Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch moves evts_ns1 and evts_ns2 out of do_transfer() as two global
variables in mptcp_join.sh. Init them in init() and remove them in
cleanup().
Add a new helper reset_with_events() to save the outputs of 'pm_nl_ctl
events' command in them. And a new helper kill_events_pids() to kill
pids of 'pm_nl_ctl events' command. Use these helpers in userspace pm
tests.
Suggested-by: Paolo Abeni <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds test coverage for listening sockets created by userspace
processes.
It adds a new test named test_listener() and a new verifying helper
verify_listener_events(). The new output looks like this:
CREATE_SUBFLOW 10.0.2.2 (ns2) => 10.0.2.1 (ns1) [OK]
DESTROY_SUBFLOW 10.0.2.2 (ns2) => 10.0.2.1 (ns1) [OK]
MP_PRIO TX [OK]
MP_PRIO RX [OK]
CREATE_LISTENER 10.0.2.2:37106 [OK]
CLOSE_LISTENER 10.0.2.2:37106 [OK]
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch makes server_evts and client_evts global in userspace_pm.sh,
then these two variables could be used in test_announce(), test_remove()
and test_subflows(). The local variable 'evts' in these three functions
then could be dropped.
Also move local variable 'file' as a global one.
Suggested-by: Paolo Abeni <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Some userspace pm tests failed since pm listener events have been added.
Now MPTCP_EVENT_LISTENER_CREATED event becomes the first item in the
events list like this:
type:15,family:2,sport:10006,saddr4:0.0.0.0
type:1,token:3701282876,server_side:1,family:2,saddr4:10.0.1.1,...
And no token value in this MPTCP_EVENT_LISTENER_CREATED event.
This patch fixes this by specifying the type 1 item to search for token
values.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Just to avoid classical Bash pitfall where variables are accidentally
overridden by other functions because the proper scope has not been
defined.
That's also what is done in other MPTCP selftests scripts where all non
local variables are defined at the beginning of the script and the
others are defined with the "local" keyword.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It is clearer to declare these global variables at the beginning of the
file as it is done in other MPTCP selftests rather than in functions in
the middle of the script.
So for uniformity reason, we can do the same here in mptcp_sockopt.sh.
Suggested-by: Geliang Tang <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The definition of 'rndh' was probably copied from one script to another
but some times, 'sec' was not defined, not used and/or not spelled
properly.
Here all the 'rndh' are now defined the same way.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Some variables were set but never used.
This was not causing any issues except adding some confusion and having
shellcheck complaining about them.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
A new "sandbox" net namespace is available where no other netfilter
rules have been added.
Use this new netns instead of re-using "ns1" and clean it.
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Modify list_push_pop_multiple to alloc and insert nodes 2-at-a-time.
Without the previous patch's fix, this block of code:
bpf_spin_lock(lock);
bpf_list_push_front(head, &f[i]->node);
bpf_list_push_front(head, &f[i + 1]->node);
bpf_spin_unlock(lock);
would fail check_reference_leak check as release_on_unlock logic would miss
a ref that should've been released.
Signed-off-by: Dave Marchevsky <[email protected]>
cc: Kumar Kartikeya Dwivedi <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Define and use kvm_static_assert() in the common KVM selftests headers to
provide deterministic behavior, and to allow creating static asserts
without dummy messages.
The kernel's static_assert() makes the message param optional, and on the
surface, tools/include/linux/build_bug.h appears to follow suit. However,
glibc may override static_assert() and redefine it as a direct alias of
_Static_assert(), which makes the message parameter mandatory. This leads
to non-deterministic behavior as KVM selftests code that utilizes
static_assert() without a custom message may or not compile depending on
the order of includes. E.g. recently added asserts in
x86_64/processor.h fail on some systems with errors like
In file included from lib/memstress.c:11:0:
include/x86_64/processor.h: In function ‘this_cpu_has_p’:
include/x86_64/processor.h:193:34: error: expected ‘,’ before ‘)’ token
static_assert(low_bit < high_bit); \
^
due to _Static_assert() expecting a comma before a message. The "message
optional" version of static_assert() uses macro magic to strip away the
comma when presented with empty an __VA_ARGS__
#ifndef static_assert
#define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
#define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
#endif // static_assert
and effectively generates "_Static_assert(expr, #expr)".
