| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is a selftest that checks for an (expected) error when an
invalid AR is specified, but not one that exercises the AR path.
Add a simple test that mirrors the vanilla write/read test while
providing an AR. An AR that contains zero will direct the CPU to
use the primary address space normally used anyway. AR[1] is
selected for this test because the host AR[1] is usually non-zero,
and KVM needs to correctly swap those values.
Reviewed-by: Nina Schoetterl-Glausch <[email protected]>
Acked-by: Christian Borntraeger <[email protected]>
Signed-off-by: Eric Farman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Carstens <[email protected]>
|
|
If the relevant capability (KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA) is present
then re-map vcpu_info using the HVA part way through the tests to make sure
then there is no functional change.
Signed-off-by: Paul Durrant <[email protected]>
Reviewed-by: David Woodhouse <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Using the HVA of the shared_info page is more efficient, so if the
capability (KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA) is present use that method
to do the mapping.
NOTE: Have the juggle_shinfo_state() thread map and unmap using both
GFN and HVA, to make sure the older mechanism is not broken.
Signed-off-by: Paul Durrant <[email protected]>
Reviewed-by: David Woodhouse <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
The config fragment doesn't follow the correct format to enable those
config options which make the config options getting missed while
merging with other configs.
➜ merge_config.sh -m .config tools/testing/selftests/iommu/config
Using .config as base
Merging tools/testing/selftests/iommu/config
➜ make olddefconfig
.config:5295:warning: unexpected data: CONFIG_IOMMUFD
.config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST
While at it, add CONFIG_FAULT_INJECTION as well which is needed for
CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base
config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.
Fixes: 57f0988706fe ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
When CONFIG_MCTP_FLOWS is enabled, outgoing skbs should have their
SKB_EXT_MCTP extension set for drivers to consume.
Add two tests for local-to-output routing that check for the flow
extensions: one for the simple single-packet case, and one for
fragmentation.
We now make MCTP_TEST select MCTP_FLOWS, so we always get coverage of
these flow tests. The tests are skippable if MCTP_FLOWS is (otherwise)
disabled, but that would need manual config tweaking.
Signed-off-by: Jeremy Kerr <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
No point in checking again as this was already done by the caller.
Signed-off-by: Nikolay Borisov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It's pointless checking if a particular part of an instruction is
decoded before calling the routine responsible for decoding it as this
check is duplicated in the routines itself. Streamline the code by
removing the superfluous checks. No functional difference.
Signed-off-by: Nikolay Borisov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-02-22
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).
The main changes are:
1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
page through bpf_probe_read_kernel and friends, from Hou Tao.
2) Fix a kernel panic due to uninitialized iter position pointer in
bpf_iter_task, from Yafang Shao.
3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
from Martin KaFai Lau.
4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
due to incorrect truesize accounting, from Sebastian Andrzej Siewior.
5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
from Shigeru Yoshida.
6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
resolved, from Hari Bathini.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
selftests/bpf: Add negtive test cases for task iter
bpf: Fix an issue due to uninitialized bpf_iter_task
selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
selftest/bpf: Test the read of vsyscall page under x86-64
x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
bpf, scripts: Correct GPL license name
xsk: Add truesize to skb_add_rx_frag().
bpf: Fix warning for bpf_cpumask in verifier
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
ioam6_parser uses a packet socket. After the fix to prevent writing to
cloned skb's, the receiver does not see its IOAM data anymore, which
makes input/forward ioam-selftests to fail. As a workaround,
ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to
get hop-by-hop options. As a consequence, the hook is "after" the IOAM
data insertion by the receiver and all tests are working again.
Signed-off-by: Justin Iurman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Make sure to free the already-parsed mcast_groups if
we don't get an ack from the kernel when reading family info.
This is part of the ynl_sock_create() error path, so we won't
get a call to ynl_sock_destroy() to free them later.
Fixes: 86878f14d71a ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There is one common error handler in ynl - ynl_cb_error().
It expects priv to be a pointer to struct ynl_parse_arg AKA yarg.
To avoid potential crashes if we encounter a stray NLMSG_ERROR
always pass yarg as priv (or a struct which has it as the first
member).
ynl_cb_null() has a similar problem directly - it expects yarg
but priv passed by the caller is ys.
Found by code inspection.
Fixes: 86878f14d71a ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Replace some goto statements with return statements so that unmap() is not
called on an undefined address. This change is made so that unmap() can
only be reached after mmap() is called (and the address mentioned is
defined). Returning MAP_FAILED seems acceptable since client code checks
for this value.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 42096aa24b82 ("selftest/mm: ksm_functional_tests: test in mmap_and_merge_range() if anything got merged")
Signed-off-by: JP Kobryn <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
If we queue 3 records:
- record 1, type DATA
- record 2, some other type
- record 3, type DATA
the current code can look past the 2nd record and merge the 2 data
records.
