| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
thuge-gen was previously only munmapping part of the mmapped buffer, which
caused us to run out of 1G huge pages for a later part of the test. Fix
this by munmapping the whole buffer. Based on the code, it looks like a
typo rather than an intention to keep some of the buffer mapped.
thuge-gen was also calling mmap with SHM_HUGETLB flag (bit 11 set), which
is actually MAP_DENYWRITE in mmap context. The man page says this flag is
ignored in modern kernels. I'm pretty sure from the context that the
author intended to pass the MAP_HUGETLB flag so I've fixed that up too.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryan Roberts <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Jérôme Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
mrelease_test defaults to defining __NR_pidfd_open and
__NR_process_mrelease syscall numbers to -1, if they are not defined
anywhere else, and the suite would then be marked as skipped as a result.
arm64 (at least the stock debian toolchain that I'm using) requires
including <sys/syscall.h> to pull in the defines for these syscalls. So
let's add this header. With this in place, the test is passing on arm64.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryan Roberts <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Jérôme Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
arm64 does not support the soft-dirty PTE bit. However, the `soft-dirty`
test suite is currently run unconditionally and therefore generates
spurious test failures on arm64. There are also some tests in
`madv_populate` which assume it is supported.
For `soft-dirty` lets disable the whole suite for arm64; it is no longer
built and run_vmtests.sh will skip it if its not present.
For `madv_populate`, we need a runtime mechanism so that the remaining
tests continue to be run. Unfortunately, the only way to determine if the
soft-dirty dirty bit is supported is to write to a page, then see if the
bit is set in /proc/self/pagemap. But the tests that we want to
conditionally execute are testing precicesly this. So if we introduced
this feature check, we could accedentally turn a real failure (on a system
that claims to support soft-dirty) into a skip. So instead, do the check
based on architecture; for arm64, we report that soft-dirty is not
supported.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryan Roberts <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Jérôme Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "selftests/mm fixes for arm64", v3.
Given my on-going work on large anon folios and contpte mappings, I
decided it would be a good idea to start running mm selftests to help
guard against regressions. However, it soon became clear that I
couldn't get the suite to run cleanly on arm64 with a vanilla v6.5-rc1
kernel (perhaps I'm just doing it wrong??), so got stuck in a rabbit
hole trying to debug and fix all the issues. Some were down to
misconfigurations, but I also found a number of issues with the tests
and even a couple of issues with the kernel.
This patch (of 8):
The selftests runner pipes the test program's stdout to tap_prefix. The
presence of the pipe means that the test program sets its stdout to be
fully buffered (as aposed to line buffered when directly connected to the
terminal). The block buffering means that there is often content in the
buffer at fork() time, which causes the output to end up duplicated. This
was causing problems for mm:cow where test results were duplicated 20-30x.
Solve this by using `stdbuf`, when available to force the test program to
use line buffered mode. This means previously printf'ed results are
flushed out of the program before any fork().
Additionally, explicitly set line buffer mode in ksft_print_header(),
which means that all test programs that use the ksft framework will
benefit even if stdbuf is not present on the system.
[[email protected]: add setvbuf() to set buffering mode]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryan Roberts <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Jérôme Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add tests for the improvement made to read operation on HWPOISON
hugetlb page with different read granularities. For each chunk size,
three read scenarios are tested:
1. Simple regression test on read without HWPOISON.
2. Sequential read page by page should succeed until encounters the 1st
raw HWPOISON subpage.
3. After skip a raw HWPOISON subpage by lseek, read()s always succeed.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiaqi Yan <[email protected]>
Acked-by: Mike Kravetz <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Cc: James Houghton <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Yang Shi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The test is pretty basic, and exercises UFFDIO_POISON straightforwardly.
We register a region with userfaultfd, in missing fault mode. For each
fault, we either UFFDIO_COPY a zeroed page (odd pages) or UFFDIO_POISON
(even pages). We do this mix to test "something like a real use case",
where guest memory would be some mix of poisoned and non-poisoned pages.
