aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-02-08tools/resolve_btfids: Build libbpf and libsubcmd in separate directoriesJiri Olsa2-17/+11
Setting up separate build directories for libbpf and libpsubcmd, so it's separated from other objects and we don't get them mixed in the future. It also simplifies cleaning, which is now simple rm -rf. Also there's no need for FEATURE-DUMP.libbpf and bpf_helper_defs.h files in .gitignore anymore. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-08bpf: Simplify bool comparisonJiapeng Chong1-1/+1
Fix the following coccicheck warning: ./tools/bpf/bpf_dbg.c:893:32-36: WARNING: Comparison to bool. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/1612777416-34339-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-02-08selftests/bpf: Add missing cleanup in atomic_bounds testBrendan Jackman1-0/+2
Add missing skeleton destroy call. Fixes: 37086bfdc737 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH") Reported-by: Yonghong Song <[email protected]> Signed-off-by: Brendan Jackman <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-08selftests/bpf: Remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./tools/testing/selftests/bpf/test_flow_dissector.c:506:2-3: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-08selftests: netdevsim: Test route offload failure notificationsAmit Cohen1-2/+132
Add cases to verify that when debugfs variable "fail_route_offload" is set, notification with "rt_offload_failed" flag is received. Extend the existing cases to verify that when sysctl "fib_notify_on_flag_change" is set to 2, the kernel emits notifications only for failed route installation. $ ./fib_notifications.sh TEST: IPv4 route addition [ OK ] TEST: IPv4 route deletion [ OK ] TEST: IPv4 route replacement [ OK ] TEST: IPv4 route offload failed [ OK ] TEST: IPv6 route addition [ OK ] TEST: IPv6 route deletion [ OK ] TEST: IPv6 route replacement [ OK ] TEST: IPv6 route offload failed [ OK ] Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-08selftests/timens: add futex binary to .gitignoreTobias Klauser1-0/+1
Add the futex test binary introduced by commit a4fd8414659b ("selftests/timens: Add a test for futex()") to .gitignore. Signed-off-by: Tobias Klauser <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08selftests: breakpoints: Use correct error messages in breakpoint_test_arm64.cTiezhu Yang1-2/+2
When call ptrace(PTRACE_CONT, ...) failed, use correct error messages. Signed-off-by: Tiezhu Yang <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08selftests/vDSO: fix ABI selftest on riscvTobias Klauser1-1/+3
Only older versions of the RISC-V GCC toolchain define __riscv__. Check for __riscv as well, which is used by newer GCC toolchains. Also set VDSO_32BIT based on __riscv_xlen. Before (on riscv64): $ ./vdso_test_abi [vDSO kselftest] VDSO_VERSION: LINUX_4 Could not find __vdso_gettimeofday Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_REALTIME [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_BOOTTIME [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_TAI [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_REALTIME_COARSE [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_MONOTONIC [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_MONOTONIC_RAW [PASS] Could not find __vdso_clock_gettime Could not find __vdso_clock_getres clock_id: CLOCK_MONOTONIC_COARSE [PASS] Could not find __vdso_time After (on riscv32): $ ./vdso_test_abi [vDSO kselftest] VDSO_VERSION: LINUX_4.15 The time is 1612449376.015086 The time is 1612449376.18340784 The resolution is 0 1 clock_id: CLOCK_REALTIME [PASS] The time is 774.842586182 The resolution is 0 1 clock_id: CLOCK_BOOTTIME [PASS] The time is 1612449376.22536565 The resolution is 0 1 clock_id: CLOCK_TAI [PASS] The time is 1612449376.20885172 The resolution is 0 4000000 clock_id: CLOCK_REALTIME_COARSE [PASS] The time is 774.845491269 The resolution is 0 1 clock_id: CLOCK_MONOTONIC [PASS] The time is 774.849534200 The resolution is 0 1 clock_id: CLOCK_MONOTONIC_RAW [PASS] The time is 774.842139684 The resolution is 0 4000000 clock_id: CLOCK_MONOTONIC_COARSE [PASS] Could not find __vdso_time Signed-off-by: Tobias Klauser <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Acked-by: Palmer Dabbelt <[email protected]> Acked-by: Vincenzo Frascino <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08selftests/x86/ldt_gdt: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./tools/testing/selftests/x86/ldt_gdt.c:610:2-3: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08selftests/ipc: remove unneeded semicolonYang Li1-3/+3
