| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the cpupower utility and get rid of a spurious
warning message printed to the kernel log by the ACPI cpufreq driver
after recent changes.
Specifics:
- Get rid of a warning message printed by the ACPI cpufreq driver
after recent changes in it when anohter CPU performance scaling
driver is registered already when it starts (Petr Pavlu)
- Make cpupower read TSC on each CPU right before reading MPERF so as
to reduce the potential time difference between the TSC and MPERF
accesses and improve the C0 percentage calculation (Wyes Karny)
- Fix a possible file handle leak and clean up the code in the
sysfs_get_enabled() function in cpupower (Hao Zeng)"
* tag 'pm-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Prevent a warning when another frequency driver is loaded
cpupower: Make TSC read per CPU for Mperf monitor
cpupower:Fix resource leaks in sysfs_get_enabled()
|
|
The target_btf_id can help us understand which kernel function is
linked by a tracing prog. The target_btf_id and target_obj_id have
already been exposed to userspace, so we just need to show them.
The result as follows,
$ tools/bpf/bpftool/bpftool link show
2: tracing prog 13
prog_type tracing attach_type trace_fentry
target_obj_id 1 target_btf_id 13964
pids trace(10673)
$ tools/bpf/bpftool/bpftool link show -j
[{"id":2,"type":"tracing","prog_id":13,"prog_type":"tracing","attach_type":"trace_fentry","target_obj_id":1,"target_btf_id":13964,"pids":[{"pid":10673,"comm":"trace"}]}]
Signed-off-by: Yafang Shao <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The __NR_execve definition for i386 was deleted by mistake
in the commit ece7f7c0507c ("perf bench syscall: Add fork
syscall benchmark"), add it to fix the build error on i386.
Fixes: ece7f7c0507cc147 ("perf bench syscall: Add fork syscall benchmark")
Reported-by: Linux Kernel Functional Testing <[email protected]>
Signed-off-by: Tiezhu Yang <[email protected]>
Tested-by: Naresh Kamboju <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tiezhu Yang <[email protected]>
Cc: [email protected]
Closes: https://lore.kernel.org/all/CA+G9fYvgBR1iB0CorM8OC4AM_w_tFzyQKHc+rF6qPzJL=TbfDQ@mail.gmail.com/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility fixes for 6.4-rc3 from Shuah Khan:
"This cpupower fixes update for Linux 67.4-rc3 consists of:
- a resource leak fix
- fix drift in C0 percentage calculation due to System-wide TSC read.
To lower this drift read TSC per CPU and also just after mperf read.
This technique improves C0 percentage calculation in Mperf monitor"
* tag 'linux-cpupower-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Make TSC read per CPU for Mperf monitor
cpupower:Fix resource leaks in sysfs_get_enabled()
|
|
Address the warning:
```
tests/attr.py:155: DeprecationWarning: The SafeConfigParser class has
been renamed to ConfigParser in Python 3.2. This alias will be
removed in Python 3.12. Use ConfigParser directly instead.
parser = configparser.SafeConfigParser()
```
by removing the word 'Safe'.
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Previously hard coded events/metrics were used, update for the use of
the TopdownL1 json metric group.
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Fixes: 94b1a603fca78388 ("perf stat: Add TopdownL1 metric as a default if present")
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In the end of the test, there will be an error message induced by the
`ip netns del ns1` command in cleanup()
Tests passed: 201
Tests failed: 0
Cannot remove namespace file "/run/netns/ns1": No such file or directory
This can even be reproduced with just `./fib_tests.sh -h` as we're
calling cleanup() on exit.
Redirect the error message to /dev/null to mute it.
V2: Update commit message and fixes tag.
V3: resubmit due to missing netdev ML in V2
Fixes: b60417a9f2b8 ("selftest: fib_tests: Always cleanup before exit")
Signed-off-by: Po-Hsu Lin <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If a test case fails, the mptcp_join.sh script can dump the
netns MIBs multiple times, leading to confusing output.
Let's dump such info only once per test-case, when needed.
This additionally allow removing some code duplication.
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Instead of duplicating the all existing TX check with
the TX side, add the new ones on selected test cases.
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently we don't track explicitly a few events related to address
management suboption handling; this patch adds new mibs for ADD_ADDR
and RM_ADDR options tx and for missed tx events due to internal storage
exhaustion.
