| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add the jscvt feature check in the set of hwcap tests.
Due to the requirement of jscvt feature, a compiler configuration
of v8.3 or above is needed to support assembly. Therefore, hand
encode is used here instead.
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add the pmull feature check in the set of hwcap tests.
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add the AES feature check in the set of hwcap tests.
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add the SHA1 and related features check in the set of hwcap tests.
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
The arm64 BTI selftests are currently built in the source directory,
then the generated binaries are copied to the output directory.
This leaves the object files around in a potentially otherwise pristine
source tree, tainting it for out-of-tree kernel builds.
Prepend $(OUTPUT) to every reference to an object file in the Makefile,
and remove the extra handling and copying. This puts all generated files
under the output directory.
Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
If memcmp() does not return 0, "zeros" need to be freed to prevent memleak
Signed-off-by: Ding Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Our ABI opts to provide future proofing by defining a much larger
SVE_VQ_MAX than the architecture actually supports. Since we use
this define to control the size of our vector data buffers this results
in a lot of overhead when we initialise which can be a very noticable
problem in emulation, we fill buffers that are orders of magnitude
larger than we will ever actually use even with virtual platforms that
provide the full range of architecturally supported vector lengths.
Define and use the actual architecture maximum to mitigate this.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add the LSE and various features check in the set of hwcap tests.
As stated in the ARM manual, the LSE2 feature allows for atomic access
to unaligned memory. Therefore, for processors that only have the LSE
feature, we register .sigbus_fn to test their ability to perform
unaligned access.
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Some enhanced features, such as the LSE2 feature, do not result in
SILLILL if LSE2 is missing and LSE is present, but will generate a
SIGBUS exception when atomic access unaligned.
Therefore, we add test item to test this type of features.
Notice that testing for SIGBUS only makes sense after make sure that
the instruction does not cause a SIGILL signal.
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add macro definition functions DEF_SIGHANDLER_FUNC() and
DEF_INST_RAISE_SIG() helpers.
Furthermore, there is no need to modify the default SIGILL handling
function throughout the entire testing lifecycle in the main() function.
It is reasonable to narrow the scope to the context of the sig_fn
function only.
This is a pre-patch for the subsequent SIGBUS handler patch.
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add the CRC32 feature check in the set of hwcap tests.
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add the FP feature check in the set of hwcap tests.
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
The BTI test program started life as standalone programs outside the
kselftest suite so provided it's own compiler.h. Now that we have updated
the tools/include compiler.h to have all the definitions that we are using
and the arm64 selftsets pull in tools/includes let's drop our custom
version.
__unreachable() is named unreachable() there requiring an update in the
code.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
We had open coded the definition of OPTIMIZER_HIDE_VAR() as a fix but now
that we have the generic tools/include available and that has had a
definition of OPTIMIZER_HIDE_VAR() we can switch to the define.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Make the generic tools/include headers available to the arm64 selftests so
we can reduce some duplication.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
We don't have definitions of __always_unused or __noreturn in the tools
version of compiler.h, add them so we can use them in kselftests.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Port over the definition of OPTIMIZER_HIDE_VAR() so we can use it in
kselftests.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
When we collect a signal context with one of the SME modes enabled we will
have enabled that mode behind the compiler and libc's back so they may
issue some instructions not valid in streaming mode, causing spurious
failures.
For the code prior to issuing the BRK to trigger signal handling we need to
stay in streaming mode if we were already there since that's a part of the
signal context the caller is trying to collect. Unfortunately this code
includes a memset() which is likely to be heavily optimised and is likely
to use FP instructions incompatible with streaming mode. We can avoid this
happening by open coding the memset(), inserting a volatile assembly
statement to avoid the compiler recognising what's being done and doing
something in optimisation. This code is not performance critical so the
inefficiency should not be an issue.
After collecting the context we can simply exit streaming mode, avoiding
these issues. Use a full SMSTOP for safety to prevent any issues appearing
with ZA.