Signed-off-by: Sabrina Dubroca <[email protected]>
Link: https://lore.kernel.org/r/4623550f8617c239581030c13402d3262f2bd14f.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Two consecutive control messages of the same type should never be
merged into one large received blob of data.
Signed-off-by: Sabrina Dubroca <[email protected]>
Link: https://lore.kernel.org/r/018f1633d5471684c65def5fe390de3b15c3d683.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The test of linking process creates several intermediate files.
Remove them once the build is over.
This reduces the number of files in selftests/bpf/ directory
from ~4400 to ~2600.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
While we have test coverage for the ptrace interface in our selftests
the current programs have a number of gaps. The testing is done per
regset so does not cover interactions and at no point do any of the
tests actually run the traced processes meaning that there is no
validation that anything we read or write corresponds to register values
the process actually sees. Let's add a new program which attempts to cover
these gaps.
Each test we do performs a single ptrace write. For each test we generate
some random initial register data in memory and then fork() and trace a
child. The child will load the generated data into the registers then
trigger a breakpoint. The parent waits for the breakpoint then reads the
entire child register state via ptrace, verifying that the values expected
were actually loaded by the child. It then does the write being tested
and resumes the child. Once resumed the child saves the register state
it sees to memory and executes another breakpoint. The parent uses
process_vm_readv() to get these values from the child and verifies that
the values were as expected before cleaning up the child.
We generate configurations with combinations of vector lengths and SVCR
values and then try every ptrace write which will implement the
transition we generated. In order to control execution time (especially
in emulation) we only cover the minimum and maximum VL for each of SVE
and SME, this will ensure we generate both increasing and decreasing
changes in vector length. In order to provide a baseline test we also
check the case where we resume the child without doing a ptrace write.
In order to simplify the generation of the test count for kselftest we
will report but skip a substantial number of tests that can't actually
be expressed via a single ptrace write, several times more than we
actually run. This is noisy and will add some overhead but is very much
simpler so is probably worth the tradeoff.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Although the fixed counter 3 and its exclusive pseudo slots event are
not supported by KVM yet, the architectural slots event is supported by
KVM and can be programmed on any GP counter. Thus add validation for this
architectural slots event.
Top-down slots event "counts the total number of available slots for an
unhalted logical processor, and increments by machine-width of the
narrowest pipeline as employed by the Top-down Microarchitecture
Analysis method."
As for the slot, it's an abstract concept which indicates how many
uops (decoded from instructions) can be processed simultaneously
(per cycle) on HW. In Top-down Microarchitecture Analysis (TMA) method,
the processor is divided into two parts, frond-end and back-end. Assume
there is a processor with classic 5-stage pipeline, fetch, decode,
execute, memory access and register writeback. The former 2 stages
(fetch/decode) are classified to frond-end and the latter 3 stages are
classified to back-end.
In modern Intel processors, a complicated instruction would be decoded
into several uops (micro-operations) and so these uops can be processed
simultaneously and then improve the performance. Thus, assume a
processor can decode and dispatch 4 uops in front-end and execute 4 uops
in back-end simultaneously (per-cycle), so the machine-width of this
processor is 4 and this processor has 4 topdown slots per-cycle.
If a slot is spare and can be used to process a new upcoming uop, then
the slot is available, but if a uop occupies a slot for several cycles
and can't be retired (maybe blocked by memory access), then this slot is
stall and unavailable.
Considering the testing instruction sequence can't be macro-fused on x86
platforms, the measured slots count should not be less than
NUM_INSNS_RETIRED. Thus assert the slots count against NUM_INSNS_RETIRED.
pmu_counters_test passed with this patch on Intel Sapphire Rapids.
About the more information about TMA method, please refer the below link.
https://www.intel.com/content/www/us/en/docs/vtune-profiler/cookbook/2023-0/top-down-microarchitecture-analysis-method.html
Signed-off-by: Dapeng Mi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The second "new features" pull request for v6.9. Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.
We also twice merged wireless into wireless-next to avoid conflicts
between the trees.