The self-tests must be updated to properly handle different mibs with
the same/shared prefix.
Additionally removes a couple of warning tracking the loss event.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/378
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Move cxl_await_media_ready() to cxl_pci probe before driver starts issuing
IDENTIFY and retrieving memory device information to ensure that the
device is ready to provide the information. Allow cxl_pci_probe() to succeed
even if media is not ready. Cache the media failure in cxlds and don't ask
the device for any media information.
The rationale for proceeding in the !media_ready case is to allow for
mailbox operations to interrogate and/or remediate the device. After
media is repaired then rebinding the cxl_pci driver is expected to
restart the capacity scan.
Suggested-by: Dan Williams <[email protected]>
Fixes: b39cb1052a5c ("cxl/mem: Register CXL memX devices")
Reviewed-by: Ira Weiny <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/168445310026.3251520.8124296540679268206.stgit@djiang5-mobl3
[djbw: fixup cxl_test]
Signed-off-by: Dan Williams <[email protected]>
|
|
Conflicts:
drivers/net/ethernet/freescale/fec_main.c
6ead9c98cafc ("net: fec: remove the xdp_return_frame when lack of tx BDs")
144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Derick noticed, when testing hot plug, that hot-add behaves nominally
after a removal. However, if the hot-add is done without a prior
removal, CXL.mem accesses fail. It turns out that the original
implementation of the port driver and region programming wrongly assumed
that platform-firmware always enables the host-bridge HDM decoder
capability. Add support turning on switch-level HDM decoders in the case
where platform-firmware has not.
The implementation is careful to only arrange for the enable to be
undone if the current instance of the driver was the one that did the
enable. This is to interoperate with platform-firmware that may expect
CXL.mem to remain active after the driver is shutdown. This comes at the
cost of potentially not shutting down the enable on kexec flows, but it
is mitigated by the fact that the related HDM decoders still need to be
enabled on an individual basis.
Cc: <[email protected]>
Reported-by: Derick Marks <[email protected]>
Fixes: 54cdbf845cf7 ("cxl/port: Add a driver for 'struct cxl_port' objects")
Reviewed-by: Ira Weiny <[email protected]>
Link: https://lore.kernel.org/r/168437998331.403037.15719879757678389217.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, xfrm, bluetooth and netfilter.
Current release - regressions:
- ipv6: fix RCU splat in ipv6_route_seq_show()
- wifi: iwlwifi: disable RFI feature
Previous releases - regressions:
- tcp: fix possible sk_priority leak in tcp_v4_send_reset()
- tipc: do not update mtu if msg_max is too small in mtu negotiation
- netfilter: fix null deref on element insertion
- devlink: change per-devlink netdev notifier to static one
- phylink: fix ksettings_set() ethtool call
- wifi: mac80211: fortify the spinlock against deadlock by interrupt
- wifi: brcmfmac: check for probe() id argument being NULL
- eth: ice:
- fix undersized tx_flags variable
- fix ice VF reset during iavf initialization
- eth: hns3: fix sending pfc frames after reset issue
Previous releases - always broken:
- xfrm: release all offloaded policy memory
- nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment()
- vsock: avoid to close connected socket after the timeout
- dsa: rzn1-a5psw: enable management frames for CPU port
- eth: virtio_net: fix error unwinding of XDP initialization
- eth: tun: fix memory leak for detached NAPI queue.
Misc:
- MAINTAINERS: sctp: move Neil to CREDITS"
* tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
MAINTAINERS: skip CCing netdev for Bluetooth patches
mdio_bus: unhide mdio_bus_init prototype
bridge: always declare tunnel functions
atm: hide unused procfs functions
net: isa: include net/Space.h
Revert "ARM: dts: stm32: add CAN support on stm32f746"
netfilter: nft_set_rbtree: fix null deref on element insertion
netfilter: nf_tables: fix nft_trans type confusion
netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
net: wwan: t7xx: Ensure init is completed before system sleep
net: selftests: Fix optstring
net: pcs: xpcs: fix C73 AN not getting enabled
net: wwan: iosm: fix NULL pointer dereference when removing device
vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()
mailmap: add entries for Nikolay Aleksandrov
igb: fix bit_shift to be in [1..8] range
net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset
cassini: Fix a memory leak in the error handling path of cas_init_one()
tun: Fix memory leak for detached NAPI queue.
can: kvaser_pciefd: Disable interrupts in probe error path
...
|
|
Now that wq_worker_tick() is there, we can easily track the rough CPU time
consumption of each workqueue by charging the whole tick whenever a tick
hits an active workqueue. While not super accurate, it provides reasonable
visibility into the workqueues that consume a lot of CPU cycles.
wq_monitor.py is updated to report the per-workqueue CPU times.
v2: wq_monitor.py was using "cputime" as the key when outputting in json
format. Use "cpu_time" instead for consistency with other fields.
