aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2020-08-24tcp: bpf: Add TCP_BPF_DELACK_MAX setsockoptMartin KaFai Lau1-0/+1
This change is mostly from an internal patch and adapts it from sysctl config to the bpf_setsockopt setup. The bpf_prog can set the max delay ack by using bpf_setsockopt(TCP_BPF_DELACK_MAX). This max delay ack can be communicated to its peer through bpf header option. The receiving peer can then use this max delay ack and set a potentially lower rto by using bpf_setsockopt(TCP_BPF_RTO_MIN) which will be introduced in the next patch. Another later selftest patch will also use it like the above to show how to write and parse bpf tcp header option. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-24selftests/powerpc: Update PROT_SAO test to skip ISA 3.1Shawn Anastasio1-2/+3
Since SAO support was removed from ISA 3.1, skip the prot_sao test if PPC_FEATURE2_ARCH_3_1 is set. Signed-off-by: Shawn Anastasio <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-24Revert "powerpc/64s: Remove PROT_SAO support"Shawn Anastasio3-1/+46
This reverts commit 5c9fa16e8abd342ce04dc830c1ebb2a03abf6c05. Since PROT_SAO can still be useful for certain classes of software, reintroduce it. Concerns about guest migration for LPARs using SAO will be addressed next. Signed-off-by: Shawn Anastasio <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller9-12/+49
2020-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds8-10/+47
Pull networking fixes from David Miller: "Nothing earth shattering here, lots of small fixes (f.e. missing RCU protection, bad ref counting, missing memset(), etc.) all over the place: 1) Use get_file_rcu() in task_file iterator, from Yonghong Song. 2) There are two ways to set remote source MAC addresses in macvlan driver, but only one of which validates things properly. Fix this. From Alvin Šipraga. 3) Missing of_node_put() in gianfar probing, from Sumera Priyadarsini. 4) Preserve device wanted feature bits across multiple netlink ethtool requests, from Maxim Mikityanskiy. 5) Fix rcu_sched stall in task and task_file bpf iterators, from Yonghong Song. 6) Avoid reset after device destroy in ena driver, from Shay Agroskin. 7) Missing memset() in netlink policy export reallocation path, from Johannes Berg. 8) Fix info leak in __smc_diag_dump(), from Peilin Ye. 9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark Tomlinson. 10) Fix number of data stream negotiation in SCTP, from David Laight. 11) Fix double free in connection tracker action module, from Alaa Hleihel. 12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) net: nexthop: don't allow empty NHA_GROUP bpf: Fix two typos in uapi/linux/bpf.h net: dsa: b53: check for timeout tipc: call rcu_read_lock() in tipc_aead_encrypt_done() net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow net: sctp: Fix negotiation of the number of data streams. dt-bindings: net: renesas, ether: Improve schema validation gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit() hv_netvsc: Remove "unlikely" from netvsc_select_queue bpf: selftests: global_funcs: Check err_str before strstr bpf: xdp: Fix XDP mode when no mode flags specified selftests/bpf: Remove test_align leftovers tools/resolve_btfids: Fix sections with wrong alignment net/smc: Prevent kernel-infoleak in __smc_diag_dump() sfc: fix build warnings on 32-bit net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified" libbpf: Fix map index used in error message net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe() net: atlantic: Use readx_poll_timeout() for large timeout ...
