aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2018-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: 1) Fix RCU locking in xfrm_local_error(), from Taehee Yoo. 2) Fix return value assignments and thus error checking in iwl_mvm_start_ap_ibss(), from Johannes Berg. 3) Don't count header length twice in vti4, from Stefano Brivio. 4) Fix deadlock in rt6_age_examine_exception, from Eric Dumazet. 5) Fix out-of-bounds access in nf_sk_lookup_slow{v4,v6}() from Subash Abhinov. 6) Check nladdr size in netlink_connect(), from Alexander Potapenko. 7) VF representor SQ numbers are 32 not 16 bits, in mlx5 driver, from Or Gerlitz. 8) Out of bounds read in skb_network_protocol(), from Eric Dumazet. 9) r8169 driver sets driver data pointer after register_netdev() which is too late. Fix from Heiner Kallweit. 10) Fix memory leak in mlx4 driver, from Moshe Shemesh. 11) The multi-VLAN decap fix added a regression when dealing with device that lack a MAC header, such as tun. Fix from Toshiaki Makita. 12) Fix integer overflow in dynamic interrupt coalescing code. From Tal Gilboa. 13) Use after free in vrf code, from David Ahern. 14) IPV6 route leak between VRFs fix, also from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: mvneta: fix enable of all initialized RXQs net/ipv6: Fix route leaking between VRFs vrf: Fix use after free and double free in vrf_finish_output ipv6: sr: fix seg6 encap performances with TSO enabled net/dim: Fix int overflow vlan: Fix vlan insertion for packets without ethernet header net: Fix untag for vlan packets without ethernet header atm: iphase: fix spelling mistake: "Receiverd" -> "Received" vhost: validate log when IOTLB is enabled qede: Do not drop rx-checksum invalidated packets. hv_netvsc: enable multicast if necessary ip_tunnel: Resolve ipsec merge conflict properly. lan78xx: Crash in lan78xx_writ_reg (Workqueue: events lan78xx_deferred_multicast_write) qede: Fix barrier usage after tx doorbell write. vhost: correctly remove wait queue during poll failure net/mlx4_core: Fix memory leak while delete slave's resources net/mlx4_en: Fix mixed PFC and Global pause user control requests net/smc: use announced length in sock_recvmsg() llc: properly handle dev_queue_xmit() return value strparser: Fix sign of err codes ...
2018-03-31selftests/bpf: Selftest for sys_bind post-hooks.Andrey Ignatov3-1/+493
Add selftest for attach types `BPF_CGROUP_INET4_POST_BIND` and `BPF_CGROUP_INET6_POST_BIND`. The main things tested are: * prog load behaves as expected (valid/invalid accesses in prog); * prog attach behaves as expected (load- vs attach-time attach types); * `BPF_CGROUP_INET_SOCK_CREATE` can be attached in a backward compatible way; * post-hooks return expected result and errno. Example: # ./test_sock Test case: bind4 load with invalid access: src_ip6 .. [PASS] Test case: bind4 load with invalid access: mark .. [PASS] Test case: bind6 load with invalid access: src_ip4 .. [PASS] Test case: sock_create load with invalid access: src_port .. [PASS] Test case: sock_create load w/o expected_attach_type (compat mode) .. [PASS] Test case: sock_create load w/ expected_attach_type .. [PASS] Test case: attach type mismatch bind4 vs bind6 .. [PASS] Test case: attach type mismatch bind6 vs bind4 .. [PASS] Test case: attach type mismatch default vs bind4 .. [PASS] Test case: attach type mismatch bind6 vs sock_create .. [PASS] Test case: bind4 reject all .. [PASS] Test case: bind6 reject all .. [PASS] Test case: bind6 deny specific IP & port .. [PASS] Test case: bind4 allow specific IP & port .. [PASS] Test case: bind4 allow all .. [PASS] Test case: bind6 allow all .. [PASS] Summary: 16 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-31selftests/bpf: Selftest for sys_connect hooksAndrey Ignatov8-4/+284
Add selftest for BPF_CGROUP_INET4_CONNECT and BPF_CGROUP_INET6_CONNECT attach types. Try to connect(2) to specified IP:port and test that: * remote IP:port pair is overridden; * local end of connection is bound to specified IP. All combinations of IPv4/IPv6 and TCP/UDP are tested. Example: # tcpdump -pn -i lo -w connect.pcap 2>/dev/null & [1] 478 # strace -qqf -e connect -o connect.trace ./test_sock_addr.sh Wait for testing IPv4/IPv6 to become available ... OK Load bind4 with invalid type (can pollute stderr) ... REJECTED Load bind4 with valid type ... OK Attach bind4 with invalid type ... REJECTED Attach bind4 with valid type ... OK Load connect4 with invalid type (can pollute stderr) libbpf: load bpf \ program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: 0: (b7) r2 = 23569 1: (63) *(u32 *)(r1 +24) = r2 2: (b7) r2 = 16777343 3: (63) *(u32 *)(r1 +4) = r2 invalid bpf_context access off=4 size=4 [ 1518.404609] random: crng init done libbpf: -- END LOG -- libbpf: failed to load program 'cgroup/connect4' libbpf: failed to load object './connect4_prog.o' ... REJECTED Load connect4 with valid type ... OK Attach connect4 with invalid type ... REJECTED Attach connect4 with valid type ... OK Test case #1 (IPv4/TCP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Requested: connect(192.168.1.254, 4040) from (*, *) .. Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56068) Test case #2 (IPv4/UDP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Requested: connect(192.168.1.254, 4040) from (*, *) .. Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56447) Load bind6 with invalid type (can pollute stderr) ... REJECTED Load bind6 with valid type ... OK Attach bind6 with invalid type ... REJECTED Attach bind6 with valid type ... OK Load connect6 with invalid type (can pollute stderr) libbpf: load bpf \ program failed: Permission denied libbpf: -- BEGIN DUMP LOG --- libbpf: 0: (b7) r6 = 0 1: (63) *(u32 *)(r1 +12) = r6 invalid bpf_context access off=12 size=4 libbpf: -- END LOG -- libbpf: failed to load program 'cgroup/connect6' libbpf: failed to load object './connect6_prog.o' ... REJECTED Load connect6 with valid type ... OK Attach connect6 with invalid type ... REJECTED Attach connect6 with valid type ... OK Test case #3 (IPv6/TCP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *) Actual: connect(::1, 6666) from (::6, 37458) Test case #4 (IPv6/UDP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *) Actual: connect(::1, 6666) from (::6, 39315) ### SUCCESS # egrep 'connect\(.*AF_INET' connect.trace | \ > egrep -vw 'htons\(1025\)' | fold -b -s -w 72 502 connect(7, {sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, 128) = 0 502 connect(8, {sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, 128) = 0 502 connect(9, {sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0 502 connect(10, {sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0 # fg tcpdump -pn -i lo -w connect.pcap 2> /dev/null # tcpdump -r connect.pcap -n tcp | cut -c 1-72 reading from file connect.pcap, link-type EN10MB (Ethernet) 17:57:40.383533 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [S], seq 1333 17:57:40.383566 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [S.], seq 112 17:57:40.383589 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [.], ack 1, w 17:57:40.384578 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [R.], seq 1, 17:57:40.403327 IP6 ::6.37458 > ::1.6666: Flags [S], seq 406513443, win 17:57:40.403357 IP6 ::1.6666 > ::6.37458: Flags [S.], seq 2448389240, ac 17:57:40.403376 IP6 ::6.37458 > ::1.6666: Flags [.], ack 1, win 342, opt 17:57:40.404263 IP6 ::1.6666 > ::6.37458: Flags [R.], seq 1, ack 1, win Signed-off-by: Andrey Ignatov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-31selftests/bpf: Selftest for sys_bind hooksAndrey Ignatov4-1/+517
Add selftest to work with bpf_sock_addr context from `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` programs. Try to bind(2) on IP:port and apply: * loads to make sure context can be read correctly, including narrow loads (byte, half) for IP and full-size loads (word) for all fields; * stores to those fields allowed by verifier. All combination from IPv4/IPv6 and TCP/UDP are tested. Both scenarios are tested: * valid programs can be loaded and attached; * invalid programs can be neither loaded nor attached. Test passes when expected data can be read from context in the BPF-program, and after the call to bind(2) socket is bound to IP:port pair that was written by BPF-program to the context. Example: # ./test_sock_addr Attached bind4 program. Test case #1 (IPv4/TCP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Test case #2 (IPv4/UDP): Requested: bind(192.168.1.254, 4040) .. Actual: bind(127.0.0.1, 4444) Attached bind6 program. Test case #3 (IPv6/TCP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) Test case #4 (IPv6/UDP): Requested: bind(face:b00c:1234:5678::abcd, 6060) .. Actual: bind(::1, 6666) ### SUCCESS Signed-off-by: Andrey Ignatov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-31libbpf: Support expected_attach_type at prog loadAndrey Ignatov5-46/+133
Support setting `expected_attach_type` at prog load time in both `bpf/bpf.h` and `bpf/libbpf.h`. Since both headers already have API to load programs, new functions are added not to break backward compatibility for existing ones: * `bpf_load_program_xattr()` is added to `bpf/bpf.h`; * `bpf_prog_load_xattr()` is added to `bpf/libbpf.h`. Both new functions accept structures, `struct bpf_load_program_attr` and `struct bpf_prog_load_attr` correspondingly, where new fields can be added in the future w/o changing the API. Standard `_xattr` suffix is used to name the new API functions. Since `bpf_load_program_name()` is not used as heavily as `bpf_load_program()`, it was removed in favor of more generic `bpf_load_program_xattr()`. Signed-off-by: Andrey Ignatov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-30tc-testing: Add newline when writing test case filesLucas Bates1-0/+1
