aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-04-26selftests/bpf: Add remaining ASSERT_xxx() variantsAndrii Nakryiko7-15/+56
Add ASSERT_TRUE/ASSERT_FALSE for conditions calculated with custom logic to true/false. Also add remaining arithmetical assertions: - ASSERT_LE -- less than or equal; - ASSERT_GT -- greater than; - ASSERT_GE -- greater than or equal. This should cover most scenarios where people fall back to error-prone CHECK()s. Also extend ASSERT_ERR() to print out errno, in addition to direct error. Also convert few CHECK() instances to ensure new ASSERT_xxx() variants work as expected. Subsequent patch will also use ASSERT_TRUE/ASSERT_FALSE more extensively. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Lorenz Bauer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-26Merge tag 'spi-v5.13' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The only core work for SPI this time around is the completion of the conversion to the new style method for specifying transfer delays, meaning we can cope with what most controllers support more directly using conversions in the core rather than open coding in drivers. Otherwise it's a good stack of cleanups and fixes plus a few new drivers. Summary: - Completion of the conversion to new style transfer delay configuration - Introduction and use of module_parport_driver() helper, merged here as there's no parport tree - Support for Altera SoCs on DFL buses, NXP i.MX8DL, HiSilicon Kunpeng, MediaTek MT8195" * tag 'spi-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (113 commits) spi: Rename enable1 to activate in spi_set_cs() spi: Convert Freescale QSPI binding to json schema spi: stm32-qspi: fix debug format string spi: tools: make a symbolic link to the header file spi.h spi: fsi: add a missing of_node_put spi: Make error handling of gpiod_count() call cleaner spidev: Add Micron SPI NOR Authenta device compatible spi: brcm,spi-bcm-qspi: convert to the json-schema spi: altera: Add DFL bus driver for Altera API Controller spi: altera: separate core code from platform code spi: stm32-qspi: Fix compilation warning in ARM64 spi: Handle SPI device setup callback failure. spi: sync up initial chipselect state spi: stm32-qspi: Add dirmap support spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transfer spi: stm32-qspi: fix pm_runtime usage_count counter spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume ...
2021-04-26Merge tag 'pm-5.13-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add some new hardware support (for example, IceLake-D idle states in intel_idle), fix some issues (for example, the handling of negative "sleep length" values in cpuidle governors), add new functionality to the existing drivers (for example, scale-invariance support in the ACPI CPPC cpufreq driver) and clean up code all over. Specifics: - Add idle states table for IceLake-D to the intel_idle driver and update IceLake-X C6 data in it (Artem Bityutskiy). - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and drop the unused do_idle() firmware call from it (Dmitry Osipenko). - Fix cpuidle-qcom-spm Kconfig entry (He Ying). - Fix handling of possible negative tick_nohz_get_next_hrtimer() return values of in cpuidle governors (Rafael Wysocki). - Add support for frequency-invariance to the ACPI CPPC cpufreq driver and update the frequency-invariance engine (FIE) to use it as needed (Viresh Kumar). - Simplify the default delay_us setting in the ACPI CPPC cpufreq driver (Tom Saeger). - Clean up frequency-related computations in the intel_pstate cpufreq driver (Rafael Wysocki). - Fix TBG parent setting for load levels in the armada-37xx cpufreq driver and drop the CPU PM clock .set_parent method for armada-37xx (Marek Behún). - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár). - Fix handling of dev_pm_opp_of_cpumask_add_table() return values in cpufreq-dt to take the -EPROBE_DEFER one into acconut as appropriate (Quanyang Wang). - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich). - Drop the unused for_each_policy() macro from cpufreq (Shaokun Zhang). - Simplify computations in the schedutil cpufreq governor to avoid unnecessary overhead (Yue Hu). - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury). - Fix cpufreq documentation links in Kconfig (Alexander Monakov). - Fix PCI device power state handling in pci_enable_device_flags() to avoid issuse in some cases when the device depends on an ACPI power resource (Rafael Wysocki). - Add missing documentation of pm_runtime_resume_and_get() (Alan Stern). - Add missing static inline stub for pm_runtime_has_no_callbacks() to pm_runtime.h and drop the unused try_to_freeze_nowarn() definition (YueHaibing). - Drop duplicate struct device declaration from pm.h and fix a structure type declaration in intel_rapl.h (Wan Jiabing). - Use dev_set_name() instead of an open-coded equivalent of it in the wakeup sources code and drop a redundant local variable initialization from it (Andy Shevchenko, Colin Ian King). - Use crc32 instead of md5 for e820 memory map integrity check during resume from hibernation on x86 (Chris von Recklinghausen). - Fix typos in comments in the system-wide and hibernation support code (Lu Jialin). - Modify the generic power domains (genpd) code to avoid resuming devices in the "prepare" phase of system-wide suspend and hibernation (Ulf Hansson). - Add Hygon Fam18h RAPL support to the intel_rapl power capping driver (Pu Wen). - Add MAINTAINERS entry for the dynamic thermal power management (DTPM) code (Daniel Lezcano). - Add devm variants of operating performance points (OPP) API functions and switch over some users of the OPP framework to the new resource-managed API (Yangtao Li and Dmitry Osipenko). - Update devfreq core: * Register devfreq devices as cooling devices on demand (Daniel Lezcano). * Add missing unlock opeation in devfreq_add_device() (Lukasz Luba). * Use the next frequency as resume_freq instead of the previous frequency when using the opp-suspend property (Dong Aisheng). * Check get_dev_status in devfreq_update_stats() (Dong Aisheng). * Fix set_freq path for the userspace governor in Kconfig (Dong Aisheng). * Remove invalid description of get_target_freq() (Dong Aisheng). - Update devfreq drivers: * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded of_match_ptr() (Dong Aisheng, Fabio Estevam). * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop references to undefined symbols (Enric Balletbo i Serra, Gaël PORTAY). * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof Kozlowski). * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam). - Fix kernel-doc warnings in three places (Pierre-Louis Bossart). - Fix typo in the pm-graph utility code (Ricardo Ribalda)" * tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) PM: wakeup: remove redundant assignment to variable retval PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check cpufreq: Kconfig: fix documentation links PM: wakeup: use dev_set_name() directly PM: runtime: Add documentation for pm_runtime_resume_and_get() cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits() cpufreq: armada-37xx: Fix module unloading cpufreq: armada-37xx: Remove cur_frequency variable cpufreq: armada-37xx: Fix determining base CPU frequency cpufreq: armada-37xx: Fix driver cleanup when registration failed clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0 clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz cpufreq: armada-37xx: Fix the AVS value for load L1 clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock cpufreq: armada-37xx: Fix setting TBG parent for load levels cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration cpuidle: tegra: Remove do_idle firmware call cpuidle: tegra: Fix C7 idling state on Tegra114 PM: sleep: fix typos in comments cpufreq: Remove unused for_each_policy macro ...
