| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For manual debug, allow printing the netlink level messages
to stderr.
Reviewed-by: Donald Hunter <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Make the size of the buffer we use for recv() configurable.
The details of the buffer sizing in netlink are somewhat
arcane, we could spend a lot of time polishing this API.
Let's just leave some hopefully helpful comments for now.
This is a for-developers-only feature, anyway.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Donald Hunter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We add the new line even if message has no error or extack,
which leads to print(nl_msg) ending with two new lines.
Reviewed-by: Donald Hunter <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Build process uses python to generate the user space code.
Remove __pycache__ on make clean.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Donald Hunter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Donald points out most YNL makefiles are missing distclean
in .PHONY, even tho generated/Makefile does list it.
Suggested-by: Donald Hunter <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Donald Hunter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The make target to remove all generated files used to be called
"hardclean" because it deleted files which were tracked by git.
We no longer track generated user space files, so use the more
common "distclean" name.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Donald Hunter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
selftest harness uses various exit codes to signal test
results. Avoid calling exit() directly, otherwise tests
may get broken by harness refactoring (like the commit
under Fixes). SKIP() will instruct the harness that the
test shouldn't run, it used to not be the case, but that
has been fixed. So just return, no need to exit.
Note that for hmm-tests this actually changes the result
from pass to skip. Which seems fair, the test is skipped,
after all.
Reported-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Fixes: a724707976b0 ("selftests: kselftest_harness: use KSFT_* exit codes")
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Tested-by: Mark Brown <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Adjust the XDP feature flags for the bond device when no bond slave
devices are attached. After 9b0ed890ac2a ("bonding: do not report
NETDEV_XDP_ACT_XSK_ZEROCOPY"), the empty bond device must report 0
as flags instead of NETDEV_XDP_ACT_MASK.
# ./vmtest.sh -- ./test_progs -t xdp_bond
[...]
[ 3.983311] bond1 (unregistering): (slave veth1_1): Releasing backup interface
[ 3.995434] bond1 (unregistering): Released all slaves
[ 4.022311] bond2: (slave veth2_1): Releasing backup interface
#507/1 xdp_bonding/xdp_bonding_attach:OK
#507/2 xdp_bonding/xdp_bonding_nested:OK
#507/3 xdp_bonding/xdp_bonding_features:OK
#507/4 xdp_bonding/xdp_bonding_roundrobin:OK
#507/5 xdp_bonding/xdp_bonding_activebackup:OK
#507/6 xdp_bonding/xdp_bonding_xor_layer2:OK
#507/7 xdp_bonding/xdp_bonding_xor_layer23:OK
#507/8 xdp_bonding/xdp_bonding_xor_layer34:OK
#507/9 xdp_bonding/xdp_bonding_redirect_multi:OK
#507 xdp_bonding:OK
Summary: 1/9 PASSED, 0 SKIPPED, 0 FAILED
[ 4.185255] bond2 (unregistering): Released all slaves
[...]
Fixes: 9b0ed890ac2a ("bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPY")
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Toke Høiland-Jørgensen <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The test case was minimized from mailing list discussion [0].
It is equivalent to the following C program:
struct iter_limit_bug_ctx { __u64 a; __u64 b; __u64 c; };
static __naked void iter_limit_bug_cb(void)
{
switch (bpf_get_prandom_u32()) {
case 1: ctx->a = 42; break;
case 2: ctx->b = 42; break;
default: ctx->c = 42; break;
}
}
int iter_limit_bug(struct __sk_buff *skb)
{
struct iter_limit_bug_ctx ctx = { 7, 7, 7 };
bpf_loop(2, iter_limit_bug_cb, &ctx, 0);
if (ctx.a == 42 && ctx.b == 42 && ctx.c == 7)
asm volatile("r1 /= 0;":::"r1");
return 0;
}
The main idea is that each loop iteration changes one of the state
variables in a non-deterministic manner. Hence it is premature to
prune the states that have two iterations left comparing them to
states with one iteration left.
E.g. {{7,7,7}, callback_depth=0} can reach state {42,42,7},
while {{7,7,7}, callback_depth=1} can't.
