| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The opts.{type, noconnect} is at least a bit non intuitive or unnecessary.
The only use case now is in test_bpf_ip_check_defrag_ok which ends up
bypassing most (or at least some) of the connect_to_fd_opts() logic. It's
much better that test should have its own connect_to_fd_opts() instead.
This patch adds a new "type" parameter for connect_to_fd_opts(), then
opts->type and getsockopt(SO_TYPE) can be replaced by "type" parameter in
it.
In connect_to_fd(), use getsockopt(SO_TYPE) to get "type" value and pass
it to connect_to_fd_opts().
In bpf_tcp_ca.c and cgroup_v1v2.c, "SOCK_STREAM" types are passed to
connect_to_fd_opts(), and in ip_check_defrag.c, different types "SOCK_RAW"
and "SOCK_DGRAM" are passed to it.
With these changes, the strcut member "type" of network_helper_opts can be
dropped now.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/cfd20b5ad4085c1d1af5e79df3b09013a407199f.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a89 ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bpf and netfilter.
Happy summer solstice! The line count is a bit inflated by a selftest
and update to a driver's FW interface header, in reality this is
slightly below average for us. We are expecting one driver fix from
Intel, but there are no big known issues.
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table"
* tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
selftests: virtio_net: add forgotten config options
bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
bnxt_en: Set TSO max segs on devices with limits
bnxt_en: Update firmware interface to 1.10.3.44
net: stmmac: Assign configured channel value to EXTTS event
net: do not leave a dangling sk pointer, when socket creation fails
net/tcp_ao: Don't leak ao_info on error-path
ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
ipv6: bring NLM_DONE out to a separate recv() again
selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
netfilter: ipset: Fix suspicious rcu_dereference_protected()
selftests: openvswitch: Set value to nla flags.
octeontx2-pf: Fix linking objects into multiple modules
octeontx2-pf: Add error handling to VLAN unoffload handling
virtio_net: fixing XDP for fully checksummed packets handling
virtio_net: checksum offloading handling fix
...
|
|
There is a type 'enum operation_mode_e' contains the display modes of
the 'monitor' subcommand. This type isn't used though, instead the
variable 'mode' is of a simple 'int' type.
Change 'mode' variable type from 'int' to 'enum operation_mode_e' in
order to improve compiler type checking.
Built and tested this with different monitor cmdline params. Everything
works as expected, that is nothing changed and no regressions encountered.
Signed-off-by: Roman Storozhenko <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Remove not supported '-v' parameter from the cpupower's 'monitor'
command description.
There is a '-v' parameter described in cpupower's 'monitor' command man
page. It isn't supported at the moment, and perhaps has never been
supported. When I run the monitor with this parameter I get the
following:
$ sudo LD_LIBRARY_PATH=lib64/ bin/cpupower monitor -v
monitor: invalid option -- 'v'
invalid or unknown argument
$ sudo LD_LIBRARY_PATH=lib64/ bin/cpupower monitor -V
monitor: invalid option -- 'V'
invalid or unknown argument
Signed-off-by: Roman Storozhenko <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
One may use tools/testing/selftests/drivers/net/virtio_net/config
for example for vng build command like this one:
$ vng -v -b -f tools/testing/selftests/drivers/net/virtio_net/config
In that case, the needed kernel config options are not turned on.
Add the missed kernel config options.
Reported-by: Jakub Kicinski <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Reported-by: Matthieu Baerts <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Fixes: ccfaed04db5e ("selftests: virtio_net: add initial tests")
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The p_align values in PT_LOAD were ignored for static PIE executables
(i.e. ET_DYN without PT_INTERP). This is because there is no way to
request a non-fixed mmap region with a specific alignment. ET_DYN with
PT_INTERP uses a separate base address (ELF_ET_DYN_BASE) and binfmt_elf
performs the ASLR itself, which means it can also apply alignment. For
the mmap region, the address selection happens deep within the vm_mmap()
implementation (when the requested address is 0).
The earlier attempt to implement this:
commit 9630f0d60fec ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE")
commit 925346c129da ("fs/binfmt_elf: fix PT_LOAD p_align values for loaders")
did not take into account the different base address origins, and were
eventually reverted:
aeb7923733d1 ("revert "fs/binfmt_elf: use PT_LOAD p_align values for static PIE"")
In order to get the correct alignment from an mmap base, binfmt_elf must
perform a 0-address load first, then tear down the mapping and perform
alignment on the resulting address. Since this is slightly more overhead,
only do this when it is needed (i.e. the alignment is not the default
ELF alignment). This does, however, have the benefit of being able to
use MAP_FIXED_NOREPLACE, to avoid potential collisions.