The incompatible version of static_assert() gets defined by this snippet
in /usr/include/assert.h:
#if defined __USE_ISOC11 && !defined __cplusplus
# undef static_assert
# define static_assert _Static_assert
#endif
which yields "_Static_assert(expr)" and thus fails as above.
KVM selftests don't actually care about using C11, but __USE_ISOC11 gets
defined because of _GNU_SOURCE, which many tests do #define. _GNU_SOURCE
triggers a massive pile of defines in /usr/include/features.h, including
_ISOC11_SOURCE:
/* If _GNU_SOURCE was defined by the user, turn on all the other features. */
#ifdef _GNU_SOURCE
# undef _ISOC95_SOURCE
# define _ISOC95_SOURCE 1
# undef _ISOC99_SOURCE
# define _ISOC99_SOURCE 1
# undef _ISOC11_SOURCE
# define _ISOC11_SOURCE 1
# undef _POSIX_SOURCE
# define _POSIX_SOURCE 1
# undef _POSIX_C_SOURCE
# define _POSIX_C_SOURCE 200809L
# undef _XOPEN_SOURCE
# define _XOPEN_SOURCE 700
# undef _XOPEN_SOURCE_EXTENDED
# define _XOPEN_SOURCE_EXTENDED 1
# undef _LARGEFILE64_SOURCE
# define _LARGEFILE64_SOURCE 1
# undef _DEFAULT_SOURCE
# define _DEFAULT_SOURCE 1
# undef _ATFILE_SOURCE
# define _ATFILE_SOURCE 1
#endif
which further down in /usr/include/features.h leads to:
/* This is to enable the ISO C11 extension. */
#if (defined _ISOC11_SOURCE \
|| (defined __STDC_VERSION__ && __STDC_VERSION__ >= 201112L))
# define __USE_ISOC11 1
#endif
To make matters worse, /usr/include/assert.h doesn't guard against
multiple inclusion by turning itself into a nop, but instead #undefs a
few macros and continues on. As a result, it's all but impossible to
ensure the "message optional" version of static_assert() will actually be
used, e.g. explicitly including assert.h and #undef'ing static_assert()
doesn't work as a later inclusion of assert.h will again redefine its
version.
#ifdef _ASSERT_H
# undef _ASSERT_H
# undef assert
# undef __ASSERT_VOID_CAST
# ifdef __USE_GNU
# undef assert_perror
# endif
#endif /* assert.h */
#define _ASSERT_H 1
#include <features.h>
Fixes: fcba483e8246 ("KVM: selftests: Sanity check input to ioctls() at build time")
Fixes: ee3795536664 ("KVM: selftests: Refactor X86_FEATURE_* framework to prep for X86_PROPERTY_*")
Fixes: 53a7dc0f215e ("KVM: selftests: Add X86_PROPERTY_* framework to retrieve CPUID values")
Signed-off-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Move the AMX test's kvm_cpu_has() checks before creating the VM+vCPU,
there are no dependencies between the two operations. Opportunistically
add a comment to call out that enabling off-by-default XSAVE-managed
features must be done before KVM_GET_SUPPORTED_CPUID is cached.
Signed-off-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Disallow using kvm_get_supported_cpuid() and thus caching KVM's supported
CPUID info before enabling XSAVE-managed features that are off-by-default
and must be enabled by ARCH_REQ_XCOMP_GUEST_PERM. Caching the supported
CPUID before all XSAVE features are enabled can result in false negatives
due to testing features that were cached before they were enabled.
Signed-off-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Move __vm_xsave_require_permission() below the CPUID helpers so that a
future change can reference the cached result of KVM_GET_SUPPORTED_CPUID
while keeping the definition of the variable close to its intended user,
kvm_get_supported_cpuid().
No functional change intended.