Eliminate the following coccicheck warning: ./tools/testing/selftests/ipc/msgque.c:72:3-4: Unneeded semicolon ./tools/testing/selftests/ipc/msgque.c:183:2-3: Unneeded semicolon ./tools/testing/selftests/ipc/msgque.c:191:2-3: Unneeded semicolon Signed-off-by: Yang Li <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kselftests: dmabuf-heaps: Add extra checking that allocated buffers are zeroedJohn Stultz1-0/+86
Add a check to validate that buffers allocated from the heaps are properly zeroed before being given to userland. It is done by allocating a number of buffers, and filling them with a nonzero pattern, then closing and reallocating more buffers and checking that they are all properly zeroed. This is helpful to validate any cached buffers are zeroed before being given back out. Cc: Shuah Khan <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Laura Abbott <[email protected]> Cc: Hridya Valsaraju <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Sandeep Patil <[email protected]> Cc: Daniel Mentz <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: John Stultz <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kselftests: dmabuf-heaps: Cleanup test outputJohn Stultz1-23/+21
Cleanup the test output so it is a bit easier to read Cc: Shuah Khan <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Laura Abbott <[email protected]> Cc: Hridya Valsaraju <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Sandeep Patil <[email protected]> Cc: Daniel Mentz <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: John Stultz <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kselftests: dmabuf-heaps: Softly fail if don't find a vgem deviceJohn Stultz1-8/+7
While testing against a vgem device is helpful for testing importing they aren't always configured in, so don't make it a fatal failure. Cc: Shuah Khan <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Laura Abbott <[email protected]> Cc: Hridya Valsaraju <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Sandeep Patil <[email protected]> Cc: Daniel Mentz <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: John Stultz <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kselftests: dmabuf-heaps: Add clearer checks on DMABUF_BEGIN/END_SYNCJohn Stultz1-7/+13
Add logic to check the dmabuf sync calls succeed. Cc: Shuah Khan <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Laura Abbott <[email protected]> Cc: Hridya Valsaraju <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Sandeep Patil <[email protected]> Cc: Daniel Mentz <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: John Stultz <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kselftests: dmabuf-heaps: Fix Makefile's inclusion of the kernel's ↵John Stultz1-1/+1
usr/include dir Copied in from somewhere else, the makefile was including the kerne's usr/include dir, which caused the asm/ioctl.h file to be used. Unfortunately, that file has different values for _IOC_SIZEBITS and _IOC_WRITE than include/uapi/asm-generic/ioctl.h which then causes the _IOCW macros to give the wrong ioctl numbers, specifically for DMA_BUF_IOCTL_SYNC. This patch simply removes the extra include from the Makefile Cc: Shuah Khan <[email protected]> Cc: Brian Starkey <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Laura Abbott <[email protected]> Cc: Hridya Valsaraju <[email protected]> Cc: Suren Baghdasaryan <[email protected]> Cc: Sandeep Patil <[email protected]> Cc: Daniel Mentz <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Fixes: a8779927fd86c ("kselftests: Add dma-heap test") Signed-off-by: John Stultz <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08selftests: tc-testing: u32: Add tests covering sample optionPhil Sutter1-0/+46
Kernel's key folding basically consists of shifting away least significant zero bits in mask and masking the resulting value with (divisor - 1). Test for u32's 'sample' option to behave identical. Suggested-by: Jamal Hadi Salim <[email protected]> Signed-off-by: Phil Sutter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-08kunit: tool: fix unintentional statefulness in run_kernel()Daniel Latypov1-1/+3
