| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
To make the code more obvious and hopefully simpler, factor out the
code for each output mode - stdio, CSV, JSON.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The --interval-clear option makes perf stat to clear the terminal at
each interval. But it doesn't need to clear the screen when it saves
to a file. Make it fail when it's enabled with the output options.
$ perf stat -I 1 --interval-clear -o myfile true
--interval-clear does not work with output
Usage: perf stat [<options>] [<command>]
-o, --output <file> output file name
--log-fd <n> log output to fd, instead of stderr
--interval-clear clear screen in between new interval
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Enable unprivileged bpf for selftests kernel by default.
This forces CI to run test_verifier tests in both privileged
and unprivileged modes.
The test_verifier.c:do_test uses sysctl kernel.unprivileged_bpf_disabled
to decide whether to run or to skip test cases in unprivileged mode.
The CONFIG_BPF_UNPRIV_DEFAULT_OFF controls the default value of the
kernel.unprivileged_bpf_disabled.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
If the parameters for batch are more than 2, check argc first can
return immediately, no need to use is_prefix() to check "file" with
a little overhead and then check argc, it is better to check "file"
only when the parameters for batch are 2.
Signed-off-by: Tiezhu Yang <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Verify that nullness information is porpagated in the branches of
register to register JEQ and JNE operations.
Signed-off-by: Eduard Zingerman <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
There is no point in failing the tests when RTC is not present.
Reported-by: Linux Kernel Functional Testing <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Tested-by: Daniel Diaz <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
DE_CFG contains the LFENCE serializing bit, restore it on resume too.
This is relevant to older families due to the way how they do S3.
Unify and correct naming while at it.
Fixes: e4d0e84e4907 ("x86/cpu/AMD: Make LFENCE a serializing instruction")
Reported-by: Andrew Cooper <[email protected]>
Reported-by: Pawan Gupta <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Previously print_pmu_events() would compute the values to be printed,
place them in struct sevent, sort them and then print them.
Modify the code so that struct sevent holds just the PMU and event, sort
these and then in the main print loop calculate aliases for names, etc.
This avoids memory allocations for copied values as they are computed
then printed.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Xin Gao <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The current code computes an array of symbol names then sorts and prints
them. Use a strlist to create a list of names that is sorted and then
print it.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Xin Gao <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The current code computes an array of cache names then sorts and prints
them. Use a strlist to create a list of names that is sorted. Keep the
hybrid names, it is unclear how to generalize it, but drop the
computation of evt_pmus that is never used.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kang Minchul <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Xin Gao <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
[ Fixed up clash with cf9f67b36303de65 ("perf print-events: Remove redundant comparison with zero")]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Deprecate the --cputype option and add a --unit option where '--unit
cpu_atom' behaves like '--cputype atom'. The --unit option can be used
with arbitrary PMUs, for example:
```
$ perf list --unit msr pmu
List of pre-defined events (to be used in -e or -M):
msr/aperf/ [Kernel PMU event]
msr/cpu_thermal_margin/ [Kernel PMU event]
msr/mperf/ [Kernel PMU event]
msr/pperf/ [Kernel PMU event]
msr/smi/ [Kernel PMU event]
msr/tsc/ [Kernel PMU event]
```
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Xin Gao <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In print_tracepoint_events() use tracing_events__scandir_alphasort() and
scandir alphasort so that the subsystem and events are sorted and don't
need a secondary qsort. Locally this results in the following change:
...
ext4:ext4_zero_range [Tracepoint event]
- fib6:fib6_table_lookup [Tracepoint event]
fib:fib_table_lookup [Tracepoint event]
+ fib6:fib6_table_lookup [Tracepoint event]
filelock:break_lease_block [Tracepoint event]
...
ie fib6 now is after fib and not before it. This is more consistent
with how numbers are more generally sorted, such as:
...
syscalls:sys_enter_renameat [Tracepoint event]
syscalls:sys_enter_renameat2 [Tracepoint event]
...
and so an improvement over the qsort approach.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Xin Gao <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
tracing_events__opendir() allows iteration over files in
<debugfs>/tracing/events but with an arbitrary sort order.
