| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Some small parisc architecture fixes for 6.0-rc6:
One patch lightens up a previous commit and thus unbreaks building the
debian kernel, which tries to configure a 64-bit kernel with the
ARCH=parisc environment variable set.
The other patches fixes asm/errno.h includes in the tools directory
and cleans up memory allocation in the iosapic driver.
Summary:
- Allow configuring 64-bit kernel with ARCH=parisc
- Fix asm/errno.h includes in tools directory for parisc and xtensa
- Clean up iosapic memory allocation
- Minor typo and spelling fixes"
* tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Allow CONFIG_64BIT with ARCH=parisc
parisc: remove obsolete manual allocation aligning in iosapic
tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa
Input: hp_sdc: fix spelling typo in comment
parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
|
|
Test that the bonding and team drivers clean up an underlying device's
address lists (dev->uc, dev->mc) when the aggregated device is deleted.
Test addition and removal of the LACPDU multicast address on underlying
devices by the bonding driver.
v2:
* add lag_lib.sh to TEST_FILES
v3:
* extend bond_listen_lacpdu_multicast test to init_state up and down cases
* remove some superfluous shell syntax and 'set dev ... up' commands
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These changes simplify the Makefile and handle these 5 ways to build
Landlock tests:
- make -C tools/testing/selftests/landlock
- make -C tools/testing/selftests TARGETS=landlock gen_tar
- make TARGETS=landlock kselftest-gen_tar
- make TARGETS=landlock O=build kselftest-gen_tar
- make -C /tmp/linux TARGETS=landlock O=/tmp/build kselftest-gen_tar
This also makes $(KHDR_INCLUDES) available to other test collections
when building in their directory.
Fixes: f1227dc7d041 ("selftests/landlock: fix broken include of linux/landlock.h")
Fixes: 3bb267a36185 ("selftests: drop khdr make target")
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220909103402.1501802-1-mic@digikod.net
|
|
The next patch reverts the code that this test verified.
This reverts commit 6342140db6609a0c7d34f68c52b2947468e0e630.
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220913102551.1121611-2-avagin@google.com
|
|
tools/include/uapi/asm/errno.h currently attempts to include
non-existent arch-specific errno.h header for xtensa.
Remove this case so that <asm-generic/errno.h> is used instead,
and add the missing arch-specific header for parisc.
References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=ia64&ver=5.8.3-1%7Eexp1&stamp=1598340829&raw=1
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Cc: <stable@vger.kernel.org> # 5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix an error handling issue in DRM driver (Christophe JAILLET)
- Fix some issues in framebuffer driver (Vitaly Kuznetsov)
- Two typo fixes (Jason Wang, Shaomin Deng)
- Drop unnecessary casting in kvp tool (Zhou Jie)
* tag 'hyperv-fixes-signed-20220912' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region
Drivers: hv: Always reserve framebuffer region for Gen1 VMs
PCI: Move PCI_VENDOR_ID_MICROSOFT/PCI_DEVICE_ID_HYPERV_VIDEO definitions to pci_ids.h
tools: hv: kvp: remove unnecessary (void*) conversions
Drivers: hv: remove duplicate word in a comment
tools: hv: Remove an extraneous "the"
drm/hyperv: Fix an error handling path in hyperv_vmbus_probe()
|
|
When gfp_types.h was split from gfp.h, it broke the radix test suite. Fix
the test suite by using gfp_types.h in the tools gfp.h header.
Link: https://lkml.kernel.org/r/20220902191923.1735933-1-willy@infradead.org
Fixes: cb5a065b4ea9 (headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Two fixes to test build and a fix for incorrect taint reason reporting"
* tag 'linux-kselftest-kunit-fixes-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tools: Add new "test" taint to kernel-chktaint
kunit: fix Kconfig for build-in tests USB4 and Nitro Enclaves
kunit: fix assert_type for comparison macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix per-thread mmaps for multi-threaded targets, noticed with
'perf top --pid' with multithreaded targets
- Fix synthesis failure warnings in 'perf record'
- Fix L2 Topdown metrics disappearance for raw events in 'perf stat'
- Fix out of bound access in some CPU masks
- Fix segfault if there is no CPU PMU table and a metric is sought,
noticed when building with NO_JEVENTS=1
- Skip dummy event attr check in 'perf script' fixing nonsensical
warning about UREGS attribute not set, as 'dummy' events have no
samples
- Fix 'iregs' field handling with dummy events on hybrid systems in
'perf script'
- Prevent potential memory leak in c2c_he_zalloc() in 'perf c2c'
- Don't install data files with x permissions
- Fix types for print format in dlfilter-show-cycles
- Switch deprecated openssl MD5_* functions to new EVP API in 'genelf'
- Remove redundant word 'contention' in 'perf lock' help message
* tag 'perf-tools-fixes-for-v6.0-2022-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf record: Fix synthesis failure warnings
perf tools: Don't install data files with x permissions
perf script: Fix Cannot print 'iregs' field for hybrid systems
perf lock: Remove redundant word 'contention' in help message
perf dlfilter dlfilter-show-cycles: Fix types for print format
libperf evlist: Fix per-thread mmaps for multi-threaded targets
perf c2c: Prevent potential memory leak in c2c_he_zalloc()
perf genelf: Switch deprecated openssl MD5_* functions to new EVP API
tools/perf: Fix out of bound access to cpu mask array
perf affinity: Fix out of bound access to "sched_cpus" mask
perf stat: Fix L2 Topdown metrics disappear for raw events
perf script: Skip dummy event attr check
perf metric: Return early if no CPU PMU table exists
|
|
Florian Westhal says:
====================
netfilter: bugfixes for net
The following set contains four netfilter patches for your *net* tree.