Major changes:
stack
* mac80211: negotiated TTLM request support
* SPP A-MSDU support
* mac80211: wider bandwidth OFDMA config support
iwlwifi
* kunit tests
* bump FW API to 89 for AX/BZ/SC devices
* enable SPP A-MSDUs
* support for new devices
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)
rtl8xxxu
* TP-Link TL-WN823N V2 support
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
On a 8-socket server the TSC is wrongly marked as 'unstable' and disabled
during boot time on about one out of 120 boot attempts:
clocksource: timekeeping watchdog on CPU227: wd-tsc-wd excessive read-back delay of 153560ns vs. limit of 125000ns,
wd-wd read-back delay only 11440ns, attempt 3, marking tsc unstable
tsc: Marking TSC unstable due to clocksource watchdog
TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
sched_clock: Marking unstable (119294969739, 159204297)<-(125446229205, -5992055152)
clocksource: Checking clocksource tsc synchronization from CPU 319 to CPUs 0,99,136,180,210,542,601,896.
clocksource: Switched to clocksource hpet
The reason is that for platform with a large number of CPUs, there are
sporadic big or huge read latencies while reading the watchog/clocksource
during boot or when system is under stress work load, and the frequency and
maximum value of the latency goes up with the number of online CPUs.
The cCurrent code already has logic to detect and filter such high latency
case by reading the watchdog twice and checking the two deltas. Due to the
randomness of the latency, there is a low probabilty that the first delta
(latency) is big, but the second delta is small and looks valid. The
watchdog code retries the readouts by default twice, which is not
necessarily sufficient for systems with a large number of CPUs.
There is a command line parameter 'max_cswd_read_retries' which allows to
increase the number of retries, but that's not user friendly as it needs to
be tweaked per system. As the number of required retries is proportional to
the number of online CPUs, this parameter can be calculated at runtime.
Scale and enlarge the number of retries according to the number of online
CPUs and remove the command line parameter completely.
[ tglx: Massaged change log and comments ]
Signed-off-by: Feng Tang <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Jin Wang <[email protected]>
Tested-by: Paul E. McKenney <[email protected]>
Reviewed-by: Waiman Long <[email protected]>
Reviewed-by: Paul E. McKenney <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Pick up CXL CPER notification removal for v6.8-rc6, to return in a later
merge window.
|
|
Now perf can show assembly instructions with libcapstone for x86, and the
capstone is better in general.
Signed-off-by: Changbin Du <[email protected]>
Reviewed-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Cc: Thomas Richter <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Now '--insn-trace' accept a argument to specify the output format:
- raw: display raw instructions.
- disasm: display mnemonic instructions (if capstone is installed).
$ sudo perf script --insn-trace=raw
ls 1443864 [006] 2275506.209908875: 7f216b426100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: 48 89 e7
ls 1443864 [006] 2275506.209908875: 7f216b426103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: e8 e8 0c 00 00
ls 1443864 [006] 2275506.209908875: 7f216b426df0 _dl_start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: f3 0f 1e fa
$ sudo perf script --insn-trace=disasm
ls 1443864 [006] 2275506.209908875: 7f216b426100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) movq %rsp, %rdi
ls 1443864 [006] 2275506.209908875: 7f216b426103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) callq _dl_start+0x0
ls 1443864 [006] 2275506.209908875: 7f216b426df0 _dl_start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) illegal instruction
ls 1443864 [006] 2275506.209908875: 7f216b426df4 _dl_start+0x4 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) pushq %rbp
ls 1443864 [006] 2275506.209908875: 7f216b426df5 _dl_start+0x5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) movq %rsp, %rbp
ls 1443864 [006] 2275506.209908875: 7f216b426df8 _dl_start+0x8 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) pushq %r15
Signed-off-by: Changbin Du <[email protected]>
Reviewed-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Cc: Thomas Richter <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In addition to the 'insn' field, this adds a new field 'disasm' to
display mnemonic instructions instead of the raw code.
$ sudo perf script -F +disasm
perf-exec 1443864 [006] 2275506.209848: psb: psb offs: 0 0 [unknown] ([unknown])
perf-exec 1443864 [006] 2275506.209848: cbr: cbr: 41 freq: 4100 MHz (114%) 0 [unknown] ([unknown])
ls 1443864 [006] 2275506.209905: 1 branches:uH: 7f216b426100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) movq %rsp, %rdi
ls 1443864 [006] 2275506.209908: 1 branches:uH: 7f216b426103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) callq _dl_start+0x0
Signed-off-by: Changbin Du <[email protected]>
Reviewed-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Cc: Thomas Richter <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently, the instructions of samples are shown as raw hex strings
which are hard to read. x86 has a special option '--xed' to disassemble
the hex string via intel XED tool.
Here we use capstone as our disassembler engine to give more friendly
instructions. We select libcapstone because capstone can provide more
insn details. Perf will fallback to raw instructions if libcapstone is
not available.
