| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch adds a gen_epilogue test to test a main prog
using a bpf_tail_call.
A non test_loader test is used. The tailcall target program,
"test_epilogue_subprog", needs to be used in a struct_ops map
before it can be loaded. Another struct_ops map is also needed
to host the actual "test_epilogue_tailcall" struct_ops program
that does the bpf_tail_call. The earlier test_loader patch
will attach all struct_ops maps but the bpf_testmod.c does
not support >1 attached struct_ops.
The earlier patch used the test_loader which has already covered
checking for the patched pro/epilogue instructions. This is done
by the __xlated tag.
This patch goes for the regular skel load and syscall test to do
the tailcall test that can also allow to directly pass the
the "struct st_ops_args *args" as ctx_in to the
SEC("syscall") program.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This test adds a new struct_ops "bpf_testmod_st_ops" in bpf_testmod.
The ops of the bpf_testmod_st_ops is triggered by new kfunc calls
"bpf_kfunc_st_ops_test_*logue". These new kfunc calls are
primarily used by the SEC("syscall") program. The test triggering
sequence is like:
SEC("syscall")
syscall_prologue(struct st_ops_args *args)
bpf_kfunc_st_op_test_prologue(args)
st_ops->test_prologue(args)
.gen_prologue adds 1000 to args->a
.gen_epilogue adds 10000 to args->a
.gen_epilogue will also set the r0 to 2 * args->a.
The .gen_prologue and .gen_epilogue of the bpf_testmod_st_ops
will test the prog->aux->attach_func_name to decide if
it needs to generate codes.
The main programs of the pro_epilogue.c will call a
new kfunc bpf_kfunc_st_ops_inc10 which does "args->a += 10".
It will also call a subprog() which does "args->a += 1".
This patch uses the test_loader infra to check the __xlated
instructions patched after gen_prologue and/or gen_epilogue.
The __xlated check is based on Eduard's example (Thanks!) in v1.
args->a is returned by the struct_ops prog (either the main prog
or the epilogue). Thus, the __retval of the SEC("syscall") prog
is checked. For example, when triggering the ops in the
'SEC("struct_ops/test_epilogue") int test_epilogue'
The expected args->a is +1 (subprog call) + 10 (kfunc call)
+ 10000 (.gen_epilogue) = 10011.
The expected return value is 2 * 10011 (.gen_epilogue).
Suggested-by: Eduard Zingerman <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
In test_loader based tests to bpf_map__attach_struct_ops()
before call to bpf_prog_test_run_opts() in order to trigger
bpf_struct_ops->reg() callbacks on kernel side.
This allows to use __retval macro for struct_ops tests.
Signed-off-by: Eduard Zingerman <[email protected]>
Signed-off-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When AVIC, and thus IPI virtualization on AMD, is enabled, the CPU will
virtualize ICR writes. Unfortunately, the CPU doesn't do a very good job,
as it fails to clear the BUSY bit and also allows writing ICR2[23:0],
despite them being "RESERVED MBZ". Account for the quirky behavior in
the xapic_state test to avoid failures in a configuration that likely has
no hope of ever being enabled in production.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Now that the BUSY bit mess is gone (for x2APIC), verify that the *guest*
can read back the ICR value that it wrote. Due to the divergent
behavior between AMD and Intel with respect to the backing storage of the
ICR in the vAPIC page, emulating a seemingly simple MSR write is quite
complex.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Actually test x2APIC ICR reserved bits instead of deliberately skipping
them. The behavior that is observed when IPI virtualization is enabled is
the architecturally correct behavior, KVM is the one who was wrong, i.e.
KVM was missing reserved bit checks.
Fixes: 4b88b1a518b3 ("KVM: selftests: Enhance handling WRMSR ICR register in x2APIC mode")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Don't test the ICR BUSY bit when x2APIC is enabled as AMD and Intel have
different behavior (AMD #GPs, Intel ignores), and the fact that the CPU
performs the reserved bit checks when IPI virtualization is enabled makes
it impossible for KVM to precisely emulate one or the other.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add helpers to allow and expect #GP on x2APIC MSRs, and opportunistically
have the existing helper spit out a more useful error message if an
unexpected exception occurs.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Now that selftests support printf() in the guest, report unexpected
exceptions via the regular assertion framework. Exceptions were special
cased purely to provide a better error message. Convert only x86 for now,
as it's low-hanging fruit (already formats the assertion in the guest),
and converting x86 will allow adding asserts in x86 library code without
needing to update multiple tests.
