| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The following commit:
3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection")
... improved objtool's ability to detect GCC switch statement jump
tables for GCC 6. However the check to allow short jumps with the
scanned range of instructions wasn't quite right. The pattern detection
should allow jumps to the indirect jump instruction itself.
This fixes the following warning:
drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x315: sibling call from callable instruction with changed frame pointer
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection")
Link: http://lkml.kernel.org/r/20161026153408.2rifnw7bvoc5sex7@treble
Signed-off-by: Ingo Molnar <[email protected]>
|
|
I'd like to see the name of tasks with perf sched map, but it only shows
name of new tasks and then use short names after all. This is not good
for long running tasks since it's hard for users to track the short
names. This patch makes it show the names (except the idle task) when
-v option is used. Probably we may make it as default behavior.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Applying cpu color always doesn't help readability IMHO. Instead it
might be better to applying the color when there's an activity on those
CPUs.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The -i and -v options can be used in subcommands so enable cascading the
sched_options. This fixes the following inconvenience in 'perf sched':
$ perf sched -i perf.data.sched map
... (it works well) ...
$ perf sched map -i perf.data.sched
Error: unknown switch `i'
Usage: perf sched map [<options>]
--color-cpus <cpus>
highlight given CPUs in map
--color-pids <pids>
highlight given pids in map
--compact map output in compact mode
--cpus <cpus> display given CPUs in map
With this patch, the second command line works with the perf.data.sched
data file.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Sometimes subcommand have common options and it can only handled in the
upper level command unless it duplicates the options.
This patch adds a parent field and fallback to the parent if the given
argument was not found in the current options.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf report/top on TUI supports horizontal scrolling using LEFT and
RIGHT keys.
But it calculate the number of columns incorrectly when hierarchy mode
is enabled so that keep pressing RIGHT key can make the output
disappeared.
In the hierarchy mode, all sort keys are collapsed into a single column,
so it needs to be applied when calculating column numbers.
Reported-and-Tested-by: Markus Trippelsdorf <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This gets rid of oddities such as:
perf bench futex hash -t -4
perf: calloc: Cannot allocate memory
Runtime (and many more) are equally busted, i.e. run for bogus amounts of
time. Just use the abs, instead of, for example errorring out.
Committer note:
After the patch:
$ perf bench futex hash -t -4
# Running 'futex/hash' benchmark:
Run summary [PID 10178]: 4 threads, each operating on 1024 [private] futexes for 10 secs.
[thread 0] futexes: 0x34f9fa0 ... 0x34faf9c [ 4702208 ops/sec ]
[thread 1] futexes: 0x34fb140 ... 0x34fc13c [ 4707020 ops/sec ]
[thread 2] futexes: 0x34fc2e0 ... 0x34fd2dc [ 4711526 ops/sec ]
[thread 3] futexes: 0x34fd480 ... 0x34fe47c [ 4709683 ops/sec ]
Averaged 4707609 operations/sec (+- 0.04%), total secs = 10
$
Signed-off-by: Davidlohr Bueso <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Sebastian noted that overhead for worker thread ops (throughput)
accounting was producing 'perf' to appear in the profiles, consuming a
non-trivial (i.e. 13%) amount of CPU.
This is due to cacheline bouncing due to the increment of w->ops.
We can easily fix this by just working on a local copy and updating the
actual worker once done running, and ready to show the program summary.
There is no danger of the worker being concurrent, so we can trust that
no stale value is being seen by another thread.
This also gets rid of the unnecessary cache alignment hack; its not
worth it.
Reported-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Davidlohr Bueso <[email protected]>
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Printing the full path of the selected link is obviously not needed,
hence removing.
Signed-off-by: Mathieu Poirier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Make the 'perf list' glob matching for vendor events case insensitive.
This allows to use the upper case vendor events with perf list too.
Now the following works:
% perf list LONGEST_LAT
...
cache:
longest_lat_cache.miss
[Core-originated cacheable demand requests missed LLC]
longest_lat_cache.reference
[Core-originated cacheable demand requests that refer to LLC]
Signed-off-by: Andi Kleen <[email protected]>
Suggested-by: Ingo Molnar <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Instead of the one when another syscall takes place while another is being
processed (in another CPU, but we show it serialized, so need to "interrupt"
the other), and also when finally showing the sys_enter + sys_exit + duration,
where we were showing the sample->time for the sys_exit, duh.