2021-04-26Merge tag 'acpi-5.13-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to the most recent upstream revision including (but not limited to) new material introduced in the 6.4 version of the spec, update message printing in the ACPI-related code, address a few issues and clean up code in a number of places. Specifics: - Update ACPICA code in the kernel to upstream revision 20210331 including the following changes: * Add parsing for IVRS IVHD 40h and device entry F0h (Alexander Monakov). * Add new CEDT table for CXL 2.0 and iASL support for it (Ben Widawsky, Bob Moore). * NFIT: add Location Cookie field (Bob Moore). * HMAT: add new fields/flags (Bob Moore). * Add new flags in SRAT (Bob Moore). * PMTT: add new fields/structures (Bob Moore). * Add CSI2Bus resource template (Bob Moore). * iASL: Decode subtable type field for VIOT (Bob Moore). * Fix various typos and spelling mistakes (Colin Ian King). * Add new predefined objects _BPC, _BPS, and _BPT (Erik Kaneda). * Add USB4 capabilities UUID (Erik Kaneda). * Add CXL ACPI device ID and _CBR object (Erik Kaneda). * MADT: add Multiprocessor Wakeup Structure (Erik Kaneda). * PCCT: add support for subtable type 5 (Erik Kaneda). * PPTT: add new version of subtable type 1 (Erik Kaneda). * Add SDEV secure access components (Erik Kaneda). * Add support for PHAT table (Erik Kaneda). * iASL: Add definitions for the VIOT table (Jean-Philippe Brucker). * acpisrc: Add missing conversion for VIOT support (Jean-Philippe Brucker). * IORT: Updates for revision E.b (Shameer Kolothum). - Rearrange message printing in ACPI-related code to avoid using the ACPICA's internal message printing macros outside ACPICA and do some related code cleanups (Rafael Wysocki). - Modify the device enumeration code to turn off all of the unused ACPI power resources at the end (Rafael Wysocki). - Change the ACPI power resources handling code to turn off unused ACPI power resources without checking their status which should not be necessary by the spec (Rafael Wysocki). - Add empty stubs for CPPC-related functions to be used when CONFIG_ACPI_CPPC_LIB is not set (Rafael Wysocki). - Simplify device enumeration code (Rafael Wysocki). - Change device enumeration code to use match_string() for string matching (Andy Shevchenko). - Modify irqresource_disabled() to retain the resouce flags that have been set already (Angela Czubak). - Add native backlight whitelist entry for GA401/GA502/GA503 (Luke Jones). - Modify the ACPI backlight driver to let the native backlight handling take over on hardware-reduced systems (Hans de Goede). - Introduce acpi_dev_get() and switch over the ACPI core code to using it (Andy Shevchenko). - Use kobj_attribute as callback argument instead of a local struct type in the CPPC linrary code (Nathan Chancellor). - Drop unneeded initializatio of a static variable from the ACPI processor driver (Tian Tao). - Drop unnecessary local variable assignment from the ACPI APEI code (Colin Ian King). - Document for_each_acpi_dev_match() macro (Andy Shevchenko). - Address assorted coding style issues in multiple places (Xiaofei Tan). - Capitalize TLAs in a few comments (Andy Shevchenko). - Correct assorted typos in comments (Tom Saeger)" * tag 'acpi-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits) ACPI: video: use native backlight for GA401/GA502/GA503 ACPI: APEI: remove redundant assignment to variable rc ACPI: utils: Capitalize abbreviations in the comments ACPI: utils: Document for_each_acpi_dev_match() macro ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI code ACPI: scan: Utilize match_string() API resource: Prevent irqresource_disabled() from erasing flags ACPI: CPPC: Replace cppc_attr with kobj_attribute ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids() ACPI: scan: Drop sta argument from acpi_init_device_object() ACPI: scan: Drop sta argument from acpi_add_single_object() ACPI: scan: Rearrange checks in acpi_bus_check_add() ACPI: scan: Fold acpi_bus_type_and_status() into its caller ACPI: video: Check LCD flag on ACPI-reduced-hardware devices ACPI: utils: Add acpi_reduced_hardware() helper ACPI: dock: fix some coding style issues ACPI: sysfs: fix some coding style issues ACPI: PM: add a missed blank line after declarations ACPI: custom_method: fix a coding style issue ACPI: CPPC: fix some coding style issues ...
2021-04-26Merge tag 'docs-5.13' of git://git.lwn.net/linuxLinus Torvalds2-2/+3
Pull documentation updates from Jonathan Corbet: "It's been a relatively busy cycle in docsland, though more than usually well contained to Documentation/ itself. Highlights include: - The Chinese translators have been busy and show no signs of stopping anytime soon. Italian has also caught up. - Aditya Srivastava has been working on improvements to the kernel-doc script. - Thorsten continues his work on reporting-issues.rst and related documentation around regression reporting. - Lots of documentation updates, typo fixes, etc. as usual" * tag 'docs-5.13' of git://git.lwn.net/linux: (139 commits) docs/zh_CN: add openrisc translation to zh_CN index docs/zh_CN: add openrisc index.rst translation docs/zh_CN: add openrisc todo.rst translation docs/zh_CN: add openrisc openrisc_port.rst translation docs/zh_CN: add core api translation to zh_CN index docs/zh_CN: add core-api index.rst translation docs/zh_CN: add core-api irq index.rst translation docs/zh_CN: add core-api irq irqflags-tracing.rst translation docs/zh_CN: add core-api irq irq-domain.rst translation docs/zh_CN: add core-api irq irq-affinity.rst translation docs/zh_CN: add core-api irq concepts.rst translation docs: sphinx-pre-install: don't barf on beta Sphinx releases scripts: kernel-doc: improve parsing for kernel-doc comments syntax docs/zh_CN: two minor fixes in zh_CN/doc-guide/ Documentation: dev-tools: Add Testing Overview docs/zh_CN: add translations in zh_CN/dev-tools/gcov docs: reporting-issues: make people CC the regressions list MAINTAINERS: add regressions mailing list doc:it_IT: align Italian documentation docs/zh_CN: sync reporting-issues.rst ...