2020-08-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-2/+2
Pull kvm fixes from Paolo Bonzini: - PAE and PKU bugfixes for x86 - selftests fix for new binutils - MMU notifier fix for arm64 * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set KVM: Pass MMU notifier range flags to kvm_unmap_hva_range() kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode KVM: x86: fix access code passed to gva_to_gpa selftests: kvm: Use a shorter encoding to clear RAX
2020-08-22iio: add IIO_MOD_O2 modifierMatt Ranostay1-0/+2
Add modifier IIO_MOD_O2 for O2 concentration reporting Signed-off-by: Matt Ranostay <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2020-08-21libbpf: Normalize and improve logging across few functionsAndrii Nakryiko1-50/+67
Make libbpf logs follow similar pattern and provide more context like section name or program name, where appropriate. Also, add BPF_INSN_SZ constant and use it throughout to clean up code a little bit. This commit doesn't have any functional changes and just removes some code changes out of the way before bigger refactoring in libbpf internals. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-21libbpf: Skip well-known ELF sections when iterating ELFAndrii Nakryiko1-6/+49
Skip and don't log ELF sections that libbpf knows about and ignores during ELF processing. This allows to not unnecessarily log details about those ELF sections and cleans up libbpf debug log. Ignored sections include DWARF data, string table, empty .text section and few special (e.g., .llvm_addrsig) useless sections. With such ELF sections out of the way, log unrecognized ELF sections at pr_info level to increase visibility. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-21libbpf: Add __noinline macro to bpf_helpers.hAndrii Nakryiko1-0/+3
__noinline is pretty frequently used, especially with BPF subprograms, so add them along the __always_inline, for user convenience and completeness. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-21libbpf: Factor out common ELF operations and improve loggingAndrii Nakryiko1-161/+206
Factor out common ELF operations done throughout the libbpf. This simplifies usage across multiple places in libbpf, as well as hide error reporting from higher-level functions and make error logging more consistent. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-21selftests/bpf: BPF object files should depend only on libbpf headersAndrii Nakryiko1-1/+1
There is no need to re-build BPF object files if any of the sources of libbpf change. So record more precise dependency only on libbpf/bpf_*.h headers. This eliminates unnecessary re-builds. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-21selftests: bpf: Test sockmap update from BPFLorenz Bauer3-0/+149
Add a test which copies a socket from a sockmap into another sockmap or sockhash. This excercises bpf_map_update_elem support from BPF context. Compare the socket cookies from source and destination to ensure that the copy succeeded. Also check that the verifier rejects map_update from unsafe contexts. Signed-off-by: Lorenz Bauer <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-21libbpf: Add perf_buffer APIs for better integration with outside epoll loopAndrii Nakryiko4-12/+121
Add a set of APIs to perf_buffer manage to allow applications to integrate perf buffer polling into existing epoll-based infrastructure. One example is applications using libevent already and wanting to plug perf_buffer polling, instead of relying on perf_buffer__poll() and waste an extra thread to do it. But perf_buffer is still extremely useful to set up and consume perf buffer rings even for such use cases. So to accomodate such new use cases, add three new APIs: - perf_buffer__buffer_cnt() returns number of per-CPU buffers maintained by given instance of perf_buffer manager; - perf_buffer__buffer_fd() returns FD of perf_event corresponding to a specified per-CPU buffer; this FD is then polled independently; - perf_buffer__consume_buffer() consumes data from single per-CPU buffer, identified by its slot index. To support a simpler, but less efficient, way to integrate perf_buffer into external polling logic, also expose underlying epoll FD through perf_buffer__epoll_fd() API. It will need to be followed by perf_buffer__poll(), wasting extra syscall, or perf_buffer__consume(), wasting CPU to iterate buffers with no data. But could be simpler and more convenient for some cases. These APIs allow for great flexiblity, but do not sacrifice general usability of perf_buffer. Also exercise and check new APIs in perf_buffer selftest. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-21bpftool: Implement link_query for bpf iteratorsYonghong Song1-3/+41
