From d929b2b7464f95ec01e47f560b1e687482ba8929 Mon Sep 17 00:00:00 2001 From: Julien Panis Date: Mon, 21 Aug 2023 16:24:18 +0200 Subject: bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset() The am335x-evm started producing boot errors because of subtle timing changes: Unhandled fault: external abort on non-linefetch (0x1008) at 0xf03c1010 ... sysc_reset from sysc_probe+0xf60/0x1514 sysc_probe from platform_probe+0x5c/0xbc ... The fix consists in using the appropriate sleep function in sysc reset. For flexible sleeping, fsleep is recommended. Here, sysc delay parameter can take any value in [0 - 255] us range. As a result, fsleep() should be used, calling udelay() for a sysc delay lower than 10 us. Signed-off-by: Julien Panis Fixes: e709ed70d122 ("bus: ti-sysc: Fix missing reset delay handling") Message-ID: <20230821-fix-ti-sysc-reset-v1-1-5a0a5d8fae55@baylibre.com> Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index eb4e7bee1e20..cf09b6b88cf7 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -2150,8 +2150,7 @@ static int sysc_reset(struct sysc *ddata) } if (ddata->cfg.srst_udelay) - usleep_range(ddata->cfg.srst_udelay, - ddata->cfg.srst_udelay * 2); + fsleep(ddata->cfg.srst_udelay); if (ddata->post_reset_quirk) ddata->post_reset_quirk(ddata); -- cgit From 11729caa520950e17cd81bc43ffc477c46cf791e Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 6 Sep 2023 18:34:42 -0500 Subject: bus: ti-sysc: Fix missing AM35xx SoC matching Commit feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") created a list of SoC types searching for strings based on names and wildcards which associates the SoC to different families. The OMAP34xx and OMAP35xx are treated as SOC_3430 while OMAP36xx and OMAP37xx are treated as SOC_3630, but the AM35xx isn't listed. The AM35xx is mostly an OMAP3430, and a later commit a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") looks for the SOC type and behaves in a certain way if it's SOC_3430. This caused a regression on the AM3517 causing it to return two errors: ti-sysc: probe of 48318000.target-module failed with error -16 ti-sysc: probe of 49032000.target-module failed with error -16 Fix this by treating the creating SOC_AM35 and inserting it between the SOC_3430 and SOC_3630. If it is treaed the same way as the SOC_3430 when checking the status of sysc_check_active_timer, the error conditions will disappear. Fixes: a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") Signed-off-by: Adam Ford Message-ID: <20230906233442.270835-1-aford173@gmail.com> Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index cf09b6b88cf7..33e8d780b04b 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -38,6 +38,7 @@ enum sysc_soc { SOC_2420, SOC_2430, SOC_3430, + SOC_AM35, SOC_3630, SOC_4430, SOC_4460, @@ -1862,7 +1863,7 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata) dev_warn(ddata->dev, "%s: timed out %08x !+ %08x\n", __func__, val, irq_mask); - if (sysc_soc->soc == SOC_3430) { + if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35) { /* Clear DSS_SDI_CONTROL */ sysc_write(ddata, 0x44, 0); @@ -3024,6 +3025,7 @@ static void ti_sysc_idle(struct work_struct *work) static const struct soc_device_attribute sysc_soc_match[] = { SOC_FLAG("OMAP242*", SOC_2420), SOC_FLAG("OMAP243*", SOC_2430), + SOC_FLAG("AM35*", SOC_AM35), SOC_FLAG("OMAP3[45]*", SOC_3430), SOC_FLAG("OMAP3[67]*", SOC_3630), SOC_FLAG("OMAP443*", SOC_4430), @@ -3228,7 +3230,7 @@ static int sysc_check_active_timer(struct sysc *ddata) * can be dropped if we stop supporting old beagleboard revisions * A to B4 at some point. */ - if (sysc_soc->soc == SOC_3430) + if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35) error = -ENXIO; else error = -EBUSY; -- cgit From e5deb8f76e64d94ccef715e75ebafffd0c312d80 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 7 Sep 2023 08:53:28 +0300 Subject: bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up The uarts should be tagged with SYSC_QUIRK_SWSUP_SIDLE instead of SYSC_QUIRK_SWSUP_SIDLE_ACT. The difference is that SYSC_QUIRK_SWSUP_SIDLE is used to force idle target modules rather than block idle during usage. The SYSC_QUIRK_SWSUP_SIDLE_ACT should disable autoidle and wake-up when a target module is active, and configure autoidle and wake-up when a target module is inactive. We are missing configuring the target module on sysc_disable_module(), and missing toggling of the wake-up bit. Let's fix the issue to allow uart wake-up to work. Fixes: fb685f1c190e ("bus: ti-sysc: Handle swsup idle mode quirks") Tested-by: Dhruva Gole Tested-by: Kevin Hilman Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 33e8d780b04b..d57bc066dce6 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1098,6 +1098,11 @@ static int sysc_enable_module(struct device *dev) if (ddata->cfg.quirks & (SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_SIDLE_ACT)) { best_mode = SYSC_IDLE_NO; + + /* Clear WAKEUP */ + if (regbits->enwkup_shift >= 0 && + ddata->cfg.sysc_val & BIT(regbits->enwkup_shift)) + reg &= ~BIT(regbits->enwkup_shift); } else { best_mode = fls(ddata->cfg.sidlemodes) - 1; if (best_mode > SYSC_IDLE_MASK) { @@ -1225,6 +1230,13 @@ set_sidle: } } + if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_SIDLE_ACT) { + /* Set WAKEUP */ + if (regbits->enwkup_shift >= 0 && + ddata->cfg.sysc_val & BIT(regbits->enwkup_shift)) + reg |= BIT(regbits->enwkup_shift); + } + reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift); reg |= best_mode << regbits->sidle_shift; if (regbits->autoidle_shift >= 0 && @@ -1519,16 +1531,16 @@ struct sysc_revision_quirk { static const struct sysc_revision_quirk sysc_revision_quirks[] = { /* These drivers need to be fixed to not use pm_runtime_irq_safe() */ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), /* Uarts on omap4 and later */ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), /* Quirks that need to be set based on the module address */ SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff, -- cgit