From 9646b1346760a0af1035f0c59ba727fca1f5824d Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 12 Dec 2012 10:14:22 +0200
Subject: wlcore: use single-role version when verifying the PLT firmware

The PLT firmware used by wl12xx for calibration always has the same
version number as the single-role firmware.

Currntly the driver rejects the PLT firmware since anything that is
not single-role uses the multi-role version.  Fix this by using the
single-role version for everything except multi-role.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/boot.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c
index b58ae5fc1487..77752b03f189 100644
--- a/drivers/net/wireless/ti/wlcore/boot.c
+++ b/drivers/net/wireless/ti/wlcore/boot.c
@@ -84,8 +84,8 @@ out:
 static int wlcore_validate_fw_ver(struct wl1271 *wl)
 {
 	unsigned int *fw_ver = wl->chip.fw_ver;
-	unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_NORMAL) ?
-		wl->min_sr_fw_ver : wl->min_mr_fw_ver;
+	unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_MULTI) ?
+		wl->min_mr_fw_ver : wl->min_sr_fw_ver;
 	char min_fw_str[32] = "";
 	int i;
 
-- 
cgit 


From 3a0a8d961e20132272887d9826738ce9b4d818f7 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 23 Jan 2013 16:40:34 +0200
Subject: wlcore: remove unused set_power method

There is no platform-specific set_power method anymore.  Power setting
is done in the bus modules (wlcore_sdio and wlcore_spi).

Signed-off-by: Luciano Coelho <coelho@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c   | 1 -
 drivers/net/wireless/ti/wlcore/wlcore.h | 1 -
 2 files changed, 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index e1dfdf94d0f7..9a66acf1205f 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5995,7 +5995,6 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 
 	wl->irq = platform_get_irq(pdev, 0);
 	wl->platform_quirks = pdata->platform_quirks;
-	wl->set_power = pdata->set_power;
 	wl->if_ops = pdata->ops;
 
 	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index ebd8c6fad7cd..af9fecaefc30 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -183,7 +183,6 @@ struct wl1271 {
 
 	struct wl1271_if_operations *if_ops;
 
-	void (*set_power)(bool enable);
 	int irq;
 
 	spinlock_t wl_lock;
-- 
cgit 


From afb43e6d88e587441c960a5d214d2c698d076c9c Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 25 Jan 2013 11:57:48 +0200
Subject: wlcore: remove if_ops from platform_data

We can't pass pointers from the platform data to the modules, because
with DT it cannot be done.  Those pointers are not set by the board
files anyway.  It's the bus modules that set them, so they can be
safely removed from the platform data without changing any board
files.

Create a new structure that the bus modules pass to wlcore.  This
structure contains the if_ops pointers and a pointer to the actual
platform data.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
---
 drivers/net/wireless/ti/wl12xx/main.c     |  3 ++-
 drivers/net/wireless/ti/wlcore/main.c     |  5 +++--
 drivers/net/wireless/ti/wlcore/sdio.c     | 22 +++++++++++++++++-----
 drivers/net/wireless/ti/wlcore/spi.c      | 20 +++++++++++++++++---
 drivers/net/wireless/ti/wlcore/wlcore_i.h |  5 +++++
 include/linux/wl12xx.h                    |  2 --
 6 files changed, 44 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 3254bfc81a2a..09694e39bb14 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1703,7 +1703,8 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
 static int wl12xx_setup(struct wl1271 *wl)
 {
 	struct wl12xx_priv *priv = wl->priv;
-	struct wl12xx_platform_data *pdata = wl->pdev->dev.platform_data;
+	struct wlcore_platdev_data *pdev_data = wl->pdev->dev.platform_data;
+	struct wl12xx_platform_data *pdata = pdev_data->pdata;
 
 	wl->rtable = wl12xx_rtable;
 	wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS;
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 9a66acf1205f..cd70335cd5e8 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5966,7 +5966,8 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 {
 	struct wl1271 *wl = context;
 	struct platform_device *pdev = wl->pdev;
-	struct wl12xx_platform_data *pdata = pdev->dev.platform_data;
+	struct wlcore_platdev_data *pdev_data = pdev->dev.platform_data;
+	struct wl12xx_platform_data *pdata = pdev_data->pdata;
 	unsigned long irqflags;
 	int ret;
 
