aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-12-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-9/+113
Pull kvm fixes from Paolo Bonzini: - Fix for compilation of selftests on non-x86 architectures - Fix for kvm_run->if_flag on SEV-ES - Fix for page table use-after-free if yielding during exit_mm() - Improve behavior when userspace starts a nested guest with invalid state - Fix missed wakeup with assigned devices but no VT-d posted interrupts - Do not tell userspace to save/restore an unsupported PMU MSR * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state KVM: nVMX: Synthesize TRIPLE_FAULT for L2 if emulation is required KVM: VMX: Always clear vmx->fail on emulation_required selftests: KVM: Fix non-x86 compiling KVM: x86: Always set kvm_run->if_flag KVM: x86/mmu: Don't advance iterator after restart due to yielding KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all
2021-12-21selftests/powerpc: Add a test of sigreturning to the kernelMichael Ellerman3-0/+134
We have a general signal fuzzer, sigfuz, which can modify the MSR & NIP before sigreturn. But the chance of it hitting a kernel address and also clearing MSR_PR is fairly slim. So add a specific test of sigreturn to a kernel address, both with and without attempting to clear MSR_PR (which the kernel must block). Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-20selftests/bpf: Correct the INDEX address in vmtest.shPu Lehui1-1/+1
Migration of vmtest to libbpf/ci will change the address of INDEX in vmtest.sh, which will cause vmtest.sh to not work due to the failure of rootfs fetching. Signed-off-by: Pu Lehui <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Lorenzo Fontana <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-20KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest stateSean Christopherson3-0/+107
Add a selftest to attempt to enter L2 with invalid guests state by exiting to userspace via I/O from L2, and then using KVM_SET_SREGS to set invalid guest state (marking TR unusable is arbitrary chosen for its relative simplicity). This is a regression test for a bug introduced by commit c8607e4a086f ("KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry"), which incorrectly set vmx->fail=true when L2 had invalid guest state and ultimately triggered a WARN due to nested_vmx_vmexit() seeing vmx->fail==true while attempting to synthesize a nested VM-Exit. The is also a functional test to verify that KVM sythesizes TRIPLE_FAULT for L2, which is somewhat arbitrary behavior, instead of emulating L2. KVM should never emulate L2 due to invalid guest state, as it's architecturally impossible for L1 to run an L2 guest with invalid state as nested VM-Enter should always fail, i.e. L1 needs to do the emulation. Stuffing state via KVM ioctl() is a non-architctural, out-of-band case, hence the TRIPLE_FAULT being rather arbitrary. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-12-20selftests: KVM: Fix non-x86 compilingAndrew Jones2-9/+6
Attempting to compile on a non-x86 architecture fails with include/kvm_util.h: In function ‘vm_compute_max_gfn’: include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type ‘struct kvm_vm’ return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1; ^~ This is because the declaration of struct kvm_vm is in lib/kvm_util_internal.h as an effort to make it private to the test lib code. We can still provide arch specific functions, though, by making the generic function symbols weak. Do that to fix the compile error. Fixes: c8cc43c1eae2 ("selftests: KVM: avoid failures due to reserved HyperTransport region") Cc: [email protected] Signed-off-by: Andrew Jones <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-12-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-17/+0
Pull kvm fixes from Paolo Bonzini: "Two small fixes, one of which was being worked around in selftests" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Retry page fault if MMU reload is pending and root has no sp KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
2021-12-19KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDsVitaly Kuznetsov1-17/+0
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend on guest visible CPUIDs and (incorrect) KVM logic implementing it is about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden and causes test to fail. Reported-by: kernel test robot <[email protected]> Fixes: feb627e8d6f6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN") Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-12-19selftests: tc-testing: add action offload selftest for action and filterBaowen Zheng2-0/+96
Add selftest cases in action police with skip_hw. Add selftest case to validate flags of filter and action. These tests depend on corresponding iproute2 command support. Signed-off-by: Baowen Zheng <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-18bpf/selftests: Test PTR_TO_RDONLY_MEMHao Luo2-0/+43
This test verifies that a ksym of non-struct can not be directly updated. Signed-off-by: Hao Luo <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-18perf inject: Fix segfault due to perf_data__fd() without openAdrian Hunter1-3/+7
The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae03893623dd1dd ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-18perf inject: Fix segfault due to close without openAdrian Hunter1-1/+2
The fixed commit attempts to close inject.output even if it was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 48 iofclose.c: No such file or directory. (gdb) bt #0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 #1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376 #2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085 #3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313 #4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539 (gdb) Fixes: 02e6246f5364d526 ("perf inject: Close inject.output on exit") Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-18perf expr: Fix missing check for return value of hashmap__new()Miaoqian Lin1-0/+5
