| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Update to kunit_parser to improve compatibility with KTAP
specification including arbitrarily nested tests. Patch accomplishes
three major changes:
- Use a general Test object to represent all tests rather than TestCase
and TestSuite objects. This allows for easier implementation of arbitrary
levels of nested tests and promotes the idea that both test suites and test
cases are tests.
- Print errors incrementally rather than all at once after the
parsing finishes to maximize information given to the user in the
case of the parser given invalid input and to increase the helpfulness
of the timestamps given during printing. Note that kunit.py parse does
not print incrementally yet. However, this fix brings us closer to
this feature.
- Increase compatibility for different formats of input. Arbitrary levels
of nested tests supported. Also, test cases and test suites are now
supported to be present on the same level of testing.
This patch now implements the draft KTAP specification here:
https://lore.kernel.org/linux-kselftest/CA+GJov6tdjvY9x12JsJT14qn6c7NViJxqaJk+r-K1YJzPggFDQ@mail.gmail.com/
We'll update the parser as the spec evolves.
This patch adjusts the kunit_tool_test.py file to check for
the correct outputs from the new parser and adds a new test to check
the parsing for a KTAP result log with correct format for multiple nested
subtests (test_is_test_passed-all_passed_nested.log).
This patch also alters the kunit_json.py file to allow for arbitrarily
nested tests.
Signed-off-by: Rae Moar <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Currently, `run_kernel()` dumps all the kernel output to a file
(.kunit/test.log) and then opens the file and yields it to callers.
This made it easier to respect the requested timeout, if any.
But it means that we can't yield the results in real time, either to the
parser or to stdout (if --raw_output is set).
This change spins up a background thread to enforce the timeout, which
allows us to yield the kernel output in real time, while also copying it
to the .kunit/test.log file.
It's also careful to ensure that the .kunit/test.log file is complete,
even in the kunit_parser throws an exception/otherwise doesn't consume
every line, see the new `finally` block and unit test.
For example:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --raw_output
<configure + build steps>
...
<can now see output from QEMU in real time>
This does not currently have a visible effect when --raw_output is not
passed, as kunit_parser.py currently only outputs everything at the end.
But that could change, and this patch is a necessary step towards
showing parsed test results in real time.
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The new --run_isolated flag makes the tool boot the kernel once per
suite or test, preventing leftover state from one suite to impact the
other. This can be useful as a starting point to debugging test
hermeticity issues.
Note: it takes a lot longer, so people should not use it normally.
Consider the following very simplified example:
bool disable_something_for_test = false;
void function_being_tested() {
...
if (disable_something_for_test) return;
...
}
static void test_before(struct kunit *test)
{
disable_something_for_test = true;
function_being_tested();
/* oops, we forgot to reset it back to false */
}
static void test_after(struct kunit *test)
{
/* oops, now "fixing" test_before can cause test_after to fail! */
function_being_tested();
}
Presented like this, the issues are obvious, but it gets a lot more
complicated to track down as the amount of test setup and helper
functions increases.
Another use case is memory corruption. It might not be surfaced as a
failure/crash in the test case or suite that caused it. I've noticed in
kunit's own unit tests, the 3rd suite after might be the one to finally
crash after an out-of-bounds write, for example.
Example usage:
Per suite:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit --run_isolated=suite
...
Starting KUnit Kernel (1/7)...
============================================================
======== [PASSED] kunit_executor_test ========
....
Testing complete. 5 tests run. 0 failed. 0 crashed. 0 skipped.
Starting KUnit Kernel (2/7)...
============================================================
======== [PASSED] kunit-try-catch-test ========
...
Per test:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit --run_isolated=test
Starting KUnit Kernel (1/23)...
============================================================
======== [PASSED] kunit_executor_test ========
[PASSED] parse_filter_test
============================================================
Testing complete. 1 tests run. 0 failed. 0 crashed. 0 skipped.
Starting KUnit Kernel (2/23)...
============================================================
======== [PASSED] kunit_executor_test ========
[PASSED] filter_subsuite_test
...
It works with filters as well:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit --run_isolated=suite example
...
Starting KUnit Kernel (1/1)...
============================================================
======== [PASSED] example ========
...
It also handles test filters, '*.*skip*' runs these 3 tests:
kunit_status.kunit_status_mark_skipped_test
example.example_skip_test
example.example_mark_skipped_test
Fixed up merge conflict between:
d8c23ead708b ("kunit: tool: better handling of quasi-bool args (--json, --raw_output)") and
6710951ee039 ("kunit: tool: support running each suite/test separately")
Reported-by: Stephen Rothwell <[email protected]>
Shuah Khan <[email protected]>
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This is a long standing bug in kunit tool.