@@ -5995,7 +5996,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 
 	wl->irq = platform_get_irq(pdev, 0);
 	wl->platform_quirks = pdata->platform_quirks;
-	wl->if_ops = pdata->ops;
+	wl->if_ops = pdev_data->if_ops;
 
 	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
 		irqflags = IRQF_TRIGGER_RISING;
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index d4f184e2efed..1f6f6e30daca 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -218,6 +218,7 @@ static int wl1271_probe(struct sdio_func *func,
 				  const struct sdio_device_id *id)
 {
 	struct wl12xx_platform_data *wlan_data;
+	struct wlcore_platdev_data *pdev_data;
 	struct wl12xx_sdio_glue *glue;
 	struct resource res[1];
 	mmc_pm_flag_t mmcflags;
@@ -228,10 +229,18 @@ static int wl1271_probe(struct sdio_func *func,
 	if (func->num != 0x02)
 		return -ENODEV;
 
+	pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL);
+	if (!pdev_data) {
+		dev_err(&func->dev, "can't allocate platdev_data\n");
+		goto out;
+	}
+
+	pdev_data->if_ops = &sdio_ops;
+
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
 	if (!glue) {
 		dev_err(&func->dev, "can't allocate glue\n");
-		goto out;
+		goto out_free_pdev_data;
 	}
 
 	glue->dev = &func->dev;
@@ -256,8 +265,6 @@ static int wl1271_probe(struct sdio_func *func,
 	if (mmcflags & MMC_PM_KEEP_POWER)
 		wlan_data->pwr_in_suspend = true;
 
-	wlan_data->ops = &sdio_ops;
-
 	sdio_set_drvdata(func, glue);
 
 	/* Tell PM core that we don't need the card to be powered now */
@@ -295,8 +302,10 @@ static int wl1271_probe(struct sdio_func *func,
 		goto out_dev_put;
 	}
 
-	ret = platform_device_add_data(glue->core, wlan_data,
-				       sizeof(*wlan_data));
+	pdev_data->pdata = wlan_data;
+
+	ret = platform_device_add_data(glue->core, pdev_data,
+				       sizeof(*pdev_data));
 	if (ret) {
 		dev_err(glue->dev, "can't add platform data\n");
 		goto out_dev_put;
@@ -315,6 +324,9 @@ out_dev_put:
 out_free_glue:
 	kfree(glue);
 
+out_free_pdev_data:
+	kfree(pdev_data);
+
 out:
 	return ret;
 }
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index 2d700b7ae14c..d437f4d28bd0 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -328,6 +328,7 @@ static int wl1271_probe(struct spi_device *spi)
 {
 	struct wl12xx_spi_glue *glue;
 	struct wl12xx_platform_data *pdata;
+	struct wlcore_platdev_data *pdev_data;
 	struct resource res[1];
 	int ret = -ENOMEM;
 
@@ -337,12 +338,18 @@ static int wl1271_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
-	pdata->ops = &spi_ops;
+	pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL);
+	if (!pdev_data) {
+		dev_err(&spi->dev, "can't allocate platdev_data\n");
+		goto out;
+	}
+
+	pdev_data->if_ops = &spi_ops;
 
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
 	if (!glue) {
 		dev_err(&spi->dev, "can't allocate glue\n");
-		goto out;
+		goto out_free_pdev_data;
 	}
 
 	glue->dev = &spi->dev;
@@ -380,7 +387,10 @@ static int wl1271_probe(struct spi_device *spi)
 		goto out_dev_put;
 	}
 
