aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2023-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni37-162/+872
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Paolo Abeni <[email protected]>
2023-09-21perf test lock_contention.sh: Skip test if not enough CPUsVeronika Molnarova1-0/+6
Machines with less then 4 CPUs weren't consistently triggering lock events required for the test. Skip the test on those machines. The limit of 4 CPUs is set as it generates around 100 lock events for a test. Signed-off-by: Veronika Molnarova <[email protected]> Acked-by: Michael Petlan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-21perf test stat+shadow_stat.sh: Add threshold for rounding errorsVeronika Molnarova1-6/+24
The test was failing in specific scenarios due to imperfection of FP arithmetics. The `bc` command wasn't correctly rounding the result of division causing the failure. Replace the `bc` with `awk` which should work with more decimal places and add a threshold to catch any possible rounding errors. The acceptable rounding error is set to 0.01 when the test passes with a warning message. Signed-off-by: Veronika Molnarova <[email protected]> Acked-by: Michael Petlan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-21tools/power/x86/intel_pstate_tracer: python minimum versionDoug Smythies1-6/+6
Change the minimum python version from 2.7 to 3.6. Remove a 2.X backwards compatibility line. Signed-off-by: Doug Smythies <[email protected]> Acked-by: Srinivas Pandruvada <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Tested-by: Swapnil Sapkal <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-09-21Merge tag 'net-6.6-rc3' of ↵Linus Torvalds19-143/+726
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter and bpf. Current release - regressions: - bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE - netfilter: fix entries val in rule reset audit log - eth: stmmac: fix incorrect rxq|txq_stats reference Previous releases - regressions: - ipv4: fix null-deref in ipv4_link_failure - netfilter: - fix several GC related issues - fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP - eth: team: fix null-ptr-deref when team device type is changed - eth: i40e: fix VF VLAN offloading when port VLAN is configured - eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB Previous releases - always broken: - core: fix ETH_P_1588 flow dissector - mptcp: fix several connection hang-up conditions - bpf: - avoid deadlock when using queue and stack maps from NMI - add override check to kprobe multi link attach - hsr: properly parse HSRv1 supervisor frames. - eth: igc: fix infinite initialization loop with early XDP redirect - eth: octeon_ep: fix tx dma unmap len values in SG - eth: hns3: fix GRE checksum offload issue" * tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast() igc: Expose tx-usecs coalesce setting to user octeontx2-pf: Do xdp_do_flush() after redirects. bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI net: ena: Flush XDP packets on error. net/handshake: Fix memory leak in __sock_create() and sock_alloc_file() net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev' netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP netfilter: nf_tables: fix memleak when more than 255 elements expired netfilter: nf_tables: disable toggling dormant table state more than once vxlan: Add missing entries to vxlan_get_size() net: rds: Fix possible NULL-pointer dereference team: fix null-ptr-deref when team device type is changed net: bridge: use DEV_STATS_INC() net: hns3: add 5ms delay before clear firmware reset irq source net: hns3: fix fail to delete tc flower rules during reset issue net: hns3: only enable unicast promisc when mac table full net: hns3: fix GRE checksum offload issue net: hns3: add cmdq check for vf periodic service task net: stmmac: fix incorrect rxq|txq_stats reference ...
2023-09-21Merge tag 'fixes-2023-09-21' of ↵Linus Torvalds6-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock test fixes from Mike Rapoport: "Fix several compilation errors and warnings in memblock tests" * tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock tests: fix warning ‘struct seq_file’ declared inside parameter list memblock tests: fix warning: "__ALIGN_KERNEL" redefined memblock tests: Fix compilation errors.