With this fixed, enable the static PIE self tests again.
Reported-by: H.J. Lu <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215275
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
After commit 4d1cd3b2c5c1 ("tools/testing/selftests/exec: fix link
error"), the load address alignment tests tried to build statically.
This was silently ignored in some cases. However, after attempting to
further fix the build by switching to "-static-pie", the test started
failing. This appears to be due to non-PT_INTERP ET_DYN execs ("static
PIE") not doing alignment correctly, which remains unfixed[1]. See commit
aeb7923733d1 ("revert "fs/binfmt_elf: use PT_LOAD p_align values for
static PIE"") for more details.
Provide rules to build both static and non-static PIE binaries, improve
debug reporting, and perform several test steps instead of a single
all-or-nothing test. However, do not actually enable static-pie tests;
alignment specification is only supported for ET_DYN with PT_INTERP
("regular PIE").
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215275 [1]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Unlike the list of isolated CPUs, it is not easy to programamatically
determine what sched domains are being created by the scheduler just
by examinng the data in various kernfs filesystems. The easiest way
to get this information is by enabling /sys/kernel/debug/sched/verbose
file to make those information displayed in the console. This is also
what the test_cpuset_prs.sh script is doing when the -v flag is given.
It is rather hard to fetch the data from the console and compare it to
the expected result. An easier way is to dump the expected sched-domain
information out to the console so that they can be visually compared
with the actual sched domain data. However, this have to be done manually
by visual inspection and so will only be done once in a while.
Moreover the preceding cpuset commits also change the cpuset behavior
requiring corresponding chanages in some test cases as well as new test
cases to test the newly added functionality.
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
The test robot reported two different problems when running the
test_cpuset_prs.sh test.
# ./test_cpuset_prs.sh: line 106: echo: write error: Input/output error
# :
# Effective cpus changed to 0-1,4-7 after test 4!
The write error is caused by writing to /dev/console. It looks like
some systems may not have /dev/console configured or in a writeable
state. Fix this by checking the existence of /dev/console before
attempting to write it.
After the completion of each test run, the script will check if the
cpuset state is reset back to the original state. That usually takes a
while to happen. The test script inserts some artificial delay to make
sure that the reset has completed. The current setting is about 80ms.
That may not be enough in some cases especially if the test system is
slow. Double it to 160ms to minimize the chance of this type of failure.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
this selftest is designed for evaluating the SRv6 End.DX6 behavior
used with netfilter(rpfilter), in this example, for implementing
IPv6 L3 VPN use cases.
Signed-off-by: Jianguo Wu <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
this selftest is designed for evaluating the SRv6 End.DX4 behavior
used with netfilter(rpfilter), in this example, for implementing
IPv4 L3 VPN use cases.
Signed-off-by: Jianguo Wu <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Netlink flags, although they don't have payload at the netlink level,
are represented as having "True" as value in pyroute2.
Without it, trying to add a flow with a flag-type action (e.g: pop_vlan)
fails with the following traceback:
Traceback (most recent call last):
File "[...]/ovs-dpctl.py", line 2498, in <module>
sys.exit(main(sys.argv))
^^^^^^^^^^^^^^
File "[...]/ovs-dpctl.py", line 2487, in main
ovsflow.add_flow(rep["dpifindex"], flow)
File "[...]/ovs-dpctl.py", line 2136, in add_flow
reply = self.nlm_request(
^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/nlsocket.py", line 822, in nlm_request
return tuple(self._genlm_request(*argv, **kwarg))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/generic/__init__.py", line 126, in
nlm_request
return tuple(super().nlm_request(*argv, **kwarg))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/nlsocket.py", line 1124, in nlm_request
self.put(msg, msg_type, msg_flags, msg_seq=msg_seq)
File "[...]/pyroute2/netlink/nlsocket.py", line 389, in put
self.sendto_gate(msg, addr)
File "[...]/pyroute2/netlink/nlsocket.py", line 1056, in sendto_gate
msg.encode()
File "[...]/pyroute2/netlink/__init__.py", line 1245, in encode
offset = self.encode_nlas(offset)
^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/__init__.py", line 1560, in encode_nlas
nla_instance.setvalue(cell[1])
File "[...]/pyroute2/netlink/__init__.py", line 1265, in setvalue
nlv.setvalue(nla_tuple[1])
~~~~~~~~~^^^
IndexError: list index out of range
Signed-off-by: Adrian Moreno <[email protected]>
Acked-by: Aaron Conole <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- filesystems: warn_unused_result warnings
- seccomp: format-zero-length warnings
- fchmodat2: clang build warnings due to-static-libasan
- openat2: clang build warnings due to static-libasan, LOCAL_HDRS
* tag 'linux_kselftest-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/fchmodat2: fix clang build failure due to -static-libasan
selftests/openat2: fix clang build failures: -static-libasan, LOCAL_HDRS
selftests: seccomp: fix format-zero-length warnings
selftests: filesystems: fix warn_unused_result build warnings
|
|
openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to
obtain the first character of $ns. Empirically, this is works with bash
but not dash. When run with dash these evaluate to an empty string and
printing an error to stdout.