This is a bug that has been present since the first version of this code. Using [] as a default parameter is dangerous, since it's mutable. Example using the REPL: >>> def bad(param = []): ... param.append(len(param)) ... print(param) ... >>> bad() [0] >>> bad() [0, 1] This wasn't a concern in the past since it would just keep appending the same values to it. E.g. before, `args` would just grow in size like: [mem=1G', 'console=tty'] [mem=1G', 'console=tty', mem=1G', 'console=tty'] But with now filter_glob, this is more dangerous, e.g. run_kernel(filter_glob='my-test*') # default modified here run_kernel() # filter_glob still applies here! That earlier `filter_glob` will affect all subsequent calls that don't specify `args`. Note: currently the kunit tool only calls run_kernel() at most once, so it's not possible to trigger any negative side-effects right now. Fixes: 6ebf5866f2e8 ("kunit: tool: add Python wrappers for running KUnit tests") Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kunit: tool: add support for filtering suites by globDaniel Latypov3-12/+28
This allows running different subsets of tests, e.g. $ ./tools/testing/kunit/kunit.py build $ ./tools/testing/kunit/kunit.py exec 'list*' $ ./tools/testing/kunit/kunit.py exec 'kunit*' This passes the "kunit_filter.glob" commandline option to the UML kernel, which currently only supports filtering by suite name. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08selftests/net: so_txtime: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./tools/testing/selftests/net/so_txtime.c:199:3-4: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-08kunit: make kunit_tool accept optional path to .kunitconfig fragmentDaniel Latypov3-7/+46
Currently running tests via KUnit tool means tweaking a .kunitconfig file, which you'd keep around locally and never commit. This changes makes it so users can pass in a path to a kunitconfig. One of the imagined use cases is having kunitconfig fragments in-tree to formalize interesting sets of tests for features/subsystems, e.g. $ ./tools/testing/kunit/kunit.py run --kunticonfig=fs/ext4/kunitconfig For now, this hypothetical fs/ext4/kunitconfig would contain CONFIG_KUNIT=y CONFIG_EXT4_FS=y CONFIG_EXT4_KUNIT_TESTS=y At the moment, it's not hard to manually whip up this file, but as more and more tests get added, this will get tedious. It also opens the door to documenting how to run all the tests relevant to a specific subsystem or feature as a simple one-liner. This can be seen as an analogue to tools/testing/selftests/*/config But in the case of KUnit, the tests live in the same directory as the code-under-test, so it feels more natural to allow the kunitconfig fragments to live anywhere. (Though, people could create a separate directory if wanted; this patch imposes no restrictions on the path). Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Tested-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kunit: tool: simplify kconfig is_subset_of() logicDaniel Latypov1-7/+6
Don't use an O(nm) algorithm* and make it more readable by using a dict. *Most obviously, it does a nested for-loop over the entire other config. A bit more subtle, it calls .entries(), which constructs a set from the list for _every_ outer iteration. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: Brendan Higgins <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08minor: kunit: tool: fix unit test so it can run from non-root dirDaniel Latypov1-36/+24
Also take this time to rename get_absolute_path() to test_data_path(). 1. the name is currently a lie. It gives relative paths, e.g. if I run from the same dir as the test file, it gives './test_data/<file>' See https://docs.python.org/3/reference/import.html#__file__, which doesn't stipulate that implementations provide absolute paths. 2. it's only used for generating paths to tools/testing/kunit/test_data/ So we can tersen things by making it less general. Cache the absolute path to the test data files per suggestion from [1]. Using relative paths, the tests break because of this code in kunit.py if get_kernel_root_path():         os.chdir(get_kernel_root_path()) [1] https://lore.kernel.org/linux-kselftest/CABVgOSnH0gz7z5JhRCGyG1wg0zDDBTLoSUCoB-gWMeXLgVTo2w@mail.gmail.com/ Fixes: 5578d008d9e0 ("kunit: tool: fix running kunit_tool from outside kernel tree") Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: Brendan Higgins <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kunit: tool: use `with open()` in unit testDaniel Latypov1-19/+14
The use of manual open() and .close() calls seems to be an attempt to keep the contents in scope. But Python doesn't restrict variables like that, so we can introduce new variables inside of a `with` and use them outside. Do so to make the code more Pythonic. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: Brendan Higgins <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kunit: tool: stop using bare asserts in unit testDaniel Latypov1-26/+24