The hashmap__new() function may return ERR_PTR(-ENOMEM) when malloc() fails, add IS_ERR() checking for ctx->ids. Signed-off-by: Miaoqian Lin <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] [ s/kfree()/free()/ and add missing linux/err.h include ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-17selftests: mptcp: try to set mptcp ulp mode in different sk statesFlorian Westphal2-66/+51
The kernel will crash without 'mptcp: clear 'kern' flag from fallback sockets' change. Since this doesn't slow down testing in a noticeable way, run this unconditionally. The explicit test did not catch this, because the check was done for tcp socket returned by 'socket(.. IPPROTO_TCP) rather than a tcp socket returned by accept() on a mptcp listen fd. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-17perf arm-spe: Synthesize SPE instruction eventsGerman Gomez1-0/+62
Synthesize instruction events for every ARM SPE record. Arm SPE implements a hardware-based sample period, and perf implements a software-based one. Add a warning message to inform the user of this. Signed-off-by: German Gomez <[email protected]> Tested-by: Leo Yan <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-17bpf, selftests: Fix spelling mistake "tained" -> "tainted"Colin Ian King1-1/+1
There appears to be a spelling mistake in a bpf test message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-17bpftool: Reimplement large insn size limit feature probingAndrii Nakryiko1-3/+23
Reimplement bpf_probe_large_insn_limit() in bpftool, as that libbpf API is scheduled for deprecation in v0.8. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Dave Marchevsky <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-17selftests/bpf: Add libbpf feature-probing API selftestsAndrii Nakryiko2-0/+126
Add selftests for prog/map/prog+helper feature probing APIs. Prog and map selftests are designed in such a way that they will always test all the possible prog/map types, based on running kernel's vmlinux BTF enum definition. This way we'll always be sure that when adding new BPF program types or map types, libbpf will be always updated accordingly to be able to feature-detect them. BPF prog_helper selftest will have to be manually extended with interesting and important prog+helper combinations, it's easy, but can't be completely automated. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Dave Marchevsky <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-17libbpf: Rework feature-probing APIsAndrii Nakryiko3-54/+236
Create three extensible alternatives to inconsistently named feature-probing APIs: - libbpf_probe_bpf_prog_type() instead of bpf_probe_prog_type(); - libbpf_probe_bpf_map_type() instead of bpf_probe_map_type(); - libbpf_probe_bpf_helper() instead of bpf_probe_helper(). Set up return values such that libbpf can report errors (e.g., if some combination of input arguments isn't possible to validate, etc), in addition to whether the feature is supported (return value 1) or not supported (return value 0). Also schedule deprecation of those three APIs. Also schedule deprecation of bpf_probe_large_insn_limit(). Also fix all the existing detection logic for various program and map types that never worked: - BPF_PROG_TYPE_LIRC_MODE2; - BPF_PROG_TYPE_TRACING; - BPF_PROG_TYPE_LSM; - BPF_PROG_TYPE_EXT; - BPF_PROG_TYPE_SYSCALL; - BPF_PROG_TYPE_STRUCT_OPS; - BPF_MAP_TYPE_STRUCT_OPS; - BPF_MAP_TYPE_BLOOM_FILTER. Above prog/map types needed special setups and detection logic to work. Subsequent patch adds selftests that will make sure that all the detection logic keeps working for all current and future program and map types, avoiding otherwise inevitable bit rot. [0] Closes: https://github.com/libbpf/libbpf/issues/312 Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Dave Marchevsky <[email protected]> Cc: Julia Kartseva <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-17selftests/sgx: Fix corrupted cpuid macro invocationJarkko Sakkinen1-3/+2
The SGX selftest fails to build on tip/x86/sgx: main.c: In function ‘get_total_epc_mem’: main.c:296:17: error: implicit declaration of function ‘__cpuid’ [-Werror=implicit-function-declaration] 296 | __cpuid(&eax, &ebx, &ecx, &edx); | ^~~~~~~ Include cpuid.h and use __cpuid_count() macro in order to fix the compilation issue. [ dhansen: tweak commit message ] Fixes: f0ff2447b861 ("selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed") Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Acked-by: Reinette Chatre <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Cc: Shuah Khan <[email protected]>
2021-12-17selftests: gpio: gpio-sim: avoid forking test twiceBartosz Golaszewski1-1/+1
Use '-o' within [] in order to avoid spawning two processes for test. Suggested-by: Andy Shevchenko <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2021-12-17selftests: gpio: gpio-sim: remove bashismsBartosz Golaszewski1-2/+2
'==' is a bashisms and not understood by POSIX shell. Drop it from gpio-sim selftests. Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-12-17selftests: gpio: add test cases for gpio-simBartosz Golaszewski3-1/+398
Add a set of tests for the new gpio-sim module. This is a pure shell test-suite and uses the helper programs available in the gpio selftests directory. These test-cases only test the functionalities exposed by the gpio-sim driver, not those handled by core gpiolib code. Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-12-17selftests: gpio: add a helper for reading GPIO line namesBartosz Golaszewski3-1/+57
Add a simple program that allows to read GPIO line names from the character device. This will be used in gpio-sim selftests. Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-12-17selftests: gpio: provide a helper for reading chip infoBartosz Golaszewski3-1/+59
Add a simple program that allows to retrieve chip properties from the GPIO character device. This will be used in gpio-sim selftests. Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-12-17Merge tag 'lkdtm-v5.17-rc1' of ↵Greg Kroah-Hartman1-1/+15
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next Kees writes: lkdtm updates for v5.17-rc1 - Fix printk() usage during recursion (Ard Biesheuvel) - Fix rodata section to actually have contents (Christophe Leroy) - Add notes about lkdtm_kernel_info usage (Kees Cook) - Avoid stack-entropy selftest when LKDTM is disabled (Misono Tomohiro) * tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftest/lkdtm: Skip stack-entropy test if lkdtm is not available lkdtm: Fix content of section containing lkdtm_rodata_do_nothing() lkdtm: avoid printk() in recursive_loop() lkdtm: Note that lkdtm_kernel_info should be removed in the future