Signed-off-by: Tejun Heo <[email protected]>
|
|
If a per-cpu work item hogs the CPU, it can prevent other work items from
starting through concurrency management. A per-cpu workqueue which intends
to host such CPU-hogging work items can choose to not participate in
concurrency management by setting %WQ_CPU_INTENSIVE; however, this can be
error-prone and difficult to debug when missed.
This patch adds an automatic CPU usage based detection. If a
concurrency-managed work item consumes more CPU time than the threshold
(10ms by default) continuously without intervening sleeps, wq_worker_tick()
which is called from scheduler_tick() will detect the condition and
automatically mark it CPU_INTENSIVE.
The mechanism isn't foolproof:
* Detection depends on tick hitting the work item. Getting preempted at the
right timings may allow a violating work item to evade detection at least
temporarily.
* nohz_full CPUs may not be running ticks and thus can fail detection.
* Even when detection is working, the 10ms detection delays can add up if
many CPU-hogging work items are queued at the same time.
However, in vast majority of cases, this should be able to detect violations
reliably and provide reasonable protection with a small increase in code
complexity.
If some work items trigger this condition repeatedly, the bigger problem
likely is the CPU being saturated with such per-cpu work items and the
solution would be making them UNBOUND. The next patch will add a debug
mechanism to help spot such cases.
v4: Documentation for workqueue.cpu_intensive_thresh_us added to
kernel-parameters.txt.
v3: Switch to use wq_worker_tick() instead of hooking into preemptions as
suggested by Peter.
v2: Lai pointed out that wq_worker_stopping() also needs to be called from
preemption and rtlock paths and an earlier patch was updated
accordingly. This patch adds a comment describing the risk of infinte
recursions and how they're avoided.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Lai Jiangshan <[email protected]>
|
|
Currently, the only way to peer into workqueue operations is through
tracing. While possible, it isn't easy or convenient to monitor
per-workqueue behaviors over time this way. Let's add pwq->stats[] that
track relevant events and a drgn monitoring script -
tools/workqueue/wq_monitor.py.
It's arguable whether this needs to be configurable. However, it currently
only has several counters and the runtime overhead shouldn't be noticeable
given that they're on pwq's which are per-cpu on per-cpu workqueues and
per-numa-node on unbound ones. Let's keep it simple for the time being.
v2: Patch reordered to earlier with fewer fields. Field will be added back
gradually. Help message improved.
Signed-off-by: Tejun Heo <[email protected]>
Cc: Lai Jiangshan <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- sgx test fix for false negatives
- ftrace output is hard to parses and it masks inappropriate skips etc.
This fix addresses the problems by integrating with kselftest runner
* tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Improve integration with kselftest runner
selftests/sgx: Add "test_encl.elf" to TEST_FILES
|
|
Currently kernel kfunc bpf_dynptr_is_rdonly() has prototype ...
__bpf_kfunc bool bpf_dynptr_is_rdonly(struct bpf_dynptr_kern *ptr)
... while selftests bpf_kfuncs.h has:
extern int bpf_dynptr_is_rdonly(const struct bpf_dynptr *ptr) __ksym;
Such a mismatch might cause problems although currently it is okay in
selftests. Fix it to prevent future potential surprise.
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
With latest llvm17, dynptr/test_dynptr_is_null subtest failed in my testing
VM. The failure log looks like below:
All error logs:
tester_init:PASS:tester_log_buf 0 nsec
process_subtest:PASS:obj_open_mem 0 nsec
process_subtest:PASS:Can't alloc specs array 0 nsec
verify_success:PASS:dynptr_success__open 0 nsec
verify_success:PASS:bpf_object__find_program_by_name 0 nsec
verify_success:PASS:dynptr_success__load 0 nsec
verify_success:PASS:bpf_program__attach 0 nsec
verify_success:FAIL:err unexpected err: actual 4 != expected 0
#65/9 dynptr/test_dynptr_is_null:FAIL
The error happens for bpf prog test_dynptr_is_null in dynptr_success.c:
if (bpf_dynptr_is_null(&ptr2)) {
err = 4;
goto exit;
}
The bpf_dynptr_is_null(&ptr) unexpectedly returned a non-zero value and
the control went to the error path. Digging further, I found the root cause
is due to function signature difference between kernel and user space.