# dash -c 'ns=client; echo "${ns:0:1}"' 2>error
# cat error
dash: 1: Bad substitution
# bash -c 'ns=client; echo "${ns:0:1}"' 2>error
c
# cat error
This leads to tests that neither pass nor fail.
F.e.
TEST: arp_ping [START]
adding sandbox 'test_arp_ping'
Adding DP/Bridge IF: sbx:test_arp_ping dp:arpping {, , }
create namespaces
./openvswitch.sh: 282: eval: Bad substitution
TEST: ct_connect_v4 [START]
adding sandbox 'test_ct_connect_v4'
Adding DP/Bridge IF: sbx:test_ct_connect_v4 dp:ct4 {, , }
./openvswitch.sh: 322: eval: Bad substitution
create namespaces
Resolve this by making openvswitch.sh a bash script.
Fixes: 918423fda910 ("selftests: openvswitch: add an initial flow programming case")
Signed-off-by: Simon Horman <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Enhance cpupower build process description with the information on
building and installing the utility to the user defined directories
as well as with the information on the way of running the utility from
the custom defined installation directory.
Signed-off-by: Roman Storozhenko <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Make "cpupower" building process more user friendly by adding 'help'
target to the main makefile. This target describes various build
and cleaning options available to the user.
Signed-off-by: Roman Storozhenko <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Replace a dead reference link to a turbo boost technology description with
a reference to a root page of the technology on the Intel site, and add
another one, describing power management technology, which includes short
description of the turbo boost.
Signed-off-by: Roman Storozhenko <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
It is important to have fixed (sub)test names in TAP, because these
names are used to identify them. If they are not fixed, tracking cannot
be done.
Some subtests from the userspace_pm selftest were using random numbers
in their names: the client and server address IDs from $RANDOM, and the
client port number randomly picked by the kernel when creating the
connection. These values have been replaced by 'client' and 'server'
words: that's even more helpful than showing random numbers. Note that
the addresses IDs are incremented and decremented in the test: +1 or -1
are then displayed in these cases.
Not to loose info that can be useful for debugging in case of issues,
these random numbers are now displayed at the beginning of the test.
Fixes: f589234e1af0 ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: [email protected]
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/20240614-upstream-net-20240614-selftests-mptcp-uspace-pm-fixed-test-names-v1-1-460ad3edb429@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Now that btf_parse_elf() handles .BTF.base section presence,
we need to ensure that resolve_btfids uses .BTF.base when present
rather than the vmlinux base BTF passed in via the -B option.
Detect .BTF.base section presence and unset the base BTF path
to ensure that BTF ELF parsing will do the right thing.
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Update btf_parse_elf() to check if .BTF.base section is present.
The logic is as follows:
if .BTF.base section exists:
distilled_base := btf_new(.BTF.base)
if distilled_base:
btf := btf_new(.BTF, .base_btf=distilled_base)
if base_btf:
btf_relocate(btf, base_btf)
else:
btf := btf_new(.BTF)
return btf
In other words:
- if .BTF.base section exists, load BTF from it and use it as a base
for .BTF load;
- if base_btf is specified and .BTF.base section exist, relocate newly
loaded .BTF against base_btf.
Signed-off-by: Eduard Zingerman <[email protected]>
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Ensure relocated BTF looks as expected; in this case identical to
original split BTF, with a few duplicate anonymous types added to
split BTF by the relocation process. Also add relocation tests
for edge cases like missing type in base BTF and multiple types
of the same name.
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Map distilled base BTF type ids referenced in split BTF and their
references to the base BTF passed in, and if the mapping succeeds,
reparent the split BTF to the base BTF.