Add a scandir alternative where the results are alphabetically sorted.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Xin Gao <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add documentation to 'struct perf_pmu' and the associated structs of
'perf_pmu_alias' and 'perf_pmu_format'.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Xin Gao <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Replace usage with perf_pmu__is_hybrid().
Suggested-by: Kan Liang <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Xin Gao <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently, verifier uses MEM_ALLOC type tag to specially tag memory
returned from bpf_ringbuf_reserve helper. However, this is currently
only used for this purpose and there is an implicit assumption that it
only refers to ringbuf memory (e.g. the check for ARG_PTR_TO_ALLOC_MEM
in check_func_arg_reg_off).
Hence, rename MEM_ALLOC to MEM_RINGBUF to indicate this special
relationship and instead open the use of MEM_ALLOC for more generic
allocations made for user types.
Also, since ARG_PTR_TO_ALLOC_MEM_OR_NULL is unused, simply drop it.
Finally, update selftests using 'alloc_' verifier string to 'ringbuf_'.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add the support on the map side to parse, recognize, verify, and build
metadata table for a new special field of the type struct bpf_list_head.
To parameterize the bpf_list_head for a certain value type and the
list_node member it will accept in that value type, we use BTF
declaration tags.
The definition of bpf_list_head in a map value will be done as follows:
struct foo {
struct bpf_list_node node;
int data;
};
struct map_value {
struct bpf_list_head head __contains(foo, node);
};
Then, the bpf_list_head only allows adding to the list 'head' using the
bpf_list_node 'node' for the type struct foo.
The 'contains' annotation is a BTF declaration tag composed of four
parts, "contains:name:node" where the name is then used to look up the
type in the map BTF, with its kind hardcoded to BTF_KIND_STRUCT during
the lookup. The node defines name of the member in this type that has
the type struct bpf_list_node, which is actually used for linking into
the linked list. For now, 'kind' part is hardcoded as struct.
This allows building intrusive linked lists in BPF, using container_of
to obtain pointer to entry, while being completely type safe from the
perspective of the verifier. The verifier knows exactly the type of the
nodes, and knows that list helpers return that type at some fixed offset
where the bpf_list_node member used for this list exists. The verifier
also uses this information to disallow adding types that are not
accepted by a certain list.
For now, no elements can be added to such lists. Support for that is
coming in future patches, hence draining and freeing items is done with
a TODO that will be resolved in a future patch.
Note that the bpf_list_head_free function moves the list out to a local
variable under the lock and releases it, doing the actual draining of
the list items outside the lock. While this helps with not holding the
lock for too long pessimizing other concurrent list operations, it is
also necessary for deadlock prevention: unless every function called in
the critical section would be notrace, a fentry/fexit program could
attach and call bpf_map_update_elem again on the map, leading to the
same lock being acquired if the key matches and lead to a deadlock.
While this requires some special effort on part of the BPF programmer to
trigger and is highly unlikely to occur in practice, it is always better
if we can avoid such a condition.
While notrace would prevent this, doing the draining outside the lock
has advantages of its own, hence it is used to also fix the deadlock
related problem.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
test_cpuset_prs.sh is failing with the following error:
test_cpuset_prs.sh: line 29: [[: 8
57%: syntax error in expression (error token is "57%")
This is happening because `lscpu | grep "^CPU(s)"` returns two lines in
some systems (such as Debian unstable):
# lscpu | grep "^CPU(s)"
CPU(s): 8
CPU(s) scaling MHz: 55%
This is a simple fix that discard the second line.