In kernel, we have ...
__bpf_kfunc bool bpf_dynptr_is_null(struct bpf_dynptr_kern *ptr)
... while in bpf_kfuncs.h we have:
extern int bpf_dynptr_is_null(const struct bpf_dynptr *ptr) __ksym;
The kernel bpf_dynptr_is_null disasm code:
ffffffff812f1a90 <bpf_dynptr_is_null>:
ffffffff812f1a90: f3 0f 1e fa endbr64
ffffffff812f1a94: 0f 1f 44 00 00 nopl (%rax,%rax)
ffffffff812f1a99: 53 pushq %rbx
ffffffff812f1a9a: 48 89 fb movq %rdi, %rbx
ffffffff812f1a9d: e8 ae 29 17 00 callq 0xffffffff81464450 <__asan_load8_noabort>
ffffffff812f1aa2: 48 83 3b 00 cmpq $0x0, (%rbx)
ffffffff812f1aa6: 0f 94 c0 sete %al
ffffffff812f1aa9: 5b popq %rbx
ffffffff812f1aaa: c3 retq
Note that only 1-byte register %al is set and the other 7-bytes are not
touched. In bpf program, the asm code for the above bpf_dynptr_is_null(&ptr2):
266: 85 10 00 00 ff ff ff ff call -0x1
267: b4 01 00 00 04 00 00 00 w1 = 0x4
268: 16 00 03 00 00 00 00 00 if w0 == 0x0 goto +0x3 <LBB9_8>
Basically, 4-byte subregister is tested. This might cause error as the value
other than the lowest byte might not be 0.
This patch fixed the issue by using the identical func prototype across kernel
and selftest user space. The fixed bpf asm code:
267: 85 10 00 00 ff ff ff ff call -0x1
268: 54 00 00 00 01 00 00 00 w0 &= 0x1
269: b4 01 00 00 04 00 00 00 w1 = 0x4
270: 16 00 03 00 00 00 00 00 if w0 == 0x0 goto +0x3 <LBB9_8>
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
To pick the changes from:
e0bddc19ba9578bc ("x86/mm: Reduce untagged_addr() overhead for systems without LAM")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Adrian Hunter <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in this cset:
a03c376ebaf38394 ("x86/arch_prctl: Add AMX feature numbers as ABI constants")
23e5d9ec2bab53c4 ("x86/mm/iommu/sva: Make LAM and SVA mutually exclusive")
2f8794bd087e7958 ("x86/mm: Provide arch_prctl() interface for LAM")
This picks these new prctls in a third range, that was also added to the
tools/perf/trace/beauty/arch_prctl.c beautifier.
$ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before
$ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h
$ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after
$ diff -u /tmp/before /tmp/after
@@ -20,3 +20,11 @@
[0x2003 - 0x2001]= "MAP_VDSO_64",
};
+#define x86_arch_prctl_codes_3_offset 0x4001
+static const char *x86_arch_prctl_codes_3[] = {
+ [0x4001 - 0x4001]= "GET_UNTAG_MASK",
+ [0x4002 - 0x4001]= "ENABLE_TAGGED_ADDR",
+ [0x4003 - 0x4001]= "GET_MAX_TAG_BITS",
+ [0x4004 - 0x4001]= "FORCE_TAGGED_SVA",
+};
+
$
With this 'perf trace' can translate those numbers into strings and use
the strings in filter expressions:
# perf trace -e prctl
0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5) = 0
0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580) = 0
5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0
5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0
24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0
24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0
670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0
670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0
^C#
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h'
diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h
Cc: Adrian Hunter <[email protected]>
Cc: Chang S. Bae <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently, when using prog loadall and the pin path is a bpffs mountpoint,
bpffs will be repeatedly mounted to the parent directory of the bpffs
mountpoint path. For example, a `bpftool prog loadall test.o /sys/fs/bpf`
will trigger this.
