aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2024-02-15bpf: Fix test verif_scale_strobemeta_subprogs failure due to llvm19Yonghong Song2-4/+8
With latest llvm19, I hit the following selftest failures with $ ./test_progs -j libbpf: prog 'on_event': BPF program load failed: Permission denied libbpf: prog 'on_event': -- BEGIN PROG LOAD LOG -- combined stack size of 4 calls is 544. Too large verification time 1344153 usec stack depth 24+440+0+32 processed 51008 insns (limit 1000000) max_states_per_insn 19 total_states 1467 peak_states 303 mark_read 146 -- END PROG LOAD LOG -- libbpf: prog 'on_event': failed to load: -13 libbpf: failed to load object 'strobemeta_subprogs.bpf.o' scale_test:FAIL:expect_success unexpected error: -13 (errno 13) #498 verif_scale_strobemeta_subprogs:FAIL The verifier complains too big of the combined stack size (544 bytes) which exceeds the maximum stack limit 512. This is a regression from llvm19 ([1]). In the above error log, the original stack depth is 24+440+0+32. To satisfy interpreter's need, in verifier the stack depth is adjusted to 32+448+32+32=544 which exceeds 512, hence the error. The same adjusted stack size is also used for jit case. But the jitted codes could use smaller stack size. $ egrep -r stack_depth | grep round_up arm64/net/bpf_jit_comp.c: ctx->stack_size = round_up(prog->aux->stack_depth, 16); loongarch/net/bpf_jit.c: bpf_stack_adjust = round_up(ctx->prog->aux->stack_depth, 16); powerpc/net/bpf_jit_comp.c: cgctx.stack_size = round_up(fp->aux->stack_depth, 16); riscv/net/bpf_jit_comp32.c: round_up(ctx->prog->aux->stack_depth, STACK_ALIGN); riscv/net/bpf_jit_comp64.c: bpf_stack_adjust = round_up(ctx->prog->aux->stack_depth, 16); s390/net/bpf_jit_comp.c: u32 stack_depth = round_up(fp->aux->stack_depth, 8); sparc/net/bpf_jit_comp_64.c: stack_needed += round_up(stack_depth, 16); x86/net/bpf_jit_comp.c: EMIT3_off32(0x48, 0x81, 0xEC, round_up(stack_depth, 8)); x86/net/bpf_jit_comp.c: int tcc_off = -4 - round_up(stack_depth, 8); x86/net/bpf_jit_comp.c: round_up(stack_depth, 8)); x86/net/bpf_jit_comp.c: int tcc_off = -4 - round_up(stack_depth, 8); x86/net/bpf_jit_comp.c: EMIT3_off32(0x48, 0x81, 0xC4, round_up(stack_depth, 8)); In the above, STACK_ALIGN in riscv/net/bpf_jit_comp32.c is defined as 16. So stack is aligned in either 8 or 16, x86/s390 having 8-byte stack alignment and the rest having 16-byte alignment. This patch calculates total stack depth based on 16-byte alignment if jit is requested. For the above failing case, the new stack size will be 32+448+0+32=512 and no verification failure. llvm19 regression will be discussed separately in llvm upstream. The verifier change caused three test failures as these tests compared messages with stack size. More specifically, - test_global_funcs/global_func1: fail with interpreter mode and success with jit mode. Adjusted stack sizes so both jit and interpreter modes will fail. - async_stack_depth/{pseudo_call_check, async_call_root_check}: since jit and interpreter will calculate different stack sizes, the failure msg is adjusted to omit those specific stack size numbers. [1] https://lore.kernel.org/bpf/[email protected]/ Suggested-by: Alexei Starovoitov <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-02-15Merge tag 'net-6.8-rc5' of ↵Linus Torvalds13-41/+163
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from can, wireless and netfilter. Current release - regressions: - af_unix: fix task hung while purging oob_skb in GC - pds_core: do not try to run health-thread in VF path Current release - new code bugs: - sched: act_mirred: don't zero blockid when net device is being deleted Previous releases - regressions: - netfilter: - nat: restore default DNAT behavior - nf_tables: fix bidirectional offload, broken when unidirectional offload support was added - openvswitch: limit the number of recursions from action sets - eth: i40e: do not allow untrusted VF to remove administratively set MAC address Previous releases - always broken: - tls: fix races and bugs in use of async crypto - mptcp: prevent data races on some of the main socket fields, fix races in fastopen handling - dpll: fix possible deadlock during netlink dump operation - dsa: lan966x: fix crash when adding interface under a lag when some of the ports are disabled - can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock Misc: - a handful of fixes and reliability improvements for selftests - fix sysfs documentation missing net/ in paths - finish the work of squashing the missing MODULE_DESCRIPTION() warnings in networking" * tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits) net: fill in MODULE_DESCRIPTION()s for missing arcnet net: fill in MODULE_DESCRIPTION()s for mdio_devres net: fill in MODULE_DESCRIPTION()s for ppp net: fill in MODULE_DESCRIPTION()s for fddik/skfp net: fill in MODULE_DESCRIPTION()s for plip net: fill in MODULE_DESCRIPTION()s for ieee802154/fakelb net: fill in MODULE_DESCRIPTION()s for xen-netback net: ravb: Count packets instead of descriptors in GbEth RX path pppoe: Fix memory leak in pppoe_sendmsg() net: sctp: fix skb leak in sctp_inq_free() net: bcmasp: Handle RX buffer allocation failure net-timestamp: make sk_tskey more predictable in error path selftests: tls: increase the wait in poll_partial_rec_async ice: Add check for lport extraction to LAG init netfilter: nf_tables: fix bidirectional offload regression netfilter: nat: restore default DNAT behavior netfilter: nft_set_pipapo: fix missing : in kdoc igc: Remove temporary workaround igb: Fix string truncation warnings in igb_set_fw_version can: netlink: Fix TDCO calculation using the old data bittiming ...
