| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now anything that uses STRARRAY_FLAGS, like the 'fsmount' syscall will
support mapping or-ed strings back to a value that can be used in a
filter.
In some cases, where STRARRAY_FLAGS isn't used but instead the scnprintf
is a special one because of specific needs, like for mmap, then one has
to set the ->pars to the strarray. See the next cset.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Brendan Gregg <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Counterpart of strarray__scnprintf_flags(), i.e. from a expression like:
# perf trace -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|FIXED|DENYWRITE"
I.e. that "flags==PRIVATE|FIXED|DENYWRITE", turn that into
# perf trace -e syscalls:sys_enter_mmap --filter=0x812
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Brendan Gregg <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that we can later use it with the strarray__strtoul_flags() routine
that will be soon introduced.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Since its values are in two ranges of values we ended up codifying it
using a 'struct strarrays', so now hook it up with STUL_STRARRAYS so
that we can do:
# perf trace -e syscalls:*enter_fcntl --filter=cmd==SETLK||cmd==SETLKW
0.000 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4dee0)
1.523 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de90)
1.629 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de90)
2.711 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de70)
^C#
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Brendan Gregg <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To allow going from string to integer for 'struct strarrays'.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
And missing include for "perf/core.h" header, which provides LIBPERF_*
debug levels and add missing pr_err() support.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There's no point in exporting perf_evsel__init()/perf_evlist__init(),
it's called from perf_evsel__new()/perf_evlist__new() respectively.
It's used only from perf where perf_evsel()/perf_evlist() is embedded
perf's evsel/evlist.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Keep the count of failed tests, so we get better output with failures,
like:
# make tests
...
running static:
- running test-cpumap.c...OK
- running test-threadmap.c...OK
- running test-evlist.c...FAILED test-evlist.c:53 failed to create evsel2
FAILED test-evlist.c:163 failed to create evsel2
FAILED test-evlist.c:287 failed count
FAILED (3)
- running test-evsel.c...OK
running dynamic:
- running test-cpumap.c...OK
- running test-threadmap.c...OK
- running test-evlist.c...FAILED test-evlist.c:53 failed to create evsel2
FAILED test-evlist.c:163 failed to create evsel2
FAILED test-evlist.c:287 failed count
FAILED (3)
- running test-evsel.c...OK
...
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add mmaping tests that generates prctl call on every cpu validates it
gets all the related events in ring buffer.
Committer testing:
# make -C tools/perf/lib tests
make: Entering directory '/home/acme/git/perf/tools/perf/lib'
LINK test-cpumap-a
LINK test-threadmap-a
LINK test-evlist-a
LINK test-evsel-a
LINK test-cpumap-so
LINK test-threadmap-so
LINK test-evlist-so
LINK test-evsel-so
running static:
- running test-cpumap.c...OK
- running test-threadmap.c...OK
- running test-evlist.c...OK
- running test-evsel.c...OK
running dynamic:
- running test-cpumap.c...OK
- running test-threadmap.c...OK
- running test-evlist.c...OK
- running test-evsel.c...OK
make: Leaving directory '/home/acme/git/perf/tools/perf/lib'
#
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
[ Added _GNU_SOURCE define for sched.h to get sched_[gs]et_affinity
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add mmaping tests that generates 100 prctl calls in monitored child
process and validates it gets 100 events in ring buffer.
Committer tests:
# make -C tools/perf/lib tests
make: Entering directory '/home/acme/git/perf/tools/perf/lib'
LINK test-cpumap-a
LINK test-threadmap-a
LINK test-evlist-a
LINK test-evsel-a
LINK test-cpumap-so
LINK test-threadmap-so
LINK test-evlist-so
LINK test-evsel-so
running static:
- running test-cpumap.c...OK
- running test-threadmap.c...OK
- running test-evlist.c...OK
- running test-evsel.c...OK
running dynamic:
- running test-cpumap.c...OK
- running test-threadmap.c...OK
- running test-evlist.c...OK
- running test-evsel.c...OK
make: Leaving directory '/home/acme/git/perf/tools/perf/lib'
#
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Both static and dynamic tests needs to link with libapi.a, because it's
using its functions. Also include path for libapi includes.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move the mask setup to perf_evlist__mmap_ops(), because it's the same on
both perf and libperf path.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move allocation of the mmap array into perf_evlist__mmap_ops::get, to
centralize the mmap allocation.
