aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2024-02-13selftests/resctrl: Split measure_cache_vals()Ilpo Järvinen3-27/+41
measure_cache_vals() does a different thing depending on the test case that called it: - For CAT, it measures LLC misses through perf. - For CMT, it measures LLC occupancy through resctrl. Split these two functionalities into own functions the CAT and CMT tests can call directly. Replace passing the struct resctrl_val_param parameter with the filename because it's more generic and all those functions need out of resctrl_val. Co-developed-by: Fenghua Yu <[email protected]> Signed-off-by: Fenghua Yu <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-02-13selftests/resctrl: Exclude shareable bits from schemata in CAT testIlpo Järvinen3-4/+99
CAT test doesn't take shareable bits into account, i.e., the test might be sharing cache with some devices (e.g., graphics). Introduce get_mask_no_shareable() and use it to provision an environment for CAT test where the allocated LLC is isolated better. Excluding shareable_bits may create hole(s) into the cbm_mask, thus add a new helper count_contiguous_bits() to find the longest contiguous set of CBM bits. create_bit_mask() is needed by an upcoming CAT test rewrite so make it available in resctrl.h right away. Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-02-13selftests/resctrl: Create cache_portion_size() helperIlpo Järvinen3-9/+33
CAT and CMT tests calculate size of the cache portion for the n-bits cache allocation on their own. Add cache_portion_size() helper that calculates size of the cache portion for the given number of bits and use it to replace the existing span calculations. This also prepares for the new CAT test that will need to determine the size of the cache portion also during results processing. Rename also 'cache_size' local variables to 'cache_total_size' to prevent misinterpretations. Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-02-13selftests/resctrl: Mark get_cache_size() cache_type constIlpo Järvinen2-2/+2
get_cache_size() does not modify cache_type so it could be const. Mark cache_type const so that const char * can be passed to it. This prevents warnings once many of the test parameters are marked const. Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-02-13selftests/resctrl: Refactor get_cbm_mask() and rename to get_full_cbm()Ilpo Järvinen4-24/+41
Callers of get_cbm_mask() are required to pass a string into which the capacity bitmask (CBM) is read. Neither CAT nor CMT tests need the bitmask as string but just convert it into an unsigned long value. Another limitation is that the bit mask reader can only read .../cbm_mask files. Generalize the bit mask reading function into get_bit_mask() such that it can be used to handle other files besides the .../cbm_mask and handles the unsigned long conversion within get_bit_mask() using fscanf(). Change get_cbm_mask() to use get_bit_mask() and rename it to get_full_cbm() to better indicate what the function does. Return error from get_full_cbm() if the bitmask is zero for some reason because it makes the code more robust as the selftests naturally assume the bitmask has some bits. Also mark cache_type const while at it and remove useless comments that are related to processing of CBM bits. Co-developed-by: Fenghua Yu <[email protected]> Signed-off-by: Fenghua Yu <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-02-13selftests/resctrl: Refactor fill_buf functionsIlpo Järvinen2-43/+18
There are unnecessary nested calls in fill_buf.c: - run_fill_buf() calls fill_cache() - alloc_buffer() calls malloc_and_init_memory() Simplify the code flow and remove those unnecessary call levels by moving the called code inside the calling function and remove the duplicated error print. Resolve the difference in run_fill_buf() and fill_cache() parameter name into 'buf_size' which is more descriptive than 'span'. Also, while moving the allocation related code, rename 'p' into 'buf' to be consistent in naming the variables. Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-02-13selftests/resctrl: Split fill_buf to allow tests finer-grained controlIlpo Järvinen1-6/+15
MBM, MBA and CMT test cases call run_fill_buf() that in turn calls fill_cache() to alloc and loop indefinitely around the buffer. This binds buffer allocation and running the benchmark into a single bundle so that a selftest cannot allocate a buffer once and reuse it. CAT test doesn't want to loop around the buffer continuously and after rewrite it needs the ability to allocate the buffer separately. Split buffer allocation out of fill_cache() into alloc_buffer(). This change is part of preparation for the new CAT test that allocates a buffer and does multiple passes over the same buffer (but not in an infinite loop). Co-developed-by: Fenghua Yu <[email protected]> Signed-off-by: Fenghua Yu <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-02-13selftests/resctrl: Change function comments to say < 0 on errorIlpo Järvinen2-6/+6
A number function comments state the function return non-zero on failure but in reality they can only return 0 on success and < 0 on error. Update the comments to say < 0 on error to match the behavior. While at it, improve cat_val() comment to state that 0 means the test was run (either pass or fail). Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-02-13selftests/resctrl: Don't use ctrlc_handler() outside signal handlingIlpo Järvinen1-1/+0