Reported-by: Will Deacon <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add the RCpc and various features check in the set of hwcap tests.
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
On a system with both SVE and SME when we change one of the VLs this should
not result in a change in the other VL. Add a check that this is in fact
the case to vec-syscfg.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-3-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <[email protected]>
|
|
We just fixed an issue where changing the SVE VL while SME was active could
result in us attempting to save the streaming mode SVE vectors without any
backing storage. Add a test case which provokes that issue, ideally we
should also verify that the contents of ZA are unaffected by any of what we
did.
Note that since we need to keep streaming mode enabled we can't use any
syscalls to trigger the issue, we have to sit in a loop in usersapce and
hope to be preempted. The chosen numbers trigger with defconfig on all the
virtual platforms for me, this won't be 100% on all systems but avoid an
overcomplicated test implementation.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-2-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A pile of fixes that have been gathered since the previous pull. Most
of changes are device-specific, and nothing looks too scary.
- A memory leak fix in ALSA sequencer code in 6.5-rc
- Many fixes for ASoC Qualcomm CODEC drivers, covering SoundWire
probe problems
- A series of ASoC AMD fixes
- A few fixes and cleanups of selftest stuff
- HD-audio codec fixes and quirks for Clevo, HP, Lenovo, Dell"
* tag 'sound-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits)
ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops
ALSA: hda/realtek: Fix generic fixup definition for cs35l41 amp
ALSA: hda/realtek: Enable Mute LED on HP Laptop 15s-eq2xxx
selftests: ALSA: Add test-pcmtest-driver to .gitignore
ALSA: hda/realtek: Add quirk for Clevo NS70AU
ASoC: fsl_sai: Disable bit clock with transmitter
ALSA: seq: Fix memory leak at error path in snd_seq_create_port()
ASoC: SOF: ipc3-dtrace: uninitialized data in dfsentry_trace_filter_write()
ASoC: cs42l51: fix driver to properly autoload with automatic module loading
MAINTAINERS: Redo addition of ssm3515 to APPLE SOUND
ASoC: rt5640: Fix the issue of speaker noise
ALSA: hda/realtek - remove 3k pull low procedure
selftests: ALSA: Fix fclose on an already fclosed file pointer
ALSA: pcmtest: Don't use static storage to track per device data
ALSA: pcmtest: Convert to platform remove callback returning void
ASoC: dt-bindings: audio-graph-card2: Drop incomplete example
ASoC: dt-bindings: Update maintainer email id
ASoC: amd: ps: Fix extraneous error messages
ASoC: fsl_sai: Revert "ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode"
ASoC: codecs: SND_SOC_WCD934X should select REGMAP_IRQ
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF, netfilter, bluetooth and CAN.
Current release - regressions:
- eth: r8169: multiple fixes for PCIe ASPM-related problems
- vrf: fix RCU lockdep splat in output path
Previous releases - regressions:
- gso: fall back to SW segmenting with GSO_UDP_L4 dodgy bit set
- dsa: mv88e6xxx: do a final check before timing out when polling
- nf_tables: fix sleep in atomic in nft_chain_validate
Previous releases - always broken:
- sched: fix undoing tcf_bind_filter() in multiple classifiers
- bpf, arm64: fix BTI type used for freplace attached functions
- can: gs_usb: fix time stamp counter initialization
- nft_set_pipapo: fix improper element removal (leading to UAF)
Misc:
- net: support STP on bridge in non-root netns, STP prevents packet
loops so not supporting it results in freezing systems of
unsuspecting users, and in turn very upset noises being made
- fix kdoc warnings
- annotate various bits of TCP state to prevent data races"
* tag 'net-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: phy: prevent stale pointer dereference in phy_init()
tcp: annotate data-races around fastopenq.max_qlen
tcp: annotate data-races around icsk->icsk_user_timeout
tcp: annotate data-races around tp->notsent_lowat
tcp: annotate data-races around rskq_defer_accept
tcp: annotate data-races around tp->linger2
tcp: annotate data-races around icsk->icsk_syn_retries
tcp: annotate data-races around tp->keepalive_probes
tcp: annotate data-races around tp->keepalive_intvl
tcp: annotate data-races around tp->keepalive_time
tcp: annotate data-races around tp->tsoffset
tcp: annotate data-races around tp->tcp_tx_delay
Bluetooth: MGMT: Use correct address for memcpy()
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Bluetooth: SCO: fix sco_conn related locking and validity issues
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
Bluetooth: coredump: fix building with coredump disabled
Bluetooth: ISO: fix iso_conn related locking and validity issues
Bluetooth: hci_event: call disconnect callback before deleting conn
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.5
A few more fixes for v6.5, just small driver specific ones.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2023-07-19
We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 3 files changed, 55 insertions(+), 10 deletions(-).