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Kamalesh Babulal <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Fixed some checkpatch issues in ringbuf.c
Signed-off-by: Kang Minchul <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fixed following checkpatch issues:
WARNING: Block comments use a trailing */ on a separate line
+ * other BPF program's BTF object */
WARNING: Possible repeated word: 'be'
+ * name. This is important to be be able to find corresponding BTF
ERROR: switch and case should be at the same indent
+ switch (ext->kcfg.sz) {
+ case 1: *(__u8 *)ext_val = value; break;
+ case 2: *(__u16 *)ext_val = value; break;
+ case 4: *(__u32 *)ext_val = value; break;
+ case 8: *(__u64 *)ext_val = value; break;
+ default:
ERROR: trailing statements should be on next line
+ case 1: *(__u8 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 2: *(__u16 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 4: *(__u32 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 8: *(__u64 *)ext_val = value; break;
ERROR: code indent should use tabs where possible
+ }$
WARNING: please, no spaces at the start of a line
+ }$
WARNING: Block comments use a trailing */ on a separate line
+ * for faster search */
ERROR: code indent should use tabs where possible
+^I^I^I^I^I^I &ext->kcfg.is_signed);$
WARNING: braces {} are not necessary for single statement blocks
+ if (err) {
+ return err;
+ }
ERROR: code indent should use tabs where possible
+^I^I^I^I sizeof(*obj->btf_modules), obj->btf_module_cnt + 1);$
Signed-off-by: Kang Minchul <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fixed some checkpatch issues in btf.c
Signed-off-by: Kang Minchul <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
We need to pass '*link' to final libbpf_get_error,
because that one holds the return value, not 'link'.
Fixes: 4fa5bcfe07f7 ("libbpf: Allow BPF program auto-attach handlers to bail out")
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
It should have a comma after 'cpus' for socket and die aggregation mode.
The output of the following command shows the issue.
$ sudo perf stat -a --per-socket -x, --metric-only -I1 true
Before:
+--- here
V
time,socket,cpusGhz,insn per cycle,branch-misses of all branches,
0.000908461,S0,8,0.950,1.65,1.21,
After:
time,socket,cpus,GHz,insn per cycle,branch-misses of all branches,
0.000683094,S0,8,0.593,2.00,0.60,
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It should not print "summary" for each event when --metric-only is set.
Before:
$ sudo perf stat -a --per-socket --summary -x, --metric-only true
time,socket,cpusGhz,insn per cycle,branch-misses of all branches,
0.000709079,S0,8,0.893,2.40,0.45,
S0,8, summary, summary, summary, summary, summary,0.893, summary,2.40, summary, summary,0.45,
After:
$ sudo perf stat -a --per-socket --summary -x, --metric-only true
time,socket,cpusGHz,insn per cycle,branch-misses of all branches,
0.000882297,S0,8,0.598,1.64,0.64,
summary,S0,8,0.598,1.64,0.64,
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up fixes that went thru perf/urgent.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In preparation for cxl_acpi walking pci_root->bus->bridge, add that
association to the mock pci_root instances.
Note that the missing 3rd entry in mock_pci_root[] was not noticed until
now given that the test version of to_cxl_host_bridge()
(tools/testing/cxl/mock_acpi.c), obviated the need for that entry.
However, "cxl/acpi: Improve debug messages in cxl_acpi_probe()" [1]
needs pci_root->bus->bridge to be populated.
Link: https://lore.kernel.org/r/[email protected] [1]
Cc: Robert Richter <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
CXL dports are added in a couple of code paths using
devm_cxl_add_dport(). Debug messages are individually generated, but are
incomplete and inconsistent. Change this by moving its generation to
devm_cxl_add_dport(). This unifies the messages and reduces code
duplication. Also, generate messages on failure. Use a
__devm_cxl_add_dport() wrapper to keep the readability of the error
exits.
Signed-off-by: Robert Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
In some platform, the schedule event may came slowly, delay 100ms can't
cover it.
I was notice that on my board which running in low cpu_freq,and this
selftests allways gose fail.
So maybe we can check more times here to wait longer.