-	ret = platform_device_add_data(glue->core, pdata, sizeof(*pdata));
+	pdev_data->pdata = pdata;
+
+	ret = platform_device_add_data(glue->core, pdev_data,
+				       sizeof(*pdev_data));
 	if (ret) {
 		dev_err(glue->dev, "can't add platform data\n");
 		goto out_dev_put;
@@ -399,6 +409,10 @@ out_dev_put:
 
 out_free_glue:
 	kfree(glue);
+
+out_free_pdev_data:
+	kfree(pdev_data);
+
 out:
 	return ret;
 }
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index 20316ac328a2..c845b0ef7f4b 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -206,6 +206,11 @@ struct wl1271_if_operations {
 	void (*set_block_size) (struct device *child, unsigned int blksz);
 };
 
+struct wlcore_platdev_data {
+	struct wl12xx_platform_data *pdata;
+	struct wl1271_if_operations *if_ops;
+};
+
 #define MAX_NUM_KEYS 14
 #define MAX_KEY_SIZE 32
 
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index 0d6373195d32..360c9bce665c 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -55,8 +55,6 @@ struct wl12xx_platform_data {
 	int board_tcxo_clock;
 	unsigned long platform_quirks;
 	bool pwr_in_suspend;
-
-	struct wl1271_if_operations *ops;
 };
 
 /* Platform does not support level trigger interrupts */
-- 
cgit 


From 91147a6cd0f599e1e2f5a904c37d73df58f9508f Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 23 Jan 2013 16:40:36 +0200
Subject: wlcore: use wl12xx_platform_data pointer from wlcore_pdev_data

Just a small cleanup to use the pointer provided by wlcore_pdev_data
instead of using a separate pointer then copying.

Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/sdio.c | 13 +++++--------
 drivers/net/wireless/ti/wlcore/spi.c  | 16 +++++++---------
 2 files changed, 12 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 1f6f6e30daca..6d2884f040c7 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -217,7 +217,6 @@ static struct wl1271_if_operations sdio_ops = {
 static int wl1271_probe(struct sdio_func *func,
 				  const struct sdio_device_id *id)
 {
-	struct wl12xx_platform_data *wlan_data;
 	struct wlcore_platdev_data *pdev_data;
 	struct wl12xx_sdio_glue *glue;
 	struct resource res[1];
@@ -251,9 +250,9 @@ static int wl1271_probe(struct sdio_func *func,
 	/* Use block mode for transferring over one block size of data */
 	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
 
-	wlan_data = wl12xx_get_platform_data();
-	if (IS_ERR(wlan_data)) {
-		ret = PTR_ERR(wlan_data);
+	pdev_data->pdata = wl12xx_get_platform_data();
+	if (IS_ERR(pdev_data->pdata)) {
+		ret = PTR_ERR(pdev_data->pdata);
 		dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
 		goto out_free_glue;
 	}
@@ -263,7 +262,7 @@ static int wl1271_probe(struct sdio_func *func,
 	dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags);
 
 	if (mmcflags & MMC_PM_KEEP_POWER)
-		wlan_data->pwr_in_suspend = true;
+		pdev_data->pdata->pwr_in_suspend = true;
 
 	sdio_set_drvdata(func, glue);
 
@@ -292,7 +291,7 @@ static int wl1271_probe(struct sdio_func *func,
 
 	memset(res, 0x00, sizeof(res));
 
-	res[0].start = wlan_data->irq;
+	res[0].start = pdev_data->pdata->irq;
 	res[0].flags = IORESOURCE_IRQ;
 	res[0].name = "irq";
 
@@ -302,8 +301,6 @@ static int wl1271_probe(struct sdio_func *func,
 		goto out_dev_put;
 	}
 
-	pdev_data->pdata = wlan_data;
-
 	ret = platform_device_add_data(glue->core, pdev_data,
 				       sizeof(*pdev_data));
 	if (ret) {
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index d437f4d28bd0..d62a20b99190 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -327,23 +327,23 @@ static struct wl1271_if_operations spi_ops = {
 static int wl1271_probe(struct spi_device *spi)
 {
 	struct wl12xx_spi_glue *glue;
-	struct wl12xx_platform_data *pdata;
 	struct wlcore_platdev_data *pdev_data;
 	struct resource res[1];
 	int ret = -ENOMEM;
 