We read each page in the region, and assert that the odd pages are zeroed
as expected, and the even pages yield a SIGBUS as expected.
Why UFFDIO_COPY instead of UFFDIO_ZEROPAGE? Because hugetlb doesn't
support UFFDIO_ZEROPAGE, and we don't want to have special case code.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Axel Rasmussen <[email protected]>
Acked-by: Peter Xu <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Brian Geffon <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Gaosheng Cui <[email protected]>
Cc: Huang, Ying <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: James Houghton <[email protected]>
Cc: Jan Alexander Steffens (heftig) <[email protected]>
Cc: Jiaqi Yan <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Ryan Roberts <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Suleiman Souhlal <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: T.J. Alumbaugh <[email protected]>
Cc: Yu Zhao <[email protected]>
Cc: ZhangPeng <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Previously, we had "one fault handler to rule them all", which used
several branches to deal with all of the scenarios required by all of the
various tests.
In upcoming patches, I plan to add a new test, which has its own slightly
different fault handling logic. Instead of continuing to add cruft to the
existing fault handler, let's allow tests to define custom ones, separate
from other tests.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Axel Rasmussen <[email protected]>
Acked-by: Peter Xu <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Brian Geffon <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Gaosheng Cui <[email protected]>
Cc: Huang, Ying <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: James Houghton <[email protected]>
Cc: Jan Alexander Steffens (heftig) <[email protected]>
Cc: Jiaqi Yan <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Ryan Roberts <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Suleiman Souhlal <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: T.J. Alumbaugh <[email protected]>
Cc: Yu Zhao <[email protected]>
Cc: ZhangPeng <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add selftest for sysctl vm.memfd_noexec is 2
(MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED)
memfd_create(.., MFD_EXEC) should fail in this case.
Link: https://lkml.kernel.org/r/[email protected]
Reported-by: Dominique Martinet <[email protected]>
Closes: https://lore.kernel.org/linux-mm/CABi2SkXUX_QqTQ10Yx9bBUGpN1wByOi_=gZU6WEy5a8MaQY3Jw@mail.gmail.com/T/
Signed-off-by: Jeff Xu <[email protected]>
Cc: Daniel Verkamp <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jorge Lucangeli Obes <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: kernel test robot <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add a function test_unmerge_zero_page() to test the functionality on
unsharing and counting ksm-placed zero pages and counting of this patch
series.
test_unmerge_zero_page() actually contains four subjct test objects:
(1) whether the count of ksm zero pages can update correctly after merging;
(2) whether the count of ksm zero pages can update correctly after
unmerging by madvise(...MADV_UNMERGEABLE);
(3) whether the count of ksm zero pages can update correctly after
unmerging by triggering write fault.
(4) whether ksm zero pages are really unmerged.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: xu xin <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Reviewed-by: Xiaokai Ran <[email protected]>
Reviewed-by: Yang Yang <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: Xuexin Jiang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add a test to verify that when a memcg hits its limit in zswap, it doesn't
trigger an unwanted writeback that would result in pages not owned by that
memcg to be sent to disk, even if zswap isn't full. This was fixed by
commit 0bdf0efa180a("zswap: do not shrink if cgroup may not zswap").
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Domenico Cerasuolo <[email protected]>
Cc: Dan Streetman <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Nhat Pham <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Seth Jennings <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Vitaly Wool <[email protected]>
Cc: Zefan Li <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add a cgroup selftest that verifies memcg charging in zswap. The original
issue was that kmem bypass was applied to pages swapped out to zswap by
kswapd, resulting in zswapped memory not being charged. It was fixed by
commit cd08d80ecdac("mm: correctly charge compressed memory to its
memcg").
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Domenico Cerasuolo <[email protected]>
Cc: Dan Streetman <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Nhat Pham <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Seth Jennings <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Vitaly Wool <[email protected]>
Cc: Zefan Li <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "selftests: cgroup: add zswap test program".
