aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-10-10bootconfig: Rename xbc_destroy_all() to xbc_exit()Masami Hiramatsu1-1/+1
Avoid using this noisy name and use more calm one. This is just a name change. No functional change. Link: https://lkml.kernel.org/r/163187295918.2366983.5231840238429996027.stgit@devnote2 Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-10-10tools/bootconfig: Run test script when build allMasami Hiramatsu1-1/+1
Run the bootconfig test script when build all target so that user can notice any issue when build it. Link: https://lkml.kernel.org/r/163187295173.2366983.18295281097397499118.stgit@devnote2 Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-10-10bootconfig: Add xbc_get_info() for the node informationMasami Hiramatsu1-0/+1
Add xbc_get_info() API which allows user to get the number of used xbc_nodes and the size of bootconfig data. This is also useful for checking the bootconfig is initialized or not. Link: https://lkml.kernel.org/r/163177340877.682366.4360676589783197627.stgit@devnote2 Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-10-10bootconfig: Allocate xbc_data inside xbc_init()Masami Hiramatsu1-3/+3
Allocate 'xbc_data' in the xbc_init() so that it does not need to care about the ownership of the copied data. Link: https://lkml.kernel.org/r/163177339986.682366.898762699429769117.stgit@devnote2 Suggested-by: Steven Rostedt <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-10-10Merge tag 'objtool_urgent_for_v5.15_rc5' of ↵Linus Torvalds6-50/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: - Remove an extra section.len member in favour of section.sh_size - Align .altinstructions section creation with the kernel's by creating them with entry size of 0 - Fix objtool to convert a reloc symbol to a section offset and not to not warn about not knowing how * tag 'objtool_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Remove redundant 'len' field from struct section objtool: Make .altinstructions section entry size consistent objtool: Remove reloc symbol type checks in get_alt_entry()
2021-10-08selftests/bpf: Skip verifier tests that fail to load with ENOTSUPPIlya Leoshkevich1-1/+11
The verifier tests added in commit c48e51c8b07a ("bpf: selftests: Add selftests for module kfunc support") fail on s390, since the JIT does not support calling kernel functions. This is most likely an issue for all the other non-Intel arches, as well as on Intel with !CONFIG_DEBUG_INFO_BTF or !CONFIG_BPF_JIT. Trying to check for messages from all the possible add_kfunc_call() failure cases in test_verifier looks pointless, so do a much simpler thing instead: just like it's already done in do_prog_test_run(), skip the tests that fail to load with ENOTSUPP. Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08selftests/tls: add SM4 GCM/CCM to tls selftestsTianjia Zhang1-2/+26
Add new cipher as a variant of standard tls selftests. Signed-off-by: Tianjia Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-08selfetest/bpf: Make some tests serialYucong Sun38-38/+48
Change tests that often fails in parallel execution mode to serial. Signed-off-by: Yucong Sun <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08selftests/bpf: Fix pid check in fexit_sleep testYucong Sun1-2/+2
bpf_get_current_pid_tgid() returns u64, whose upper 32 bits are the same as userspace getpid() return value. Signed-off-by: Yucong Sun <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08selftests/bpf: Adding pid filtering for atomics testYucong Sun2-0/+17
This make atomics test able to run in parallel with other tests. Signed-off-by: Yucong Sun <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08selftests/bpf: Make cgroup_v1v2 use its own portYucong Sun2-2/+2
This patch change cgroup_v1v2 use a different port, avoid conflict with other tests. Signed-off-by: Yucong Sun <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08selftests/bpf: Fix race condition in enable_statsYucong Sun1-1/+1
In parallel execution mode, this test now need to use atomic operation to avoid race condition. Signed-off-by: Yucong Sun <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08selftests/bpf: Add per worker cgroup suffixYucong Sun2-4/+4
This patch make each worker use a unique cgroup base directory, thus allowing tests that uses cgroups to run concurrently. Signed-off-by: Yucong Sun <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08selftests/bpf: Allow some tests to be executed in sequenceYucong Sun1-6/+54