-	pdata = spi->dev.platform_data;
-	if (!pdata) {
-		dev_err(&spi->dev, "no platform data\n");
-		return -ENODEV;
-	}
-
 	pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL);
 	if (!pdev_data) {
 		dev_err(&spi->dev, "can't allocate platdev_data\n");
 		goto out;
 	}
 
+	pdev_data->pdata = spi->dev.platform_data;
+	if (!pdev_data->pdata) {
+		dev_err(&spi->dev, "no platform data\n");
+		ret = -ENODEV;
+		goto out_free_pdev_data;
+	}
+
 	pdev_data->if_ops = &spi_ops;
 
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
@@ -387,8 +387,6 @@ static int wl1271_probe(struct spi_device *spi)
 		goto out_dev_put;
 	}
 
-	pdev_data->pdata = pdata;
-
 	ret = platform_device_add_data(glue->core, pdev_data,
 				       sizeof(*pdev_data));
 	if (ret) {
-- 
cgit 


From 06ab4058ea418d8503458bea386961b9dd554356 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 23 Jan 2013 16:40:37 +0200
Subject: wlcore: use PLATFORM_DEVID_AUTO for plat dev creation to avoid
 conflicts

The platform devices can be created by both wlcore_sdio and
wlcore_spi.  Theoretically, if both are connected to the same board,
there will be a conflict.

Reported-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/sdio.c | 2 +-
 drivers/net/wireless/ti/wlcore/spi.c  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 6d2884f040c7..198028df6f4b 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -280,7 +280,7 @@ static int wl1271_probe(struct sdio_func *func,
 	else
 		chip_family = "wl12xx";
 
-	glue->core = platform_device_alloc(chip_family, -1);
+	glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO);
 	if (!glue->core) {
 		dev_err(glue->dev, "can't allocate platform_device");
 		ret = -ENOMEM;
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index d62a20b99190..5ad2e100e59b 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -366,7 +366,7 @@ static int wl1271_probe(struct spi_device *spi)
 		goto out_free_glue;
 	}
 
-	glue->core = platform_device_alloc("wl12xx", -1);
+	glue->core = platform_device_alloc("wl12xx", PLATFORM_DEVID_AUTO);
 	if (!glue->core) {
 		dev_err(glue->dev, "can't allocate platform_device\n");
 		ret = -ENOMEM;
-- 
cgit 


From 6cc9efed707c575a9e5880ea68f8b9d36b235f1f Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Fri, 25 Jan 2013 12:05:34 +0200
Subject: wlcore: move wl12xx_platform_data up and make it truly optional

The platform data is used not only by wlcore-based drivers, but also
by wl1251.  Move it up in the directory hierarchy to reflect this.

Additionally, make it truly optional.  At the moment, disabling
platform data while wl1251_sdio or wlcore_sdio are enabled doesn't
work, but it will be necessary when device tree support is
implemented.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
---
 arch/arm/mach-omap2/board-omap3evm.c               | 10 ++---
 drivers/net/wireless/ti/Kconfig                    |  9 ++++
 drivers/net/wireless/ti/Makefile                   |  4 +-
 drivers/net/wireless/ti/wilink_platform_data.c     | 49 ++++++++++++++++++++++
 drivers/net/wireless/ti/wlcore/Kconfig             |  5 ---
 drivers/net/wireless/ti/wlcore/Makefile            |  3 --
 .../net/wireless/ti/wlcore/wl12xx_platform_data.c  | 49 ----------------------
 include/linux/wl12xx.h                             | 14 +++++--
 8 files changed, 77 insertions(+), 66 deletions(-)
 create mode 100644 drivers/net/wireless/ti/wilink_platform_data.c
 delete mode 100644 drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3985f35aee06..a4ca63ba7faa 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -309,7 +309,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.gpio_wp	= 63,
 		.deferred	= true,
 	},
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 	{
 		.name		= "wl1271",
 		.mmc		= 2,
@@ -450,7 +450,7 @@ static struct regulator_init_data omap3evm_vio = {
 	.consumer_supplies	= omap3evm_vio_supply,
 };
 