Also move nr_mmap setup to perf_evlist__mmap_ops so it's centralized and
shared by both perf and libperf mmap code.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add the perf_evlist__for_each_mmap() function and export it in the
perf/evlist.h header, so that the user can iterate through 'struct
perf_mmap' objects.
Add a internal perf_mmap__link() function to do the actual linking.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As there are several discussions for enabling perf breakpoint signal
testing on arm64 platform: arm64 needs to rely on single-step to execute
the breakpointed instruction and then reinstall the breakpoint exception
handler. But if we hook the breakpoint with a signal, the signal
handler will do the stepping rather than the breakpointed instruction,
this causes infinite loops as below:
Kernel space | Userspace
---------------------------------|--------------------------------
| __test_function() -> hit
| breakpoint
breakpoint_handler() |
`-> user_enable_single_step() |
do_signal() |
| sig_handler() -> Step one
| instruction and
| trap to kernel
single_step_handler() |
`-> reinstall_suspended_bps() |
| __test_function() -> hit
| breakpoint again and
| repeat up flow infinitely
As Will Deacon mentioned [1]: "that we require the overflow handler to
do the stepping on arm/arm64, which is relied upon by GDB/ptrace. The
hw_breakpoint code is a complete disaster so my preference would be to
rip out the perf part and just implement something directly in ptrace,
but it's a pretty horrible job". Though Will commented this on arm
architecture, but the comment also can apply on arm64 architecture.
For complete information, I searched online and found a few years back,
Wang Nan sent one patch 'arm64: Store breakpoint single step state into
pstate' [2]; the patch tried to resolve this issue by avoiding single
stepping in signal handler and defer to enable the signal stepping when
return to __test_function(). The fixing was not merged due to the
concern for missing to handle different usage cases.
Based on the info, the most feasible way is to skip Perf breakpoint
signal testing for arm64 and this could avoid the duplicate
investigation efforts when people see the failure. This patch skips
this case on arm64 platform, which is same with arm architecture.
[1] https://lkml.org/lkml/2018/11/15/205
[2] https://lkml.org/lkml/2015/12/23/477
Signed-off-by: Leo Yan <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Brajeswar Ghosh <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Souptick Joarder <[email protected]>
Cc: Will Deacon <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The arm architecture supports breakpoint accounting but it doesn't
support breakpoint overflow signal handling. The current code uses the
same checking helper, thus it disables both testings (bp_account and
bp_signal) for arm platform.
For handling two testings separately, this patch adds a dedicated
checking helper is_supported() for breakpoint accounting testing, thus
it allows supporting breakpoint accounting testing on arm platform; the
old helper test__bp_signal_is_supported() is only used to checking for
breakpoint overflow signal testing.
Signed-off-by: Leo Yan <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Brajeswar Ghosh <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Souptick Joarder <[email protected]>
Cc: Will Deacon <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A few headers are not needed and were introduced by copying from other
test file. This patch removes the needless headers for the breakpoint
accounting testing.
Signed-off-by: Leo Yan <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Brajeswar Ghosh <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Souptick Joarder <[email protected]>
Cc: Will Deacon <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There are some deprecated events listed by perf list. But we can't
remove them from perf list with ease because some old scripts may use
them.
Deprecated events are old names of renamed events. When an event gets
renamed the old name is kept around for some time and marked with
Deprecated. The newer Intel event lists in the tree already have these
headers.
So we need to keep them in the event list, but provide a new option to
show them. The new option is "--deprecated".
With this patch, the deprecated events are hidden by default but they
can be displayed when option "--deprecated" is enabled.