2021-12-16bpf: Right align verifier states in verifier logs.Christy Lee1-77/+92
Make the verifier logs more readable, print the verifier states on the corresponding instruction line. If the previous line was not a bpf instruction, then print the verifier states on its own line. Before: Validating test_pkt_access_subprog3() func#3... 86: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R10=fp0 ; int test_pkt_access_subprog3(int val, struct __sk_buff *skb) 86: (bf) r6 = r2 87: R2=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0) 87: (bc) w7 = w1 88: R1=invP(id=0) R7_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123)); 88: (bf) r1 = r6 89: R1_w=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0) 89: (85) call pc+9 Func#4 is global and valid. Skipping. 90: R0_w=invP(id=0) 90: (bc) w8 = w0 91: R0_w=invP(id=0) R8_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123)); 91: (b7) r1 = 123 92: R1_w=invP123 92: (85) call pc+65 Func#5 is global and valid. Skipping. 93: R0=invP(id=0) After: 86: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R10=fp0 ; int test_pkt_access_subprog3(int val, struct __sk_buff *skb) 86: (bf) r6 = r2 ; R2=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0) 87: (bc) w7 = w1 ; R1=invP(id=0) R7_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123)); 88: (bf) r1 = r6 ; R1_w=ctx(id=0,off=0,imm=0) R6_w=ctx(id=0,off=0,imm=0) 89: (85) call pc+9 Func#4 is global and valid. Skipping. 90: R0_w=invP(id=0) 90: (bc) w8 = w0 ; R0_w=invP(id=0) R8_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ; return get_skb_len(skb) * get_skb_ifindex(val, skb, get_constant(123)); 91: (b7) r1 = 123 ; R1_w=invP123 92: (85) call pc+65 Func#5 is global and valid. Skipping. 93: R0=invP(id=0) Signed-off-by: Christy Lee <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2021-12-16bpf: Only print scratched registers and stack slots to verifier logs.Christy Lee1-15/+15
When printing verifier state for any log level, print full verifier state only on function calls or on errors. Otherwise, only print the registers and stack slots that were accessed. Log size differences: verif_scale_loop6 before: 234566564 verif_scale_loop6 after: 72143943 69% size reduction kfree_skb before: 166406 kfree_skb after: 55386 69% size reduction Before: 156: (61) r0 = *(u32 *)(r1 +0) 157: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8_w=00000000 fp-16_w=00\ 000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000 fp-56_w=00000000 fp-64_w=00000000 fp-72_w=00000000 fp-80_w=00000\ 000 fp-88_w=00000000 fp-96_w=00000000 fp-104_w=00000000 fp-112_w=00000000 fp-120_w=00000000 fp-128_w=00000000 fp-136_w=00000000 fp-144_w=00\ 000000 fp-152_w=00000000 fp-160_w=00000000 fp-168_w=00000000 fp-176_w=00000000 fp-184_w=00000000 fp-192_w=00000000 fp-200_w=00000000 fp-208\ _w=00000000 fp-216_w=00000000 fp-224_w=00000000 fp-232_w=00000000 fp-240_w=00000000 fp-248_w=00000000 fp-256_w=00000000 fp-264_w=00000000 f\ p-272_w=00000000 fp-280_w=00000000 fp-288_w=00000000 fp-296_w=00000000 fp-304_w=00000000 fp-312_w=00000000 fp-320_w=00000000 fp-328_w=00000\ 000 fp-336_w=00000000 fp-344_w=00000000 fp-352_w=00000000 fp-360_w=00000000 fp-368_w=00000000 fp-376_w=00000000 fp-384_w=00000000 fp-392_w=\ 00000000 fp-400_w=00000000 fp-408_w=00000000 fp-416_w=00000000 fp-424_w=00000000 fp-432_w=00000000 fp-440_w=00000000 fp-448_w=00000000 ; return skb->len; 157: (95) exit Func#4 is safe for any args that match its prototype Validating get_constant() func#5... 158: R1=invP(id=0) R10=fp0 ; int get_constant(long val) 158: (bf) r0 = r1 159: R0_w=invP(id=1) R1=invP(id=1) R10=fp0 ; return val - 122; 159: (04) w0 += -122 160: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=invP(id=1) R10=fp0 ; return val - 122; 160: (95) exit Func#5 is safe for any args that match its prototype Validating get_skb_ifindex() func#6... 161: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R3=invP(id=0) R10=fp0 ; int get_skb_ifindex(int val, struct __sk_buff *skb, int var) 161: (bc) w0 = w3 162: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R3=invP(id=0) R10=fp0 After: 156: (61) r0 = *(u32 *)(r1 +0) 157: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1=ctx(id=0,off=0,imm=0) ; return skb->len; 157: (95) exit Func#4 is safe for any args that match its prototype Validating get_constant() func#5... 158: R1=invP(id=0) R10=fp0 ; int get_constant(long val) 158: (bf) r0 = r1 159: R0_w=invP(id=1) R1=invP(id=1) ; return val - 122; 159: (04) w0 += -122 160: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ; return val - 122; 160: (95) exit Func#5 is safe for any args that match its prototype Validating get_skb_ifindex() func#6... 161: R1=invP(id=0) R2=ctx(id=0,off=0,imm=0) R3=invP(id=0) R10=fp0 ; int get_skb_ifindex(int val, struct __sk_buff *skb, int var) 161: (bc) w0 = w3 162: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R3=invP(id=0) Signed-off-by: Christy Lee <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski37-124/+854
No conflicts. Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-16selftest/lkdtm: Skip stack-entropy test if lkdtm is not availableMisono Tomohiro1-1/+15
Exit with return code 4 if lkdtm is not available like other tests in order to properly skip the test. Signed-off-by: Misono Tomohiro <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-16Merge tag 'net-5.16-rc6' of ↵Linus Torvalds14-16/+421