Fixes: 43bb45da82f9 ("selftests: ftrace: Add a selftest to test event enable/disable func trigger")
Signed-off-by: Yipeng Zou <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
GCC 11.3.0 fails to compile btf_dump.c due to the following error,
which seems to originate in btf_dump_struct_data where the returned
value would be uninitialized if btf_vlen returns zero.
btf_dump.c: In function ‘btf_dump_dump_type_data’:
btf_dump.c:2363:12: error: ‘err’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2363 | if (err < 0)
| ^
Fixes: 920d16af9b42 ("libbpf: BTF dumper support for typed data")
Signed-off-by: David Michael <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Acked-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The pm variable holds an appropriate function to print metrics for CSV
anf JSON already. So we can combine the if statement to simplify the
code a little bit. This also matches to the above condition for non-CSV
and non-JSON case.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The num_print_interval and config->interval_clear should be checked
together like other places like later in the function. Otherwise,
the --interval-clear option could print the headers for the CSV or
JSON output unnecessarily.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It missed to print a matching header line for intervals.
Before:
# perf stat -a -e cycles,instructions --metric-only -j -I 500
{"unit" : "insn per cycle"}
{"interval" : 0.500544283}{"metric-value" : "1.96"}
^C
After:
# perf stat -a -e cycles,instructions --metric-only -j -I 500
{"unit" : "sec"}{"unit" : "insn per cycle"}
{"interval" : 0.500515681}{"metric-value" : "2.31"}
^C
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently --metric-only with --json indents header lines. This is not
needed for JSON.
$ perf stat -aA --metric-only -j true
{"unit" : "GHz"}{"unit" : "insn per cycle"}{"unit" : "branch-misses of all branches"}
{"cpu" : "0", {"metric-value" : "0.101"}{"metric-value" : "0.86"}{"metric-value" : "1.91"}
{"cpu" : "1", {"metric-value" : "0.102"}{"metric-value" : "0.87"}{"metric-value" : "2.02"}
{"cpu" : "2", {"metric-value" : "0.085"}{"metric-value" : "1.02"}{"metric-value" : "1.69"}
...
Note that the other lines are broken JSON, but it will be handled later.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently it prints all metric headers for JSON output. But actually it
skips some metrics with valid_only_metric(). So the output looks like:
$ perf stat --metric-only --json true
{"unit" : "CPUs utilized", "unit" : "/sec", "unit" : "/sec", "unit" : "/sec", "unit" : "GHz", "unit" : "insn per cycle", "unit" : "/sec", "unit" : "branch-misses of all branches"}
{"metric-value" : "3.861"}{"metric-value" : "0.79"}{"metric-value" : "3.04"}
As you can see there are 8 units in the header but only 3 metric-values
are there. It should skip the unused headers as well. Also each unit
should be printed as a separate object like metric values.
With this patch:
$ perf stat --metric-only --json true
{"unit" : "GHz"}{"unit" : "insn per cycle"}{"unit" : "branch-misses of all branches"}
{"metric-value" : "4.166"}{"metric-value" : "0.73"}{"metric-value" : "2.96"}
Fixes: df936cadfb58ba93 ("perf stat: Add JSON output option")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Claire Jensen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The struct perf_stat_output_ctx is set in a loop with the same values.