2021-04-26Merge tag 'usb-5.13-rc1' of ↵Linus Torvalds4-7/+74
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 5.13-rc1. Lots of little things in here, with loads of tiny fixes and cleanups over these drivers, as well as these "larger" changes: - thunderbolt updates and new features added - xhci driver updates and split out of a mediatek-specific xhci driver from the main xhci module to make it easier to work with (something that I have been wanting for a while). - loads of typec feature additions and updates - dwc2 driver updates - dwc3 driver updates - gadget driver fixes and minor updates - loads of usb-serial cleanups and fixes and updates - usbip documentation updates and fixes - lots of other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (371 commits) usb: Fix up movement of USB core kerneldoc location usb: dwc3: gadget: Handle DEV_TXF_FLUSH_BYPASS capability usb: dwc3: Capture new capability register GHWPARAMS9 usb: gadget: prevent a ternary sign expansion bug usb: dwc3: core: Do core softreset when switch mode usb: dwc2: Get rid of useless error checks in suspend interrupt usb: dwc2: Update dwc2_handle_usb_suspend_intr function. usb: dwc2: Add exit hibernation mode before removing drive usb: dwc2: Add hibernation exiting flow by system resume usb: dwc2: Add hibernation entering flow by system suspend usb: dwc2: Allow exit hibernation in urb enqueue usb: dwc2: Move exit hibernation to dwc2_port_resume() function usb: dwc2: Move enter hibernation to dwc2_port_suspend() function usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated. usb: dwc2: Clear fifo_map when resetting core. usb: dwc2: Allow exiting hibernation from gpwrdn rst detect usb: dwc2: Fix hibernation between host and device modes. usb: dwc2: Fix host mode hibernation exit with remote wakeup flow. usb: dwc2: Reset DEVADDR after exiting gadget hibernation. usb: dwc2: Update exit hibernation when port reset is asserted ...
2021-04-26Merge tag 'staging-5.13-rc1' of ↵Linus Torvalds5-60/+190
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver updates from Greg KH: "Here is the big set of staging and IIO driver updates for 5.13-rc1. Lots of little churn in here, and some larger churn as well. Major things are: - removal of wimax drivers, no one has this hardware anymore for this failed "experiment". - removal of the Google gasket driver, turns out no one wanted to maintain it or cares about it anymore, so they asked for it to be removed. - comedi finally moves out of the staging directory into drivers/comedi This is one of the oldest kernel subsystems around, being created in the 2.0 kernel days, and was one of the first things added to drivers/staging/ when that was created over 15 years ago. It should have been moved out of staging a long time ago, it's well maintained and used by loads of different devices in the real world every day. Nice to see this finally happen. - so many tiny coding style cleanups it's not funny. Perfect storm of at least 2 different intern project application deadlines combined to provide a huge number of new contributions in this area from people learning how to do kernel development. Great job to everyone involved here. There's also the normal updates for IIO drivers with new IIO drivers and updates all over that subsystem. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (907 commits) staging: octeon: Use 'for_each_child_of_node' Staging: rtl8723bs: rtw_xmit: fixed tabbing issue staging: rtl8188eu: remove unused function parameters staging: rtl8188eu: cmdThread is a task_struct staging: rtl8188eu: remove constant variable and dead code staging: rtl8188eu: change bLeisurePs' type to bool staging: rtl8723bs: remove empty #ifdef block staging: rtl8723bs: remove unused DBG_871X_LEVEL macro declarations staging: rtl8723bs: split too long line staging: rtl8723bs: fix indentation in if block staging: rtl8723bs: fix code indent issue staging: rtl8723bs: replace DBG_871X_LEVEL logs with netdev_*() staging: rtl8192e: indent statement properly staging: rtl8723bs: Remove led_blink_hdl() and everything related staging: comedi: move out of staging directory staging: rtl8723bs: remove sdio_drv_priv structure staging: rtl8723bs: remove unused argument in function staging: rtl8723bs: remove DBG_871X_SEL_NL macro declaration staging: rtl8723bs: replace DBG_871X_SEL_NL with netdev_dbg() staging: rtl8723bs: fix indentation issue introduced by long line split ...
2021-04-26Merge tag 'driver-core-5.13-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core changes for 5.13-rc1. Nothing major, just lots of little core changes and cleanups, notable things are: - finally set 'fw_devlink=on' by default. All reported issues with this have been shaken out over the past 9 months or so, but we will be paying attention to any fallout here in case we need to revert this as the default boot value (symptoms of problems are a simple lack of booting) - fixes found to be needed by fw_devlink=on value in some subsystems (like clock). - delayed work initialization cleanup - driver core cleanups and minor updates - software node cleanups and tweaks - devtmpfs cleanups - minor debugfs cleanups All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (53 commits) devm-helpers: Fix devm_delayed_work_autocancel() kerneldoc PM / wakeup: use dev_set_name() directly software node: Allow node addition to already existing device kunit: software node: adhear to KUNIT formatting standard node: fix device cleanups in error handling code kobject_uevent: remove warning in init_uevent_argv() debugfs: Make debugfs_allow RO after init Revert "driver core: platform: Make platform_get_irq_optional() optional" media: ipu3-cio2: Switch to use SOFTWARE_NODE_REFERENCE() software node: Introduce SOFTWARE_NODE_REFERENCE() helper macro software node: Imply kobj_to_swnode() to be no-op software node: Deduplicate code in fwnode_create_software_node() software node: Introduce software_node_alloc()/software_node_free() software node: Free resources explicitly when swnode_register() fails debugfs: drop pointless nul-termination in debugfs_read_file_bool() driver core: add helper for deferred probe reason setting driver core: Improve fw_devlink & deferred_probe_timeout interaction of: property: fw_devlink: Add support for remote-endpoint driver core: platform: Make platform_get_irq_optional() optional driver core: Replace printf() specifier and drop unneeded casting ...