The link query for bpf iterators is implemented. Besides being shown to the user what bpf iterator the link represents, the target_name is also used to filter out what additional information should be printed out, e.g., whether map_id should be shown or not. The following is an example of bpf_iter link dump, plain output or pretty output. $ bpftool link show 11: iter prog 59 target_name task pids test_progs(1749) 34: iter prog 173 target_name bpf_map_elem map_id 127 pids test_progs_1(1753) $ bpftool -p link show [{ "id": 11, "type": "iter", "prog_id": 59, "target_name": "task", "pids": [{ "pid": 1749, "comm": "test_progs" } ] },{ "id": 34, "type": "iter", "prog_id": 173, "target_name": "bpf_map_elem", "map_id": 127, "pids": [{ "pid": 1753, "comm": "test_progs_1" } ] } ] Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-21bpf: Implement link_query for bpf iteratorsYonghong Song1-0/+7
This patch implemented bpf_link callback functions show_fdinfo and fill_link_info to support link_query interface. The general interface for show_fdinfo and fill_link_info will print/fill the target_name. Each targets can register show_fdinfo and fill_link_info callbacks to print/fill more target specific information. For example, the below is a fdinfo result for a bpf task iterator. $ cat /proc/1749/fdinfo/7 pos: 0 flags: 02000000 mnt_id: 14 link_type: iter link_id: 11 prog_tag: 990e1f8152f7e54f prog_id: 59 target_name: task Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller8-10/+47
Alexei Starovoitov says: ==================== pull-request: bpf 2020-08-21 The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 5 day(s) which contain a total of 12 files changed, 78 insertions(+), 24 deletions(-). The main changes are: 1) three fixes in BPF task iterator logic, from Yonghong. 2) fix for compressed dwarf sections in vmlinux, from Jiri. 3) fix xdp attach regression, from Andrii. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-08-21bpf: Fix two typos in uapi/linux/bpf.hTobias Klauser1-5/+5
Also remove trailing whitespaces in bpf_skb_get_tunnel_key example code. Signed-off-by: Tobias Klauser <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-21perf: arm-spe: Fix check error when synthesizing eventsWei Li1-3/+3
In arm_spe_read_record(), when we are processing an events packet, 'decoder->packet.index' is the length of payload, which has been transformed in payloadlen(). So correct the check of 'idx'. Signed-off-by: Wei Li <[email protected]> Reviewed-by: Leo Yan <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Hanjun Guo <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-21perf symbols: Add mwait_idle_with_hints.constprop.0 to the list of idle symbolsArnaldo Carvalho de Melo1-0/+1
The "mwait_idle_with_hints" one was already there, some compiler artifact now adds this ".constprop.0" suffix, cover that one too. At some point we need to put these in a special bucket and show it somewhere on the screen. Noticed building the kernel on a fedora:32 system using: gcc version 10.2.1 20200723 (Red Hat 10.2.1-1) (GCC) Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-21perf top: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not setTiezhu Yang1-0/+2
When I execute 'perf top' without HAVE_LIBBPF_SUPPORT, there exists the following segmentation fault, skip the side-band event setup to fix it, this is similar with commit 1101c872c8c7 ("perf record: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set"). [yangtiezhu@linux perf]$ ./perf top <SNIP> perf: Segmentation fault Obtained 6 stack frames. ./perf(sighandler_dump_stack+0x5c) [0x12011b604] [0xffffffc010] ./perf(perf_mmap__read_init+0x3e) [0x1201feeae] ./perf() [0x1200d715c] /lib64/libpthread.so.0(+0xab9c) [0xffee10ab9c] /lib64/libc.so.6(+0x128f4c) [0xffedc08f4c] Segmentation fault [yangtiezhu@linux perf]$ I use git bisect to find commit b38d85ef49cf ("perf bpf: Decouple creating the evlist from adding the SB event") is the first bad commit, so also add the Fixes tag. Committer testing: First build perf explicitely disabling libbpf: $ make NO_LIBBPF=1 O=/tmp/build/perf -C tools/perf install-bin && perf test python Now make sure it isn't linked: $ perf -vv | grep -w bpf bpf: [ OFF ] # HAVE_LIBBPF_SUPPORT $ $ nm ~/bin/perf | grep libbpf $ And now try to run 'perf top': # perf top perf: Segmentation fault -------- backtrace -------- perf[0x5bcd6d] /lib64/libc.so.6(+0x3ca6f)[0x7fd0f5a66a6f] perf(perf_mmap__read_init+0x1e)[0x5e1afe] perf[0x4cc468] /lib64/libpthread.so.0(+0x9431)[0x7fd0f645a431] /lib64/libc.so.6(clone+0x42)[0x7fd0f5b2b912] # Applying this patch fixes the issue. Fixes: b38d85ef49cf ("perf bpf: Decouple creating the evlist from adding the SB event") Signed-off-by: Tiezhu Yang <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Xuefeng Li <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-21perf sched timehist: Fix use of CPU list with summary optionDavid Ahern1-1/+5
