| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Avoid race between process wakeup and tpacket_v3 block timeout.
The test waits for cfg_timeout_msec for packets to arrive. Packets
arrive in tpacket_v3 rings, which pass packets ("frames") to the
process in batches ("blocks"). The sk waits for req3.tp_retire_blk_tov
msec to release a block.
Set the block timeout lower than the process waiting time, else
the process may find that no block has been released by the time it
scans the socket list. Convert to a ring of more than one, smaller,
blocks with shorter timeouts. Blocks must be page aligned, so >= 64KB.
Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test")
Signed-off-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There are some issues with the bpf/nat6to4.c building.
1. It use TEST_CUSTOM_PROGS, which will add the nat6to4.o to
kselftest-list file and run by common run_tests.
2. When building the test via `make -C tools/testing/selftests/
TARGETS="net"`, the nat6to4.o will be build in selftests/net/bpf/
folder. But in test udpgro_frglist.sh it refers to ../bpf/nat6to4.o.
The correct path should be ./bpf/nat6to4.o.
3. If building the test via `make -C tools/testing/selftests/ TARGETS="net"
install`. The nat6to4.o will be installed to kselftest_install/net/
folder. Then the udpgro_frglist.sh should refer to ./nat6to4.o.
To fix the confusing test path, let's just move the nat6to4.c to net folder
and build it as TEST_GEN_FILES.
Fixes: edae34a3ed92 ("selftests net: add UDP GRO fraglist + bpf self-tests")
Tested-by: Björn Töpel <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
__USE_GNU should be an internal macro only used inside glibc. Either
memfd_create() or fallocate() requires _GNU_SOURCE per man page, where
__USE_GNU will further be defined by glibc headers include/features.h:
#ifdef _GNU_SOURCE
# define __USE_GNU 1
#endif
This fixes:
>> hugetlb-madvise.c:20: warning: "__USE_GNU" redefined
20 | #define __USE_GNU
|
In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33,
from /usr/include/stdlib.h:26,
from hugetlb-madvise.c:16:
/usr/include/features.h:407: note: this is the location of the previous definition
407 | # define __USE_GNU 1
|
Link: https://lkml.kernel.org/r/Y8V9z+z6Tk7NetI3@x1n
Signed-off-by: Peter Xu <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Mike Kravetz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Merge branch 'master' into mm-hotfixes-stable
|
|
If CONFIG_NF_CONNTRACK=m, there are no definitions of NF_NAT_MANIP_SRC
and NF_NAT_MANIP_DST in vmlinux.h, build test_bpf_nf.c failed.
$ make -C tools/testing/selftests/bpf/
CLNG-BPF [test_maps] test_bpf_nf.bpf.o
progs/test_bpf_nf.c:160:42: error: use of undeclared identifier 'NF_NAT_MANIP_SRC'
bpf_ct_set_nat_info(ct, &saddr, sport, NF_NAT_MANIP_SRC);
^
progs/test_bpf_nf.c:163:42: error: use of undeclared identifier 'NF_NAT_MANIP_DST'
bpf_ct_set_nat_info(ct, &daddr, dport, NF_NAT_MANIP_DST);
^
2 errors generated.
Copy the definitions in include/net/netfilter/nf_nat.h to test_bpf_nf.c,
in order to avoid redefinitions if CONFIG_NF_CONNTRACK=y, rename them with
___local suffix. This is similar with commit 1058b6a78db2 ("selftests/bpf:
Do not fail build if CONFIG_NF_CONNTRACK=m/n").
Fixes: b06b45e82b59 ("selftests/bpf: add tests for bpf_ct_set_nat_info kfunc")
Signed-off-by: Tiezhu Yang <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-by: Jiri Olsa <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Perf test "build id cache operations" fails for PE executable. Logs
below from powerpc system. Same is observed on x86 as well.
