| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
tools/testing/selftests/net/ioam6.sh
7b1700e009cc ("selftests: net: modify IOAM tests for undef bits")
bf77b1400a56 ("selftests: net: Test for the IOAM encapsulation with IPv6")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Quite calm.
The noisy DSA driver (embedded switches) changes, and adjustment to
IPv6 IOAM behavior add to diffstat's bottom line but are not scary.
Current release - regressions:
- af_unix: rename UNIX-DGRAM to UNIX to maintain backwards
compatibility
- procfs: revert "add seq_puts() statement for dev_mcast", minor
format change broke user space
Current release - new code bugs:
- dsa: fix bridge_num not getting cleared after ports leaving the
bridge, resource leak
- dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware
bridges using VID 0, prevent packet drops if pvid is removed
- dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW
getting confused about station to VLAN mapping
Previous releases - regressions:
- virtio-net: fix for skb_over_panic inside big mode
- phy: do not shutdown PHYs in READY state
- dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link
LED staying lit after ifdown
- mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL)
- mqprio: Correct stats in mqprio_dump_class_stats()
- ice: fix deadlock for Tx timestamp tracking flush
- stmmac: fix feature detection on old hardware
Previous releases - always broken:
- sctp: account stream padding length for reconf chunk
- icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe()
- isdn: cpai: check ctr->cnr to avoid array index out of bound
- isdn: mISDN: fix sleeping function called from invalid context
- nfc: nci: fix potential UAF of rf_conn_info object
- dsa: microchip: prevent ksz_mib_read_work from kicking back in
after it's canceled in .remove and crashing
- dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged
ports
- dsa: sja1105, ocelot: break circular dependency between switch and
tag drivers
- dsa: felix: improve timestamping in presence of packe loss
- mlxsw: thermal: fix out-of-bounds memory accesses
Misc:
- ipv6: ioam: move the check for undefined bits to improve
interoperability"
* tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe
MAINTAINERS: Update the devicetree documentation path of imx fec driver
sctp: account stream padding length for reconf chunk
mlxsw: thermal: Fix out-of-bounds memory accesses
ethernet: s2io: fix setting mac address during resume
NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
nfc: fix error handling of nfc_proto_register()
Revert "net: procfs: add seq_puts() statement for dev_mcast"
net: encx24j600: check error in devm_regmap_init_encx24j600
net: korina: select CRC32
net: arc: select CRC32
net: dsa: felix: break at first CPU port during init and teardown
net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports
net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent
net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib
net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver
net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header
net: mscc: ocelot: deny TX timestamping of non-PTP packets
net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb
...
|
|
This should not be there.
Fixes: 2de03b45236f ("selftests: netfilter: add flowtable test script")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
The `cpu` argument of perf_evsel__read() must specify the cpu index.
perf_cpu_map__for_each_cpu() is for iterating the cpu number (not index)
and is thus not appropriate for use with perf_evsel__read().
So, if there is an offline CPU, the cpu number specified in the argument
may point out of range because the cpu number and the cpu index are
different.
Fix test_stat_cpu().
Testing it:
# make tests -C tools/lib/perf/
make: Entering directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'
running static:
- running tests/test-cpumap.c...OK
- running tests/test-threadmap.c...OK
- running tests/test-evlist.c...OK
- running tests/test-evsel.c...OK
running dynamic:
- running tests/test-cpumap.c...OK
- running tests/test-threadmap.c...OK
- running tests/test-evlist.c...OK
- running tests/test-evsel.c...OK
make: Leaving directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'
Signed-off-by: Shunsuke Nakamura <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In test_stat_user_read, following build error occurs except i386 and
x86_64 architectures:
tests/test-evsel.c:129:31: error: variable 'pc' set but not used [-Werror=unused-but-set-variable]
struct perf_event_mmap_page *pc;
Fix build error.
Signed-off-by: Shunsuke Nakamura <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Print offset of PERF_RECORD_COMPRESSED record instead of zero for
decompressed records in raw trace dump (-D option of perf-report):
0x17cf08 [0x28]: event: 9
instead of:
0 [0x28]: event: 9
The fix is not critical, because currently file_pos for compressed
events is used in perf_session__process_event only to show offsets
in the raw dump.