Do not update thread stats or show idle summary unless CPU is in the list of interest. Fixes: c30d630d1bcfad8d ("perf sched timehist: Add support for filtering on CPU") Signed-off-by: David Ahern <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-21perf test: Fix basic bpf filtering testSumanth Korikkar1-1/+1
BPF basic filtering test fails on s390x (when vmlinux debuginfo is utilized instead of /proc/kallsyms) Info: - bpf_probe_load installs the bpf code at do_epoll_wait. - For s390x, do_epoll_wait resolves to 3 functions including inlines. found inline addr: 0x43769e Probe point found: __s390_sys_epoll_wait+6 found inline addr: 0x437290 Probe point found: do_epoll_wait+0 found inline addr: 0x4375d6 Probe point found: __se_sys_epoll_wait+6 - add_bpf_event creates evsel for every probe in a BPF object. This results in 3 evsels. Solution: - Expected result = 50% of the samples to be collected from epoll_wait * number of entries present in the evlist. Committer testing: # perf test 42 42: BPF filter : 42.1: Basic BPF filtering : Ok 42.2: BPF pinning : Ok 42.3: BPF prologue generation : Ok 42.4: BPF relocation checker : Ok # Signed-off-by: Sumanth Korikkar <[email protected]> Reviewed-by: Thomas Richter <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: [email protected] Cc: Heiko Carstens <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Sven Schnelle <[email protected]> LPU-Reference: [email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-20selftests: net: tcp_mmap: Use huge pages in receive pathEric Dumazet1-4/+5
One down side of using TCP rx zerocopy is one extra TLB miss per page after the mapping operation. While if the application is using hugepages, the non zerocopy recvmsg() will not have to pay these TLB costs. This patch allows server side to use huge pages for the non zero copy case, to allow fair comparisons when both solutions use optimal conditions. Signed-off-by: Eric Dumazet <[email protected]> Cc: Arjun Roy <[email protected]> Cc: Soheil Hassas Yeganeh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-20selftests: net: tcp_mmap: Use huge pages in send pathEric Dumazet1-3/+26
There are significant gains using huge pages when available, as shown in [1]. This patch adds mmap_large_buffer() and uses it in client side (tx path of this reference tool) Following patch will use the feature for server side. [1] https://patchwork.ozlabs.org/project/netdev/patch/[email protected]/ Signed-off-by: Eric Dumazet <[email protected]> Cc: Arjun Roy <[email protected]> Cc: Soheil Hassas Yeganeh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-20selftests: net: tcp_mmap: use madvise(MADV_DONTNEED)Eric Dumazet1-0/+4
When TCP_ZEROCOPY_RECEIVE operation has been added, I made the mistake of automatically un-mapping prior content before mapping new pages. This has the unfortunate effect of adding potentially long MMU operations (like TLB flushes) while socket lock is held. Using madvise(MADV_DONTNEED) right after pages has been used has two benefits : 1) This releases pages sooner, allowing pages to be recycled if they were part of a page pool in a NIC driver. 2) No more long unmap operations while preventing immediate processing of incoming packets. The cost of the added system call is small enough. Arjun will submit a kernel patch allowing to opt out from the unmap attempt in tcp_zerocopy_receive() Signed-off-by: Eric Dumazet <[email protected]> Cc: Arjun Roy <[email protected]> Cc: Soheil Hassas Yeganeh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-20selftests/timers: Turn off timeout settingPo-Hsu Lin2-0/+2