Relocation is done by first verifying that distilled base BTF
only consists of named INT, FLOAT, ENUM, FWD, STRUCT and
UNION kinds; then we sort these to speed lookups. Once sorted,
the base BTF is iterated, and for each relevant kind we check
for an equivalent in distilled base BTF. When found, the
mapping from distilled -> base BTF id and string offset is recorded.
In establishing mappings, we need to ensure we check STRUCT/UNION
size when the STRUCT/UNION is embedded in a split BTF STRUCT/UNION,
and when duplicate names exist for the same STRUCT/UNION. Otherwise
size is ignored in matching STRUCT/UNIONs.
Once all mappings are established, we can update type ids
and string offsets in split BTF and reparent it to the new base.
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Test generation of split+distilled base BTF, ensuring that
- named base BTF STRUCTs and UNIONs are represented as 0-vlen sized
STRUCT/UNIONs
- named ENUM[64]s are represented as 0-vlen named ENUM[64]s
- anonymous struct/unions are represented in full in split BTF
- anonymous enums are represented in full in split BTF
- types unreferenced from split BTF are not present in distilled
base BTF
Also test that with vmlinux BTF and split BTF based upon it,
we only represent needed base types referenced from split BTF
in distilled base.
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
To support more robust split BTF, adding supplemental context for the
base BTF type ids that split BTF refers to is required. Without such
references, a simple shuffling of base BTF type ids (without any other
significant change) invalidates the split BTF. Here the attempt is made
to store additional context to make split BTF more robust.
This context comes in the form of distilled base BTF providing minimal
information (name and - in some cases - size) for base INTs, FLOATs,
STRUCTs, UNIONs, ENUMs and ENUM64s along with modified split BTF that
points at that base and contains any additional types needed (such as
TYPEDEF, PTR and anonymous STRUCT/UNION declarations). This
information constitutes the minimal BTF representation needed to
disambiguate or remove split BTF references to base BTF. The rules
are as follows:
- INT, FLOAT, FWD are recorded in full.
- if a named base BTF STRUCT or UNION is referred to from split BTF, it
will be encoded as a zero-member sized STRUCT/UNION (preserving
size for later relocation checks). Only base BTF STRUCT/UNIONs
that are either embedded in split BTF STRUCT/UNIONs or that have
multiple STRUCT/UNION instances of the same name will _need_ size
checks at relocation time, but as it is possible a different set of
types will be duplicates in the later to-be-resolved base BTF,
we preserve size information for all named STRUCT/UNIONs.
- if an ENUM[64] is named, a ENUM forward representation (an ENUM
with no values) of the same size is used.
- in all other cases, the type is added to the new split BTF.
Avoiding struct/union/enum/enum64 expansion is important to keep the
distilled base BTF representation to a minimum size.
When successful, new representations of the distilled base BTF and new
split BTF that refers to it are returned. Both need to be freed by the
caller.
So to take a simple example, with split BTF with a type referring
to "struct sk_buff", we will generate distilled base BTF with a
0-member STRUCT sk_buff of the appropriate size, and the split BTF
will refer to it instead.
Tools like pahole can utilize such split BTF to populate the .BTF
section (split BTF) and an additional .BTF.base section. Then
when the split BTF is loaded, the distilled base BTF can be used
to relocate split BTF to reference the current (and possibly changed)
base BTF.
So for example if "struct sk_buff" was id 502 when the split BTF was
originally generated, we can use the distilled base BTF to see that
id 502 refers to a "struct sk_buff" and replace instances of id 502
with the current (relocated) base BTF sk_buff type id.
Distilled base BTF is small; when building a kernel with all modules
using distilled base BTF as a test, overall module size grew by only
5.3Mb total across ~2700 modules.
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Mainly MM singleton fixes. And a couple of ocfs2 regression fixes"
* tag 'mm-hotfixes-stable-2024-06-17-11-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kcov: don't lose track of remote references during softirqs
mm: shmem: fix getting incorrect lruvec when replacing a shmem folio
mm/debug_vm_pgtable: drop RANDOM_ORVALUE trick
mm: fix possible OOB in numa_rebuild_large_mapping()
mm/migrate: fix kernel BUG at mm/compaction.c:2761!