<<>>
Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok
build id: 5a0fd882b53084224ba47b624c55a469
link: /tmp/perf.debug.w0V/.build-id/5a/0fd882b53084224ba47b624c55a469
file: /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf
failed: file /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist
test child finished with -1
---- end ----
build id cache operations: FAILED!
<<>>
The test tries to do:
<<>>
mkdir /tmp/perf.debug.TeY1
perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a ./tests/shell/../pe-file.exe
<<>>
The option "--buildid-dir" sets the build id cache directory as
/tmp/perf.debug.TeY1. The option given to buildid-cahe, ie "-a
./tests/shell/../pe-file.exe", is to add the pe-file.exe to the cache.
The testcase, sets buildid-dir and adds the file: pe-file.exe to build
id cache. To check if the command is run successfully, "check" function
looks for presence of the file in buildid cache directory. But the check
here expects the added file to be executable. Snippet below:
<<>>
if [ ! -x $file ]; then
echo "failed: file ${file} does not exist"
exit 1
fi
<<>>
The buildid test is done for sha1 binary, md5 binary and also for PE
file. The first two binaries are created at runtime by compiling with
"--build-id" option and hence the check for sha1/md5 test should use [ !
-x ]. But in case of PE file, the permission for this input file is
rw-r--r-- Hence the file added to build id cache has same permissoin
Original file:
ls tests/pe-file.exe | xargs stat --printf "%n %A \n"
tests/pe-file.exe -rw-r--r--
buildid cache file:
ls /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf | xargs stat --printf "%n %A \n"
/tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf -rw-r--r--
Fix the test to match with the permission of original file in case of FE
file. ie if the "tests/pe-file.exe" file is not having exec permission,
just check for existence of the buildid file using [ ! -e <file> ]
Signed-off-by: Athira Jajeev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nageswara R Sastry <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
build-id cache
The test "build id cache operations" fails on powerpc as below:
Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok
build id: 5a0fd882b53084224ba47b624c55a469
link: /tmp/perf.debug.ZTu/.build-id/5a/0fd882b53084224ba47b624c55a469
file: /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf
failed: file /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist
test child finished with -1
---- end ----
build id cache operations: FAILED!
The failing test is when trying to add pe-file.exe to build id cache.
'perf buildid-cache' can be used to add/remove/manage files from the
build-id cache. "-a" option is used to add a file to the build-id cache.
Simple command to do so for a PE exe file:
# ls -ltr tests/pe-file.exe
-rw-r--r--. 1 root root 75595 Jan 10 23:35 tests/pe-file.exe
The file is in home directory.
# mkdir /tmp/perf.debug.TeY1
# perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a tests/pe-file.exe
The above will create ".build-id" folder in build id directory, which is
/tmp/perf.debug.TeY1. Also adds file to this folder under build id.
Example:
# ls -ltr /tmp/perf.debug.TeY1/.build-id/5a/0fd882b53084224ba47b624c55a469/
total 76
-rw-r--r--. 1 root root 0 Jan 11 00:38 probes
-rwxr-xr-x. 1 root root 75595 Jan 11 00:38 elf
We can see in the results that file mode for original file and file in
build id directory is different. ie, build id file has executable
permission whereas original file doesn’t have.
The code path and function (build_id_cache__add to add a file to the
cache is in "util/build-id.c". In build_id_cache__add() function, it
first attempts to link the original file to destination cache folder.
If linking the file fails (which can happen if the destination and
source is on a different mount points), it will copy the file to
destination. Here copyfile() routine explicitly uses mode as "755" and
hence file in the destination will have executable permission.