The following 4 tests in timers can take longer than the default 45 seconds that added in commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") to run: * nsleep-lat - 2m7.350s * set-timer-lat - 2m0.66s * inconsistency-check - 1m45.074s * raw_skew - 2m0.013s Thus they will be marked as failed with the current 45s setting: not ok 3 selftests: timers: nsleep-lat # TIMEOUT not ok 4 selftests: timers: set-timer-lat # TIMEOUT not ok 6 selftests: timers: inconsistency-check # TIMEOUT not ok 7 selftests: timers: raw_skew # TIMEOUT Disable the timeout setting for timers can make these tests finish properly: ok 3 selftests: timers: nsleep-lat ok 4 selftests: timers: set-timer-lat ok 6 selftests: timers: inconsistency-check ok 7 selftests: timers: raw_skew https://bugs.launchpad.net/bugs/1864626 Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Signed-off-by: Po-Hsu Lin <[email protected]> Acked-by: John Stultz <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-08-20bpf: selftests: global_funcs: Check err_str before strstrYauheni Kaliuta1-1/+1
The error path in libbpf.c:load_program() has calls to pr_warn() which ends up for global_funcs tests to test_global_funcs.c:libbpf_debug_print(). For the tests with no struct test_def::err_str initialized with a string, it causes call of strstr() with NULL as the second argument and it segfaults. Fix it by calling strstr() only for non-NULL err_str. Signed-off-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20selftests/bpf: Remove test_align leftoversVeronika Kabatova2-2/+1
Calling generic selftests "make install" fails as rsync expects all files from TEST_GEN_PROGS to be present. The binary is not generated anymore (commit 3b09d27cc93d) so we can safely remove it from there and also from gitignore. Fixes: 3b09d27cc93d ("selftests/bpf: Move test_align under test_progs") Signed-off-by: Veronika Kabatova <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20tools/resolve_btfids: Fix sections with wrong alignmentJiri Olsa1-0/+36
The data of compressed section should be aligned to 4 (for 32bit) or 8 (for 64 bit) bytes. The binutils ld sets sh_addralign to 1, which makes libelf fail with misaligned section error during the update as reported by Jesper: FAILED elf_update(WRITE): invalid section alignment While waiting for ld fix, we can fix compressed sections sh_addralign value manually. Adding warning in -vv mode when the fix is triggered: $ ./tools/bpf/resolve_btfids/resolve_btfids -vv vmlinux ... section(36) .comment, size 44, link 0, flags 30, type=1 section(37) .debug_aranges, size 45684, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 16, expected 8 section(38) .debug_info, size 129104957, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 1, expected 8 section(39) .debug_abbrev, size 1152583, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 1, expected 8 section(40) .debug_line, size 7374522, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 1, expected 8 section(41) .debug_frame, size 702463, link 0, flags 800, type=1 section(42) .debug_str, size 1017571, link 0, flags 830, type=1 - fixing wrong alignment sh_addralign 1, expected 8 section(43) .debug_loc, size 3019453, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 1, expected 8 section(44) .debug_ranges, size 1744583, link 0, flags 800, type=1 - fixing wrong alignment sh_addralign 16, expected 8 section(45) .symtab, size 2955888, link 46, flags 0, type=2 section(46) .strtab, size 2613072, link 0, flags 0, type=3 ... update ok for vmlinux Another workaround is to disable compressed debug info data CONFIG_DEBUG_INFO_COMPRESSED kernel option. Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Reported-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Yonghong Song <[email protected]> Cc: Mark Wielaard <[email protected]> Cc: Nick Clifton <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20cpupower: speed up generating git version stringMartin Kaistra1-1/+1
The variable VERSION is expanded for every use of CFLAGS. This causes "git describe" to get called multiple times on the kernel tree, which can be quite slow. The git revision does not change during build, so we can use simple variable expansion to set VERSION. Signed-off-by: Martin Kaistra <[email protected]> Acked-by: Thomas Renninger <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-08-20cpupowerutils: fix spelling mistake "dependant" -> "dependent"Colin Ian King1-1/+1
There is a spelling mistake in a message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2020-08-20selftests/bpf: List newest Clang built-ins needed for some CO-RE selftestsAndrii Nakryiko2-1/+24
Record which built-ins are optional and needed for some of recent BPF CO-RE subtests. Document Clang diff that fixed corner-case issue with __builtin_btf_type_id(). Suggested-by: Alexei Starovoitov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20selftests/bpf: Fix two minor compilation warnings reported by GCC 4.9Andrii Nakryiko2-1/+3