perf_event_open_llc_miss() calls ctrlc_handler() to cleanup if perf_event_open() returns an error. Those cleanups, however, are not the responsibility of perf_event_open_llc_miss() and it thus interferes unnecessarily with the usual cleanup pattern. Worse yet, ctrlc_handler() calls exit() in the end preventing the ordinary cleanup done in the calling function from executing. ctrlc_handler() should only be used as a signal handler, not during normal error handling. Remove call to ctrlc_handler() from perf_event_open_llc_miss(). As unmounting resctrlfs and test cleanup are already handled properly by error rollbacks in the calling functions, no other changes are necessary. Suggested-by: Reinette Chatre <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-02-13selftests/resctrl: Return -1 instead of errno on errorIlpo Järvinen7-14/+14
A number of functions in the resctrl selftests return errno. It is problematic because errno is positive which is often counterintuitive. Also, every site returning errno prints the error message already with ksft_perror() so there is not much added value in returning the precise error code. Simply convert all places returning errno to return -1 that is typical userspace error code in case of failures. While at it, improve resctrl_val() comment to state that 0 means the test was run (either pass or fail). Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-02-13selftests/resctrl: Convert perror() to ksft_perror() or ksft_print_msg()Ilpo Järvinen9-70/+77
The resctrl selftest code contains a number of perror() calls. Some of them come with hash character and some don't. The kselftest framework provides ksft_perror() that is compatible with test output formatting so it should be used instead of adding custom hash signs. Some perror() calls are too far away from anything that sets error. For those call sites, ksft_print_msg() must be used instead. Convert perror() to ksft_perror() or ksft_print_msg(). Other related changes: - Remove hash signs - Remove trailing stops & newlines from ksft_perror() - Add terminating newlines for converted ksft_print_msg() - Use consistent capitalization - Small fixes/tweaks to typos & grammar of the messages - Extract error printing out of PARENT_EXIT() to be able to differentiate Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-02-13libbpf: Add support to GCC in CORE macro definitionsCupertino Miranda1-7/+38
Due to internal differences between LLVM and GCC the current implementation for the CO-RE macros does not fit GCC parser, as it will optimize those expressions even before those would be accessible by the BPF backend. As examples, the following would be optimized out with the original definitions: - As enums are converted to their integer representation during parsing, the IR would not know how to distinguish an integer constant from an actual enum value. - Types need to be kept as temporary variables, as the existing type casts of the 0 address (as expanded for LLVM), are optimized away by the GCC C parser, never really reaching GCCs IR. Although, the macros appear to add extra complexity, the expanded code is removed from the compilation flow very early in the compilation process, not really affecting the quality of the generated assembly. Signed-off-by: Cupertino Miranda <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-13bpf: Abstract loop unrolling pragmas in BPF selftestsJose E. Marchesi19-42/+102
[Changes from V1: - Avoid conflict by rebasing with latest master.] Some BPF tests use loop unrolling compiler pragmas that are clang specific and not supported by GCC. These pragmas, along with their GCC equivalences are: #pragma clang loop unroll_count(N) #pragma GCC unroll N #pragma clang loop unroll(full) #pragma GCC unroll 65534 #pragma clang loop unroll(disable) #pragma GCC unroll 1 #pragma unroll [aka #pragma clang loop unroll(enable)] There is no GCC equivalence to this pragma. It enables unrolling on loops that the compiler would not ordinarily unroll even with -O2|-funroll-loops, but it is not equivalent to full unrolling either. This patch adds a new header progs/bpf_compiler.h that defines the following macros, which correspond to each pair of compiler-specific pragmas above: __pragma_loop_unroll_count(N) __pragma_loop_unroll_full __pragma_loop_no_unroll __pragma_loop_unroll The selftests using loop unrolling pragmas are then changed to include the header and use these macros in place of the explicit pragmas. Tested in bpf-next master. No regressions. Signed-off-by: Jose E. Marchesi <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-13selftests/bpf: Ensure fentry prog cannot attach to bpf_spin_{lock,unlcok}()Yonghong Song2-0/+57
Add two tests to ensure fentry programs cannot attach to bpf_spin_{lock,unlock}() helpers. The tracing_failure.c files can be used in the future for other tracing failure cases. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-13selftests: net: more pmtu.sh fixesPaolo Abeni1-2/+2
The netdev CI is reporting failures for the pmtu test: [ 115.929264] br0: port 2(vxlan_a) entered forwarding state # 2024/02/08 17:33:22 socat[7871] E bind(7, {AF=10 [0000:0000:0000:0000:0000:0000:0000:0000]:50000}, 28): Address already in use # 2024/02/08 17:33:22 socat[7877] E write(7, 0x5598fb6ff000, 8192): Connection refused # TEST: IPv6, bridged vxlan4: PMTU exceptions [FAIL] # File size 0 mismatches exepcted value in locally bridged vxlan test The root cause is apparently a socket created by a previous iteration of the relevant loop still lasting in LAST_ACK state. Note that even the file size check is racy, the receiver process dumping the file could still be running in background Allow the listener to bound on the same local port via SO_REUSEADDR and collect file output file size only after the listener completion. Fixes: 136a1b434bbb ("selftests: net: test vxlan pmtu exceptions with tcp") Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/4f51c11a1ce7ca7a4dabd926cffff63dadac9ba1.1707731086.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-13selftests: net: more strict check in net_helperPaolo Abeni1-4/+7