2024-02-15Merge tag 'devicetree-fixes-for-6.8-1' of ↵Linus Torvalds1-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Improve devlink dependency parsing for DT graphs - Fix devlink handling of io-channels dependencies - Fix PCI addressing in marvell,prestera example - A few schema fixes for property constraints - Improve performance of DT unprobed devices kselftest - Fix regression in DT_SCHEMA_FILES handling - Fix compile error in unittest for !OF_DYNAMIC * tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg" of: property: Add in-ports/out-ports support to of_graph_get_port_parent() of: property: Improve finding the supplier of a remote-endpoint property of: property: Improve finding the consumer of a remote-endpoint property net: marvell,prestera: Fix example PCI bus addressing of: unittest: Fix compile in the non-dynamic case of: property: fix typo in io-channels dt-bindings: tpm: Drop type from "resets" dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints dt-bindings: xilinx: replace Piyush Mehta maintainership kselftest: dt: Stop relying on dirname to improve performance dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory
2024-02-14selftests: tls: increase the wait in poll_partial_rec_asyncJakub Kicinski1-2/+2
Test runners on debug kernels occasionally fail with: # # RUN tls_err.13_aes_gcm.poll_partial_rec_async ... # # tls.c:1883:poll_partial_rec_async:Expected poll(&pfd, 1, 5) (0) == 1 (1) # # tls.c:1870:poll_partial_rec_async:Expected status (256) == 0 (0) # # poll_partial_rec_async: Test failed at step #17 # # FAIL tls_err.13_aes_gcm.poll_partial_rec_async # not ok 699 tls_err.13_aes_gcm.poll_partial_rec_async # # FAILED: 698 / 699 tests passed. This points to the second poll() in the test which is expected to wait for the sender to send the rest of the data. Apparently under some conditions that doesn't happen within 5ms, bump the timeout to 20ms. Fixes: 23fcb62bc19c ("selftests: tls: add tests for poll behavior") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-14Merge tag 'landlock-6.8-rc5' of ↵Linus Torvalds3-13/+59
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock test fixes from Mickaël Salaün: "Fix build issues for tests, and improve test compatibility" * tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Fix capability for net_test selftests/landlock: Fix fs_test build with old libc selftests/landlock: Fix net_test build with old libc
2024-02-14libbpf: Make remark about zero-initializing bpf_*_info structsMatt Bobrowski1-5/+17
In some situations, if you fail to zero-initialize the bpf_{prog,map,btf,link}_info structs supplied to the set of LIBBPF helpers bpf_{prog,map,btf,link}_get_info_by_fd(), you can expect the helper to return an error. This can possibly leave people in a situation where they're scratching their heads for an unnnecessary amount of time. Make an explicit remark about the requirement of zero-initializing the supplied bpf_{prog,map,btf,link}_info structs for the respective LIBBPF helpers. Internally, LIBBPF helpers bpf_{prog,map,btf,link}_get_info_by_fd() call into bpf_obj_get_info_by_fd() where the bpf(2) BPF_OBJ_GET_INFO_BY_FD command is used. This specific command is effectively backed by restrictions enforced by the bpf_check_uarg_tail_zero() helper. This function ensures that if the size of the supplied bpf_{prog,map,btf,link}_info structs are larger than what the kernel can handle, trailing bits are zeroed. This can be a problem when compiling against UAPI headers that don't necessarily match the sizes of the same underlying types known to the kernel. Signed-off-by: Matt Bobrowski <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-14Merge tag 'kvm-x86-selftests-6.8-rcN' of https://github.com/kvm-x86/linux ↵Paolo Bonzini58-239/+236
into HEAD KVM selftests fixes/cleanups (and one KVM x86 cleanup) for 6.8: - Remove redundant newlines from error messages. - Delete an unused variable in the AMX test (which causes build failures when compiling with -Werror). - Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails with an error code other than ENOENT (a Hyper-V selftest bug resulted in an EMFILE, and the test eventually got skipped). - Fix TSC related bugs in several Hyper-V selftests. - Fix a bug in the dirty ring logging test where a sem_post() could be left pending across multiple runs, resulting in incorrect synchronization between the main thread and the vCPU worker thread. - Relax the dirty log split test's assertions on 4KiB mappings to fix false positives due to the number of mappings for memslot 0 (used for code and data that is NOT being dirty logged) changing, e.g. due to NUMA balancing. - Have KVM's gtod_is_based_on_tsc() return "bool" instead of an "int" (the function generates boolean values, and all callers treat the return value as a bool).
2024-02-13bpf: emit source code file name and line number in verifier logAndrii Nakryiko1-2/+2
As BPF applications grow in size and complexity and are separated into multiple .bpf.c files that are statically linked together, it becomes harder and harder to match verifier's BPF assembly level output to original C code. While often annotated C source code is unique enough to be able to identify the file it belongs to, quite often this is actually problematic as parts of source code can be quite generic. Long story short, it is very useful to see source code file name and line number information along with the original C code. Verifier already knows this information, we just need to output it. This patch extends verifier log with file name and line number information, emitted next to original (presumably C) source code, annotating BPF assembly output, like so: ; <original C code> @ <filename>.bpf.c:<line> If file name has directory names in it, they are stripped away. This should be fine in practice as file names tend to be pretty unique with C code anyways, and keeping log size smaller is always good. In practice this might look something like below, where some code is coming from application files, while others are from libbpf's usdt.bpf.h header file: ; if (STROBEMETA_READ( @ strobemeta_probe.bpf.c:534 5592: (79) r1 = *(u64 *)(r10 -56) ; R1_w=mem_or_null(id=1589,sz=7680) R10=fp0 5593: (7b) *(u64 *)(r10 -56) = r1 ; R1_w=mem_or_null(id=1589,sz=7680) R10=fp0 5594: (79) r3 = *(u64 *)(r10 -8) ; R3_w=scalar() R10=fp0 fp-8=mmmmmmmm ... 170: (71) r1 = *(u8 *)(r8 +15) ; frame1: R1_w=scalar(...) R8_w=map_value(map=__bpf_usdt_spec,ks=4,vs=208) 171: (67) r1 <<= 56 ; frame1: R1_w=scalar(...) 172: (c7) r1 s>>= 56 ; frame1: R1_w=scalar(smin=smin32=-128,smax=smax32=127) ; val <<= arg_spec->arg_bitshift; @ usdt.bpf.h:183 173: (67) r1 <<= 32 ; frame1: R1_w=scalar(...) 174: (77) r1 >>= 32 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) 175: (79) r2 = *(u64 *)(r10 -8) ; frame1: R2_w=scalar() R10=fp0 fp-8=mmmmmmmm 176: (6f) r2 <<= r1 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) R2_w=scalar() 177: (7b) *(u64 *)(r10 -8) = r2 ; frame1: R2_w=scalar(id=61) R10=fp0 fp-8_w=scalar(id=61) ; if (arg_spec->arg_signed) @ usdt.bpf.h:184 178: (bf) r3 = r2 ; frame1: R2_w=scalar(id=61) R3_w=scalar(id=61) 179: (7f) r3 >>= r1 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) R3_w=scalar() ; if (arg_spec->arg_signed) @ usdt.bpf.h:184 180: (71) r4 = *(u8 *)(r8 +14) 181: safe log_fixup tests needed a minor adjustment as verifier log output increased a bit and that test is quite sensitive to such changes. Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-02-13selftests/bpf: add anonymous user struct as global subprog arg testAndrii Nakryiko1-0/+29