Move the code out of the loop and keep the loop minimal.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The --interval-clear option makes perf stat to clear the terminal at
each interval. But it doesn't need to clear the screen when it saves
to a file.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When perf stat is called with very detailed events, the output doesn't
align well like below:
$ sudo perf stat -a -ddd sleep 1
Performance counter stats for 'system wide':
8,020.23 msec cpu-clock # 7.997 CPUs utilized
3,970 context-switches # 494.998 /sec
169 cpu-migrations # 21.072 /sec
586 page-faults # 73.065 /sec
649,568,060 cycles # 0.081 GHz (30.42%)
304,044,345 instructions # 0.47 insn per cycle (38.40%)
60,313,022 branches # 7.520 M/sec (38.89%)
2,766,919 branch-misses # 4.59% of all branches (39.26%)
74,422,951 L1-dcache-loads # 9.279 M/sec (39.39%)
8,025,568 L1-dcache-load-misses # 10.78% of all L1-dcache accesses (39.22%)
3,314,995 LLC-loads # 413.329 K/sec (30.83%)
1,225,619 LLC-load-misses # 36.97% of all LL-cache accesses (30.45%)
<not supported> L1-icache-loads
20,420,493 L1-icache-load-misses # 0.00% of all L1-icache accesses (30.29%)
58,017,947 dTLB-loads # 7.234 M/sec (30.37%)
704,677 dTLB-load-misses # 1.21% of all dTLB cache accesses (30.27%)
234,225 iTLB-loads # 29.204 K/sec (30.29%)
417,166 iTLB-load-misses # 178.10% of all iTLB cache accesses (30.32%)
<not supported> L1-dcache-prefetches
<not supported> L1-dcache-prefetch-misses
1.002947355 seconds time elapsed
Increase the METRIC_LEN by 3 so that it can align properly.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix following coccicheck warning:
tools/testing/selftests/arm64/mte/check_mmap_options.c:64:24-25:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:66:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:135:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:96:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:190:24-25:
WARNING: Use ARRAY_SIZE
Signed-off-by: KaiLong Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
'time' is the local variable of run_test() function, while 'max_time' is
the local variable of do_transfer() function. So in do_transfer(),
$max_time should be used, not $time.
Please note that here $time == $max_time so the behaviour is not changed
but the right variable is used.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:
====================
bpf-next 2022-11-11
We've added 49 non-merge commits during the last 9 day(s) which contain
a total of 68 files changed, 3592 insertions(+), 1371 deletions(-).
The main changes are:
1) Veristat tool improvements to support custom filtering, sorting, and replay
of results, from Andrii Nakryiko.
2) BPF verifier precision tracking fixes and improvements,
from Andrii Nakryiko.
3) Lots of new BPF documentation for various BPF maps, from Dave Tucker,
Donald Hunter, Maryam Tahhan, Bagas Sanjaya.
4) BTF dedup improvements and libbpf's hashmap interface clean ups, from
Eduard Zingerman.
5) Fix veth driver panic if XDP program is attached before veth_open, from
John Fastabend.
6) BPF verifier clean ups and fixes in preparation for follow up features,
from Kumar Kartikeya Dwivedi.
7) Add access to hwtstamp field from BPF sockops programs,
from Martin KaFai Lau.
8) Various fixes for BPF selftests and samples, from Artem Savkov,
Domenico Cerasuolo, Kang Minchul, Rong Tao, Yang Jihong.
9) Fix redirection to tunneling device logic, preventing skb->len == 0, from
Stanislav Fomichev.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
selftests/bpf: fix veristat's singular file-or-prog filter
selftests/bpf: Test skops->skb_hwtstamp
selftests/bpf: Fix incorrect ASSERT in the tcp_hdr_options test
bpf: Add hwtstamp field for the sockops prog
selftests/bpf: Fix xdp_synproxy compilation failure in 32-bit arch
bpf, docs: Document BPF_MAP_TYPE_ARRAY
docs/bpf: Document BPF map types QUEUE and STACK
docs/bpf: Document BPF ARRAY_OF_MAPS and HASH_OF_MAPS
docs/bpf: Document BPF_MAP_TYPE_CPUMAP map
docs/bpf: Document BPF_MAP_TYPE_LPM_TRIE map
libbpf: Hashmap.h update to fix build issues using LLVM14
bpf: veth driver panics when xdp prog attached before veth_open
selftests: Fix test group SKIPPED result
selftests/bpf: Tests for btf_dedup_resolve_fwds
libbpf: Resolve unambigous forward declarations
libbpf: Hashmap interface update to allow both long and void* keys/values
samples/bpf: Fix sockex3 error: Missing BPF prog type
selftests/bpf: Fix u32 variable compared with less than zero
Documentation: bpf: Escape underscore in BPF type name prefix
selftests/bpf: Use consistent build-id type for liburandom_read.so
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Andrii Nakryiko says:
====================
bpf 2022-11-11
We've added 11 non-merge commits during the last 8 day(s) which contain
a total of 11 files changed, 83 insertions(+), 74 deletions(-).