[0] https://lore.kernel.org/bpf/[email protected]/
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
It seems some shells linked to /bin/sh don't have consistent behavior
with error codes on execution failures. Explicitly use /bin/bash so that
"not found" errors are correctly generated. Repeating the comment from
the test:
/*
* Execute as a long pathname relative to "/". If this is a script,
* the interpreter will launch but fail to open the script because its
* name ("/dev/fd/5/xxx....") is bigger than PATH_MAX.
*
* The failure code is usually 127 (POSIX: "If a command is not found,
* the exit status shall be 127."), but some systems give 126 (POSIX:
* "If the command name is found, but it is not an executable utility,
* the exit status shall be 126."), so allow either.
*/
Reported-by: Muhammad Usama Anjum <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Kees Cook <[email protected]>
---
Cc: Eric Biederman <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: [email protected]
Cc: [email protected]
|
|
With the removal of the ARCH_NR_GPIOS, the number of available GPIOs
is effectively unlimited, causing the gpio-mockup module load failure
test that overflowed the number of GPIOs to unexpectedly succeed, and
so fail.
The test is no longer relevant so remove it.
Promote the "no lines defined" test so there is still one load
failure test in the basic set.
Fixes: 7b61212f2a07 ("gpiolib: Get rid of ARCH_NR_GPIOS")
Reported-by: Pengfei Xu <[email protected]>
Reported-by: Yi Lai <[email protected]>
Closes: https://lore.kernel.org/linux-gpio/[email protected]/
Signed-off-by: Kent Gibson <[email protected]>
Acked-by: Christophe Leroy <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
This test is userspace code, but uses some kernel headers via symlinks,
and mocks other headers, in order to test load_unaligned_zeropad().
Currently the test fails to build with:
In file included from load_unaligned_zeropad.c:26:
word-at-a-time.h:7:10: fatal error: linux/bitops.h: No such file or directory
7 | #include <linux/bitops.h>
This is due to the recent changes to the kernel headers.
Fix it by symlinking the new wordpart.h, and creating an empty stub for
bitops.h which is all that's needed.
Reported-by: Sachin Sant <[email protected]>
Tested-by: Sachin Sant <[email protected]>
Fixes: 66a5c40f60f5 ("kernel.h: removed REPEAT_BYTE from kernel.h")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
These tests generate various IPv6 flows, encapsulate them in GRE packets
and check that the encapsulated packets are distributed between the
available nexthops according to the configured weights.
Unlike the corresponding IPv4 tests, these tests sometimes fail in the
netdev CI because of large discrepancies between the expected and
measured ratios [1]. This can be explained by the fact that the IPv4
tests generate about 3,600 different flows whereas the IPv6 tests only
generate about 784 different flows (potentially by mistake).
Fix by aligning the IPv6 tests to the IPv4 ones and increase the number
of generated flows.
[1]
[...]
# TEST: ping [ OK ]
# INFO: Running IPv6 over GRE over IPv4 multipath tests
# TEST: ECMP [FAIL]
# Too large discrepancy between expected and measured ratios
# INFO: Expected ratio 1.00 Measured ratio 1.18
[...]
Signed-off-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
These tests sometimes fail on the netdev CI because the expected number
of packets is larger than expected [1].
Make the tests more robust by specifically matching on VXLAN
encapsulated packets and allowing up to five stray packets instead of
just two.
[1]
[...]
# TEST: VXLAN: ECN encap: 0x00->0x00 [FAIL]
# v1: Expected to capture 10 packets, got 13.
# TEST: VXLAN: ECN encap: 0x01->0x01 [ OK ]
# TEST: VXLAN: ECN encap: 0x02->0x02 [ OK ]
# TEST: VXLAN: ECN encap: 0x03->0x02 [ OK ]
[...]
Signed-off-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The ageing time used by the test is too short for debug kernels and
results in entries being aged out prematurely [1].
Fix by increasing the ageing time.
[1]
# ./vxlan_bridge_1q.sh
[...]
INFO: learning vlan 10
TEST: VXLAN: flood before learning [ OK ]
TEST: VXLAN: show learned FDB entry [ OK ]
TEST: VXLAN: learned FDB entry [FAIL]
swp4: Expected to capture 0 packets, got 10.