This series adds 2 zswap related selftests that verify known and fixed
issues. A new dedicated test program (test_zswap) is proposed since the
test cases are specific to zswap and hosts specific helpers.
The first patch adds the (empty) test program, while the other 2 add an
actual test function each.
This patch (of 3):
Add empty cgroup-zswap self test scaffold program, test functions to be
added in the next commits.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Domenico Cerasuolo <[email protected]>
Cc: Dan Streetman <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Nhat Pham <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Seth Jennings <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Vitaly Wool <[email protected]>
Cc: Zefan Li <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add test for expanding range in RCU mode. If we use the fast path of the
slot store to expand range in RCU mode, this test will fail.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Peng Zhang <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add a matrix for testing gup based on the current gup_test. Only run the
matrix when -a is specified because it's a bit slow.
It covers:
- Different types of huge pages: thp, hugetlb, or no huge page
- Permissions: Write / Read-only
- Fast-gup, with/without
- Types of the GUP: pin / gup / longterm pins
- Shared / Private memories
- GUP size: 1 / 512 / random page sizes
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Peter Xu <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: James Houghton <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Kirill A . Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Yang Shi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Allows to specify optional tests in run_vmtests.sh, where we can run time
consuming test matrix only when user specified "-a".
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Peter Xu <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: James Houghton <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Kirill A . Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Yang Shi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic regression fix from Arnd Bergmann:
"Just one partial revert for a commit from the merge window that caused
annoying behavior when building old kernels on arm64 hosts"
* tag 'asm-generic-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: partially revert "Unify uapi bitsperlong.h for arm64, riscv and loongarch"
|
|
This patch adds selftests that exercise kfunc flavor relocation
functionality added in the previous patch. The actual kfunc defined
in kernel/bpf/helpers.c is:
struct task_struct *bpf_task_acquire(struct task_struct *p)
The following relocation behaviors are checked:
struct task_struct *bpf_task_acquire___one(struct task_struct *name)
* Should succeed despite differing param name
struct task_struct *bpf_task_acquire___two(struct task_struct *p, void *ctx)
* Should fail because there is no two-param bpf_task_acquire
struct task_struct *bpf_task_acquire___three(void *ctx)
* Should fail because, despite vmlinux's bpf_task_acquire having one param,
the types don't match
Signed-off-by: Dave Marchevsky <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: David Vernet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The function signature of kfuncs can change at any time due to their
intentional lack of stability guarantees. As kfuncs become more widely
used, BPF program writers will need facilities to support calling
different versions of a kfunc from a single BPF object. Consider this
simplified example based on a real scenario we ran into at Meta:
/* initial kfunc signature */
int some_kfunc(void *ptr)
/* Oops, we need to add some flag to modify behavior. No problem,
change the kfunc. flags = 0 retains original behavior */
int some_kfunc(void *ptr, long flags)
If the initial version of the kfunc is deployed on some portion of the
fleet and the new version on the rest, a fleetwide service that uses
some_kfunc will currently need to load different BPF programs depending
on which some_kfunc is available.
Luckily CO-RE provides a facility to solve a very similar problem,
struct definition changes, by allowing program writers to declare
my_struct___old and my_struct___new, with ___suffix being considered a
'flavor' of the non-suffixed name and being ignored by
bpf_core_type_exists and similar calls.
This patch extends the 'flavor' facility to the kfunc extern
relocation process. BPF program writers can now declare
extern int some_kfunc___old(void *ptr)
extern int some_kfunc___new(void *ptr, int flags)
then test which version of the kfunc exists with bpf_ksym_exists.
Relocation and verifier's dead code elimination will work in concert as
expected, allowing this pattern:
if (bpf_ksym_exists(some_kfunc___old))
some_kfunc___old(ptr);
else
some_kfunc___new(ptr, 0);
Signed-off-by: Dave Marchevsky <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: David Vernet <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The hwcaps selftest currently relies on the assembler being able to
assemble the crc32w instruction but this is not in the base v8.0 so is not
accepted by the standard GCC configurations used by many distributions.