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from mac80211, wifi, bpf. Relatively large batches of fixes from BPF and the WiFi stack, calm in general networking. Current release - regressions: - dpaa2-eth: fix buffer overrun when reporting ethtool statistics Current release - new code bugs: - bpf: fix incorrect state pruning for <8B spill/fill - iavf: - add missing unlocks in iavf_watchdog_task() - do not override the adapter state in the watchdog task (again) - mlxsw: spectrum_router: consolidate MAC profiles when possible Previous releases - regressions: - mac80211 fixes: - rate control, avoid driver crash for retransmitted frames - regression in SSN handling of addba tx - a memory leak where sta_info is not freed - marking TX-during-stop for TX in in_reconfig, prevent stall - cfg80211: acquire wiphy mutex on regulatory work - wifi drivers: fix build regressions and LED config dependency - virtio_net: fix rx_drops stat for small pkts - dsa: mv88e6xxx: unforce speed & duplex in mac_link_down() Previous releases - always broken: - bpf fixes: - kernel address leakage in atomic fetch - kernel address leakage in atomic cmpxchg's r0 aux reg - signed bounds propagation after mov32 - extable fixup offset - extable address check - mac80211: - fix the size used for building probe request - send ADDBA requests using the tid/queue of the aggregation session - agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid deadlocks - validate extended element ID is present - mptcp: - never allow the PM to close a listener subflow (null-defer) - clear 'kern' flag from fallback sockets, prevent crash - fix deadlock in __mptcp_push_pending() - inet_diag: fix kernel-infoleak for UDP sockets - xsk: do not sleep in poll() when need_wakeup set - smc: avoid very long waits in smc_release() - sch_ets: don't remove idle classes from the round-robin list - netdevsim: - zero-initialize memory for bpf map's value, prevent info leak - don't let user space overwrite read only (max) ethtool parms - ixgbe: set X550 MDIO speed before talking to PHY - stmmac: - fix null-deref in flower deletion w/ VLAN prio Rx steering - dwmac-rk: fix oob read in rk_gmac_setup - ice: time stamping fixes - systemport: add global locking for descriptor life cycle" * tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits) bpf, selftests: Fix racing issue in btf_skc_cls_ingress test selftest/bpf: Add a test that reads various addresses. bpf: Fix extable address check. bpf: Fix extable fixup offset. bpf, selftests: Add test case trying to taint map value pointer bpf: Make 32->64 bounds propagation slightly more robust bpf: Fix signed bounds propagation after mov32 sit: do not call ipip6_dev_free() from sit_init_net() net: systemport: Add global locking for descriptor lifecycle net/smc: Prevent smc_release() from long blocking net: Fix double 0x prefix print in SKB dump virtio_net: fix rx_drops stat for small pkts dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED sfc_ef100: potential dereference of null pointer net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup net: usb: lan78xx: add Allied Telesis AT29M2-AF net/packet: rx_owner_map depends on pg_vec netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc dpaa2-eth: fix ethtool statistics ixgbe: set X550 MDIO speed before talking to PHY ...
2021-12-16Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski9-3/+353
Daniel Borkmann says: ==================== pull-request: bpf 2021-12-16 We've added 15 non-merge commits during the last 7 day(s) which contain a total of 12 files changed, 434 insertions(+), 30 deletions(-). The main changes are: 1) Fix incorrect verifier state pruning behavior for <8B register spill/fill, from Paul Chaignon. 2) Fix x86-64 JIT's extable handling for fentry/fexit when return pointer is an ERR_PTR(), from Alexei Starovoitov. 3) Fix 3 different possibilities that BPF verifier missed where unprivileged could leak kernel addresses, from Daniel Borkmann. 4) Fix xsk's poll behavior under need_wakeup flag, from Magnus Karlsson. 5) Fix an oob-write in test_verifier due to a missed MAX_NR_MAPS bump, from Kumar Kartikeya Dwivedi. 6) Fix a race in test_btf_skc_cls_ingress selftest, from Martin KaFai Lau. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, selftests: Fix racing issue in btf_skc_cls_ingress test selftest/bpf: Add a test that reads various addresses. bpf: Fix extable address check. bpf: Fix extable fixup offset. bpf, selftests: Add test case trying to taint map value pointer bpf: Make 32->64 bounds propagation slightly more robust bpf: Fix signed bounds propagation after mov32 bpf, selftests: Update test case for atomic cmpxchg on r0 with pointer bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux reg bpf, selftests: Add test case for atomic fetch on spilled pointer bpf: Fix kernel address leakage in atomic fetch selftests/bpf: Fix OOB write in test_verifier xsk: Do not sleep in poll() when need_wakeup set selftests/bpf: Tests for state pruning with u32 spill/fill bpf: Fix incorrect state pruning for <8B spill/fill ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-16bpf, selftests: Fix racing issue in btf_skc_cls_ingress testMartin KaFai Lau1-2/+14
The libbpf CI reported occasional failure in btf_skc_cls_ingress: test_syncookie:FAIL:Unexpected syncookie states gen_cookie:80326634 recv_cookie:0 bpf prog error at line 97 "error at line 97" means the bpf prog cannot find the listening socket when the final ack is received. It then skipped processing the syncookie in the final ack which then led to "recv_cookie:0". The problem is the userspace program did not do accept() and went ahead to close(listen_fd) before the kernel (and the bpf prog) had a chance to process the final ack. The fix is to add accept() call so that the userspace will wait for the kernel to finish processing the final ack first before close()-ing everything. Fixes: 9a856cae2217 ("bpf: selftest: Add test_btf_skc_cls_ingress") Reported-by: Andrii Nakryiko <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-16selftest/bpf: Add a test that reads various addresses.Alexei Starovoitov2-0/+32
Add a function to bpf_testmod that returns invalid kernel and user addresses. Then attach an fexit program to that function that tries to read memory through these addresses. This logic checks that bpf_probe_read_kernel and BPF_PROBE_MEM logic is sane. Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2021-12-16selftests/bpf: Enable cross-building with clangJean-Philippe Brucker1-4/+4
Cross building using clang requires passing the "-target" flag rather than using the CROSS_COMPILE prefix. Makefile.include transforms CROSS_COMPILE into CLANG_CROSS_FLAGS. Clear CROSS_COMPILE for bpftool and the host libbpf, and use the clang flags for urandom_read and bench. Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-16tools/runqslower: Enable cross-building with clangJean-Philippe Brucker1-2/+2