When there are multiple Contact headers in a SIP message its possible
the next headers won't be found because the SIP helper confuses relative
and absolute offsets in the message. From Igor Ryzhov.
Make the nft_concat_range self-test support socat, this makes the
selftest pass on my test VM, from myself.
nf_conntrack_irc helper can be tricked into opening a local port forward
that the client never requested by embedding a DCC message in a PING
request sent to the client. Fix from David Leadbeater.
Both have been broken since the kernel 2.6.x days.
The 'osf' match might indicate success while it could not find
anything, broken since 5.2 . Fix from Pablo Neira.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some calls to synthesis functions set err < 0 but only warn about the
failure and continue. However they do not set err back to zero, relying
on subsequent code to do that.
That changed with the introduction of option --synth. When --synth=no
subsequent functions that set err back to zero are not called.
Fix by setting err = 0 in those cases.
Example:
Before:
$ perf record --no-bpf-event --synth=all -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
After:
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
Fixes: 41b740b6e8a994e5 ("perf record: Add --synth option")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220907162458.72817-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
install(1), by default, installs with rwxr-xr-x permissions. Modify
perf's Makefile to pass '-m 644' when installing:
* Documentation/tips.txt
* examples/bpf/*
* perf-completion.sh
* perf_dlfilter.h header
* scripts/perl/Perf-Trace-Util/lib/Perf/Trace/*
* scripts/perl/*.pl
* tests/attr/*
* tests/attr.py
* tests/shell/lib/*.sh
* trace/strace/groups/*
All those are supposed to be non-executable. Either they are not scripts
at all, or they don't have shebang.
Signed-off-by: <jslaby@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908060426.9619-1-jslaby@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid
systems to collect metadata records") adds a dummy event on hybrid
systems to fix the symbol "unknown" issue when the workload is created
in a P-core but runs on an E-core. The added dummy event will cause
"perf script -F iregs" to fail. Dummy events do not have "iregs"
attribute set, so when we do evsel__check_attr, the "iregs" attribute
check will fail, so the issue happened.
The following commit [1] has fixed a similar issue by skipping the attr
check for the dummy event because it does not have any samples anyway. It
works okay for the normal mode, but the issue still happened when running
the test in the pipe mode. In the pipe mode, it calls process_attr() which
still checks the attr for the dummy event. This commit fixed the issue by
skipping the attr check for the dummy event in the API evsel__check_attr,
Otherwise, we have to patch everywhere when evsel__check_attr() is called.
Before:
#./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
Samples for 'dummy:HG' event do not have IREGS attribute set. Cannot print 'iregs' field.
0x120 [0x90]: failed to process type: 64
#
After:
# ./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
ABI:2 CX:0x55b8efa87000 DX:0x55b8efa7e000 DI:0xffffba5e625efbb0 R8:0xffff90e51f8ae100
ABI:2 CX:0x7f1dae1e4000 DX:0xd0 DI:0xffff90e18c675ac0 R8:0x71
ABI:2 CX:0xcc0 DX:0x1 DI:0xffff90e199880240 R8:0x0
ABI:2 CX:0xffff90e180dd7500 DX:0xffff90e180dd7500 DI:0xffff90e180043500 R8:0x1
ABI:2 CX:0x50 DX:0xffff90e18c583bd0 DI:0xffff90e1998803c0 R8:0x58
#
[1]https://lore.kernel.org/lkml/20220831124041.219925-1-jolsa@kernel.org/
Fixes: b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid systems to collect metadata records")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908070030.3455164-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before:
# perf lock -h
Usage: perf lock [<options>] {record|report|script|info|contention|contention}
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
--kallsyms <file>
kallsyms pathname
--vmlinux <file> vmlinux pathname
After:
# perf lock -h
Usage: perf lock [<options>] {record|report|script|info|contention}
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
--kallsyms <file>
kallsyms pathname
--vmlinux <file> vmlinux pathname
Fixes: 528b9cab3b813a3b ("perf lock: Add 'contention' subcommand")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908014854.151203-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Avoid compiler warning about format %llu that expects long long unsigned
int but argument has type __u64.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: c3afd6e50fce824f ("perf dlfilter: Add dlfilter-show-cycles")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220905074735.4513-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The offending commit removed mmap_per_thread(), which did not consider
the different set-output rules for per-thread mmaps i.e. in the per-thread
case set-output is used for file descriptors of the same thread not the
same cpu.