Signed-off-by: Pengcheng Yang <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The sign-file utility (from scripts/) is used in prog_tests/verify_pkcs7_sig.c,
but the utility should not be called as a test. Executing this utility produces
the following error:
selftests: /linux/tools/testing/selftests/bpf: urandom_read
ok 16 selftests: /linux/tools/testing/selftests/bpf: urandom_read
selftests: /linux/tools/testing/selftests/bpf: sign-file
not ok 17 selftests: /linux/tools/testing/selftests/bpf: sign-file # exit=2
Also, urandom_read is mistakenly used as a test. It does not lead to an error,
but should be moved over to TEST_GEN_FILES as well. The empty TEST_CUSTOM_PROGS
can then be removed.
Fixes: fc97590668ae ("selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfunc")
Signed-off-by: Alexey Gladkov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Roberto Sassu <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Link: https://lore.kernel.org/bpf/88e3ab23029d726a2703adcf6af8356f7a2d3483.1684316821.git.legion@kernel.org
|
|
This is to get the changes from:
68674f94ffc9dddc ("x86: don't use REP_GOOD or ERMS for small memory copies")
20f3337d350c4e1b ("x86: don't use REP_GOOD or ERMS for small memory clearing")
This also make the 'perf bench mem' files stop referring to the erms
versions that gone away with the above patches.
That addresses these perf tools build warning:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes from:
3d8f61bf8bcd69bc ("x86: KVM: Add common feature flag for AMD's PSFD")
3763bf58029f3459 ("x86/cpufeatures: Redefine synthetic virtual NMI bit as AMD's "real" vNMI")
6449dcb0cac73821 ("x86: CPUID and CR3/CR4 flags for Linear Address Masking")
be8de49bea505e77 ("x86/speculation: Identify processors vulnerable to SMT RSB predictions")
e7862eda309ecfcc ("x86/cpu: Support AMD Automatic IBRS")
faabfcb194a8d068 ("x86/cpu, kvm: Add the SMM_CTL MSR not present feature")
5b909d4ae59aedc7 ("x86/cpu, kvm: Add the Null Selector Clears Base feature")
84168ae786f8a15a ("x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf")
a9dc9ec5a1fafc3d ("x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature")
f8df91e73a6827a4 ("x86/cpufeatures: Add macros for Intel's new fast rep string features")
78335aac6156eada ("x86/cpufeatures: Add Bandwidth Monitoring Event Configuration feature flag")
f334f723a63cfc25 ("x86/cpufeatures: Add Slow Memory Bandwidth Allocation feature flag")
a018d2e3d4b1abc4 ("x86/cpufeatures: Add Architectural PerfMon Extension bit")
This causes these perf files to be rebuilt and brings some X86_FEATURE
that will be used when updating the copies of
tools/arch/x86/lib/mem{cpy,set}_64.S with the kernel sources:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Borislav Petkov (AMD) <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Jim Mattson <[email protected]>
Cc: Babu Moger <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Tom Lendacky <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The cited commit added a stray colon to the 'v' option. That makes the
option work incorrectly.
ex:
tools/testing/selftests/net# ./fib_nexthops.sh -v
(should enable verbose mode, instead it shows help text due to missing arg)
Fixes: 5feba4727395 ("selftests: fib_nexthops: Make ping timeout configurable")
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: Benjamin Poirier <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Modify the packet pacing algorithm so that it works with multi-buffer
packets. This algorithm makes sure we do not send too many buffers to
the receiving thread so that packets have to be dropped. The previous
algorithm made the assumption that each packet only consumes one
buffer, but that is not true anymore when multi-buffer support gets
added. Instead, we find out what the largest packet size is in the
packet stream and assume that each packet will consume this many
buffers. This is conservative and overly cautious as there might be
smaller packets in the stream that need fewer buffers per packet. But
it keeps the algorithm simple.
Also simplify it by removing the pthread conditional and just test if
there is enough space in the Rx thread before trying to send one more
batch. Also makes the tests run faster.
Signed-off-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add the ability to generate data in the packets that are correct for
multi-buffer packets. The ethernet header should only go into the
first fragment followed by data and the others should only have
data. We also need to modify the pkt_dump function so that it knows
what fragment has an ethernet header so it can print this.
Signed-off-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Populate the fill ring based on the number of frags a packet
needs. With multi-buffer support, a packet might require more than a
single fragment/buffer, so the function xsk_populate_fill_ring() needs
to consider how many buffers a packet will consume, and put that many
buffers on the fill ring for each packet it should receive. As we are
still not sending any multi-buffer packets, the function will only
produce one buffer per packet at the moment.