Code snippet:
if (link(realname, filename) && errno != EEXIST && copyfile(name, filename))
strace logs:
172285 link("/home/<user_name>/linux/tools/perf/tests/pe-file.exe", "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf") = -1 EXDEV (Invalid cross-device link)
172285 newfstatat(AT_FDCWD, "tests/pe-file.exe", {st_mode=S_IFREG|0644, st_size=75595, ...}, 0) = 0
172285 openat(AT_FDCWD, "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/.elf.KbAnsl", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
172285 fchmod(3, 0755) = 0
172285 openat(AT_FDCWD, "tests/pe-file.exe", O_RDONLY) = 4
172285 mmap(NULL, 75595, PROT_READ, MAP_PRIVATE, 4, 0) = 0x7fffa5cd0000
172285 pwrite64(3, "MZ\220\0\3\0\0\0\4\0\0\0\377\377\0\0\270\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 75595, 0) = 75595
Whereas if the link succeeds, it succeeds in the first attempt itself
and the file in the build-id dir will have same permission as original
file.
Example, above uses /tmp. Instead if we use "--buildid-dir /home/build",
linking will work here since mount points are same. Hence the
destination file will not have executable permission.
Since the testcase "tests/shell/buildid.sh" always looks for executable
file, test fails in powerpc environment when test is run from /root.
The patch adds a change in build_id_cache__add() to use copyfile_mode()
which also passes the file’s original mode as argument. This way the
destination file mode also will be same as original file.
Signed-off-by: Athira Jajeev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nageswara R Sastry <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
expression lexer
The current implementation does not account for a trailing backslash
followed by a null-byte.
If a null-byte is encountered following a backslash, normalize() will
continue reading (and potentially writing) into garbage memory ignoring
the EOS null-byte.
Signed-off-by: Sohom Datta <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up the changes in:
07a368b3f55a79d3 ("bug: introduce ASSERT_STRUCT_OFFSET")
This cset only introduces a build time assert macro, that may be useful
at some point for tooling, for now it silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/linux/build_bug.h' differs from latest version at 'include/linux/build_bug.h'
diff -u tools/include/linux/build_bug.h include/linux/build_bug.h
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Maxim Levitsky <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
b5f0de6df6dce8d6 ("net: dev: Convert sa_data to flexible array in struct sockaddr")
That don't result in any changes in the tables generated from that
header.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get the changes in:
decb17aeb8fa2148 ("KVM: arm64: vgic: Add Apple M2 cpus to the list of broken SEIS implementations")
07e39e60bbf0ccd5 ("arm64: Add Cortex-715 CPU part definition")
8ec8490a1950efec ("arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro")
That addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h'
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Ali Saidi <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: D Scott Phillips <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Will Deacon <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes from:
9cb1096f8590bc59 ("KVM: arm64: Enable ring-based dirty memory tracking")
That doesn't result in any changes in tooling (built on a Libre Computer
Firefly ROC-RK3399-PC-V1.1-A running Ubuntu 22.04), only addresses this
perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <[email protected]>
Cc: Gavin Shan <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding verifier tests for loading all types od allowed
sleepable programs plus reject for tp_btf type.
Acked-by: Song Liu <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
To pick the changes in:
8aff460f216753d8 ("KVM: x86: Add a VALID_MASK for the flags in kvm_msr_filter_range")
c1340fe3590ebbe7 ("KVM: x86: Add a VALID_MASK for the flag in kvm_msr_filter")
be83794210e7020f ("KVM: x86: Disallow the use of KVM_MSR_FILTER_DEFAULT_ALLOW in the kernel")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Aaron Lewis <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
b0305c1e0e27ad91 ("KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"21 hotfixes. Thirteen of these address pre-6.1 issues and hence have
the cc:stable tag"
* tag 'mm-hotfixes-stable-2023-01-16-15-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
init/Kconfig: fix typo (usafe -> unsafe)
nommu: fix split_vma() map_count error
nommu: fix do_munmap() error path
nommu: fix memory leak in do_mmap() error path
MAINTAINERS: update Robert Foss' email address
proc: fix PIE proc-empty-vm, proc-pid-vm tests
mm: update mmap_sem comments to refer to mmap_lock
include/linux/mm: fix release_pages_arg kernel doc comment
lib/win_minmax: use /* notation for regular comments
kasan: mark kasan_kunit_executing as static
nilfs2: fix general protection fault in nilfs_btree_insert()
Docs/admin-guide/mm/zswap: remove zsmalloc's lack of writeback warning
mm/hugetlb: pre-allocate pgtable pages for uffd wr-protects
hugetlb: unshare some PMDs when splitting VMAs
mm: fix vma->anon_name memory leak for anonymous shmem VMAs
mm/shmem: restore SHMEM_HUGE_DENY precedence over MADV_COLLAPSE
mm/MADV_COLLAPSE: don't expand collapse when vm_end is past requested end
mm/userfaultfd: enable writenotify while userfaultfd-wp is enabled for a VMA
mm/khugepaged: fix collapse_pte_mapped_thp() to allow anon_vma
mm/hugetlb: fix uffd-wp handling for migration entries in hugetlb_change_protection()
...