2021-04-26Merge tag 'platform-drivers-x86-v5.13-1' of ↵Linus Torvalds2-6/+36
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates freom Hans de Goede: - lots of Microsoft Surface work - platform-profile support for HP and Microsoft Surface devices - new WMI Gigabyte motherboard temperature monitoring driver - Intel PMC improvements for Tiger Lake and Alder Lake - misc bugfixes, improvements and quirk additions all over * tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits) platform/x86: gigabyte-wmi: add support for B550M AORUS PRO-P platform/x86: intel_pmc_core: Uninitialized data in pmc_core_lpm_latch_mode_write() platform/x86: intel_pmc_core: add ACPI dependency platform/surface: aggregator: fix a bit test platform/x86: intel_pmc_core: Fix "unsigned 'ret' is never less than zero" smatch warning platform/x86: touchscreen_dmi: Add info for the Teclast Tbook 11 tablet platform/x86: intel_pmc_core: Add support for Alder Lake PCH-P platform/x86: intel_pmc_core: Add LTR registers for Tiger Lake platform/x86: intel_pmc_core: Add option to set/clear LPM mode platform/x86: intel_pmc_core: Add requirements file to debugfs platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake platform/x86: intel_pmc_core: Show LPM residency in microseconds platform/x86: intel_pmc_core: Handle sub-states generically platform/x86: intel_pmc_core: Remove global struct pmc_dev platform/x86: intel_pmc_core: Don't use global pmcdev in quirks platform/x86: intel_chtdc_ti_pwrbtn: Fix missing IRQF_ONESHOT as only threaded handler platform/x86: gigabyte-wmi: add X570 AORUS ELITE platform/x86: thinkpad_acpi: Add labels to the first 2 temperature sensors platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table platform/x86: add Gigabyte WMI temperature driver ...
2021-04-26Merge tag 'arm64-upstream' of ↵Linus Torvalds20-24/+676
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - MTE asynchronous support for KASan. Previously only synchronous (slower) mode was supported. Asynchronous is faster but does not allow precise identification of the illegal access. - Run kernel mode SIMD with softirqs disabled. This allows using NEON in softirq context for crypto performance improvements. The conditional yield support is modified to take softirqs into account and reduce the latency. - Preparatory patches for Apple M1: handle CPUs that only have the VHE mode available (host kernel running at EL2), add FIQ support. - arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers, new functions for the HiSilicon HHA and L3C PMU, cleanups. - Re-introduce support for execute-only user permissions but only when the EPAN (Enhanced Privileged Access Never) architecture feature is available. - Disable fine-grained traps at boot and improve the documented boot requirements. - Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC). - Add hierarchical eXecute Never permissions for all page tables. - Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs to control which PAC keys are enabled in a particular task. - arm64 kselftests for BTI and some improvements to the MTE tests. - Minor improvements to the compat vdso and sigpage. - Miscellaneous cleanups. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (86 commits) arm64/sve: Add compile time checks for SVE hooks in generic functions arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG. arm64: pac: Optimize kernel entry/exit key installation code paths arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere arm64/sve: Remove redundant system_supports_sve() tests arm64: fpsimd: run kernel mode NEON with softirqs disabled arm64: assembler: introduce wxN aliases for wN registers arm64: assembler: remove conditional NEON yield macros kasan, arm64: tests supports for HW_TAGS async mode arm64: mte: Report async tag faults before suspend arm64: mte: Enable async tag check fault arm64: mte: Conditionally compile mte_enable_kernel_*() arm64: mte: Enable TCO in functions that can read beyond buffer limits kasan: Add report for async mode arm64: mte: Drop arch_enable_tagging() kasan: Add KASAN mode kernel parameter arm64: mte: Add asynchronous mode support arm64: Get rid of CONFIG_ARM64_VHE arm64: Cope with CPUs stuck in VHE mode ...
2021-04-26Merge tag 'x86-entry-2021-04-26' of ↵Linus Torvalds3-0/+38
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull entry code update from Thomas Gleixner: "Provide support for randomized stack offsets per syscall to make stack-based attacks harder which rely on the deterministic stack layout. The feature is based on the original idea of PaX's RANDSTACK feature, but uses a significantly different implementation. The offset does not affect the pt_regs location on the task stack as this was agreed on to be of dubious value. The offset is applied before the actual syscall is invoked. The offset is stored per cpu and the randomization happens at the end of the syscall which is less predictable than on syscall entry. The mechanism to apply the offset is via alloca(), i.e. abusing the dispised VLAs. This comes with the drawback that stack-clash-protection has to be disabled for the affected compilation units and there is also a negative interaction with stack-protector. Those downsides are traded with the advantage that this approach does not require any intrusive changes to the low level assembly entry code, does not affect the unwinder and the correct stack alignment is handled automatically by the compiler. The feature is guarded with a static branch which avoids the overhead when disabled. Currently this is supported for X86 and ARM64" * tag 'x86-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64: entry: Enable random_kstack_offset support lkdtm: Add REPORT_STACK for checking stack offsets x86/entry: Enable random_kstack_offset support stack: Optionally randomize kernel stack offset each syscall init_on_alloc: Optimize static branches jump_label: Provide CONFIG-driven build state defaults
2021-04-26Merge tag 'timers-core-2021-04-26' of ↵Linus Torvalds4-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The time and timers updates contain: Core changes: - Allow runtime power management when the clocksource is changed. - A correctness fix for clock_adjtime32() so that the return value on success is not overwritten by the result of the copy to user. - Allow late installment of broadcast clockevent devices which was broken because nothing switched them over to oneshot mode. This went unnoticed so far because clockevent devices used to be built in, but now people started to make them modular. - Debugfs related simplifications - Small cleanups and improvements here and there Driver changes: - The usual set of device tree binding updates for a wide range of drivers/devices. - The usual updates and improvements for drivers all over the place but nothing outstanding. - No new clocksource/event drivers. They'll come back next time" * tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) posix-timers: Preserve return value in clock_adjtime32() tick/broadcast: Allow late registered device to enter oneshot mode tick: Use tick_check_replacement() instead of open coding it time/timecounter: Mark 1st argument of timecounter_cyc2time() as const dt-bindings: timer: nuvoton,npcm7xx: Add wpcm450-timer clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940 clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak clocksource/drivers/npcm: Add support for WPCM450 clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3 clocksource/drivers/pistachio: Fix trivial typo clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe() clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped clocksource/drivers/timer-ti-dm: Fix posted mode status check order dt-bindings: timer: renesas,cmt: Document R8A77961 dt-bindings: timer: renesas,cmt: Add r8a779a0 CMT support clocksource/drivers/ingenic-ost: Add support for the JZ4760B clocksource/drivers/ingenic: Add support for the JZ4760 dt-bindings: timer: ingenic: Add compatible strings for JZ4760(B) ...