Signed-off-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Test for hugepages only once at the beginning of the execution of the
whole test suite, instead of before each test that needs huge
pages. These are the tests that use unaligned mode. As more unaligned
tests will be added, so the current system just does not scale.
With this change, there are now three possible outcomes of a test run:
fail, pass, or skip. To simplify the handling of this, the function
testapp_validate_traffic() now returns this value to the main loop. As
this function is used by nearly all tests, it meant a small change to
most of them.
Signed-off-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Store the offset in struct pkt instead of the address. This is
important since address is only meaningful in the context of a packet
that is stored in a single umem buffer and thus a single Tx
descriptor. If the packet, in contrast need to be represented by
multiple buffers in the umem, storing the address makes no sense since
the packet will consist of multiple buffers in the umem at various
addresses. This change is in preparation for the upcoming
multi-buffer support in AF_XDP and the corresponding tests.
So instead of indicating the address, we instead indicate the offset
of the packet in the first buffer. The actual address of the buffer is
allocated from the umem with a new function called
umem_alloc_buffer(). This also means we can get rid of the
use_fill_for_addr flag as the addresses fed into the fill ring will
always be the offset from the pkt specification in the packet stream
plus the address of the allocated buffer from the umem. No special
casing needed.
Signed-off-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Convert the current variable rx_pkt_nb to an iterator that can be used
for both Rx and Tx. This to simplify the code and making Tx more like
Rx that already has this feature.
Signed-off-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Dump the content of the packet when a test finds that packets are
received out of order, the length is wrong, or some other packet
error. Use the already existing pkt_dump function for this and call it
when the above errors are detected. Get rid of the command line option
for dumping packets as it is not useful to print out thousands of
good packets followed by the faulty one you would like to see.
Signed-off-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a varying payload pattern within the packet. Instead of having
just a packet number that is the same for all words in a packet, make
each word different in the packet. The upper 16-bits are set to the
packet number and the lower 16-bits are the sequence number of the
words in this packet. So the 3rd packet's 5th 32-bit word of data will
contain the number (2<<32) | 4 as they are numbered from 0.
This will make it easier to detect fragments that are out of order
when starting to test multi-buffer support.
The member payload in the packet is renamed pkt_nb to reflect that it
is now only a pkt_nb, not the real payload as seen above.
Signed-off-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Implement support for generating pkts with variable length. Before
this patch, they were all 64 bytes, exception for some packets of zero
length and some that were too large. This feature will be used to test
multi-buffer support for which large packets are needed.
The packets are also made simpler, just a valid Ethernet header
followed by a sequence number. This so that it will become easier to
implement packet generation when each packet consists of multiple
fragments. There is also a maintenance burden associated with carrying
all this code for generating proper UDP/IP packets, especially since
they are not needed.
Signed-off-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Do not change the XDP program for the Tx thread when not needed. It
was erroneously compared to the XDP program for the Rx thread, which
is always going to be different, which meant that the code made
unnecessary switches to the same program it had before. This did not
affect functionality, just performance.
Signed-off-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Moving kernel test kfuncs into bpf_testmod kernel module, and adding
necessary init calls and BTF IDs records.
We need to keep following structs in kernel:
struct prog_test_ref_kfunc
struct prog_test_member (embedded in prog_test_ref_kfunc)
The reason is because they need to be marked as rcu safe (check test
prog mark_ref_as_untrusted_or_null) and such objects are being required
to be defined only in kernel at the moment (see rcu_safe_kptr check
in kernel).
We need to keep also dtor functions for both objects in kernel:
bpf_kfunc_call_test_release
bpf_kfunc_call_memb_release
We also keep the copy of these struct in bpf_testmod_kfunc.h, because
other test functions use them. This is unfortunate, but this is just
temporary solution until we are able to these structs them to bpf_testmod
completely.
As suggested by David adding bpf_testmod.ko make dependency for
bpf programs, so they are rebuilt if we change the bpf_testmod.ko
module.
Also adding missing __bpf_kfunc to bpf_kfunc_call_test4 functions.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
There's no need to keep the extern in kfuncs declarations.
Suggested-by: David Vernet <[email protected]>
Acked-by: David Vernet <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Currently the test_verifier allows test to specify kfunc symbol
and search for it in the kernel BTF.