|
|
Pable Neira Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Increase timeout to 120 seconds for netfilter selftests to fix
nftables transaction tests, from Florian Westphal.
2) Fix overflow in bitmap_ip_create() due to integer arithmetics
in a 64-bit bitmask, from Gavrilov Ilia.
3) Fix incorrect arithmetics in nft_payload with double-tagged
vlan matching.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Add ipip6 and ip6ip decap testcases. Verify that bpf_skb_adjust_room()
correctly decapsulate ipip6 and ip6ip tunnel packets.
Signed-off-by: Ziyang Xuan <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/dfd2d8cfdf9111bd129170d4345296f53bee6a67.1673574419.git.william.xuanziyang@huawei.com
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Add ipip6 and ip6ip decap support for bpf_skb_adjust_room().
Main use case is for using cls_bpf on ingress hook to decapsulate
IPv4 over IPv6 and IPv6 over IPv4 tunnel packets.
Add two new flags BPF_F_ADJ_ROOM_DECAP_L3_IPV{4,6} to indicate the
new IP header version after decapsulating the outer IP header.
Suggested-by: Willem de Bruijn <[email protected]>
Signed-off-by: Ziyang Xuan <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/b268ec7f0ff9431f4f43b1b40ab856ebb28cb4e1.1673574419.git.william.xuanziyang@huawei.com
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"memblock: always release pages to the buddy allocator in
memblock_free_late()
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the
deferred init process.
memblock_free_pages() is called by memblock_free_late(), which is used
to free reserved ranges after memblock_free_all() has run. All pages
in reserved ranges have been initialized at that point, and
accordingly, those pages are not touched by the deferred init process.
This means that currently, if the pages that memblock_free_late()
intends to release are in the deferred range, they will never be
released to the buddy allocator. They will forever be reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call
__free_pages_core() directly instead.
One case where this issue can occur in the wild is EFI boot on x86_64.
The x86 EFI code reserves all EFI boot services memory ranges via
memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively).
If any of those ranges happens to fall within the deferred init range,
the pages will not be released and that memory will be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages"
* tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm: Always release pages to the buddy allocator in memblock_free_late().
|
|
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux,
it is possible to have that if the MPTCP socket has been created with
AF_INET6 family without the IPV6_V6ONLY option.
Here, a new IPv4 subflow is being added to the initial IPv6 connection,
then being removed using Netlink commands.
Cc: [email protected] # v5.19+
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add the missing space after 'dest' variable assignment.
This change will resolve the following checkpatch.pl
script error:
ERROR: spaces required around that '+=' (ctx:VxW)
Signed-off-by: Roberto Valenzuela <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
'.' is not allowed in the event name of kprobe. Therefore, we will get a
EINVAL if the kernel function name has a '.' in legacy kprobe attach
case, such as 'icmp_reply.constprop.0'.
In order to adapt this case, we need to replace the '.' with other char
in gen_kprobe_legacy_event_name(). And I use '_' for this propose.