The main changes are:
1) Fix strncpy_from_kernel_nofault() to prevent out-of-bounds writes,
from Alban Crequy.
2) Fix for bpf_prog_test_run_skb() to prevent wrong alignment,
from Baisong Zhong.
3) Switch BPF_DISPATCHER to static_call() instead of ftrace infra, with
a small build fix on top, from Peter Zijlstra and Nathan Chancellor.
4) Fix memory leak in BPF verifier in some error cases, from Wang Yufen.
5) 32-bit compilation error fixes for BPF selftests, from Pu Lehui and
Yang Jihong.
6) Ensure even distribution of per-CPU free list elements, from Xu Kuohai.
7) Fix copy_map_value() to track special zeroed out areas properly,
from Xu Kuohai.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix offset calculation error in __copy_map_value and zero_map_value
bpf: Initialize same number of free nodes for each pcpu_freelist
selftests: bpf: Add a test when bpf_probe_read_kernel_str() returns EFAULT
maccess: Fix writing offset in case of fault in strncpy_from_kernel_nofault()
selftests/bpf: Fix test_progs compilation failure in 32-bit arch
selftests/bpf: Fix casting error when cross-compiling test_verifier for 32-bit platforms
bpf: Fix memory leaks in __check_func_call
bpf: Add explicit cast to 'void *' for __BPF_DISPATCHER_UPDATE()
bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)
bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")
bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb()
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes.
Eight are cc:stable and the remainder address issues which were
introduced post-6.0 or which aren't considered serious enough to
justify a -stable backport"
* tag 'mm-hotfixes-stable-2022-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
docs: kmsan: fix formatting of "Example report"
mm/damon/dbgfs: check if rm_contexts input is for a real context
maple_tree: don't set a new maximum on the node when not reusing nodes
maple_tree: fix depth tracking in maple_state
arch/x86/mm/hugetlbpage.c: pud_huge() returns 0 when using 2-level paging
fs: fix leaked psi pressure state
nilfs2: fix use-after-free bug of ns_writer on remount
x86/traps: avoid KMSAN bugs originating from handle_bug()
kmsan: make sure PREEMPT_RT is off
Kconfig.debug: ensure early check for KMSAN in CONFIG_KMSAN_WARN
x86/uaccess: instrument copy_from_user_nmi()
kmsan: core: kmsan_in_runtime() should return true in NMI context
mm: hugetlb_vmemmap: include missing linux/moduleparam.h
mm/shmem: use page_mapping() to detect page cache for uffd continue
mm/memremap.c: map FS_DAX device memory as decrypted
Partly revert "mm/thp: carry over dirty bit when thp splits on pmd"
nilfs2: fix deadlock in nilfs_count_free_blocks()
mm/mmap: fix memory leak in mmap_region()
hugetlbfs: don't delete error page from pagecache
maple_tree: reorganize testing to restore module testing
...
|
|
Fix the bug of filtering out filename too early, before we know the
program name, if using unified file-or-prog filter (i.e., -f
<any-glob>). Because we try to filter BPF object file early without
opening and parsing it, if any_glob (file-or-prog) filter is used we
have to accept any filename just to get program name, which might match
any_glob.