2021-04-26Merge tag 'x86_cleanups_for_v5.13' of ↵Linus Torvalds3-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 cleanups from Borislav Petkov: "Trivial cleanups and fixes all over the place" * tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Remove me from IDE/ATAPI section x86/pat: Do not compile stubbed functions when X86_PAT is off x86/asm: Ensure asm/proto.h can be included stand-alone x86/platform/intel/quark: Fix incorrect kernel-doc comment syntax in files x86/msr: Make locally used functions static x86/cacheinfo: Remove unneeded dead-store initialization x86/process/64: Move cpu_current_top_of_stack out of TSS tools/turbostat: Unmark non-kernel-doc comment x86/syscalls: Fix -Wmissing-prototypes warnings from COND_SYSCALL() x86/fpu/math-emu: Fix function cast warning x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes x86: Fix various typos in comments, take #2 x86: Remove unusual Unicode characters from comments x86/kaslr: Return boolean values from a function returning bool x86: Fix various typos in comments x86/setup: Remove unused RESERVE_BRK_ARRAY() stacktrace: Move documentation for arch_stack_walk_reliable() to header x86: Remove duplicate TSC DEADLINE MSR definitions
2021-04-26KVM: selftests: Speed up set_memory_region_testVitaly Kuznetsov1-16/+45
After commit 4fc096a99e01 ("KVM: Raise the maximum number of user memslots") set_memory_region_test may take too long, reports are that the default timeout value we have (120s) may not be enough even on a physical host. Speed things up a bit by throwing away vm_userspace_mem_region_add() usage from test_add_max_memory_regions(), we don't really need to do the majority of the stuff it does for the sake of this test. On my AMD EPYC 7401P, # time ./set_memory_region_test pre-patch: Testing KVM_RUN with zero added memory regions Allowed number of memory slots: 32764 Adding slots 0..32763, each memory region with 2048K size Testing MOVE of in-use region, 10 loops Testing DELETE of in-use region, 10 loops real 0m44.917s user 0m7.416s sys 0m34.601s post-patch: Testing KVM_RUN with zero added memory regions Allowed number of memory slots: 32764 Adding slots 0..32763, each memory region with 2048K size Testing MOVE of in-use region, 10 loops Testing DELETE of in-use region, 10 loops real 0m20.714s user 0m0.109s sys 0m18.359s Reported-by: kernel test robot <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-04-26Merge tag 'x86_sgx_for_v5.13' of ↵Linus Torvalds3-36/+61
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SGX updates from Borislav Petkov: "Add the guest side of SGX support in KVM guests. Work by Sean Christopherson, Kai Huang and Jarkko Sakkinen. Along with the usual fixes, cleanups and improvements" * tag 'x86_sgx_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/sgx: Mark sgx_vepc_vm_ops static x86/sgx: Do not update sgx_nr_free_pages in sgx_setup_epc_section() x86/sgx: Move provisioning device creation out of SGX driver x86/sgx: Add helpers to expose ECREATE and EINIT to KVM x86/sgx: Add helper to update SGX_LEPUBKEYHASHn MSRs x86/sgx: Add encls_faulted() helper x86/sgx: Add SGX2 ENCLS leaf definitions (EAUG, EMODPR and EMODT) x86/sgx: Move ENCLS leaf definitions to sgx.h x86/sgx: Expose SGX architectural definitions to the kernel x86/sgx: Initialize virtual EPC driver even when SGX driver is disabled x86/cpu/intel: Allow SGX virtualization without Launch Control support x86/sgx: Introduce virtual EPC for use by KVM guests x86/sgx: Add SGX_CHILD_PRESENT hardware error code x86/sgx: Wipe out EREMOVE from sgx_free_epc_page() x86/cpufeatures: Add SGX1 and SGX2 sub-features x86/cpufeatures: Make SGX_LC feature bit depend on SGX bit x86/sgx: Remove unnecessary kmap() from sgx_ioc_enclave_init() selftests/sgx: Use getauxval() to simplify test code selftests/sgx: Improve error detection and messages x86/sgx: Add a basic NUMA allocation scheme to sgx_alloc_epc_page() ...
2021-04-26Merge tag 'x86_misc_for_v5.13' of ↵Linus Torvalds4-0/+1083
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 tool update from Borislav Petkov: "A new kcpuid tool to dump the raw CPUID leafs of a CPU. It has the CPUID bit definitions in a separate csv file which allows for adding support for new CPUID leafs and bits without having to update the tool. The main use case for the tool is hw enablement on preproduction x86 hardware" * tag 'x86_misc_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/x86/kcpuid: Add AMD leaf 0x8000001E tools/x86/kcpuid: Check last token too selftests/x86: Add a missing .note.GNU-stack section to thunks_32.S tools/x86/kcpuid: Add AMD Secure Encryption leaf tools/x86: Add a kcpuid tool to show raw CPU features
2021-04-26Merge tag 'x86_alternatives_for_v5.13' of ↵Linus Torvalds1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 alternatives/paravirt updates from Borislav Petkov: "First big cleanup to the paravirt infra to use alternatives and thus eliminate custom code patching. For that, the alternatives infrastructure is extended to accomodate paravirt's needs and, as a result, a lot of paravirt patching code goes away, leading to a sizeable cleanup and simplification. Work by Juergen Gross" * tag 'x86_alternatives_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/paravirt: Have only one paravirt patch function x86/paravirt: Switch functions with custom code to ALTERNATIVE x86/paravirt: Add new PVOP_ALT* macros to support pvops in ALTERNATIVEs x86/paravirt: Switch iret pvops to ALTERNATIVE x86/paravirt: Simplify paravirt macros x86/paravirt: Remove no longer needed 32-bit pvops cruft x86/paravirt: Add new features for paravirt patching x86/alternative: Use ALTERNATIVE_TERNARY() in _static_cpu_has() x86/alternative: Support ALTERNATIVE_TERNARY x86/alternative: Support not-feature x86/paravirt: Switch time pvops functions to use static_call() static_call: Add function to query current function static_call: Move struct static_call_key definition to static_call_types.h x86/alternative: Merge include files x86/alternative: Drop unused feature parameter from ALTINSTR_REPLACEMENT()
2021-04-26Merge branch 'acpica'Rafael J. Wysocki1-1/+1
* acpica: (22 commits) ACPICA: Update version to 20210331 ACPICA: IORT: Updates for revision E.b ACPICA: acpisrc: Add missing conversion for VIOT support ACPICA: iASL: Decode subtable type field for VIOT ACPICA: iASL: Add support for CEDT table ACPICA: ACPI 6.4: add support for PHAT table ACPICA: ACPI 6.4: add CSI2Bus resource template ACPICA: ACPI 6.4: PMTT: add new fields/structures ACPICA: CXL 2.0: CEDT: Add new CEDT table ACPICA: iASL: Add definitions for the VIOT table ACPICA: ACPI 6.4: add SDEV secure access components ACPICA: ACPI 6.4: Add new flags in SRAT ACPICA: ACPI 6.4: HMAT: add new fields/flags ACPICA: ACPI 6.4: NFIT: add Location Cookie field ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: ACPI 6.4: PPTT: add new version of subtable type 1 ACPICA: ACPI 6.4: PCCT: add support for subtable type 5 ACPICA: ACPI 6.4: MADT: add Multiprocessor Wakeup Structure ACPICA: ACPI 6.4: add CXL ACPI device ID and _CBR object ACPICA: ACPI 6.4: add USB4 capabilities UUID ...