This was not immediately noticed because it only happens with
multi-threaded targets and we do not have a test for that yet.
Reinstate mmap_per_thread() expanding it to cover also system-wide per-cpu
events i.e. to continue to allow the mixing of per-thread and per-cpu
mmaps.
Debug messages (with -vv) show the file descriptors that are opened with
sys_perf_event_open. New debug messages are added (needs -vvv) that show
also which file descriptors are mmapped and which are redirected with
set-output.
In the per-cpu case (cpu != -1) file descriptors for the same CPU are
set-output to the first file descriptor for that CPU.
In the per-thread case (cpu == -1) file descriptors for the same thread are
set-output to the first file descriptor for that thread.
Example (process 17489 has 2 threads):
Before (but with new debug prints):
$ perf record --no-bpf-event -vvv --per-thread -p 17489
<SNIP>
sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6
<SNIP>
libperf: idx 0: mmapping fd 5
libperf: idx 0: set output fd 6 -> 5
failed to mmap with 22 (Invalid argument)
After:
$ perf record --no-bpf-event -vvv --per-thread -p 17489
<SNIP>
sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6
<SNIP>
libperf: mmap_per_thread: nr cpu values (may include -1) 1 nr threads 2
libperf: idx 0: mmapping fd 5
libperf: idx 1: mmapping fd 6
<SNIP>
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (15 samples) ]
Per-cpu example (process 20341 has 2 threads, same as above):
$ perf record --no-bpf-event -vvv -p 20341
<SNIP>
sys_perf_event_open: pid 20341 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 20342 cpu 0 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid 20341 cpu 1 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid 20342 cpu 1 group_fd -1 flags 0x8 = 8
sys_perf_event_open: pid 20341 cpu 2 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid 20342 cpu 2 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid 20341 cpu 3 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid 20342 cpu 3 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid 20341 cpu 4 group_fd -1 flags 0x8 = 13
sys_perf_event_open: pid 20342 cpu 4 group_fd -1 flags 0x8 = 14
sys_perf_event_open: pid 20341 cpu 5 group_fd -1 flags 0x8 = 15
sys_perf_event_open: pid 20342 cpu 5 group_fd -1 flags 0x8 = 16
sys_perf_event_open: pid 20341 cpu 6 group_fd -1 flags 0x8 = 17
sys_perf_event_open: pid 20342 cpu 6 group_fd -1 flags 0x8 = 18
sys_perf_event_open: pid 20341 cpu 7 group_fd -1 flags 0x8 = 19
sys_perf_event_open: pid 20342 cpu 7 group_fd -1 flags 0x8 = 20
<SNIP>
libperf: mmap_per_cpu: nr cpu values 8 nr threads 2
libperf: idx 0: mmapping fd 5
libperf: idx 0: set output fd 6 -> 5
libperf: idx 1: mmapping fd 7
libperf: idx 1: set output fd 8 -> 7
libperf: idx 2: mmapping fd 9
libperf: idx 2: set output fd 10 -> 9
libperf: idx 3: mmapping fd 11
libperf: idx 3: set output fd 12 -> 11
libperf: idx 4: mmapping fd 13
libperf: idx 4: set output fd 14 -> 13
libperf: idx 5: mmapping fd 15
libperf: idx 5: set output fd 16 -> 15
libperf: idx 6: mmapping fd 17
libperf: idx 6: set output fd 18 -> 17
libperf: idx 7: mmapping fd 19
libperf: idx 7: set output fd 20 -> 19
<SNIP>
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (17 samples) ]
Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Reported-by: Tomáš Trnka <trnka@scm.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216441
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220905114209.8389-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter, wireless and bluetooth
subtrees.
Current release - regressions:
- skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
- bluetooth: fix regression preventing ACL packet transmission
Current release - new code bugs:
- dsa: microchip: fix kernel oops on ksz8 switches
- dsa: qca8k: fix NULL pointer dereference for
of_device_get_match_data
Previous releases - regressions:
- netfilter: clean up hook list when offload flags check fails
- wifi: mt76: fix crash in chip reset fail
- rxrpc: fix ICMP/ICMP6 error handling
- ice: fix DMA mappings leak
- i40e: fix kernel crash during module removal
Previous releases - always broken:
- ipv6: sr: fix out-of-bounds read when setting HMAC data.