Before:
# perf trace sleep 1
<SNIP>
0.373 ( 0.001 ms): close(fd: 3 ) = 0
1000.626 (1000.211 ms): nanosleep(rqtp: 0x7ffd6ddddfb0) = 0
1000.653 ( 0.003 ms): close(fd: 1 ) = 0
1000.657 ( 0.002 ms): close(fd: 2 ) = 0
1000.667 ( 0.000 ms): exit_group( )
#
After:
# perf trace sleep 1
<SNIP>
0.336 ( 0.001 ms): close(fd: 3 ) = 0
0.373 (1000.086 ms): nanosleep(rqtp: 0x7ffe303e9550) = 0
1000.481 ( 0.002 ms): close(fd: 1 ) = 0
1000.485 ( 0.001 ms): close(fd: 2 ) = 0
1000.494 ( 0.000 ms): exit_group( )
[root@jouet linux]#
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Fixes: 752fde44fd1c ("perf trace: Support interrupted syscalls")
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Not used at all, we need just the entry_time to calculate the syscall
duration.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It popped up in perf testing that the worker consumes some amount of
CPU. It boils down to the increment of `ops` which causes cache line
bouncing between the individual threads.
This patch aligns the struct by 256 bytes to ensure that not a cache
line is shared among CPUs. 128 byte is the x86 worst case and grep says
that L1_CACHE_SHIFT is set to 8 on s390.
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We already have handling for errors when processing PERF_RECORD_ events,
so instead of calling die() when not being able to alloc, propagate the
error, so that the normal UI exit sequence can take place, the user be
warned and possibly the terminal be properly reset to a sane mode.
Cc: Adrian Hunter <[email protected]>
Cc: Brice Goglin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It already returns whatever strbuf_(grow|addch)() returns in case of
failure, so just return -ENOSPC in the only case where it was die()ing.
When it returns, its only caller will call die() anyway, so no need to
be so eager, die later.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Instead of having all tests perform alloc/free, do it in the code that
calls the do_cycles() and do_gettimeofday() functions.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Hitoshi Mitake <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In the perf wiki todo-list[1], there is an entry regarding initial-delay
and 'perf trace'; the following small patch tries to fulfill this point.
It has been generated against the branch tip/perf/core.
It has only been implemented in the "trace__run" case.
Ex.:
$ sudo strace -- ./perf trace --delay 5 sleep 1 2>&1
...
fcntl(7, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
ioctl(7, PERF_EVENT_IOC_ID, 0x7ffc8fd35718) = 0
ioctl(11, PERF_EVENT_IOC_SET_OUTPUT, 0x7) = 0
fcntl(11, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
ioctl(11, PERF_EVENT_IOC_ID, 0x7ffc8fd35718) = 0
write(6, "\0", 1) = 1
close(6) = 0
nanosleep({0, 5000000}, NULL) = 0 # DELAY OF 5 MS BEFORE ENABLING THE EVENTS
ioctl(3, PERF_EVENT_IOC_ENABLE, 0) = 0
ioctl(4, PERF_EVENT_IOC_ENABLE, 0) = 0
ioctl(5, PERF_EVENT_IOC_ENABLE, 0) = 0
ioctl(7, PERF_EVENT_IOC_ENABLE, 0) = 0
...
[1]: https://perf.wiki.kernel.org/index.php/Todo
Signed-off-by: Alexis Berlemont <[email protected]>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Add entry to the manpage, cut'n'pasted from stat's and record's ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Here is a small patch which tries to fulfill a point in the perf todo
list:
* Make pressing 'V' multiple times to go on cycling thru various
verbosity levels in 'perf top', so that info that is present in
'perf top -v' can be obtained without having to restart the tool
(acme).
After a small grep in the code, the max verbosity level seems 3; so,
we cycle at 4; I did not dare define a MAX_VERBOSE_LEVEL constant.
Signed-off-by: Alexis Berlemont <[email protected]>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The latter version occurs much more when running git grep.
Signed-off-by: Alexander Alemayhu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
With uncore event aliases which are duplicated over multiple PMUs the
"Using CPUID" message with -v could be printed many times. Only print
it once.
Signed-off-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch adds a formal specification of the jitdump format. The goal
is to help jit runtime developers implement the jitdump support without
having to read the jvmti code.
Signed-off-by: Stephane Eranian <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Check the version number when opening a jitdump file. Accept older
versions, but not newer ones.
Signed-off-by: Stefano Sanfilippo <[email protected]>
Signed-off-by: Ross McIlroy <[email protected]>
Reviewed-by: Stephane Eranian <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When the jit_buf_desc contains unwinding information, it is emitted as
eh_frame unwinding sections in the DSOs generated by perf inject.
