| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When code is compiled with:
-fpatchable-function-entry=${PADDING_BYTES},${PADDING_BYTES}
functions will have PADDING_BYTES of NOP in front of them. Unwinders
and other things that symbolize code locations will typically
attribute these bytes to the preceding function.
Given that these bytes nominally belong to the following symbol this
mis-attribution is confusing.
Inspired by the fact that CFI_CLANG emits __cfi_##name symbols to
claim these bytes, allow objtool to emit __pfx_##name symbols to do
the same.
Therefore add the objtool --prefix=N argument, to conditionally place
a __pfx_##name symbol at N bytes ahead of symbol 'name' when: all
these preceding bytes are NOP and name-N is an instruction boundary.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Yujie Liu <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Due to how gelf_update_sym*() requires an Elf_Data pointer, and how
libelf keeps Elf_Data in a linked list per section,
elf_update_symbol() ends up having to iterate this list on each
update to find the correct Elf_Data for the index'ed symbol.
By allocating one Elf_Data per new symbol, the list grows per new
symbol, giving an effective O(n^2) insertion time. This is obviously
bloody terrible.
Therefore over-allocate the Elf_Data when an extention is needed.
Except it turns out libelf disregards Elf_Scn::sh_size in favour of
the sum of Elf_Data::d_size. IOW it will happily write out all the
unused space and fill it with:
0000000000000000 0 NOTYPE LOCAL DEFAULT UND
entries (aka zeros). Which obviously violates the STB_LOCAL placement
rule, and is a general pain in the backside for not being the desired
behaviour.
Manually fix-up the Elf_Data size to avoid this problem before calling
elf_update().
This significantly improves performance when adding a significant
number of symbols.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Yujie Liu <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
In order to facilitate creation of more symbol types, slice up
elf_create_section_symbol() to extract a generic helper that deals
with adding ELF symbols.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Yujie Liu <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Add gitsource.sh trigger the gitsource testing and monitor the cpu desire
performance, frequency, load, power consumption and throughput etc.
1) Download and tar gitsource codes.
2) Run gitsource benchmark on specific governors, ondemand or schedutil.
3) Run tbench benchmark comparative test on acpi-cpufreq kernel driver.
4) Get desire performance, frequency, load by perf.
5) Get power consumption and throughput by amd_pstate_trace.py.
6) Get run time by /usr/bin/time.
7) Analyse test results and save it in file selftest.gitsource.csv.
8) Plot png images about time, energy and performance per watt
for each test.
Fixed whitespace error during commit:
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Meng Li <[email protected]>
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add tbench.sh trigger the tbench testing and monitor the cpu desire
performance, frequency, load, power consumption and throughput etc.
Signed-off-by: Meng Li <[email protected]>
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Split basic.sh into run.sh and basic.sh.
The modification makes basic.sh more pure, just for test basic kernel
functions. The file of run.sh mainly contains functions such as test
entry, parameter check, prerequisite and log clearing etc.
Then you can specify test case in kselftest/amd-pstate, for example:
sudo ./run.sh -c basic. The detail please run the below script.
./run.sh --help
Signed-off-by: Meng Li <[email protected]>
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Rename amd-pstate-ut.sh to basic.sh.
The purpose of this modification is to facilitate the subsequent
addition of gitsource, tbench and other tests.
Signed-off-by: Meng Li <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When noevents is true and small buffer is used the allocated memory for
holding the data may be smaller than the hard-coded 64 bytes. This can
cause the iio_generic_buffer to crash.
Following was recorded on beagle bone black with v6.0 kernel and the
digit fix patch:
https://lore.kernel.org/all/[email protected]/
using valgrind;
==339== Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info
==339== Command: /iio_generic_buffer -n kx022-accel -T0 -e -l 10 -a -w 2000000
==339== Parent PID: 307
==339==
==339== Syscall param read(buf) points to unaddressable byte(s)
==339== at 0x496BFA4: read (read.c:26)
==339== by 0x11699: main (iio_generic_buffer.c:724)
==339== Address 0x4ab3518 is 0 bytes after a block of size 160 alloc'd
==339== at 0x4864B70: malloc (vg_replace_malloc.c:381)
==339== by 0x115BB: main (iio_generic_buffer.c:677)
Fix this by always using the same size for reading as was used for
data storage allocation.