The helper waiting for a listener port can match any socket whose hexadecimal representation of source or destination addresses matches that of the given port. Additionally, any socket state is accepted. All the above can let the helper return successfully before the relevant listener is actually ready, with unexpected results. So far I could not find any related failure in the netdev CI, but the next patch is going to make the critical event more easily reproducible. Address the issue matching the port hex only vs the relevant socket field and additionally checking the socket state for TCP sockets. Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection") Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/192b3dbc443d953be32991d1b0ca432bd4c65008.1707731086.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-13selftests: net: cope with slow env in so_txtime.sh testPaolo Abeni1-4/+25
The mentioned test is failing in slow environments: # SO_TXTIME ipv4 clock monotonic # ./so_txtime: recv: timeout: Resource temporarily unavailable not ok 1 selftests: net: so_txtime.sh # exit=1 Tuning the tolerance in the test binary is error-prone and doomed to failures is slow-enough environment. Just resort to suppress any error in such cases. Note to suppress them we need first to refactor a bit the code moving it to explicit error handling. Fixes: af5136f95045 ("selftests/net: SO_TXTIME with ETF and FQ") Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/2142d9ed4b5c5aa07dd1b455779625d91b175373.1707730902.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-13selftests: net: cope with slow env in gro.sh testPaolo Abeni1-0/+5
The gro self-tests sends the packets to be aggregated with multiple write operations. When running is slow environment, it's hard to guarantee that the GRO engine will wait for the last packet in an intended train. The above causes almost deterministic failures in our CI for the 'large' test-case. Address the issue explicitly ignoring failures for such case in slow environments (KSFT_MACHINE_SLOW==true). Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/97d3ba83f5a2bfeb36f6bc0fb76724eb3dafb608.1707729403.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-12selftests: net: ip_local_port_range: define IPPROTO_MPTCPMaxim Galaganov1-0/+4
Older glibc's netinet/in.h may leave IPPROTO_MPTCP undefined when building ip_local_port_range.c, that leads to "error: use of undeclared identifier 'IPPROTO_MPTCP'". Define IPPROTO_MPTCP in such cases, just like in other MPTCP selftests. Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE") Reported-by: Linux Kernel Functional Testing <[email protected]> Closes: https://lore.kernel.org/netdev/CA+G9fYvGO5q4o_Td_kyQgYieXWKw6ktMa-Q0sBu6S-0y3w2aEQ@mail.gmail.com/ Signed-off-by: Maxim Galaganov <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-12selftests/net: Adding test cases of replacing routes and route advertisements.Kui-Feng Lee1-22/+129
Add tests of changing permanent routes to temporary routes and the reversed case to make sure GC working correctly in these cases. Add tests for the temporary routes from RA. The existing device will be deleted between tests to remove all routes associated with it, so that the earlier tests don't mess up the later ones. Reviewed-by: Hangbin Liu <[email protected]> Reviewed-by: David Ahern <[email protected]> Tested-by: Hangbin Liu <[email protected]> Signed-off-by: Kui-Feng Lee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-12selftests: net: ignore timing errors in txtimestamp if KSFT_MACHINE_SLOWPaolo Abeni1-1/+2
This test is time sensitive. It may fail on virtual machines and for debug builds. Similar to commit c41dfb0dfbec ("selftests/net: ignore timing errors in so_txtime if KSFT_MACHINE_SLOW"), optionally suppress failure for timing errors (only). Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-12tools/rtla: Exit with EXIT_SUCCESS when help is invokedJohn Kacur4-4/+20
Fix rtla so that the following commands exit with 0 when help is invoked rtla osnoise top -h rtla osnoise hist -h rtla timerlat top -h rtla timerlat hist -h Link: https://lore.kernel.org/linux-trace-devel/[email protected] Cc: [email protected] Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode") Signed-off-by: John Kacur <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rtla: Replace setting prio with nice for SCHED_OTHERlimingming32-3/+5
Since the sched_priority for SCHED_OTHER is always 0, it makes no sence to set it. Setting nice for SCHED_OTHER seems more meaningful. Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: b1696371d865 ("rtla: Helper functions for rtla") Signed-off-by: limingming3 <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rv: Fix curr_reactor uninitialized variableDaniel Bristot de Oliveira1-1/+1
clang is reporting: $ make HOSTCC=clang CC=clang LLVM_IAS=1 clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -I include -c -o src/in_kernel.o src/in_kernel.c [...] src/in_kernel.c:227:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] 227 | if (!end) | ^~~~ src/in_kernel.c:242:9: note: uninitialized use occurs here 242 | return curr_reactor; | ^~~~~~~~~~~~ src/in_kernel.c:227:2: note: remove the 'if' if its condition is always false 227 | if (!end) | ^~~~~~~~~ 228 | goto out_free; | ~~~~~~~~~~~~~ src/in_kernel.c:221:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] 221 | if (!start) | ^~~~~~ src/in_kernel.c:242:9: note: uninitialized use occurs here 242 | return curr_reactor; | ^~~~~~~~~~~~ src/in_kernel.c:221:2: note: remove the 'if' if its condition is always false 221 | if (!start) | ^~~~~~~~~~~ 222 | goto out_free; | ~~~~~~~~~~~~~ src/in_kernel.c:215:20: note: initialize the variable 'curr_reactor' to silence this warning 215 | char *curr_reactor; | ^ | = NULL 2 warnings generated. Which is correct. Setting curr_reactor to NULL avoids the problem. Link: https://lkml.kernel.org/r/3a35551149e5ee0cb0950035afcb8082c3b5d05b.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Donald Zickus <[email protected]> Fixes: 6d60f89691fc ("tools/rv: Add in-kernel monitor interface") Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rv: Fix Makefile compiler options for clangDaniel Bristot de Oliveira1-1/+6