This patch allows tests to define serial_test_name() instead of test_name(), and this will make test_progs execute those in sequence after all other tests finished executing concurrently. Signed-off-by: Yucong Sun <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08selftests/bpf: Add parallelism to test_progsYucong Sun2-37/+610
This patch adds "-j" mode to test_progs, executing tests in multiple process. "-j" mode is optional, and works with all existing test selection mechanism, as well as "-v", "-l" etc. In "-j" mode, main process use UDS/SEQPACKET to communicate to each forked worker, commanding it to run tests and collect logs. After all tests are finished, a summary is printed. main process use multiple competing threads to dispatch work to worker, trying to keep them all busy. The test status will be printed as soon as it is finished, if there are error logs, it will be printed after the final summary line. By specifying "--debug", additional debug information on server/worker communication will be printed. Example output: > ./test_progs -n 15-20 -j [ 12.801730] bpf_testmod: loading out-of-tree module taints kernel. Launching 8 workers. #20 btf_split:OK #16 btf_endian:OK #18 btf_module:OK #17 btf_map_in_map:OK #19 btf_skc_cls_ingress:OK #15 btf_dump:OK Summary: 6/20 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Yucong Sun <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08bpf/selftests: Add test for writable bare tracepointHou Tao7-2/+83
Add a writable bare tracepoint in bpf_testmod module, and trigger its calling when reading /sys/kernel/bpf_testmod with a specific buffer length. The reading will return the value in writable context if the early return flag is enabled in writable context. Signed-off-by: Hou Tao <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08libbpf: Support detecting and attaching of writable tracepoint programHou Tao1-5/+21
Program on writable tracepoint is BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, but its attachment is the same as BPF_PROG_TYPE_RAW_TRACEPOINT. Signed-off-by: Hou Tao <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08bpftool: Add install-bin target to install binary onlyQuentin Monnet2-3/+5
With "make install", bpftool installs its binary and its bash completion file. Usually, this is what we want. But a few components in the kernel repository (namely, BPF iterators and selftests) also install bpftool locally before using it. In such a case, bash completion is not necessary and is just a useless build artifact. Let's add an "install-bin" target to bpftool, to offer a way to install the binary only. Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08selftests/bpf: Better clean up for runqslower in test_bpftool_build.shQuentin Monnet1-0/+4
The script test_bpftool_build.sh attempts to build bpftool in the various supported ways, to make sure nothing breaks. One of those ways is to run "make tools/bpf" from the root of the kernel repository. This command builds bpftool, along with the other tools under tools/bpf, and runqslower in particular. After running the command and upon a successful bpftool build, the script attempts to cleanup the generated objects. However, after building with this target and in the case of runqslower, the files are not cleaned up as expected. This is because the "tools/bpf" target sets $(OUTPUT) to .../tools/bpf/runqslower/ when building the tool, causing the object files to be placed directly under the runqslower directory. But when running "cd tools/bpf; make clean", the value for $(OUTPUT) is set to ".output" (relative to the runqslower directory) by runqslower's Makefile, and this is where the Makefile looks for files to clean up. We cannot easily fix in the root Makefile (where "tools/bpf" is defined) or in tools/scripts/Makefile.include (setting $(OUTPUT)), where changing the way the output variables are passed would likely have consequences elsewhere. We could change runqslower's Makefile to build in the repository instead of in a dedicated ".output/", but doing so just to accommodate a test script doesn't sound great. Instead, let's just make sure that we clean up runqslower properly by adding the correct command to the script. This will attempt to clean runqslower twice: the first try with command "cd tools/bpf; make clean" will search for tools/bpf/runqslower/.output and fail to clean it (but will still clean the other tools, in particular bpftool), the second one (added in this commit) sets the $(OUTPUT) variable like for building with the "tool/bpf" target and should succeed. Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08tools/runqslower: Install libbpf headers when buildingQuentin Monnet2-15/+22