Signed-off-by: Matti Vaittinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
To pick up fixes and sync with other tools/ libraries.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In most configurations, it works well with skipping 4 entries by
default. If some systems still have 3 BPF internal stack frames,
the next frame should be in a lock function which will be skipped
later when it tries to find a caller. So increasing to 4 won't
affect such systems too.
With --stack-skip=0, I can see something like this:
24 49.84 us 7.41 us 2.08 us mutex bpf_prog_e1b85959d520446c_contention_begin+0x12e
0xffffffffc045040e bpf_prog_e1b85959d520446c_contention_begin+0x12e
0xffffffffc045040e bpf_prog_e1b85959d520446c_contention_begin+0x12e
0xffffffff82ea2071 bpf_trace_run2+0x51
0xffffffff82de775b __bpf_trace_contention_begin+0xb
0xffffffff82c02045 __mutex_lock+0x245
0xffffffff82c019e3 __mutex_lock_slowpath+0x13
0xffffffff82c019c0 mutex_lock+0x20
0xffffffff830a083c kernfs_iop_permission+0x2c
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The msan also warns about the use of VLA for stack_trace variable.
We can dynamically allocate instead. While at it, simplify the error
handle a bit (and fix bugs).
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The --max-stack option is used to allocate the BPF stack map and stack
trace array in the userspace. Check the value properly before using.
Practically it cannot be greater than the sysctl_perf_event_max_stack.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The msan reported a use-of-uninitialized-value warning for the struct
lock_contention_data in lock_contention_read(). While it'd be filled
by bpf_map_lookup_elem(), let's just initialize it to silence the
warning.
==12524==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x562b0f16b1cd in lock_contention_read util/bpf_lock_contention.c:139:7
#1 0x562b0ef65ec6 in __cmd_contention builtin-lock.c:1737:3
#2 0x562b0ef65ec6 in cmd_lock builtin-lock.c:1992:8
#3 0x562b0ee7f50b in run_builtin perf.c:322:11
#4 0x562b0ee7efc1 in handle_internal_command perf.c:376:8
#5 0x562b0ee7e1e9 in run_argv perf.c:420:2
#6 0x562b0ee7e1e9 in main perf.c:550:3
#7 0x7f065f10e632 in __libc_start_main (/usr/lib64/libc.so.6+0x61632)
#8 0x562b0edf2fa9 in _start (perf+0xfa9)
SUMMARY: MemorySanitizer: use-of-uninitialized-value (perf+0xe15160) in lock_contention_read
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Skip an event configuration for event names with a dash/minus in them.
Events with a dash/minus in their name cause parsing issues as legacy
encoding of events would use a dash/minus as a separator.
The parser separates events with dashes into prefixes and suffixes and
then recombines them. Unfortunately if an event has part of its name
that matches a legacy token then the recombining fails.
This is seen for branch-brs where branch is a legacy token. branch-brs
was introduced to sysfs in:
https://lore.kernel.org/all/[email protected]/
The failure is shown below as well as the workaround to use a config
where the dash/minus isn't treated specially:
```
$ perf stat -e branch-brs true
event syntax error: 'branch-brs'
\___ parser error
$ perf stat -e cpu/branch-brs/ true
Performance counter stats for 'true':
46,179 cpu/branch-brs/
```
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Needed to get the event_attr_init() and perf_event_paranoid() prototypes
that were being obtained indirectly, by sheer luck.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Those headers are not needed in util/mmap.h, remove them.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It uses things like perf_event__name() but were not including event.h,
where its prototype lives, fix it.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Its a thread method, so move it to thread.h, this way some places that
were using event.h just to get this prototype may stop doing so and
speed up building and disentanble the header dependency graph.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Its a addr_location method, so move it to symbol.h, where 'struct
addr_location' is, this way some places that were using event.h just to
get this prototype may stop doing so and speed up building and
disentanble the header dependency graph.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Its a machine method, so move it to machine.h, this way some places that
were using event.h just to get this prototype may stop doing so and
speed up building and disentanble the header dependency graph.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Leave just some forward declarations for pointers, move the includes to
where they are really needed.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
disentangle headers
Some places were including event.h just to get 'struct perf_sample',
move it to a separate place so that we speed up a bit the build.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
map_symbol.h is needed because we have structs that contains 'struct
addr_map_symbol', so add it, remove the others.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In the bpf-prologue.h header we are just using pointers, so no need to
include headers for that, just provide forward declarations for those
types.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
E.g. all the hw_breakpoint tests are failing right now.