The following errors are showing up when compiling rv with clang: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized $(pkg-config --cflags libtracefs) -I include -c -o src/utils.o src/utils.c clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument] warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option] 1 warning generated. clang -o rv -ggdb src/in_kernel.o src/rv.o src/trace.o src/utils.o $(pkg-config --libs libtracefs) src/in_kernel.o: file not recognized: file format not recognized clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:110: rv] Error 1 Solve these issues by: - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang - informing the linker about -flto=auto Link: https://lkml.kernel.org/r/ed94a8ddc2ca8c8ef663cfb7ae9dd196c4a66b33.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Fixes: 4bc4b131d44c ("rv: Add rv tool") Suggested-by: Donald Zickus <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rtla: Remove unused sched_getattr() functionDaniel Bristot de Oliveira1-6/+0
Clang is reporting: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:241:19: warning: unused function 'sched_getattr' [-Wunused-function] 241 | static inline int sched_getattr(pid_t pid, struct sched_attr *attr, | ^~~~~~~~~~~~~ 1 warning generated. Which is correct, so remove the unused function. Link: https://lkml.kernel.org/r/eaed7ba122c4ae88ce71277c824ef41cbf789385.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Donald Zickus <[email protected]> Fixes: b1696371d865 ("rtla: Helper functions for rtla") Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rtla: Fix clang warning about mount_point var sizeDaniel Bristot de Oliveira1-1/+1
clang is reporting this warning: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:548:66: warning: 'fscanf' may overflow; destination buffer in argument 3 has size 1024, but the corresponding specifier may require size 1025 [-Wfortify-source] 548 | while (fscanf(fp, "%*s %" STR(MAX_PATH) "s %99s %*s %*d %*d\n", mount_point, type) == 2) { | ^ Increase mount_point variable size to MAX_PATH+1 to avoid the overflow. Link: https://lkml.kernel.org/r/1b46712e93a2f4153909514a36016959dcc4021c.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Donald Zickus <[email protected]> Fixes: a957cbc02531 ("rtla: Add -C cgroup support") Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rtla: Fix uninitialized bucket/data->bucket_size warningDaniel Bristot de Oliveira2-4/+2
When compiling rtla with clang, I am getting the following warnings: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [..] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/osnoise_hist.o src/osnoise_hist.c src/osnoise_hist.c:138:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] 138 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~ src/osnoise_hist.c:149:6: note: uninitialized use occurs here 149 | if (bucket < entries) | ^~~~~~ src/osnoise_hist.c:138:2: note: remove the 'if' if its condition is always true 138 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~~~~~~ 139 | bucket = duration / data->bucket_size; src/osnoise_hist.c:132:12: note: initialize the variable 'bucket' to silence this warning 132 | int bucket; | ^ | = 0 1 warning generated. [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/timerlat_hist.o src/timerlat_hist.c src/timerlat_hist.c:181:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] 181 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~ src/timerlat_hist.c:204:6: note: uninitialized use occurs here 204 | if (bucket < entries) | ^~~~~~ src/timerlat_hist.c:181:2: note: remove the 'if' if its condition is always true 181 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~~~~~~ 182 | bucket = latency / data->bucket_size; src/timerlat_hist.c:175:12: note: initialize the variable 'bucket' to silence this warning 175 | int bucket; | ^ | = 0 1 warning generated. This is a legit warning, but data->bucket_size is always > 0 (see timerlat_hist_parse_args()), so the if is not necessary. Remove the unneeded if (data->bucket_size) to avoid the warning. Link: https://lkml.kernel.org/r/6e1b1665cd99042ae705b3e0fc410858c4c42346.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Cc: Donald Zickus <[email protected]> Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode") Fixes: 829a6c0b5698 ("rtla/osnoise: Add the hist mode") Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-12tools/rtla: Fix Makefile compiler options for clangDaniel Bristot de Oliveira1-1/+6
The following errors are showing up when compiling rtla with clang: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument] warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option] 1 warning generated. clang -o rtla -ggdb src/osnoise.o src/osnoise_hist.o src/osnoise_top.o src/rtla.o src/timerlat_aa.o src/timerlat.o src/timerlat_hist.o src/timerlat_top.o src/timerlat_u.o src/trace.o src/utils.o $(pkg-config --libs libtracefs) src/osnoise.o: file not recognized: file format not recognized clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:110: rtla] Error 1 Solve these issues by: - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang - informing the linker about -flto=auto Link: https://lore.kernel.org/linux-trace-kernel/567ac1b94effc228ce9a0225b9df7232a9b35b55.1707217097.git.bristot@kernel.org Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Bill Wendling <[email protected]> Cc: Justin Stitt <[email protected]> Fixes: 1a7b22ab15eb ("tools/rtla: Build with EXTRA_{C,LD}FLAGS") Suggested-by: Donald Zickus <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