API headers from libbpf should not be accessed directly from the library's source directory. Instead, they should be exported with "make install_headers". Let's make sure that runqslower installs the headers properly when building. We use a libbpf_hdrs target to mark the logical dependency on libbpf's headers export for a number of object files, even though the headers should have been exported at this time (since bpftool needs them, and is required to generate the skeleton or the vmlinux.h). When descending from a parent Makefile, the specific output directories for building the library and exporting the headers are configurable with BPFOBJ_OUTPUT and BPF_DESTDIR, respectively. This is in addition to OUTPUT, on top of which those variables are constructed by default. Also adjust the Makefile for the BPF selftests. We pass a number of variables to the "make" invocation, because we want to point runqslower to the (target) libbpf shared with other tools, instead of building its own version. In addition, runqslower relies on (target) bpftool, and we also want to pass the proper variables to its Makefile so that bpftool itself reuses the same libbpf. Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08tools/resolve_btfids: Install libbpf headers when buildingQuentin Monnet3-9/+18
API headers from libbpf should not be accessed directly from the library's source directory. Instead, they should be exported with "make install_headers". Let's make sure that resolve_btfids installs the headers properly when building. When descending from a parent Makefile, the specific output directories for building the library and exporting the headers are configurable with LIBBPF_OUT and LIBBPF_DESTDIR, respectively. This is in addition to OUTPUT, on top of which those variables are constructed by default. Also adjust the Makefile for the BPF selftests in order to point to the (target) libbpf shared with other tools, instead of building a version specific to resolve_btfids. Remove libbpf's order-only dependencies on the include directories (they are created by libbpf and don't need to exist beforehand). Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08bpftool: Install libbpf headers instead of including the dirQuentin Monnet2-12/+23
Bpftool relies on libbpf, therefore it relies on a number of headers from the library and must be linked against the library. The Makefile for bpftool exposes these objects by adding tools/lib as an include directory ("-I$(srctree)/tools/lib"). This is a working solution, but this is not the cleanest one. The risk is to involuntarily include objects that are not intended to be exposed by the libbpf. The headers needed to compile bpftool should in fact be "installed" from libbpf, with its "install_headers" Makefile target. In addition, there is one header which is internal to the library and not supposed to be used by external applications, but that bpftool uses anyway. Adjust the Makefile in order to install the header files properly before compiling bpftool. Also copy the additional internal header file (nlattr.h), but call it out explicitly. Build (and install headers) in a subdirectory under bpftool/ instead of tools/lib/bpf/. When descending from a parent Makefile, this is configurable by setting the OUTPUT, LIBBPF_OUTPUT and LIBBPF_DESTDIR variables. Also adjust the Makefile for BPF selftests, so as to reuse the (host) libbpf compiled earlier and to avoid compiling a separate version of the library just for bpftool. Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08bpftool: Remove unused includes to <bpf/bpf_gen_internal.h>Quentin Monnet2-2/+0
It seems that the header file was never necessary to compile bpftool, and it is not part of the headers exported from libbpf. Let's remove the includes from prog.c and gen.c. Fixes: d510296d331a ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.") Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08libbpf: Skip re-installing headers file if source is older than targetQuentin Monnet1-9/+18
The "install_headers" target in libbpf's Makefile would unconditionally export all API headers to the target directory. When those headers are installed to compile another application, this means that make always finds newer dependencies for the source files relying on those headers, and deduces that the targets should be rebuilt. Avoid that by making "install_headers" depend on the source header files, and (re-)install them only when necessary. Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08selftests/bpf: Fix btf_dump test under new clangYucong Sun4-9/+9