When using the -i feature to generate random ID numbers for test cases in tdc, the function that writes the JSON to file doesn't add a newline character to the end of the file, so we have to add our own. Signed-off-by: Lucas Bates <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-30tc-testing: add connmark action testsRoman Mashak1-0/+291
Signed-off-by: Roman Mashak <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-29Merge branch 'perf/urgent' into perf/coreIngo Molnar5-2/+196
Conflicts: kernel/events/hw_breakpoint.c Signed-off-by: Ingo Molnar <[email protected]>
2018-03-28selftests/bpf: test for bpf_get_stackid() from raw tracepointsAlexei Starovoitov1-21/+70
similar to traditional traceopint test add bpf_get_stackid() test from raw tracepoints and reduce verbosity of existing stackmap test Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-28libbpf: add bpf_raw_tracepoint_open helperAlexei Starovoitov3-0/+23
add bpf_raw_tracepoint_open(const char *name, int prog_fd) api to libbpf Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-28tools/kvm_stat: Remove unused functionCole Robinson1-3/+0
Unused since added in 18e8f4100 Signed-off-by: Cole Robinson <[email protected]> Reviewed-and-tested-by: Stefan Raspl <[email protected]> Signed-off-by: Radim Krčmář <[email protected]>
2018-03-28tools/kvm_stat: Don't use deprecated file()Cole Robinson1-1/+1
$ python3 tools/kvm/kvm_stat/kvm_stat Traceback (most recent call last): File "tools/kvm/kvm_stat/kvm_stat", line 1668, in <module> main() File "tools/kvm/kvm_stat/kvm_stat", line 1639, in main assign_globals() File "tools/kvm/kvm_stat/kvm_stat", line 1618, in assign_globals for line in file('/proc/mounts'): NameError: name 'file' is not defined open() is the python3 way, and works on python2.6+ Signed-off-by: Cole Robinson <[email protected]> Reviewed-and-tested-by: Stefan Raspl <[email protected]> Signed-off-by: Radim Krčmář <[email protected]>
2018-03-28tools/kvm_stat: Fix python3 syntaxCole Robinson1-2/+4
$ python3 tools/kvm/kvm_stat/kvm_stat File "tools/kvm/kvm_stat/kvm_stat", line 1137 def sortkey((_k, v)): ^ SyntaxError: invalid syntax Fix it in a way that's compatible with python2 and python3 Signed-off-by: Cole Robinson <[email protected]> Tested-by: Stefan Raspl <[email protected]> Signed-off-by: Radim Krčmář <[email protected]>
2018-03-28Merge branch 'fixes' into nextMichael Ellerman3-1/+17
Merge our fixes branch from the 4.16 cycle. There were a number of important fixes merged, in particular some Power9 workarounds that we want in next for testing purposes. There's also been some conflicting changes in the CPU features code which are best merged and tested before going upstream.
2018-03-28Merge 4.16-rc7 into char-misc-nextGreg Kroah-Hartman26-57/+393
We want the hyperv fix in here for merging and testing. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-27perf vendor events s390: Add JSON files for IBM z14Thomas Richter4-0/+469
Add CPU measurement counter facility event description files (json files) for IBM z14. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf vendor events s390: Add JSON files for IBM z13Thomas Richter4-0/+511
Add CPU measurement counter facility event description files (json files) for IBM z13. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf vendor events s390: Add JSON files for IBM zEC12 zBC12Thomas Richter4-0/+385
Add CPU measurement counter facility event description files (json files) for IBM zEC12 and zBC12. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf vendor events s390: Add JSON files for IBM z196Thomas Richter4-0/+319
Add CPU measurement counter facility event description files (json files) for IBM z196. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf vendor events s390: Add JSON files for IBM z10EC z10BCThomas Richter4-0/+284
Add CPU measurement counter facility event description files (JSON files) for IBM z10EC and z10BC. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf mmap: Be consistent when checking for an unmaped ring bufferArnaldo Carvalho de Melo1-1/+12
The previous patch is insufficient to cure the reported 'perf trace' segfault, as it only cures the perf_mmap__read_done() case, moving the segfault to perf_mmap__read_init() functio, fix it by doing the same refcount check. Cc: Adrian Hunter <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Fixes: 8872481bd048 ("perf mmap: Introduce perf_mmap__read_init()") Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf mmap: Fix accessing unmapped mmap in perf_mmap__read_done()Kan Liang1-0/+6