So if I run `kunit.py run --altests --arch=x86_64`, then I see
> Testing complete. Ran 408 tests: passed: 392, failed: 9, skipped: 7
Seeing which 9 tests failed out of the hundreds is annoying.
If my terminal doesn't have scrollback support, I have to resort to
looking at `.kunit/test.log` for the `not ok` lines.
Teach kunit.py to print a summarized list of failures if the # of tests
reachs an arbitrary threshold (>=100 tests).
To try and keep the output from being too long/noisy, this new logic
a) just reports "parent_test failed" if every child test failed
b) won't print anything if there are >10 failures (also arbitrary).
With this patch, we get an extra line of output showing:
> Testing complete. Ran 408 tests: passed: 392, failed: 9, skipped: 7
> Failures: hw_breakpoint
This also works with parameterized tests, e.g. if I add a fake failure
> Failures: kcsan.test_atomic_builtins_missing_barrier.threads=6
Note: we didn't have enough tests for this to be a problem before.
But with commit 980ac3ad0512 ("kunit: tool: rename all_test_uml.config,
use it for --alltests"), --alltests works and thus running >100 tests
will probably become more common.
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Currently, if you run
$ ./tools/testing/kunit/kunit_tool_test.py
you'll see a lot of output from the parser as we feed it testdata.
This makes the output hard to read and fairly confusing, esp. since our
testdata includes example failures, which get printed out in red.
Silence that output so real failures are easier to see.
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Remove the completed items from TODO list.
Signed-off-by: Shaoqin Huang <[email protected]>
Signed-off-by: Mike Rapoport <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Reserve 129th region in the memblock, and this will trigger the
memblock_double_array() function, this needs valid memory regions. So
using dummy_physical_memory_init() to allocate a valid memory region.
At the same time, reserve 128 faked memory region, and make sure these
reserved region not intersect with the valid memory region. So
memblock_double_array() will choose the valid memory region, and it will
success.
Also need to restore the reserved.regions after memblock_double_array(),
to make sure the subsequent tests can run as normal.
Signed-off-by: Shaoqin Huang <[email protected]>
Signed-off-by: Mike Rapoport <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add 129th region into the memblock, and this will trigger the
memblock_double_array() function, this needs valid memory regions. So
using dummy_physical_memory_init() to allocate a large enough memory
region, and split it into a large enough memory which can be choosed by
memblock_double_array(), and the left memory will be split into small
memory region, and add them into the memblock. It make sure the
memblock_double_array() will always choose the valid memory region that
is allocated by the dummy_physical_memory_init().
So memblock_double_array() must success.
Another thing should be done is to restore the memory.regions after
memblock_double_array(), due to now the memory.regions is pointing to a
memory region allocated by dummy_physical_memory_init(). And it will
affect the subsequent tests if we don't restore the memory region. So
simply record the origin region, and restore it after the test.
Signed-off-by: Shaoqin Huang <[email protected]>
Signed-off-by: Mike Rapoport <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Some small driver fixes for 6.1-rc3. They include:
- iio driver bugfixes
- counter driver bugfixes
- coresight bugfixes, including a revert and then a second fix to get
it right.
All of these have been in linux-next with no reported problems"
* tag 'char-misc-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
misc: sgi-gru: use explicitly signed char
coresight: cti: Fix hang in cti_disable_hw()
Revert "coresight: cti: Fix hang in cti_disable_hw()"
counter: 104-quad-8: Fix race getting function mode and direction
counter: microchip-tcb-capture: Handle Signal1 read and Synapse
coresight: cti: Fix hang in cti_disable_hw()
coresight: Fix possible deadlock with lock dependency
counter: ti-ecap-capture: fix IS_ERR() vs NULL check
counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
iio: bmc150-accel-core: Fix unsafe buffer attributes
iio: adxl367: Fix unsafe buffer attributes
iio: adxl372: Fix unsafe buffer attributes
iio: at91-sama5d2_adc: Fix unsafe buffer attributes
iio: temperature: ltc2983: allocate iio channels once
tools: iio: iio_utils: fix digit calculation
iio: adc: stm32-adc: fix channel sampling time init
iio: adc: mcp3911: mask out device ID in debug prints
iio: adc: mcp3911: use correct id bits
iio: adc: mcp3911: return proper error code on failure to allocate trigger
iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bug
...
|
|
Fix warnings and enable Wall.
pidfd_wait.c: In function ‘wait_nonblock’:
pidfd_wait.c:150:13: warning: unused variable ‘status’ [-Wunused-variable]
150 | int pidfd, status = 0;
| ^~~~~~
...