Use self.assertEqual/assertNotEqual() instead. Besides being more appropriate in a unit test, it'll also give a better error message by show the unexpected values. Also * Delete redundant check of exception types. self.assertRaises does this. * s/kall/call. There's no reason to name it this way. * This is probably a misunderstanding from the docs which uses it since `mock.call` is in scope as `call`. Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: Brendan Higgins <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08kunit: tool: fix unit test cleanup handlingDaniel Latypov1-8/+6
* Stop leaking file objects. * Use self.addCleanup() to ensure we call cleanup functions even if setUp() fails. * use mock.patch.stopall instead of more error-prone manual approach Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: David Gow <[email protected]> Tested-by: Brendan Higgins <[email protected]> Acked-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-02-08bpf/benchs/bench_ringbufs: Remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./tools/testing/selftests/bpf/benchs/bench_ringbufs.c:322:2-3: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-08perf script: Support filtering by hex addressJin Yao5-1/+98
'perf script' supports '-S' or '--symbol' options to only list the records for these symbols. A symbol is typically a name or hex address. If it's hex address, it is the start address of one symbol. While it would be useful if we can filter trace records by any hex address (not only the start address of symbol). So now we support filtering trace records by more conditions, such as: - symbol name - start address of symbol - any hexadecimal address - address range The comparison order is defined as: 1. symbol name comparison 2. symbol start address comparison. 3. any hexadecimal address comparison. 4. address range comparison. The idea is if we can get a valid address from -S list, we add the address to addr_list for address comparison otherwise we still leave it to sym_list for symbol comparison. Some examples: root@kbl-ppc:~# ./perf script -S ffffffff9a477308 perf 8562 [000] 347303.578858: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [000] 347303.578860: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [000] 347303.578861: 11 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578903: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578905: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578906: 15 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [002] 347303.578952: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [002] 347303.578953: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) Filter the traced records by hex address ffffffff9a477308. root@kbl-ppc:~# ./perf script -S ffffffff9a4dd4ce,ffffffff9a4d2de9,ffffffff9a6bf9f4 perf 8562 [001] 347303.578911: 311706 cycles: ffffffff9a6bf9f4 __kmalloc_node+0x204 ([kernel.kallsyms]) perf 8562 [002] 347303.578960: 354477 cycles: ffffffff9a4d2de9 sched_setaffinity+0x49 ([kernel.kallsyms]) perf 8562 [003] 347303.579015: 450958 cycles: ffffffff9a4dd4ce dequeue_task_fair+0x1ae ([kernel.kallsyms]) Filter the traced records by hex address ffffffff9a4dd4ce, ffffffff9a4d2de9, ffffffff9a6bf9f4. root@kbl-ppc:~# ./perf script -S ffffffff9a477309 --addr-range 16 perf 8562 [000] 347303.578863: 291 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [001] 347303.578907: 411 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [002] 347303.578956: 462 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [003] 347303.579010: 497 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [004] 347303.579059: 429 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [005] 347303.579109: 408 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [006] 347303.579159: 460 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [007] 347303.579213: 436 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) Filter the traced records from address range [ffffffff9a477309, ffffffff9a477309 + 15]. root@kbl-ppc:~# ./perf script -S "ffffffff9b163046,rcu_nmi_exit" perf 8562 [004] 347303.579060: 12013 cycles: ffffffff9b163046 exc_nmi+0x166 ([kernel.kallsyms]) perf 8562 [007] 347303.579214: 12138 cycles: ffffffff9b165944 rcu_nmi_exit+0x34 ([kernel.kallsyms]) Filter by address + symbol Signed-off-by: Jin Yao <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08perf intlist: Change 'struct intlist' int member to 'unsigned long'Jin Yao3-17/+22