The unwinding information is required to unwind of JITed code which do
not maintain the frame pointer register during function calls. It can
be emitted by V8 / Chromium when the --perf_prof_unwinding_info is
passed to V8.
The eh_frame and eh_frame_hdr sections are emitted immediately after the
.text.
The .eh_frame is aligned at a 8-byte boundary, and .eh_frame_hdr at a
4-byte one. Since size of the .eh_frame is required to be a multiple of
the word size, which means there will never be additional padding
between it and the .eh_frame_hdr on machines where the word size is 4 or
8 bytes.
However, additional padding might be inserted between .text and
.eh_frame to reach the correct alignment, which will always be 8 bytes,
also on 32bit machines. The reasoning behind this choice is that 4 extra
bytes of padding worst case are not a large cost for the advantage of
removing word-size dependent offset calculations when emitting the
jitdump.
Signed-off-by: Stefano Sanfilippo <[email protected]>
Signed-off-by: Ross McIlroy <[email protected]>
Reviewed-by: Stephane Eranian <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This record is intended to provide unwinding information in the
eh_frame format. This is required to unwind JITed code which
does not maintain the frame pointer register during function calls.
The eh_frame unwinding information can be emitted by V8 / Chromium
when the --perf_prof_unwinding_info is passed.
A record of type jr_code_unwinding_info comes before the jr_code_load
it referred to and contains both the .eh_frame and .eh_frame_hdr.
The fields in the header have the following meaning:
* unwinding_size: size of the eh_frame and eh_frame_hdr, necessary
for distinguishing the content from the padding.
* eh_frame_hdr_size: as the name says.
* mapped_size: size of the payload that was in memory at runtime.
typically unwinding_size if the .eh_frame_hdr and .eh_frame were
mapped, or 0 if they weren't. It should always be the former case,
since the .eh_frame is guaranteed to be mapped in memory. However,
certain JITs might want to inject an .eh_frame_hdr with an empty LUT
to trigger fp-based unwinding fallback in libunwind. The only part
of the .eh_frame_hdr that libunwind reads from remote memory is the
LUT, and since there is none, mapping the unwinding info in memory
is not necessary, and 0 in this field signifies that it wasn't.
This practical hack allows to save bytes in code memory for those
JIT compilers that might or might not maintain a valid frame pointer.
The payload that follows is assumed to contain first the .eh_frame and
then the .eh_header_hdr, with no padding between the two.
Signed-off-by: Stefano Sanfilippo <[email protected]>
Signed-off-by: Ross McIlroy <[email protected]>
Reviewed-by: Stephane Eranian <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When calculating .eh_frame_hdr base and LUT offsets do not always assume
that pgoff is zero.
The assumption is false for DSOs built from the jitdump by perf inject,
because the ELF header did not exist in memory at sampling time.
Signed-off-by: Stefano Sanfilippo <[email protected]>
Signed-off-by: Ross McIlroy <[email protected]>
Reviewed-by: Stephane Eranian <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The behavior before this commit was to skip the remaining portion of the
jitdump in case an unknown record was found, including those records
that perf could handle.
With this change, parsing a record with an unknown id will cause a
warning to be emitted, the record will be skipped and parsing will
resume from the next (valid) one.
The patch aims at making perf more future proof, by extracting as much
information as possible from jitdumps.
Signed-off-by: Stefano Sanfilippo <[email protected]>
Signed-off-by: Ross McIlroy <[email protected]>
Reviewed-by: Stephane Eranian <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch removes all the string padding generated in the jitdump file.
They are not necessary and were adding unnecessary complexity. Modern
processors can handle unaligned accesses quite well. The perf.data/
jitdump file are always post-processed, no need to add extra complexity
for no real gain.
Signed-off-by: Stephane Eranian <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch modifies the build dependencies on the jitdump support in
perf. As it stands jitdump was wrongfully made dependent 100% on using
DWARF. However, the dwarf dependency, only exist if generating the
source line table in genelf_debug.c. The rest of the support does not
need DWARF.
This patch removes the dependency on DWARF for the entire jitdump
support. It keeps it only for the genelf_debug.c support.
Signed-off-by: Maciej Debski <[email protected]>
Reviewed-by: Stephane Eranian <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Fixes: e12b202f8fb9 ("perf jitdump: Build only on supported archs")
[ Make it build only if NO_LIBELF isn't defined, as jitdump.o will only be built in that case ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch improves the usefulness of error messages generated by the
JVMTI interfac.e This can help identify the root cause of a problem by
printing the actual error code. The patch adds a new helper function
called print_error().