selftests: mm: make map_fixed_noreplace test names stable
mm/memfd: add documentation for MFD_NOEXEC_SEAL MFD_EXEC
mm: mmap: allow for the maximum number of bits for randomizing mmap_base by default
gcov: add support for GCC 14
zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING
mm: huge_memory: fix misused mapping_large_folio_support() for anon folios
lib/alloc_tag: fix RCU imbalance in pgalloc_tag_get()
lib/alloc_tag: do not register sysctl interface when CONFIG_SYSCTL=n
MAINTAINERS: remove Lorenzo as vmalloc reviewer
Revert "mm: init_mlocked_on_free_v3"
mm/page_table_check: fix crash on ZONE_DEVICE
gcc: disable '-Warray-bounds' for gcc-9
ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger()
ocfs2: fix NULL pointer dereference in ocfs2_journal_dirty()
|
|
The CONFIG_CSD_LOCK_WAIT_DEBUG option enables debugging of hung
smp_call_function*() calls (e.g. when the target CPU gets stuck within
the callback function). Testing this option requires triggering such
hangs.
This patch adds an lkdtm test with a hung smp_call_function_single()
callback, which can be used to test CONFIG_CSD_LOCK_WAIT_DEBUG and NMI
backtraces (as CONFIG_CSD_LOCK_WAIT_DEBUG will attempt an NMI backtrace
of the hung target CPU).
On arm64 using pseudo-NMI, this looks like:
| # mount -t debugfs none /sys/kernel/debug/
| # echo SMP_CALL_LOCKUP > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry SMP_CALL_LOCKUP
| smp: csd: Detected non-responsive CSD lock (#1) on CPU#1, waiting 5000000176 ns for CPU#00 __lkdtm_SMP_CALL_LOCKUP+0x0/0x8(0x0).
| smp: csd: CSD lock (#1) handling this request.
| Sending NMI from CPU 1 to CPUs 0:
| NMI backtrace for cpu 0
| CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.9.0-rc4-00001-gfdfd281212ec #1
| Hardware name: linux,dummy-virt (DT)
| pstate: 60401005 (nZCv daif +PAN -UAO -TCO -DIT +SSBS BTYPE=--)
| pc : __lkdtm_SMP_CALL_LOCKUP+0x0/0x8
| lr : __flush_smp_call_function_queue+0x1b0/0x290
| sp : ffff800080003f30
| pmr_save: 00000060
| x29: ffff800080003f30 x28: ffffa4ce961a4900 x27: 0000000000000000
| x26: fff000003fcfa0c0 x25: ffffa4ce961a4900 x24: ffffa4ce959aa140
| x23: ffffa4ce959aa140 x22: 0000000000000000 x21: ffff800080523c40
| x20: 0000000000000000 x19: 0000000000000000 x18: fff05b31aa323000
| x17: fff05b31aa323000 x16: ffff800080000000 x15: 0000330fc3fe6b2c
| x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000279
| x11: 0000000000000040 x10: fff000000302d0a8 x9 : fff000000302d0a0
| x8 : fff0000003400270 x7 : 0000000000000000 x6 : ffffa4ce9451b810
| x5 : 0000000000000000 x4 : fff05b31aa323000 x3 : ffff800080003f30
| x2 : fff05b31aa323000 x1 : ffffa4ce959aa140 x0 : 0000000000000000
| Call trace:
| __lkdtm_SMP_CALL_LOCKUP+0x0/0x8
| generic_smp_call_function_single_interrupt+0x14/0x20
| ipi_handler+0xb8/0x178
| handle_percpu_devid_irq+0x84/0x130
| generic_handle_domain_irq+0x2c/0x44
| gic_handle_irq+0x118/0x240
| call_on_irq_stack+0x24/0x4c
| do_interrupt_handler+0x80/0x84
| el1_interrupt+0x44/0xc0
| el1h_64_irq_handler+0x18/0x24
| el1h_64_irq+0x78/0x7c
| default_idle_call+0x40/0x60
| do_idle+0x23c/0x2d0
| cpu_startup_entry+0x38/0x3c
| kernel_init+0x0/0x1d8
| start_kernel+0x51c/0x608
| __primary_switched+0x80/0x88
| CPU: 1 PID: 128 Comm: sh Not tainted 6.9.0-rc4-00001-gfdfd281212ec #1
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x90/0xe8
| show_stack+0x18/0x24
| dump_stack_lvl+0xac/0xe8
| dump_stack+0x18/0x24
| csd_lock_wait_toolong+0x268/0x338
| smp_call_function_single+0x1dc/0x2f0
| lkdtm_SMP_CALL_LOCKUP+0xcc/0xfc
| lkdtm_do_action+0x1c/0x38
| direct_entry+0xbc/0x14c
| full_proxy_write+0x60/0xb4
| vfs_write+0xd0/0x35c
| ksys_write+0x70/0x104
| __arm64_sys_write+0x1c/0x28
| invoke_syscall+0x48/0x114
| el0_svc_common.constprop.0+0x40/0xe0
| do_el0_svc+0x1c/0x28
| el0_svc+0x38/0x108
| el0t_64_sync_handler+0x120/0x12c
| el0t_64_sync+0x1a4/0x1a8
| smp: csd: Continued non-responsive CSD lock (#1) on CPU#1, waiting 10000064272 ns for CPU#00 __lkdtm_SMP_CALL_LOCKUP+0x0/0x8(0x0).