Since these files were added, run_kernel() has always yielded lines.
That means, the call to run_kernel() returns before the kernel finishes
executing tests, potentially before a single line of output is even
produced.
So code like this
time_start = time.time()
result = linux.run_kernel(...)
time_end = time.time()
would only measure the time taken for python to give back the generator
object.
From a caller's perspective, the only way to know the kernel has exited
is for us to consume all the output from the `result` generator object.
Alternatively, we could change run_kernel() to try and do its own book
keeping and return the total time, but that doesn't seem worth it.
This change makes us record `time_end` after we're done parsing all the
output (which should mean we've consumed all of it, or errored out).
That means we're including in the parsing time as well, but that should
be quite small, and it's better than claiming it took 0s to run tests.
Let's use this as an example:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit example
Before:
Elapsed time: 7.684s total, 0.001s configuring, 4.692s building, 0.000s running
After:
Elapsed time: 6.283s total, 0.001s configuring, 3.202s building, 3.079s running
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Currently this code is copy-pasted between the normal "run" subcommand
and the "exec" subcommand.
Given we don't have any interest in just executing the tests without
giving the user any indication what happened (i.e. parsing the output),
make a function that does both this things and can be reused.
This will be useful when we allow more complicated ways of running
tests, e.g. invoking the kernel multiple times instead of just once,
etc.
We remove input_data from the ParseRequest so the callers don't have to
pass in a dummy value for this field. Named tuples are also immutable,
so if they did pass in a dummy, exec_tests() would need to make a copy
to call parse_tests().
Removing it also makes KunitParseRequest match the other *Request types,
as they only contain user arguments/flags, not data.
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Acked-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Consider this attempt to run KUnit in QEMU:
$ ./tools/testing/kunit/kunit.py run --arch=x86
Before you'd get this error message:
kunit_kernel.ConfigError: x86 is not a valid arch
After:
kunit_kernel.ConfigError: x86 is not a valid arch, options are ['alpha', 'arm', 'arm64', 'i386', 'powerpc', 'riscv', 's390', 'sparc', 'x86_64']
This should make it a bit easier for people to notice when they make
typos, etc. Currently, one would have to dive into the python code to
figure out what the valid set is.
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Drop some variables in unit tests that were unused and/or add assertions
based on them.
For ExitStack, it was imported, but the `es` variable wasn't used so it
didn't do anything, and we were leaking the file objects.
Refactor it to just use nested `with` statements to properly close them.
And drop the direct use of .close() on file objects in the kunit tool
unit test, as these can be leaked if test assertions fail.
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Commit 1d71307a6f94 ("kunit: add unit test for filtering suites by
names") introduced the ability to filter which suites we run via glob.
This change extends it so we can also filter individual test cases
inside of suites as well.
This is quite useful when, e.g.
* trying to run just the tests cases you've just added or are working on
* trying to debug issues with test hermeticity
Examples:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit '*exec*.parse*'
...
============================================================
======== [PASSED] kunit_executor_test ========
[PASSED] parse_filter_test
============================================================
Testing complete. 1 tests run. 0 failed. 0 crashed.
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit '*.no_matching_tests'
...
[ERROR] no tests run!
Signed-off-by: Daniel Latypov <[email protected]>
Reviewed-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Update section headers before the respective relocations to not
trigger a safety check in elftoolchain's implementation of libelf
- Do not add garbage data to the .rela.orc_unwind_ip section
* tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Update section header before relocations
objtool: Check for gelf_update_rel[a] failures
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'perf test evsel' build error on !x86 architectures
- Fix libperf's test_stat_cpu mixup of CPU numbers and CPU indexes
- Output offsets for decompressed records, not just useless zeros
* tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
libperf tests: Fix test_stat_cpu
libperf test evsel: Fix build error on !x86 architectures
perf report: Output non-zero offset for decompressed records
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Tracing fixes for 5.15:
- Fix defined but not use warning/error for osnoise function
- Fix memory leak in event probe
- Fix memblock leak in bootconfig
- Fix the API of event probes to be like kprobes
- Added test to check removal of event probe API
- Fix recordmcount.pl for nds32 failed build
* tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'
selftests/ftrace: Update test for more eprobe removal process
tracing: Fix event probe removal from dynamic events
tracing: Fix missing * in comment block
bootconfig: init: Fix memblock leak in xbc_make_cmdline()
tracing: Fix memory leak in eprobe_register()
tracing: Fix missing osnoise tracer on max_latency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Quite calm.
