aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2019-08-21tools: bpftool: show frozen status for mapsQuentin Monnet1-3/+27
When listing maps, read their "frozen" status from procfs, and tell if maps are frozen. As commit log for map freezing command mentions that the feature might be extended with flags (e.g. for write-only instead of read-only) in the future, use an integer and not a boolean for JSON output. Signed-off-by: Quentin Monnet <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-08-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds7-46/+53
Pull KVM fixes from Paolo Bonzini: "A couple bugfixes, and mostly selftests changes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: selftests/kvm: make platform_info_test pass on AMD Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot" selftests: kvm: fix state save/load on processors without XSAVE selftests: kvm: fix vmx_set_nested_state_test selftests: kvm: provide common function to enable eVMCS selftests: kvm: do not try running the VM in vmx_set_nested_state_test KVM: x86: svm: remove redundant assignment of var new_entry MAINTAINERS: add KVM x86 reviewers MAINTAINERS: change list for KVM/s390 kvm: x86: skip populating logical dest map if apic is not sw enabled
2019-08-21bpf: sync bpf.h to tools/Peter Wu1-3/+5
Fix a 'struct pt_reg' typo and clarify when bpf_trace_printk discards lines. Affects documentation only. Signed-off-by: Peter Wu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-08-21selftests/kvm: make platform_info_test pass on AMDVitaly Kuznetsov1-1/+1
test_msr_platform_info_disabled() generates EXIT_SHUTDOWN but VMCB state is undefined after that so an attempt to launch this guest again from test_msr_platform_info_enabled() fails. Reorder the tests to make test pass. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-08-21selftests/bpf: install files test_xdp_vlan.shAnders Roxell1-1/+2
When ./test_xdp_vlan_mode_generic.sh runs it complains that it can't find file test_xdp_vlan.sh. # selftests: bpf: test_xdp_vlan_mode_generic.sh # ./test_xdp_vlan_mode_generic.sh: line 9: ./test_xdp_vlan.sh: No such file or directory Rework so that test_xdp_vlan.sh gets installed, added to the variable TEST_PROGS_EXTENDED. Fixes: d35661fcf95d ("selftests/bpf: add wrapper scripts for test_xdp_vlan.sh") Signed-off-by: Anders Roxell <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-08-21selftests/bpf: add config fragment BPF_JITAnders Roxell1-0/+1
When running test_kmod.sh the following shows up # sysctl cannot stat /proc/sys/net/core/bpf_jit_enable No such file or directory cannot: stat_/proc/sys/net/core/bpf_jit_enable # # sysctl cannot stat /proc/sys/net/core/bpf_jit_harden No such file or directory cannot: stat_/proc/sys/net/core/bpf_jit_harden # Rework to enable CONFIG_BPF_JIT to solve "No such file or directory" Signed-off-by: Anders Roxell <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-08-21selftests/bpf: fix test_btf_dump with O=Ilya Leoshkevich2-0/+10
test_btf_dump fails when run with O=, because it needs to access source files and assumes they live in ./progs/, which is not the case in this scenario. Fix by instructing kselftest to copy btf_dump_test_case_*.c files to the test directory. Since kselftest does not preserve directory structure, adjust the test to look in ./progs/ and then in ./. Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-08-21selftests/bpf: fix test_cgroup_storage on s390Ilya Leoshkevich1-3/+3
test_cgroup_storage fails on s390 with an assertion failure: packets are dropped when they shouldn't. The problem is that BPF_DW packet count is accessed as BPF_W with an offset of 0, which is not correct on big-endian machines. Since the point of this test is not to verify narrow loads/stores, simply use BPF_DW when working with packet counts. Fixes: 68cfa3ac6b8d ("selftests/bpf: add a cgroup storage test") Fixes: 919646d2a3a9 ("selftests/bpf: extend the storage test to test per-cpu cgroup storage") Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-08-21libbpf: use LFS (_FILE_OFFSET_BITS) instead of direct mmap2 syscallIvan Khoronzhuk2-35/+15
Drop __NR_mmap2 fork in flavor of LFS, that is _FILE_OFFSET_BITS=64 (glibc & bionic) / LARGEFILE64_SOURCE (for musl) decision. It allows mmap() to use 64bit offset that is passed to mmap2 syscall. As result pgoff is not truncated and no need to use direct access to mmap2 for 32 bits systems. Signed-off-by: Ivan Khoronzhuk <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-08-21selftests: kvm: fix state save/load on processors without XSAVEPaolo Bonzini1-6/+10
state_test and smm_test are failing on older processors that do not have xcr0. This is because on those processor KVM does provide support for KVM_GET/SET_XSAVE (to avoid having to rely on the older KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS. Signed-off-by: Paolo Bonzini <[email protected]>
2019-08-21pm-graph v5.5Todd Brandt4-296/+387
Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-08-21ACPICA: iASL,acpi_dump: Improve y/n queryBob Moore1-2/+8
The y/n query is used for file overwrite. Use fgetc, check for standalone newline. ACPICA commit f9eb60ead76e5b2b6e578b553f592452ccfca47a Link: https://github.com/acpica/acpica/commit/f9eb60ea Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Erik Schmauss <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-08-20Merge tag 'perf-core-for-mingo-5.4-20190820' of ↵Ingo Molnar20-44/+166