There is a segmentation fault when running 'perf trace'. For example: [root@jouet e]# perf trace -e *chdir -o /tmp/bla perf report --ignore-vmlinux -i ../perf.data The perf_mmap__consume() could unmap the mmap. It needs to check the refcnt in perf_mmap__read_done(). Reported-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Kan Liang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Fixes: ee023de05f35 ("perf mmap: Introduce perf_mmap__read_done()") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf build: Fix check-headers.sh opts assignmentJiri Olsa1-0/+1
Currently the "opts" variable is not zero-ed and we keep on adding to it, ending up with: $ check-headers.sh 2>&1 + opts=' "-B"' + opts=' "-B" "-B"' + opts=' "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B" "-B" "-B"' Fix this by initializing it in the check() function, right before starting the loop. Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27tc-testing: Correct compound statements for namespace executionLucas Bates1-5/+5
If tdc is executing test cases inside a namespace, only the first command in a compound statement will be executed inside the namespace by tdc. As a result, the subsequent commands are not executed inside the namespace and the test will fail. Example: for i in {x..y}; do args="foo"; done && tc actions add $args The namespace execution feature will prepend 'ip netns exec' to the command: ip netns exec tcut for i in {x..y}; do args="foo"; done && \ tc actions add $args So the actual tc command is not parsed by the shell as being part of the namespace execution. Enclosing these compound statements inside a bash invocation with proper escape characters resolves the problem by creating a subshell inside the namespace. Signed-off-by: Lucas Bates <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27tools/thermal: tmon: fix for segfaultFrank Asseg2-6/+7
Fixes a segfault occurring when e.g. <TAB> is pressed multiple times in the ncurses tmon application. The segfault is caused by incrementing cur_thermal_record in the main function without checking if it's value reached NR_THERMAL_RECORD immediately. Since the boundary check only occurred in update_thermal_data a race condition existed, which lead to an attempted read beyond the last element of the trec array. The fix was implemented by moving the cur_thermal_record incrementation to the update_thermal_data function using a temporary variable on which the boundary condition is checked before updating cur_thread_record, so that the variable is never incremented beyond the trec array's boundary. It seems the segfault does not occur on every machine: On a HP EliteBook G4 the segfault happens, while it does not happen on a Thinkpad T540p. Signed-off-by: Frank Asseg <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2018-03-27objtool: Add Clang supportJosh Poimboeuf1-0/+11
Since the ORC unwinder was made the default on x86_64, Clang-built defconfig kernels have triggered some new objtool warnings: drivers/gpu/drm/i915/i915_gpu_error.o: warning: objtool: i915_error_printf()+0x6c: return with modified stack frame drivers/gpu/drm/i915/intel_display.o: warning: objtool: pipe_config_err()+0xa6: return with modified stack frame The problem is that objtool has never seen clang-built binaries before. Shockingly enough, objtool is apparently able to follow the code flow mostly fine, except for one instruction sequence. Instead of a LEAVE instruction, clang restores RSP and RBP the long way: 67c: 48 89 ec mov %rbp,%rsp 67f: 5d pop %rbp Teach objtool about this new code sequence. Reported-and-test-by: Matthias Kaehlcke <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Matthias Kaehlcke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/fce88ce81c356eedcae7f00ed349cfaddb3363cc.1521741586.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2018-03-26selftests: Print the test we're running to /dev/kmsgMichael Ellerman1-0/+1
Some tests cause the kernel to print things to the kernel log buffer (ie. printk), in particular oops and warnings etc. However when running all the tests in succession it's not always obvious which test(s) caused the kernel to print something. We can narrow it down by printing which test directory we're running in to /dev/kmsg, if it's writable. Example output: [ 170.149149] kselftest: Running tests in powerpc [ 305.300132] kworker/dying (71) used greatest stack depth: 7776 bytes left [ 808.915456] kselftest: Running tests in pstore Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2018-03-26ktest: remove obsolete architecturesArnd Bergmann1-30/+1
A number of architectures are being removed from the kernel, so we no longer need to test them. Acked-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2018-03-25tc-testing: updated police, mirred, skbedit and skbmod with more testsRoman Mashak4-0/+528
