will be cleared. So add checking for this flag, directly return when HNS3_NIC_STATE_DOWN is no set. Fixes: e888402789b9 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index adc54a726661..5637c075a894 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -779,6 +779,11 @@ static int hns3_nic_net_open(struct net_device *netdev) if (hns3_nic_resetting(netdev)) return -EBUSY; + if (!test_bit(HNS3_NIC_STATE_DOWN, &priv->state)) { + netdev_warn(netdev, "net open repeatedly!\n"); + return 0; + } + netif_carrier_off(netdev); ret = hns3_nic_set_real_num_queue(netdev); -- cgit From a8e76fefe3de9b8e609cf192af75e7878d21fa3a Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 29 Sep 2021 17:35:50 +0800 Subject: net: hns3: remove tc enable checking Currently, in function hns3_nic_set_real_num_queue(), the driver doesn't report the queue count and offset for disabled tc. If user enables multiple TCs, but only maps user priorities to partial of them, it may cause the queue range of the unmapped TC being displayed abnormally. Fix it by removing the tc enable checking, ensure the queue count is not zero. With this change, the tc_en is useless now, so remove it. Fixes: a75a8efa00c5 ("net: hns3: Fix tc setup when netdev is first up") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 - drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 11 ++--------- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 5 ----- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 -- 4 files changed, 2 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index 546a60530384..8ba21d6dc220 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -752,7 +752,6 @@ struct hnae3_tc_info { u8 prio_tc[HNAE3_MAX_USER_PRIO]; /* TC indexed by prio */ u16 tqp_count[HNAE3_MAX_TC]; u16 tqp_offset[HNAE3_MAX_TC]; - unsigned long tc_en; /* bitmap of TC enabled */ u8 num_tc; /* Total number of enabled TCs */ bool mqprio_active; }; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 5637c075a894..468b8f07bf47 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -623,13 +623,9 @@ static int hns3_nic_set_real_num_queue(struct net_device *netdev) return ret; } - for (i = 0; i < HNAE3_MAX_TC; i++) { - if (!test_bit(i, &tc_info->tc_en)) - continue; - + for (i = 0; i < tc_info->num_tc; i++) netdev_set_tc_queue(netdev, i, tc_info->tqp_count[i], tc_info->tqp_offset[i]); - } } ret = netif_set_real_num_tx_queues(netdev, queue_size); @@ -4870,12 +4866,9 @@ static void hns3_init_tx_ring_tc(struct hns3_nic_priv *priv) struct hnae3_tc_info *tc_info = &kinfo->tc_info; int i; - for (i = 0; i < HNAE3_MAX_TC; i++) { + for (i = 0; i < tc_info->num_tc; i++) { int j; - if (!test_bit(i, &tc_info->tc_en)) - continue; - for (j = 0; j < tc_info->tqp_count[i]; j++) { struct hnae3_queue *q; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c index 4a619e5d3f35..96f96644abab 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c @@ -441,8 +441,6 @@ static int hclge_mqprio_qopt_check(struct hclge_dev *hdev, static void hclge_sync_mqprio_qopt(struct hnae3_tc_info *tc_info, struct tc_mqprio_qopt_offload *mqprio_qopt) { - int i; - memset(tc_info, 0, sizeof(*tc_info)); tc_info->num_tc = mqprio_qopt->qopt.num_tc; memcpy(tc_info->prio_tc, mqprio_qopt->qopt.prio_tc_map, @@ -451,9 +449,6 @@ static void hclge_sync_mqprio_qopt(struct hnae3_tc_info *tc_info, sizeof_field(struct hnae3_tc_info, tqp_count)); memcpy(tc_info->tqp_offset, mqprio_qopt->qopt.offset, sizeof_field(struct hnae3_tc_info, tqp_offset)); - - for (i = 0; i < HNAE3_MAX_USER_PRIO; i++) - set_bit(tc_info->prio_tc[i], &tc_info->tc_en); } static int hclge_config_tc(struct hclge_dev *hdev, diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 44618cc4cca1..6f5035a788c0 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -687,12 +687,10 @@ static void hclge_tm_vport_tc_info_update(struct hclge_vport *vport) for (i = 0; i < HNAE3_MAX_TC; i++) { if (hdev->hw_tc_map & BIT(i) && i < kinfo->tc_info.num_tc) { - set_bit(i, &kinfo->tc_info.tc_en); kinfo->tc_info.tqp_offset[i] = i * kinfo->rss_size; kinfo->tc_info.tqp_count[i] = kinfo->rss_size; } else { /* Set to default queue if TC is disable */ - clear_bit(i, &kinfo->tc_info.tc_en); kinfo->tc_info.tqp_offset[i] = 0; kinfo->tc_info.tqp_count[i] = 1; } -- cgit From d82650be60ee92e7486f755f5387023278aa933f Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 29 Sep 2021 17:35:51 +0800 Subject: net: hns3: don't rollback when destroy mqprio fail For destroy mqprio is irreversible in stack, so it's unnecessary to rollback the tc configuration when destroy mqprio failed. Otherwise, it may cause the configuration being inconsistent between driver and netstack. As the failure is usually caused by reset, and the driver will restore the configuration after reset, so it can keep the configuration being consistent between driver and hardware. Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c index 96f96644abab..351b8f179a29 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c @@ -514,12 +514,17 @@ static int hclge_setup_tc(struct hnae3_handle *h, return hclge_notify_init_up(hdev); err_out: - /* roll-back */ - memcpy(&kinfo->tc_info, &old_tc_info, sizeof(old_tc_info)); - if (hclge_config_tc(hdev, &kinfo->tc_info)) - dev_err(&hdev->pdev->dev, - "failed to roll back tc configuration\n"); - + if (!tc) { + dev_warn(&hdev->pdev->dev, + "failed to destroy mqprio, will active after reset, ret = %d\n", + ret); + } else { + /* roll-back */ + memcpy(&kinfo->tc_info, &old_tc_info, sizeof(old_tc_info)); + if (hclge_config_tc(hdev, &kinfo->tc_info)) + dev_err(&hdev->pdev->dev, + "failed to roll back tc configuration\n"); + } hclge_notify_init_up(hdev); return ret; -- cgit From 0472e95ffeac8e61259eec17ab61608c6b35599d Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 29 Sep 2021 17:35:52 +0800 Subject: net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is supposed to set when enable multiple TCs with ets. But the driver mixed the flags when updating the tm configuration. Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE too, so remove the unnecessary limitation. Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 7 +++-- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 31 ++++------------------ 2 files changed, 10 insertions(+), 28 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c index 351b8f179a29..307c9e830510 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c @@ -247,6 +247,10 @@ static int hclge_ieee_setets(struct hnae3_handle *h, struct ieee_ets *ets) } hclge_tm_schd_info_update(hdev, num_tc); + if (num_tc > 1) + hdev->flag |= HCLGE_FLAG_DCB_ENABLE; + else + hdev->flag &= ~HCLGE_FLAG_DCB_ENABLE; ret = hclge_ieee_ets_to_tm_info(hdev, ets); if (ret) @@ -306,8 +310,7 @@ static int hclge_ieee_setpfc(struct hnae3_handle *h, struct ieee_pfc *pfc) u8 i, j, pfc_map, *prio_tc; int ret; - if (!(hdev->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) || - hdev->flag & HCLGE_FLAG_MQPRIO_ENABLE) + if (!(hdev->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)) return -EINVAL; if (pfc->pfc_en == hdev->tm_info.pfc_en) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 6f5035a788c0..f314dbd3ce11 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -727,14 +727,6 @@ static void hclge_tm_tc_info_init(struct hclge_dev *hdev) for (i = 0; i < HNAE3_MAX_USER_PRIO; i++) hdev->tm_info.prio_tc[i] = (i >= hdev->tm_info.num_tc) ? 0 : i; - - /* DCB is enabled if we have more than 1 TC or pfc_en is - * non-zero. - */ - if (hdev->tm_info.num_tc > 1 || hdev->tm_info.pfc_en) - hdev->flag |= HCLGE_FLAG_DCB_ENABLE; - else - hdev->flag &= ~HCLGE_FLAG_DCB_ENABLE; } static void hclge_tm_pg_info_init(struct hclge_dev *hdev) @@ -765,10 +757,10 @@ static void hclge_tm_pg_info_init(struct hclge_dev *hdev) static void hclge_update_fc_mode_by_dcb_flag(struct hclge_dev *hdev) { - if (!(hdev->flag & HCLGE_FLAG_DCB_ENABLE)) { + if (hdev->tm_info.num_tc == 1 && !hdev->tm_info.pfc_en) { if (hdev->fc_mode_last_time == HCLGE_FC_PFC) dev_warn(&hdev->pdev->dev, - "DCB is disable, but last mode is FC_PFC\n"); + "Only 1 tc used, but last mode is FC_PFC\n"); hdev->tm_info.fc_mode = hdev->fc_mode_last_time; } else if (hdev->tm_info.fc_mode != HCLGE_FC_PFC) { @@ -794,7 +786,7 @@ static void hclge_update_fc_mode(struct hclge_dev *hdev) } } -static void hclge_pfc_info_init(struct hclge_dev *hdev) +void hclge_tm_pfc_info_update(struct hclge_dev *hdev) { if (hdev->ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V3) hclge_update_fc_mode(hdev); @@ -810,7 +802,7 @@ static void hclge_tm_schd_info_init(struct hclge_dev *hdev) hclge_tm_vport_info_update(hdev); - hclge_pfc_info_init(hdev); + hclge_tm_pfc_info_update(hdev); } static int hclge_tm_pg_to_pri_map(struct hclge_dev *hdev) @@ -1556,19 +1548,6 @@ void hclge_tm_schd_info_update(struct hclge_dev *hdev, u8 num_tc) hclge_tm_schd_info_init(hdev); } -void hclge_tm_pfc_info_update(struct hclge_dev *hdev) -{ - /* DCB is enabled if we have more than 1 TC or pfc_en is - * non-zero. - */ - if (hdev->tm_info.num_tc > 1 || hdev->tm_info.pfc_en) - hdev->flag |= HCLGE_FLAG_DCB_ENABLE; - else - hdev->flag &= ~HCLGE_FLAG_DCB_ENABLE; - - hclge_pfc_info_init(hdev); -} - int hclge_tm_init_hw(struct hclge_dev *hdev, bool init) { int ret; @@ -1614,7 +1593,7 @@ int hclge_tm_vport_map_update(struct hclge_dev *hdev) if (ret) return ret; - if (!(hdev->flag & HCLGE_FLAG_DCB_ENABLE)) + if (hdev->tm_info.num_tc == 1 && !hdev->tm_info.pfc_en) return 0; return hclge_tm_bp_setup(hdev); -- cgit From 108b3c7810e14892c4a1819b1d268a2c785c087c Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 29 Sep 2021 17:35:53 +0800 Subject: net: hns3: fix show wrong state when add existing uc mac address Currently, if function adds an existing unicast mac address, eventhough driver will not add this address into hardware, but it will return 0 in function hclge_add_uc_addr_common(). It will cause the state of this unicast mac address is ACTIVE in driver, but it should be in TO-ADD state. To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST if mac address is existing, and delete two error log to avoid printing them all the time after this modification. Fixes: 72110b567479 ("net: hns3: return 0 and print warning when hit duplicate MAC") Signed-off-by: Jian Shen Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 47fea8985861..3391244d9d3d 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -8708,15 +8708,8 @@ int hclge_add_uc_addr_common(struct hclge_vport *vport, } /* check if we just hit the duplicate */ - if (!ret) { - dev_warn(&hdev->pdev->dev, "VF %u mac(%pM) exists\n", - vport->vport_id, addr); - return 0; - } - - dev_err(&hdev->pdev->dev, - "PF failed to add unicast entry(%pM) in the MAC table\n", - addr); + if (!ret) + return -EEXIST; return ret; } @@ -8868,7 +8861,13 @@ static void hclge_sync_vport_mac_list(struct hclge_vport *vport, } else { set_bit(HCLGE_VPORT_STATE_MAC_TBL_CHANGE, &vport->state); - break; + + /* If one unicast mac address is existing in hardware, + * we need to try whether other unicast mac addresses + * are new addresses that can be added. + */ + if (ret != -EEXIST) + break; } } } -- cgit From 276e60421668d019dc655973b1832ea354c0f36c Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Wed, 29 Sep 2021 17:35:54 +0800 Subject: net: hns3: PF enable promisc for VF when mac table is overflow If unicast mac address table is full, and user add a new mac address, the unicast promisc needs to be enabled for the new unicast mac address can be used. So does the multicast promisc. Now this feature has been implemented for PF, and VF should be implemented too. When the mac table of VF is overflow, PF will enable promisc for this VF. Fixes: 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously") Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 3391244d9d3d..f5b8d1fee0f1 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -12796,8 +12796,12 @@ static void hclge_sync_promisc_mode(struct hclge_dev *hdev) continue; if (vport->vf_info.trusted) { - uc_en = vport->vf_info.request_uc_en > 0; - mc_en = vport->vf_info.request_mc_en > 0; + uc_en = vport->vf_info.request_uc_en > 0 || + vport->overflow_promisc_flags & + HNAE3_OVERFLOW_UPE; + mc_en = vport->vf_info.request_mc_en > 0 || + vport->overflow_promisc_flags & + HNAE3_OVERFLOW_MPE; } bc_en = vport->vf_info.request_bc_en > 0; -- cgit From 27bf4af69fcb9845fb2f0076db5d562ec072e70f Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Wed, 29 Sep 2021 17:35:55 +0800 Subject: net: hns3: fix always enable rx vlan filter problem after selftest Currently, the rx vlan filter will always be disabled before selftest and be enabled after selftest as the rx vlan filter feature is fixed on in old device earlier than V3. However, this feature is not fixed in some new devices and it can be disabled by user. In this case, it is wrong if rx vlan filter is enabled after selftest. So fix it. Fixes: bcc26e8dc432 ("net: hns3: remove unused code in hns3_self_test()") Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c index 7ea511d59e91..5ebd96f6833d 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c @@ -334,7 +334,8 @@ static void hns3_selftest_prepare(struct net_device *ndev, #if IS_ENABLED(CONFIG_VLAN_8021Q) /* Disable the vlan filter for selftest does not support it */ - if (h->ae_algo->ops->enable_vlan_filter) + if (h->ae_algo->ops->enable_vlan_filter && + ndev->features & NETIF_F_HW_VLAN_CTAG_FILTER) h->ae_algo->ops->enable_vlan_filter(h, false); #endif @@ -359,7 +360,8 @@ static void hns3_selftest_restore(struct net_device *ndev, bool if_running) h->ae_algo->ops->halt_autoneg(h, false); #if IS_ENABLED(CONFIG_VLAN_8021Q) - if (h->ae_algo->ops->enable_vlan_filter) + if (h->ae_algo->ops->enable_vlan_filter && + ndev->features & NETIF_F_HW_VLAN_CTAG_FILTER) h->ae_algo->ops->enable_vlan_filter(h, true); #endif -- cgit From 0178839ccca36dee238a57e7f4c3c252f5dbbba6 Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Wed, 29 Sep 2021 17:35:56 +0800 Subject: net: hns3: disable firmware compatible features when uninstall PF Currently, the firmware compatible features are enabled in PF driver initialization process, but they are not disabled in PF driver deinitialization process and firmware keeps these features in enabled status. In this case, if load an old PF driver (for example, in VM) which not support the firmware compatible features, firmware will still send mailbox message to PF when link status changed and PF will print "un-supported mailbox message, code = 201". To fix this problem, disable these firmware compatible features in PF driver deinitialization process. Fixes: ed8fb4b262ae ("net: hns3: add link change event report") Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c index ac9b69513332..9c2eeaa82294 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c @@ -467,7 +467,7 @@ err_csq: return ret; } -static int hclge_firmware_compat_config(struct hclge_dev *hdev) +static int hclge_firmware_compat_config(struct hclge_dev *hdev, bool en) { struct hclge_firmware_compat_cmd *req; struct hclge_desc desc; @@ -475,13 +475,16 @@ static int hclge_firmware_compat_config(struct hclge_dev *hdev) hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_IMP_COMPAT_CFG, false); - req = (struct hclge_firmware_compat_cmd *)desc.data; + if (en) { + req = (struct hclge_firmware_compat_cmd *)desc.data; - hnae3_set_bit(compat, HCLGE_LINK_EVENT_REPORT_EN_B, 1); - hnae3_set_bit(compat, HCLGE_NCSI_ERROR_REPORT_EN_B, 1); - if (hnae3_dev_phy_imp_supported(hdev)) - hnae3_set_bit(compat, HCLGE_PHY_IMP_EN_B, 1); - req->compat = cpu_to_le32(compat); + hnae3_set_bit(compat, HCLGE_LINK_EVENT_REPORT_EN_B, 1); + hnae3_set_bit(compat, HCLGE_NCSI_ERROR_REPORT_EN_B, 1); + if (hnae3_dev_phy_imp_supported(hdev)) + hnae3_set_bit(compat, HCLGE_PHY_IMP_EN_B, 1); + + req->compat = cpu_to_le32(compat); + } return hclge_cmd_send(&hdev->hw, &desc, 1); } @@ -538,7 +541,7 @@ int hclge_cmd_init(struct hclge_dev *hdev) /* ask the firmware to enable some features, driver can work without * it. */ - ret = hclge_firmware_compat_config(hdev); + ret = hclge_firmware_compat_config(hdev, true); if (ret) dev_warn(&hdev->pdev->dev, "Firmware compatible features not enabled(%d).\n", @@ -568,6 +571,8 @@ static void hclge_cmd_uninit_regs(struct hclge_hw *hw) void hclge_cmd_uninit(struct hclge_dev *hdev) { + hclge_firmware_compat_config(hdev, false); + set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state); /* wait to ensure that the firmware completes the possible left * over commands. -- cgit From d88fd1b546ff19c8040cfaea76bf16aed1c5a0bb Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 28 Sep 2021 13:32:33 -0700 Subject: net: phy: bcm7xxx: Fixed indirect MMD operations When EEE support was added to the 28nm EPHY it was assumed that it would be able to support the standard clause 45 over clause 22 register access method. It turns out that the PHY does not support that, which is the very reason for using the indirect shadow mode 2 bank 3 access method. Implement {read,write}_mmd to allow the standard PHY library routines pertaining to EEE querying and configuration to work correctly on these PHYs. This forces us to implement a __phy_set_clr_bits() function that does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd functions are always called with that lock held. Fixes: 83ee102a6998 ("net: phy: bcm7xxx: add support for 28nm EPHY") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/bcm7xxx.c | 114 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 110 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index e79297a4bae8..27b6a3f507ae 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -27,7 +27,12 @@ #define MII_BCM7XXX_SHD_2_ADDR_CTRL 0xe #define MII_BCM7XXX_SHD_2_CTRL_STAT 0xf #define MII_BCM7XXX_SHD_2_BIAS_TRIM 0x1a +#define MII_BCM7XXX_SHD_3_PCS_CTRL 0x0 +#define MII_BCM7XXX_SHD_3_PCS_STATUS 0x1 +#define MII_BCM7XXX_SHD_3_EEE_CAP 0x2 #define MII_BCM7XXX_SHD_3_AN_EEE_ADV 0x3 +#define MII_BCM7XXX_SHD_3_EEE_LP 0x4 +#define MII_BCM7XXX_SHD_3_EEE_WK_ERR 0x5 #define MII_BCM7XXX_SHD_3_PCS_CTRL_2 0x6 #define MII_BCM7XXX_PCS_CTRL_2_DEF 0x4400 #define MII_BCM7XXX_SHD_3_AN_STAT 0xb @@ -216,25 +221,37 @@ static int bcm7xxx_28nm_resume(struct phy_device *phydev) return genphy_config_aneg(phydev); } -static int phy_set_clr_bits(struct phy_device *dev, int location, - int set_mask, int clr_mask) +static int __phy_set_clr_bits(struct phy_device *dev, int location, + int set_mask, int clr_mask) { int v, ret; - v = phy_read(dev, location); + v = __phy_read(dev, location); if (v < 0) return v; v &= ~clr_mask; v |= set_mask; - ret = phy_write(dev, location, v); + ret = __phy_write(dev, location, v); if (ret < 0) return ret; return v; } +static int phy_set_clr_bits(struct phy_device *dev, int location, + int set_mask, int clr_mask) +{ + int ret; + + mutex_lock(&dev->mdio.bus->mdio_lock); + ret = __phy_set_clr_bits(dev, location, set_mask, clr_mask); + mutex_unlock(&dev->mdio.bus->mdio_lock); + + return ret; +} + static int bcm7xxx_28nm_ephy_01_afe_config_init(struct phy_device *phydev) { int ret; @@ -398,6 +415,93 @@ static int bcm7xxx_28nm_ephy_config_init(struct phy_device *phydev) return bcm7xxx_28nm_ephy_apd_enable(phydev); } +#define MII_BCM7XXX_REG_INVALID 0xff + +static u8 bcm7xxx_28nm_ephy_regnum_to_shd(u16 regnum) +{ + switch (regnum) { + case MDIO_CTRL1: + return MII_BCM7XXX_SHD_3_PCS_CTRL; + case MDIO_STAT1: + return MII_BCM7XXX_SHD_3_PCS_STATUS; + case MDIO_PCS_EEE_ABLE: + return MII_BCM7XXX_SHD_3_EEE_CAP; + case MDIO_AN_EEE_ADV: + return MII_BCM7XXX_SHD_3_AN_EEE_ADV; + case MDIO_AN_EEE_LPABLE: + return MII_BCM7XXX_SHD_3_EEE_LP; + case MDIO_PCS_EEE_WK_ERR: + return MII_BCM7XXX_SHD_3_EEE_WK_ERR; + default: + return MII_BCM7XXX_REG_INVALID; + } +} + +static bool bcm7xxx_28nm_ephy_dev_valid(int devnum) +{ + return devnum == MDIO_MMD_AN || devnum == MDIO_MMD_PCS; +} + +static int bcm7xxx_28nm_ephy_read_mmd(struct phy_device *phydev, + int devnum, u16 regnum) +{ + u8 shd = bcm7xxx_28nm_ephy_regnum_to_shd(regnum); + int ret; + + if (!bcm7xxx_28nm_ephy_dev_valid(devnum) || + shd == MII_BCM7XXX_REG_INVALID) + return -EOPNOTSUPP; + + /* set shadow mode 2 */ + ret = __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, 0); + if (ret < 0) + return ret; + + /* Access the desired shadow register address */ + ret = __phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, shd); + if (ret < 0) + goto reset_shadow_mode; + + ret = __phy_read(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT); + +reset_shadow_mode: + /* reset shadow mode 2 */ + __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, + MII_BCM7XXX_SHD_MODE_2); + return ret; +} + +static int bcm7xxx_28nm_ephy_write_mmd(struct phy_device *phydev, + int devnum, u16 regnum, u16 val) +{ + u8 shd = bcm7xxx_28nm_ephy_regnum_to_shd(regnum); + int ret; + + if (!bcm7xxx_28nm_ephy_dev_valid(devnum) || + shd == MII_BCM7XXX_REG_INVALID) + return -EOPNOTSUPP; + + /* set shadow mode 2 */ + ret = __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, 0); + if (ret < 0) + return ret; + + /* Access the desired shadow register address */ + ret = __phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, shd); + if (ret < 0) + goto reset_shadow_mode; + + /* Write the desired value in the shadow register */ + __phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, val); + +reset_shadow_mode: + /* reset shadow mode 2 */ + return __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, + MII_BCM7XXX_SHD_MODE_2); +} + static int bcm7xxx_28nm_ephy_resume(struct phy_device *phydev) { int ret; @@ -595,6 +699,8 @@ static void bcm7xxx_28nm_remove(struct phy_device *phydev) .get_stats = bcm7xxx_28nm_get_phy_stats, \ .probe = bcm7xxx_28nm_probe, \ .remove = bcm7xxx_28nm_remove, \ + .read_mmd = bcm7xxx_28nm_ephy_read_mmd, \ + .write_mmd = bcm7xxx_28nm_ephy_write_mmd, \ } #define BCM7XXX_40NM_EPHY(_oui, _name) \ -- cgit From 540cffbab8b8e6c52a4121666ca18d6e94586ed2 Mon Sep 17 00:00:00 2001 From: Andrey Gusakov Date: Thu, 23 Sep 2021 20:22:16 +0300 Subject: gpio: pca953x: do not ignore i2c errors Per gpio_chip interface, error shall be proparated to the caller. Attempt to silent diagnostics by returning zero (as written in the comment) is plain wrong, because the zero return can be interpreted by the caller as the gpio value. Cc: stable@vger.kernel.org Signed-off-by: Andrey Gusakov Signed-off-by: Nikita Yushchenko Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-pca953x.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index f5cfc0698799..8ebf369b3ba0 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -468,15 +468,8 @@ static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off) mutex_lock(&chip->i2c_lock); ret = regmap_read(chip->regmap, inreg, ®_val); mutex_unlock(&chip->i2c_lock); - if (ret < 0) { - /* - * NOTE: - * diagnostic already emitted; that's all we should - * do unless gpio_*_value_cansleep() calls become different - * from their nonsleeping siblings (and report faults). - */ - return 0; - } + if (ret < 0) + return ret; return !!(reg_val & bit); } -- cgit From d1d598104336075e7475d932d200b33108399225 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 20 Sep 2021 09:18:37 +0200 Subject: MAINTAINERS: update my email address My professional situation changes soon. Update my email address. Signed-off-by: Bartosz Golaszewski Reviewed-by: Linus Walleij Acked-by: Andy Shevchenko --- MAINTAINERS | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5b33791bb8e9..4b98ca39c803 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2961,7 +2961,7 @@ F: crypto/async_tx/ F: include/linux/async_tx.h AT24 EEPROM DRIVER -M: Bartosz Golaszewski +M: Bartosz Golaszewski L: linux-i2c@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git @@ -7985,7 +7985,7 @@ F: include/linux/gpio/regmap.h GPIO SUBSYSTEM M: Linus Walleij -M: Bartosz Golaszewski +M: Bartosz Golaszewski L: linux-gpio@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git @@ -11366,7 +11366,7 @@ F: Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml F: drivers/iio/proximity/mb1232.c MAXIM MAX77650 PMIC MFD DRIVER -M: Bartosz Golaszewski +M: Bartosz Golaszewski L: linux-kernel@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/*/*max77650.yaml @@ -18682,7 +18682,7 @@ F: include/linux/clk/ti.h TI DAVINCI MACHINE SUPPORT M: Sekhar Nori -R: Bartosz Golaszewski +R: Bartosz Golaszewski L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git -- cgit From 040d985e27dc39353d50d0f75a6be3330f4fece2 Mon Sep 17 00:00:00 2001 From: Mun Yew Tham Date: Wed, 29 Sep 2021 08:49:11 +0800 Subject: MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer Update Altera Pio Driver maintainer's email from to Signed-off-by: Mun Yew Tham Acked-by: Joyce Ooi Signed-off-by: Bartosz Golaszewski --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4b98ca39c803..01ff450dda42 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -810,7 +810,7 @@ F: Documentation/devicetree/bindings/dma/altr,msgdma.yaml F: drivers/dma/altera-msgdma.c ALTERA PIO DRIVER -M: Joyce Ooi +M: Mun Yew Tham L: linux-gpio@vger.kernel.org S: Maintained F: drivers/gpio/gpio-altera.c -- cgit From ce812992f239f45e13c820a52455fec6eacbce1e Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 27 Sep 2021 21:47:48 +0900 Subject: ksmbd: remove NTLMv1 authentication MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove insecure NTLMv1 authentication. Cc: Ronnie Sahlberg Cc: Ralph Böhme Reviewed-by: Tom Talpey Acked-by: Steve French Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/auth.c | 205 -------------------------------------------------- fs/ksmbd/crypto_ctx.c | 16 ---- fs/ksmbd/crypto_ctx.h | 8 -- 3 files changed, 229 deletions(-) diff --git a/fs/ksmbd/auth.c b/fs/ksmbd/auth.c index de36f12070bf..71c989f1568d 100644 --- a/fs/ksmbd/auth.c +++ b/fs/ksmbd/auth.c @@ -68,125 +68,6 @@ void ksmbd_copy_gss_neg_header(void *buf) memcpy(buf, NEGOTIATE_GSS_HEADER, AUTH_GSS_LENGTH); } -static void -str_to_key(unsigned char *str, unsigned char *key) -{ - int i; - - key[0] = str[0] >> 1; - key[1] = ((str[0] & 0x01) << 6) | (str[1] >> 2); - key[2] = ((str[1] & 0x03) << 5) | (str[2] >> 3); - key[3] = ((str[2] & 0x07) << 4) | (str[3] >> 4); - key[4] = ((str[3] & 0x0F) << 3) | (str[4] >> 5); - key[5] = ((str[4] & 0x1F) << 2) | (str[5] >> 6); - key[6] = ((str[5] & 0x3F) << 1) | (str[6] >> 7); - key[7] = str[6] & 0x7F; - for (i = 0; i < 8; i++) - key[i] = (key[i] << 1); -} - -static int -smbhash(unsigned char *out, const unsigned char *in, unsigned char *key) -{ - unsigned char key2[8]; - struct des_ctx ctx; - - if (fips_enabled) { - ksmbd_debug(AUTH, "FIPS compliance enabled: DES not permitted\n"); - return -ENOENT; - } - - str_to_key(key, key2); - des_expand_key(&ctx, key2, DES_KEY_SIZE); - des_encrypt(&ctx, out, in); - memzero_explicit(&ctx, sizeof(ctx)); - return 0; -} - -static int ksmbd_enc_p24(unsigned char *p21, const unsigned char *c8, unsigned char *p24) -{ - int rc; - - rc = smbhash(p24, c8, p21); - if (rc) - return rc; - rc = smbhash(p24 + 8, c8, p21 + 7); - if (rc) - return rc; - return smbhash(p24 + 16, c8, p21 + 14); -} - -/* produce a md4 message digest from data of length n bytes */ -static int ksmbd_enc_md4(unsigned char *md4_hash, unsigned char *link_str, - int link_len) -{ - int rc; - struct ksmbd_crypto_ctx *ctx; - - ctx = ksmbd_crypto_ctx_find_md4(); - if (!ctx) { - ksmbd_debug(AUTH, "Crypto md4 allocation error\n"); - return -ENOMEM; - } - - rc = crypto_shash_init(CRYPTO_MD4(ctx)); - if (rc) { - ksmbd_debug(AUTH, "Could not init md4 shash\n"); - goto out; - } - - rc = crypto_shash_update(CRYPTO_MD4(ctx), link_str, link_len); - if (rc) { - ksmbd_debug(AUTH, "Could not update with link_str\n"); - goto out; - } - - rc = crypto_shash_final(CRYPTO_MD4(ctx), md4_hash); - if (rc) - ksmbd_debug(AUTH, "Could not generate md4 hash\n"); -out: - ksmbd_release_crypto_ctx(ctx); - return rc; -} - -static int ksmbd_enc_update_sess_key(unsigned char *md5_hash, char *nonce, - char *server_challenge, int len) -{ - int rc; - struct ksmbd_crypto_ctx *ctx; - - ctx = ksmbd_crypto_ctx_find_md5(); - if (!ctx) { - ksmbd_debug(AUTH, "Crypto md5 allocation error\n"); - return -ENOMEM; - } - - rc = crypto_shash_init(CRYPTO_MD5(ctx)); - if (rc) { - ksmbd_debug(AUTH, "Could not init md5 shash\n"); - goto out; - } - - rc = crypto_shash_update(CRYPTO_MD5(ctx), server_challenge, len); - if (rc) { - ksmbd_debug(AUTH, "Could not update with challenge\n"); - goto out; - } - - rc = crypto_shash_update(CRYPTO_MD5(ctx), nonce, len); - if (rc) { - ksmbd_debug(AUTH, "Could not update with nonce\n"); - goto out; - } - - rc = crypto_shash_final(CRYPTO_MD5(ctx), md5_hash); - if (rc) - ksmbd_debug(AUTH, "Could not generate md5 hash\n"); -out: - ksmbd_release_crypto_ctx(ctx); - return rc; -} - /** * ksmbd_gen_sess_key() - function to generate session key * @sess: session of connection @@ -324,43 +205,6 @@ out: return ret; } -/** - * ksmbd_auth_ntlm() - NTLM authentication handler - * @sess: session of connection - * @pw_buf: NTLM challenge response - * @passkey: user password - * - * Return: 0 on success, error number on error - */ -int ksmbd_auth_ntlm(struct ksmbd_session *sess, char *pw_buf) -{ - int rc; - unsigned char p21[21]; - char key[CIFS_AUTH_RESP_SIZE]; - - memset(p21, '\0', 21); - memcpy(p21, user_passkey(sess->user), CIFS_NTHASH_SIZE); - rc = ksmbd_enc_p24(p21, sess->ntlmssp.cryptkey, key); - if (rc) { - pr_err("password processing failed\n"); - return rc; - } - - ksmbd_enc_md4(sess->sess_key, user_passkey(sess->user), - CIFS_SMB1_SESSKEY_SIZE); - memcpy(sess->sess_key + CIFS_SMB1_SESSKEY_SIZE, key, - CIFS_AUTH_RESP_SIZE); - sess->sequence_number = 1; - - if (strncmp(pw_buf, key, CIFS_AUTH_RESP_SIZE) != 0) { - ksmbd_debug(AUTH, "ntlmv1 authentication failed\n"); - return -EINVAL; - } - - ksmbd_debug(AUTH, "ntlmv1 authentication pass\n"); - return 0; -} - /** * ksmbd_auth_ntlmv2() - NTLMv2 authentication handler * @sess: session of connection @@ -441,44 +285,6 @@ out: return rc; } -/** - * __ksmbd_auth_ntlmv2() - NTLM2(extended security) authentication handler - * @sess: session of connection - * @client_nonce: client nonce from LM response. - * @ntlm_resp: ntlm response data from client. - * - * Return: 0 on success, error number on error - */ -static int __ksmbd_auth_ntlmv2(struct ksmbd_session *sess, char *client_nonce, - char *ntlm_resp) -{ - char sess_key[CIFS_SMB1_SESSKEY_SIZE] = {0}; - int rc; - unsigned char p21[21]; - char key[CIFS_AUTH_RESP_SIZE]; - - rc = ksmbd_enc_update_sess_key(sess_key, - client_nonce, - (char *)sess->ntlmssp.cryptkey, 8); - if (rc) { - pr_err("password processing failed\n"); - goto out; - } - - memset(p21, '\0', 21); - memcpy(p21, user_passkey(sess->user), CIFS_NTHASH_SIZE); - rc = ksmbd_enc_p24(p21, sess_key, key); - if (rc) { - pr_err("password processing failed\n"); - goto out; - } - - if (memcmp(ntlm_resp, key, CIFS_AUTH_RESP_SIZE) != 0) - rc = -EINVAL; -out: - return rc; -} - /** * ksmbd_decode_ntlmssp_auth_blob() - helper function to construct * authenticate blob @@ -512,17 +318,6 @@ int ksmbd_decode_ntlmssp_auth_blob(struct authenticate_message *authblob, nt_off = le32_to_cpu(authblob->NtChallengeResponse.BufferOffset); nt_len = le16_to_cpu(authblob->NtChallengeResponse.Length); - /* process NTLM authentication */ - if (nt_len == CIFS_AUTH_RESP_SIZE) { - if (le32_to_cpu(authblob->NegotiateFlags) & - NTLMSSP_NEGOTIATE_EXTENDED_SEC) - return __ksmbd_auth_ntlmv2(sess, (char *)authblob + - lm_off, (char *)authblob + nt_off); - else - return ksmbd_auth_ntlm(sess, (char *)authblob + - nt_off); - } - /* TODO : use domain name that imported from configuration file */ domain_name = smb_strndup_from_utf16((const char *)authblob + le32_to_cpu(authblob->DomainName.BufferOffset), diff --git a/fs/ksmbd/crypto_ctx.c b/fs/ksmbd/crypto_ctx.c index 5f4b1008d17e..81488d04199d 100644 --- a/fs/ksmbd/crypto_ctx.c +++ b/fs/ksmbd/crypto_ctx.c @@ -81,12 +81,6 @@ static struct shash_desc *alloc_shash_desc(int id) case CRYPTO_SHASH_SHA512: tfm = crypto_alloc_shash("sha512", 0, 0); break; - case CRYPTO_SHASH_MD4: - tfm = crypto_alloc_shash("md4", 0, 0); - break; - case CRYPTO_SHASH_MD5: - tfm = crypto_alloc_shash("md5", 0, 0); - break; default: return NULL; } @@ -214,16 +208,6 @@ struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_sha512(void) return ____crypto_shash_ctx_find(CRYPTO_SHASH_SHA512); } -struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_md4(void) -{ - return ____crypto_shash_ctx_find(CRYPTO_SHASH_MD4); -} - -struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_md5(void) -{ - return ____crypto_shash_ctx_find(CRYPTO_SHASH_MD5); -} - static struct ksmbd_crypto_ctx *____crypto_aead_ctx_find(int id) { struct ksmbd_crypto_ctx *ctx; diff --git a/fs/ksmbd/crypto_ctx.h b/fs/ksmbd/crypto_ctx.h index ef11154b43df..4a367c62f653 100644 --- a/fs/ksmbd/crypto_ctx.h +++ b/fs/ksmbd/crypto_ctx.h @@ -15,8 +15,6 @@ enum { CRYPTO_SHASH_CMACAES, CRYPTO_SHASH_SHA256, CRYPTO_SHASH_SHA512, - CRYPTO_SHASH_MD4, - CRYPTO_SHASH_MD5, CRYPTO_SHASH_MAX, }; @@ -43,8 +41,6 @@ struct ksmbd_crypto_ctx { #define CRYPTO_CMACAES(c) ((c)->desc[CRYPTO_SHASH_CMACAES]) #define CRYPTO_SHA256(c) ((c)->desc[CRYPTO_SHASH_SHA256]) #define CRYPTO_SHA512(c) ((c)->desc[CRYPTO_SHASH_SHA512]) -#define CRYPTO_MD4(c) ((c)->desc[CRYPTO_SHASH_MD4]) -#define CRYPTO_MD5(c) ((c)->desc[CRYPTO_SHASH_MD5]) #define CRYPTO_HMACMD5_TFM(c) ((c)->desc[CRYPTO_SHASH_HMACMD5]->tfm) #define CRYPTO_HMACSHA256_TFM(c)\ @@ -52,8 +48,6 @@ struct ksmbd_crypto_ctx { #define CRYPTO_CMACAES_TFM(c) ((c)->desc[CRYPTO_SHASH_CMACAES]->tfm) #define CRYPTO_SHA256_TFM(c) ((c)->desc[CRYPTO_SHASH_SHA256]->tfm) #define CRYPTO_SHA512_TFM(c) ((c)->desc[CRYPTO_SHASH_SHA512]->tfm) -#define CRYPTO_MD4_TFM(c) ((c)->desc[CRYPTO_SHASH_MD4]->tfm) -#define CRYPTO_MD5_TFM(c) ((c)->desc[CRYPTO_SHASH_MD5]->tfm) #define CRYPTO_GCM(c) ((c)->ccmaes[CRYPTO_AEAD_AES_GCM]) #define CRYPTO_CCM(c) ((c)->ccmaes[CRYPTO_AEAD_AES_CCM]) @@ -64,8 +58,6 @@ struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_hmacsha256(void); struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_cmacaes(void); struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_sha512(void); struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_sha256(void); -struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_md4(void); -struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_md5(void); struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_gcm(void); struct ksmbd_crypto_ctx *ksmbd_crypto_ctx_find_ccm(void); void ksmbd_crypto_destroy(void); -- cgit From 41e76c6a3c83c85e849f10754b8632ea763d9be4 Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Mon, 20 Sep 2021 16:25:33 -0700 Subject: nbd: use shifts rather than multiplies commit fad7cd3310db ("nbd: add the check to prevent overflow in __nbd_ioctl()") raised an issue from the fallback helpers added in commit f0907827a8a9 ("compiler.h: enable builtin overflow checkers and add fallback code") ERROR: modpost: "__divdi3" [drivers/block/nbd.ko] undefined! As Stephen Rothwell notes: The added check_mul_overflow() call is being passed 64 bit values. COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW is not set for this build (see include/linux/overflow.h). Specifically, the helpers for checking whether the results of a multiplication overflowed (__unsigned_mul_overflow, __signed_add_overflow) use the division operator when !COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW. This is problematic for 64b operands on 32b hosts. This was fixed upstream by commit 76ae847497bc ("Documentation: raise minimum supported version of GCC to 5.1") which is not suitable to be backported to stable. Further, __builtin_mul_overflow() would emit a libcall to a compiler-rt-only symbol when compiling with clang < 14 for 32b targets. ld.lld: error: undefined symbol: __mulodi4 In order to keep stable buildable with GCC 4.9 and clang < 14, modify struct nbd_config to instead track the number of bits of the block size; reconstructing the block size using runtime checked shifts that are not problematic for those compilers and in a ways that can be backported to stable. In nbd_set_size, we do validate that the value of blksize must be a power of two (POT) and is in the range of [512, PAGE_SIZE] (both inclusive). This does modify the debugfs interface. Cc: stable@vger.kernel.org Cc: Arnd Bergmann Cc: Rasmus Villemoes Link: https://github.com/ClangBuiltLinux/linux/issues/1438 Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/ Link: https://lore.kernel.org/stable/CAHk-=whiQBofgis_rkniz8GBP9wZtSZdcDEffgSLO62BUGV3gg@mail.gmail.com/ Reported-by: Naresh Kamboju Reported-by: Nathan Chancellor Reported-by: Stephen Rothwell Suggested-by: Kees Cook Suggested-by: Linus Torvalds Suggested-by: Pavel Machek Signed-off-by: Nick Desaulniers Reviewed-by: Josef Bacik Link: https://lore.kernel.org/r/20210920232533.4092046-1-ndesaulniers@google.com Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 5170a630778d..1183f7872b71 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -97,13 +97,18 @@ struct nbd_config { atomic_t recv_threads; wait_queue_head_t recv_wq; - loff_t blksize; + unsigned int blksize_bits; loff_t bytesize; #if IS_ENABLED(CONFIG_DEBUG_FS) struct dentry *dbg_dir; #endif }; +static inline unsigned int nbd_blksize(struct nbd_config *config) +{ + return 1u << config->blksize_bits; +} + struct nbd_device { struct blk_mq_tag_set tag_set; @@ -146,7 +151,7 @@ static struct dentry *nbd_dbg_dir; #define NBD_MAGIC 0x68797548 -#define NBD_DEF_BLKSIZE 1024 +#define NBD_DEF_BLKSIZE_BITS 10 static unsigned int nbds_max = 16; static int max_part = 16; @@ -317,12 +322,12 @@ static int nbd_set_size(struct nbd_device *nbd, loff_t bytesize, loff_t blksize) { if (!blksize) - blksize = NBD_DEF_BLKSIZE; + blksize = 1u << NBD_DEF_BLKSIZE_BITS; if (blksize < 512 || blksize > PAGE_SIZE || !is_power_of_2(blksize)) return -EINVAL; nbd->config->bytesize = bytesize; - nbd->config->blksize = blksize; + nbd->config->blksize_bits = __ffs(blksize); if (!nbd->task_recv) return 0; @@ -1337,7 +1342,7 @@ static int nbd_start_device(struct nbd_device *nbd) args->index = i; queue_work(nbd->recv_workq, &args->work); } - return nbd_set_size(nbd, config->bytesize, config->blksize); + return nbd_set_size(nbd, config->bytesize, nbd_blksize(config)); } static int nbd_start_device_ioctl(struct nbd_device *nbd, struct block_device *bdev) @@ -1406,11 +1411,11 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, case NBD_SET_BLKSIZE: return nbd_set_size(nbd, config->bytesize, arg); case NBD_SET_SIZE: - return nbd_set_size(nbd, arg, config->blksize); + return nbd_set_size(nbd, arg, nbd_blksize(config)); case NBD_SET_SIZE_BLOCKS: - if (check_mul_overflow((loff_t)arg, config->blksize, &bytesize)) + if (check_shl_overflow(arg, config->blksize_bits, &bytesize)) return -EINVAL; - return nbd_set_size(nbd, bytesize, config->blksize); + return nbd_set_size(nbd, bytesize, nbd_blksize(config)); case NBD_SET_TIMEOUT: nbd_set_cmd_timeout(nbd, arg); return 0; @@ -1476,7 +1481,7 @@ static struct nbd_config *nbd_alloc_config(void) atomic_set(&config->recv_threads, 0); init_waitqueue_head(&config->recv_wq); init_waitqueue_head(&config->conn_wait); - config->blksize = NBD_DEF_BLKSIZE; + config->blksize_bits = NBD_DEF_BLKSIZE_BITS; atomic_set(&config->live_connections, 0); try_module_get(THIS_MODULE); return config; @@ -1604,7 +1609,7 @@ static int nbd_dev_dbg_init(struct nbd_device *nbd) debugfs_create_file("tasks", 0444, dir, nbd, &nbd_dbg_tasks_fops); debugfs_create_u64("size_bytes", 0444, dir, &config->bytesize); debugfs_create_u32("timeout", 0444, dir, &nbd->tag_set.timeout); - debugfs_create_u64("blocksize", 0444, dir, &config->blksize); + debugfs_create_u32("blocksize_bits", 0444, dir, &config->blksize_bits); debugfs_create_file("flags", 0444, dir, nbd, &nbd_dbg_flags_fops); return 0; @@ -1826,7 +1831,7 @@ nbd_device_policy[NBD_DEVICE_ATTR_MAX + 1] = { static int nbd_genl_size_set(struct genl_info *info, struct nbd_device *nbd) { struct nbd_config *config = nbd->config; - u64 bsize = config->blksize; + u64 bsize = nbd_blksize(config); u64 bytes = config->bytesize; if (info->attrs[NBD_ATTR_SIZE_BYTES]) @@ -1835,7 +1840,7 @@ static int nbd_genl_size_set(struct genl_info *info, struct nbd_device *nbd) if (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES]) bsize = nla_get_u64(info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES]); - if (bytes != config->bytesize || bsize != config->blksize) + if (bytes != config->bytesize || bsize != nbd_blksize(config)) return nbd_set_size(nbd, bytes, bsize); return 0; } -- cgit From 49054556289e8787501630b7c7a9d407da02e296 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 29 Sep 2021 11:59:17 +0200 Subject: net: introduce and use lock_sock_fast_nested() Syzkaller reported a false positive deadlock involving the nl socket lock and the subflow socket lock: MPTCP: kernel_bind error, err=-98 ============================================ WARNING: possible recursive locking detected 5.15.0-rc1-syzkaller #0 Not tainted -------------------------------------------- syz-executor998/6520 is trying to acquire lock: ffff8880795718a0 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 but task is already holding lock: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-sk_lock-AF_INET); lock(k-sk_lock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by syz-executor998/6520: #0: ffffffff8d176c50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 net/netlink/genetlink.c:802 #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_lock net/netlink/genetlink.c:33 [inline] #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x3e0/0x580 net/netlink/genetlink.c:790 #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 stack backtrace: CPU: 1 PID: 6520 Comm: syz-executor998 Not tainted 5.15.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2944 [inline] check_deadlock kernel/locking/lockdep.c:2987 [inline] validate_chain kernel/locking/lockdep.c:3776 [inline] __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5015 lock_acquire kernel/locking/lockdep.c:5625 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590 lock_sock_fast+0x36/0x100 net/core/sock.c:3229 mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 __sock_release net/socket.c:649 [inline] sock_release+0x87/0x1b0 net/socket.c:677 mptcp_pm_nl_create_listen_socket+0x238/0x2c0 net/mptcp/pm_netlink.c:900 mptcp_nl_cmd_add_addr+0x359/0x930 net/mptcp/pm_netlink.c:1170 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_no_sendpage+0x101/0x150 net/core/sock.c:2980 kernel_sendpage.part.0+0x1a0/0x340 net/socket.c:3504 kernel_sendpage net/socket.c:3501 [inline] sock_sendpage+0xe5/0x140 net/socket.c:1003 pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364 splice_from_pipe_feed fs/splice.c:418 [inline] __splice_from_pipe+0x43e/0x8a0 fs/splice.c:562 splice_from_pipe fs/splice.c:597 [inline] generic_splice_sendpage+0xd4/0x140 fs/splice.c:746 do_splice_from fs/splice.c:767 [inline] direct_splice_actor+0x110/0x180 fs/splice.c:936 splice_direct_to_actor+0x34b/0x8c0 fs/splice.c:891 do_splice_direct+0x1b3/0x280 fs/splice.c:979 do_sendfile+0xae9/0x1240 fs/read_write.c:1249 __do_sys_sendfile64 fs/read_write.c:1314 [inline] __se_sys_sendfile64 fs/read_write.c:1300 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1300 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f215cb69969 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc96bb3868 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 00007f215cbad072 RCX: 00007f215cb69969 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005 RBP: 0000000000000000 R08: 00007ffc96bb3a08 R09: 00007ffc96bb3a08 R10: 0000000100000002 R11: 0000000000000246 R12: 00007ffc96bb387c R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000 the problem originates from uncorrect lock annotation in the mptcp code and is only visible since commit 2dcb96bacce3 ("net: core: Correct the sock::sk_lock.owned lockdep annotations"), but is present since the port-based endpoint support initial implementation. This patch addresses the issue introducing a nested variant of lock_sock_fast() and using it in the relevant code path. Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port") Fixes: 2dcb96bacce3 ("net: core: Correct the sock::sk_lock.owned lockdep annotations") Suggested-by: Thomas Gleixner Reported-and-tested-by: syzbot+1dd53f7a89b299d59eaf@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni Reviewed-by: Thomas Gleixner Signed-off-by: David S. Miller --- include/net/sock.h | 31 ++++++++++++++++++++++++++++++- net/core/sock.c | 20 ++------------------ net/mptcp/protocol.c | 2 +- 3 files changed, 33 insertions(+), 20 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index c005c3c750e8..dc3f8169312e 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1623,7 +1623,36 @@ void release_sock(struct sock *sk); SINGLE_DEPTH_NESTING) #define bh_unlock_sock(__sk) spin_unlock(&((__sk)->sk_lock.slock)) -bool lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock); +bool __lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock); + +/** + * lock_sock_fast - fast version of lock_sock + * @sk: socket + * + * This version should be used for very small section, where process wont block + * return false if fast path is taken: + * + * sk_lock.slock locked, owned = 0, BH disabled + * + * return true if slow path is taken: + * + * sk_lock.slock unlocked, owned = 1, BH enabled + */ +static inline bool lock_sock_fast(struct sock *sk) +{ + /* The sk_lock has mutex_lock() semantics here. */ + mutex_acquire(&sk->sk_lock.dep_map, 0, 0, _RET_IP_); + + return __lock_sock_fast(sk); +} + +/* fast socket lock variant for caller already holding a [different] socket lock */ +static inline bool lock_sock_fast_nested(struct sock *sk) +{ + mutex_acquire(&sk->sk_lock.dep_map, SINGLE_DEPTH_NESTING, 0, _RET_IP_); + + return __lock_sock_fast(sk); +} /** * unlock_sock_fast - complement of lock_sock_fast diff --git a/net/core/sock.c b/net/core/sock.c index 512e629f9780..7060d183216e 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -3210,24 +3210,8 @@ void release_sock(struct sock *sk) } EXPORT_SYMBOL(release_sock); -/** - * lock_sock_fast - fast version of lock_sock - * @sk: socket - * - * This version should be used for very small section, where process wont block - * return false if fast path is taken: - * - * sk_lock.slock locked, owned = 0, BH disabled - * - * return true if slow path is taken: - * - * sk_lock.slock unlocked, owned = 1, BH enabled - */ -bool lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock) +bool __lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock) { - /* The sk_lock has mutex_lock() semantics here. */ - mutex_acquire(&sk->sk_lock.dep_map, 0, 0, _RET_IP_); - might_sleep(); spin_lock_bh(&sk->sk_lock.slock); @@ -3256,7 +3240,7 @@ bool lock_sock_fast(struct sock *sk) __acquires(&sk->sk_lock.slock) spin_unlock_bh(&sk->sk_lock.slock); return true; } -EXPORT_SYMBOL(lock_sock_fast); +EXPORT_SYMBOL(__lock_sock_fast); int sock_gettstamp(struct socket *sock, void __user *userstamp, bool timeval, bool time32) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index dbcebf56798f..e5df0b5971c8 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -2735,7 +2735,7 @@ cleanup: inet_csk(sk)->icsk_mtup.probe_timestamp = tcp_jiffies32; mptcp_for_each_subflow(mptcp_sk(sk), subflow) { struct sock *ssk = mptcp_subflow_tcp_sock(subflow); - bool slow = lock_sock_fast(ssk); + bool slow = lock_sock_fast_nested(ssk); sock_orphan(ssk); unlock_sock_fast(ssk, slow); -- cgit From d5ef190693a7d76c5c192d108e8dec48307b46ee Mon Sep 17 00:00:00 2001 From: Vlad Buslov Date: Wed, 29 Sep 2021 18:08:49 +0300 Subject: net: sched: flower: protect fl_walk() with rcu Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul() also removed rcu protection of individual filters which causes following use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain rcu read lock while iterating and taking the filter reference and temporary release the lock while calling arg->fn() callback that can sleep. KASAN trace: [ 352.773640] ================================================================== [ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower] [ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987 [ 352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2 [ 352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 352.781022] Call Trace: [ 352.781573] dump_stack_lvl+0x46/0x5a [ 352.782332] print_address_description.constprop.0+0x1f/0x140 [ 352.783400] ? fl_walk+0x159/0x240 [cls_flower] [ 352.784292] ? fl_walk+0x159/0x240 [cls_flower] [ 352.785138] kasan_report.cold+0x83/0xdf [ 352.785851] ? fl_walk+0x159/0x240 [cls_flower] [ 352.786587] kasan_check_range+0x145/0x1a0 [ 352.787337] fl_walk+0x159/0x240 [cls_flower] [ 352.788163] ? fl_put+0x10/0x10 [cls_flower] [ 352.789007] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.790102] tcf_chain_dump+0x231/0x450 [ 352.790878] ? tcf_chain_tp_delete_empty+0x170/0x170 [ 352.791833] ? __might_sleep+0x2e/0xc0 [ 352.792594] ? tfilter_notify+0x170/0x170 [ 352.793400] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.794477] tc_dump_tfilter+0x385/0x4b0 [ 352.795262] ? tc_new_tfilter+0x1180/0x1180 [ 352.796103] ? __mod_node_page_state+0x1f/0xc0 [ 352.796974] ? __build_skb_around+0x10e/0x130 [ 352.797826] netlink_dump+0x2c0/0x560 [ 352.798563] ? netlink_getsockopt+0x430/0x430 [ 352.799433] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.800542] __netlink_dump_start+0x356/0x440 [ 352.801397] rtnetlink_rcv_msg+0x3ff/0x550 [ 352.802190] ? tc_new_tfilter+0x1180/0x1180 [ 352.802872] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.803668] ? tc_new_tfilter+0x1180/0x1180 [ 352.804344] ? _copy_from_iter_nocache+0x800/0x800 [ 352.805202] ? kasan_set_track+0x1c/0x30 [ 352.805900] netlink_rcv_skb+0xc6/0x1f0 [ 352.806587] ? rht_deferred_worker+0x6b0/0x6b0 [ 352.807455] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.808324] ? netlink_ack+0x4d0/0x4d0 [ 352.809086] ? netlink_deliver_tap+0x62/0x3d0 [ 352.809951] netlink_unicast+0x353/0x480 [ 352.810744] ? netlink_attachskb+0x430/0x430 [ 352.811586] ? __alloc_skb+0xd7/0x200 [ 352.812349] netlink_sendmsg+0x396/0x680 [ 352.813132] ? netlink_unicast+0x480/0x480 [ 352.813952] ? __import_iovec+0x192/0x210 [ 352.814759] ? netlink_unicast+0x480/0x480 [ 352.815580] sock_sendmsg+0x6c/0x80 [ 352.816299] ____sys_sendmsg+0x3a5/0x3c0 [ 352.817096] ? kernel_sendmsg+0x30/0x30 [ 352.817873] ? __ia32_sys_recvmmsg+0x150/0x150 [ 352.818753] ___sys_sendmsg+0xd8/0x140 [ 352.819518] ? sendmsg_copy_msghdr+0x110/0x110 [ 352.820402] ? ___sys_recvmsg+0xf4/0x1a0 [ 352.821110] ? __copy_msghdr_from_user+0x260/0x260 [ 352.821934] ? _raw_spin_lock+0x81/0xd0 [ 352.822680] ? __handle_mm_fault+0xef3/0x1b20 [ 352.823549] ? rb_insert_color+0x2a/0x270 [ 352.824373] ? copy_page_range+0x16b0/0x16b0 [ 352.825209] ? perf_event_update_userpage+0x2d0/0x2d0 [ 352.826190] ? __fget_light+0xd9/0xf0 [ 352.826941] __sys_sendmsg+0xb3/0x130 [ 352.827613] ? __sys_sendmsg_sock+0x20/0x20 [ 352.828377] ? do_user_addr_fault+0x2c5/0x8a0 [ 352.829184] ? fpregs_assert_state_consistent+0x52/0x60 [ 352.830001] ? exit_to_user_mode_prepare+0x32/0x160 [ 352.830845] do_syscall_64+0x35/0x80 [ 352.831445] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.832331] RIP: 0033:0x7f7bee973c17 [ 352.833078] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 352.836202] RSP: 002b:00007ffcbb368e28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 352.837524] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7bee973c17 [ 352.838715] RDX: 0000000000000000 RSI: 00007ffcbb368e50 RDI: 0000000000000003 [ 352.839838] RBP: 00007ffcbb36d090 R08: 00000000cea96d79 R09: 00007f7beea34a40 [ 352.841021] R10: 00000000004059bb R11: 0000000000000246 R12: 000000000046563f [ 352.842208] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcbb36d088 [ 352.843784] Allocated by task 2960: [ 352.844451] kasan_save_stack+0x1b/0x40 [ 352.845173] __kasan_kmalloc+0x7c/0x90 [ 352.845873] fl_change+0x282/0x22db [cls_flower] [ 352.846696] tc_new_tfilter+0x6cf/0x1180 [ 352.847493] rtnetlink_rcv_msg+0x471/0x550 [ 352.848323] netlink_rcv_skb+0xc6/0x1f0 [ 352.849097] netlink_unicast+0x353/0x480 [ 352.849886] netlink_sendmsg+0x396/0x680 [ 352.850678] sock_sendmsg+0x6c/0x80 [ 352.851398] ____sys_sendmsg+0x3a5/0x3c0 [ 352.852202] ___sys_sendmsg+0xd8/0x140 [ 352.852967] __sys_sendmsg+0xb3/0x130 [ 352.853718] do_syscall_64+0x35/0x80 [ 352.854457] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.855830] Freed by task 7: [ 352.856421] kasan_save_stack+0x1b/0x40 [ 352.857139] kasan_set_track+0x1c/0x30 [ 352.857854] kasan_set_free_info+0x20/0x30 [ 352.858609] __kasan_slab_free+0xed/0x130 [ 352.859348] kfree+0xa7/0x3c0 [ 352.859951] process_one_work+0x44d/0x780 [ 352.860685] worker_thread+0x2e2/0x7e0 [ 352.861390] kthread+0x1f4/0x220 [ 352.862022] ret_from_fork+0x1f/0x30 [ 352.862955] Last potentially related work creation: [ 352.863758] kasan_save_stack+0x1b/0x40 [ 352.864378] kasan_record_aux_stack+0xab/0xc0 [ 352.865028] insert_work+0x30/0x160 [ 352.865617] __queue_work+0x351/0x670 [ 352.866261] rcu_work_rcufn+0x30/0x40 [ 352.866917] rcu_core+0x3b2/0xdb0 [ 352.867561] __do_softirq+0xf6/0x386 [ 352.868708] Second to last potentially related work creation: [ 352.869779] kasan_save_stack+0x1b/0x40 [ 352.870560] kasan_record_aux_stack+0xab/0xc0 [ 352.871426] call_rcu+0x5f/0x5c0 [ 352.872108] queue_rcu_work+0x44/0x50 [ 352.872855] __fl_put+0x17c/0x240 [cls_flower] [ 352.873733] fl_delete+0xc7/0x100 [cls_flower] [ 352.874607] tc_del_tfilter+0x510/0xb30 [ 352.886085] rtnetlink_rcv_msg+0x471/0x550 [ 352.886875] netlink_rcv_skb+0xc6/0x1f0 [ 352.887636] netlink_unicast+0x353/0x480 [ 352.888285] netlink_sendmsg+0x396/0x680 [ 352.888942] sock_sendmsg+0x6c/0x80 [ 352.889583] ____sys_sendmsg+0x3a5/0x3c0 [ 352.890311] ___sys_sendmsg+0xd8/0x140 [ 352.891019] __sys_sendmsg+0xb3/0x130 [ 352.891716] do_syscall_64+0x35/0x80 [ 352.892395] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.893666] The buggy address belongs to the object at ffff8881c8251000 which belongs to the cache kmalloc-2k of size 2048 [ 352.895696] The buggy address is located 1152 bytes inside of 2048-byte region [ffff8881c8251000, ffff8881c8251800) [ 352.897640] The buggy address belongs to the page: [ 352.898492] page:00000000213bac35 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c8250 [ 352.900110] head:00000000213bac35 order:3 compound_mapcount:0 compound_pincount:0 [ 352.901541] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [ 352.902908] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042f00 [ 352.904391] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 352.905861] page dumped because: kasan: bad access detected [ 352.907323] Memory state around the buggy address: [ 352.908218] ffff8881c8251380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.909471] ffff8881c8251400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.910735] >ffff8881c8251480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.912012] ^ [ 352.912642] ffff8881c8251500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.913919] ffff8881c8251580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.915185] ================================================================== Fixes: d39d714969cd ("idr: introduce idr_for_each_entry_continue_ul()") Signed-off-by: Vlad Buslov Acked-by: Cong Wang Signed-off-by: David S. Miller --- net/sched/cls_flower.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/sched/cls_flower.c b/net/sched/cls_flower.c index 23b21253b3c3..eb6345a027e1 100644 --- a/net/sched/cls_flower.c +++ b/net/sched/cls_flower.c @@ -2188,18 +2188,24 @@ static void fl_walk(struct tcf_proto *tp, struct tcf_walker *arg, arg->count = arg->skip; + rcu_read_lock(); idr_for_each_entry_continue_ul(&head->handle_idr, f, tmp, id) { /* don't return filters that are being deleted */ if (!refcount_inc_not_zero(&f->refcnt)) continue; + rcu_read_unlock(); + if (arg->fn(tp, f, arg) < 0) { __fl_put(f); arg->stop = 1; + rcu_read_lock(); break; } __fl_put(f); arg->count++; + rcu_read_lock(); } + rcu_read_unlock(); arg->cookie = id; } -- cgit From a5b8fd657881003ea11c193d147c8f4ba143725d Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 29 Sep 2021 08:32:24 -0700 Subject: net: dev_addr_list: handle first address in __hw_addr_add_ex struct dev_addr_list is used for device addresses, unicast addresses and multicast addresses. The first of those needs special handling of the main address - netdev->dev_addr points directly the data of the entry and drivers write to it freely, so we can't maintain it in the rbtree (for now, at least, to be fixed in net-next). Current work around sprinkles special handling of the first address on the list throughout the code but it missed the case where address is being added. First address will not be visible during subsequent adds. Syzbot found a warning where unicast addresses are modified without holding the rtnl lock, tl;dr is that team generates the same modification multiple times, not necessarily when right locks are held. In the repro we have: macvlan -> team -> veth macvlan adds a unicast address to the team. Team then pushes that address down to its memebers (veths). Next something unrelated makes team sync member addrs again, and because of the bug the addr entries get duplicated in the veths. macvlan gets removed, removes its addr from team which removes only one of the duplicated addresses from veths. This removal is done under rtnl. Next syzbot uses iptables to add a multicast addr to team (which does not hold rtnl lock). Team syncs veth addrs, but because veths' unicast list still has the duplicate it will also get sync, even though this update is intended for mc addresses. Again, uc address updates need rtnl lock, boom. Reported-by: syzbot+7a2ab2cdc14d134de553@syzkaller.appspotmail.com Fixes: 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs with IPv6 addresses, performance of changing link state, attaching a VRF, changing an IPv6 address, etc. go down dramtically.") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- net/core/dev_addr_lists.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 8c39283c26ae..f0cb38344126 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -50,6 +50,11 @@ static int __hw_addr_add_ex(struct netdev_hw_addr_list *list, if (addr_len > MAX_ADDR_LEN) return -EINVAL; + ha = list_first_entry(&list->list, struct netdev_hw_addr, list); + if (ha && !memcmp(addr, ha->addr, addr_len) && + (!addr_type || addr_type == ha->type)) + goto found_it; + while (*ins_point) { int diff; @@ -64,6 +69,7 @@ static int __hw_addr_add_ex(struct netdev_hw_addr_list *list, } else if (diff > 0) { ins_point = &parent->rb_right; } else { +found_it: if (exclusive) return -EEXIST; if (global) { -- cgit From 656ed8b015f19bf3f6e6b3ddd9a4bb4aa5ca73e1 Mon Sep 17 00:00:00 2001 From: Wong Vee Khee Date: Thu, 30 Sep 2021 14:44:36 +0800 Subject: net: stmmac: fix EEE init issue when paired with EEE capable PHYs When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY, and the PHY is advertising EEE by default, we need to enable EEE on the xPCS side too, instead of having user to manually trigger the enabling config via ethtool. Fixed this by adding xpcs_config_eee() call in stmmac_eee_init(). Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet") Cc: Michael Sit Wei Hong Signed-off-by: Wong Vee Khee Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 553c4403258a..981ccf47dcea 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -486,6 +486,10 @@ bool stmmac_eee_init(struct stmmac_priv *priv) timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0); stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS, eee_tw_timer); + if (priv->hw->xpcs) + xpcs_config_eee(priv->hw->xpcs, + priv->plat->mult_fact_100ns, + true); } if (priv->plat->has_gmac4 && priv->tx_lpi_timer <= STMMAC_ET_MAX) { -- cgit From 35306eb23814444bd4021f8a1c3047d3cb0c8b2b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 29 Sep 2021 15:57:50 -0700 Subject: af_unix: fix races in sk_peer_pid and sk_peer_cred accesses Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred. In order to fix this issue, this patch adds a new spinlock that needs to be used whenever these fields are read or written. Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently reading sk->sk_peer_pid which makes no sense, as this field is only possibly set by AF_UNIX sockets. We will have to clean this in a separate patch. This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback" or implementing what was truly expected. Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.") Signed-off-by: Eric Dumazet Reported-by: Jann Horn Cc: Eric W. Biederman Cc: Luiz Augusto von Dentz Cc: Marcel Holtmann Signed-off-by: David S. Miller --- include/net/sock.h | 2 ++ net/core/sock.c | 32 ++++++++++++++++++++++++++------ net/unix/af_unix.c | 34 ++++++++++++++++++++++++++++------ 3 files changed, 56 insertions(+), 12 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index dc3f8169312e..ae929e21a376 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -488,8 +488,10 @@ struct sock { u8 sk_prefer_busy_poll; u16 sk_busy_poll_budget; #endif + spinlock_t sk_peer_lock; struct pid *sk_peer_pid; const struct cred *sk_peer_cred; + long sk_rcvtimeo; ktime_t sk_stamp; #if BITS_PER_LONG==32 diff --git a/net/core/sock.c b/net/core/sock.c index 7060d183216e..c1601f75ec4b 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1376,6 +1376,16 @@ set_sndbuf: } EXPORT_SYMBOL(sock_setsockopt); +static const struct cred *sk_get_peer_cred(struct sock *sk) +{ + const struct cred *cred; + + spin_lock(&sk->sk_peer_lock); + cred = get_cred(sk->sk_peer_cred); + spin_unlock(&sk->sk_peer_lock); + + return cred; +} static void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred) @@ -1552,7 +1562,11 @@ int sock_getsockopt(struct socket *sock, int level, int optname, struct ucred peercred; if (len > sizeof(peercred)) len = sizeof(peercred); + + spin_lock(&sk->sk_peer_lock); cred_to_ucred(sk->sk_peer_pid, sk->sk_peer_cred, &peercred); + spin_unlock(&sk->sk_peer_lock); + if (copy_to_user(optval, &peercred, len)) return -EFAULT; goto lenout; @@ -1560,20 +1574,23 @@ int sock_getsockopt(struct socket *sock, int level, int optname, case SO_PEERGROUPS: { + const struct cred *cred; int ret, n; - if (!sk->sk_peer_cred) + cred = sk_get_peer_cred(sk); + if (!cred) return -ENODATA; - n = sk->sk_peer_cred->group_info->ngroups; + n = cred->group_info->ngroups; if (len < n * sizeof(gid_t)) { len = n * sizeof(gid_t); + put_cred(cred); return put_user(len, optlen) ? -EFAULT : -ERANGE; } len = n * sizeof(gid_t); - ret = groups_to_user((gid_t __user *)optval, - sk->sk_peer_cred->group_info); + ret = groups_to_user((gid_t __user *)optval, cred->group_info); + put_cred(cred); if (ret) return ret; goto lenout; @@ -1935,9 +1952,10 @@ static void __sk_destruct(struct rcu_head *head) sk->sk_frag.page = NULL; } - if (sk->sk_peer_cred) - put_cred(sk->sk_peer_cred); + /* We do not need to acquire sk->sk_peer_lock, we are the last user. */ + put_cred(sk->sk_peer_cred); put_pid(sk->sk_peer_pid); + if (likely(sk->sk_net_refcnt)) put_net(sock_net(sk)); sk_prot_free(sk->sk_prot_creator, sk); @@ -3145,6 +3163,8 @@ void sock_init_data(struct socket *sock, struct sock *sk) sk->sk_peer_pid = NULL; sk->sk_peer_cred = NULL; + spin_lock_init(&sk->sk_peer_lock); + sk->sk_write_pending = 0; sk->sk_rcvlowat = 1; sk->sk_rcvtimeo = MAX_SCHEDULE_TIMEOUT; diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index f505b89bda6a..efac5989edb5 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -608,20 +608,42 @@ static void unix_release_sock(struct sock *sk, int embrion) static void init_peercred(struct sock *sk) { - put_pid(sk->sk_peer_pid); - if (sk->sk_peer_cred) - put_cred(sk->sk_peer_cred); + const struct cred *old_cred; + struct pid *old_pid; + + spin_lock(&sk->sk_peer_lock); + old_pid = sk->sk_peer_pid; + old_cred = sk->sk_peer_cred; sk->sk_peer_pid = get_pid(task_tgid(current)); sk->sk_peer_cred = get_current_cred(); + spin_unlock(&sk->sk_peer_lock); + + put_pid(old_pid); + put_cred(old_cred); } static void copy_peercred(struct sock *sk, struct sock *peersk) { - put_pid(sk->sk_peer_pid); - if (sk->sk_peer_cred) - put_cred(sk->sk_peer_cred); + const struct cred *old_cred; + struct pid *old_pid; + + if (sk < peersk) { + spin_lock(&sk->sk_peer_lock); + spin_lock_nested(&peersk->sk_peer_lock, SINGLE_DEPTH_NESTING); + } else { + spin_lock(&peersk->sk_peer_lock); + spin_lock_nested(&sk->sk_peer_lock, SINGLE_DEPTH_NESTING); + } + old_pid = sk->sk_peer_pid; + old_cred = sk->sk_peer_cred; sk->sk_peer_pid = get_pid(peersk->sk_peer_pid); sk->sk_peer_cred = get_cred(peersk->sk_peer_cred); + + spin_unlock(&sk->sk_peer_lock); + spin_unlock(&peersk->sk_peer_lock); + + put_pid(old_pid); + put_cred(old_cred); } static int unix_listen(struct socket *sock, int backlog) -- cgit From 88d300522cbb2827b679359e98cbadfb46e8226c Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 29 Sep 2021 15:37:18 +0900 Subject: ksmbd: use correct basic info level in set_file_basic_info() Use correct basic info level in set/get_file_basic_info(). Reviewed-by: Ralph Boehme Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 13 ++++++------- fs/ksmbd/smb2pdu.h | 9 +++++++++ 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index cea376b2dd8f..ce10873cfded 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -4161,7 +4161,7 @@ static void get_file_access_info(struct smb2_query_info_rsp *rsp, static int get_file_basic_info(struct smb2_query_info_rsp *rsp, struct ksmbd_file *fp, void *rsp_org) { - struct smb2_file_all_info *basic_info; + struct smb2_file_basic_info *basic_info; struct kstat stat; u64 time; @@ -4171,7 +4171,7 @@ static int get_file_basic_info(struct smb2_query_info_rsp *rsp, return -EACCES; } - basic_info = (struct smb2_file_all_info *)rsp->Buffer; + basic_info = (struct smb2_file_basic_info *)rsp->Buffer; generic_fillattr(file_mnt_user_ns(fp->filp), file_inode(fp->filp), &stat); basic_info->CreationTime = cpu_to_le64(fp->create_time); @@ -4184,9 +4184,8 @@ static int get_file_basic_info(struct smb2_query_info_rsp *rsp, basic_info->Attributes = fp->f_ci->m_fattr; basic_info->Pad1 = 0; rsp->OutputBufferLength = - cpu_to_le32(offsetof(struct smb2_file_all_info, AllocationSize)); - inc_rfc1001_len(rsp_org, offsetof(struct smb2_file_all_info, - AllocationSize)); + cpu_to_le32(sizeof(struct smb2_file_basic_info)); + inc_rfc1001_len(rsp_org, sizeof(struct smb2_file_basic_info)); return 0; } @@ -5412,7 +5411,7 @@ out: static int set_file_basic_info(struct ksmbd_file *fp, char *buf, struct ksmbd_share_config *share) { - struct smb2_file_all_info *file_info; + struct smb2_file_basic_info *file_info; struct iattr attrs; struct timespec64 ctime; struct file *filp; @@ -5423,7 +5422,7 @@ static int set_file_basic_info(struct ksmbd_file *fp, char *buf, if (!(fp->daccess & FILE_WRITE_ATTRIBUTES_LE)) return -EACCES; - file_info = (struct smb2_file_all_info *)buf; + file_info = (struct smb2_file_basic_info *)buf; attrs.ia_valid = 0; filp = fp->filp; inode = file_inode(filp); diff --git a/fs/ksmbd/smb2pdu.h b/fs/ksmbd/smb2pdu.h index bcec845b03f3..261825d06391 100644 --- a/fs/ksmbd/smb2pdu.h +++ b/fs/ksmbd/smb2pdu.h @@ -1464,6 +1464,15 @@ struct smb2_file_all_info { /* data block encoding of response to level 18 */ char FileName[1]; } __packed; /* level 18 Query */ +struct smb2_file_basic_info { /* data block encoding of response to level 18 */ + __le64 CreationTime; /* Beginning of FILE_BASIC_INFO equivalent */ + __le64 LastAccessTime; + __le64 LastWriteTime; + __le64 ChangeTime; + __le32 Attributes; + __u32 Pad1; /* End of FILE_BASIC_INFO_INFO equivalent */ +} __packed; + struct smb2_file_alt_name_info { __le32 FileNameLength; char FileName[0]; -- cgit From 9496e268e3af78a92778bf635488a8ec2dca8996 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 29 Sep 2021 15:41:48 +0900 Subject: ksmbd: add request buffer validation in smb2_set_info MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add buffer validation in smb2_set_info, and remove unused variable in set_file_basic_info. and smb2_set_info infolevel functions take structure pointer argument. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Sergey Senozhatsky Acked-by: Hyunchul Lee Reviewed-by: Ralph Boehme Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 149 ++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 107 insertions(+), 42 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index ce10873cfded..0d915554f532 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -2102,16 +2102,22 @@ out: * smb2_set_ea() - handler for setting extended attributes using set * info command * @eabuf: set info command buffer + * @buf_len: set info command buffer length * @path: dentry path for get ea * * Return: 0 on success, otherwise error */ -static int smb2_set_ea(struct smb2_ea_info *eabuf, struct path *path) +static int smb2_set_ea(struct smb2_ea_info *eabuf, unsigned int buf_len, + struct path *path) { struct user_namespace *user_ns = mnt_user_ns(path->mnt); char *attr_name = NULL, *value; int rc = 0; - int next = 0; + unsigned int next = 0; + + if (buf_len < sizeof(struct smb2_ea_info) + eabuf->EaNameLength + + le16_to_cpu(eabuf->EaValueLength)) + return -EINVAL; attr_name = kmalloc(XATTR_NAME_MAX + 1, GFP_KERNEL); if (!attr_name) @@ -2176,7 +2182,13 @@ static int smb2_set_ea(struct smb2_ea_info *eabuf, struct path *path) next: next = le32_to_cpu(eabuf->NextEntryOffset); + if (next == 0 || buf_len < next) + break; + buf_len -= next; eabuf = (struct smb2_ea_info *)((char *)eabuf + next); + if (next < (u32)eabuf->EaNameLength + le16_to_cpu(eabuf->EaValueLength)) + break; + } while (next != 0); kfree(attr_name); @@ -2757,7 +2769,15 @@ int smb2_open(struct ksmbd_work *work) created = true; user_ns = mnt_user_ns(path.mnt); if (ea_buf) { - rc = smb2_set_ea(&ea_buf->ea, &path); + if (le32_to_cpu(ea_buf->ccontext.DataLength) < + sizeof(struct smb2_ea_info)) { + rc = -EINVAL; + goto err_out; + } + + rc = smb2_set_ea(&ea_buf->ea, + le32_to_cpu(ea_buf->ccontext.DataLength), + &path); if (rc == -EOPNOTSUPP) rc = 0; else if (rc) @@ -5341,7 +5361,7 @@ out: static int smb2_create_link(struct ksmbd_work *work, struct ksmbd_share_config *share, struct smb2_file_link_info *file_info, - struct file *filp, + unsigned int buf_len, struct file *filp, struct nls_table *local_nls) { char *link_name = NULL, *target_name = NULL, *pathname = NULL; @@ -5349,6 +5369,10 @@ static int smb2_create_link(struct ksmbd_work *work, bool file_present = true; int rc; + if (buf_len < (u64)sizeof(struct smb2_file_link_info) + + le32_to_cpu(file_info->FileNameLength)) + return -EINVAL; + ksmbd_debug(SMB, "setting FILE_LINK_INFORMATION\n"); pathname = kmalloc(PATH_MAX, GFP_KERNEL); if (!pathname) @@ -5408,10 +5432,10 @@ out: return rc; } -static int set_file_basic_info(struct ksmbd_file *fp, char *buf, +static int set_file_basic_info(struct ksmbd_file *fp, + struct smb2_file_basic_info *file_info, struct ksmbd_share_config *share) { - struct smb2_file_basic_info *file_info; struct iattr attrs; struct timespec64 ctime; struct file *filp; @@ -5422,7 +5446,6 @@ static int set_file_basic_info(struct ksmbd_file *fp, char *buf, if (!(fp->daccess & FILE_WRITE_ATTRIBUTES_LE)) return -EACCES; - file_info = (struct smb2_file_basic_info *)buf; attrs.ia_valid = 0; filp = fp->filp; inode = file_inode(filp); @@ -5499,7 +5522,8 @@ static int set_file_basic_info(struct ksmbd_file *fp, char *buf, } static int set_file_allocation_info(struct ksmbd_work *work, - struct ksmbd_file *fp, char *buf) + struct ksmbd_file *fp, + struct smb2_file_alloc_info *file_alloc_info) { /* * TODO : It's working fine only when store dos attributes @@ -5507,7 +5531,6 @@ static int set_file_allocation_info(struct ksmbd_work *work, * properly with any smb.conf option */ - struct smb2_file_alloc_info *file_alloc_info; loff_t alloc_blks; struct inode *inode; int rc; @@ -5515,7 +5538,6 @@ static int set_file_allocation_info(struct ksmbd_work *work, if (!(fp->daccess & FILE_WRITE_DATA_LE)) return -EACCES; - file_alloc_info = (struct smb2_file_alloc_info *)buf; alloc_blks = (le64_to_cpu(file_alloc_info->AllocationSize) + 511) >> 9; inode = file_inode(fp->filp); @@ -5551,9 +5573,8 @@ static int set_file_allocation_info(struct ksmbd_work *work, } static int set_end_of_file_info(struct ksmbd_work *work, struct ksmbd_file *fp, - char *buf) + struct smb2_file_eof_info *file_eof_info) { - struct smb2_file_eof_info *file_eof_info; loff_t newsize; struct inode *inode; int rc; @@ -5561,7 +5582,6 @@ static int set_end_of_file_info(struct ksmbd_work *work, struct ksmbd_file *fp, if (!(fp->daccess & FILE_WRITE_DATA_LE)) return -EACCES; - file_eof_info = (struct smb2_file_eof_info *)buf; newsize = le64_to_cpu(file_eof_info->EndOfFile); inode = file_inode(fp->filp); @@ -5588,7 +5608,8 @@ static int set_end_of_file_info(struct ksmbd_work *work, struct ksmbd_file *fp, } static int set_rename_info(struct ksmbd_work *work, struct ksmbd_file *fp, - char *buf) + struct smb2_file_rename_info *rename_info, + unsigned int buf_len) { struct user_namespace *user_ns; struct ksmbd_file *parent_fp; @@ -5601,6 +5622,10 @@ static int set_rename_info(struct ksmbd_work *work, struct ksmbd_file *fp, return -EACCES; } + if (buf_len < (u64)sizeof(struct smb2_file_rename_info) + + le32_to_cpu(rename_info->FileNameLength)) + return -EINVAL; + user_ns = file_mnt_user_ns(fp->filp); if (ksmbd_stream_fd(fp)) goto next; @@ -5623,14 +5648,13 @@ static int set_rename_info(struct ksmbd_work *work, struct ksmbd_file *fp, } } next: - return smb2_rename(work, fp, user_ns, - (struct smb2_file_rename_info *)buf, + return smb2_rename(work, fp, user_ns, rename_info, work->sess->conn->local_nls); } -static int set_file_disposition_info(struct ksmbd_file *fp, char *buf) +static int set_file_disposition_info(struct ksmbd_file *fp, + struct smb2_file_disposition_info *file_info) { - struct smb2_file_disposition_info *file_info; struct inode *inode; if (!(fp->daccess & FILE_DELETE_LE)) { @@ -5639,7 +5663,6 @@ static int set_file_disposition_info(struct ksmbd_file *fp, char *buf) } inode = file_inode(fp->filp); - file_info = (struct smb2_file_disposition_info *)buf; if (file_info->DeletePending) { if (S_ISDIR(inode->i_mode) && ksmbd_vfs_empty_dir(fp) == -ENOTEMPTY) @@ -5651,15 +5674,14 @@ static int set_file_disposition_info(struct ksmbd_file *fp, char *buf) return 0; } -static int set_file_position_info(struct ksmbd_file *fp, char *buf) +static int set_file_position_info(struct ksmbd_file *fp, + struct smb2_file_pos_info *file_info) { - struct smb2_file_pos_info *file_info; loff_t current_byte_offset; unsigned long sector_size; struct inode *inode; inode = file_inode(fp->filp); - file_info = (struct smb2_file_pos_info *)buf; current_byte_offset = le64_to_cpu(file_info->CurrentByteOffset); sector_size = inode->i_sb->s_blocksize; @@ -5675,12 +5697,11 @@ static int set_file_position_info(struct ksmbd_file *fp, char *buf) return 0; } -static int set_file_mode_info(struct ksmbd_file *fp, char *buf) +static int set_file_mode_info(struct ksmbd_file *fp, + struct smb2_file_mode_info *file_info) { - struct smb2_file_mode_info *file_info; __le32 mode; - file_info = (struct smb2_file_mode_info *)buf; mode = file_info->Mode; if ((mode & ~FILE_MODE_INFO_MASK) || @@ -5710,40 +5731,74 @@ static int set_file_mode_info(struct ksmbd_file *fp, char *buf) * TODO: need to implement an error handling for STATUS_INFO_LENGTH_MISMATCH */ static int smb2_set_info_file(struct ksmbd_work *work, struct ksmbd_file *fp, - int info_class, char *buf, + struct smb2_set_info_req *req, struct ksmbd_share_config *share) { - switch (info_class) { + unsigned int buf_len = le32_to_cpu(req->BufferLength); + + switch (req->FileInfoClass) { case FILE_BASIC_INFORMATION: - return set_file_basic_info(fp, buf, share); + { + if (buf_len < sizeof(struct smb2_file_basic_info)) + return -EINVAL; + return set_file_basic_info(fp, (struct smb2_file_basic_info *)req->Buffer, share); + } case FILE_ALLOCATION_INFORMATION: - return set_file_allocation_info(work, fp, buf); + { + if (buf_len < sizeof(struct smb2_file_alloc_info)) + return -EINVAL; + return set_file_allocation_info(work, fp, + (struct smb2_file_alloc_info *)req->Buffer); + } case FILE_END_OF_FILE_INFORMATION: - return set_end_of_file_info(work, fp, buf); + { + if (buf_len < sizeof(struct smb2_file_eof_info)) + return -EINVAL; + return set_end_of_file_info(work, fp, + (struct smb2_file_eof_info *)req->Buffer); + } case FILE_RENAME_INFORMATION: + { if (!test_tree_conn_flag(work->tcon, KSMBD_TREE_CONN_FLAG_WRITABLE)) { ksmbd_debug(SMB, "User does not have write permission\n"); return -EACCES; } - return set_rename_info(work, fp, buf); + if (buf_len < sizeof(struct smb2_file_rename_info)) + return -EINVAL; + + return set_rename_info(work, fp, + (struct smb2_file_rename_info *)req->Buffer, + buf_len); + } case FILE_LINK_INFORMATION: + { + if (buf_len < sizeof(struct smb2_file_link_info)) + return -EINVAL; + return smb2_create_link(work, work->tcon->share_conf, - (struct smb2_file_link_info *)buf, fp->filp, + (struct smb2_file_link_info *)req->Buffer, + buf_len, fp->filp, work->sess->conn->local_nls); - + } case FILE_DISPOSITION_INFORMATION: + { if (!test_tree_conn_flag(work->tcon, KSMBD_TREE_CONN_FLAG_WRITABLE)) { ksmbd_debug(SMB, "User does not have write permission\n"); return -EACCES; } - return set_file_disposition_info(fp, buf); + if (buf_len < sizeof(struct smb2_file_disposition_info)) + return -EINVAL; + + return set_file_disposition_info(fp, + (struct smb2_file_disposition_info *)req->Buffer); + } case FILE_FULL_EA_INFORMATION: { if (!(fp->daccess & FILE_WRITE_EA_LE)) { @@ -5752,18 +5807,29 @@ static int smb2_set_info_file(struct ksmbd_work *work, struct ksmbd_file *fp, return -EACCES; } - return smb2_set_ea((struct smb2_ea_info *)buf, - &fp->filp->f_path); - } + if (buf_len < sizeof(struct smb2_ea_info)) + return -EINVAL; + return smb2_set_ea((struct smb2_ea_info *)req->Buffer, + buf_len, &fp->filp->f_path); + } case FILE_POSITION_INFORMATION: - return set_file_position_info(fp, buf); + { + if (buf_len < sizeof(struct smb2_file_pos_info)) + return -EINVAL; + return set_file_position_info(fp, (struct smb2_file_pos_info *)req->Buffer); + } case FILE_MODE_INFORMATION: - return set_file_mode_info(fp, buf); + { + if (buf_len < sizeof(struct smb2_file_mode_info)) + return -EINVAL; + + return set_file_mode_info(fp, (struct smb2_file_mode_info *)req->Buffer); + } } - pr_err("Unimplemented Fileinfoclass :%d\n", info_class); + pr_err("Unimplemented Fileinfoclass :%d\n", req->FileInfoClass); return -EOPNOTSUPP; } @@ -5824,8 +5890,7 @@ int smb2_set_info(struct ksmbd_work *work) switch (req->InfoType) { case SMB2_O_INFO_FILE: ksmbd_debug(SMB, "GOT SMB2_O_INFO_FILE\n"); - rc = smb2_set_info_file(work, fp, req->FileInfoClass, - req->Buffer, work->tcon->share_conf); + rc = smb2_set_info_file(work, fp, req, work->tcon->share_conf); break; case SMB2_O_INFO_SECURITY: ksmbd_debug(SMB, "GOT SMB2_O_INFO_SECURITY\n"); -- cgit From 442ff9ebeb0129e90483356f3d79c732e632a7a6 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 29 Sep 2021 15:44:32 +0900 Subject: ksmbd: add validation in smb2 negotiate MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch add validation to check request buffer check in smb2 negotiate and fix null pointer deferencing oops in smb3_preauth_hash_rsp() that found from manual test. Cc: Tom Talpey Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Hyunchul Lee Cc: Sergey Senozhatsky Reviewed-by: Ralph Boehme Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 42 +++++++++++++++++++++++++++++++++++++++++- fs/ksmbd/smb_common.c | 32 +++++++++++++++++++++++++++----- 2 files changed, 68 insertions(+), 6 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 0d915554f532..40882fd47feb 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -1067,6 +1067,7 @@ int smb2_handle_negotiate(struct ksmbd_work *work) struct smb2_negotiate_req *req = work->request_buf; struct smb2_negotiate_rsp *rsp = work->response_buf; int rc = 0; + unsigned int smb2_buf_len, smb2_neg_size; __le32 status; ksmbd_debug(SMB, "Received negotiate request\n"); @@ -1084,6 +1085,44 @@ int smb2_handle_negotiate(struct ksmbd_work *work) goto err_out; } + smb2_buf_len = get_rfc1002_len(work->request_buf); + smb2_neg_size = offsetof(struct smb2_negotiate_req, Dialects) - 4; + if (smb2_neg_size > smb2_buf_len) { + rsp->hdr.Status = STATUS_INVALID_PARAMETER; + rc = -EINVAL; + goto err_out; + } + + if (conn->dialect == SMB311_PROT_ID) { + unsigned int nego_ctxt_off = le32_to_cpu(req->NegotiateContextOffset); + + if (smb2_buf_len < nego_ctxt_off) { + rsp->hdr.Status = STATUS_INVALID_PARAMETER; + rc = -EINVAL; + goto err_out; + } + + if (smb2_neg_size > nego_ctxt_off) { + rsp->hdr.Status = STATUS_INVALID_PARAMETER; + rc = -EINVAL; + goto err_out; + } + + if (smb2_neg_size + le16_to_cpu(req->DialectCount) * sizeof(__le16) > + nego_ctxt_off) { + rsp->hdr.Status = STATUS_INVALID_PARAMETER; + rc = -EINVAL; + goto err_out; + } + } else { + if (smb2_neg_size + le16_to_cpu(req->DialectCount) * sizeof(__le16) > + smb2_buf_len) { + rsp->hdr.Status = STATUS_INVALID_PARAMETER; + rc = -EINVAL; + goto err_out; + } + } + conn->cli_cap = le32_to_cpu(req->Capabilities); switch (conn->dialect) { case SMB311_PROT_ID: @@ -8244,7 +8283,8 @@ void smb3_preauth_hash_rsp(struct ksmbd_work *work) WORK_BUFFERS(work, req, rsp); - if (le16_to_cpu(req->Command) == SMB2_NEGOTIATE_HE) + if (le16_to_cpu(req->Command) == SMB2_NEGOTIATE_HE && + conn->preauth_info) ksmbd_gen_preauth_integrity_hash(conn, (char *)rsp, conn->preauth_info->Preauth_HashValue); diff --git a/fs/ksmbd/smb_common.c b/fs/ksmbd/smb_common.c index 5901b2884c60..db8042a173d0 100644 --- a/fs/ksmbd/smb_common.c +++ b/fs/ksmbd/smb_common.c @@ -169,10 +169,12 @@ static bool supported_protocol(int idx) idx <= server_conf.max_protocol); } -static char *next_dialect(char *dialect, int *next_off) +static char *next_dialect(char *dialect, int *next_off, int bcount) { dialect = dialect + *next_off; - *next_off = strlen(dialect); + *next_off = strnlen(dialect, bcount); + if (dialect[*next_off] != '\0') + return NULL; return dialect; } @@ -187,7 +189,9 @@ static int ksmbd_lookup_dialect_by_name(char *cli_dialects, __le16 byte_count) dialect = cli_dialects; bcount = le16_to_cpu(byte_count); do { - dialect = next_dialect(dialect, &next); + dialect = next_dialect(dialect, &next, bcount); + if (!dialect) + break; ksmbd_debug(SMB, "client requested dialect %s\n", dialect); if (!strcmp(dialect, smb1_protos[i].name)) { @@ -235,13 +239,22 @@ int ksmbd_lookup_dialect_by_id(__le16 *cli_dialects, __le16 dialects_count) static int ksmbd_negotiate_smb_dialect(void *buf) { - __le32 proto; + int smb_buf_length = get_rfc1002_len(buf); + __le32 proto = ((struct smb2_hdr *)buf)->ProtocolId; - proto = ((struct smb2_hdr *)buf)->ProtocolId; if (proto == SMB2_PROTO_NUMBER) { struct smb2_negotiate_req *req; + int smb2_neg_size = + offsetof(struct smb2_negotiate_req, Dialects) - 4; req = (struct smb2_negotiate_req *)buf; + if (smb2_neg_size > smb_buf_length) + goto err_out; + + if (smb2_neg_size + le16_to_cpu(req->DialectCount) * sizeof(__le16) > + smb_buf_length) + goto err_out; + return ksmbd_lookup_dialect_by_id(req->Dialects, req->DialectCount); } @@ -251,10 +264,19 @@ static int ksmbd_negotiate_smb_dialect(void *buf) struct smb_negotiate_req *req; req = (struct smb_negotiate_req *)buf; + if (le16_to_cpu(req->ByteCount) < 2) + goto err_out; + + if (offsetof(struct smb_negotiate_req, DialectsArray) - 4 + + le16_to_cpu(req->ByteCount) > smb_buf_length) { + goto err_out; + } + return ksmbd_lookup_dialect_by_name(req->DialectsArray, req->ByteCount); } +err_out: return BAD_PROT_ID; } -- cgit From 8f77150c15f87796570125a43509f9a81a3d9e49 Mon Sep 17 00:00:00 2001 From: Hyunchul Lee Date: Fri, 24 Sep 2021 22:22:22 +0900 Subject: ksmbd: add buffer validation for SMB2_CREATE_CONTEXT Add buffer validation for SMB2_CREATE_CONTEXT. Cc: Ronnie Sahlberg Reviewed-by: Ralph Boehme Signed-off-by: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/oplock.c | 41 +++++++++++++++++++++++++++++++---------- fs/ksmbd/smb2pdu.c | 25 ++++++++++++++++++++++++- fs/ksmbd/smbacl.c | 21 +++++++++++++++++++-- 3 files changed, 74 insertions(+), 13 deletions(-) diff --git a/fs/ksmbd/oplock.c b/fs/ksmbd/oplock.c index 16b6236d1bd2..f9dae6ef2115 100644 --- a/fs/ksmbd/oplock.c +++ b/fs/ksmbd/oplock.c @@ -1451,26 +1451,47 @@ struct lease_ctx_info *parse_lease_state(void *open_req) */ struct create_context *smb2_find_context_vals(void *open_req, const char *tag) { - char *data_offset; struct create_context *cc; unsigned int next = 0; char *name; struct smb2_create_req *req = (struct smb2_create_req *)open_req; + unsigned int remain_len, name_off, name_len, value_off, value_len, + cc_len; - data_offset = (char *)req + 4 + le32_to_cpu(req->CreateContextsOffset); - cc = (struct create_context *)data_offset; + /* + * CreateContextsOffset and CreateContextsLength are guaranteed to + * be valid because of ksmbd_smb2_check_message(). + */ + cc = (struct create_context *)((char *)req + 4 + + le32_to_cpu(req->CreateContextsOffset)); + remain_len = le32_to_cpu(req->CreateContextsLength); do { - int val; - cc = (struct create_context *)((char *)cc + next); - name = le16_to_cpu(cc->NameOffset) + (char *)cc; - val = le16_to_cpu(cc->NameLength); - if (val < 4) + if (remain_len < offsetof(struct create_context, Buffer)) return ERR_PTR(-EINVAL); - if (memcmp(name, tag, val) == 0) - return cc; next = le32_to_cpu(cc->Next); + name_off = le16_to_cpu(cc->NameOffset); + name_len = le16_to_cpu(cc->NameLength); + value_off = le16_to_cpu(cc->DataOffset); + value_len = le32_to_cpu(cc->DataLength); + cc_len = next ? next : remain_len; + + if ((next & 0x7) != 0 || + next > remain_len || + name_off != offsetof(struct create_context, Buffer) || + name_len < 4 || + name_off + name_len > cc_len || + (value_off & 0x7) != 0 || + (value_off && (value_off < name_off + name_len)) || + ((u64)value_off + value_len > cc_len)) + return ERR_PTR(-EINVAL); + + name = (char *)cc + name_off; + if (memcmp(name, tag, name_len) == 0) + return cc; + + remain_len -= next; } while (next != 0); return NULL; diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 40882fd47feb..99c6349a44fa 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -2427,6 +2427,10 @@ static int smb2_create_sd_buffer(struct ksmbd_work *work, ksmbd_debug(SMB, "Set ACLs using SMB2_CREATE_SD_BUFFER context\n"); sd_buf = (struct create_sd_buf_req *)context; + if (le16_to_cpu(context->DataOffset) + + le32_to_cpu(context->DataLength) < + sizeof(struct create_sd_buf_req)) + return -EINVAL; return set_info_sec(work->conn, work->tcon, path, &sd_buf->ntsd, le32_to_cpu(sd_buf->ccontext.DataLength), true); } @@ -2621,6 +2625,12 @@ int smb2_open(struct ksmbd_work *work) goto err_out1; } else if (context) { ea_buf = (struct create_ea_buf_req *)context; + if (le16_to_cpu(context->DataOffset) + + le32_to_cpu(context->DataLength) < + sizeof(struct create_ea_buf_req)) { + rc = -EINVAL; + goto err_out1; + } if (req->CreateOptions & FILE_NO_EA_KNOWLEDGE_LE) { rsp->hdr.Status = STATUS_ACCESS_DENIED; rc = -EACCES; @@ -2659,6 +2669,12 @@ int smb2_open(struct ksmbd_work *work) } else if (context) { struct create_posix *posix = (struct create_posix *)context; + if (le16_to_cpu(context->DataOffset) + + le32_to_cpu(context->DataLength) < + sizeof(struct create_posix)) { + rc = -EINVAL; + goto err_out1; + } ksmbd_debug(SMB, "get posix context\n"); posix_mode = le32_to_cpu(posix->Mode); @@ -3049,9 +3065,16 @@ int smb2_open(struct ksmbd_work *work) rc = PTR_ERR(az_req); goto err_out; } else if (az_req) { - loff_t alloc_size = le64_to_cpu(az_req->AllocationSize); + loff_t alloc_size; int err; + if (le16_to_cpu(az_req->ccontext.DataOffset) + + le32_to_cpu(az_req->ccontext.DataLength) < + sizeof(struct create_alloc_size_req)) { + rc = -EINVAL; + goto err_out; + } + alloc_size = le64_to_cpu(az_req->AllocationSize); ksmbd_debug(SMB, "request smb2 create allocate size : %llu\n", alloc_size); diff --git a/fs/ksmbd/smbacl.c b/fs/ksmbd/smbacl.c index 0a95cdec8c80..bd792db32623 100644 --- a/fs/ksmbd/smbacl.c +++ b/fs/ksmbd/smbacl.c @@ -380,7 +380,7 @@ static void parse_dacl(struct user_namespace *user_ns, { int i, ret; int num_aces = 0; - int acl_size; + unsigned int acl_size; char *acl_base; struct smb_ace **ppace; struct posix_acl_entry *cf_pace, *cf_pdace; @@ -392,7 +392,7 @@ static void parse_dacl(struct user_namespace *user_ns, return; /* validate that we do not go past end of acl */ - if (end_of_acl <= (char *)pdacl || + if (end_of_acl < (char *)pdacl + sizeof(struct smb_acl) || end_of_acl < (char *)pdacl + le16_to_cpu(pdacl->size)) { pr_err("ACL too small to parse DACL\n"); return; @@ -431,8 +431,22 @@ static void parse_dacl(struct user_namespace *user_ns, * user/group/other have no permissions */ for (i = 0; i < num_aces; ++i) { + if (end_of_acl - acl_base < acl_size) + break; + ppace[i] = (struct smb_ace *)(acl_base + acl_size); acl_base = (char *)ppace[i]; + acl_size = offsetof(struct smb_ace, sid) + + offsetof(struct smb_sid, sub_auth); + + if (end_of_acl - acl_base < acl_size || + ppace[i]->sid.num_subauth > SID_MAX_SUB_AUTHORITIES || + (end_of_acl - acl_base < + acl_size + sizeof(__le32) * ppace[i]->sid.num_subauth) || + (le16_to_cpu(ppace[i]->size) < + acl_size + sizeof(__le32) * ppace[i]->sid.num_subauth)) + break; + acl_size = le16_to_cpu(ppace[i]->size); ppace[i]->access_req = smb_map_generic_desired_access(ppace[i]->access_req); @@ -807,6 +821,9 @@ int parse_sec_desc(struct user_namespace *user_ns, struct smb_ntsd *pntsd, if (!pntsd) return -EIO; + if (acl_len < sizeof(struct smb_ntsd)) + return -EINVAL; + owner_sid_ptr = (struct smb_sid *)((char *)pntsd + le32_to_cpu(pntsd->osidoffset)); group_sid_ptr = (struct smb_sid *)((char *)pntsd + -- cgit From 4227f811cdeb4d85db91ea6b9adf9ac049cec12e Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 29 Sep 2021 19:52:51 +0900 Subject: ksmbd: fix transform header validation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Validate that the transform and smb request headers are present before checking OriginalMessageSize and SessionId fields. Cc: Ronnie Sahlberg Cc: Ralph Böhme Cc: Sergey Senozhatsky Reviewed-by: Tom Talpey Acked-by: Hyunchul Lee Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/ksmbd/smb2pdu.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 99c6349a44fa..dcf907738610 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -8414,16 +8414,8 @@ int smb3_decrypt_req(struct ksmbd_work *work) unsigned int buf_data_size = pdu_length + 4 - sizeof(struct smb2_transform_hdr); struct smb2_transform_hdr *tr_hdr = (struct smb2_transform_hdr *)buf; - unsigned int orig_len = le32_to_cpu(tr_hdr->OriginalMessageSize); int rc = 0; - sess = ksmbd_session_lookup_all(conn, le64_to_cpu(tr_hdr->SessionId)); - if (!sess) { - pr_err("invalid session id(%llx) in transform header\n", - le64_to_cpu(tr_hdr->SessionId)); - return -ECONNABORTED; - } - if (pdu_length + 4 < sizeof(struct smb2_transform_hdr) + sizeof(struct smb2_hdr)) { pr_err("Transform message is too small (%u)\n", @@ -8431,11 +8423,19 @@ int smb3_decrypt_req(struct ksmbd_work *work) return -ECONNABORTED; } - if (pdu_length + 4 < orig_len + sizeof(struct smb2_transform_hdr)) { + if (pdu_length + 4 < + le32_to_cpu(tr_hdr->OriginalMessageSize) + sizeof(struct smb2_transform_hdr)) { pr_err("Transform message is broken\n"); return -ECONNABORTED; } + sess = ksmbd_session_lookup_all(conn, le64_to_cpu(tr_hdr->SessionId)); + if (!sess) { + pr_err("invalid session id(%llx) in transform header\n", + le64_to_cpu(tr_hdr->SessionId)); + return -ECONNABORTED; + } + iov[0].iov_base = buf; iov[0].iov_len = sizeof(struct smb2_transform_hdr); iov[1].iov_base = buf + sizeof(struct smb2_transform_hdr); -- cgit From 87ffb310d5e8a441721a9d04dfa7c90cd9da3916 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 30 Sep 2021 15:24:56 +0300 Subject: ksmbd: missing check for NULL in convert_to_nt_pathname() The kmalloc() does not have a NULL check. This code can be re-written slightly cleaner to just use the kstrdup(). Fixes: 265fd1991c1d ("ksmbd: use LOOKUP_BENEATH to prevent the out of share access") Signed-off-by: Dan Carpenter Acked-by: Namjae Jeon Acked-by: Hyunchul Lee Signed-off-by: Steve French --- fs/ksmbd/misc.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/fs/ksmbd/misc.c b/fs/ksmbd/misc.c index 6a19f4bc692d..60e7ac62c917 100644 --- a/fs/ksmbd/misc.c +++ b/fs/ksmbd/misc.c @@ -162,17 +162,14 @@ char *convert_to_nt_pathname(char *filename) { char *ab_pathname; - if (strlen(filename) == 0) { - ab_pathname = kmalloc(2, GFP_KERNEL); - ab_pathname[0] = '\\'; - ab_pathname[1] = '\0'; - } else { - ab_pathname = kstrdup(filename, GFP_KERNEL); - if (!ab_pathname) - return NULL; + if (strlen(filename) == 0) + filename = "\\"; - ksmbd_conv_path_to_windows(ab_pathname); - } + ab_pathname = kstrdup(filename, GFP_KERNEL); + if (!ab_pathname) + return NULL; + + ksmbd_conv_path_to_windows(ab_pathname); return ab_pathname; } -- cgit From a2c2f0826e2b75560b31daf1cd9a755ab93cf4c6 Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Fri, 20 Aug 2021 12:45:05 +0800 Subject: ext4: limit the number of blocks in one ADD_RANGE TLV Now EXT4_FC_TAG_ADD_RANGE uses ext4_extent to track the newly-added blocks, but the limit on the max value of ee_len field is ignored, and it can lead to BUG_ON as shown below when running command "fallocate -l 128M file" on a fast_commit-enabled fs: kernel BUG at fs/ext4/ext4_extents.h:199! invalid opcode: 0000 [#1] SMP PTI CPU: 3 PID: 624 Comm: fallocate Not tainted 5.14.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:ext4_fc_write_inode_data+0x1f3/0x200 Call Trace: ? ext4_fc_write_inode+0xf2/0x150 ext4_fc_commit+0x93b/0xa00 ? ext4_fallocate+0x1ad/0x10d0 ext4_sync_file+0x157/0x340 ? ext4_sync_file+0x157/0x340 vfs_fsync_range+0x49/0x80 do_fsync+0x3d/0x70 __x64_sys_fsync+0x14/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Simply fixing it by limiting the number of blocks in one EXT4_FC_TAG_ADD_RANGE TLV. Fixes: aa75f4d3daae ("ext4: main fast-commit commit path") Cc: stable@kernel.org Signed-off-by: Hou Tao Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210820044505.474318-1-houtao1@huawei.com --- fs/ext4/fast_commit.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c index 8e610a381862..8ea5a81e6554 100644 --- a/fs/ext4/fast_commit.c +++ b/fs/ext4/fast_commit.c @@ -892,6 +892,12 @@ static int ext4_fc_write_inode_data(struct inode *inode, u32 *crc) sizeof(lrange), (u8 *)&lrange, crc)) return -ENOSPC; } else { + unsigned int max = (map.m_flags & EXT4_MAP_UNWRITTEN) ? + EXT_UNWRITTEN_MAX_LEN : EXT_INIT_MAX_LEN; + + /* Limit the number of blocks in one extent */ + map.m_len = min(max, map.m_len); + fc_ext.fc_ino = cpu_to_le32(inode->i_ino); ex = (struct ext4_extent *)&fc_ext.fc_ex; ex->ee_block = cpu_to_le32(map.m_lblk); -- cgit From 6fed83957f21eff11c8496e9f24253b03d2bc1dc Mon Sep 17 00:00:00 2001 From: Jeffle Xu Date: Mon, 23 Aug 2021 14:13:58 +0800 Subject: ext4: fix reserved space counter leakage When ext4_insert_delayed block receives and recovers from an error from ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the space it has reserved for that block insertion as it should. One effect of this bug is that s_dirtyclusters_counter is not decremented and remains incorrectly elevated until the file system has been unmounted. This can result in premature ENOSPC returns and apparent loss of free space. Another effect of this bug is that /sys/fs/ext4//delayed_allocation_blocks can remain non-zero even after syncfs has been executed on the filesystem. Besides, add check for s_dirtyclusters_counter when inode is going to be evicted and freed. s_dirtyclusters_counter can still keep non-zero until inode is written back in .evict_inode(), and thus the check is delayed to .destroy_inode(). Fixes: 51865fda28e5 ("ext4: let ext4 maintain extent status tree") Cc: stable@kernel.org Suggested-by: Gao Xiang Signed-off-by: Jeffle Xu Reviewed-by: Eric Whitney Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210823061358.84473-1-jefflexu@linux.alibaba.com --- fs/ext4/inode.c | 5 +++++ fs/ext4/super.c | 6 ++++++ 2 files changed, 11 insertions(+) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 2a076d236ba1..9df1ab070fa5 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1628,6 +1628,7 @@ static int ext4_insert_delayed_block(struct inode *inode, ext4_lblk_t lblk) struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); int ret; bool allocated = false; + bool reserved = false; /* * If the cluster containing lblk is shared with a delayed, @@ -1644,6 +1645,7 @@ static int ext4_insert_delayed_block(struct inode *inode, ext4_lblk_t lblk) ret = ext4_da_reserve_space(inode); if (ret != 0) /* ENOSPC */ goto errout; + reserved = true; } else { /* bigalloc */ if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk)) { if (!ext4_es_scan_clu(inode, @@ -1656,6 +1658,7 @@ static int ext4_insert_delayed_block(struct inode *inode, ext4_lblk_t lblk) ret = ext4_da_reserve_space(inode); if (ret != 0) /* ENOSPC */ goto errout; + reserved = true; } else { allocated = true; } @@ -1666,6 +1669,8 @@ static int ext4_insert_delayed_block(struct inode *inode, ext4_lblk_t lblk) } ret = ext4_es_insert_delayed_block(inode, lblk, allocated); + if (ret && reserved) + ext4_da_release_space(inode, 1); errout: return ret; diff --git a/fs/ext4/super.c b/fs/ext4/super.c index feca816b6bf3..a52f1572daa5 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1352,6 +1352,12 @@ static void ext4_destroy_inode(struct inode *inode) true); dump_stack(); } + + if (EXT4_I(inode)->i_reserved_data_blocks) + ext4_msg(inode->i_sb, KERN_ERR, + "Inode %lu (%p): i_reserved_data_blocks (%u) not cleared!", + inode->i_ino, EXT4_I(inode), + EXT4_I(inode)->i_reserved_data_blocks); } static void init_once(void *foo) -- cgit From 75ca6ad408f459f00b09a64f04c774559848c097 Mon Sep 17 00:00:00 2001 From: Ritesh Harjani Date: Sat, 5 Jun 2021 10:39:32 +0530 Subject: ext4: fix loff_t overflow in ext4_max_bitmap_size() We should use unsigned long long rather than loff_t to avoid overflow in ext4_max_bitmap_size() for comparison before returning. w/o this patch sbi->s_bitmap_maxbytes was becoming a negative value due to overflow of upper_limit (with has_huge_files as true) Below is a quick test to trigger it on a 64KB pagesize system. sudo mkfs.ext4 -b 65536 -O ^has_extents,^64bit /dev/loop2 sudo mount /dev/loop2 /mnt sudo echo "hello" > /mnt/hello -> This will error out with "echo: write error: File too large" Signed-off-by: Ritesh Harjani Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Link: https://lore.kernel.org/r/594f409e2c543e90fd836b78188dfa5c575065ba.1622867594.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index a52f1572daa5..9b5b2f63b470 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3030,17 +3030,17 @@ static loff_t ext4_max_size(int blkbits, int has_huge_files) */ static loff_t ext4_max_bitmap_size(int bits, int has_huge_files) { - loff_t res = EXT4_NDIR_BLOCKS; + unsigned long long upper_limit, res = EXT4_NDIR_BLOCKS; int meta_blocks; - loff_t upper_limit; - /* This is calculated to be the largest file size for a dense, block + + /* + * This is calculated to be the largest file size for a dense, block * mapped file such that the file's total number of 512-byte sectors, * including data and all indirect blocks, does not exceed (2^48 - 1). * * __u32 i_blocks_lo and _u16 i_blocks_high represent the total * number of 512-byte sectors of the file. */ - if (!has_huge_files) { /* * !has_huge_files or implies that the inode i_block field @@ -3083,7 +3083,7 @@ static loff_t ext4_max_bitmap_size(int bits, int has_huge_files) if (res > MAX_LFS_FILESIZE) res = MAX_LFS_FILESIZE; - return res; + return (loff_t)res; } static ext4_fsblk_t descriptor_loc(struct super_block *sb, -- cgit From bb9464e08309f6befe80866f5be51778ca355ee9 Mon Sep 17 00:00:00 2001 From: yangerkun Date: Fri, 24 Sep 2021 17:39:17 +0800 Subject: ext4: flush s_error_work before journal destroy in ext4_fill_super The error path in ext4_fill_super forget to flush s_error_work before journal destroy, and it may trigger the follow bug since flush_stashed_error_work can run concurrently with journal destroy without any protection for sbi->s_journal. [32031.740193] EXT4-fs (loop66): get root inode failed [32031.740484] EXT4-fs (loop66): mount failed [32031.759805] ------------[ cut here ]------------ [32031.759807] kernel BUG at fs/jbd2/transaction.c:373! [32031.760075] invalid opcode: 0000 [#1] SMP PTI [32031.760336] CPU: 5 PID: 1029268 Comm: kworker/5:1 Kdump: loaded 4.18.0 [32031.765112] Call Trace: [32031.765375] ? __switch_to_asm+0x35/0x70 [32031.765635] ? __switch_to_asm+0x41/0x70 [32031.765893] ? __switch_to_asm+0x35/0x70 [32031.766148] ? __switch_to_asm+0x41/0x70 [32031.766405] ? _cond_resched+0x15/0x40 [32031.766665] jbd2__journal_start+0xf1/0x1f0 [jbd2] [32031.766934] jbd2_journal_start+0x19/0x20 [jbd2] [32031.767218] flush_stashed_error_work+0x30/0x90 [ext4] [32031.767487] process_one_work+0x195/0x390 [32031.767747] worker_thread+0x30/0x390 [32031.768007] ? process_one_work+0x390/0x390 [32031.768265] kthread+0x10d/0x130 [32031.768521] ? kthread_flush_work_fn+0x10/0x10 [32031.768778] ret_from_fork+0x35/0x40 static int start_this_handle(...) BUG_ON(journal->j_flags & JBD2_UNMOUNT); <---- Trigger this Besides, after we enable fast commit, ext4_fc_replay can add work to s_error_work but return success, so the latter journal destroy in ext4_load_journal can trigger this problem too. Fix this problem with two steps: 1. Call ext4_commit_super directly in ext4_handle_error for the case that called from ext4_fc_replay 2. Since it's hard to pair the init and flush for s_error_work, we'd better add a extras flush_work before journal destroy in ext4_fill_super Besides, this patch will call ext4_commit_super in ext4_handle_error for any nojournal case too. But it seems safe since the reason we call schedule_work was that we should save error info to sb through journal if available. Conversely, for the nojournal case, it seems useless delay commit superblock to s_error_work. Fixes: c92dc856848f ("ext4: defer saving error info from atomic context") Fixes: 2d01ddc86606 ("ext4: save error info to sb through journal if available") Cc: stable@kernel.org Signed-off-by: yangerkun Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210924093917.1953239-1-yangerkun@huawei.com --- fs/ext4/super.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 9b5b2f63b470..0049eac9de1a 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -660,7 +660,7 @@ static void ext4_handle_error(struct super_block *sb, bool force_ro, int error, * constraints, it may not be safe to do it right here so we * defer superblock flushing to a workqueue. */ - if (continue_fs) + if (continue_fs && journal) schedule_work(&EXT4_SB(sb)->s_error_work); else ext4_commit_super(sb); @@ -5050,12 +5050,15 @@ failed_mount_wq: sbi->s_ea_block_cache = NULL; if (sbi->s_journal) { + /* flush s_error_work before journal destroy. */ + flush_work(&sbi->s_error_work); jbd2_journal_destroy(sbi->s_journal); sbi->s_journal = NULL; } failed_mount3a: ext4_es_unregister_shrinker(sbi); failed_mount3: + /* flush s_error_work before sbi destroy */ flush_work(&sbi->s_error_work); del_timer_sync(&sbi->s_err_report); ext4_stop_mmpd(sbi); -- cgit From 42cb447410d024e9d54139ae9c21ea132a8c384c Mon Sep 17 00:00:00 2001 From: yangerkun Date: Tue, 14 Sep 2021 19:14:15 +0800 Subject: ext4: fix potential infinite loop in ext4_dx_readdir() When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an infinite loop since if info->last_pos != ctx->pos this will reset the directory scan and reread the failing entry. For example: 1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as leaf block which own the ext4_dir_entry_2 2. block 1 read ok and call_filldir which will fill the dirent and update the ctx->pos 3. block 2 read fail, but we has already fill some dirent, so we will return back to userspace will a positive return val(see ksys_getdents64) 4. the second ext4_dx_readdir will reset the world since info->last_pos != ctx->pos, and will also init the curr_hash which pos to block 1 5. So we will read block1 too, and once block2 still read fail, we can only fill one dirent because the hash of the entry in block1(besides the last one) won't greater than curr_hash 6. this time, we forget update last_pos too since the read for block2 will fail, and since we has got the one entry, ksys_getdents64 can return success 7. Latter we will trapped in a loop with step 4~6 Cc: stable@kernel.org Signed-off-by: yangerkun Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com --- fs/ext4/dir.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c index ffb295aa891c..74b172a4adda 100644 --- a/fs/ext4/dir.c +++ b/fs/ext4/dir.c @@ -551,7 +551,7 @@ static int ext4_dx_readdir(struct file *file, struct dir_context *ctx) struct dir_private_info *info = file->private_data; struct inode *inode = file_inode(file); struct fname *fname; - int ret; + int ret = 0; if (!info) { info = ext4_htree_create_dir_info(file, ctx->pos); @@ -599,7 +599,7 @@ static int ext4_dx_readdir(struct file *file, struct dir_context *ctx) info->curr_minor_hash, &info->next_hash); if (ret < 0) - return ret; + goto finished; if (ret == 0) { ctx->pos = ext4_get_htree_eof(file); break; @@ -630,7 +630,7 @@ static int ext4_dx_readdir(struct file *file, struct dir_context *ctx) } finished: info->last_pos = ctx->pos; - return 0; + return ret < 0 ? ret : 0; } static int ext4_release_dir(struct inode *inode, struct file *filp) -- cgit From f2c77973507fd116c3657df1dc048864a2b16a1c Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Fri, 10 Sep 2021 16:03:16 +0800 Subject: ext4: recheck buffer uptodate bit under buffer lock Commit 8e33fadf945a ("ext4: remove an unnecessary if statement in __ext4_get_inode_loc()") forget to recheck buffer's uptodate bit again under buffer lock, which may overwrite the buffer if someone else have already brought it uptodate and changed it. Fixes: 8e33fadf945a ("ext4: remove an unnecessary if statement in __ext4_get_inode_loc()") Cc: stable@kernel.org Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210910080316.70421-1-yi.zhang@huawei.com --- fs/ext4/inode.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 9df1ab070fa5..b7c561ad38dd 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4277,6 +4277,12 @@ static int __ext4_get_inode_loc(struct super_block *sb, unsigned long ino, goto has_buffer; lock_buffer(bh); + if (ext4_buffer_uptodate(bh)) { + /* Someone brought it uptodate while we waited */ + unlock_buffer(bh); + goto has_buffer; + } + /* * If we have all information of the inode in memory and this * is the only valid inode in the block, we need not read the -- cgit From 24ff652573754fe4c03213ebd26b17e86842feb3 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 30 Sep 2021 12:43:10 +0200 Subject: objtool: Teach get_alt_entry() about more relocation types Occasionally objtool encounters symbol (as opposed to section) relocations in .altinstructions. Typically they are the alternatives written by elf_add_alternative() as encountered on a noinstr validation run on vmlinux after having already ran objtool on the individual .o files. Basically this is the counterpart of commit 44f6a7c0755d ("objtool: Fix seg fault with Clang non-section symbols"), because when these new assemblers (binutils now also does this) strip the section symbols, elf_add_reloc_to_insn() is forced to emit symbol based relocations. As such, teach get_alt_entry() about different relocation types. Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls") Reported-by: Stephen Rothwell Reported-by: Borislav Petkov Signed-off-by: Peter Zijlstra (Intel) Acked-by: Josh Poimboeuf Tested-by: Nathan Chancellor Link: https://lore.kernel.org/r/YVWUvknIEVNkPvnP@hirez.programming.kicks-ass.net --- tools/objtool/special.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) diff --git a/tools/objtool/special.c b/tools/objtool/special.c index bc925cf19e2d..f58ecc50fb10 100644 --- a/tools/objtool/special.c +++ b/tools/objtool/special.c @@ -58,6 +58,24 @@ void __weak arch_handle_alternative(unsigned short feature, struct special_alt * { } +static bool reloc2sec_off(struct reloc *reloc, struct section **sec, unsigned long *off) +{ + switch (reloc->sym->type) { + case STT_FUNC: + *sec = reloc->sym->sec; + *off = reloc->sym->offset + reloc->addend; + return true; + + case STT_SECTION: + *sec = reloc->sym->sec; + *off = reloc->addend; + return true; + + default: + return false; + } +} + static int get_alt_entry(struct elf *elf, struct special_entry *entry, struct section *sec, int idx, struct special_alt *alt) @@ -91,15 +109,12 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, WARN_FUNC("can't find orig reloc", sec, offset + entry->orig); return -1; } - if (orig_reloc->sym->type != STT_SECTION) { - WARN_FUNC("don't know how to handle non-section reloc symbol %s", + if (!reloc2sec_off(orig_reloc, &alt->orig_sec, &alt->orig_off)) { + WARN_FUNC("don't know how to handle reloc symbol type: %s", sec, offset + entry->orig, orig_reloc->sym->name); return -1; } - alt->orig_sec = orig_reloc->sym->sec; - alt->orig_off = orig_reloc->addend; - if (!entry->group || alt->new_len) { new_reloc = find_reloc_by_dest(elf, sec, offset + entry->new); if (!new_reloc) { @@ -116,8 +131,11 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, if (arch_is_retpoline(new_reloc->sym)) return 1; - alt->new_sec = new_reloc->sym->sec; - alt->new_off = (unsigned int)new_reloc->addend; + if (!reloc2sec_off(new_reloc, &alt->new_sec, &alt->new_off)) { + WARN_FUNC("don't know how to handle reloc symbol type: %s", + sec, offset + entry->new, new_reloc->sym->name); + return -1; + } /* _ASM_EXTABLE_EX hack */ if (alt->new_off >= 0x7ffffff0) -- cgit From 02d029a41dc986e2d5a77ecca45803857b346829 Mon Sep 17 00:00:00 2001 From: Anand K Mistry Date: Wed, 29 Sep 2021 17:04:21 +1000 Subject: perf/x86: Reset destroy callback on event init failure perf_init_event tries multiple init callbacks and does not reset the event state between tries. When x86_pmu_event_init runs, it unconditionally sets the destroy callback to hw_perf_event_destroy. On the next init attempt after x86_pmu_event_init, in perf_try_init_event, if the pmu's capabilities includes PERF_PMU_CAP_NO_EXCLUDE, the destroy callback will be run. However, if the next init didn't set the destroy callback, hw_perf_event_destroy will be run (since the callback wasn't reset). Looking at other pmu init functions, the common pattern is to only set the destroy callback on a successful init. Resetting the callback on failure tries to replicate that pattern. This was discovered after commit f11dd0d80555 ("perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op") when the second (and only second) run of the perf tool after a reboot results in 0 samples being generated. The extra run of hw_perf_event_destroy results in active_events having an extra decrement on each perf run. The second run has active_events == 0 and every subsequent run has active_events < 0. When active_events == 0, the NMI handler will early-out and not record any samples. Signed-off-by: Anand K Mistry Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210929170405.1.I078b98ee7727f9ae9d6df8262bad7e325e40faf0@changeid --- arch/x86/events/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 2a57dbed4894..6dfa8ddaa60f 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -2465,6 +2465,7 @@ static int x86_pmu_event_init(struct perf_event *event) if (err) { if (event->destroy) event->destroy(event); + event->destroy = NULL; } if (READ_ONCE(x86_pmu.attr_rdpmc) && -- cgit From ecc2123e09f9e71ddc6c53d71e283b8ada685fe2 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Tue, 28 Sep 2021 08:19:03 -0700 Subject: perf/x86/intel: Update event constraints for ICX According to the latest event list, the event encoding 0xEF is only available on the first 4 counters. Add it into the event constraints table. Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support") Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/1632842343-25862-1-git-send-email-kan.liang@linux.intel.com --- arch/x86/events/intel/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 7011e87be6d0..9a044438072b 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -263,6 +263,7 @@ static struct event_constraint intel_icl_event_constraints[] = { INTEL_EVENT_CONSTRAINT_RANGE(0xa8, 0xb0, 0xf), INTEL_EVENT_CONSTRAINT_RANGE(0xb7, 0xbd, 0xf), INTEL_EVENT_CONSTRAINT_RANGE(0xd0, 0xe6, 0xf), + INTEL_EVENT_CONSTRAINT(0xef, 0xf), INTEL_EVENT_CONSTRAINT_RANGE(0xf0, 0xf4, 0xf), EVENT_CONSTRAINT_END }; -- cgit From f792565326825ed806626da50c6f9a928f1079c1 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Wed, 29 Sep 2021 12:43:13 -0700 Subject: perf/core: fix userpage->time_enabled of inactive events Users of rdpmc rely on the mmapped user page to calculate accurate time_enabled. Currently, userpage->time_enabled is only updated when the event is added to the pmu. As a result, inactive event (due to counter multiplexing) does not have accurate userpage->time_enabled. This can be reproduced with something like: /* open 20 task perf_event "cycles", to create multiplexing */ fd = perf_event_open(); /* open task perf_event "cycles" */ userpage = mmap(fd); /* use mmap and rdmpc */ while (true) { time_enabled_mmap = xxx; /* use logic in perf_event_mmap_page */ time_enabled_read = read(fd).time_enabled; if (time_enabled_mmap > time_enabled_read) BUG(); } Fix this by updating userpage for inactive events in merge_sched_in. Suggested-by: Peter Zijlstra (Intel) Reported-and-tested-by: Lucian Grijincu Signed-off-by: Song Liu Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210929194313.2398474-1-songliubraving@fb.com --- include/linux/perf_event.h | 4 +++- kernel/events/core.c | 34 ++++++++++++++++++++++++++++++---- 2 files changed, 33 insertions(+), 5 deletions(-) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index fe156a8170aa..9b60bb89d86a 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -683,7 +683,9 @@ struct perf_event { /* * timestamp shadows the actual context timing but it can * be safely used in NMI interrupt context. It reflects the - * context time as it was when the event was last scheduled in. + * context time as it was when the event was last scheduled in, + * or when ctx_sched_in failed to schedule the event because we + * run out of PMC. * * ctx_time already accounts for ctx->timestamp. Therefore to * compute ctx_time for a sample, simply add perf_clock(). diff --git a/kernel/events/core.c b/kernel/events/core.c index 0c000cb01eeb..f23ca260307f 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -3707,6 +3707,29 @@ static noinline int visit_groups_merge(struct perf_cpu_context *cpuctx, return 0; } +static inline bool event_update_userpage(struct perf_event *event) +{ + if (likely(!atomic_read(&event->mmap_count))) + return false; + + perf_event_update_time(event); + perf_set_shadow_time(event, event->ctx); + perf_event_update_userpage(event); + + return true; +} + +static inline void group_update_userpage(struct perf_event *group_event) +{ + struct perf_event *event; + + if (!event_update_userpage(group_event)) + return; + + for_each_sibling_event(event, group_event) + event_update_userpage(event); +} + static int merge_sched_in(struct perf_event *event, void *data) { struct perf_event_context *ctx = event->ctx; @@ -3725,14 +3748,15 @@ static int merge_sched_in(struct perf_event *event, void *data) } if (event->state == PERF_EVENT_STATE_INACTIVE) { + *can_add_hw = 0; if (event->attr.pinned) { perf_cgroup_event_disable(event, ctx); perf_event_set_state(event, PERF_EVENT_STATE_ERROR); + } else { + ctx->rotate_necessary = 1; + perf_mux_hrtimer_restart(cpuctx); + group_update_userpage(event); } - - *can_add_hw = 0; - ctx->rotate_necessary = 1; - perf_mux_hrtimer_restart(cpuctx); } return 0; @@ -6324,6 +6348,8 @@ accounting: ring_buffer_attach(event, rb); + perf_event_update_time(event); + perf_set_shadow_time(event, event->ctx); perf_event_init_userpage(event); perf_event_update_userpage(event); } else { -- cgit From 2630cde26711dab0d0b56a8be1616475be646d13 Mon Sep 17 00:00:00 2001 From: Michal Koutný Date: Fri, 17 Sep 2021 17:30:37 +0200 Subject: sched/fair: Add ancestors of unthrottled undecayed cfs_rq MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") we add cfs_rqs with no runnable tasks but not fully decayed into the load (leaf) list. We may ignore adding some ancestors and therefore breaking tmp_alone_branch invariant. This broke LTP test cfs_bandwidth01 and it was partially fixed in commit fdaba61ef8a2 ("sched/fair: Ensure that the CFS parent is added after unthrottling"). I noticed the named test still fails even with the fix (but with low probability, 1 in ~1000 executions of the test). The reason is when bailing out of unthrottle_cfs_rq early, we may miss adding ancestors of the unthrottled cfs_rq, thus, not joining tmp_alone_branch properly. Fix this by adding ancestors if we notice the unthrottled cfs_rq was added to the load list. Fixes: a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") Signed-off-by: Michal Koutný Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Vincent Guittot Reviewed-by: Odin Ugedal Link: https://lore.kernel.org/r/20210917153037.11176-1-mkoutny@suse.com --- kernel/sched/fair.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index ff69f245b939..f6a05d9b5443 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -4936,8 +4936,12 @@ void unthrottle_cfs_rq(struct cfs_rq *cfs_rq) /* update hierarchical throttle state */ walk_tg_tree_from(cfs_rq->tg, tg_nop, tg_unthrottle_up, (void *)rq); - if (!cfs_rq->load.weight) + /* Nothing to run but something to decay (on_list)? Complete the branch */ + if (!cfs_rq->load.weight) { + if (cfs_rq->on_list) + goto unthrottle_throttle; return; + } task_delta = cfs_rq->h_nr_running; idle_task_delta = cfs_rq->idle_h_nr_running; -- cgit From 703066188f63d66cc6b9d678e5b5ef1213c5938e Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 27 Sep 2021 12:46:35 +0100 Subject: sched/fair: Null terminate buffer when updating tunable_scaling This patch null-terminates the temporary buffer in sched_scaling_write() so kstrtouint() does not return failure and checks the value is valid. Before: $ cat /sys/kernel/debug/sched/tunable_scaling 1 $ echo 0 > /sys/kernel/debug/sched/tunable_scaling -bash: echo: write error: Invalid argument $ cat /sys/kernel/debug/sched/tunable_scaling 1 After: $ cat /sys/kernel/debug/sched/tunable_scaling 1 $ echo 0 > /sys/kernel/debug/sched/tunable_scaling $ cat /sys/kernel/debug/sched/tunable_scaling 0 $ echo 3 > /sys/kernel/debug/sched/tunable_scaling -bash: echo: write error: Invalid argument Fixes: 8a99b6833c88 ("sched: Move SCHED_DEBUG sysctl to debugfs") Signed-off-by: Mel Gorman Signed-off-by: Peter Zijlstra (Intel) Acked-by: Vincent Guittot Link: https://lore.kernel.org/r/20210927114635.GH3959@techsingularity.net --- kernel/sched/debug.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c index 49716228efb4..17a653b67006 100644 --- a/kernel/sched/debug.c +++ b/kernel/sched/debug.c @@ -173,16 +173,22 @@ static ssize_t sched_scaling_write(struct file *filp, const char __user *ubuf, size_t cnt, loff_t *ppos) { char buf[16]; + unsigned int scaling; if (cnt > 15) cnt = 15; if (copy_from_user(&buf, ubuf, cnt)) return -EFAULT; + buf[cnt] = '\0'; - if (kstrtouint(buf, 10, &sysctl_sched_tunable_scaling)) + if (kstrtouint(buf, 10, &scaling)) return -EINVAL; + if (scaling >= SCHED_TUNABLESCALING_END) + return -EINVAL; + + sysctl_sched_tunable_scaling = scaling; if (sched_update_scaling()) return -EINVAL; -- cgit From 83d40a61046f73103b4e5d8f1310261487ff63b0 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 20 Sep 2021 15:31:11 +0200 Subject: sched: Always inline is_percpu_thread() vmlinux.o: warning: objtool: check_preemption_disabled()+0x81: call to is_percpu_thread() leaves .noinstr.text section Reported-by: Stephen Rothwell Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210928084218.063371959@infradead.org --- include/linux/sched.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 39039ce8ac4c..c1a927ddec64 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1720,7 +1720,7 @@ extern struct pid *cad_pid; #define tsk_used_math(p) ((p)->flags & PF_USED_MATH) #define used_math() tsk_used_math(current) -static inline bool is_percpu_thread(void) +static __always_inline bool is_percpu_thread(void) { #ifdef CONFIG_SMP return (current->flags & PF_NO_SETAFFINITY) && -- cgit From 3f008385d46d3cea4a097d2615cd485f2184ba26 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Fri, 1 Oct 2021 10:39:33 +0100 Subject: io_uring: kill fasync We have never supported fasync properly, it would only fire when there is something polling io_uring making it useless. The original support came in through the initial io_uring merge for 5.1. Since it's broken and nobody has reported it, get rid of the fasync bits. Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/r/2f7ca3d344d406d34fa6713824198915c41cea86.1633080236.git.asml.silence@gmail.com Signed-off-by: Jens Axboe --- fs/io_uring.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 82f867983bb3..6b9e70208782 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -403,7 +403,6 @@ struct io_ring_ctx { struct wait_queue_head cq_wait; unsigned cq_extra; atomic_t cq_timeouts; - struct fasync_struct *cq_fasync; unsigned cq_last_tm_flush; } ____cacheline_aligned_in_smp; @@ -1614,10 +1613,8 @@ static void io_cqring_ev_posted(struct io_ring_ctx *ctx) wake_up(&ctx->sq_data->wait); if (io_should_trigger_evfd(ctx)) eventfd_signal(ctx->cq_ev_fd, 1); - if (waitqueue_active(&ctx->poll_wait)) { + if (waitqueue_active(&ctx->poll_wait)) wake_up_interruptible(&ctx->poll_wait); - kill_fasync(&ctx->cq_fasync, SIGIO, POLL_IN); - } } static void io_cqring_ev_posted_iopoll(struct io_ring_ctx *ctx) @@ -1631,10 +1628,8 @@ static void io_cqring_ev_posted_iopoll(struct io_ring_ctx *ctx) } if (io_should_trigger_evfd(ctx)) eventfd_signal(ctx->cq_ev_fd, 1); - if (waitqueue_active(&ctx->poll_wait)) { + if (waitqueue_active(&ctx->poll_wait)) wake_up_interruptible(&ctx->poll_wait); - kill_fasync(&ctx->cq_fasync, SIGIO, POLL_IN); - } } /* Returns true if there are no backlogged entries after the flush */ @@ -9345,13 +9340,6 @@ static __poll_t io_uring_poll(struct file *file, poll_table *wait) return mask; } -static int io_uring_fasync(int fd, struct file *file, int on) -{ - struct io_ring_ctx *ctx = file->private_data; - - return fasync_helper(fd, file, on, &ctx->cq_fasync); -} - static int io_unregister_personality(struct io_ring_ctx *ctx, unsigned id) { const struct cred *creds; @@ -10145,7 +10133,6 @@ static const struct file_operations io_uring_fops = { .mmap_capabilities = io_uring_nommu_mmap_capabilities, #endif .poll = io_uring_poll, - .fasync = io_uring_fasync, #ifdef CONFIG_PROC_FS .show_fdinfo = io_uring_show_fdinfo, #endif -- cgit From f5b667ded07569dd6e33885cffd35fd519cfc942 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 1 Oct 2021 19:14:28 +0200 Subject: thermal: Update information in MAINTAINERS Because Rui is now going to focus on work that is not related to the maintenance of the thermal subsystem in the kernel, Rafael will start to help Daniel with handling the development process as a new member of the thermal maintainers team. Rui will continue to review patches in that area. The thermal development process flow will change so that the material from the thermal git tree will be merged into the thermal branch of the linux-pm.git tree before going into the mainline. Update the information in MAINTAINERS accordingly. Signed-off-by: Rafael J. Wysocki Acked-by: Zhang Rui Acked-by: Daniel Lezcano Signed-off-by: Linus Torvalds --- MAINTAINERS | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 76e0fdcdd877..62257ffca56a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -414,7 +414,8 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm F: drivers/acpi/pmic/ ACPI THERMAL DRIVER -M: Zhang Rui +M: Rafael J. Wysocki +R: Zhang Rui L: linux-acpi@vger.kernel.org S: Supported W: https://01.org/linux-acpi @@ -18549,13 +18550,14 @@ T: git git://linuxtv.org/media_tree.git F: drivers/media/radio/radio-raremono.c THERMAL -M: Zhang Rui +M: Rafael J. Wysocki M: Daniel Lezcano R: Amit Kucheria +R: Zhang Rui L: linux-pm@vger.kernel.org S: Supported Q: https://patchwork.kernel.org/project/linux-pm/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git thermal F: Documentation/devicetree/bindings/thermal/ F: drivers/thermal/ F: include/linux/cpu_cooling.h -- cgit From ffa2600044979aff4bd6238edb9af815a47d7c32 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Wed, 29 Sep 2021 10:36:04 -0500 Subject: hwmon: (occ) Fix P10 VRM temp sensors The P10 (temp sensor version 0x10) doesn't do the same VRM status reporting that was used on P9. It just reports the temperature, so drop the check for VRM fru type in the sysfs show function, and don't set the name to "alarm". Fixes: db4919ec86 ("hwmon: (occ) Add new temperature sensor type") Signed-off-by: Eddie James Link: https://lore.kernel.org/r/20210929153604.14968-1-eajames@linux.ibm.com Signed-off-by: Guenter Roeck --- drivers/hwmon/occ/common.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c index 0d68a78be980..ae664613289c 100644 --- a/drivers/hwmon/occ/common.c +++ b/drivers/hwmon/occ/common.c @@ -340,18 +340,11 @@ static ssize_t occ_show_temp_10(struct device *dev, if (val == OCC_TEMP_SENSOR_FAULT) return -EREMOTEIO; - /* - * VRM doesn't return temperature, only alarm bit. This - * attribute maps to tempX_alarm instead of tempX_input for - * VRM - */ - if (temp->fru_type != OCC_FRU_TYPE_VRM) { - /* sensor not ready */ - if (val == 0) - return -EAGAIN; + /* sensor not ready */ + if (val == 0) + return -EAGAIN; - val *= 1000; - } + val *= 1000; break; case 2: val = temp->fru_type; @@ -886,7 +879,7 @@ static int occ_setup_sensor_attrs(struct occ *occ) 0, i); attr++; - if (sensors->temp.version > 1 && + if (sensors->temp.version == 2 && temp->fru_type == OCC_FRU_TYPE_VRM) { snprintf(attr->name, sizeof(attr->name), "temp%d_alarm", s); -- cgit From f067d5585cda2de1e47dde914a8a4f151659e0ad Mon Sep 17 00:00:00 2001 From: Brandon Wyman Date: Tue, 28 Sep 2021 20:50:51 +0000 Subject: hwmon: (pmbus/ibm-cffps) max_power_out swap changes The bytes for max_power_out from the ibm-cffps devices differ in byte order for some power supplies. The Witherspoon power supply returns the bytes in MSB/LSB order. The Rainier power supply returns the bytes in LSB/MSB order. The Witherspoon power supply uses version cffps1. The Rainier power supply should use version cffps2. If version is cffps1, swap the bytes before output to max_power_out. Tested: Witherspoon before: 3148. Witherspoon after: 3148. Rainier before: 53255. Rainier after: 2000. Signed-off-by: Brandon Wyman Reviewed-by: Eddie James Link: https://lore.kernel.org/r/20210928205051.1222815-1-bjwyman@gmail.com [groeck: Replaced yoda programming] Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/ibm-cffps.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c index df712ce4b164..53f7d1418bc9 100644 --- a/drivers/hwmon/pmbus/ibm-cffps.c +++ b/drivers/hwmon/pmbus/ibm-cffps.c @@ -171,8 +171,14 @@ static ssize_t ibm_cffps_debugfs_read(struct file *file, char __user *buf, cmd = CFFPS_SN_CMD; break; case CFFPS_DEBUGFS_MAX_POWER_OUT: - rc = i2c_smbus_read_word_swapped(psu->client, - CFFPS_MAX_POWER_OUT_CMD); + if (psu->version == cffps1) { + rc = i2c_smbus_read_word_swapped(psu->client, + CFFPS_MAX_POWER_OUT_CMD); + } else { + rc = i2c_smbus_read_word_data(psu->client, + CFFPS_MAX_POWER_OUT_CMD); + } + if (rc < 0) return rc; -- cgit From 2292e2f685cd5c65e3f47bbcf9f469513acc3195 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Mon, 27 Sep 2021 10:07:40 +0300 Subject: hwmon: (pmbus/mp2975) Add missed POUT attribute for page 1 mp2975 controller Add missed attribute for reading POUT from page 1. It is supported by device, but has been missed in initial commit. Fixes: 2c6fcbb21149 ("hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller") Signed-off-by: Vadim Pasternak Link: https://lore.kernel.org/r/20210927070740.2149290-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/mp2975.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c index eb94bd5f4e2a..51986adfbf47 100644 --- a/drivers/hwmon/pmbus/mp2975.c +++ b/drivers/hwmon/pmbus/mp2975.c @@ -54,7 +54,7 @@ #define MP2975_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \ - PMBUS_PHASE_VIRTUAL) + PMBUS_HAVE_POUT | PMBUS_PHASE_VIRTUAL) struct mp2975_data { struct pmbus_driver_info info; -- cgit From 943c15ac1b84d378da26bba41c83c67e16499ac4 Mon Sep 17 00:00:00 2001 From: Nadezda Lutovinova Date: Tue, 21 Sep 2021 18:51:51 +0300 Subject: hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org Signed-off-by: Nadezda Lutovinova Link: https://lore.kernel.org/r/20210921155153.28098-1-lutovinova@ispras.ru [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment] Signed-off-by: Guenter Roeck --- drivers/hwmon/w83791d.c | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 37b25a1474c4..3c1be2c11fdf 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -273,9 +273,6 @@ struct w83791d_data { char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ - /* array of 2 pointers to subclients */ - struct i2c_client *lm75[2]; - /* volts */ u8 in[NUMBER_OF_VIN]; /* Register value */ u8 in_max[NUMBER_OF_VIN]; /* Register value */ @@ -1257,7 +1254,6 @@ static const struct attribute_group w83791d_group_fanpwm45 = { static int w83791d_detect_subclients(struct i2c_client *client) { struct i2c_adapter *adapter = client->adapter; - struct w83791d_data *data = i2c_get_clientdata(client); int address = client->addr; int i, id; u8 val; @@ -1280,22 +1276,19 @@ static int w83791d_detect_subclients(struct i2c_client *client) } val = w83791d_read(client, W83791D_REG_I2C_SUBADDR); - if (!(val & 0x08)) - data->lm75[0] = devm_i2c_new_dummy_device(&client->dev, adapter, - 0x48 + (val & 0x7)); - if (!(val & 0x80)) { - if (!IS_ERR(data->lm75[0]) && - ((val & 0x7) == ((val >> 4) & 0x7))) { - dev_err(&client->dev, - "duplicate addresses 0x%x, " - "use force_subclient\n", - data->lm75[0]->addr); - return -ENODEV; - } - data->lm75[1] = devm_i2c_new_dummy_device(&client->dev, adapter, - 0x48 + ((val >> 4) & 0x7)); + + if (!(val & 0x88) && (val & 0x7) == ((val >> 4) & 0x7)) { + dev_err(&client->dev, + "duplicate addresses 0x%x, use force_subclient\n", 0x48 + (val & 0x7)); + return -ENODEV; } + if (!(val & 0x08)) + devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + (val & 0x7)); + + if (!(val & 0x80)) + devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + ((val >> 4) & 0x7)); + return 0; } -- cgit From 0f36b88173f028e372668ae040ab1a496834d278 Mon Sep 17 00:00:00 2001 From: Nadezda Lutovinova Date: Tue, 21 Sep 2021 18:51:52 +0300 Subject: hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org Signed-off-by: Nadezda Lutovinova Link: https://lore.kernel.org/r/20210921155153.28098-2-lutovinova@ispras.ru [groeck: Dropped unnecessary continuation lines, fixed multipline alignment] Signed-off-by: Guenter Roeck --- drivers/hwmon/w83792d.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-) diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index abd5c3a722b9..1f175f381350 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -264,9 +264,6 @@ struct w83792d_data { char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ - /* array of 2 pointers to subclients */ - struct i2c_client *lm75[2]; - u8 in[9]; /* Register value */ u8 in_max[9]; /* Register value */ u8 in_min[9]; /* Register value */ @@ -927,7 +924,6 @@ w83792d_detect_subclients(struct i2c_client *new_client) int address = new_client->addr; u8 val; struct i2c_adapter *adapter = new_client->adapter; - struct w83792d_data *data = i2c_get_clientdata(new_client); id = i2c_adapter_id(adapter); if (force_subclients[0] == id && force_subclients[1] == address) { @@ -946,21 +942,19 @@ w83792d_detect_subclients(struct i2c_client *new_client) } val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR); - if (!(val & 0x08)) - data->lm75[0] = devm_i2c_new_dummy_device(&new_client->dev, adapter, - 0x48 + (val & 0x7)); - if (!(val & 0x80)) { - if (!IS_ERR(data->lm75[0]) && - ((val & 0x7) == ((val >> 4) & 0x7))) { - dev_err(&new_client->dev, - "duplicate addresses 0x%x, use force_subclient\n", - data->lm75[0]->addr); - return -ENODEV; - } - data->lm75[1] = devm_i2c_new_dummy_device(&new_client->dev, adapter, - 0x48 + ((val >> 4) & 0x7)); + + if (!(val & 0x88) && (val & 0x7) == ((val >> 4) & 0x7)) { + dev_err(&new_client->dev, + "duplicate addresses 0x%x, use force_subclient\n", 0x48 + (val & 0x7)); + return -ENODEV; } + if (!(val & 0x08)) + devm_i2c_new_dummy_device(&new_client->dev, adapter, 0x48 + (val & 0x7)); + + if (!(val & 0x80)) + devm_i2c_new_dummy_device(&new_client->dev, adapter, 0x48 + ((val >> 4) & 0x7)); + return 0; } -- cgit From dd4d747ef05addab887dc8ff0d6ab9860bbcd783 Mon Sep 17 00:00:00 2001 From: Nadezda Lutovinova Date: Tue, 21 Sep 2021 18:51:53 +0300 Subject: hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field If driver read tmp value sufficient for (tmp & 0x08) && (!(tmp & 0x80)) && ((tmp & 0x7) == ((tmp >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org Signed-off-by: Nadezda Lutovinova Link: https://lore.kernel.org/r/20210921155153.28098-3-lutovinova@ispras.ru [groeck: Dropped unnecessary continuation lines, fixed multi-line alignments] Signed-off-by: Guenter Roeck --- drivers/hwmon/w83793.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index e7d0484eabe4..1d2854de1cfc 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -202,7 +202,6 @@ static inline s8 TEMP_TO_REG(long val, s8 min, s8 max) } struct w83793_data { - struct i2c_client *lm75[2]; struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -1566,7 +1565,6 @@ w83793_detect_subclients(struct i2c_client *client) int address = client->addr; u8 tmp; struct i2c_adapter *adapter = client->adapter; - struct w83793_data *data = i2c_get_clientdata(client); id = i2c_adapter_id(adapter); if (force_subclients[0] == id && force_subclients[1] == address) { @@ -1586,21 +1584,19 @@ w83793_detect_subclients(struct i2c_client *client) } tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR); - if (!(tmp & 0x08)) - data->lm75[0] = devm_i2c_new_dummy_device(&client->dev, adapter, - 0x48 + (tmp & 0x7)); - if (!(tmp & 0x80)) { - if (!IS_ERR(data->lm75[0]) - && ((tmp & 0x7) == ((tmp >> 4) & 0x7))) { - dev_err(&client->dev, - "duplicate addresses 0x%x, " - "use force_subclients\n", data->lm75[0]->addr); - return -ENODEV; - } - data->lm75[1] = devm_i2c_new_dummy_device(&client->dev, adapter, - 0x48 + ((tmp >> 4) & 0x7)); + + if (!(tmp & 0x88) && (tmp & 0x7) == ((tmp >> 4) & 0x7)) { + dev_err(&client->dev, + "duplicate addresses 0x%x, use force_subclient\n", 0x48 + (tmp & 0x7)); + return -ENODEV; } + if (!(tmp & 0x08)) + devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + (tmp & 0x7)); + + if (!(tmp & 0x80)) + devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + ((tmp >> 4) & 0x7)); + return 0; } -- cgit From cdc1e6e225e3256d56dc6648411630e71d7c776b Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sat, 2 Oct 2021 03:17:29 -0700 Subject: drm/i915: fix blank screen booting crashes 5.15-rc1 crashes with blank screen when booting up on two ThinkPads using i915. Bisections converge convincingly, but arrive at different and suprising "culprits", none of them the actual culprit. netconsole (with init_netconsole() hacked to call i915_init() when logging has started, instead of by module_init()) tells the story: kernel BUG at drivers/gpu/drm/i915/i915_sw_fence.c:245! with RSI: ffffffff814d408b pointing to sw_fence_dummy_notify(). I've been building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, and that function needs to be 4-byte aligned. Fixes: 62eaf0ae217d ("drm/i915/guc: Support request cancellation") Signed-off-by: Hugh Dickins Tested-by: Steven Rostedt (VMware) Signed-off-by: Linus Torvalds --- drivers/gpu/drm/i915/gt/intel_context.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_context.c b/drivers/gpu/drm/i915/gt/intel_context.c index 745e84c72c90..e866105dd174 100644 --- a/drivers/gpu/drm/i915/gt/intel_context.c +++ b/drivers/gpu/drm/i915/gt/intel_context.c @@ -362,8 +362,9 @@ static int __intel_context_active(struct i915_active *active) return 0; } -static int sw_fence_dummy_notify(struct i915_sw_fence *sf, - enum i915_sw_fence_notify state) +static int __i915_sw_fence_call +sw_fence_dummy_notify(struct i915_sw_fence *sf, + enum i915_sw_fence_notify state) { return NOTIFY_DONE; } -- cgit From 6e9bfdcf0a3b1c8126878c21adcfc343f89d4a6a Mon Sep 17 00:00:00 2001 From: Dave Wysochanski Date: Fri, 1 Oct 2021 15:37:31 +0100 Subject: cachefiles: Fix oops in trace_cachefiles_mark_buried due to NULL object In cachefiles_mark_object_buried, the dentry in question may not have an owner, and thus our cachefiles_object pointer may be NULL when calling the tracepoint, in which case we will also not have a valid debug_id to print in the tracepoint. Check for NULL object in the tracepoint and if so, just set debug_id to MAX_UINT as was done in 2908f5e101e3 ("fscache: Add a cookie debug ID and use that in traces"). This fixes the following oops: FS-Cache: Cache "mycache" added (type cachefiles) CacheFiles: File cache on vdc registered ... Workqueue: fscache_object fscache_object_work_func [fscache] RIP: 0010:trace_event_raw_event_cachefiles_mark_buried+0x4e/0xa0 [cachefiles] .... Call Trace: cachefiles_mark_object_buried+0xa5/0xb0 [cachefiles] cachefiles_bury_object+0x270/0x430 [cachefiles] cachefiles_walk_to_object+0x195/0x9c0 [cachefiles] cachefiles_lookup_object+0x5a/0xc0 [cachefiles] fscache_look_up_object+0xd7/0x160 [fscache] fscache_object_work_func+0xb2/0x340 [fscache] process_one_work+0x1f1/0x390 worker_thread+0x53/0x3e0 kthread+0x127/0x150 Fixes: 2908f5e101e3 ("fscache: Add a cookie debug ID and use that in traces") Signed-off-by: Dave Wysochanski Signed-off-by: David Howells cc: linux-cachefs@redhat.com Signed-off-by: Linus Torvalds --- include/trace/events/cachefiles.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/trace/events/cachefiles.h b/include/trace/events/cachefiles.h index 9a448fe9355d..695bfdbfdcad 100644 --- a/include/trace/events/cachefiles.h +++ b/include/trace/events/cachefiles.h @@ -305,7 +305,7 @@ TRACE_EVENT(cachefiles_mark_buried, ), TP_fast_assign( - __entry->obj = obj->fscache.debug_id; + __entry->obj = obj ? obj->fscache.debug_id : UINT_MAX; __entry->de = de; __entry->why = why; ), -- cgit From 291073a566b2094c7192872cc0f17ce73d83cb76 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 3 Oct 2021 13:34:19 -0700 Subject: kvm: fix objtool relocation warning The recent change to make objtool aware of more symbol relocation types (commit 24ff65257375: "objtool: Teach get_alt_entry() about more relocation types") also added another check, and resulted in this objtool warning when building kvm on x86: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception The reason seems to be that kvm_fastop_exception() is marked as a global symbol, which causes the relocation to ke kept around for objtool. And at the same time, the kvm_fastop_exception definition (which is done as an inline asm statement) doesn't actually set the type of the global, which then makes objtool unhappy. The minimal fix is to just not mark kvm_fastop_exception as being a global symbol. It's only used in that one compilation unit anyway, so it was always pointless. That's how all the other local exception table labels are done. I'm not entirely happy about the kinds of games that the kvm code plays with doing its own exception handling, and the fact that it confused objtool is most definitely a symptom of the code being a bit too subtle and ad-hoc. But at least this trivial one-liner makes objtool no longer upset about what is going on. Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/ Cc: Borislav Petkov Cc: Paolo Bonzini Cc: Sean Christopherson Cc: Vitaly Kuznetsov Cc: Wanpeng Li Cc: Jim Mattson Cc: Joerg Roedel Cc: Peter Zijlstra Cc: Josh Poimboeuf Cc: Nathan Chancellor Signed-off-by: Linus Torvalds --- arch/x86/kvm/emulate.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index c589ac832265..9a144ca8e146 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -435,7 +435,6 @@ static int fastop(struct x86_emulate_ctxt *ctxt, fastop_t fop); __FOP_RET(#op) asm(".pushsection .fixup, \"ax\"\n" - ".global kvm_fastop_exception \n" "kvm_fastop_exception: xor %esi, %esi; ret\n" ".popsection"); -- cgit From 7fab1c12bde926c5a8c7d5984c551d0854d7e0b3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 3 Oct 2021 13:45:48 -0700 Subject: objtool: print out the symbol type when complaining about it The objtool warning that the kvm instruction emulation code triggered wasn't very useful: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception in that it helpfully tells you which symbol name it had trouble figuring out the relocation for, but it doesn't actually say what the unknown symbol type was that triggered it all. In this case it was because of missing type information (type 0, aka STT_NOTYPE), but on the whole it really should just have printed that out as part of the message. Because if this warning triggers, that's very much the first thing you want to know - why did reloc2sec_off() return failure for that symbol? So rather than just saying you can't handle some type of symbol without saying what the type _was_, just print out the type number too. Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/ Signed-off-by: Linus Torvalds --- tools/objtool/special.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/tools/objtool/special.c b/tools/objtool/special.c index f58ecc50fb10..f1428e32a505 100644 --- a/tools/objtool/special.c +++ b/tools/objtool/special.c @@ -110,8 +110,10 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, return -1; } if (!reloc2sec_off(orig_reloc, &alt->orig_sec, &alt->orig_off)) { - WARN_FUNC("don't know how to handle reloc symbol type: %s", - sec, offset + entry->orig, orig_reloc->sym->name); + WARN_FUNC("don't know how to handle reloc symbol type %d: %s", + sec, offset + entry->orig, + orig_reloc->sym->type, + orig_reloc->sym->name); return -1; } @@ -132,8 +134,10 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, return 1; if (!reloc2sec_off(new_reloc, &alt->new_sec, &alt->new_off)) { - WARN_FUNC("don't know how to handle reloc symbol type: %s", - sec, offset + entry->new, new_reloc->sym->name); + WARN_FUNC("don't know how to handle reloc symbol type %d: %s", + sec, offset + entry->new, + new_reloc->sym->type, + new_reloc->sym->name); return -1; } -- cgit From 9b2f72cc0aa4bb444541bb87581c35b7508b37d3 Mon Sep 17 00:00:00 2001 From: Chen Jingwen Date: Tue, 28 Sep 2021 20:56:57 +0800 Subject: elf: don't use MAP_FIXED_NOREPLACE for elf interpreter mappings In commit b212921b13bd ("elf: don't use MAP_FIXED_NOREPLACE for elf executable mappings") we still leave MAP_FIXED_NOREPLACE in place for load_elf_interp. Unfortunately, this will cause kernel to fail to start with: 1 (init): Uhuuh, elf segment at 00003ffff7ffd000 requested but the memory is mapped already Failed to execute /init (error -17) The reason is that the elf interpreter (ld.so) has overlapping segments. readelf -l ld-2.31.so Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000002c94c 0x000000000002c94c R E 0x10000 LOAD 0x000000000002dae0 0x000000000003dae0 0x000000000003dae0 0x00000000000021e8 0x0000000000002320 RW 0x10000 LOAD 0x000000000002fe00 0x000000000003fe00 0x000000000003fe00 0x00000000000011ac 0x0000000000001328 RW 0x10000 The reason for this problem is the same as described in commit ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments"). Not only executable binaries, elf interpreters (e.g. ld.so) can have overlapping elf segments, so we better drop MAP_FIXED_NOREPLACE and go back to MAP_FIXED in load_elf_interp. Fixes: 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map") Cc: # v4.19 Cc: Andrew Morton Cc: Michal Hocko Signed-off-by: Chen Jingwen Signed-off-by: Linus Torvalds --- fs/binfmt_elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 69d900a8473d..a813b70f594e 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -630,7 +630,7 @@ static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex, vaddr = eppnt->p_vaddr; if (interp_elf_ex->e_type == ET_EXEC || load_addr_set) - elf_type |= MAP_FIXED_NOREPLACE; + elf_type |= MAP_FIXED; else if (no_base && interp_elf_ex->e_type == ET_DYN) load_addr = -vaddr; -- cgit From 9e1ff307c779ce1f0f810c7ecce3d95bbae40896 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 3 Oct 2021 14:08:47 -0700 Subject: Linux 5.15-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 437ccc66a1c2..7b74223d1309 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 15 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Opossums on Parade # *DOCUMENTATION* -- cgit From a78738ed1d9bf40d09109599b884508c69d188b8 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 8 Oct 2021 14:58:34 +0100 Subject: KVM: arm64: Turn __KVM_HOST_SMCCC_FUNC_* into an enum (mostly) __KVM_HOST_SMCCC_FUNC_* is a royal pain, as there is a fair amount of churn around these #defines, and we avoid making it an enum only for the sake of the early init, low level code that requires __KVM_HOST_SMCCC_FUNC___kvm_hyp_init to be usable from assembly. Let's be brave and turn everything but this symbol into an enum, using a bit of arithmetic to avoid any overlap. Acked-by: Will Deacon Link: https://lore.kernel.org/r/877depq9gw.wl-maz@kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon Link: https://lore.kernel.org/r/20211008135839.1193-2-will@kernel.org --- arch/arm64/include/asm/kvm_asm.h | 44 ++++++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 20 deletions(-) diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index e86045ac43ba..43b5e213ae43 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -44,31 +44,35 @@ #define KVM_HOST_SMCCC_FUNC(name) KVM_HOST_SMCCC_ID(__KVM_HOST_SMCCC_FUNC_##name) #define __KVM_HOST_SMCCC_FUNC___kvm_hyp_init 0 -#define __KVM_HOST_SMCCC_FUNC___kvm_vcpu_run 1 -#define __KVM_HOST_SMCCC_FUNC___kvm_flush_vm_context 2 -#define __KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid_ipa 3 -#define __KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid 4 -#define __KVM_HOST_SMCCC_FUNC___kvm_flush_cpu_context 5 -#define __KVM_HOST_SMCCC_FUNC___kvm_timer_set_cntvoff 6 -#define __KVM_HOST_SMCCC_FUNC___kvm_enable_ssbs 7 -#define __KVM_HOST_SMCCC_FUNC___vgic_v3_get_gic_config 8 -#define __KVM_HOST_SMCCC_FUNC___vgic_v3_read_vmcr 9 -#define __KVM_HOST_SMCCC_FUNC___vgic_v3_write_vmcr 10 -#define __KVM_HOST_SMCCC_FUNC___vgic_v3_init_lrs 11 -#define __KVM_HOST_SMCCC_FUNC___kvm_get_mdcr_el2 12 -#define __KVM_HOST_SMCCC_FUNC___vgic_v3_save_aprs 13 -#define __KVM_HOST_SMCCC_FUNC___vgic_v3_restore_aprs 14 -#define __KVM_HOST_SMCCC_FUNC___pkvm_init 15 -#define __KVM_HOST_SMCCC_FUNC___pkvm_host_share_hyp 16 -#define __KVM_HOST_SMCCC_FUNC___pkvm_create_private_mapping 17 -#define __KVM_HOST_SMCCC_FUNC___pkvm_cpu_set_vector 18 -#define __KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize 19 -#define __KVM_HOST_SMCCC_FUNC___kvm_adjust_pc 20 #ifndef __ASSEMBLY__ #include +enum __kvm_host_smccc_func { + /* __KVM_HOST_SMCCC_FUNC___kvm_hyp_init */ + __KVM_HOST_SMCCC_FUNC___kvm_vcpu_run = __KVM_HOST_SMCCC_FUNC___kvm_hyp_init + 1, + __KVM_HOST_SMCCC_FUNC___kvm_flush_vm_context, + __KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid_ipa, + __KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid, + __KVM_HOST_SMCCC_FUNC___kvm_flush_cpu_context, + __KVM_HOST_SMCCC_FUNC___kvm_timer_set_cntvoff, + __KVM_HOST_SMCCC_FUNC___kvm_enable_ssbs, + __KVM_HOST_SMCCC_FUNC___vgic_v3_get_gic_config, + __KVM_HOST_SMCCC_FUNC___vgic_v3_read_vmcr, + __KVM_HOST_SMCCC_FUNC___vgic_v3_write_vmcr, + __KVM_HOST_SMCCC_FUNC___vgic_v3_init_lrs, + __KVM_HOST_SMCCC_FUNC___kvm_get_mdcr_el2, + __KVM_HOST_SMCCC_FUNC___vgic_v3_save_aprs, + __KVM_HOST_SMCCC_FUNC___vgic_v3_restore_aprs, + __KVM_HOST_SMCCC_FUNC___pkvm_init, + __KVM_HOST_SMCCC_FUNC___pkvm_host_share_hyp, + __KVM_HOST_SMCCC_FUNC___pkvm_create_private_mapping, + __KVM_HOST_SMCCC_FUNC___pkvm_cpu_set_vector, + __KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize, + __KVM_HOST_SMCCC_FUNC___kvm_adjust_pc, +}; + #define DECLARE_KVM_VHE_SYM(sym) extern char sym[] #define DECLARE_KVM_NVHE_SYM(sym) extern char kvm_nvhe_sym(sym)[] -- cgit From 8f4566f18db5d1257fc2d5442e16274424a529c1 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 8 Oct 2021 14:58:35 +0100 Subject: arm64: Prevent kexec and hibernation if is_protected_kvm_enabled() When pKVM is enabled, the hypervisor code at EL2 and its data structures are inaccessible to the host kernel and cannot be torn down or replaced as this would defeat the integrity properies which pKVM aims to provide. Furthermore, the ABI between the host and EL2 is flexible and private to whatever the current implementation of KVM requires and so booting a new kernel with an old EL2 component is very likely to end in disaster. In preparation for uninstalling the hyp stub calls which are relied upon to reset EL2, disable kexec and hibernation in the host when protected KVM is enabled. Cc: Marc Zyngier Cc: Quentin Perret Signed-off-by: Will Deacon Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211008135839.1193-3-will@kernel.org --- arch/arm64/kernel/smp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 6f6ff072acbd..44369b99a57e 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -1128,5 +1128,6 @@ bool cpus_are_stuck_in_kernel(void) { bool smp_spin_tables = (num_possible_cpus() > 1 && !have_cpu_die()); - return !!cpus_stuck_in_kernel || smp_spin_tables; + return !!cpus_stuck_in_kernel || smp_spin_tables || + is_protected_kvm_enabled(); } -- cgit From 8579a185bacaa64c65e43e251ceede2f7600f7e2 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 8 Oct 2021 14:58:36 +0100 Subject: KVM: arm64: Reject stub hypercalls after pKVM has been initialised The stub hypercalls provide mechanisms to reset and replace the EL2 code, so uninstall them once pKVM has been initialised in order to ensure the integrity of the hypervisor code. To ensure pKVM initialisation remains functional, split cpu_hyp_reinit() into two helper functions to separate usage of the stub from usage of pkvm hypercalls either side of __pkvm_init on the boot CPU. Cc: Marc Zyngier Cc: Quentin Perret Signed-off-by: Will Deacon Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211008135839.1193-4-will@kernel.org --- arch/arm64/kvm/arm.c | 31 +++++++++++++++++++++++-------- arch/arm64/kvm/hyp/nvhe/host.S | 26 +++++++++++++++++--------- 2 files changed, 40 insertions(+), 17 deletions(-) diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index fe102cd2e518..9506cf88fa0e 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -1579,25 +1579,33 @@ static void cpu_set_hyp_vector(void) kvm_call_hyp_nvhe(__pkvm_cpu_set_vector, data->slot); } -static void cpu_hyp_reinit(void) +static void cpu_hyp_init_context(void) { kvm_init_host_cpu_context(&this_cpu_ptr_hyp_sym(kvm_host_data)->host_ctxt); - cpu_hyp_reset(); - - if (is_kernel_in_hyp_mode()) - kvm_timer_init_vhe(); - else + if (!is_kernel_in_hyp_mode()) cpu_init_hyp_mode(); +} +static void cpu_hyp_init_features(void) +{ cpu_set_hyp_vector(); - kvm_arm_init_debug(); + if (is_kernel_in_hyp_mode()) + kvm_timer_init_vhe(); + if (vgic_present) kvm_vgic_init_cpu_hardware(); } +static void cpu_hyp_reinit(void) +{ + cpu_hyp_reset(); + cpu_hyp_init_context(); + cpu_hyp_init_features(); +} + static void _kvm_arch_hardware_enable(void *discard) { if (!__this_cpu_read(kvm_arm_hardware_enabled)) { @@ -1788,10 +1796,17 @@ static int do_pkvm_init(u32 hyp_va_bits) int ret; preempt_disable(); - hyp_install_host_vector(); + cpu_hyp_init_context(); ret = kvm_call_hyp_nvhe(__pkvm_init, hyp_mem_base, hyp_mem_size, num_possible_cpus(), kern_hyp_va(per_cpu_base), hyp_va_bits); + cpu_hyp_init_features(); + + /* + * The stub hypercalls are now disabled, so set our local flag to + * prevent a later re-init attempt in kvm_arch_hardware_enable(). + */ + __this_cpu_write(kvm_arm_hardware_enabled, 1); preempt_enable(); return ret; diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S index 4b652ffb591d..0c6116d34e18 100644 --- a/arch/arm64/kvm/hyp/nvhe/host.S +++ b/arch/arm64/kvm/hyp/nvhe/host.S @@ -110,17 +110,14 @@ SYM_FUNC_START(__hyp_do_panic) b __host_enter_for_panic SYM_FUNC_END(__hyp_do_panic) -.macro host_el1_sync_vect - .align 7 -.L__vect_start\@: - stp x0, x1, [sp, #-16]! - mrs x0, esr_el2 - lsr x0, x0, #ESR_ELx_EC_SHIFT - cmp x0, #ESR_ELx_EC_HVC64 - b.ne __host_exit - +SYM_FUNC_START(__host_hvc) ldp x0, x1, [sp] // Don't fixup the stack yet + /* No stub for you, sonny Jim */ +alternative_if ARM64_KVM_PROTECTED_MODE + b __host_exit +alternative_else_nop_endif + /* Check for a stub HVC call */ cmp x0, #HVC_STUB_HCALL_NR b.hs __host_exit @@ -137,6 +134,17 @@ SYM_FUNC_END(__hyp_do_panic) ldr x5, =__kvm_handle_stub_hvc hyp_pa x5, x6 br x5 +SYM_FUNC_END(__host_hvc) + +.macro host_el1_sync_vect + .align 7 +.L__vect_start\@: + stp x0, x1, [sp, #-16]! + mrs x0, esr_el2 + lsr x0, x0, #ESR_ELx_EC_SHIFT + cmp x0, #ESR_ELx_EC_HVC64 + b.eq __host_hvc + b __host_exit .L__vect_end\@: .if ((.L__vect_end\@ - .L__vect_start\@) > 0x80) .error "host_el1_sync_vect larger than vector entry" -- cgit From 2f2e1a5069679491d18cf9021da19b40c56a17f3 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 8 Oct 2021 14:58:37 +0100 Subject: KVM: arm64: Propagate errors from __pkvm_prot_finalize hypercall If the __pkvm_prot_finalize hypercall returns an error, we WARN but fail to propagate the failure code back to kvm_arch_init(). Pass a pointer to a zero-initialised return variable so that failure to finalise the pKVM protections on a host CPU can be reported back to KVM. Cc: Marc Zyngier Cc: Quentin Perret Signed-off-by: Will Deacon Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211008135839.1193-5-will@kernel.org --- arch/arm64/kvm/arm.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 9506cf88fa0e..13bbf35896cd 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -1986,9 +1986,25 @@ out_err: return err; } -static void _kvm_host_prot_finalize(void *discard) +static void _kvm_host_prot_finalize(void *arg) { - WARN_ON(kvm_call_hyp_nvhe(__pkvm_prot_finalize)); + int *err = arg; + + if (WARN_ON(kvm_call_hyp_nvhe(__pkvm_prot_finalize))) + WRITE_ONCE(*err, -EINVAL); +} + +static int pkvm_drop_host_privileges(void) +{ + int ret = 0; + + /* + * Flip the static key upfront as that may no longer be possible + * once the host stage 2 is installed. + */ + static_branch_enable(&kvm_protected_mode_initialized); + on_each_cpu(_kvm_host_prot_finalize, &ret, 1); + return ret; } static int finalize_hyp_mode(void) @@ -2002,15 +2018,7 @@ static int finalize_hyp_mode(void) * None of other sections should ever be introspected. */ kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start); - - /* - * Flip the static key upfront as that may no longer be possible - * once the host stage 2 is installed. - */ - static_branch_enable(&kvm_protected_mode_initialized); - on_each_cpu(_kvm_host_prot_finalize, NULL, 1); - - return 0; + return pkvm_drop_host_privileges(); } struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr) -- cgit From 07036cffe17ec07e8fb630d86f8ea21832d9e57d Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 8 Oct 2021 14:58:38 +0100 Subject: KVM: arm64: Prevent re-finalisation of pKVM for a given CPU __pkvm_prot_finalize() completes the deprivilege of the host when pKVM is in use by installing a stage-2 translation table for the calling CPU. Issuing the hypercall multiple times for a given CPU makes little sense, but in such a case just return early with -EPERM rather than go through the whole page-table dance again. Cc: Marc Zyngier Cc: Quentin Perret Signed-off-by: Will Deacon Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211008135839.1193-6-will@kernel.org --- arch/arm64/kvm/hyp/nvhe/mem_protect.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c index bacd493a4eac..cafe17e5fa8f 100644 --- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c +++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c @@ -123,6 +123,9 @@ int __pkvm_prot_finalize(void) struct kvm_s2_mmu *mmu = &host_kvm.arch.mmu; struct kvm_nvhe_init_params *params = this_cpu_ptr(&kvm_init_params); + if (params->hcr_el2 & HCR_VM) + return -EPERM; + params->vttbr = kvm_get_vttbr(mmu); params->vtcr = host_kvm.arch.vtcr; params->hcr_el2 |= HCR_VM; -- cgit From 057bed206f70d624c2eacb43ec56551950a26832 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 8 Oct 2021 14:58:39 +0100 Subject: KVM: arm64: Disable privileged hypercalls after pKVM finalisation After pKVM has been 'finalised' using the __pkvm_prot_finalize hypercall, the calling CPU will have a Stage-2 translation enabled to prevent access to memory pages owned by EL2. Although this forms a significant part of the process to deprivilege the host kernel, we also need to ensure that the hypercall interface is reduced so that the EL2 code cannot, for example, be re-initialised using a new set of vectors. Re-order the hypercalls so that only a suffix remains available after finalisation of pKVM. Cc: Marc Zyngier Cc: Quentin Perret Signed-off-by: Will Deacon Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211008135839.1193-7-will@kernel.org --- arch/arm64/include/asm/kvm_asm.h | 25 ++++++++++++++----------- arch/arm64/kvm/hyp/nvhe/hyp-main.c | 37 ++++++++++++++++++++++++++----------- 2 files changed, 40 insertions(+), 22 deletions(-) diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index 43b5e213ae43..4654d27fd221 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -50,27 +50,30 @@ #include enum __kvm_host_smccc_func { + /* Hypercalls available only prior to pKVM finalisation */ /* __KVM_HOST_SMCCC_FUNC___kvm_hyp_init */ - __KVM_HOST_SMCCC_FUNC___kvm_vcpu_run = __KVM_HOST_SMCCC_FUNC___kvm_hyp_init + 1, + __KVM_HOST_SMCCC_FUNC___kvm_get_mdcr_el2 = __KVM_HOST_SMCCC_FUNC___kvm_hyp_init + 1, + __KVM_HOST_SMCCC_FUNC___pkvm_init, + __KVM_HOST_SMCCC_FUNC___pkvm_create_private_mapping, + __KVM_HOST_SMCCC_FUNC___pkvm_cpu_set_vector, + __KVM_HOST_SMCCC_FUNC___kvm_enable_ssbs, + __KVM_HOST_SMCCC_FUNC___vgic_v3_init_lrs, + __KVM_HOST_SMCCC_FUNC___vgic_v3_get_gic_config, + __KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize, + + /* Hypercalls available after pKVM finalisation */ + __KVM_HOST_SMCCC_FUNC___pkvm_host_share_hyp, + __KVM_HOST_SMCCC_FUNC___kvm_adjust_pc, + __KVM_HOST_SMCCC_FUNC___kvm_vcpu_run, __KVM_HOST_SMCCC_FUNC___kvm_flush_vm_context, __KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid_ipa, __KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid, __KVM_HOST_SMCCC_FUNC___kvm_flush_cpu_context, __KVM_HOST_SMCCC_FUNC___kvm_timer_set_cntvoff, - __KVM_HOST_SMCCC_FUNC___kvm_enable_ssbs, - __KVM_HOST_SMCCC_FUNC___vgic_v3_get_gic_config, __KVM_HOST_SMCCC_FUNC___vgic_v3_read_vmcr, __KVM_HOST_SMCCC_FUNC___vgic_v3_write_vmcr, - __KVM_HOST_SMCCC_FUNC___vgic_v3_init_lrs, - __KVM_HOST_SMCCC_FUNC___kvm_get_mdcr_el2, __KVM_HOST_SMCCC_FUNC___vgic_v3_save_aprs, __KVM_HOST_SMCCC_FUNC___vgic_v3_restore_aprs, - __KVM_HOST_SMCCC_FUNC___pkvm_init, - __KVM_HOST_SMCCC_FUNC___pkvm_host_share_hyp, - __KVM_HOST_SMCCC_FUNC___pkvm_create_private_mapping, - __KVM_HOST_SMCCC_FUNC___pkvm_cpu_set_vector, - __KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize, - __KVM_HOST_SMCCC_FUNC___kvm_adjust_pc, }; #define DECLARE_KVM_VHE_SYM(sym) extern char sym[] diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c index 2da6aa8da868..8566805ef62c 100644 --- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c +++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c @@ -165,36 +165,51 @@ typedef void (*hcall_t)(struct kvm_cpu_context *); #define HANDLE_FUNC(x) [__KVM_HOST_SMCCC_FUNC_##x] = (hcall_t)handle_##x static const hcall_t host_hcall[] = { - HANDLE_FUNC(__kvm_vcpu_run), + /* ___kvm_hyp_init */ + HANDLE_FUNC(__kvm_get_mdcr_el2), + HANDLE_FUNC(__pkvm_init), + HANDLE_FUNC(__pkvm_create_private_mapping), + HANDLE_FUNC(__pkvm_cpu_set_vector), + HANDLE_FUNC(__kvm_enable_ssbs), + HANDLE_FUNC(__vgic_v3_init_lrs), + HANDLE_FUNC(__vgic_v3_get_gic_config), + HANDLE_FUNC(__pkvm_prot_finalize), + + HANDLE_FUNC(__pkvm_host_share_hyp), HANDLE_FUNC(__kvm_adjust_pc), + HANDLE_FUNC(__kvm_vcpu_run), HANDLE_FUNC(__kvm_flush_vm_context), HANDLE_FUNC(__kvm_tlb_flush_vmid_ipa), HANDLE_FUNC(__kvm_tlb_flush_vmid), HANDLE_FUNC(__kvm_flush_cpu_context), HANDLE_FUNC(__kvm_timer_set_cntvoff), - HANDLE_FUNC(__kvm_enable_ssbs), - HANDLE_FUNC(__vgic_v3_get_gic_config), HANDLE_FUNC(__vgic_v3_read_vmcr), HANDLE_FUNC(__vgic_v3_write_vmcr), - HANDLE_FUNC(__vgic_v3_init_lrs), - HANDLE_FUNC(__kvm_get_mdcr_el2), HANDLE_FUNC(__vgic_v3_save_aprs), HANDLE_FUNC(__vgic_v3_restore_aprs), - HANDLE_FUNC(__pkvm_init), - HANDLE_FUNC(__pkvm_cpu_set_vector), - HANDLE_FUNC(__pkvm_host_share_hyp), - HANDLE_FUNC(__pkvm_create_private_mapping), - HANDLE_FUNC(__pkvm_prot_finalize), }; static void handle_host_hcall(struct kvm_cpu_context *host_ctxt) { DECLARE_REG(unsigned long, id, host_ctxt, 0); + unsigned long hcall_min = 0; hcall_t hfn; + /* + * If pKVM has been initialised then reject any calls to the + * early "privileged" hypercalls. Note that we cannot reject + * calls to __pkvm_prot_finalize for two reasons: (1) The static + * key used to determine initialisation must be toggled prior to + * finalisation and (2) finalisation is performed on a per-CPU + * basis. This is all fine, however, since __pkvm_prot_finalize + * returns -EPERM after the first call for a given CPU. + */ + if (static_branch_unlikely(&kvm_protected_mode_initialized)) + hcall_min = __KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize; + id -= KVM_HOST_SMCCC_ID(0); - if (unlikely(id >= ARRAY_SIZE(host_hcall))) + if (unlikely(id < hcall_min || id >= ARRAY_SIZE(host_hcall))) goto inval; hfn = host_hcall[id]; -- cgit From f25c5e4dafd859b941a4654cbab9eb83ff994bcd Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Mon, 4 Oct 2021 18:19:11 -0700 Subject: kvm: arm64: vgic: Introduce vgic_check_iorange Add the new vgic_check_iorange helper that checks that an iorange is sane: the start address and size have valid alignments, the range is within the addressable PA range, start+size doesn't overflow, and the start wasn't already defined. No functional change. Reviewed-by: Eric Auger Signed-off-by: Ricardo Koller Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005011921.437353-2-ricarkol@google.com --- arch/arm64/kvm/vgic/vgic-kvm-device.c | 22 ++++++++++++++++++++++ arch/arm64/kvm/vgic/vgic.h | 4 ++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm64/kvm/vgic/vgic-kvm-device.c b/arch/arm64/kvm/vgic/vgic-kvm-device.c index 7740995de982..cc0ad227b380 100644 --- a/arch/arm64/kvm/vgic/vgic-kvm-device.c +++ b/arch/arm64/kvm/vgic/vgic-kvm-device.c @@ -29,6 +29,28 @@ int vgic_check_ioaddr(struct kvm *kvm, phys_addr_t *ioaddr, return 0; } +int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr, + phys_addr_t addr, phys_addr_t alignment, + phys_addr_t size) +{ + int ret; + + ret = vgic_check_ioaddr(kvm, &ioaddr, addr, alignment); + if (ret) + return ret; + + if (!IS_ALIGNED(size, alignment)) + return -EINVAL; + + if (addr + size < addr) + return -EINVAL; + + if (addr + size > kvm_phys_size(kvm)) + return -E2BIG; + + return 0; +} + static int vgic_check_type(struct kvm *kvm, int type_needed) { if (kvm->arch.vgic.vgic_model != type_needed) diff --git a/arch/arm64/kvm/vgic/vgic.h b/arch/arm64/kvm/vgic/vgic.h index 14a9218641f5..4be01c38e8f1 100644 --- a/arch/arm64/kvm/vgic/vgic.h +++ b/arch/arm64/kvm/vgic/vgic.h @@ -175,6 +175,10 @@ void vgic_irq_handle_resampling(struct vgic_irq *irq, int vgic_check_ioaddr(struct kvm *kvm, phys_addr_t *ioaddr, phys_addr_t addr, phys_addr_t alignment); +int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr, + phys_addr_t addr, phys_addr_t alignment, + phys_addr_t size); + void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu); void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr); void vgic_v2_clear_lr(struct kvm_vcpu *vcpu, int lr); -- cgit From 4612d98f58c73ad63928200fd332f75c8e524dae Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Mon, 4 Oct 2021 18:19:12 -0700 Subject: KVM: arm64: vgic-v3: Check redist region is not above the VM IPA size Verify that the redistributor regions do not extend beyond the VM-specified IPA range (phys_size). This can happen when using KVM_VGIC_V3_ADDR_TYPE_REDIST or KVM_VGIC_V3_ADDR_TYPE_REDIST_REGIONS with: base + size > phys_size AND base < phys_size Add the missing check into vgic_v3_alloc_redist_region() which is called when setting the regions, and into vgic_v3_check_base() which is called when attempting the first vcpu-run. The vcpu-run check does not apply to KVM_VGIC_V3_ADDR_TYPE_REDIST_REGIONS because the regions size is known before the first vcpu-run. Note that using the REDIST_REGIONS API results in a different check, which already exists, at first vcpu run: that the number of redist regions is enough for all vcpus. Finally, this patch also enables some extra tests in vgic_v3_alloc_redist_region() by calculating "size" early for the legacy redist api: like checking that the REDIST region can fit all the already created vcpus. Reviewed-by: Eric Auger Signed-off-by: Ricardo Koller Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005011921.437353-3-ricarkol@google.com --- arch/arm64/kvm/vgic/vgic-mmio-v3.c | 6 ++++-- arch/arm64/kvm/vgic/vgic-v3.c | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c index a09cdc0b953c..a9642fc71fdf 100644 --- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c +++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c @@ -796,7 +796,9 @@ static int vgic_v3_alloc_redist_region(struct kvm *kvm, uint32_t index, struct vgic_dist *d = &kvm->arch.vgic; struct vgic_redist_region *rdreg; struct list_head *rd_regions = &d->rd_regions; - size_t size = count * KVM_VGIC_V3_REDIST_SIZE; + int nr_vcpus = atomic_read(&kvm->online_vcpus); + size_t size = count ? count * KVM_VGIC_V3_REDIST_SIZE + : nr_vcpus * KVM_VGIC_V3_REDIST_SIZE; int ret; /* cross the end of memory ? */ @@ -840,7 +842,7 @@ static int vgic_v3_alloc_redist_region(struct kvm *kvm, uint32_t index, rdreg->base = VGIC_ADDR_UNDEF; - ret = vgic_check_ioaddr(kvm, &rdreg->base, base, SZ_64K); + ret = vgic_check_iorange(kvm, rdreg->base, base, SZ_64K, size); if (ret) goto free; diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c index 21a6207fb2ee..960f51a8691f 100644 --- a/arch/arm64/kvm/vgic/vgic-v3.c +++ b/arch/arm64/kvm/vgic/vgic-v3.c @@ -483,8 +483,10 @@ bool vgic_v3_check_base(struct kvm *kvm) return false; list_for_each_entry(rdreg, &d->rd_regions, list) { - if (rdreg->base + vgic_v3_rd_region_size(kvm, rdreg) < - rdreg->base) + size_t sz = vgic_v3_rd_region_size(kvm, rdreg); + + if (vgic_check_iorange(kvm, VGIC_ADDR_UNDEF, + rdreg->base, SZ_64K, sz)) return false; } -- cgit From c56a87da0a7fa14180082249ac954c7ebc9e74e1 Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Mon, 4 Oct 2021 18:19:13 -0700 Subject: KVM: arm64: vgic-v2: Check cpu interface region is not above the VM IPA size Verify that the GICv2 CPU interface does not extend beyond the VM-specified IPA range (phys_size). base + size > phys_size AND base < phys_size Add the missing check into kvm_vgic_addr() which is called when setting the region. This patch also enables some superfluous checks for the distributor (vgic_check_ioaddr was enough as alignment == size for the distributors). Reviewed-by: Eric Auger Signed-off-by: Ricardo Koller Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005011921.437353-4-ricarkol@google.com --- arch/arm64/kvm/vgic/vgic-kvm-device.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kvm/vgic/vgic-kvm-device.c b/arch/arm64/kvm/vgic/vgic-kvm-device.c index cc0ad227b380..08ae34b1a986 100644 --- a/arch/arm64/kvm/vgic/vgic-kvm-device.c +++ b/arch/arm64/kvm/vgic/vgic-kvm-device.c @@ -79,7 +79,7 @@ int kvm_vgic_addr(struct kvm *kvm, unsigned long type, u64 *addr, bool write) { int r = 0; struct vgic_dist *vgic = &kvm->arch.vgic; - phys_addr_t *addr_ptr, alignment; + phys_addr_t *addr_ptr, alignment, size; u64 undef_value = VGIC_ADDR_UNDEF; mutex_lock(&kvm->lock); @@ -88,16 +88,19 @@ int kvm_vgic_addr(struct kvm *kvm, unsigned long type, u64 *addr, bool write) r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V2); addr_ptr = &vgic->vgic_dist_base; alignment = SZ_4K; + size = KVM_VGIC_V2_DIST_SIZE; break; case KVM_VGIC_V2_ADDR_TYPE_CPU: r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V2); addr_ptr = &vgic->vgic_cpu_base; alignment = SZ_4K; + size = KVM_VGIC_V2_CPU_SIZE; break; case KVM_VGIC_V3_ADDR_TYPE_DIST: r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V3); addr_ptr = &vgic->vgic_dist_base; alignment = SZ_64K; + size = KVM_VGIC_V3_DIST_SIZE; break; case KVM_VGIC_V3_ADDR_TYPE_REDIST: { struct vgic_redist_region *rdreg; @@ -162,7 +165,7 @@ int kvm_vgic_addr(struct kvm *kvm, unsigned long type, u64 *addr, bool write) goto out; if (write) { - r = vgic_check_ioaddr(kvm, addr_ptr, *addr, alignment); + r = vgic_check_iorange(kvm, *addr_ptr, *addr, alignment, size); if (!r) *addr_ptr = *addr; } else { -- cgit From 2ec02f6c64f043a249850c835ca7975c3a155d8b Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Mon, 4 Oct 2021 18:19:14 -0700 Subject: KVM: arm64: vgic-v3: Check ITS region is not above the VM IPA size Verify that the ITS region does not extend beyond the VM-specified IPA range (phys_size). base + size > phys_size AND base < phys_size Add the missing check into vgic_its_set_attr() which is called when setting the region. Reviewed-by: Eric Auger Signed-off-by: Ricardo Koller Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005011921.437353-5-ricarkol@google.com --- arch/arm64/kvm/vgic/vgic-its.