pidfd_test.c: In function ‘child_poll_exec_test’:
pidfd_test.c:438:1: warning: no return statement in function returning non-void [-Wreturn-type]
438 | }
| ^
Signed-off-by: Li Zhijian <[email protected]>
v2: fix mistake assignment to pidfd
Signed-off-by: Shuah Khan <[email protected]>
|
|
0Day/LKP observed that the kselftest blocks forever since one of the
pidfd_wait doesn't terminate in 1 of 30 runs. After digging into
the source, we found that it blocks at:
ASSERT_EQ(sys_waitid(P_PIDFD, pidfd, &info, WCONTINUED, NULL), 0);
wait_states has below testing flow:
CHILD PARENT
---------------+--------------
1 STOP itself
2 WAIT for CHILD STOPPED
3 SIGNAL CHILD to CONT
4 CONT
5 STOP itself
5' WAIT for CHILD CONT
6 WAIT for CHILD STOPPED
The problem is that the kernel cannot ensure the order of 5 and 5', once
5 goes first, the test will fail.
we can reproduce it by:
$ while true; do make run_tests -C pidfd; done
Introduce a blocking read in child process to make sure the parent can
check its WCONTINUED.
CC: Philip Li <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Li Zhijian <[email protected]>
Reviewed-by: Christian Brauner (Microsoft) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These make the intel_pstate driver work as expected on all hybrid
platforms to date (regardless of possible platform firmware issues),
fix hybrid sleep on systems using suspend-to-idle by default, make the
generic power domains code handle disabled idle states properly and
update pm-graph.
Specifics:
- Make intel_pstate use what is known about the hardware instead of
relying on information from the platform firmware (ACPI CPPC in
particular) to establish the relationship between the HWP CPU
performance levels and frequencies on all hybrid platforms
available to date (Rafael Wysocki)
- Allow hybrid sleep to use suspend-to-idle as a system suspend
method if it is the current suspend method of choice (Mario
Limonciello)
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla)
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt)"
* tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Fix handling of unavailable/disabled idle states
pm-graph v5.10
cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores
cpufreq: intel_pstate: Read all MSRs on the target CPU
PM: hibernate: Allow hybrid sleep to work with s2idle
|
|
Paul and I got trapped a few times by not seeing the effects of applying
a patch to the nolibc source code until a "make clean" was issued in
the nolibc directory. It's particularly annoying when trying to confirm
that a proposed patch really solves a problem (or that reverting it
reintroduces the problem).
The reason for the sysroot not being rebuilt was that it can be quite
slow. But in fact it's only slow after a "make clean" issued at the
kernel's topdir, because it's the main "make headers" that can take a
tens of seconds; as long as "usr/include" still contains headers, the
"headers_install" phase is only a quick "rsync", and rebuilding the
whole nolibc sysroot takes a bit less than one second, which is perfectly
acceptable for a test, even more once the time lost caused by misleading
results is factored in.
This patch marks the sysroot target as phony and starts by clearing
the previous sysroot for the current architecture before reinstalling
it. Thanks to this, applying a patch to nolibc makes the effect
immediately visible to "make nolibc-test":
$ time make -j -C tools/testing/selftests/nolibc nolibc-test
make: Entering directory '/k/tools/testing/selftests/nolibc'
MKDIR sysroot/x86/include
make[1]: Entering directory '/k/tools/include/nolibc'
make[2]: Entering directory '/k'
make[2]: Leaving directory '/k'
make[2]: Entering directory '/k'
INSTALL /k/tools/testing/selftests/nolibc/sysroot/sysroot/include
make[2]: Leaving directory '/k'
make[1]: Leaving directory '/k/tools/include/nolibc'
CC nolibc-test
make: Leaving directory '/k/tools/testing/selftests/nolibc'
real 0m0.869s
user 0m0.716s
sys 0m0.149s
Cc: "Paul E. McKenney" <[email protected]>
Link: https://lore.kernel.org/all/20221021155645.GK5600@paulmck-ThinkPad-P17-Gen-1/
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This adds 7 combinations of input values for memcmp() using signed and
unsigned bytes, which will trigger on the original code before Rasmus'
fix. This is mostly aimed at helping backporters verify their work, and
showing how tests for corner cases can be added to the selftests suite.