2024-02-11bpf: Allow compiler to inline most of bpf_local_storage_lookup()Marco Elver3-49/+0
In various performance profiles of kernels with BPF programs attached, bpf_local_storage_lookup() appears as a significant portion of CPU cycles spent. To enable the compiler generate more optimal code, turn bpf_local_storage_lookup() into a static inline function, where only the cache insertion code path is outlined Notably, outlining cache insertion helps avoid bloating callers by duplicating setting up calls to raw_spin_{lock,unlock}_irqsave() (on architectures which do not inline spin_lock/unlock, such as x86), which would cause the compiler produce worse code by deciding to outline otherwise inlinable functions. The call overhead is neutral, because we make 2 calls either way: either calling raw_spin_lock_irqsave() and raw_spin_unlock_irqsave(); or call __bpf_local_storage_insert_cache(), which calls raw_spin_lock_irqsave(), followed by a tail-call to raw_spin_unlock_irqsave() where the compiler can perform TCO and (in optimized uninstrumented builds) turns it into a plain jump. The call to __bpf_local_storage_insert_cache() can be elided entirely if cacheit_lockit is a false constant expression. Based on results from './benchs/run_bench_local_storage.sh' (21 trials, reboot between each trial; x86 defconfig + BPF, clang 16) this produces improvements in throughput and latency in the majority of cases, with an average (geomean) improvement of 8%: +---- Hashmap Control -------------------- | | + num keys: 10 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 14.789 M ops/s | 14.745 M ops/s ( ~ ) | +- hits latency | 67.679 ns/op | 67.879 ns/op ( ~ ) | +- important_hits throughput | 14.789 M ops/s | 14.745 M ops/s ( ~ ) | | + num keys: 1000 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 12.233 M ops/s | 12.170 M ops/s ( ~ ) | +- hits latency | 81.754 ns/op | 82.185 ns/op ( ~ ) | +- important_hits throughput | 12.233 M ops/s | 12.170 M ops/s ( ~ ) | | + num keys: 10000 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 7.220 M ops/s | 7.204 M ops/s ( ~ ) | +- hits latency | 138.522 ns/op | 138.842 ns/op ( ~ ) | +- important_hits throughput | 7.220 M ops/s | 7.204 M ops/s ( ~ ) | | + num keys: 100000 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 5.061 M ops/s | 5.165 M ops/s (+2.1%) | +- hits latency | 198.483 ns/op | 194.270 ns/op (-2.1%) | +- important_hits throughput | 5.061 M ops/s | 5.165 M ops/s (+2.1%) | | + num keys: 4194304 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 2.864 M ops/s | 2.882 M ops/s ( ~ ) | +- hits latency | 365.220 ns/op | 361.418 ns/op (-1.0%) | +- important_hits throughput | 2.864 M ops/s | 2.882 M ops/s ( ~ ) | +---- Local Storage ---------------------- | | + num_maps: 1 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 33.005 M ops/s | 39.068 M ops/s (+18.4%) | +- hits latency | 30.300 ns/op | 25.598 ns/op (-15.5%) | +- important_hits throughput | 33.005 M ops/s | 39.068 M ops/s (+18.4%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 37.151 M ops/s | 44.926 M ops/s (+20.9%) | +- hits latency | 26.919 ns/op | 22.259 ns/op (-17.3%) | +- important_hits throughput | 37.151 M ops/s | 44.926 M ops/s (+20.9%) | | + num_maps: 10 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 32.288 M ops/s | 38.099 M ops/s (+18.0%) | +- hits latency | 30.972 ns/op | 26.248 ns/op (-15.3%) | +- important_hits throughput | 3.229 M ops/s | 3.810 M ops/s (+18.0%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 34.473 M ops/s | 41.145 M ops/s (+19.4%) | +- hits latency | 29.010 ns/op | 24.307 ns/op (-16.2%) | +- important_hits throughput | 12.312 M ops/s | 14.695 M ops/s (+19.4%) | | + num_maps: 16 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 32.524 M ops/s | 38.341 M ops/s (+17.9%) | +- hits latency | 30.748 ns/op | 26.083 ns/op (-15.2%) | +- important_hits throughput | 2.033 M ops/s | 2.396 M ops/s (+17.9%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 34.575 M ops/s | 41.338 M ops/s (+19.6%) | +- hits latency | 28.925 ns/op | 24.193 ns/op (-16.4%) | +- important_hits throughput | 11.001 M ops/s | 13.153 M ops/s (+19.6%) | | + num_maps: 17 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 28.861 M ops/s | 32.756 M ops/s (+13.5%) | +- hits latency | 34.649 ns/op | 30.530 ns/op (-11.9%) | +- important_hits throughput | 1.700 M ops/s | 1.929 M ops/s (+13.5%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 31.529 M ops/s | 36.110 M ops/s (+14.5%) | +- hits latency | 31.719 ns/op | 27.697 ns/op (-12.7%) | +- important_hits throughput | 9.598 M ops/s | 10.993 M ops/s (+14.5%) | | + num_maps: 24 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 18.602 M ops/s | 19.937 M ops/s (+7.2%) | +- hits latency | 53.767 ns/op | 50.166 ns/op (-6.7%) | +- important_hits throughput | 0.776 M ops/s | 0.831 M ops/s (+7.2%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 21.718 M ops/s | 23.332 M ops/s (+7.4%) | +- hits latency | 46.047 ns/op | 42.865 ns/op (-6.9%) | +- important_hits throughput | 6.110 M ops/s | 6.564 M ops/s (+7.4%) | | + num_maps: 32 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 14.118 M ops/s | 14.626 M ops/s (+3.6%) | +- hits latency | 70.856 ns/op | 68.381 ns/op (-3.5%) | +- important_hits throughput | 0.442 M ops/s | 0.458 M ops/s (+3.6%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 17.111 M ops/s | 17.906 M ops/s (+4.6%) | +- hits latency | 58.451 ns/op | 55.865 ns/op (-4.4%) | +- important_hits throughput | 4.776 M ops/s | 4.998 M ops/s (+4.6%) | | + num_maps: 100 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 5.281 M ops/s | 5.528 M ops/s (+4.7%) | +- hits latency | 192.398 ns/op | 183.059 ns/op (-4.9%) | +- important_hits