Signed-off-by: Jin Yao <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
With just what we need for the STUL_STRARRAY, i.e. the 'struct strarray'
pointer to be used, just like with syscall_arg_fmt->scnprintf() for the
other direction (number -> string).
With this all the strarrays that are associated with syscalls can be
used with '-e syscalls:sys_enter_SYSCALLNAME --filter', and soon will be
possible as well to use with the strace-like shorter form, with just the
syscall names, i.e. something like:
-e lseek/whence==END/
For now we have to use the longer form:
# perf trace -e syscalls:sys_enter_lseek
0.000 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR)
0.031 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR)
0.046 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR)
5003.528 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR)
5003.575 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR)
5003.593 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR)
10002.017 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR)
10002.051 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR)
10002.068 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR)
^C# perf trace -e syscalls:sys_enter_lseek --filter="whence!=CUR"
0.000 sshd/24476 syscalls:sys_enter_lseek(fd: 3, offset: 9032, whence: SET)
0.060 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 9032, whence: SET)
0.187 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 118632, whence: SET)
0.203 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 118632, whence: SET)
0.349 sshd/24476 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libcrypt.so.2.0.0>, offset: 61936, whence: SET)
^C#
And for those curious about what are those lseek(DSO, offset, SET), well, its the loader:
# perf trace -e syscalls:sys_enter_lseek/max-stack=16/ --filter="whence!=CUR"
0.000 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 9032, whence: SET)
__libc_lseek64 (/usr/lib64/ld-2.29.so)
_dl_map_object (/usr/lib64/ld-2.29.so)
0.067 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 9032, whence: SET)
__libc_lseek64 (/usr/lib64/ld-2.29.so)
_dl_map_object_from_fd (/usr/lib64/ld-2.29.so)
_dl_map_object (/usr/lib64/ld-2.29.so)
0.198 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 118632, whence: SET)
__libc_lseek64 (/usr/lib64/ld-2.29.so)
_dl_map_object (/usr/lib64/ld-2.29.so)
0.219 sshd/24495 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libgcrypt.so.20.2.5>, offset: 118632, whence: SET)
__libc_lseek64 (/usr/lib64/ld-2.29.so)
_dl_map_object_from_fd (/usr/lib64/ld-2.29.so)
_dl_map_object (/usr/lib64/ld-2.29.so)
^C#
:-)
With this we can use strings in strarrays in filters, which allows us to
reuse all these that are in place for syscalls:
$ find tools/perf/trace/beauty/ -name "*.c" | xargs grep -w DEFINE_STRARRAY
tools/perf/trace/beauty/fcntl.c: static DEFINE_STRARRAY(fcntl_setlease, "F_");
tools/perf/trace/beauty/mmap.c: static DEFINE_STRARRAY(mmap_flags, "MAP_");
tools/perf/trace/beauty/mmap.c: static DEFINE_STRARRAY(madvise_advices, "MADV_");
tools/perf/trace/beauty/sync_file_range.c: static DEFINE_STRARRAY(sync_file_range_flags, "SYNC_FILE_RANGE_");
tools/perf/trace/beauty/socket.c: static DEFINE_STRARRAY(socket_ipproto, "IPPROTO_");
tools/perf/trace/beauty/mount_flags.c: static DEFINE_STRARRAY(mount_flags, "MS_");
tools/perf/trace/beauty/pkey_alloc.c: static DEFINE_STRARRAY(pkey_alloc_access_rights, "PKEY_");
tools/perf/trace/beauty/sockaddr.c:DEFINE_STRARRAY(socket_families, "PF_");
tools/perf/trace/beauty/tracepoints/x86_irq_vectors.c:static DEFINE_STRARRAY(x86_irq_vectors, "_VECTOR");
tools/perf/trace/beauty/tracepoints/x86_msr.c:static DEFINE_STRARRAY(x86_MSRs, "MSR_");