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 
 #define OMAP3EVM_WLAN_PMENA_GPIO	(150)
 #define OMAP3EVM_WLAN_IRQ_GPIO		(149)
@@ -563,7 +563,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = {
 				OMAP_PIN_OFF_NONE),
 	OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
 				OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 	/* WLAN IRQ - GPIO 149 */
 	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 
@@ -601,7 +601,7 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = {
 	OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
 	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
 	OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 	/* WLAN IRQ - GPIO 149 */
 	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 
@@ -637,7 +637,7 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = {
 
 static void __init omap3_evm_wl12xx_init(void)
 {
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 	int ret;
 
 	/* WL12xx WLAN Init */
diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig
index be800119d0a3..cbe1e7fef61b 100644
--- a/drivers/net/wireless/ti/Kconfig
+++ b/drivers/net/wireless/ti/Kconfig
@@ -12,4 +12,13 @@ source "drivers/net/wireless/ti/wl18xx/Kconfig"
 
 # keep last for automatic dependencies
 source "drivers/net/wireless/ti/wlcore/Kconfig"
+
+config WILINK_PLATFORM_DATA
+	bool "TI WiLink platform data"
+	depends on WLCORE_SDIO || WL1251_SDIO
+	default y
+	---help---
+	Small platform data bit needed to pass data to the sdio modules.
+
+
 endif # WL_TI
diff --git a/drivers/net/wireless/ti/Makefile b/drivers/net/wireless/ti/Makefile
index 4d6823983c04..af14231aeede 100644
--- a/drivers/net/wireless/ti/Makefile
+++ b/drivers/net/wireless/ti/Makefile
@@ -1,5 +1,7 @@
 obj-$(CONFIG_WLCORE)			+= wlcore/
 obj-$(CONFIG_WL12XX)			+= wl12xx/
-obj-$(CONFIG_WL12XX_PLATFORM_DATA)	+= wlcore/
 obj-$(CONFIG_WL1251)			+= wl1251/
 obj-$(CONFIG_WL18XX)			+= wl18xx/
+
+# small builtin driver bit
+obj-$(CONFIG_WILINK_PLATFORM_DATA)	+= wilink_platform_data.o
diff --git a/drivers/net/wireless/ti/wilink_platform_data.c b/drivers/net/wireless/ti/wilink_platform_data.c
new file mode 100644
index 000000000000..998e95895f9d
--- /dev/null
+++ b/drivers/net/wireless/ti/wilink_platform_data.c
@@ -0,0 +1,49 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/wl12xx.h>
+
+static struct wl12xx_platform_data *platform_data;
+
+int __init wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
+{
+	if (platform_data)
+		return -EBUSY;
+	if (!data)
+		return -EINVAL;
+
+	platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
+	if (!platform_data)
+		return -ENOMEM;
+
+	return 0;
+}
+
+struct wl12xx_platform_data *wl12xx_get_platform_data(void)
+{
+	if (!platform_data)
+		return ERR_PTR(-ENODEV);
+
+	return platform_data;
+}
+EXPORT_SYMBOL(wl12xx_get_platform_data);
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
index d7b907e67170..2b832825c3d4 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -33,8 +33,3 @@ config WLCORE_SDIO
 
 	  If you choose to build a module, it'll be called wlcore_sdio.
 	  Say N if unsure.
-
-config WL12XX_PLATFORM_DATA
-	bool
-	depends on WLCORE_SDIO != n || WL1251_SDIO != n
-	default y
diff --git a/drivers/net/wireless/ti/wlcore/Makefile b/drivers/net/wireless/ti/wlcore/Makefile
index d9fba9e32130..b21398f6c3ec 100644
--- a/drivers/net/wireless/ti/wlcore/Makefile
+++ b/drivers/net/wireless/ti/wlcore/Makefile
@@ -9,7 +9,4 @@ obj-$(CONFIG_WLCORE)			+= wlcore.o
 obj-$(CONFIG_WLCORE_SPI)		+= wlcore_spi.o
 obj-$(CONFIG_WLCORE_SDIO)		+= wlcore_sdio.o
 