The main changes are:
1) Fix stack depth check in presence of async callbacks,
from Kumar Kartikeya Dwivedi.
2) Fix BTI type used for freplace attached functions,
from Alexander Duyck.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, arm64: Fix BTI type used for freplace attached functions
selftests/bpf: Add more tests for check_max_stack_depth bug
bpf: Repeat check_max_stack_depth for async callbacks
bpf: Fix subprog idx logic in check_max_stack_depth
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It was forgotten to add the new binary to .gitignore. Let's fix it.
Fixes: 10b98a4db11a ("selftests: ALSA: Add test for the 'pcmtest' driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
When looking at the TC selftest reports, I noticed one test was failing
because /proc/net/nf_conntrack was not available.
not ok 373 3992 - Add ct action triggering DNAT tuple conflict
Could not match regex pattern. Verify command output:
cat: /proc/net/nf_conntrack: No such file or directory
It is only available if NF_CONNTRACK_PROCFS kconfig is set. So the issue
can be fixed simply by adding it to the list of required kconfig.
Fixes: e46905641316 ("tc-testing: add test for ct DNAT tuple collision")
Cc: [email protected]
Link: https://lore.kernel.org/netdev/[email protected]/T/ [1]
Signed-off-by: Matthieu Baerts <[email protected]>
Tested-by: Zhengchao Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When looking for something else in LKFT reports [1], I noticed most of
the tests were skipped because the "teardown stage" did not complete
successfully.
Pedro found out this is due to the fact CONFIG_NF_FLOW_TABLE is required
but not listed in the 'config' file. Adding it to the list fixes the
issues on LKFT side. CONFIG_NET_ACT_CT is now set to 'm' in the final
kconfig.
Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone")
Cc: [email protected]
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1]
Link: https://lore.kernel.org/netdev/[email protected]/T/ [2]
Suggested-by: Pedro Tammela <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Tested-by: Zhengchao Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:
not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds
The timeout had been introduced 3 years ago, see the Fixes commit below.
This timeout is only in place when executing the selftests via the
kselftests runner scripts. I guess this is not what most TC devs are
using and nobody noticed the issue before.
The new timeout is set to 15 minutes as suggested by Pedro [2]. It looks
like it is plenty more time than what it takes in "normal" conditions.
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Cc: [email protected]
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1]
Link: https://lore.kernel.org/netdev/[email protected]/T/ [2]
Suggested-by: Pedro Tammela <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Reviewed-by: Zhengchao Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Another test which now exercies the path of the verifier where it will
explore call chains rooted at the async callback. Without the prior
fixes, this program loads successfully, which is incorrect.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Don't group events when computing metrics that require more than the
maximum number of simultaneously enabled events on AMD systems.
- Fix multi CU handling in 'perf probe', add a 'perf test' entry to
regress test it.
- Make the 'perf test task_exit' stop generating samples by using the
'dummy' event, all it is testing is if a PERF_RECORD_EXIT is
generated at the end of a perf session. This makes this perf test to
stop sometimes failing on some systems due to a full ring buffer.
