aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2011-02-16perf annotate browser: Use the percent color for the whole lineArnaldo Carvalho de Melo1-2/+3
Not just for the percentage number, to see the hot lines more easily. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-16perf annotate: Check if offset is less than symbol sizeArnaldo Carvalho de Melo1-1/+2
Just like done on symbol__inc_addr_samples to catch misparsed offsets from objdump. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-16perf ui: Serialize screen updatesArnaldo Carvalho de Melo5-1/+23
The ui operations so far were used by just one thread, but 'perf top --tui' now has two threads updating the screen, so we need to use a mutex to avoid garbling the screen. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-16perf tool: Add cgroup supportStephane Eranian9-10/+276
This patch adds the ability to filter monitoring based on container groups (cgroups) for both perf stat and perf record. It is possible to monitor multiple cgroup in parallel. There is one cgroup per event. The cgroups to monitor are passed via a new -G option followed by a comma separated list of cgroup names. The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool finds the corresponding directory in the cgroup filesystem and opens it. It then passes that file descriptor to the kernel. Example: $ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1 Performance counter stats for 'sleep 1': 2,368,667,414 cycles test1 2,369,661,459 cycles <not counted> cycles test2 1.001856890 seconds time elapsed Signed-off-by: Stephane Eranian <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2011-02-16Merge branch 'perf/urgent' into perf/coreIngo Molnar1-102/+98
Merge reason: we need to queue up dependent patch Signed-off-by: Ingo Molnar <[email protected]>
2011-02-15Merge branch 'tools-release' of ↵Linus Torvalds1-102/+98
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: tools: turbostat: style updates tools: turbostat: fix bitwise and operand
2011-02-11perf report: Fix initializion of annotate symbol priv areaArnaldo Carvalho de Melo1-1/+3
We only allocate it when in TUI mode. In --stdio mode unconditionally initializing this area leads to memory corruption. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-11Merge remote branch 'acme/perf/urgent' into perf/coreArnaldo Carvalho de Melo4-12/+23
Fixups due to rename of event_t routines from event__ to perf_event__ done in perf/core. Conflicts: tools/perf/builtin-record.c tools/perf/builtin-top.c tools/perf/util/event.c tools/perf/util/event.h Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-10tools: turbostat: style updatesLen Brown1-100/+96
Follow kernel coding style traditions more closely. Delete typedef, re-name "per cpu counters" to simply be counters etc. This patch changes no functionality. Suggested-by: Thiago Farina <[email protected]> Signed-off-by: Len Brown <[email protected]>
2011-02-10tools: turbostat: fix bitwise and operandThomas Renninger1-2/+2
bug could cause false positive on indicating presence of invarient TSC or APERF support. Signed-off-by: Thomas Renninger <[email protected]> Signed-off-by: Len Brown <[email protected]>
2011-02-10perf tools: Fix thread_map event synthesizing in top and recordArnaldo Carvalho de Melo4-10/+20
Jeff Moyer reported these messages: Warning: ... trying to fall back to cpu-clock-ticks couldn't open /proc/-1/status couldn't open /proc/-1/maps [ls output] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.008 MB perf.data (~363 samples) ] That lead me and David Ahern to see that something was fishy on the thread synthesizing routines, at least for the case where the workload is started from 'perf record', as -1 is the default for target_tid in 'perf record --tid' parameter, so somehow we were trying to synthesize the PERF_RECORD_MMAP and PERF_RECORD_COMM events for the thread -1, a bug. So I investigated this and noticed that when we introduced support for recording a process and its threads using --pid some bugs were introduced and that the way to fix it was to instead of passing the target_tid to the event synthesizing routines we should better pass the thread_map that has the list of threads for a --pid or just the single thread for a --tid. Checked in the following ways: On a 8-way machine run cyclictest: [root@emilia ~]# perf record cyclictest -a -t -n -p99 -i100 -d50 policy: fifo: loadavg: 0.00 0.13 0.31 2/139 28798 T: 0 (28791) P:99 I:100 C: 25072 