| smp: csd: CSD lock (#1) handling this request.
| smp: csd: Continued non-responsive CSD lock (#1) on CPU#1, waiting 15000064384 ns for CPU#00 __lkdtm_SMP_CALL_LOCKUP+0x0/0x8(0x0).
| smp: csd: CSD lock (#1) handling this request.
Signed-off-by: Mark Rutland <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Cc: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
- Some cosmetic changes for hv.c and balloon.c (Aditya Nagesh)
- Two documentation updates (Michael Kelley)
- Suppress the invalid warning for packed member alignment (Saurabh
Sengar)
- Two hv_balloon fixes (Michael Kelley)
* tag 'hyperv-fixes-signed-20240616' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Cosmetic changes for hv.c and balloon.c
Documentation: hyperv: Improve synic and interrupt handling description
Documentation: hyperv: Update spelling and fix typo
tools: hv: suppress the invalid warning for packed member alignment
hv_balloon: Enable hot-add for memblock sizes > 128 MiB
hv_balloon: Use kernel macros to simplify open coded sequences
|
|
Add three unit tests in verifier_movsx.c to cover
cases where missed var_off setting can cause
unexpected verification success or failure.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
KTAP parsers interpret the output of ksft_test_result_*() as being the
name of the test. The map_fixed_noreplace test uses a dynamically
allocated base address for the mmap()s that it tests and currently
includes this in the test names that it logs so the test names that are
logged are not stable between runs. It also uses multiples of PAGE_SIZE
which mean that runs for kernels with different PAGE_SIZE configurations
can't be directly compared. Both these factors cause issues for CI
systems when interpreting and displaying results.
Fix this by replacing the current test names with fixed strings describing
the intent of the mappings that are logged, the existing messages with the
actual addresses and sizes are retained as diagnostic prints to aid in
debugging.
Link: https://lkml.kernel.org/r/20240605-kselftest-mm-fixed-noreplace-v1-1-a235db8b9be9@kernel.org
Fixes: 4838cf70e539 ("selftests/mm: map_fixed_noreplace: conform test to TAP format output")
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Ryan Roberts <[email protected]>
Cc: Muhammad Usama Anjum <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add cases to check minimum and maximum MTU which are exposed via
"ip -d link show". Test configuration and traffic. Use VLAN devices as
usually VLAN header (4 bytes) is not included in the MTU, and drivers
should configure hardware correctly to send maximum MTU payload size
in VLAN tagged packets.
$ ./min_max_mtu.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: Test maximum MTU configuration [ OK ]
TEST: Test traffic, packet size is maximum MTU [ OK ]
TEST: Test minimum MTU configuration [ OK ]
TEST: Test traffic, packet size is minimum MTU [ OK ]
Signed-off-by: Amit Cohen <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/89de8be8989db7a97f3b39e3c9da695673e78d2e.1718275854.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-14
We've added 8 non-merge commits during the last 2 day(s) which contain
a total of 9 files changed, 92 insertions(+), 11 deletions(-).
The main changes are:
1) Silence a syzkaller splat under CONFIG_DEBUG_NET=y in pskb_pull_reason()
triggered via __bpf_try_make_writable(), from Florian Westphal.
2) Fix removal of kfuncs during linking phase which then throws a kernel
build warning via resolve_btfids about unresolved symbols,
from Tony Ambardar.
3) Fix a UML x86_64 compilation failure from BPF as pcpu_hot symbol
is not available on User Mode Linux, from Maciej Żenczykowski.