The noisy DSA driver (embedded switches) changes, and adjustment to
IPv6 IOAM behavior add to diffstat's bottom line but are not scary.
Current release - regressions:
- af_unix: rename UNIX-DGRAM to UNIX to maintain backwards
compatibility
- procfs: revert "add seq_puts() statement for dev_mcast", minor
format change broke user space
Current release - new code bugs:
- dsa: fix bridge_num not getting cleared after ports leaving the
bridge, resource leak
- dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware
bridges using VID 0, prevent packet drops if pvid is removed
- dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW
getting confused about station to VLAN mapping
Previous releases - regressions:
- virtio-net: fix for skb_over_panic inside big mode
- phy: do not shutdown PHYs in READY state
- dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link
LED staying lit after ifdown
- mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL)
- mqprio: Correct stats in mqprio_dump_class_stats()
- ice: fix deadlock for Tx timestamp tracking flush
- stmmac: fix feature detection on old hardware
Previous releases - always broken:
- sctp: account stream padding length for reconf chunk
- icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe()
- isdn: cpai: check ctr->cnr to avoid array index out of bound
- isdn: mISDN: fix sleeping function called from invalid context
- nfc: nci: fix potential UAF of rf_conn_info object
- dsa: microchip: prevent ksz_mib_read_work from kicking back in
after it's canceled in .remove and crashing
- dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged
ports
- dsa: sja1105, ocelot: break circular dependency between switch and
tag drivers
- dsa: felix: improve timestamping in presence of packe loss
- mlxsw: thermal: fix out-of-bounds memory accesses
Misc:
- ipv6: ioam: move the check for undefined bits to improve
interoperability"
* tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe
MAINTAINERS: Update the devicetree documentation path of imx fec driver
sctp: account stream padding length for reconf chunk
mlxsw: thermal: Fix out-of-bounds memory accesses
ethernet: s2io: fix setting mac address during resume
NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
nfc: fix error handling of nfc_proto_register()
Revert "net: procfs: add seq_puts() statement for dev_mcast"
net: encx24j600: check error in devm_regmap_init_encx24j600
net: korina: select CRC32
net: arc: select CRC32
net: dsa: felix: break at first CPU port during init and teardown
net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports
net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent
net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib
net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver
net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header
net: mscc: ocelot: deny TX timestamping of non-PTP packets
net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb
...
|
|
The `cpu` argument of perf_evsel__read() must specify the cpu index.
perf_cpu_map__for_each_cpu() is for iterating the cpu number (not index)
and is thus not appropriate for use with perf_evsel__read().
So, if there is an offline CPU, the cpu number specified in the argument
may point out of range because the cpu number and the cpu index are
different.
Fix test_stat_cpu().
Testing it:
# make tests -C tools/lib/perf/
make: Entering directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'
running static:
- running tests/test-cpumap.c...OK
- running tests/test-threadmap.c...OK
- running tests/test-evlist.c...OK
- running tests/test-evsel.c...OK
running dynamic:
- running tests/test-cpumap.c...OK
- running tests/test-threadmap.c...OK
- running tests/test-evlist.c...OK
- running tests/test-evsel.c...OK
make: Leaving directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'
Signed-off-by: Shunsuke Nakamura <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In test_stat_user_read, following build error occurs except i386 and
x86_64 architectures:
tests/test-evsel.c:129:31: error: variable 'pc' set but not used [-Werror=unused-but-set-variable]
struct perf_event_mmap_page *pc;
Fix build error.
Signed-off-by: Shunsuke Nakamura <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Print offset of PERF_RECORD_COMPRESSED record instead of zero for
decompressed records in raw trace dump (-D option of perf-report):
0x17cf08 [0x28]: event: 9
instead of:
0 [0x28]: event: 9
The fix is not critical, because currently file_pos for compressed
events is used in perf_session__process_event only to show offsets
in the raw dump.
This patch was separated from patchset:
https://lore.kernel.org/lkml/[email protected]/
and was already rewieved.
Reviewed-by: Riccardo Mancini <[email protected]>
Signed-off-by: Alexey Bayduraev <[email protected]>
Tested-by: Riccardo Mancini <[email protected]>
Acked-by: Andi Kleen <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Antonov <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Budankov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The removal of eprobes was broken and missed in testing. Add various ways
to remove eprobes that are considered acceptable to the testing process to
catch when/if they break again.
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
The output behavior for undefined bits is now directly tested inside the bash
script. Trying to set an undefined bit should be refused.
The input behavior for undefined bits has been removed due to the fact that we
would need another sender allowed to set undefined bits.