2023-09-21Merge tag 'sound-6.6-rc3' of ↵Linus Torvalds4-12/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A large collection of fixes around this time. All small and mostly trivial fixes. - Lots of fixes for the new -Wformat-truncation warnings - A fix in ALSA rawmidi core regression and UMP handling - Series of Cirrus codec fixes - ASoC Intel and Realtek codec fixes - Usual HD- and USB-audio quirks and AMD ASoC quirks" * tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits) ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning ALSA: rawmidi: Fix NULL dereference at proc read ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful ASoC: SOF: Intel: MTL: Reduce the DSP init timeout ASoC: cs42l43: Add shared IRQ flag for shutters ASoC: imx-audmix: Fix return error with devm_clk_get() ASoC: hdaudio.c: Add missing check for devm_kstrdup ALSA: riptide: Fix -Wformat-truncation warning for longname string ALSA: cs4231: Fix -Wformat-truncation warning for longname string ALSA: ad1848: Fix -Wformat-truncation warning for longname string ALSA: hda: generic: Check potential mixer name string truncation ALSA: cmipci: Fix -Wformat-truncation warning ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names ALSA: firewire: Fix -Wformat-truncation warning for longname string ALSA: xen: Fix -Wformat-truncation warning ALSA: opti9x: Fix -Wformat-truncation warning ALSA: es1688: Fix -Wformat-truncation warning ALSA: cs4236: Fix -Wformat-truncation warning ...
2023-09-21RISC-V: selftests: Add CBO testsAndrew Jones4-12/+250
Add hwprobe test for Zicboz and its block size. Also, when Zicboz is present, test that cbo.zero may be issued and works. Additionally provide a command line option that enables testing that the Zicbom instructions cause SIGILL and also that cbo.zero causes SIGILL when Zicboz it's not present. The SIGILL tests require "opt-in" with a command line option because the RISC-V ISA does not require unimplemented standard opcodes to issue illegal-instruction exceptions (but hopefully most platforms do). Pinning the test to a subset of cpus with taskset will also restrict the hwprobe calls to that set. Signed-off-by: Andrew Jones <[email protected]> Reviewed-by: Xiao Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-09-21RISC-V: selftests: Convert hwprobe test to kselftest APIAndrew Jones1-34/+20
Returning (exiting with) negative exit codes isn't user friendly, because the user must output the exit code with the shell, convert it from its unsigned 8-bit value back to the negative value, and then look up where that comes from in the code (which may be multiple places). Use the kselftests TAP interface, instead. Signed-off-by: Andrew Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-09-21RISC-V: selftests: Statically link hwprobe testAndrew Jones1-1/+1
Statically linking makes it more convenient to copy the test to a minimal busybox environment. Signed-off-by: Andrew Jones <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-09-21KVM: riscv: selftests: Selectively filter-out AIA registersAnup Patel1-2/+21
Currently the AIA ONE_REG registers are reported by get-reg-list as new registers for various vcpu_reg_list configs whenever Ssaia is available on the host because Ssaia extension can only be disabled by Smstateen extension which is not always available. To tackle this, we should filter-out AIA ONE_REG registers only when Ssaia can't be disabled for a VCPU. Fixes: 477069398ed6 ("KVM: riscv: selftests: Add get-reg-list test") Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2023-09-21KVM: riscv: selftests: Fix ISA_EXT register handling in get-reg-listAnup Patel1-14/+21
Same set of ISA_EXT registers are not present on all host because ISA_EXT registers are visible to the KVM user space based on the ISA extensions available on the host. Also, disabling an ISA extension using corresponding ISA_EXT register does not affect the visibility of the ISA_EXT register itself. Based on the above, we should filter-out all ISA_EXT registers. Fixes: 477069398ed6 ("KVM: riscv: selftests: Add get-reg-list test") Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2023-09-20kselftest: Add new test for detecting unprobed Devicetree devicesNícolas F. R. A. Prado6-0/+177