This is to let intlist support addresses as its payload. One potential problem is it can't support negative number. But so far, there is no such kind of use case. Signed-off-by: Jin Yao <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08tools/power/x86/intel-speed-select: Update version to 1.8Srinivas Pandruvada1-1/+1
Update version for changes released with v5.12 kernel release. Signed-off-by: Srinivas Pandruvada <[email protected]>
2021-02-08tools/power/x86/intel-speed-select: Add new command to get/set TRLSrinivas Pandruvada4-1/+83
Add a new command to get and set TRL (Turbo Ratio Limits). This will help users to get/set TRL, when the direct MSR access is removed. Signed-off-by: Srinivas Pandruvada <[email protected]>
2021-02-08tools/power/x86/intel-speed-select: Add new command turbo-modeSrinivas Pandruvada1-1/+61
Add a new command "turbo-mode", which allows to enable/disable turbo mode globally. This uses base-frequency as the max frequency when turbo-mode is disabled. This allows soft disable turbo mode without depending on kernel or BIOS. Signed-off-by: Srinivas Pandruvada <[email protected]>
2021-02-08perf stat: Use nftw() instead of ftw()Paul Cercueil1-4/+4
ftw() has been obsolete for about 12 years now. Committer notes: Further notes provided by the patch author: "NOTE: Not runtime-tested, I have no idea what I need to do in perf to test this. But at least it compiles now with my uClibc-based toolchain." I looked at the nftw()/ftw() man page and for the use made with cgroups in 'perf stat' the end result is equivalent. Fixes: bb1c15b60b98 ("perf stat: Support regex pattern in --for-each-cgroup") Signed-off-by: Paul Cercueil <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08perf tools: Update topdown documentation for Sapphire RapidsKan Liang1-4/+74
Update Topdown extension on Sapphire Rapids and how to collect the L2 events. Signed-off-by: Kan Liang <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08perf stat: Support L2 Topdown eventsKan Liang5-4/+149
The TMA method level 2 metrics is supported from the Intel Sapphire Rapids server, which expose four L2 Topdown metrics events to user space. There are eight L2 events in total. The other four L2 Topdown metrics events are calculated from the corresponding L1 and the exposed L2 events. Now, the --topdown prints the complete top-down metrics that supported by the CPU. For the Intel Sapphire Rapids server, there are 4 L1 events and 8 L2 events displyed in one line. Add a new option, --td-level, to display the top-down statistics that equal to or lower than the input level. The L2 event is marked only when both its L1 parent event and itself crosse the threshold. Here is an example: $ perf stat --topdown --td-level=2 --no-metric-only sleep 1 Topdown accuracy may decrease when measuring long periods. Please print the result regularly, e.g. -I1000 Performance counter stats for 'sleep 1': 16,734,390 slots 2,100,001 topdown-retiring # 12.6% retiring 2,034,376 topdown-bad-spec # 12.3% bad speculation 4,003,128 topdown-fe-bound # 24.1% frontend bound 328,125 topdown-heavy-ops # 2.0% heavy operations # 10.6% light operations 1,968,751 topdown-br-mispredict # 11.9% branch mispredict # 0.4% machine clears 2,953,127 topdown-fetch-lat # 17.8% fetch latency # 6.3% fetch bandwidth 5,906,255 topdown-mem-bound # 35.6% memory bound # 15.4% core bound Signed-off-by: Kan Liang <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08perf test: Support PERF_SAMPLE_WEIGHT_STRUCTKan Liang1-3/+11
Support the new sample type for sample-parsing test case. Signed-off-by: Kan Liang <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08perf report: Support instruction latencyKan Liang10-11/+81
The instruction latency information can be recorded on some platforms, e.g., the Intel Sapphire Rapids server. With both memory latency (weight) and the new instruction latency information, users can easily locate the expensive load instructions, and also understand the time spent in different stages. The users can optimize their applications in different pipeline stages. The 'weight' field is shared among different architectures. Reusing the 'weight' field may impacts other architectures. Add a new field to store the instruction latency. Like the 'weight' support, introduce a 'ins_lat' for the global instruction latency, and a 'local_ins_lat' for the local instruction latency version. Add new sort functions, INSTR Latency and Local INSTR Latency, accordingly. Add local_ins_lat to the default_mem_sort_order[]. Signed-off-by: Kan Liang <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08perf tools: Support PERF_SAMPLE_WEIGHT_STRUCTKan Liang8-10/+61