- tcp: TX zerocopy should not sense pfmemalloc status
- sch_sfb: don't assume the skb is still around after
enqueueing to child
- netfilter: drop dst references before setting
- wifi: wilc1000: fix DMA on stack objects
- rxrpc: fix an insufficiently large sglist in
rxkad_verify_packet_2()
- fec: use a spinlock to guard `fep->ptp_clk_on`
Misc:
- usb: qmi_wwan: add Quectel RM520N"
* tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
sch_sfb: Also store skb len before calling child enqueue
net: phy: lan87xx: change interrupt src of link_up to comm_ready
net/smc: Fix possible access to freed memory in link clear
net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set
net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio
net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet
net: usb: qmi_wwan: add Quectel RM520N
net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
tcp: fix early ETIMEDOUT after spurious non-SACK RTO
stmmac: intel: Simplify intel_eth_pci_remove()
net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()
ipv6: sr: fix out-of-bounds read when setting HMAC data.
bonding: accept unsolicited NA message
bonding: add all node mcast address when slave up
bonding: use unspecified address if no available link local address
wifi: use struct_group to copy addresses
wifi: mac80211_hwsim: check length for virtio packets
...
|
|
Commit c272612cb4a2 ("kunit: Taint the kernel when KUnit tests are run")
added a new taint flag for when in-kernel tests run. This commit adds
recognition of this new flag in kernel-chktaint.
With this change the correct reason will be reported if the kernel is
tainted because of a test run.
Amended Commit log: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Joe Fradley <joefradley@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There are different flavors of 'nc' around, this script fails on
my test vm because 'nc' is 'nmap-ncat' which isn't 100% compatible.
Add socat support and use it if available.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Free allocated resources when zalloc() fails for members in c2c_he, to
prevent potential memory leak in c2c_he_zalloc().
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220906032906.21395-4-shangxiaojing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Switch to the flavored EVP API like in test-libcrypto.c, and remove the
bad gcc #pragma.
Inspired-by: 5b245985a6de5ac1 ("tools build: Switch to new openssl API for test-libcrypto")
Signed-off-by: Zixuan Tan <tanzixuan.me@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/CABwm_eTnARC1GwMD-JF176k8WXU1Z0+H190mvXn61yr369qt6g@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The cpu mask init code in "record__mmap_cpu_mask_init" function access
"bits" array part of "struct mmap_cpu_mask". The size of this array is
the value from cpu__max_cpu().cpu. This array is used to contain the
cpumask value for each cpu. While setting bit for each cpu, it calls
"set_bit" function which access index in "bits" array.
If we provide a command line option to -C which is greater than the
number of CPU's present in the system, the set_bit could access an array
member which is out-of the array size. This is because currently, there
is no boundary check for the CPU. This will result in seg fault:
<<>>
./perf record -C 12341234 ls
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Segmentation fault (core dumped)
<<>>
Debugging with gdb, points to function flow as below:
<<>>
set_bit
record__mmap_cpu_mask_init
record__init_thread_default_masks
record__init_thread_masks
cmd_record
<<>>
Fix this by adding boundary check for the array.
After the patch:
<<>>
./perf record -C 12341234 ls
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Failed to initialize parallel data streaming masks
<<>>
With this fix, if -C is given a non-exsiting CPU, perf
record will fail with:
<<>>
./perf record -C 50 ls
Failed to initialize parallel data streaming masks
<<>>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220905141929.7171-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The affinity code in "affinity_set" function access array named
"sched_cpus". The size for this array is allocated in affinity_setup
function which is nothing but value from get_cpu_set_size. This is used
to contain the cpumask value for each cpu.
While setting bit for each cpu, it calls "set_bit" function which access
index in sched_cpus array. If we provide a command-line option to -C
which is more than the number of CPU's present in the system, the
set_bit could access an array member which is out-of the array size.
This is because currently, there is no boundary check for the CPU. This
will result in seg fault:
<<>>
./perf stat -C 12323431 ls
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Segmentation fault (core dumped)
<<>>
Fix this by adding boundary check for the array.
After the fix from powerpc system:
<<>>
./perf stat -C 12323431 ls 1>out
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Performance counter stats for 'CPU(s) 12323431':
<not supported> msec cpu-clock
<not supported> context-switches
<not supported> cpu-migrations
<not supported> page-faults
<not supported> cycles
<not supported> instructions
<not supported> branches
<not supported> branch-misses
0.001192373 seconds time elapsed
<<>>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220905141929.7171-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Remove unnecessary void* type casting.
Signed-off-by: Zhou jie <zhoujie@nfschina.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220823034552.8596-1-zhoujie@nfschina.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"s390:
- PCI interpretation compile fixes
RISC-V:
- fix unused variable warnings in vcpu_timer.c
- move extern sbi_ext declarations to a header
x86:
- check validity of argument to KVM_SET_MP_STATE
- use guest's global_ctrl to completely disable guest PEBS
- fix a memory leak on memory allocation failure
- mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES
- fix build failure with Clang integrated assembler
- fix MSR interception
- always flush TLBs when enabling dirty logging"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: check validity of argument to KVM_SET_MP_STATE
perf/x86/core: Completely disable guest PEBS via guest's global_ctrl
KVM: x86: fix memoryleak in kvm_arch_vcpu_create()
KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES
KVM: s390: pci: Hook to access KVM lowlevel from VFIO
riscv: kvm: move extern sbi_ext declarations to a header
riscv: kvm: vcpu_timer: fix unused variable warnings
KVM: selftests: Fix ambiguous mov in KVM_ASM_SAFE()
KVM: selftests: Fix KVM_EXCEPTION_MAGIC build with Clang
KVM: VMX: Heed the 'msr' argument in msr_write_intercepted()
kvm: x86: mmu: Always flush TLBs when enabling dirty logging
kvm: x86: mmu: Drop the need_remote_flush() function
|
|
The initialization is unnecessary, because ret is always assigned a new
value before reading it.