Once all other architectures are converted, this will allow moving the
reporting to common code, which will in turn allow adding asserts in
common library code, and will also allow removing UCALL_UNHANDLED.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Open code a version of vcpu_run() in the guest_printf test in anticipation
of adding UCALL_ABORT handling to _vcpu_run(). The guest_printf test
intentionally generates asserts to verify the output, and thus needs to
bypass common assert handling.
Open code a helper in the guest_printf test, as it's not expected that any
other test would want to skip _only_ the UCALL_ABORT handling.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
We add a selftest to check that the new feature added in
commit 05ea491641d3 ("tcp: add support for SO_PEEK_OFF socket option")
works correctly.
Reviewed-by: Jason Xing <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Tested-by: Stefano Brivio <[email protected]>
Signed-off-by: Jon Maloy <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Someone reported on GitHub that the YNL NIPA test is failing
when run locally. The test builds the tools, and it hits:
netdev.c:82:9: warning: ignoring return value of ‘scanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
82 | scanf("%d", &ifindex);
I can't repro this on my setups but error seems clear enough.
Link: https://github.com/linux-netdev/nipa/discussions/37
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Nicolas Dichtel <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When dropping a local kptr, any kptr stashed into it is supposed to be
freed through bpf_obj_free_fields->__bpf_obj_drop_impl recursively. Add a
test to make sure it happens.
The test first stashes a referenced kptr to "struct task" into a local
kptr and gets the reference count of the task. Then, it drops the local
kptr and reads the reference count of the task again. Since
bpf_obj_free_fields and __bpf_obj_drop_impl will go through the local kptr
recursively during bpf_obj_drop, the dtor of the stashed task kptr should
eventually be called. The second reference count should be one less than
the first one.
Signed-off-by: Amery Hung <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
With a file, to write data an offset needs to be known. Typically data
follows the event attributes in a file.
However, if processing a pipe the number of event attributes may not be
known.
It is convenient in that case to write the attributes after the data.
Expand perf_session__do_write_header() to allow this when the data
offset and size are known.
This approach may be useful for more than just taking a pipe file to
write into a data file, `perf inject --itrace` will reserve and
additional 8kb for attributes, which would be unnecessary if the
attributes were written after the data.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Buggy perf.data files can have the attributes and data
overlapping.
For example, when processing pipe data the attributes aren't known and
so file offset header calculations can consider them not present.
Later this can cause the attributes to overwrite the data. This can be
seen in:
$ perf record -o - true > a.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.059 MB - ]
$ perf inject -i a.data -o b.data
$ perf report --stats -i b.data
0x68 [0]: failed to process type: 510379 [Invalid argument]
Error:
failed to process sample
$
This change makes reading the corrupt file fail:
$ perf report --stats -i b.data
Perf file header corrupt: Attributes and data overlap
incompatible file format (rerun with -v to learn more)
$
Which is more informative.
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Some of the values are a little strange so add documentation to
resolve ambiguity.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
perf_session is a central data structure to the tool so let's comment
it. The auxtrace callbacks are never modified in session so constify.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now that we have overlapping trace IDs it's also useful to know what the
queue number is to be able to distinguish the source of the trace so
print it inline. Hide it behind the -v option because it might not be
obvious to users what the queue number is.
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Ganapatrao Kulkarni <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: James Clark <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
v0.1 HW_ID packets have a new field that describes which sink each CPU
writes to. Use the sink ID to link trace ID maps to each other so that
mappings are shared wherever the sink is shared.
Also update the error message to show that overlapping IDs aren't an
error in per-thread mode, just not supported. In the future we can
use the CPU ID from the AUX records, or watch for changing sink IDs on
HW_ID packets to use the correct decoders.
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Ganapatrao Kulkarni <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: James Clark <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This isn't a bug because Perf always masks with
CORESIGHT_TRACE_ID_VAL_MASK before using these values, but to avoid it
looking like it could be, make an effort to not save bad values.