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: callchains: Alexey Budankov: - Allow collecting LBR together with DWARF callchains, for workloads where the userspace stack size collected is not big enough for pure DWARF based unwinding. - Dump the LBR call stack in 'perf report -D'. perf top: Arnaldo Carvalho de Melo: - Show visual cue at start to state that the minimal set of samples are being collected prior to sorting/bucketizing/displaying. CoreSight (ARM hardware tracing): Leo Yan: - Support sample flags 'insn' and 'insnlen'. core: Adrian Hunter: - Add comment for 'idx' member in 'struct perf_sample_id. tools headers: Arnaldo Carvalho de Melo: - Synchronize linux/bits.h, which required grabbing a copy of the kernel const.h headers and some changes in the ordering of header directories. - Sync x86's asm/cpufeatures.h with the with the kernel, no change in any of the tools. libperf: Jiri Olsa: - Fix arch include paths. libtraceevent: Steven Rostedt (VMware): - Fix "robust" test of do_generate_dynamic_list_file. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2019-08-20Merge tag 'v5.3-rc5' into perf/core, to pick up fixesIngo Molnar5-39/+52
Signed-off-by: Ingo Molnar <[email protected]>
2019-08-20tools: bpftool: implement "bpftool btf show|list"Quentin Monnet3-6/+363
Add a "btf list" (alias: "btf show") subcommand to bpftool in order to dump all BTF objects loaded on a system. When running the command, hash tables are built in bpftool to retrieve all the associations between BTF objects and BPF maps and programs. This allows for printing all such associations when listing the BTF objects. The command is added at the top of the subcommands for "bpftool btf", so that typing only "bpftool btf" also comes down to listing the programs. We could not have this with the previous command ("dump"), which required a BTF object id, so it should not break any previous behaviour. This also makes the "btf" command behaviour consistent with "prog" or "map". Bash completion is updated to use "bpftool btf" instead of "bpftool prog" to list the BTF ids, as it looks more consistent. Example output (plain): # bpftool btf show 9: size 2989B prog_ids 21 map_ids 15 17: size 2847B prog_ids 36 map_ids 30,29,28 26: size 2847B Signed-off-by: Quentin Monnet <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-08-20libbpf: add bpf_btf_get_next_id() to cycle through BTF objectsQuentin Monnet3-0/+8
Add an API function taking a BTF object id and providing the id of the next BTF object in the kernel. This can be used to list all BTF objects loaded on the system. v2: - Rebase on top of Andrii's changes regarding libbpf versioning. Signed-off-by: Quentin Monnet <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-08-20libbpf: refactor bpf_*_get_next_id() functionsQuentin Monnet1-13/+8
In preparation for the introduction of a similar function for retrieving the id of the next BTF object, consolidate the code from bpf_prog_get_next_id() and bpf_map_get_next_id() in libbpf. Signed-off-by: Quentin Monnet <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-08-20tools: bpf: synchronise BPF UAPI header with toolsQuentin Monnet1-0/+1
Synchronise the bpf.h header under tools, to report the addition of the new BPF_BTF_GET_NEXT_ID syscall command for bpf(). Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-08-20Tools: hv: move to tools buildsystemAndy Shevchenko2-10/+44
There is a nice buildsystem dedicated for userspace tools in Linux kernel tree. Switch Hyper-V daemons to be built by it. Cc: Vitaly Kuznetsov <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Tested-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2019-08-20Tools: hv: kvp: eliminate 'may be used uninitialized' warningVitaly Kuznetsov1-1/+1
When building hv_kvp_daemon GCC-8.3 complains: hv_kvp_daemon.c: In function ‘kvp_get_ip_info.constprop’: hv_kvp_daemon.c:812:30: warning: ‘ip_buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized] struct hv_kvp_ipaddr_value *ip_buffer; this seems to be a false positive: we only use ip_buffer when op == KVP_OP_GET_IP_INFO and it is only unset when op == KVP_OP_ENUMERATE. Silence the warning by initializing ip_buffer to NULL. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2019-08-20libperf: Fix arch include pathsJiri Olsa1-1/+1
Guenter Roeck reported problem with compilation when the ARCH is specified: $ make ARCH=x86_64 In file included from tools/include/asm/atomic.h:6:0, from include/linux/atomic.h:5, from tools/include/linux/refcount.h:41, from cpumap.c:4: tools/include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/cmpxchg.h: No such file or directory The problem is that we don't use SRCARCH (the sanitized ARCH version) and we don't get the proper include path. Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Guenter Roeck <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Fixes: 314350491810 ("libperf: Make libperf.a part of the perf build") Link: http://lkml.kernel.org/r/20190820124624.GG24105@krava Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20tools headers: Fixup bitsperlong per arch includesArnaldo Carvalho de Melo1-9/+9