GCC 4.9 seems to be more strict in some regards. Fix two minor issue it reported. Fixes: 1c1052e0140a ("tools/testing/selftests/bpf: Add self-tests for new helper bpf_get_ns_current_pid_tgid.") Fixes: 2d7824ffd25c ("selftests: bpf: Add test for sk_assign") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20libbpf: Fix libbpf build on compilers missing __builtin_mul_overflowAndrii Nakryiko1-0/+10
GCC compilers older than version 5 don't support __builtin_mul_overflow yet. Given GCC 4.9 is the minimal supported compiler for building kernel and the fact that libbpf is a dependency of resolve_btfids, which is dependency of CONFIG_DEBUG_INFO_BTF=y, this needs to be handled. This patch fixes the issue by falling back to slower detection of integer overflow in such cases. Fixes: 029258d7b228 ("libbpf: Remove any use of reallocarray() in libbpf") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20libbpf: Fix detection of BPF helper call instructionAndrii Nakryiko1-6/+4
BPF_CALL | BPF_JMP32 is explicitly not allowed by verifier for BPF helper calls, so don't detect it as a valid call. Also drop the check on func_id pointer, as it's currently always non-null. Fixes: 109cea5a594f ("libbpf: Sanitize BPF program code for bpf_probe_read_{kernel, user}[_str]") Reported-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20libbpf: Fix map index used in error messageToke Høiland-Jørgensen1-1/+1
The error message emitted by bpf_object__init_user_btf_maps() was using the wrong section ID. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20selftests/bpf: Add bpffs preload test.Alexei Starovoitov1-0/+94
Add a test that mounts two bpffs instances and checks progs.debug and maps.debug for sanity data. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20bpf: Add kernel module with user mode driver that populates bpffs.Alexei Starovoitov1-2/+5
Add kernel module with user mode driver that populates bpffs with BPF iterators. $ mount bpffs /my/bpffs/ -t bpf $ ls -la /my/bpffs/ total 4 drwxrwxrwt 2 root root 0 Jul 2 00:27 . drwxr-xr-x 19 root root 4096 Jul 2 00:09 .. -rw------- 1 root root 0 Jul 2 00:27 maps.debug -rw------- 1 root root 0 Jul 2 00:27 progs.debug The user mode driver will load BPF Type Formats, create BPF maps, populate BPF maps, load two BPF programs, attach them to BPF iterators, and finally send two bpf_link IDs back to the kernel. The kernel will pin two bpf_links into newly mounted bpffs instance under names "progs.debug" and "maps.debug". These two files become human readable. $ cat /my/bpffs/progs.debug id name attached 11 dump_bpf_map bpf_iter_bpf_map 12 dump_bpf_prog bpf_iter_bpf_prog 27 test_pkt_access 32 test_main test_pkt_access test_pkt_access 33 test_subprog1 test_pkt_access_subprog1 test_pkt_access 34 test_subprog2 test_pkt_access_subprog2 test_pkt_access 35 test_subprog3 test_pkt_access_subprog3 test_pkt_access 36 new_get_skb_len get_skb_len test_pkt_access 37 new_get_skb_ifindex get_skb_ifindex test_pkt_access 38 new_get_constant get_constant test_pkt_access The BPF program dump_bpf_prog() in iterators.bpf.c is printing this data about all BPF programs currently loaded in the system. This information is unstable and will change from kernel to kernel as ".debug" suffix conveys. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20libbpf: Simplify the return expression of build_map_pin_path()Xu Wang1-6/+2
Simplify the return expression. Signed-off-by: Xu Wang <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-20tracing: switch to kernel_clone()Christian Brauner16-35/+35
The old _do_fork() helper is removed in favor of the new kernel_clone() helper. The latter adheres to naming conventions for kernel internal syscall helpers. Signed-off-by: Christian Brauner <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: Alexandre Chartre <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Xiao Yang <[email protected]> Cc: Tom Zanussi <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2020-08-19selftests/bpf: Add tests for ENUMVAL_EXISTS/ENUMVAL_VALUE relocationsAndrii Nakryiko7-0/+224
Add tests validating existence and value relocations for enum value-based relocations. If __builtin_preserve_enum_value() built-in is not supported, skip tests. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-19libbpf: Implement enum value-based CO-RE relocationsAndrii Nakryiko3-5/+170