Introduce a new kselftest to detect devices that were declared in the Devicetree, and are expected to be probed by a driver, but weren't. The test uses two lists: a list of compatibles that can match a Devicetree device to a driver, and a list of compatibles that should be ignored. The first is automatically generated by the dt-extract-compatibles script, and is run as part of building this test. The list of compatibles to ignore is a hand-crafted list to capture the few exceptions of compatibles that are expected to match a driver but not be bound to it. Signed-off-by: Nícolas F. R. A. Prado <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-09-20KVM: selftests: Assert that vasprintf() is successfulSean Christopherson1-1/+1
Assert that vasprintf() succeeds as the "returned" string is undefined on failure. Checking the result also eliminates the only warning with default options in KVM selftests, i.e. is the only thing getting in the way of compile with -Werror. lib/test_util.c: In function ‘strdup_printf’: lib/test_util.c:390:9: error: ignoring return value of ‘vasprintf’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result] 390 | vasprintf(&str, fmt, ap); | ^~~~~~~~~~~~~~~~~~~~~~~~ Don't bother capturing the return value, allegedly vasprintf() can only fail due to a memory allocation failure. Fixes: dfaf20af7649 ("KVM: arm64: selftests: Replace str_with_index with strdup_printf") Cc: Andrew Jones <[email protected]> Cc: Haibo Xu <[email protected]> Cc: Anup Patel <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Tested-by: Andrew Jones <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-09-20kselftest/alsa: pcm-test: Report cards declared in config but missingNícolas F. R. A. Prado3-47/+73
When parsing the configs, keep track of card configurations that match the current system but haven't matched any card, and report those as test failures as they represent that a card which was expected to be present on the system is missing. This allows the configuration files to not only be used to detect missing PCM devices (which is currently possible) but also that the soundcard hasn't been registered at all. Signed-off-by: Nícolas F. R. A. Prado <[email protected]> Reviewed-by: Jaroslav Kysela <[email protected]> Reviewed-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-09-20riscv: kselftests: Fix mm build by removing testcases subdirectoryAlexandre Ghiti5-5/+5
kselftests fails to build because the mm/testcases subdirectory is not created and then the compiler fails to output the binary there. So fix this by simply removing this subdirectory which is not very useful. Signed-off-by: Alexandre Ghiti <[email protected]> Reviewed-by: Charlie Jenkins <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-09-19perf jevents: fix no member named 'entries' issueXu Yang1-2/+2
The struct "pmu_events_table" has been changed after commit 2e255b4f9f41 (perf jevents: Group events by PMU, 2023-08-23). So there doesn't exist 'entries' in pmu_events_table anymore. This will align the members with that commit. Othewise, below errors will be printed when run jevent.py: pmu-events/pmu-events.c:5485:26: error: ‘struct pmu_metrics_table’ has no member named ‘entries’ 5485 | .entries = pmu_metrics__freescale_imx8dxl_sys, Signed-off-by: Xu Yang <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Tested-by: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-19selftests/proc: fixup proc-empty-vm test after KSM changesAlexey Dobriyan1-0/+1
/proc/${pid}/smaps_rollup is not empty file even if process's address space is empty, update the test. Link: https://lkml.kernel.org/r/725e041f-e9df-4f3d-b267-d4cd2774a78d@p183 Signed-off-by: Alexey Dobriyan <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Stefan Roesch <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-09-19selftests: link libasan statically for tests with -fsanitize=addressRyan Roberts2-2/+2
When dynamically linking, Address Sanitizer requires its library to be the first one to be loaded; this is apparently to ensure that every call to malloc is intercepted. If using LD_PRELOAD, those listed libraries will be loaded before the libraries listed in the program's ELF and will therefore violate this requirement, leading to the below failure and output from ASan. commit 58e2847ad2e6 ("selftests: line buffer test program's stdout") modified the kselftest runner to force line buffering by forcing the test programs to run through `stdbuf`. It turns out that stdbuf implements line buffering by injecting a library via LD_PRELOAD. Therefore selftests that use ASan started failing. Fix this by statically linking libasan in the affected test