tools/perf/trace/beauty/prctl.c: static DEFINE_STRARRAY(prctl_options, "PR_");
tools/perf/trace/beauty/prctl.c: static DEFINE_STRARRAY(prctl_set_mm_options, "PR_SET_MM_");
tools/perf/trace/beauty/fspick.c: static DEFINE_STRARRAY(fspick_flags, "FSPICK_");
tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(ioctl_tty_cmd, "");
tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(drm_ioctl_cmds, "");
tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(sndrv_pcm_ioctl_cmds, "");
tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(sndrv_ctl_ioctl_cmds, "");
tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(kvm_ioctl_cmds, "");
tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(vhost_virtio_ioctl_cmds, "");
tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(vhost_virtio_ioctl_read_cmds, "");
tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(perf_ioctl_cmds, "");
tools/perf/trace/beauty/ioctl.c: static DEFINE_STRARRAY(usbdevfs_ioctl_cmds, "");
tools/perf/trace/beauty/fsmount.c: static DEFINE_STRARRAY(fsmount_attr_flags, "MOUNT_ATTR_");
tools/perf/trace/beauty/renameat.c: static DEFINE_STRARRAY(rename_flags, "RENAME_");
tools/perf/trace/beauty/kcmp.c: static DEFINE_STRARRAY(kcmp_types, "KCMP_");
tools/perf/trace/beauty/move_mount.c: static DEFINE_STRARRAY(move_mount_flags, "MOVE_MOUNT_");
$
Well, some, as the mmap flags are like:
$ tools/perf/trace/beauty/mmap_flags.sh
static const char *mmap_flags[] = {
[ilog2(0x40) + 1] = "32BIT",
[ilog2(0x01) + 1] = "SHARED",
[ilog2(0x02) + 1] = "PRIVATE",
[ilog2(0x10) + 1] = "FIXED",
[ilog2(0x20) + 1] = "ANONYMOUS",
[ilog2(0x008000) + 1] = "POPULATE",
[ilog2(0x010000) + 1] = "NONBLOCK",
[ilog2(0x020000) + 1] = "STACK",
[ilog2(0x040000) + 1] = "HUGETLB",
[ilog2(0x080000) + 1] = "SYNC",
[ilog2(0x100000) + 1] = "FIXED_NOREPLACE",
[ilog2(0x0100) + 1] = "GROWSDOWN",
[ilog2(0x0800) + 1] = "DENYWRITE",
[ilog2(0x1000) + 1] = "EXECUTABLE",
[ilog2(0x2000) + 1] = "LOCKED",
[ilog2(0x4000) + 1] = "NORESERVE",
};
$
So we'll need a strarray__strtoul_flags() that will break donw the flags
into tokens separated by '|' before doing the lookup and then go on
reconstructing the value from, say:
# perf trace -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|FIXED|DENYWRITE"
into:
# perf trace -e syscalls:sys_enter_mmap --filter="flags==0x2|0x10|0x0800"
and finally into:
# perf trace -e syscalls:sys_enter_mmap --filter="flags==0x812"
That is what we see if we don't use the augmented view obtained from:
# perf trace -e mmap
<SNIP>
211792.885 procmail/15393 mmap(addr: 0x7fcd11645000, len: 8192, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 8, off: 0xa000) = 0x7fcd11645000
<SNIP>
But plain use tracefs:
procmail-15559 [000] .... 54557.178262: sys_mmap(addr: 7f5c9bf7a000, len: 9b000, prot: 1, flags: 812, fd: 3, off: a9000)
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Brendan Gregg <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Even though gup_benchmark.c has code to handle the -w command-line option,
the "w" is not part of the getopt string. It looks as if it has been
missing the whole time.
On my machine, this leads naturally to the following predictable result:
$ sudo ./gup_benchmark -w
./gup_benchmark: invalid option -- 'w'
...which is fixed with this commit.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: John Hubbard <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: "Aneesh Kumar K . V" <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: kbuild test robot <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Out of the three nc implementations widely in use, at least two (BSD netcat
and nmap-ncat) do not support -l combined with -s. Modify the nc invocation
to be accepted by all of them.