- Avoid SEGV if PMU lookup fails for legacy cache terms.
- Fix libsubcmd SEGV/use-after-free when commands aren't excluded.
- Fix OpenCSD (ARM64's CoreSight hardware tracing) library path
resolution when specifying CSLIBS= in the make command line.
- Fix broken feature check for libtracefs due to external lib changes,
use the provided pkgconfig file instead future proof it.
- Sync drm, fcntl, kvm, mount, prctl, socket, vhost, asound, arm64's
cputype headers with the kernel sources, in some cases this made the
tools become aware of new kernel APIs such as ioctls and the
cachestat sysctl.
* tag 'perf-tools-fixes-for-v6.5-1-2023-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf test task_exit: No need for a cycles event to check if we get an PERF_RECORD_EXIT
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools include UAPI: Sync the sound/asound.h copy with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
perf parse-events: Avoid SEGV if PMU lookup fails for legacy cache terms
libsubcmd: Avoid SEGV/use-after-free when commands aren't excluded
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf build: Fix broken feature check for libtracefs due to external lib changes
tools include UAPI: Sync linux/mount.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers uapi: Sync linux/fcntl.h with the kernel sources
perf vendor events amd: Fix large metrics
perf build: Fix library not found error when using CSLIBS
tools headers UAPI: Sync files changed by new cachestat syscall with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf probe: Read DWARF files from the correct CU
perf probe: Add test for regression introduced by switch to die_get_decl_file()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Seven hotfixes, six of which are cc:stable and one of which addresses
a post-6.5 issue"
* tag 'mm-hotfixes-stable-2023-07-18-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: fix node allocation testing on 32 bit
maple_tree: fix 32 bit mas_next testing
selftests/mm: mkdirty: fix incorrect position of #endif
maple_tree: set the node limit when creating a new root node
mm/mlock: fix vma iterator conversion of apply_vma_lock_flags()
prctl: move PR_GET_AUXV out of PR_MCE_KILL
selftests/mm: give scripts execute permission
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to bugs that are interfering with arm64 and risc workflows. Also
two fixes to timer and mincore tests that are causing test failures"
* tag 'linux-kselftest-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/arm64: fix build failure during the "emit_tests" step
selftests/riscv: fix potential build failure during the "emit_tests" step
tools: timers: fix freq average calculation
selftests/mincore: fix skip condition for check_huge_pages test
|
|
Internal node counting was altered and the 64 bit test was updated,
however the 32bit test was missed.
Restore the 32bit test to a functional state.
Link: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 541e06b772c1 ("maple_tree: remove GFP_ZERO from kmem_cache_alloc() and kmem_cache_alloc_bulk()")
Signed-off-by: Liam R. Howlett <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The #endif is the wrong side of a } causing a build failure when
__NR_userfaultfd is not defined. Fix this by moving the #end to enclose
the }
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 9eac40fc0cc7 ("selftests/mm: mkdirty: test behavior of (pte|pmd)_mkdirty on VMAs without write permissions")
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
PERF_RECORD_EXIT
The intent of this test is to check we get a PERF_RECORD_EXIT as asked
for by setting perf_event_attr.task=1.
When the test was written we didn't had the "dummy" event so we went
with the default event, "cycles".
There were reports of this test failing sometimes, one of these reports
was with a PREEMPT_RT_FULL, but I noticed it failing sometimes with an
aarch64 Firefly board.
In the kernel the call to perf_event_task_output(), that generates the
PERF_RECORD_EXIT may fail when there is not enough memory in the ring
buffer, if the ring buffer is paused, etc.
So switch to using the "dummy" event to use the ring buffer just for
what the test was designed for, avoiding uneeded PERF_RECORD_SAMPLEs.