Implement two relocations of a new enumerator value-based CO-RE relocation kind: ENUMVAL_EXISTS and ENUMVAL_VALUE. First, ENUMVAL_EXISTS, allows to detect the presence of a named enumerator value in the target (kernel) BTF. This is useful to do BPF helper/map/program type support detection from BPF program side. bpf_core_enum_value_exists() macro helper is provided to simplify built-in usage. Second, ENUMVAL_VALUE, allows to capture enumerator integer value and relocate it according to the target BTF, if it changes. This is useful to have a guarantee against intentional or accidental re-ordering/re-numbering of some of the internal (non-UAPI) enumerations, where kernel developers don't care about UAPI backwards compatiblity concerns. bpf_core_enum_value() allows to capture this succinctly and use correct enum values in code. LLVM uses ldimm64 instruction to capture enumerator value-based relocations, so add support for ldimm64 instruction patching as well. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-19selftests/bpf: Add CO-RE relo test for TYPE_ID_LOCAL/TYPE_ID_TARGETAndrii Nakryiko6-19/+323
Add tests for BTF type ID relocations. To allow testing this, enhance core_relo.c test runner to allow dynamic initialization of test inputs. If Clang doesn't have necessary support for new functionality, test is skipped. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-19selftests/bpf: Test TYPE_EXISTS and TYPE_SIZE CO-RE relocationsAndrii Nakryiko9-22/+446
Add selftests for TYPE_EXISTS and TYPE_SIZE relocations, testing correctness of relocations and handling of type compatiblity/incompatibility. If __builtin_preserve_type_info() is not supported by compiler, skip tests. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-19libbpf: Implement type-based CO-RE relocations supportAndrii Nakryiko3-24/+263
Implement support for TYPE_EXISTS/TYPE_SIZE/TYPE_ID_LOCAL/TYPE_ID_REMOTE relocations. These are examples of type-based relocations, as opposed to field-based relocations supported already. The difference is that they are calculating relocation values based on the type itself, not a field within a struct/union. Type-based relos have slightly different semantics when matching local types to kernel target types, see comments in bpf_core_types_are_compat() for details. Their behavior on failure to find target type in kernel BTF also differs. Instead of "poisoning" relocatable instruction and failing load subsequently in kernel, they return 0 (which is rarely a valid return result, so user BPF code can use that to detect success/failure of the relocation and deal with it without extra "guarding" relocations). Also, it's always possible to check existence of the type in target kernel with TYPE_EXISTS relocation, similarly to a field-based FIELD_EXISTS. TYPE_ID_LOCAL relocation is a bit special in that it always succeeds (barring any libbpf/Clang bugs) and resolved to BTF ID using **local** BTF info of BPF program itself. Tests in subsequent patches demonstrate the usage and semantics of new relocations. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-19tools: usb: move to tools buildsystemHeikki Krogerus2-8/+47
Converting the Makefile to use the new tools buildsystem. Signed-off-by: Heikki Krogerus <[email protected]> [fixes builds with O=...] Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-08-18tools: Remove feature-libelf-mmap feature detectionAndrii Nakryiko8-36/+8
It's trivial to handle missing ELF_C_MMAP_READ support in libelf the way that objtool has solved it in ("774bec3fddcc objtool: Add fallback from ELF_C_READ_MMAP to ELF_C_READ"). So instead of having an entire feature detector for that, just do what objtool does for perf and libbpf. And keep their Makefiles a bit simpler. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-18libbpf: Centralize poisoning and poison reallocarray()Andrii Nakryiko12-33/+13
Most of libbpf source files already include libbpf_internal.h, so it's a good place to centralize identifier poisoning. So move kernel integer type poisoning there. And also add reallocarray to a poison list to prevent accidental use of it. libbpf_reallocarray() should be used universally instead. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-18tools/bpftool: Remove libbpf_internal.h usage in bpftoolAndrii Nakryiko4-150/+288
Most netlink-related functions were unique to bpftool usage, so I moved them into net.c. Few functions are still used by both bpftool and libbpf itself internally, so I've copy-pasted them (libbpf_nl_get_link, libbpf_netlink_open). It's a bit of duplication of code, but better separation of libbpf as a library with public API and bpftool, relying on unexposed functions in libbpf. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.