Signed-off-by: Justin Iurman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
- Fixes to address the structleak plugin causing the stack frame size
to grow immensely when used with KUnit. Fixes include adding a new
makefile to disable structleak and using it from KUnit iio, device
property, thunderbolt, and bitfield tests to disable it.
- KUnit framework reference count leak in kfree_at_end
- KUnit tool fix to resolve conflict between --json and --raw_output
and generate correct test output in either case.
- kernel-doc warnings due to mismatched arg names
* tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix kernel-doc warnings due to mismatched arg names
bitfield: build kunit tests without structleak plugin
thunderbolt: build kunit tests without structleak plugin
device property: build kunit tests without structleak plugin
iio/test-format: build kunit tests without structleak plugin
gcc-plugins/structleak: add makefile var for disabling structleak
kunit: fix reference count leak in kfree_at_end
kunit: tool: better handling of quasi-bool args (--json, --raw_output)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Remove an extra section.len member in favour of section.sh_size
- Align .altinstructions section creation with the kernel's by creating
them with entry size of 0
- Fix objtool to convert a reloc symbol to a section offset and not to
not warn about not knowing how
* tag 'objtool_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Remove redundant 'len' field from struct section
objtool: Make .altinstructions section entry size consistent
objtool: Remove reloc symbol type checks in get_alt_entry()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix plugin static linking with libopencsd on ARM and ARM64
- Add missing -lstdc++ when linking with libopencsd
- Add missing topdown metrics events to 'perf test attr'
- Plug leak sys_event_tables list after processing JSON vendor events
entries
- Sync sound/asound.h copy with the kernel sources
* tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tests attr: Add missing topdown metrics events
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf build: Fix plugin static linking with libopencsd on ARM and ARM64
perf build: Add missing -lstdc++ when linking with libopencsd
perf jevents: Free the sys_event_tables list after processing entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from xfrm, bpf, netfilter, and wireless.
Current release - regressions:
- xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new
value in the middle of an enum
- unix: fix an issue in unix_shutdown causing the other end
read/write failures
- phy: mdio: fix memory leak
Current release - new code bugs:
- mlx5e: improve MQPRIO resiliency against bad configs
Previous releases - regressions:
- bpf: fix integer overflow leading to OOB access in map element
pre-allocation
- stmmac: dwmac-rk: fix ethernet on rk3399 based devices
- netfilter: conntrack: fix boot failure with
nf_conntrack.enable_hooks=1
- brcmfmac: revert using ISO3166 country code and 0 rev as fallback
- i40e: fix freeing of uninitialized misc IRQ vector
- iavf: fix double unlock of crit_lock
Previous releases - always broken:
- bpf, arm: fix register clobbering in div/mod implementation
- netfilter: nf_tables: correct issues in netlink rule change event
notifications
- dsa: tag_dsa: fix mask for trunked packets
- usb: r8152: don't resubmit rx immediately to avoid soft lockup on
device unplug
- i40e: fix endless loop under rtnl if FW fails to correctly respond
to capability query
- mlx5e: fix rx checksum offload coexistence with ipsec offload
- mlx5: force round second at 1PPS out start time and allow it only
in supported clock modes
- phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable
sequence
Misc:
- xfrm: slightly rejig the new policy uAPI to make it less cryptic"
* tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
net: prefer socket bound to interface when not in VRF
iavf: fix double unlock of crit_lock
i40e: Fix freeing of uninitialized misc IRQ vector
i40e: fix endless loop under rtnl
dt-bindings: net: dsa: marvell: fix compatible in example
ionic: move filter sync_needed bit set
gve: report 64bit tx_bytes counter from gve_handle_report_stats()
gve: fix gve_get_stats()
rtnetlink: fix if_nlmsg_stats_size() under estimation
gve: Properly handle errors in gve_assign_qpl
gve: Avoid freeing NULL pointer
gve: Correct available tx qpl check
unix: Fix an issue in unix_shutdown causing the other end read/write failures
net: stmmac: trigger PCS EEE to turn off on link down
net: pcs: xpcs: fix incorrect steps on disable EEE
netlink: annotate data races around nlk->bound
net: pcs: xpcs: fix incorrect CL37 AN sequence
net: sfp: Fix typo in state machine debug string
net/sched: sch_taprio: properly cancel timer from taprio_destroy()
net: bridge: fix under estimation in br_get_linkxstats_size()
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-10-07
We've added 7 non-merge commits during the last 8 day(s) which contain
a total of 8 files changed, 38 insertions(+), 21 deletions(-).
The main changes are:
1) Fix ARM BPF JIT to preserve caller-saved regs for DIV/MOD JIT-internal
helper call, from Johan Almbladh.