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Mark copy_iovec_from_user() __noclone in order to prevent gcc from
doing an inter-procedural optimization and confuse objtool
- Initialize struct elf fully to avoid build failures
* tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iov_iter: Mark copy_iovec_from_user() noclone
objtool: initialize all of struct elf
|
|
The build failure reported in [1] occurred because commit <9fc96c7c19df>
("selftests: error out if kernel header files are not yet built") added
a new "kernel_header_files" dependency to "all", and that triggered
another, pre-existing problem. Specifically, the arm64 selftests
override the emit_tests target, and that override improperly declares
itself to depend upon the "all" target.
This is a problem because the "emit_tests" target in lib.mk was not
intended to be overridden. emit_tests is a very simple, sequential build
target that was originally invoked from the "install" target, which in
turn, depends upon "all".
That approach worked for years. But with 9fc96c7c19df in place,
emit_tests failed, because it does not set up all of the elaborate
things that "install" does. And that caused the new
"kernel_header_files" target (which depends upon $(KBUILD_OUTPUT) being
correct) to fail.
Some detail: The "all" target is .PHONY. Therefore, each target that
depends on "all" will cause it to be invoked again, and because
dependencies are managed quite loosely in the selftests Makefiles, many
things will run, even "all" is invoked several times in immediate
succession. So this is not a "real" failure, as far as build steps go:
everything gets built, but "all" reports a problem when invoked a second
time from a bad environment.
To fix this, simply remove the unnecessary "all" dependency from the
overridden emit_tests target. The dependency is still effectively
honored, because again, invocation is via "install", which also depends
upon "all".
An alternative approach would be to harden the emit_tests target so that
it can depend upon "all", but that's a lot more complicated and hard to
get right, and doesn't seem worth it, especially given that emit_tests
should probably not be overridden at all.
[1] https://lore.kernel.org/[email protected]
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Reported-by: Mark Brown <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Tested-by: Mark Brown <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The riscv selftests (which were modeled after the arm64 selftests) are
improperly declaring the "emit_tests" target to depend upon the "all"
target. This approach, when combined with commit 9fc96c7c19df
("selftests: error out if kernel header files are not yet built"), has
caused build failures [1] on arm64, and is likely to cause similar
failures for riscv.
To fix this, simply remove the unnecessary "all" dependency from the
emit_tests target. The dependency is still effectively honored, because
again, invocation is via "install", which also depends upon "all".
An alternative approach would be to harden the emit_tests target so that
it can depend upon "all", but that's a lot more complicated and hard to
get right, and doesn't seem worth it, especially given that emit_tests
should probably not be overridden at all.
[1] https://lore.kernel.org/[email protected]
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When run under run_vmtests.sh, test scripts were failing to run with
"permission denied" due to the scripts not being executable.
It is also annoying not to be able to directly invoke run_vmtests.sh,
which is solved by giving also it the execute permission.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryan Roberts <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Jérôme Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
To get the changes in:
e910baa9c1efdf76 ("KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations")
That makes this perf source code to be rebuilt:
CC /tmp/build/perf-tools/util/arm-spe.o
The changes in the above patch don't affect things that are used in