Added extra test cases for control actions (reclassify, pipe etc.), cookies, max index value and police args sanity check. Signed-off-by: Roman Mashak <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 and PTI fixes from Ingo Molnar: "Misc fixes: - fix EFI pagetables freeing - fix vsyscall pagetable setting on Xen PV guests - remove ancient CONFIG_X86_PPRO_FENCE=y - x86 is TSO again - fix two binutils (ld) development version related incompatibilities - clean up breakpoint handling - fix an x86 self-test" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Don't use IST entry for #BP stack x86/efi: Free efi_pgd with free_pages() x86/vsyscall/64: Use proper accessor to update P4D entry x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk x86/boot/64: Verify alignment of the LOAD segment x86/build/64: Force the linker to use 2MB page size selftests/x86/ptrace_syscall: Fix for yet more glibc interference
2018-03-24tools: bpftool: don't use hex numbers in JSON outputJakub Kicinski1-1/+1
JSON does not accept hex numbers with 0x prefix. Simply print as decimal numbers, JSON should be primarily machine-readable. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Fixes: 831a0aafe5c3 ("tools: bpftool: add JSON output for `bpftool map *` commands") Signed-off-by: Alexei Starovoitov <[email protected]>
2018-03-23Merge tag 'trace-v4.16-rc4' of ↵Linus Torvalds3-0/+186
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull kprobe fixes from Steven Rostedt: "The documentation for kprobe events says that symbol offets can take both a + and - sign to get to befor and after the symbol address. But in actuality, the code does not support the minus. This fixes that issue, and adds a few more selftests to kprobe events" * tag 'trace-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests: ftrace: Add a testcase for probepoint selftests: ftrace: Add a testcase for string type with kprobe_event selftests: ftrace: Add probe event argument syntax testcase tracing: probeevent: Fix to support minus offset from symbol
2018-03-23perf annotate: Use absolute addresses to calculate jump target offsetsArnaldo Carvalho de Melo1-3/+2
These types of jumps were confusing the annotate browser: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux Percent│ffffffff81a00020: swapgs <SNIP> │ffffffff81a00128: ↓ jae ffffffff81a00139 <syscall_return_via_sysret+0x53> <SNIP> │ffffffff81a00155: → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8> I.e. the syscall_return_via_sysret function is actually "inside" the entry_SYSCALL_64 function, and the offsets in jumps like these (+0x53) are relative to syscall_return_via_sysret, not to syscall_return_via_sysret. Or this may be some artifact in how the assembler marks the start and end of a function and how this ends up in the ELF symtab for vmlinux, i.e. syscall_return_via_sysret() isn't "inside" entry_SYSCALL_64, but just right after it. From readelf -sw vmlinux: 80267: ffffffff81a00020 315 NOTYPE GLOBAL DEFAULT 1 entry_SYSCALL_64 316: ffffffff81a000e6 0 NOTYPE LOCAL DEFAULT 1 syscall_return_via_sysret 0xffffffff81a00020 + 315 > 0xffffffff81a000e6 So instead of looking for offsets after that last '+' sign, calculate offsets for jump target addresses that are inside the function being disassembled from the absolute address, 0xffffffff81a00139 in this case, subtracting from it the objdump address for the start of the function being disassembled, entry_SYSCALL_64() in this case. So, before this patch: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux Percent│ pop %r10 │ pop %r9 │ pop %r8 │ pop %rax │ pop %rsi │ pop %rdx │ pop %rsi │ mov %rsp,%rdi │ mov %gs:0x5004,%rsp │ pushq 0x28(%rdi) │ pushq (%rdi) │ push %rax │ ↑ jmp 6c │ mov %cr3,%rdi │ ↑ jmp 62 │ mov %rdi,%rax │ and $0x7ff,%rdi │ bt %rdi,%gs:0x2219a │ ↑ jae 53 │ btr %rdi,%gs:0x2219a │ mov %rax,%rdi │ ↑ jmp 5b After: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux 0.65 │ → jne swapgs_restore_regs_and_return_to_usermode │ pop %r10 │ pop %r9 │ pop %r8 │ pop %rax │ pop %rsi │ pop %rdx │ pop %rsi │ mov %rsp,%rdi │ mov %gs:0x5004,%rsp │ pushq 0x28(%rdi) │ pushq (%rdi) │ push %rax │ ↓ jmp 132 │ mov %cr3,%rdi │ ┌──jmp 128 │ │ mov %rdi,%rax │ │ and $0x7ff,%rdi │ │ bt %rdi,%gs:0x2219a │ │↓ jae 119 │ │ btr %rdi,%gs:0x2219a │ │ mov %rax,%rdi │ │↓ jmp 121 │119:│ mov %rax,%rdi │ │ bts $0x3f,%rdi │121:│ or $0x800,%rdi │128:└─→or $0x1000,%rdi │ mov %rdi,%cr3 │132: pop %rax │ pop %rdi │ pop %rsp │ → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8> With those at least navigating to the right destination, an improvement for these cases seems to be to be to somehow mark those inner functions, which in this case could be: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux │syscall_return_via_sysret: │ pop %r15 │ pop %r14 │ pop %r13 │ pop %r12 │ pop %rbp │ pop %rbx │ pop %rsi │ pop %r10 │ pop %r9 │ pop %r8 │ pop %rax │ pop %rsi │ pop %rdx │ pop %rsi │ mov %rsp,%rdi │ mov %gs:0x5004,%rsp │ pushq 0x28(%rdi) │ pushq (%rdi) │ push %rax │ ↓ jmp 132 │ mov %cr3,%rdi │ ┌──jmp 128 │ │ mov %rdi,%rax │ │ and $0x7ff,%rdi │ │ bt %rdi,%gs:0x2219a │ │↓ jae 119 │ │ btr %rdi,%gs:0x2219a │ │ mov %rax,%rdi │ │↓ jmp 121 │119:│ mov %rax,%rdi │ │ bts $0x3f,%rdi │121:│ or $0x800,%rdi │128:└─→or $0x1000,%rdi │ mov %rdi,%cr3 │132: pop %rax │ pop %rdi │ pop %rsp │ → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8> This all gets much better viewed if one uses 'perf report --ignore-vmlinux' forcing the usage of /proc/kcore + /proc/kallsyms, when the above actually gets down to: # perf report --ignore-vmlinux ## do '/64', will show the function names containing '64', ## navigate to /entry_SYSCALL_64_after_hwframe.annotation, ## press 'A' to annotate, then 'P' to print that annotation ## to a file ## From another xterm (or see on screen, this 'P' thing is for ## getting rid of those right side scroll bars/spaces): # cat /entry_SYSCALL_64_after_hwframe.annotation entry_SYSCALL_64_after_hwframe() /proc/kcore Event: cycles:ppp Percent Disassembly of section load0: ffffffff9aa00044 <load0>: 11.97 push %rax 4.85 push %rdi push %rsi 2.59 push %rdx 2.27 push %rcx 0.32 pushq $0xffffffffffffffda 1.29 push %r8 xor %r8d,%r8d 1.62 push %r9 0.65 xor %r9d,%r9d 1.62 push %r10 xor %r10d,%r10d 5.50 push %r11 xor %r11d,%r11d 3.56 push %rbx xor %ebx,%ebx 4.21 push %rbp xor %ebp,%ebp 2.59 push %r12 0.97 xor %r12d,%r12d 3.24 push %r13 xor %r13d,%r13d 2.27 push %r14 xor %r14d,%r14d 4.21 push %r15 xor %r15d,%r15d 0.97 mov %rsp,%rdi 5.50 → callq do_syscall_64 14.56 mov 0x58(%rsp),%rcx 7.44 mov 0x80(%rsp),%r11 0.32 cmp %rcx,%r11 → jne swapgs_restore_regs_and_return_to_usermode 0.32 shl $0x10,%rcx 0.32 sar $0x10,%rcx 3.24 cmp %rcx,%r11 → jne swapgs_restore_regs_and_return_to_usermode 2.27 cmpq $0x33,0x88(%rsp) 1.29 → jne swapgs_restore_regs_and_return_to_usermode mov 0x30(%rsp),%r11 8.74 cmp %r11,0x90(%rsp) → jne swapgs_restore_regs_and_return_to_usermode 0.32 test $0x10100,%r11 → jne swapgs_restore_regs_and_return_to_usermode 0.32 cmpq $0x2b,0xa0(%rsp) 0.65 → jne swapgs_restore_regs_and_return_to_usermode I.e. using kallsyms makes the function start/end be done differently than using what is in the vmlinux ELF symtab and actually the hits goes to entry_SYSCALL_64_after_hwframe, which is a GLOBAL() after the start of entry_SYSCALL_64: ENTRY(entry_SYSCALL_64) UNWIND_HINT_EMPTY <SNIP> pushq $__USER_CS /* pt_regs->cs */ pushq %rcx /* pt_regs->ip */ GLOBAL(entry_SYSCALL_64_after_hwframe) pushq %rax /* pt_regs->orig_ax */ PUSH_AND_CLEAR_REGS rax=$-ENOSYS And it goes and ends at: cmpq $__USER_DS, SS(%rsp) /* SS must match SYSRET */ jne swapgs_restore_regs_and_return_to_usermode /* * We win! This label is here just for ease of understanding * perf profiles. Nothing jumps here. */ syscall_return_via_sysret: /* rcx and r11 are already restored (see code above) */ UNWIND_HINT_EMPTY POP_REGS pop_rdi=0 skip_r11rcx=1 So perhaps some people should really just play with '--ignore-vmlinux' to force /proc/kcore + kallsyms. One idea is to do both, i.e. have a vmlinux annotation and a kcore+kallsyms one, when possible, and even show the patched location, etc. Reported-by: Linus Torvalds <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-23perf annotate: Defer searching for comma in raw line till it is neededArnaldo Carvalho de Melo1-1/+2
That strchr() in jump__scnprintf() needs to be nuked somehow, as it, IIRC is already done in jump__parse() and if needed at scnprintf() time, should be stashed in the struct filled in parse() time. For now jus defer it to just before where it is used. Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-23perf annotate: Support jumping from one function to anotherArnaldo Carvalho de Melo2-7/+22
For instance: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux 5.50 │ → callq do_syscall_64 14.56 │ mov 0x58(%rsp),%rcx 7.44 │ mov 0x80(%rsp),%r11 0.32 │ cmp %rcx,%r11 │ → jne swapgs_restore_regs_and_return_to_usermode 0.32 │ shl $0x10,%rcx 0.32 │ sar $0x10,%rcx 3.24 │ cmp %rcx,%r11 │ → jne swapgs_restore_regs_and_return_to_usermode 2.27 │ cmpq $0x33,0x88(%rsp) 1.29 │ → jne swapgs_restore_regs_and_return_to_usermode │ mov 0x30(%rsp),%r11 8.74 │ cmp %r11,0x90(%rsp) │ → jne swapgs_restore_regs_and_return_to_usermode 0.32 │ test $0x10100,%r11 │ → jne swapgs_restore_regs_and_return_to_usermode 0.32 │ cmpq $0x2b,0xa0(%rsp) 0.65 │ → jne swapgs_restore_regs_and_return_to_usermode It'll behave just like a "call" instruction, i.e. press enter or right arrow over one such line and the browser will navigate to the annotated disassembly of that function, which when exited, via left arrow or esc, will come back to the calling function. Now to support jump to an offset on a different function... Reported-by: Linus Torvalds <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-23perf annotate: Add "_local" to jump/offset validation routinesArnaldo Carvalho de Melo3-9/+16