-# small builtin driver bit
-obj-$(CONFIG_WL12XX_PLATFORM_DATA)	+= wl12xx_platform_data.o
-
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c b/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c
deleted file mode 100644
index 998e95895f9d..000000000000
--- a/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2010-2011 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/wl12xx.h>
-
-static struct wl12xx_platform_data *platform_data;
-
-int __init wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
-{
-	if (platform_data)
-		return -EBUSY;
-	if (!data)
-		return -EINVAL;
-
-	platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
-	if (!platform_data)
-		return -ENOMEM;
-
-	return 0;
-}
-
-struct wl12xx_platform_data *wl12xx_get_platform_data(void)
-{
-	if (!platform_data)
-		return ERR_PTR(-ENODEV);
-
-	return platform_data;
-}
-EXPORT_SYMBOL(wl12xx_get_platform_data);
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index 360c9bce665c..a54fe82e704b 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -24,6 +24,8 @@
 #ifndef _LINUX_WL12XX_H
 #define _LINUX_WL12XX_H
 
+#include <linux/err.h>
+
 /* Reference clock values */
 enum {
 	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
@@ -60,10 +62,12 @@ struct wl12xx_platform_data {
 /* Platform does not support level trigger interrupts */
 #define WL12XX_PLATFORM_QUIRK_EDGE_IRQ	BIT(0)
 
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 
 int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
 
+struct wl12xx_platform_data *wl12xx_get_platform_data(void);
+
 #else
 
 static inline
@@ -72,8 +76,12 @@ int wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
 	return -ENOSYS;
 }
 
-#endif
+static inline
+struct wl12xx_platform_data *wl12xx_get_platform_data(void)
+{
+	return ERR_PTR(-ENODATA);
+}
 
-struct wl12xx_platform_data *wl12xx_get_platform_data(void);
+#endif
 
 #endif
-- 
cgit 


From 5dc283fe9ab360433aa05fcbe0f43cad40f68774 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 30 Jan 2013 10:53:14 +0200
Subject: wlcore: don't hide real error code when booting fails

There's no need to hide the actual error that was reported when
booting fails.  For instance, on I/O error, we were returing
-EINVALID, which doesn't make sense at all.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index cd70335cd5e8..28a37576d568 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2162,7 +2162,7 @@ static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif)
 	return 0;
 }
 
-static bool wl12xx_init_fw(struct wl1271 *wl)
+static int wl12xx_init_fw(struct wl1271 *wl)
 {
 	int retries = WL1271_BOOT_RETRIES;
 	bool booted = false;
@@ -2228,7 +2228,7 @@ power_off:
 
 	wl->state = WLCORE_STATE_ON;
 out:
-	return booted;
+	return ret;
 }
 
 static bool wl12xx_dev_role_started(struct wl12xx_vif *wlvif)
@@ -2371,7 +2371,6 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
 	struct vif_counter_data vif_count;
 	int ret = 0;
 	u8 role_type;
-	bool booted = false;
 
 	vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
 			     IEEE80211_VIF_SUPPORTS_CQM_RSSI;
@@ -2432,11 +2431,9 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
 		 */
 		memcpy(wl->addresses[0].addr, vif->addr, ETH_ALEN);
 
-		booted = wl12xx_init_fw(wl);
-		if (!booted) {
-			ret = -EINVAL;
+		ret = wl12xx_init_fw(wl);
+		if (ret < 0)
 			goto out;
-		}
 	}
 
 	ret = wl12xx_cmd_role_enable(wl, vif->addr,
-- 
cgit 


From 1d6146659ef7ae10263d490a9554ff0bfc7f6ecd Mon Sep 17 00:00:00 2001
From: Victor Goldenshtein <victorg@ti.com>
Date: Thu, 27 Dec 2012 15:49:47 +0200
Subject: wl18xx: add new phy configuration parameters for telec support

Add back-off settings to the wl18xx_mac_and_phy_params.  We had an
empty space where the new parameters are added, so this change doesn't
affect backwards-compatibility with older firmwares.