Fixes: 7df5e3db8f63 ("selftests: bpf: tc-bpf flow shaping with EDT")
Signed-off-by: Jiri Benc <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Peter Oskolkov <[email protected]>
Link: https://lore.kernel.org/bpf/f5bf07dccd8b552a76c84d49e80b86c5aa071122.1571400024.git.jbenc@redhat.com
|
|
With commit "libbpf: stop enforcing kern_version,..." we removed the
kernel version section parsing in favor of querying for the kernel
using uname() and populating the version using the result of the
query. After this any version sections were simply ignored.
Unfortunately, the world of kernels is not so friendly. I've found some
customized kernels where uname() does not match the in kernel version.
To fix this so programs can load in this environment this patch adds
back parsing the section and if it exists uses the user specified
kernel version to override the uname() result. However, keep most the
kernel uname() discovery bits so users are not required to insert the
version except in these odd cases.
Fixes: 5e61f27070292 ("libbpf: stop enforcing kern_version, populate it for users")
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/157140968634.9073.6407090804163937103.stgit@john-XPS-13-9370
|
|
Return the maximum number of tc flower filters that can be offloaded.
Currently, this value corresponds to the number of counters supported by
the driver.
Signed-off-by: Danielle Ratson <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add resource_scale test suitable for Spectrum-2.
Invoke the mirror_gre test and check that the advertised scale numbers
are indeed supported.
Signed-off-by: Danielle Ratson <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Like in Spectrum, use the number of analyzers taken from the devlink
command.
Signed-off-by: Danielle Ratson <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use the number of analyzers taken from the devlink command, instead of
hard-coded value, in order to make the test more generic.
Signed-off-by: Danielle Ratson <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We were doing this only at the sys_exit syscall tracepoint, as for
strace-like we count the pair of sys_enter and sys_exit as one event,
but when asking specifically for a the syscalls:sys_enter_NAME
tracepoint we need to count each of those as an event.
I.e. things like:
# perf trace --max-events=4 -e syscalls:sys_enter_lseek
0.000 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR)
0.034 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR)
0.051 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR)
2307.900 sshd/30800 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libsystemd.so.0.25.0>, offset: 9032, whence: SET)
#
Were going on forever, since we only had sys_enter events.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To go from strarrays strings to its indexes.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
trace_find_next_event() was buggy and pretty much a useless helper. As
there are no more users, just remove it.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Tzvetomir Stoyanov <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Instead of calling a useless (and broken) helper function to get the
next event of a tep event array, just get the array directly and iterate
over it.
Note, the broken part was from trace_find_next_event() which after this
will no longer be used, and can be removed.
Committer notes:
This fixes a segfault when generating python scripts from perf.data
files with multiple tracepoint events, i.e. the following use case is
fixed by this patch:
# perf record -e sched:* sleep 1
[ perf record: Woken up 31 times to write data ]
[ perf record: Captured and wrote 0.031 MB perf.data (9 samples) ]
# perf script -g python
Segmentation fault (core dumped)
#
Reported-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Tzvetomir Stoyanov <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
From the syscall_fmts->arg entries for formatting strace-like syscalls.
This is when resolving the string "whence" on a filter expression for
the syscalls:sys_enter_lseek:
Breakpoint 3, perf_evsel__syscall_arg_fmt (evsel=0xc91ed0, arg=0x7fffffff7cd0 "whence") at builtin-trace.c:3626
3626 {
(gdb) n
3628 struct syscall_arg_fmt *fmt = __evsel__syscall_arg_fmt(evsel);
(gdb) n
3630 if (evsel->tp_format == NULL || fmt == NULL)
(gdb) n
3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt)
(gdb) n
3634 if (strcmp(field->name, arg) == 0)
(gdb) p field->name
$3 = 0xc945e0 "__syscall_nr"
(gdb) n
3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt)
(gdb) p *fmt
$4 = {scnprintf = 0x0, strtoul = 0x0, mask_val = 0x0, parm = 0x0, name = 0x0, nr_entries = 0, show_zero = false}
(gdb) n
3634 if (strcmp(field->name, arg) == 0)
(gdb) p field->name
$5 = 0xc94690 "fd"
(gdb) n
3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt)
(gdb) n
3634 if (strcmp(field->name, arg) == 0)
(gdb) n
3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt)
(gdb) n
3634 if (strcmp(field->name, arg) == 0)
(gdb) p *fmt
$9 = {scnprintf = 0x489be2 <syscall_arg__scnprintf_strarray>, strtoul = 0x0, mask_val = 0x0, parm = 0xa2da80 <strarray.whences>, name = 0x0,
nr_entries = 0, show_zero = false}
(gdb) p field->name
$10 = 0xc947b0 "whence"
(gdb) p fmt->parm
$11 = (void *) 0xa2da80 <strarray.whences>
(gdb) p *(struct strarray *)fmt->parm
$12 = {offset = 0, nr_entries = 5, prefix = 0x724d37 "SEEK_", entries = 0xa2da40 <whences>}
(gdb) p (struct strarray *)fmt->parm)->entries
Junk after end of expression.