Add tests validating that kernel handles pointer to anonymous struct argument as PTR_TO_MEM case, not as PTR_TO_CTX case. Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-02-13bpf: don't infer PTR_TO_CTX for programs with unnamed context typeAndrii Nakryiko1-0/+19
For program types that don't have named context type name (e.g., BPF iterator programs or tracepoint programs), ctx_tname will be a non-NULL empty string. For such programs it shouldn't be possible to have PTR_TO_CTX argument for global subprogs based on type name alone. arg:ctx tag is the only way to have PTR_TO_CTX passed into global subprog for such program types. Fix this loophole, which currently would assume PTR_TO_CTX whenever user uses a pointer to anonymous struct as an argument to their global subprogs. This happens in practice with the following (quite common, in practice) approach: typedef struct { /* anonymous */ int x; } my_type_t; int my_subprog(my_type_t *arg) { ... } User's intent is to have PTR_TO_MEM argument for `arg`, but verifier will complain about expecting PTR_TO_CTX. This fix also closes unintended s390x-specific KPROBE handling of PTR_TO_CTX case. Selftest change is necessary to accommodate this. Fixes: 91cc1a99740e ("bpf: Annotate context types") Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-02-13selftests/bpf: Test PTR_MAYBE_NULL arguments of struct_ops operators.Kui-Feng Lee5-1/+115
Test if the verifier verifies nullable pointer arguments correctly for BPF struct_ops programs. "test_maybe_null" in struct bpf_testmod_ops is the operator defined for the test cases here. A BPF program should check a pointer for NULL beforehand to access the value pointed by the nullable pointer arguments, or the verifier should reject the programs. The test here includes two parts; the programs checking pointers properly and the programs not checking pointers beforehand. The test checks if the verifier accepts the programs checking properly and rejects the programs not checking at all. Signed-off-by: Kui-Feng Lee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2024-02-13libbpf: Add support to GCC in CORE macro definitionsCupertino Miranda1-7/+38
Due to internal differences between LLVM and GCC the current implementation for the CO-RE macros does not fit GCC parser, as it will optimize those expressions even before those would be accessible by the BPF backend. As examples, the following would be optimized out with the original definitions: - As enums are converted to their integer representation during parsing, the IR would not know how to distinguish an integer constant from an actual enum value. - Types need to be kept as temporary variables, as the existing type casts of the 0 address (as expanded for LLVM), are optimized away by the GCC C parser, never really reaching GCCs IR. Although, the macros appear to add extra complexity, the expanded code is removed from the compilation flow very early in the compilation process, not really affecting the quality of the generated assembly. Signed-off-by: Cupertino Miranda <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-13bpf: Abstract loop unrolling pragmas in BPF selftestsJose E. Marchesi19-42/+102
[Changes from V1: - Avoid conflict by rebasing with latest master.] Some BPF tests use loop unrolling compiler pragmas that are clang specific and not supported by GCC. These pragmas, along with their GCC equivalences are: #pragma clang loop unroll_count(N) #pragma GCC unroll N #pragma clang loop unroll(full) #pragma GCC unroll 65534 #pragma clang loop unroll(disable) #pragma GCC unroll 1 #pragma unroll [aka #pragma clang loop unroll(enable)] There is no GCC equivalence to this pragma. It enables unrolling on loops that the compiler would not ordinarily unroll even with -O2|-funroll-loops, but it is not equivalent to full unrolling either. This patch adds a new header progs/bpf_compiler.h that defines the following macros, which correspond to each pair of compiler-specific pragmas above: __pragma_loop_unroll_count(N) __pragma_loop_unroll_full __pragma_loop_no_unroll __pragma_loop_unroll The selftests using loop unrolling pragmas are then changed to include the header and use these macros in place of the explicit pragmas. Tested in bpf-next master. No regressions. Signed-off-by: Jose E. Marchesi <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-13selftests/bpf: Ensure fentry prog cannot attach to bpf_spin_{lock,unlcok}()Yonghong Song2-0/+57
Add two tests to ensure fentry programs cannot attach to bpf_spin_{lock,unlock}() helpers. The tracing_failure.c files can be used in the future for other tracing failure cases. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-13selftests: net: more pmtu.sh fixesPaolo Abeni1-2/+2
The netdev CI is reporting failures for the pmtu test: [ 115.929264] br0: port 2(vxlan_a) entered forwarding state # 2024/02/08 17:33:22 socat[7871] E bind(7, {AF=10 [0000:0000:0000:0000:0000:0000:0000:0000]:50000}, 28): Address already in use # 2024/02/08 17:33:22 socat[7877] E write(7, 0x5598fb6ff000, 8192): Connection refused # TEST: IPv6, bridged vxlan4: PMTU exceptions [FAIL] # File size 0 mismatches exepcted value in locally bridged vxlan test The root cause is apparently a socket created by a previous iteration of the relevant loop still lasting in LAST_ACK state. Note that even the file size check is racy, the receiver process dumping the file could still be running in background Allow the listener to bound on the same local port via SO_REUSEADDR and collect file output file size only after the listener completion. Fixes: 136a1b434bbb ("selftests: net: test vxlan pmtu exceptions with tcp") Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/4f51c11a1ce7ca7a4dabd926cffff63dadac9ba1.1707731086.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-13selftests: net: more strict check in net_helperPaolo Abeni1-4/+7