We were getting the file by luck, from one of the paths in -I, fix it to get it from the proper place: $ cd tools/include/uapi/asm/ [acme@quaco asm]$ grep include bitsperlong.h #include "../../arch/x86/include/uapi/asm/bitsperlong.h" #include "../../arch/arm64/include/uapi/asm/bitsperlong.h" #include "../../arch/powerpc/include/uapi/asm/bitsperlong.h" #include "../../arch/s390/include/uapi/asm/bitsperlong.h" #include "../../arch/sparc/include/uapi/asm/bitsperlong.h" #include "../../arch/mips/include/uapi/asm/bitsperlong.h" #include "../../arch/ia64/include/uapi/asm/bitsperlong.h" #include "../../arch/riscv/include/uapi/asm/bitsperlong.h" #include "../../arch/alpha/include/uapi/asm/bitsperlong.h" #include <asm-generic/bitsperlong.h> $ ls -la ../../arch/x86/include/uapi/asm/bitsperlong.h ls: cannot access '../../arch/x86/include/uapi/asm/bitsperlong.h': No such file or directory $ ls -la ../../../arch/*/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 237 ../../../arch/alpha/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 841 ../../../arch/arm64/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 966 ../../../arch/hexagon/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 234 ../../../arch/ia64/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 100 ../../../arch/microblaze/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 244 ../../../arch/mips/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 352 ../../../arch/parisc/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 312 ../../../arch/powerpc/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 353 ../../../arch/riscv/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 292 ../../../arch/s390/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 323 ../../../arch/sparc/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 320 ../../../arch/x86/include/uapi/asm/bitsperlong.h $ Found while fixing some other problem, before it was escaping the tools/ chroot and using stuff in the kernel sources: CC /tmp/build/perf/util/find_bit.o In file included from /git/linux/tools/include/../../arch/x86/include/uapi/asm/bitsperlong.h:11, from /git/linux/tools/include/uapi/asm/bitsperlong.h:3, from /git/linux/tools/include/linux/bits.h:6, from /git/linux/tools/include/linux/bitops.h:13, from ../lib/find_bit.c:17: # cd /git/linux/tools/include/../../arch/x86/include/uapi/asm/ # pwd /git/linux/arch/x86/include/uapi/asm # Now it is getting the one we want it to, i.e. the one inside tools/: CC /tmp/build/perf/util/find_bit.o In file included from /git/linux/tools/arch/x86/include/uapi/asm/bitsperlong.h:11, from /git/linux/tools/include/linux/bits.h:6, from /git/linux/tools/include/linux/bitops.h:13, Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20perf top: Show info message while collecting samplesArnaldo Carvalho de Melo1-0/+3
Give visual cue about what is happening while initially collecting the minimal set of samples to collect/sort/display. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20perf ui browser: Allow specifying message to show when no samples are ↵Arnaldo Carvalho de Melo2-0/+3
available to display The 'perf top' tool will use that to avoid having a initial blank screen while collecting the minimum number of samples to sort and display. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20perf ui: Introduce non-interactive ui__info_window() functionArnaldo Carvalho de Melo2-8/+17
Sometimes we want just to print a message on the center of the screen, like in 'perf top' while we wait for the minimum amount of samples to be collected before sorting and showing them. Also expose __ui__info_window() as an optimization for cases where such message is to be printed while holding the ui lock. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20perf ui: Make 'exit_msg' optional in ui__question_window()Arnaldo Carvalho de Melo1-3/+11
We will not need it when refactoring this function to be non-interactive, so make it optional. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20perf cs-etm: Support sample flags 'insn' and 'insnlen'Leo Yan1-1/+34
The synthetic branch and instruction samples are missed to set instruction related info, thus the perf tool fails to display samples with flags '-F,+insn,+insnlen'. The CoreSight trace decoder provides sufficient information to decide the instruction size based on the ISA type: A64/A32 instructions are 32-bit size, but one exception is the T32 instruction size, which might be 32-bit or 16-bit. This patch handles these cases and it reads the instruction values from DSO file; thus can support the flags '-F,+insn,+insnlen'. Before: # perf script -F,insn,insnlen,ip,sym 0 [unknown] ilen: 0 ffff97174044 _start ilen: 0 ffff97174938 _dl_start ilen: 0 ffff97174938 _dl_start ilen: 0 ffff97174938 _dl_start ilen: 0 ffff97174938 _dl_start ilen: 0 ffff97174938 _dl_start ilen: 0 ffff97174938 _dl_start ilen: 0 ffff97174938 _dl_start ilen: 0 ffff97174938 _dl_start ilen: 0 [...] After: # perf script -F,insn,insnlen,ip,sym 0 [unknown] ilen: 0 ffff97174044 _start ilen: 4 insn: 2f 02 00 94 ffff97174938 _dl_start ilen: 4 insn: c1 ff ff 54 ffff97174938 _dl_start ilen: 4 insn: c1 ff ff 54 ffff97174938 _dl_start ilen: 4 insn: c1 ff ff 54 ffff97174938 _dl_start ilen: 4 insn: c1 ff ff 54 ffff97174938 _dl_start ilen: 4 insn: c1 ff ff 54 ffff97174938 _dl_start ilen: 4 insn: c1 ff ff 54 ffff97174938 _dl_start ilen: 4 insn: c1 ff ff 54 ffff97174938 _dl_start ilen: 4 insn: c1 ff ff 54 [...] Signed-off-by: Leo Yan <[email protected]> Reviewed-by: Mathieu Poirier <[email protected]> Tested-by: Mathieu Poirier <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Robert Walker <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20perf report: Prefer DWARF callstacks to LBR ones when captured bothAlexey Budankov1-0/+2