RTNETLINK answers: No such file or directory
TEST: VXLAN: deletion of learned FDB entry [ OK ]
TEST: VXLAN: Ageing of learned FDB entry [FAIL]
swp4: Expected to capture 0 packets, got 10.
TEST: VXLAN: learning toggling on bridge port [ OK ]
[...]
Signed-off-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The test configures a policer with a rate of 80Mbps and expects to
measure a rate close to it. This is a too high rate for debug kernels,
causing the test to fail [1].
Fix by reducing the rate to 10Mbps.
[1]
# ./tc_police.sh
TEST: police on rx [FAIL]
Expected rate 76.2Mbps, got 29.6Mbps, which is -61% off. Required accuracy is +-10%.
TEST: police on tx [FAIL]
Expected rate 76.2Mbps, got 30.4Mbps, which is -60% off. Required accuracy is +-10%.
Signed-off-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The various multipath tests use mausezahn to generate different flows
and check how they are distributed between the available nexthops. The
tool is currently invoked with an hard coded transmission delay of 1 ms.
This is unnecessary when the tests are run with veth pairs and
needlessly prolongs the tests.
Parametrize this delay and default it to 0 us. It can be overridden
using the forwarding.config file. On my system, this reduces the run
time of router_multipath.sh by 93%.
Signed-off-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The multipath tests currently test both the L3 and L4 multipath hash
policies for IPv6, but only the L4 policy for IPv4. The reason is mostly
historic: When the initial multipath test was added
(router_multipath.sh) the IPv6 L4 policy did not exist and was later
added to the test. The other multipath tests copied this pattern
although there is little value in testing both policies.
Align the IPv4 and IPv6 tests and only test the L4 policy. On my system,
this reduces the run time of router_multipath.sh by 89% because of the
repeated ping6 invocations to randomize the flow label.
Signed-off-by: Ido Schimmel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
introduce vhost_net_test for both vhost_net tx and rx basing
on virtio_test to test vhost_net changing in the kernel.
Steps for vhost_net tx testing:
1. Prepare a out buf.
2. Kick the vhost_net to do tx processing.
3. Do the receiving in the tun side.
4. verify the data received by tun is correct.
Steps for vhost_net rx testing:
1. Prepare a in buf.
2. Do the sending in the tun side.
3. Kick the vhost_net to do rx processing.
4. verify the data received by vhost_net is correct.
Signed-off-by: Yunsheng Lin <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The PARTIAL_NODE slab_state has gone with SLAB removed, so just
remove it.
Signed-off-by: Chengming Zhou <[email protected]>
Signed-off-by: Vlastimil Babka <[email protected]>
|
|
Add the dependsOn test check for all the mirred blockcast tests.
It will prevent the issue reported by LKFT which happens when an older
iproute2 is used to run the current tdc.
Tests are skipped if the dependsOn check fails.
Reported-by: Linux Kernel Functional Testing <[email protected]>
Signed-off-by: Pedro Tammela <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Changes :
- "excercise" is corrected to "exercise" in drivers/net/mlxsw/spectrum-2/tc_flower.sh
- "mutliple" is corrected to "multiple" in drivers/net/netdevsim/ethtool-fec.sh
Signed-off-by: Prabhav Kumar Vaish <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Create and load a struct_ops map with a large number of struct_ops
programs to generate trampolines taking a size over multiple pages. The
map includes 40 programs. Their trampolines takes 6.6k+, more than 1.5
pages, on x86.
Signed-off-by: Kui-Feng Lee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Add new basic kselftest that checks if the available rust sample modules
can be added and removed correctly.
Signed-off-by: Laura Nao <[email protected]>
Reviewed-by: Sergio Gonzalez Collado <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
In current ping-pong design, xdp_hw_metadata will wait until the packet
transmission completely done, then only start to receive the next packet.
The current sleep interval is 10ms, which is unnecessary large. Typically,
a NIC does not need such a long time to transmit a packet. Furthermore,
during this 10ms sleep time, the app is unable to receive incoming packets.