New clang version changed ([0]) type name in dwarf from "long int" to "long", this is causing btf_dump tests to fail. [0] https://github.com/llvm/llvm-project/commit/f6a561c4d6754b13165a49990e8365d819f64c86 Signed-off-by: Yucong Sun <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-08selftests: mlxsw: devlink_trap_tunnel_ipip: Send a full-length keyAmit Cohen1-2/+4
As part of adding same test for GRE tunnel with IPv6 underlay, missing bytes for key were found. mausezahn does not fill zeros between two colons, so send them explicitly. For example, use "00:00:00:E9:" instead of ":E9:" Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-08selftests: mlxsw: devlink_trap_tunnel_ipip: Remove code duplicationAmit Cohen1-27/+11
As part of adding same test for GRE tunnel with IPv6 underlay, an optional improvement was found - call ipip_payload_get from ecn_payload_get, so do not duplicate the code which creates the payload. Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-08selftests: mlxsw: devlink_trap_tunnel_ipip: Align topology drawing correctlyAmit Cohen1-3/+3
As part of adding same test for GRE tunnel with IPv6 underlay, wrong alignments were found, fix them. Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-08selftests: mlxsw: devlink_trap_tunnel_ipip6: Add test case for IPv6 decap_errorAmit Cohen1-0/+250
IPv6 underlay support was added, add test to check that "decap_error" trap is triggered under the right conditions and that devlink counters increase. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-08selftests: forwarding: Add IPv6 GRE hierarchical testsAmit Cohen4-1/+364
Add tests that check IPv6-in-IPv6, IPv4-in-IPv6 and MTU change of GRE tunnel. The tests use hierarchical model - the tunnel is bound to a device in a different VRF. These tests can be run with TC_FLAG=skip_sw, so then they will verify that packets go through hardware as part of enacp and decap phases. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-08selftests: forwarding: Add IPv6 GRE flat testsAmit Cohen4-0/+465
Add tests that check IPv6-in-IPv6, IPv4-in-IPv6 and MTU change of GRE tunnel. The tests use flat model - overlay and underlay share the same VRF. These tests can be run with TC_FLAG=skip_sw, so then they will verify that packets go through hardware as part of enacp and decap phases. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-08testing: selftests: tc_common: Add tc_check_at_least_x_packets()Amit Cohen1-0/+10
Add function that checks that at least X packets hit the tc rule. There are cases that it is not possible to catch only the interesting packets, so then, it is possible to send many packets and verify that at least this amount of packets hit the rule. This function will be used in the next patch for general tc rule that can be used to test both software and hardware. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-08testing: selftests: forwarding.config.sample: Add tc flagAmit Cohen1-0/+3
Add TC_FLAG value to tests topology. This flag supposed to be skip_sw/skip_hw which means do not filter by software/hardware. This can be useful for adding tests to forwarding directory, and be able to verify that packets go through the hardware. When the flag is not set or set to 'skip_hw', tests can still be executed with veth pairs. Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-07selftests/bpf: Remove SEC("version") from test progsDave Marchevsky40-61/+0
Since commit 6c4fc209fcf9d ("bpf: remove useless version check for prog load") these "version" sections, which result in bpf_attr.kern_version being set, have been unnecessary. Remove them so that it's obvious to folks using selftests as a guide that "modern" BPF progs don't need this section. Signed-off-by: Dave Marchevsky <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-07selftests/bpf: Skip the second half of get_branch_snapshot in vmSong Liu1-0/+34
VMs running on upstream 5.12+ kernel support LBR. However, bpf_get_branch_snapshot couldn't stop the LBR before too many entries are flushed. Skip the hit/waste test for VMs before we find a proper fix for LBR in VM. Fixes: 025bd7c753aa ("selftests/bpf: Add test for bpf_get_branch_snapshot") Signed-off-by: Song Liu <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski14-75/+542