Cross-building using clang requires passing the "-target" flag rather than using the CROSS_COMPILE prefix. Makefile.include transforms CROSS_COMPILE into CLANG_CROSS_FLAGS. Add them to CFLAGS, and erase CROSS_COMPILE for the bpftool build, since it needs to be executed on the host. Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-16bpftool: Enable cross-building with clangJean-Philippe Brucker1-6/+7
Cross-building using clang requires passing the "-target" flag rather than using the CROSS_COMPILE prefix. Makefile.include transforms CROSS_COMPILE into CLANG_CROSS_FLAGS, and adds that to CFLAGS. Remove the cross flags for the bootstrap bpftool, and erase the CROSS_COMPILE flag for the bootstrap libbpf. Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-16tools/libbpf: Enable cross-building with clangJean-Philippe Brucker1-1/+2
Cross-building using clang requires passing the "-target" flag rather than using the CROSS_COMPILE prefix. Makefile.include transforms CROSS_COMPILE into CLANG_CROSS_FLAGS. Add them to the CFLAGS. Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-16tools/resolve_btfids: Support cross-building the kernel with clangJean-Philippe Brucker1-0/+1
The CROSS_COMPILE variable may be present during resolve_btfids build if the kernel is being cross-built. Since resolve_btfids is always executed on the host, we set CC to HOSTCC in order to use the host toolchain when cross-building with GCC. But instead of a toolchain prefix, cross-build with clang uses a "-target" parameter, which Makefile.include deduces from the CROSS_COMPILE variable. In order to avoid cross-building libbpf, clear CROSS_COMPILE before building resolve_btfids. Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-16tools: Help cross-building with clangJean-Philippe Brucker1-1/+12
Cross-compilation with clang uses the -target parameter rather than a toolchain prefix. Just like the kernel Makefile, add that parameter to CFLAGS when CROSS_COMPILE is set. Unlike the kernel Makefile, we use the --sysroot and --gcc-toolchain options because unlike the kernel, tools require standard libraries. Commit c91d4e47e10e ("Makefile: Remove '--gcc-toolchain' flag") provides some background about --gcc-toolchain. Normally clang finds on its own the additional utilities and libraries that it needs (for example GNU ld or glibc). On some systems however, this autodetection doesn't work. There, our only recourse is asking GCC directly, and pass the result to --sysroot and --gcc-toolchain. Of course that only works when a cross GCC is available. Autodetection worked fine on Debian, but to use the aarch64-linux-gnu toolchain from Archlinux I needed both --sysroot (for crt1.o) and --gcc-toolchain (for crtbegin.o, -lgcc). The --prefix parameter wasn't needed there, but it might be useful on other distributions. Use the CLANG_CROSS_FLAGS variable instead of CLANG_FLAGS because it allows tools such as bpftool, that need to build both host and target binaries, to easily filter out the cross-build flags from CFLAGS. Signed-off-by: Jean-Philippe Brucker <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Quentin Monnet <[email protected]> Acked-by: Nick Desaulniers <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-16perf test: Test 73 Sig_trap fails on s390Thomas Richter1-0/+18
In Linux next commit 5504f67944484495 ("perf test sigtrap: Add basic stress test for sigtrap handling") introduced the new test which uses breakpoint events. These events are not supported on s390 and PowerPC and always fail: # perf test -F 73 73: Sigtrap : FAILED! # Fix it the same way as in the breakpoint tests in file tests/bp_account.c where these type of tests are skipped on s390 and PowerPC platforms. With this patch skip this test on both platforms. Output after: # perf test -F 73 73: Sigtrap # Fixes: 5504f67944484495 ("perf test sigtrap: Add basic stress test for sigtrap handling") Signed-off-by: Thomas Richter <[email protected]> Acked-by: Marco Elver <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vasily Gorbik <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-16bpf, selftests: Add test case trying to taint map value pointerDaniel Borkmann1-0/+23
Add a test case which tries to taint map value pointer arithmetic into a unknown scalar with subsequent export through the map. Before fix: # ./test_verifier 1186 #1186/u map access: trying to leak tained dst reg FAIL Unexpected success to load! verification time 24 usec stack depth 8 processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 #1186/p map access: trying to leak tained dst reg FAIL Unexpected success to load! verification time 8 usec stack depth 8 processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 Summary: 0 PASSED, 0 SKIPPED, 2 FAILED After fix: # ./test_verifier 1186 #1186/u map access: trying to leak tained dst reg OK #1186/p map access: trying to leak tained dst reg OK Summary: 2 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]>
2021-12-16perf ftrace: Implement cpu and task filters in BPFNamhyung Kim2-1/+62
Honor cpu and task options to set up filters (by pid or tid) in the BPF program. For example, the following command will show latency of the mutex_lock for process 2570. # perf ftrace latency -b -T mutex_lock -p 2570 sleep 3 # DURATION | COUNT | GRAPH | 0 - 1 us | 675 | ############################## | 1 - 2 us | 9 | | 2 - 4 us | 0 | | 4 - 8 us | 0 | | 8 - 16 us | 0 | | 16 - 32 us | 0 | | 32 - 64 us | 0 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | Committer testing: Looking at faults on a firefox process: # strace -e bpf perf ftrace latency -b -p 1674378 -T __handle_mm_fault bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffee1fee740, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\20\0\0\0\20\0\0\0\5\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=45, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0000\0\0\0000\0\0\0\t\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=81, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\08\0\0\08\0\0\0\t\0\0\0\0\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=89, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\f\0\0\0\f\0\0\0\7\0\0\0\1\0\0\0\0\0\0\20"..., btf_log_buf=NULL, btf_size=43, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0000\0\0\0000\0\0\0\t\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=81, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0000\0\0\0000\0\0\0\5\0\0\0\0\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=77, btf_log_size=0, btf_log_level=0}, 128) = -1 EINVAL (Invalid argument) bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0 \3\0\0 \3\0\0\306\3\0\0\0\0\0\0\0\0\0\2"..., btf_log_buf=NULL, btf_size=1790, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_ARRAY, key_size=4, value_size=32, max_entries=1, map_flags=0, inner_map_fd=0, map_name="", map_ifindex=0, btf_fd=0, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 4 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=5, insns=0x7ffee1fee570, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 128) = 5 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_ARRAY, key_size=4, value_size=4, max_entries=1, map_flags=BPF_F_MMAPABLE, inner_map_fd=0, map_name="", map_ifindex=0, btf_fd=0, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 4 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffee1fee3c0, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="test", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 128) = 4 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=8, value_size=8, max_entries=10000, map_flags=0, inner_map_fd=0, map_name="functime", map_ifindex=0, btf_fd=3, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 4 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4, value_size=1, max_entries=1, map_flags=0, inner_map_fd=0, map_name="cpu_filter", map_ifindex=0, btf_fd=3, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 5 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4, value_size=1, max_entries=36, map_flags=0, inner_map_fd=0, map_name="task_filter", map_ifindex=0, btf_fd=3, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 6 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_PERCPU_ARRAY, key_size=4, value_size=8, max_entries=22, map_flags=0, inner_map_fd=0, map_name="latency", map_ifindex=0, btf_fd=3, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 7 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_ARRAY, key_size=4, value_size=12, max_entries=1, map_flags=BPF_F_MMAPABLE, inner_map_fd=0, map_name="func_lat.bss", map_ifindex=0, btf_fd=3, btf_key_type_id=0, btf_value_type_id=32, btf_vmlinux_value_type_id=0}, 128) = 8 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=8, key=0x7ffee1fee580, value=0x7f01d940a000, flags=BPF_ANY}, 128) = 0 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_KPROBE, insn_cnt=42, insns=0x1871f30, license="", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(5, 14, 16), prog_flags=0, prog_name="func_begin", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=3, func_info_rec_size=8, func_info=0x18746a0, func_info_cnt=1, line_info_rec_size=16, line_info=0x1874550, line_info_cnt=20, attach_btf_id=0, attach_prog_fd=0}, 128) = 9 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_KPROBE, insn_cnt=99, insns=0x18769b0, license="", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(5, 14, 16), prog_flags=0, prog_name="func_end", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=3, func_info_rec_size=8, func_info=0x188a640, func_info_cnt=1, line_info_rec_size=16, line_info=0x188a660, line_info_cnt=20, attach_btf_id=0, attach_prog_fd=0}, 128) = 10 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=6, key=0x7ffee1fee8e0, value=0x7ffee1fee8df, flags=BPF_ANY}, 128) = 0 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_TRACEPOINT, insn_cnt=2, insns=0x7ffee1fee3c0, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 128) = 12 bpf(BPF_LINK_CREATE, {link_create={prog_fd=12, target_fd=-1, attach_type=0x29 /* BPF_??? */, flags=0}}, 128) = -1 EINVAL (Invalid argument) ^Cstrace: Process 1702285 detached # DURATION | COUNT | GRAPH | 0 - 1 us | 109 | ################# | 1 - 2 us | 127 | ################### | 2 - 4 us | 36 | ##### | 4 - 8 us | 20 | ### | 8 - 16 us | 2 | | 16 - 32 us | 0 | | 32 - 64 us | 0 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-16perf ftrace: Add -b/--use-bpf option for latency subcommandNamhyung Kim6-67/+380
The -b/--use-bpf option is to use BPF to get latency info of kernel functions. It'd have better performance impact and I observed that latency of same function is smaller than before when using BPF. Committer testing: # strace -e bpf perf ftrace latency -b -T __handle_mm_fault -a sleep 1 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7fff51914e00, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\20\0\0\0\20\0\0\0\5\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=45, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0000\0\0\0000\0\0\0\t\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=81, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\08\0\0\08\0\0\0\t\0\0\0\0\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=89, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\f\0\0\0\f\0\0\0\7\0\0\0\1\0\0\0\0\0\0\20"..., btf_log_buf=NULL, btf_size=43, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0000\0\0\0000\0\0\0\t\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=81, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0000\0\0\0000\0\0\0\5\0\0\0\0\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=77, btf_log_size=0, btf_log_level=0}, 128) = -1 EINVAL (Invalid argument) bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\350\2\0\0\350\2\0\0\353\2\0\0\0\0\0\0\0\0\0\2"..., btf_log_buf=NULL, btf_size=1515, btf_log_size=0, btf_log_level=0}, 128) = 3 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_ARRAY, key_size=4, value_size=32, max_entries=1, map_flags=0, inner_map_fd=0, map_name="", map_ifindex=0, btf_fd=0, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 4 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=5, insns=0x7fff51914c30, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 128) = 5 