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c index 61728c543eb9..ad55bb8cd30f 100644 --- a/arch/arm64/kvm/vgic/vgic-its.c +++ b/arch/arm64/kvm/vgic/vgic-its.c @@ -2710,8 +2710,8 @@ static int vgic_its_set_attr(struct kvm_device *dev, if (copy_from_user(&addr, uaddr, sizeof(addr))) return -EFAULT; - ret = vgic_check_ioaddr(dev->kvm, &its->vgic_its_base, - addr, SZ_64K); + ret = vgic_check_iorange(dev->kvm, its->vgic_its_base, + addr, SZ_64K, KVM_VGIC_V3_ITS_SIZE); if (ret) return ret; -- cgit From 96e903896969679104c7fef2c776ed1b5b09584f Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Mon, 4 Oct 2021 18:19:15 -0700 Subject: KVM: arm64: vgic: Drop vgic_check_ioaddr() There are no more users of vgic_check_ioaddr(). Move its checks to vgic_check_iorange() and then remove it. Signed-off-by: Ricardo Koller Reviewed-by: Eric Auger Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005011921.437353-6-ricarkol@google.com --- arch/arm64/kvm/vgic/vgic-kvm-device.c | 26 ++++---------------------- arch/arm64/kvm/vgic/vgic.h | 3 --- 2 files changed, 4 insertions(+), 25 deletions(-) diff --git a/arch/arm64/kvm/vgic/vgic-kvm-device.c b/arch/arm64/kvm/vgic/vgic-kvm-device.c index 08ae34b1a986..0d000d2fe8d2 100644 --- a/arch/arm64/kvm/vgic/vgic-kvm-device.c +++ b/arch/arm64/kvm/vgic/vgic-kvm-device.c @@ -14,38 +14,20 @@ /* common helpers */ -int vgic_check_ioaddr(struct kvm *kvm, phys_addr_t *ioaddr, - phys_addr_t addr, phys_addr_t alignment) -{ - if (addr & ~kvm_phys_mask(kvm)) - return -E2BIG; - - if (!IS_ALIGNED(addr, alignment)) - return -EINVAL; - - if (!IS_VGIC_ADDR_UNDEF(*ioaddr)) - return -EEXIST; - - return 0; -} - int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr, phys_addr_t addr, phys_addr_t alignment, phys_addr_t size) { - int ret; - - ret = vgic_check_ioaddr(kvm, &ioaddr, addr, alignment); - if (ret) - return ret; + if (!IS_VGIC_ADDR_UNDEF(ioaddr)) + return -EEXIST; - if (!IS_ALIGNED(size, alignment)) + if (!IS_ALIGNED(addr, alignment) || !IS_ALIGNED(size, alignment)) return -EINVAL; if (addr + size < addr) return -EINVAL; - if (addr + size > kvm_phys_size(kvm)) + if (addr & ~kvm_phys_mask(kvm) || addr + size > kvm_phys_size(kvm)) return -E2BIG; return 0; diff --git a/arch/arm64/kvm/vgic/vgic.h b/arch/arm64/kvm/vgic/vgic.h index 4be01c38e8f1..3fd6c86a7ef3 100644 --- a/arch/arm64/kvm/vgic/vgic.h +++ b/arch/arm64/kvm/vgic/vgic.h @@ -172,9 +172,6 @@ void vgic_kick_vcpus(struct kvm *kvm); void vgic_irq_handle_resampling(struct vgic_irq *irq, bool lr_deactivated, bool lr_pending); -int vgic_check_ioaddr(struct kvm *kvm, phys_addr_t *ioaddr, - phys_addr_t addr, phys_addr_t alignment); - int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr, phys_addr_t addr, phys_addr_t alignment, phys_addr_t size); -- cgit From 3f4db37e203b0562d9ebae575af13ea159fbd077 Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Mon, 4 Oct 2021 18:19:16 -0700 Subject: KVM: arm64: selftests: Make vgic_init gic version agnostic As a preparation for the next commits which will add some tests for GICv2, make aarch64/vgic_init GIC version agnostic. Add a new generic run_tests function(gic_dev_type) that starts all applicable tests using GICv3 or GICv2. GICv2 tests are attempted if GICv3 is not available in the system. There are currently no GICv2 tests, but the test passes now in GICv2 systems. Reviewed-by: Eric Auger Signed-off-by: Ricardo Koller Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005011921.437353-7-ricarkol@google.com --- tools/testing/selftests/kvm/aarch64/vgic_init.c | 156 +++++++++++++++--------- 1 file changed, 95 insertions(+), 61 deletions(-) diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c index 623f31a14326..896a29f2503d 100644 --- a/tools/testing/selftests/kvm/aarch64/vgic_init.c +++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c @@ -22,6 +22,9 @@ #define GICR_TYPER 0x8 +#define VGIC_DEV_IS_V2(_d) ((_d) == KVM_DEV_TYPE_ARM_VGIC_V2) +#define VGIC_DEV_IS_V3(_d) ((_d) == KVM_DEV_TYPE_ARM_VGIC_V3) + struct vm_gic { struct kvm_vm *vm; int gic_fd; @@ -30,8 +33,8 @@ struct vm_gic { static int max_ipa_bits; /* helper to access a redistributor register */ -static int access_redist_reg(int gicv3_fd, int vcpu, int offset, - uint32_t *val, bool write) +static int access_v3_redist_reg(int gicv3_fd, int vcpu, int offset, + uint32_t *val, bool write) { uint64_t attr = REG_OFFSET(vcpu, offset); @@ -58,7 +61,7 @@ static int run_vcpu(struct kvm_vm *vm, uint32_t vcpuid) return 0; } -static struct vm_gic vm_gic_create(void) +static struct vm_gic vm_gic_v3_create(void) { struct vm_gic v; @@ -80,7 +83,7 @@ static void vm_gic_destroy(struct vm_gic *v) * device gets created, a legacy RDIST region is set at @0x0 * and a DIST region is set @0x60000 */ -static void subtest_dist_rdist(struct vm_gic *v) +static void subtest_v3_dist_rdist(struct vm_gic *v) { int ret; uint64_t addr; @@ -145,7 +148,7 @@ static void subtest_dist_rdist(struct vm_gic *v) } /* Test the new REDIST region API */ -static void subtest_redist_regions(struct vm_gic *v) +static void subtest_v3_redist_regions(struct vm_gic *v) { uint64_t addr, expected_addr; int ret; @@ -249,7 +252,7 @@ static void subtest_redist_regions(struct vm_gic *v) * VGIC KVM device is created and initialized before the secondary CPUs * get created */ -static void test_vgic_then_vcpus(void) +static void test_v3_vgic_then_vcpus(uint32_t gic_dev_type) { struct vm_gic v; int ret, i; @@ -257,7 +260,7 @@ static void test_vgic_then_vcpus(void) v.vm = vm_create_default(0, 0, guest_code); v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); - subtest_dist_rdist(&v); + subtest_v3_dist_rdist(&v); /* Add the rest of the VCPUs */ for (i = 1; i < NR_VCPUS; ++i) @@ -270,14 +273,14 @@ static void test_vgic_then_vcpus(void) } /* All the VCPUs are created before the VGIC KVM device gets initialized */ -static void test_vcpus_then_vgic(void) +static void test_v3_vcpus_then_vgic(uint32_t gic_dev_type) { struct vm_gic v; int ret; - v = vm_gic_create(); + v = vm_gic_v3_create(); - subtest_dist_rdist(&v); + subtest_v3_dist_rdist(&v); ret = run_vcpu(v.vm, 3); TEST_ASSERT(ret == -EINVAL, "dist/rdist overlap detected on 1st vcpu run"); @@ -285,15 +288,15 @@ static void test_vcpus_then_vgic(void) vm_gic_destroy(&v); } -static void test_new_redist_regions(void) +static void test_v3_new_redist_regions(void) { void *dummy = NULL; struct vm_gic v; uint64_t addr; int ret; - v = vm_gic_create(); - subtest_redist_regions(&v); + v = vm_gic_v3_create(); + subtest_v3_redist_regions(&v); kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true); @@ -303,8 +306,8 @@ static void test_new_redist_regions(void) /* step2 */ - v = vm_gic_create(); - subtest_redist_regions(&v); + v = vm_gic_v3_create(); + subtest_v3_redist_regions(&v); addr = REDIST_REGION_ATTR_ADDR(1, 0x280000, 0, 2); kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, @@ -317,8 +320,8 @@ static void test_new_redist_regions(void) /* step 3 */ - v = vm_gic_create(); - subtest_redist_regions(&v); + v = vm_gic_v3_create(); + subtest_v3_redist_regions(&v); _kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, dummy, true); @@ -338,7 +341,7 @@ static void test_new_redist_regions(void) vm_gic_destroy(&v); } -static void test_typer_accesses(void) +static void test_v3_typer_accesses(void) { struct vm_gic v; uint64_t addr; @@ -351,12 +354,12 @@ static void test_typer_accesses(void) vm_vcpu_add_default(v.vm, 3, guest_code); - ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); TEST_ASSERT(ret && errno == EINVAL, "attempting to read GICR_TYPER of non created vcpu"); vm_vcpu_add_default(v.vm, 1, guest_code); - ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); TEST_ASSERT(ret && errno == EBUSY, "read GICR_TYPER before GIC initialized"); vm_vcpu_add_default(v.vm, 2, guest_code); @@ -365,7 +368,7 @@ static void test_typer_accesses(void) KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true); for (i = 0; i < NR_VCPUS ; i++) { - ret = access_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); TEST_ASSERT(!ret && !val, "read GICR_TYPER before rdist region setting"); } @@ -374,10 +377,10 @@ static void test_typer_accesses(void) KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); /* The 2 first rdists should be put there (vcpu 0 and 3) */ - ret = access_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); TEST_ASSERT(!ret && !val, "read typer of rdist #0"); - ret = access_redist_reg(v.gic_fd, 3, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 3, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x310, "read typer of rdist #1"); addr = REDIST_REGION_ATTR_ADDR(10, 0x100000, 0, 1); @@ -385,11 +388,11 @@ static void test_typer_accesses(void) KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); TEST_ASSERT(ret && errno == EINVAL, "collision with previous rdist region"); - ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x100, "no redist region attached to vcpu #1 yet, last cannot be returned"); - ret = access_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x200, "no redist region attached to vcpu #2, last cannot be returned"); @@ -397,10 +400,10 @@ static void test_typer_accesses(void) kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); - ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x100, "read typer of rdist #1"); - ret = access_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x210, "read typer of rdist #1, last properly returned"); @@ -417,7 +420,7 @@ static void test_typer_accesses(void) * rdist region #2 @0x200000 2 rdist capacity * rdists: 1, 2 */ -static void test_last_bit_redist_regions(void) +static void test_v3_last_bit_redist_regions(void) { uint32_t vcpuids[] = { 0, 3, 5, 4, 1, 2 }; struct vm_gic v; @@ -444,29 +447,29 @@ static void test_last_bit_redist_regions(void) kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); - ret = access_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x000, "read typer of rdist #0"); - ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x100, "read typer of rdist #1"); - ret = access_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x200, "read typer of rdist #2"); - ret = access_redist_reg(v.gic_fd, 3, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 3, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x310, "read typer of rdist #3"); - ret = access_redist_reg(v.gic_fd, 5, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 5, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x500, "read typer of rdist #5"); - ret = access_redist_reg(v.gic_fd, 4, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 4, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x410, "read typer of rdist #4"); vm_gic_destroy(&v); } /* Test last bit with legacy region */ -static void test_last_bit_single_rdist(void) +static void test_v3_last_bit_single_rdist(void) { uint32_t vcpuids[] = { 0, 3, 5, 4, 1, 2 }; struct vm_gic v; @@ -485,28 +488,32 @@ static void test_last_bit_single_rdist(void) kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); - ret = access_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 0, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x000, "read typer of rdist #0"); - ret = access_redist_reg(v.gic_fd, 3, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 3, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x300, "read typer of rdist #1"); - ret = access_redist_reg(v.gic_fd, 5, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 5, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x500, "read typer of rdist #2"); - ret = access_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 1, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x100, "read typer of rdist #3"); - ret = access_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); + ret = access_v3_redist_reg(v.gic_fd, 2, GICR_TYPER, &val, false); TEST_ASSERT(!ret && val == 0x210, "read typer of rdist #3"); vm_gic_destroy(&v); } -void test_kvm_device(void) +/* + * Returns 0 if it's possible to create GIC device of a given type (V2 or V3). + */ +int test_kvm_device(uint32_t gic_dev_type) { struct vm_gic v; int ret, fd; + uint32_t other; v.vm = vm_create_default_with_vcpus(NR_VCPUS, 0, 0, guest_code, NULL); @@ -514,38 +521,65 @@ void test_kvm_device(void) ret = _kvm_create_device(v.vm, 0, true, &fd); TEST_ASSERT(ret && errno == ENODEV, "unsupported device"); - /* trial mode with VGIC_V3 device */ - ret = _kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, true, &fd); - if (ret) { - print_skip("GICv3 not supported"); - exit(KSFT_SKIP); - } - v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); + /* trial mode */ + ret = _kvm_create_device(v.vm, gic_dev_type, true, &fd); + if (ret) + return ret; + v.gic_fd = kvm_create_device(v.vm, gic_dev_type, false); + + ret = _kvm_create_device(v.vm, gic_dev_type, false, &fd); + TEST_ASSERT(ret && errno == EEXIST, "create GIC device twice"); - ret = _kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false, &fd); - TEST_ASSERT(ret && errno == EEXIST, "create GICv3 device twice"); + kvm_create_device(v.vm, gic_dev_type, true); - kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, true); + /* try to create the other gic_dev_type */ + other = VGIC_DEV_IS_V2(gic_dev_type) ? KVM_DEV_TYPE_ARM_VGIC_V3 + : KVM_DEV_TYPE_ARM_VGIC_V2; - if (!_kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V2, true, &fd)) { - ret = _kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V2, false, &fd); - TEST_ASSERT(ret && errno == EINVAL, "create GICv2 while v3 exists"); + if (!_kvm_create_device(v.vm, other, true, &fd)) { + ret = _kvm_create_device(v.vm, other, false, &fd); + TEST_ASSERT(ret && errno == EINVAL, + "create GIC device while other version exists"); } vm_gic_destroy(&v); + + return 0; +} + +void run_tests(uint32_t gic_dev_type) +{ + if (VGIC_DEV_IS_V3(gic_dev_type)) { + test_v3_vcpus_then_vgic(gic_dev_type); + test_v3_vgic_then_vcpus(gic_dev_type); + test_v3_new_redist_regions(); + test_v3_typer_accesses(); + test_v3_last_bit_redist_regions(); + test_v3_last_bit_single_rdist(); + } } int main(int ac, char **av) { + int ret; + max_ipa_bits = kvm_check_cap(KVM_CAP_ARM_VM_IPA_SIZE); - test_kvm_device(); - test_vcpus_then_vgic(); - test_vgic_then_vcpus(); - test_new_redist_regions(); - test_typer_accesses(); - test_last_bit_redist_regions(); - test_last_bit_single_rdist(); + ret = test_kvm_device(KVM_DEV_TYPE_ARM_VGIC_V3); + if (!ret) { + pr_info("Running GIC_v3 tests.\n"); + run_tests(KVM_DEV_TYPE_ARM_VGIC_V3); + return 0; + } + + ret = test_kvm_device(KVM_DEV_TYPE_ARM_VGIC_V2); + if (!ret) { + pr_info("Running GIC_v2 tests.\n"); + run_tests(KVM_DEV_TYPE_ARM_VGIC_V2); + return 0; + } + print_skip("No GICv2 nor GICv3 support"); + exit(KSFT_SKIP); return 0; } -- cgit From 46fb941bc04d3541776c09c2bf641e7f34e62a01 Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Mon, 4 Oct 2021 18:19:17 -0700 Subject: KVM: arm64: selftests: Make vgic_init/vm_gic_create version agnostic Make vm_gic_create GIC version agnostic in the vgic_init test. Also add a nr_vcpus arg into it instead of defaulting to NR_VCPUS. No functional change. Reviewed-by: Eric Auger Signed-off-by: Ricardo Koller Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005011921.437353-8-ricarkol@google.com --- tools/testing/selftests/kvm/aarch64/vgic_init.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c index 896a29f2503d..7521dc80cf23 100644 --- a/tools/testing/selftests/kvm/aarch64/vgic_init.c +++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c @@ -28,6 +28,7 @@ struct vm_gic { struct kvm_vm *vm; int gic_fd; + uint32_t gic_dev_type; }; static int max_ipa_bits; @@ -61,12 +62,13 @@ static int run_vcpu(struct kvm_vm *vm, uint32_t vcpuid) return 0; } -static struct vm_gic vm_gic_v3_create(void) +static struct vm_gic vm_gic_create_with_vcpus(uint32_t gic_dev_type, uint32_t nr_vcpus) { struct vm_gic v; - v.vm = vm_create_default_with_vcpus(NR_VCPUS, 0, 0, guest_code, NULL); - v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); + v.gic_dev_type = gic_dev_type; + v.vm = vm_create_default_with_vcpus(nr_vcpus, 0, 0, guest_code, NULL); + v.gic_fd = kvm_create_device(v.vm, gic_dev_type, false); return v; } @@ -257,8 +259,7 @@ static void test_v3_vgic_then_vcpus(uint32_t gic_dev_type) struct vm_gic v; int ret, i; - v.vm = vm_create_default(0, 0, guest_code); - v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); + v = vm_gic_create_with_vcpus(gic_dev_type, 1); subtest_v3_dist_rdist(&v); @@ -278,7 +279,7 @@ static void test_v3_vcpus_then_vgic(uint32_t gic_dev_type) struct vm_gic v; int ret; - v = vm_gic_v3_create(); + v = vm_gic_create_with_vcpus(gic_dev_type, NR_VCPUS); subtest_v3_dist_rdist(&v); @@ -295,7 +296,7 @@ static void test_v3_new_redist_regions(void) uint64_t addr; int ret; - v = vm_gic_v3_create(); + v = vm_gic_create_with_vcpus(KVM_DEV_TYPE_ARM_VGIC_V3, NR_VCPUS); subtest_v3_redist_regions(&v); kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true); @@ -306,7 +307,7 @@ static void test_v3_new_redist_regions(void) /* step2 */ - v = vm_gic_v3_create(); + v = vm_gic_create_with_vcpus(KVM_DEV_TYPE_ARM_VGIC_V3, NR_VCPUS); subtest_v3_redist_regions(&v); addr = REDIST_REGION_ATTR_ADDR(1, 0x280000, 0, 2); @@ -320,7 +321,7 @@ static void test_v3_new_redist_regions(void) /* step 3 */ - v = vm_gic_v3_create(); + v = vm_gic_create_with_vcpus(KVM_DEV_TYPE_ARM_VGIC_V3, NR_VCPUS); subtest_v3_redist_regions(&v); _kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, -- cgit From c44df5f9ff31daaa72b3a673422d5cca03a1fd02 Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Mon, 4 Oct 2021 18:19:18 -0700 Subject: KVM: arm64: selftests: Add some tests for GICv2 in vgic_init Add some GICv2 tests: general KVM device tests and DIST/CPUIF overlap tests. Do this by making test_vcpus_then_vgic and test_vgic_then_vcpus in vgic_init GIC version agnostic. Signed-off-by: Ricardo Koller Reviewed-by: Eric Auger Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005011921.437353-9-ricarkol@google.com --- tools/testing/selftests/kvm/aarch64/vgic_init.c | 111 +++++++++++++++++------- 1 file changed, 79 insertions(+), 32 deletions(-) diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c index 7521dc80cf23..cb69e195ad1d 100644 --- a/tools/testing/selftests/kvm/aarch64/vgic_init.c +++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c @@ -79,74 +79,120 @@ static void vm_gic_destroy(struct vm_gic *v) kvm_vm_free(v->vm); } +struct vgic_region_attr { + uint64_t attr; + uint64_t size; + uint64_t alignment; +}; + +struct vgic_region_attr gic_v3_dist_region = { + .attr = KVM_VGIC_V3_ADDR_TYPE_DIST, + .size = 0x10000, + .alignment = 0x10000, +}; + +struct vgic_region_attr gic_v3_redist_region = { + .attr = KVM_VGIC_V3_ADDR_TYPE_REDIST, + .size = NR_VCPUS * 0x20000, + .alignment = 0x10000, +}; + +struct vgic_region_attr gic_v2_dist_region = { + .attr = KVM_VGIC_V2_ADDR_TYPE_DIST, + .size = 0x1000, + .alignment = 0x1000, +}; + +struct vgic_region_attr gic_v2_cpu_region = { + .attr = KVM_VGIC_V2_ADDR_TYPE_CPU, + .size = 0x2000, + .alignment = 0x1000, +}; + /** - * Helper routine that performs KVM device tests in general and - * especially ARM_VGIC_V3 ones. Eventually the ARM_VGIC_V3 - * device gets created, a legacy RDIST region is set at @0x0 - * and a DIST region is set @0x60000 + * Helper routine that performs KVM device tests in general. Eventually the + * ARM_VGIC (GICv2 or GICv3) device gets created with an overlapping + * DIST/REDIST (or DIST/CPUIF for GICv2). Assumption is 4 vcpus are going to be + * used hence the overlap. In the case of GICv3, A RDIST region is set at @0x0 + * and a DIST region is set @0x70000. The GICv2 case sets a CPUIF @0x0 and a + * DIST region @0x1000. */ -static void subtest_v3_dist_rdist(struct vm_gic *v) +static void subtest_dist_rdist(struct vm_gic *v) { int ret; uint64_t addr; + struct vgic_region_attr rdist; /* CPU interface in GICv2*/ + struct vgic_region_attr dist; + + rdist = VGIC_DEV_IS_V3(v->gic_dev_type) ? gic_v3_redist_region + : gic_v2_cpu_region; + dist = VGIC_DEV_IS_V3(v->gic_dev_type) ? gic_v3_dist_region + : gic_v2_dist_region; /* Check existing group/attributes */ kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, - KVM_VGIC_V3_ADDR_TYPE_DIST); + dist.attr); kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, - KVM_VGIC_V3_ADDR_TYPE_REDIST); + rdist.attr); /* check non existing attribute */ - ret = _kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, 0); + ret = _kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, -1); TEST_ASSERT(ret && errno == ENXIO, "attribute not supported"); /* misaligned DIST and REDIST address settings */ - addr = 0x1000; + addr = dist.alignment / 0x10; ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, - KVM_VGIC_V3_ADDR_TYPE_DIST, &addr, true); - TEST_ASSERT(ret && errno == EINVAL, "GICv3 dist base not 64kB aligned"); + dist.attr, &addr, true); + TEST_ASSERT(ret && errno == EINVAL, "GIC dist base not aligned"); + addr = rdist.alignment / 0x10; ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, - KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); - TEST_ASSERT(ret && errno == EINVAL, "GICv3 redist base not 64kB aligned"); + rdist.attr, &addr, true); + TEST_ASSERT(ret && errno == EINVAL, "GIC redist/cpu base not aligned"); /* out of range address */ if (max_ipa_bits) { addr = 1ULL << max_ipa_bits; ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, - KVM_VGIC_V3_ADDR_TYPE_DIST, &addr, true); + dist.attr, &addr, true); TEST_ASSERT(ret && errno == E2BIG, "dist address beyond IPA limit"); ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, - KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); + rdist.attr, &addr, true); TEST_ASSERT(ret && errno == E2BIG, "redist address beyond IPA limit"); } /* set REDIST base address @0x0*/ addr = 0x00000; kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, - KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); + rdist.attr, &addr, true); /* Attempt to create a second legacy redistributor region */ addr = 0xE0000; ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, - KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); - TEST_ASSERT(ret && errno == EEXIST, "GICv3 redist base set again"); + rdist.attr, &addr, true); + TEST_ASSERT(ret && errno == EEXIST, "GIC redist base set again"); - /* Attempt to mix legacy and new redistributor regions */ - addr = REDIST_REGION_ATTR_ADDR(NR_VCPUS, 0x100000, 0, 0); - ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, - KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); - TEST_ASSERT(ret && errno == EINVAL, "attempt to mix GICv3 REDIST and REDIST_REGION"); + ret = _kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_V3_ADDR_TYPE_REDIST); + if (!ret) { + /* Attempt to mix legacy and new redistributor regions */ + addr = REDIST_REGION_ATTR_ADDR(NR_VCPUS, 0x100000, 0, 0); + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, + &addr, true); + TEST_ASSERT(ret && errno == EINVAL, + "attempt to mix GICv3 REDIST and REDIST_REGION"); + } /* * Set overlapping DIST / REDIST, cannot be detected here. Will be detected * on first vcpu run instead. */ - addr = 3 * 2 * 0x10000; - kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V3_ADDR_TYPE_DIST, - &addr, true); + addr = rdist.size - rdist.alignment; + kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + dist.attr, &addr, true); } /* Test the new REDIST region API */ @@ -254,14 +300,14 @@ static void subtest_v3_redist_regions(struct vm_gic *v) * VGIC KVM device is created and initialized before the secondary CPUs * get created */ -static void test_v3_vgic_then_vcpus(uint32_t gic_dev_type) +static void test_vgic_then_vcpus(uint32_t gic_dev_type) { struct vm_gic v; int ret, i; v = vm_gic_create_with_vcpus(gic_dev_type, 1); - subtest_v3_dist_rdist(&v); + subtest_dist_rdist(&v); /* Add the rest of the VCPUs */ for (i = 1; i < NR_VCPUS; ++i) @@ -274,14 +320,14 @@ static void test_v3_vgic_then_vcpus(uint32_t gic_dev_type) } /* All the VCPUs are created before the VGIC KVM device gets initialized */ -static void test_v3_vcpus_then_vgic(uint32_t gic_dev_type) +static void test_vcpus_then_vgic(uint32_t gic_dev_type) { struct vm_gic v; int ret; v = vm_gic_create_with_vcpus(gic_dev_type, NR_VCPUS); - subtest_v3_dist_rdist(&v); + subtest_dist_rdist(&v); ret = run_vcpu(v.vm, 3); TEST_ASSERT(ret == -EINVAL, "dist/rdist overlap detected on 1st vcpu run"); @@ -550,9 +596,10 @@ int test_kvm_device(uint32_t gic_dev_type) void run_tests(uint32_t gic_dev_type) { + test_vcpus_then_vgic(gic_dev_type); + test_vgic_then_vcpus(gic_dev_type); + if (VGIC_DEV_IS_V3(gic_dev_type)) { - test_v3_vcpus_then_vgic(gic_dev_type); - test_v3_vgic_then_vcpus(gic_dev_type); test_v3_new_redist_regions(); test_v3_typer_accesses(); test_v3_last_bit_redist_regions(); -- cgit From 2dcd9aa1c3a5d3c90047d67efd08f0518f915449 Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Mon, 4 Oct 2021 18:19:19 -0700 Subject: KVM: arm64: selftests: Add tests for GIC redist/cpuif partially above IPA range Add tests for checking that KVM returns the right error when trying to set GICv2 CPU interfaces or GICv3 Redistributors partially above the addressable IPA range. Also tighten the IPA range by replacing KVM_CAP_ARM_VM_IPA_SIZE with the IPA range currently configured for the guest (i.e., the default). The check for the GICv3 redistributor created using the REDIST legacy API is not sufficient as this new test only checks the check done using vcpus already created when setting the base. The next commit will add the missing test which verifies that the KVM check is done at first vcpu run. Signed-off-by: Ricardo Koller Reviewed-by: Eric Auger Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005011921.437353-10-ricarkol@google.com --- tools/testing/selftests/kvm/aarch64/vgic_init.c | 38 +++++++++++++++++-------- 1 file changed, 26 insertions(+), 12 deletions(-) diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c index cb69e195ad1d..eadd448b3a96 100644 --- a/tools/testing/selftests/kvm/aarch64/vgic_init.c +++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c @@ -31,7 +31,7 @@ struct vm_gic { uint32_t gic_dev_type; }; -static int max_ipa_bits; +static uint64_t max_phys_size; /* helper to access a redistributor register */ static int access_v3_redist_reg(int gicv3_fd, int vcpu, int offset, @@ -152,16 +152,21 @@ static void subtest_dist_rdist(struct vm_gic *v) TEST_ASSERT(ret && errno == EINVAL, "GIC redist/cpu base not aligned"); /* out of range address */ - if (max_ipa_bits) { - addr = 1ULL << max_ipa_bits; - ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, - dist.attr, &addr, true); - TEST_ASSERT(ret && errno == E2BIG, "dist address beyond IPA limit"); + addr = max_phys_size; + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + dist.attr, &addr, true); + TEST_ASSERT(ret && errno == E2BIG, "dist address beyond IPA limit"); - ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, - rdist.attr, &addr, true); - TEST_ASSERT(ret && errno == E2BIG, "redist address beyond IPA limit"); - } + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + rdist.attr, &addr, true); + TEST_ASSERT(ret && errno == E2BIG, "redist address beyond IPA limit"); + + /* Space for half a rdist (a rdist is: 2 * rdist.alignment). */ + addr = max_phys_size - dist.alignment; + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + rdist.attr, &addr, true); + TEST_ASSERT(ret && errno == E2BIG, + "half of the redist is beyond IPA limit"); /* set REDIST base address @0x0*/ addr = 0x00000; @@ -250,12 +255,19 @@ static void subtest_v3_redist_regions(struct vm_gic *v) kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); - addr = REDIST_REGION_ATTR_ADDR(1, 1ULL << max_ipa_bits, 0, 2); + addr = REDIST_REGION_ATTR_ADDR(1, max_phys_size, 0, 2); ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); TEST_ASSERT(ret && errno == E2BIG, "register redist region with base address beyond IPA range"); + /* The last redist is above the pa range. */ + addr = REDIST_REGION_ATTR_ADDR(2, max_phys_size - 0x30000, 0, 2); + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true); + TEST_ASSERT(ret && errno == E2BIG, + "register redist region with top address beyond IPA range"); + addr = 0x260000; ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); @@ -610,8 +622,10 @@ void run_tests(uint32_t gic_dev_type) int main(int ac, char **av) { int ret; + int pa_bits; - max_ipa_bits = kvm_check_cap(KVM_CAP_ARM_VM_IPA_SIZE); + pa_bits = vm_guest_mode_params[VM_MODE_DEFAULT].pa_bits; + max_phys_size = 1ULL << pa_bits; ret = test_kvm_device(KVM_DEV_TYPE_ARM_VGIC_V3); if (!ret) { -- cgit From 1883458638979531fc4fcbc26d15fec3e51e1734 Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Mon, 4 Oct 2021 18:19:20 -0700 Subject: KVM: arm64: selftests: Add test for legacy GICv3 REDIST base partially above IPA range Add a new test into vgic_init which checks that the first vcpu fails to run if there is not sufficient REDIST space below the addressable IPA range. This only applies to the KVM_VGIC_V3_ADDR_TYPE_REDIST legacy API as the required REDIST space is not know when setting the DIST region. Note that using the REDIST_REGION API results in a different check at first vcpu run: that the number of redist regions is enough for all vcpus. And there is already a test for that case in, the first step of test_v3_new_redist_regions. Reviewed-by: Eric Auger Signed-off-by: Ricardo Koller Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005011921.437353-11-ricarkol@google.com --- tools/testing/selftests/kvm/aarch64/vgic_init.c | 34 +++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c index eadd448b3a96..80be1940d2ad 100644 --- a/tools/testing/selftests/kvm/aarch64/vgic_init.c +++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c @@ -565,6 +565,39 @@ static void test_v3_last_bit_single_rdist(void) vm_gic_destroy(&v); } +/* Uses the legacy REDIST region API. */ +static void test_v3_redist_ipa_range_check_at_vcpu_run(void) +{ + struct vm_gic v; + int ret, i; + uint64_t addr; + + v = vm_gic_create_with_vcpus(KVM_DEV_TYPE_ARM_VGIC_V3, 1); + + /* Set space for 3 redists, we have 1 vcpu, so this succeeds. */ + addr = max_phys_size - (3 * 2 * 0x10000); + kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true); + + addr = 0x00000; + kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_V3_ADDR_TYPE_DIST, &addr, true); + + /* Add the rest of the VCPUs */ + for (i = 1; i < NR_VCPUS; ++i) + vm_vcpu_add_default(v.vm, i, guest_code); + + kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, + KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true); + + /* Attempt to run a vcpu without enough redist space. */ + ret = run_vcpu(v.vm, 2); + TEST_ASSERT(ret && errno == EINVAL, + "redist base+size above PA range detected on 1st vcpu run"); + + vm_gic_destroy(&v); +} + /* * Returns 0 if it's possible to create GIC device of a given type (V2 or V3). */ @@ -616,6 +649,7 @@ void run_tests(uint32_t gic_dev_type) test_v3_typer_accesses(); test_v3_last_bit_redist_regions(); test_v3_last_bit_single_rdist(); + test_v3_redist_ipa_range_check_at_vcpu_run(); } } -- cgit From 3e197f17b23ba7c1a3c7cb1d27f7494444aa42e3 Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Mon, 4 Oct 2021 18:19:21 -0700 Subject: KVM: arm64: selftests: Add init ITS device test Add some ITS device init tests: general KVM device tests (address not defined already, address aligned) and tests for the ITS region being within the addressable IPA range. Signed-off-by: Ricardo Koller Reviewed-by: Eric Auger Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211005011921.437353-12-ricarkol@google.com --- tools/testing/selftests/kvm/aarch64/vgic_init.c | 42 +++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c index 80be1940d2ad..c563489ff760 100644 --- a/tools/testing/selftests/kvm/aarch64/vgic_init.c +++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c @@ -598,6 +598,47 @@ static void test_v3_redist_ipa_range_check_at_vcpu_run(void) vm_gic_destroy(&v); } +static void test_v3_its_region(void) +{ + struct vm_gic v; + uint64_t addr; + int its_fd, ret; + + v = vm_gic_create_with_vcpus(KVM_DEV_TYPE_ARM_VGIC_V3, NR_VCPUS); + its_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_ITS, false); + + addr = 0x401000; + ret = _kvm_device_access(its_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_ITS_ADDR_TYPE, &addr, true); + TEST_ASSERT(ret && errno == EINVAL, + "ITS region with misaligned address"); + + addr = max_phys_size; + ret = _kvm_device_access(its_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_ITS_ADDR_TYPE, &addr, true); + TEST_ASSERT(ret && errno == E2BIG, + "register ITS region with base address beyond IPA range"); + + addr = max_phys_size - 0x10000; + ret = _kvm_device_access(its_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_ITS_ADDR_TYPE, &addr, true); + TEST_ASSERT(ret && errno == E2BIG, + "Half of ITS region is beyond IPA range"); + + /* This one succeeds setting the ITS base */ + addr = 0x400000; + kvm_device_access(its_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_ITS_ADDR_TYPE, &addr, true); + + addr = 0x300000; + ret = _kvm_device_access(its_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_ITS_ADDR_TYPE, &addr, true); + TEST_ASSERT(ret && errno == EEXIST, "ITS base set again"); + + close(its_fd); + vm_gic_destroy(&v); +} + /* * Returns 0 if it's possible to create GIC device of a given type (V2 or V3). */ @@ -650,6 +691,7 @@ void run_tests(uint32_t gic_dev_type) test_v3_last_bit_redist_regions(); test_v3_last_bit_single_rdist(); test_v3_redist_ipa_range_check_at_vcpu_run(); + test_v3_its_region(); } } -- cgit From b6a68b97af23cc75781bed38221ce73144ac2e39 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 1 Oct 2021 18:05:53 +0100 Subject: KVM: arm64: Allow KVM to be disabled from the command line Although KVM can be compiled out of the kernel, it cannot be disabled at runtime. Allow this possibility by introducing a new mode that will prevent KVM from initialising. This is useful in the (limited) circumstances where you don't want KVM to be available (what is wrong with you?), or when you want to install another hypervisor instead (good luck with that). Reviewed-by: David Brazdil Acked-by: Will Deacon Acked-by: Suzuki K Poulose Signed-off-by: Marc Zyngier Reviewed-by: Andrew Scull Link: https://lore.kernel.org/r/20211001170553.3062988-1-maz@kernel.org --- Documentation/admin-guide/kernel-parameters.txt | 2 ++ arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/kvm/arm.c | 14 +++++++++++++- 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 91ba391f9b32..f268731a3d4d 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -2365,6 +2365,8 @@ kvm-arm.mode= [KVM,ARM] Select one of KVM/arm64's modes of operation. + none: Forcefully disable KVM. + nvhe: Standard nVHE-based mode, without support for protected guests. diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index f8be56d5342b..019490c67976 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -58,6 +58,7 @@ enum kvm_mode { KVM_MODE_DEFAULT, KVM_MODE_PROTECTED, + KVM_MODE_NONE, }; enum kvm_mode kvm_get_mode(void); diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index fe102cd2e518..658171231af9 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -2064,6 +2064,11 @@ int kvm_arch_init(void *opaque) return -ENODEV; } + if (kvm_get_mode() == KVM_MODE_NONE) { + kvm_info("KVM disabled from command line\n"); + return -ENODEV; + } + in_hyp_mode = is_kernel_in_hyp_mode(); if (cpus_have_final_cap(ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE) || @@ -2137,8 +2142,15 @@ static int __init early_kvm_mode_cfg(char *arg) return 0; } - if (strcmp(arg, "nvhe") == 0 && !WARN_ON(is_kernel_in_hyp_mode())) + if (strcmp(arg, "nvhe") == 0 && !WARN_ON(is_kernel_in_hyp_mode())) { + kvm_mode = KVM_MODE_DEFAULT; return 0; + } + + if (strcmp(arg, "none") == 0) { + kvm_mode = KVM_MODE_NONE; + return 0; + } return -EINVAL; } -- cgit From c8f1e96734069c788b10545f4fd82bcbb6b55dfa Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Tue, 21 Sep 2021 15:22:30 -0700 Subject: KVM: arm64: Unconditionally include generic KVM's Kconfig Unconditionally "source" the generic KVM Kconfig instead of wrapping it with KVM=y. A future patch will select HAVE_KVM so that referencing HAVE_KVM in common kernel code doesn't break, and because KVM=y and HAVE_KVM=n is weird. Source the generic KVM Kconfig unconditionally so that HAVE_KVM and KVM don't end up with a circular dependency. Note, all but one of generic KVM's "configs" are of the HAVE_XYZ nature, and the one outlier correctly takes a dependency on CONFIG_KVM, i.e. the generic Kconfig is intended to be included unconditionally. No functional change intended. Signed-off-by: Sean Christopherson [maz: made NVHE_EL2_DEBUG depend on KVM] Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210921222231.518092-2-seanjc@google.com --- arch/arm64/kvm/Kconfig | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig index d7eec0b43744..1170b20d68a7 100644 --- a/arch/arm64/kvm/Kconfig +++ b/arch/arm64/kvm/Kconfig @@ -4,6 +4,7 @@ # source "virt/lib/Kconfig" +source "virt/kvm/Kconfig" menuconfig VIRTUALIZATION bool "Virtualization" @@ -43,12 +44,9 @@ menuconfig KVM If unsure, say N. -if KVM - -source "virt/kvm/Kconfig" - config NVHE_EL2_DEBUG bool "Debug mode for non-VHE EL2 object" + depends on KVM help Say Y here to enable the debug mode for the non-VHE KVM EL2 object. Failure reports will BUG() in the hypervisor. This is intended for @@ -56,6 +54,4 @@ config NVHE_EL2_DEBUG If unsure, say N. -endif # KVM - endif # VIRTUALIZATION -- cgit From e26bb75aa2f17fc079e6a24dff653b098e1f5d37 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Tue, 21 Sep 2021 15:22:31 -0700 Subject: KVM: arm64: Depend on HAVE_KVM instead of OF Select HAVE_KVM at all times on arm64, as the OF requirement is always there (even in the case of an ACPI system, we still depend on some of the OF infrastructure), and won't fo away. No functional change intended. Signed-off-by: Sean Christopherson Acked-by: Will Deacon [maz: Drop the "HAVE_KVM if OF" dependency, as OF is always there on arm64, new commit message] Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210921222231.518092-3-seanjc@google.com --- arch/arm64/Kconfig | 1 + arch/arm64/kvm/Kconfig | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 5c7ae4c3954b..0d921d21fd35 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -186,6 +186,7 @@ config ARM64 select HAVE_GCC_PLUGINS select HAVE_HW_BREAKPOINT if PERF_EVENTS select HAVE_IRQ_TIME_ACCOUNTING + select HAVE_KVM select HAVE_NMI select HAVE_PATA_PLATFORM select HAVE_PERF_EVENTS diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig index 1170b20d68a7..8ffcbe29395e 100644 --- a/arch/arm64/kvm/Kconfig +++ b/arch/arm64/kvm/Kconfig @@ -20,7 +20,7 @@ if VIRTUALIZATION menuconfig KVM bool "Kernel-based Virtual Machine (KVM) support" - depends on OF + depends on HAVE_KVM select MMU_NOTIFIER select PREEMPT_NOTIFIERS select HAVE_KVM_CPU_RELAX_INTERCEPT -- cgit From 00d5101b254b77c35a8d55fe46331b19192866f3 Mon Sep 17 00:00:00 2001 From: Alexandru Elisei Date: Mon, 11 Oct 2021 11:58:38 +0100 Subject: KVM: arm64: Return early from read_id_reg() if register is RAZ If read_id_reg() is called for an ID register which is Read-As-Zero (RAZ), it initializes the return value to zero, then goes through a list of registers which require special handling before returning the final value. By not returning as soon as it checks that the register should be RAZ, the function creates the opportunity for bugs, if, for example, a patch changes a register to RAZ (like has happened with PMSWINC_EL0 in commit 11663111cd49), but doesn't remove the special handling from read_id_reg(); or if a register is RAZ in certain situations, but readable in others. Return early to make it impossible for a RAZ register to be anything other than zero. Reviewed-by: Andrew Jones Signed-off-by: Alexandru Elisei Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211011105840.155815-2-alexandru.elisei@arm.com --- arch/arm64/kvm/sys_regs.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 1d46e185f31e..4adda8bf3168 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -1064,7 +1064,12 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, struct sys_reg_desc const *r, bool raz) { u32 id = reg_to_encoding(r); - u64 val = raz ? 0 : read_sanitised_ftr_reg(id); + u64 val; + + if (raz) + return 0; + + val = read_sanitised_ftr_reg(id); switch (id) { case SYS_ID_AA64PFR0_EL1: -- cgit From 5a4309762356f05df4c92629e5df15ab75c42c0d Mon Sep 17 00:00:00 2001 From: Alexandru Elisei Date: Mon, 11 Oct 2021 11:58:39 +0100 Subject: KVM: arm64: Use get_raz_reg() for userspace reads of PMSWINC_EL0 PMSWINC_EL0 is a write-only register and was initially part of the VCPU register state, but was later removed in commit 7a3ba3095a32 ("KVM: arm64: Remove PMSWINC_EL0 shadow register"). To prevent regressions, the register was kept accessible from userspace as Read-As-Zero (RAZ). The read function that is used to handle userspace reads of this register is get_raz_id_reg(), which, while technically correct, as it returns 0, it is not semantically correct, as PMSWINC_EL0 is not an ID register as the function name suggests. Add a new function, get_raz_reg(), to use it as the accessor for PMSWINC_EL0, as to not conflate get_raz_id_reg() to handle other types of registers. No functional change intended. Signed-off-by: Alexandru Elisei Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211011105840.155815-3-alexandru.elisei@arm.com --- arch/arm64/kvm/sys_regs.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 4adda8bf3168..1be827740f87 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -1285,6 +1285,15 @@ static int set_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd, return __set_id_reg(vcpu, rd, uaddr, true); } +static int get_raz_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd, + const struct kvm_one_reg *reg, void __user *uaddr) +{ + const u64 id = sys_reg_to_index(rd); + const u64 val = 0; + + return reg_to_user(uaddr, &val, id); +} + static int set_wi_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd, const struct kvm_one_reg *reg, void __user *uaddr) { @@ -1647,7 +1656,7 @@ static const struct sys_reg_desc sys_reg_descs[] = { * previously (and pointlessly) advertised in the past... */ { PMU_SYS_REG(SYS_PMSWINC_EL0), - .get_user = get_raz_id_reg, .set_user = set_wi_reg, + .get_user = get_raz_reg, .set_user = set_wi_reg, .access = access_pmswinc, .reset = NULL }, { PMU_SYS_REG(SYS_PMSELR_EL0), .access = access_pmselr, .reset = reset_pmselr, .reg = PMSELR_EL0 }, -- cgit From ebf6aa8c047352fe43b1e20e580f12d5564da28e Mon Sep 17 00:00:00 2001 From: Alexandru Elisei Date: Mon, 11 Oct 2021 11:58:40 +0100 Subject: KVM: arm64: Replace get_raz_id_reg() with get_raz_reg() Reading a RAZ ID register isn't different from reading any other RAZ register, so get rid of get_raz_id_reg() and replace it with get_raz_reg(), which does the same thing, but does it without going through two layers of indirection. No functional change. Suggested-by: Andrew Jones Signed-off-by: Alexandru Elisei Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211011105840.155815-4-alexandru.elisei@arm.com --- arch/arm64/kvm/sys_regs.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 1be827740f87..3aff06aafd0c 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -1273,12 +1273,6 @@ static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd, return __set_id_reg(vcpu, rd, uaddr, raz); } -static int get_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd, - const struct kvm_one_reg *reg, void __user *uaddr) -{ - return __get_id_reg(vcpu, rd, uaddr, true); -} - static int set_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd, const struct kvm_one_reg *reg, void __user *uaddr) { @@ -1402,7 +1396,7 @@ static unsigned int mte_visibility(const struct kvm_vcpu *vcpu, #define ID_UNALLOCATED(crm, op2) { \ Op0(3), Op1(0), CRn(0), CRm(crm), Op2(op2), \ .access = access_raz_id_reg, \ - .get_user = get_raz_id_reg, \ + .get_user = get_raz_reg, \ .set_user = set_raz_id_reg, \ } @@ -1414,7 +1408,7 @@ static unsigned int mte_visibility(const struct kvm_vcpu *vcpu, #define ID_HIDDEN(name) { \ SYS_DESC(SYS_##name), \ .access = access_raz_id_reg, \ - .get_user = get_raz_id_reg, \ + .get_user = get_raz_reg, \ .set_user = set_raz_id_reg, \ } -- cgit From 7dd9b5a157485ae8c48f76f087b1867ace016613 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sun, 10 Oct 2021 15:56:26 +0100 Subject: KVM: arm64: Move __get_fault_info() and co into their own include file In order to avoid including the whole of the switching helpers in unrelated files, move the __get_fault_info() and related helpers into their own include file. Signed-off-by: Marc Zyngier Signed-off-by: Fuad Tabba Link: https://lore.kernel.org/r/20211010145636.1950948-2-tabba@google.com --- arch/arm64/kvm/hyp/include/hyp/fault.h | 75 +++++++++++++++++++++++++++++++++ arch/arm64/kvm/hyp/include/hyp/switch.h | 61 +-------------------------- arch/arm64/kvm/hyp/nvhe/mem_protect.c | 2 +- 3 files changed, 77 insertions(+), 61 deletions(-) create mode 100644 arch/arm64/kvm/hyp/include/hyp/fault.h diff --git a/arch/arm64/kvm/hyp/include/hyp/fault.h b/arch/arm64/kvm/hyp/include/hyp/fault.h new file mode 100644 index 000000000000..1b8a2dcd712f --- /dev/null +++ b/arch/arm64/kvm/hyp/include/hyp/fault.h @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2015 - ARM Ltd + * Author: Marc Zyngier + */ + +#ifndef __ARM64_KVM_HYP_FAULT_H__ +#define __ARM64_KVM_HYP_FAULT_H__ + +#include +#include +#include +#include + +static inline bool __translate_far_to_hpfar(u64 far, u64 *hpfar) +{ + u64 par, tmp; + + /* + * Resolve the IPA the hard way using the guest VA. + * + * Stage-1 translation already validated the memory access + * rights. As such, we can use the EL1 translation regime, and + * don't have to distinguish between EL0 and EL1 access. + * + * We do need to save/restore PAR_EL1 though, as we haven't + * saved the guest context yet, and we may return early... + */ + par = read_sysreg_par(); + if (!__kvm_at("s1e1r", far)) + tmp = read_sysreg_par(); + else + tmp = SYS_PAR_EL1_F; /* back to the guest */ + write_sysreg(par, par_el1); + + if (unlikely(tmp & SYS_PAR_EL1_F)) + return false; /* Translation failed, back to guest */ + + /* Convert PAR to HPFAR format */ + *hpfar = PAR_TO_HPFAR(tmp); + return true; +} + +static inline bool __get_fault_info(u64 esr, struct kvm_vcpu_fault_info *fault) +{ + u64 hpfar, far; + + far = read_sysreg_el2(SYS_FAR); + + /* + * The HPFAR can be invalid if the stage 2 fault did not + * happen during a stage 1 page table walk (the ESR_EL2.S1PTW + * bit is clear) and one of the two following cases are true: + * 1. The fault was due to a permission fault + * 2. The processor carries errata 834220 + * + * Therefore, for all non S1PTW faults where we either have a + * permission fault or the errata workaround is enabled, we + * resolve the IPA using the AT instruction. + */ + if (!(esr & ESR_ELx_S1PTW) && + (cpus_have_final_cap(ARM64_WORKAROUND_834220) || + (esr & ESR_ELx_FSC_TYPE) == FSC_PERM)) { + if (!__translate_far_to_hpfar(far, &hpfar)) + return false; + } else { + hpfar = read_sysreg(hpfar_el2); + } + + fault->far_el2 = far; + fault->hpfar_el2 = hpfar; + return true; +} + +#endif diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index a0e78a6027be..54abc8298ec3 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -8,6 +8,7 @@ #define __ARM64_KVM_HYP_SWITCH_H__ #include +#include #include #include @@ -133,66 +134,6 @@ static inline void ___deactivate_traps(struct kvm_vcpu *vcpu) } } -static inline bool __translate_far_to_hpfar(u64 far, u64 *hpfar) -{ - u64 par, tmp; - - /* - * Resolve the IPA the hard way using the guest VA. - * - * Stage-1 translation already validated the memory access - * rights. As such, we can use the EL1 translation regime, and - * don't have to distinguish between EL0 and EL1 access. - * - * We do need to save/restore PAR_EL1 though, as we haven't - * saved the guest context yet, and we may return early... - */ - par = read_sysreg_par(); - if (!__kvm_at("s1e1r", far)) - tmp = read_sysreg_par(); - else - tmp = SYS_PAR_EL1_F; /* back to the guest */ - write_sysreg(par, par_el1); - - if (unlikely(tmp & SYS_PAR_EL1_F)) - return false; /* Translation failed, back to guest */ - - /* Convert PAR to HPFAR format */ - *hpfar = PAR_TO_HPFAR(tmp); - return true; -} - -static inline bool __get_fault_info(u64 esr, struct kvm_vcpu_fault_info *fault) -{ - u64 hpfar, far; - - far = read_sysreg_el2(SYS_FAR); - - /* - * The HPFAR can be invalid if the stage 2 fault did not - * happen during a stage 1 page table walk (the ESR_EL2.S1PTW - * bit is clear) and one of the two following cases are true: - * 1. The fault was due to a permission fault - * 2. The processor carries errata 834220 - * - * Therefore, for all non S1PTW faults where we either have a - * permission fault or the errata workaround is enabled, we - * resolve the IPA using the AT instruction. - */ - if (!(esr & ESR_ELx_S1PTW) && - (cpus_have_final_cap(ARM64_WORKAROUND_834220) || - (esr & ESR_ELx_FSC_TYPE) == FSC_PERM)) { - if (!__translate_far_to_hpfar(far, &hpfar)) - return false; - } else { - hpfar = read_sysreg(hpfar_el2); - } - - fault->far_el2 = far; - fault->hpfar_el2 = hpfar; - return true; -} - static inline bool __populate_fault_info(struct kvm_vcpu *vcpu) { u8 ec; diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c index bacd493a4eac..2a07d63b8498 100644 --- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c +++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c @@ -11,7 +11,7 @@ #include #include -#include +#include #include #include -- cgit From cc1e6fdfa92b82902883b70dafa729d3bd427b80 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sun, 10 Oct 2021 15:56:27 +0100 Subject: KVM: arm64: Don't include switch.h into nvhe/kvm-main.c hyp-main.c includes switch.h while it only requires adjust-pc.h. Fix it to remove an unnecessary dependency. Signed-off-by: Marc Zyngier Signed-off-by: Fuad Tabba Link: https://lore.kernel.org/r/20211010145636.1950948-3-tabba@google.com --- arch/arm64/kvm/hyp/nvhe/hyp-main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c index 2da6aa8da868..8ca1104f4774 100644 --- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c +++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c @@ -4,7 +4,7 @@ * Author: Andrew Scull */ -#include +#include #include #include -- cgit From 8fb2046180a0ad347f2e5bcae760dca67e65aa73 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sun, 10 Oct 2021 15:56:28 +0100 Subject: KVM: arm64: Move early handlers to per-EC handlers Simplify the early exception handling by slicing the gigantic decoding tree into a more manageable set of functions, similar to what we have in handle_exit.c. This will also make the structure reusable for pKVM's own early exit handling. Signed-off-by: Marc Zyngier Signed-off-by: Fuad Tabba Link: https://lore.kernel.org/r/20211010145636.1950948-4-tabba@google.com --- arch/arm64/kvm/hyp/include/hyp/switch.h | 160 ++++++++++++++++++-------------- arch/arm64/kvm/hyp/nvhe/switch.c | 16 ++++ arch/arm64/kvm/hyp/vhe/switch.c | 16 ++++ 3 files changed, 124 insertions(+), 68 deletions(-) diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index 54abc8298ec3..1e4177322be7 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -136,16 +136,7 @@ static inline void ___deactivate_traps(struct kvm_vcpu *vcpu) static inline bool __populate_fault_info(struct kvm_vcpu *vcpu) { - u8 ec; - u64 esr; - - esr = vcpu->arch.fault.esr_el2; - ec = ESR_ELx_EC(esr); - - if (ec != ESR_ELx_EC_DABT_LOW && ec != ESR_ELx_EC_IABT_LOW) - return true; - - return __get_fault_info(esr, &vcpu->arch.fault); + return __get_fault_info(vcpu->arch.fault.esr_el2, &vcpu->arch.fault); } static inline void __hyp_sve_save_host(struct kvm_vcpu *vcpu) @@ -166,8 +157,13 @@ static inline void __hyp_sve_restore_guest(struct kvm_vcpu *vcpu) write_sysreg_el1(__vcpu_sys_reg(vcpu, ZCR_EL1), SYS_ZCR); } -/* Check for an FPSIMD/SVE trap and handle as appropriate */ -static inline bool __hyp_handle_fpsimd(struct kvm_vcpu *vcpu) +/* + * We trap the first access to the FP/SIMD to save the host context and + * restore the guest context lazily. + * If FP/SIMD is not implemented, handle the trap and inject an undefined + * instruction exception to the guest. Similarly for trapped SVE accesses. + */ +static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code) { bool sve_guest, sve_host; u8 esr_ec; @@ -185,9 +181,6 @@ static inline bool __hyp_handle_fpsimd(struct kvm_vcpu *vcpu) } esr_ec = kvm_vcpu_trap_get_class(vcpu); - if (esr_ec != ESR_ELx_EC_FP_ASIMD && - esr_ec != ESR_ELx_EC_SVE) - return false; /* Don't handle SVE traps for non-SVE vcpus here: */ if (!sve_guest && esr_ec != ESR_ELx_EC_FP_ASIMD) @@ -325,7 +318,7 @@ static inline bool esr_is_ptrauth_trap(u32 esr) DECLARE_PER_CPU(struct kvm_cpu_context, kvm_hyp_ctxt); -static inline bool __hyp_handle_ptrauth(struct kvm_vcpu *vcpu) +static bool kvm_hyp_handle_ptrauth(struct kvm_vcpu *vcpu, u64 *exit_code) { struct kvm_cpu_context *ctxt; u64 val; @@ -350,6 +343,87 @@ static inline bool __hyp_handle_ptrauth(struct kvm_vcpu *vcpu) return true; } +static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM) && + handle_tx2_tvm(vcpu)) + return true; + + if (static_branch_unlikely(&vgic_v3_cpuif_trap) && + __vgic_v3_perform_cpuif_access(vcpu) == 1) + return true; + + return false; +} + +static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + if (static_branch_unlikely(&vgic_v3_cpuif_trap) && + __vgic_v3_perform_cpuif_access(vcpu) == 1) + return true; + + return false; +} + +static bool kvm_hyp_handle_iabt_low(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + if (!__populate_fault_info(vcpu)) + return true; + + return false; +} + +static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + if (!__populate_fault_info(vcpu)) + return true; + + if (static_branch_unlikely(&vgic_v2_cpuif_trap)) { + bool valid; + + valid = kvm_vcpu_trap_get_fault_type(vcpu) == FSC_FAULT && + kvm_vcpu_dabt_isvalid(vcpu) && + !kvm_vcpu_abt_issea(vcpu) && + !kvm_vcpu_abt_iss1tw(vcpu); + + if (valid) { + int ret = __vgic_v2_perform_cpuif_access(vcpu); + + if (ret == 1) + return true; + + /* Promote an illegal access to an SError.*/ + if (ret == -1) + *exit_code = ARM_EXCEPTION_EL1_SERROR; + } + } + + return false; +} + +typedef bool (*exit_handler_fn)(struct kvm_vcpu *, u64 *); + +static const exit_handler_fn *kvm_get_exit_handler_array(void); + +/* + * Allow the hypervisor to handle the exit with an exit handler if it has one. + * + * Returns true if the hypervisor handled the exit, and control should go back + * to the guest, or false if it hasn't. + */ +static inline bool kvm_hyp_handle_exit(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + const exit_handler_fn *handlers = kvm_get_exit_handler_array(); + exit_handler_fn fn; + + fn = handlers[kvm_vcpu_trap_get_class(vcpu)]; + + if (fn) + return fn(vcpu, exit_code); + + return false; +} + /* * Return true when we were able to fixup the guest exit and should return to * the guest, false when we should restore the host state and return to the @@ -384,59 +458,9 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code) if (*exit_code != ARM_EXCEPTION_TRAP) goto exit; - if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM) && - kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_SYS64 && - handle_tx2_tvm(vcpu)) + /* Check if there's an exit handler and allow it to handle the exit. */ + if (kvm_hyp_handle_exit(vcpu, exit_code)) goto guest; - - /* - * We trap the first access to the FP/SIMD to save the host context - * and restore the guest context lazily. - * If FP/SIMD is not implemented, handle the trap and inject an - * undefined instruction exception to the guest. - * Similarly for trapped SVE accesses. - */ - if (__hyp_handle_fpsimd(vcpu)) - goto guest; - - if (__hyp_handle_ptrauth(vcpu)) - goto guest; - - if (!__populate_fault_info(vcpu)) - goto guest; - - if (static_branch_unlikely(&vgic_v2_cpuif_trap)) { - bool valid; - - valid = kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_DABT_LOW && - kvm_vcpu_trap_get_fault_type(vcpu) == FSC_FAULT && - kvm_vcpu_dabt_isvalid(vcpu) && - !kvm_vcpu_abt_issea(vcpu) && - !kvm_vcpu_abt_iss1tw(vcpu); - - if (valid) { - int ret = __vgic_v2_perform_cpuif_access(vcpu); - - if (ret == 1) - goto guest; - - /* Promote an illegal access to an SError.*/ - if (ret == -1) - *exit_code = ARM_EXCEPTION_EL1_SERROR; - - goto exit; - } - } - - if (static_branch_unlikely(&vgic_v3_cpuif_trap) && - (kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_SYS64 || - kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_CP15_32)) { - int ret = __vgic_v3_perform_cpuif_access(vcpu); - - if (ret == 1) - goto guest; - } - exit: /* Return to the host kernel and handle the exit */ return false; diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index a34b01cc8ab9..4f3992a1aabd 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -158,6 +158,22 @@ static void __pmu_switch_to_host(struct kvm_cpu_context *host_ctxt) write_sysreg(pmu->events_host, pmcntenset_el0); } +static const exit_handler_fn hyp_exit_handlers[] = { + [0 ... ESR_ELx_EC_MAX] = NULL, + [ESR_ELx_EC_CP15_32] = kvm_hyp_handle_cp15_32, + [ESR_ELx_EC_SYS64] = kvm_hyp_handle_sysreg, + [ESR_ELx_EC_SVE] = kvm_hyp_handle_fpsimd, + [ESR_ELx_EC_FP_ASIMD] = kvm_hyp_handle_fpsimd, + [ESR_ELx_EC_IABT_LOW] = kvm_hyp_handle_iabt_low, + [ESR_ELx_EC_DABT_LOW] = kvm_hyp_handle_dabt_low, + [ESR_ELx_EC_PAC] = kvm_hyp_handle_ptrauth, +}; + +static const exit_handler_fn *kvm_get_exit_handler_array(void) +{ + return hyp_exit_handlers; +} + /* Switch to the guest for legacy non-VHE systems */ int __kvm_vcpu_run(struct kvm_vcpu *vcpu) { diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c index ded2c66675f0..9aedc8afc8b9 100644 --- a/arch/arm64/kvm/hyp/vhe/switch.c +++ b/arch/arm64/kvm/hyp/vhe/switch.c @@ -96,6 +96,22 @@ void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu) __deactivate_traps_common(vcpu); } +static const exit_handler_fn hyp_exit_handlers[] = { + [0 ... ESR_ELx_EC_MAX] = NULL, + [ESR_ELx_EC_CP15_32] = kvm_hyp_handle_cp15_32, + [ESR_ELx_EC_SYS64] = kvm_hyp_handle_sysreg, + [ESR_ELx_EC_SVE] = kvm_hyp_handle_fpsimd, + [ESR_ELx_EC_FP_ASIMD] = kvm_hyp_handle_fpsimd, + [ESR_ELx_EC_IABT_LOW] = kvm_hyp_handle_iabt_low, + [ESR_ELx_EC_DABT_LOW] = kvm_hyp_handle_dabt_low, + [ESR_ELx_EC_PAC] = kvm_hyp_handle_ptrauth, +}; + +static const exit_handler_fn *kvm_get_exit_handler_array(void) +{ + return hyp_exit_handlers; +} + /* Switch to the guest for VHE systems running in EL2 */ static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu) { -- cgit From 3b1a690eda0dc1891e8fc93991b122bff6fabf8c Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Sun, 10 Oct 2021 15:56:29 +0100 Subject: KVM: arm64: Pass struct kvm to per-EC handlers We need struct kvm to check for protected VMs to be able to pick the right handlers for them in subsequent patches. Signed-off-by: Fuad Tabba Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010145636.1950948-5-tabba@google.com --- arch/arm64/kvm/hyp/include/hyp/switch.h | 4 ++-- arch/arm64/kvm/hyp/nvhe/switch.c | 2 +- arch/arm64/kvm/hyp/vhe/switch.