Fixes: 10b1b3f3e56a ("selftests/bpf: consolidate and improve file/prog filtering in veristat")
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Pull io_uring fixes from Jens Axboe:
"Nothing major, just a few minor tweaks:
- Tweak for the TCP zero-copy io_uring self test (Pavel)
- Rather than use our internal cached value of number of CQ events
available, use what the user can see (Dylan)
- Fix a typo in a comment, added in this release (me)
- Don't allow wrapping while adding provided buffers (me)
- Fix a double poll race, and add a lockdep assertion for it too
(Pavel)"
* tag 'io_uring-6.1-2022-11-11' of git://git.kernel.dk/linux:
io_uring/poll: lockdep annote io_poll_req_insert_locked
io_uring/poll: fix double poll req->flags races
io_uring: check for rollover of buffer ID when providing buffers
io_uring: calculate CQEs from the user visible value
io_uring: fix typo in io_uring.h comment
selftests/net: don't tests batched TCP io_uring zc
|
|
This patch tests reading the skops->skb_hwtstamp field.
A local test was also done such that the shinfo hwtstamp was temporary
set to a non zero value in the kernel bpf_skops_parse_hdr()
and the same value can be read by the skops test.
An adjustment is needed to the btf_dump selftest because
the changes in the 'struct bpf_sock_ops'.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch fixes the incorrect ASSERT test in tcp_hdr_options during
the CHECK to ASSERT macro cleanup.
Fixes: 3082f8cd4ba3 ("selftests/bpf: Convert tcp_hdr_options test to ASSERT_* macros")
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Wang Yufen <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The bpf-tc prog has already been able to access the
skb_hwtstamps(skb)->hwtstamp. This patch extends the same hwtstamp
access to the sockops prog.
In sockops, the skb is also available to the bpf prog during
the BPF_SOCK_OPS_PARSE_HDR_OPT_CB event. There is a use case
that the hwtstamp will be useful to the sockops prog to better
measure the one-way-delay when the sender has put the tx
timestamp in the tcp header option.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
xdp_synproxy fails to be compiled in the 32-bit arch, log is as follows:
xdp_synproxy.c: In function 'parse_options':
xdp_synproxy.c:175:36: error: left shift count >= width of type [-Werror=shift-count-overflow]
175 | *tcpipopts = (mss6 << 32) | (ttl << 24) | (wscale << 16) | mss4;
| ^~
xdp_synproxy.c: In function 'syncookie_open_bpf_maps':
xdp_synproxy.c:289:28: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
289 | .map_ids = (__u64)map_ids,
| ^
Fix it.
Fixes: fb5cd0ce70d4 ("selftests/bpf: Add selftests for raw syncookie helpers")
Signed-off-by: Yang Jihong <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This commit tests previous fix of bpf_probe_read_kernel_str().
The BPF helper bpf_probe_read_kernel_str should return -EFAULT when
given a bad source pointer and the target buffer should only be modified
to make the string NULL terminated.
bpf_probe_read_kernel_str() was previously inserting a NULL before the
beginning of the dst buffer. This test should ensure that the
implementation stays correct for now on.
Without the fix, this test will fail as follows:
$ cd tools/testing/selftests/bpf
$ make
$ sudo ./test_progs --name=varlen
...
test_varlen:FAIL:check got 0 != exp 66
Signed-off-by: Alban Crequy <[email protected]>
Signed-off-by: Francis Laniel <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Changes v1 to v2:
- add ack tag
- fix my email
- rebase on bpf tree and tag for bpf tree
|
|
A fix for the LLVM compilation error while building bpftool.
Replaces the expression:
_Static_assert((p) == NULL || ...)
by expression:
_Static_assert((__builtin_constant_p((p)) ? (p) == NULL : 0) || ...)
When "p" is not a constant the former is not considered to be a
constant expression by LLVM 14.
The error was introduced in the following patch-set: [1].
The error was reported here: [2].
[1] https://lore.kernel.org/bpf/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/
Reported-by: kernel test robot <[email protected]>
Fixes: c302378bc157 ("libbpf: Hashmap interface update to allow both long and void* keys/values")
Signed-off-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|