Therefore, this commit reduce sleep interval to 10us, so that
xdp_hw_metadata is able to support periodic packets with shorter interval.
10us * 500 = 5ms should be enough for packet transmission and status
retrieval.
Signed-off-by: Song Yoong Siang <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Settle on three "flavors" of uprobe/uretprobe, installed on different
kinds of instruction: nop, push, and ret. All three are testing
different internal code paths emulating or single-stepping instructions,
so are interesting to compare and benchmark separately.
To ensure `push rbp` instruction we ensure that uprobe_target_push() is
not a leaf function by calling (global __weak) noop function and
returning something afterwards (if we don't do that, compiler will just
do a tail call optimization).
Also, we need to make sure that compiler isn't skipping frame pointer
generation, so let's add `-fno-omit-frame-pointers` to Makefile.
Just to give an idea of where we currently stand in terms of relative
performance of different uprobe/uretprobe cases vs a cheap syscall
(getpgid()) baseline, here are results from my local machine:
$ benchs/run_bench_uprobes.sh
base : 1.561 ± 0.020M/s
uprobe-nop : 0.947 ± 0.007M/s
uprobe-push : 0.951 ± 0.004M/s
uprobe-ret : 0.443 ± 0.007M/s
uretprobe-nop : 0.471 ± 0.013M/s
uretprobe-push : 0.483 ± 0.004M/s
uretprobe-ret : 0.306 ± 0.007M/s
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
In the function btf__load_vmlinux_btf, the debug message incorrectly
refers to 'path' instead of 'sysfs_btf_path'.
Signed-off-by: Chen Shen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch adds a new helper userspace_pm_get_addr() in mptcp_join.sh.
In it, parse the token value from the output of 'pm_nl_ctl events', then
pass it to pm_nl_ctl get_addr command. Use this helper in userspace pm
dump tests.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The command get_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl get $id
This patch adds token argument for it to support userspace PM:
pm_nl_ctl get $id token $token
If 'token $token' is passed to get_addr(), copy it into the kernel netlink.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds a new helper userspace_pm_dump() to dump addresses
for the userspace PM. Use this helper to check whether an ID 0 subflow
is listed in the output of dump command after creating an ID 0 subflow
in "userspace pm create id 0 subflow" test. Dump userspace PM addresses
list in "userspace pm add & remove address" test and in "userspace pm
create destroy subflow" test.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Extract the main part of check() in pm_netlink.sh into a new helper
named mptcp_lib_check_output in mptcp_lib.sh.
This helper will be used for userspace dump addresses tests.
Co-developed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The command dump_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl dump
This patch adds token argument for it to support userspace PM:
pm_nl_ctl dump token $token
If 'token $token' is passed to dump_addr(), copy it into the kernel
netlink.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds the address flag MPTCP_PM_ADDR_FLAG_SUBFLOW in csf() in
pm_nl_ctl.c when subflow is created by a userspace PM.
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When creating a lot of listener sockets, it is enough to wait only for
the last one, like we are doing before in diag.sh for other subtests.
If we do a check for each listener sockets, each time listing all
available sockets, it can take a very long time in very slow
environments, at the point we can reach some timeout.
When using the debug kconfig, the waiting time switches from more than
8 sec to 0.1 sec on my side. In slow/busy environments, and with a poll
timeout set to 30 ms, the waiting time could go up to ~100 sec because
the listener socket would timeout and stop, while the script would still
be checking one by one if all sockets are ready. The result is that
after having waited for everything to be ready, all sockets have been
stopped due to a timeout, and it is too late for the script to check how
many there were.
While at it, also removed ss options we don't need: we only need the
filtering options, to count how many listener sockets have been created.
We don't need to ask ss to display internal TCP information, and the
memory if the output is dropped by the 'wc -l' command anyway.
Fixes: b4b51d36bbaa ("selftests: mptcp: explicitly trigger the listener diag code-path")
Reported-by: Jakub Kicinski <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The test counter 'test_cnt' should not be returned in diag.sh, e.g. what
if only the 4th test fail? Will do 'exit 4' which is 'exit ${KSFT_SKIP}',
the whole test will be marked as skipped instead of 'failed'!