programs, using the `-static-libasan` option. Note this is already the default for Clang, but not got GCC. Test output sample for failing case: TAP version 13 1..3 # timeout set to 300 # selftests: openat2: openat2_test # ==4052==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD. not ok 1 selftests: openat2: openat2_test # exit=1 # timeout set to 300 # selftests: openat2: resolve_test # ==4070==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD. not ok 2 selftests: openat2: resolve_test # exit=1 Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ryan Roberts <[email protected]> Fixes: 58e2847ad2e6 ("selftests: line buffer test program's stdout") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-lkp/[email protected] Cc: David Hildenbrand <[email protected]> Cc: Florent Revest <[email protected]> Cc: Jérôme Glisse <[email protected]> Cc: John Hubbard <[email protected]> Cc: Mark Brown <[email protected]> Cc: Peter Xu <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Tom Rix <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-09-19iommufd: Fix spelling errors in commentsGuokaiXu2-2/+2
requres -> requires dramtically -> dramatically Link: https://lore.kernel.org/r/31680D47D9533D91+20230904023236.GA12494@xgk8823 Signed-off-by: GuokaiXu <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2023-09-19selftests/bpf: Check bpf_cubic_acked() is called via struct_opsSong Liu2-0/+5
Test bpf_tcp_ca (in test_progs) checks multiple tcp_congestion_ops. However, there isn't a test that verifies functions in the tcp_congestion_ops is actually called. Add a check to verify that bpf_cubic_acked is actually called during the test. Suggested-by: Martin KaFai Lau <[email protected]> Signed-off-by: Song Liu <[email protected]> Acked-by: Ilya Leoshkevich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-19selftests/bpf: Print log buffer for exceptions test only on failureKumar Kartikeya Dwivedi1-2/+3
Alexei reported seeing log messages for some test cases even though we just wanted to match the error string from the verifier. Move the printing of the log buffer to a guarded condition so that we only print it when we fail to match on the expected string in the log buffer, preventing unneeded output when running the test. Reported-by: Alexei Starovoitov <[email protected]> Fixes: d2a93715bfb0 ("selftests/bpf: Add tests for BPF exceptions") Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-09-18perf parse-events: Fix tracepoint name memory leakIan Rogers1-0/+1
Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 #15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c3f48e ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <[email protected]> Cc: He Kuang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-18perf test: Detect off-cpu support from build optionsIan Rogers1-1/+1
Use perf version to detect whether BPF skeletons were enabled in a build rather than a failing perf record. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Namhyung Kim <[email protected]> Cc: James Clark <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Nick Terrell <[email protected]> Cc: Patrice Duroux <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-18perf test: Ensure EXTRA_TESTS is covered in build testIan Rogers1-0/+1
Add to run variable. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Namhyung Kim <[email protected]> Cc: James Clark <[email protected]> Cc: Nick Terrell <[email protected]> Cc: Patrice Duroux <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-18perf test: Update build test for changed BPF skeleton defaultsIan Rogers1-3/+3
Fix a target name and set BUILD_BPF_SKEL to 0 rather than 1. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Namhyung Kim <[email protected]> Cc: James Clark <[email protected]> Cc: Nick Terrell <[email protected]> Cc: Patrice Duroux <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-18perf build: Default BUILD_BPF_SKEL, warn/disable for missing depsIan Rogers2-33/+53
LIBBPF is dependent on zlib so move the NO_ZLIB and feature check early to avoid statically building when zlib is disabled. This avoids a linkage failure with perf and static libbpf when zlib isn't specified. Move BUILD_BPF_SKEL logic to one place and if not defined set BUILD_BPF_SKEL to 1. Detect dependencies of building with BPF skeletons and warn/disable if the dependencies aren't present. Change Makefile.perf to contain BPF skeleton logic dependent on the Makefile.config result and refresh the comment about BUILD_BPF_SKEL. Signed-off-by: Ian Rogers <[email protected]> Tested-by: Namhyung Kim <[email protected]> Cc: James Clark <[email protected]> Cc: Nick Terrell <[email protected]> Cc: Patrice Duroux <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-18perf version: Add status of bpf skeletonsIan Rogers1-0/+1