Signed-off-by: Shi junming <junming@nfschina.com>
[ rjw: Subject edits, new changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Florian Westphal says:
====================
netfilter: bug fixes for net
1. Fix IP address check in irc DCC conntrack helper, this should check
the opposite direction rather than the destination address of the
packets' direction, from David Leadbeater.
2. bridge netfilter needs to drop dst references, from Harsh Modi.
This was fine back in the day the code was originally written,
but nowadays various tunnels can pre-set metadata dsts on packets.
3. Remove nf_conntrack_helper sysctl and the modparam toggle, users
need to explicitily assign the helpers to use via nftables or
iptables. Conntrack helpers, by design, may be used to add dynamic
port redirections to internal machines, so its necessary to restrict
which hosts/peers are allowed to use them.
It was discovered that improper checking in the irc DCC helper makes
it possible to trigger the 'please do dynamic port forward'
from outside by embedding a 'DCC' in a PING request; if the client
echos that back a expectation/port forward gets added.
The auto-assign-for-everything mechanism has been in "please don't do this"
territory since 2012. From Pablo.
4. Fix a memory leak in the netdev hook error unwind path, also from Pablo.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack_irc: Fix forged IP logic
netfilter: nf_tables: clean up hook list when offload flags check fails
netfilter: br_netfilter: Drop dst references before setting.
netfilter: remove nf_conntrack_helper sysctl and modparam toggles
====================
Link: https://lore.kernel.org/r/20220901071238.3044-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull io_uring fixes from Jens Axboe:
- A single fix for over-eager retries for networking (Pavel)
- Revert the notification slot support for zerocopy sends.
It turns out that even after more than a year or development and
testing, there's not full agreement on whether just using plain
ordered notifications is Good Enough to avoid the complexity of using
the notifications slots. Because of that, we decided that it's best
left to a future final decision.
We can always bring back this feature, but we can't really change it
or remove it once we've released 6.0 with it enabled. The reverts
leave the usual CQE notifications as the primary interface for
knowing when data was sent, and when it was acked. (Pavel)
* tag 'io_uring-6.0-2022-09-02' of git://git.kernel.dk/linux-block:
selftests/net: return back io_uring zc send tests
io_uring/net: simplify zerocopy send user API
io_uring/notif: remove notif registration
Revert "io_uring: rename IORING_OP_FILES_UPDATE"
Revert "io_uring: add zc notification flush requests"
selftests/net: temporarily disable io_uring zc test
io_uring/net: fix overexcessive retries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"This fixes a mis-handling of the LANDLOCK_ACCESS_FS_REFER right when
multiple rulesets/domains are stacked.
The expected behaviour was that an additional ruleset can only
restrict the set of permitted operations, but in this particular case,
it was potentially possible to re-gain the LANDLOCK_ACCESS_FS_REFER
right"
* tag 'landlock-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix file reparenting without explicit LANDLOCK_ACCESS_FS_REFER
|
|
In perf/Documentation/perf-stat.txt, for "--td-level" the default "0" means
the max level that the current hardware support.
So we need initialize the stat_config.topdown_level to TOPDOWN_MAX_LEVEL
when “--td-level=0” or no “--td-level” option. Otherwise, for the
hardware with a max level is 2, the 2nd level metrics disappear for raw
events in this case.
The issue cannot be observed for the perf stat default or "--topdown"
options. This commit fixes the raw events issue and removes the
duplicated code for the perf stat default.