Before the fix it reports:
12 memcmp_20_20 = 0 [OK]
13 memcmp_20_60 = -64 [OK]
14 memcmp_60_20 = 64 [OK]
15 memcmp_20_e0 = 64 [FAIL]
16 memcmp_e0_20 = -64 [FAIL]
17 memcmp_80_e0 = -96 [OK]
18 memcmp_e0_80 = 96 [OK]
And after:
12 memcmp_20_20 = 0 [OK]
13 memcmp_20_60 = -64 [OK]
14 memcmp_60_20 = 64 [OK]
15 memcmp_20_e0 = -192 [OK]
16 memcmp_e0_20 = 192 [OK]
17 memcmp_80_e0 = -96 [OK]
18 memcmp_e0_80 = 96 [OK]
Cc: Rasmus Villemoes <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The C standard says that memcmp() must treat the buffers as consisting
of "unsigned chars". If char happens to be unsigned, the casts are ok,
but then obviously the c1 variable can never contain a negative
value. And when char is signed, the casts are wrong, and there's still
a problem with using an 8-bit quantity to hold the difference, because
that can range from -255 to +255.
For example, assuming char is signed, comparing two 1-byte buffers,
one containing 0x00 and another 0x80, the current implementation would
return -128 for both memcmp(a, b, 1) and memcmp(b, a, 1), whereas one
of those should of course return something positive.
Signed-off-by: Rasmus Villemoes <[email protected]>
Fixes: 66b6f755ad45 ("rcutorture: Import a copy of nolibc")
Cc: [email protected] # v5.0+
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
When built at -Os, gcc-12 recognizes an strlen() pattern in nolibc_strlen()
and replaces it with a jump to strlen(), which is not defined as a symbol
and breaks compilation. Worse, when the function is called strlen(), the
function is simply replaced with a jump to itself, hence becomes an
infinite loop.
One way to avoid this is to always set -ffreestanding, but the calling
code doesn't know this and there's no way (either via attributes or
pragmas) to globally enable it from include files, effectively leaving
a painful situation for the caller.
Alexey suggested to place an empty asm() statement inside the loop to
stop gcc from recognizing a well-known pattern, which happens to work
pretty fine. At least it allows us to make sure our local definition
is not replaced with a self jump.
The function only needs to be renamed back to strlen() so that the symbol
exists, which implies that nolibc_strlen() which is used on variable
strings has to be declared as a macro that points back to it before the
strlen() macro is redifined.
It was verified to produce valid code with gcc 3.4 to 12.1 at different
optimization levels, and both with constant and variable strings.
In case this problem surfaces again in the future, an alternate approach
consisting in adding an optimize("no-tree-loop-distribute-patterns")
function attribute for gcc>=12 worked as well but is less pretty.
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 66b6f755ad45 ("rcutorture: Import a copy of nolibc")
Fixes: 96980b833a21 ("tools/nolibc/string: do not use __builtin_strlen() at -O0")
Cc: "Paul E. McKenney" <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
ACPICA commit 8ac4e5116f59d6f9ba2fbeb9ce22ab58237a278f
Finish support for the CDAT table, in both the data table compiler and
the disassembler.
Link: https://github.com/acpica/acpica/commit/8ac4e511
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Tag "guest_saw_irq" as "volatile" to ensure that the compiler will never
optimize away lookups. Relying on the compiler thinking that the flag
is global and thus might change also works, but it's subtle, less robust,
and looks like a bug at first glance, e.g. risks being "fixed" and
breaking the test.
Make the flag "static" as well since convincing the compiler it's global
is no longer necessary.
Alternatively, the flag could be accessed with {READ,WRITE}_ONCE(), but
literally every access would need the wrappers, and eking out performance
isn't exactly top priority for selftests.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Tests for races between shinfo_cache (de)activation and hypercall+ioctl()
processing. KVM has had bugs where activating the shared info cache
multiple times and/or with concurrent users results in lock corruption,
NULL pointer dereferences, and other fun.
For the timer injection testcase (#22), re-arm the timer until the IRQ
is successfully injected. If the timer expires while the shared info
is deactivated (invalid), KVM will drop the event.
Signed-off-by: Michal Luczaj <[email protected]>
Co-developed-by: Sean Christopherson <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
dependency
Now that we have a good way to specify dependency of tests on programs,
convert some of the tracer tests to use this method for specifying
dependency on 'chrt'.
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
All these tests depend on the ping command and will fail if it is not
found. Allow tests to specify dependencies on programs through the
'requires' field. Add dependency on 'ping' for some of the trigger
tests.