arm-spe.c (things like MIDR_NEOVERSE_N1, etc). Unsure if Apple M2 has
SPE (Statistical Profiling Extension) :-)
That addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Adrian Hunter <[email protected]>
Cc: Ali Saidi <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Picking the changes from:
01dfa8e969dbbc72 ("ALSA: ump: Add info flag bit for static blocks")
e375b8a045873cf5 ("ALSA: ump: Add more attributes to UMP EP and FB info")
30fc139260d46e9b ("ALSA: ump: Add ioctls to inquiry UMP EP and Block info via control API")
127ae6f6dad2edb2 ("ALSA: rawmidi: Skip UMP devices at SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE")
e3a8a5b726bdd903 ("ALSA: rawmidi: UMP support")
a4bb75c4f19db711 ("ALSA: uapi: pcm: control the filling of the silence samples for drain")
That harvests some new ioctls:
$ tools/perf/trace/beauty/sndrv_ctl_ioctl.sh > before.ctl
$ tools/perf/trace/beauty/sndrv_pcm_ioctl.sh > before.pcm
$ cp include/uapi/sound/asound.h tools/include/uapi/sound/asound.h
$ tools/perf/trace/beauty/sndrv_ctl_ioctl.sh > after.ctl
$ tools/perf/trace/beauty/sndrv_pcm_ioctl.sh > after.pcm
$ diff -u before.ctl after.ctl
--- before.ctl 2023-07-14 10:17:00.319591889 -0300
+++ after.ctl 2023-07-14 10:17:24.668248373 -0300
@@ -22,6 +22,9 @@
[0x40] = "RAWMIDI_NEXT_DEVICE",
[0x41] = "RAWMIDI_INFO",
[0x42] = "RAWMIDI_PREFER_SUBDEVICE",
+ [0x43] = "UMP_NEXT_DEVICE",
+ [0x44] = "UMP_ENDPOINT_INFO",
+ [0x45] = "UMP_BLOCK_INFO",
[0xd0] = "POWER",
[0xd1] = "POWER_STATE",
};
$ diff -u before.pcm after.pcm
$
Now those will be decoded when they appear, see a system wide 'perf
trace' session example here:
# perf trace -e ioctl --max-events=10
0.000 ( 0.010 ms): gnome-shell/2240 ioctl(fd: 9, cmd: DRM_MODE_RMFB, arg: 0x7ffc0041d54c) = 0
2.444 ( 0.005 ms): wireplumber/2304 ioctl(fd: 47, cmd: TIOCOUTQ, arg: 0x7f16e9afea24) = 0
2.452 ( 0.002 ms): wireplumber/2304 ioctl(fd: 47, cmd: TIOCOUTQ, arg: 0x7f16e9afea24) = 0
11.348 ( 0.010 ms): gnome-shell/2240 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffc0041ccf0) = 0
11.406 ( 0.037 ms): gnome-shel:cs0/2259 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f3cf69fdc60) = 0
11.476 ( 0.009 ms): gnome-shell/2240 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffc0041ce50) = 0
11.497 ( 0.019 ms): gnome-shell/2240 ioctl(fd: 9, cmd: DRM_MODE_ATOMIC, arg: 0x7ffc0041cdf0) = 0
12.481 ( 0.020 ms): firefox:cs0/3651 ioctl(fd: 40, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f1c365fea60) = 0
12.529 ( 0.009 ms): firefox:cs0/3651 ioctl(fd: 40, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f1c365feab0) = 0
12.624 ( 0.018 ms): firefox:cs0/3651 ioctl(fd: 40, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f1c365fea30) = 0
#
Silencing these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get the changes in:
228a27cf78afc63a ("vhost: Allow worker switching while work is queueing")
c1ecd8e950079774 ("vhost: allow userspace to create workers")
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2023-07-14 09:58:14.268249807 -0300
+++ after 2023-07-14 09:58:23.041493892 -0300
@@ -10,6 +10,7 @@
[0x12] = "SET_VRING_BASE",
[0x13] = "SET_VRING_ENDIAN",
[0x14] = "GET_VRING_ENDIAN",
+ [0x15] = "ATTACH_VRING_WORKER",
[0x20] = "SET_VRING_KICK",
[0x21] = "SET_VRING_CALL",
[0x22] = "SET_VRING_ERR",
@@ -31,10 +32,12 @@
[0x7C] = "VDPA_SET_GROUP_ASID",
[0x7D] = "VDPA_SUSPEND",
[0x7E] = "VDPA_RESUME",
+ [0x9] = "FREE_WORKER",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
[0x12] = "GET_VRING_BASE",
+ [0x16] = "GET_VRING_WORKER",
[0x26] = "GET_BACKEND_FEATURES",
[0x70] = "VDPA_GET_DEVICE_ID",
[0x71] = "VDPA_GET_STATUS",
@@ -44,6 +47,7 @@
[0x79] = "VDPA_GET_CONFIG_SIZE",
[0x7A] = "VDPA_GET_AS_NUM",
[0x7B] = "VDPA_GET_VRING_GROUP",
+ [0x8] = "NEW_WORKER",
[0x80] = "VDPA_GET_VQS_COUNT",
[0x81] = "VDPA_GET_GROUP_NUM",
};
$
For instance, see how those 'cmd' ioctl arguments get translated, now
ATTACH_VRING_WORKER, GET_VRING_WORKER and NEW_WORKER, will be as well:
# perf trace -a -e ioctl --max-events=10
0.000 ( 0.011 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