Min: 4 Act: 5 Avg: 6 Max: 122 T: 1 (28792) P:98 I:150 C: 16715 Min: 4 Act: 6 Avg: 5 Max: 27 T: 2 (28793) P:97 I:200 C: 12534 Min: 4 Act: 5 Avg: 4 Max: 8 T: 3 (28794) P:96 I:250 C: 10028 Min: 4 Act: 5 Avg: 5 Max: 96 T: 4 (28795) P:95 I:300 C: 8357 Min: 5 Act: 6 Avg: 5 Max: 12 T: 5 (28796) P:94 I:350 C: 7163 Min: 5 Act: 6 Avg: 5 Max: 12 T: 6 (28797) P:93 I:400 C: 6267 Min: 4 Act: 5 Avg: 5 Max: 9 T: 7 (28798) P:92 I:450 C: 5571 Min: 4 Act: 5 Avg: 5 Max: 9 ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.108 MB perf.data (~4719 samples) ] [root@emilia ~]# This will create one extra thread per CPU: [root@emilia ~]# tuna -t cyclictest -CP thread ctxt_switches pid SCHED_ rtpri affinity voluntary nonvoluntary cmd 28825 OTHER 0 0xff 2169 671 cyclictest 28832 FIFO 93 6 52338 1 cyclictest 28833 FIFO 92 7 46524 1 cyclictest 28826 FIFO 99 0 209360 1 cyclictest 28827 FIFO 98 1 139577 1 cyclictest 28828 FIFO 97 2 104686 0 cyclictest 28829 FIFO 96 3 83751 1 cyclictest 28830 FIFO 95 4 69794 1 cyclictest 28831 FIFO 94 5 59825 1 cyclictest [root@emilia ~]# So we should expect only samples for the above 9 threads when using the --dump-raw-trace|-D perf report switch to look at the column with the tid: [root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c 629 28825 110 28826 491 28827 308 28828 198 28829 621 28830 225 28831 203 28832 89 28833 [root@emilia ~]# So for workloads started by 'perf record' seems to work, now for existing workloads, just run cyclictest first, without 'perf record': [root@emilia ~]# tuna -t cyclictest -CP thread ctxt_switches pid SCHED_ rtpri affinity voluntary nonvoluntary cmd 28859 OTHER 0 0xff 594 200 cyclictest 28864 FIFO 95 4 16587 1 cyclictest 28865 FIFO 94 5 14219 1 cyclictest 28866 FIFO 93 6 12443 0 cyclictest 28867 FIFO 92 7 11062 1 cyclictest 28860 FIFO 99 0 49779 1 cyclictest 28861 FIFO 98 1 33190 1 cyclictest 28862 FIFO 97 2 24895 1 cyclictest 28863 FIFO 96 3 19918 1 cyclictest [root@emilia ~]# and then later did: [root@emilia ~]# perf record --pid 28859 sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.027 MB perf.data (~1195 samples) ] [root@emilia ~]# To collect 3 seconds worth of samples for pid 28859 and its children: [root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c 15 28859 33 28860 19 28861 13 28862 13 28863 10 28864 11 28865 9 28866 255 28867 [root@emilia ~]# Works, last thing is to check if looking at just one of those threads also works: [root@emilia ~]# perf record --tid 28866 sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.006 MB perf.data (~242 samples) ] [root@emilia ~]# perf report -D | grep RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort | uniq -c 3 28866 [root@emilia ~]# Works too. Reported-by: Jeff Moyer <[email protected]> Cc: David Ahern <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jeff Moyer <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-08trivial: Fix Steven's Copyright typosUwe Kleine-König1-1/+1
OK, the copyright allows you to write a copy, still I think the lawyers prefer the correct spelling. Signed-off-by: Uwe Kleine-König <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Steven Rostedt <[email protected]>
2011-02-08perf annotate: Fix annotate context lines regressionArnaldo Carvalho de Melo3-9/+43
The live annotation done in 'perf top' needs to limit the context before lines that aren't filtered out by the min percent filter, if we don't do that, the screen in a tty often is not enough for showing what is interesting: lines with hits and a few source code lines before it. Reported-by: Mike Galbraith <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-08perf annotate: Move locking to struct annotationArnaldo Carvalho de Melo9-111/+126
Since we'll need it when implementing the live annotate TUI browser. This also simplifies things a bit by having the list head for the source code to be in the dynamicly allocated part of struct annotation, that way we don't have to pass it around, it can be found from the struct symbol that is passed everywhere. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-08perf annotate: Fix --stdio renderingArnaldo Carvalho de Melo1-2/+2
The checks for not using a max_lines parameter were b0rked, problem introduced in 3653246. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-07perf probe: Add bitfield member supportMasami Hiramatsu1-27/+68