Because they all really check if we can access data structures/visual constructs where a "jump" instruction targets code in the same function, i.e. things like: __pthread_mutex_lock /usr/lib64/libpthread-2.26.so 1.95 │ mov __pthread_force_elision,%ecx │ ┌──test %ecx,%ecx 0.07 │ ├──je 60 │ │ test $0x300,%esi │ │↓ jne 60 │ │ or $0x100,%esi │ │ mov %esi,0x10(%rdi) │ 42:│ mov %esi,%edx │ │ lea 0x16(%r8),%rsi │ │ mov %r8,%rdi │ │ and $0x80,%edx │ │ add $0x8,%rsp │ │→ jmpq __lll_lock_elision │ │ nop 0.29 │ 60:└─→and $0x80,%esi 0.07 │ mov $0x1,%edi 0.29 │ xor %eax,%eax 2.53 │ lock cmpxchg %edi,(%r8) And not things like that "jmpq __lll_lock_elision", that instead should behave like a "call" instruction and "jump" to the disassembly of "___lll_lock_elision". Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-23perf python: Reference Py_None before returning itPetr Machata1-1/+3
Python None objects are handled just like all the other objects with respect to their reference counting. Before returning Py_None, its reference count thus needs to be bumped. Signed-off-by: Petr Machata <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Petr Machata <[email protected]> Link: http://lkml.kernel.org/r/b1e565ecccf68064d8d54f37db5d028dda8fa522.1521675563.git.petrm@mellanox.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-23tc-testing: add selftests for 'bpf' actionDavide Caratti1-0/+289
Test d959: Add cBPF action with valid bytecode Test f84a: Add cBPF action with invalid bytecode Test e939: Add eBPF action with valid object-file Test 282d: Add eBPF action with invalid object-file Test d819: Replace cBPF bytecode and action control Test 6ae3: Delete cBPF action Test 3e0d: List cBPF actions Test 55ce: Flush BPF actions Test ccc3: Add cBPF action with duplicate index Test 89c7: Add cBPF action with invalid index Test 7ab9: Add cBPF action with cookie Changes since v1: - use index=2^32-1 in test ccc3, add tests 7a89, 89c7 (thanks Roman Mashak) - added test 282d Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-23bpftool: Adjust to new print_bpf_insn interfaceJiri Olsa1-6/+6
Change bpftool to skip the removed struct bpf_verifier_env argument in print_bpf_insn. It was passed as NULL anyway. No functional change intended. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-23selftests: ftrace: Add a testcase for probepointMasami Hiramatsu1-0/+43
Add a testcase for probe point definition. This tests symbol, address and symbol+offset syntax. The offset must be positive and smaller than UINT_MAX. Link: http://lkml.kernel.org/r/152129043097.31874.14273580606301767394.stgit@devbox Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2018-03-23selftests: ftrace: Add a testcase for string type with kprobe_eventMasami Hiramatsu1-0/+46
Add a testcase for string type with kprobe event. This tests good/bad syntax combinations and also the traced data is correct in several way. Link: http://lkml.kernel.org/r/152129038381.31874.9201387794548737554.stgit@devbox Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2018-03-23selftests: ftrace: Add probe event argument syntax testcaseMasami Hiramatsu1-0/+97
Add a testcase for probe event argument syntax which ensures the kprobe_events interface correctly parses given event arguments. Link: http://lkml.kernel.org/r/152129033679.31874.12705519603869152799.stgit@devbox Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller19-53/+140
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-0/+4
Pull networking fixes from David Miller: 1) Always validate XFRM esn replay attribute, from Florian Westphal. 2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long. 3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul Triebitz. 4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel Axtens. 5) Fix some interrupt handling issues in e1000e driver, from Benjamin Poitier. 6) Use strlcpy() in several ethtool get_strings methods, from Florian Fainelli. 7) Fix rhlist dup insertion, from Paul Blakey. 8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev. 9) Fix driver unload crash when link is up in smsc911x, from Jeremy Linton. 10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric Dumazet. 11) Need to purge the write queue when TCP connections are aborted, otherwise userspace using MSG_ZEROCOPY can't close the fd. From Soheil Hassas Yeganeh. 12) Fix double free in error path of team driver, from Arkadi Sharshevsky. 13) Filter fixes for hv_netvsc driver, from Stephen Hemminger. 14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo Bianconi. 15) Properly filter out unsupported feature flags in macvlan driver, from Shannon Nelson. 16) Don't request loading the diag module for a protocol if the protocol itself is not even registered. From Xin Long. 17) If datagram connect fails in ipv6, make sure the socket state is consistent afterwards. From Paolo Abeni. 