throughput | 0.053 M ops/s | 0.055 M ops/s (+4.9%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 6.265 M ops/s | 6.498 M ops/s (+3.7%) | +- hits latency | 161.436 ns/op | 152.877 ns/op (-5.3%) | +- important_hits throughput | 1.636 M ops/s | 1.697 M ops/s (+3.7%) | | + num_maps: 1000 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 0.355 M ops/s | 0.354 M ops/s ( ~ ) | +- hits latency | 2826.538 ns/op | 2827.139 ns/op ( ~ ) | +- important_hits throughput | 0.000 M ops/s | 0.000 M ops/s ( ~ ) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 0.404 M ops/s | 0.403 M ops/s ( ~ ) | +- hits latency | 2481.190 ns/op | 2487.555 ns/op ( ~ ) | +- important_hits throughput | 0.102 M ops/s | 0.101 M ops/s ( ~ ) The on_lookup test in {cgrp,task}_ls_recursion.c is removed because the bpf_local_storage_lookup is no longer traceable and adding tracepoint will make the compiler generate worse code: https://lore.kernel.org/bpf/[email protected]/ Signed-off-by: Marco Elver <[email protected]> Cc: Martin KaFai Lau <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2024-02-10Merge tag 'mm-hotfixes-stable-2024-02-10-11-16' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7 issues or aren't considered to be needed in earlier kernel versions" * tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits) nilfs2: fix potential bug in end_buffer_async_write mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup nilfs2: fix hang in nilfs_lookup_dirty_data_buffers() MAINTAINERS: Leo Yan has moved mm/zswap: don't return LRU_SKIP if we have dropped lru lock fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super mailmap: switch email address for John Moon mm: zswap: fix objcg use-after-free in entry destruction mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range() arch/arm/mm: fix major fault accounting when retrying under per-VMA lock selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page mm: memcg: optimize parent iteration in memcg_rstat_updated() nilfs2: fix data corruption in dsync block recovery for small block sizes mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get() exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock) fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand() getrusage: use sig->stats_lock rather than lock_task_sighand() getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand() ...
2024-02-10selftests: tls: use exact comparison in recv_partialJakub Kicinski1-4/+4
This exact case was fail for async crypto and we weren't catching it. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-09work around gcc bugs with 'asm goto' with outputsLinus Torvalds2-3/+3
We've had issues with gcc and 'asm goto' before, and we created a 'asm_volatile_goto()' macro for that in the past: see commits 3f0116c3238a ("compiler/gcc4: Add quirk for 'asm goto' miscompilation bug") and a9f180345f53 ("compiler/gcc4: Make quirk for asm_volatile_goto() unconditional"). Then, much later, we ended up removing the workaround in commit 43c249ea0b1e ("compiler-gcc.h: remove ancient workaround for gcc PR 58670") because we no longer supported building the kernel with the affected gcc versions, but we left the macro uses around. Now, Sean Christopherson reports a new version of a very similar problem, which is fixed by re-applying that ancient workaround. But the problem in question is limited to only the 'asm goto with outputs' cases, so instead of re-introducing the old workaround as-is, let's rename and limit the workaround to just that much less common case. It looks like there are at least two separate issues that all hit in this area: (a) some versions of gcc don't mark the asm goto as 'volatile' when it has outputs: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420 which is easy to work around by just adding the 'volatile' by hand. (b) Internal compiler errors: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422 which are worked around by adding the extra empty 'asm' as a barrier, as in the original workaround. but the problem Sean sees may be a third thing since it involves bad code generation (not an ICE) even with the manually added 'volatile'. but the same old workaround works for this case, even if this feels a bit like voodoo programming and may only be hiding the issue. Reported-and-tested-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Cc: Nick Desaulniers <[email protected]> Cc: Uros Bizjak <[email protected]> Cc: Jakub Jelinek <[email protected]> Cc: Andrew Pinski <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2024-02-09selftests: udpgso: Pull up network setup into shell scriptJakub Sitnicki2-136/+47
udpgso regression test configures routing and device MTU directly through uAPI (Netlink, ioctl) to do its job. While there is nothing wrong with it, it takes more effort than doing it from shell. Looking forward, we would like to extend the udpgso regression tests to cover the EIO corner case [1], once it gets addressed. That will require a dummy device and device feature manipulation to set it up. Which means more Netlink code. So, in preparation, pull out network configuration into the shell script part of the test, so it is easily extendable in the future. Also, because it now easy to setup routing, add a second local IPv6 address. Because the second address is not managed by the kernel, we can "replace" the corresponding local route with a reduced-MTU one. This unblocks the disabled "ipv6 connected" test case. Add a similar setup for IPv4 for symmetry. [1] https://lore.kernel.org/netdev/[email protected]/ Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: Jakub Sitnicki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: openvswitch: Add validation for the recursion testAaron Conole2-15/+69