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index 1e4177322be7..481399bf9b94 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -403,7 +403,7 @@ static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code) typedef bool (*exit_handler_fn)(struct kvm_vcpu *, u64 *); -static const exit_handler_fn *kvm_get_exit_handler_array(void); +static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm *kvm); /* * Allow the hypervisor to handle the exit with an exit handler if it has one. @@ -413,7 +413,7 @@ static const exit_handler_fn *kvm_get_exit_handler_array(void); */ static inline bool kvm_hyp_handle_exit(struct kvm_vcpu *vcpu, u64 *exit_code) { - const exit_handler_fn *handlers = kvm_get_exit_handler_array(); + const exit_handler_fn *handlers = kvm_get_exit_handler_array(kern_hyp_va(vcpu->kvm)); exit_handler_fn fn; fn = handlers[kvm_vcpu_trap_get_class(vcpu)]; diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index 4f3992a1aabd..8c9a0464be00 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -169,7 +169,7 @@ static const exit_handler_fn hyp_exit_handlers[] = { [ESR_ELx_EC_PAC] = kvm_hyp_handle_ptrauth, }; -static const exit_handler_fn *kvm_get_exit_handler_array(void) +static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm *kvm) { return hyp_exit_handlers; } diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c index 9aedc8afc8b9..f6fb97accf65 100644 --- a/arch/arm64/kvm/hyp/vhe/switch.c +++ b/arch/arm64/kvm/hyp/vhe/switch.c @@ -107,7 +107,7 @@ static const exit_handler_fn hyp_exit_handlers[] = { [ESR_ELx_EC_PAC] = kvm_hyp_handle_ptrauth, }; -static const exit_handler_fn *kvm_get_exit_handler_array(void) +static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm *kvm) { return hyp_exit_handlers; } -- cgit From 53868390778270f2890621f4498a53587719a3ff Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Sun, 10 Oct 2021 15:56:30 +0100 Subject: KVM: arm64: Add missing field descriptor for MDCR_EL2 It's not currently used. Added for completeness. No functional change intended. Suggested-by: Marc Zyngier Signed-off-by: Fuad Tabba Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010145636.1950948-6-tabba@google.com --- arch/arm64/include/asm/kvm_arm.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index 327120c0089f..a39fcf318c77 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -295,6 +295,7 @@ #define MDCR_EL2_HPMFZO (UL(1) << 29) #define MDCR_EL2_MTPME (UL(1) << 28) #define MDCR_EL2_TDCC (UL(1) << 27) +#define MDCR_EL2_HLP (UL(1) << 26) #define MDCR_EL2_HCCD (UL(1) << 23) #define MDCR_EL2_TTRF (UL(1) << 19) #define MDCR_EL2_HPMD (UL(1) << 17) -- cgit From 16dd1fbb12f72effcd3539561c2a94aed3ab6581 Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Sun, 10 Oct 2021 15:56:31 +0100 Subject: KVM: arm64: Simplify masking out MTE in feature id reg Simplify code for hiding MTE support in feature id register when MTE is not enabled/supported by KVM. No functional change intended. Signed-off-by: Fuad Tabba Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010145636.1950948-7-tabba@google.com --- arch/arm64/kvm/sys_regs.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 1d46e185f31e..447acce9ca84 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -1077,14 +1077,8 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV3), (u64)vcpu->kvm->arch.pfr0_csv3); break; case SYS_ID_AA64PFR1_EL1: - val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_MTE); - if (kvm_has_mte(vcpu->kvm)) { - u64 pfr, mte; - - pfr = read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1); - mte = cpuid_feature_extract_unsigned_field(pfr, ID_AA64PFR1_MTE_SHIFT); - val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR1_MTE), mte); - } + if (!kvm_has_mte(vcpu->kvm)) + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_MTE); break; case SYS_ID_AA64ISAR1_EL1: if (!vcpu_has_ptrauth(vcpu)) -- cgit From 6c30bfb18d0b7d09593f204c936493cfcd153956 Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Sun, 10 Oct 2021 15:56:32 +0100 Subject: KVM: arm64: Add handlers for protected VM System Registers Add system register handlers for protected VMs. These cover Sys64 registers (including feature id registers), and debug. No functional change intended as these are not hooked in yet to the guest exit handlers introduced earlier. So when trapping is triggered, the exit handlers let the host handle it, as before. Reviewed-by: Andrew Jones Signed-off-by: Fuad Tabba Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010145636.1950948-8-tabba@google.com --- arch/arm64/include/asm/kvm_fixed_config.h | 195 +++++++++++ arch/arm64/include/asm/kvm_hyp.h | 5 + arch/arm64/kvm/arm.c | 5 + arch/arm64/kvm/hyp/include/nvhe/sys_regs.h | 29 ++ arch/arm64/kvm/hyp/nvhe/Makefile | 2 +- arch/arm64/kvm/hyp/nvhe/setup.c | 3 + arch/arm64/kvm/hyp/nvhe/switch.c | 1 + arch/arm64/kvm/hyp/nvhe/sys_regs.c | 498 +++++++++++++++++++++++++++++ 8 files changed, 737 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/include/asm/kvm_fixed_config.h create mode 100644 arch/arm64/kvm/hyp/include/nvhe/sys_regs.h create mode 100644 arch/arm64/kvm/hyp/nvhe/sys_regs.c diff --git a/arch/arm64/include/asm/kvm_fixed_config.h b/arch/arm64/include/asm/kvm_fixed_config.h new file mode 100644 index 000000000000..0ed06923f7e9 --- /dev/null +++ b/arch/arm64/include/asm/kvm_fixed_config.h @@ -0,0 +1,195 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2021 Google LLC + * Author: Fuad Tabba + */ + +#ifndef __ARM64_KVM_FIXED_CONFIG_H__ +#define __ARM64_KVM_FIXED_CONFIG_H__ + +#include + +/* + * This file contains definitions for features to be allowed or restricted for + * guest virtual machines, depending on the mode KVM is running in and on the + * type of guest that is running. + * + * The ALLOW masks represent a bitmask of feature fields that are allowed + * without any restrictions as long as they are supported by the system. + * + * The RESTRICT_UNSIGNED masks, if present, represent unsigned fields for + * features that are restricted to support at most the specified feature. + * + * If a feature field is not present in either, than it is not supported. + * + * The approach taken for protected VMs is to allow features that are: + * - Needed by common Linux distributions (e.g., floating point) + * - Trivial to support, e.g., supporting the feature does not introduce or + * require tracking of additional state in KVM + * - Cannot be trapped or prevent the guest from using anyway + */ + +/* + * Allow for protected VMs: + * - Floating-point and Advanced SIMD + * - Data Independent Timing + */ +#define PVM_ID_AA64PFR0_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64PFR0_FP) | \ + ARM64_FEATURE_MASK(ID_AA64PFR0_ASIMD) | \ + ARM64_FEATURE_MASK(ID_AA64PFR0_DIT) \ + ) + +/* + * Restrict to the following *unsigned* features for protected VMs: + * - AArch64 guests only (no support for AArch32 guests): + * AArch32 adds complexity in trap handling, emulation, condition codes, + * etc... + * - RAS (v1) + * Supported by KVM + */ +#define PVM_ID_AA64PFR0_RESTRICT_UNSIGNED (\ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL0), ID_AA64PFR0_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1), ID_AA64PFR0_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL2), ID_AA64PFR0_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL3), ID_AA64PFR0_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_RAS), ID_AA64PFR0_RAS_V1) \ + ) + +/* + * Allow for protected VMs: + * - Branch Target Identification + * - Speculative Store Bypassing + */ +#define PVM_ID_AA64PFR1_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64PFR1_BT) | \ + ARM64_FEATURE_MASK(ID_AA64PFR1_SSBS) \ + ) + +/* + * Allow for protected VMs: + * - Mixed-endian + * - Distinction between Secure and Non-secure Memory + * - Mixed-endian at EL0 only + * - Non-context synchronizing exception entry and exit + */ +#define PVM_ID_AA64MMFR0_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64MMFR0_BIGENDEL) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR0_SNSMEM) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR0_BIGENDEL0) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR0_EXS) \ + ) + +/* + * Restrict to the following *unsigned* features for protected VMs: + * - 40-bit IPA + * - 16-bit ASID + */ +#define PVM_ID_AA64MMFR0_RESTRICT_UNSIGNED (\ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_PARANGE), ID_AA64MMFR0_PARANGE_40) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_ASID), ID_AA64MMFR0_ASID_16) \ + ) + +/* + * Allow for protected VMs: + * - Hardware translation table updates to Access flag and Dirty state + * - Number of VMID bits from CPU + * - Hierarchical Permission Disables + * - Privileged Access Never + * - SError interrupt exceptions from speculative reads + * - Enhanced Translation Synchronization + */ +#define PVM_ID_AA64MMFR1_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64MMFR1_HADBS) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_VMIDBITS) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_HPD) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_PAN) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_SPECSEI) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_ETS) \ + ) + +/* + * Allow for protected VMs: + * - Common not Private translations + * - User Access Override + * - IESB bit in the SCTLR_ELx registers + * - Unaligned single-copy atomicity and atomic functions + * - ESR_ELx.EC value on an exception by read access to feature ID space + * - TTL field in address operations. + * - Break-before-make sequences when changing translation block size + * - E0PDx mechanism + */ +#define PVM_ID_AA64MMFR2_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64MMFR2_CNP) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_UAO) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_IESB) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_AT) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_IDS) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_TTL) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_BBM) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_E0PD) \ + ) + +/* + * No support for Scalable Vectors for protected VMs: + * Requires additional support from KVM, e.g., context-switching and + * trapping at EL2 + */ +#define PVM_ID_AA64ZFR0_ALLOW (0ULL) + +/* + * No support for debug, including breakpoints, and watchpoints for protected + * VMs: + * The Arm architecture mandates support for at least the Armv8 debug + * architecture, which would include at least 2 hardware breakpoints and + * watchpoints. Providing that support to protected guests adds + * considerable state and complexity. Therefore, the reserved value of 0 is + * used for debug-related fields. + */ +#define PVM_ID_AA64DFR0_ALLOW (0ULL) +#define PVM_ID_AA64DFR1_ALLOW (0ULL) + +/* + * No support for implementation defined features. + */ +#define PVM_ID_AA64AFR0_ALLOW (0ULL) +#define PVM_ID_AA64AFR1_ALLOW (0ULL) + +/* + * No restrictions on instructions implemented in AArch64. + */ +#define PVM_ID_AA64ISAR0_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64ISAR0_AES) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_SHA1) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_SHA2) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_CRC32) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_ATOMICS) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_RDM) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_SHA3) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_SM3) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_SM4) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_DP) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_FHM) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_TS) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_TLB) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_RNDR) \ + ) + +#define PVM_ID_AA64ISAR1_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64ISAR1_DPB) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_APA) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_API) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_JSCVT) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_FCMA) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_LRCPC) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_GPA) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_GPI) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_FRINTTS) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_SB) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_SPECRES) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_BF16) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_DGH) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_I8MM) \ + ) + +#endif /* __ARM64_KVM_FIXED_CONFIG_H__ */ diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h index 657d0c94cf82..5afd14ab15b9 100644 --- a/arch/arm64/include/asm/kvm_hyp.h +++ b/arch/arm64/include/asm/kvm_hyp.h @@ -115,7 +115,12 @@ int __pkvm_init(phys_addr_t phys, unsigned long size, unsigned long nr_cpus, void __noreturn __host_enter(struct kvm_cpu_context *host_ctxt); #endif +extern u64 kvm_nvhe_sym(id_aa64pfr0_el1_sys_val); +extern u64 kvm_nvhe_sym(id_aa64pfr1_el1_sys_val); +extern u64 kvm_nvhe_sym(id_aa64isar0_el1_sys_val); +extern u64 kvm_nvhe_sym(id_aa64isar1_el1_sys_val); extern u64 kvm_nvhe_sym(id_aa64mmfr0_el1_sys_val); extern u64 kvm_nvhe_sym(id_aa64mmfr1_el1_sys_val); +extern u64 kvm_nvhe_sym(id_aa64mmfr2_el1_sys_val); #endif /* __ARM64_KVM_HYP_H__ */ diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index fe102cd2e518..6aa7b0c5bf21 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -1802,8 +1802,13 @@ static int kvm_hyp_init_protection(u32 hyp_va_bits) void *addr = phys_to_virt(hyp_mem_base); int ret; + kvm_nvhe_sym(id_aa64pfr0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1); + kvm_nvhe_sym(id_aa64pfr1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1); + kvm_nvhe_sym(id_aa64isar0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR0_EL1); + kvm_nvhe_sym(id_aa64isar1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR1_EL1); kvm_nvhe_sym(id_aa64mmfr0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); kvm_nvhe_sym(id_aa64mmfr1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1); + kvm_nvhe_sym(id_aa64mmfr2_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR2_EL1); ret = create_hyp_mappings(addr, addr + hyp_mem_size, PAGE_HYP); if (ret) diff --git a/arch/arm64/kvm/hyp/include/nvhe/sys_regs.h b/arch/arm64/kvm/hyp/include/nvhe/sys_regs.h new file mode 100644 index 000000000000..3288128738aa --- /dev/null +++ b/arch/arm64/kvm/hyp/include/nvhe/sys_regs.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2021 Google LLC + * Author: Fuad Tabba + */ + +#ifndef __ARM64_KVM_NVHE_SYS_REGS_H__ +#define __ARM64_KVM_NVHE_SYS_REGS_H__ + +#include + +u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu); +u64 get_pvm_id_aa64pfr1(const struct kvm_vcpu *vcpu); +u64 get_pvm_id_aa64zfr0(const struct kvm_vcpu *vcpu); +u64 get_pvm_id_aa64dfr0(const struct kvm_vcpu *vcpu); +u64 get_pvm_id_aa64dfr1(const struct kvm_vcpu *vcpu); +u64 get_pvm_id_aa64afr0(const struct kvm_vcpu *vcpu); +u64 get_pvm_id_aa64afr1(const struct kvm_vcpu *vcpu); +u64 get_pvm_id_aa64isar0(const struct kvm_vcpu *vcpu); +u64 get_pvm_id_aa64isar1(const struct kvm_vcpu *vcpu); +u64 get_pvm_id_aa64mmfr0(const struct kvm_vcpu *vcpu); +u64 get_pvm_id_aa64mmfr1(const struct kvm_vcpu *vcpu); +u64 get_pvm_id_aa64mmfr2(const struct kvm_vcpu *vcpu); + +bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code); +int kvm_check_pvm_sysreg_table(void); +void inject_undef64(struct kvm_vcpu *vcpu); + +#endif /* __ARM64_KVM_NVHE_SYS_REGS_H__ */ diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile index 8d741f71377f..0bbe37a18d5d 100644 --- a/arch/arm64/kvm/hyp/nvhe/Makefile +++ b/arch/arm64/kvm/hyp/nvhe/Makefile @@ -14,7 +14,7 @@ lib-objs := $(addprefix ../../../lib/, $(lib-objs)) obj-y := timer-sr.o sysreg-sr.o debug-sr.o switch.o tlb.o hyp-init.o host.o \ hyp-main.o hyp-smp.o psci-relay.o early_alloc.o stub.o page_alloc.o \ - cache.o setup.o mm.o mem_protect.o + cache.o setup.o mm.o mem_protect.o sys_regs.o obj-y += ../vgic-v3-sr.o ../aarch32.o ../vgic-v2-cpuif-proxy.o ../entry.o \ ../fpsimd.o ../hyp-entry.o ../exception.o ../pgtable.o obj-y += $(lib-objs) diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c index 57c27846320f..c85ff64e63f2 100644 --- a/arch/arm64/kvm/hyp/nvhe/setup.c +++ b/arch/arm64/kvm/hyp/nvhe/setup.c @@ -14,6 +14,7 @@ #include #include #include +#include #include struct hyp_pool hpool; @@ -260,6 +261,8 @@ int __pkvm_init(phys_addr_t phys, unsigned long size, unsigned long nr_cpus, void (*fn)(phys_addr_t params_pa, void *finalize_fn_va); int ret; + BUG_ON(kvm_check_pvm_sysreg_table()); + if (!PAGE_ALIGNED(phys) || !PAGE_ALIGNED(size)) return -EINVAL; diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index 8c9a0464be00..17d1a9512507 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -28,6 +28,7 @@ #include #include +#include /* Non-VHE specific context */ DEFINE_PER_CPU(struct kvm_host_data, kvm_host_data); diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c new file mode 100644 index 000000000000..6e3ea49af302 --- /dev/null +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c @@ -0,0 +1,498 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2021 Google LLC + * Author: Fuad Tabba + */ + +#include +#include +#include + +#include + +#include + +#include "../../sys_regs.h" + +/* + * Copies of the host's CPU features registers holding sanitized values at hyp. + */ +u64 id_aa64pfr0_el1_sys_val; +u64 id_aa64pfr1_el1_sys_val; +u64 id_aa64isar0_el1_sys_val; +u64 id_aa64isar1_el1_sys_val; +u64 id_aa64mmfr2_el1_sys_val; + +/* + * Inject an unknown/undefined exception to an AArch64 guest while most of its + * sysregs are live. + */ +void inject_undef64(struct kvm_vcpu *vcpu) +{ + u32 esr = (ESR_ELx_EC_UNKNOWN << ESR_ELx_EC_SHIFT); + + *vcpu_pc(vcpu) = read_sysreg_el2(SYS_ELR); + *vcpu_cpsr(vcpu) = read_sysreg_el2(SYS_SPSR); + + vcpu->arch.flags |= (KVM_ARM64_EXCEPT_AA64_EL1 | + KVM_ARM64_EXCEPT_AA64_ELx_SYNC | + KVM_ARM64_PENDING_EXCEPTION); + + __kvm_adjust_pc(vcpu); + + write_sysreg_el1(esr, SYS_ESR); + write_sysreg_el1(read_sysreg_el2(SYS_ELR), SYS_ELR); + write_sysreg_el2(*vcpu_pc(vcpu), SYS_ELR); + write_sysreg_el2(*vcpu_cpsr(vcpu), SYS_SPSR); +} + +/* + * Returns the restricted features values of the feature register based on the + * limitations in restrict_fields. + * A feature id field value of 0b0000 does not impose any restrictions. + * Note: Use only for unsigned feature field values. + */ +static u64 get_restricted_features_unsigned(u64 sys_reg_val, + u64 restrict_fields) +{ + u64 value = 0UL; + u64 mask = GENMASK_ULL(ARM64_FEATURE_FIELD_BITS - 1, 0); + + /* + * According to the Arm Architecture Reference Manual, feature fields + * use increasing values to indicate increases in functionality. + * Iterate over the restricted feature fields and calculate the minimum + * unsigned value between the one supported by the system, and what the + * value is being restricted to. + */ + while (sys_reg_val && restrict_fields) { + value |= min(sys_reg_val & mask, restrict_fields & mask); + sys_reg_val &= ~mask; + restrict_fields &= ~mask; + mask <<= ARM64_FEATURE_FIELD_BITS; + } + + return value; +} + +/* + * Functions that return the value of feature id registers for protected VMs + * based on allowed features, system features, and KVM support. + */ + +u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu) +{ + const struct kvm *kvm = (const struct kvm *)kern_hyp_va(vcpu->kvm); + u64 set_mask = 0; + u64 allow_mask = PVM_ID_AA64PFR0_ALLOW; + + if (!vcpu_has_sve(vcpu)) + allow_mask &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_SVE); + + set_mask |= get_restricted_features_unsigned(id_aa64pfr0_el1_sys_val, + PVM_ID_AA64PFR0_RESTRICT_UNSIGNED); + + /* Spectre and Meltdown mitigation in KVM */ + set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV2), + (u64)kvm->arch.pfr0_csv2); + set_mask |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV3), + (u64)kvm->arch.pfr0_csv3); + + return (id_aa64pfr0_el1_sys_val & allow_mask) | set_mask; +} + +u64 get_pvm_id_aa64pfr1(const struct kvm_vcpu *vcpu) +{ + const struct kvm *kvm = (const struct kvm *)kern_hyp_va(vcpu->kvm); + u64 allow_mask = PVM_ID_AA64PFR1_ALLOW; + + if (!kvm_has_mte(kvm)) + allow_mask &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_MTE); + + return id_aa64pfr1_el1_sys_val & allow_mask; +} + +u64 get_pvm_id_aa64zfr0(const struct kvm_vcpu *vcpu) +{ + /* + * No support for Scalable Vectors, therefore, hyp has no sanitized + * copy of the feature id register. + */ + BUILD_BUG_ON(PVM_ID_AA64ZFR0_ALLOW != 0ULL); + return 0; +} + +u64 get_pvm_id_aa64dfr0(const struct kvm_vcpu *vcpu) +{ + /* + * No support for debug, including breakpoints, and watchpoints, + * therefore, pKVM has no sanitized copy of the feature id register. + */ + BUILD_BUG_ON(PVM_ID_AA64DFR0_ALLOW != 0ULL); + return 0; +} + +u64 get_pvm_id_aa64dfr1(const struct kvm_vcpu *vcpu) +{ + /* + * No support for debug, therefore, hyp has no sanitized copy of the + * feature id register. + */ + BUILD_BUG_ON(PVM_ID_AA64DFR1_ALLOW != 0ULL); + return 0; +} + +u64 get_pvm_id_aa64afr0(const struct kvm_vcpu *vcpu) +{ + /* + * No support for implementation defined features, therefore, hyp has no + * sanitized copy of the feature id register. + */ + BUILD_BUG_ON(PVM_ID_AA64AFR0_ALLOW != 0ULL); + return 0; +} + +u64 get_pvm_id_aa64afr1(const struct kvm_vcpu *vcpu) +{ + /* + * No support for implementation defined features, therefore, hyp has no + * sanitized copy of the feature id register. + */ + BUILD_BUG_ON(PVM_ID_AA64AFR1_ALLOW != 0ULL); + return 0; +} + +u64 get_pvm_id_aa64isar0(const struct kvm_vcpu *vcpu) +{ + return id_aa64isar0_el1_sys_val & PVM_ID_AA64ISAR0_ALLOW; +} + +u64 get_pvm_id_aa64isar1(const struct kvm_vcpu *vcpu) +{ + u64 allow_mask = PVM_ID_AA64ISAR1_ALLOW; + + if (!vcpu_has_ptrauth(vcpu)) + allow_mask &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_APA) | + ARM64_FEATURE_MASK(ID_AA64ISAR1_API) | + ARM64_FEATURE_MASK(ID_AA64ISAR1_GPA) | + ARM64_FEATURE_MASK(ID_AA64ISAR1_GPI)); + + return id_aa64isar1_el1_sys_val & allow_mask; +} + +u64 get_pvm_id_aa64mmfr0(const struct kvm_vcpu *vcpu) +{ + u64 set_mask; + + set_mask = get_restricted_features_unsigned(id_aa64mmfr0_el1_sys_val, + PVM_ID_AA64MMFR0_RESTRICT_UNSIGNED); + + return (id_aa64mmfr0_el1_sys_val & PVM_ID_AA64MMFR0_ALLOW) | set_mask; +} + +u64 get_pvm_id_aa64mmfr1(const struct kvm_vcpu *vcpu) +{ + return id_aa64mmfr1_el1_sys_val & PVM_ID_AA64MMFR1_ALLOW; +} + +u64 get_pvm_id_aa64mmfr2(const struct kvm_vcpu *vcpu) +{ + return id_aa64mmfr2_el1_sys_val & PVM_ID_AA64MMFR2_ALLOW; +} + +/* Read a sanitized cpufeature ID register by its sys_reg_desc. */ +static u64 read_id_reg(const struct kvm_vcpu *vcpu, + struct sys_reg_desc const *r) +{ + u32 id = reg_to_encoding(r); + + switch (id) { + case SYS_ID_AA64PFR0_EL1: + return get_pvm_id_aa64pfr0(vcpu); + case SYS_ID_AA64PFR1_EL1: + return get_pvm_id_aa64pfr1(vcpu); + case SYS_ID_AA64ZFR0_EL1: + return get_pvm_id_aa64zfr0(vcpu); + case SYS_ID_AA64DFR0_EL1: + return get_pvm_id_aa64dfr0(vcpu); + case SYS_ID_AA64DFR1_EL1: + return get_pvm_id_aa64dfr1(vcpu); + case SYS_ID_AA64AFR0_EL1: + return get_pvm_id_aa64afr0(vcpu); + case SYS_ID_AA64AFR1_EL1: + return get_pvm_id_aa64afr1(vcpu); + case SYS_ID_AA64ISAR0_EL1: + return get_pvm_id_aa64isar0(vcpu); + case SYS_ID_AA64ISAR1_EL1: + return get_pvm_id_aa64isar1(vcpu); + case SYS_ID_AA64MMFR0_EL1: + return get_pvm_id_aa64mmfr0(vcpu); + case SYS_ID_AA64MMFR1_EL1: + return get_pvm_id_aa64mmfr1(vcpu); + case SYS_ID_AA64MMFR2_EL1: + return get_pvm_id_aa64mmfr2(vcpu); + default: + /* + * Should never happen because all cases are covered in + * pvm_sys_reg_descs[]. + */ + WARN_ON(1); + break; + } + + return 0; +} + +/* + * Accessor for AArch32 feature id registers. + * + * The value of these registers is "unknown" according to the spec if AArch32 + * isn't supported. + */ +static bool pvm_access_id_aarch32(struct kvm_vcpu *vcpu, + struct sys_reg_params *p, + const struct sys_reg_desc *r) +{ + if (p->is_write) { + inject_undef64(vcpu); + return false; + } + + /* + * No support for AArch32 guests, therefore, pKVM has no sanitized copy + * of AArch32 feature id registers. + */ + BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1), + PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) > ID_AA64PFR0_ELx_64BIT_ONLY); + + /* Use 0 for architecturally "unknown" values. */ + p->regval = 0; + return true; +} + +/* + * Accessor for AArch64 feature id registers. + * + * If access is allowed, set the regval to the protected VM's view of the + * register and return true. + * Otherwise, inject an undefined exception and return false. + */ +static bool pvm_access_id_aarch64(struct kvm_vcpu *vcpu, + struct sys_reg_params *p, + const struct sys_reg_desc *r) +{ + if (p->is_write) { + inject_undef64(vcpu); + return false; + } + + p->regval = read_id_reg(vcpu, r); + return true; +} + +/* Mark the specified system register as an AArch32 feature id register. */ +#define AARCH32(REG) { SYS_DESC(REG), .access = pvm_access_id_aarch32 } + +/* Mark the specified system register as an AArch64 feature id register. */ +#define AARCH64(REG) { SYS_DESC(REG), .access = pvm_access_id_aarch64 } + +/* Mark the specified system register as not being handled in hyp. */ +#define HOST_HANDLED(REG) { SYS_DESC(REG), .access = NULL } + +/* + * Architected system registers. + * Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2 + * + * NOTE: Anything not explicitly listed here is *restricted by default*, i.e., + * it will lead to injecting an exception into the guest. + */ +static const struct sys_reg_desc pvm_sys_reg_descs[] = { + /* Cache maintenance by set/way operations are restricted. */ + + /* Debug and Trace Registers are restricted. */ + + /* AArch64 mappings of the AArch32 ID registers */ + /* CRm=1 */ + AARCH32(SYS_ID_PFR0_EL1), + AARCH32(SYS_ID_PFR1_EL1), + AARCH32(SYS_ID_DFR0_EL1), + AARCH32(SYS_ID_AFR0_EL1), + AARCH32(SYS_ID_MMFR0_EL1), + AARCH32(SYS_ID_MMFR1_EL1), + AARCH32(SYS_ID_MMFR2_EL1), + AARCH32(SYS_ID_MMFR3_EL1), + + /* CRm=2 */ + AARCH32(SYS_ID_ISAR0_EL1), + AARCH32(SYS_ID_ISAR1_EL1), + AARCH32(SYS_ID_ISAR2_EL1), + AARCH32(SYS_ID_ISAR3_EL1), + AARCH32(SYS_ID_ISAR4_EL1), + AARCH32(SYS_ID_ISAR5_EL1), + AARCH32(SYS_ID_MMFR4_EL1), + AARCH32(SYS_ID_ISAR6_EL1), + + /* CRm=3 */ + AARCH32(SYS_MVFR0_EL1), + AARCH32(SYS_MVFR1_EL1), + AARCH32(SYS_MVFR2_EL1), + AARCH32(SYS_ID_PFR2_EL1), + AARCH32(SYS_ID_DFR1_EL1), + AARCH32(SYS_ID_MMFR5_EL1), + + /* AArch64 ID registers */ + /* CRm=4 */ + AARCH64(SYS_ID_AA64PFR0_EL1), + AARCH64(SYS_ID_AA64PFR1_EL1), + AARCH64(SYS_ID_AA64ZFR0_EL1), + AARCH64(SYS_ID_AA64DFR0_EL1), + AARCH64(SYS_ID_AA64DFR1_EL1), + AARCH64(SYS_ID_AA64AFR0_EL1), + AARCH64(SYS_ID_AA64AFR1_EL1), + AARCH64(SYS_ID_AA64ISAR0_EL1), + AARCH64(SYS_ID_AA64ISAR1_EL1), + AARCH64(SYS_ID_AA64MMFR0_EL1), + AARCH64(SYS_ID_AA64MMFR1_EL1), + AARCH64(SYS_ID_AA64MMFR2_EL1), + + HOST_HANDLED(SYS_SCTLR_EL1), + HOST_HANDLED(SYS_ACTLR_EL1), + HOST_HANDLED(SYS_CPACR_EL1), + + HOST_HANDLED(SYS_RGSR_EL1), + HOST_HANDLED(SYS_GCR_EL1), + + /* Scalable Vector Registers are restricted. */ + + HOST_HANDLED(SYS_TTBR0_EL1), + HOST_HANDLED(SYS_TTBR1_EL1), + HOST_HANDLED(SYS_TCR_EL1), + + HOST_HANDLED(SYS_APIAKEYLO_EL1), + HOST_HANDLED(SYS_APIAKEYHI_EL1), + HOST_HANDLED(SYS_APIBKEYLO_EL1), + HOST_HANDLED(SYS_APIBKEYHI_EL1), + HOST_HANDLED(SYS_APDAKEYLO_EL1), + HOST_HANDLED(SYS_APDAKEYHI_EL1), + HOST_HANDLED(SYS_APDBKEYLO_EL1), + HOST_HANDLED(SYS_APDBKEYHI_EL1), + HOST_HANDLED(SYS_APGAKEYLO_EL1), + HOST_HANDLED(SYS_APGAKEYHI_EL1), + + HOST_HANDLED(SYS_AFSR0_EL1), + HOST_HANDLED(SYS_AFSR1_EL1), + HOST_HANDLED(SYS_ESR_EL1), + + HOST_HANDLED(SYS_ERRIDR_EL1), + HOST_HANDLED(SYS_ERRSELR_EL1), + HOST_HANDLED(SYS_ERXFR_EL1), + HOST_HANDLED(SYS_ERXCTLR_EL1), + HOST_HANDLED(SYS_ERXSTATUS_EL1), + HOST_HANDLED(SYS_ERXADDR_EL1), + HOST_HANDLED(SYS_ERXMISC0_EL1), + HOST_HANDLED(SYS_ERXMISC1_EL1), + + HOST_HANDLED(SYS_TFSR_EL1), + HOST_HANDLED(SYS_TFSRE0_EL1), + + HOST_HANDLED(SYS_FAR_EL1), + HOST_HANDLED(SYS_PAR_EL1), + + /* Performance Monitoring Registers are restricted. */ + + HOST_HANDLED(SYS_MAIR_EL1), + HOST_HANDLED(SYS_AMAIR_EL1), + + /* Limited Ordering Regions Registers are restricted. */ + + HOST_HANDLED(SYS_VBAR_EL1), + HOST_HANDLED(SYS_DISR_EL1), + + /* GIC CPU Interface registers are restricted. */ + + HOST_HANDLED(SYS_CONTEXTIDR_EL1), + HOST_HANDLED(SYS_TPIDR_EL1), + + HOST_HANDLED(SYS_SCXTNUM_EL1), + + HOST_HANDLED(SYS_CNTKCTL_EL1), + + HOST_HANDLED(SYS_CCSIDR_EL1), + HOST_HANDLED(SYS_CLIDR_EL1), + HOST_HANDLED(SYS_CSSELR_EL1), + HOST_HANDLED(SYS_CTR_EL0), + + /* Performance Monitoring Registers are restricted. */ + + HOST_HANDLED(SYS_TPIDR_EL0), + HOST_HANDLED(SYS_TPIDRRO_EL0), + + HOST_HANDLED(SYS_SCXTNUM_EL0), + + /* Activity Monitoring Registers are restricted. */ + + HOST_HANDLED(SYS_CNTP_TVAL_EL0), + HOST_HANDLED(SYS_CNTP_CTL_EL0), + HOST_HANDLED(SYS_CNTP_CVAL_EL0), + + /* Performance Monitoring Registers are restricted. */ + + HOST_HANDLED(SYS_DACR32_EL2), + HOST_HANDLED(SYS_IFSR32_EL2), + HOST_HANDLED(SYS_FPEXC32_EL2), +}; + +/* + * Checks that the sysreg table is unique and in-order. + * + * Returns 0 if the table is consistent, or 1 otherwise. + */ +int kvm_check_pvm_sysreg_table(void) +{ + unsigned int i; + + for (i = 1; i < ARRAY_SIZE(pvm_sys_reg_descs); i++) { + if (cmp_sys_reg(&pvm_sys_reg_descs[i-1], &pvm_sys_reg_descs[i]) >= 0) + return 1; + } + + return 0; +} + +/* + * Handler for protected VM MSR, MRS or System instruction execution. + * + * Returns true if the hypervisor has handled the exit, and control should go + * back to the guest, or false if it hasn't, to be handled by the host. + */ +bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + const struct sys_reg_desc *r; + struct sys_reg_params params; + unsigned long esr = kvm_vcpu_get_esr(vcpu); + int Rt = kvm_vcpu_sys_get_rt(vcpu); + + params = esr_sys64_to_params(esr); + params.regval = vcpu_get_reg(vcpu, Rt); + + r = find_reg(¶ms, pvm_sys_reg_descs, ARRAY_SIZE(pvm_sys_reg_descs)); + + /* Undefined (RESTRICTED). */ + if (r == NULL) { + inject_undef64(vcpu); + return true; + } + + /* Handled by the host (HOST_HANDLED) */ + if (r->access == NULL) + return false; + + /* Handled by hyp: skip instruction if instructed to do so. */ + if (r->access(vcpu, ¶ms, r)) + __kvm_skip_instr(vcpu); + + if (!params.is_write) + vcpu_set_reg(vcpu, Rt, params.regval); + + return true; +} -- cgit From 2a0c343386ae1a6826e1b9d751bfc14f4711c2de Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Sun, 10 Oct 2021 15:56:33 +0100 Subject: KVM: arm64: Initialize trap registers for protected VMs Protected VMs have more restricted features that need to be trapped. Moreover, the host should not be trusted to set the appropriate trapping registers and their values. Initialize the trapping registers, i.e., hcr_el2, mdcr_el2, and cptr_el2 at EL2 for protected guests, based on the values of the guest's feature id registers. No functional change intended as trap handlers introduced in the previous patch are still not hooked in to the guest exit handlers. Reviewed-by: Andrew Jones Signed-off-by: Fuad Tabba Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010145636.1950948-9-tabba@google.com --- arch/arm64/include/asm/kvm_asm.h | 1 + arch/arm64/include/asm/kvm_host.h | 2 + arch/arm64/kvm/arm.c | 8 ++ arch/arm64/kvm/hyp/include/nvhe/trap_handler.h | 2 + arch/arm64/kvm/hyp/nvhe/Makefile | 2 +- arch/arm64/kvm/hyp/nvhe/hyp-main.c | 9 ++ arch/arm64/kvm/hyp/nvhe/pkvm.c | 186 +++++++++++++++++++++++++ 7 files changed, 209 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/kvm/hyp/nvhe/pkvm.c diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index e86045ac43ba..a460e1243cef 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -64,6 +64,7 @@ #define __KVM_HOST_SMCCC_FUNC___pkvm_cpu_set_vector 18 #define __KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize 19 #define __KVM_HOST_SMCCC_FUNC___kvm_adjust_pc 20 +#define __KVM_HOST_SMCCC_FUNC___pkvm_vcpu_init_traps 21 #ifndef __ASSEMBLY__ diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index f8be56d5342b..4a323aa27a6b 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -780,6 +780,8 @@ static inline bool kvm_vm_is_protected(struct kvm *kvm) return false; } +void kvm_init_protected_traps(struct kvm_vcpu *vcpu); + int kvm_arm_vcpu_finalize(struct kvm_vcpu *vcpu, int feature); bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu); diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 6aa7b0c5bf21..3af6d59d1919 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -620,6 +620,14 @@ static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu) ret = kvm_arm_pmu_v3_enable(vcpu); + /* + * Initialize traps for protected VMs. + * NOTE: Move to run in EL2 directly, rather than via a hypercall, once + * the code is in place for first run initialization at EL2. + */ + if (kvm_vm_is_protected(kvm)) + kvm_call_hyp_nvhe(__pkvm_vcpu_init_traps, vcpu); + return ret; } diff --git a/arch/arm64/kvm/hyp/include/nvhe/trap_handler.h b/arch/arm64/kvm/hyp/include/nvhe/trap_handler.h index 1e6d995968a1..45a84f0ade04 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/trap_handler.h +++ b/arch/arm64/kvm/hyp/include/nvhe/trap_handler.h @@ -15,4 +15,6 @@ #define DECLARE_REG(type, name, ctxt, reg) \ type name = (type)cpu_reg(ctxt, (reg)) +void __pkvm_vcpu_init_traps(struct kvm_vcpu *vcpu); + #endif /* __ARM64_KVM_NVHE_TRAP_HANDLER_H__ */ diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile index 0bbe37a18d5d..c3c11974fa3b 100644 --- a/arch/arm64/kvm/hyp/nvhe/Makefile +++ b/arch/arm64/kvm/hyp/nvhe/Makefile @@ -14,7 +14,7 @@ lib-objs := $(addprefix ../../../lib/, $(lib-objs)) obj-y := timer-sr.o sysreg-sr.o debug-sr.o switch.o tlb.o hyp-init.o host.o \ hyp-main.o hyp-smp.o psci-relay.o early_alloc.o stub.o page_alloc.o \ - cache.o setup.o mm.o mem_protect.o sys_regs.o + cache.o setup.o mm.o mem_protect.o sys_regs.o pkvm.o obj-y += ../vgic-v3-sr.o ../aarch32.o ../vgic-v2-cpuif-proxy.o ../entry.o \ ../fpsimd.o ../hyp-entry.o ../exception.o ../pgtable.o obj-y += $(lib-objs) diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c index 8ca1104f4774..a6303db09cd6 100644 --- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c +++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c @@ -160,6 +160,14 @@ static void handle___pkvm_prot_finalize(struct kvm_cpu_context *host_ctxt) { cpu_reg(host_ctxt, 1) = __pkvm_prot_finalize(); } + +static void handle___pkvm_vcpu_init_traps(struct kvm_cpu_context *host_ctxt) +{ + DECLARE_REG(struct kvm_vcpu *, vcpu, host_ctxt, 1); + + __pkvm_vcpu_init_traps(kern_hyp_va(vcpu)); +} + typedef void (*hcall_t)(struct kvm_cpu_context *); #define HANDLE_FUNC(x) [__KVM_HOST_SMCCC_FUNC_##x] = (hcall_t)handle_##x @@ -185,6 +193,7 @@ static const hcall_t host_hcall[] = { HANDLE_FUNC(__pkvm_host_share_hyp), HANDLE_FUNC(__pkvm_create_private_mapping), HANDLE_FUNC(__pkvm_prot_finalize), + HANDLE_FUNC(__pkvm_vcpu_init_traps), }; static void handle_host_hcall(struct kvm_cpu_context *host_ctxt) diff --git a/arch/arm64/kvm/hyp/nvhe/pkvm.c b/arch/arm64/kvm/hyp/nvhe/pkvm.c new file mode 100644 index 000000000000..633547cc1033 --- /dev/null +++ b/arch/arm64/kvm/hyp/nvhe/pkvm.c @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2021 Google LLC + * Author: Fuad Tabba + */ + +#include +#include +#include +#include +#include + +/* + * Set trap register values based on features in ID_AA64PFR0. + */ +static void pvm_init_traps_aa64pfr0(struct kvm_vcpu *vcpu) +{ + const u64 feature_ids = get_pvm_id_aa64pfr0(vcpu); + u64 hcr_set = HCR_RW; + u64 hcr_clear = 0; + u64 cptr_set = 0; + + /* Protected KVM does not support AArch32 guests. */ + BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL0), + PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) != ID_AA64PFR0_ELx_64BIT_ONLY); + BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1), + PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) != ID_AA64PFR0_ELx_64BIT_ONLY); + + /* + * Linux guests assume support for floating-point and Advanced SIMD. Do + * not change the trapping behavior for these from the KVM default. + */ + BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_FP), + PVM_ID_AA64PFR0_ALLOW)); + BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_ASIMD), + PVM_ID_AA64PFR0_ALLOW)); + + /* Trap RAS unless all current versions are supported */ + if (FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_RAS), feature_ids) < + ID_AA64PFR0_RAS_V1P1) { + hcr_set |= HCR_TERR | HCR_TEA; + hcr_clear |= HCR_FIEN; + } + + /* Trap AMU */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_AMU), feature_ids)) { + hcr_clear |= HCR_AMVOFFEN; + cptr_set |= CPTR_EL2_TAM; + } + + /* Trap SVE */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_SVE), feature_ids)) + cptr_set |= CPTR_EL2_TZ; + + vcpu->arch.hcr_el2 |= hcr_set; + vcpu->arch.hcr_el2 &= ~hcr_clear; + vcpu->arch.cptr_el2 |= cptr_set; +} + +/* + * Set trap register values based on features in ID_AA64PFR1. + */ +static void pvm_init_traps_aa64pfr1(struct kvm_vcpu *vcpu) +{ + const u64 feature_ids = get_pvm_id_aa64pfr1(vcpu); + u64 hcr_set = 0; + u64 hcr_clear = 0; + + /* Memory Tagging: Trap and Treat as Untagged if not supported. */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR1_MTE), feature_ids)) { + hcr_set |= HCR_TID5; + hcr_clear |= HCR_DCT | HCR_ATA; + } + + vcpu->arch.hcr_el2 |= hcr_set; + vcpu->arch.hcr_el2 &= ~hcr_clear; +} + +/* + * Set trap register values based on features in ID_AA64DFR0. + */ +static void pvm_init_traps_aa64dfr0(struct kvm_vcpu *vcpu) +{ + const u64 feature_ids = get_pvm_id_aa64dfr0(vcpu); + u64 mdcr_set = 0; + u64 mdcr_clear = 0; + u64 cptr_set = 0; + + /* Trap/constrain PMU */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_PMUVER), feature_ids)) { + mdcr_set |= MDCR_EL2_TPM | MDCR_EL2_TPMCR; + mdcr_clear |= MDCR_EL2_HPME | MDCR_EL2_MTPME | + MDCR_EL2_HPMN_MASK; + } + + /* Trap Debug */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_DEBUGVER), feature_ids)) + mdcr_set |= MDCR_EL2_TDRA | MDCR_EL2_TDA | MDCR_EL2_TDE; + + /* Trap OS Double Lock */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_DOUBLELOCK), feature_ids)) + mdcr_set |= MDCR_EL2_TDOSA; + + /* Trap SPE */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_PMSVER), feature_ids)) { + mdcr_set |= MDCR_EL2_TPMS; + mdcr_clear |= MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT; + } + + /* Trap Trace Filter */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_TRACE_FILT), feature_ids)) + mdcr_set |= MDCR_EL2_TTRF; + + /* Trap Trace */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_TRACEVER), feature_ids)) + cptr_set |= CPTR_EL2_TTA; + + vcpu->arch.mdcr_el2 |= mdcr_set; + vcpu->arch.mdcr_el2 &= ~mdcr_clear; + vcpu->arch.cptr_el2 |= cptr_set; +} + +/* + * Set trap register values based on features in ID_AA64MMFR0. + */ +static void pvm_init_traps_aa64mmfr0(struct kvm_vcpu *vcpu) +{ + const u64 feature_ids = get_pvm_id_aa64mmfr0(vcpu); + u64 mdcr_set = 0; + + /* Trap Debug Communications Channel registers */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64MMFR0_FGT), feature_ids)) + mdcr_set |= MDCR_EL2_TDCC; + + vcpu->arch.mdcr_el2 |= mdcr_set; +} + +/* + * Set trap register values based on features in ID_AA64MMFR1. + */ +static void pvm_init_traps_aa64mmfr1(struct kvm_vcpu *vcpu) +{ + const u64 feature_ids = get_pvm_id_aa64mmfr1(vcpu); + u64 hcr_set = 0; + + /* Trap LOR */ + if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64MMFR1_LOR), feature_ids)) + hcr_set |= HCR_TLOR; + + vcpu->arch.hcr_el2 |= hcr_set; +} + +/* + * Set baseline trap register values. + */ +static void pvm_init_trap_regs(struct kvm_vcpu *vcpu) +{ + const u64 hcr_trap_feat_regs = HCR_TID3; + const u64 hcr_trap_impdef = HCR_TACR | HCR_TIDCP | HCR_TID1; + + /* + * Always trap: + * - Feature id registers: to control features exposed to guests + * - Implementation-defined features + */ + vcpu->arch.hcr_el2 |= hcr_trap_feat_regs | hcr_trap_impdef; + + /* Clear res0 and set res1 bits to trap potential new features. */ + vcpu->arch.hcr_el2 &= ~(HCR_RES0); + vcpu->arch.mdcr_el2 &= ~(MDCR_EL2_RES0); + vcpu->arch.cptr_el2 |= CPTR_NVHE_EL2_RES1; + vcpu->arch.cptr_el2 &= ~(CPTR_NVHE_EL2_RES0); +} + +/* + * Initialize trap register values for protected VMs. + */ +void __pkvm_vcpu_init_traps(struct kvm_vcpu *vcpu) +{ + pvm_init_trap_regs(vcpu); + pvm_init_traps_aa64pfr0(vcpu); + pvm_init_traps_aa64pfr1(vcpu); + pvm_init_traps_aa64dfr0(vcpu); + pvm_init_traps_aa64mmfr0(vcpu); + pvm_init_traps_aa64mmfr1(vcpu); +} -- cgit From 72e1be120eaaf82a58c81fcf173cdb1d7a5dcfbb Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Sun, 10 Oct 2021 15:56:34 +0100 Subject: KVM: arm64: Move sanitized copies of CPU features Move the sanitized copies of the CPU feature registers to the recently created sys_regs.c. This consolidates all copies in a more relevant file. No functional change intended. Acked-by: Will Deacon Signed-off-by: Fuad Tabba Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010145636.1950948-10-tabba@google.com --- arch/arm64/kvm/hyp/nvhe/mem_protect.c | 6 ------ arch/arm64/kvm/hyp/nvhe/sys_regs.c | 2 ++ 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c index 2a07d63b8498..f6d96e60b323 100644 --- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c +++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c @@ -25,12 +25,6 @@ struct host_kvm host_kvm; static struct hyp_pool host_s2_pool; -/* - * Copies of the host's CPU features registers holding sanitized values. - */ -u64 id_aa64mmfr0_el1_sys_val; -u64 id_aa64mmfr1_el1_sys_val; - const u8 pkvm_hyp_id = 1; static void *host_s2_zalloc_pages_exact(size_t size) diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c index 6e3ea49af302..6bde2dc5205c 100644 --- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c @@ -21,6 +21,8 @@ u64 id_aa64pfr0_el1_sys_val; u64 id_aa64pfr1_el1_sys_val; u64 id_aa64isar0_el1_sys_val; u64 id_aa64isar1_el1_sys_val; +u64 id_aa64mmfr0_el1_sys_val; +u64 id_aa64mmfr1_el1_sys_val; u64 id_aa64mmfr2_el1_sys_val; /* -- cgit From 1423afcb411780c7a6a68f801fdcfb6920ad6f06 Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Sun, 10 Oct 2021 15:56:35 +0100 Subject: KVM: arm64: Trap access to pVM restricted features Trap accesses to restricted features for VMs running in protected mode. Access to feature registers are emulated, and only supported features are exposed to protected VMs. Accesses to restricted registers as well as restricted instructions are trapped, and an undefined exception is injected into the protected guests, i.e., with EC = 0x0 (unknown reason). This EC is the one used, according to the Arm Architecture Reference Manual, for unallocated or undefined system registers or instructions. Only affects the functionality of protected VMs. Otherwise, should not affect non-protected VMs when KVM is running in protected mode. Signed-off-by: Fuad Tabba Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010145636.1950948-11-tabba@google.com --- arch/arm64/kvm/hyp/nvhe/switch.c | 57 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index 17d1a9512507..2c72c31e516e 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -159,6 +160,49 @@ static void __pmu_switch_to_host(struct kvm_cpu_context *host_ctxt) write_sysreg(pmu->events_host, pmcntenset_el0); } +/** + * Handler for protected VM restricted exceptions. + * + * Inject an undefined exception into the guest and return true to indicate that + * the hypervisor has handled the exit, and control should go back to the guest. + */ +static bool kvm_handle_pvm_restricted(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + inject_undef64(vcpu); + return true; +} + +/** + * Handler for protected VM MSR, MRS or System instruction execution in AArch64. + * + * Returns true if the hypervisor has handled the exit, and control should go + * back to the guest, or false if it hasn't. + */ +static bool kvm_handle_pvm_sys64(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + if (kvm_handle_pvm_sysreg(vcpu, exit_code)) + return true; + + return kvm_hyp_handle_sysreg(vcpu, exit_code); +} + +/** + * Handler for protected floating-point and Advanced SIMD accesses. + * + * Returns true if the hypervisor has handled the exit, and control should go + * back to the guest, or false if it hasn't. + */ +static bool kvm_handle_pvm_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + /* Linux guests assume support for floating-point and Advanced SIMD. */ + BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_FP), + PVM_ID_AA64PFR0_ALLOW)); + BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_ASIMD), + PVM_ID_AA64PFR0_ALLOW)); + + return kvm_hyp_handle_fpsimd(vcpu, exit_code); +} + static const exit_handler_fn hyp_exit_handlers[] = { [0 ... ESR_ELx_EC_MAX] = NULL, [ESR_ELx_EC_CP15_32] = kvm_hyp_handle_cp15_32, @@ -170,8 +214,21 @@ static const exit_handler_fn hyp_exit_handlers[] = { [ESR_ELx_EC_PAC] = kvm_hyp_handle_ptrauth, }; +static const exit_handler_fn pvm_exit_handlers[] = { + [0 ... ESR_ELx_EC_MAX] = NULL, + [ESR_ELx_EC_SYS64] = kvm_handle_pvm_sys64, + [ESR_ELx_EC_SVE] = kvm_handle_pvm_restricted, + [ESR_ELx_EC_FP_ASIMD] = kvm_handle_pvm_fpsimd, + [ESR_ELx_EC_IABT_LOW] = kvm_hyp_handle_iabt_low, + [ESR_ELx_EC_DABT_LOW] = kvm_hyp_handle_dabt_low, + [ESR_ELx_EC_PAC] = kvm_hyp_handle_ptrauth, +}; + static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm *kvm) { + if (unlikely(kvm_vm_is_protected(kvm))) + return pvm_exit_handlers; + return hyp_exit_handlers; } -- cgit From 5f39efc42052b042c4d7ba6fd77934e8de43e10c Mon Sep 17 00:00:00 2001 From: Fuad Tabba Date: Sun, 10 Oct 2021 15:56:36 +0100 Subject: KVM: arm64: Handle protected guests at 32 bits Protected KVM does not support protected AArch32 guests. However, it is possible for the guest to force run AArch32, potentially causing problems. Add an extra check so that if the hypervisor catches the guest doing that, it can prevent the guest from running again by resetting vcpu->arch.target and returning ARM_EXCEPTION_IL. If this were to happen, The VMM can try and fix it by re- initializing the vcpu with KVM_ARM_VCPU_INIT, however, this is likely not possible for protected VMs. Adapted from commit 22f553842b14 ("KVM: arm64: Handle Asymmetric AArch32 systems") Signed-off-by: Fuad Tabba Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010145636.1950948-12-tabba@google.com --- arch/arm64/kvm/hyp/nvhe/switch.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index 2c72c31e516e..f25b6353a598 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -232,6 +232,37 @@ static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm *kvm) return hyp_exit_handlers; } +/* + * Some guests (e.g., protected VMs) are not be allowed to run in AArch32. + * The ARMv8 architecture does not give the hypervisor a mechanism to prevent a + * guest from dropping to AArch32 EL0 if implemented by the CPU. If the + * hypervisor spots a guest in such a state ensure it is handled, and don't + * trust the host to spot or fix it. The check below is based on the one in + * kvm_arch_vcpu_ioctl_run(). + * + * Returns false if the guest ran in AArch32 when it shouldn't have, and + * thus should exit to the host, or true if a the guest run loop can continue. + */ +static bool handle_aarch32_guest(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + struct kvm *kvm = kern_hyp_va(vcpu->kvm); + + if (kvm_vm_is_protected(kvm) && vcpu_mode_is_32bit(vcpu)) { + /* + * As we have caught the guest red-handed, decide that it isn't + * fit for purpose anymore by making the vcpu invalid. The VMM + * can try and fix it by re-initializing the vcpu with + * KVM_ARM_VCPU_INIT, however, this is likely not possible for + * protected VMs. + */ + vcpu->arch.target = -1; + *exit_code = ARM_EXCEPTION_IL; + return false; + } + + return true; +} + /* Switch to the guest for legacy non-VHE systems */ int __kvm_vcpu_run(struct kvm_vcpu *vcpu) { @@ -294,6 +325,9 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu) /* Jump in the fire! */ exit_code = __guest_enter(vcpu); + if (unlikely(!handle_aarch32_guest(vcpu, &exit_code))) + break; + /* And we're baaack! */ } while (fixup_guest_exit(vcpu, &exit_code)); -- cgit From 53e8ce137f7b34bd7a54429d18e0d0e5f56f54e8 Mon Sep 17 00:00:00 2001 From: Alexandru Elisei Date: Mon, 11 Oct 2021 16:38:35 +0100 Subject: Documentation: admin-guide: Document side effects when pKVM is enabled Recent changes to KVM for arm64 has made it impossible for the host to hibernate or use kexec when protected mode is enabled via the kernel command line. There are people who rely on kexec (for example, developers who use kexec as a quick way to test a new kernel), let's document this change in behaviour, so it doesn't catch them by surprise and we have a place to point people to if it does. Signed-off-by: Alexandru Elisei Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211011153835.291147-1-alexandru.elisei@arm.com --- Documentation/admin-guide/kernel-parameters.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 91ba391f9b32..741e33fd444a 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -2372,7 +2372,9 @@ state is kept private from the host. Not valid if the kernel is running in EL2. - Defaults to VHE/nVHE based on hardware support. + Defaults to VHE/nVHE based on hardware support. Setting + mode to "protected" will disable kexec and hibernation + for the host. kvm-arm.vgic_v3_group0_trap= [KVM,ARM] Trap guest accesses to GICv3 group-0 -- cgit From 69adec18e94ff3ca20447916a3bd23ab1d06b878 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 12 Oct 2021 12:23:12 +0100 Subject: KVM: arm64: Fix reporting of endianess when the access originates at EL0 We currently check SCTLR_EL1.EE when computing the address of a faulting guest access. However, the fault could have occured at EL0, in which case the right bit to check would be SCTLR_EL1.E0E. This is pretty unlikely to cause any issue in practice: You'd have to have a guest with a LE EL1 and a BE EL0 (or the other way around), and have mapped a device into the EL0 page tables. Good luck with that! Signed-off-by: Marc Zyngier Reviewed-by: Andrew Jones Link: https://lore.kernel.org/r/20211012112312.1247467-1-maz@kernel.org --- arch/arm64/include/asm/kvm_emulate.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index fd418955e31e..f4871e47b2d0 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -396,7 +396,10 @@ static inline bool kvm_vcpu_is_be(struct kvm_vcpu *vcpu) if (vcpu_mode_is_32bit(vcpu)) return !!(*vcpu_cpsr(vcpu) & PSR_AA32_E_BIT); - return !!(vcpu_read_sys_reg(vcpu, SCTLR_EL1) & (1 << 25)); + if (vcpu_mode_priv(vcpu)) + return !!(vcpu_read_sys_reg(vcpu, SCTLR_EL1) & SCTLR_ELx_EE); + else + return !!(vcpu_read_sys_reg(vcpu, SCTLR_EL1) & SCTLR_EL1_E0E); } static inline unsigned long vcpu_data_guest_to_host(struct kvm_vcpu *vcpu, -- cgit From 562e530fd7707aad7fed953692d1835612238966 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sun, 10 Oct 2021 16:09:06 +0100 Subject: KVM: arm64: Force ID_AA64PFR0_EL1.GIC=1 when exposing a virtual GICv3 Until now, we always let ID_AA64PFR0_EL1.GIC reflect the value visible on the host, even if we were running a GICv2-enabled VM on a GICv3+compat host. That's fine, but we also now have the case of a host that does not expose ID_AA64PFR0_EL1.GIC==1 despite having a vGIC. Yes, this is confusing. Thank you M1. Let's go back to first principles and expose ID_AA64PFR0_EL1.GIC=1 when a GICv3 is exposed to the guest. This also hides a GICv4.1 CPU interface from the guest which has no business knowing about the v4.1 extension. Reviewed-by: Alexandru Elisei Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010150910.2911495-2-maz@kernel.org --- arch/arm64/kvm/sys_regs.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 1d46e185f31e..0e8fc29df19c 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -1075,6 +1075,11 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV2), (u64)vcpu->kvm->arch.pfr0_csv2); val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_CSV3); val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV3), (u64)vcpu->kvm->arch.pfr0_csv3); + if (irqchip_in_kernel(vcpu->kvm) && + vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) { + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_GIC); + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_GIC), 1); + } break; case SYS_ID_AA64PFR1_EL1: val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_MTE); -- cgit From df652bcf1136db7f16e486a204ba4b4fc4181759 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sun, 10 Oct 2021 16:09:07 +0100 Subject: KVM: arm64: vgic-v3: Work around GICv3 locally generated SErrors The infamous M1 has a feature nobody else ever implemented, in the form of the "GIC locally generated SError interrupts", also known as SEIS for short. These SErrors are generated when a guest does something that violates the GIC state machine. It would have been simpler to just *ignore* the damned thing, but that's not what this HW does. Oh well. This part of of the architecture is also amazingly under-specified. There is a whole 10 lines that describe the feature in a spec that is 930 pages long, and some of these lines are factually wrong. Oh, and it is deprecated, so the insentive to clarify it is low. Now, the spec says that this should be a *virtual* SError when HCR_EL2.AMO is set. As it turns out, that's not always the case on this CPU, and the SError sometimes fires on the host as a physical SError. Goodbye, cruel world. This clearly is a HW bug, and it means that a guest can easily take the host down, on demand. Thankfully, we have seen systems that were just as broken in the past, and we have the perfect vaccine for it. Apple M1, please meet the Cavium ThunderX workaround. All your GIC accesses will be trapped, sanitised, and emulated. Only the signalling aspect of the HW will be used. It won't be super speedy, but it will at least be safe. You're most welcome. Given that this has only ever been seen on this single implementation, that the spec is unclear at best and that we cannot trust it to ever be implemented correctly, gate the workaround solely on ICH_VTR_EL2.SEIS being set. Tested-by: Joey Gouly Reviewed-by: Alexandru Elisei Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010150910.2911495-3-maz@kernel.org --- arch/arm64/kvm/vgic/vgic-v3.