Add status for BPF skeletons, to see if a build has them enabled: ``` $ perf version --build-options perf version 6.6.rc1.g0381ae36d1a6 dwarf: [ OFF ] # HAVE_DWARF_SUPPORT dwarf_getlocations: [ OFF ] # HAVE_DWARF_GETLOCATIONS_SUPPORT syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT libbfd: [ OFF ] # HAVE_LIBBFD_SUPPORT debuginfod: [ OFF ] # HAVE_DEBUGINFOD_SUPPORT libelf: [ OFF ] # HAVE_LIBELF_SUPPORT libnuma: [ OFF ] # HAVE_LIBNUMA_SUPPORT numa_num_possible_cpus: [ OFF ] # HAVE_LIBNUMA_SUPPORT libperl: [ on ] # HAVE_LIBPERL_SUPPORT libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT libslang: [ on ] # HAVE_SLANG_SUPPORT libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT libunwind: [ OFF ] # HAVE_LIBUNWIND_SUPPORT libdw-dwarf-unwind: [ OFF ] # HAVE_DWARF_SUPPORT zlib: [ on ] # HAVE_ZLIB_SUPPORT lzma: [ on ] # HAVE_LZMA_SUPPORT get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT bpf: [ OFF ] # HAVE_LIBBPF_SUPPORT aio: [ on ] # HAVE_AIO_SUPPORT zstd: [ on ] # HAVE_ZSTD_SUPPORT libpfm4: [ on ] # HAVE_LIBPFM libtraceevent: [ on ] # HAVE_LIBTRACEEVENT bpf_skeletons: [ OFF ] # HAVE_BPF_SKEL ``` Signed-off-by: Ian Rogers <[email protected]> Tested-by: Namhyung Kim <[email protected]> Cc: James Clark <[email protected]> Cc: Nick Terrell <[email protected]> Cc: Patrice Duroux <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-18perf kwork top: Simplify bool conversionYang Li1-1/+1
./tools/perf/util/bpf_kwork_top.c:120:53-58: WARNING: conversion to bool not needed here Signed-off-by: Yang Li <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-18cgroup/cpuset: Extend test_cpuset_prs.sh to test remote partitionWaiman Long1-141/+317
This patch extends the test_cpuset_prs.sh test script to support testing the new remote partition type and the new "cpuset.cpus.exclusive" and "cpuset.cpus.exclusive.effective" control files by adding new tests for them. In addition, the following changes are also made: 1) Run the state transition tests directly under root to ease testing of remote partition and remove the unneeded test column. 2) Add a column to for the list of expected isolated CPUs and compare it with the actual value by looking at the state of /sys/kernel/debug/sched/domains which will be available if the verbose flag is set. Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2023-09-18selftests/user_events: Fix to unmount tracefs when test created mountBeau Belgrave5-9/+34
Fix to unmount tracefs if the self-test mounted it to allow testing. If tracefs was already mounted, this does nothing. Suggested-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Fixes: a06023a8f78d ("selftests/user_events: Fix failures when user_events is not installed") Signed-off-by: Beau Belgrave <[email protected]> Reviewed-by: Mark Brown <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2023-09-18kselftest: rtnetlink: add pause and pause on fail flagDaniel Mendes1-4/+23
'Pause' prompts the user to press Enter to continue running tests once one test has finished. Pause on fail on prompts the user to press enter only when a test fails. Modifications to kci_test_addrlft() and kci_test_ipsec_offload() ensure that whenever end_test is called, [$ret -ne 0] indicates failure. This allows end_test to really easily implement pause on fail functionality. Signed-off-by: Daniel Mendes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-18kselftest: rtnetlink.sh: add verbose flagDaniel Mendes1-581/+381
Uses a run_cmd helper function similar to other selftests to add verbose functionality i.e. print executed commands and their outputs Many commands silence or redirect output. This can be removed since the verbose helper function captures output anyway and only outputs it if VERBOSE is true. Similarly, the helper command for pipes to grep searches stderr and stdout. This makes output redirection unnecessary in those cases. Signed-off-by: Daniel Mendes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-18selftests: hsr: Extend the testsuite to also cover HSRv1.Sebastian Andrzej Siewior1-6/+17