Add a test case into the netlink checks that will show the number of nested action recursions won't exceed 16. Going to 17 on a small clone call isn't enough to exhaust the stack on (most) systems, so it should be safe to run even on systems that don't have the fix applied. Signed-off-by: Aaron Conole <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: net: include forwarding libPaolo Abeni1-0/+2
The altnames test uses the forwarding/lib.sh and that dependency currently causes failures when running the test after install: make -C tools/testing/selftests/ TARGETS=net install ./tools/testing/selftests/kselftest_install/run_kselftest.sh \ -t net:altnames.sh # ... # ./altnames.sh: line 8: ./forwarding/lib.sh: No such file or directory # RTNETLINK answers: Operation not permitted # ./altnames.sh: line 73: tests_run: command not found # ./altnames.sh: line 65: pre_cleanup: command not found Address the issue leveraging the TEST_INCLUDES infrastructure provided by commit 2a0683be5b4c ("selftests: Introduce Makefile variable to list shared bash scripts") Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/f7b1e9d468224cbc136d304362315499fe39848f.1707298927.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: tc-testing: add mirred to block tdc testsVictor Nogueira1-0/+396
Add 8 new mirred tdc tests that target mirred to block: - Add mirred mirror to egress block action - Add mirred mirror to ingress block action - Add mirred redirect to egress block action - Add mirred redirect to ingress block action - Try to add mirred action with both dev and block - Try to add mirred action without specifying neither dev nor block - Replace mirred redirect to dev action with redirect to block - Replace mirred redirect to block action with mirror to dev Signed-off-by: Victor Nogueira <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: forwarding: Fix bridge locked port test flakinessIdo Schimmel1-2/+2
The redirection test case fails in the netdev CI on debug kernels because an FDB entry is learned despite the presence of a tc filter that redirects incoming traffic [1]. I am unable to reproduce the failure locally, but I can see how it can happen given that learning is first enabled and only then the ingress tc filter is configured. On debug kernels the time window between these two operations is longer compared to regular kernels, allowing random packets to be transmitted and trigger learning. Fix by reversing the order and configure the ingress tc filter before enabling learning. [1] [...] # TEST: Locked port MAB redirect [FAIL] # Locked entry created for redirected traffic Fixes: 38c43a1ce758 ("selftests: forwarding: Add test case for traffic redirection from a locked port") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: forwarding: Suppress grep warningsIdo Schimmel1-3/+3
Suppress the following grep warnings: [...] INFO: # Port group entries configuration tests - (*, G) TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ] TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ] grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / TEST: IPv4 (*, G) port group entries configuration tests [ OK ] grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / TEST: IPv6 (*, G) port group entries configuration tests [ OK ] [...] They do not fail the test, but do clutter the output. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: forwarding: Fix bridge MDB test flakinessIdo Schimmel1-2/+6
After enabling a multicast querier on the bridge (like the test is doing), the bridge will wait for the Max Response Delay before starting to forward according to its MDB in order to let Membership Reports enough time to be received and processed. Currently, the test is waiting for exactly the default Max Response Delay (10 seconds) which is racy and leads to failures [1]. Fix by reducing the Max Response Delay to 1 second. [1] [...] # TEST: IPv4 host entries forwarding tests [FAIL] # Packet locally received after flood Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: forwarding: Fix layer 2 miss test flakinessIdo Schimmel1-2/+6
After enabling a multicast querier on the bridge (like the test is doing), the bridge will wait for the Max Response Delay before starting to forward according to its MDB in order to let Membership Reports enough time to be received and processed. Currently, the test is waiting for exactly the default Max Response Delay (10 seconds) which is racy and leads to failures [1]. Fix by reducing the Max Response Delay to 1 second. [1] [...] # TEST: L2 miss - Multicast (IPv4) [FAIL] # Unregistered multicast filter was hit after adding MDB entry Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: net: Fix bridge backup port test flakinessIdo Schimmel1-0/+23
The test toggles the carrier of a bridge port in order to test the bridge backup port feature. Due to the linkwatch delayed work the carrier change is not always reflected fast enough to the bridge driver and packets are not forwarded as the test expects, resulting in failures [1]. Fix by busy waiting on the bridge port state until it changes to the desired state following the carrier change. [1] # Backup port # ----------- [...] # TEST: swp1 carrier off [ OK ] # TEST: No forwarding out of swp1 [FAIL] [ 641.995910] br0: port 1(swp1) entered disabled state # TEST: No forwarding out of vx0 [ OK ] Fixes: b408453053fb ("selftests: net: Add bridge backup port and backup nexthop ID test") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Acked-by: Paolo Abeni <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09selftests: forwarding: Add missing multicast routing config entriesIdo Schimmel1-0/+7
The two tests that make use of multicast routig (router.sh and router_multicast.sh) are currently failing in the netdev CI because the kernel is missing multicast routing support. Fix by adding the required config entries. Fixes: 6d4efada3b82 ("selftests: forwarding: Add multicast routing test") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08selftests: net: add more missing kernel configPaolo Abeni1-1/+5