Signed-off-by: Stephane Eranian <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nilay Vaish <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Handle failure to convert numeric error to a string in print_error() ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Such as CentOS5, where such define is not present in elf.h.
This file, genelf.c, wasn't being built for several systems, because
it mistakenly was conditional on some DWARF features, now that it
is just needing libelf, after "perf jit: Enable jitdump support without
dwarf" it fails.
So, as preparation for "perf jit: Enable jitdump support without dwarf",
conditionally define it, if not available.
Cc: Adrian Hunter <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Maciej Debski <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When the loop body isn't executed at all, then the 'ret' local variable,
that is uninitialized will be used as the return value.
This triggers this error on Alpine Linux:
CC /tmp/build/perf/util/demangle-java.o
CC /tmp/build/perf/util/demangle-rust.o
CC /tmp/build/perf/util/jitdump.o
CC /tmp/build/perf/util/genelf.o
util/jitdump.c: In function 'jit_process':
util/jitdump.c:622:3: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
fprintf(stderr, "injected: %s (%d)\n", path, ret);
^
util/jitdump.c:584:6: note: 'ret' was declared here
int ret;
^
FLEX /tmp/build/perf/util/parse-events-flex.c
/ $ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-alpine-linux-musl/5.3.0/lto-wrapper
Target: x86_64-alpine-linux-musl
Configured with: /home/buildozer/aports/main/gcc/src/gcc-5.3.0/configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info
+--build=x86_64-alpine-linux-musl --host=x86_64-alpine-linux-musl --target=x86_64-alpine-linux-musl --with-pkgversion='Alpine 5.3.0' --enable-checking=release
+--disable-fixed-point --disable-libstdcxx-pch --disable-multilib --disable-nls --disable-werror --disable-symvers --enable-__cxa_atexit --enable-esp
+--enable-cloog-backend --enable-languages=c,c++,objc,java,fortran,ada --disable-libssp --disable-libmudflap --disable-libsanitizer --enable-shared
+--enable-threads --enable-tls --with-system-zlib
Thread model: posix
gcc version 5.3.0 (Alpine 5.3.0)
But this so far got under the radar, not causing any build problem, till the
"perf jit: enable jitdump support without dwarf" gets applied, when the above
problem takes place, some combination of inlining or whatever, the problem
is real, so fix it by initializing the variable to zero.
Cc: Anton Blanchard <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Maciej Debski <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It can be useful to specify branch type state per event, for example if
we want to collect both software trace points and last branch PMU events
in a single collection. Currently this doesn't work because the software
trace point errors out with -b.
There was already a branch-type parameter to configure branch sample
types per event in the parser, but it was stubbed out. This patch
implements the necessary plumbing to actually enable it.
Now:
$ perf record -e sched:sched_switch,cpu/cpu-cycles,branch_type=any/ ...
works.
Signed-off-by: Andi Kleen <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
- Some editing (params -> parameters)
- Point to the now more complete list of parameters in the perf list
manpage.
Signed-off-by: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Display name of feature instead of just the number
during recording data.
Before:
failed to write feature 13
Now:
failed to write feature HEADER_CPU_TOPOLOGY
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Display missing features in header info, like:
$ perf report --header-only
# ========
# captured on: Mon Oct 10 09:39:47 2016
...
# missing features: HEADER_TRACING_DATA HEADER_CPU_TOPOLOGY ...
To help in diagnosing problems.
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It's not displayed in TUI now, putting it into generic part.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding for_each_clear_bit macro plus all its the necessary backbone
functions. Taken from related kernel code. It will be used in following
patch.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding version support for libtraceevent.so object.
Using the existing EVENT_PARSE_VERSION variable to construct
the .so object version string, which now consists of:
$(EP_VERSION).$(EP_PATCHLEVEL).$(EP_EXTRAVERSION)
Looks like it was created for this purpose anyway.
The build will now produce following traeceevent libraries:
$ ll libtraceevent*
libtraceevent.a
libtraceevent.so -> libtraceevent.so.1.1.0
libtraceevent.so.1 -> libtraceevent.so.1.1.0
libtraceevent.so.1.1.0
Also the install target will carry them:
$ make DESTDIR=/tmp/krava prefix=/usr install
INSTALL trace_plugins
INSTALL libtraceevent.a
INSTALL libtraceevent.so.1.1.0
$ find /tmp/krava/ | xargs ls -l
...