The testsuite already has simply tests for HSRv0. The testuite would have been able to notice the v1 breakage if it was there at the time. Extend the testsuite to also cover HSRv1. Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-18selftests: hsr: Reorder the testsuite.Sebastian Andrzej Siewior1-123/+132
Move the code and group into functions so it will be easier to extend the test to HSRv1 so that both versions are covered. Move the ping/test part into do_complete_ping_test() and the interface setup into setup_hsr_interfaces(). Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-18selftests: hsr: Use `let' properly.Sebastian Andrzej Siewior1-1/+1
The timeout in the while loop is never subtracted due wrong usage of `let' leading to an endless loop if the former condition never gets true. Put the statement for let in quotes so it is parsed as a single statement. Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-18x86/tdx: Fix __noreturn build warning around __tdx_hypercall_failed()Kai Huang1-0/+1
LKP reported below build warning: vmlinux.o: warning: objtool: __tdx_hypercall+0x128: __tdx_hypercall_failed() is missing a __noreturn annotation The __tdx_hypercall_failed() function definition already has __noreturn annotation, but it turns out the __noreturn must be annotated to the function declaration. PeterZ explains: "FWIW, the reason being that... The point of noreturn is that the caller should know to stop generating code. For that the declaration needs the attribute, because call sites typically do not have access to the function definition in C." Add __noreturn annotation to the declaration of __tdx_hypercall_failed() to fix. It's not a bad idea to document the __noreturn nature at the definition site either, so keep the annotation at the definition. Note <asm/shared/tdx.h> is also included by TDX related assembly files. Include <linux/compiler_attributes.h> only in case of !__ASSEMBLY__ otherwise compiling assembly file would trigger build error. Also, following the objtool documentation, add __tdx_hypercall_failed() to "tools/objtool/noreturns.h". Fixes: c641cfb5c157 ("x86/tdx: Make TDX_HYPERCALL asm similar to TDX_MODULE_CALL") Reported-by: kernel test robot <[email protected]> Signed-off-by: Kai Huang <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
2023-09-17perf jevent: fix core dump on software events on s390Thomas Richter1-1/+1
Running commands such as # ./perf stat -e cs -- true Segmentation fault (core dumped) # ./perf stat -e cpu-clock-- true Segmentation fault (core dumped) # dump core. This should not happen as these events are defined even when no hardware PMU is available. Debugging this reveals this call chain: perf_pmus__find_by_type(type=1) +--> pmu_read_sysfs(core_only=false) +--> perf_pmu__find2(dirfd=3, name=0x152a113 "software") +--> perf_pmu__lookup(pmus=0x14f0568 <other_pmus>, dirfd=3, lookup_name=0x152a113 "software") +--> perf_pmu__find_events_table (pmu=0x1532130) Now the pmu is "software" and it tries to find a proper table generated by the pmu-event generation process for s390: # cd pmu-events/ # ./jevents.py s390 all /root/linux/tools/perf/pmu-events/arch |\ grep -E '^const struct pmu_table_entry' const struct pmu_table_entry pmu_events__cf_z10[] = { const struct pmu_table_entry pmu_events__cf_z13[] = { const struct pmu_table_entry pmu_metrics__cf_z13[] = { const struct pmu_table_entry pmu_events__cf_z14[] = { const struct pmu_table_entry pmu_metrics__cf_z14[] = { const struct pmu_table_entry pmu_events__cf_z15[] = { const struct pmu_table_entry pmu_metrics__cf_z15[] = { const struct pmu_table_entry pmu_events__cf_z16[] = { const struct pmu_table_entry pmu_metrics__cf_z16[] = { const struct pmu_table_entry pmu_events__cf_z196[] = { const struct pmu_table_entry pmu_events__cf_zec12[] = { const struct pmu_table_entry pmu_metrics__cf_zec12[] = { const struct pmu_table_entry pmu_events__test_soc_cpu[] = { const struct pmu_table_entry pmu_metrics__test_soc_cpu[] = { const struct pmu_table_entry pmu_events__test_soc_sys[] = { # However event "software" is not listed, as can be seen in the generated const struct pmu_events_map pmu_events_map[]. So in function perf_pmu__find_events_table(), the variable table is initialized to NULL, but never set to a proper value. The function scans all generated &pmu_events_map[] tables, but no table matches, because the tables are s390 CPU Measurement unit specific: i = 0; for (;;) { const struct pmu_events_map *map = &pmu_events_map[i++]; if (!map->arch) break; --> the maps are there because the build generated them if (!strcmp_cpuid_str(map->cpuid, cpuid)) { table = &map->event_table; break; } --> Since no matching CPU string the table var remains 0x0 } free(cpuid); if (!pmu) return table; --> The pmu is "software" so it exists and no return --> and here perf dies because table is 0x0 for (i = 0; i < table->num_pmus; i++) { ... } return NULL; Fix this and do not access the table variable. Instead return 0x0 which is the same return code when the for-loop was not successful. Output after: # ./perf stat -e cs -- true Performance counter stats for 'true': 0 cs 0.000853105 seconds time elapsed 0.000061000 seconds user 0.000827000 seconds sys # ./perf stat -e cpu-clock -- true Performance counter stats for 'true': 0.25 msec cpu-clock # 0.341 CPUs utilized 0.000728383 seconds time elapsed 0.000055000 seconds user 0.000706000 seconds sys # ./perf stat -e cycles -- true Performance counter stats for 'true': <not supported> cycles 0.000767298 seconds time elapsed 0.000055000 seconds user 0.000739000 seconds sys # Fixes: 7c52f10c0d4d8 ("perf pmu: Cache JSON events table") Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-17perf pmu: Ensure all alias variables are initializedIan Rogers1-1/+1
Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 #1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 #2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 #3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 #4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 #5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 #6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 #7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 #8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 #9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 #10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 #11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 #12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 #13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 #14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 #15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 #16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 #17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723dbb96e8 ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Kan Liang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-17perf jevents metric: Fix type of strcmp_cpuid_strIan Rogers1-2/+2
The parser wraps all strings as Events, so the input is an Event. Using a string would be bad as functions like Simplify are called on the arguments, which wouldn't be present on a string. Fixes: 9d5da30e4ae9 ("perf jevents: Add a new expression builtin strcmp_cpuid_str()") Signed-off-by: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Kajol Jain <[email protected]> Cc: John Garry <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-17perf trace: Avoid compile error wrt redefining boolIan Rogers1-0/+2
Make part of an existing TODO conditional to avoid the following build error: ``` tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c:26:14: error: cannot combine with previous 'char' declaration specifier 26 | typedef char bool; | ^ include/stdbool.h:20:14: note: expanded from macro 'bool' 20 | #define bool _Bool | ^ tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c:26:1: error: typedef requires a name [-Werror,-Wmissing-declarations] 26 | typedef char bool; | ^~~~~~~~~~~~~~~~~ 2 errors generated. ``` Signed-off-by: Ian Rogers <[email protected]> Cc: Leo Yan <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-17perf bpf-prologue: Remove unused fileIan Rogers1-508/+0
Commit 3d6dfae88917 ("perf parse-events: Remove BPF event support") removed building bpf-prologue.c but failed to remove the actual file. Fixes: 3d6dfae88917 ("perf parse-events: Remove BPF event support") Signed-off-by: Ian Rogers <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
2023-09-17Merge tag 'objtool-urgent-2023-09-17' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "Fix a cold functions related false-positive objtool warning that triggers on Clang" * tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix _THIS_IP_ detection for cold functions
2023-09-17vsock/test: track bytes in sk_buff merging test for SOCK_SEQPACKETStefano Garzarella1-3/+11