Update WL18XX_CONF_VERSION accordingly.

Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl18xx/conf.h | 7 ++++---
 drivers/net/wireless/ti/wl18xx/main.c | 5 +++++
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h
index b5f114857191..e34302e3b51d 100644
--- a/drivers/net/wireless/ti/wl18xx/conf.h
+++ b/drivers/net/wireless/ti/wl18xx/conf.h
@@ -23,7 +23,7 @@
 #define __WL18XX_CONF_H__
 
 #define WL18XX_CONF_MAGIC	0x10e100ca
-#define WL18XX_CONF_VERSION	(WLCORE_CONF_VERSION | 0x0005)
+#define WL18XX_CONF_VERSION	(WLCORE_CONF_VERSION | 0x0006)
 #define WL18XX_CONF_MASK	0x0000ffff
 #define WL18XX_CONF_SIZE	(WLCORE_CONF_SIZE + \
 				 sizeof(struct wl18xx_priv_conf))
@@ -70,8 +70,9 @@ struct wl18xx_mac_and_phy_params {
 	u8 pwr_limit_reference_11_abg;
 	u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
 	u8 pwr_limit_reference_11p;
-	u8 spare1[9];
-	u8 spare2[9];
+	u8 spare1;
+	u8 per_chan_bo_mode_11_abg[13];
+	u8 per_chan_bo_mode_11_p[4];
 	u8 primary_clock_setting_time;
 	u8 clock_valid_on_wake_up;
 	u8 secondary_clock_setting_time;
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 0be1cfc17a86..a10b7a7a215a 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -547,6 +547,11 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
 			0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 			0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
 		.pwr_limit_reference_11p	= 0x64,
+		.per_chan_bo_mode_11_abg	= { 0x00, 0x00, 0x00, 0x00,
+						    0x00, 0x00, 0x00, 0x00,
+						    0x00, 0x00, 0x00, 0x00,
+						    0x00 },
+		.per_chan_bo_mode_11_p		= { 0x00, 0x00, 0x00, 0x00 },
 		.per_chan_pwr_limit_arr_11p	= { 0xff, 0xff, 0xff, 0xff,
 						    0xff, 0xff, 0xff },
 		.psat				= 0,
-- 
cgit 


From 9c3a8d99346040010a82ae8088b055f85cf8a2e9 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Thu, 7 Feb 2013 11:35:33 +0200
Subject: wlcore: fix wrong remote rates when starting STA role

In wl18xx, we use a new ACX command in order to set the remote
supported rates, once we know it (ie. after association).  The wl12xx
firmware doesn't support changing the rates after the STA is started,
so we need to use all supported rates.

Commit 530abe19 (wlcore: add ACX_PEER_CAP command) broke that by using
wlvif->rate_set when starting the STA role.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/cmd.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index 1201aca9c89a..6331f9e1cb39 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -510,10 +510,12 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 	cmd->sta.hlid = wlvif->sta.hlid;
 	cmd->sta.session = wl->session_ids[wlvif->sta.hlid];
 	/*
-	 * We don't have the correct remote rates in this stage. the rates
-	 * will be reconfigured later, after authorization.
+	 * We don't have the correct remote rates in this stage.  The
+	 * rates will be reconfigured later, after association, if the
+	 * firmware supports ACX_PEER_CAP.  Otherwise, there's nothing
+	 * we can do, so use all supported_rates here.
 	 */
-	cmd->sta.remote_rates = cpu_to_le32(wlvif->rate_set);
+	cmd->sta.remote_rates = cpu_to_le32(supported_rates);
 
 	wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d "
 		     "basic_rate_set: 0x%x, remote_rates: 0x%x",
-- 
cgit