Before:
# ./perf stat -e "cpu-clock,context-switches,cpu-migrations,page-faults,instructions,cycles,ref-cycles,branches,branch-misses,{slots,topdown-retiring,topdown-bad-spec,topdown-fe-bound,topdown-be-bound,topdown-heavy-ops,topdown-br-mispredict,topdown-fetch-lat,topdown-mem-bound}" sleep 1
Performance counter stats for 'sleep 1':
1.03 msec cpu-clock # 0.001 CPUs utilized
1 context-switches # 966.216 /sec
0 cpu-migrations # 0.000 /sec
60 page-faults # 57.973 K/sec
1,132,112 instructions # 1.41 insn per cycle
803,872 cycles # 0.777 GHz
1,909,120 ref-cycles # 1.845 G/sec
236,634 branches # 228.640 M/sec
6,367 branch-misses # 2.69% of all branches
4,823,232 slots # 4.660 G/sec
1,210,536 topdown-retiring # 25.1% Retiring
699,841 topdown-bad-spec # 14.5% Bad Speculation
1,777,975 topdown-fe-bound # 36.9% Frontend Bound
1,134,878 topdown-be-bound # 23.5% Backend Bound
189,146 topdown-heavy-ops # 182.756 M/sec
662,012 topdown-br-mispredict # 639.647 M/sec
1,097,048 topdown-fetch-lat # 1.060 G/sec
416,121 topdown-mem-bound # 402.063 M/sec
1.002423690 seconds time elapsed
0.002494000 seconds user
0.000000000 seconds sys
After:
# ./perf stat -e "cpu-clock,context-switches,cpu-migrations,page-faults,instructions,cycles,ref-cycles,branches,branch-misses,{slots,topdown-retiring,topdown-bad-spec,topdown-fe-bound,topdown-be-bound,topdown-heavy-ops,topdown-br-mispredict,topdown-fetch-lat,topdown-mem-bound}" sleep 1
Performance counter stats for 'sleep 1':
1.13 msec cpu-clock # 0.001 CPUs utilized
1 context-switches # 882.128 /sec
0 cpu-migrations # 0.000 /sec
61 page-faults # 53.810 K/sec
1,137,612 instructions # 1.29 insn per cycle
881,477 cycles # 0.778 GHz
2,093,496 ref-cycles # 1.847 G/sec
236,356 branches # 208.496 M/sec
7,090 branch-misses # 3.00% of all branches
5,288,862 slots # 4.665 G/sec
1,223,697 topdown-retiring # 23.1% Retiring
767,403 topdown-bad-spec # 14.5% Bad Speculation
2,053,322 topdown-fe-bound # 38.8% Frontend Bound
1,244,438 topdown-be-bound # 23.5% Backend Bound
186,665 topdown-heavy-ops # 3.5% Heavy Operations # 19.6% Light Operations
725,922 topdown-br-mispredict # 13.7% Branch Mispredict # 0.8% Machine Clears
1,327,400 topdown-fetch-lat # 25.1% Fetch Latency # 13.7% Fetch Bandwidth
497,775 topdown-mem-bound # 9.4% Memory Bound # 14.1% Core Bound
1.002701530 seconds time elapsed
0.002744000 seconds user
0.000000000 seconds sys
Fixes: 63e39aa6ae103451 ("perf stat: Support L2 Topdown events")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220826140057.3289401-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This change fixes a mis-handling of the LANDLOCK_ACCESS_FS_REFER right
when multiple rulesets/domains are stacked. The expected behaviour was
that an additional ruleset can only restrict the set of permitted
operations, but in this particular case, it was potentially possible to
re-gain the LANDLOCK_ACCESS_FS_REFER right.
With the introduction of LANDLOCK_ACCESS_FS_REFER, we added the first
globally denied-by-default access right. Indeed, this lifted an initial
Landlock limitation to rename and link files, which was initially always
denied when the source or the destination were different directories.
This led to an inconsistent backward compatibility behavior which was
only taken into account if no domain layer were using the new
LANDLOCK_ACCESS_FS_REFER right. However, when restricting a thread with
a new ruleset handling LANDLOCK_ACCESS_FS_REFER, all inherited parent
rulesets/layers not explicitly handling LANDLOCK_ACCESS_FS_REFER would
behave as if they were handling this access right and with all their
rules allowing it. This means that renaming and linking files could
became allowed by these parent layers, but all the other required
accesses must also be granted: all layers must allow file removal or
creation, and renaming and linking operations cannot lead to privilege
escalation according to the Landlock policy. See detailed explanation
in commit b91c3e4ea756 ("landlock: Add support for file reparenting with
LANDLOCK_ACCESS_FS_REFER").
To say it another way, this bug may lift the renaming and linking
limitations of the initial Landlock version, and a same ruleset can
enforce different restrictions depending on previous or next enforced
ruleset (i.e. inconsistent behavior). The LANDLOCK_ACCESS_FS_REFER right
cannot give access to data not already allowed, but this doesn't follow
the contract of the first Landlock ABI. This fix puts back the
limitation for sandboxes that didn't opt-in for this additional right.
For instance, if a first ruleset allows LANDLOCK_ACCESS_FS_MAKE_REG on
/dst and LANDLOCK_ACCESS_FS_REMOVE_FILE on /src, renaming /src/file to
/dst/file is denied. However, without this fix, stacking a new ruleset
which allows LANDLOCK_ACCESS_FS_REFER on / would now permit the
sandboxed thread to rename /src/file to /dst/file .
This change fixes the (absolute) rule access rights, which now always
forbid LANDLOCK_ACCESS_FS_REFER except when it is explicitly allowed
when creating a rule.
Making all domain handle LANDLOCK_ACCESS_FS_REFER was an initial
approach but there is two downsides:
* it makes the code more complex because we still want to check that a
rule allowing LANDLOCK_ACCESS_FS_REFER is legitimate according to the
ruleset's handled access rights (i.e. ABI v1 != ABI v2);
* it would not allow to identify if the user created a ruleset
explicitly handling LANDLOCK_ACCESS_FS_REFER or not, which will be an
issue to audit Landlock.