21.353 ( 0.014 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
25.766 ( 0.014 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
25.845 ( 0.034 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
25.916 ( 0.011 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
25.941 ( 0.025 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ATOMIC, arg: 0x7ffe4a22c840) = 0
32.915 ( 0.009 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_RMFB, arg: 0x7ffe4a22cf9c) = 0
42.522 ( 0.013 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
42.579 ( 0.031 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
42.644 ( 0.010 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
#
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/ZLFJ%[email protected]/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
b848b26c6672c9b9 ("net: Kill MSG_SENDPAGE_NOTLAST")
5e2ff6704a275be0 ("scm: add SO_PASSPIDFD and SCM_PIDFD")
4fe38acdac8a71f7 ("net: Block MSG_SENDPAGE_* from being passed to sendmsg() by userspace")
b841b901c452d926 ("net: Declare MSG_SPLICE_PAGES internal sendmsg() flag")
That don't result in any changes in the tables generated from that
header.
But while updating I noticed we were not handling MSG_BATCH and MSG_ZEROCOPY in the
hard coded table for the msg flags table, add them.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Mikhalitsyn <[email protected]>
Cc: David Howells <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, wireless and ebpf.
Current release - regressions:
- netfilter: conntrack: gre: don't set assured flag for clash entries
- wifi: iwlwifi: remove 'use_tfh' config to fix crash
Previous releases - regressions:
- ipv6: fix a potential refcount underflow for idev
- icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in
icmp6_dev()
- bpf: fix max stack depth check for async callbacks
- eth: mlx5e:
- check for NOT_READY flag state after locking
- fix page_pool page fragment tracking for XDP
- eth: igc:
- fix tx hang issue when QBV gate is closed
- fix corner cases for TSN offload
- eth: octeontx2-af: Move validation of ptp pointer before its usage
- eth: ena: fix shift-out-of-bounds in exponential backoff
Previous releases - always broken:
- core: prevent skb corruption on frag list segmentation
- sched:
- cls_fw: fix improper refcount update leads to use-after-free
- sch_qfq: account for stab overhead in qfq_enqueue
- netfilter:
- report use refcount overflow
- prevent OOB access in nft_byteorder_eval
- wifi: mt7921e: fix init command fail with enabled device
- eth: ocelot: fix oversize frame dropping for preemptible TCs
- eth: fec: recycle pages for transmitted XDP frames"
* tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
selftests: tc-testing: add test for qfq with stab overhead
net/sched: sch_qfq: account for stab overhead in qfq_enqueue
selftests: tc-testing: add tests for qfq mtu sanity check
net/sched: sch_qfq: reintroduce lmax bound check for MTU
wifi: cfg80211: fix receiving mesh packets without RFC1042 header
wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()
net: txgbe: fix eeprom calculation error
net/sched: make psched_mtu() RTNL-less safe
net: ena: fix shift-out-of-bounds in exponential backoff
netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
net/sched: flower: Ensure both minimum and maximum ports are specified
MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER
docs: netdev: update the URL of the status page
wifi: iwlwifi: remove 'use_tfh' config to fix crash
xdp: use trusted arguments in XDP hints kfuncs
bpf: cpumap: Fix memory leak in cpu_map_update_elem
wifi: airo: avoid uninitialized warning in airo_get_rate()
octeontx2-pf: Add additional check for MCAM rules
net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
net: fec: use netdev_err_once() instead of netdev_err()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix some missing-prototype warnings
- Fix user events struct args (did not include size of struct)
When creating a user event, the "struct" keyword is to denote that
the size of the field will be passed in. But the parsing failed to
handle this case.