The reuseport_addr_any.sh is currently skipping DCCP tests and pmtu.sh is skipping all the FOU/GUE related cases: add the missing options. Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/38d3ca7f909736c1aef56e6244d67c82a9bba6ff.1707326987.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski40-406/+781
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/stmicro/stmmac/common.h 38cc3c6dcc09 ("net: stmmac: protect updates of 64-bit statistics counters") fd5a6a71313e ("net: stmmac: est: Per Tx-queue error count for HLBF") c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio") drivers/net/wireless/microchip/wilc1000/netdev.c c9013880284d ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000") 328efda22af8 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08Merge tag 'net-6.8-rc4' of ↵Linus Torvalds8-23/+85
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and netfilter. Current release - regressions: - nic: intel: fix old compiler regressions - netfilter: ipset: missing gc cancellations fixed Current release - new code bugs: - netfilter: ctnetlink: fix filtering for zone 0 Previous releases - regressions: - core: fix from address in memcpy_to_iter_csum() - netfilter: nfnetlink_queue: un-break NF_REPEAT - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC. - devlink: avoid potential loop in devlink_rel_nested_in_notify_work() - iwlwifi: - mvm: fix a battery life regression - fix double-free bug - mac80211: fix waiting for beacons logic - nic: nfp: flower: prevent re-adding mac index for bonded port Previous releases - always broken: - rxrpc: fix generation of serial numbers to skip zero - tipc: check the bearer type before calling tipc_udp_nl_bearer_add() - tunnels: fix out of bounds access when building IPv6 PMTU error - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER missed - nic: atlantic: fix DMA mapping for PTP hwts ring Misc: - selftests: more fixes to deal with very slow hosts" * tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits) netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 s390/qeth: Fix potential loss of L3-IP@ in case of network issues netfilter: ipset: Missing gc cancellations fixed octeontx2-af: Initialize maps. net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits net: intel: fix old compiler regressions MAINTAINERS: Maintainer change for rds selftests: cmsg_ipv6: repeat the exact packet ...
2024-02-08Merge tag 'nf-24-02-08' of ↵Paolo Abeni1-1/+42
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Narrow down target/match revision to u8 in nft_compat. 2) Bail out with unused flags in nft_compat. 3) Restrict layer 4 protocol to u16 in nft_compat. 4) Remove static in pipapo get command that slipped through when reducing set memory footprint. 5) Follow up incremental fix for the ipset performance regression, this includes the missing gc cancellation, from Jozsef Kadlecsik. 6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0 as no filtering, from Felix Huettner. 7) Reject direction for NFT_CT_ID. 8) Use timestamp to check for set element expiration while transaction is handled to prevent garbage collection from removing set elements that were just added by this transaction. Packet path and netlink dump/get path still use current time to check for expiration. 9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal. 10) map_index needs to be percpu and per-set, not just percpu. At this time its possible for a pipapo set to fill the all-zero part with ones and take the 'might have bits set' as 'start-from-zero' area. From Florian Westphal. This includes three patches: - Change scratchpad area to a structure that provides space for a per-set-and-cpu toggle and uses it of the percpu one. - Add a new free helper to prepare for the next patch. - Remove the scratch_aligned pointer and makes AVX2 implementation use the exact same memory addresses for read/store of the matching state. netfilter pull request 24-02-08 * tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 netfilter: ipset: Missing gc cancellations fixed netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-08netfilter: ctnetlink: fix filtering for zone 0Felix Huettner1-1/+42
previously filtering for the default zone would actually skip the zone filter and flush all zones. Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone") Reported-by: Ilya Maximets <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Felix Huettner <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-07selftests: core: include linux/close_range.h for CLOSE_RANGE_* macrosMuhammad Usama Anjum1-0/+1
Correct header file is needed for getting CLOSE_RANGE_* macros. Previously it was tested with newer glibc which didn't show the need to include the header which was a mistake. Link: https://lkml.kernel.org/r/[email protected] Fixes: ec54424923cf ("selftests: core: remove duplicate defines") Reported-by: Aishwarya TCV <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Muhammad Usama Anjum <[email protected]> Cc: Shuah Khan <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-02-07selftests: bonding: use slowwait instead of hard code sleepHangbin Liu3-10/+24
Use slowwait instead of hard code sleep for bonding tests. In function setup_prepare(), the client_create() will be called after server_create(). So I think there is no need to sleep in server_create() and remove it. For lab_lib.sh, remove bonding module may affect other running bonding tests. And some test env may buildin bond which can't be removed. The bonding link should be removed by lag_reset_network() or netns delete. Signed-off-by: Hangbin Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.