This patch was separated from patchset:
https://lore.kernel.org/lkml/[email protected]/
and was already rewieved.
Reviewed-by: Riccardo Mancini <[email protected]>
Signed-off-by: Alexey Bayduraev <[email protected]>
Tested-by: Riccardo Mancini <[email protected]>
Acked-by: Andi Kleen <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Antonov <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Budankov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a variant of ECN test that uses qdisc marked counter (supported on
Spectrum-3 and above) instead of the aggregate ethtool ecn_marked counter.
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The removal of eprobes was broken and missed in testing. Add various ways
to remove eprobes that are considered acceptable to the testing process to
catch when/if they break again.
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
The output behavior for undefined bits is now directly tested inside the bash
script. Trying to set an undefined bit should be refused.
The input behavior for undefined bits has been removed due to the fact that we
would need another sender allowed to set undefined bits.
Signed-off-by: Justin Iurman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add do_mark_test(), which is to do_ecn_test() like do_drop_test() is to
do_red_test(): meant to test that actions on the RED mark qevent block are
offloaded, and executed on ECN-marked packets.
The test splits install_qdisc() into its constituents, install_root_qdisc()
and install_qdisc_tcX(). This is in order to test that when mirroring is
enabled on one TC, the other TC does not mirror.
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
These variables are cut'n'pasted from other functions in the file and not
actually used.
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
- Fixes to address the structleak plugin causing the stack frame size
to grow immensely when used with KUnit. Fixes include adding a new
makefile to disable structleak and using it from KUnit iio, device
property, thunderbolt, and bitfield tests to disable it.
- KUnit framework reference count leak in kfree_at_end
- KUnit tool fix to resolve conflict between --json and --raw_output
and generate correct test output in either case.
- kernel-doc warnings due to mismatched arg names
* tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix kernel-doc warnings due to mismatched arg names
bitfield: build kunit tests without structleak plugin
thunderbolt: build kunit tests without structleak plugin
device property: build kunit tests without structleak plugin
iio/test-format: build kunit tests without structleak plugin
gcc-plugins/structleak: add makefile var for disabling structleak
kunit: fix reference count leak in kfree_at_end
kunit: tool: better handling of quasi-bool args (--json, --raw_output)
|
|
Add a test case that demonstrates port shadowing via UDP.
ns2 sends packet to ns1, from source port used by a udp service on the
router, ns0. Then, ns1 sends packet to ns0:service, but that ends up getting
forwarded to ns2.
Also add three test cases that demonstrate mitigations:
1. disable use of $port as source from 'unstrusted' origin
2. make the service untracked. This prevents masquerade entries
from having any effects.
3. add forced PAT via 'random' mode to translate the "wrong" sport
into an acceptable range.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
This is the s390 variant of commit 9855c4626c67 ("selftests/ftrace:
Add ppc support for kprobe args tests").
Acked-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
Add some ITS device init tests: general KVM device tests (address not
defined already, address aligned) and tests for the ITS region being
within the addressable IPA range.
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
IPA range
Add a new test into vgic_init which checks that the first vcpu fails to
run if there is not sufficient REDIST space below the addressable IPA
range. This only applies to the KVM_VGIC_V3_ADDR_TYPE_REDIST legacy API
as the required REDIST space is not know when setting the DIST region.
Note that using the REDIST_REGION API results in a different check at
first vcpu run: that the number of redist regions is enough for all
vcpus. And there is already a test for that case in, the first step of
test_v3_new_redist_regions.
Reviewed-by: Eric Auger <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add tests for checking that KVM returns the right error when trying to
set GICv2 CPU interfaces or GICv3 Redistributors partially above the
addressable IPA range. Also tighten the IPA range by replacing
KVM_CAP_ARM_VM_IPA_SIZE with the IPA range currently configured for the
guest (i.e., the default).
The check for the GICv3 redistributor created using the REDIST legacy
API is not sufficient as this new test only checks the check done using
vcpus already created when setting the base. The next commit will add
the missing test which verifies that the KVM check is done at first vcpu
run.