- Add selftest to struct sizes for user events
- Fix sample code for direct trampolines.
The sample code for direct trampolines attached to handle_mm_fault().
But the prototype changed and the direct trampoline sample code was
not updated. Direct trampolines needs to have the arguments correct
otherwise it can fail or crash the system.
- Remove unused ftrace_regs_caller_ret() prototype.
- Quiet false positive of FORTIFY_SOURCE
Due to backward compatibility, the structure used to save stack
traces in the kernel had a fixed size of 8. This structure is
exported to user space via the tracing format file. A change was made
to allow more than 8 functions to be recorded, and user space now
uses the size field to know how many functions are actually in the
stack.
But the structure still has size of 8 (even though it points into the
ring buffer that has the required amount allocated to hold a full
stack.
This was fine until the fortifier noticed that the
memcpy(&entry->caller, stack, size) was greater than the 8 functions
and would complain at runtime about it.
Hide this by using a pointer to the stack location on the ring buffer
instead of using the address of the entry structure caller field.
- Fix a deadloop in reading trace_pipe that was caused by a mismatch
between ring_buffer_empty() returning false which then asked to read
the data, but the read code uses rb_num_of_entries() that returned
zero, and causing a infinite "retry".
- Fix a warning caused by not using all pages allocated to store ftrace
functions, where this can happen if the linker inserts a bunch of
"NULL" entries, causing the accounting of how many pages needed to be
off.
- Fix histogram synthetic event crashing when the start event is
removed and the end event is still using a variable from it
- Fix memory leak in freeing iter->temp in tracing_release_pipe()
* tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak of iter->temp when reading trace_pipe
tracing/histograms: Add histograms to hist_vars if they have referenced variables
tracing: Stop FORTIFY_SOURCE complaining about stack trace caller
ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
ring-buffer: Fix deadloop issue on reading trace_pipe
tracing: arm64: Avoid missing-prototype warnings
selftests/user_events: Test struct size match cases
tracing/user_events: Fix struct arg size match check
x86/ftrace: Remove unsued extern declaration ftrace_regs_caller_ret()
arm64: ftrace: Add direct call trampoline samples support
samples: ftrace: Save required argument registers in sample trampolines
|
|
Delete a duplicate assignment from this function implementation.
The note means ppm is average of the two actual freq samples.
But ppm have a duplicate assignment.
Signed-off-by: Minjie Du <[email protected]>
Acked-by: John Stultz <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The check_huge_pages test was failing instead of skipping on qemu-armv7
because the skip condition wasn't handled properly. Add an additional
check to fix it.
Signed-off-by: Ricardo Cañuelo <[email protected]>
Reported-by: Naresh Kamboju <[email protected]>
Reported-by: Linux Kernel Functional Testing <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Tested-by: Anders Roxell <[email protected]>
Closes: https://lore.kernel.org/all/CA+G9fYuoB8Ug8PcTU-YGmemL7_eeEksXFihvxWF6OikD7sK7pA@mail.gmail.com
Signed-off-by: Shuah Khan <[email protected]>
|
|
A packet with stab overhead greater than QFQ_MAX_LMAX should be dropped
by the QFQ qdisc as it can't handle such lengths.
Signed-off-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Pedro Tammela <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Zhengchao Shao <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
QFQ only supports a certain bound of MTU size so make sure
we check for this requirement in the tests.
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Pedro Tammela <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Zhengchao Shao <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|