Instead, this change adds an ACCESS_INITIALLY_DENIED list of
denied-by-default rights, which (only) contains
LANDLOCK_ACCESS_FS_REFER. All domains are treated as if they are also
handling this list, but without modifying their fs_access_masks field.
A side effect is that the errno code returned by rename(2) or link(2)
*may* be changed from EXDEV to EACCES according to the enforced
restrictions. Indeed, we now have the mechanic to identify if an access
is denied because of a required right (e.g. LANDLOCK_ACCESS_FS_MAKE_REG,
LANDLOCK_ACCESS_FS_REMOVE_FILE) or if it is denied because of missing
LANDLOCK_ACCESS_FS_REFER rights. This may result in different errno
codes than for the initial Landlock version, but this approach is more
consistent and better for rename/link compatibility reasons, and it
wasn't possible before (hence no backport to ABI v1). The
layout1.rename_file test reflects this change.
Add 4 layout1.refer_denied_by_default* test suites to check that the
behavior of a ruleset not handling LANDLOCK_ACCESS_FS_REFER (ABI v1) is
unchanged even if another layer handles LANDLOCK_ACCESS_FS_REFER (i.e.
ABI v1 precedence). Make sure rule's absolute access rights are correct
by testing with and without a matching path. Add test_rename() and
test_exchange() helpers.
Extend layout1.inval tests to check that a denied-by-default access
right is not necessarily part of a domain's handled access rights.
Test coverage for security/landlock is 95.3% of 599 lines according to
gcc/gcov-11.
Fixes: b91c3e4ea756 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Reviewed-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20220831203840.1370732-1-mic@digikod.net
Cc: stable@vger.kernel.org
[mic: Constify and slightly simplify test helpers]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
PCI interpretation compile fixes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, bpf and wireless.
Current release - regressions:
- bpf:
- fix wrong last sg check in sk_msg_recvmsg()
- fix kernel BUG in purge_effective_progs()
- mac80211:
- fix possible leak in ieee80211_tx_control_port()
- potential NULL dereference in ieee80211_tx_control_port()
Current release - new code bugs:
- nfp: fix the access to management firmware hanging
Previous releases - regressions:
- ip: fix triggering of 'icmp redirect'
- sched: tbf: don't call qdisc_put() while holding tree lock
- bpf: fix corrupted packets for XDP_SHARED_UMEM
- bluetooth: hci_sync: fix suspend performance regression
- micrel: fix probe failure
Previous releases - always broken:
- tcp: make global challenge ack rate limitation per net-ns and
default disabled
- tg3: fix potential hang-up on system reboot
- mac802154: fix reception for no-daddr packets
Misc:
- r8152: add PID for the lenovo onelink+ dock"
* tag 'net-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
net/smc: Remove redundant refcount increase
Revert "sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb"
tcp: make global challenge ack rate limitation per net-ns and default disabled
tcp: annotate data-race around challenge_timestamp
net: dsa: hellcreek: Print warning only once
ip: fix triggering of 'icmp redirect'
sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb
selftests: net: sort .gitignore file
Documentation: networking: correct possessive "its"
kcm: fix strp_init() order and cleanup
mlxbf_gige: compute MDIO period based on i1clk
ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handler
net: lan966x: improve error handle in lan966x_fdma_rx_get_frame()
nfp: fix the access to management firmware hanging
net: phy: micrel: Make the GPIO to be non-exclusive
net: virtio_net: fix notification coalescing comments
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
net: sched: tbf: don't call qdisc_put() while holding tree lock
net: Use u64_stats_fetch_begin_irq() for stats fetch.
net: dsa: xrs700x: Use irqsave variant for u64 stats update
...
|
|
Enable io_uring zerocopy send tests back and fix them up to follow the
new inteface.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c8e5018c516093bdad0b6e19f2f9847dea17e4d2.1662027856.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We're going to change API, to avoid build problems with a couple of
following commits, disable io_uring testing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/12b7507223df04fbd12aa05fc0cb544b51d7ed79.1662027856.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is the result of `sort tools/testing/selftests/net/.gitignore`, but
preserving the comment at the top.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Link: https://lore.kernel.org/r/20220829184748.1535580-1-axelrasmussen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hongtao Yu reported problem when displaying uregs in perf script
for system wide perf.data:
# perf script -F uregs | head -10
Samples for 'dummy:HG' event do not have UREGS attribute set. Cannot print 'uregs' field.
The problem is the extra dummy event added for system wide,
which does not have proper sample_type setup.
Skipping attr check completely for dummy event as suggested
by Namhyung, because it does not have any samples anyway.
Reported-by: Hongtao Yu <hoy@fb.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220831124041.219925-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previous behavior is to segfault if there is no CPU PMU table and a
metric is sought. To reproduce compile with NO_JEVENTS=1 then request a
metric, for example, "perf stat -M IPC true".