The new sample type, PERF_SAMPLE_WEIGHT_STRUCT, is an alternative of the PERF_SAMPLE_WEIGHT sample type. Users can apply either the PERF_SAMPLE_WEIGHT sample type or the PERF_SAMPLE_WEIGHT_STRUCT sample type to retrieve the sample weight, but they cannot apply both sample types simultaneously. The new sample type shares the same space as the PERF_SAMPLE_WEIGHT sample type. The lower 32 bits are exactly the same for both sample type. The higher 32 bits may be different for different architecture. Add arch specific arch_evsel__set_sample_weight() to set the new sample type for X86. Only store the lower 32 bits for the sample->weight if the new sample type is applied. In practice, no memory access could last than 4G cycles. No data will be lost. If the kernel doesn't support the new sample type. Fall back to the PERF_SAMPLE_WEIGHT sample type. There is no impact for other architectures. Committer notes: Fixup related to PERF_SAMPLE_CODE_PAGE_SIZE, present in acme/perf/core but not upstream yet. Signed-off-by: Kan Liang <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08perf c2c: Support data block and addr blockKan Liang3-0/+11
'perf c2c' is also a memory profiling tool. Apply the two new data source fields to 'perf c2c' as well. Extend 'perf c2c' to display the number of loads which blocked by data or address conflict. Signed-off-by: Kan Liang <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Don Zickus <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Joe Mario <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08perf tools: Support data block and addr blockKan Liang8-4/+70
Two new data source fields, to indicate the block reasons of a load instruction, are introduced on the Intel Sapphire Rapids server. The fields can be used by the memory profiling. Add a new sort function, SORT_MEM_BLOCKED, for the two fields. For the previous platforms or the block reason is unknown, print "N/A" for the block reason. Add blocked as a default mem sort key for perf report and perf mem report. Committer testing: So in machines without this capability we get a "N/A" filling the new "Blocked" column: $ perf mem record ls arch certs CREDITS Documentation include ipc Kconfig lib MAINTAINERS mm samples security usr block COPYING crypto drivers fs init Kbuild kernel LICENSES Makefile net README scripts sound tools virt [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.008 MB perf.data (17 samples) ] $ $ perf mem report --stdio # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 6 of event 'cpu/mem-loads,ldlat=30/Pu' # Total weight : 1381 # Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked # # Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked # ........ ....... ............ .................... ....................... ............. ...................... ............ ..... ............ ...... ....... # 32.87% 1 454 Local RAM or RAM hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91cef3078 libc-2.31.so Hit L1 or L2 hit No N/A 25.56% 1 353 LFB or LFB hit [.] strcmp ld-2.31.so [.] 0x00005586973855ca ls None L1 or L2 hit No N/A 22.59% 1 312 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0e3b18 ld.so.cache None L1 or L2 hit No N/A 8.47% 1 117 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceee570 libc-2.31.so None L1 or L2 hit No N/A 6.88% 1 95 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceed490 libc-2.31.so None L1 or L2 hit No N/A 3.62% 1 50 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0ebe60 ld.so.cache None L1 or L2 hit No N/A # Samples: 11 of event 'cpu/mem-stores/Pu' # Total weight : 11 # Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked # # Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked # ........ ....... ............ ............. ....................... ............. ...................... ........... ..... .......... ...... ....... # 9.09% 1 0 L1 hit [.] __strcoll_l libc-2.31.so [.] 0x00007fffe5648fc8 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] _dl_lookup_symbol_x ld-2.31.so [.] 0x00007fffe56490b8 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] _dl_name_match_p ld-2.31.so [.] 0x00007fffe56487d8 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] _dl_start ld-2.31.so [.] start_time+0x0 ld-2.31.so N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] _dl_sysdep_start ld-2.31.so [.] 0x00007fffe56494b8 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5648ff8 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649064 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649130 [stack] N/A N/A N/A N/A 9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xaf8 ld-2.31.so N/A N/A N/A N/A 9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xc28 ld-2.31.so N/A N/A N/A N/A 9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] 0x00007fffe56495b8 [stack] N/A N/A N/A N/A # (Tip: Show user configuration overrides: perf config --user --list) $ Signed-off-by: Kan Liang <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08perf tools: Support the auxiliary eventKan Liang7-1/+60