Signed-off-by: Menglong Dong <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When the clang toolchain has stack protection enabled in order to be
consistent with gcc - which just happens to be the case on Gentoo -
the bpftool build fails:
[...]
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/pid_iter.bpf.c -o pid_iter.bpf.o
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/profiler.bpf.c -o profiler.bpf.o
skeleton/profiler.bpf.c:40:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fentry_XXX)
^
skeleton/profiler.bpf.c:94:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fexit_XXX)
^
2 errors generated.
[...]
Since stack-protector makes no sense for the BPF bits just unconditionally
disable it.
Bug: https://bugs.gentoo.org/890638
Signed-off-by: Holger Hoffstätte <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
drivers/net/usb/r8152.c
be53771c87f4 ("r8152: add vendor/device ID pair for Microsoft Devkit")
ec51fbd1b8a2 ("r8152: add USB device driver for config selection")
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc.
The rxrpc changes are noticeable large: to address a recent regression
has been necessary completing the threaded refactor.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security
entity (SecY)"
* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
r8152: add vendor/device ID pair for Microsoft Devkit
net: stmmac: add aux timestamps fifo clearance wait
bnxt: make sure we return pages to the pool
net: hns3: fix wrong use of rss size during VF rss config
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
net: sched: disallow noqueue for qdisc classes
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
octeontx2-pf: Fix resource leakage in VF driver unbind
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
net/mlx5e: Fix macsec ssci attribute handling in offload path
net/mlx5: E-switch, Coverity: overlapping copy
net/mlx5e: Don't support encap rules with gbp option
net/mlx5: Fix ptp max frequency adjustment range
net/mlx5e: Fix memory leak on updating vport counters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
- Fix objtool to be more permissive with hand-written assembly that
uses non-function symbols in executable sections.
* tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Tolerate STT_NOTYPE symbols at end of section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc fixes from Paul McKenney:
- The fd_set structure was incorrectly defined as arrays of u32 instead
of long, which breaks BE64. Fix courtesy of Sven Schnelle.
- S_ISxxx macros were incorrectly testing the bits after applying them
instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh.
- The mips code was randomly broken due to an unprotected "noreorder"
directive in the _start code that could prevent the assembler from
filling delayed slots. This in turn resulted in random other
instructions being placed into those slots. Fix courtesy of Willy
Tarreau.
- The current nolibc header layout refrains from including files that
are not explicitly included by the code using nolibc. Unfortunately,
this causes build failures when such files contain definitions that
are used (for example) by libgcc. Example definitions include raise()
and memset(), which are called by some architectures, but only at
certain optimization levels. Fix courtesy of Willy Tarreau.
- gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction
inside the memset() definition. The compiler replaced this
construction with a call to... memset(). Userland cannot be forced to
build with -ffreestanding, so an empty asm() statement was introduced
into the loop the loop in order to prevent the compiler from making
this unproductive transformation. Fix courtesy of Willy Tarreau.
- Most of the O_* macros were wrong on RISCV because their octal values
were coded as hexadecimal. This resulted in the getdents64() selftest
failing. Fix courtesy of Willy Tarreau.
This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and
riscv, all at -O0, -Os and -O3.
* tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc: fix the O_* fcntl/open macro definitions for riscv
tools/nolibc: prevent gcc from making memset() loop over itself
tools/nolibc: fix missing includes causing build issues at -O0
tools/nolibc: restore mips branch ordering in the _start block
tools/nolibc: Fix S_ISxxx macros
nolibc: fix fd_set type
|
|
We are missing a ) when we attempt to complain about not having enough
configuration for clang, resulting in the rather inscrutable error:
../lib.mk:23: *** unterminated call to function 'error': missing ')'. Stop.
Add the required ) so we print the message we were trying to print.
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This adds utility to check vsock rx/tx performance.
Usage as sender:
./vsock_perf --sender <cid> --port <port> --bytes <bytes to send>
Usage as receiver:
./vsock_perf --port <port> --rcvlowat <SO_RCVLOWAT>
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This adds test for sending message, bigger than peer's buffer size.