Display DWARF based callchains when the perf.data file contains raw thread stack data as LBR callstack data. Commiter testing: This changes the output from the branch stack based one, i.e. without this patch, for the same file as in the previous csets: # perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 13 # # Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles # ........ ....... .................... ........................... ......................................... .................. # 7.69% ls libpthread-2.29.so [.] _init [.] __pthread_initialize_minimal_internal 6827 7.69% ls ld-2.29.so [k] _start [k] _dl_start - 7.69% ls ld-2.29.so [.] _dl_start_user [.] _dl_init -24790 7.69% ls ld-2.29.so [k] _dl_start [k] _dl_sysdep_start 278 7.69% ls ld-2.29.so [k] dl_main [k] _dl_map_object_deps 15581 7.69% ls ld-2.29.so [k] open_verify.constprop.0 [k] lseek64 4228 7.69% ls ld-2.29.so [k] _dl_map_object [k] open_verify.constprop.0 55 7.69% ls ld-2.29.so [k] openaux [k] _dl_map_object 67 7.69% ls ld-2.29.so [k] _dl_map_object_deps [k] 0x00007f441b57c090 112 7.69% ls ld-2.29.so [.] call_init.part.0 [.] _init 334 7.69% ls ld-2.29.so [.] _dl_init [.] call_init.part.0 383 7.69% ls ld-2.29.so [k] _dl_sysdep_start [k] dl_main 45 7.69% ls ld-2.29.so [k] _dl_catch_exception [k] openaux 116 # # (Tip: For memory address profiling, try: perf mem record / perf mem report) # To the one that shows call chains: # perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 10 of event 'cycles' # Event count (approx.): 3204047 # # Children Self Command Shared Object Symbol # ........ ........ ....... .................. ......................................... # 55.01% 0.00% ls [kernel.vmlinux] [k] entry_SYSCALL_64_after_hwframe | ---entry_SYSCALL_64_after_hwframe do_syscall_64 | --16.01%--__x64_sys_execve __do_execve_file.isra.0 search_binary_handler load_elf_binary elf_map vm_mmap_pgoff do_mmap mmap_region perf_event_mmap perf_iterate_sb perf_iterate_ctx perf_event_mmap_output perf_output_copy memcpy_erms 55.01% 39.00% ls [kernel.vmlinux] [k] do_syscall_64 | |--39.00%--0xffffffffffffffff | _dl_map_object | open_verify.constprop.0 | __lseek64 (inlined) | entry_SYSCALL_64_after_hwframe | do_syscall_64 | --16.01%--do_syscall_64 __x64_sys_execve __do_execve_file.isra.0 search_binary_handler load_elf_binary elf_map vm_mmap_pgoff do_mmap mmap_region perf_event_mmap perf_iterate_sb perf_iterate_ctx perf_event_mmap_output perf_output_copy memcpy_erms 42.95% 42.95% ls libpthread-2.29.so [.] __pthread_initialize_minimal_internal | ---_init __pthread_initialize_minimal_internal 42.95% 0.00% ls libpthread-2.29.so [.] _init | ---_init __pthread_initialize_minimal_internal <SNIP> # # (Tip: Profiling branch (mis)predictions with: perf record -b / perf report) # # The branch stack view be explicitely selected using: # perf report -h branch-stack Usage: perf report [<options>] -b, --branch-stack use branch records for per branch histogram filling # I.e. after this patch: # perf report -b --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 13 # # Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles # ........ ....... .................... ........................... ......................................... .................. # 7.69% ls libpthread-2.29.so [.] _init [.] __pthread_initialize_minimal_internal 6827 7.69% ls ld-2.29.so [k] _start [k] _dl_start - 7.69% ls ld-2.29.so [.] _dl_start_user [.] _dl_init -24790 7.69% ls ld-2.29.so [k] _dl_start [k] _dl_sysdep_start 278 7.69% ls ld-2.29.so [k] dl_main [k] _dl_map_object_deps 15581 7.69% ls ld-2.29.so [k] open_verify.constprop.0 [k] lseek64 4228 7.69% ls ld-2.29.so [k] _dl_map_object [k] open_verify.constprop.0 55 7.69% ls ld-2.29.so [k] openaux [k] _dl_map_object 67 7.69% ls ld-2.29.so [k] _dl_map_object_deps [k] 0x00007f441b57c090 112 7.69% ls ld-2.29.so [.] call_init.part.0 [.] _init 334 7.69% ls ld-2.29.so [.] _dl_init [.] call_init.part.0 383 7.69% ls ld-2.29.so [k] _dl_sysdep_start [k] dl_main 45 7.69% ls ld-2.29.so [k] _dl_catch_exception [k] openaux 116 # # (Tip: Show current config key-value pairs: perf config --list) # # Signed-off-by: Alexey Budankov <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20perf report: Dump LBR callstack data by -D jointly with thread stackAlexey Budankov1-12/+19
Make perf report -D command print captured LBR callstack chain when it is collected together with raw thread stack data: 2752673087247083 0x5d10 [0x548]: PERF_RECORD_SAMPLE(IP, 0x4002): 5841/5841: 0x40121f period: 1543862 addr: 0 ... FP chain: nr:0 ... branch callstack: nr:3 ..... 0: 00000000004011d0 ..... 1: 00007f393c388411 ..... 2: 0000000000401098 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x34e7 .... BX 0x7fff5f6dd3c0 .... CX 0xffffffff .... DX 0x34e6 .... SI 0x7f393c5268d0 .... DI 0x0 .... BP 0x401260 .... SP 0x7fff5f6dd3c0 .... IP 0x40121f .... FLAGS 0x29f .... CS 0x33 .... SS 0x2b .... R8 0x7f393c526800 .... R9 0x7f393c525da0 .... R10 0xfffffffffffff70a .... R11 0x246 .... R12 0x401070 .... R13 0x7fff5f6ddcb0 .... R14 0x0 .... R15 0x0 ... ustack: size 1024, offset 0x130 . data_src: 0x5080021 ... thread: stack_test:5841 ...... dso: /root/abudanko/stacks/stack_test Committer testing: # perf record -g --call-graph dwarf,1024 -j stack,u ls > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.042 MB perf.data (10 samples) ] # Before: # perf report -D |& grep PERF_RECORD_SAMPLE -A28 | tail -29 67538909824483 0xa7a0 [0x560]: PERF_RECORD_SAMPLE(IP, 0x4002): 9721/9721: 0x7f441b2b1e20 period: 1376095 addr: 0 ... FP chain: nr:0 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x7f441b2b1000 .... BX 0x7f441b55b970 .... CX 0x7fff6e2db218 .... DX 0x7fff6e2db218 .... SI 0x7fff6e2db208 .... DI 0x1 .... BP 0x1 .... SP 0x7fff6e2db178 .... IP 0x7f441b2b1e20 .... FLAGS 0x20a .... CS 0x33 .... SS 0x2b .... R8 0x1 .... R9 0x7f441b371c18 .... R10 0x7f441b5a5f10 .... R11 0x202 .... R12 0x7fff6e2db208 .... R13 0x7fff6e2db218 .... R14 0x7f441b5a7150 .... R15 0x0 ... ustack: size 1024, offset 0x148 . data_src: 0x5080021 ... thread: ls:9721 ...... dso: /usr/lib64/libpthread-2.29.so 0xad00 [0x60]: event: 10 # After: # perf report -D |& grep PERF_RECORD_SAMPLE -A31 | tail -32 67538909824483 0xa7a0 [0x560]: PERF_RECORD_SAMPLE(IP, 0x4002): 9721/9721: 0x7f441b2b1e20 period: 1376095 addr: 0 ... FP chain: nr:0 ... branch callstack: nr:4 ..... 