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_ARRAY, key_size=4, value_size=4, max_entries=1, map_flags=BPF_F_MMAPABLE, inner_map_fd=0, map_name="", map_ifindex=0, btf_fd=0, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 4 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7fff51914a80, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="test", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 128) = 4 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=8, value_size=8, max_entries=10000, map_flags=0, inner_map_fd=0, map_name="functime", map_ifindex=0, btf_fd=3, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 4 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4, value_size=1, max_entries=1, map_flags=0, inner_map_fd=0, map_name="cpu_filter", map_ifindex=0, btf_fd=3, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 5 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4, value_size=1, max_entries=1, map_flags=0, inner_map_fd=0, map_name="task_filter", map_ifindex=0, btf_fd=3, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 7 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_PERCPU_ARRAY, key_size=4, value_size=8, max_entries=22, map_flags=0, inner_map_fd=0, map_name="latency", map_ifindex=0, btf_fd=3, btf_key_type_id=0, btf_value_type_id=0, btf_vmlinux_value_type_id=0}, 128) = 8 bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_ARRAY, key_size=4, value_size=4, max_entries=1, map_flags=BPF_F_MMAPABLE, inner_map_fd=0, map_name="func_lat.bss", map_ifindex=0, btf_fd=3, btf_key_type_id=0, btf_value_type_id=30, btf_vmlinux_value_type_id=0}, 128) = 9 bpf(BPF_MAP_UPDATE_ELEM, {map_fd=9, key=0x7fff51914c40, value=0x7f6e99be2000, flags=BPF_ANY}, 128) = 0 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_KPROBE, insn_cnt=18, insns=0x11e4160, license="", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(5, 14, 16), prog_flags=0, prog_name="func_begin", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=3, func_info_rec_size=8, func_info=0x11dfc50, func_info_cnt=1, line_info_rec_size=16, line_info=0x11e04c0, line_info_cnt=9, attach_btf_id=0, attach_prog_fd=0}, 128) = 10 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_KPROBE, insn_cnt=99, insns=0x11ded70, license="", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(5, 14, 16), prog_flags=0, prog_name="func_end", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=3, func_info_rec_size=8, func_info=0x11dfc70, func_info_cnt=1, line_info_rec_size=16, line_info=0x11f6e10, line_info_cnt=20, attach_btf_id=0, attach_prog_fd=0}, 128) = 11 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_TRACEPOINT, insn_cnt=2, insns=0x7fff51914a80, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 128) = 13 bpf(BPF_LINK_CREATE, {link_create={prog_fd=13, target_fd=-1, attach_type=0x29 /* BPF_??? */, flags=0}}, 128) = -1 EINVAL (Invalid argument) --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=1699992, si_uid=0, si_status=0, si_utime=0, si_stime=0} --- bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=8, key=0x7fff51914f84, value=0x11f6fa0, flags=BPF_ANY}, 128) = 0 # DURATION | COUNT | GRAPH | 0 - 1 us | 52 | ################### | 1 - 2 us | 36 | ############# | 2 - 4 us | 24 | ######### | 4 - 8 us | 7 | ## | 8 - 16 us | 1 | | 16 - 32 us | 0 | | 32 - 64 us | 0 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | +++ exited with 0 +++ # Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ Add missing util/cpumap.h include and removed unused 'fd' variable ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-16perf ftrace: Add 'latency' subcommandNamhyung Kim1-9/+276
The perf ftrace latency is to get a histogram of function execution time. Users should give a function name using -T option. This is implemented using function_graph tracer with the given function only. And it parses the output to extract the time. $ sudo perf ftrace latency -a -T mutex_lock sleep 1 # DURATION | COUNT | GRAPH | 0 - 1 us | 4596 | ######################## | 1 - 2 us | 1680 | ######### | 2 - 4 us | 1106 | ##### | 4 - 8 us | 546 | ## | 8 - 16 us | 562 | ### | 16 - 32 us | 1 | | 32 - 64 us | 0 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | Committer testing: Latency for the __handle_mm_fault kernel function, system wide for 1 second, see how one can go from the usual 'perf ftrace' output, now the same as for the 'perf ftrace trace' subcommand, to the new 'perf ftrace latency' subcommand: # perf ftrace -T __handle_mm_fault -a sleep 1 | wc -l 709 # perf ftrace -T __handle_mm_fault -a sleep 1 | wc -l 510 # perf ftrace -T __handle_mm_fault -a sleep 1 | head -20 # tracer: function # # entries-in-buffer/entries-written: 0/0 #P:32 # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | perf-exec-1685104 [007] 90638.894613: __handle_mm_fault <-handle_mm_fault perf-exec-1685104 [007] 90638.894620: __handle_mm_fault <-handle_mm_fault perf-exec-1685104 [007] 90638.894622: __handle_mm_fault <-handle_mm_fault perf-exec-1685104 [007] 90638.894635: __handle_mm_fault <-handle_mm_fault perf-exec-1685104 [007] 90638.894688: __handle_mm_fault <-handle_mm_fault perf-exec-1685104 [007] 90638.894702: __handle_mm_fault <-handle_mm_fault perf-exec-1685104 [007] 90638.894714: __handle_mm_fault <-handle_mm_fault perf-exec-1685104 [007] 90638.894728: __handle_mm_fault <-handle_mm_fault perf-exec-1685104 [007] 90638.894740: __handle_mm_fault <-handle_mm_fault perf-exec-1685104 [007] 90638.894751: __handle_mm_fault <-handle_mm_fault sleep-1685104 [007] 90638.894962: __handle_mm_fault <-handle_mm_fault sleep-1685104 [007] 90638.894977: __handle_mm_fault <-handle_mm_fault sleep-1685104 [007] 90638.894983: __handle_mm_fault <-handle_mm_fault sleep-1685104 [007] 90638.894995: __handle_mm_fault <-handle_mm_fault # perf ftrace latency -T __handle_mm_fault -a sleep 1 # DURATION | COUNT | GRAPH | 0 - 1 us | 125 | ###### | 1 - 2 us | 249 | ############# | 2 - 4 us | 455 | ######################## | 4 - 8 us | 37 | # | 8 - 16 us | 0 | | 16 - 32 us | 0 | | 32 - 64 us | 0 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-16perf ftrace: Move out common code from __cmd_ftraceNamhyung Kim1-30/+33