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c index 21a6207fb2ee..ae59e2580bf5 100644 --- a/arch/arm64/kvm/vgic/vgic-v3.c +++ b/arch/arm64/kvm/vgic/vgic-v3.c @@ -671,6 +671,14 @@ int vgic_v3_probe(const struct gic_kvm_info *info) group1_trap = true; } + if (kvm_vgic_global_state.ich_vtr_el2 & ICH_VTR_SEIS_MASK) { + kvm_info("GICv3 with locally generated SEI\n"); + + group0_trap = true; + group1_trap = true; + common_trap = true; + } + if (group0_trap || group1_trap || common_trap) { kvm_info("GICv3 sysreg trapping enabled ([%s%s%s], reduced performance)\n", group0_trap ? "G0" : "", -- cgit From 0924729b21bffdd0e13f29ea6256d299fc807cff Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sun, 10 Oct 2021 16:09:08 +0100 Subject: KVM: arm64: vgic-v3: Reduce common group trapping to ICV_DIR_EL1 when possible On systems that advertise ICH_VTR_EL2.SEIS, we trap all GICv3 sysreg accesses from the guest. From a performance perspective, this is OK as long as the guest doesn't hammer the GICv3 CPU interface. In most cases, this is fine, unless the guest actively uses priorities and switches PMR_EL1 very often. Which is exactly what happens when a Linux guest runs with irqchip.gicv3_pseudo_nmi=1. In these condition, the performance plumets as we hit PMR each time we mask/unmask interrupts. Not good. There is however an opportunity for improvement. Careful reading of the architecture specification indicates that the only GICv3 sysreg belonging to the common group (which contains the SGI registers, PMR, DIR, CTLR and RPR) that is allowed to generate a SError is DIR. Everything else is safe. It is thus possible to substitute the trapping of all the common group with just that of DIR if it supported by the implementation. Yes, that's yet another optional bit of the architecture. So let's just do that, as it leads to some impressive result on the M1: Without this change: bash-5.1# /host/home/maz/hackbench 100 process 1000 Running with 100*40 (== 4000) tasks. Time: 56.596 With this change: bash-5.1# /host/home/maz/hackbench 100 process 1000 Running with 100*40 (== 4000) tasks. Time: 8.649 which is a pretty convincing result. Signed-off-by: Marc Zyngier Reviewed-by: Alexandru Elisei Link: https://lore.kernel.org/r/20211010150910.2911495-4-maz@kernel.org --- arch/arm64/include/asm/sysreg.h | 3 +++ arch/arm64/kvm/vgic/vgic-v3.c | 15 +++++++++++---- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index b268082d67ed..9412a645a1c0 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -1152,6 +1152,7 @@ #define ICH_HCR_TC (1 << 10) #define ICH_HCR_TALL0 (1 << 11) #define ICH_HCR_TALL1 (1 << 12) +#define ICH_HCR_TDIR (1 << 14) #define ICH_HCR_EOIcount_SHIFT 27 #define ICH_HCR_EOIcount_MASK (0x1f << ICH_HCR_EOIcount_SHIFT) @@ -1184,6 +1185,8 @@ #define ICH_VTR_SEIS_MASK (1 << ICH_VTR_SEIS_SHIFT) #define ICH_VTR_A3V_SHIFT 21 #define ICH_VTR_A3V_MASK (1 << ICH_VTR_A3V_SHIFT) +#define ICH_VTR_TDS_SHIFT 19 +#define ICH_VTR_TDS_MASK (1 << ICH_VTR_TDS_SHIFT) #define ARM64_FEATURE_FIELD_BITS 4 diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c index ae59e2580bf5..467c22bbade6 100644 --- a/arch/arm64/kvm/vgic/vgic-v3.c +++ b/arch/arm64/kvm/vgic/vgic-v3.c @@ -15,6 +15,7 @@ static bool group0_trap; static bool group1_trap; static bool common_trap; +static bool dir_trap; static bool gicv4_enable; void vgic_v3_set_underflow(struct kvm_vcpu *vcpu) @@ -296,6 +297,8 @@ void vgic_v3_enable(struct kvm_vcpu *vcpu) vgic_v3->vgic_hcr |= ICH_HCR_TALL1; if (common_trap) vgic_v3->vgic_hcr |= ICH_HCR_TC; + if (dir_trap) + vgic_v3->vgic_hcr |= ICH_HCR_TDIR; } int vgic_v3_lpi_sync_pending_status(struct kvm *kvm, struct vgic_irq *irq) @@ -676,14 +679,18 @@ int vgic_v3_probe(const struct gic_kvm_info *info) group0_trap = true; group1_trap = true; - common_trap = true; + if (ich_vtr_el2 & ICH_VTR_TDS_MASK) + dir_trap = true; + else + common_trap = true; } - if (group0_trap || group1_trap || common_trap) { - kvm_info("GICv3 sysreg trapping enabled ([%s%s%s], reduced performance)\n", + if (group0_trap || group1_trap || common_trap | dir_trap) { + kvm_info("GICv3 sysreg trapping enabled ([%s%s%s%s], reduced performance)\n", group0_trap ? "G0" : "", group1_trap ? "G1" : "", - common_trap ? "C" : ""); + common_trap ? "C" : "", + dir_trap ? "D" : ""); static_branch_enable(&vgic_v3_cpuif_trap); } -- cgit From f87ab682722299cddf8cf5f7bc17053d70300ee0 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sun, 10 Oct 2021 16:09:09 +0100 Subject: KVM: arm64: vgic-v3: Don't advertise ICC_CTLR_EL1.SEIS Since we are trapping all sysreg accesses when ICH_VTR_EL2.SEIS is set, and that we never deliver an SError when emulating any of the GICv3 sysregs, don't advertise ICC_CTLR_EL1.SEIS. Reviewed-by: Alexandru Elisei Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010150910.2911495-5-maz@kernel.org --- arch/arm64/kvm/hyp/vgic-v3-sr.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/kvm/hyp/vgic-v3-sr.c b/arch/arm64/kvm/hyp/vgic-v3-sr.c index 39f8f7f9227c..b3b50de496a3 100644 --- a/arch/arm64/kvm/hyp/vgic-v3-sr.c +++ b/arch/arm64/kvm/hyp/vgic-v3-sr.c @@ -987,8 +987,6 @@ static void __vgic_v3_read_ctlr(struct kvm_vcpu *vcpu, u32 vmcr, int rt) val = ((vtr >> 29) & 7) << ICC_CTLR_EL1_PRI_BITS_SHIFT; /* IDbits */ val |= ((vtr >> 23) & 7) << ICC_CTLR_EL1_ID_BITS_SHIFT; - /* SEIS */ - val |= ((vtr >> 22) & 1) << ICC_CTLR_EL1_SEIS_SHIFT; /* A3V */ val |= ((vtr >> 21) & 1) << ICC_CTLR_EL1_A3V_SHIFT; /* EOImode */ -- cgit From 9d449c71bd8f74282e84213c8f0b8328293ab0a7 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sun, 10 Oct 2021 16:09:10 +0100 Subject: KVM: arm64: vgic-v3: Align emulated cpuif LPI state machine with the pseudocode Having realised that a virtual LPI does transition through an active state that does not exist on bare metal, align the CPU interface emulation with the behaviour specified in the architecture pseudocode. The LPIs now transition to active on IAR read, and to inactive on EOI write. Special care is taken not to increment the EOIcount for an LPI that isn't present in the LRs. Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211010150910.2911495-6-maz@kernel.org --- arch/arm64/kvm/hyp/vgic-v3-sr.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/arch/arm64/kvm/hyp/vgic-v3-sr.c b/arch/arm64/kvm/hyp/vgic-v3-sr.c index b3b50de496a3..20db2f281cf2 100644 --- a/arch/arm64/kvm/hyp/vgic-v3-sr.c +++ b/arch/arm64/kvm/hyp/vgic-v3-sr.c @@ -695,9 +695,7 @@ static void __vgic_v3_read_iar(struct kvm_vcpu *vcpu, u32 vmcr, int rt) goto spurious; lr_val &= ~ICH_LR_STATE; - /* No active state for LPIs */ - if ((lr_val & ICH_LR_VIRTUAL_ID_MASK) <= VGIC_MAX_SPI) - lr_val |= ICH_LR_ACTIVE_BIT; + lr_val |= ICH_LR_ACTIVE_BIT; __gic_v3_set_lr(lr_val, lr); __vgic_v3_set_active_priority(lr_prio, vmcr, grp); vcpu_set_reg(vcpu, rt, lr_val & ICH_LR_VIRTUAL_ID_MASK); @@ -764,20 +762,18 @@ static void __vgic_v3_write_eoir(struct kvm_vcpu *vcpu, u32 vmcr, int rt) /* Drop priority in any case */ act_prio = __vgic_v3_clear_highest_active_priority(); - /* If EOIing an LPI, no deactivate to be performed */ - if (vid >= VGIC_MIN_LPI) - return; - - /* EOImode == 1, nothing to be done here */ - if (vmcr & ICH_VMCR_EOIM_MASK) - return; - lr = __vgic_v3_find_active_lr(vcpu, vid, &lr_val); if (lr == -1) { - __vgic_v3_bump_eoicount(); + /* Do not bump EOIcount for LPIs that aren't in the LRs */ + if (!(vid >= VGIC_MIN_LPI)) + __vgic_v3_bump_eoicount(); return; } + /* EOImode == 1 and not an LPI, nothing to be done here */ + if ((vmcr & ICH_VMCR_EOIM_MASK) && !(vid >= VGIC_MIN_LPI)) + return; + lr_prio = (lr_val & ICH_LR_PRIORITY_MASK) >> ICH_LR_PRIORITY_SHIFT; /* If priorities or group do not match, the guest has fscked-up. */ -- cgit From 88ec7e258b70eed5e532d32115fccd11ea2a6287 Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:25 +0000 Subject: KVM: arm64: selftests: Add MMIO readl/writel support Define the readl() and writel() functions for the guests to access (4-byte) the MMIO region. The routines, and their dependents, are inspired from the kernel's arch/arm64/include/asm/io.h and arch/arm64/include/asm/barrier.h. Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Oliver Upton Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-2-rananta@google.com --- .../selftests/kvm/include/aarch64/processor.h | 46 +++++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/include/aarch64/processor.h b/tools/testing/selftests/kvm/include/aarch64/processor.h index c0273aefa63d..96578bd46a85 100644 --- a/tools/testing/selftests/kvm/include/aarch64/processor.h +++ b/tools/testing/selftests/kvm/include/aarch64/processor.h @@ -9,6 +9,7 @@ #include "kvm_util.h" #include +#include #define ARM64_CORE_REG(x) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \ @@ -130,6 +131,49 @@ void vm_install_sync_handler(struct kvm_vm *vm, val; \ }) -#define isb() asm volatile("isb" : : : "memory") +#define isb() asm volatile("isb" : : : "memory") +#define dsb(opt) asm volatile("dsb " #opt : : : "memory") +#define dmb(opt) asm volatile("dmb " #opt : : : "memory") + +#define dma_wmb() dmb(oshst) +#define __iowmb() dma_wmb() + +#define dma_rmb() dmb(oshld) + +#define __iormb(v) \ +({ \ + unsigned long tmp; \ + \ + dma_rmb(); \ + \ + /* \ + * Courtesy of arch/arm64/include/asm/io.h: \ + * Create a dummy control dependency from the IO read to any \ + * later instructions. This ensures that a subsequent call \ + * to udelay() will be ordered due to the ISB in __delay(). \ + */ \ + asm volatile("eor %0, %1, %1\n" \ + "cbnz %0, ." \ + : "=r" (tmp) : "r" ((unsigned long)(v)) \ + : "memory"); \ +}) + +static __always_inline void __raw_writel(u32 val, volatile void *addr) +{ + asm volatile("str %w0, [%1]" : : "rZ" (val), "r" (addr)); +} + +static __always_inline u32 __raw_readl(const volatile void *addr) +{ + u32 val; + asm volatile("ldr %w0, [%1]" : "=r" (val) : "r" (addr)); + return val; +} + +#define writel_relaxed(v,c) ((void)__raw_writel((__force u32)cpu_to_le32(v),(c))) +#define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32)__raw_readl(c)); __r; }) + +#define writel(v,c) ({ __iowmb(); writel_relaxed((v),(c));}) +#define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(__v); __v; }) #endif /* SELFTEST_KVM_PROCESSOR_H */ -- cgit From 272a067df3c89f6f2176a350f88661625a2c8b3b Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:26 +0000 Subject: tools: arm64: Import sysreg.h Bring-in the kernel's arch/arm64/include/asm/sysreg.h into tools/ for arm64 to make use of all the standard register definitions in consistence with the kernel. Make use of the register read/write definitions from sysreg.h, instead of the existing definitions. A syntax correction is needed for the files that use write_sysreg() to make it compliant with the new (kernel's) syntax. Reviewed-by: Andrew Jones Reviewed-by: Oliver Upton Signed-off-by: Raghavendra Rao Ananta [maz: squashed two commits in order to keep the series bisectable] Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-3-rananta@google.com Link: https://lore.kernel.org/r/20211007233439.1826892-4-rananta@google.com --- tools/arch/arm64/include/asm/sysreg.h | 1296 ++++++++++++++++++++ .../selftests/kvm/aarch64/debug-exceptions.c | 28 +- .../selftests/kvm/include/aarch64/processor.h | 13 +- 3 files changed, 1311 insertions(+), 26 deletions(-) create mode 100644 tools/arch/arm64/include/asm/sysreg.h diff --git a/tools/arch/arm64/include/asm/sysreg.h b/tools/arch/arm64/include/asm/sysreg.h new file mode 100644 index 000000000000..7640fa27be94 --- /dev/null +++ b/tools/arch/arm64/include/asm/sysreg.h @@ -0,0 +1,1296 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Macros for accessing system registers with older binutils. + * + * Copyright (C) 2014 ARM Ltd. + * Author: Catalin Marinas + */ + +#ifndef __ASM_SYSREG_H +#define __ASM_SYSREG_H + +#include +#include + +/* + * ARMv8 ARM reserves the following encoding for system registers: + * (Ref: ARMv8 ARM, Section: "System instruction class encoding overview", + * C5.2, version:ARM DDI 0487A.f) + * [20-19] : Op0 + * [18-16] : Op1 + * [15-12] : CRn + * [11-8] : CRm + * [7-5] : Op2 + */ +#define Op0_shift 19 +#define Op0_mask 0x3 +#define Op1_shift 16 +#define Op1_mask 0x7 +#define CRn_shift 12 +#define CRn_mask 0xf +#define CRm_shift 8 +#define CRm_mask 0xf +#define Op2_shift 5 +#define Op2_mask 0x7 + +#define sys_reg(op0, op1, crn, crm, op2) \ + (((op0) << Op0_shift) | ((op1) << Op1_shift) | \ + ((crn) << CRn_shift) | ((crm) << CRm_shift) | \ + ((op2) << Op2_shift)) + +#define sys_insn sys_reg + +#define sys_reg_Op0(id) (((id) >> Op0_shift) & Op0_mask) +#define sys_reg_Op1(id) (((id) >> Op1_shift) & Op1_mask) +#define sys_reg_CRn(id) (((id) >> CRn_shift) & CRn_mask) +#define sys_reg_CRm(id) (((id) >> CRm_shift) & CRm_mask) +#define sys_reg_Op2(id) (((id) >> Op2_shift) & Op2_mask) + +#ifndef CONFIG_BROKEN_GAS_INST + +#ifdef __ASSEMBLY__ +// The space separator is omitted so that __emit_inst(x) can be parsed as +// either an assembler directive or an assembler macro argument. +#define __emit_inst(x) .inst(x) +#else +#define __emit_inst(x) ".inst " __stringify((x)) "\n\t" +#endif + +#else /* CONFIG_BROKEN_GAS_INST */ + +#ifndef CONFIG_CPU_BIG_ENDIAN +#define __INSTR_BSWAP(x) (x) +#else /* CONFIG_CPU_BIG_ENDIAN */ +#define __INSTR_BSWAP(x) ((((x) << 24) & 0xff000000) | \ + (((x) << 8) & 0x00ff0000) | \ + (((x) >> 8) & 0x0000ff00) | \ + (((x) >> 24) & 0x000000ff)) +#endif /* CONFIG_CPU_BIG_ENDIAN */ + +#ifdef __ASSEMBLY__ +#define __emit_inst(x) .long __INSTR_BSWAP(x) +#else /* __ASSEMBLY__ */ +#define __emit_inst(x) ".long " __stringify(__INSTR_BSWAP(x)) "\n\t" +#endif /* __ASSEMBLY__ */ + +#endif /* CONFIG_BROKEN_GAS_INST */ + +/* + * Instructions for modifying PSTATE fields. + * As per Arm ARM for v8-A, Section "C.5.1.3 op0 == 0b00, architectural hints, + * barriers and CLREX, and PSTATE access", ARM DDI 0487 C.a, system instructions + * for accessing PSTATE fields have the following encoding: + * Op0 = 0, CRn = 4 + * Op1, Op2 encodes the PSTATE field modified and defines the constraints. + * CRm = Imm4 for the instruction. + * Rt = 0x1f + */ +#define pstate_field(op1, op2) ((op1) << Op1_shift | (op2) << Op2_shift) +#define PSTATE_Imm_shift CRm_shift + +#define PSTATE_PAN pstate_field(0, 4) +#define PSTATE_UAO pstate_field(0, 3) +#define PSTATE_SSBS pstate_field(3, 1) +#define PSTATE_TCO pstate_field(3, 4) + +#define SET_PSTATE_PAN(x) __emit_inst(0xd500401f | PSTATE_PAN | ((!!x) << PSTATE_Imm_shift)) +#define SET_PSTATE_UAO(x) __emit_inst(0xd500401f | PSTATE_UAO | ((!!x) << PSTATE_Imm_shift)) +#define SET_PSTATE_SSBS(x) __emit_inst(0xd500401f | PSTATE_SSBS | ((!!x) << PSTATE_Imm_shift)) +#define SET_PSTATE_TCO(x) __emit_inst(0xd500401f | PSTATE_TCO | ((!!x) << PSTATE_Imm_shift)) + +#define set_pstate_pan(x) asm volatile(SET_PSTATE_PAN(x)) +#define set_pstate_uao(x) asm volatile(SET_PSTATE_UAO(x)) +#define set_pstate_ssbs(x) asm volatile(SET_PSTATE_SSBS(x)) + +#define __SYS_BARRIER_INSN(CRm, op2, Rt) \ + __emit_inst(0xd5000000 | sys_insn(0, 3, 3, (CRm), (op2)) | ((Rt) & 0x1f)) + +#define SB_BARRIER_INSN __SYS_BARRIER_INSN(0, 7, 31) + +#define SYS_DC_ISW sys_insn(1, 0, 7, 6, 2) +#define SYS_DC_CSW sys_insn(1, 0, 7, 10, 2) +#define SYS_DC_CISW sys_insn(1, 0, 7, 14, 2) + +/* + * System registers, organised loosely by encoding but grouped together + * where the architected name contains an index. e.g. ID_MMFR_EL1. + */ +#define SYS_OSDTRRX_EL1 sys_reg(2, 0, 0, 0, 2) +#define SYS_MDCCINT_EL1 sys_reg(2, 0, 0, 2, 0) +#define SYS_MDSCR_EL1 sys_reg(2, 0, 0, 2, 2) +#define SYS_OSDTRTX_EL1 sys_reg(2, 0, 0, 3, 2) +#define SYS_OSECCR_EL1 sys_reg(2, 0, 0, 6, 2) +#define SYS_DBGBVRn_EL1(n) sys_reg(2, 0, 0, n, 4) +#define SYS_DBGBCRn_EL1(n) sys_reg(2, 0, 0, n, 5) +#define SYS_DBGWVRn_EL1(n) sys_reg(2, 0, 0, n, 6) +#define SYS_DBGWCRn_EL1(n) sys_reg(2, 0, 0, n, 7) +#define SYS_MDRAR_EL1 sys_reg(2, 0, 1, 0, 0) +#define SYS_OSLAR_EL1 sys_reg(2, 0, 1, 0, 4) +#define SYS_OSLSR_EL1 sys_reg(2, 0, 1, 1, 4) +#define SYS_OSDLR_EL1 sys_reg(2, 0, 1, 3, 4) +#define SYS_DBGPRCR_EL1 sys_reg(2, 0, 1, 4, 4) +#define SYS_DBGCLAIMSET_EL1 sys_reg(2, 0, 7, 8, 6) +#define SYS_DBGCLAIMCLR_EL1 sys_reg(2, 0, 7, 9, 6) +#define SYS_DBGAUTHSTATUS_EL1 sys_reg(2, 0, 7, 14, 6) +#define SYS_MDCCSR_EL0 sys_reg(2, 3, 0, 1, 0) +#define SYS_DBGDTR_EL0 sys_reg(2, 3, 0, 4, 0) +#define SYS_DBGDTRRX_EL0 sys_reg(2, 3, 0, 5, 0) +#define SYS_DBGDTRTX_EL0 sys_reg(2, 3, 0, 5, 0) +#define SYS_DBGVCR32_EL2 sys_reg(2, 4, 0, 7, 0) + +#define SYS_MIDR_EL1 sys_reg(3, 0, 0, 0, 0) +#define SYS_MPIDR_EL1 sys_reg(3, 0, 0, 0, 5) +#define SYS_REVIDR_EL1 sys_reg(3, 0, 0, 0, 6) + +#define SYS_ID_PFR0_EL1 sys_reg(3, 0, 0, 1, 0) +#define SYS_ID_PFR1_EL1 sys_reg(3, 0, 0, 1, 1) +#define SYS_ID_PFR2_EL1 sys_reg(3, 0, 0, 3, 4) +#define SYS_ID_DFR0_EL1 sys_reg(3, 0, 0, 1, 2) +#define SYS_ID_DFR1_EL1 sys_reg(3, 0, 0, 3, 5) +#define SYS_ID_AFR0_EL1 sys_reg(3, 0, 0, 1, 3) +#define SYS_ID_MMFR0_EL1 sys_reg(3, 0, 0, 1, 4) +#define SYS_ID_MMFR1_EL1 sys_reg(3, 0, 0, 1, 5) +#define SYS_ID_MMFR2_EL1 sys_reg(3, 0, 0, 1, 6) +#define SYS_ID_MMFR3_EL1 sys_reg(3, 0, 0, 1, 7) +#define SYS_ID_MMFR4_EL1 sys_reg(3, 0, 0, 2, 6) +#define SYS_ID_MMFR5_EL1 sys_reg(3, 0, 0, 3, 6) + +#define SYS_ID_ISAR0_EL1 sys_reg(3, 0, 0, 2, 0) +#define SYS_ID_ISAR1_EL1 sys_reg(3, 0, 0, 2, 1) +#define SYS_ID_ISAR2_EL1 sys_reg(3, 0, 0, 2, 2) +#define SYS_ID_ISAR3_EL1 sys_reg(3, 0, 0, 2, 3) +#define SYS_ID_ISAR4_EL1 sys_reg(3, 0, 0, 2, 4) +#define SYS_ID_ISAR5_EL1 sys_reg(3, 0, 0, 2, 5) +#define SYS_ID_ISAR6_EL1 sys_reg(3, 0, 0, 2, 7) + +#define SYS_MVFR0_EL1 sys_reg(3, 0, 0, 3, 0) +#define SYS_MVFR1_EL1 sys_reg(3, 0, 0, 3, 1) +#define SYS_MVFR2_EL1 sys_reg(3, 0, 0, 3, 2) + +#define SYS_ID_AA64PFR0_EL1 sys_reg(3, 0, 0, 4, 0) +#define SYS_ID_AA64PFR1_EL1 sys_reg(3, 0, 0, 4, 1) +#define SYS_ID_AA64ZFR0_EL1 sys_reg(3, 0, 0, 4, 4) + +#define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0) +#define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1) + +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4) +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5) + +#define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0) +#define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1) + +#define SYS_ID_AA64MMFR0_EL1 sys_reg(3, 0, 0, 7, 0) +#define SYS_ID_AA64MMFR1_EL1 sys_reg(3, 0, 0, 7, 1) +#define SYS_ID_AA64MMFR2_EL1 sys_reg(3, 0, 0, 7, 2) + +#define SYS_SCTLR_EL1 sys_reg(3, 0, 1, 0, 0) +#define SYS_ACTLR_EL1 sys_reg(3, 0, 1, 0, 1) +#define SYS_CPACR_EL1 sys_reg(3, 0, 1, 0, 2) +#define SYS_RGSR_EL1 sys_reg(3, 0, 1, 0, 5) +#define SYS_GCR_EL1 sys_reg(3, 0, 1, 0, 6) + +#define SYS_ZCR_EL1 sys_reg(3, 0, 1, 2, 0) +#define SYS_TRFCR_EL1 sys_reg(3, 0, 1, 2, 1) + +#define SYS_TTBR0_EL1 sys_reg(3, 0, 2, 0, 0) +#define SYS_TTBR1_EL1 sys_reg(3, 0, 2, 0, 1) +#define SYS_TCR_EL1 sys_reg(3, 0, 2, 0, 2) + +#define SYS_APIAKEYLO_EL1 sys_reg(3, 0, 2, 1, 0) +#define SYS_APIAKEYHI_EL1 sys_reg(3, 0, 2, 1, 1) +#define SYS_APIBKEYLO_EL1 sys_reg(3, 0, 2, 1, 2) +#define SYS_APIBKEYHI_EL1 sys_reg(3, 0, 2, 1, 3) + +#define SYS_APDAKEYLO_EL1 sys_reg(3, 0, 2, 2, 0) +#define SYS_APDAKEYHI_EL1 sys_reg(3, 0, 2, 2, 1) +#define SYS_APDBKEYLO_EL1 sys_reg(3, 0, 2, 2, 2) +#define SYS_APDBKEYHI_EL1 sys_reg(3, 0, 2, 2, 3) + +#define SYS_APGAKEYLO_EL1 sys_reg(3, 0, 2, 3, 0) +#define SYS_APGAKEYHI_EL1 sys_reg(3, 0, 2, 3, 1) + +#define SYS_SPSR_EL1 sys_reg(3, 0, 4, 0, 0) +#define SYS_ELR_EL1 sys_reg(3, 0, 4, 0, 1) + +#define SYS_ICC_PMR_EL1 sys_reg(3, 0, 4, 6, 0) + +#define SYS_AFSR0_EL1 sys_reg(3, 0, 5, 1, 0) +#define SYS_AFSR1_EL1 sys_reg(3, 0, 5, 1, 1) +#define SYS_ESR_EL1 sys_reg(3, 0, 5, 2, 0) + +#define SYS_ERRIDR_EL1 sys_reg(3, 0, 5, 3, 0) +#define SYS_ERRSELR_EL1 sys_reg(3, 0, 5, 3, 1) +#define SYS_ERXFR_EL1 sys_reg(3, 0, 5, 4, 0) +#define SYS_ERXCTLR_EL1 sys_reg(3, 0, 5, 4, 1) +#define SYS_ERXSTATUS_EL1 sys_reg(3, 0, 5, 4, 2) +#define SYS_ERXADDR_EL1 sys_reg(3, 0, 5, 4, 3) +#define SYS_ERXMISC0_EL1 sys_reg(3, 0, 5, 5, 0) +#define SYS_ERXMISC1_EL1 sys_reg(3, 0, 5, 5, 1) +#define SYS_TFSR_EL1 sys_reg(3, 0, 5, 6, 0) +#define SYS_TFSRE0_EL1 sys_reg(3, 0, 5, 6, 1) + +#define SYS_FAR_EL1 sys_reg(3, 0, 6, 0, 0) +#define SYS_PAR_EL1 sys_reg(3, 0, 7, 4, 0) + +#define SYS_PAR_EL1_F BIT(0) +#define SYS_PAR_EL1_FST GENMASK(6, 1) + +/*** Statistical Profiling Extension ***/ +/* ID registers */ +#define SYS_PMSIDR_EL1 sys_reg(3, 0, 9, 9, 7) +#define SYS_PMSIDR_EL1_FE_SHIFT 0 +#define SYS_PMSIDR_EL1_FT_SHIFT 1 +#define SYS_PMSIDR_EL1_FL_SHIFT 2 +#define SYS_PMSIDR_EL1_ARCHINST_SHIFT 3 +#define SYS_PMSIDR_EL1_LDS_SHIFT 4 +#define SYS_PMSIDR_EL1_ERND_SHIFT 5 +#define SYS_PMSIDR_EL1_INTERVAL_SHIFT 8 +#define SYS_PMSIDR_EL1_INTERVAL_MASK 0xfUL +#define SYS_PMSIDR_EL1_MAXSIZE_SHIFT 12 +#define SYS_PMSIDR_EL1_MAXSIZE_MASK 0xfUL +#define SYS_PMSIDR_EL1_COUNTSIZE_SHIFT 16 +#define SYS_PMSIDR_EL1_COUNTSIZE_MASK 0xfUL + +#define SYS_PMBIDR_EL1 sys_reg(3, 0, 9, 10, 7) +#define SYS_PMBIDR_EL1_ALIGN_SHIFT 0 +#define SYS_PMBIDR_EL1_ALIGN_MASK 0xfU +#define SYS_PMBIDR_EL1_P_SHIFT 4 +#define SYS_PMBIDR_EL1_F_SHIFT 5 + +/* Sampling controls */ +#define SYS_PMSCR_EL1 sys_reg(3, 0, 9, 9, 0) +#define SYS_PMSCR_EL1_E0SPE_SHIFT 0 +#define SYS_PMSCR_EL1_E1SPE_SHIFT 1 +#define SYS_PMSCR_EL1_CX_SHIFT 3 +#define SYS_PMSCR_EL1_PA_SHIFT 4 +#define SYS_PMSCR_EL1_TS_SHIFT 5 +#define SYS_PMSCR_EL1_PCT_SHIFT 6 + +#define SYS_PMSCR_EL2 sys_reg(3, 4, 9, 9, 0) +#define SYS_PMSCR_EL2_E0HSPE_SHIFT 0 +#define SYS_PMSCR_EL2_E2SPE_SHIFT 1 +#define SYS_PMSCR_EL2_CX_SHIFT 3 +#define SYS_PMSCR_EL2_PA_SHIFT 4 +#define SYS_PMSCR_EL2_TS_SHIFT 5 +#define SYS_PMSCR_EL2_PCT_SHIFT 6 + +#define SYS_PMSICR_EL1 sys_reg(3, 0, 9, 9, 2) + +#define SYS_PMSIRR_EL1 sys_reg(3, 0, 9, 9, 3) +#define SYS_PMSIRR_EL1_RND_SHIFT 0 +#define SYS_PMSIRR_EL1_INTERVAL_SHIFT 8 +#define SYS_PMSIRR_EL1_INTERVAL_MASK 0xffffffUL + +/* Filtering controls */ +#define SYS_PMSNEVFR_EL1 sys_reg(3, 0, 9, 9, 1) + +#define SYS_PMSFCR_EL1 sys_reg(3, 0, 9, 9, 4) +#define SYS_PMSFCR_EL1_FE_SHIFT 0 +#define SYS_PMSFCR_EL1_FT_SHIFT 1 +#define SYS_PMSFCR_EL1_FL_SHIFT 2 +#define SYS_PMSFCR_EL1_B_SHIFT 16 +#define SYS_PMSFCR_EL1_LD_SHIFT 17 +#define SYS_PMSFCR_EL1_ST_SHIFT 18 + +#define SYS_PMSEVFR_EL1 sys_reg(3, 0, 9, 9, 5) +#define SYS_PMSEVFR_EL1_RES0_8_2 \ + (GENMASK_ULL(47, 32) | GENMASK_ULL(23, 16) | GENMASK_ULL(11, 8) |\ + BIT_ULL(6) | BIT_ULL(4) | BIT_ULL(2) | BIT_ULL(0)) +#define SYS_PMSEVFR_EL1_RES0_8_3 \ + (SYS_PMSEVFR_EL1_RES0_8_2 & ~(BIT_ULL(18) | BIT_ULL(17) | BIT_ULL(11))) + +#define SYS_PMSLATFR_EL1 sys_reg(3, 0, 9, 9, 6) +#define SYS_PMSLATFR_EL1_MINLAT_SHIFT 0 + +/* Buffer controls */ +#define SYS_PMBLIMITR_EL1 sys_reg(3, 0, 9, 10, 0) +#define SYS_PMBLIMITR_EL1_E_SHIFT 0 +#define SYS_PMBLIMITR_EL1_FM_SHIFT 1 +#define SYS_PMBLIMITR_EL1_FM_MASK 0x3UL +#define SYS_PMBLIMITR_EL1_FM_STOP_IRQ (0 << SYS_PMBLIMITR_EL1_FM_SHIFT) + +#define SYS_PMBPTR_EL1 sys_reg(3, 0, 9, 10, 1) + +/* Buffer error reporting */ +#define SYS_PMBSR_EL1 sys_reg(3, 0, 9, 10, 3) +#define SYS_PMBSR_EL1_COLL_SHIFT 16 +#define SYS_PMBSR_EL1_S_SHIFT 17 +#define SYS_PMBSR_EL1_EA_SHIFT 18 +#define SYS_PMBSR_EL1_DL_SHIFT 19 +#define SYS_PMBSR_EL1_EC_SHIFT 26 +#define SYS_PMBSR_EL1_EC_MASK 0x3fUL + +#define SYS_PMBSR_EL1_EC_BUF (0x0UL << SYS_PMBSR_EL1_EC_SHIFT) +#define SYS_PMBSR_EL1_EC_FAULT_S1 (0x24UL << SYS_PMBSR_EL1_EC_SHIFT) +#define SYS_PMBSR_EL1_EC_FAULT_S2 (0x25UL << SYS_PMBSR_EL1_EC_SHIFT) + +#define SYS_PMBSR_EL1_FAULT_FSC_SHIFT 0 +#define SYS_PMBSR_EL1_FAULT_FSC_MASK 0x3fUL + +#define SYS_PMBSR_EL1_BUF_BSC_SHIFT 0 +#define SYS_PMBSR_EL1_BUF_BSC_MASK 0x3fUL + +#define SYS_PMBSR_EL1_BUF_BSC_FULL (0x1UL << SYS_PMBSR_EL1_BUF_BSC_SHIFT) + +/*** End of Statistical Profiling Extension ***/ + +/* + * TRBE Registers + */ +#define SYS_TRBLIMITR_EL1 sys_reg(3, 0, 9, 11, 0) +#define SYS_TRBPTR_EL1 sys_reg(3, 0, 9, 11, 1) +#define SYS_TRBBASER_EL1 sys_reg(3, 0, 9, 11, 2) +#define SYS_TRBSR_EL1 sys_reg(3, 0, 9, 11, 3) +#define SYS_TRBMAR_EL1 sys_reg(3, 0, 9, 11, 4) +#define SYS_TRBTRG_EL1 sys_reg(3, 0, 9, 11, 6) +#define SYS_TRBIDR_EL1 sys_reg(3, 0, 9, 11, 7) + +#define TRBLIMITR_LIMIT_MASK GENMASK_ULL(51, 0) +#define TRBLIMITR_LIMIT_SHIFT 12 +#define TRBLIMITR_NVM BIT(5) +#define TRBLIMITR_TRIG_MODE_MASK GENMASK(1, 0) +#define TRBLIMITR_TRIG_MODE_SHIFT 3 +#define TRBLIMITR_FILL_MODE_MASK GENMASK(1, 0) +#define TRBLIMITR_FILL_MODE_SHIFT 1 +#define TRBLIMITR_ENABLE BIT(0) +#define TRBPTR_PTR_MASK GENMASK_ULL(63, 0) +#define TRBPTR_PTR_SHIFT 0 +#define TRBBASER_BASE_MASK GENMASK_ULL(51, 0) +#define TRBBASER_BASE_SHIFT 12 +#define TRBSR_EC_MASK GENMASK(5, 0) +#define TRBSR_EC_SHIFT 26 +#define TRBSR_IRQ BIT(22) +#define TRBSR_TRG BIT(21) +#define TRBSR_WRAP BIT(20) +#define TRBSR_ABORT BIT(18) +#define TRBSR_STOP BIT(17) +#define TRBSR_MSS_MASK GENMASK(15, 0) +#define TRBSR_MSS_SHIFT 0 +#define TRBSR_BSC_MASK GENMASK(5, 0) +#define TRBSR_BSC_SHIFT 0 +#define TRBSR_FSC_MASK GENMASK(5, 0) +#define TRBSR_FSC_SHIFT 0 +#define TRBMAR_SHARE_MASK GENMASK(1, 0) +#define TRBMAR_SHARE_SHIFT 8 +#define TRBMAR_OUTER_MASK GENMASK(3, 0) +#define TRBMAR_OUTER_SHIFT 4 +#define TRBMAR_INNER_MASK GENMASK(3, 0) +#define TRBMAR_INNER_SHIFT 0 +#define TRBTRG_TRG_MASK GENMASK(31, 0) +#define TRBTRG_TRG_SHIFT 0 +#define TRBIDR_FLAG BIT(5) +#define TRBIDR_PROG BIT(4) +#define TRBIDR_ALIGN_MASK GENMASK(3, 0) +#define TRBIDR_ALIGN_SHIFT 0 + +#define SYS_PMINTENSET_EL1 sys_reg(3, 0, 9, 14, 1) +#define SYS_PMINTENCLR_EL1 sys_reg(3, 0, 9, 14, 2) + +#define SYS_PMMIR_EL1 sys_reg(3, 0, 9, 14, 6) + +#define SYS_MAIR_EL1 sys_reg(3, 0, 10, 2, 0) +#define SYS_AMAIR_EL1 sys_reg(3, 0, 10, 3, 0) + +#define SYS_LORSA_EL1 sys_reg(3, 0, 10, 4, 0) +#define SYS_LOREA_EL1 sys_reg(3, 0, 10, 4, 1) +#define SYS_LORN_EL1 sys_reg(3, 0, 10, 4, 2) +#define SYS_LORC_EL1 sys_reg(3, 0, 10, 4, 3) +#define SYS_LORID_EL1 sys_reg(3, 0, 10, 4, 7) + +#define SYS_VBAR_EL1 sys_reg(3, 0, 12, 0, 0) +#define SYS_DISR_EL1 sys_reg(3, 0, 12, 1, 1) + +#define SYS_ICC_IAR0_EL1 sys_reg(3, 0, 12, 8, 0) +#define SYS_ICC_EOIR0_EL1 sys_reg(3, 0, 12, 8, 1) +#define SYS_ICC_HPPIR0_EL1 sys_reg(3, 0, 12, 8, 2) +#define SYS_ICC_BPR0_EL1 sys_reg(3, 0, 12, 8, 3) +#define SYS_ICC_AP0Rn_EL1(n) sys_reg(3, 0, 12, 8, 4 | n) +#define SYS_ICC_AP0R0_EL1 SYS_ICC_AP0Rn_EL1(0) +#define SYS_ICC_AP0R1_EL1 SYS_ICC_AP0Rn_EL1(1) +#define SYS_ICC_AP0R2_EL1 SYS_ICC_AP0Rn_EL1(2) +#define SYS_ICC_AP0R3_EL1 SYS_ICC_AP0Rn_EL1(3) +#define SYS_ICC_AP1Rn_EL1(n) sys_reg(3, 0, 12, 9, n) +#define SYS_ICC_AP1R0_EL1 SYS_ICC_AP1Rn_EL1(0) +#define SYS_ICC_AP1R1_EL1 SYS_ICC_AP1Rn_EL1(1) +#define SYS_ICC_AP1R2_EL1 SYS_ICC_AP1Rn_EL1(2) +#define SYS_ICC_AP1R3_EL1 SYS_ICC_AP1Rn_EL1(3) +#define SYS_ICC_DIR_EL1 sys_reg(3, 0, 12, 11, 1) +#define SYS_ICC_RPR_EL1 sys_reg(3, 0, 12, 11, 3) +#define SYS_ICC_SGI1R_EL1 sys_reg(3, 0, 12, 11, 5) +#define SYS_ICC_ASGI1R_EL1 sys_reg(3, 0, 12, 11, 6) +#define SYS_ICC_SGI0R_EL1 sys_reg(3, 0, 12, 11, 7) +#define SYS_ICC_IAR1_EL1 sys_reg(3, 0, 12, 12, 0) +#define SYS_ICC_EOIR1_EL1 sys_reg(3, 0, 12, 12, 1) +#define SYS_ICC_HPPIR1_EL1 sys_reg(3, 0, 12, 12, 2) +#define SYS_ICC_BPR1_EL1 sys_reg(3, 0, 12, 12, 3) +#define SYS_ICC_CTLR_EL1 sys_reg(3, 0, 12, 12, 4) +#define SYS_ICC_SRE_EL1 sys_reg(3, 0, 12, 12, 5) +#define SYS_ICC_IGRPEN0_EL1 sys_reg(3, 0, 12, 12, 6) +#define SYS_ICC_IGRPEN1_EL1 sys_reg(3, 0, 12, 12, 7) + +#define SYS_CONTEXTIDR_EL1 sys_reg(3, 0, 13, 0, 1) +#define SYS_TPIDR_EL1 sys_reg(3, 0, 13, 0, 4) + +#define SYS_SCXTNUM_EL1 sys_reg(3, 0, 13, 0, 7) + +#define SYS_CNTKCTL_EL1 sys_reg(3, 0, 14, 1, 0) + +#define SYS_CCSIDR_EL1 sys_reg(3, 1, 0, 0, 0) +#define SYS_CLIDR_EL1 sys_reg(3, 1, 0, 0, 1) +#define SYS_GMID_EL1 sys_reg(3, 1, 0, 0, 4) +#define SYS_AIDR_EL1 sys_reg(3, 1, 0, 0, 7) + +#define SYS_CSSELR_EL1 sys_reg(3, 2, 0, 0, 0) + +#define SYS_CTR_EL0 sys_reg(3, 3, 0, 0, 1) +#define SYS_DCZID_EL0 sys_reg(3, 3, 0, 0, 7) + +#define SYS_RNDR_EL0 sys_reg(3, 3, 2, 4, 0) +#define SYS_RNDRRS_EL0 sys_reg(3, 3, 2, 4, 1) + +#define SYS_PMCR_EL0 sys_reg(3, 3, 9, 12, 0) +#define SYS_PMCNTENSET_EL0 sys_reg(3, 3, 9, 12, 1) +#define SYS_PMCNTENCLR_EL0 sys_reg(3, 3, 9, 12, 2) +#define SYS_PMOVSCLR_EL0 sys_reg(3, 3, 9, 12, 3) +#define SYS_PMSWINC_EL0 sys_reg(3, 3, 9, 12, 4) +#define SYS_PMSELR_EL0 sys_reg(3, 3, 9, 12, 5) +#define SYS_PMCEID0_EL0 sys_reg(3, 3, 9, 12, 6) +#define SYS_PMCEID1_EL0 sys_reg(3, 3, 9, 12, 7) +#define SYS_PMCCNTR_EL0 sys_reg(3, 3, 9, 13, 0) +#define SYS_PMXEVTYPER_EL0 sys_reg(3, 3, 9, 13, 1) +#define SYS_PMXEVCNTR_EL0 sys_reg(3, 3, 9, 13, 2) +#define SYS_PMUSERENR_EL0 sys_reg(3, 3, 9, 14, 0) +#define SYS_PMOVSSET_EL0 sys_reg(3, 3, 9, 14, 3) + +#define SYS_TPIDR_EL0 sys_reg(3, 3, 13, 0, 2) +#define SYS_TPIDRRO_EL0 sys_reg(3, 3, 13, 0, 3) + +#define SYS_SCXTNUM_EL0 sys_reg(3, 3, 13, 0, 7) + +/* Definitions for system register interface to AMU for ARMv8.4 onwards */ +#define SYS_AM_EL0(crm, op2) sys_reg(3, 3, 13, (crm), (op2)) +#define SYS_AMCR_EL0 SYS_AM_EL0(2, 0) +#define SYS_AMCFGR_EL0 SYS_AM_EL0(2, 1) +#define SYS_AMCGCR_EL0 SYS_AM_EL0(2, 2) +#define SYS_AMUSERENR_EL0 SYS_AM_EL0(2, 3) +#define SYS_AMCNTENCLR0_EL0 SYS_AM_EL0(2, 4) +#define SYS_AMCNTENSET0_EL0 SYS_AM_EL0(2, 5) +#define SYS_AMCNTENCLR1_EL0 SYS_AM_EL0(3, 0) +#define SYS_AMCNTENSET1_EL0 SYS_AM_EL0(3, 1) + +/* + * Group 0 of activity monitors (architected): + * op0 op1 CRn CRm op2 + * Counter: 11 011 1101 010:n<3> n<2:0> + * Type: 11 011 1101 011:n<3> n<2:0> + * n: 0-15 + * + * Group 1 of activity monitors (auxiliary): + * op0 op1 CRn CRm op2 + * Counter: 11 011 1101 110:n<3> n<2:0> + * Type: 11 011 1101 111:n<3> n<2:0> + * n: 0-15 + */ + +#define SYS_AMEVCNTR0_EL0(n) SYS_AM_EL0(4 + ((n) >> 3), (n) & 7) +#define SYS_AMEVTYPER0_EL0(n) SYS_AM_EL0(6 + ((n) >> 3), (n) & 7) +#define SYS_AMEVCNTR1_EL0(n) SYS_AM_EL0(12 + ((n) >> 3), (n) & 7) +#define SYS_AMEVTYPER1_EL0(n) SYS_AM_EL0(14 + ((n) >> 3), (n) & 7) + +/* AMU v1: Fixed (architecturally defined) activity monitors */ +#define SYS_AMEVCNTR0_CORE_EL0 SYS_AMEVCNTR0_EL0(0) +#define SYS_AMEVCNTR0_CONST_EL0 SYS_AMEVCNTR0_EL0(1) +#define SYS_AMEVCNTR0_INST_RET_EL0 SYS_AMEVCNTR0_EL0(2) +#define SYS_AMEVCNTR0_MEM_STALL SYS_AMEVCNTR0_EL0(3) + +#define SYS_CNTFRQ_EL0 sys_reg(3, 3, 14, 0, 0) + +#define SYS_CNTP_TVAL_EL0 sys_reg(3, 3, 14, 2, 0) +#define SYS_CNTP_CTL_EL0 sys_reg(3, 3, 14, 2, 1) +#define SYS_CNTP_CVAL_EL0 sys_reg(3, 3, 14, 2, 2) + +#define SYS_CNTV_CTL_EL0 sys_reg(3, 3, 14, 3, 1) +#define SYS_CNTV_CVAL_EL0 sys_reg(3, 3, 14, 3, 2) + +#define SYS_AARCH32_CNTP_TVAL sys_reg(0, 0, 14, 2, 0) +#define SYS_AARCH32_CNTP_CTL sys_reg(0, 0, 14, 2, 1) +#define SYS_AARCH32_CNTP_CVAL sys_reg(0, 2, 0, 14, 0) + +#define __PMEV_op2(n) ((n) & 0x7) +#define __CNTR_CRm(n) (0x8 | (((n) >> 3) & 0x3)) +#define SYS_PMEVCNTRn_EL0(n) sys_reg(3, 3, 14, __CNTR_CRm(n), __PMEV_op2(n)) +#define __TYPER_CRm(n) (0xc | (((n) >> 3) & 0x3)) +#define SYS_PMEVTYPERn_EL0(n) sys_reg(3, 3, 14, __TYPER_CRm(n), __PMEV_op2(n)) + +#define SYS_PMCCFILTR_EL0 sys_reg(3, 3, 14, 15, 7) + +#define SYS_SCTLR_EL2 sys_reg(3, 4, 1, 0, 0) +#define SYS_HFGRTR_EL2 sys_reg(3, 4, 1, 1, 4) +#define SYS_HFGWTR_EL2 sys_reg(3, 4, 1, 1, 5) +#define SYS_HFGITR_EL2 sys_reg(3, 4, 1, 1, 6) +#define SYS_ZCR_EL2 sys_reg(3, 4, 1, 2, 0) +#define SYS_TRFCR_EL2 sys_reg(3, 4, 1, 2, 1) +#define SYS_DACR32_EL2 sys_reg(3, 4, 3, 0, 0) +#define SYS_HDFGRTR_EL2 sys_reg(3, 4, 3, 1, 4) +#define SYS_HDFGWTR_EL2 sys_reg(3, 4, 3, 1, 5) +#define SYS_HAFGRTR_EL2 sys_reg(3, 4, 3, 1, 6) +#define SYS_SPSR_EL2 sys_reg(3, 4, 4, 0, 0) +#define SYS_ELR_EL2 sys_reg(3, 4, 4, 0, 1) +#define SYS_IFSR32_EL2 sys_reg(3, 4, 5, 0, 1) +#define SYS_ESR_EL2 sys_reg(3, 4, 5, 2, 0) +#define SYS_VSESR_EL2 sys_reg(3, 4, 5, 2, 3) +#define SYS_FPEXC32_EL2 sys_reg(3, 4, 5, 3, 0) +#define SYS_TFSR_EL2 sys_reg(3, 4, 5, 6, 0) +#define SYS_FAR_EL2 sys_reg(3, 4, 6, 0, 0) + +#define SYS_VDISR_EL2 sys_reg(3, 4, 12, 1, 1) +#define __SYS__AP0Rx_EL2(x) sys_reg(3, 4, 12, 8, x) +#define SYS_ICH_AP0R0_EL2 __SYS__AP0Rx_EL2(0) +#define SYS_ICH_AP0R1_EL2 __SYS__AP0Rx_EL2(1) +#define SYS_ICH_AP0R2_EL2 __SYS__AP0Rx_EL2(2) +#define SYS_ICH_AP0R3_EL2 __SYS__AP0Rx_EL2(3) + +#define __SYS__AP1Rx_EL2(x) sys_reg(3, 4, 12, 9, x) +#define SYS_ICH_AP1R0_EL2 __SYS__AP1Rx_EL2(0) +#define SYS_ICH_AP1R1_EL2 __SYS__AP1Rx_EL2(1) +#define SYS_ICH_AP1R2_EL2 __SYS__AP1Rx_EL2(2) +#define SYS_ICH_AP1R3_EL2 __SYS__AP1Rx_EL2(3) + +#define SYS_ICH_VSEIR_EL2 sys_reg(3, 4, 12, 9, 4) +#define SYS_ICC_SRE_EL2 sys_reg(3, 4, 12, 9, 5) +#define SYS_ICH_HCR_EL2 sys_reg(3, 4, 12, 11, 0) +#define SYS_ICH_VTR_EL2 sys_reg(3, 4, 12, 11, 1) +#define SYS_ICH_MISR_EL2 sys_reg(3, 4, 12, 11, 2) +#define SYS_ICH_EISR_EL2 sys_reg(3, 4, 12, 11, 3) +#define SYS_ICH_ELRSR_EL2 sys_reg(3, 4, 12, 11, 5) +#define SYS_ICH_VMCR_EL2 sys_reg(3, 4, 12, 11, 7) + +#define __SYS__LR0_EL2(x) sys_reg(3, 4, 12, 12, x) +#define SYS_ICH_LR0_EL2 __SYS__LR0_EL2(0) +#define SYS_ICH_LR1_EL2 __SYS__LR0_EL2(1) +#define SYS_ICH_LR2_EL2 __SYS__LR0_EL2(2) +#define SYS_ICH_LR3_EL2 __SYS__LR0_EL2(3) +#define SYS_ICH_LR4_EL2 __SYS__LR0_EL2(4) +#define SYS_ICH_LR5_EL2 __SYS__LR0_EL2(5) +#define SYS_ICH_LR6_EL2 __SYS__LR0_EL2(6) +#define SYS_ICH_LR7_EL2 __SYS__LR0_EL2(7) + +#define __SYS__LR8_EL2(x) sys_reg(3, 4, 12, 13, x) +#define SYS_ICH_LR8_EL2 __SYS__LR8_EL2(0) +#define SYS_ICH_LR9_EL2 __SYS__LR8_EL2(1) +#define SYS_ICH_LR10_EL2 __SYS__LR8_EL2(2) +#define SYS_ICH_LR11_EL2 __SYS__LR8_EL2(3) +#define SYS_ICH_LR12_EL2 __SYS__LR8_EL2(4) +#define SYS_ICH_LR13_EL2 __SYS__LR8_EL2(5) +#define SYS_ICH_LR14_EL2 __SYS__LR8_EL2(6) +#define SYS_ICH_LR15_EL2 __SYS__LR8_EL2(7) + +/* VHE encodings for architectural EL0/1 system registers */ +#define SYS_SCTLR_EL12 sys_reg(3, 5, 1, 0, 0) +#define SYS_CPACR_EL12 sys_reg(3, 5, 1, 0, 2) +#define SYS_ZCR_EL12 sys_reg(3, 5, 1, 2, 0) +#define SYS_TTBR0_EL12 sys_reg(3, 5, 2, 0, 0) +#define SYS_TTBR1_EL12 sys_reg(3, 5, 2, 0, 1) +#define SYS_TCR_EL12 sys_reg(3, 5, 2, 0, 2) +#define SYS_SPSR_EL12 sys_reg(3, 5, 4, 0, 0) +#define SYS_ELR_EL12 sys_reg(3, 5, 4, 0, 1) +#define SYS_AFSR0_EL12 sys_reg(3, 5, 5, 1, 0) +#define SYS_AFSR1_EL12 sys_reg(3, 5, 5, 1, 1) +#define SYS_ESR_EL12 sys_reg(3, 5, 5, 2, 0) +#define SYS_TFSR_EL12 sys_reg(3, 5, 5, 6, 0) +#define SYS_FAR_EL12 sys_reg(3, 5, 6, 0, 0) +#define SYS_MAIR_EL12 sys_reg(3, 5, 10, 2, 0) +#define SYS_AMAIR_EL12 sys_reg(3, 5, 10, 3, 0) +#define SYS_VBAR_EL12 sys_reg(3, 5, 12, 0, 0) +#define SYS_CONTEXTIDR_EL12 sys_reg(3, 5, 13, 0, 1) +#define SYS_CNTKCTL_EL12 sys_reg(3, 5, 14, 1, 0) +#define SYS_CNTP_TVAL_EL02 sys_reg(3, 5, 14, 2, 0) +#define SYS_CNTP_CTL_EL02 sys_reg(3, 5, 14, 2, 1) +#define SYS_CNTP_CVAL_EL02 sys_reg(3, 5, 14, 2, 2) +#define SYS_CNTV_TVAL_EL02 sys_reg(3, 5, 14, 3, 0) +#define SYS_CNTV_CTL_EL02 sys_reg(3, 5, 14, 3, 1) +#define SYS_CNTV_CVAL_EL02 sys_reg(3, 5, 14, 3, 2) + +/* Common SCTLR_ELx flags. */ +#define SCTLR_ELx_DSSBS (BIT(44)) +#define SCTLR_ELx_ATA (BIT(43)) + +#define SCTLR_ELx_TCF_SHIFT 40 +#define SCTLR_ELx_TCF_NONE (UL(0x0) << SCTLR_ELx_TCF_SHIFT) +#define SCTLR_ELx_TCF_SYNC (UL(0x1) << SCTLR_ELx_TCF_SHIFT) +#define SCTLR_ELx_TCF_ASYNC (UL(0x2) << SCTLR_ELx_TCF_SHIFT) +#define SCTLR_ELx_TCF_MASK (UL(0x3) << SCTLR_ELx_TCF_SHIFT) + +#define SCTLR_ELx_ENIA_SHIFT 31 + +#define SCTLR_ELx_ITFSB (BIT(37)) +#define SCTLR_ELx_ENIA (BIT(SCTLR_ELx_ENIA_SHIFT)) +#define SCTLR_ELx_ENIB (BIT(30)) +#define SCTLR_ELx_ENDA (BIT(27)) +#define SCTLR_ELx_EE (BIT(25)) +#define SCTLR_ELx_IESB (BIT(21)) +#define SCTLR_ELx_WXN (BIT(19)) +#define SCTLR_ELx_ENDB (BIT(13)) +#define SCTLR_ELx_I (BIT(12)) +#define SCTLR_ELx_SA (BIT(3)) +#define SCTLR_ELx_C (BIT(2)) +#define SCTLR_ELx_A (BIT(1)) +#define SCTLR_ELx_M (BIT(0)) + +/* SCTLR_EL2 specific flags. */ +#define SCTLR_EL2_RES1 ((BIT(4)) | (BIT(5)) | (BIT(11)) | (BIT(16)) | \ + (BIT(18)) | (BIT(22)) | (BIT(23)) | (BIT(28)) | \ + (BIT(29))) + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define ENDIAN_SET_EL2 SCTLR_ELx_EE +#else +#define ENDIAN_SET_EL2 0 +#endif + +#define INIT_SCTLR_EL2_MMU_ON \ + (SCTLR_ELx_M | SCTLR_ELx_C | SCTLR_ELx_SA | SCTLR_ELx_I | \ + SCTLR_ELx_IESB | SCTLR_ELx_WXN | ENDIAN_SET_EL2 | \ + SCTLR_ELx_ITFSB | SCTLR_EL2_RES1) + +#define INIT_SCTLR_EL2_MMU_OFF \ + (SCTLR_EL2_RES1 | ENDIAN_SET_EL2) + +/* SCTLR_EL1 specific flags. */ +#define SCTLR_EL1_EPAN (BIT(57)) +#define SCTLR_EL1_ATA0 (BIT(42)) + +#define SCTLR_EL1_TCF0_SHIFT 38 +#define SCTLR_EL1_TCF0_NONE (UL(0x0) << SCTLR_EL1_TCF0_SHIFT) +#define SCTLR_EL1_TCF0_SYNC (UL(0x1) << SCTLR_EL1_TCF0_SHIFT) +#define SCTLR_EL1_TCF0_ASYNC (UL(0x2) << SCTLR_EL1_TCF0_SHIFT) +#define SCTLR_EL1_TCF0_MASK (UL(0x3) << SCTLR_EL1_TCF0_SHIFT) + +#define SCTLR_EL1_BT1 (BIT(36)) +#define SCTLR_EL1_BT0 (BIT(35)) +#define SCTLR_EL1_UCI (BIT(26)) +#define SCTLR_EL1_E0E (BIT(24)) +#define SCTLR_EL1_SPAN (BIT(23)) +#define SCTLR_EL1_NTWE (BIT(18)) +#define SCTLR_EL1_NTWI (BIT(16)) +#define SCTLR_EL1_UCT (BIT(15)) +#define SCTLR_EL1_DZE (BIT(14)) +#define SCTLR_EL1_UMA (BIT(9)) +#define SCTLR_EL1_SED (BIT(8)) +#define SCTLR_EL1_ITD (BIT(7)) +#define SCTLR_EL1_CP15BEN (BIT(5)) +#define SCTLR_EL1_SA0 (BIT(4)) + +#define SCTLR_EL1_RES1 ((BIT(11)) | (BIT(20)) | (BIT(22)) | (BIT(28)) | \ + (BIT(29))) + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define ENDIAN_SET_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE) +#else +#define ENDIAN_SET_EL1 0 +#endif + +#define INIT_SCTLR_EL1_MMU_OFF \ + (ENDIAN_SET_EL1 | SCTLR_EL1_RES1) + +#define INIT_SCTLR_EL1_MMU_ON \ + (SCTLR_ELx_M | SCTLR_ELx_C | SCTLR_ELx_SA | SCTLR_EL1_SA0 | \ + SCTLR_EL1_SED | SCTLR_ELx_I | SCTLR_EL1_DZE | SCTLR_EL1_UCT | \ + SCTLR_EL1_NTWE | SCTLR_ELx_IESB | SCTLR_EL1_SPAN | SCTLR_ELx_ITFSB | \ + SCTLR_ELx_ATA | SCTLR_EL1_ATA0 | ENDIAN_SET_EL1 | SCTLR_EL1_UCI | \ + SCTLR_EL1_EPAN | SCTLR_EL1_RES1) + +/* MAIR_ELx memory attributes (used by Linux) */ +#define MAIR_ATTR_DEVICE_nGnRnE UL(0x00) +#define MAIR_ATTR_DEVICE_nGnRE UL(0x04) +#define MAIR_ATTR_NORMAL_NC UL(0x44) +#define MAIR_ATTR_NORMAL_TAGGED UL(0xf0) +#define MAIR_ATTR_NORMAL UL(0xff) +#define MAIR_ATTR_MASK UL(0xff) + +/* Position the attr at the correct index */ +#define MAIR_ATTRIDX(attr, idx) ((attr) << ((idx) * 8)) + +/* id_aa64isar0 */ +#define ID_AA64ISAR0_RNDR_SHIFT 60 +#define ID_AA64ISAR0_TLB_SHIFT 56 +#define ID_AA64ISAR0_TS_SHIFT 52 +#define ID_AA64ISAR0_FHM_SHIFT 48 +#define ID_AA64ISAR0_DP_SHIFT 44 +#define ID_AA64ISAR0_SM4_SHIFT 40 +#define ID_AA64ISAR0_SM3_SHIFT 36 +#define ID_AA64ISAR0_SHA3_SHIFT 32 +#define ID_AA64ISAR0_RDM_SHIFT 28 +#define ID_AA64ISAR0_ATOMICS_SHIFT 20 +#define ID_AA64ISAR0_CRC32_SHIFT 16 +#define ID_AA64ISAR0_SHA2_SHIFT 12 +#define ID_AA64ISAR0_SHA1_SHIFT 8 +#define ID_AA64ISAR0_AES_SHIFT 4 + +#define ID_AA64ISAR0_TLB_RANGE_NI 0x0 +#define ID_AA64ISAR0_TLB_RANGE 0x2 + +/* id_aa64isar1 */ +#define ID_AA64ISAR1_I8MM_SHIFT 52 +#define ID_AA64ISAR1_DGH_SHIFT 48 +#define ID_AA64ISAR1_BF16_SHIFT 44 +#define ID_AA64ISAR1_SPECRES_SHIFT 40 +#define ID_AA64ISAR1_SB_SHIFT 36 +#define ID_AA64ISAR1_FRINTTS_SHIFT 32 +#define ID_AA64ISAR1_GPI_SHIFT 28 +#define ID_AA64ISAR1_GPA_SHIFT 24 +#define ID_AA64ISAR1_LRCPC_SHIFT 20 +#define ID_AA64ISAR1_FCMA_SHIFT 16 +#define ID_AA64ISAR1_JSCVT_SHIFT 12 +#define ID_AA64ISAR1_API_SHIFT 8 +#define ID_AA64ISAR1_APA_SHIFT 4 +#define ID_AA64ISAR1_DPB_SHIFT 0 + +#define ID_AA64ISAR1_APA_NI 0x0 +#define ID_AA64ISAR1_APA_ARCHITECTED 0x1 +#define ID_AA64ISAR1_APA_ARCH_EPAC 0x2 +#define ID_AA64ISAR1_APA_ARCH_EPAC2 0x3 +#define ID_AA64ISAR1_APA_ARCH_EPAC2_FPAC 0x4 +#define ID_AA64ISAR1_APA_ARCH_EPAC2_FPAC_CMB 0x5 +#define ID_AA64ISAR1_API_NI 0x0 +#define ID_AA64ISAR1_API_IMP_DEF 0x1 +#define ID_AA64ISAR1_API_IMP_DEF_EPAC 0x2 +#define ID_AA64ISAR1_API_IMP_DEF_EPAC2 0x3 +#define ID_AA64ISAR1_API_IMP_DEF_EPAC2_FPAC 0x4 +#define ID_AA64ISAR1_API_IMP_DEF_EPAC2_FPAC_CMB 0x5 +#define ID_AA64ISAR1_GPA_NI 0x0 +#define ID_AA64ISAR1_GPA_ARCHITECTED 0x1 +#define ID_AA64ISAR1_GPI_NI 0x0 +#define ID_AA64ISAR1_GPI_IMP_DEF 0x1 + +/* id_aa64pfr0 */ +#define ID_AA64PFR0_CSV3_SHIFT 60 +#define ID_AA64PFR0_CSV2_SHIFT 56 +#define ID_AA64PFR0_DIT_SHIFT 48 +#define ID_AA64PFR0_AMU_SHIFT 44 +#define ID_AA64PFR0_MPAM_SHIFT 40 +#define ID_AA64PFR0_SEL2_SHIFT 36 +#define ID_AA64PFR0_SVE_SHIFT 32 +#define ID_AA64PFR0_RAS_SHIFT 28 +#define ID_AA64PFR0_GIC_SHIFT 24 +#define ID_AA64PFR0_ASIMD_SHIFT 20 +#define ID_AA64PFR0_FP_SHIFT 16 +#define ID_AA64PFR0_EL3_SHIFT 12 +#define ID_AA64PFR0_EL2_SHIFT 8 +#define ID_AA64PFR0_EL1_SHIFT 4 +#define ID_AA64PFR0_EL0_SHIFT 0 + +#define ID_AA64PFR0_AMU 0x1 +#define ID_AA64PFR0_SVE 0x1 +#define ID_AA64PFR0_RAS_V1 0x1 +#define ID_AA64PFR0_RAS_V1P1 0x2 +#define ID_AA64PFR0_FP_NI 0xf +#define ID_AA64PFR0_FP_SUPPORTED 0x0 +#define ID_AA64PFR0_ASIMD_NI 0xf +#define ID_AA64PFR0_ASIMD_SUPPORTED 0x0 +#define ID_AA64PFR0_ELx_64BIT_ONLY 0x1 +#define ID_AA64PFR0_ELx_32BIT_64BIT 0x2 + +/* id_aa64pfr1 */ +#define ID_AA64PFR1_MPAMFRAC_SHIFT 16 +#define ID_AA64PFR1_RASFRAC_SHIFT 12 +#define ID_AA64PFR1_MTE_SHIFT 8 +#define ID_AA64PFR1_SSBS_SHIFT 4 +#define ID_AA64PFR1_BT_SHIFT 0 + +#define ID_AA64PFR1_SSBS_PSTATE_NI 0 +#define ID_AA64PFR1_SSBS_PSTATE_ONLY 1 +#define ID_AA64PFR1_SSBS_PSTATE_INSNS 2 +#define ID_AA64PFR1_BT_BTI 0x1 + +#define ID_AA64PFR1_MTE_NI 0x0 +#define ID_AA64PFR1_MTE_EL0 0x1 +#define ID_AA64PFR1_MTE 0x2 + +/* id_aa64zfr0 */ +#define ID_AA64ZFR0_F64MM_SHIFT 56 +#define ID_AA64ZFR0_F32MM_SHIFT 52 +#define ID_AA64ZFR0_I8MM_SHIFT 44 +#define ID_AA64ZFR0_SM4_SHIFT 40 +#define ID_AA64ZFR0_SHA3_SHIFT 32 +#define ID_AA64ZFR0_BF16_SHIFT 20 +#define ID_AA64ZFR0_BITPERM_SHIFT 16 +#define ID_AA64ZFR0_AES_SHIFT 4 +#define ID_AA64ZFR0_SVEVER_SHIFT 0 + +#define ID_AA64ZFR0_F64MM 0x1 +#define ID_AA64ZFR0_F32MM 0x1 +#define ID_AA64ZFR0_I8MM 0x1 +#define ID_AA64ZFR0_BF16 0x1 +#define ID_AA64ZFR0_SM4 0x1 +#define ID_AA64ZFR0_SHA3 0x1 +#define ID_AA64ZFR0_BITPERM 0x1 +#define ID_AA64ZFR0_AES 0x1 +#define ID_AA64ZFR0_AES_PMULL 0x2 +#define ID_AA64ZFR0_SVEVER_SVE2 0x1 + +/* id_aa64mmfr0 */ +#define ID_AA64MMFR0_ECV_SHIFT 60 +#define ID_AA64MMFR0_FGT_SHIFT 56 +#define ID_AA64MMFR0_EXS_SHIFT 44 +#define ID_AA64MMFR0_TGRAN4_2_SHIFT 40 +#define ID_AA64MMFR0_TGRAN64_2_SHIFT 36 +#define ID_AA64MMFR0_TGRAN16_2_SHIFT 32 +#define ID_AA64MMFR0_TGRAN4_SHIFT 28 +#define ID_AA64MMFR0_TGRAN64_SHIFT 24 +#define ID_AA64MMFR0_TGRAN16_SHIFT 20 +#define ID_AA64MMFR0_BIGENDEL0_SHIFT 16 +#define ID_AA64MMFR0_SNSMEM_SHIFT 12 +#define ID_AA64MMFR0_BIGENDEL_SHIFT 8 +#define ID_AA64MMFR0_ASID_SHIFT 4 +#define ID_AA64MMFR0_PARANGE_SHIFT 0 + +#define ID_AA64MMFR0_ASID_8 0x0 +#define ID_AA64MMFR0_ASID_16 0x2 + +#define ID_AA64MMFR0_TGRAN4_NI 0xf +#define ID_AA64MMFR0_TGRAN4_SUPPORTED_MIN 0x0 +#define ID_AA64MMFR0_TGRAN4_SUPPORTED_MAX 0x7 +#define ID_AA64MMFR0_TGRAN64_NI 0xf +#define ID_AA64MMFR0_TGRAN64_SUPPORTED_MIN 0x0 +#define ID_AA64MMFR0_TGRAN64_SUPPORTED_MAX 0x7 +#define ID_AA64MMFR0_TGRAN16_NI 0x0 +#define ID_AA64MMFR0_TGRAN16_SUPPORTED_MIN 0x1 +#define ID_AA64MMFR0_TGRAN16_SUPPORTED_MAX 0xf + +#define ID_AA64MMFR0_PARANGE_32 0x0 +#define ID_AA64MMFR0_PARANGE_36 0x1 +#define ID_AA64MMFR0_PARANGE_40 0x2 +#define ID_AA64MMFR0_PARANGE_42 0x3 +#define ID_AA64MMFR0_PARANGE_44 0x4 +#define ID_AA64MMFR0_PARANGE_48 0x5 +#define ID_AA64MMFR0_PARANGE_52 0x6 + +#define ARM64_MIN_PARANGE_BITS 32 + +#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_DEFAULT 0x0 +#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_NONE 0x1 +#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_MIN 0x2 +#define ID_AA64MMFR0_TGRAN_2_SUPPORTED_MAX 0x7 + +#ifdef CONFIG_ARM64_PA_BITS_52 +#define ID_AA64MMFR0_PARANGE_MAX ID_AA64MMFR0_PARANGE_52 +#else +#define ID_AA64MMFR0_PARANGE_MAX ID_AA64MMFR0_PARANGE_48 +#endif + +/* id_aa64mmfr1 */ +#define ID_AA64MMFR1_ETS_SHIFT 36 +#define ID_AA64MMFR1_TWED_SHIFT 32 +#define ID_AA64MMFR1_XNX_SHIFT 28 +#define ID_AA64MMFR1_SPECSEI_SHIFT 24 +#define ID_AA64MMFR1_PAN_SHIFT 20 +#define ID_AA64MMFR1_LOR_SHIFT 16 +#define ID_AA64MMFR1_HPD_SHIFT 12 +#define ID_AA64MMFR1_VHE_SHIFT 8 +#define ID_AA64MMFR1_VMIDBITS_SHIFT 4 +#define ID_AA64MMFR1_HADBS_SHIFT 0 + +#define ID_AA64MMFR1_VMIDBITS_8 0 +#define ID_AA64MMFR1_VMIDBITS_16 2 + +/* id_aa64mmfr2 */ +#define ID_AA64MMFR2_E0PD_SHIFT 60 +#define ID_AA64MMFR2_EVT_SHIFT 56 +#define ID_AA64MMFR2_BBM_SHIFT 52 +#define ID_AA64MMFR2_TTL_SHIFT 48 +#define ID_AA64MMFR2_FWB_SHIFT 40 +#define ID_AA64MMFR2_IDS_SHIFT 36 +#define ID_AA64MMFR2_AT_SHIFT 32 +#define ID_AA64MMFR2_ST_SHIFT 28 +#define ID_AA64MMFR2_NV_SHIFT 24 +#define ID_AA64MMFR2_CCIDX_SHIFT 20 +#define ID_AA64MMFR2_LVA_SHIFT 16 +#define ID_AA64MMFR2_IESB_SHIFT 12 +#define ID_AA64MMFR2_LSM_SHIFT 8 +#define ID_AA64MMFR2_UAO_SHIFT 4 +#define ID_AA64MMFR2_CNP_SHIFT 0 + +/* id_aa64dfr0 */ +#define ID_AA64DFR0_MTPMU_SHIFT 48 +#define ID_AA64DFR0_TRBE_SHIFT 44 +#define ID_AA64DFR0_TRACE_FILT_SHIFT 40 +#define ID_AA64DFR0_DOUBLELOCK_SHIFT 36 +#define ID_AA64DFR0_PMSVER_SHIFT 32 +#define ID_AA64DFR0_CTX_CMPS_SHIFT 28 +#define ID_AA64DFR0_WRPS_SHIFT 20 +#define ID_AA64DFR0_BRPS_SHIFT 12 +#define ID_AA64DFR0_PMUVER_SHIFT 8 +#define ID_AA64DFR0_TRACEVER_SHIFT 4 +#define ID_AA64DFR0_DEBUGVER_SHIFT 0 + +#define ID_AA64DFR0_PMUVER_8_0 0x1 +#define ID_AA64DFR0_PMUVER_8_1 0x4 +#define ID_AA64DFR0_PMUVER_8_4 0x5 +#define ID_AA64DFR0_PMUVER_8_5 0x6 +#define ID_AA64DFR0_PMUVER_IMP_DEF 0xf + +#define ID_AA64DFR0_PMSVER_8_2 0x1 +#define ID_AA64DFR0_PMSVER_8_3 0x2 + +#define ID_DFR0_PERFMON_SHIFT 24 + +#define ID_DFR0_PERFMON_8_0 0x3 +#define ID_DFR0_PERFMON_8_1 0x4 +#define ID_DFR0_PERFMON_8_4 0x5 +#define ID_DFR0_PERFMON_8_5 0x6 + +#define ID_ISAR4_SWP_FRAC_SHIFT 28 +#define ID_ISAR4_PSR_M_SHIFT 24 +#define ID_ISAR4_SYNCH_PRIM_FRAC_SHIFT 20 +#define ID_ISAR4_BARRIER_SHIFT 16 +#define ID_ISAR4_SMC_SHIFT 12 +#define ID_ISAR4_WRITEBACK_SHIFT 8 +#define ID_ISAR4_WITHSHIFTS_SHIFT 4 +#define ID_ISAR4_UNPRIV_SHIFT 0 + +#define ID_DFR1_MTPMU_SHIFT 0 + +#define ID_ISAR0_DIVIDE_SHIFT 24 +#define ID_ISAR0_DEBUG_SHIFT 20 +#define ID_ISAR0_COPROC_SHIFT 16 +#define ID_ISAR0_CMPBRANCH_SHIFT 12 +#define ID_ISAR0_BITFIELD_SHIFT 8 +#define ID_ISAR0_BITCOUNT_SHIFT 4 +#define ID_ISAR0_SWAP_SHIFT 0 + +#define ID_ISAR5_RDM_SHIFT 24 +#define ID_ISAR5_CRC32_SHIFT 16 +#define ID_ISAR5_SHA2_SHIFT 12 +#define ID_ISAR5_SHA1_SHIFT 8 +#define ID_ISAR5_AES_SHIFT 4 +#define ID_ISAR5_SEVL_SHIFT 0 + +#define ID_ISAR6_I8MM_SHIFT 24 +#define ID_ISAR6_BF16_SHIFT 20 +#define ID_ISAR6_SPECRES_SHIFT 16 +#define ID_ISAR6_SB_SHIFT 12 +#define ID_ISAR6_FHM_SHIFT 8 +#define ID_ISAR6_DP_SHIFT 4 +#define ID_ISAR6_JSCVT_SHIFT 0 + +#define ID_MMFR0_INNERSHR_SHIFT 28 +#define ID_MMFR0_FCSE_SHIFT 24 +#define ID_MMFR0_AUXREG_SHIFT 20 +#define ID_MMFR0_TCM_SHIFT 16 +#define ID_MMFR0_SHARELVL_SHIFT 12 +#define ID_MMFR0_OUTERSHR_SHIFT 8 +#define ID_MMFR0_PMSA_SHIFT 4 +#define ID_MMFR0_VMSA_SHIFT 0 + +#define ID_MMFR4_EVT_SHIFT 28 +#define ID_MMFR4_CCIDX_SHIFT 24 +#define ID_MMFR4_LSM_SHIFT 20 +#define ID_MMFR4_HPDS_SHIFT 16 +#define ID_MMFR4_CNP_SHIFT 12 +#define ID_MMFR4_XNX_SHIFT 8 +#define ID_MMFR4_AC2_SHIFT 4 +#define ID_MMFR4_SPECSEI_SHIFT 0 + +#define ID_MMFR5_ETS_SHIFT 0 + +#define ID_PFR0_DIT_SHIFT 24 +#define ID_PFR0_CSV2_SHIFT 16 +#define ID_PFR0_STATE3_SHIFT 12 +#define ID_PFR0_STATE2_SHIFT 8 +#define ID_PFR0_STATE1_SHIFT 4 +#define ID_PFR0_STATE0_SHIFT 0 + +#define ID_DFR0_PERFMON_SHIFT 24 +#define ID_DFR0_MPROFDBG_SHIFT 20 +#define ID_DFR0_MMAPTRC_SHIFT 16 +#define ID_DFR0_COPTRC_SHIFT 12 +#define ID_DFR0_MMAPDBG_SHIFT 8 +#define ID_DFR0_COPSDBG_SHIFT 4 +#define ID_DFR0_COPDBG_SHIFT 0 + +#define ID_PFR2_SSBS_SHIFT 4 +#define ID_PFR2_CSV3_SHIFT 0 + +#define MVFR0_FPROUND_SHIFT 28 +#define MVFR0_FPSHVEC_SHIFT 24 +#define MVFR0_FPSQRT_SHIFT 20 +#define MVFR0_FPDIVIDE_SHIFT 16 +#define MVFR0_FPTRAP_SHIFT 12 +#define MVFR0_FPDP_SHIFT 8 +#define MVFR0_FPSP_SHIFT 4 +#define MVFR0_SIMD_SHIFT 0 + +#define MVFR1_SIMDFMAC_SHIFT 28 +#define MVFR1_FPHP_SHIFT 24 +#define MVFR1_SIMDHP_SHIFT 20 +#define MVFR1_SIMDSP_SHIFT 16 +#define MVFR1_SIMDINT_SHIFT 12 +#define MVFR1_SIMDLS_SHIFT 8 +#define MVFR1_FPDNAN_SHIFT 4 +#define MVFR1_FPFTZ_SHIFT 0 + +#define ID_PFR1_GIC_SHIFT 28 +#define ID_PFR1_VIRT_FRAC_SHIFT 24 +#define ID_PFR1_SEC_FRAC_SHIFT 20 +#define ID_PFR1_GENTIMER_SHIFT 16 +#define ID_PFR1_VIRTUALIZATION_SHIFT 12 +#define ID_PFR1_MPROGMOD_SHIFT 8 +#define ID_PFR1_SECURITY_SHIFT 4 +#define ID_PFR1_PROGMOD_SHIFT 0 + +#if defined(CONFIG_ARM64_4K_PAGES) +#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN4_SHIFT +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN4_SUPPORTED_MIN +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_TGRAN4_SUPPORTED_MAX +#define ID_AA64MMFR0_TGRAN_2_SHIFT ID_AA64MMFR0_TGRAN4_2_SHIFT +#elif defined(CONFIG_ARM64_16K_PAGES) +#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN16_SHIFT +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN16_SUPPORTED_MIN +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_TGRAN16_SUPPORTED_MAX +#define ID_AA64MMFR0_TGRAN_2_SHIFT ID_AA64MMFR0_TGRAN16_2_SHIFT +#elif defined(CONFIG_ARM64_64K_PAGES) +#define ID_AA64MMFR0_TGRAN_SHIFT ID_AA64MMFR0_TGRAN64_SHIFT +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN ID_AA64MMFR0_TGRAN64_SUPPORTED_MIN +#define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX ID_AA64MMFR0_TGRAN64_SUPPORTED_MAX +#define ID_AA64MMFR0_TGRAN_2_SHIFT ID_AA64MMFR0_TGRAN64_2_SHIFT +#endif + +#define MVFR2_FPMISC_SHIFT 4 +#define MVFR2_SIMDMISC_SHIFT 0 + +#define DCZID_DZP_SHIFT 4 +#define DCZID_BS_SHIFT 0 + +/* + * The ZCR_ELx_LEN_* definitions intentionally include bits [8:4] which + * are reserved by the SVE architecture for future expansion of the LEN + * field, with compatible semantics. + */ +#define ZCR_ELx_LEN_SHIFT 0 +#define ZCR_ELx_LEN_SIZE 9 +#define ZCR_ELx_LEN_MASK 0x1ff + +#define CPACR_EL1_ZEN_EL1EN (BIT(16)) /* enable EL1 access */ +#define CPACR_EL1_ZEN_EL0EN (BIT(17)) /* enable EL0 access, if EL1EN set */ +#define CPACR_EL1_ZEN (CPACR_EL1_ZEN_EL1EN | CPACR_EL1_ZEN_EL0EN) + +/* TCR EL1 Bit Definitions */ +#define SYS_TCR_EL1_TCMA1 (BIT(58)) +#define SYS_TCR_EL1_TCMA0 (BIT(57)) + +/* GCR_EL1 Definitions */ +#define SYS_GCR_EL1_RRND (BIT(16)) +#define SYS_GCR_EL1_EXCL_MASK 0xffffUL + +/* RGSR_EL1 Definitions */ +#define SYS_RGSR_EL1_TAG_MASK 0xfUL +#define SYS_RGSR_EL1_SEED_SHIFT 8 +#define SYS_RGSR_EL1_SEED_MASK 0xffffUL + +/* GMID_EL1 field definitions */ +#define SYS_GMID_EL1_BS_SHIFT 0 +#define SYS_GMID_EL1_BS_SIZE 4 + +/* TFSR{,E0}_EL1 bit definitions */ +#define SYS_TFSR_EL1_TF0_SHIFT 0 +#define SYS_TFSR_EL1_TF1_SHIFT 1 +#define SYS_TFSR_EL1_TF0 (UL(1) << SYS_TFSR_EL1_TF0_SHIFT) +#define SYS_TFSR_EL1_TF1 (UL(1) << SYS_TFSR_EL1_TF1_SHIFT) + +/* Safe value for MPIDR_EL1: Bit31:RES1, Bit30:U:0, Bit24:MT:0 */ +#define SYS_MPIDR_SAFE_VAL (BIT(31)) + +#define TRFCR_ELx_TS_SHIFT 5 +#define TRFCR_ELx_TS_VIRTUAL ((0x1UL) << TRFCR_ELx_TS_SHIFT) +#define TRFCR_ELx_TS_GUEST_PHYSICAL ((0x2UL) << TRFCR_ELx_TS_SHIFT) +#define TRFCR_ELx_TS_PHYSICAL ((0x3UL) << TRFCR_ELx_TS_SHIFT) +#define TRFCR_EL2_CX BIT(3) +#define TRFCR_ELx_ExTRE BIT(1) +#define TRFCR_ELx_E0TRE BIT(0) + + +/* GIC Hypervisor interface registers */ +/* ICH_MISR_EL2 bit definitions */ +#define ICH_MISR_EOI (1 << 0) +#define ICH_MISR_U (1 << 1) + +/* ICH_LR*_EL2 bit definitions */ +#define ICH_LR_VIRTUAL_ID_MASK ((1ULL << 32) - 1) + +#define ICH_LR_EOI (1ULL << 41) +#define ICH_LR_GROUP (1ULL << 60) +#define ICH_LR_HW (1ULL << 61) +#define ICH_LR_STATE (3ULL << 62) +#define ICH_LR_PENDING_BIT (1ULL << 62) +#define ICH_LR_ACTIVE_BIT (1ULL << 63) +#define ICH_LR_PHYS_ID_SHIFT 32 +#define ICH_LR_PHYS_ID_MASK (0x3ffULL << ICH_LR_PHYS_ID_SHIFT) +#define ICH_LR_PRIORITY_SHIFT 48 +#define ICH_LR_PRIORITY_MASK (0xffULL << ICH_LR_PRIORITY_SHIFT) + +/* ICH_HCR_EL2 bit definitions */ +#define ICH_HCR_EN (1 << 0) +#define ICH_HCR_UIE (1 << 1) +#define ICH_HCR_NPIE (1 << 3) +#define ICH_HCR_TC (1 << 10) +#define ICH_HCR_TALL0 (1 << 11) +#define ICH_HCR_TALL1 (1 << 12) +#define ICH_HCR_EOIcount_SHIFT 27 +#define ICH_HCR_EOIcount_MASK (0x1f << ICH_HCR_EOIcount_SHIFT) + +/* ICH_VMCR_EL2 bit definitions */ +#define ICH_VMCR_ACK_CTL_SHIFT 2 +#define ICH_VMCR_ACK_CTL_MASK (1 << ICH_VMCR_ACK_CTL_SHIFT) +#define ICH_VMCR_FIQ_EN_SHIFT 3 +#define ICH_VMCR_FIQ_EN_MASK (1 << ICH_VMCR_FIQ_EN_SHIFT) +#define ICH_VMCR_CBPR_SHIFT 4 +#define ICH_VMCR_CBPR_MASK (1 << ICH_VMCR_CBPR_SHIFT) +#define ICH_VMCR_EOIM_SHIFT 9 +#define ICH_VMCR_EOIM_MASK (1 << ICH_VMCR_EOIM_SHIFT) +#define ICH_VMCR_BPR1_SHIFT 18 +#define ICH_VMCR_BPR1_MASK (7 << ICH_VMCR_BPR1_SHIFT) +#define ICH_VMCR_BPR0_SHIFT 21 +#define ICH_VMCR_BPR0_MASK (7 << ICH_VMCR_BPR0_SHIFT) +#define ICH_VMCR_PMR_SHIFT 24 +#define ICH_VMCR_PMR_MASK (0xffUL << ICH_VMCR_PMR_SHIFT) +#define ICH_VMCR_ENG0_SHIFT 0 +#define ICH_VMCR_ENG0_MASK (1 << ICH_VMCR_ENG0_SHIFT) +#define ICH_VMCR_ENG1_SHIFT 1 +#define ICH_VMCR_ENG1_MASK (1 << ICH_VMCR_ENG1_SHIFT) + +/* ICH_VTR_EL2 bit definitions */ +#define ICH_VTR_PRI_BITS_SHIFT 29 +#define ICH_VTR_PRI_BITS_MASK (7 << ICH_VTR_PRI_BITS_SHIFT) +#define ICH_VTR_ID_BITS_SHIFT 23 +#define ICH_VTR_ID_BITS_MASK (7 << ICH_VTR_ID_BITS_SHIFT) +#define ICH_VTR_SEIS_SHIFT 22 +#define ICH_VTR_SEIS_MASK (1 << ICH_VTR_SEIS_SHIFT) +#define ICH_VTR_A3V_SHIFT 21 +#define ICH_VTR_A3V_MASK (1 << ICH_VTR_A3V_SHIFT) + +#define ARM64_FEATURE_FIELD_BITS 4 + +/* Create a mask for the feature bits of the specified feature. */ +#define ARM64_FEATURE_MASK(x) (GENMASK_ULL(x##_SHIFT + ARM64_FEATURE_FIELD_BITS - 1, x##_SHIFT)) + +#ifdef __ASSEMBLY__ + + .irp num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30 + .equ .L__reg_num_x\num, \num + .endr + .equ .L__reg_num_xzr, 31 + + .macro mrs_s, rt, sreg + __emit_inst(0xd5200000|(\sreg)|(.L__reg_num_\rt)) + .endm + + .macro msr_s, sreg, rt + __emit_inst(0xd5000000|(\sreg)|(.L__reg_num_\rt)) + .endm + +#else + +#include +#include +#include + +#define __DEFINE_MRS_MSR_S_REGNUM \ +" .irp num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30\n" \ +" .equ .L__reg_num_x\\num, \\num\n" \ +" .endr\n" \ +" .equ .L__reg_num_xzr, 31\n" + +#define DEFINE_MRS_S \ + __DEFINE_MRS_MSR_S_REGNUM \ +" .macro mrs_s, rt, sreg\n" \ + __emit_inst(0xd5200000|(\\sreg)|(.L__reg_num_\\rt)) \ +" .endm\n" + +#define DEFINE_MSR_S \ + __DEFINE_MRS_MSR_S_REGNUM \ +" .macro msr_s, sreg, rt\n" \ + __emit_inst(0xd5000000|(\\sreg)|(.L__reg_num_\\rt)) \ +" .endm\n" + +#define UNDEFINE_MRS_S \ +" .purgem mrs_s\n" + +#define UNDEFINE_MSR_S \ +" .purgem msr_s\n" + +#define __mrs_s(v, r) \ + DEFINE_MRS_S \ +" mrs_s " v ", " __stringify(r) "\n" \ + UNDEFINE_MRS_S + +#define __msr_s(r, v) \ + DEFINE_MSR_S \ +" msr_s " __stringify(r) ", " v "\n" \ + UNDEFINE_MSR_S + +/* + * Unlike read_cpuid, calls to read_sysreg are never expected to be + * optimized away or replaced with synthetic values. + */ +#define read_sysreg(r) ({ \ + u64 __val; \ + asm volatile("mrs %0, " __stringify(r) : "=r" (__val)); \ + __val; \ +}) + +/* + * The "Z" constraint normally means a zero immediate, but when combined with + * the "%x0" template means XZR. + */ +#define write_sysreg(v, r) do { \ + u64 __val = (u64)(v); \ + asm volatile("msr " __stringify(r) ", %x0" \ + : : "rZ" (__val)); \ +} while (0) + +/* + * For registers without architectural names, or simply unsupported by + * GAS. + */ +#define read_sysreg_s(r) ({ \ + u64 __val; \ + asm volatile(__mrs_s("%0", r) : "=r" (__val)); \ + __val; \ +}) + +#define write_sysreg_s(v, r) do { \ + u64 __val = (u64)(v); \ + asm volatile(__msr_s(r, "%x0") : : "rZ" (__val)); \ +} while (0) + +/* + * Modify bits in a sysreg. Bits in the clear mask are zeroed, then bits in the + * set mask are set. Other bits are left as-is. + */ +#define sysreg_clear_set(sysreg, clear, set) do { \ + u64 __scs_val = read_sysreg(sysreg); \ + u64 __scs_new = (__scs_val & ~(u64)(clear)) | (set); \ + if (__scs_new != __scs_val) \ + write_sysreg(__scs_new, sysreg); \ +} while (0) + +#define sysreg_clear_set_s(sysreg, clear, set) do { \ + u64 __scs_val = read_sysreg_s(sysreg); \ + u64 __scs_new = (__scs_val & ~(u64)(clear)) | (set); \ + if (__scs_new != __scs_val) \ + write_sysreg_s(__scs_new, sysreg); \ +} while (0) + +#define read_sysreg_par() ({ \ + u64 par; \ + asm(ALTERNATIVE("nop", "dmb sy", ARM64_WORKAROUND_1508412)); \ + par = read_sysreg(par_el1); \ + asm(ALTERNATIVE("nop", "dmb sy", ARM64_WORKAROUND_1508412)); \ + par; \ +}) + +#endif + +#endif /* __ASM_SYSREG_H */ diff --git a/tools/testing/selftests/kvm/aarch64/debug-exceptions.c b/tools/testing/selftests/kvm/aarch64/debug-exceptions.c index e5e6c92b60da..11fd23e21cb4 100644 --- a/tools/testing/selftests/kvm/aarch64/debug-exceptions.c +++ b/tools/testing/selftests/kvm/aarch64/debug-exceptions.c @@ -34,16 +34,16 @@ static void reset_debug_state(void) { asm volatile("msr daifset, #8"); - write_sysreg(osdlr_el1, 0); - write_sysreg(oslar_el1, 0); + write_sysreg(0, osdlr_el1); + write_sysreg(0, oslar_el1); isb(); - write_sysreg(mdscr_el1, 0); + write_sysreg(0, mdscr_el1); /* This test only uses the first bp and wp slot. */ - write_sysreg(dbgbvr0_el1, 0); - write_sysreg(dbgbcr0_el1, 0); - write_sysreg(dbgwcr0_el1, 0); - write_sysreg(dbgwvr0_el1, 0); + write_sysreg(0, dbgbvr0_el1); + write_sysreg(0, dbgbcr0_el1); + write_sysreg(0, dbgwcr0_el1); + write_sysreg(0, dbgwvr0_el1); isb(); } @@ -53,14 +53,14 @@ static void install_wp(uint64_t addr) uint32_t mdscr; wcr = DBGWCR_LEN8 | DBGWCR_RD | DBGWCR_WR | DBGWCR_EL1 | DBGWCR_E; - write_sysreg(dbgwcr0_el1, wcr); - write_sysreg(dbgwvr0_el1, addr); + write_sysreg(wcr, dbgwcr0_el1); + write_sysreg(addr, dbgwvr0_el1); isb(); asm volatile("msr daifclr, #8"); mdscr = read_sysreg(mdscr_el1) | MDSCR_KDE | MDSCR_MDE; - write_sysreg(mdscr_el1, mdscr); + write_sysreg(mdscr, mdscr_el1); isb(); } @@ -70,14 +70,14 @@ static void install_hw_bp(uint64_t addr) uint32_t mdscr; bcr = DBGBCR_LEN8 | DBGBCR_EXEC | DBGBCR_EL1 | DBGBCR_E; - write_sysreg(dbgbcr0_el1, bcr); - write_sysreg(dbgbvr0_el1, addr); + write_sysreg(bcr, dbgbcr0_el1); + write_sysreg(addr, dbgbvr0_el1); isb(); asm volatile("msr daifclr, #8"); mdscr = read_sysreg(mdscr_el1) | MDSCR_KDE | MDSCR_MDE; - write_sysreg(mdscr_el1, mdscr); + write_sysreg(mdscr, mdscr_el1); isb(); } @@ -88,7 +88,7 @@ static void install_ss(void) asm volatile("msr daifclr, #8"); mdscr = read_sysreg(mdscr_el1) | MDSCR_KDE | MDSCR_SS; - write_sysreg(mdscr_el1, mdscr); + write_sysreg(mdscr, mdscr_el1); isb(); } diff --git a/tools/testing/selftests/kvm/include/aarch64/processor.h b/tools/testing/selftests/kvm/include/aarch64/processor.h index 96578bd46a85..7989e832cafb 100644 --- a/tools/testing/selftests/kvm/include/aarch64/processor.h +++ b/tools/testing/selftests/kvm/include/aarch64/processor.h @@ -10,6 +10,7 @@ #include "kvm_util.h" #include #include +#include #define ARM64_CORE_REG(x) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \ @@ -119,18 +120,6 @@ void vm_install_exception_handler(struct kvm_vm *vm, void vm_install_sync_handler(struct kvm_vm *vm, int vector, int ec, handler_fn handler); -#define write_sysreg(reg, val) \ -({ \ - u64 __val = (u64)(val); \ - asm volatile("msr " __stringify(reg) ", %x0" : : "rZ" (__val)); \ -}) - -#define read_sysreg(reg) \ -({ u64 val; \ - asm volatile("mrs %0, "__stringify(reg) : "=r"(val) : : "memory");\ - val; \ -}) - #define isb() asm volatile("isb" : : : "memory") #define dsb(opt) asm volatile("dsb " #opt : : : "memory") #define dmb(opt) asm volatile("dmb " #opt : : : "memory") -- cgit From b3c79c6130bcfdb0ff3819077deaddce981a0718 Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:28 +0000 Subject: KVM: arm64: selftests: Introduce ARM64_SYS_KVM_REG With the inclusion of sysreg.h, that brings in system register encodings, it would be redundant to re-define register encodings again in processor.h to use it with ARM64_SYS_REG for the KVM functions such as set_reg() or get_reg(). Hence, add helper macro, ARM64_SYS_KVM_REG, that converts SYS_* definitions in sysreg.h into ARM64_SYS_REG definitions. Also replace all the users of ARM64_SYS_REG, relying on the encodings created in processor.h, with ARM64_SYS_KVM_REG and remove the definitions. Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Ricardo Koller Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-5-rananta@google.com --- .../testing/selftests/kvm/aarch64/debug-exceptions.c | 2 +- .../testing/selftests/kvm/aarch64/psci_cpu_on_test.c | 2 +- .../selftests/kvm/include/aarch64/processor.h | 20 +++++++++++--------- tools/testing/selftests/kvm/lib/aarch64/processor.c | 16 ++++++++-------- 4 files changed, 21 insertions(+), 19 deletions(-) diff --git a/tools/testing/selftests/kvm/aarch64/debug-exceptions.c b/tools/testing/selftests/kvm/aarch64/debug-exceptions.c index 11fd23e21cb4..ea189d83abf7 100644 --- a/tools/testing/selftests/kvm/aarch64/debug-exceptions.c +++ b/tools/testing/selftests/kvm/aarch64/debug-exceptions.c @@ -190,7 +190,7 @@ static int debug_version(struct kvm_vm *vm) { uint64_t id_aa64dfr0; - get_reg(vm, VCPU_ID, ARM64_SYS_REG(ID_AA64DFR0_EL1), &id_aa64dfr0); + get_reg(vm, VCPU_ID, KVM_ARM64_SYS_REG(SYS_ID_AA64DFR0_EL1), &id_aa64dfr0); return id_aa64dfr0 & 0xf; } diff --git a/tools/testing/selftests/kvm/aarch64/psci_cpu_on_test.c b/tools/testing/selftests/kvm/aarch64/psci_cpu_on_test.c index 018c269990e1..4c5f6814030f 100644 --- a/tools/testing/selftests/kvm/aarch64/psci_cpu_on_test.c +++ b/tools/testing/selftests/kvm/aarch64/psci_cpu_on_test.c @@ -91,7 +91,7 @@ int main(void) init.features[0] |= (1 << KVM_ARM_VCPU_POWER_OFF); aarch64_vcpu_add_default(vm, VCPU_ID_TARGET, &init, guest_main); - get_reg(vm, VCPU_ID_TARGET, ARM64_SYS_REG(MPIDR_EL1), &target_mpidr); + get_reg(vm, VCPU_ID_TARGET, KVM_ARM64_SYS_REG(SYS_MPIDR_EL1), &target_mpidr); vcpu_args_set(vm, VCPU_ID_SOURCE, 1, target_mpidr & MPIDR_HWID_BITMASK); vcpu_run(vm, VCPU_ID_SOURCE); diff --git a/tools/testing/selftests/kvm/include/aarch64/processor.h b/tools/testing/selftests/kvm/include/aarch64/processor.h index 7989e832cafb..93797783abad 100644 --- a/tools/testing/selftests/kvm/include/aarch64/processor.h +++ b/tools/testing/selftests/kvm/include/aarch64/processor.h @@ -16,15 +16,17 @@ #define ARM64_CORE_REG(x) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \ KVM_REG_ARM_CORE | KVM_REG_ARM_CORE_REG(x)) -#define CPACR_EL1 3, 0, 1, 0, 2 -#define TCR_EL1 3, 0, 2, 0, 2 -#define MAIR_EL1 3, 0, 10, 2, 0 -#define MPIDR_EL1 3, 0, 0, 0, 5 -#define TTBR0_EL1 3, 0, 2, 0, 0 -#define SCTLR_EL1 3, 0, 1, 0, 0 -#define VBAR_EL1 3, 0, 12, 0, 0 - -#define ID_AA64DFR0_EL1 3, 0, 0, 5, 0 +/* + * KVM_ARM64_SYS_REG(sys_reg_id): Helper macro to convert + * SYS_* register definitions in asm/sysreg.h to use in KVM + * calls such as get_reg() and set_reg(). + */ +#define KVM_ARM64_SYS_REG(sys_reg_id) \ + ARM64_SYS_REG(sys_reg_Op0(sys_reg_id), \ + sys_reg_Op1(sys_reg_id), \ + sys_reg_CRn(sys_reg_id), \ + sys_reg_CRm(sys_reg_id), \ + sys_reg_Op2(sys_reg_id)) /* * Default MAIR diff --git a/tools/testing/selftests/kvm/lib/aarch64/processor.c b/tools/testing/selftests/kvm/lib/aarch64/processor.c index 632b74d6b3ca..db64ee206064 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/processor.c +++ b/tools/testing/selftests/kvm/lib/aarch64/processor.c @@ -232,10 +232,10 @@ void aarch64_vcpu_setup(struct kvm_vm *vm, int vcpuid, struct kvm_vcpu_init *ini * Enable FP/ASIMD to avoid trapping when accessing Q0-Q15 * registers, which the variable argument list macros do. */ - set_reg(vm, vcpuid, ARM64_SYS_REG(CPACR_EL1), 3 << 20); + set_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_CPACR_EL1), 3 << 20); - get_reg(vm, vcpuid, ARM64_SYS_REG(SCTLR_EL1), &sctlr_el1); - get_reg(vm, vcpuid, ARM64_SYS_REG(TCR_EL1), &tcr_el1); + get_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_SCTLR_EL1), &sctlr_el1); + get_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_TCR_EL1), &tcr_el1); switch (vm->mode) { case VM_MODE_P52V48_4K: @@ -273,10 +273,10 @@ void aarch64_vcpu_setup(struct kvm_vm *vm, int vcpuid, struct kvm_vcpu_init *ini tcr_el1 |= (1 << 8) | (1 << 10) | (3 << 12); tcr_el1 |= (64 - vm->va_bits) /* T0SZ */; - set_reg(vm, vcpuid, ARM64_SYS_REG(SCTLR_EL1), sctlr_el1); - set_reg(vm, vcpuid, ARM64_SYS_REG(TCR_EL1), tcr_el1); - set_reg(vm, vcpuid, ARM64_SYS_REG(MAIR_EL1), DEFAULT_MAIR_EL1); - set_reg(vm, vcpuid, ARM64_SYS_REG(TTBR0_EL1), vm->pgd); + set_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_SCTLR_EL1), sctlr_el1); + set_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_TCR_EL1), tcr_el1); + set_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_MAIR_EL1), DEFAULT_MAIR_EL1); + set_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_TTBR0_EL1), vm->pgd); } void vcpu_dump(FILE *stream, struct kvm_vm *vm, uint32_t vcpuid, uint8_t indent) @@ -362,7 +362,7 @@ void vcpu_init_descriptor_tables(struct kvm_vm *vm, uint32_t vcpuid) { extern char vectors; - set_reg(vm, vcpuid, ARM64_SYS_REG(VBAR_EL1), (uint64_t)&vectors); + set_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_VBAR_EL1), (uint64_t)&vectors); } void route_exception(struct ex_regs *regs, int vector) -- cgit From 740826ec02a65a5b25335fddfe8bce4ac99c7a11 Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:29 +0000 Subject: KVM: arm64: selftests: Add support for cpu_relax Implement the guest helper routine, cpu_relax(), to yield the processor to other tasks. The function was derived from arch/arm64/include/asm/vdso/processor.h. Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Oliver Upton Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-6-rananta@google.com --- tools/testing/selftests/kvm/include/aarch64/processor.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/tools/testing/selftests/kvm/include/aarch64/processor.h b/tools/testing/selftests/kvm/include/aarch64/processor.h index 93797783abad..265054c24481 100644 --- a/tools/testing/selftests/kvm/include/aarch64/processor.h +++ b/tools/testing/selftests/kvm/include/aarch64/processor.h @@ -122,6 +122,11 @@ void vm_install_exception_handler(struct kvm_vm *vm, void vm_install_sync_handler(struct kvm_vm *vm, int vector, int ec, handler_fn handler); +static inline void cpu_relax(void) +{ + asm volatile("yield" ::: "memory"); +} + #define isb() asm volatile("isb" : : : "memory") #define dsb(opt) asm volatile("dsb " #opt : : : "memory") #define dmb(opt) asm volatile("dmb " #opt : : : "memory") -- cgit From d977ed39940231839f6856637fe24f41860f7969 Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:30 +0000 Subject: KVM: arm64: selftests: Add basic support for arch_timers Add a minimalistic library support to access the virtual timers, that can be used for simple timing functionalities, such as introducing delays in the guest. Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-7-rananta@google.com --- .../selftests/kvm/include/aarch64/arch_timer.h | 142 +++++++++++++++++++++ 1 file changed, 142 insertions(+) create mode 100644 tools/testing/selftests/kvm/include/aarch64/arch_timer.h diff --git a/tools/testing/selftests/kvm/include/aarch64/arch_timer.h b/tools/testing/selftests/kvm/include/aarch64/arch_timer.h new file mode 100644 index 000000000000..cb7c03de3a21 --- /dev/null +++ b/tools/testing/selftests/kvm/include/aarch64/arch_timer.h @@ -0,0 +1,142 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ARM Generic Timer specific interface + */ + +#ifndef SELFTEST_KVM_ARCH_TIMER_H +#define SELFTEST_KVM_ARCH_TIMER_H + +#include "processor.h" + +enum arch_timer { + VIRTUAL, + PHYSICAL, +}; + +#define CTL_ENABLE (1 << 0) +#define CTL_IMASK (1 << 1) +#define CTL_ISTATUS (1 << 2) + +#define msec_to_cycles(msec) \ + (timer_get_cntfrq() * (uint64_t)(msec) / 1000) + +#define usec_to_cycles(usec) \ + (timer_get_cntfrq() * (uint64_t)(usec) / 1000000) + +#define cycles_to_usec(cycles) \ + ((uint64_t)(cycles) * 1000000 / timer_get_cntfrq()) + +static inline uint32_t timer_get_cntfrq(void) +{ + return read_sysreg(cntfrq_el0); +} + +static inline uint64_t timer_get_cntct(enum arch_timer timer) +{ + isb(); + + switch (timer) { + case VIRTUAL: + return read_sysreg(cntvct_el0); + case PHYSICAL: + return read_sysreg(cntpct_el0); + default: + GUEST_ASSERT_1(0, timer); + } + + /* We should not reach here */ + return 0; +} + +static inline void timer_set_cval(enum arch_timer timer, uint64_t cval) +{ + switch (timer) { + case VIRTUAL: + write_sysreg(cval, cntv_cval_el0); + break; + case PHYSICAL: + write_sysreg(cval, cntp_cval_el0); + break; + default: + GUEST_ASSERT_1(0, timer); + } + + isb(); +} + +static inline uint64_t timer_get_cval(enum arch_timer timer) +{ + switch (timer) { + case VIRTUAL: + return read_sysreg(cntv_cval_el0); + case PHYSICAL: + return read_sysreg(cntp_cval_el0); + default: + GUEST_ASSERT_1(0, timer); + } + + /* We should not reach here */ + return 0; +} + +static inline void timer_set_tval(enum arch_timer timer, uint32_t tval) +{ + switch (timer) { + case VIRTUAL: + write_sysreg(tval, cntv_tval_el0); + break; + case PHYSICAL: + write_sysreg(tval, cntp_tval_el0); + break; + default: + GUEST_ASSERT_1(0, timer); + } + + isb(); +} + +static inline void timer_set_ctl(enum arch_timer timer, uint32_t ctl) +{ + switch (timer) { + case VIRTUAL: + write_sysreg(ctl, cntv_ctl_el0); + break; + case PHYSICAL: + write_sysreg(ctl, cntp_ctl_el0); + break; + default: + GUEST_ASSERT_1(0, timer); + } + + isb(); +} + +static inline uint32_t timer_get_ctl(enum arch_timer timer) +{ + switch (timer) { + case VIRTUAL: + return read_sysreg(cntv_ctl_el0); + case PHYSICAL: + return read_sysreg(cntp_ctl_el0); + default: + GUEST_ASSERT_1(0, timer); + } + + /* We should not reach here */ + return 0; +} + +static inline void timer_set_next_cval_ms(enum arch_timer timer, uint32_t msec) +{ + uint64_t now_ct = timer_get_cntct(timer); + uint64_t next_ct = now_ct + msec_to_cycles(msec); + + timer_set_cval(timer, next_ct); +} + +static inline void timer_set_next_tval_ms(enum arch_timer timer, uint32_t msec) +{ + timer_set_tval(timer, msec_to_cycles(msec)); +} + +#endif /* SELFTEST_KVM_ARCH_TIMER_H */ -- cgit From 80166904655976bb9babc48fd283c2bba5799920 Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:31 +0000 Subject: KVM: arm64: selftests: Add basic support to generate delays Add udelay() support to generate a delay in the guest. The routines are derived and simplified from kernel's arch/arm64/lib/delay.c. Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Andrew Jones Reviewed-by: Oliver Upton Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-8-rananta@google.com --- .../testing/selftests/kvm/include/aarch64/delay.h | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 tools/testing/selftests/kvm/include/aarch64/delay.h diff --git a/tools/testing/selftests/kvm/include/aarch64/delay.h b/tools/testing/selftests/kvm/include/aarch64/delay.h new file mode 100644 index 000000000000..329e4f5079ea --- /dev/null +++ b/tools/testing/selftests/kvm/include/aarch64/delay.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ARM simple delay routines + */ + +#ifndef SELFTEST_KVM_ARM_DELAY_H +#define SELFTEST_KVM_ARM_DELAY_H + +#include "arch_timer.h" + +static inline void __delay(uint64_t cycles) +{ + enum arch_timer timer = VIRTUAL; + uint64_t start = timer_get_cntct(timer); + + while ((timer_get_cntct(timer) - start) < cycles) + cpu_relax(); +} + +static inline void udelay(unsigned long usec) +{ + __delay(usec_to_cycles(usec)); +} + +#endif /* SELFTEST_KVM_ARM_DELAY_H */ -- cgit From 5c636d585cfd0d01a89b18fced77a07ab2ef386a Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:32 +0000 Subject: KVM: arm64: selftests: Add support to disable and enable local IRQs Add functions local_irq_enable() and local_irq_disable() to enable and disable the IRQs from the guest, respectively. Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Oliver Upton Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-9-rananta@google.com --- tools/testing/selftests/kvm/include/aarch64/processor.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/tools/testing/selftests/kvm/include/aarch64/processor.h b/tools/testing/selftests/kvm/include/aarch64/processor.h index 265054c24481..515d04a3c27d 100644 --- a/tools/testing/selftests/kvm/include/aarch64/processor.h +++ b/tools/testing/selftests/kvm/include/aarch64/processor.h @@ -172,4 +172,14 @@ static __always_inline u32 __raw_readl(const volatile void *addr) #define writel(v,c) ({ __iowmb(); writel_relaxed((v),(c));}) #define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(__v); __v; }) +static inline void local_irq_enable(void) +{ + asm volatile("msr daifclr, #3" : : : "memory"); +} + +static inline void local_irq_disable(void) +{ + asm volatile("msr daifset, #3" : : : "memory"); +} + #endif /* SELFTEST_KVM_PROCESSOR_H */ -- cgit From 0226cd531c587e0cd51e5ce5622051d319182506 Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:33 +0000 Subject: KVM: arm64: selftests: Maintain consistency for vcpuid type The prototype of aarch64_vcpu_setup() accepts vcpuid as 'int', while the rest of the aarch64 (and struct vcpu) carries it as 'uint32_t'. Hence, change the prototype to make it consistent throughout the board. Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-10-rananta@google.com --- tools/testing/selftests/kvm/include/aarch64/processor.h | 2 +- tools/testing/selftests/kvm/lib/aarch64/processor.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/include/aarch64/processor.h b/tools/testing/selftests/kvm/include/aarch64/processor.h index 515d04a3c27d..27d8e1bb5b36 100644 --- a/tools/testing/selftests/kvm/include/aarch64/processor.h +++ b/tools/testing/selftests/kvm/include/aarch64/processor.h @@ -63,7 +63,7 @@ static inline void set_reg(struct kvm_vm *vm, uint32_t vcpuid, uint64_t id, uint vcpu_ioctl(vm, vcpuid, KVM_SET_ONE_REG, ®); } -void aarch64_vcpu_setup(struct kvm_vm *vm, int vcpuid, struct kvm_vcpu_init *init); +void aarch64_vcpu_setup(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_vcpu_init *init); void aarch64_vcpu_add_default(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_vcpu_init *init, void *guest_code); diff --git a/tools/testing/selftests/kvm/lib/aarch64/processor.c b/tools/testing/selftests/kvm/lib/aarch64/processor.c index db64ee206064..34f6bd47661f 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/processor.c +++ b/tools/testing/selftests/kvm/lib/aarch64/processor.c @@ -212,7 +212,7 @@ void virt_dump(FILE *stream, struct kvm_vm *vm, uint8_t indent) } } -void aarch64_vcpu_setup(struct kvm_vm *vm, int vcpuid, struct kvm_vcpu_init *init) +void aarch64_vcpu_setup(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_vcpu_init *init) { struct kvm_vcpu_init default_init = { .target = -1, }; uint64_t sctlr_el1, tcr_el1; -- cgit From 17229bdc86c9e618e8832b5ca8451e367e07511b Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:34 +0000 Subject: KVM: arm64: selftests: Add guest support to get the vcpuid At times, such as when in the interrupt handler, the guest wants to get the vcpuid that it's running on to pull the per-cpu private data. As a result, introduce guest_get_vcpuid() that returns the vcpuid of the calling vcpu. The interface is architecture independent, but defined only for arm64 as of now. Suggested-by: Reiji Watanabe Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Ricardo Koller Reviewed-by: Reiji Watanabe Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-11-rananta@google.com --- tools/testing/selftests/kvm/include/kvm_util.h | 2 ++ tools/testing/selftests/kvm/lib/aarch64/processor.c | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/tools/testing/selftests/kvm/include/kvm_util.h b/tools/testing/selftests/kvm/include/kvm_util.h index 010b59b13917..bcf05f5381ed 100644 --- a/tools/testing/selftests/kvm/include/kvm_util.h +++ b/tools/testing/selftests/kvm/include/kvm_util.h @@ -400,4 +400,6 @@ uint64_t get_ucall(struct kvm_vm *vm, uint32_t vcpu_id, struct ucall *uc); int vm_get_stats_fd(struct kvm_vm *vm); int vcpu_get_stats_fd(struct kvm_vm *vm, uint32_t vcpuid); +uint32_t guest_get_vcpuid(void); + #endif /* SELFTEST_KVM_UTIL_H */ diff --git a/tools/testing/selftests/kvm/lib/aarch64/processor.c b/tools/testing/selftests/kvm/lib/aarch64/processor.c index 34f6bd47661f..b4eeeafd2a70 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/processor.c +++ b/tools/testing/selftests/kvm/lib/aarch64/processor.c @@ -277,6 +277,7 @@ void aarch64_vcpu_setup(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_vcpu_init set_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_TCR_EL1), tcr_el1); set_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_MAIR_EL1), DEFAULT_MAIR_EL1); set_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_TTBR0_EL1), vm->pgd); + set_reg(vm, vcpuid, KVM_ARM64_SYS_REG(SYS_TPIDR_EL1), vcpuid); } void vcpu_dump(FILE *stream, struct kvm_vm *vm, uint32_t vcpuid, uint8_t indent) @@ -426,3 +427,8 @@ void vm_install_exception_handler(struct kvm_vm *vm, int vector, assert(vector < VECTOR_NUM); handlers->exception_handlers[vector][0] = handler; } + +uint32_t guest_get_vcpuid(void) +{ + return read_sysreg(tpidr_el1); +} -- cgit From 414de89df1ec453ff4adb9d77ffd596096cb44bd Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:35 +0000 Subject: KVM: arm64: selftests: Add light-weight spinlock support Add a simpler version of spinlock support for ARM64 for the guests to use. The implementation is loosely based on the spinlock implementation in kvm-unit-tests. Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Oliver Upton Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-12-rananta@google.com --- tools/testing/selftests/kvm/Makefile | 2 +- .../selftests/kvm/include/aarch64/spinlock.h | 13 +++++++++++ tools/testing/selftests/kvm/lib/aarch64/spinlock.c | 27 ++++++++++++++++++++++ 3 files changed, 41 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/kvm/include/aarch64/spinlock.h create mode 100644 tools/testing/selftests/kvm/lib/aarch64/spinlock.c diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index d1774f461393..d8fb91a5ea7b 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -35,7 +35,7 @@ endif LIBKVM = lib/assert.c lib/elf.c lib/io.c lib/kvm_util.c lib/rbtree.c lib/sparsebit.c lib/test_util.c lib/guest_modes.c lib/perf_test_util.c LIBKVM_x86_64 = lib/x86_64/apic.c lib/x86_64/processor.c lib/x86_64/vmx.c lib/x86_64/svm.c lib/x86_64/ucall.c lib/x86_64/handlers.S -LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S +LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S lib/aarch64/spinlock.c LIBKVM_s390x = lib/s390x/processor.c lib/s390x/ucall.c lib/s390x/diag318_test_handler.c TEST_GEN_PROGS_x86_64 = x86_64/cr4_cpuid_sync_test diff --git a/tools/testing/selftests/kvm/include/aarch64/spinlock.h b/tools/testing/selftests/kvm/include/aarch64/spinlock.h new file mode 100644 index 000000000000..cf0984106d14 --- /dev/null +++ b/tools/testing/selftests/kvm/include/aarch64/spinlock.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef SELFTEST_KVM_ARM64_SPINLOCK_H +#define SELFTEST_KVM_ARM64_SPINLOCK_H + +struct spinlock { + int v; +}; + +extern void spin_lock(struct spinlock *lock); +extern void spin_unlock(struct spinlock *lock); + +#endif /* SELFTEST_KVM_ARM64_SPINLOCK_H */ diff --git a/tools/testing/selftests/kvm/lib/aarch64/spinlock.c b/tools/testing/selftests/kvm/lib/aarch64/spinlock.c new file mode 100644 index 000000000000..a076e780be5d --- /dev/null +++ b/tools/testing/selftests/kvm/lib/aarch64/spinlock.c @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM64 Spinlock support + */ +#include + +#include "spinlock.h" + +void spin_lock(struct spinlock *lock) +{ + int val, res; + + asm volatile( + "1: ldaxr %w0, [%2]\n" + " cbnz %w0, 1b\n" + " mov %w0, #1\n" + " stxr %w1, %w0, [%2]\n" + " cbnz %w1, 1b\n" + : "=&r" (val), "=&r" (res) + : "r" (&lock->v) + : "memory"); +} + +void spin_unlock(struct spinlock *lock) +{ + asm volatile("stlr wzr, [%0]\n" : : "r" (&lock->v) : "memory"); +} -- cgit From 28281652f90acc138f8b4bae8a3bf8cf1ce0d29e Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:36 +0000 Subject: KVM: arm64: selftests: Add basic GICv3 support Add basic support for ARM Generic Interrupt Controller v3. The support provides guests to setup interrupts. The work is inspired from kvm-unit-tests and the kernel's GIC driver (drivers/irqchip/irq-gic-v3.c). Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Andrew Jones Reviewed-by: Ricardo Koller Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-13-rananta@google.com --- tools/testing/selftests/kvm/Makefile | 2 +- tools/testing/selftests/kvm/include/aarch64/gic.h | 21 ++ tools/testing/selftests/kvm/lib/aarch64/gic.c | 95 ++++++++ .../selftests/kvm/lib/aarch64/gic_private.h | 21 ++ tools/testing/selftests/kvm/lib/aarch64/gic_v3.c | 240 +++++++++++++++++++++ tools/testing/selftests/kvm/lib/aarch64/gic_v3.h | 70 ++++++ 6 files changed, 448 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/kvm/include/aarch64/gic.h create mode 100644 tools/testing/selftests/kvm/lib/aarch64/gic.c create mode 100644 tools/testing/selftests/kvm/lib/aarch64/gic_private.h create mode 100644 tools/testing/selftests/kvm/lib/aarch64/gic_v3.c create mode 100644 tools/testing/selftests/kvm/lib/aarch64/gic_v3.h diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index d8fb91a5ea7b..b8441dc33b78 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -35,7 +35,7 @@ endif LIBKVM = lib/assert.c lib/elf.c lib/io.c lib/kvm_util.c lib/rbtree.c lib/sparsebit.c lib/test_util.c lib/guest_modes.c lib/perf_test_util.c LIBKVM_x86_64 = lib/x86_64/apic.c lib/x86_64/processor.c lib/x86_64/vmx.c lib/x86_64/svm.c lib/x86_64/ucall.c lib/x86_64/handlers.S -LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S lib/aarch64/spinlock.c +LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S lib/aarch64/spinlock.c lib/aarch64/gic.c lib/aarch64/gic_v3.c LIBKVM_s390x = lib/s390x/processor.c lib/s390x/ucall.c lib/s390x/diag318_test_handler.c TEST_GEN_PROGS_x86_64 = x86_64/cr4_cpuid_sync_test diff --git a/tools/testing/selftests/kvm/include/aarch64/gic.h b/tools/testing/selftests/kvm/include/aarch64/gic.h new file mode 100644 index 000000000000..85dd1e53048e --- /dev/null +++ b/tools/testing/selftests/kvm/include/aarch64/gic.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ARM Generic Interrupt Controller (GIC) specific defines + */ + +#ifndef SELFTEST_KVM_GIC_H +#define SELFTEST_KVM_GIC_H + +enum gic_type { + GIC_V3, + GIC_TYPE_MAX, +}; + +void gic_init(enum gic_type type, unsigned int nr_cpus, + void *dist_base, void *redist_base); +void gic_irq_enable(unsigned int intid); +void gic_irq_disable(unsigned int intid); +unsigned int gic_get_and_ack_irq(void); +void gic_set_eoi(unsigned int intid); + +#endif /* SELFTEST_KVM_GIC_H */ diff --git a/tools/testing/selftests/kvm/lib/aarch64/gic.c b/tools/testing/selftests/kvm/lib/aarch64/gic.c new file mode 100644 index 000000000000..fff4fc27504d --- /dev/null +++ b/tools/testing/selftests/kvm/lib/aarch64/gic.c @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM Generic Interrupt Controller (GIC) support + */ + +#include +#include +#include + +#include "kvm_util.h" + +#include +#include "gic_private.h" +#include "processor.h" +#include "spinlock.h" + +static const struct gic_common_ops *gic_common_ops; +static struct spinlock gic_lock; + +static void gic_cpu_init(unsigned int cpu, void *redist_base) +{ + gic_common_ops->gic_cpu_init(cpu, redist_base); +} + +static void +gic_dist_init(enum gic_type type, unsigned int nr_cpus, void *dist_base) +{ + const struct gic_common_ops *gic_ops = NULL; + + spin_lock(&gic_lock); + + /* Distributor initialization is needed only once per VM */ + if (gic_common_ops) { + spin_unlock(&gic_lock); + return; + } + + if (type == GIC_V3) + gic_ops = &gicv3_ops; + + GUEST_ASSERT(gic_ops); + + gic_ops->gic_init(nr_cpus, dist_base); + gic_common_ops = gic_ops; + + /* Make sure that the initialized data is visible to all the vCPUs */ + dsb(sy); + + spin_unlock(&gic_lock); +} + +void gic_init(enum gic_type type, unsigned int nr_cpus, + void *dist_base, void *redist_base) +{ + uint32_t cpu = guest_get_vcpuid(); + + GUEST_ASSERT(type < GIC_TYPE_MAX); + GUEST_ASSERT(dist_base); + GUEST_ASSERT(redist_base); + GUEST_ASSERT(nr_cpus); + + gic_dist_init(type, nr_cpus, dist_base); + gic_cpu_init(cpu, redist_base); +} + +void gic_irq_enable(unsigned int intid) +{ + GUEST_ASSERT(gic_common_ops); + gic_common_ops->gic_irq_enable(intid); +} + +void gic_irq_disable(unsigned int intid) +{ + GUEST_ASSERT(gic_common_ops); + gic_common_ops->gic_irq_disable(intid); +} + +unsigned int gic_get_and_ack_irq(void) +{ + uint64_t irqstat; + unsigned int intid; + + GUEST_ASSERT(gic_common_ops); + + irqstat = gic_common_ops->gic_read_iar(); + intid = irqstat & GENMASK(23, 0); + + return intid; +} + +void gic_set_eoi(unsigned int intid) +{ + GUEST_ASSERT(gic_common_ops); + gic_common_ops->gic_write_eoir(intid); +} diff --git a/tools/testing/selftests/kvm/lib/aarch64/gic_private.h b/tools/testing/selftests/kvm/lib/aarch64/gic_private.h new file mode 100644 index 000000000000..d81d739433dc --- /dev/null +++ b/tools/testing/selftests/kvm/lib/aarch64/gic_private.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ARM Generic Interrupt Controller (GIC) private defines that's only + * shared among the GIC library code. + */ + +#ifndef SELFTEST_KVM_GIC_PRIVATE_H +#define SELFTEST_KVM_GIC_PRIVATE_H + +struct gic_common_ops { + void (*gic_init)(unsigned int nr_cpus, void *dist_base); + void (*gic_cpu_init)(unsigned int cpu, void *redist_base); + void (*gic_irq_enable)(unsigned int intid); + void (*gic_irq_disable)(unsigned int intid); + uint64_t (*gic_read_iar)(void); + void (*gic_write_eoir)(uint32_t irq); +}; + +extern const struct gic_common_ops gicv3_ops; + +#endif /* SELFTEST_KVM_GIC_PRIVATE_H */ diff --git a/tools/testing/selftests/kvm/lib/aarch64/gic_v3.c b/tools/testing/selftests/kvm/lib/aarch64/gic_v3.c new file mode 100644 index 000000000000..2dbf3339b62e --- /dev/null +++ b/tools/testing/selftests/kvm/lib/aarch64/gic_v3.c @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM Generic Interrupt Controller (GIC) v3 support + */ + +#include + +#include "kvm_util.h" +#include "processor.h" +#include "delay.h" + +#include "gic_v3.h" +#include "gic_private.h" + +struct gicv3_data { + void *dist_base; + void *redist_base[GICV3_MAX_CPUS]; + unsigned int nr_cpus; + unsigned int nr_spis; +}; + +#define sgi_base_from_redist(redist_base) (redist_base + SZ_64K) + +enum gicv3_intid_range { + SGI_RANGE, + PPI_RANGE, + SPI_RANGE, + INVALID_RANGE, +}; + +static struct gicv3_data gicv3_data; + +static void gicv3_gicd_wait_for_rwp(void) +{ + unsigned int count = 100000; /* 1s */ + + while (readl(gicv3_data.dist_base + GICD_CTLR) & GICD_CTLR_RWP) { + GUEST_ASSERT(count--); + udelay(10); + } +} + +static void gicv3_gicr_wait_for_rwp(void *redist_base) +{ + unsigned int count = 100000; /* 1s */ + + while (readl(redist_base + GICR_CTLR) & GICR_CTLR_RWP) { + GUEST_ASSERT(count--); + udelay(10); + } +} + +static enum gicv3_intid_range get_intid_range(unsigned int intid) +{ + switch (intid) { + case 0 ... 15: + return SGI_RANGE; + case 16 ... 31: + return PPI_RANGE; + case 32 ... 1019: + return SPI_RANGE; + } + + /* We should not be reaching here */ + GUEST_ASSERT(0); + + return INVALID_RANGE; +} + +static uint64_t gicv3_read_iar(void) +{ + uint64_t irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1); + + dsb(sy); + return irqstat; +} + +static void gicv3_write_eoir(uint32_t irq) +{ + write_sysreg_s(irq, SYS_ICC_EOIR1_EL1); + isb(); +} + +static void +gicv3_config_irq(unsigned int intid, unsigned int offset) +{ + uint32_t cpu = guest_get_vcpuid(); + uint32_t mask = 1 << (intid % 32); + enum gicv3_intid_range intid_range = get_intid_range(intid); + void *reg; + + /* We care about 'cpu' only for SGIs or PPIs */ + if (intid_range == SGI_RANGE || intid_range == PPI_RANGE) { + GUEST_ASSERT(cpu < gicv3_data.nr_cpus); + + reg = sgi_base_from_redist(gicv3_data.redist_base[cpu]) + + offset; + writel(mask, reg); + gicv3_gicr_wait_for_rwp(gicv3_data.redist_base[cpu]); + } else if (intid_range == SPI_RANGE) { + reg = gicv3_data.dist_base + offset + (intid / 32) * 4; + writel(mask, reg); + gicv3_gicd_wait_for_rwp(); + } else { + GUEST_ASSERT(0); + } +} + +static void gicv3_irq_enable(unsigned int intid) +{ + gicv3_config_irq(intid, GICD_ISENABLER); +} + +static void gicv3_irq_disable(unsigned int intid) +{ + gicv3_config_irq(intid, GICD_ICENABLER); +} + +static void gicv3_enable_redist(void *redist_base) +{ + uint32_t val = readl(redist_base + GICR_WAKER); + unsigned int count = 100000; /* 1s */ + + val &= ~GICR_WAKER_ProcessorSleep; + writel(val, redist_base + GICR_WAKER); + + /* Wait until the processor is 'active' */ + while (readl(redist_base + GICR_WAKER) & GICR_WAKER_ChildrenAsleep) { + GUEST_ASSERT(count--); + udelay(10); + } +} + +static inline void *gicr_base_cpu(void *redist_base, uint32_t cpu) +{ + /* Align all the redistributors sequentially */ + return redist_base + cpu * SZ_64K * 2; +} + +static void gicv3_cpu_init(unsigned int cpu, void *redist_base) +{ + void *sgi_base; + unsigned int i; + void *redist_base_cpu; + + GUEST_ASSERT(cpu < gicv3_data.nr_cpus); + + redist_base_cpu = gicr_base_cpu(redist_base, cpu); + sgi_base = sgi_base_from_redist(redist_base_cpu); + + gicv3_enable_redist(redist_base_cpu); + + /* + * Mark all the SGI and PPI interrupts as non-secure Group-1. + * Also, deactivate and disable them. + */ + writel(~0, sgi_base + GICR_IGROUPR0); + writel(~0, sgi_base + GICR_ICACTIVER0); + writel(~0, sgi_base + GICR_ICENABLER0); + + /* Set a default priority for all the SGIs and PPIs */ + for (i = 0; i < 32; i += 4) + writel(GICD_INT_DEF_PRI_X4, + sgi_base + GICR_IPRIORITYR0 + i); + + gicv3_gicr_wait_for_rwp(redist_base_cpu); + + /* Enable the GIC system register (ICC_*) access */ + write_sysreg_s(read_sysreg_s(SYS_ICC_SRE_EL1) | ICC_SRE_EL1_SRE, + SYS_ICC_SRE_EL1); + + /* Set a default priority threshold */ + write_sysreg_s(ICC_PMR_DEF_PRIO, SYS_ICC_PMR_EL1); + + /* Enable non-secure Group-1 interrupts */ + write_sysreg_s(ICC_IGRPEN1_EL1_ENABLE, SYS_ICC_GRPEN1_EL1); + + gicv3_data.redist_base[cpu] = redist_base_cpu; +} + +static void gicv3_dist_init(void) +{ + void *dist_base = gicv3_data.dist_base; + unsigned int i; + + /* Disable the distributor until we set things up */ + writel(0, dist_base + GICD_CTLR); + gicv3_gicd_wait_for_rwp(); + + /* + * Mark all the SPI interrupts as non-secure Group-1. + * Also, deactivate and disable them. + */ + for (i = 32; i < gicv3_data.nr_spis; i += 32) { + writel(~0, dist_base + GICD_IGROUPR + i / 8); + writel(~0, dist_base + GICD_ICACTIVER + i / 8); + writel(~0, dist_base + GICD_ICENABLER + i / 8); + } + + /* Set a default priority for all the SPIs */ + for (i = 32; i < gicv3_data.nr_spis; i += 4) + writel(GICD_INT_DEF_PRI_X4, + dist_base + GICD_IPRIORITYR + i); + + /* Wait for the settings to sync-in */ + gicv3_gicd_wait_for_rwp(); + + /* Finally, enable the distributor globally with ARE */ + writel(GICD_CTLR_ARE_NS | GICD_CTLR_ENABLE_G1A | + GICD_CTLR_ENABLE_G1, dist_base + GICD_CTLR); + gicv3_gicd_wait_for_rwp(); +} + +static void gicv3_init(unsigned int nr_cpus, void *dist_base) +{ + GUEST_ASSERT(nr_cpus <= GICV3_MAX_CPUS); + + gicv3_data.nr_cpus = nr_cpus; + gicv3_data.dist_base = dist_base; + gicv3_data.nr_spis = GICD_TYPER_SPIS( + readl(gicv3_data.dist_base + GICD_TYPER)); + if (gicv3_data.nr_spis > 1020) + gicv3_data.nr_spis = 1020; + + /* + * Initialize only the distributor for now. + * The redistributor and CPU interfaces are initialized + * later for every PE. + */ + gicv3_dist_init(); +} + +const struct gic_common_ops gicv3_ops = { + .gic_init = gicv3_init, + .gic_cpu_init = gicv3_cpu_init, + .gic_irq_enable = gicv3_irq_enable, + .gic_irq_disable = gicv3_irq_disable, + .gic_read_iar = gicv3_read_iar, + .gic_write_eoir = gicv3_write_eoir, +}; diff --git a/tools/testing/selftests/kvm/lib/aarch64/gic_v3.h b/tools/testing/selftests/kvm/lib/aarch64/gic_v3.h new file mode 100644 index 000000000000..b51536d469a6 --- /dev/null +++ b/tools/testing/selftests/kvm/lib/aarch64/gic_v3.h @@ -0,0 +1,70 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ARM Generic Interrupt Controller (GIC) v3 specific defines + */ + +#ifndef SELFTEST_KVM_GICV3_H +#define SELFTEST_KVM_GICV3_H + +#include + +/* + * Distributor registers + */ +#define GICD_CTLR 0x0000 +#define GICD_TYPER 0x0004 +#define GICD_IGROUPR 0x0080 +#define GICD_ISENABLER 0x0100 +#define GICD_ICENABLER 0x0180 +#define GICD_ICACTIVER 0x0380 +#define GICD_IPRIORITYR 0x0400 + +/* + * The assumption is that the guest runs in a non-secure mode. + * The following bits of GICD_CTLR are defined accordingly. + */ +#define GICD_CTLR_RWP (1U << 31) +#define GICD_CTLR_nASSGIreq (1U << 8) +#define GICD_CTLR_ARE_NS (1U << 4) +#define GICD_CTLR_ENABLE_G1A (1U << 1) +#define GICD_CTLR_ENABLE_G1 (1U << 0) + +#define GICD_TYPER_SPIS(typer) ((((typer) & 0x1f) + 1) * 32) +#define GICD_INT_DEF_PRI_X4 0xa0a0a0a0 + +/* + * Redistributor registers + */ +#define GICR_CTLR 0x000 +#define GICR_WAKER 0x014 + +#define GICR_CTLR_RWP (1U << 3) + +#define GICR_WAKER_ProcessorSleep (1U << 1) +#define GICR_WAKER_ChildrenAsleep (1U << 2) + +/* + * Redistributor registers, offsets from SGI base + */ +#define GICR_IGROUPR0 GICD_IGROUPR +#define GICR_ISENABLER0 GICD_ISENABLER +#define GICR_ICENABLER0 GICD_ICENABLER +#define GICR_ICACTIVER0 GICD_ICACTIVER +#define GICR_IPRIORITYR0 GICD_IPRIORITYR + +/* CPU interface registers */ +#define SYS_ICC_PMR_EL1 sys_reg(3, 0, 4, 6, 0) +#define SYS_ICC_IAR1_EL1 sys_reg(3, 0, 12, 12, 0) +#define SYS_ICC_EOIR1_EL1 sys_reg(3, 0, 12, 12, 1) +#define SYS_ICC_SRE_EL1 sys_reg(3, 0, 12, 12, 5) +#define SYS_ICC_GRPEN1_EL1 sys_reg(3, 0, 12, 12, 7) + +#define ICC_PMR_DEF_PRIO 0xf0 + +#define ICC_SRE_EL1_SRE (1U << 0) + +#define ICC_IGRPEN1_EL1_ENABLE (1U << 0) + +#define GICV3_MAX_CPUS 512 + +#endif /* SELFTEST_KVM_GICV3_H */ -- cgit From 250b8d6cb3b0312341304fa323b82355d656c018 Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:37 +0000 Subject: KVM: arm64: selftests: Add host support for vGIC Implement a simple library to perform vGIC-v3 setup from a host point of view. This includes creating a vGIC device, setting up distributor and redistributor attributes, and mapping the guest physical addresses. The definition of REDIST_REGION_ATTR_ADDR is taken from aarch64/vgic_init test. Hence, replace the definition by including vgic.h in the test file. Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Ricardo Koller Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-14-rananta@google.com --- tools/testing/selftests/kvm/Makefile | 2 +- tools/testing/selftests/kvm/aarch64/vgic_init.c | 3 +- tools/testing/selftests/kvm/include/aarch64/vgic.h | 20 +++++++ tools/testing/selftests/kvm/lib/aarch64/vgic.c | 70 ++++++++++++++++++++++ 4 files changed, 92 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/aarch64/vgic.h create mode 100644 tools/testing/selftests/kvm/lib/aarch64/vgic.c diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index b8441dc33b78..cb5bdd4f0694 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -35,7 +35,7 @@ endif LIBKVM = lib/assert.c lib/elf.c lib/io.c lib/kvm_util.c lib/rbtree.c lib/sparsebit.c lib/test_util.c lib/guest_modes.c lib/perf_test_util.c LIBKVM_x86_64 = lib/x86_64/apic.c lib/x86_64/processor.c lib/x86_64/vmx.c lib/x86_64/svm.c lib/x86_64/ucall.c lib/x86_64/handlers.S -LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S lib/aarch64/spinlock.c lib/aarch64/gic.c lib/aarch64/gic_v3.c +LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S lib/aarch64/spinlock.c lib/aarch64/gic.c lib/aarch64/gic_v3.c lib/aarch64/vgic.c LIBKVM_s390x = lib/s390x/processor.c lib/s390x/ucall.c lib/s390x/diag318_test_handler.c TEST_GEN_PROGS_x86_64 = x86_64/cr4_cpuid_sync_test diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c index 623f31a14326..157fc24f39c5 100644 --- a/tools/testing/selftests/kvm/aarch64/vgic_init.c +++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c @@ -13,11 +13,10 @@ #include "test_util.h" #include "kvm_util.h" #include "processor.h" +#include "vgic.h" #define NR_VCPUS 4 -#define REDIST_REGION_ATTR_ADDR(count, base, flags, index) (((uint64_t)(count) << 52) | \ - ((uint64_t)((base) >> 16) << 16) | ((uint64_t)(flags) << 12) | index) #define REG_OFFSET(vcpu, offset) (((uint64_t)vcpu << 32) | offset) #define GICR_TYPER 0x8 diff --git a/tools/testing/selftests/kvm/include/aarch64/vgic.h b/tools/testing/selftests/kvm/include/aarch64/vgic.h new file mode 100644 index 000000000000..0ecfb253893c --- /dev/null +++ b/tools/testing/selftests/kvm/include/aarch64/vgic.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ARM Generic Interrupt Controller (GIC) host specific defines + */ + +#ifndef SELFTEST_KVM_VGIC_H +#define SELFTEST_KVM_VGIC_H + +#include + +#define REDIST_REGION_ATTR_ADDR(count, base, flags, index) \ + (((uint64_t)(count) << 52) | \ + ((uint64_t)((base) >> 16) << 16) | \ + ((uint64_t)(flags) << 12) | \ + index) + +int vgic_v3_setup(struct kvm_vm *vm, unsigned int nr_vcpus, + uint64_t gicd_base_gpa, uint64_t gicr_base_gpa); + +#endif /* SELFTEST_KVM_VGIC_H */ diff --git a/tools/testing/selftests/kvm/lib/aarch64/vgic.c b/tools/testing/selftests/kvm/lib/aarch64/vgic.c new file mode 100644 index 000000000000..b9b271ff520d --- /dev/null +++ b/tools/testing/selftests/kvm/lib/aarch64/vgic.c @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM Generic Interrupt Controller (GIC) v3 host support + */ + +#include +#include +#include + +#include "kvm_util.h" +#include "../kvm_util_internal.h" +#include "vgic.h" + +/* + * vGIC-v3 default host setup + * + * Input args: + * vm - KVM VM + * nr_vcpus - Number of vCPUs supported by this VM + * gicd_base_gpa - Guest Physical Address of the Distributor region + * gicr_base_gpa - Guest Physical Address of the Redistributor region + * + * Output args: None + * + * Return: GIC file-descriptor or negative error code upon failure + * + * The function creates a vGIC-v3 device and maps the distributor and + * redistributor regions of the guest. Since it depends on the number of + * vCPUs for the VM, it must be called after all the vCPUs have been created. + */ +int vgic_v3_setup(struct kvm_vm *vm, unsigned int nr_vcpus, + uint64_t gicd_base_gpa, uint64_t gicr_base_gpa) +{ + int gic_fd; + uint64_t redist_attr; + struct list_head *iter; + unsigned int nr_gic_pages, nr_vcpus_created = 0; + + TEST_ASSERT(nr_vcpus, "Number of vCPUs cannot be empty\n"); + + /* + * Make sure that the caller is infact calling this + * function after all the vCPUs are added. + */ + list_for_each(iter, &vm->vcpus) + nr_vcpus_created++; + TEST_ASSERT(nr_vcpus == nr_vcpus_created, + "Number of vCPUs requested (%u) doesn't match with the ones created for the VM (%u)\n", + nr_vcpus, nr_vcpus_created); + + /* Distributor setup */ + gic_fd = kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); + kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_V3_ADDR_TYPE_DIST, &gicd_base_gpa, true); + nr_gic_pages = vm_calc_num_guest_pages(vm->mode, KVM_VGIC_V3_DIST_SIZE); + virt_map(vm, gicd_base_gpa, gicd_base_gpa, nr_gic_pages); + + /* Redistributor setup */ + redist_attr = REDIST_REGION_ATTR_ADDR(nr_vcpus, gicr_base_gpa, 0, 0); + kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &redist_attr, true); + nr_gic_pages = vm_calc_num_guest_pages(vm->mode, + KVM_VGIC_V3_REDIST_SIZE * nr_vcpus); + virt_map(vm, gicr_base_gpa, gicr_base_gpa, nr_gic_pages); + + kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, + KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true); + + return gic_fd; +} -- cgit From 4959d8650e9f4095a5df6e578377d850f1b94d2f Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:38 +0000 Subject: KVM: arm64: selftests: Add arch_timer test Add a KVM selftest to validate the arch_timer functionality. Primarily, the test sets up periodic timer interrupts and validates the basic architectural expectations upon its receipt. The test provides command-line options to configure the period of the timer, number of iterations, and number of vCPUs. Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-15-rananta@google.com --- tools/testing/selftests/kvm/.gitignore | 1 + tools/testing/selftests/kvm/Makefile | 1 + tools/testing/selftests/kvm/aarch64/arch_timer.c | 366 +++++++++++++++++++++++ 3 files changed, 368 insertions(+) create mode 100644 tools/testing/selftests/kvm/aarch64/arch_timer.c diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore index b8dbabe24ac2..02444fc69bae 100644 --- a/tools/testing/selftests/kvm/.gitignore +++ b/tools/testing/selftests/kvm/.gitignore @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only +/aarch64/arch_timer /aarch64/debug-exceptions /aarch64/get-reg-list /aarch64/psci_cpu_on_test diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index cb5bdd4f0694..79947dde0b66 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -86,6 +86,7 @@ TEST_GEN_PROGS_x86_64 += set_memory_region_test TEST_GEN_PROGS_x86_64 += steal_time TEST_GEN_PROGS_x86_64 += kvm_binary_stats_test +TEST_GEN_PROGS_aarch64 += aarch64/arch_timer TEST_GEN_PROGS_aarch64 += aarch64/debug-exceptions TEST_GEN_PROGS_aarch64 += aarch64/get-reg-list TEST_GEN_PROGS_aarch64 += aarch64/psci_cpu_on_test diff --git a/tools/testing/selftests/kvm/aarch64/arch_timer.c b/tools/testing/selftests/kvm/aarch64/arch_timer.c new file mode 100644 index 000000000000..3b6ea6a462f4 --- /dev/null +++ b/tools/testing/selftests/kvm/aarch64/arch_timer.c @@ -0,0 +1,366 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * arch_timer.c - Tests the aarch64 timer IRQ functionality + * + * The test validates both the virtual and physical timer IRQs using + * CVAL and TVAL registers. This consitutes the four stages in the test. + * The guest's main thread configures the timer interrupt for a stage + * and waits for it to fire, with a timeout equal to the timer period. + * It asserts that the timeout doesn't exceed the timer period. + * + * On the other hand, upon receipt of an interrupt, the guest's interrupt + * handler validates the interrupt by checking if the architectural state + * is in compliance with the specifications. + * + * The test provides command-line options to configure the timer's + * period (-p), number of vCPUs (-n), and iterations per stage (-i). + * + * Copyright (c) 2021, Google LLC. + */ + +#define _GNU_SOURCE + +#include +#include +#include +#include + +#include "kvm_util.h" +#include "processor.h" +#include "delay.h" +#include "arch_timer.h" +#include "gic.h" +#include "vgic.h" + +#define NR_VCPUS_DEF 4 +#define NR_TEST_ITERS_DEF 5 +#define TIMER_TEST_PERIOD_MS_DEF 10 +#define TIMER_TEST_ERR_MARGIN_US 100 + +struct test_args { + int nr_vcpus; + int nr_iter; + int timer_period_ms; +}; + +static struct test_args test_args = { + .nr_vcpus = NR_VCPUS_DEF, + .nr_iter = NR_TEST_ITERS_DEF, + .timer_period_ms = TIMER_TEST_PERIOD_MS_DEF, +}; + +#define msecs_to_usecs(msec) ((msec) * 1000LL) + +#define GICD_BASE_GPA 0x8000000ULL +#define GICR_BASE_GPA 0x80A0000ULL + +enum guest_stage { + GUEST_STAGE_VTIMER_CVAL = 1, + GUEST_STAGE_VTIMER_TVAL, + GUEST_STAGE_PTIMER_CVAL, + GUEST_STAGE_PTIMER_TVAL, + GUEST_STAGE_MAX, +}; + +/* Shared variables between host and guest */ +struct test_vcpu_shared_data { + int nr_iter; + enum guest_stage guest_stage; + uint64_t xcnt; +}; + +struct test_vcpu { + uint32_t vcpuid; + pthread_t pt_vcpu_run; + struct kvm_vm *vm; +}; + +static struct test_vcpu test_vcpu[KVM_MAX_VCPUS]; +static struct test_vcpu_shared_data vcpu_shared_data[KVM_MAX_VCPUS]; + +static int vtimer_irq, ptimer_irq; + +static void +guest_configure_timer_action(struct test_vcpu_shared_data *shared_data) +{ + switch (shared_data->guest_stage) { + case GUEST_STAGE_VTIMER_CVAL: + timer_set_next_cval_ms(VIRTUAL, test_args.timer_period_ms); + shared_data->xcnt = timer_get_cntct(VIRTUAL); + timer_set_ctl(VIRTUAL, CTL_ENABLE); + break; + case GUEST_STAGE_VTIMER_TVAL: + timer_set_next_tval_ms(VIRTUAL, test_args.timer_period_ms); + shared_data->xcnt = timer_get_cntct(VIRTUAL); + timer_set_ctl(VIRTUAL, CTL_ENABLE); + break; + case GUEST_STAGE_PTIMER_CVAL: + timer_set_next_cval_ms(PHYSICAL, test_args.timer_period_ms); + shared_data->xcnt = timer_get_cntct(PHYSICAL); + timer_set_ctl(PHYSICAL, CTL_ENABLE); + break; + case GUEST_STAGE_PTIMER_TVAL: + timer_set_next_tval_ms(PHYSICAL, test_args.timer_period_ms); + shared_data->xcnt = timer_get_cntct(PHYSICAL); + timer_set_ctl(PHYSICAL, CTL_ENABLE); + break; + default: + GUEST_ASSERT(0); + } +} + +static void guest_validate_irq(unsigned int intid, + struct test_vcpu_shared_data *shared_data) +{ + enum guest_stage stage = shared_data->guest_stage; + uint64_t xcnt = 0, xcnt_diff_us, cval = 0; + unsigned long xctl = 0; + unsigned int timer_irq = 0; + + if (stage == GUEST_STAGE_VTIMER_CVAL || + stage == GUEST_STAGE_VTIMER_TVAL) { + xctl = timer_get_ctl(VIRTUAL); + timer_set_ctl(VIRTUAL, CTL_IMASK); + xcnt = timer_get_cntct(VIRTUAL); + cval = timer_get_cval(VIRTUAL); + timer_irq = vtimer_irq; + } else if (stage == GUEST_STAGE_PTIMER_CVAL || + stage == GUEST_STAGE_PTIMER_TVAL) { + xctl = timer_get_ctl(PHYSICAL); + timer_set_ctl(PHYSICAL, CTL_IMASK); + xcnt = timer_get_cntct(PHYSICAL); + cval = timer_get_cval(PHYSICAL); + timer_irq = ptimer_irq; + } else { + GUEST_ASSERT(0); + } + + xcnt_diff_us = cycles_to_usec(xcnt - shared_data->xcnt); + + /* Make sure we are dealing with the correct timer IRQ */ + GUEST_ASSERT_2(intid == timer_irq, intid, timer_irq); + + /* Basic 'timer condition met' check */ + GUEST_ASSERT_3(xcnt >= cval, xcnt, cval, xcnt_diff_us); + GUEST_ASSERT_1(xctl & CTL_ISTATUS, xctl); +} + +static void guest_irq_handler(struct ex_regs *regs) +{ + unsigned int intid = gic_get_and_ack_irq(); + uint32_t cpu = guest_get_vcpuid(); + struct test_vcpu_shared_data *shared_data = &vcpu_shared_data[cpu]; + + guest_validate_irq(intid, shared_data); + + WRITE_ONCE(shared_data->nr_iter, shared_data->nr_iter + 1); + + gic_set_eoi(intid); +} + +static void guest_run_stage(struct test_vcpu_shared_data *shared_data, + enum guest_stage stage) +{ + uint32_t irq_iter, config_iter; + + shared_data->guest_stage = stage; + shared_data->nr_iter = 0; + + for (config_iter = 0; config_iter < test_args.nr_iter; config_iter++) { + /* Setup the next interrupt */ + guest_configure_timer_action(shared_data); + + /* Setup a timeout for the interrupt to arrive */ + udelay(msecs_to_usecs(test_args.timer_period_ms) + + TIMER_TEST_ERR_MARGIN_US); + + irq_iter = READ_ONCE(shared_data->nr_iter); + GUEST_ASSERT_2(config_iter + 1 == irq_iter, + config_iter + 1, irq_iter); + } +} + +static void guest_code(void) +{ + uint32_t cpu = guest_get_vcpuid(); + struct test_vcpu_shared_data *shared_data = &vcpu_shared_data[cpu]; + + local_irq_disable(); + + gic_init(GIC_V3, test_args.nr_vcpus, + (void *)GICD_BASE_GPA, (void *)GICR_BASE_GPA); + + timer_set_ctl(VIRTUAL, CTL_IMASK); + timer_set_ctl(PHYSICAL, CTL_IMASK); + + gic_irq_enable(vtimer_irq); + gic_irq_enable(ptimer_irq); + local_irq_enable(); + + guest_run_stage(shared_data, GUEST_STAGE_VTIMER_CVAL); + guest_run_stage(shared_data, GUEST_STAGE_VTIMER_TVAL); + guest_run_stage(shared_data, GUEST_STAGE_PTIMER_CVAL); + guest_run_stage(shared_data, GUEST_STAGE_PTIMER_TVAL); + + GUEST_DONE(); +} + +static void *test_vcpu_run(void *arg) +{ + struct ucall uc; + struct test_vcpu *vcpu = arg; + struct kvm_vm *vm = vcpu->vm; + uint32_t vcpuid = vcpu->vcpuid; + struct test_vcpu_shared_data *shared_data = &vcpu_shared_data[vcpuid]; + + vcpu_run(vm, vcpuid); + + switch (get_ucall(vm, vcpuid, &uc)) { + case UCALL_SYNC: + case UCALL_DONE: + break; + case UCALL_ABORT: + sync_global_from_guest(vm, *shared_data); + TEST_FAIL("%s at %s:%ld\n\tvalues: %lu, %lu; %lu, vcpu: %u; stage: %u; iter: %u", + (const char *)uc.args[0], __FILE__, uc.args[1], + uc.args[2], uc.args[3], uc.args[4], vcpuid, + shared_data->guest_stage, shared_data->nr_iter); + break; + default: + TEST_FAIL("Unexpected guest exit\n"); + } + + return NULL; +} + +static void test_run(struct kvm_vm *vm) +{ + int i, ret; + + for (i = 0; i < test_args.nr_vcpus; i++) { + ret = pthread_create(&test_vcpu[i].pt_vcpu_run, NULL, + test_vcpu_run, &test_vcpu[i]); + TEST_ASSERT(!ret, "Failed to create vCPU-%d pthread\n", i); + } + + for (i = 0; i < test_args.nr_vcpus; i++) + pthread_join(test_vcpu[i].pt_vcpu_run, NULL); +} + +static void test_init_timer_irq(struct kvm_vm *vm) +{ + /* Timer initid should be same for all the vCPUs, so query only vCPU-0 */ + int vcpu0_fd = vcpu_get_fd(vm, 0); + + kvm_device_access(vcpu0_fd, KVM_ARM_VCPU_TIMER_CTRL, + KVM_ARM_VCPU_TIMER_IRQ_PTIMER, &ptimer_irq, false); + kvm_device_access(vcpu0_fd, KVM_ARM_VCPU_TIMER_CTRL, + KVM_ARM_VCPU_TIMER_IRQ_VTIMER, &vtimer_irq, false); + + sync_global_to_guest(vm, ptimer_irq); + sync_global_to_guest(vm, vtimer_irq); + + pr_debug("ptimer_irq: %d; vtimer_irq: %d\n", ptimer_irq, vtimer_irq); +} + +static struct kvm_vm *test_vm_create(void) +{ + struct kvm_vm *vm; + unsigned int i; + int nr_vcpus = test_args.nr_vcpus; + + vm = vm_create_default_with_vcpus(nr_vcpus, 0, 0, guest_code, NULL); + + vm_init_descriptor_tables(vm); + vm_install_exception_handler(vm, VECTOR_IRQ_CURRENT, guest_irq_handler); + + for (i = 0; i < nr_vcpus; i++) { + vcpu_init_descriptor_tables(vm, i); + + test_vcpu[i].vcpuid = i; + test_vcpu[i].vm = vm; + } + + ucall_init(vm, NULL); + test_init_timer_irq(vm); + vgic_v3_setup(vm, nr_vcpus, GICD_BASE_GPA, GICR_BASE_GPA); + + /* Make all the test's cmdline args visible to the guest */ + sync_global_to_guest(vm, test_args); + + return vm; +} + +static void test_print_help(char *name) +{ + pr_info("Usage: %s [-h] [-n nr_vcpus] [-i iterations] [-p timer_period_ms]\n", + name); + pr_info("\t-n: Number of vCPUs to configure (default: %u; max: %u)\n", + NR_VCPUS_DEF, KVM_MAX_VCPUS); + pr_info("\t-i: Number of iterations per stage (default: %u)\n", + NR_TEST_ITERS_DEF); + pr_info("\t-p: Periodicity (in ms) of the guest timer (default: %u)\n", + TIMER_TEST_PERIOD_MS_DEF); + pr_info("\t-h: print this help screen\n"); +} + +static bool parse_args(int argc, char *argv[]) +{ + int opt; + + while ((opt = getopt(argc, argv, "hn:i:p:")) != -1) { + switch (opt) { + case 'n': + test_args.nr_vcpus = atoi(optarg); + if (test_args.nr_vcpus <= 0) { + pr_info("Positive value needed for -n\n"); + goto err; + } else if (test_args.nr_vcpus > KVM_MAX_VCPUS) { + pr_info("Max allowed vCPUs: %u\n", + KVM_MAX_VCPUS); + goto err; + } + break; + case 'i': + test_args.nr_iter = atoi(optarg); + if (test_args.nr_iter <= 0) { + pr_info("Positive value needed for -i\n"); + goto err; + } + break; + case 'p': + test_args.timer_period_ms = atoi(optarg); + if (test_args.timer_period_ms <= 0) { + pr_info("Positive value needed for -p\n"); + goto err; + } + break; + case 'h': + default: + goto err; + } + } + + return true; + +err: + test_print_help(argv[0]); + return false; +} + +int main(int argc, char *argv[]) +{ + struct kvm_vm *vm; + + /* Tell stdout not to buffer its content */ + setbuf(stdout, NULL); + + if (!parse_args(argc, argv)) + exit(KSFT_SKIP); + + vm = test_vm_create(); + test_run(vm); + kvm_vm_free(vm); + + return 0; +} -- cgit From 61f6fadbf9bd6694c72e40d9fa186ceff730ef33 Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta Date: Thu, 7 Oct 2021 23:34:39 +0000 Subject: KVM: arm64: selftests: arch_timer: Support vCPU migration Since the timer stack (hardware and KVM) is per-CPU, there are potential chances for races to occur when the scheduler decides to migrate a vCPU thread to a different physical CPU. Hence, include an option to stress-test this part as well by forcing the vCPUs to migrate across physical CPUs in the system at a particular rate. Originally, the bug for the fix with commit 3134cc8beb69d0d ("KVM: arm64: vgic: Resample HW pending state on deactivation") was discovered using arch_timer test with vCPU migrations and can be easily reproduced. Signed-off-by: Raghavendra Rao Ananta Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211007233439.1826892-16-rananta@google.com --- tools/testing/selftests/kvm/aarch64/arch_timer.c | 115 ++++++++++++++++++++++- 1 file changed, 114 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/aarch64/arch_timer.c b/tools/testing/selftests/kvm/aarch64/arch_timer.c index 3b6ea6a462f4..bf6a45b0b8dc 100644 --- a/tools/testing/selftests/kvm/aarch64/arch_timer.c +++ b/tools/testing/selftests/kvm/aarch64/arch_timer.c @@ -14,6 +14,8 @@ * * The test provides command-line options to configure the timer's * period (-p), number of vCPUs (-n), and iterations per stage (-i). + * To stress-test the timer stack even more, an option to migrate the + * vCPUs across pCPUs (-m), at a particular rate, is also provided. * * Copyright (c) 2021, Google LLC. */ @@ -24,6 +26,8 @@ #include #include #include +#include +#include #include "kvm_util.h" #include "processor.h" @@ -36,17 +40,20 @@ #define NR_TEST_ITERS_DEF 5 #define TIMER_TEST_PERIOD_MS_DEF 10 #define TIMER_TEST_ERR_MARGIN_US 100 +#define TIMER_TEST_MIGRATION_FREQ_MS 2 struct test_args { int nr_vcpus; int nr_iter; int timer_period_ms; + int migration_freq_ms; }; static struct test_args test_args = { .nr_vcpus = NR_VCPUS_DEF, .nr_iter = NR_TEST_ITERS_DEF, .timer_period_ms = TIMER_TEST_PERIOD_MS_DEF, + .migration_freq_ms = TIMER_TEST_MIGRATION_FREQ_MS, }; #define msecs_to_usecs(msec) ((msec) * 1000LL) @@ -80,6 +87,9 @@ static struct test_vcpu_shared_data vcpu_shared_data[KVM_MAX_VCPUS]; static int vtimer_irq, ptimer_irq; +static unsigned long *vcpu_done_map; +static pthread_mutex_t vcpu_done_map_lock; + static void guest_configure_timer_action(struct test_vcpu_shared_data *shared_data) { @@ -215,6 +225,11 @@ static void *test_vcpu_run(void *arg) vcpu_run(vm, vcpuid); + /* Currently, any exit from guest is an indication of completion */ + pthread_mutex_lock(&vcpu_done_map_lock); + set_bit(vcpuid, vcpu_done_map); + pthread_mutex_unlock(&vcpu_done_map_lock); + switch (get_ucall(vm, vcpuid, &uc)) { case UCALL_SYNC: case UCALL_DONE: @@ -233,9 +248,78 @@ static void *test_vcpu_run(void *arg) return NULL; } +static uint32_t test_get_pcpu(void) +{ + uint32_t pcpu; + unsigned int nproc_conf; + cpu_set_t online_cpuset; + + nproc_conf = get_nprocs_conf(); + sched_getaffinity(0, sizeof(cpu_set_t), &online_cpuset); + + /* Randomly find an available pCPU to place a vCPU on */ + do { + pcpu = rand() % nproc_conf; + } while (!CPU_ISSET(pcpu, &online_cpuset)); + + return pcpu; +} + +static int test_migrate_vcpu(struct test_vcpu *vcpu) +{ + int ret; + cpu_set_t cpuset; + uint32_t new_pcpu = test_get_pcpu(); + + CPU_ZERO(&cpuset); + CPU_SET(new_pcpu, &cpuset); + + pr_debug("Migrating vCPU: %u to pCPU: %u\n", vcpu->vcpuid, new_pcpu); + + ret = pthread_setaffinity_np(vcpu->pt_vcpu_run, + sizeof(cpuset), &cpuset); + + /* Allow the error where the vCPU thread is already finished */ + TEST_ASSERT(ret == 0 || ret == ESRCH, + "Failed to migrate the vCPU:%u to pCPU: %u; ret: %d\n", + vcpu->vcpuid, new_pcpu, ret); + + return ret; +} + +static void *test_vcpu_migration(void *arg) +{ + unsigned int i, n_done; + bool vcpu_done; + + do { + usleep(msecs_to_usecs(test_args.migration_freq_ms)); + + for (n_done = 0, i = 0; i < test_args.nr_vcpus; i++) { + pthread_mutex_lock(&vcpu_done_map_lock); + vcpu_done = test_bit(i, vcpu_done_map); + pthread_mutex_unlock(&vcpu_done_map_lock); + + if (vcpu_done) { + n_done++; + continue; + } + + test_migrate_vcpu(&test_vcpu[i]); + } + } while (test_args.nr_vcpus != n_done); + + return NULL; +} + static void test_run(struct kvm_vm *vm) { int i, ret; + pthread_t pt_vcpu_migration; + + pthread_mutex_init(&vcpu_done_map_lock, NULL); + vcpu_done_map = bitmap_zalloc(test_args.nr_vcpus); + TEST_ASSERT(vcpu_done_map, "Failed to allocate vcpu done bitmap\n"); for (i = 0; i < test_args.nr_vcpus; i++) { ret = pthread_create(&test_vcpu[i].pt_vcpu_run, NULL, @@ -243,8 +327,23 @@ static void test_run(struct kvm_vm *vm) TEST_ASSERT(!ret, "Failed to create vCPU-%d pthread\n", i); } + /* Spawn a thread to control the vCPU migrations */ + if (test_args.migration_freq_ms) { + srand(time(NULL)); + + ret = pthread_create(&pt_vcpu_migration, NULL, + test_vcpu_migration, NULL); + TEST_ASSERT(!ret, "Failed to create the migration pthread\n"); + } + + for (i = 0; i < test_args.nr_vcpus; i++) pthread_join(test_vcpu[i].pt_vcpu_run, NULL); + + if (test_args.migration_freq_ms) + pthread_join(pt_vcpu_migration, NULL); + + bitmap_free(vcpu_done_map); } static void test_init_timer_irq(struct