From fc32ca1ea6f74c1be7abf9d21b0bac8bce11bec3 Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Tue, 21 Dec 2021 11:00:14 +0800 Subject: dt-bindings: arm: amlogic: add S4 based AQ222 bindings Add bindings for the new Amlogic S4 SoC family, and add binds the compatible for the Amlogic S4 Based AQ222 board. S4 is an application processor designed for hybrid OTT/IP Set To Box(STB) and high-end media box applications, with quad core Cortex-A35. Signed-off-by: Xianwei Zhao Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20211221030014.434-1-xianwei.zhao@amlogic.com --- Documentation/devicetree/bindings/arm/amlogic.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 36081734f720..31df120d73b0 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -183,6 +183,12 @@ properties: - amlogic,ad401 - const: amlogic,a1 + - description: Boards with the Amlogic Meson S4 S805X2 SoC + items: + - enum: + - amlogic,aq222 + - const: amlogic,s4 + additionalProperties: true ... -- cgit From 86f2159468d55aca1793c1f0f3d95213501b32f3 Mon Sep 17 00:00:00 2001 From: Artem Lapkin Date: Wed, 15 Dec 2021 11:02:36 +0800 Subject: arm64: dts: meson-sm1: add spdifin and pdifout nodes Add spdifin spdifout nodes for Amlogic SM1 SoCs. Signed-off-by: Artem Lapkin Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong [narmstrong: subject and DT fixups from mailing-list review] Link: https://lore.kernel.org/r/20211215030236.340841-1-art@khadas.com --- arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 3d8b1f4f2001..3c07a89bfd27 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -356,6 +356,33 @@ status = "disabled"; }; + spdifin: audio-controller@400 { + compatible = "amlogic,g12a-spdifin", + "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + resets = <&clkc_audio AUD_RESET_SPDIFIN>; + status = "disabled"; + }; + + spdifout_a: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_A"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + resets = <&clkc_audio AUD_RESET_SPDIFOUT>; + status = "disabled"; + }; + tdmout_a: audio-controller@500 { compatible = "amlogic,sm1-tdmout"; reg = <0x0 0x500 0x0 0x40>; -- cgit From b5a03ecec30c1a71d51de3e73a2e7ab23c3ddeb6 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Wed, 12 Jan 2022 02:27:05 +0000 Subject: arm64: dts: meson: add common SM1 ac2xx dtsi Add a common dtsi for Android STB devices based on the Amlogic S905X3 (AC213/AC214) and S905D3 (AC201/AC202) reference designs. The dtsi is loosely based on the existing SEI610 device-tree. Signed-off-by: Christian Hewitt Tested-by: Martin Blumenstingl # X96-Air with Gbit PHY Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-2-christianshewitt@gmail.com --- arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi | 300 +++++++++++++++++++++++ 1 file changed, 300 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi new file mode 100644 index 000000000000..46a34731f7e2 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt + * + * AC200/AC202 = S905D3 + * AC213/AC214 = S905X3 + * + */ + +#include "meson-sm1.dtsi" +#include +#include +#include + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddcpu: regulator-vddcpu { + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1500 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddio_ao1v8: regulator-vddio_ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_ab { + status = "okay"; + pinctrl-0 = <&pwm_ao_a_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr104; + max-frequency = <200000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; +}; + +/* SD Card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + /* CRC errors are observed at 50MHz */ + max-frequency = <35000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "otg"; +}; -- cgit From d2ecf5ae59c8eef9fe2ad20d83977c2889646d4c Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Wed, 12 Jan 2022 02:27:06 +0000 Subject: dt-bindings: arm: amlogic: add X96-AIR bindings Add board bindings for the Amediatech X96-AIR STB which ships with model variants distiguished by Ethernet configuration: models using an external Gigabit PHY have a -gbit suffix, while models using an internal 10/100 PHY have no suffix. Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-3-christianshewitt@gmail.com --- Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 31df120d73b0..b5b995941d3b 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -170,6 +170,8 @@ properties: - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC items: - enum: + - amediatech,x96-air + - amediatech,x96-air-gbit - bananapi,bpi-m5 - hardkernel,odroid-c4 - hardkernel,odroid-hc4 -- cgit From 37875d9dcb42d489ba28518b50fed0b2ba768b03 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Wed, 12 Jan 2022 02:27:07 +0000 Subject: arm64: dts: meson: add initial device-trees for X96-AIR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Amediatek X96-AIR is based on Amlogic S905X3 reference board designs and ships in multiple configurations: – 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet – 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet – 4GB DDR3 + 32GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet – 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet ... - HDMI 2.1 video - S/PDIF optical output - AV output - 2x USB 2.0 inc. OTG port - 1x USB 3.0 port - IR receiver - 1x micro SD card slot (internal) - 1x Reset/Update button (in AV jack) - 7-segment VFD The device-tree with -gbit suffix supports models with Gigabit Ethernet, and the device-tree with no suffix supports models with 10/100 Ethernet. Signed-off-by: Christian Hewitt Tested-by: Martin Blumenstingl # X96-Air with Gbit PHY Tested-by: Piotr Oniszczuk # X96-Air with 10/100 Eth Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-4-christianshewitt@gmail.com --- arch/arm64/boot/dts/amlogic/Makefile | 2 + .../boot/dts/amlogic/meson-sm1-x96-air-gbit.dts | 133 +++++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts | 112 +++++++++++++++++ 3 files changed, 247 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 5148cd9e5146..1c0e554f54fc 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -56,4 +56,6 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts new file mode 100644 index 000000000000..7e1a74046ba5 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt + */ + +/dts-v1/; + +#include "meson-sm1-ac2xx.dtsi" +#include + +/ { + compatible = "amediatech,x96-air-gbit", "amlogic,sm1"; + model = "Shenzhen Amediatech Technology Co., Ltd X96 Air"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "X96-AIR"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; + + rx-internal-delay-ps = <800>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&ir { + linux,rc-map-name = "rc-x96max"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts new file mode 100644 index 000000000000..cd93d798f2a3 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt + */ + +/dts-v1/; + +#include "meson-sm1-ac2xx.dtsi" +#include + +/ { + compatible = "amediatech,x96-air", "amlogic,sm1"; + model = "Shenzhen Amediatech Technology Co., Ltd X96 Air"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "X96-AIR"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&ir { + linux,rc-map-name = "rc-beelink-gs1"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; -- cgit From 3dbabb9ac746ab01c71aa019c58a2e0cc6eafe1c Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Wed, 12 Jan 2022 02:27:08 +0000 Subject: dt-bindings: vendor-prefixes: add cyx prefix Shenzhen CYX Industrial Co., Ltd are a manufacturer of Android Set-Top Box devices. Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-5-christianshewitt@gmail.com --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 66d6432fd781..f1b4afb2876a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -279,6 +279,8 @@ patternProperties: description: CUI Devices "^cypress,.*": description: Cypress Semiconductor Corporation + "^cyx,.*": + description: Shenzhen CYX Industrial Co., Ltd "^cznic,.*": description: CZ.NIC, z.s.p.o. "^dallas,.*": -- cgit From bc7811bd4e884bbc21cc7b7031cb7c297662db9c Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Wed, 12 Jan 2022 02:27:09 +0000 Subject: dt-bindings: arm: amlogic: add A95XF3-AIR bindings Add board bindings for the CYX A95XF3-AIR set-top box which ships with model variants distinguished by Ethernet configuration: models using external Gigabit PHY have a -gbit suffix, while models using an internal 10/100 PHY have no suffix. Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-6-christianshewitt@gmail.com --- Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index b5b995941d3b..2027ce81a834 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -173,6 +173,8 @@ properties: - amediatech,x96-air - amediatech,x96-air-gbit - bananapi,bpi-m5 + - cyx,a95xf3-air + - cyx,a95xf3-air-gbit - hardkernel,odroid-c4 - hardkernel,odroid-hc4 - khadas,vim3l -- cgit From 8b749a0205bd41cafae37e878fd4a1b57b7b24f3 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Wed, 12 Jan 2022 02:27:10 +0000 Subject: arm64: dts: meson: add initial device-trees for A95XF3-AIR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The CYX A95XF3-AIR is based on Amlogic S905X3 reference board designs and ships in multiple configurations: – 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet – 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet – 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet ... - HDMI 2.1 video - S/PDIF optical output - AV output - 1x USB 2.0 OTG port - 1x USB 3.0 port - IR receiver - 1x micro SD card slot (internal) - 1x Reset/Update button (in AV jack) - 7-segment VFD - Multicolour case LED 'arc' The device-tree with -gbit suffix supports models with Gigabit Ethernet, and the device-tree with no suffix supports models with 10/100 Ethernet. Signed-off-by: Christian Hewitt Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-7-christianshewitt@gmail.com --- arch/arm64/boot/dts/amlogic/Makefile | 2 + .../boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 129 +++++++++++++++++++++ .../boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 108 +++++++++++++++++ 3 files changed, 239 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 1c0e554f54fc..e87adc6593df 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -51,6 +51,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts new file mode 100644 index 000000000000..d1debccdc1c2 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt + */ + +/dts-v1/; + +#include "meson-sm1-ac2xx.dtsi" +#include + +/ { + compatible = "cyx,a95xf3-air-gbit", "amlogic,sm1"; + model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "A95XF3-AIR"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; + + rx-internal-delay-ps = <800>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts new file mode 100644 index 000000000000..c94f2870b78b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt + */ + +/dts-v1/; + +#include "meson-sm1-ac2xx.dtsi" +#include + +/ { + compatible = "cyx,a95xf3-air", "amlogic,sm1"; + model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "A95XF3-AIR"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; -- cgit From bf510ace20ac153946d6d0ab6305dd8aa52eec6c Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Wed, 12 Jan 2022 02:27:11 +0000 Subject: dt-bindings: vendor-prefixes: add haochuangyi prefix Shenzhen Haochuangyi Technology Co.,Ltd are a manufacturer of Android Set-Top Box devices. Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-8-christianshewitt@gmail.com --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index f1b4afb2876a..52ff63248892 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -483,6 +483,8 @@ patternProperties: deprecated: true "^hannstar,.*": description: HannStar Display Corporation + "^haochuangyi,.*": + description: Shenzhen Haochuangyi Technology Co.,Ltd "^haoyu,.*": description: Haoyu Microelectronic Co. Ltd. "^hardkernel,.*": -- cgit From 2ca889b1201625d36efcd51d25371d937a6a0b8f Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Wed, 12 Jan 2022 02:27:12 +0000 Subject: dt-bindings: arm: amlogic: add H96-Max bindings Add the board binding for the Haochuangyi H96-Max STB device. Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-9-christianshewitt@gmail.com --- Documentation/devicetree/bindings/arm/amlogic.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 2027ce81a834..a073a959232c 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -177,6 +177,7 @@ properties: - cyx,a95xf3-air-gbit - hardkernel,odroid-c4 - hardkernel,odroid-hc4 + - haochuangyi,h96-max - khadas,vim3l - seirobotics,sei610 - const: amlogic,sm1 -- cgit From ac7b4433714a37e2c4b61acc6ce9b4538175e836 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Wed, 12 Jan 2022 02:27:13 +0000 Subject: arm64: dts: meson: add initial device-tree for H96-Max The Haochuangyi H96-Max is based on the Amlogic S905X3 reference design with the following specs: - 4GB DDR4 RAM - 32/64/128GB eMMC - HDMI 2.1 video - S/PDIF optical output - AV output - 10/100/1000 Base-T Ethernet - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) - 1x USB 2.0 OTG port - 1x USB 3.0 port - IR receiver - 1x micro SD card slot (internal) - 1x Reset/Update button (in AV jack) - 7-segment VFD Signed-off-by: Christian Hewitt Tested-by: Benoit Masson Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-10-christianshewitt@gmail.com --- arch/arm64/boot/dts/amlogic/Makefile | 1 + arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts | 145 ++++++++++++++++++++++ 2 files changed, 146 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index