4) Fix a register corruption in reg_set_min_max triggering an invariant
violation in BPF verifier, from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Harden __bpf_kfunc tag against linker kfunc removal
compiler_types.h: Define __retain for __attribute__((__retain__))
bpf: Avoid splat in pskb_pull_reason
bpf: fix UML x86_64 compile failure
selftests/bpf: Add test coverage for reg_set_min_max handling
bpf: Reduce stack consumption in check_stack_write_fixed_off
bpf: Fix reg_set_min_max corruption of fake_reg
MAINTAINERS: mailmap: Update Stanislav's email address
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Improve arena based tests and add several C and asm tests
with specific pattern.
These tests would have failed without add_const verifier support.
Also add several loop_inside_iter*() tests that are not related to add_const,
but nice to have.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add big endian support for can_loop/cond_break macros.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Compilers can generate the code
r1 = r2
r1 += 0x1
if r2 < 1000 goto ...
use knowledge of r2 range in subsequent r1 operations
So remember constant delta between r2 and r1 and update r1 after 'if' condition.
Unfortunately LLVM still uses this pattern for loops with 'can_loop' construct:
for (i = 0; i < 1000 && can_loop; i++)
The "undo" pass was introduced in LLVM
https://reviews.llvm.org/D121937
to prevent this optimization, but it cannot cover all cases.
Instead of fighting middle end optimizer in BPF backend teach the verifier
about this pattern.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
I got a weird verifier error with a subprog once, so let's have a test
for it.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
We drop the need for the attach() bpf syscall, but we need to set up
the hid_id field before calling __load().
The .bpf.c part is mechanical: we create one struct_ops per HID-BPF
program, as all the tests are for one program at a time.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Add special test to be sure that only __nullable BTF params can be
replaced by NULL. This patch adds fake kfuncs in bpf_testmod to
properly test different params.
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Vadim Fedorenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The bench shows some improvements, around 4% faster on decrypt.
Before:
Benchmark 'crypto-decrypt' started.
Iter 0 (325.719us): hits 5.105M/s ( 5.105M/prod), drops 0.000M/s, total operations 5.105M/s
Iter 1 (-17.295us): hits 5.224M/s ( 5.224M/prod), drops 0.000M/s, total operations 5.224M/s
Iter 2 ( 5.504us): hits 4.630M/s ( 4.630M/prod), drops 0.000M/s, total operations 4.630M/s
Iter 3 ( 9.239us): hits 5.148M/s ( 5.148M/prod), drops 0.000M/s, total operations 5.148M/s
Iter 4 ( 37.885us): hits 5.198M/s ( 5.198M/prod), drops 0.000M/s, total operations 5.198M/s
Iter 5 (-53.282us): hits 5.167M/s ( 5.167M/prod), drops 0.000M/s, total operations 5.167M/s
Iter 6 (-17.809us): hits 5.186M/s ( 5.186M/prod), drops 0.000M/s, total operations 5.186M/s
Summary: hits 5.092 ± 0.228M/s ( 5.092M/prod), drops 0.000 ±0.000M/s, total operations 5.092 ± 0.228M/s
After:
Benchmark 'crypto-decrypt' started.
Iter 0 (268.912us): hits 5.312M/s ( 5.312M/prod), drops 0.000M/s, total operations 5.312M/s
Iter 1 (124.869us): hits 5.354M/s ( 5.354M/prod), drops 0.000M/s, total operations 5.354M/s
Iter 2 (-36.801us): hits 5.334M/s ( 5.334M/prod), drops 0.000M/s, total operations 5.334M/s
Iter 3 (254.628us): hits 5.334M/s ( 5.334M/prod), drops 0.000M/s, total operations 5.334M/s
Iter 4 (-77.691us): hits 5.275M/s ( 5.275M/prod), drops 0.000M/s, total operations 5.275M/s
Iter 5 (-164.510us): hits 5.313M/s ( 5.313M/prod), drops 0.000M/s, total operations 5.313M/s
Iter 6 (-81.376us): hits 5.346M/s ( 5.346M/prod), drops 0.000M/s, total operations 5.346M/s
Summary: hits 5.326 ± 0.029M/s ( 5.326M/prod), drops 0.000 ±0.000M/s, total operations 5.326 ± 0.029M/s
Reviewed-by: Eduard Zingerman <[email protected]>
Signed-off-by: Vadim Fedorenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adjust selftests to use nullable option for state and IV arg.
Reviewed-by: Eduard Zingerman <[email protected]>
Signed-off-by: Vadim Fedorenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts, no adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When selftests are built with a new enough clang, the arena selftests
opt-in to use LLVM address_space attribute annotations for arena
pointers.