Adding the possibility to search for kfunc also in bpf_testmod
module when it's not found in kernel BTF.
To find bpf_testmod btf we need to get back SYS_ADMIN cap.
Acked-by: David Vernet <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Loading bpf_testmod kernel module for verifier test. We will
move all the tests kfuncs into bpf_testmod in following change.
Acked-by: David Vernet <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Now that we have un/load_bpf_testmod helpers in testing_helpers.h,
we can use it in other tests and save some lines.
Acked-by: David Vernet <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Do not unload bpf_testmod in load_bpf_testmod, instead call
unload_bpf_testmod separatelly.
This way we will be able use un/load_bpf_testmod functions
in other tests that un/load bpf_testmod module.
Acked-by: David Vernet <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
We are about to use un/load_bpf_testmod functions in couple tests
and it's better to print output to stdout, so it's aligned with
tests ASSERT macros output, which use stdout as well.
Acked-by: David Vernet <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Moving test_progs helpers to testing_helpers object so they can be
used from test_verifier in following changes.
Also adding missing ifndef header guard to testing_helpers.h header.
Using stderr instead of env.stderr because un/load_bpf_testmod helpers
will be used outside test_progs. Also at the point of calling them
in test_progs the std files are not hijacked yet and stderr is the
same as env.stderr.
Acked-by: David Vernet <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Move all kfunc exports into separate bpf_testmod_kfunc.h header file
and include it in tests that need it.
We will move all test kfuncs into bpf_testmod in following change,
so it's convenient to have declarations in single place.
The bpf_testmod_kfunc.h is included by both bpf_testmod and bpf
programs that use test kfuncs.
As suggested by David, the bpf_testmod_kfunc.h includes vmlinux.h
and bpf/bpf_helpers.h for bpf programs build, so the declarations
have proper __ksym attribute and we can resolve all the structs.
Note in kfunc_call_test_subprog.c we can no longer use the sk_state
define from bpf_tcp_helpers.h (because it clashed with vmlinux.h)
and we need to address __sk_common.skc_state field directly.
Acked-by: David Vernet <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When moving some of the test kfuncs to bpf_testmod I hit an issue
when some of the kfuncs that object uses are in module and some
in vmlinux.
The problem is that both vmlinux and module kfuncs get allocated
btf_fd_idx index into fd_array, but we store to it the BTF fd value
only for module's kfunc, not vmlinux's one because (it's zero).
Then after the program is loaded we check if fd_array[btf_fd_idx] != 0
and close the fd.
When the object has kfuncs from both vmlinux and module, the fd from
fd_array[btf_fd_idx] from previous load will be stored in there for
vmlinux's kfunc, so we close unrelated fd (of the program we just
loaded in my case).
Fixing this by storing zero to fd_array[btf_fd_idx] for vmlinux
kfuncs, so the we won't close stale fd.
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
llvm patch [1] enabled cross-function optimization for func arguments
(ArgumentPromotion) at -O2 level. And this caused s390 sock_fields
test failure ([2]). The failure is gone right now as patch [1] was
reverted in [3]. But it is possible that patch [3] will be reverted
again and then the test failure in [2] will show up again. So it is
desirable to fix the failure regardless.
The following is an analysis why sock_field test fails with
llvm patch [1].
The main problem is in
static __noinline bool sk_dst_port__load_word(struct bpf_sock *sk)
{
__u32 *word = (__u32 *)&sk->dst_port;
return word[0] == bpf_htons(0xcafe);
}
static __noinline bool sk_dst_port__load_half(struct bpf_sock *sk)
{
__u16 *half = (__u16 *)&sk->dst_port;
return half[0] == bpf_htons(0xcafe);
}
...
int read_sk_dst_port(struct __sk_buff *skb)
{
...
sk = skb->sk;
...
if (!sk_dst_port__load_word(sk))
RET_LOG();
if (!sk_dst_port__load_half(sk))
RET_LOG();
...
}
Through some cross-function optimization by ArgumentPromotion
optimization, the compiler does:
static __noinline bool sk_dst_port__load_word(__u32 word_val)
{
return word_val == bpf_htons(0xcafe);
}
static __noinline bool sk_dst_port__load_half(__u16 half_val)
{
return half_val == bpf_htons(0xcafe);
}
...
int read_sk_dst_port(struct __sk_buff *skb)
{
...
sk = skb->sk;
...