The helper waiting for a listener port can match any socket whose hexadecimal representation of source or destination addresses matches that of the given port. Additionally, any socket state is accepted. All the above can let the helper return successfully before the relevant listener is actually ready, with unexpected results. So far I could not find any related failure in the netdev CI, but the next patch is going to make the critical event more easily reproducible. Address the issue matching the port hex only vs the relevant socket field and additionally checking the socket state for TCP sockets. Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection") Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/192b3dbc443d953be32991d1b0ca432bd4c65008.1707731086.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-13selftests: net: cope with slow env in so_txtime.sh testPaolo Abeni1-4/+25
The mentioned test is failing in slow environments: # SO_TXTIME ipv4 clock monotonic # ./so_txtime: recv: timeout: Resource temporarily unavailable not ok 1 selftests: net: so_txtime.sh # exit=1 Tuning the tolerance in the test binary is error-prone and doomed to failures is slow-enough environment. Just resort to suppress any error in such cases. Note to suppress them we need first to refactor a bit the code moving it to explicit error handling. Fixes: af5136f95045 ("selftests/net: SO_TXTIME with ETF and FQ") Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/2142d9ed4b5c5aa07dd1b455779625d91b175373.1707730902.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-13selftests: net: cope with slow env in gro.sh testPaolo Abeni1-0/+5
The gro self-tests sends the packets to be aggregated with multiple write operations. When running is slow environment, it's hard to guarantee that the GRO engine will wait for the last packet in an intended train. The above causes almost deterministic failures in our CI for the 'large' test-case. Address the issue explicitly ignoring failures for such case in slow environments (KSFT_MACHINE_SLOW==true). Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/97d3ba83f5a2bfeb36f6bc0fb76724eb3dafb608.1707729403.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-12selftests: net: ip_local_port_range: define IPPROTO_MPTCPMaxim Galaganov1-0/+4
Older glibc's netinet/in.h may leave IPPROTO_MPTCP undefined when building ip_local_port_range.c, that leads to "error: use of undeclared identifier 'IPPROTO_MPTCP'". Define IPPROTO_MPTCP in such cases, just like in other MPTCP selftests. Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE") Reported-by: Linux Kernel Functional Testing <[email protected]> Closes: https://lore.kernel.org/netdev/CA+G9fYvGO5q4o_Td_kyQgYieXWKw6ktMa-Q0sBu6S-0y3w2aEQ@mail.gmail.com/ Signed-off-by: Maxim Galaganov <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-12selftests/net: Adding test cases of replacing routes and route advertisements.Kui-Feng Lee1-22/+129
Add tests of changing permanent routes to temporary routes and the reversed case to make sure GC working correctly in these cases. Add tests for the temporary routes from RA. The existing device will be deleted between tests to remove all routes associated with it, so that the earlier tests don't mess up the later ones. Reviewed-by: Hangbin Liu <[email protected]> Reviewed-by: David Ahern <[email protected]> Tested-by: Hangbin Liu <[email protected]> Signed-off-by: Kui-Feng Lee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-12selftests: net: ignore timing errors in txtimestamp if KSFT_MACHINE_SLOWPaolo Abeni1-1/+2
This test is time sensitive. It may fail on virtual machines and for debug builds. Similar to commit c41dfb0dfbec ("selftests/net: ignore timing errors in so_txtime if KSFT_MACHINE_SLOW"), optionally suppress failure for timing errors (only). Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-12tools/rtla: Exit with EXIT_SUCCESS when help is invokedJohn Kacur4-4/+20
Fix rtla so that the following commands exit with 0 when help is invoked rtla osnoise top -h rtla osnoise hist -h rtla timerlat top -h rtla timerlat hist -h Link: https://lore.kernel.org/linux-trace-devel/[email protected] Cc: [email protected] Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode") Signed-off-by: John Kacur <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rtla: Replace setting prio with nice for SCHED_OTHERlimingming32-3/+5
Since the sched_priority for SCHED_OTHER is always 0, it makes no sence to set it. Setting nice for SCHED_OTHER seems more meaningful. Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: b1696371d865 ("rtla: Helper functions for rtla") Signed-off-by: limingming3 <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rv: Fix curr_reactor uninitialized variableDaniel Bristot de Oliveira1-1/+1
clang is reporting: $ make HOSTCC=clang CC=clang LLVM_IAS=1 clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -I include -c -o src/in_kernel.o src/in_kernel.c [...] src/in_kernel.c:227:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] 227 | if (!end) | ^~~~ src/in_kernel.c:242:9: note: uninitialized use occurs here 242 | return curr_reactor; | ^~~~~~~~~~~~ src/in_kernel.c:227:2: note: remove the 'if' if its condition is always false 227 | if (!end) | ^~~~~~~~~ 228 | goto out_free; | ~~~~~~~~~~~~~ src/in_kernel.c:221:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] 221 | if (!start) | ^~~~~~ src/in_kernel.c:242:9: note: uninitialized use occurs here 242 | return curr_reactor; | ^~~~~~~~~~~~ src/in_kernel.c:221:2: note: remove the 'if' if its condition is always false 221 | if (!start) | ^~~~~~~~~~~ 222 | goto out_free; | ~~~~~~~~~~~~~ src/in_kernel.c:215:20: note: initialize the variable 'curr_reactor' to silence this warning 215 | char *curr_reactor; | ^ | = NULL 2 warnings generated. Which is correct. Setting curr_reactor to NULL avoids the problem. Link: https://lkml.kernel.org/r/3a35551149e5ee0cb0950035afcb8082c3b5d05b.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Donald Zickus <[email protected]> Fixes: 6d60f89691fc ("tools/rv: Add in-kernel monitor interface") Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rv: Fix Makefile compiler options for clangDaniel Bristot de Oliveira1-1/+6