Signed-off-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Move the kvm_cpu_has() check on X86_FEATURE_XFD out of the helper to
enable off-by-default XSAVE-managed features and into the one test that
currenty requires XFD (XFeature Disable) support. kvm_cpu_has() uses
kvm_get_supported_cpuid() and thus caches KVM_GET_SUPPORTED_CPUID, and so
using kvm_cpu_has() before ARCH_REQ_XCOMP_GUEST_PERM effectively results
in the test caching stale values, e.g. subsequent checks on AMX_TILE will
get false negatives.
Although off-by-default features are nonsensical without XFD, checking
for XFD virtualization prior to enabling such features isn't strictly
required.
Signed-off-by: Lei Wang <[email protected]>
Fixes: 7fbb653e01fd ("KVM: selftests: Check KVM's supported CPUID, not host CPUID, for XFD")
Link: https://lore.kernel.org/r/[email protected]
[sean: add Fixes, reword changelog]
Signed-off-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Restore the assert (on x86-64) that <10% of pages are still idle when NOT
running as a nested VM in the access tracking test. The original assert
was converted to a "warning" to avoid false failures when running the
test in a VM, but the non-nested case does not suffer from the same
"infinite TLB size" issue.
Using the HYPERVISOR flag isn't infallible as VMMs aren't strictly
required to enumerate the "feature" in CPUID, but practically speaking
anyone that is running KVM selftests in VMs is going to be using a VMM
and hypervisor that sets the HYPERVISOR flag.
Cc: David Matlack <[email protected]>
Reviewed-by: Emanuele Giuseppe Esposito <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Warn if the number of idle pages is greater than or equal to 10% of the
total number of pages, not if the percentage of idle pages is less than
10%. The original code asserted that less than 10% of pages were still
idle, but the check got inverted when the assert was converted to a
warning.
Opportunistically clean up the warning; selftests are 64-bit only, there
is no need to use "%PRIu64" instead of "%lu".
Fixes: 6336a810db5c ("KVM: selftests: replace assertion with warning in access_tracking_perf_test")
Reviewed-by: Emanuele Giuseppe Esposito <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
nfit_test overrode the security_show() sysfs attribute function in nvdimm
dimm_devs in order to allow testing of security unlock. With the
introduction of CXL security commands, the trick to override
security_show() becomes significantly more complicated. By introdcing a
security flag CONFIG_NVDIMM_SECURITY_TEST, libnvdimm can just toggle the
check via a compile option. In addition the original override can can be
removed from tools/testing/nvdimm/.
The flag will also be used to bypass cpu_cache_invalidate_memregion() when
set in a different commit. This allows testing on QEMU with nfit_test or
cxl_test since cpu_cache_has_invalidate_memregion() checks whether
X86_FEATURE_HYPERVISOR cpu feature flag is set on x86.
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/166983618758.2734609.18031639517065867138.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
The mock cxl mem devs needs a way to go into "locked" status to simulate
when the platform is rebooted. Add a sysfs mechanism so the device security
state is set to "locked" and the frozen state bits are cleared.
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/166983617602.2734609.7042497620931694717.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
Add support to emulate a CXL mem device support the "passphrase secure
erase" operation.
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/166983615879.2734609.5177049043677443736.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
Add support to emulate a CXL mem device support the "Unlock" operation.
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/166983614730.2734609.2280484207184754073.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
Add support to emulate a CXL mem device support the "Freeze Security State"
operation.
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/166983613604.2734609.1960672960407811362.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
Add support to emulate a CXL mem device support the "Disable Passphrase"
operation. The operation supports disabling of either a user or a master
passphrase. The emulation will provide support for both user and master
passphrase.
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/166983612447.2734609.2767804273351656413.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
Add support to emulate a CXL mem device supporting the "Set Passphrase"
operation. The operation supports setting of either a user or a master
passphrase.
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Davidlohr Bueso <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/166983611314.2734609.12996309794483934484.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
Add the emulation support for handling "Get Security State" opcode for a
CXL memory device for the cxl_test. The function will copy back device
security state bitmask to the output payload.
The security state data is added as platform_data for the mock mem device.
Reviewed-by: Davidlohr Bueso <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/166983610177.2734609.4953959949148428755.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
Now that we can skip unsupported configurations add some more test cases
using that, cover 8kHz, 44.1kHz and 96kHz plus 8kHz mono and 48kHz 6
channel.