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add some GICv2 tests: general KVM device tests and DIST/CPUIF overlap
tests. Do this by making test_vcpus_then_vgic and test_vgic_then_vcpus
in vgic_init GIC version agnostic.
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Make vm_gic_create GIC version agnostic in the vgic_init test. Also
add a nr_vcpus arg into it instead of defaulting to NR_VCPUS.
No functional change.
Reviewed-by: Eric Auger <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
As a preparation for the next commits which will add some tests for
GICv2, make aarch64/vgic_init GIC version agnostic. Add a new generic
run_tests function(gic_dev_type) that starts all applicable tests using
GICv3 or GICv2. GICv2 tests are attempted if GICv3 is not available in
the system. There are currently no GICv2 tests, but the test passes now
in GICv2 systems.
Reviewed-by: Eric Auger <[email protected]>
Signed-off-by: Ricardo Koller <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Cleanup dummy headers in tools/bootconfig/include except
for tools/bootconfig/include/linux/bootconfig.h.
For this change, I use __KERNEL__ macro to split kernel
header #include and introduce xbc_alloc_mem() and
xbc_free_mem().
Link: https://lkml.kernel.org/r/163187299574.2366983.18371329724128746091.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Replace u16 and u32 with uint16_t and uint32_t so
that the tools/bootconfig only needs <stdint.h>.
Link: https://lkml.kernel.org/r/163187298835.2366983.9838262576854319669.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Print all error message in stderr. This also removes
unneeded tools/bootconfig/include/linux/printk.h.
Link: https://lkml.kernel.org/r/163187298106.2366983.15210300267326257397.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Avoid using this noisy name and use more calm one.
This is just a name change. No functional change.
Link: https://lkml.kernel.org/r/163187295918.2366983.5231840238429996027.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Run the bootconfig test script when build all target
so that user can notice any issue when build it.
Link: https://lkml.kernel.org/r/163187295173.2366983.18295281097397499118.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Add xbc_get_info() API which allows user to get the
number of used xbc_nodes and the size of bootconfig
data. This is also useful for checking the bootconfig
is initialized or not.
Link: https://lkml.kernel.org/r/163177340877.682366.4360676589783197627.stgit@devnote2
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Allocate 'xbc_data' in the xbc_init() so that it does
not need to care about the ownership of the copied
data.
Link: https://lkml.kernel.org/r/163177339986.682366.898762699429769117.stgit@devnote2
Suggested-by: Steven Rostedt <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Remove an extra section.len member in favour of section.sh_size
- Align .altinstructions section creation with the kernel's by creating
them with entry size of 0
- Fix objtool to convert a reloc symbol to a section offset and not to
not warn about not knowing how
* tag 'objtool_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Remove redundant 'len' field from struct section
objtool: Make .altinstructions section entry size consistent
objtool: Remove reloc symbol type checks in get_alt_entry()
|
|
The verifier tests added in commit c48e51c8b07a ("bpf: selftests: Add
selftests for module kfunc support") fail on s390, since the JIT does
not support calling kernel functions. This is most likely an issue for
all the other non-Intel arches, as well as on Intel with
!CONFIG_DEBUG_INFO_BTF or !CONFIG_BPF_JIT.
Trying to check for messages from all the possible add_kfunc_call()
failure cases in test_verifier looks pointless, so do a much simpler
thing instead: just like it's already done in do_prog_test_run(), skip
the tests that fail to load with ENOTSUPP.
Signed-off-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add new cipher as a variant of standard tls selftests.
Signed-off-by: Tianjia Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Change tests that often fails in parallel execution mode to serial.
Signed-off-by: Yucong Sun <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
bpf_get_current_pid_tgid() returns u64, whose upper 32 bits are the same
as userspace getpid() return value.
Signed-off-by: Yucong Sun <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This make atomics test able to run in parallel with other tests.
Signed-off-by: Yucong Sun <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch change cgroup_v1v2 use a different port, avoid conflict with
other tests.
Signed-off-by: Yucong Sun <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
In parallel execution mode, this test now need to use atomic operation
to avoid race condition.