The advantages compared to XED tool:
* Support arm, arm64, x86-32, x86_64 (more could be supported),
xed only for x86_64.
* Immediate address operands are shown as symbol+offs.
Signed-off-by: Changbin Du <[email protected]>
Reviewed-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Cc: Thomas Richter <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Later we will use libcapstone to disassemble instructions of samples.
Signed-off-by: Changbin Du <[email protected]>
Reviewed-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Cc: Thomas Richter <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There is a spelling mistake in a printed message. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
While mq_perf_tests runs with the default kselftest timeout limit, which
is 45 seconds, the test takes about 60 seconds to complete on i3.metal
AWS instances. Hence, the test always times out. Increase the timeout
to 180 seconds.
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Cc: <[email protected]> # 5.4.x
Signed-off-by: SeongJae Park <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add a test to exercize cpu hotplug with the function tracer active to
ensure that sensitive functions in idle path are excluded from being
traced. This helps catch issues such as the one fixed by commit
4b3338aaa74d ("powerpc/ftrace: Fix stack teardown in ftrace_no_trace").
Signed-off-by: Naveen N Rao <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Resolves a spelling error in the test log, preventing potential
confusion.
Signed-off-by: Vincenzo Mezzela <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The 'workload_hint_test' test generates an object with the same name,
but there is no .gitignore file in the directory to add the object as
stated in the selftest documentation.
Add the missing .gitignore file and include 'workload_hint_test'.
Signed-off-by: Javier Carrasco <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The 'power_floor' test generates an object with the same name,
but there is no .gitignore file in the directory to add the object as
stated in the selftest documentation.
Add the missing .gitignore file and include 'power_floor'.
Signed-off-by: Javier Carrasco <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The 'uevent_filtering' test generates an object with the same name,
but there is no .gitignore file in the directory to add the object
as stated in the selftest documentation.
Add the missing .gitignore file and include 'uevent_filtering'.
Signed-off-by: Javier Carrasco <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add a kselftest that verifies power supply properties from sysfs and
uevent. It checks whether they are present, readable and return valid
values.
This initial set of properties is not comprehensive, but rather the ones
that I was able to validate locally.
Co-developed-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Similar to the C counterpart, keep track of the number of test cases in
the test plan and add a helper function to be called at the end of the
test to print the results and exit with the corresponding exit code.
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Similar to the C counterpart, add a helper function to abort the
remainder of the test.
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Similar to the C counterpart, add a helper function that runs a command
and passes or fails the test based on the result.
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Similar to the C counterpart, add a helper to print a diagnostic
message.
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Move bash helpers for outputting in KTAP format to the common selftests
folder. This allows kselftests other than the dt one to source the file
and make use of the helper functions.
Define pass, fail and skip codes in the same file too.
Signed-off-by: Laura Nao <[email protected]>
Reviewed-by: Nícolas F. R. A. Prado <[email protected]>
Tested-by: Nícolas F. R. A. Prado <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
If HUGETLBFS is not enabled then the default_huge_page_size function will
return 0 and cause a divide by 0 error. Add a check to see if the huge page
size is 0 and skip the hugetlb tests if it is.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 16a45b57cbf2 ("selftests/mm: add framework for uffd-unit-test")
Signed-off-by: Terry Tritton <[email protected]>
Cc: Peter Griffin <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The typo in the description shows up in test logs and output.
This patch submission is part of my application to the Linux Foundation
mentorship program: Linux kernel Bug Fixing Spring Unpaid 2024.
Signed-off-by: Ali Zahraee <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Fix a typo in ftracetest script which is run when running the kselftests
for ftrace.
s/faii/fail
Signed-off-by: Kousik Sanagavarapu <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The futex_requeue_pi test program is run a number of times with different
options to provide multiple test cases. Currently every time it runs it
reports the result with a consistent string, meaning that automated systems
parsing the TAP output from a test run have difficulty in distinguishing
which test is which.
The parameters used for the test are already logged as part of the test
output, let's use the same format to roll them into the test name that we
use with KTAP so that automated systems can follow the results of the
individual cases that get run.
Signed-off-by: Mark Brown <[email protected]>
Acked-by: Davidlohr Bueso <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Incorporate a test case to assess the handling of invalid flags or
task__nullable parameters passed to bpf_iter_task_new(). Prior to the
preceding commit, this scenario could potentially trigger a kernel panic.
However, with the previous commit, this test case is expected to function
correctly.
Signed-off-by: Yafang Shao <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
bpf_timer_cancel
This selftest is based on a Alexei's test adopted from an internal
user to troubleshoot another bug. During this exercise, a separate
racing bug was discovered between bpf_timer_cancel_and_free
and bpf_timer_cancel. The details can be found in the previous
patch.