No conflicts. Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-07Merge tag 'perf-tools-fixes-for-v5.15-2021-10-07' of ↵Linus Torvalds8-54/+445
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix plugin static linking with libopencsd on ARM and ARM64 - Add missing -lstdc++ when linking with libopencsd - Add missing topdown metrics events to 'perf test attr' - Plug leak sys_event_tables list after processing JSON vendor events entries - Sync sound/asound.h copy with the kernel sources * tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tests attr: Add missing topdown metrics events tools include UAPI: Sync sound/asound.h copy with the kernel sources perf build: Fix plugin static linking with libopencsd on ARM and ARM64 perf build: Add missing -lstdc++ when linking with libopencsd perf jevents: Free the sys_event_tables list after processing entries
2021-10-07Merge tag 'net-5.15-rc5' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from xfrm, bpf, netfilter, and wireless. Current release - regressions: - xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new value in the middle of an enum - unix: fix an issue in unix_shutdown causing the other end read/write failures - phy: mdio: fix memory leak Current release - new code bugs: - mlx5e: improve MQPRIO resiliency against bad configs Previous releases - regressions: - bpf: fix integer overflow leading to OOB access in map element pre-allocation - stmmac: dwmac-rk: fix ethernet on rk3399 based devices - netfilter: conntrack: fix boot failure with nf_conntrack.enable_hooks=1 - brcmfmac: revert using ISO3166 country code and 0 rev as fallback - i40e: fix freeing of uninitialized misc IRQ vector - iavf: fix double unlock of crit_lock Previous releases - always broken: - bpf, arm: fix register clobbering in div/mod implementation - netfilter: nf_tables: correct issues in netlink rule change event notifications - dsa: tag_dsa: fix mask for trunked packets - usb: r8152: don't resubmit rx immediately to avoid soft lockup on device unplug - i40e: fix endless loop under rtnl if FW fails to correctly respond to capability query - mlx5e: fix rx checksum offload coexistence with ipsec offload - mlx5: force round second at 1PPS out start time and allow it only in supported clock modes - phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable sequence Misc: - xfrm: slightly rejig the new policy uAPI to make it less cryptic" * tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) net: prefer socket bound to interface when not in VRF iavf: fix double unlock of crit_lock i40e: Fix freeing of uninitialized misc IRQ vector i40e: fix endless loop under rtnl dt-bindings: net: dsa: marvell: fix compatible in example ionic: move filter sync_needed bit set gve: report 64bit tx_bytes counter from gve_handle_report_stats() gve: fix gve_get_stats() rtnetlink: fix if_nlmsg_stats_size() under estimation gve: Properly handle errors in gve_assign_qpl gve: Avoid freeing NULL pointer gve: Correct available tx qpl check unix: Fix an issue in unix_shutdown causing the other end read/write failures net: stmmac: trigger PCS EEE to turn off on link down net: pcs: xpcs: fix incorrect steps on disable EEE netlink: annotate data races around nlk->bound net: pcs: xpcs: fix incorrect CL37 AN sequence net: sfp: Fix typo in state machine debug string net/sched: sch_taprio: properly cancel timer from taprio_destroy() net: bridge: fix under estimation in br_get_linkxstats_size() ...
2021-10-07Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski2-1/+3
Daniel Borkmann says: ==================== pull-request: bpf 2021-10-07 We've added 7 non-merge commits during the last 8 day(s) which contain a total of 8 files changed, 38 insertions(+), 21 deletions(-). The main changes are: 1) Fix ARM BPF JIT to preserve caller-saved regs for DIV/MOD JIT-internal helper call, from Johan Almbladh. 2) Fix integer overflow in BPF stack map element size calculation when used with preallocation, from Tatsuhiko Yasumatsu. 3) Fix an AF_UNIX regression due to added BPF sockmap support related to shutdown handling, from Jiang Wang. 4) Fix a segfault in libbpf when generating light skeletons from objects without BTF, from Kumar Kartikeya Dwivedi. 5) Fix a libbpf memory leak in strset to free the actual struct strset itself, from Andrii Nakryiko. 6) Dual-license bpf_insn.h similarly as we did for libbpf and bpftool, with ACKs from all contributors, from Luca Boccassi. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-07selftests: futex: Test sys_futex_waitv() wouldblockAndré Almeida1-4/+37