2) Fix integer overflow in BPF stack map element size calculation when
used with preallocation, from Tatsuhiko Yasumatsu.
3) Fix an AF_UNIX regression due to added BPF sockmap support related
to shutdown handling, from Jiang Wang.
4) Fix a segfault in libbpf when generating light skeletons from objects
without BTF, from Kumar Kartikeya Dwivedi.
5) Fix a libbpf memory leak in strset to free the actual struct strset
itself, from Andrii Nakryiko.
6) Dual-license bpf_insn.h similarly as we did for libbpf and bpftool,
with ACKs from all contributors, from Luca Boccassi.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The libelf implementation from elftoolchain has a safety check in
gelf_update_rel[a] to check that the data corresponds to a section
that has type SHT_REL[A] [0]. If the relocation is updated before
the section header is updated with the proper type, this check
fails.
To fix this, update the section header first, before the relocations.
Previously, the section size was calculated in elf_rebuild_reloc_section
by counting the number of entries in the reloc_list. However, we
now need the size during elf_write so instead keep a running total
and add to it for every new relocation.
[0] https://sourceforge.net/p/elftoolchain/mailman/elftoolchain-developers/thread/CAGw6cBtkZro-8wZMD2ULkwJ39J+tHtTtAWXufMjnd3cQ7XG54g@mail.gmail.com/
Signed-off-by: Michael Forney <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Otherwise, if these fail we end up with garbage data in the
.rela.orc_unwind_ip section, leading to errors like
ld: fs/squashfs/namei.o: bad reloc symbol index (0x7f16 >= 0x12) for offset 0x7f16d5c82cc8 in section `.orc_unwind_ip'
Signed-off-by: Michael Forney <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The section structure already contains sh_size, so just remove the extra
'len' member that requires extra mirroring and potential confusion.
Suggested-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Joe Lawrence <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Andy Lavr <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: [email protected]
|
|
Commit e31694e0a7a7 ("objtool: Don't make .altinstructions writable")
aligned objtool-created and kernel-created .altinstructions section
flags, but there remains a minor discrepency in their use of a section
entry size: objtool sets one while the kernel build does not.
While sh_entsize of sizeof(struct alt_instr) seems intuitive, this small
deviation can cause failures with external tooling (kpatch-build).
Fix this by creating new .altinstructions sections with sh_entsize of 0
and then later updating sec->sh_size as alternatives are added to the
section. An added benefit is avoiding the data descriptor and buffer
created by elf_create_section(), but previously unused by
elf_add_alternative().
Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls")
Signed-off-by: Joe Lawrence <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Andy Lavr <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: [email protected]
|
|
Converting a special section's relocation reference to a symbol is
straightforward. No need for objtool to complain that it doesn't know
how to handle it. Just handle it.
This fixes the following warning:
arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception
Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types")
Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/feadbc3dfb3440d973580fad8d3db873cbfe1694.1633367242.git.jpoimboe@redhat.com
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: Miroslav Benes <[email protected]>
Cc: [email protected]
|
|
The Topdown metrics events were added as 'perf stat' default events
since commit 42641d6f4d15e6db ("perf stat: Add Topdown metrics events as
default events").
However, the perf attr tests were not updated
accordingly.
The perf attr test fails on the platform which supports Topdown metrics.
# perf test 17
17: Setup struct perf_event_attr :FAILED!
Add Topdown metrics events into perf attr test cases. Make them optional
since they are only available on newer platforms.
Fixes: 42641d6f4d15e6db ("perf stat: Add Topdown metrics events as default events")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Picking the changes from:
09d23174402da0f1 ("ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION")
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Filter out -static flag when building plugins as they are always built
as dynamic libraries and -static and -dynamic don't work well together
on arm and arm64.
Signed-off-by: Branislav Rankov <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Tamas Zsoldos <[email protected]>
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add -lstdc++ to perf when linking libopencsd as it is a dependency. It
does not hurt to add it when dynamic linking.
Signed-off-by: Branislav Rankov <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Tamas Zsoldos <[email protected]>
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The compiler reports that free_sys_event_tables() is dead code.
But according to the semantics, the "LIST_HEAD(sys_event_tables)" should
also be released, just like we do with 'arch_std_events' in main().
Fixes: e9d32c1bf0cd7a98 ("perf vendor events: Add support for arch standard events")
Signed-off-by: Like Xu <[email protected]>
Reviewed-by: John Garry <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"A fix to implicit declaration warns in drivers/dma-buf test"
* tag 'linux-kselftest-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: drivers/dma-buf: Fix implicit declaration warns
|
|
The objtool warning that the kvm instruction emulation code triggered
wasn't very useful:
arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception
in that it helpfully tells you which symbol name it had trouble figuring
out the relocation for, but it doesn't actually say what the unknown
symbol type was that triggered it all.