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: James Clark <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Ganapatrao Kulkarni <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now that each queue has a unique set of trace ID mappings, use this
list to create the decoders. In unformatted mode just add a single
mapping so only one decoder is made.
Previously each queue would have a decoder created for each traced CPU
on the system but this won't work anymore because CPUs can have
overlapping trace IDs.
This also means that the CORESIGHT_TRACE_ID_UNUSED_FLAG isn't needed
any more. If mappings aren't added then decoders aren't created, rather
than needing a flag to suppress creation.
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Ganapatrao Kulkarni <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: James Clark <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The global list won't work for per-sink trace ID allocations, so put a
list in each queue where the IDs will be unique to that queue.
To keep the same behavior as before, for version 0 of the HW_ID packets,
copy all the HW_ID mappings into all queues.
This change doesn't effect the decoders, only trace ID lookups on the
Perf side. The decoders are still created with global mappings which
will be fixed in a later commit.
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Ganapatrao Kulkarni <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: James Clark <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/faraday/ftgmac100.c
4186c8d9e6af ("net: ftgmac100: Ensure tx descriptor updates are visible")
e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI")
https://lore.kernel.org/[email protected]
net/ipv4/tcp.c
bac76cf89816 ("tcp: fix forever orphan socket caused by tcp_abort")
edefba66d929 ("tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset")
https://lore.kernel.org/[email protected]
No adjacent changes.
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, wireless and netfilter.
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code"
* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
nfc: pn533: Add poll mod list filling check
mailmap: update entry for Sriram Yagnaraman
selftests: mptcp: join: check re-re-adding ID 0 signal
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: validate event numbers
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: pm: fix ID 0 endp usage after multiple re-creations
mptcp: pm: do not remove already closed subflows
selftests: mptcp: join: no extra msg if no counter
selftests: mptcp: join: check re-adding init endp with != id
mptcp: pm: reset MPC endp ID when re-added
mptcp: pm: skip connecting to already established sf
mptcp: pm: send ACK on an active subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: fix RM_ADDR ID for the initial subflow
mptcp: pm: reuse ID 0 after delete and re-add
net: busy-poll: use ktime_get_ns() instead of local_clock()
sctp: fix association labeling in the duplicate COOKIE-ECHO case
mptcp: pr_debug: add missing \n at the end
...
|
|
We do an ugly copying of options in bpf_object__open_skeleton() just to
be able to set object name from skeleton's recorded name (while still
allowing user to override it through opts->object_name).
This is not just ugly, but it also is broken due to memcpy() that
doesn't take into account potential skel_opts' and user-provided opts'
sizes differences due to backward and forward compatibility. This leads
to copying over extra bytes and then failing to validate options
properly. It could, technically, lead also to SIGSEGV, if we are unlucky.
So just get rid of that memory copy completely and instead pass
default object name into bpf_object_open() directly, simplifying all
this significantly. The rule now is that obj_name should be non-NULL for
bpf_object_open() when called with in-memory buffer, so validate that
explicitly as well.
We adopt bpf_object__open_mem() to this as well and generate default
name (based on buffer memory address and size) outside of bpf_object_open().
Fixes: d66562fba1ce ("libbpf: Add BPF object skeleton support")
Reported-by: Daniel Müller <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Daniel Müller <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Make cs_etm__setup_queue() setup a queue even if it's empty, and
pre-allocate queues based on the max CPU that was recorded. In per-CPU
mode aux queues are indexed based on CPU ID even if all CPUs aren't
recorded, sparse queue arrays aren't used.
This will allow HW_IDs to be saved even if no aux data was received in
that queue without having to call cs_etm__setup_queue() from two
different places.
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Ganapatrao Kulkarni <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: James Clark <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Both of these passes gather information about how to create the
decoders. AUX records determine formatted/unformatted, and the HW_IDs
determine the traceID/metadata mappings.
Therefore it makes sense to cache the information and wait until both
passes are over until creating the decoders, rather than creating them
at the first HW_ID found.