2021-04-26Merge branches 'pm-docs' and 'pm-tools'Rafael J. Wysocki1-1/+1
* pm-docs: PM: clk: remove kernel-doc warning PM: wakeup: fix kernel-doc warnings and fix typos PM: runtime: remove kernel-doc warnings * pm-tools: pm-graph: Fix typo "accesible"
2021-04-26Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo13-50/+30
To pick up fixes. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-04-26selftests: kvm: Fix the check of return valueZhenzhong Duan1-2/+2
In vm_vcpu_rm() and kvm_vm_release(), a stale return value is checked in TEST_ASSERT macro. Fix it by assigning variable ret with correct return value. Signed-off-by: Zhenzhong Duan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-04-25selftests/bpf: Use ASSERT macros in lsm testJiri Olsa1-17/+10
Replacing CHECK with ASSERT macros. Suggested-by: Andrii Nakryiko <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-25selftests/bpf: Test that module can't be unloaded with attached trampolineJiri Olsa1-0/+23
Adding test to verify that once we attach module's trampoline, the module can't be unloaded. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-25selftests/bpf: Add re-attach test to lsm testJiri Olsa1-10/+38
Adding the test to re-attach (detach/attach again) lsm programs, plus check that already linked program can't be attached again. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-25selftests/bpf: Add re-attach test to fexit_testJiri Olsa1-15/+37
Adding the test to re-attach (detach/attach again) tracing fexit programs, plus check that already linked program can't be attached again. Also switching to ASSERT* macros. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-25selftests/bpf: Add re-attach test to fentry_testJiri Olsa1-15/+37
Adding the test to re-attach (detach/attach again) tracing fentry programs, plus check that already linked program can't be attached again. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller47-497/+2559
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-04-23 The following pull-request contains BPF updates for your *net-next* tree. We've added 69 non-merge commits during the last 22 day(s) which contain a total of 69 files changed, 3141 insertions(+), 866 deletions(-). The main changes are: 1) Add BPF static linker support for extern resolution of global, from Andrii. 2) Refine retval for bpf_get_task_stack helper, from Dave. 3) Add a bpf_snprintf helper, from Florent. 4) A bunch of miscellaneous improvements from many developers. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-04-25Merge tag 'perf-tools-fixes-for-v5.12-2021-04-25' of ↵Linus Torvalds4-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix potential NULL pointer dereference in the auxtrace option parser - Fix access to PID in an array when setting a PID filter in 'perf ftrace' - Fix error return code in the 'perf data' tool and in maps__clone(), found using a static analysis tool from Huawei * tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf map: Fix error return code in maps__clone() perf ftrace: Fix access to pid in array when setting a pid filter perf auxtrace: Fix potential NULL pointer dereference perf data: Fix error return code in perf_data__create_dir()
2021-04-25perf vendor events intel: Add missing skylake & icelake model numbersJin Yao1-0/+3
Kernel has supported COMETLAKE/COMETLAKE_L to use the SKYLAKE events and supported TIGERLAKE_L/TIGERLAKE/ROCKETLAKE to use the ICELAKE events. But pmu-events mapfile.csv is missing these model numbers. Now add the missing model numbers to mapfile.csv. Signed-off-by: Jin Yao <[email protected]> Reviewed-by: Andi Kleen <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-04-25tools: do not include scripts/Kbuild.includeMasahiro Yamada5-4/+28
Since commit 57fd251c7896 ("kbuild: split cc-option and friends to scripts/Makefile.compiler"), some kselftests fail to build. The tools/ directory opted out Kbuild, and went in a different direction. People copied scripts and Makefiles to the tools/ directory to create their own build system. tools/build/Build.include mimics scripts/Kbuild.include, but some tool Makefiles include the Kbuild one to import a feature that is missing in tools/build/Build.include: - Commit ec04aa3ae87b ("tools/thermal: tmon: use "-fstack-protector" only if supported") included scripts/Kbuild.include from tools/thermal/tmon/Makefile to import the cc-option macro. - Commit c2390f16fc5b ("selftests: kvm: fix for compilers that do not support -no-pie") included scripts/Kbuild.include from tools/testing/selftests/kvm/Makefile to import the try-run macro. - Commit 9cae4ace80ef ("selftests/bpf: do not ignore clang failures") included scripts/Kbuild.include from tools/testing/selftests/bpf/Makefile to import the .DELETE_ON_ERROR target. - Commit 0695f8bca93e ("selftests/powerpc: Handle Makefile for unrecognized option") included scripts/Kbuild.include from tools/testing/selftests/powerpc/pmu/ebb/Makefile to import the try-run macro. Copy what they need into tools/build/Build.include, and make them include it instead of scripts/Kbuild.include. Link: https://lore.kernel.org/lkml/[email protected]/ Fixes: 57fd251c7896 ("kbuild: split cc-option and friends to scripts/Makefile.compiler") Reported-by: Janosch Frank <[email protected]> Reported-by: Christian Borntraeger <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Tested-by: Christian Borntraeger <[email protected]> Acked-by: Yonghong Song <[email protected]>
2021-04-23tools/cgroup/slabinfo.py: updated to work on current kernelVasily Averin1-4/+4
slabinfo.py script does not work with actual kernel version. First, it was unable to recognise SLUB susbsytem, and when I specified it manually it failed again with AttributeError: 'struct page' has no member 'obj_cgroups' .. and then again with File "tools/cgroup/memcg_slabinfo.py", line 221, in main memcg.kmem_caches.address_of_(), AttributeError: 'struct mem_cgroup' has no member 'kmem_caches' Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Vasily Averin <[email protected]> Tested-by: Roman Gushchin <[email protected]> Acked-by: Roman Gushchin <[email protected]> Cc: Michal Hocko <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-04-23selftests/net: bump timeout to 5 minutesPo-Hsu Lin2-0/+3
We found that with the latest mainline kernel (5.12.0-051200rc8) on some KVM instances / bare-metal systems, the following tests will take longer than the kselftest framework default timeout (45 seconds) to run and thus got terminated with TIMEOUT error: * xfrm_policy.sh - took about 2m20s * pmtu.sh - took about 3m5s * udpgso_bench.sh - took about 60s Bump the timeout setting to 5 minutes to allow them have a chance to finish. https://bugs.launchpad.net/bugs/1856010 Signed-off-by: Po-Hsu Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-04-23selftests: mptcp: add a test case for MSG_PEEKYonglong Li2-8/+69