0: 00007f441b2b1e20 ..... 1: 00007f441b58af1a ..... 2: 00007f441b58b0e1 ..... 3: 00007f441b57c145 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x7f441b2b1000 .... BX 0x7f441b55b970 .... CX 0x7fff6e2db218 .... DX 0x7fff6e2db218 .... SI 0x7fff6e2db208 .... DI 0x1 .... BP 0x1 .... SP 0x7fff6e2db178 .... IP 0x7f441b2b1e20 .... FLAGS 0x20a .... CS 0x33 .... SS 0x2b .... R8 0x1 .... R9 0x7f441b371c18 .... R10 0x7f441b5a5f10 .... R11 0x202 .... R12 0x7fff6e2db208 .... R13 0x7fff6e2db218 .... R14 0x7f441b5a7150 .... R15 0x0 ... ustack: size 1024, offset 0x148 . data_src: 0x5080021 ... thread: ls:9721 ...... dso: /usr/lib64/libpthread-2.29.so # Signed-off-by: Alexey Budankov <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20perf record: Enable LBR callstack capture jointly with thread stackAlexey Budankov1-0/+1
Enable '-j stack' applicability together with '--call-graph dwarf' option so thread stack data and LBR call stack could be captured jointly: $ perf record -g --call-graph dwarf,1024 -j stack,u -- stack_test Collected LBR call stack can be used to augment DWARF call stack calculated from the raw thread stack data and to provide more comprehensive call stack information for cases when collected SIZE is not enough to cover complete thread stack. Such cases are typical for workloads that allocate large arrays of data on its threads stacks or the possible SIZE to collect can't be large enough due to workload nature or system configuration and this is where hardware captured LBR call stacks can provide missing stack frames. Possible DWARF plus LBR call stacks consolidation algorithm description follows. With this patch set perf report command UI currently ignores collected LBR call stack data and still provides DWARF based call stacks information. =========================================================================== Overview: Legend: THS - thread stack CTX - thread register context SWS - software stack SSF - skipped stack frames PSS - Perf sample stack ip,sp,bp - HW registers values d - allocated stack regions kip - ip address in the kernel space K - captured thread stack size THS ----- | |<-stack bottom ... |---| |ip4| |---| PSS = SWS(THS(K)) | | --> | | | |d3 | user/ | |---| user PSS kernel PSS | |ip3| ------ ------ | |---| |SSF | |SSF | | | | .... .... | | | ------ ------ | |d2 | | -1 | | -1 | |---| user ------ ------ K |ip2| CTX |ip3 | |ip3 | |---| |----| |----| | |d1 | ... |ip2 | , |ip2 | | |---| |---| |----| |----| | |ip1| |bp0| |ip1 | |ip1 | | |---| |---| |----| |----| | | | |ip0|->|ip0 | |ip0 |<-user stack top | | | |---| ------ ------ | | |<-|sp0|<-stack |kip0|<-kernel stack bottom --> ----- ----- top |----| |kip1| |----| |kip2| |----| .... | |<-kernel stack top ------ Algorithm details: Legend: HWS - hardware stack K-SWS - kernel software stack BRANCH TABLE HWS ip ip from to ------ ----------- |ip7`| |ip7`| | |----| |----|----| |ip6`| |ip6`| | user PSS |----| |----|----| |ip5`| |ip5`| | ------ |----| |----|----| | -1 | |ip4`| |ip4`| | ------ |----| |----|----| |ip3 |~~~|ip3`| |ip3`| | |----| |----| |----|----| |ip2 |~~~|ip2`| |ip2`| | |----| |----| |----|----| |ip1 |~~~|ip1`| |ip1`|ip0`| |----| |----| ----------- |ip0 |~~~|ip0`|<---------' ------ ------ 1. if (sym(ipj) == sym(ipj`)), j=0-3 ===> user PSS 2. ipj` , j=4-7 ===> user PSS Augmented PSS = A_SWS(SWS(THS(K)), HWS): user/ user PSS kernel PSS ------ ------ |ip7`| |ip7`|<-user PSS bottom |----| |----| |ip6`| |ip6`| |----| |----| HWS |ip5`| |ip5`| |----| |----| |ip4`| |ip4`| ------ ------ |ip3 | |ip3 | |----| |----| SWS |ip2 | |ip2 | |----| |----| |ip1 | |ip1 | |----| |----| |ip0 | |ip0 |<-user PSS top ------ ------ |kip0|<-kernel PSS bottom |----| |kip1| K-SWS |----| |kip2| |----| |kip3|<-kernel PSS top ------ APSS Committer testing: Before: # perf record -g --call-graph dwarf,1024 -j stack,u ls > /dev/null unknown branch filter stack, check man page Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -j, --branch-filter <branch filter mask> branch stack filter modes # perf record -g --call-graph dwarf,1024 -j u ls > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.054 MB perf.data (12 samples) ] # perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CALLCHAIN|PERIOD|BRANCH_STACK|REGS_USER|STACK_USER|DATA_SRC, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY, sample_regs_user: 0xff0fff, sample_stack_user: 1024 # After: # perf record -g --call-graph dwarf,1024 -j stack,u ls > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (11 samples) ] [root@quaco ~]# perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CALLCHAIN|PERIOD|BRANCH_STACK|REGS_USER|STACK_USER|DATA_SRC, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: USER|CALL_STACK, sample_regs_user: 0xff0fff, sample_stack_user: 1024 # Signed-off-by: Alexey Budankov <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20tools lib traceevent: Fix "robust" test of do_generate_dynamic_list_fileSteven Rostedt (VMware)1-2/+2