e87adc6593df..868d74044072 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts new file mode 100644 index 000000000000..0f6660e68e72 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Copyright (c) 2020 Christian Hewitt + */ + +/dts-v1/; + +#include "meson-sm1-ac2xx.dtsi" +#include + +/ { + compatible = "haochuangyi,h96-max", "amlogic,sm1"; + model = "Shenzhen Haochuangyi Technology Co., Ltd H96 Max"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "H96-MAX"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; + + rx-internal-delay-ps = <800>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; -- cgit From ac4dfd0d1d350412c7e4958821a5d7e47edc5a73 Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Thu, 6 Jan 2022 19:22:14 +0800 Subject: arm64: dts: add support for S4 based Amlogic AQ222 Add basic support for the Amlogic S4 based Amlogic AQ222 board: which describe components as follows: CPU, GIC, IRQ, Timer, UART. It's capable of booting up into the serial console. Signed-off-by: Xianwei Zhao Signed-off-by: Neil Armstrong [narmstrong: fixed memory unit address warning] Link: https://lore.kernel.org/r/20220106112214.6987-1-xianwei.zhao@amlogic.com --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-s4-s805x2-aq222.dts | 30 +++++++ arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 99 ++++++++++++++++++++++ 3 files changed, 130 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4.dtsi diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 868d74044072..13f73ca700ef 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -62,3 +62,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts new file mode 100644 index 000000000000..8ffbcb2b1ac5 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "meson-s4.dtsi" + +/ { + model = "Amlogic Meson S4 AQ222 Development Board"; + compatible = "amlogic,aq222", "amlogic,s4"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_B; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + +}; + +&uart_B { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi new file mode 100644 index 000000000000..bf9ae1e1016b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + */ + +#include +#include + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35","arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35","arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35","arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35","arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@fff01000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xfff01000 0 0x1000>, + <0x0 0xfff02000 0 0x2000>, + <0x0 0xfff04000 0 0x2000>, + <0x0 0xfff06000 0 0x2000>; + interrupts = ; + }; + + apb4: apb4@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x480000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + + uart_B: serial@7a000 { + compatible = "amlogic,meson-s4-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x7a000 0x0 0x18>; + interrupts = ; + status = "disabled"; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + }; + }; +}; -- cgit From 073983233302641d080b524640cc99be696e802a Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 12 Jan 2022 22:16:41 +0100 Subject: arm64: dts: meson-g12-common: add more pwm_f options Add missing PWM_F pin muxing for GPIOA_11 and GPIOZ_12. Signed-off-by: Gary Bisson Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112211642.2248901-3-gary.bisson@boundarydevices.com --- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 517519e6e87f..c20b86923887 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -839,6 +839,22 @@ }; }; + pwm_f_z_pins: pwm-f-z { + mux { + groups = "pwm_f_z"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_f_a_pins: pwm-f-a { + mux { + groups = "pwm_f_a"; + function = "pwm_f"; + bias-disable; + }; + }; + pwm_f_x_pins: pwm-f-x { mux { groups = "pwm_f_x"; -- cgit From 2c420d79dae47f9fa3bb8ccb76eaba864c579721 Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 12 Jan 2022 22:16:42 +0100 Subject: arm64: dts: meson-g12-common: add uart_ao_b pins muxing - RX/TX signals can be mapped on 2 different pairs of pins so supporting both options - RTS/CTS signals however only have 1 option available Signed-off-by: Gary Bisson Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112211642.2248901-4-gary.bisson@boundarydevices.com --- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 27 +++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index c20b86923887..6d99c23261fb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -1897,6 +1897,33 @@ }; }; + uart_ao_b_2_3_pins: uart-ao-b-2-3 { + mux { + groups = "uart_ao_b_tx_2", + "uart_ao_b_rx_3"; + function = "uart_ao_b"; + bias-disable; + }; + }; + + uart_ao_b_8_9_pins: uart-ao-b-8-9 { + mux { + groups = "uart_ao_b_tx_8", + "uart_ao_b_rx_9"; + function = "uart_ao_b"; + bias-disable; + }; + }; + + uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts { + mux { + groups = "uart_ao_b_cts", + "uart_ao_b_rts"; + function = "uart_ao_b"; + bias-disable; + }; + }; + pwm_a_e_pins: pwm-a-e { mux { groups = "pwm_a_e"; -- cgit From 41654043226f517a8b37cab34f1eab5c6ef16947 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Fri, 11 Feb 2022 10:53:09 +0000 Subject: dt-bindings: vendor-prefixes: add osmc prefix Open Source Media Centre (Sam Nazarko Trading Ltd.) are a manufacturer of Linux Set-Top Box devices. Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220211105311.30320-2-christianshewitt@gmail.com --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 52ff63248892..b97fd8dfe601 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -882,6 +882,8 @@ patternProperties: description: Ortus Technology Co., Ltd. "^osddisplays,.*": description: OSD Displays + "^osmc,.*": + description: Sam Nazarko Trading Ltd. (Open Source Media Centre) "^ouya,.*": description: Ouya Inc. "^overkiz,.*": -- cgit From 3f7dbd336f360a76103153b85ce616b86d85c6cd Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Fri, 11 Feb 2022 10:53:10 +0000 Subject: dt-bindings: arm: amlogic: add Vero 4K+ bindings Add the board binding for the OSMC Vero 4K+ STB device Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220211105311.30320-3-christianshewitt@gmail.com --- Documentation/devicetree/bindings/arm/amlogic.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index a073a959232c..61a6cabb375b 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -108,6 +108,7 @@ properties: - amlogic,p230 - amlogic,p231 - libretech,aml-s905d-pc + - osmc,vero4k-plus - phicomm,n1 - smartlabs,sml5442tw - videostrong,gxl-kii-pro -- cgit From d926a4fe25338e120ab49547de9707dc6e5e5824 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Fri, 11 Feb 2022 10:53:11 +0000 Subject: arm64: dts: meson: add support for OSMC Vero 4K+ The OSMC Vero 4K+ device is based on the Amlogic S905D (P230) reference design with the following specifications: - 2GB DDR4 RAM - 16GB eMMC - HDMI 2.1 video - S/PDIF optical output - AV output - 10/100/1000 Ethernet - AP6255 Wireless (802.11 a/b/g/n/ac, BT 4.2) - 2x USB 2.0 ports (1x OTG) - IR receiver (internal) - IR extender port (external) - 1x micro SD card slot - 1x Power LED (red) - 1x Reset button (in AV jack) Signed-off-by: Christian Hewitt Tested-by: Chad Wagner Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220211105311.30320-4-christianshewitt@gmail.com --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/meson-gxl-s905d-vero4k-plus.dts | 117 +++++++++++++++++++++ 2 files changed, 118 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 13f73ca700ef..0eec18678311 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-sml5442tw.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-vero4k-plus.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts new file mode 100644 index 000000000000..4b0ff707e21b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Author: Christian Hewitt + */ + +/dts-v1/; + +#include "meson-gxl-s905d.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include +#include + +/ { + compatible = "osmc,vero4k-plus", "amlogic,s905d", "amlogic,meson-gxl"; + model = "OSMC Vero 4K Plus"; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + button@0 { + label = "power"; + linux,code = ; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-standby { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_LOW>; + default-state = "off"; + panic-indicator; + }; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; + + amlogic,tx-delay-ns = <0>; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + pinctrl-0 = <ð_phy_irq_pin>; + pinctrl-names = "default"; + + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl_periphs { + /* Ensure the phy irq pin is properly configured as input */ + eth_phy_irq_pin: eth-phy-irq { + mux { + groups = "GPIOZ_15"; + function = "gpio_periphs"; + bias-disable; + output-disable; + }; + }; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&usb { + dr_mode = "host"; +}; + +&usb2_phy0 { + /* HDMI_5V also supplies the USB VBUS */ + phy-supply = <&hdmi_5v>; +}; + +&usb2_phy0 { + /* HDMI_5V also supplies the USB VBUS */ + phy-supply = <&hdmi_5v>; +}; -- cgit