(gdb) p ((struct strarray *)fmt->parm)->entries
$13 = (const char **) 0xa2da40 <whences>
(gdb) p ((struct strarray *)fmt->parm)->entries[0]
$14 = 0x724d21 "SET"
(gdb) p ((struct strarray *)fmt->parm)->entries[1]
$15 = 0x724d25 "CUR"
(gdb) p ((struct strarray *)fmt->parm)->entries[2]
$16 = 0x724d29 "END"
(gdb) p ((struct strarray *)fmt->parm)->entries[2]
$17 = 0x724d29 "END"
(gdb) p ((struct strarray *)fmt->parm)->entries[3]
$18 = 0x724d2d "DATA"
(gdb) p ((struct strarray *)fmt->parm)->entries[4]
$19 = 0x724d32 "HOLE"
(gdb)
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For kernel logging macro, pr_warning is completely removed and
replaced by pr_warn, using pr_warn in tools lib api for symmetry
to kernel logging macro, then we could drop pr_warning in the
whole linux code.
Changing __pr_warning to __pr_warn to be consistent.
Link: http://lkml.kernel.org/r/[email protected]
To: [email protected]
Cc: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Kefeng Wang <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
|
|
For syscalls we need to cache the 'syscall_id' and 'ret' field offsets
but as well have a pointer to the syscall_fmt_arg array for the fields,
so that we can expand strings in filter expressions, so introduce
a 'struct evsel_trace' to have in evsel->priv that allows for that.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Next step will be to have a 'struct evsel_trace' to allow for handling
the syscalls tracepoints via the strace-like code while reusing parts of
that code with the other tracepoints, where we don't have things like
the 'syscall_nr' or 'ret' ((raw_)?syscalls:sys_{enter,exit}(_SYSCALL)?)
args that we want to cache offsets and have been using evsel->priv for
that, while for the other tracepoints we'll have just an array of
'struct syscall_arg_fmt' (i.e. ->scnprint() for number->string and
->strtoul() string->number conversions and other state those functions
need).
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We're using evsel->priv in syscalls:sys_{enter,exit}_SYSCALL and in
raw_syscalls:sys_{enter,exit} to cache the offset of the common fields,
the multiplexor id/syscall_id in the sys_enter case and syscall_id + ret
for sys_exit.
And for the rest of the tracepoints we use it to have a syscall_arg_fmt
array to have scnprintf/strtoul for tracepoint args.
So we better clearly mark them with accessors so that we can move to
having a 'struct evsel_trace' struct for all 'perf trace' specific
evsel->priv usage.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
expression
It was there, but as pr_debug(), make it pr_err() so that we can see it
without -v:
# trace -e syscalls:*lseek --filter="whenc==SET" sleep 1
"whenc" not found in "syscalls:sys_enter_lseek", can't set filter "whenc==SET"
#
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Decode Xen and KVM's emulate-prefix signature by x86 insn decoder.
It is called "prefix" but actually not x86 instruction prefix, so
this adds insn.emulate_prefix_size field instead of reusing
insn.prefixes.