The tools/lib/traceevent/Makefile had a test added to it to detect a failure of the "nm" when making the dynamic list file (whatever that is). The problem is that the test sorts the values "U W w" and some versions of sort will place "w" ahead of "W" (even though it has a higher ASCII value, and break the test. Add 'tr "w" "W"' to merge the two and not worry about the ordering. Reported-by: Tzvetomir Stoyanov <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Carrillo-Cisneros <[email protected]> Cc: He Kuang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michal rarek <[email protected]> Cc: Paul Turner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Uwe Kleine-König <[email protected]> Cc: Wang Nan <[email protected]> Cc: [email protected] Fixes: 6467753d61399 ("tools lib traceevent: Robustify do_generate_dynamic_list_file") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20perf evsel: Add comment for 'idx' member in 'struct perf_sample_idAdrian Hunter1-0/+7
The 'idx' member was added as preparation for AUX area sampling. Add a comment to describe why. Signed-off-by: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20tools arch x86: Sync asm/cpufeatures.h with the with the kernelArnaldo Carvalho de Melo1-0/+3
To pick up the changes in: f36cf386e3fe ("x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS") 18ec54fdd6d1 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations") That don't affect anything in tools/. This silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20tools headers: Synchronize linux/bits.h with the kernel sourcesArnaldo Carvalho de Melo1-7/+10
To pick up the changes in this cset: 95b980d62d52 ("linux/bits.h: make BIT(), GENMASK(), and friends available in assembly") To address this tools/perf build warning: Warning: Kernel ABI header at 'tools/include/linux/bits.h' differs from latest version at 'include/linux/bits.h' diff -u tools/include/linux/bits.h include/linux/bits.h Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20tools headers: Grab copy of linux/const.h, needed by linux/bits.hArnaldo Carvalho de Melo3-0/+42
So that can update the copy of linux/bits.h that now uses macros defined in const.h and that are not available in older systems. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20perf tools: tools/include should come before tools/uapi/includeArnaldo Carvalho de Melo1-1/+1
The next cset will grap const.h copies from the kernel to keep bits.h in sync as it started to use linux/const.h, that in turn includes uapi/linux/const.h. So now we have a file with the same name in tools/include and tools/uapi/include, and one includes the other, we need to have tools/include/uapi/ after tools/include/ for this to work, fix it. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20tools headers: Add limits.h to access __WORDSIZEArnaldo Carvalho de Melo1-0/+1
We need to make sure limits.h is included before checking if we can use __WORDSIZE, do it. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-08-20memremap: remove the dev field in struct dev_pagemapChristoph Hellwig1-1/+0
The dev field in struct dev_pagemap is only used to print dev_name in two places, which are at best nice to have. Just remove the field and thus the name in those two messages. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Ira Weiny <[email protected]> Reviewed-by: Dan Williams <[email protected]> Tested-by: Bharata B Rao <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-08-20xfrm: policy: avoid warning splat when merging nodesFlorian Westphal1-0/+7
syzbot reported a splat: xfrm_policy_inexact_list_reinsert+0x625/0x6e0 net/xfrm/xfrm_policy.c:877 CPU: 1 PID: 6756 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #57 Call Trace: xfrm_policy_inexact_node_reinsert net/xfrm/xfrm_policy.c:922 [inline] xfrm_policy_inexact_node_merge net/xfrm/xfrm_policy.c:958 [inline] xfrm_policy_inexact_insert_node+0x537/0xb50 net/xfrm/xfrm_policy.c:1023 xfrm_policy_inexact_alloc_chain+0x62b/0xbd0 net/xfrm/xfrm_policy.c:1139 xfrm_policy_inexact_insert+0xe8/0x1540 net/xfrm/xfrm_policy.c:1182 xfrm_policy_insert+0xdf/0xce0 net/xfrm/xfrm_policy.c:1574 xfrm_add_policy+0x4cf/0x9b0 net/xfrm/xfrm_user.c:1670 xfrm_user_rcv_msg+0x46b/0x720 net/xfrm/xfrm_user.c:2676 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2477 xfrm_netlink_rcv+0x74/0x90 net/xfrm/xfrm_user.c:2684 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x809/0x9a0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0xa70/0xd30 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] There is no reproducer, however, the warning can be reproduced by adding rules with ever smaller prefixes. The sanity check ("does the policy match the node") uses the prefix value of the node before its updated to the smaller value. To fix this, update the prefix earlier. The bug has no impact on tree correctness, this is only to prevent a false warning. Reported-by: [email protected] Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2019-08-19tc-testing: concurrency: wrap piped rule update commandsVlad Buslov1-9/+9