Signed-off-by: Yucong Sun <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch make each worker use a unique cgroup base directory, thus
allowing tests that uses cgroups to run concurrently.
Signed-off-by: Yucong Sun <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch allows tests to define serial_test_name() instead of
test_name(), and this will make test_progs execute those in sequence
after all other tests finished executing concurrently.
Signed-off-by: Yucong Sun <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch adds "-j" mode to test_progs, executing tests in multiple
process. "-j" mode is optional, and works with all existing test
selection mechanism, as well as "-v", "-l" etc.
In "-j" mode, main process use UDS/SEQPACKET to communicate to each forked
worker, commanding it to run tests and collect logs. After all tests are
finished, a summary is printed. main process use multiple competing
threads to dispatch work to worker, trying to keep them all busy.
The test status will be printed as soon as it is finished, if there are
error logs, it will be printed after the final summary line.
By specifying "--debug", additional debug information on server/worker
communication will be printed.
Example output:
> ./test_progs -n 15-20 -j
[ 12.801730] bpf_testmod: loading out-of-tree module taints kernel.
Launching 8 workers.
#20 btf_split:OK
#16 btf_endian:OK
#18 btf_module:OK
#17 btf_map_in_map:OK
#19 btf_skc_cls_ingress:OK
#15 btf_dump:OK
Summary: 6/20 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yucong Sun <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a writable bare tracepoint in bpf_testmod module, and
trigger its calling when reading /sys/kernel/bpf_testmod
with a specific buffer length. The reading will return
the value in writable context if the early return flag
is enabled in writable context.
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Program on writable tracepoint is BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE,
but its attachment is the same as BPF_PROG_TYPE_RAW_TRACEPOINT.
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Since:
https://lore.kernel.org/lkml/[email protected]/
The output option works for 'perf kmem', however, it must appear after
'record'. This is different to 'stat' where '-i' for the input must
appear before. Try to capture this complication in the man page.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
With "make install", bpftool installs its binary and its bash completion
file. Usually, this is what we want. But a few components in the kernel
repository (namely, BPF iterators and selftests) also install bpftool
locally before using it. In such a case, bash completion is not
necessary and is just a useless build artifact.
Let's add an "install-bin" target to bpftool, to offer a way to install
the binary only.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The script test_bpftool_build.sh attempts to build bpftool in the
various supported ways, to make sure nothing breaks.
One of those ways is to run "make tools/bpf" from the root of the kernel
repository. This command builds bpftool, along with the other tools
under tools/bpf, and runqslower in particular. After running the
command and upon a successful bpftool build, the script attempts to
cleanup the generated objects. However, after building with this target
and in the case of runqslower, the files are not cleaned up as expected.
This is because the "tools/bpf" target sets $(OUTPUT) to
.../tools/bpf/runqslower/ when building the tool, causing the object
files to be placed directly under the runqslower directory. But when
running "cd tools/bpf; make clean", the value for $(OUTPUT) is set to
".output" (relative to the runqslower directory) by runqslower's
Makefile, and this is where the Makefile looks for files to clean up.
We cannot easily fix in the root Makefile (where "tools/bpf" is defined)
or in tools/scripts/Makefile.include (setting $(OUTPUT)), where changing
the way the output variables are passed would likely have consequences
elsewhere. We could change runqslower's Makefile to build in the
repository instead of in a dedicated ".output/", but doing so just to
accommodate a test script doesn't sound great. Instead, let's just make
sure that we clean up runqslower properly by adding the correct command
to the script.
This will attempt to clean runqslower twice: the first try with command
"cd tools/bpf; make clean" will search for tools/bpf/runqslower/.output
and fail to clean it (but will still clean the other tools, in
particular bpftool), the second one (added in this commit) sets the
$(OUTPUT) variable like for building with the "tool/bpf" target and
should succeed.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This is to ensure that the PMU event files can always be parsed by
other tools.