kvm_vm *vm) @@ -301,6 +400,8 @@ static void test_print_help(char *name) NR_TEST_ITERS_DEF); pr_info("\t-p: Periodicity (in ms) of the guest timer (default: %u)\n", TIMER_TEST_PERIOD_MS_DEF); + pr_info("\t-m: Frequency (in ms) of vCPUs to migrate to different pCPU. 0 to turn off (default: %u)\n", + TIMER_TEST_MIGRATION_FREQ_MS); pr_info("\t-h: print this help screen\n"); } @@ -308,7 +409,7 @@ static bool parse_args(int argc, char *argv[]) { int opt; - while ((opt = getopt(argc, argv, "hn:i:p:")) != -1) { + while ((opt = getopt(argc, argv, "hn:i:p:m:")) != -1) { switch (opt) { case 'n': test_args.nr_vcpus = atoi(optarg); @@ -335,6 +436,13 @@ static bool parse_args(int argc, char *argv[]) goto err; } break; + case 'm': + test_args.migration_freq_ms = atoi(optarg); + if (test_args.migration_freq_ms < 0) { + pr_info("0 or positive value needed for -m\n"); + goto err; + } + break; case 'h': default: goto err; @@ -358,6 +466,11 @@ int main(int argc, char *argv[]) if (!parse_args(argc, argv)) exit(KSFT_SKIP); + if (test_args.migration_freq_ms && get_nprocs() < 2) { + print_skip("At least two physical CPUs needed for vCPU migration"); + exit(KSFT_SKIP); + } + vm = test_vm_create(); test_run(vm); kvm_vm_free(vm); -- cgit From 3ef231670b9e9001316a426e794b2c74b8f6b4f6 Mon Sep 17 00:00:00 2001 From: Jia He Date: Tue, 7 Sep 2021 20:31:11 +0800 Subject: KVM: arm64: vgic: Add memcg accounting to vgic allocations Inspired by commit 254272ce6505 ("kvm: x86: Add memcg accounting to KVM allocations"), it would be better to make arm64 vgic consistent with common kvm codes. The memory allocations of VM scope should be charged into VM process cgroup, hence change GFP_KERNEL to GFP_KERNEL_ACCOUNT. There remain a few cases since these allocations are global, not in VM scope. Signed-off-by: Jia He Reviewed-by: Oliver Upton Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210907123112.10232-2-justin.he@arm.com --- arch/arm64/kvm/vgic/vgic-init.c | 2 +- arch/arm64/kvm/vgic/vgic-irqfd.c | 2 +- arch/arm64/kvm/vgic/vgic-its.c | 14 +++++++------- arch/arm64/kvm/vgic/vgic-mmio-v3.c | 2 +- arch/arm64/kvm/vgic/vgic-v4.c | 2 +- 5 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm64/kvm/vgic/vgic-init.c b/arch/arm64/kvm/vgic/vgic-init.c index 340c51d87677..0a06d0648970 100644 --- a/arch/arm64/kvm/vgic/vgic-init.c +++ b/arch/arm64/kvm/vgic/vgic-init.c @@ -134,7 +134,7 @@ static int kvm_vgic_dist_init(struct kvm *kvm, unsigned int nr_spis) struct kvm_vcpu *vcpu0 = kvm_get_vcpu(kvm, 0); int i; - dist->spis = kcalloc(nr_spis, sizeof(struct vgic_irq), GFP_KERNEL); + dist->spis = kcalloc(nr_spis, sizeof(struct vgic_irq), GFP_KERNEL_ACCOUNT); if (!dist->spis) return -ENOMEM; diff --git a/arch/arm64/kvm/vgic/vgic-irqfd.c b/arch/arm64/kvm/vgic/vgic-irqfd.c index 79f8899b234c..475059bacedf 100644 --- a/arch/arm64/kvm/vgic/vgic-irqfd.c +++ b/arch/arm64/kvm/vgic/vgic-irqfd.c @@ -139,7 +139,7 @@ int kvm_vgic_setup_default_irq_routing(struct kvm *kvm) u32 nr = dist->nr_spis; int i, ret; - entries = kcalloc(nr, sizeof(*entries), GFP_KERNEL); + entries = kcalloc(nr, sizeof(*entries), GFP_KERNEL_ACCOUNT); if (!entries) return -ENOMEM; diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c index 61728c543eb9..b99f47103056 100644 --- a/arch/arm64/kvm/vgic/vgic-its.c +++ b/arch/arm64/kvm/vgic/vgic-its.c @@ -48,7 +48,7 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid, if (irq) return irq; - irq = kzalloc(sizeof(struct vgic_irq), GFP_KERNEL); + irq = kzalloc(sizeof(struct vgic_irq), GFP_KERNEL_ACCOUNT); if (!irq) return ERR_PTR(-ENOMEM); @@ -332,7 +332,7 @@ int vgic_copy_lpi_list(struct kvm *kvm, struct kvm_vcpu *vcpu, u32 **intid_ptr) * we must be careful not to overrun the array. */ irq_count = READ_ONCE(dist->lpi_list_count); - intids = kmalloc_array(irq_count, sizeof(intids[0]), GFP_KERNEL); + intids = kmalloc_array(irq_count, sizeof(intids[0]), GFP_KERNEL_ACCOUNT); if (!intids) return -ENOMEM; @@ -985,7 +985,7 @@ static int vgic_its_alloc_collection(struct vgic_its *its, if (!vgic_its_check_id(its, its->baser_coll_table, coll_id, NULL)) return E_ITS_MAPC_COLLECTION_OOR; - collection = kzalloc(sizeof(*collection), GFP_KERNEL); + collection = kzalloc(sizeof(*collection), GFP_KERNEL_ACCOUNT); if (!collection) return -ENOMEM; @@ -1029,7 +1029,7 @@ static struct its_ite *vgic_its_alloc_ite(struct its_device *device, { struct its_ite *ite; - ite = kzalloc(sizeof(*ite), GFP_KERNEL); + ite = kzalloc(sizeof(*ite), GFP_KERNEL_ACCOUNT); if (!ite) return ERR_PTR(-ENOMEM); @@ -1150,7 +1150,7 @@ static struct its_device *vgic_its_alloc_device(struct vgic_its *its, { struct its_device *device; - device = kzalloc(sizeof(*device), GFP_KERNEL); + device = kzalloc(sizeof(*device), GFP_KERNEL_ACCOUNT); if (!device) return ERR_PTR(-ENOMEM); @@ -1847,7 +1847,7 @@ void vgic_lpi_translation_cache_init(struct kvm *kvm) struct vgic_translation_cache_entry *cte; /* An allocation failure is not fatal */ - cte = kzalloc(sizeof(*cte), GFP_KERNEL); + cte = kzalloc(sizeof(*cte), GFP_KERNEL_ACCOUNT); if (WARN_ON(!cte)) break; @@ -1888,7 +1888,7 @@ static int vgic_its_create(struct kvm_device *dev, u32 type) if (type != KVM_DEV_TYPE_ARM_VGIC_ITS) return -ENODEV; - its = kzalloc(sizeof(struct vgic_its), GFP_KERNEL); + its = kzalloc(sizeof(struct vgic_its), GFP_KERNEL_ACCOUNT); if (!its) return -ENOMEM; diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c index a09cdc0b953c..d3fd8a6c0c9a 100644 --- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c +++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c @@ -834,7 +834,7 @@ static int vgic_v3_alloc_redist_region(struct kvm *kvm, uint32_t index, if (vgic_v3_rdist_overlap(kvm, base, size)) return -EINVAL; - rdreg = kzalloc(sizeof(*rdreg), GFP_KERNEL); + rdreg = kzalloc(sizeof(*rdreg), GFP_KERNEL_ACCOUNT); if (!rdreg) return -ENOMEM; diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c index c1845d8f5f7e..772dd15a22c7 100644 --- a/arch/arm64/kvm/vgic/vgic-v4.c +++ b/arch/arm64/kvm/vgic/vgic-v4.c @@ -246,7 +246,7 @@ int vgic_v4_init(struct kvm *kvm) nr_vcpus = atomic_read(&kvm->online_vcpus); dist->its_vm.vpes = kcalloc(nr_vcpus, sizeof(*dist->its_vm.vpes), - GFP_KERNEL); + GFP_KERNEL_ACCOUNT); if (!dist->its_vm.vpes) return -ENOMEM; -- cgit From 115bae923ac8bb29ee635e0ed6b4d5a3eec9371e Mon Sep 17 00:00:00 2001 From: Jia He Date: Tue, 7 Sep 2021 20:31:12 +0800 Subject: KVM: arm64: Add memcg accounting to KVM allocations Inspired by commit 254272ce6505 ("kvm: x86: Add memcg accounting to KVM allocations"), it would be better to make arm64 KVM consistent with common kvm codes. The memory allocations of VM scope should be charged into VM process cgroup, hence change GFP_KERNEL to GFP_KERNEL_ACCOUNT. There remain a few cases since these allocations are global, not in VM scope. Signed-off-by: Jia He Reviewed-by: Oliver Upton Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210907123112.10232-3-justin.he@arm.com --- arch/arm64/kvm/arm.c | 6 ++++-- arch/arm64/kvm/mmu.c | 2 +- arch/arm64/kvm/pmu-emul.c | 2 +- arch/arm64/kvm/reset.c | 2 +- 4 files changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index fe102cd2e518..e3d903e1b7da 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -291,10 +291,12 @@ long kvm_arch_dev_ioctl(struct file *filp, struct kvm *kvm_arch_alloc_vm(void) { + size_t sz = sizeof(struct kvm); + if (!has_vhe()) - return kzalloc(sizeof(struct kvm), GFP_KERNEL); + return kzalloc(sz, GFP_KERNEL_ACCOUNT); - return vzalloc(sizeof(struct kvm)); + return __vmalloc(sz, GFP_KERNEL_ACCOUNT | __GFP_HIGHMEM | __GFP_ZERO); } void kvm_arch_free_vm(struct kvm *kvm) diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index 1a94a7ca48f2..da10996dcdf1 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -512,7 +512,7 @@ int kvm_init_stage2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu) return -EINVAL; } - pgt = kzalloc(sizeof(*pgt), GFP_KERNEL); + pgt = kzalloc(sizeof(*pgt), GFP_KERNEL_ACCOUNT); if (!pgt) return -ENOMEM; diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c index 2af3c37445e0..a5e4bbf5e68f 100644 --- a/arch/arm64/kvm/pmu-emul.c +++ b/arch/arm64/kvm/pmu-emul.c @@ -978,7 +978,7 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) mutex_lock(&vcpu->kvm->lock); if (!vcpu->kvm->arch.pmu_filter) { - vcpu->kvm->arch.pmu_filter = bitmap_alloc(nr_events, GFP_KERNEL); + vcpu->kvm->arch.pmu_filter = bitmap_alloc(nr_events, GFP_KERNEL_ACCOUNT); if (!vcpu->kvm->arch.pmu_filter) { mutex_unlock(&vcpu->kvm->lock); return -ENOMEM; diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c index 5ce36b0a3343..acad22ebac12 100644 --- a/arch/arm64/kvm/reset.c +++ b/arch/arm64/kvm/reset.c @@ -106,7 +106,7 @@ static int kvm_vcpu_finalize_sve(struct kvm_vcpu *vcpu) vl > SVE_VL_ARCH_MAX)) return -EIO; - buf = kzalloc(SVE_SIG_REGS_SIZE(sve_vq_from_vl(vl)), GFP_KERNEL); + buf = kzalloc(SVE_SIG_REGS_SIZE(sve_vq_from_vl(vl)), GFP_KERNEL_ACCOUNT); if (!buf) return -ENOMEM; -- cgit From 8a049862c38f0c78b0e01ab5d36db1bffc832675 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 13 Oct 2021 13:03:36 +0100 Subject: KVM: arm64: Fix early exit ptrauth handling The previous rework of the early exit code to provide an EC-based decoding tree missed the fact that we have two trap paths for ptrauth: the instructions (EC_PAC) and the sysregs (EC_SYS64). Rework the handlers to call the ptrauth handling code on both paths. Signed-off-by: Marc Zyngier Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://lore.kernel.org/r/20211013120346.2926621-2-maz@kernel.org --- arch/arm64/kvm/hyp/include/hyp/switch.h | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index 481399bf9b94..4126926c3e06 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -282,14 +282,6 @@ static inline bool handle_tx2_tvm(struct kvm_vcpu *vcpu) static inline bool esr_is_ptrauth_trap(u32 esr) { - u32 ec = ESR_ELx_EC(esr); - - if (ec == ESR_ELx_EC_PAC) - return true; - - if (ec != ESR_ELx_EC_SYS64) - return false; - switch (esr_sys64_to_sysreg(esr)) { case SYS_APIAKEYLO_EL1: case SYS_APIAKEYHI_EL1: @@ -323,8 +315,7 @@ static bool kvm_hyp_handle_ptrauth(struct kvm_vcpu *vcpu, u64 *exit_code) struct kvm_cpu_context *ctxt; u64 val; - if (!vcpu_has_ptrauth(vcpu) || - !esr_is_ptrauth_trap(kvm_vcpu_get_esr(vcpu))) + if (!vcpu_has_ptrauth(vcpu)) return false; ctxt = this_cpu_ptr(&kvm_hyp_ctxt); @@ -353,6 +344,9 @@ static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code) __vgic_v3_perform_cpuif_access(vcpu) == 1) return true; + if (esr_is_ptrauth_trap(kvm_vcpu_get_esr(vcpu))) + return kvm_hyp_handle_ptrauth(vcpu, exit_code); + return false; } -- cgit From ce75916749b8cb5ec795f1157a5c426f6765a48c Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 13 Oct 2021 13:03:37 +0100 Subject: KVM: arm64: pkvm: Use a single function to expose all id-regs Rather than exposing a whole set of helper functions to retrieve individual ID registers, use the existing decoding tree and expose a single helper instead. This allow a number of functions to be made static, and we now have a single entry point to maintain. Signed-off-by: Marc Zyngier Reviewed-by: Andrew Jones Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://lore.kernel.org/r/20211013120346.2926621-3-maz@kernel.org --- arch/arm64/kvm/hyp/include/nvhe/sys_regs.h | 14 +---------- arch/arm64/kvm/hyp/nvhe/pkvm.c | 10 ++++---- arch/arm64/kvm/hyp/nvhe/sys_regs.c | 37 ++++++++++++++++-------------- 3 files changed, 26 insertions(+), 35 deletions(-) diff --git a/arch/arm64/kvm/hyp/include/nvhe/sys_regs.h b/arch/arm64/kvm/hyp/include/nvhe/sys_regs.h index 3288128738aa..8adc13227b1a 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/sys_regs.h +++ b/arch/arm64/kvm/hyp/include/nvhe/sys_regs.h @@ -9,19 +9,7 @@ #include -u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu); -u64 get_pvm_id_aa64pfr1(const struct kvm_vcpu *vcpu); -u64 get_pvm_id_aa64zfr0(const struct kvm_vcpu *vcpu); -u64 get_pvm_id_aa64dfr0(const struct kvm_vcpu *vcpu); -u64 get_pvm_id_aa64dfr1(const struct kvm_vcpu *vcpu); -u64 get_pvm_id_aa64afr0(const struct kvm_vcpu *vcpu); -u64 get_pvm_id_aa64afr1(const struct kvm_vcpu *vcpu); -u64 get_pvm_id_aa64isar0(const struct kvm_vcpu *vcpu); -u64 get_pvm_id_aa64isar1(const struct kvm_vcpu *vcpu); -u64 get_pvm_id_aa64mmfr0(const struct kvm_vcpu *vcpu); -u64 get_pvm_id_aa64mmfr1(const struct kvm_vcpu *vcpu); -u64 get_pvm_id_aa64mmfr2(const struct kvm_vcpu *vcpu); - +u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id); bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code); int kvm_check_pvm_sysreg_table(void); void inject_undef64(struct kvm_vcpu *vcpu); diff --git a/arch/arm64/kvm/hyp/nvhe/pkvm.c b/arch/arm64/kvm/hyp/nvhe/pkvm.c index 633547cc1033..62377fa8a4cb 100644 --- a/arch/arm64/kvm/hyp/nvhe/pkvm.c +++ b/arch/arm64/kvm/hyp/nvhe/pkvm.c @@ -15,7 +15,7 @@ */ static void pvm_init_traps_aa64pfr0(struct kvm_vcpu *vcpu) { - const u64 feature_ids = get_pvm_id_aa64pfr0(vcpu); + const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64PFR0_EL1); u64 hcr_set = HCR_RW; u64 hcr_clear = 0; u64 cptr_set = 0; @@ -62,7 +62,7 @@ static void pvm_init_traps_aa64pfr0(struct kvm_vcpu *vcpu) */ static void pvm_init_traps_aa64pfr1(struct kvm_vcpu *vcpu) { - const u64 feature_ids = get_pvm_id_aa64pfr1(vcpu); + const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64PFR1_EL1); u64 hcr_set = 0; u64 hcr_clear = 0; @@ -81,7 +81,7 @@ static void pvm_init_traps_aa64pfr1(struct kvm_vcpu *vcpu) */ static void pvm_init_traps_aa64dfr0(struct kvm_vcpu *vcpu) { - const u64 feature_ids = get_pvm_id_aa64dfr0(vcpu); + const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64DFR0_EL1); u64 mdcr_set = 0; u64 mdcr_clear = 0; u64 cptr_set = 0; @@ -125,7 +125,7 @@ static void pvm_init_traps_aa64dfr0(struct kvm_vcpu *vcpu) */ static void pvm_init_traps_aa64mmfr0(struct kvm_vcpu *vcpu) { - const u64 feature_ids = get_pvm_id_aa64mmfr0(vcpu); + const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64MMFR0_EL1); u64 mdcr_set = 0; /* Trap Debug Communications Channel registers */ @@ -140,7 +140,7 @@ static void pvm_init_traps_aa64mmfr0(struct kvm_vcpu *vcpu) */ static void pvm_init_traps_aa64mmfr1(struct kvm_vcpu *vcpu) { - const u64 feature_ids = get_pvm_id_aa64mmfr1(vcpu); + const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64MMFR1_EL1); u64 hcr_set = 0; /* Trap LOR */ diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c index 6bde2dc5205c..f125d6a52880 100644 --- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c @@ -82,7 +82,7 @@ static u64 get_restricted_features_unsigned(u64 sys_reg_val, * based on allowed features, system features, and KVM support. */ -u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu) { const struct kvm *kvm = (const struct kvm *)kern_hyp_va(vcpu->kvm); u64 set_mask = 0; @@ -103,7 +103,7 @@ u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu) return (id_aa64pfr0_el1_sys_val & allow_mask) | set_mask; } -u64 get_pvm_id_aa64pfr1(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64pfr1(const struct kvm_vcpu *vcpu) { const struct kvm *kvm = (const struct kvm *)kern_hyp_va(vcpu->kvm); u64 allow_mask = PVM_ID_AA64PFR1_ALLOW; @@ -114,7 +114,7 @@ u64 get_pvm_id_aa64pfr1(const struct kvm_vcpu *vcpu) return id_aa64pfr1_el1_sys_val & allow_mask; } -u64 get_pvm_id_aa64zfr0(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64zfr0(const struct kvm_vcpu *vcpu) { /* * No support for Scalable Vectors, therefore, hyp has no sanitized @@ -124,7 +124,7 @@ u64 get_pvm_id_aa64zfr0(const struct kvm_vcpu *vcpu) return 0; } -u64 get_pvm_id_aa64dfr0(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64dfr0(const struct kvm_vcpu *vcpu) { /* * No support for debug, including breakpoints, and watchpoints, @@ -134,7 +134,7 @@ u64 get_pvm_id_aa64dfr0(const struct kvm_vcpu *vcpu) return 0; } -u64 get_pvm_id_aa64dfr1(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64dfr1(const struct kvm_vcpu *vcpu) { /* * No support for debug, therefore, hyp has no sanitized copy of the @@ -144,7 +144,7 @@ u64 get_pvm_id_aa64dfr1(const struct kvm_vcpu *vcpu) return 0; } -u64 get_pvm_id_aa64afr0(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64afr0(const struct kvm_vcpu *vcpu) { /* * No support for implementation defined features, therefore, hyp has no @@ -154,7 +154,7 @@ u64 get_pvm_id_aa64afr0(const struct kvm_vcpu *vcpu) return 0; } -u64 get_pvm_id_aa64afr1(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64afr1(const struct kvm_vcpu *vcpu) { /* * No support for implementation defined features, therefore, hyp has no @@ -164,12 +164,12 @@ u64 get_pvm_id_aa64afr1(const struct kvm_vcpu *vcpu) return 0; } -u64 get_pvm_id_aa64isar0(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64isar0(const struct kvm_vcpu *vcpu) { return id_aa64isar0_el1_sys_val & PVM_ID_AA64ISAR0_ALLOW; } -u64 get_pvm_id_aa64isar1(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64isar1(const struct kvm_vcpu *vcpu) { u64 allow_mask = PVM_ID_AA64ISAR1_ALLOW; @@ -182,7 +182,7 @@ u64 get_pvm_id_aa64isar1(const struct kvm_vcpu *vcpu) return id_aa64isar1_el1_sys_val & allow_mask; } -u64 get_pvm_id_aa64mmfr0(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64mmfr0(const struct kvm_vcpu *vcpu) { u64 set_mask; @@ -192,22 +192,19 @@ u64 get_pvm_id_aa64mmfr0(const struct kvm_vcpu *vcpu) return (id_aa64mmfr0_el1_sys_val & PVM_ID_AA64MMFR0_ALLOW) | set_mask; } -u64 get_pvm_id_aa64mmfr1(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64mmfr1(const struct kvm_vcpu *vcpu) { return id_aa64mmfr1_el1_sys_val & PVM_ID_AA64MMFR1_ALLOW; } -u64 get_pvm_id_aa64mmfr2(const struct kvm_vcpu *vcpu) +static u64 get_pvm_id_aa64mmfr2(const struct kvm_vcpu *vcpu) { return id_aa64mmfr2_el1_sys_val & PVM_ID_AA64MMFR2_ALLOW; } -/* Read a sanitized cpufeature ID register by its sys_reg_desc. */ -static u64 read_id_reg(const struct kvm_vcpu *vcpu, - struct sys_reg_desc const *r) +/* Read a sanitized cpufeature ID register by its encoding */ +u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id) { - u32 id = reg_to_encoding(r); - switch (id) { case SYS_ID_AA64PFR0_EL1: return get_pvm_id_aa64pfr0(vcpu); @@ -245,6 +242,12 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, return 0; } +static u64 read_id_reg(const struct kvm_vcpu *vcpu, + struct sys_reg_desc const *r) +{ + return pvm_read_id_reg(vcpu, reg_to_encoding(r)); +} + /* * Accessor for AArch32 feature id registers. * -- cgit From 8ffb41888334c1247bd9b4d6ff6c092a90e8d0b8 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 13 Oct 2021 13:03:38 +0100 Subject: KVM: arm64: pkvm: Make the ERR/ERX*_EL1 registers RAZ/WI The ERR*/ERX* registers should be handled as RAZ/WI, and there should be no need to involve EL1 for that. Add a helper that handles such registers, and repaint the sysreg table to declare these registers as RAZ/WI. Signed-off-by: Marc Zyngier Reviewed-by: Andrew Jones Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://lore.kernel.org/r/20211013120346.2926621-4-maz@kernel.org --- arch/arm64/kvm/hyp/nvhe/sys_regs.c | 33 ++++++++++++++++++++++----------- 1 file changed, 22 insertions(+), 11 deletions(-) diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c index f125d6a52880..042a1c0be7e0 100644 --- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c @@ -248,6 +248,16 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, return pvm_read_id_reg(vcpu, reg_to_encoding(r)); } +/* Handler to RAZ/WI sysregs */ +static bool pvm_access_raz_wi(struct kvm_vcpu *vcpu, struct sys_reg_params *p, + const struct sys_reg_desc *r) +{ + if (!p->is_write) + p->regval = 0; + + return true; +} + /* * Accessor for AArch32 feature id registers. * @@ -270,9 +280,7 @@ static bool pvm_access_id_aarch32(struct kvm_vcpu *vcpu, BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1), PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) > ID_AA64PFR0_ELx_64BIT_ONLY); - /* Use 0 for architecturally "unknown" values. */ - p->regval = 0; - return true; + return pvm_access_raz_wi(vcpu, p, r); } /* @@ -301,6 +309,9 @@ static bool pvm_access_id_aarch64(struct kvm_vcpu *vcpu, /* Mark the specified system register as an AArch64 feature id register. */ #define AARCH64(REG) { SYS_DESC(REG), .access = pvm_access_id_aarch64 } +/* Mark the specified system register as Read-As-Zero/Write-Ignored */ +#define RAZ_WI(REG) { SYS_DESC(REG), .access = pvm_access_raz_wi } + /* Mark the specified system register as not being handled in hyp. */ #define HOST_HANDLED(REG) { SYS_DESC(REG), .access = NULL } @@ -388,14 +399,14 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = { HOST_HANDLED(SYS_AFSR1_EL1), HOST_HANDLED(SYS_ESR_EL1), - HOST_HANDLED(SYS_ERRIDR_EL1), - HOST_HANDLED(SYS_ERRSELR_EL1), - HOST_HANDLED(SYS_ERXFR_EL1), - HOST_HANDLED(SYS_ERXCTLR_EL1), - HOST_HANDLED(SYS_ERXSTATUS_EL1), - HOST_HANDLED(SYS_ERXADDR_EL1), - HOST_HANDLED(SYS_ERXMISC0_EL1), - HOST_HANDLED(SYS_ERXMISC1_EL1), + RAZ_WI(SYS_ERRIDR_EL1), + RAZ_WI(SYS_ERRSELR_EL1), + RAZ_WI(SYS_ERXFR_EL1), + RAZ_WI(SYS_ERXCTLR_EL1), + RAZ_WI(SYS_ERXSTATUS_EL1), + RAZ_WI(SYS_ERXADDR_EL1), + RAZ_WI(SYS_ERXMISC0_EL1), + RAZ_WI(SYS_ERXMISC1_EL1), HOST_HANDLED(SYS_TFSR_EL1), HOST_HANDLED(SYS_TFSRE0_EL1), -- cgit From 3c90cb15e2e66bcc526d25133747b2af747f6cd8 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 13 Oct 2021 13:03:39 +0100 Subject: KVM: arm64: pkvm: Drop AArch32-specific registers All the SYS_*32_EL2 registers are AArch32-specific. Since we forbid AArch32, there is no need to handle those in any way. Signed-off-by: Marc Zyngier Reviewed-by: Andrew Jones Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://lore.kernel.org/r/20211013120346.2926621-5-maz@kernel.org --- arch/arm64/kvm/hyp/nvhe/sys_regs.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c index 042a1c0be7e0..e2b3a9e167da 100644 --- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c @@ -452,10 +452,6 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = { HOST_HANDLED(SYS_CNTP_CVAL_EL0), /* Performance Monitoring Registers are restricted. */ - - HOST_HANDLED(SYS_DACR32_EL2), - HOST_HANDLED(SYS_IFSR32_EL2), - HOST_HANDLED(SYS_FPEXC32_EL2), }; /* -- cgit From f3d5ccabab20c1be5838831f460f320a12e5e2c9 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 13 Oct 2021 13:03:40 +0100 Subject: KVM: arm64: pkvm: Drop sysregs that should never be routed to the host A bunch of system registers (most of them MM related) should never trap to the host under any circumstance. Keep them close to our chest. Signed-off-by: Marc Zyngier Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://lore.kernel.org/r/20211013120346.2926621-6-maz@kernel.org --- arch/arm64/kvm/hyp/nvhe/sys_regs.c | 50 -------------------------------------- 1 file changed, 50 deletions(-) diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c index e2b3a9e167da..eb4ee2589316 100644 --- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c @@ -371,34 +371,8 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = { AARCH64(SYS_ID_AA64MMFR1_EL1), AARCH64(SYS_ID_AA64MMFR2_EL1), - HOST_HANDLED(SYS_SCTLR_EL1), - HOST_HANDLED(SYS_ACTLR_EL1), - HOST_HANDLED(SYS_CPACR_EL1), - - HOST_HANDLED(SYS_RGSR_EL1), - HOST_HANDLED(SYS_GCR_EL1), - /* Scalable Vector Registers are restricted. */ - HOST_HANDLED(SYS_TTBR0_EL1), - HOST_HANDLED(SYS_TTBR1_EL1), - HOST_HANDLED(SYS_TCR_EL1), - - HOST_HANDLED(SYS_APIAKEYLO_EL1), - HOST_HANDLED(SYS_APIAKEYHI_EL1), - HOST_HANDLED(SYS_APIBKEYLO_EL1), - HOST_HANDLED(SYS_APIBKEYHI_EL1), - HOST_HANDLED(SYS_APDAKEYLO_EL1), - HOST_HANDLED(SYS_APDAKEYHI_EL1), - HOST_HANDLED(SYS_APDBKEYLO_EL1), - HOST_HANDLED(SYS_APDBKEYHI_EL1), - HOST_HANDLED(SYS_APGAKEYLO_EL1), - HOST_HANDLED(SYS_APGAKEYHI_EL1), - - HOST_HANDLED(SYS_AFSR0_EL1), - HOST_HANDLED(SYS_AFSR1_EL1), - HOST_HANDLED(SYS_ESR_EL1), - RAZ_WI(SYS_ERRIDR_EL1), RAZ_WI(SYS_ERRSELR_EL1), RAZ_WI(SYS_ERXFR_EL1), @@ -408,31 +382,12 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = { RAZ_WI(SYS_ERXMISC0_EL1), RAZ_WI(SYS_ERXMISC1_EL1), - HOST_HANDLED(SYS_TFSR_EL1), - HOST_HANDLED(SYS_TFSRE0_EL1), - - HOST_HANDLED(SYS_FAR_EL1), - HOST_HANDLED(SYS_PAR_EL1), - /* Performance Monitoring Registers are restricted. */ - HOST_HANDLED(SYS_MAIR_EL1), - HOST_HANDLED(SYS_AMAIR_EL1), - /* Limited Ordering Regions Registers are restricted. */ - HOST_HANDLED(SYS_VBAR_EL1), - HOST_HANDLED(SYS_DISR_EL1), - /* GIC CPU Interface registers are restricted. */ - HOST_HANDLED(SYS_CONTEXTIDR_EL1), - HOST_HANDLED(SYS_TPIDR_EL1), - - HOST_HANDLED(SYS_SCXTNUM_EL1), - - HOST_HANDLED(SYS_CNTKCTL_EL1), - HOST_HANDLED(SYS_CCSIDR_EL1), HOST_HANDLED(SYS_CLIDR_EL1), HOST_HANDLED(SYS_CSSELR_EL1), @@ -440,11 +395,6 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = { /* Performance Monitoring Registers are restricted. */ - HOST_HANDLED(SYS_TPIDR_EL0), - HOST_HANDLED(SYS_TPIDRRO_EL0), - - HOST_HANDLED(SYS_SCXTNUM_EL0), - /* Activity Monitoring Registers are restricted. */ HOST_HANDLED(SYS_CNTP_TVAL_EL0), -- cgit From cbca19738472be8156d854663ed724b01255c932 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 13 Oct 2021 13:03:41 +0100 Subject: KVM: arm64: pkvm: Handle GICv3 traps as required Forward accesses to the ICV_*SGI*_EL1 registers to EL1, and emulate ICV_SRE_EL1 by returning a fixed value. This should be enough to support GICv3 in a protected guest. Signed-off-by: Marc Zyngier Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://lore.kernel.org/r/20211013120346.2926621-7-maz@kernel.org --- arch/arm64/kvm/hyp/nvhe/sys_regs.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c index eb4ee2589316..a341bd8ef252 100644 --- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c @@ -4,6 +4,8 @@ * Author: Fuad Tabba */ +#include + #include #include #include @@ -303,6 +305,17 @@ static bool pvm_access_id_aarch64(struct kvm_vcpu *vcpu, return true; } +static bool pvm_gic_read_sre(struct kvm_vcpu *vcpu, + struct sys_reg_params *p, + const struct sys_reg_desc *r) +{ + /* pVMs only support GICv3. 'nuf said. */ + if (!p->is_write) + p->regval = ICC_SRE_EL1_DIB | ICC_SRE_EL1_DFB | ICC_SRE_EL1_SRE; + + return true; +} + /* Mark the specified system register as an AArch32 feature id register. */ #define AARCH32(REG) { SYS_DESC(REG), .access = pvm_access_id_aarch32 } @@ -386,7 +399,10 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = { /* Limited Ordering Regions Registers are restricted. */ - /* GIC CPU Interface registers are restricted. */ + HOST_HANDLED(SYS_ICC_SGI1R_EL1), + HOST_HANDLED(SYS_ICC_ASGI1R_EL1), + HOST_HANDLED(SYS_ICC_SGI0R_EL1), + { SYS_DESC(SYS_ICC_SRE_EL1), .access = pvm_gic_read_sre, }, HOST_HANDLED(SYS_CCSIDR_EL1), HOST_HANDLED(SYS_CLIDR_EL1), -- cgit From 271b7286058da636ab6f5f47722e098ca3a0478b Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 13 Oct 2021 13:03:42 +0100 Subject: KVM: arm64: pkvm: Preserve pending SError on exit from AArch32 Don't drop a potential SError when a guest gets caught red-handed running AArch32 code. Signed-off-by: Marc Zyngier Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://lore.kernel.org/r/20211013120346.2926621-8-maz@kernel.org --- arch/arm64/kvm/hyp/nvhe/switch.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index f25b6353a598..481c365ef144 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -256,7 +256,8 @@ static bool handle_aarch32_guest(struct kvm_vcpu *vcpu, u64 *exit_code) * protected VMs. */ vcpu->arch.target = -1; - *exit_code = ARM_EXCEPTION_IL; + *exit_code &= BIT(ARM_EXIT_WITH_SERROR_BIT); + *exit_code |= ARM_EXCEPTION_IL; return false; } -- cgit From 3061725d162cad0589b012fc6413c9dd0da8f02a Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 13 Oct 2021 13:03:43 +0100 Subject: KVM: arm64: pkvm: Consolidate include files kvm_fixed_config.h is pkvm specific, and would be better placed near its users. At the same time, include/nvhe/sys_regs.h is now almost empty. Merge the two into arch/arm64/kvm/hyp/include/nvhe/fixed_config.h. Signed-off-by: Marc Zyngier Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://lore.kernel.org/r/20211013120346.2926621-9-maz@kernel.org --- arch/arm64/include/asm/kvm_fixed_config.h | 195 ------------------------ arch/arm64/kvm/hyp/include/nvhe/fixed_config.h | 200 +++++++++++++++++++++++++ arch/arm64/kvm/hyp/include/nvhe/sys_regs.h | 17 --- arch/arm64/kvm/hyp/nvhe/pkvm.c | 3 +- arch/arm64/kvm/hyp/nvhe/setup.c | 2 +- arch/arm64/kvm/hyp/nvhe/switch.c | 3 +- arch/arm64/kvm/hyp/nvhe/sys_regs.c | 3 +- 7 files changed, 204 insertions(+), 219 deletions(-) delete mode 100644 arch/arm64/include/asm/kvm_fixed_config.h create mode 100644 arch/arm64/kvm/hyp/include/nvhe/fixed_config.h delete mode 100644 arch/arm64/kvm/hyp/include/nvhe/sys_regs.h diff --git a/arch/arm64/include/asm/kvm_fixed_config.h b/arch/arm64/include/asm/kvm_fixed_config.h deleted file mode 100644 index 0ed06923f7e9..000000000000 --- a/arch/arm64/include/asm/kvm_fixed_config.h +++ /dev/null @@ -1,195 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2021 Google LLC - * Author: Fuad Tabba - */ - -#ifndef __ARM64_KVM_FIXED_CONFIG_H__ -#define __ARM64_KVM_FIXED_CONFIG_H__ - -#include - -/* - * This file contains definitions for features to be allowed or restricted for - * guest virtual machines, depending on the mode KVM is running in and on the - * type of guest that is running. - * - * The ALLOW masks represent a bitmask of feature fields that are allowed - * without any restrictions as long as they are supported by the system. - * - * The RESTRICT_UNSIGNED masks, if present, represent unsigned fields for - * features that are restricted to support at most the specified feature. - * - * If a feature field is not present in either, than it is not supported. - * - * The approach taken for protected VMs is to allow features that are: - * - Needed by common Linux distributions (e.g., floating point) - * - Trivial to support, e.g., supporting the feature does not introduce or - * require tracking of additional state in KVM - * - Cannot be trapped or prevent the guest from using anyway - */ - -/* - * Allow for protected VMs: - * - Floating-point and Advanced SIMD - * - Data Independent Timing - */ -#define PVM_ID_AA64PFR0_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64PFR0_FP) | \ - ARM64_FEATURE_MASK(ID_AA64PFR0_ASIMD) | \ - ARM64_FEATURE_MASK(ID_AA64PFR0_DIT) \ - ) - -/* - * Restrict to the following *unsigned* features for protected VMs: - * - AArch64 guests only (no support for AArch32 guests): - * AArch32 adds complexity in trap handling, emulation, condition codes, - * etc... - * - RAS (v1) - * Supported by KVM - */ -#define PVM_ID_AA64PFR0_RESTRICT_UNSIGNED (\ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL0), ID_AA64PFR0_ELx_64BIT_ONLY) | \ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1), ID_AA64PFR0_ELx_64BIT_ONLY) | \ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL2), ID_AA64PFR0_ELx_64BIT_ONLY) | \ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL3), ID_AA64PFR0_ELx_64BIT_ONLY) | \ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_RAS), ID_AA64PFR0_RAS_V1) \ - ) - -/* - * Allow for protected VMs: - * - Branch Target Identification - * - Speculative Store Bypassing - */ -#define PVM_ID_AA64PFR1_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64PFR1_BT) | \ - ARM64_FEATURE_MASK(ID_AA64PFR1_SSBS) \ - ) - -/* - * Allow for protected VMs: - * - Mixed-endian - * - Distinction between Secure and Non-secure Memory - * - Mixed-endian at EL0 only - * - Non-context synchronizing exception entry and exit - */ -#define PVM_ID_AA64MMFR0_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64MMFR0_BIGENDEL) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR0_SNSMEM) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR0_BIGENDEL0) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR0_EXS) \ - ) - -/* - * Restrict to the following *unsigned* features for protected VMs: - * - 40-bit IPA - * - 16-bit ASID - */ -#define PVM_ID_AA64MMFR0_RESTRICT_UNSIGNED (\ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_PARANGE), ID_AA64MMFR0_PARANGE_40) | \ - FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_ASID), ID_AA64MMFR0_ASID_16) \ - ) - -/* - * Allow for protected VMs: - * - Hardware translation table updates to Access flag and Dirty state - * - Number of VMID bits from CPU - * - Hierarchical Permission Disables - * - Privileged Access Never - * - SError interrupt exceptions from speculative reads - * - Enhanced Translation Synchronization - */ -#define PVM_ID_AA64MMFR1_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64MMFR1_HADBS) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR1_VMIDBITS) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR1_HPD) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR1_PAN) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR1_SPECSEI) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR1_ETS) \ - ) - -/* - * Allow for protected VMs: - * - Common not Private translations - * - User Access Override - * - IESB bit in the SCTLR_ELx registers - * - Unaligned single-copy atomicity and atomic functions - * - ESR_ELx.EC value on an exception by read access to feature ID space - * - TTL field in address operations. - * - Break-before-make sequences when changing translation block size - * - E0PDx mechanism - */ -#define PVM_ID_AA64MMFR2_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64MMFR2_CNP) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_UAO) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_IESB) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_AT) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_IDS) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_TTL) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_BBM) | \ - ARM64_FEATURE_MASK(ID_AA64MMFR2_E0PD) \ - ) - -/* - * No support for Scalable Vectors for protected VMs: - * Requires additional support from KVM, e.g., context-switching and - * trapping at EL2 - */ -#define PVM_ID_AA64ZFR0_ALLOW (0ULL) - -/* - * No support for debug, including breakpoints, and watchpoints for protected - * VMs: - * The Arm architecture mandates support for at least the Armv8 debug - * architecture, which would include at least 2 hardware breakpoints and - * watchpoints. Providing that support to protected guests adds - * considerable state and complexity. Therefore, the reserved value of 0 is - * used for debug-related fields. - */ -#define PVM_ID_AA64DFR0_ALLOW (0ULL) -#define PVM_ID_AA64DFR1_ALLOW (0ULL) - -/* - * No support for implementation defined features. - */ -#define PVM_ID_AA64AFR0_ALLOW (0ULL) -#define PVM_ID_AA64AFR1_ALLOW (0ULL) - -/* - * No restrictions on instructions implemented in AArch64. - */ -#define PVM_ID_AA64ISAR0_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64ISAR0_AES) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_SHA1) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_SHA2) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_CRC32) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_ATOMICS) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_RDM) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_SHA3) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_SM3) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_SM4) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_DP) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_FHM) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_TS) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_TLB) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR0_RNDR) \ - ) - -#define PVM_ID_AA64ISAR1_ALLOW (\ - ARM64_FEATURE_MASK(ID_AA64ISAR1_DPB) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_APA) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_API) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_JSCVT) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_FCMA) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_LRCPC) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_GPA) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_GPI) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_FRINTTS) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_SB) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_SPECRES) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_BF16) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_DGH) | \ - ARM64_FEATURE_MASK(ID_AA64ISAR1_I8MM) \ - ) - -#endif /* __ARM64_KVM_FIXED_CONFIG_H__ */ diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h new file mode 100644 index 000000000000..747fc79ae784 --- /dev/null +++ b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h @@ -0,0 +1,200 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2021 Google LLC + * Author: Fuad Tabba + */ + +#ifndef __ARM64_KVM_FIXED_CONFIG_H__ +#define __ARM64_KVM_FIXED_CONFIG_H__ + +#include + +/* + * This file contains definitions for features to be allowed or restricted for + * guest virtual machines, depending on the mode KVM is running in and on the + * type of guest that is running. + * + * The ALLOW masks represent a bitmask of feature fields that are allowed + * without any restrictions as long as they are supported by the system. + * + * The RESTRICT_UNSIGNED masks, if present, represent unsigned fields for + * features that are restricted to support at most the specified feature. + * + * If a feature field is not present in either, than it is not supported. + * + * The approach taken for protected VMs is to allow features that are: + * - Needed by common Linux distributions (e.g., floating point) + * - Trivial to support, e.g., supporting the feature does not introduce or + * require tracking of additional state in KVM + * - Cannot be trapped or prevent the guest from using anyway + */ + +/* + * Allow for protected VMs: + * - Floating-point and Advanced SIMD + * - Data Independent Timing + */ +#define PVM_ID_AA64PFR0_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64PFR0_FP) | \ + ARM64_FEATURE_MASK(ID_AA64PFR0_ASIMD) | \ + ARM64_FEATURE_MASK(ID_AA64PFR0_DIT) \ + ) + +/* + * Restrict to the following *unsigned* features for protected VMs: + * - AArch64 guests only (no support for AArch32 guests): + * AArch32 adds complexity in trap handling, emulation, condition codes, + * etc... + * - RAS (v1) + * Supported by KVM + */ +#define PVM_ID_AA64PFR0_RESTRICT_UNSIGNED (\ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL0), ID_AA64PFR0_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1), ID_AA64PFR0_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL2), ID_AA64PFR0_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL3), ID_AA64PFR0_ELx_64BIT_ONLY) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_RAS), ID_AA64PFR0_RAS_V1) \ + ) + +/* + * Allow for protected VMs: + * - Branch Target Identification + * - Speculative Store Bypassing + */ +#define PVM_ID_AA64PFR1_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64PFR1_BT) | \ + ARM64_FEATURE_MASK(ID_AA64PFR1_SSBS) \ + ) + +/* + * Allow for protected VMs: + * - Mixed-endian + * - Distinction between Secure and Non-secure Memory + * - Mixed-endian at EL0 only + * - Non-context synchronizing exception entry and exit + */ +#define PVM_ID_AA64MMFR0_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64MMFR0_BIGENDEL) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR0_SNSMEM) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR0_BIGENDEL0) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR0_EXS) \ + ) + +/* + * Restrict to the following *unsigned* features for protected VMs: + * - 40-bit IPA + * - 16-bit ASID + */ +#define PVM_ID_AA64MMFR0_RESTRICT_UNSIGNED (\ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_PARANGE), ID_AA64MMFR0_PARANGE_40) | \ + FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_ASID), ID_AA64MMFR0_ASID_16) \ + ) + +/* + * Allow for protected VMs: + * - Hardware translation table updates to Access flag and Dirty state + * - Number of VMID bits from CPU + * - Hierarchical Permission Disables + * - Privileged Access Never + * - SError interrupt exceptions from speculative reads + * - Enhanced Translation Synchronization + */ +#define PVM_ID_AA64MMFR1_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64MMFR1_HADBS) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_VMIDBITS) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_HPD) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_PAN) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_SPECSEI) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR1_ETS) \ + ) + +/* + * Allow for protected VMs: + * - Common not Private translations + * - User Access Override + * - IESB bit in the SCTLR_ELx registers + * - Unaligned single-copy atomicity and atomic functions + * - ESR_ELx.EC value on an exception by read access to feature ID space + * - TTL field in address operations. + * - Break-before-make sequences when changing translation block size + * - E0PDx mechanism + */ +#define PVM_ID_AA64MMFR2_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64MMFR2_CNP) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_UAO) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_IESB) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_AT) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_IDS) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_TTL) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_BBM) | \ + ARM64_FEATURE_MASK(ID_AA64MMFR2_E0PD) \ + ) + +/* + * No support for Scalable Vectors for protected VMs: + * Requires additional support from KVM, e.g., context-switching and + * trapping at EL2 + */ +#define PVM_ID_AA64ZFR0_ALLOW (0ULL) + +/* + * No support for debug, including breakpoints, and watchpoints for protected + * VMs: + * The Arm architecture mandates support for at least the Armv8 debug + * architecture, which would include at least 2 hardware breakpoints and + * watchpoints. Providing that support to protected guests adds + * considerable state and complexity. Therefore, the reserved value of 0 is + * used for debug-related fields. + */ +#define PVM_ID_AA64DFR0_ALLOW (0ULL) +#define PVM_ID_AA64DFR1_ALLOW (0ULL) + +/* + * No support for implementation defined features. + */ +#define PVM_ID_AA64AFR0_ALLOW (0ULL) +#define PVM_ID_AA64AFR1_ALLOW (0ULL) + +/* + * No restrictions on instructions implemented in AArch64. + */ +#define PVM_ID_AA64ISAR0_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64ISAR0_AES) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_SHA1) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_SHA2) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_CRC32) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_ATOMICS) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_RDM) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_SHA3) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_SM3) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_SM4) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_DP) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_FHM) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_TS) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_TLB) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR0_RNDR) \ + ) + +#define PVM_ID_AA64ISAR1_ALLOW (\ + ARM64_FEATURE_MASK(ID_AA64ISAR1_DPB) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_APA) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_API) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_JSCVT) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_FCMA) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_LRCPC) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_GPA) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_GPI) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_FRINTTS) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_SB) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_SPECRES) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_BF16) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_DGH) | \ + ARM64_FEATURE_MASK(ID_AA64ISAR1_I8MM) \ + ) + +u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id); +bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code); +int kvm_check_pvm_sysreg_table(void); +void inject_undef64(struct kvm_vcpu *vcpu); + +#endif /* __ARM64_KVM_FIXED_CONFIG_H__ */ diff --git a/arch/arm64/kvm/hyp/include/nvhe/sys_regs.h b/arch/arm64/kvm/hyp/include/nvhe/sys_regs.h deleted file mode 100644 index 8adc13227b1a..000000000000 --- a/arch/arm64/kvm/hyp/include/nvhe/sys_regs.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2021 Google LLC - * Author: Fuad Tabba - */ - -#ifndef __ARM64_KVM_NVHE_SYS_REGS_H__ -#define __ARM64_KVM_NVHE_SYS_REGS_H__ - -#include - -u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id); -bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code); -int kvm_check_pvm_sysreg_table(void); -void inject_undef64(struct kvm_vcpu *vcpu); - -#endif /* __ARM64_KVM_NVHE_SYS_REGS_H__ */ diff --git a/arch/arm64/kvm/hyp/nvhe/pkvm.c b/arch/arm64/kvm/hyp/nvhe/pkvm.c index 62377fa8a4cb..99c8d8b73e70 100644 --- a/arch/arm64/kvm/hyp/nvhe/pkvm.c +++ b/arch/arm64/kvm/hyp/nvhe/pkvm.c @@ -6,8 +6,7 @@ #include #include -#include -#include +#include #include /* diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c index c85ff64e63f2..862c7b514e20 100644 --- a/arch/arm64/kvm/hyp/nvhe/setup.c +++ b/arch/arm64/kvm/hyp/nvhe/setup.c @@ -10,11 +10,11 @@ #include #include +#include #include #include #include #include -#include #include struct hyp_pool hpool; diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index 481c365ef144..317dba6a018d 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -28,8 +27,8 @@ #include #include +#include #include -#include /* Non-VHE specific context */ DEFINE_PER_CPU(struct kvm_host_data, kvm_host_data); diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c index a341bd8ef252..052f885e65b2 100644 --- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c @@ -7,12 +7,11 @@ #include #include -#include #include #include -#include +#include #include "../../sys_regs.h" -- cgit From 746bdeadc53b0d58fddea6442591f5ec3eeabe7d Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 13 Oct 2021 13:03:44 +0100 Subject: KVM: arm64: pkvm: Move kvm_handle_pvm_restricted around Place kvm_handle_pvm_restricted() next to its little friends such as kvm_handle_pvm_sysreg(). This allows to make inject_undef64() static. Signed-off-by: Marc Zyngier Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://lore.kernel.org/r/20211013120346.2926621-10-maz@kernel.org --- arch/arm64/kvm/hyp/include/nvhe/fixed_config.h | 2 +- arch/arm64/kvm/hyp/nvhe/switch.c | 12 ------------ arch/arm64/kvm/hyp/nvhe/sys_regs.c | 14 +++++++++++++- 3 files changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h index 747fc79ae784..eea1f6a53723 100644 --- a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h +++ b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h @@ -194,7 +194,7 @@ u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id); bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code); +bool kvm_handle_pvm_restricted(struct kvm_vcpu *vcpu, u64 *exit_code); int kvm_check_pvm_sysreg_table(void); -void inject_undef64(struct kvm_vcpu *vcpu); #endif /* __ARM64_KVM_FIXED_CONFIG_H__ */ diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index 317dba6a018d..be6889e33b2b 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -159,18 +159,6 @@ static void __pmu_switch_to_host(struct kvm_cpu_context *host_ctxt) write_sysreg(pmu->events_host, pmcntenset_el0); } -/** - * Handler for protected VM restricted exceptions. - * - * Inject an undefined exception into the guest and return true to indicate that - * the hypervisor has handled the exit, and control should go back to the guest. - */ -static bool kvm_handle_pvm_restricted(struct kvm_vcpu *vcpu, u64 *exit_code) -{ - inject_undef64(vcpu); - return true; -} - /** * Handler for protected VM MSR, MRS or System instruction execution in AArch64. * diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c index 052f885e65b2..3787ee6fb1a2 100644 --- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c +++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c @@ -30,7 +30,7 @@ u64 id_aa64mmfr2_el1_sys_val; * Inject an unknown/undefined exception to an AArch64 guest while most of its * sysregs are live. */ -void inject_undef64(struct kvm_vcpu *vcpu) +static void inject_undef64(struct kvm_vcpu *vcpu) { u32 esr = (ESR_ELx_EC_UNKNOWN << ESR_ELx_EC_SHIFT); @@ -473,3 +473,15 @@ bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code) return true; } + +/** + * Handler for protected VM restricted exceptions. + * + * Inject an undefined exception into the guest and return true to indicate that + * the hypervisor has handled the exit, and control should go back to the guest. + */ +bool kvm_handle_pvm_restricted(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + inject_undef64(vcpu); + return true; +} -- cgit From 0c7639cc838263b6e38b3af76755d574f15cdf41 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 13 Oct 2021 13:03:45 +0100 Subject: KVM: arm64: pkvm: Pass vpcu instead of kvm to kvm_get_exit_handler_array() Passing a VM pointer around is odd, and results in extra work on VHE. Follow the rest of the design that uses the vcpu instead, and let the nVHE code look into the struct kvm as required. Signed-off-by: Marc Zyngier Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://lore.kernel.org/r/20211013120346.2926621-11-maz@kernel.org --- arch/arm64/kvm/hyp/include/hyp/switch.h | 4 ++-- arch/arm64/kvm/hyp/nvhe/switch.c | 4 ++-- arch/arm64/kvm/hyp/vhe/switch.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index 4126926c3e06..c6e98c7e918b 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -397,7 +397,7 @@ static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code) typedef bool (*exit_handler_fn)(struct kvm_vcpu *, u64 *); -static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm *kvm); +static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu); /* * Allow the hypervisor to handle the exit with an exit handler if it has one. @@ -407,7 +407,7 @@ static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm *kvm); */ static inline bool kvm_hyp_handle_exit(struct kvm_vcpu *vcpu, u64 *exit_code) { - const exit_handler_fn *handlers = kvm_get_exit_handler_array(kern_hyp_va(vcpu->kvm)); + const exit_handler_fn *handlers = kvm_get_exit_handler_array(vcpu); exit_handler_fn fn; fn = handlers[kvm_vcpu_trap_get_class(vcpu)]; diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index be6889e33b2b..50c7d48e0fa0 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -211,9 +211,9 @@ static const exit_handler_fn pvm_exit_handlers[] = { [ESR_ELx_EC_PAC] = kvm_hyp_handle_ptrauth, }; -static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm *kvm) +static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu) { - if (unlikely(kvm_vm_is_protected(kvm))) + if (unlikely(kvm_vm_is_protected(kern_hyp_va(vcpu->kvm)))) return pvm_exit_handlers; return hyp_exit_handlers; diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c index f6fb97accf65..5a2cb5d9bc4b 100644 --- a/arch/arm64/kvm/hyp/vhe/switch.c +++ b/arch/arm64/kvm/hyp/vhe/switch.c @@ -107,7 +107,7 @@ static const exit_handler_fn hyp_exit_handlers[] = { [ESR_ELx_EC_PAC] = kvm_hyp_handle_ptrauth, }; -static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm *kvm) +static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu) { return hyp_exit_handlers; } -- cgit From 07305590114af81817148d181f1eb0af294e40d6 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 13 Oct 2021 13:03:46 +0100 Subject: KVM: arm64: pkvm: Give priority to standard traps over pvm handling Checking for pvm handling first means that we cannot handle ptrauth traps or apply any of the workarounds (GICv3 or TX2 #219). Flip the order around. Signed-off-by: Marc Zyngier Reviewed-by: Fuad Tabba Tested-by: Fuad Tabba Link: https://lore.kernel.org/r/20211013120346.2926621-12-maz@kernel.org --- arch/arm64/kvm/hyp/nvhe/switch.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c index 50c7d48e0fa0..c0e3fed26d93 100644 --- a/arch/arm64/kvm/hyp/nvhe/switch.c +++ b/arch/arm64/kvm/hyp/nvhe/switch.c @@ -167,10 +167,13 @@ static void __pmu_switch_to_host(struct kvm_cpu_context *host_ctxt) */ static bool kvm_handle_pvm_sys64(struct kvm_vcpu *vcpu, u64 *exit_code) { - if (kvm_handle_pvm_sysreg(vcpu, exit_code)) - return true; - - return kvm_hyp_handle_sysreg(vcpu, exit_code); + /* + * Make sure we handle the exit for workarounds and ptrauth + * before the pKVM handling, as the latter could decide to + * UNDEF. + */ + return (kvm_hyp_handle_sysreg(vcpu, exit_code) || + kvm_handle_pvm_sysreg(vcpu, exit_code)); } /** -- cgit From ffb4ce3c49366f02f1c064fbe2e66a96ab5f98b8 Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Tue, 7 Sep 2021 11:09:56 -0700 Subject: KVM: selftests: Make memslot_perf_test arch independent memslot_perf_test uses ucalls for synchronization between guest and host. Ucalls API is architecture independent: tests do not need to know details like what kind of exit they generate on a specific arch. More specifically, there is no need to check whether an exit is KVM_EXIT_IO in x86 for the host to know that the exit is ucall related, as get_ucall() already makes that check. Change memslot_perf_test to not require specifying what exit does a ucall generate. Also add a missing ucall_init. Signed-off-by: Ricardo Koller Reviewed-by: Andrew Jones Reviewed-by: Oliver Upton Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210907180957.609966-2-ricarkol@google.com --- tools/testing/selftests/kvm/memslot_perf_test.c | 56 +++++++++++++++---------- 1 file changed, 34 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/kvm/memslot_perf_test.c b/tools/testing/selftests/kvm/memslot_perf_test.c index d6e381e01db7..1727f75e0c2c 100644 --- a/tools/testing/selftests/kvm/memslot_perf_test.c +++ b/tools/testing/selftests/kvm/memslot_perf_test.c @@ -127,43 +127,54 @@ static bool verbose; pr_info(__VA_ARGS__); \ } while (0) +static void check_mmio_access(struct vm_data *vm, struct kvm_run *run) +{ + TEST_ASSERT(vm->mmio_ok, "Unexpected mmio exit"); + TEST_ASSERT(run->mmio.is_write, "Unexpected mmio read"); + TEST_ASSERT(run->mmio.len == 8, + "Unexpected exit mmio size = %u", run->mmio.len); + TEST_ASSERT(run->mmio.phys_addr >= vm->mmio_gpa_min && + run->mmio.phys_addr <= vm->mmio_gpa_max, + "Unexpected exit mmio address = 0x%llx", + run->mmio.phys_addr); +} + static void *vcpu_worker(void *data) { struct vm_data *vm = data; struct kvm_run *run; struct ucall uc; - uint64_t cmd; run = vcpu_state(vm->vm, VCPU_ID); while (1) { vcpu_run(vm->vm, VCPU_ID); - if (run->exit_reason == KVM_EXIT_IO) { - cmd = get_ucall(vm->vm, VCPU_ID, &uc); - if (cmd != UCALL_SYNC) - break; - + switch (get_ucall(vm->vm, VCPU_ID, &uc)) { + case UCALL_SYNC: + TEST_ASSERT(uc.args[1] == 0, + "Unexpected sync ucall, got %lx", + (ulong)uc.args[1]); sem_post(&vcpu_ready); continue; - } - - if (run->exit_reason != KVM_EXIT_MMIO) + case UCALL_NONE: + if (run->exit_reason == KVM_EXIT_MMIO) + check_mmio_access(vm, run); + else + goto done; break; - - TEST_ASSERT(vm->mmio_ok, "Unexpected mmio exit"); - TEST_ASSERT(run->mmio.is_write, "Unexpected mmio read"); - TEST_ASSERT(run->mmio.len == 8, - "Unexpected exit mmio size = %u", run->mmio.len); - TEST_ASSERT(run->mmio.phys_addr >= vm->mmio_gpa_min && - run->mmio.phys_addr <= vm->mmio_gpa_max, - "Unexpected exit mmio address = 0x%llx", - run->mmio.phys_addr); + case UCALL_ABORT: + TEST_FAIL("%s at %s:%ld, val = %lu", + (const char *)uc.args[0], + __FILE__, uc.args[1], uc.args[2]); + break; + case UCALL_DONE: + goto done; + default: + TEST_FAIL("Unknown ucall %lu", uc.cmd); + } } - if (run->exit_reason == KVM_EXIT_IO && cmd == UCALL_ABORT) - TEST_FAIL("%s at %s:%ld, val = %lu", (const char *)uc.args[0], - __FILE__, uc.args[1], uc.args[2]); - +done: return NULL; } @@ -268,6 +279,7 @@ static bool prepare_vm(struct vm_data *data, int nslots, uint64_t *maxslots, TEST_ASSERT(data->hva_slots, "malloc() fail"); data->vm = vm_create_default(VCPU_ID, mempages, guest_code); + ucall_init(data->vm, NULL); pr_info_v("Adding slots 1..%i, each slot with %"PRIu64" pages + %"PRIu64" extra pages last\n", max_mem_slots - 1, data->pages_per_slot, rempages); -- cgit From 358928fd5264f069b9758f8b29297c7bff2a06de Mon Sep 17 00:00:00 2001 From: Ricardo Koller Date: Tue, 7 Sep 2021 11:09:57 -0700 Subject: KVM: selftests: Build the memslot tests for arm64 Add memslot_perf_test and memslot_modification_stress_test to the list of aarch64 selftests. Signed-off-by: Ricardo Koller Reviewed-by: Andrew Jones Reviewed-by: Oliver Upton Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210907180957.609966-3-ricarkol@google.com --- tools/testing/selftests/kvm/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index d1774f461393..e6fba18d0b2c 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -95,6 +95,8 @@ TEST_GEN_PROGS_aarch64 += dirty_log_test TEST_GEN_PROGS_aarch64 += dirty_log_perf_test TEST_GEN_PROGS_aarch64 += kvm_create_max_vcpus TEST_GEN_PROGS_aarch64 += kvm_page_table_test +TEST_GEN_PROGS_aarch64 += memslot_modification_stress_test +TEST_GEN_PROGS_aarch64 += memslot_perf_test TEST_GEN_PROGS_aarch64 += rseq_test TEST_GEN_PROGS_aarch64 += set_memory_region_test TEST_GEN_PROGS_aarch64 += steal_time -- cgit