Link: https://lore.kernel.org/all/[email protected]/
Reported-by: Akanksha J N <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Suggested-by: Steven Rostedt (Google) <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
2871edb32f46 ("can: kvaser_usb: Fix possible completions during init_completion")
abb8670938b2 ("can: kvaser_usb_leaf: Ignore stale bus-off after start")
8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from 802.15.4 (Zigbee et al).
Current release - regressions:
- ipa: fix bugs in the register conversion for IPA v3.1 and v3.5.1
Current release - new code bugs:
- mptcp: fix abba deadlock on fastopen
- eth: stmmac: rk3588: allow multiple gmac controllers in one system
Previous releases - regressions:
- ip: rework the fix for dflt addr selection for connected nexthop
- net: couple more fixes for misinterpreting bits in struct page
after the signature was added
Previous releases - always broken:
- ipv6: ensure sane device mtu in tunnels
- openvswitch: switch from WARN to pr_warn on a user-triggerable path
- ethtool: eeprom: fix null-deref on genl_info in dump
- ieee802154: more return code fixes for corner cases in
dgram_sendmsg
- mac802154: fix link-quality-indicator recording
- eth: mlx5: fixes for IPsec, PTP timestamps, OvS and conntrack
offload
- eth: fec: limit register access on i.MX6UL
- eth: bcm4908_enet: update TX stats after actual transmission
- can: rcar_canfd: improve IRQ handling for RZ/G2L
Misc:
- genetlink: piggy back on the newly added resv_op_start to enforce
more sanity checks on new commands"
* tag 'net-6.1-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
net: enetc: survive memory pressure without crashing
kcm: do not sense pfmemalloc status in kcm_sendpage()
net: do not sense pfmemalloc status in skb_append_pagefrags()
net/mlx5e: Fix macsec sci endianness at rx sa update
net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
net/mlx5e: Fix macsec rx security association (SA) update/delete
net/mlx5e: Fix macsec coverity issue at rx sa update
net/mlx5: Fix crash during sync firmware reset
net/mlx5: Update fw fatal reporter state on PCI handlers successful recover
net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed
net/mlx5e: TC, Reject forwarding from internal port to internal port
net/mlx5: Fix possible use-after-free in async command interface
net/mlx5: ASO, Create the ASO SQ with the correct timestamp format
net/mlx5e: Update restore chain id for slow path packets
net/mlx5e: Extend SKB room check to include PTP-SQ
net/mlx5: DR, Fix matcher disconnect error flow
net/mlx5: Wait for firmware to enable CRS before pci_restore_state
net/mlx5e: Do not increment ESN when updating IPsec ESN state
netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed
netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed
...
|
|
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use the global quiet variable everywhere so that all tools hide warnings
in quiet mode and update the documentation to reflect this.
'perf probe' claimed that errors are not printed in quiet mode but I
don't see this so remove it from the docs.
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
warnings in quiet mode
Especially when CONFIG_LOCKDEP and other debug configs are enabled,
Perf can print the following warning when running the "kernel lock
contention analysis" test:
Warning:
Processed 1378918 events and lost 4 chunks!
Check IO/CPU overload!
Warning:
Processed 4593325 samples and lost 70.00%!
The test already supplies -q to run in quiet mode, so extend quiet mode
to perf_stdio__warning() and also ui__warning() for consistency.
This fixes the following failure due to the extra lines counted:
perf test "lock cont" -vvv
82: kernel lock contention analysis test :
--- start ---
test child forked, pid 3125
Testing perf lock record and perf lock contention
[Fail] Recorded result count is not 1: 9
test child finished with -1
---- end ----
kernel lock contention analysis test: FAILED!
Fixes: ec685de25b6718f8 ("perf test: Add kernel lock contention test")
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It now has 4 sub tests and at least one of them should run.
But once the TEST_SKIP (= 2) return value is set, it won't be
overwritten unless there's a failure. I think we should return success
when one or more tests are skipped but the remaining subtests are
passed.
So update the test code not to set the err variable when it skips
the test.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The --threads option changed the 'perf record' behavior significantly,
so it'd be nice if we test it separately. Add --threads options with
different argument in each test supported and check the result.
Also update the cleanup routine because threads recording produces data
in a directory.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a subtest which profiles the given workload on the command line.
As it's a minimal requirement, the test should run ok so it doesn't skip
the test even if it failed to run the 'perf record' command.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|