For SOCK_SEQPACKET socket it must fail, as this type of socket has
message size limit.
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This updates message bound test making it more complex. Instead of
sending 1 bytes messages with one MSG_EOR bit, it sends messages of
random length(one half of messages are smaller than page size, second
half are bigger) with random number of MSG_EOR bits set. Receiver
also don't know total number of messages.
Signed-off-by: Arseniy Krasnov <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Implement automatic switching of XDP programs and execution modes if
needed by a test. This makes it much simpler to write a test as it
only has to say what XDP program it needs if it is not the default
one. This also makes it possible to remove the initial explicit
attachment of the XDP program as well as the explicit mode switch in
the code. These are now handled by the same code that just checks if a
switch is necessary, so no special cases are needed.
The default XDP program for all tests is one that sends all packets to
the AF_XDP socket. If you need another one, please use the new
function test_spec_set_xdp_prog() to specify what XDP programs and
maps to use for this test.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Automatically restore the default packet stream if needed at the end
of each test. This so that test writers do not forget to do this.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Make the thread dispatching code common by unifying the dual and
single thread dispatcher code. This so we do not have to add code in
two places in upcoming commits.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a new test where some of the packets are not passed to the AF_XDP
socket and instead get a XDP_DROP verdict. This is important as it
tests the recycling mechanism of the buffer pool. If a packet is not
sent to the AF_XDP socket, the buffer the packet resides in is instead
recycled so it can be used again without the round-trip to user
space. The test introduces a new XDP program that drops every other
packet.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Get rid of the built-in XDP program that was part of the old libbpf
code in xsk.c and replace it with an eBPF program build using the
framework by all the other bpf selftests. This will form the base for
adding more programs in later commits.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Remove unnecessary code in the control path. This is located in the
file xsk.c that was moved from libbpf when the xsk support there was
deprecated. Some of the code there is not needed anymore as the
selftests are only guaranteed to run on the kernel it is shipped
with. Therefore, all the code that has to deal with compatibility of
older kernels can be dropped and also any other function that is not
of any use for the tests.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Load and attach the XDP program only once per XDP mode that is being
executed. Today, the XDP program is loaded and attached for every
test, then unloaded, which takes a long time on real NICs, since they
have to reconfigure their HW, in contrast to veth. The test suite now
completes in 21 seconds, instead of 207 seconds previously on my
machine. This is a speed-up of around 10x.
This is accomplished by moving the XDP loading from the worker threads
to the main thread and replacing the XDP loading interfaces of xsk.c
that was taken from the xsk support in libbpf, with something more
explicit that is more useful for these tests. Instead, the relevant
file descriptors and ifindexes are just passed down to the new
functions.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Remove the namespaces used as they fill no function. This will
simplify the code for speeding up the tests in the following commits.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Replace our own homegrown assembly store/release and load/acquire
implementations with the HW agnositic atomic APIs C11 offers. This to
make the code more portable, easier to read, and reduce the
maintenance burden.
The original code used load-acquire and store-release barriers
hand-coded in assembly. Since C11, these kind of operations are
offered as built-ins in gcc and llvm. The load-acquire operation
prevents hoisting of non-atomic memory operations to before this
operation and it corresponds to the __ATOMIC_ACQUIRE operation in the
built-in atomics. The store-release operation prevents hoisting of
non-atomic memory operations to after this operation and it
corresponds to the __ATOMIC_RELEASE operation in the built-in atomics.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a new option to the test_xsk.sh script that only creates the two
veth netdevs and the extra namespace, then exits without running any
tests. The failed test can then be executed in the debugger without
having to create the netdevs and namespace manually. For ease-of-use,
the veth netdevs to use are printed so they can be copied into the
debugger.
Here is an example how to use it:
> sudo ./test_xsk.sh -d
veth10 veth11
> gdb xskxceiver
In gdb:
run -i veth10 -i veth11
And now the test cases can be debugged with gdb.