The following errors are showing up when compiling rv with clang: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized $(pkg-config --cflags libtracefs) -I include -c -o src/utils.o src/utils.c clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument] warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option] 1 warning generated. clang -o rv -ggdb src/in_kernel.o src/rv.o src/trace.o src/utils.o $(pkg-config --libs libtracefs) src/in_kernel.o: file not recognized: file format not recognized clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:110: rv] Error 1 Solve these issues by: - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang - informing the linker about -flto=auto Link: https://lkml.kernel.org/r/ed94a8ddc2ca8c8ef663cfb7ae9dd196c4a66b33.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Fixes: 4bc4b131d44c ("rv: Add rv tool") Suggested-by: Donald Zickus <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rtla: Remove unused sched_getattr() functionDaniel Bristot de Oliveira1-6/+0
Clang is reporting: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:241:19: warning: unused function 'sched_getattr' [-Wunused-function] 241 | static inline int sched_getattr(pid_t pid, struct sched_attr *attr, | ^~~~~~~~~~~~~ 1 warning generated. Which is correct, so remove the unused function. Link: https://lkml.kernel.org/r/eaed7ba122c4ae88ce71277c824ef41cbf789385.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Donald Zickus <[email protected]> Fixes: b1696371d865 ("rtla: Helper functions for rtla") Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rtla: Fix clang warning about mount_point var sizeDaniel Bristot de Oliveira1-1/+1
clang is reporting this warning: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:548:66: warning: 'fscanf' may overflow; destination buffer in argument 3 has size 1024, but the corresponding specifier may require size 1025 [-Wfortify-source] 548 | while (fscanf(fp, "%*s %" STR(MAX_PATH) "s %99s %*s %*d %*d\n", mount_point, type) == 2) { | ^ Increase mount_point variable size to MAX_PATH+1 to avoid the overflow. Link: https://lkml.kernel.org/r/1b46712e93a2f4153909514a36016959dcc4021c.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Donald Zickus <[email protected]> Fixes: a957cbc02531 ("rtla: Add -C cgroup support") Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rtla: Fix uninitialized bucket/data->bucket_size warningDaniel Bristot de Oliveira2-4/+2
When compiling rtla with clang, I am getting the following warnings: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [..] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/osnoise_hist.o src/osnoise_hist.c src/osnoise_hist.c:138:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] 138 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~ src/osnoise_hist.c:149:6: note: uninitialized use occurs here 149 | if (bucket < entries) | ^~~~~~ src/osnoise_hist.c:138:2: note: remove the 'if' if its condition is always true 138 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~~~~~~ 139 | bucket = duration / data->bucket_size; src/osnoise_hist.c:132:12: note: initialize the variable 'bucket' to silence this warning 132 | int bucket; | ^ | = 0 1 warning generated. [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/timerlat_hist.o src/timerlat_hist.c src/timerlat_hist.c:181:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] 181 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~ src/timerlat_hist.c:204:6: note: uninitialized use occurs here 204 | if (bucket < entries) | ^~~~~~ src/timerlat_hist.c:181:2: note: remove the 'if' if its condition is always true 181 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~~~~~~ 182 | bucket = latency / data->bucket_size; src/timerlat_hist.c:175:12: note: initialize the variable 'bucket' to silence this warning 175 | int bucket; | ^ | = 0 1 warning generated. This is a legit warning, but data->bucket_size is always > 0 (see timerlat_hist_parse_args()), so the if is not necessary. Remove the unneeded if (data->bucket_size) to avoid the warning. Link: https://lkml.kernel.org/r/6e1b1665cd99042ae705b3e0fc410858c4c42346.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Donald Zickus <[email protected]> Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode") Fixes: 829a6c0b5698 ("rtla/osnoise: Add the hist mode") Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rtla: Fix Makefile compiler options for clangDaniel Bristot de Oliveira1-1/+6
The following errors are showing up when compiling rtla with clang: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument] warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option] 1 warning generated. clang -o rtla -ggdb src/osnoise.o src/osnoise_hist.o src/osnoise_top.o src/rtla.o src/timerlat_aa.o src/timerlat.o src/timerlat_hist.o src/timerlat_top.o src/timerlat_u.o src/trace.o src/utils.o $(pkg-config --libs libtracefs) src/osnoise.o: file not recognized: file format not recognized clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:110: rtla] Error 1 Solve these issues by: - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang - informing the linker about -flto=auto Link: https://lore.kernel.org/linux-trace-kernel/567ac1b94effc228ce9a0225b9df7232a9b35b55.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Fixes: 1a7b22ab15eb ("tools/rtla: Build with EXTRA_{C,LD}FLAGS") Suggested-by: Donald Zickus <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-11bpf: Allow compiler to inline most of bpf_local_storage_lookup()Marco Elver3-49/+0
In various performance profiles of kernels with BPF programs attached, bpf_local_storage_lookup() appears as a significant portion of CPU cycles spent. To enable the compiler generate more optimal code, turn bpf_local_storage_lookup() into a static inline function, where only the cache insertion code path is outlined Notably, outlining cache insertion helps avoid bloating callers by duplicating setting up calls to raw_spin_{lock,unlock}_irqsave() (on architectures which do not inline spin_lock/unlock, such as x86), which would cause the compiler produce worse code by deciding to outline otherwise inlinable functions. The call overhead is neutral, because we make 2 calls either way: either calling raw_spin_lock_irqsave() and raw_spin_unlock_irqsave(); or call __bpf_local_storage_insert_cache(), which calls raw_spin_lock_irqsave(), followed by a tail-call to raw_spin_unlock_irqsave() where the compiler can perform TCO and (in optimized uninstrumented builds) turns it into a plain jump. The call to __bpf_local_storage_insert_cache() can be elided entirely if cacheit_lockit is a false constant expression. Based on results from './benchs/run_bench_local_storage.sh' (21 trials, reboot between each trial; x86 defconfig + BPF, clang 16) this produces improvements in throughput and latency in the majority of cases, with an average (geomean) improvement of 8%: +---- Hashmap Control -------------------- | | + num keys: 10 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 14.789 M ops/s | 14.745 M ops/s ( ~ ) | +- hits latency | 67.679 ns/op | 67.879 ns/op ( ~ ) | +- important_hits throughput | 14.789 M ops/s | 14.745 M ops/s ( ~ ) | | + num keys: 1000 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 12.233 M ops/s | 12.170 M ops/s ( ~ ) | +- hits latency | 81.754 ns/op | 82.185 ns/op ( ~ ) | +- important_hits throughput | 12.233 M ops/s | 12.170 M ops/s ( ~ ) | | + num keys: 10000 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 7.220 M ops/s | 7.204 M ops/s ( ~ ) | +- hits latency | 138.522 ns/op | 138.842 ns/op ( ~ ) | +- important_hits throughput | 7.220 M ops/s | 7.204 M ops/s ( ~ ) | | + num keys: 100000 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 5.061 M ops/s | 5.165 M ops/s (+2.1%) | +- hits latency | 198.483 ns/op | 194.270 ns/op (-2.1%) | +- important_hits throughput | 5.061 M ops/s | 5.165 M ops/s (+2.1%) | | + num keys: 4194304 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 2.864 M ops/s | 2.882 M ops/s ( ~ ) | +- hits latency | 365.220 ns/op | 361.418 ns/op (-1.0%) | +- important_hits throughput | 2.864 M ops/s | 2.882 M ops/s ( ~ ) | +---- Local Storage ---------------------- | | + num_maps: 1 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 33.005 M ops/s | 39.068 M ops/s (+18.4%) | +- hits latency | 30.300 ns/op | 25.598 ns/op (-15.5%) | +- important_hits throughput | 33.005 M ops/s | 39.068 M ops/s (+18.4%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 37.151 M ops/s | 44.926 M ops/s (+20.9%) | +- hits latency | 26.919 ns/op | 22.259 ns/op (-17.3%) | +- important_hits throughput | 37.151 M ops/s | 44.926 M ops/s (+20.9%) | | + num_maps: 10 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 32.288 M ops/s | 38.099 M ops/s (+18.0%) | +- hits latency | 30.972 ns/op | 26.248 ns/op (-15.3%) | +- important_hits throughput | 3.229 M ops/s | 3.810 M ops/s (+18.0%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 34.473 M ops/s | 41.145 M ops/s (+19.4%) | +- hits latency | 29.010 ns/op | 24.307 ns/op (-16.2%) | +- important_hits throughput | 12.312 M ops/s | 14.695 M ops/s (+19.4%) | | + num_maps: 16 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 32.524 M ops/s | 38.341 M ops/s (+17.9%) | +- hits latency | 30.748 ns/op | 26.083 ns/op (-15.2%) | +- important_hits throughput | 2.033 M ops/s | 2.396 M ops/s (+17.9%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 34.575 M ops/s | 41.338 M ops/s (+19.6%) | +- hits latency | 28.925 ns/op | 24.193 ns/op (-16.4%) | +- important_hits throughput | 11.001 M ops/s | 13.153 M ops/s (+19.6%) | | + num_maps: 17 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 28.861 M ops/s | 32.756 M ops/s (+13.5%) | +- hits latency | 34.649 ns/op | 30.530 ns/op (-11.9%) | +- important_hits throughput | 1.700 M ops/s | 1.929 M ops/s (+13.5%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 31.529 M ops/s | 36.110 M ops/s (+14.5%) | +- hits latency | 31.719 ns/op | 27.697 ns/op (-12.7%) | +- important_hits throughput | 9.598 M ops/s | 10.993 M ops/s (+14.5%) | | + num_maps: 24 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 18.602 M ops/s | 19.937 M ops/s (+7.2%) | +- hits latency | 53.767 ns/op | 50.166 ns/op (-6.7%) | +- important_hits throughput | 0.776 M ops/s | 0.831 M ops/s (+7.2%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 21.718 M ops/s | 23.332 M ops/s (+7.4%) | +- hits latency | 46.047 ns/op | 42.865 ns/op (-6.9%) | +- important_hits throughput | 6.110 M ops/s | 6.564 M ops/s (+7.4%) | | + num_maps: 32 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 14.118 M ops/s | 14.626 M ops/s (+3.6%) | +- hits latency | 70.856 ns/op | 68.381 ns/op (-3.5%) | +- important_hits throughput | 0.442 M ops/s | 0.458 M ops/s (+3.6%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 17.111 M ops/s | 17.906 M ops/s (+4.6%) | +- hits latency | 58.451 ns/op | 55.865 ns/op (-4.4%) | +- important_hits throughput | 4.776 M ops/s | 4.998 M ops/s (+4.6%) | | + num_maps: 100 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 5.281 M ops/s | 5.528 M ops/s (+4.7%) | +- hits latency | 192.398 ns/op | 183.059 ns/op (-4.9%) | +- important_hits throughput | 0.053 M ops/s | 0.055 M ops/s (+4.9%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 6.265 M ops/s | 6.498 M ops/s (+3.7%) | +- hits latency | 161.436 ns/op | 152.877 ns/op (-5.3%) | +- important_hits throughput | 1.636 M ops/s | 1.697 M ops/s (+3.7%) | | + num_maps: 1000 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 0.355 M ops/s | 0.354 M ops/s ( ~ ) | +- hits latency | 2826.538 ns/op | 2827.139 ns/op ( ~ ) | +- important_hits throughput | 0.000 M ops/s | 0.000 M ops/s ( ~ ) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 0.404 M ops/s | 0.403 M ops/s ( ~ ) | +- hits latency | 2481.190 ns/op | 2487.555 ns/op ( ~ ) | +- important_hits throughput | 0.102 M ops/s | 0.101 M ops/s ( ~ ) The on_lookup test in {cgrp,task}_ls_recursion.c is removed because the bpf_local_storage_lookup is no longer traceable and adding tracepoint will make the compiler generate worse code: https://lore.kernel.org/bpf/[email protected]/ Signed-off-by: Marco Elver <[email protected]> Cc: Martin KaFai Lau <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2024-02-10Merge tag 'mm-hotfixes-stable-2024-02-10-11-16' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7 issues or aren't considered to be needed in earlier kernel versions" * tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits) nilfs2: fix potential bug in end_buffer_async_write mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup nilfs2: fix hang in nilfs_lookup_dirty_data_buffers() MAINTAINERS: Leo Yan has moved mm/zswap: don't return LRU_SKIP if we have dropped lru lock fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super mailmap: switch email address for John Moon mm: zswap: fix objcg use-after-free in entry destruction mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range() arch/arm/mm: fix major fault accounting when retrying under per-VMA lock selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page mm: memcg: optimize parent iteration in memcg_rstat_updated() nilfs2: fix data corruption in dsync block recovery for small block sizes mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get() exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock) fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand() getrusage: use sig->stats_lock rather than lock_task_sighand() getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand() ...