If x86 decoder finds a special sequence of instructions of
XEN_EMULATE_PREFIX and 'ud2a; .ascii "kvm"', it just counts the
length, set insn.emulate_prefix_size and fold it with the next
instruction. In other words, the signature and the next instruction
is treated as a single instruction.
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: [email protected]
Cc: Boris Ostrovsky <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: [email protected]
Cc: Randy Dunlap <[email protected]>
Link: https://lkml.kernel.org/r/156777564986.25081.4964537658500952557.stgit@devnote2
|
|
test_progs is much more sophisticated superset of tests compared to
test_libbpf.sh and test_libbpf_open. Remove test_libbpf.sh and
test_libbpf_open.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
test_queue_stack_map.h is used only from BPF programs. Thus it should be
part of progs/ subdir. An added benefit of moving it there is that new
TEST_RUNNER_DEFINE_RULES macro-rule will properly capture dependency on
this header for all BPF objects and trigger re-build, if it changes.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Define test runner generation meta-rule that codifies dependencies
between test runner, its tests, and its dependent BPF programs. Use that
for defining test_progs and test_maps test-runners. Also additionally define
2 flavors of test_progs:
- alu32, which builds BPF programs with 32-bit registers codegen;
- bpf_gcc, which build BPF programs using GCC, if it supports BPF target.
Overall, this is accomplished through $(eval)'ing a set of generic
rules, which defines Makefile targets dynamically at runtime. See
comments explaining the need for 2 $(evals), though.
For each test runner we have (test_maps and test_progs, currently), and,
optionally, their flavors, the logic of build process is modeled as
follows (using test_progs as an example):
- all BPF objects are in progs/:
- BPF object's .o file is built into output directory from
corresponding progs/.c file;
- all BPF objects in progs/*.c depend on all progs/*.h headers;
- all BPF objects depend on bpf_*.h helpers from libbpf (but not
libbpf archive). There is an extra rule to trigger bpf_helper_defs.h
(re-)build, if it's not present/outdated);
- build recipe for BPF object can be re-defined per test runner/flavor;
- test files are built from prog_tests/*.c:
- all such test file objects are built on individual file basis;
- currently, every single test file depends on all BPF object files;
this might be improved in follow up patches to do 1-to-1 dependency,
but allowing to customize this per each individual test;
- each test runner definition can specify a list of extra .c and .h
files to be built along test files and test runner binary; all such
headers are becoming automatic dependency of each test .c file;
- due to test files sometimes embedding (using .incbin assembly
directive) contents of some BPF objects at compilation time, which are
expected to be in CWD of compiler, compilation for test file object does
cd into test runner's output directory; to support this mode all the
include paths are turned into absolute paths using $(abspath) make
function;
- prog_tests/test.h is automatically (re-)generated with an entry for
each .c file in prog_tests/;
- final test runner binary is linked together from test object files and
extra object files, linking together libbpf's archive as well;
- it's possible to specify extra "resource" files/targets, which will be
copied into test runner output directory, if it differes from
Makefile-wide $(OUTPUT). This is used to ensure btf_dump test cases and
urandom_read binary is put into a test runner's CWD for tests to find
them in runtime.
For flavored test runners, their output directory is a subdirectory of
common Makefile-wide $(OUTPUT) directory with flavor name used as
subdirectory name.
BPF objects targets might be reused between different test runners, so
extra checks are employed to not double-define them. Similarly, we have
redefinition guards for output directories and test headers.
test_verifier follows slightly different patterns and is simple enough
to not justify generalizing TEST_RUNNER_DEFINE/TEST_RUNNER_DEFINE_RULES
further to accomodate these differences. Instead, rules for
test_verifier are minimized and simplified, while preserving correctness
of dependencies.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Currently it's impossible to do `make test_progs` and have only
test_progs be built, because all the binary targets are defined in terms
of $(OUTPUT)/<binary>, and $(OUTPUT) is absolute path to current
directory (or whatever gets overridden to by user).
This patch adds simple re-directing targets for all test targets making
it possible to do simple and nice `make test_progs` (and any other
target).