__u32 *word = (__u32 *)&sk->dst_port;
__u32 word_val = word[0];
...
if (!sk_dst_port__load_word(word_val))
RET_LOG();
__u16 half_val = word_val >> 16;
if (!sk_dst_port__load_half(half_val))
RET_LOG();
...
}
In current uapi bpf.h, we have
struct bpf_sock {
...
__be16 dst_port; /* network byte order */
__u16 :16; /* zero padding */
...
};
But the old kernel (e.g., 5.6) we have
struct bpf_sock {
...
__u32 dst_port; /* network byte order */
...
};
So for backward compatability reason, 4-byte load of
dst_port is converted to 2-byte load internally.
Specifically, 'word_val = word[0]' is replaced by 2-byte load
by the verifier and this caused the trouble for later
sk_dst_port__load_half() where half_val becomes 0.
Typical usr program won't have such a code pattern tiggering
the above bug, so let us fix the test failure with source
code change. Adding an empty asm volatile statement seems
enough to prevent undesired transformation.
[1] https://reviews.llvm.org/D148269
[2] https://lore.kernel.org/bpf/[email protected]/
[3] https://reviews.llvm.org/rG141be5c062ecf22bd287afffd310e8ac4711444a
Tested-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Change netcnt to demand at least 10K packets, as we frequently see some
stray packet arriving during the test in BPF CI. It seems more important
to make sure we haven't lost any packet than enforcing exact number of
packets.
Cc: Stanislav Fomichev <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-05-16
We've added 57 non-merge commits during the last 19 day(s) which contain
a total of 63 files changed, 3293 insertions(+), 690 deletions(-).
The main changes are:
1) Add precision propagation to verifier for subprogs and callbacks,
from Andrii Nakryiko.
2) Improve BPF's {g,s}setsockopt() handling with wrong option lengths,
from Stanislav Fomichev.
3) Utilize pahole v1.25 for the kernel's BTF generation to filter out
inconsistent function prototypes, from Alan Maguire.
4) Various dyn-pointer verifier improvements to relax restrictions,
from Daniel Rosenberg.
5) Add a new bpf_task_under_cgroup() kfunc for designated task,
from Feng Zhou.
6) Unblock tests for arm64 BPF CI after ftrace supporting direct call,
from Florent Revest.
7) Add XDP hint kfunc metadata for RX hash/timestamp for igc,
from Jesper Dangaard Brouer.
8) Add several new dyn-pointer kfuncs to ease their usability,
from Joanne Koong.
9) Add in-depth LRU internals description and dot function graph,
from Joe Stringer.
10) Fix KCSAN report on bpf_lru_list when accessing node->ref,
from Martin KaFai Lau.
11) Only dump unprivileged_bpf_disabled log warning upon write,
from Kui-Feng Lee.
12) Extend test_progs to directly passing allow/denylist file,
from Stephen Veiss.
13) Fix BPF trampoline memleak upon failure attaching to fentry,
from Yafang Shao.
14) Fix emitting struct bpf_tcp_sock type in vmlinux BTF,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (57 commits)
bpf: Fix memleak due to fentry attach failure
bpf: Remove bpf trampoline selector
bpf, arm64: Support struct arguments in the BPF trampoline
bpftool: JIT limited misreported as negative value on aarch64
bpf: fix calculation of subseq_idx during precision backtracking
bpf: Remove anonymous union in bpf_kfunc_call_arg_meta
bpf: Document EFAULT changes for sockopt
selftests/bpf: Correctly handle optlen > 4096
selftests/bpf: Update EFAULT {g,s}etsockopt selftests
bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen
libbpf: fix offsetof() and container_of() to work with CO-RE
bpf: Address KCSAN report on bpf_lru_list
bpf: Add --skip_encoding_btf_inconsistent_proto, --btf_gen_optimized to pahole flags for v1.25
selftests/bpf: Accept mem from dynptr in helper funcs
bpf: verifier: Accept dynptr mem as mem in helpers
selftests/bpf: Check overflow in optional buffer
selftests/bpf: Test allowing NULL buffer in dynptr slice
bpf: Allow NULL buffers in bpf_dynptr_slice(_rw)
selftests/bpf: Add testcase for bpf_task_under_cgroup
bpf: Add bpf_task_under_cgroup() kfunc
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|