2024-02-10selftests: tls: use exact comparison in recv_partialJakub Kicinski1-4/+4
This exact case was fail for async crypto and we weren't catching it. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-09work around gcc bugs with 'asm goto' with outputsLinus Torvalds2-3/+3
We've had issues with gcc and 'asm goto' before, and we created a 'asm_volatile_goto()' macro for that in the past: see commits 3f0116c3238a ("compiler/gcc4: Add quirk for 'asm goto' miscompilation bug") and a9f180345f53 ("compiler/gcc4: Make quirk for asm_volatile_goto() unconditional"). Then, much later, we ended up removing the workaround in commit 43c249ea0b1e ("compiler-gcc.h: remove ancient workaround for gcc PR 58670") because we no longer supported building the kernel with the affected gcc versions, but we left the macro uses around. Now, Sean Christopherson reports a new version of a very similar problem, which is fixed by re-applying that ancient workaround. But the problem in question is limited to only the 'asm goto with outputs' cases, so instead of re-introducing the old workaround as-is, let's rename and limit the workaround to just that much less common case. It looks like there are at least two separate issues that all hit in this area: (a) some versions of gcc don't mark the asm goto as 'volatile' when it has outputs: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420 which is easy to work around by just adding the 'volatile' by hand. (b) Internal compiler errors: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422 which are worked around by adding the extra empty 'asm' as a barrier, as in the original workaround. but the problem Sean sees may be a third thing since it involves bad code generation (not an ICE) even with the manually added 'volatile'. but the same old workaround works for this case, even if this feels a bit like voodoo programming and may only be hiding the issue. Reported-and-tested-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Cc: Nick Desaulniers <[email protected]> Cc: Uros Bizjak <[email protected]> Cc: Jakub Jelinek <[email protected]> Cc: Andrew Pinski <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2024-02-09selftests: udpgso: Pull up network setup into shell scriptJakub Sitnicki2-136/+47
udpgso regression test configures routing and device MTU directly through uAPI (Netlink, ioctl) to do its job. While there is nothing wrong with it, it takes more effort than doing it from shell. Looking forward, we would like to extend the udpgso regression tests to cover the EIO corner case [1], once it gets addressed. That will require a dummy device and device feature manipulation to set it up. Which means more Netlink code. So, in preparation, pull out network configuration into the shell script part of the test, so it is easily extendable in the future. Also, because it now easy to setup routing, add a second local IPv6 address. Because the second address is not managed by the kernel, we can "replace" the corresponding local route with a reduced-MTU one. This unblocks the disabled "ipv6 connected" test case. Add a similar setup for IPv4 for symmetry. [1] https://lore.kernel.org/netdev/[email protected]/ Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: Jakub Sitnicki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: openvswitch: Add validation for the recursion testAaron Conole2-15/+69
Add a test case into the netlink checks that will show the number of nested action recursions won't exceed 16. Going to 17 on a small clone call isn't enough to exhaust the stack on (most) systems, so it should be safe to run even on systems that don't have the fix applied. Signed-off-by: Aaron Conole <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: net: include forwarding libPaolo Abeni1-0/+2
The altnames test uses the forwarding/lib.sh and that dependency currently causes failures when running the test after install: make -C tools/testing/selftests/ TARGETS=net install ./tools/testing/selftests/kselftest_install/run_kselftest.sh \ -t net:altnames.sh # ... # ./altnames.sh: line 8: ./forwarding/lib.sh: No such file or directory # RTNETLINK answers: Operation not permitted # ./altnames.sh: line 73: tests_run: command not found # ./altnames.sh: line 65: pre_cleanup: command not found Address the issue leveraging the TEST_INCLUDES infrastructure provided by commit 2a0683be5b4c ("selftests: Introduce Makefile variable to list shared bash scripts") Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/f7b1e9d468224cbc136d304362315499fe39848f.1707298927.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: tc-testing: add mirred to block tdc testsVictor Nogueira1-0/+396
Add 8 new mirred tdc tests that target mirred to block: - Add mirred mirror to egress block action - Add mirred mirror to ingress block action - Add mirred redirect to egress block action - Add mirred redirect to ingress block action - Try to add mirred action with both dev and block - Try to add mirred action without specifying neither dev nor block - Replace mirred redirect to dev action with redirect to block - Replace mirred redirect to block action with mirror to dev Signed-off-by: Victor Nogueira <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: forwarding: Fix bridge locked port test flakinessIdo Schimmel1-2/+2
The redirection test case fails in the netdev CI on debug kernels because an FDB entry is learned despite the presence of a tc filter that redirects incoming traffic [1]. I am unable to reproduce the failure locally, but I can see how it can happen given that learning is first enabled and only then the ingress tc filter is configured. On debug kernels the time window between these two operations is longer compared to regular kernels, allowing random packets to be transmitted and trigger learning. Fix by reversing the order and configure the ingress tc filter before enabling learning. [1] [...] # TEST: Locked port MAB redirect [FAIL] # Locked entry created for redirected traffic Fixes: 38c43a1ce758 ("selftests: forwarding: Add test case for traffic redirection from a locked port") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: forwarding: Suppress grep warningsIdo Schimmel1-3/+3
Suppress the following grep warnings: [...] INFO: # Port group entries configuration tests - (*, G) TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ] TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ] grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / TEST: IPv4 (*, G) port group entries configuration tests [ OK ] grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / TEST: IPv6 (*, G) port group entries configuration tests [ OK ] [...] They do not fail the test, but do clutter the output. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: forwarding: Fix bridge MDB test flakinessIdo Schimmel1-2/+6
After enabling a multicast querier on the bridge (like the test is doing), the bridge will wait for the Max Response Delay before starting to forward according to its MDB in order to let Membership Reports enough time to be received and processed. Currently, the test is waiting for exactly the default Max Response Delay (10 seconds) which is racy and leads to failures [1]. Fix by reducing the Max Response Delay to 1 second. [1] [...] # TEST: IPv4 host entries forwarding tests [FAIL] # Packet locally received after flood Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: forwarding: Fix layer 2 miss test flakinessIdo Schimmel1-2/+6