Add bitfield member accessing support to probe arguments. Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: [email protected] Cc: Ingo Molnar <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Srikar Dronamraju <[email protected]> Cc: Steven Rostedt <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> [ committer note: Fixed up '%lu' use for return of BYTES_TO_BITS ('%zd') ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-07perf annotate: Fix build errorBorislav Petkov1-1/+1
A small fix for when NO_NEWT_SUPPORT is defined. Add a missing "struct" to the function prototype. Cc: Frederic Weisbecker <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-07perf tool: Fix gcc 4.6.0 issuesKyle McMartin9-21/+11
GCC 4.6.0 in Fedora rawhide turned up some compile errors in tools/perf due to the -Werror=unused-but-set-variable flag. I've gone through and annotated some of the assignments that had side effects (ie: return value from a function) with the __used annotation, and in some cases, just removed unused code. In a few cases, we were assigning something useful, but not using it in later parts of the function. kyle@dreadnought:~/src% gcc --version gcc (GCC) 4.6.0 20110122 (Red Hat 4.6.0-0.3) Cc: Ingo Molnar <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Kyle McMartin <[email protected]> [ committer note: Fixed up the annotation fixes, as that code moved recently ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-07perf probe: Rewrite find_lazy_match_lines() by using getline(3)Franck Bui-Huu1-44/+28
Acked-by: Masami Hiramatsu <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: lkml <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Franck Bui-Huu <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-07perf top: Use pid_t for target_{pid|tid}Denis Kirjanov1-2/+2
Use pid_t data type for target_{pid|tid} vars. Cc: Ingo Molnar <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Denis Kirjanov <[email protected]> [ committer note: those variables are now in struct perf_top, fixed ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-07perf tools: Makefile: Use $(QUIET_GEN) for perf.soMichael Witten1-1/+1
So that we get this: CC /home/acme/git/build/perf/bench/mem-memcpy-x86-64-asm.o GEN perf-archive * GEN /home/acme/git/build/perf/python/perf.so CC /home/acme/git/build/perf/builtin-annotate.o Instead of silently building the python binding. LKML-Reference: <[email protected]> Signed-off-by: Michael Witten <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-07Merge branch 'perf/core' of ↵Ingo Molnar12-688/+769
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core
2011-02-07Merge branch 'linus' into perf/coreIngo Molnar1-1/+1
Merge reason: Pick up perf fixes that are now upstream Signed-off-by: Ingo Molnar <[email protected]>
2011-02-06perf top: Ditch private annotation code, share perf annotate'sArnaldo Carvalho de Melo4-173/+106
Next step: Live TUI annotation in perf top, just press enter on a symbol line. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-06perf annotate: Separate objdump parsing from actual screen renderingArnaldo Carvalho de Melo2-19/+47
Because in 'perf top' we'll need to parse just once and then, as samples come, render multiple times with evolving counter values. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-05perf annotate: Config options for symbol__tty_annotateArnaldo Carvalho de Melo3-6/+13
Max line# that should be printed, minimum percentage filter, just like 'perf top', alas, due to it :-) Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-05perf annotate: Support multiple histograms in annotationArnaldo Carvalho de Melo8-65/+106
The perf annotate tool continues aggregating everything on just one histograms, but to support the top model add support for one histogram perf evsel in the evlist. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-05perf annotate: Move annotate functions to util/Arnaldo Carvalho de Melo8-503/+578
They will be used by perf top, so that we have just one set of routines to do annotation. Rename "struct sym_priv" to "struct annotation", etc, to clarify this code a bit. Rename "struct sym_ext" to "struct source_line", to give it a meaningful name, that clarifies that it is a the result of an addr2line call, that is sorted by percentage one particular source code line appeared in the annotation. And since we're moving things around also rename 'sym_hist->ip' to 'sym_hist->addr' as we want to do data structure annotation at some point. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-05perf top: Remove superfluous name_len fieldArnaldo Carvalho de Melo3-6/+3