44.1kHz is a different clock base to the existing 48kHz tests and may
therefore show problems with the clock configuration if only 8kHz based
rates are really available (or help diagnose if bad clocking is due to
only 44.1kHz based rates being supported). 8kHz mono and 48Hz 6 channel
are real world formats and should show if clocking does not account for
channel count properly.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Rather than just numbering the tests try to provide semi descriptive names
for what the tests are trying to cover. This also has the advantage of
meaning we can add more tests without having to keep the list of tests
ordered by existing number which should make it easier to understand what
we're testing and why.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The values in the one example configuration file we currently have are the
default values for the two tests we have so there's no need to actually set
them. Comment them out as examples, with a rename for the tests so that we
can update the tests in the code more easily.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
If constraint selection gives us a number of channels other than the one
that we asked for that isn't a failure, that is the device implementing
constraints and advertising that it can't support whatever we asked
for. Report such cases as a test skip rather than failure so we don't have
false positives.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
If constraint selection gives us a sample rate other than the one that we
asked for that isn't a failure, that is the device implementing sample
rate constraints and advertising that it can't support whatever we asked
for. Report such cases as a test skip rather than failure so we don't have
false positives.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
In order to help make the list of tests a bit easier to maintain refactor
things so we pass the tests around as a struct with the parameters in,
enabling us to add new tests by adding to a table with comments saying
what each of the number are. We could also use named initializers if we get
more parameters.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
When everything is starting up we are likely to have a lot of child
processes producing output at once. This means that we can reduce
overhead a bit by allowing epoll_wait() to return more than one
descriptor at once, it cuts down on the number of system calls we need
to do which on virtual platforms where the syscall overhead is a bit
more noticable and we're likely to have a lot more children active can
make a small but noticable difference.
On physical platforms the relatively small number of processes being run
and vastly improved speeds push the effects of this change into the
noise.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Now we hold execution of the stress test programs until all children are
started there is no need to drain output while that is happening.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
At present fp-stress has a bit of a thundering herd problem since the
children it spawns start running immediately, meaning that they can start
starving the parent process of CPU before it has even started all the
children. This is much more severe on virtual platforms since they tend to
support far more SVE and SME vector lengths, be slower in general and for
some have issues with performance when simulating multiple CPUs.
We can mitigate this problem by having all the child processes block before
starting the test program, meaning that we at least have all the child
processes started before we start heavily using CPU. We still have the same
load issues while waiting for the actual stress test programs to start up
and produce output but they're at least all ready to go before that kicks
in, resulting in substantial reductions in overall runtime on some of the
severely affected systems. One test was showing about 20% improvement.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
The test prog dumps a single AF_UNIX socket's UID with and without
unshare(CLONE_NEWUSER) and checks if it matches the result of getuid().
Without the preceding patch, the test prog is killed by a NULL deref
in sk_diag_dump_uid().
# ./diag_uid
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN diag_uid.uid.1 ...
BUG: kernel NULL pointer dereference, address: 0000000000000270
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 105212067 P4D 105212067 PUD 1051fe067 PMD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
RIP: 0010:sk_diag_fill (./include/net/sock.h:920 net/unix/diag.c:119 net/unix/diag.c:170)
...
# 1: Test terminated unexpectedly by signal 9
# FAIL diag_uid.uid.1
not ok 1 diag_uid.uid.1
# RUN diag_uid.uid_unshare.1 ...
# 1: Test terminated by timeout
# FAIL diag_uid.uid_unshare.1
not ok 2 diag_uid.uid_unshare.1
# FAILED: 0 / 2 tests passed.
# Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
With the patch, the test succeeds.
# ./diag_uid
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN diag_uid.uid.1 ...
# OK diag_uid.uid.1
ok 1 diag_uid.uid.1
# RUN diag_uid.uid_unshare.1 ...
# OK diag_uid.uid_unshare.1
ok 2 diag_uid.uid_unshare.1
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add nvdimm_security_ops support for CXL memory device with the introduction
of the ->get_flags() callback function. This is part of the "Persistent
Memory Data-at-rest Security" command set for CXL memory device support.
The ->get_flags() function provides the security state of the persistent
memory device defined by the CXL 3.0 spec section 8.2.9.8.6.1.