So we should do ret=${KSFT_FAIL} instead.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Cc: [email protected]
Fixes: 42fb6cddec3b ("selftests: mptcp: more stable diag tests")
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix IOMMU table initialisation when doing kdump over SR-IOV
- Fix incorrect RTAS function name for resetting TCE tables
- Fix fpu_signal selftest failures since a recent change
Thanks to Gaurav Batra and Nathan Lynch.
* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix fpu_signal failures
powerpc/rtas: use correct function name for resetting TCE tables
powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
My recent commit e5d00aaac651 ("selftests/powerpc: Check all FPRs in
fpu_preempt") inadvertently broke the fpu_signal test.
It needs to take into account that fpu_preempt now loads 32 FPRs, so
enlarge darray.
Also use the newly added randomise_darray() to properly randomise darray.
Finally the checking done in signal_fpu_sig() needs to skip checking
f30/f31, because they are used as scratch registers in check_all_fprs(),
called by preempt_fpu(), and so could hold other values when the signal
is taken.
Fixes: e5d00aaac651 ("selftests/powerpc: Check all FPRs in fpu_preempt")
Reported-by: Spoorthy <[email protected]>
Depends-on: 2ba107f6795d ("selftests/powerpc: Generate better bit patterns for FPU tests")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
I cleared IFF_NOARP flag from netdevsim dev->flags in order to support
skb forwarding. This breaks the rtnetlink.sh selftest
kci_test_ipsec_offload() test because ipsec does not connect to peers it
cannot transmit to.
Fix the issue by adding a neigh entry manually. ipsec_offload test now
successfully pass.
Signed-off-by: David Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Connect two netdevsim ports in different namespaces together, then send
packets between them using socat.
Signed-off-by: David Wei <[email protected]>
Reviewed-by: Maciek Machnikowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
SCTP does not support IP_LOCAL_PORT_RANGE and we know it,
so use XFAIL instead of SKIP.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently some tests report skip for things they expect to fail
e.g. when given combination of parameters is known to be unsupported.
This is confusing because in an ideal test environment and fully
featured kernel no tests should be skipped.
Selftest summary line already includes xfail and xpass counters,
e.g.:
Totals: pass:725 fail:0 xfail:0 xpass:0 skip:0 error:0
but there's no way to use it from within the harness.
Add a new per-fixture+variant combination list of test cases
we expect to fail.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Switch to printing KTAP line for PASS / FAIL with ksft_test_result_code(),
this gives us the ability to report diagnostic messages.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ksft_test_result_code()
According to the spec we should always print a # if we add
a diagnostic message. Having the caller pass in the new line
as part of diagnostic message makes handling this a bit
counter-intuitive, so append the new line in the helper.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Jakub points out that for parsers it's rather useful to always
have the test name on the result line. Currently if we SKIP
(or soon XFAIL or XPASS), we will print:
ok 17 # SKIP SCTP doesn't support IP_BIND_ADDRESS_NO_PORT
^
no test name
Always print the test name.
KTAP format seems to allow or even call for it, per:
https://docs.kernel.org/dev-tools/ktap.html
Suggested-by: Jakub Sitnicki <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
For generic test harness code it's more useful to deal with exit
codes directly, rather than having to switch on them and call
the right ksft_test_result_*() helper. Add such function to kselftest.h.
Note that "directive" and "diagnostic" are what ktap docs call
those parts of the message.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We always use skip in combination with exit_code being 0
(KSFT_PASS). This are basic KSFT / KTAP semantics.
Store the right KSFT_* code in exit_code directly.
This makes it easier to support tests reporting other
extended KSFT_* codes like XFAIL / XPASS.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Instead of tracking passed = 0/1 rename the field to exit_code
and invert the values so that they match the KSFT_* exit codes.
This will allow us to fold SKIP / XFAIL into the same value.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since we added variant support generating full test case
name takes 4 string arguments. We're about to need it
in another two places. Stop the duplication and print
once into a temporary buffer.
Suggested-by: Jakub Sitnicki <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Now that we no longer need low exit codes to communicate
assertion steps - use normal KSFT exit codes.
Acked-by: Kees Cook <[email protected]>
Tested-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|