Concurrent tests use several commands to update rules in parallel: 'find' prints names of batch files in tmp directory and pipes result to 'xargs' which runs instance of tc per batch file in parallel. This breaks when used with ns plugin that adds 'ip netns exec $NS' prefix to the command, which causes only first command in pipe to be executed in namespace: =====> Test e41d: Add 1M flower filters with 10 parallel tc instances -----> prepare stage ns/SubPlugin.adjust_command adjust_command: stage is setup; inserting netns stuff in command [/bin/mkdir tmp] list [['/bin/mkdir', 'tmp']] adjust_command: return command [ip netns exec tcut /bin/mkdir tmp] command "ip netns exec tcut /bin/mkdir tmp" ns/SubPlugin.adjust_command adjust_command: stage is setup; inserting netns stuff in command [/sbin/tc qdisc add dev ens1f0 ingress] list [['/sbin/tc', 'qdisc', 'add', 'dev', 'ens1f0', 'ingress']] adjust_command: return command [ip netns exec tcut /sbin/tc qdisc add dev ens1f0 ingress] command "ip netns exec tcut /sbin/tc qdisc add dev ens1f0 ingress" ns/SubPlugin.adjust_command adjust_command: stage is setup; inserting netns stuff in command [./tdc_multibatch.py ens1f0 tmp 100000 10 add] list [['./tdc_multibatch.py', 'ens1f0', 'tmp', '100000', '10', 'add']] adjust_command: return command [ip netns exec tcut ./tdc_multibatch.py ens1f0 tmp 100000 10 add] command "ip netns exec tcut ./tdc_multibatch.py ens1f0 tmp 100000 10 add" -----> execute stage ns/SubPlugin.adjust_command adjust_command: stage is execute; inserting netns stuff in command [find tmp/add* -print | xargs -n 1 -P 10 /sbin/tc -b] list [['find', 'tmp/add*', '-print', '|', 'xargs', '-n', '1', '-P', '10', '/sbin/tc', '-b'] ] adjust_command: return command [ip netns exec tcut find tmp/add* -print | xargs -n 1 -P 10 /sbin/tc -b] command "ip netns exec tcut find tmp/add* -print | xargs -n 1 -P 10 /sbin/tc -b" exit: 123 exit: 0 Cannot find device "ens1f0" Cannot find device "ens1f0" Command failed tmp/add_0:1 Command failed tmp/add_1:1 Cannot find device "ens1f0" Command failed tmp/add_2:1 Cannot find device "ens1f0" Command failed tmp/add_4:1 Cannot find device "ens1f0" Command failed tmp/add_3:1 Cannot find device "ens1f0" Command failed tmp/add_5:1 Cannot find device "ens1f0" Command failed tmp/add_6:1 Cannot find device "ens1f0" Command failed tmp/add_8:1 Cannot find device "ens1f0" Command failed tmp/add_7:1 Cannot find device "ens1f0" Command failed tmp/add_9:1 Fix the issue by executing whole compound command in namespace by wrapping it in 'bash -c' invocation. Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc") Signed-off-by: Vlad Buslov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-19tc-testing: use dedicated DUMMY interface name for dummy devVlad Buslov5-285/+286
A lot of tests reuse $DEV1 veth name for naming dummy device. This causes problem when tdc is invoked without specifying a test group and tries to execute all tests. In this case tdc instantiates ns plugin, which creates veth pair once before running tests. However, if any of the tests that reuse $DEV1 run before test that depend on ns plugin, it will delete $DEV1 as a part of teardown section: =====> Test 3b88: Delete ingress qdisc twice [3770/41080] -----> prepare stage ns/SubPlugin.adjust_command adjust_command: stage is setup; inserting netns stuff in command [/sbin/ip link add dev v0p1 type dummy || /bin/true] list [['/sbin/ip', 'link', 'add', 'dev', 'v0p1', 'type', 'dummy', '||', '/bin/true']] adjust_command: return command [ip netns exec tcut /sbin/ip link add dev v0p1 type dummy || /bin/true] command "ip netns exec tcut /sbin/ip link add dev v0p1 type dummy || /bin/true" ns/SubPlugin.adjust_command adjust_command: stage is setup; inserting netns stuff in command [/sbin/tc qdisc add dev v0p1 ingress] list [['/sbin/tc', 'qdisc', 'add', 'dev', 'v0p1', 'ingress']] adjust_command: return command [ip netns exec tcut /sbin/tc qdisc add dev v0p1 ingress] command "ip netns exec tcut /sbin/tc qdisc add dev v0p1 ingress" ns/SubPlugin.adjust_command adjust_command: stage is setup; inserting netns stuff in command [/sbin/tc qdisc del dev v0p1 ingress] list [['/sbin/tc', 'qdisc', 'del', 'dev', 'v0p1', 'ingress']] adjust_command: return command [ip netns exec tcut /sbin/tc qdisc del dev v0p1 ingress] command "ip netns exec tcut /sbin/tc qdisc del dev v0p1 ingress" -----> execute stage ns/SubPlugin.adjust_command adjust_command: stage is execute; inserting netns stuff in command [/sbin/tc qdisc del dev v0p1 ingress] list [['/sbin/tc', 'qdisc', 'del', 'dev', 'v0p1', 'ingress']] adjust_command: return command [ip netns exec tcut /sbin/tc qdisc del dev v0p1 ingress] command "ip netns exec tcut /sbin/tc qdisc del dev v0p1 ingress" -----> verify stage ns/SubPlugin.adjust_command adjust_command: stage is verify; inserting netns stuff in command [/sbin/tc qdisc show dev v0p1] list [['/sbin/tc', 'qdisc', 'show', 'dev', 'v0p1']] adjust_command: return command [ip netns exec tcut /sbin/tc qdisc show dev v0p1] command "ip netns exec tcut /sbin/tc qdisc show dev v0p1" -----> teardown stage ns/SubPlugin.adjust_command adjust_command: stage is teardown; inserting netns stuff in command [/sbin/ip link del dev v0p1 type dummy] list [['/sbin/ip', 'link', 'del', 'dev', 'v0p1', 'type', 'dummy']] adjust_command: return command [ip netns exec tcut /sbin/ip link del dev v0p1 type dummy] command "ip netns exec tcut /sbin/ip link del dev v0p1 type dummy" After this ns-dependent tests will fail because dev doesn't exist: =====> Test 901f: Add fw filter with prio at 32-bit maxixum -----> prepare stage ns/SubPlugin.adjust_command adjust_command: stage is setup; inserting netns stuff in command [/sbin/tc qdisc add dev v0p1 ingress] list [['/sbin/tc', 'qdisc', 'add', 'dev', 'v0p1', 'ingress']] adjust_command: return command [ip netns exec tcut /sbin/tc qdisc add dev v0p1 ingress] command "ip netns exec tcut /sbin/tc qdisc add dev v0p1 ingress" -----> prepare stage *** Could not execute: "$TC qdisc add dev $DEV1 ingress" -----> prepare stage *** Error message: "Cannot find device "v0p1" " returncode 1; expected [0] -----> prepare stage *** Aborting test run. <_io.BufferedReader name=3> *** stdout *** <_io.BufferedReader name=5> *** stderr *** "-----> prepare stage" did not complete successfully Exception <class '__main__.PluginMgrTestFail'> ('setup', None, '"-----> prepare stage" did not complete successfully') (caught in test_runner, running test 477 901f Add fw filter with prio at 32-bit maxixum stage setup) --------------- traceback File "./tdc.py", line 371, in test_runner res = run_one_test(pm, args, index, tidx) File "./tdc.py", line 272, in run_one_test prepare_env(args, pm, 'setup', "-----> prepare stage", tidx["setup"]) File "./tdc.py", line 247, in prepare_env '"{}" did not complete successfully'.format(prefix)) --------------- Fix the issue by introducing standalone $DUMMY config variable and substitute all usage of $DEV1 in tests that don't depend on ns plugin. Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc") Signed-off-by: Vlad Buslov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-19selftests: use "$(MAKE)" instead of "make"Ilya Leoshkevich1-11/+11