In this case it was because of missing type information (type 0, aka
STT_NOTYPE), but on the whole it really should just have printed that
out as part of the message.
Because if this warning triggers, that's very much the first thing you
want to know - why did reloc2sec_off() return failure for that symbol?
So rather than just saying you can't handle some type of symbol without
saying what the type _was_, just print out the type number too.
Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types")
Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
- Handle symbol relocations properly due to changes in the toolchains
which remove section symbols now
* tag 'objtool_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Teach get_alt_entry() about more relocation types
|
|
Free struct strset itself, not just its internal parts.
Fixes: 90d76d3ececc ("libbpf: Extract internal set-of-strings datastructure APIs")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Problem:
What does this do?
$ kunit.py run --json
Well, it runs all the tests and prints test results out as JSON.
And next is
$ kunit.py run my-test-suite --json
This runs just `my-test-suite` and prints results out as JSON.
But what about?
$ kunit.py run --json my-test-suite
This runs all the tests and stores the json results in a "my-test-suite"
file.
Why:
--json, and now --raw_output are actually string flags. They just have a
default value. --json in particular takes the name of an output file.
It was intended that you'd do
$ kunit.py run --json=my_output_file my-test-suite
if you ever wanted to specify the value.
Workaround:
It doesn't seem like there's a way to make
https://docs.python.org/3/library/argparse.html only accept arg values
after a '='.
I believe that `--json` should "just work" regardless of where it is.
So this patch automatically rewrites a bare `--json` to `--json=stdout`.
That makes the examples above work the same way.
Add a regression test that can catch this for --raw_output.
Fixes: 6a499c9c42d0 ("kunit: tool: make --raw_output support only showing kunit output")
Signed-off-by: Daniel Latypov <[email protected]>
Tested-by: David Gow <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Pull more kvm fixes from Paolo Bonzini:
"Small x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Ensure all migrations are performed when test is affined
KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks
ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm
x86/kvmclock: Move this_cpu_pvti into kvmclock.h
selftests: KVM: Don't clobber XMM register when read
KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue
|
|
Occasionally objtool encounters symbol (as opposed to section)
relocations in .altinstructions. Typically they are the alternatives
written by elf_add_alternative() as encountered on a noinstr
validation run on vmlinux after having already ran objtool on the
individual .o files.
Basically this is the counterpart of commit 44f6a7c0755d ("objtool:
Fix seg fault with Clang non-section symbols"), because when these new
assemblers (binutils now also does this) strip the section symbols,
elf_add_reloc_to_insn() is forced to emit symbol based relocations.
As such, teach get_alt_entry() about different relocation types.
Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls")
Reported-by: Stephen Rothwell <[email protected]>
Reported-by: Borislav Petkov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, netfilter and bpf.
Current release - regressions:
- bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
interrupt
- mdio: revert mechanical patches which broke handling of optional
resources
- dev_addr_list: prevent address duplication
Previous releases - regressions:
- sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
(NULL deref)
- Revert "mac80211: do not use low data rates for data frames with no
ack flag", fixing broadcast transmissions
- mac80211: fix use-after-free in CCMP/GCMP RX
- netfilter: include zone id in tuple hash again, minimize collisions
- netfilter: nf_tables: unlink table before deleting it (race -> UAF)
- netfilter: log: work around missing softdep backend module
- mptcp: don't return sockets in foreign netns
- sched: flower: protect fl_walk() with rcu (race -> UAF)
- ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup
- smsc95xx: fix stalled rx after link change
- enetc: fix the incorrect clearing of IF_MODE bits
- ipv4: fix rtnexthop len when RTA_FLOW is present
- dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
SKU
- e100: fix length calculation & buffer overrun in ethtool::get_regs
Previous releases - always broken:
- mac80211: fix using stale frag_tail skb pointer in A-MSDU tx
- mac80211: drop frames from invalid MAC address in ad-hoc mode
- af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
-> UAF)
- bpf, x86: Fix bpf mapping of atomic fetch implementation
- bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog
- netfilter: ip6_tables: zero-initialize fragment offset
- mhi: fix error path in mhi_net_newlink
- af_unix: return errno instead of NULL in unix_create1() when over
the fs.file-max limit
Misc:
- bpf: exempt CAP_BPF from checks against bpf_jit_limit
- netfilter: conntrack: make max chain length random, prevent
guessing buckets by attackers
- netfilter: nf_nat_masquerade: make async masq_inet6_event handling
generic, defer conntrack walk to work queue (prevent hogging RTNL
lock)"
* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
net: stmmac: fix EEE init issue when paired with EEE capable PHYs
net: dev_addr_list: handle first address in __hw_addr_add_ex
net: sched: flower: protect fl_walk() with rcu
net: introduce and use lock_sock_fast_nested()
net: phy: bcm7xxx: Fixed indirect MMD operations
net: hns3: disable firmware compatible features when uninstall PF
net: hns3: fix always enable rx vlan filter problem after selftest
net: hns3: PF enable promisc for VF when mac table is overflow
net: hns3: fix show wrong state when add existing uc mac address
net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
net: hns3: don't rollback when destroy mqprio fail
net: hns3: remove tc enable checking
net: hns3: do not allow call hns3_nic_net_open repeatedly
ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
net: bridge: mcast: Associate the seqcount with its protecting lock.