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/166983609611.2734609.13231854299523325319.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
Verify the KVM allows userspace to set all supported bits in the
IA32_FEATURE_CONTROL MSR irrespective of the current guest CPUID, and
that all unsupported bits are rejected.
Throw the testcase into vmx_msrs_test even though it's not technically a
VMX MSR; it's close enough, and the most frequently feature controlled by
the MSR is VMX.
Signed-off-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Cover the essential functionality of the iommufd with a directed test from
userspace. This aims to achieve reasonable functional coverage using the
in-kernel self test framework.
A second test does a failure injection sweep of the success paths to study
error unwind behaviors.
This allows achieving high coverage of the corner cases in pages.c.
The selftest requires CONFIG_IOMMUFD_TEST to be enabled, and several huge
pages which may require:
echo 4 > /proc/sys/vm/nr_hugepages
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Nicolin Chen <[email protected]>
Tested-by: Matthew Rosato <[email protected]> # s390
Tested-by: Yi Liu <[email protected]>
Tested-by: Eric Auger <[email protected]> # aarch64
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Currently, the ingress redirect is not covered in "txmsg test apply".
Signed-off-by: Pengcheng Yang <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Jakub Sitnicki <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This test was overlooked with a hard-coded mntpoint path in test when
we're removing the hugetlb mntpoint in commit 0796c7b8be84. Fix it up so
the test can keep running.
Link: https://lkml.kernel.org/r/Y3aojfUC2nSwbCzB@x1n
Fixes: 0796c7b8be84 ("selftests/vm: drop mnt point for hugetlb in run_vmtests.sh")
Signed-off-by: Peter Xu <[email protected]>
Reported-by: Joel Savitz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Let's test whether R/O long-term pinning is reliable for non-anonymous
memory: when R/O long-term pinning a page, the expectation is that we
break COW early before pinning, such that actual write access via the
page tables won't break COW later and end up replacing the R/O-pinned
page in the page table.
Consequently, R/O long-term pinning in private mappings would only target
exclusive anonymous pages.
For now, all tests fail:
# [RUN] R/O longterm GUP pin ... with shared zeropage
not ok 151 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd
not ok 152 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with tmpfile
not ok 153 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with huge zeropage
not ok 154 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (2048 kB)
not ok 155 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (1048576 kB)
not ok 156 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with shared zeropage
not ok 157 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd
not ok 158 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with tmpfile
not ok 159 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with huge zeropage
not ok 160 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (2048 kB)
not ok 161 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (1048576 kB)
not ok 162 Longterm R/O pin is reliable
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Let's add basic tests for COW with non-anonymous pages in private
mappings: write access should properly trigger COW and result in the
private changes not being visible through other page mappings.
Especially, add tests for:
* Zeropage
* Huge zeropage
* Ordinary pagecache pages via memfd and tmpfile()
* Hugetlb pages via memfd
Fortunately, all tests pass.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "mm/gup: remove FOLL_FORCE usage from drivers (reliable R/O
long-term pinning)".
For now, we did not support reliable R/O long-term pinning in COW
mappings. That means, if we would trigger R/O long-term pinning in
MAP_PRIVATE mapping, we could end up pinning the (R/O-mapped) shared
zeropage or a pagecache page.
The next write access would trigger a write fault and replace the pinned
page by an exclusive anonymous page in the process page table; whatever
the process would write to that private page copy would not be visible by
the owner of the previous page pin: for example, RDMA could read stale
data. The end result is essentially an unexpected and hard-to-debug
memory corruption.
Some drivers tried working around that limitation by using
"FOLL_FORCE|FOLL_WRITE|FOLL_LONGTERM" for R/O long-term pinning for now.
FOLL_WRITE would trigger a write fault, if required, and break COW before
pinning the page. FOLL_FORCE is required because the VMA might lack write
permissions, and drivers wanted to make that working as well, just like
one would expect (no write access, but still triggering a write access to
break COW).
However, that is not a practical solution, because
(1) Drivers that don't stick to that undocumented and debatable pattern
would still run into that issue. For example, VFIO only uses
FOLL_LONGTERM for R/O long-term pinning.