When doing "make kselftest TARGETS=bpf -j12", bpf progs end up being compiled sequentially and thus slowly. The reason is that parent make (tools/testing/selftests/Makefile) does not share its jobserver with child make (tools/testing/selftests/bpf/Makefile), therefore the latter runs with -j1. Change all instances of "make" to "$(MAKE)", so that the whole make hierarchy runs using a single jobserver. Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller28-76/+276
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <[email protected]>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds7-22/+155
Pull networking fixes from David Miller: 1) Fix jmp to 1st instruction in x64 JIT, from Alexei Starovoitov. 2) Severl kTLS fixes in mlx5 driver, from Tariq Toukan. 3) Fix severe performance regression due to lack of SKB coalescing of fragments during local delivery, from Guillaume Nault. 4) Error path memory leak in sch_taprio, from Ivan Khoronzhuk. 5) Fix batched events in skbedit packet action, from Roman Mashak. 6) Propagate VLAN TX offload to hw_enc_features in bond and team drivers, from Yue Haibing. 7) RXRPC local endpoint refcounting fix and read after free in rxrpc_queue_local(), from David Howells. 8) Fix endian bug in ibmveth multicast list handling, from Thomas Falcon. 9) Oops, make nlmsg_parse() wrap around the correct function, __nlmsg_parse not __nla_parse(). Fix from David Ahern. 10) Memleak in sctp_scend_reset_streams(), fro Zheng Bin. 11) Fix memory leak in cxgb4, from Wenwen Wang. 12) Yet another race in AF_PACKET, from Eric Dumazet. 13) Fix false detection of retransmit failures in tipc, from Tuong Lien. 14) Use after free in ravb_tstamp_skb, from Tho Vu. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) ravb: Fix use-after-free ravb_tstamp_skb netfilter: nf_tables: map basechain priority to hardware priority net: sched: use major priority number as hardware priority wimax/i2400m: fix a memory leak bug net: cavium: fix driver name ibmvnic: Unmap DMA address of TX descriptor buffers after use bnxt_en: Fix to include flow direction in L2 key bnxt_en: Use correct src_fid to determine direction of the flow bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails bnxt_en: Improve RX doorbell sequence. bnxt_en: Fix VNIC clearing logic for 57500 chips. net: kalmia: fix memory leaks cx82310_eth: fix a memory leak bug bnx2x: Fix VF's VLAN reconfiguration in reload. Bluetooth: Add debug setting for changing minimum encryption key size tipc: fix false detection of retransmit failures lan78xx: Fix memory leaks MAINTAINERS: r8169: Update path to the driver MAINTAINERS: PHY LIBRARY: Update files in the record ...
2019-08-19selftests, arm64: fix uninitialized symbol in tags_test.cAndrey Konovalov1-3/+5
Fix tagged_ptr not being initialized when TBI is not enabled. Link: https://www.spinics.net/lists/linux-kselftest/msg09446.html Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Andrey Konovalov <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-08-19Merge 5.3-rc5 into usb-nextGreg Kroah-Hartman5-39/+52
We need the usb fixes in here as well for other patches to build on. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-08-18tools: iio: add .gitignoreBartosz Golaszewski1-0/+4
The generated files must not be tracked by git. Add a local .gitignore. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2019-08-17Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds5-39/+52
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V fixes from Sasha Levin: - A few fixes for the userspace hyper-v tools from Adrian Vladu. - A fix for the hyper-v MAINTAINERs entry from Lan Tianyu. - Fix for SPDX license identifier in the userspace tools from Nishad Kamdar. * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: MAINTAINERS: Fix Hyperv vIOMMU driver file name tools: hv: Use the correct style for SPDX License Identifier tools: hv: fix typos in toolchain tools: hv: fix KVP and VSS daemons exit code tools: hv: fixed Python pep8/flake8 warnings for lsvmbus
2019-08-17selftests/bpf: add sockopt clone/inheritance testStanislav Fomichev4-1/+353
Add a test that calls setsockopt on the listener socket which triggers BPF program. This BPF program writes to the sk storage and sets clone flag. Make sure that sk storage is cloned for a newly accepted connection. We have two cloned maps in the tests to make sure we hit both cases in bpf_sk_storage_clone: first element (sk_storage_alloc) and non-first element(s) (selem_link_map). Cc: Martin KaFai Lau <[email protected]> Cc: Yonghong Song <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-08-17bpf: sync bpf.h to tools/Stanislav Fomichev1-0/+3
Sync new sk storage clone flag. Cc: Martin KaFai Lau <[email protected]> Cc: Yonghong Song <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.