net: mdio-ipq4019: Fix the error for an optional regs resource
net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
net: mdio: mscc-miim: Fix the mdio controller
af_unix: Return errno instead of NULL in unix_create1().
...
|
|
When fed an empty BPF object, bpftool gen skeleton -L crashes at
btf__set_fd() since it assumes presence of obj->btf, however for
the sequence below clang adds no .BTF section (hence no BTF).
Reproducer:
$ touch a.bpf.c
$ clang -O2 -g -target bpf -c a.bpf.c
$ bpftool gen skeleton -L a.bpf.o
/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */
/* THIS FILE IS AUTOGENERATED! */
struct a_bpf {
struct bpf_loader_ctx ctx;
Segmentation fault (core dumped)
The same occurs for files compiled without BTF info, i.e. without
clang's -g flag.
Fixes: 67234743736a (libbpf: Generate loader program out of BPF ELF file.)
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Rework the CPU selection in the migration worker to ensure the specified
number of migrations are performed when the test iteslf is affined to a
subset of CPUs. The existing logic skips iterations if the target CPU is
not in the original set of possible CPUs, which causes the test to fail
if too many iterations are skipped.
==== Test Assertion Failure ====
rseq_test.c:228: i > (NR_TASK_MIGRATIONS / 2)
pid=10127 tid=10127 errno=4 - Interrupted system call
1 0x00000000004018e5: main at rseq_test.c:227
2 0x00007fcc8fc66bf6: ?? ??:0
3 0x0000000000401959: _start at ??:?
Only performed 4 KVM_RUNs, task stalled too much?
Calculate the min/max possible CPUs as a cheap "best effort" to avoid
high runtimes when the test is affined to a small percentage of CPUs.
Alternatively, a list or xarray of the possible CPUs could be used, but
even in a horrendously inefficient setup, such optimizations are not
needed because the runtime is completely dominated by the cost of
migrating the task, and the absolute runtime is well under a minute in
even truly absurd setups, e.g. running on a subset of vCPUs in a VM that
is heavily overcommited (16 vCPUs per pCPU).
Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Reported-by: Dongli Zhang <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
There is no need to clobber a register that is only being read from.
Oops. Drop the XMM register from the clobbers list.
Signed-off-by: Oliver Upton <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-28
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).
The main changes are:
1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.
2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.
3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.
4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.
5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.
6) Fix return value handling for struct_ops BPF programs, from Hou Tao.
7) Various fixes to BPF selftests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <[email protected]>
,
|
|
It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override
a greater rp_filter value on the individual interfaces. We also need to set
net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way,
they'll also get their own rp_filter value of zero.
Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Jiri Benc <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/b1cdd9d469f09ea6e01e9c89a6071c79b7380f89.1632386362.git.jbenc@redhat.com
|
|
When building bpf selftest with make -j, I'm randomly getting build failures
such as this one:
In file included from progs/bpf_flow.c:19:
[...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
#include "bpf_helper_defs.h"
^~~~~~~~~~~~~~~~~~~
The file that fails the build varies between runs but it's always in the
progs/ subdir.
The reason is a missing make dependency on libbpf for the .o files in
progs/. There was a dependency before commit 3ac2e20fba07e but that commit
removed it to prevent unneeded rebuilds. However, that only works if libbpf
has been built already; the 'wildcard' prerequisite does not trigger when
there's no bpf_helper_defs.h generated yet.
Keep the libbpf as an order-only prerequisite to satisfy both goals. It is
always built before the progs/ objects but it does not trigger unnecessary
rebuilds by itself.