This will allow a simplification of the creation process where
cs_etm_queue->traceid_list will exclusively used to create the decoders,
rather than the current two methods depending on whether the trace is
formatted or not.
Previously the sample CPU from the AUX record was used to initialize
the decoder CPU, but actually sample CPU == AUX queue index in per-CPU
mode, so saving the sample CPU isn't required.
Similarly formatted/unformatted was used upfront to create the decoders,
but now it's cached until later.
Reviewed-by: Anshuman Khandual <[email protected]>
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: James Clark <[email protected]>
Signed-off-by: James Clark <[email protected]>
Tested-by: Ganapatrao Kulkarni <[email protected]>
Tested-by: Leo Yan <[email protected]>
Acked-by: Suzuki Poulouse <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
feature detection from working"
Ian pointed out that the libcap feature test is also used by bpftool, so
we can't remove it just because perf stopped using it, revert the
removal of the feature test.
Since both perf and libcap uses the fast path feature detection
(tools/build/feature/test-all.c), probably the best thing is to keep
libcap-devel when building perf even it not being used there.
This reverts commit 47b3b6435e4bfb61ae8ffc63a11bd3c310f69acf.
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Charlie Jenkins <[email protected]> says:
There have been a couple of reports that using the hint address to
restrict the address returned by mmap hint address has caused issues in
applications. A different solution for restricting addresses returned by
mmap is necessary to avoid breakages.
[Palmer: This also just wasn't doing the right thing in the first place,
as it didn't handle the sv39 cases we were trying to deal with.]
* b4-shazam-merge:
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The mmap behavior that restricts the addresses returned by mmap caused
unexpected behavior, so get rid of the test cases that check that
behavior.
Signed-off-by: Charlie Jenkins <[email protected]>
Fixes: 73d05262a2ca ("selftests: riscv: Generalize mm selftests")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
This test extends "delete re-add signal" to validate the previous
commit: when the 'signal' endpoint linked to the initial subflow (ID 0)
is re-added multiple times, it will re-send the ADD_ADDR with id 0. The
client should still be able to re-create this subflow, even if the
add_addr_accepted limit has been reached as this special address is not
considered as a new address.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support")
Cc: [email protected]
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This test extends "delete and re-add" and "delete re-add signal" to
validate the previous commit: the number of MPTCP events are checked to
make sure there are no duplicated or unexpected ones.
A new helper has been introduced to easily check these events. The
missing events have been added to the lib.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b911c97c7dc7 ("mptcp: add netlink event support")
Cc: [email protected]
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This test extends "delete and re-add" to validate the previous commit:
when the endpoint linked to the initial subflow (ID 0) is re-added
multiple times, it was no longer being used, because the internal linked
counters are not decremented for this special endpoint: it is not an
additional endpoint.
Here, the "del/add id 0" steps are done 3 times to unsure this case is
validated.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: [email protected]
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The checksum and fail counters might not be available. Then no need to
display an extra message with missing info.
While at it, fix the indentation around, which is wrong since the same
commit.
Fixes: 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
Cc: [email protected]
Reviewed-by: Geliang Tang <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID, but the kernel should still use the ID 0 if it corresponds
to the initial address.
This test validates this behaviour: the endpoint linked to the initial
subflow is removed, and re-added with a different ID.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: [email protected]
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Removing the endpoint linked to the initial subflow should trigger a
RM_ADDR for the right ID, and the removal of the subflow. That's what is
now being verified in the "delete and re-add" test.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: [email protected]
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add 4 tests for the new revoke ioctl, for read/write/ioctl and poll.
Reviewed-by: Peter Hutterer <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Largely inspired from hid_bpf.c for the fixture setup.
Create a couple of tests for hidraw:
- create a uhid device and check if the fixture is working properly
- inject one uhid event and read it through hidraw
These tests are not that useful for now, but will be once we start adding
the ioctl and BPFs to revoke the hidraw node.
Reviewed-by: Peter Hutterer <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
When adding new tests programs, we need the same mechanics to create
new virtual devices, and read from their matching hidraw node.
Extract the common part into its own header so we can easily add new
tests C-files.
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
The sctp selftest is very slow on debug kernels.