From the sym_entry struct, struct symbol already has this field. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-03perf stat: Fix aggreate counter reading accountingArnaldo Carvalho de Melo1-1/+1
Introduced in: c52b12ed, when this sequence: count[0] = count[1] = count[2] = 0; Was replaced with: aggr->val = 0; Which is equivalent to zeroing just the first entry in the 'count' array. Fix it by zeroing the three entries with: aggr->val = aggr->ena = aggr->run = 0; Reported-by: Ingo Molnar <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-01perf top: Fix TUI compilationYinghai Lu1-3/+3
> + slsmg_write_nstring(width >= syme->map->dso->long_name_len ? > + syme->map->dso->long_name : > + syme->map->dso->short_name, width); need update macro for that calling util/ui/browsers/top.c: In function ‘perf_top_browser__write’: util/ui/browsers/top.c:60:2: error: cast to pointer from integer of different size util/ui/browsers/top.c:60:2: error: comparison between pointer and integer util/ui/browsers/top.c:60:2: error: passing argument 1 of ‘SLsmg_write_nstring’ discards qualifiers from pointer target type /usr/include/slang.h:1728:16: note: expected ‘char *’ but argument is of type ‘const char *’ make: *** [util/ui/browsers/top.o] Error 1 Cc: Frederic Weisbecker <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Yinghai Lu <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-01perf tools: Don't try to build python bindings if Python.h not availableArnaldo Carvalho de Melo1-3/+5
Just leverage the test done for python support in 'python script', emitting a warning about losing those features if python-dev[el] is not installed. Reported-by: Peter Zijlstra <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-01perf stat: Fix up resource release orderArnaldo Carvalho de Melo1-2/+2
That was causing a SEGV on selected old distros. Problem introduced in 7e2ed09. Reported-by: Peter Zijlstra <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-01perf tools: Fix up 'make clean' targetArnaldo Carvalho de Melo1-3/+1
It wasn't using $(OUTPUT) to rm *.o and there were some funny looking automake files that never get created but were being deleted anyway. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-02-01perf tools: Remove verbose build messages for the python bindingArnaldo Carvalho de Melo1-4/+8
Also now it builds it in a well known location: [acme@felicio linux]$ rm -rf ../build/perf/ [acme@felicio linux]$ mkdir ../build/perf [acme@felicio linux]$ make -j2 O=~acme/git/build/perf -C tools/perf/ <SNIP> [acme@felicio linux]$ ls -la ../build/perf/python/ total 152 -rwxrwxr-x 1 acme acme 147957 Feb 1 14:56 perf.so drwxrwxr-x 3 acme acme 17 Feb 1 14:56 temp [acme@felicio linux]$ [root@felicio ~]# strip ~acme/git/build/perf/python/perf.so [root@felicio ~]# ls -la ~acme/git/build/perf/python/perf.so -rwxrwxr-x 1 acme acme 46264 Feb 1 14:58 /home/acme/git/build/perf/python/perf.so [root@felicio ~]# export PYTHONPATH=~acme/git/build/perf/python/ [root@felicio ~]# ~acme/git/linux/tools/perf/python/twatch.py cpu: 0, pid: 7751, tid: 7751 { type: exit, pid: 7751, ppid: 7751, tid: 7751, ptid: 7751, time: 54562393512356} cpu: 0, pid: 13700, tid: 13700 { type: fork, pid: 7756, ppid: 13700, tid: 7756, ptid: 13700, time: 54562393746739} cpu: 1, pid: 7756, tid: 7756 { type: fork, pid: 7757, ppid: 7756, tid: 7757, ptid: 7756, time: 54562394246152} cpu: 1, pid: 7757, tid: 7757 { type: comm, pid: 7757, tid: 7757, comm: awk } cpu: 1, pid: 7757, tid: 7757 { type: exit, pid: 7757, ppid: 7757, tid: 7757, ptid: 7757, time: 54562395456813} Reported-by: Ingo Molnar <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-31perf python: Fix build on 32-bitArnaldo Carvalho de Melo2-27/+28
Where there are lots of errors related to python methods receiving 'char *' for things like file open mode, which break the build, also disable strict aliasing and fixup some other warnings. Now builds on both 32-bit and 64-bit fedora systems. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-31perf probe: Use %td for pointer arithmetic resultArnaldo Carvalho de Melo1-1/+1
%td is for ptrdiff_t, avoiding this warning on 32-bit: cc1: warnings being treated as errors builtin-probe.c: In function ‘opt_set_filter’: builtin-probe.c:176:4: error: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘int’ Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-31perf top: Introduce slang based TUIArnaldo Carvalho de Melo5-8/+189