Committer testing:
Before:
$ make -k NO_JEVENTS=1 BUILD_BPF_SKEL=1 O=/tmp/build/perf-urgent -C tools/perf install-bin
$ perf stat -M IPC true
Segmentation fault (core dumped)
$
After:
$ perf stat -M IPC true
Usage: perf stat [<options>] [<command>]
-M, --metrics <metric/metric group list>
monitor specified metrics or metric groups (separated by ,)
$
Fixes: 00facc760903be66 ("perf jevents: Switch build to use jevents.py")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <rogers.email@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220830164846.401143-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
After running the nolibc tests, the "git status" is not clean because
the generated files are not ignored. Create a `.gitignore` inside the
selftests/nolibc directory to ignore them.
Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Cc: Fernanda Ma'rouf <fernandafmr2@gmail.com>
Signed-off-by: Fernanda Ma'rouf <fernandafmr12@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It presents the supported targets, and becomes the default target to
save the user from having to read the makefile. The "all" target was
placed after it and now points to "run" to do everything since it's
no longer the default one.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It's not convenient to rely on a sysroot built in another directory,
especially when running cross-compilation tests, where one has to
switch back and forth between directories.
Let's make it possible to install the sysroot directly in the test
directory. It's not big and even benefits from being copied by arch
so that it's easier to switch between archs if needed. The new
"sysroot" target does this, it just calls "headers_standalone" from
nolibc to install the sysroot right here.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The "run" target will build the kernel and start it in QEMU. The
"rerun" target will not have the kernel dependency and will just try
to start QEMU. The QEMU architecture used to start the kernel is
derived from the configured ARCH. This might need to be improved
for archs which include different variants under the same name
(mips vs mipsel, +/-64, riscv32 vs riscv64). This could be tested
for i386, x86, arm, arm64, mips and riscv (the later two reporting
issues on some tests).
It is possible to pass a test specification for nolibc-test in the TEST
variable, which will be passed as-is as NOLIBC_TEST.
On success, the number of successful tests is printed. On failure, failed
lines are individually printed.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
While most archs will work fine with "make defconfig", not all will
do, and it's not always easy to remember the most suitable choice to
use for a specific architecture.
This adds a "defconfig" target to the Makefile so that one may easily
run "make -C ... defconfig" and make sure to clean and rebuild a fresh
config. This is *not* used by default because we want to preserve the
user's config by default.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The "kernel" target rebuilds the kernel with the current config for the
selected arch, with an initramfs containing the nolibc-test utility.
Since image names depend on the architecture, the currently supported
ones are referenced and resolved based on the architecture.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Adding support for glibc can be useful to distinguish between bugs in
nolibc and bugs in the kernel when a syscall reports an unusual value.
It's not that much work and should not affect the long term
maintainability of the tests. The necessary changes can essentially be
summed up like this:
- set _GNU_SOURCE a the top to access some definitions
- many includes added when we know we don't come from nolibc (missing
the stdio include guard)
- disable gettid() which is not exposed by glibc
- disable gettimeofday's support of bad pointers since these crash
in glibc
- add a simple itoa() for errorname(); strerror() is too verbose (no
way to get short messages). strerrorname_np() was added in modern
glibc (2.32) to do exactly this but that 's too recent to be usable
as the default fallback.
- use the standard ioperm() definition. May be we need to implement
ioperm() in nolibc if that's useful.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If /proc is not available (program run inside a chroot or without
sufficient permissions), it's better to disable the associated tests.
Some will be preserved like the ones which check for a failure to
create some entries there since they're still supposed to fail.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Most of the time the program will be run alone in an initramfs. There
is no value in requiring the user to populate /dev and /proc for such
tests, we can do it ourselves, and it participates to the tests at the
same time.
What's done here is that when called as init (getpid()==1) we check
if /dev exists or create it, if /dev/console and /dev/null exists,
otherwise we try to mount a devtmpfs there, and if it fails we fall
back to mknod. The console is reopened if stdout was closed. Finally
/proc is created and mounted if /proc/self cannot be found. This is
sufficient for most tests.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
QEMU, when started with "-device isa-debug-exit -no-reboot" will exit
with status code 2N+1 when N is written to 0x501. This is particularly
convenient for automated tests but this is not portable. As such we
only enable this on x86_64 when pid==1. In addition, this requires an
ioperm() call but in order not to have to define arch-specific syscalls
we just perform the syscall by hand there.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The idea is to ease automated testing under qemu. If the test succeeds
while running as PID 1, indicating the system was booted with init=/test,
let's just power off so that qemu can exit with a successful code. In
other situations it will exit and provoke a panic, which may be caught
for example with CONFIG_PVPANIC.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The test series called "stdlib" covers some libc functions (string,
stdlib etc). By default they are automatically run after "syscall"
but may be requested in argument or in variable NOLIBC_TEST.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|