On the Intel Sapphire Rapids server, an auxiliary event has to be enabled simultaneously with the load latency event to retrieve complete Memory Info. Add X86 specific perf_mem_events__name() to handle the auxiliary event. - Users are only interested in the samples of the mem-loads event. Sample read the auxiliary event. - The auxiliary event must be in front of the load latency event in a group. Assume the second event to sample if the auxiliary event is the leader. - Add a weak is_mem_loads_aux_event() to check the auxiliary event for X86. For other ARCHs, it always return false. Parse the unique event name, mem-loads-aux, for the auxiliary event. Committer notes: According to 61b985e3e775a3a7 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids"), ENODATA is only returned by sys_perf_event_open() when used with these auxiliary events, with this in evsel__open_strerror(): case ENODATA: return scnprintf(msg, size, "Cannot collect data source with the load latency event alone. " "Please add an auxiliary event in front of the load latency event."); This is Ok at this point in time, but fragile long term, I pointed this out in the e-mail thread, requesting a follow up patch to check if ENODATA is really for this specific case. Fixed up sizeof(MEM_LOADS_AUX_NAME) bug pointed out by Namhyung. Signed-off-by: Kan Liang <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08tools headers uapi: Update tools's copy of linux/perf_event.hKan Liang1-4/+50
To get the changes in these csets: 2a6c6b7d7ad346f0 ("perf/core: Add PERF_SAMPLE_WEIGHT_STRUCT") 61b985e3e775a3a7 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids") This cures the following warning during perf's build: Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h' diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h Committer notes: Picked by hand as I had already merged the MMAP buildid patch that also touches perf_event.h and is also only in {acme,tip}/perf/core, not yet upstream. Signed-off-by: Kan Liang <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08perf powerpc: Support exposing Performance Monitor Counter SPRs as part of ↵Athira Rajeev3-6/+34
extended regs To enable presenting of Performance Monitor Counter Registers (PMC1 to PMC6) as part of extended regsiters, this patch adds these to sample_reg_mask in the tool side (to use with -I? option). Simplified the PERF_REG_PMU_MASK_300/31 definition. Excluded the unsupported SPRs (MMCR3, SIER2, SIER3) from extended mask value for CPU_FTR_ARCH_300. Signed-off-by: Athira Jajeev <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: [email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08perf probe: Add protection to avoid endless loopJianlin Lv1-2/+6
if dwarf_offdie() returns NULL, the continue statement forces the next iteration of the loop without updating the 'off' variable. It will cause an endless loop in the process of traversing the compile unit. So add exception protection for looping CUs. Signed-off-by: Jianlin Lv <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Srikar Dronamraju <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-08Merge tag 'linux-cpupower-5.12-rc1' of ↵Rafael J. Wysocki7-59/+62
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Pull cpupower utility update for v5.12-rc1 from Shuah Khan: "This cpupower update for Linux 5.12-rc1 consists of: - Updates to the cpupower command to add support for AMD family 0x19 and cleanup the code to remove many of the family checks to make future family updates easier. - Adding Makefile dependencies for install targets to allow building cpupower in parallel rather than serially." * tag 'linux-cpupower-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: cpupower: Add cpuid cap flag for MSR_AMD_HWCR support cpupower: Remove family arg to decode_pstates() cpupower: Condense pstate enabled bit checks in decode_pstates() cpupower: Update family checks when decoding HW pstates cpupower: Remove unused pscur variable. cpupower: Add CPUPOWER_CAP_AMD_HW_PSTATE cpuid caps flag cpupower: Correct macro name for CPB caps flag cpupower: Update msr_pstate union struct naming cpupower: add Makefile dependencies for install targets