Reported-by: Jakub Kicinski <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Fixes: 4e97d521c2be ("selftests: netfilter: nft_queue.sh: sctp coverage")
Signed-off-by: Florian Westphal <[email protected]>
Acked-by: Pablo Neira Ayuso <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Broonie reports that the set_id_regs test is failing as of commit
5cb57a1aff75 ("KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is
presented to the guest"). The test does not anticipate the 'late' ID
register fixup where KVM clobbers the GIC field in absence of GICv3.
While the field technically has FTR_LOWER_SAFE behavior, fix the issue
by setting it to an exact value of 0, matching the effect of the 'late'
fixup.
Reported-by: Mark Brown <[email protected]>
Signed-off-by: Oliver Upton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marc Zyngier <[email protected]>
|
|
KF_ACQUIRE kfuncs argument
This patch adds test cases for zero offset (implicit cast) or non-zero
offset pointer as KF_ACQUIRE kfuncs argument. Currently KF_ACQUIRE
kfuncs should support passing in pointers like &sk->sk_write_queue
(non-zero offset) or &sk->__sk_common (zero offset) and not be rejected
by the verifier.
Signed-off-by: Juntong Deng <[email protected]>
Link: https://lore.kernel.org/r/AM6PR03MB5848CB6F0D4D9068669A905B99952@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
detection from working
I noticed that the fast path feature detection was failing:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
/usr/bin/ld: cannot find -lcap: No such file or directory
collect2: error: ld returned 1 exit status
$
The patch removing the dependency (Fixes tag below) didn't remove the
detection of libcap, and as the fast path feature detection (test-all.c)
had -lcap in its Makefile link list of libraries to link, it was failing
when libcap-devel is not available, fix it by removing those leftover
files.
Fixes: e25ebda78e230283 ("perf cap: Tidy up and improve capability testing")
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/Zs-gjOGFWtAvIZit@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
$ sudo ./perf test filtering -vv
96: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 2966908
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Failing bpf-filter test [Success]
Group bpf-filter test
Group bpf-filter test [Success]
Multiple bpf-filter test
Multiple bpf-filter test [Success]
Cgroup bpf-filter test
Cgroup bpf-filter test [Success]
---- end(0) ----
96: perf record sample filtering (by BPF) tests : Ok
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The new cgroup filter can take either of '==' or '!=' operator and a
pathname for the target cgroup.
$ perf record -a --all-cgroups -e cycles --filter 'cgroup == /abc/def' -- sleep 1
Users should have --all-cgroups option in the command line to enable
cgroup filtering. Technically it doesn't need to have the option as
it can get the current task's cgroup info directly from BPF. But I want
to follow the convention for the other sample info.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The flex and bison files need to be recompiled when one of these header
filters are changed.
* util/bpf-filter.h
* util/bpf_skel/sample-filter.h
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.
So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage. So it shouldn't access it
unconditionally.
I got a segfault, when I wanted to see cgroup profiles.
$ sudo perf record -a --all-cgroups --synth=cgroup true
$ sudo perf report -s cgroup
Program received signal SIGSEGV, Segmentation fault.
0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
48 return RC_CHK_ACCESS(map)->dso;
(gdb) bt
#0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
at util/hist.c:644
#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
at util/hist.c:1260
#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
machine=0x5555560388e8) at builtin-report.c:334
#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
at util/session.c:780
#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
file_path=0x555556038ff0 "perf.data") at util/session.c:1406
As you can see the entry->ms.map was NULL even if he->ms.map has a
value. This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same. I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).
Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Shellcheck versions < v0.7.2 can't follow this path so add the helper to
fix the following warning:
In tests/shell/trace_btf_enum.sh line 13:
. "$(dirname $0)"/lib/probe.sh
^--------------------------^ SC1090: Can't follow non-constant source.
Use a directive to specify location.
Fixes: d66763fed30f0bd8 ("perf test trace_btf_enum: Add regression test for the BTF augmentation of enums in 'perf trace'")
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Howard Chu <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The 'pmu' pointer in the auxtrace_record structure is not used after
support multiple AUX events, remove it.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use evsel__is_aux_event() to decide if an event is a AUX event, this is
a refactoring to replace comparing the PMU type.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|