If you want to debug the test suite on a real NIC in loopback mode,
there is no need to use this feature as you already know the netdev of
your NIC.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Remove the unused variable outstanding_tx.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Print the correct error codes when exiting the test suite due to some
terminal error. Some of these had a switched sign and some of them
printed zero instead of errno.
Fixes: facb7cb2e909 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL")
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Submit the correct number of frames in the function
xsk_populate_fill_ring(). For the tests that set the flag
use_addr_for_fill, uninitialized buffers were sent to the fill ring
following the correct ones. This has no impact on the tests, since
they only use the ones that were initialized. But for correctness,
this should be fixed.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Do not close descriptors that have never been used. File descriptor
fields that are not in use are erroneously marked with the number 0,
which is a valid fd. Mark unused fds with -1 instead and do not close
these when deleting the socket.
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Print the correct payload when the packet dump option is selected. The
network to host conversion was forgotten and the payload was
erronously declared to be an int instead of an unsigned int.
Fixes: facb7cb2e909 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL")
Signed-off-by: Magnus Karlsson <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
vsyscall detection code uses direct call to the beginning of
the vsyscall page:
asm ("call %P0" :: "i" (0xffffffffff600000))
It generates "call rel32" instruction but it is not relocated if binary
is PIE, so binary segfaults into random userspace address and vsyscall
page status is detected incorrectly.
Do more direct:
asm ("call *%rax")
which doesn't do need any relocaltions.
Mark g_vsyscall as volatile for a good measure, I didn't find instruction
setting it to 0. Now the code is obviously correct:
xor eax, eax
mov rdi, rbp
mov rsi, rbp
mov DWORD PTR [rip+0x2d15], eax # g_vsyscall = 0
mov rax, 0xffffffffff600000
call rax
mov DWORD PTR [rip+0x2d02], 1 # g_vsyscall = 1
mov eax, DWORD PTR ds:0xffffffffff600000
mov DWORD PTR [rip+0x2cf1], 2 # g_vsyscall = 2
mov edi, [rip+0x2ceb] # exit(g_vsyscall)
call exit
Note: fixed proc-empty-vm test oopses 5.19.0-28-generic kernel
but this is separate story.
Link: https://lkml.kernel.org/r/Y7h2xvzKLg36DSq8@p183
Fixes: 5bc73bb3451b9 ("proc: test how it holds up with mapping'less process")
Signed-off-by: Alexey Dobriyan <[email protected]>
Reported-by: Mirsad Goran Todorovac <[email protected]>
Tested-by: Mirsad Goran Todorovac <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The kselftest framework uses a default timeout of 45 seconds for
all test scripts.
Increase the timeout to two minutes for the netfilter tests, this
should hopefully be enough,
Make sure that, should the script be canceled, the net namespace and
the spawned ping instances are removed.
Fixes: 25d8bcedbf43 ("selftests: add script to stress-test nft packet path vs. control plane")
Reported-by: Mirsad Goran Todorovac <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Tested-by: Mirsad Goran Todorovac <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
When a match has been made to the nth duplicate symbol, return
success not error.
Example:
Before:
$ cat file.c
cat: file.c: No such file or directory
$ cat file1.c
#include <stdio.h>
static void func(void)
{
printf("First func\n");
}
void other(void);
int main()
{
func();
other();
return 0;
}
$ cat file2.c
#include <stdio.h>
static void func(void)
{
printf("Second func\n");
}
void other(void)
{
func();
}
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
First func
Second func
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
1231062.526977619: tr strt 0 [unknown] => 558495708179 func
1231062.526977619: tr end call 558495708188 func => 558495708050 _init
1231062.526979286: tr strt 0 [unknown] => 55849570818d func
1231062.526979286: tr end return 55849570818f func => 55849570819d other
Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Tested-by: Dmitry Dolgov <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|