2021-02-08module: remove EXPORT_UNUSED_SYMBOL*Christoph Hellwig1-2/+0
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the unused functionality as we generally just remove unused code anyway. Reviewed-by: Miroslav Benes <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jessica Yu <[email protected]>
2021-02-08module: remove EXPORT_SYMBOL_GPL_FUTUREChristoph Hellwig1-1/+0
As far as I can tell this has never been used at all, and certainly not any time recently. Reviewed-by: Miroslav Benes <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jessica Yu <[email protected]>
2021-02-07Merge tag 'libnvdimm-fixes-5.11-rc7' of ↵Linus Torvalds4-2/+1245
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A fix for a crash scenario that has been present since the initial merge, a minor regression in sysfs attribute visibility, and a fix for some flexible array warnings. The bulk of this pull is an update to the libnvdimm unit test infrastructure to test non-ACPI platforms. Given there is zero regression risk for test updates, and the tests enable validation of bits headed towards the next merge window, I saw no reason to hold the new tests back. Santosh originally submitted this before the v5.11 window opened. Summary: - Fix a crash when sysfs accesses race 'dimm' driver probe/remove. - Fix a regression in 'resource' attribute visibility necessary for mapping badblocks and other physical address interrogations. - Fix some flexible array warnings - Expand the unit test infrastructure for non-ACPI platforms" * tag 'libnvdimm-fixes-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/dimm: Avoid race between probe and available_slots_show() ndtest: Add papr health related flags ndtest: Add nvdimm control functions ndtest: Add regions and mappings to the test buses ndtest: Add dimm attributes ndtest: Add dimms to the two buses ndtest: Add compatability string to treat it as PAPR family testing/nvdimm: Add test module for non-nfit platforms libnvdimm/namespace: Fix visibility of namespace resource attribute libnvdimm/pmem: Remove unused header ACPI: NFIT: Fix flexible_array.cocci warnings
2021-02-07Merge tag 'dma-mapping-5.11-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+3
Pull dma-mapping fix from Christoph Hellwig: "Fix a 32 vs 64-bit padding issue in the new benchmark code (Barry Song)" * tag 'dma-mapping-5.11-2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: benchmark: use u8 for reserved field in uAPI structure
2021-02-07Merge tag 'core_urgent_for_v5.11_rc7' of ↵Linus Torvalds2-9/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull syscall entry fixes from Borislav Petkov: - For syscall user dispatch, separate prctl operation from syscall redirection range specification before the API has been made official in 5.11. - Ensure tasks using the generic syscall code do trap after returning from a syscall when single-stepping is requested. * tag 'core_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Use different define for selector variable in SUD entry: Ensure trap after single-step on system call return
2021-02-07Merge tag 'x86_urgent_for_v5.11_rc7' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "I hope this is the last batch of x86/urgent updates for this round: - Remove superfluous EFI PGD range checks which lead to those assertions failing with certain kernel configs and LLVM. - Disable setting breakpoints on facilities involved in #DB exception handling to avoid infinite loops. - Add extra serialization to non-serializing MSRs (IA32_TSC_DEADLINE and x2 APIC MSRs) to adhere to SDM's recommendation and avoid any theoretical issues. - Re-add the EPB MSR reading on turbostat so that it works on older kernels which don't have the corresponding EPB sysfs file. - Add Alder Lake to the list of CPUs which support split lock. - Fix %dr6 register handling in order to be able to set watchpoints with gdb again. - Disable CET instrumentation in the kernel so that gcc doesn't add ENDBR64 to kernel code and thus confuse tracing" * tag 'x86_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Remove EFI PGD build time checks x86/debug: Prevent data breakpoints on cpu_dr7 x86/debug: Prevent data breakpoints on __per_cpu_offset x86/apic: Add extra serialization for non-serializing MSRs tools/power/turbostat: Fallback to an MSR read for EPB x86/split_lock: Enable the split lock feature on another Alder Lake CPU x86/debug: Fix DR6 handling x86/build: Disable CET instrumentation in the kernel
Powered by cgit, Gruvboxed by Blaster4385.