18) Use after free in qed driver, from Dan Carpenter. 19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the entry. From Sabrina Dubroca. 20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins. 21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita. 22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel. 23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti. 24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli. 25) Memory leak in gemini driver, from Igor Pylypiv. 26) IDR leaks in error paths of tcf_*_init() functions, from Davide Caratti. 27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun. 28) Missing dev_put() in error path of macsec_newlink(), from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits) macsec: missing dev_put() on error in macsec_newlink() net: dsa: Fix functional dsa-loop dependency on FIXED_PHY hv_netvsc: common detach logic hv_netvsc: change GPAD teardown order on older versions hv_netvsc: use RCU to fix concurrent rx and queue changes hv_netvsc: disable NAPI before channel close net/ipv6: Handle onlink flag with multipath routes ppp: avoid loop in xmit recursion detection code ipv6: sr: fix NULL pointer dereference when setting encap source address ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state net: aquantia: driver version bump net: aquantia: Implement pci shutdown callback net: aquantia: Allow live mac address changes net: aquantia: Add tx clean budget and valid budget handling logic net: aquantia: Change inefficient wait loop on fw data reads net: aquantia: Fix a regression with reset on old firmware net: aquantia: Fix hardware reset when SPI may rarely hangup s390/qeth: on channel error, reject further cmd requests s390/qeth: lock read device while queueing next buffer s390/qeth: when thread completes, wake up all waiters ...
2018-03-22selftests: Add multipath tests for onlink flagDavid Ahern1-3/+95
Add multipath tests for onlink flag: one test with onlink added to both nexthops, then tests with onlink added to only 1 nexthop. Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-22usbip: tools: usbipd: exclude exported devices from exportable device listShuah Khan1-1/+15
usbipd includes exported devices in response to exportable device list. Exclude exported devices from exportable device list to avoid: - import requests for devices that are exported only to fail the request. - revealing devices that are imported by a client to another client. Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-21perf annotate: Mark jumps to outher functions with the call arrowArnaldo Carvalho de Melo2-3/+53
Things like this in _cpp_lex_token (gcc's cc1 program): cpp_named_operator2name@@Base+0xa72 Point to a place that is after the cpp_named_operator2name boundaries, i.e. in the ELF symbol table for cc1 cpp_named_operator2name is marked as being 32-bytes long, but it in fact is much larger than that, so we seem to need a symbols__find() routine that looks for >= current->start and < next_symbol->start, possibly just for C++ objects? For now lets just make some progress by marking jumps to outside the current function as call like. Actual navigation will come next, with further understanding of how the symbol searching and disassembly should be done. Cc: Adrian Hunter <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-21perf annotate: Pass function descriptor to its instruction parsing routinesArnaldo Carvalho de Melo3-16/+21
We need that to figure out if jumps have targets in a different function. E.g. _cpp_lex_token(), in /usr/libexec/gcc/x86_64-redhat-linux/5.3.1/cc1 has a line like this: jne c469be <cpp_named_operator2name@@Base+0xa72> Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-21selftests/seccomp: Allow get_metadata to XFAILKees Cook2-3/+38
Since seccomp_get_metadata() depends on CHECKPOINT_RESTORE, XFAIL the test if the ptrace reports it as missing. Signed-off-by: Kees Cook <[email protected]> Acked-by: Tycho Andersen <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2018-03-21selftests/android/ion: Makefile: fix build errorAnders Roxell2-1/+2
Fails to build iomap_test.c due to missing include gcc -I. -I../../../../../drivers/staging/android/uapi/ -Wall -O2 -g ionmap_test.c ipcsocket.c ionutils.c -o ionmap_test ionmap_test.c:12:27: fatal error: linux/dma-buf.h: No such file or directory #include <linux/dma-buf.h> ^ compilation terminated. <builtin>: recipe for target 'ionmap_test' failed make[2]: *** [ionmap_test] Error 1 In the current code, we add a new -I ../../../../../usr/include/ to the INCLUDEDIR variable. Also add ionmap_test to the .gitignore file. Fixes: ac93f7046a53 ("selftests: ion: Add simple test with the vgem driver") Signed-off-by: Anders Roxell <[email protected]> Acked-by: Laura Abbott <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.