This patch is to add a selftest that can trigger the bug.
I can trigger the UAF everytime in my qemu setup with KASAN. The idea
is to have multiple user space threads running in a tight loop to exercise
both bpf_map_update_elem (which calls into bpf_timer_cancel_and_free)
and bpf_timer_cancel.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Hou Tao <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
If message contains unknown attribute and user passes
"--process-unknown" command line option, _decode() gets called with space
arg set to None. In that case, attr_space variable is not initialized
used which leads to following trace:
Traceback (most recent call last):
File "./tools/net/ynl/cli.py", line 77, in <module>
main()
File "./tools/net/ynl/cli.py", line 68, in main
reply = ynl.dump(args.dump, attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 909, in dump
return self._op(method, vals, [], dump=True)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 894, in _op
rsp_msg = self._decode(decoded.raw_attrs, op.attr_set.name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 639, in _decode
self._rsp_add(rsp, attr_name, None, self._decode_unknown(attr))
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 569, in _decode_unknown
return self._decode(NlAttrs(attr.raw), None)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 630, in _decode
search_attrs = SpaceAttrs(attr_space, rsp, outer_attrs)
^^^^^^^^^^
UnboundLocalError: cannot access local variable 'attr_space' where it is not associated with a value
Fix this by moving search_attrs assignment under the if statement
above it to make sure attr_space is initialized.
Fixes: bf8b832374fb ("tools/net/ynl: Support sub-messages in nested attribute spaces")
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In bond priority testing, we set the primary interface to eth1 and add
eth0,1,2 to bond in serial. This is OK in normal times. But when in
debug kernel, the bridge port that eth0,1,2 connected would start
slowly (enter blocking, forwarding state), which caused the primary
interface down for a while after enslaving and active slave changed.
Here is a test log from Jakub's debug test[1].
[ 400.399070][ T50] br0: port 1(s0) entered disabled state
[ 400.400168][ T50] br0: port 4(s2) entered disabled state
[ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one
[ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link
[ 400.943633][ T2766] br0: port 1(s0) entered blocking state
[ 400.944119][ T2766] br0: port 1(s0) entered forwarding state
[ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one
[ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link
[ 401.131643][ T69] br0: port 2(s1) entered blocking state
[ 401.132067][ T69] br0: port 2(s1) entered forwarding state
[ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link
[ 401.348414][ T50] br0: port 4(s2) entered blocking state
[ 401.348857][ T50] br0: port 4(s2) entered forwarding state
[ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave
[ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave
[ 401.526986][ T250] bond0: (slave eth2): making interface the new active one
[ 401.629470][ T250] bond0: (slave eth0): link status definitely up
[ 401.630089][ T250] bond0: (slave eth1): link status definitely up
[...]
# TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL]
# Current active slave is eth2 but not eth1
Fix it by setting active slave to primary slave specifically before
testing.
[1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout
Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests")
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Some 'cestab' subtests from the diag selftest had the same names, e.g.:
....chk 0 cestab
Now the previous value is taken, to have different names, e.g.:
....chk 2->0 cestab after flush
While at it, the 'after flush' info is added, similar to what is done
with the 'in use' subtests. Also inspired by these 'in use' subtests,
'many' is displayed instead of a large number:
many msk socket present [ ok ]
....chk many msk in use [ ok ]
....chk many cestab [ ok ]
....chk many->0 msk in use after flush [ ok ]
....chk many->0 cestab after flush [ ok ]
Fixes: 81ab772819da ("selftests: mptcp: diag: check CURRESTAB counters")
Cc: [email protected]
Reviewed-by: Geliang Tang <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Some 'in use' subtests from the diag selftest had the same names, e.g.:
chk 0 msk in use after flush
Now the previous value is taken, to have different names, e.g.:
chk 2->0 msk in use after flush
While at it, avoid repeating the full message, declare it once in the
helper.
Fixes: ce9902573652 ("selftests: mptcp: diag: format subtests results in TAP")
Cc: [email protected]
Reviewed-by: Geliang Tang <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated names.
Some subtests from the userspace_pm selftest had the same names. That's
because different subflows are created (and deleted) between the same
pair of IP addresses.
Simply adding the destination port in the name is then enough to have
different names, because the destination port is always different.
Note that adding such info takes a bit more space, so we need to
increase a bit the width to print the name, simply to keep all the
'[ OK ]' aligned as before.
Fixes: f589234e1af0 ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: [email protected]
Reviewed-by: Geliang Tang <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|