After enabling a multicast querier on the bridge (like the test is doing), the bridge will wait for the Max Response Delay before starting to forward according to its MDB in order to let Membership Reports enough time to be received and processed. Currently, the test is waiting for exactly the default Max Response Delay (10 seconds) which is racy and leads to failures [1]. Fix by reducing the Max Response Delay to 1 second. [1] [...] # TEST: L2 miss - Multicast (IPv4) [FAIL] # Unregistered multicast filter was hit after adding MDB entry Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: net: Fix bridge backup port test flakinessIdo Schimmel1-0/+23
The test toggles the carrier of a bridge port in order to test the bridge backup port feature. Due to the linkwatch delayed work the carrier change is not always reflected fast enough to the bridge driver and packets are not forwarded as the test expects, resulting in failures [1]. Fix by busy waiting on the bridge port state until it changes to the desired state following the carrier change. [1] # Backup port # ----------- [...] # TEST: swp1 carrier off [ OK ] # TEST: No forwarding out of swp1 [FAIL] [ 641.995910] br0: port 1(swp1) entered disabled state # TEST: No forwarding out of vx0 [ OK ] Fixes: b408453053fb ("selftests: net: Add bridge backup port and backup nexthop ID test") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Acked-by: Paolo Abeni <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: forwarding: Add missing multicast routing config entriesIdo Schimmel1-0/+7
The two tests that make use of multicast routig (router.sh and router_multicast.sh) are currently failing in the netdev CI because the kernel is missing multicast routing support. Fix by adding the required config entries. Fixes: 6d4efada3b82 ("selftests: forwarding: Add multicast routing test") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08selftests: net: add more missing kernel configPaolo Abeni1-1/+5
The reuseport_addr_any.sh is currently skipping DCCP tests and pmtu.sh is skipping all the FOU/GUE related cases: add the missing options. Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/38d3ca7f909736c1aef56e6244d67c82a9bba6ff.1707326987.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski40-406/+781
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/stmicro/stmmac/common.h 38cc3c6dcc09 ("net: stmmac: protect updates of 64-bit statistics counters") fd5a6a71313e ("net: stmmac: est: Per Tx-queue error count for HLBF") c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio") drivers/net/wireless/microchip/wilc1000/netdev.c c9013880284d ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000") 328efda22af8 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08Merge tag 'net-6.8-rc4' of ↵Linus Torvalds8-23/+85
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and netfilter. Current release - regressions: - nic: intel: fix old compiler regressions - netfilter: ipset: missing gc cancellations fixed Current release - new code bugs: - netfilter: ctnetlink: fix filtering for zone 0 Previous releases - regressions: - core: fix from address in memcpy_to_iter_csum() - netfilter: nfnetlink_queue: un-break NF_REPEAT - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC. - devlink: avoid potential loop in devlink_rel_nested_in_notify_work() - iwlwifi: - mvm: fix a battery life regression - fix double-free bug - mac80211: fix waiting for beacons logic - nic: nfp: flower: prevent re-adding mac index for bonded port Previous releases - always broken: - rxrpc: fix generation of serial numbers to skip zero - tipc: check the bearer type before calling tipc_udp_nl_bearer_add() - tunnels: fix out of bounds access when building IPv6 PMTU error - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER missed - nic: atlantic: fix DMA mapping for PTP hwts ring Misc: - selftests: more fixes to deal with very slow hosts" * tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits) netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 s390/qeth: Fix potential loss of L3-IP@ in case of network issues netfilter: ipset: Missing gc cancellations fixed octeontx2-af: Initialize maps. net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits net: intel: fix old compiler regressions MAINTAINERS: Maintainer change for rds selftests: cmsg_ipv6: repeat the exact packet ...
2024-02-08Merge tag 'nf-24-02-08' of ↵Paolo Abeni1-1/+42
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Narrow down target/match revision to u8 in nft_compat. 2) Bail out with unused flags in nft_compat. 3) Restrict layer 4 protocol to u16 in nft_compat. 4) Remove static in pipapo get command that slipped through when reducing set memory footprint. 5) Follow up incremental fix for the ipset performance regression, this includes the missing gc cancellation, from Jozsef Kadlecsik. 6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0 as no filtering, from Felix Huettner. 7) Reject direction for NFT_CT_ID. 8) Use timestamp to check for set element expiration while transaction is handled to prevent garbage collection from removing set elements that were just added by this transaction. Packet path and netlink dump/get path still use current time to check for expiration. 9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal. 10) map_index needs to be percpu and per-set, not just percpu. At this time its possible for a pipapo set to fill the all-zero part with ones and take the 'might have bits set' as 'start-from-zero' area. From Florian Westphal. This includes three patches: - Change scratchpad area to a structure that provides space for a per-set-and-cpu toggle and uses it of the percpu one. - Add a new free helper to prepare for the next patch. - Remove the scratch_aligned pointer and makes AVX2 implementation use the exact same memory addresses for read/store of the matching state. netfilter pull request 24-02-08 * tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 netfilter: ipset: Missing gc cancellations fixed netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-08netfilter: ctnetlink: fix filtering for zone 0Felix Huettner1-1/+42
previously filtering for the default zone would actually skip the zone filter and flush all zones. Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone") Reported-by: Ilya Maximets <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Felix Huettner <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-07selftests: core: include linux/close_range.h for CLOSE_RANGE_* macrosMuhammad Usama Anjum1-0/+1
Correct header file is needed for getting CLOSE_RANGE_* macros. Previously it was tested with newer glibc which didn't show the need to include the header which was a mistake. Link: https://lkml.kernel.org/r/[email protected] Fixes: ec54424923cf ("selftests: core: remove duplicate defines") Reported-by: Aishwarya TCV <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Muhammad Usama Anjum <[email protected]> Cc: Shuah Khan <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-02-07selftests: bonding: use slowwait instead of hard code sleepHangbin Liu3-10/+24
Use slowwait instead of hard code sleep for bonding tests. In function setup_prepare(), the client_create() will be called after server_create(). So I think there is no need to sleep in server_create() and remove it. For lab_lib.sh, remove bonding module may affect other running bonding tests. And some test env may buildin bond which can't be removed. The bonding link should be removed by lag_reset_network() or netns delete. Signed-off-by: Hangbin Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.