Disabled by default as there are features found in the stdio based one that aren't implemented, like live annotation, filtering knobs data entry. Annotation hopefully will get somehow merged with the 'perf annotate' code. To use it: perf top --tui Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-31perf tools: Don't fallback to setup_pager unconditionallyArnaldo Carvalho de Melo4-7/+9
Because in tools like 'top' we don't want the pager. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-31perf top: Move display agnostic routines to util/top.[ch]Arnaldo Carvalho de Melo4-345/+418
Paving the way for a slang browser a la 'perf report --tui'. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-31perf evlist: Store pointer to the cpu and thread mapsArnaldo Carvalho de Melo8-119/+148
So that we don't have to pass it around to the several methods that needs it, simplifying usage. There is one case where we don't have the thread/cpu map in advance, which is in the parsing routines used by top, stat, record, that we have to wait till all options are parsed to know if a cpu or thread list was passed to then create those maps. For that case consolidate the cpu and thread map creation via perf_evlist__create_maps() out of the code in top and record, while also providing a perf_evlist__set_maps() for cases where multiple evlists share maps or for when maps that represent CPU sockets, for instance, get crafted out of topology information or subsets of threads in a particular application are to be monitored, providing more granularity in specifying which cpus and threads to monitor. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-30perf evlist: Move evlist methods to evlist.cArnaldo Carvalho de Melo4-139/+158
They were on evsel.c because they came from refactoring existing evsel methods, so, to make reviewing the changes easier, I kept it there, now its a plain move. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-30perf tools: Initial python bindingArnaldo Carvalho de Melo4-1/+966
First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-29perf tools: Kill event_t typedef, use 'union perf_event' insteadArnaldo Carvalho de Melo27-439/+475
And move the event_t methods to the perf_event__ too. No code changes, just namespace consistency. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-29perf tools: Rename 'struct sample_data' to 'struct perf_sample'Arnaldo Carvalho de Melo18-72/+72
Making the namespace more uniform. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-29perf top: Switch to non overwrite modeArnaldo Carvalho de Melo1-4/+9
Just like 'perf record'. Warn the user when PERF_RECORD_LOST events happen. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-29perf evlist: Support non overwrite mode in perf_evlist__read_on_cpuArnaldo Carvalho de Melo3-15/+22
I.e. stash the overwrite mode in struct perf_evlist and act accordingly in perf_evlist__read_on_cpu, not checking for overwrites and touching the tail after consuming one event, like perf record does, for instance. Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-29perf events: Account PERF_RECORD_LOST events in event__processArnaldo Carvalho de Melo1-0/+2
Right now this function is only used by perf top, that uses PROT_READ only, i.e. overwrite mode, so no PERF_RECORD_LOST events are generated, but don't forget those events. The patch that moved this out of perf top was made so that this routine could be used by 'perf probe' in the uprobes patchset, so perhaps there they need to check for LOST events and warn the user, as will be done in the following patches that will switch 'perf top' to non overwrite mode (mmap with PROT_READ|PROT_WRITE). Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Srikar Dronamraju <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-29perf record: No need to check for overwritesArnaldo Carvalho de Melo1-19/+3
As we open the mmap with (PROT_READ | PROT_WRITE), signalling the kernel with perf_mmap__write_tail() when consuming data, so the kernel will not overwrite. Suggested-by: Peter Zijlstra <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Zanussi <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2011-01-28perf test: Fix return values checkingHan Pingtian1-3/+3
Fixing some cut'n'paste mistakes. LKML-Reference: <[email protected]> Signed-off-by: Han Pingtian <[email protected]> [ committer note: I had already removed the CPU_ALLOC calls ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>