The test was a bit complicated to read. Added variables to keep track of the bytes read and to be read in each step. Also some comments. The test is unchanged. Signed-off-by: Stefano Garzarella <[email protected]> Reviewed-by: Arseniy Krasnov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-17vsock/test: use send_buf() in vsock_test.cStefano Garzarella1-66/+9
We have a very common pattern used in vsock_test that we can now replace with the new send_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all the bytes to be sent with an appropriate timeout. Signed-off-by: Stefano Garzarella <[email protected]> Reviewed-by: Arseniy Krasnov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-17vsock/test: add send_buf() utility functionStefano Garzarella2-36/+56
Move the code of send_byte() out in a new utility function that can be used to send a generic buffer. This new function can be used when we need to send a custom buffer and not just a single 'A' byte. Signed-off-by: Stefano Garzarella <[email protected]> Reviewed-by: Arseniy Krasnov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-17vsock/test: use recv_buf() in vsock_test.cStefano Garzarella1-87/+17
We have a very common pattern used in vsock_test that we can now replace with the new recv_buf(). This allows us to reuse the code we already had to check the actual return value and wait for all bytes to be received with an appropriate timeout. Signed-off-by: Stefano Garzarella <[email protected]> Reviewed-by: Arseniy Krasnov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-17vsock/test: add recv_buf() utility functionStefano Garzarella2-35/+54
Move the code of recv_byte() out in a new utility function that can be used to receive a generic buffer. This new function can be used when we need to receive a custom buffer and not just a single 'A' byte. Signed-off-by: Stefano Garzarella <[email protected]> Reviewed-by: Arseniy Krasnov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-17Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller45-365/+3585
Alexei Starovoitov says: ==================== The following pull-request contains BPF updates for your *net-next* tree. We've added 73 non-merge commits during the last 9 day(s) which contain a total of 79 files changed, 5275 insertions(+), 600 deletions(-). The main changes are: 1) Basic BTF validation in libbpf, from Andrii Nakryiko. 2) bpf_assert(), bpf_throw(), exceptions in bpf progs, from Kumar Kartikeya Dwivedi. 3) next_thread cleanups, from Oleg Nesterov. 4) Add mcpu=v4 support to arm32, from Puranjay Mohan. 5) Add support for __percpu pointers in bpf progs, from Yonghong Song. 6) Fix bpf tailcall interaction with bpf trampoline, from Leon Hwang. 7) Raise irq_work in bpf_mem_alloc while irqs are disabled to improve refill probabablity, from Hou Tao. Please consider pulling these changes from: git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git Thanks a lot! Also thanks to reporters, reviewers and testers of commits in this pull-request: Alan Maguire, Andrey Konovalov, Dave Marchevsky, "Eric W. Biederman", Jiri Olsa, Maciej Fijalkowski, Quentin Monnet, Russell King (Oracle), Song Liu, Stanislav Fomichev, Yonghong Song ==================== Signed-off-by: David S. Miller <[email protected]>
2023-09-16perf test: Fix test-record-dummy-C0 failure for supported PERF_FORMAT_LOST ↵Yang Jihong1-1/+1
feature kernel For kernel that supports PERF_FORMAT_LOST, attr->read_format has PERF_FORMAT_LOST bit. Update expected value of attr->read_format of test-record-dummy-C0 for this scenario. Before: # ./perf test 17 -vv 17: Setup struct perf_event_attr : --- start --- test child forked, pid 1609441 <SNIP> running './tests/attr/test-record-dummy-C0' 'PERF_TEST_ATTR=/tmp/tmpm3s60aji ./perf record -o /tmp/tmpm3s60aji/perf.data --no-bpf-event -e dummy -C 0 kill >/dev/null 2>&1' ret '1', expected '1' expected read_format=4, got 20 FAILED './tests/attr/test-record-dummy-C0' - match failure test child finished with -1 ---- end ---- Setup struct perf_event_attr: FAILED! After: # ./perf test 17 -vv 17: Setup struct perf_event_attr : --- start --- test child forked, pid 1609441 <SNIP> running './tests/attr/test-record-dummy-C0' 'PERF_TEST_ATTR=/tmp/tmppa9vxcb7 ./perf record -o /tmp/tmppa9vxcb7/perf.data --no-bpf-event -e dummy -C 0 kill >/dev/null 2>&1' ret '1', expected '1' <SNIP> test child finished with 0 ---- end ---- Setup struct perf_event_attr: Ok Reported-and-Tested-by: Namhyung Kim <[email protected]> Signed-off-by: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.