(2) Using FOLL_WRITE just to work around a COW mapping + page pinning
limitation is unintuitive. FOLL_WRITE would, for example, mark the
page softdirty or trigger uffd-wp, even though, there actually isn't
going to be any write access.
(3) The purpose of FOLL_FORCE is debug access, not access without lack of
VMA permissions by arbitrarty drivers.
So instead, make R/O long-term pinning work as expected, by breaking COW
in a COW mapping early, such that we can remove any FOLL_FORCE usage from
drivers and make FOLL_FORCE ptrace-specific (renaming it to FOLL_PTRACE).
More details in patch #8.
This patch (of 19):
Originally, the plan was to have a separate tests for testing COW of
non-anonymous (e.g., shared zeropage) pages.
Turns out, that we'd need a lot of similar functionality and that there
isn't a really good reason to separate it. So let's prepare for non-anon
tests by renaming to "cow".
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Alex Williamson <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Andy Walls <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Bernard Metzler <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christian Benvenuti <[email protected]>
Cc: Christian Gmeiner <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Airlie <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Dennis Dalessandro <[email protected]>
Cc: "Eric W . Biederman" <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Hans Verkuil <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Inki Dae <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: James Morris <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Johannes Berg <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kentaro Takeda <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Leon Romanovsky <[email protected]>
Cc: Leon Romanovsky <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nelson Escobar <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Oded Gabbay <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Paul Moore <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Russell King <[email protected]>
Cc: Serge Hallyn <[email protected]>
Cc: Seung-Woo Kim <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tomasz Figa <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When testing overflow and overread, there is no need to keep unnecessary
compilation warnings, we should simply ignore them.
The motivation for this patch is to eliminate the compilation warning,
maybe one day we will compile the kernel with "-Werror -Wall", at which
point this compilation warning will turn into a compilation error, we
should fix this error in advance.
How to reproduce the problem (with gcc-11.3.1):
$ make -C tools/testing/selftests/
...
warning: `write' reading 4294967295 bytes from a region of size 1
[-Wstringop-overread]
warning: `read' writing 4294967295 bytes into a region of size 25
overflows the destination [-Wstringop-overflow=]
"-Wno-stringop-overread" is supported at least in gcc-11.1.0.
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=d14c547abd484d3540b692bb8048c4a6efe92c8b
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Rong Tao <[email protected]>
Reviewed-by: SeongJae Park <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Let's extend the test to cover the possible mprotect() optimization when
removing write-protection. mprotect() must not allow write-access to a
COW-shared page by accident.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Dave Chinner <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
page_owner_sort was introduced since commit 48c96a368579 ("mm/page_owner:
keep track of page owners"), and we should ignore it.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Rong Tao <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
There was a bug[1] that triggered by writing non-context DAMON debugfs
file names to the 'rm_contexts' DAMON debugfs file. Add a selftest for
the bug to avoid it happen again.
[1] https://lore.kernel.org/damon/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Commit 8ebe0a5eaaeb ("mm,madvise,hugetlb: fix unexpected data loss with
MADV_DONTNEED on hugetlbfs") changed how the passed length was interpreted
for hugetlb mappings. It was changed from align up to align down. The
hugetlb-madvise test explicitly tests this behavior. Change test to
expect new behavior.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/oe-lkp/[email protected]
Signed-off-by: Mike Kravetz <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Rik van Riel <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add a simple test case for ensuring tried_regions directory existence.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
rapl domain
This CPU power monitor shows the power consumption
as exposed by the powercap subsystem, cmp with:
Documentation/power/powercap/powercap.rst
cpupower monitor -m RAPL
| RAPL
CPU| pack | core | unco
0|6853926|967832|442381
8|6853926|967832|442381
1|6853926|967832|442381
9|6853926|967832|442381
Unfortunately RAPL domains cannot be directly mapped to the corresponding
CPU socket/package, core it belongs to.
Not sure this is possible at all with the current data exposed from the
kernel.
Still it can be worthful information for developers trying to optimize
power consumption of workloads or their system in general.
Signed-off-by: Thomas Renninger <[email protected]>
CC: Zhang Rui <[email protected]>
CC: Shuah Khan <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|