Extend mptcp_connect tool with MSG_PEEK support and add a test case in mptcp_connect.sh that checks the data received from/after recv() with MSG_PEEK. Acked-by: Paolo Abeni <[email protected]> Co-developed-by: Matthieu Baerts <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Yonglong Li <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-04-23selftests/bpf: Document latest Clang fix expectations for linking testsAndrii Nakryiko1-0/+9
Document which fixes are required to generate correct static linking selftests. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23selftests/bpf: Add map linking selftestAndrii Nakryiko4-1/+191
Add selftest validating various aspects of statically linking BTF-defined map definitions. Legacy map definitions do not support extern resolution between object files. Some of the aspects validated: - correct resolution of extern maps against concrete map definitions; - extern maps can currently only specify map type and key/value size and/or type information; - weak concrete map definitions are resolved properly. Static map definitions are not yet supported by libbpf, so they are not explicitly tested, though manual testing showes that BPF linker handles them properly. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23selftests/bpf: Add global variables linking selftestAndrii Nakryiko4-1/+154
Add selftest validating various aspects of statically linking global variables: - correct resolution of extern variables across .bss, .data, and .rodata sections; - correct handling of weak definitions; - correct de-duplication of repeating special externs (.kconfig, .ksyms). Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23selftests/bpf: Add function linking selftestAndrii Nakryiko4-1/+190
Add selftest validating various aspects of statically linking functions: - no conflicts and correct resolution for name-conflicting static funcs; - correct resolution of extern functions; - correct handling of weak functions, both resolution itself and libbpf's handling of unused weak function that "lost" (it leaves gaps in code with no ELF symbols); - correct handling of hidden visibility to turn global function into "static" for the purpose of BPF verification. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23selftests/bpf: Omit skeleton generation for multi-linked BPF object filesAndrii Nakryiko1-1/+3
Skip generating individual BPF skeletons for files that are supposed to be linked together to form the final BPF object file. Very often such files are "incomplete" BPF object files, which will fail libbpf bpf_object__open() step, if used individually, thus failing BPF skeleton generation. This is by design, so skip individual BPF skeletons and only validate them as part of their linked final BPF object file and skeleton. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23selftests/bpf: Use -O0 instead of -Og in selftests buildsAndrii Nakryiko1-4/+4
While -Og is designed to work well with debugger, it's still inferior to -O0 in terms of debuggability experience. It will cause some variables to still be inlined, it will also prevent single-stepping some statements and otherwise interfere with debugging experience. So switch to -O0 which turns off any optimization and provides the best debugging experience. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23libbpf: Support extern resolution for BTF-defined maps in .maps sectionAndrii Nakryiko1-0/+132
Add extra logic to handle map externs (only BTF-defined maps are supported for linking). Re-use the map parsing logic used during bpf_object__open(). Map externs are currently restricted to always match complete map definition. So all the specified attributes will be compared (down to pining, map_flags, numa_node, etc). In the future this restriction might be relaxed with no backwards compatibility issues. If any attribute is mismatched between extern and actual map definition, linker will report an error, pointing out which one mismatches. The original intent was to allow for extern to specify attributes that matters (to user) to enforce. E.g., if you specify just key information and omit value, then any value fits. Similarly, it should have been possible to enforce map_flags, pinning, and any other possible map attribute. Unfortunately, that means that multiple externs can be only partially overlapping with each other, which means linker would need to combine their type definitions to end up with the most restrictive and fullest map definition. This requires an extra amount of BTF manipulation which at this time was deemed unnecessary and would require further extending generic BTF writer APIs. So that is left for future follow ups, if there will be demand for that. But the idea seems intresting and useful, so I want to document it here. Weak definitions are also supported, but are pretty strict as well, just like externs: all weak map definitions have to match exactly. In the follow up patches this most probably will be relaxed, with __weak map definitions being able to differ between each other (with non-weak definition always winning, of course). Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23libbpf: Add linker extern resolution support for functions and global variablesAndrii Nakryiko1-59/+790
Add BPF static linker logic to resolve extern variables and functions across multiple linked together BPF object files. For that, linker maintains a separate list of struct glob_sym structures, which keeps track of few pieces of metadata (is it extern or resolved global, is it a weak symbol, which ELF section it belongs to, etc) and ties together BTF type info and ELF symbol information and keeps them in sync. With adding support for extern variables/funcs, it's now possible for some sections to contain both extern and non-extern definitions. This means that some sections may start out as ephemeral (if only externs are present and thus there is not corresponding ELF section), but will be "upgraded" to actual ELF section as symbols are resolved or new non-extern definitions are appended. Additional care is taken to not duplicate extern entries in sections like .kconfig and .ksyms. Given libbpf requires BTF type to always be present for .kconfig/.ksym externs, linker extends this requirement to all the externs, even those that are supposed to be resolved during static linking and which won't be visible to libbpf. With BTF information always present, static linker will check not just ELF symbol matches, but entire BTF type signature match as well. That logic is stricter that BPF CO-RE checks. It probably should be re-used by .ksym resolution logic in libbpf as well, but that's left for follow up patches. To make it unnecessary to rewrite ELF symbols and minimize BTF type rewriting/removal, ELF symbols that correspond to externs initially will be updated in place once they are resolved. Similarly for BTF type info, VAR/FUNC and var_secinfo's (sec_vars in struct bpf_linker) are staying stable, but types they point to might get replaced when extern is resolved. This might leave some left-over types (even though we try to minimize this for common cases of having extern funcs with not argument names vs concrete function with names properly specified). That can be addresses later with a generic BTF garbage collection. That's left for a follow up as well. Given BTF type appending phase is separate from ELF symbol appending/resolution, special struct glob_sym->underlying_btf_id variable is used to communicate resolution and rewrite decisions. 