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Make test_maps use tests.h header format consistent with the one used by
test_progs, to facilitate unification.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
test_core_reloc_kernel test captures its own process name and validates
it as part of the test. Given extra "flavors" of test_progs, this break
for anything by default test_progs binary. Fix the test to cut out
flavor part of the process name.
Fixes: ee2eb063d330 ("selftests/bpf: Add BPF_CORE_READ and BPF_CORE_READ_STR_INTO macro tests")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
We are building a bunch of "flavors" of test_progs, e.g., w/ alu32 flag
for Clang when building BPF object. test_progs setup is relying on
having all the BPF object files and extra resources to be available in
current working directory, though. But we actually build all these files
into a separate sub-directory. Next set of patches establishes
convention of naming "flavored" test_progs (and test runner binaries in
general) as test_progs-flavor (e.g., test_progs-alu32), for each such
extra flavor. This patch teaches test_progs binary to automatically
detect its own extra flavor based on its argv[0], and if present, to
change current directory to a flavor-specific subdirectory.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
flow_dissector_reattach test changes the netns we run in but does not
restore it to the one we started in when finished. This interferes with
tests that run after it. Fix it by restoring the netns when done.
Fixes: f97eea1756f3 ("selftests/bpf: Check that flow dissector can be re-attached")
Reported-by: Alexei Starovoitov <[email protected]>
Reported-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Load basic cls_bpf program.
Load raw_tracepoint program and attach to kfree_skb raw tracepoint.
Trigger cls_bpf via prog_test_run.
At the end of test_run kernel will call kfree_skb
which will trigger trace_kfree_skb tracepoint.
Which will call our raw_tracepoint program.
Which will take that skb and will dump it into perf ring buffer.
Check that user space received correct packet.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Introduce new helper that reuses existing skb perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct sk_buff *' as tracepoint argument or
can walk other kernel data structures to skb pointer.
In order to do that teach verifier to resolve true C types
of bpf helpers into in-kernel BTF ids.
The type of kernel pointer passed by raw tracepoint into bpf
program will be tracked by the verifier all the way until
it's passed into helper function.
For example:
kfree_skb() kernel function calls trace_kfree_skb(skb, loc);
bpf programs receives that skb pointer and may eventually
pass it into bpf_skb_output() bpf helper which in-kernel is
implemented via bpf_skb_event_output() kernel function.
Its first argument in the kernel is 'struct sk_buff *'.
The verifier makes sure that types match all the way.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
It's a responsiblity of bpf program author to annotate the program
with SEC("tp_btf/name") where "name" is a valid raw tracepoint.
The libbpf will try to find "name" in vmlinux BTF and error out
in case vmlinux BTF is not available or "name" is not found.
If "name" is indeed a valid raw tracepoint then in-kernel BTF
will have "btf_trace_##name" typedef that points to function
prototype of that raw tracepoint. BTF description captures
exact argument the kernel C code is passing into raw tracepoint.
The kernel verifier will check the types while loading bpf program.
libbpf keeps BTF type id in expected_attach_type, but since
kernel ignores this attribute for tracing programs copy it
into attach_btf_id attribute before loading.
Later the kernel will use prog->attach_btf_id to select raw tracepoint
during bpf_raw_tracepoint_open syscall command.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add attach_btf_id attribute to prog_load command.
It's similar to existing expected_attach_type attribute which is
used in several cgroup based program types.
Unfortunately expected_attach_type is ignored for
tracing programs and cannot be reused for new purpose.
Hence introduce attach_btf_id to verify bpf programs against
given in-kernel BTF type id at load time.
It is strictly checked to be valid for raw_tp programs only.
In a later patches it will become:
btf_id == 0 semantics of existing raw_tp progs.
btd_id > 0 raw_tp with BTF and additional type safety.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Test that the fdinfo field of a pidfd referring to a dead process
correctly shows Pid: -1 and NSpid: -1.
Cc: Christian Kellner <[email protected]>
Cc: [email protected]
Reviewed-by: Christian Kellner <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|