Testing
=======
* There are no errors when parsing files for all architectures:
# pmu-events/jevents nds32 pmu-events/arch/ test
# pmu-events/jevents s390 pmu-events/arch/ test
# pmu-events/jevents powerpc pmu-events/arch/ test
# pmu-events/jevents arm64 pmu-events/arch/ test
# pmu-events/jevents test pmu-events/arch/ test
# pmu-events/jevents x86 pmu-events/arch/ test
* Trailing and leading commas now cause a parse error
* Double commas now cause a parse error
* Compilation and parsing works with strict mode disabled and enabled
* A diff of the output files shows no changes
Reviewed-by: Andi Kleen <[email protected]>
Reviewed-by: Kajol Jain<[email protected]>
Signed-off-by: James Clark <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: [email protected]
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Return an error when a trailing comma is found or a new item is
encountered before a comma or an opening brace. This ensures that the
perf JSON files conform more closely to the spec at https://www.json.org
Reviewed-by: Andi Kleen <[email protected]>
Reviewed-by: Kajol Jain<[email protected]>
Signed-off-by: James Clark <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: [email protected]
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Remove trailing commas. A later commit will make the parser more strict
and these will not be valid anymore.
Reviewed-by: Andi Kleen <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Kajol Jain<[email protected]>
Signed-off-by: James Clark <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: [email protected]
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
API headers from libbpf should not be accessed directly from the
library's source directory. Instead, they should be exported with "make
install_headers". Let's make sure that runqslower installs the
headers properly when building.
We use a libbpf_hdrs target to mark the logical dependency on libbpf's
headers export for a number of object files, even though the headers
should have been exported at this time (since bpftool needs them, and is
required to generate the skeleton or the vmlinux.h).
When descending from a parent Makefile, the specific output directories
for building the library and exporting the headers are configurable with
BPFOBJ_OUTPUT and BPF_DESTDIR, respectively. This is in addition to
OUTPUT, on top of which those variables are constructed by default.
Also adjust the Makefile for the BPF selftests. We pass a number of
variables to the "make" invocation, because we want to point runqslower
to the (target) libbpf shared with other tools, instead of building its
own version. In addition, runqslower relies on (target) bpftool, and we
also want to pass the proper variables to its Makefile so that bpftool
itself reuses the same libbpf.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
API headers from libbpf should not be accessed directly from the
library's source directory. Instead, they should be exported with "make
install_headers". Let's make sure that resolve_btfids installs the
headers properly when building.
When descending from a parent Makefile, the specific output directories
for building the library and exporting the headers are configurable with
LIBBPF_OUT and LIBBPF_DESTDIR, respectively. This is in addition to
OUTPUT, on top of which those variables are constructed by default.
Also adjust the Makefile for the BPF selftests in order to point to the
(target) libbpf shared with other tools, instead of building a version
specific to resolve_btfids. Remove libbpf's order-only dependencies on
the include directories (they are created by libbpf and don't need to
exist beforehand).
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Bpftool relies on libbpf, therefore it relies on a number of headers
from the library and must be linked against the library. The Makefile
for bpftool exposes these objects by adding tools/lib as an include
directory ("-I$(srctree)/tools/lib"). This is a working solution, but
this is not the cleanest one. The risk is to involuntarily include
objects that are not intended to be exposed by the libbpf.
The headers needed to compile bpftool should in fact be "installed" from
libbpf, with its "install_headers" Makefile target. In addition, there
is one header which is internal to the library and not supposed to be
used by external applications, but that bpftool uses anyway.
Adjust the Makefile in order to install the header files properly before
compiling bpftool. Also copy the additional internal header file
(nlattr.h), but call it out explicitly. Build (and install headers) in a
subdirectory under bpftool/ instead of tools/lib/bpf/. When descending
from a parent Makefile, this is configurable by setting the OUTPUT,
LIBBPF_OUTPUT and LIBBPF_DESTDIR variables.
Also adjust the Makefile for BPF selftests, so as to reuse the (host)
libbpf compiled earlier and to avoid compiling a separate version of the
library just for bpftool.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
It seems that the header file was never necessary to compile bpftool,
and it is not part of the headers exported from libbpf. Let's remove the
includes from prog.c and gen.c.
Fixes: d510296d331a ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|