0 means underlying_btf_id needs to be appended (it's not yet in final linker->btf), <0 values are used for temporary storage of source BTF type ID (not yet rewritten), so -glob_sym->underlying_btf_id is BTF type id in obj-btf. But by the end of linker_append_btf() phase, that underlying_btf_id will be remapped and will always be > 0. This is the uglies part of the whole process, but keeps the other parts much simpler due to stability of sec_var and VAR/FUNC types, as well as ELF symbol, so please keep that in mind while reviewing. BTF-defined maps require some extra custom logic and is addressed separate in the next patch, so that to keep this one smaller and easier to review. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23libbpf: Tighten BTF type ID rewriting with error checkingAndrii Nakryiko1-0/+7
It should never fail, but if it does, it's better to know about this rather than end up with nonsensical type IDs. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23libbpf: Extend sanity checking ELF symbols with externs validationAndrii Nakryiko1-9/+40
Add logic to validate extern symbols, plus some other minor extra checks, like ELF symbol #0 validation, general symbol visibility and binding validations. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23libbpf: Make few internal helpers available outside of libbpf.cAndrii Nakryiko3-18/+16
Make skip_mods_and_typedefs(), btf_kind_str(), and btf_func_linkage() helpers available outside of libbpf.c, to be used by static linker code. Also do few cleanups (error code fixes, comment clean up, etc) that don't deserve their own commit. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23libbpf: Factor out symtab and relos sanity checksAndrii Nakryiko1-106/+127
Factor out logic for sanity checking SHT_SYMTAB and SHT_REL sections into separate sections. They are already quite extensive and are suffering from too deep indentation. Subsequent changes will extend SYMTAB sanity checking further, so it's better to factor each into a separate function. No functional changes are intended. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23libbpf: Refactor BTF map definition parsingAndrii Nakryiko2-111/+178
Refactor BTF-defined maps parsing logic to allow it to be nicely reused by BPF static linker. Further, at least for BPF static linker, it's important to know which attributes of a BPF map were defined explicitly, so provide a bit set for each known portion of BTF map definition. This allows BPF static linker to do a simple check when dealing with extern map declarations. The same capabilities allow to distinguish attributes explicitly set to zero (e.g., __uint(max_entries, 0)) vs the case of not specifying it at all (no max_entries attribute at all). Libbpf is currently not utilizing that, but it could be useful for backwards compatibility reasons later. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23libbpf: Allow gaps in BPF program sections to support overriden weak functionsAndrii Nakryiko1-36/+22
Currently libbpf is very strict about parsing BPF program instruction sections. No gaps are allowed between sequential BPF programs within a given ELF section. Libbpf enforced that by keeping track of the next section offset that should start a new BPF (sub)program and cross-checks that by searching for a corresponding STT_FUNC ELF symbol. But this is too restrictive once we allow to have weak BPF programs and link together two or more BPF object files. In such case, some weak BPF programs might be "overridden" by either non-weak BPF program with the same name and signature, or even by another weak BPF program that just happened to be linked first. That, in turn, leaves BPF instructions of the "lost" BPF (sub)program intact, but there is no corresponding ELF symbol, because no one is going to be referencing it. Libbpf already correctly handles such cases in the sense that it won't append such dead code to actual BPF programs loaded into kernel. So the only change that needs to be done is to relax the logic of parsing BPF instruction sections. Instead of assuming next BPF (sub)program section offset, iterate available STT_FUNC ELF symbols to discover all available BPF subprograms and programs. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23libbpf: Mark BPF subprogs with hidden visibility as static for BPF verifierAndrii Nakryiko4-6/+58
Define __hidden helper macro in bpf_helpers.h, which is a short-hand for __attribute__((visibility("hidden"))). Add libbpf support to mark BPF subprograms marked with __hidden as static in BTF information to enforce BPF verifier's static function validation algorithm, which takes more information (caller's context) into account during a subprogram validation. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23libbpf: Suppress compiler warning when using SEC() macro with externsAndrii Nakryiko1-2/+9
When used on externs SEC() macro will trigger compilation warning about inapplicable `__attribute__((used))`. That's expected for extern declarations, so suppress it with the corresponding _Pragma. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-04-23bpftool: Dump more info about DATASEC membersAndrii Nakryiko1-8/+18
Dump succinct information for each member of DATASEC: its kinds and name. This is extremely helpful to see at a quick glance what is inside each DATASEC of a given BTF. Without this, one has to jump around BTF data to just find out the name of a VAR or FUNC. DATASEC's var_secinfo member is special in that regard because it doesn't itself contain the name of the member, delegating that to the referenced VAR and FUNC kinds. Other kinds, like STRUCT/UNION/FUNC/ENUM, encode member names directly and thus are clearly identifiable in BTF dump. The new output looks like this: [35] DATASEC '.bss' size=0 vlen=6 type_id=8 offset=0 size=4 (VAR 'input_bss1') type_id=13 offset=0 size=4 (VAR 'input_bss_weak') type_id=16 offset=0 size=4 (VAR 'output_bss1') type_id=17 offset=0 size=4 (VAR 'output_data1') type_id=18 offset=0 size=4 (VAR 'output_rodata1') type_id=20 offset=0 size=8 (VAR 'output_sink1') [36] DATASEC '.data' size=0 vlen=2 type_id=9 offset=0 size=4 (VAR 'input_data1') type_id=14 offset=0 size=4 (VAR 'input_data_weak') [37] DATASEC '.kconfig' size=0 vlen=2 type_id=25 offset=0 size=4 (VAR 'LINUX_KERNEL_VERSION') type_id=28 offset=0 size=1 (VAR 'CONFIG_BPF_SYSCALL') [38] DATASEC '.ksyms' size=0 vlen=1 type_id=30 offset=0 size=1 (VAR 'bpf_link_fops') [39] DATASEC '.rodata' size=0 vlen=2 type_id=12 offset=0 size=4 (VAR 'input_rodata1') type_id=15 offset=0 size=4 (VAR 'input_rodata_weak') [40] DATASEC 'license' size=0 vlen=1 type_id=24 offset=0 size=4 (VAR 'LICENSE') Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.