Test if futex_waitv() returns -EWOULDBLOCK correctly when the expected value is different from the actual value for a waiter. Signed-off-by: André Almeida <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07selftests: futex: Test sys_futex_waitv() timeoutAndré Almeida1-1/+20
Test if the futex_waitv timeout is working as expected, using the supported clockid options. Signed-off-by: André Almeida <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07selftests: futex: Add sys_futex_waitv() testAndré Almeida5-1/+265
Create a new file to test the waitv mechanism. Test both private and shared futexes. Wake the last futex in the array, and check if the return value from futex_waitv() is the right index. Signed-off-by: André Almeida <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07selftests: arm64: Add coverage of ptrace flags for SVE VL inheritanceMark Brown1-1/+54
Add a test that covers enabling and disabling of SVE vector length inheritance via the ptrace interface. Signed-off-by: Mark Brown <[email protected]> Acked-by: Catalin Marinas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2021-10-06objtool: Update section header before relocationsMichael Forney1-29/+17
The libelf implementation from elftoolchain has a safety check in gelf_update_rel[a] to check that the data corresponds to a section that has type SHT_REL[A] [0]. If the relocation is updated before the section header is updated with the proper type, this check fails. To fix this, update the section header first, before the relocations. Previously, the section size was calculated in elf_rebuild_reloc_section by counting the number of entries in the reloc_list. However, we now need the size during elf_write so instead keep a running total and add to it for every new relocation. [0] https://sourceforge.net/p/elftoolchain/mailman/elftoolchain-developers/thread/CAGw6cBtkZro-8wZMD2ULkwJ39J+tHtTtAWXufMjnd3cQ7XG54g@mail.gmail.com/ Signed-off-by: Michael Forney <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-06objtool: Check for gelf_update_rel[a] failuresMichael Forney1-2/+8
Otherwise, if these fail we end up with garbage data in the .rela.orc_unwind_ip section, leading to errors like ld: fs/squashfs/namei.o: bad reloc symbol index (0x7f16 >= 0x12) for offset 0x7f16d5c82cc8 in section `.orc_unwind_ip' Signed-off-by: Michael Forney <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07Merge branch 'objtool/urgent'Peter Zijlstra77-426/+1589
Fixup conflicts. # Conflicts: # tools/objtool/check.c
2021-10-06selftests/bpf: Switch to new bpf_object__next_{map,program} APIsHengqi Chen7-9/+9
Replace deprecated bpf_{map,program}__next APIs with newly added bpf_object__next_{map,program} APIs, so that no compilation warnings emit. Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-06libbpf: Deprecate bpf_{map,program}__{prev,next} APIs since v0.7Hengqi Chen3-12/+51
Deprecate bpf_{map,program}__{prev,next} APIs. Replace them with a new set of APIs named bpf_object__{prev,next}_{program,map} which follow the libbpf API naming convention ([0]). No functionality changes. [0] Closes: https://github.com/libbpf/libbpf/issues/296 Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-06libbpf: Deprecate bpf_object__unload() API since v0.6Hengqi Chen2-3/+6
BPF objects are not reloadable after unload. Users are expected to use bpf_object__close() to unload and free up resources in one operation. No need to expose bpf_object__unload() as a public API, deprecate it ([0]). Add bpf_object__unload() as an alias to internal bpf_object_unload() and replace all bpf_object__unload() uses to avoid compilation errors. [0] Closes: https://github.com/libbpf/libbpf/issues/290 Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-06selftest/bpf: Switch recursion test to use htab_map_delete_elemJiri Olsa2-11/+8
Currently the recursion test is hooking __htab_map_lookup_elem function, which is invoked both from bpf_prog and bpf syscall. But in our kernel build, the __htab_map_lookup_elem gets inlined within the htab_map_lookup_elem, so it's not trigered and the test fails. Fixing this by using htab_map_delete_elem, which is not inlined for bpf_prog calls (like htab_map_lookup_elem is) and is used directly as pointer for map_delete_elem, so it won't disappear by inlining. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/YVnfFTL/3T6jOwHI@krava
Powered by cgit, Gruvboxed by Blaster4385.