Fixes: 3ac2e20fba07e ("selftests/bpf: BPF object files should depend only on libbpf headers")
Signed-off-by: Jiri Benc <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com
|
|
When a BPF object is compiled without BTF info (without -g),
trying to link such objects using bpftool causes a SIGSEGV due to
btf__get_nr_types accessing obj->btf which is NULL. Fix this by
checking for the NULL pointer, and return error.
Reproducer:
$ cat a.bpf.c
extern int foo(void);
int bar(void) { return foo(); }
$ cat b.bpf.c
int foo(void) { return 0; }
$ clang -O2 -target bpf -c a.bpf.c
$ clang -O2 -target bpf -c b.bpf.c
$ bpftool gen obj out a.bpf.o b.bpf.o
Segmentation fault (core dumped)
After fix:
$ bpftool gen obj out a.bpf.o b.bpf.o
libbpf: failed to find BTF info for object 'a.bpf.o'
Error: failed to link 'a.bpf.o': Unknown error -22 (-22)
Fixes: a46349227cd8 (libbpf: Add linker extern resolution support for functions and global variables)
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'perf test' DWARF unwind for optimized builds.
- Fix 'perf test' 'Object code reading' when dealing with samples in
@plt symbols.
- Fix off-by-one directory paths in the ARM support code.
- Fix error message to eliminate confusion in 'perf config' when first
creating a config file.
- 'perf iostat' fix for system wide operation.
- Fix printing of metrics when 'perf iostat' is used with one or more
iio_root_ports and unconnected cpus (using -C).
- Fix several typos in the documentation files.
- Fix spelling mistake "icach" -> "icache" in the power8 JSON vendor
files.
* tag 'perf-tools-fixes-for-v5.15-2021-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf iostat: Fix Segmentation fault from NULL 'struct perf_counts_values *'
perf iostat: Use system-wide mode if the target cpu_list is unspecified
perf config: Refine error message to eliminate confusion
perf doc: Fix typos all over the place
perf arm: Fix off-by-one directory paths.
perf vendor events powerpc: Fix spelling mistake "icach" -> "icache"
perf tests: Fix flaky test 'Object code reading'
perf test: Fix DWARF unwind for optimized builds.
|
|
Pull kvm fixes from Paolo Bonzini:
"A bit late... I got sidetracked by back-from-vacation routines and
conferences. But most of these patches are already a few weeks old and
things look more calm on the mailing list than what this pull request
would suggest.
x86:
- missing TLB flush
- nested virtualization fixes for SMM (secure boot on nested
hypervisor) and other nested SVM fixes
- syscall fuzzing fixes
- live migration fix for AMD SEV
- mirror VMs now work for SEV-ES too
- fixes for reset
- possible out-of-bounds access in IOAPIC emulation
- fix enlightened VMCS on Windows 2022
ARM:
- Add missing FORCE target when building the EL2 object
- Fix a PMU probe regression on some platforms
Generic:
- KCSAN fixes
selftests:
- random fixes, mostly for clang compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
selftests: KVM: Explicitly use movq to read xmm registers
selftests: KVM: Call ucall_init when setting up in rseq_test
KVM: Remove tlbs_dirty
KVM: X86: Synchronize the shadow pagetable before link it
KVM: X86: Fix missed remote tlb flush in rmap_write_protect()
KVM: x86: nSVM: don't copy virt_ext from vmcb12
KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround
KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0
KVM: x86: nSVM: restore int_vector in svm_clear_vintr
kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[]
KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit
KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry
KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state
KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm
KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode
KVM: x86: reset pdptrs_from_userspace when exiting smm
KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit
KVM: nVMX: Filter out all unsupported controls when eVMCS was activated
KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs
KVM: Clean up benign vcpu->cpu data races when kicking vCPUs
...
|
|
udmabuf has the following implicit declaration warns:
udmabuf.c:30:10: warning: implicit declaration of function 'open';
udmabuf.c:42:8: warning: implicit declaration of function 'fcntl'
These are caused due to not including fcntl.h and including just
linux/fcntl.h. Fix it to include fcntl.h which will bring in the
linux/fcntl.h. In addition, define __EXPORTED_HEADERS__ to bring in
F_ADD_SEALS and F_SEAL_SHRINK defines and fix the following error
that show up when just fcntl.h is included.
udmabuf.c:45:21: error: 'F_ADD_SEALS' undeclared
45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK);
| ^~~~~~~~~~~
udmabuf.c:45:34: error: 'F_SEAL_SHRINK' undeclared
45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK);
| ^~~~~~~~~~~~~
Signed-off-by: Shuah Khan <[email protected]>
|