The signal setup code and evlist__prepare_workload() can be used for other subcommands. Let's move them out of the __cmd_ftrace(). Then it doesn't need to pass argc and argv. On the other hand, select_tracer() is specific to the 'trace' subcommand so it'd better moving it into the __cmd_ftrace(). Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-16perf ftrace: Add 'trace' subcommandNamhyung Kim1-12/+23
This is a preparation to add more sub-commands for ftrace. The 'trace' subcommand does the same thing when no subcommand is given. Committer testing: The previous mode, i.e. no subcommand and the new 'perf ftrace trace' are equivalent: # perf ftrace -G check_preempt_curr sleep 0.00001 # tracer: function_graph # # CPU DURATION FUNCTION CALLS # | | | | | | | 25) | check_preempt_curr() { 25) | resched_curr() { 25) | native_smp_send_reschedule() { 25) | default_send_IPI_single_phys() { 25) 0.110 us | __default_send_IPI_dest_field(); 25) 0.490 us | } 25) 0.640 us | } 25) 0.850 us | } 25) 2.060 us | } # perf ftrace trace -G check_preempt_curr sleep 0.00001 # tracer: function_graph # # CPU DURATION FUNCTION CALLS # | | | | | | | 10) | check_preempt_curr() { 10) | resched_curr() { 10) | native_smp_send_reschedule() { 10) | default_send_IPI_single_phys() { 10) 0.080 us | __default_send_IPI_dest_field(); 10) 0.460 us | } 10) 0.610 us | } 10) 0.830 us | } 10) 2.020 us | } # Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Jajeev <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-16perf arch: Support register names from all archsGerman Gomez13-601/+697
When reading a perf.data file with register values, there is a mismatch between the names and the values of the registers because the tool is built using only the register names from the local architecture. Reading a perf.data file that was recorded on ARM64, gives the following erroneous output on an X86 machine: # perf report -i perf_arm64.data -D [...] 24661932634451 0x698 [0x21d0]: PERF_RECORD_SAMPLE(IP, 0x1): 43239/43239: 0xffffc5be8f100f98 period: 1 addr: 0 ... user regs: mask 0x1ffffffff ABI 64-bit .... AX 0x0000ffffd1515817 .... BX 0x0000ffffd1515480 .... CX 0x0000aaaadabf6c80 .... DX 0x000000000000002e .... SI 0x0000000040100401 .... DI 0x0040600200000080 .... BP 0x0000ffffd1510e10 .... SP 0x0000000000000000 .... IP 0x00000000000000dd .... FLAGS 0x0000ffffd1510cd0 .... CS 0x0000000000000000 .... SS 0x0000000000000030 .... DS 0x0000ffffa569a208 .... ES 0x0000000000000000 .... FS 0x0000000000000000 .... GS 0x0000000000000000 .... R8 0x0000aaaad3de9650 .... R9 0x0000ffffa57397f0 .... R10 0x0000000000000001 .... R11 0x0000ffffa57fd000 .... R12 0x0000ffffd1515817 .... R13 0x0000ffffd1515480 .... R14 0x0000aaaadabf6c80 .... R15 0x0000000000000000 .... unknown 0x0000000000000001 .... unknown 0x0000000000000000 .... unknown 0x0000000000000000 .... unknown 0x0000000000000000 .... unknown 0x0000000000000000 .... unknown 0x0000ffffd1510d90 .... unknown 0x0000ffffa5739b90 .... unknown 0x0000ffffd1510d80 .... XMM0 0x0000ffffa57392c8 ... thread: perf-exec:43239 ...... dso: [kernel.kallsyms] As can be seen, the register names correspond to X86 registers, even though the perf.data file was recorded on an ARM64 system. After this patch, the output of the command displays the correct register names: # perf report -i perf_arm64.data -D [...] 24661932634451 0x698 [0x21d0]: PERF_RECORD_SAMPLE(IP, 0x1): 43239/43239: 0xffffc5be8f100f98 period: 1 addr: 0 ... user regs: mask 0x1ffffffff ABI 64-bit .... x0 0x0000ffffd1515817 .... x1 0x0000ffffd1515480 .... x2 0x0000aaaadabf6c80 .... x3 0x000000000000002e .... x4 0x0000000040100401 .... x5 0x0040600200000080 .... x6 0x0000ffffd1510e10 .... x7 0x0000000000000000 .... x8 0x00000000000000dd .... x9 0x0000ffffd1510cd0 .... x10 0x0000000000000000 .... x11 0x0000000000000030 .... x12 0x0000ffffa569a208 .... x13 0x0000000000000000 .... x14 0x0000000000000000 .... x15 0x0000000000000000 .... x16 0x0000aaaad3de9650 .... x17 0x0000ffffa57397f0 .... x18 0x0000000000000001 .... x19 0x0000ffffa57fd000 .... x20 0x0000ffffd1515817 .... x21 0x0000ffffd1515480 .... x22 0x0000aaaadabf6c80 .... x23 0x0000000000000000 .... x24 0x0000000000000001 .... x25 0x0000000000000000 .... x26 0x0000000000000000 .... x27 0x0000000000000000 .... x28 0x0000000000000000 .... x29 0x0000ffffd1510d90 .... lr 0x0000ffffa5739b90 .... sp 0x0000ffffd1510d80 .... pc 0x0000ffffa57392c8 ... thread: perf-exec:43239 ...... dso: [kernel.kallsyms] Tester comments: Athira reports: "Looks good to me. Tested this patchset in powerpc by capturing regs in powerpc and doing perf report to read the data from x86." Reported-by: Alexandre Truong <[email protected]> Reviewed-by: Athira Jajeev <[email protected]> Signed-off-by: German Gomez <[email protected]> Tested-by: Athira Jajeev <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-16perf arm64: Rename perf_event_arm_regs for ARM64 registersGerman Gomez2-0/+4
The registers for ARM and ARM64 are enumerated using two enums that have the same name. In order to be able to import both headers, the name of one can be replaced using the C preprocessor like so: #define perf_event_arm_regs perf_event_arm64_regs #include <asm/perf_regs.h> #undef perf_event_arm_regs This patch updates all imports of ARM64's perf_regs.h in order to prevent the naming collision. Reviewed-by: Athira Jajeev <[email protected]> Signed-off-by: German Gomez <[email protected]> Tested-by: Athira Jajeev <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-16perf namespaces: Add helper nsinfo__is_in_root_namespace()Leo Yan2-30/+48
Refactors code for gathering PID infos, it creates the function nsinfo__get_nspid() to parse process 'status' node in folder '/proc'. Base on the refactoring, this patch introduces a new helper nsinfo__is_in_root_namespace(), it returns true when the caller runs in the root PID namespace. Signed-off-by: Leo Yan <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: John Garry <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Yonatan Goldschmidt <[email protected]> Cc: Yonghong Song <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-16libperf tests: Fix a spelling mistake "Runnnig" -> "Running"Colin Ian King1-1/+1
There is a spelling mistake in a __T_VERBOSE message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.