These annotations are not emitted by kfunc prototype generation. This
causes compilation errors when clang sees conflicting prototypes.
Fix by opting arena selftests out of using generated kfunc prototypes.
Fixes: 770abbb5a25a ("bpftool: Support dumping kfunc prototypes from BTF")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Daniel Xu <[email protected]>
Link: https://lore.kernel.org/r/fc59a617439ceea9ad8dfbb4786843c2169496ae.1718295425.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a test case for the jmp32/k fix to ensure selftests have coverage.
Before fix:
# ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k
[...]
./test_progs -t verifier_or_jmp32_k
tester_init:PASS:tester_log_buf 0 nsec
process_subtest:PASS:obj_open_mem 0 nsec
process_subtest:PASS:specs_alloc 0 nsec
run_subtest:PASS:obj_open_mem 0 nsec
run_subtest:FAIL:unexpected_load_success unexpected success: 0
#492/1 verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:FAIL
#492 verifier_or_jmp32_k:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
After fix:
# ./vmtest.sh -- ./test_progs -t verifier_or_jmp32_k
[...]
./test_progs -t verifier_or_jmp32_k
#492/1 verifier_or_jmp32_k/or_jmp32_k: bit ops + branch on unknown value:OK
#492 verifier_or_jmp32_k:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Slim pickings this time, probably a combination of summer, DevConf.cz,
and the end of first half of the year at corporations.
Current release - regressions:
- Revert "igc: fix a log entry using uninitialized netdev", it traded
lack of netdev name in a printk() for a crash
Previous releases - regressions:
- Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
- geneve: fix incorrectly setting lengths of inner headers in the
skb, confusing the drivers and causing mangled packets
- sched: initialize noop_qdisc owner to avoid false-positive
recursion detection (recursing on CPU 0), which bubbles up to user
space as a sendmsg() error, while noop_qdisc should silently drop
- netdevsim: fix backwards compatibility in nsim_get_iflink()
Previous releases - always broken:
- netfilter: ipset: fix race between namespace cleanup and gc in the
list:set type"
* tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
af_unix: Read with MSG_PEEK loops if the first unread byte is OOB
bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response
gve: Clear napi->skb before dev_kfree_skb_any()
ionic: fix use after netif_napi_del()
Revert "igc: fix a log entry using uninitialized netdev"
net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
net/ipv6: Fix the RT cache flush via sysctl using a previous delay
net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters
gve: ignore nonrelevant GSO type bits when processing TSO headers
net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP
netfilter: Use flowlabel flow key when re-routing mangled packets
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
netfilter: nft_inner: validate mandatory meta and payload
tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
mailmap: map Geliang's new email address
mptcp: pm: update add_addr counters after connect
mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID
mptcp: ensure snd_una is properly initialized on connect
...
|
|
Adjust skb program test to run with checksum validation.
Signed-off-by: Vadim Fedorenko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add special flag to validate that TC BPF program properly updates
checksum information in skb.
Signed-off-by: Vadim Fedorenko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
There are two spelling mistakes in some error messages. Fix them.
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Add a selftest that exercises the sysctl added in the previous patches.
Test that set/get works as expected; that across seeds we eventually hit
all NHs (test_mpath_seed_*); and that a given seed keeps hitting the same
NHs even across seed changes (test_mpath_seed_stability_*).
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In order to be able to save the current value of a sysctl without changing
it, split the relevant bit out of sysctl_set() into a new helper.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch enables dumping kfunc prototypes from bpftool. This is useful
b/c with this patch, end users will no longer have to manually define
kfunc prototypes. For the kernel tree, this also means we can optionally
drop kfunc prototypes from:
tools/testing/selftests/bpf/bpf_kfuncs.h
tools/testing/selftests/bpf/bpf_experimental.h
Example usage:
$ make PAHOLE=/home/dxu/dev/pahole/build/pahole -j30 vmlinux
$ ./tools/bpf/bpftool/bpftool btf dump file ./vmlinux format c | rg "__ksym;" | head -3
extern void cgroup_rstat_updated(struct cgroup *cgrp, int cpu) __weak __ksym;
extern void cgroup_rstat_flush(struct cgroup *cgrp) __weak __ksym;
extern struct bpf_key *bpf_lookup_user_key(u32 serial, u64 flags) __weak __ksym;
Signed-off-by: Daniel Xu <[email protected]>
Link: https://lore.kernel.org/r/bf6c08f9263c4bd9d10a717de95199d766a13f61.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <[email protected]>
|