/tmp/krava/usr/lib64:
total 572
libtraceevent.a
libtraceevent.so -> libtraceevent.so.1.1.0
libtraceevent.so.1 -> libtraceevent.so.1.1.0
libtraceevent.so.1.1.0
...
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To ease up following patch.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Decompose the do_install function to ease up
the following patch a little.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding install_headers target to install all headers
under 'include/traceevent' path, like:
$ make DESTDIR=/tmp/krava prefix=/usr install_headers
$ find /tmp/krava/ -type f
/tmp/krava/usr/include/traceevent/kbuffer.h
/tmp/krava/usr/include/traceevent/event-utils.h
/tmp/krava/usr/include/traceevent/event-parse.h
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get up to the recent compat pread/pwrite changes, that albeit not
being used by 'perf trace' due to some raw_syscalls tracepoint
limitations, trigger this warning when building perf:
Warning: x86_64's syscall_64.tbl differs from kernel
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When looking at Intel PT traces with perf script it is useful to have
some indication of the instruction. Dump the instruction bytes and
instruction length, which can be used for simple pattern analysis in
scripts.
% perf record -e intel_pt// foo
% perf script --itrace=i0ns -F ip,insn,insnlen
ffffffff8101232f ilen: 5 insn: 0f 1f 44 00 00
ffffffff81012334 ilen: 1 insn: 5b
ffffffff81012335 ilen: 1 insn: 5d
ffffffff81012336 ilen: 1 insn: c3
ffffffff810123e3 ilen: 1 insn: 5b
ffffffff810123e4 ilen: 2 insn: 41 5c
ffffffff810123e6 ilen: 1 insn: 5d
ffffffff810123e7 ilen: 1 insn: c3
ffffffff810124a6 ilen: 2 insn: 31 c0
ffffffff810124a8 ilen: 9 insn: 41 83 bc 24 a8 01 00 00 01
ffffffff810124b1 ilen: 2 insn: 75 87
...
Signed-off-by: Andi Kleen <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Change Intel PT and BTS to pass up the length and the instruction
bytes of the decoded or sampled instruction in the perf sample.
The decoder already knows this information, we just need to pass it
up. Since it is only a couple of movs it is not very expensive.
Handle instruction cache too. Make sure ilen is always initialized.
Used in the next patch.
[Adrian: re-base on top (and adjust for) instruction buffer size tidy-up]
[Adrian: add BTS support and adjust commit message accordingly]
Signed-off-by: Adrian Hunter <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Andi Kleen <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Tidy instruction buffer size usage in preparation for copying the
instruction bytes onto samples.
The instruction buffer is presently used for debugging, so rename its
size macro from INTEL_PT_INSN_DBG_BUF_SZ to INTEL_PT_INSN_BUF_SZ, and
use it everywhere.
Note that the maximum instruction size is 15 which is a less efficient size
to copy than 16, which is why a separate buffer size is used.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The previous patch renamed several files that are cross-referenced
along the Kernel documentation. Adjust the links to point to
the right places.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The test case is very similar to reuseport_bpf_cpu, only that here
we select socket members based on current numa node id.
# numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3 4 5 12 13 14 15 16 17
node 0 size: 128867 MB
node 0 free: 120080 MB
node 1 cpus: 6 7 8 9 10 11 18 19 20 21 22 23
node 1 size: 96765 MB
node 1 free: 87504 MB
node distances:
node 0 1
0: 10 20
1: 20 10
# ./reuseport_bpf_numa
---- IPv4 UDP ----
send node 0, receive socket 0
send node 1, receive socket 1
send node 1, receive socket 1
send node 0, receive socket 0
---- IPv6 UDP ----
send node 0, receive socket 0
send node 1, receive socket 1
send node 1, receive socket 1
send node 0, receive socket 0
---- IPv4 TCP ----
send node 0, receive socket 0
send node 1, receive socket 1
send node 1, receive socket 1
send node 0, receive socket 0
---- IPv6 TCP ----
send node 0, receive socket 0
send node 1, receive socket 1
send node 1, receive socket 1
send node 0, receive socket 0
SUCCESS
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Normally we limit the main list to contain only entries with HITM %
value > 0.0005, but it might be useful to display all captured entries.
Adding --show-all option for that.
Requested-and-Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a possibility to disable source line column with new --no-source
option. It source line data could take lot of time to retrieve, so it
could be a performance burden for big data.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add man page for c2c command and credits to builtin-c2c.c file.
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|