Switch to manually encoding to fix the build.
Fixes: 09d2e95a04ad ("kselftest/arm64: add crc32 feature to hwcap test")
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add a mock_domain_hw_info function and an iommu_test_hw_info data
structure. This allows to test the IOMMU_GET_HW_INFO ioctl passing the
test_reg value for the mock_dev.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
There is no lwt test case for BPF_REROUTE yet. Add test cases for both
normal and abnormal situations. The abnormal situation is set up with an
fq qdisc on the reroute target device. Without proper fixes, overflow
this qdisc queue limit (to trigger a drop) would panic the kernel.
Signed-off-by: Yan Zhai <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/62c8ddc1e924269dcf80d2e8af1a1e632cee0b3a.1692326837.git.yan@cloudflare.com
|
|
There is no lwt_xmit test case for BPF_REDIRECT yet. Add test cases for
both normal and abnormal situations. For abnormal test cases, devices
are set down or have its carrier set down. Without proper fixes,
BPF_REDIRECT to either ingress or egress of such device would panic the
kernel.
Signed-off-by: Yan Zhai <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/96bf435243641939d9c9da329fab29cb45f7df22.1692326837.git.yan@cloudflare.com
|
|
Enable CPU v4 instruction tests for arm64. Below are the test results from
BPF test_progs selftests:
# ./test_progs -t ldsx_insn,verifier_sdiv,verifier_movsx,verifier_ldsx,verifier_gotol,verifier_bswap
#115/1 ldsx_insn/map_val and probed_memory:OK
#115/2 ldsx_insn/ctx_member_sign_ext:OK
#115/3 ldsx_insn/ctx_member_narrow_sign_ext:OK
#115 ldsx_insn:OK
#302/1 verifier_bswap/BSWAP, 16:OK
#302/2 verifier_bswap/BSWAP, 16 @unpriv:OK
#302/3 verifier_bswap/BSWAP, 32:OK
#302/4 verifier_bswap/BSWAP, 32 @unpriv:OK
#302/5 verifier_bswap/BSWAP, 64:OK
#302/6 verifier_bswap/BSWAP, 64 @unpriv:OK
#302 verifier_bswap:OK
#316/1 verifier_gotol/gotol, small_imm:OK
#316/2 verifier_gotol/gotol, small_imm @unpriv:OK
#316 verifier_gotol:OK
#324/1 verifier_ldsx/LDSX, S8:OK
#324/2 verifier_ldsx/LDSX, S8 @unpriv:OK
#324/3 verifier_ldsx/LDSX, S16:OK
#324/4 verifier_ldsx/LDSX, S16 @unpriv:OK
#324/5 verifier_ldsx/LDSX, S32:OK
#324/6 verifier_ldsx/LDSX, S32 @unpriv:OK
#324/7 verifier_ldsx/LDSX, S8 range checking, privileged:OK
#324/8 verifier_ldsx/LDSX, S16 range checking:OK
#324/9 verifier_ldsx/LDSX, S16 range checking @unpriv:OK
#324/10 verifier_ldsx/LDSX, S32 range checking:OK
#324/11 verifier_ldsx/LDSX, S32 range checking @unpriv:OK
#324 verifier_ldsx:OK
#335/1 verifier_movsx/MOV32SX, S8:OK
#335/2 verifier_movsx/MOV32SX, S8 @unpriv:OK
#335/3 verifier_movsx/MOV32SX, S16:OK
#335/4 verifier_movsx/MOV32SX, S16 @unpriv:OK
#335/5 verifier_movsx/MOV64SX, S8:OK
#335/6 verifier_movsx/MOV64SX, S8 @unpriv:OK
#335/7 verifier_movsx/MOV64SX, S16:OK
#335/8 verifier_movsx/MOV64SX, S16 @unpriv:OK
#335/9 verifier_movsx/MOV64SX, S32:OK
#335/10 verifier_movsx/MOV64SX, S32 @unpriv:OK
#335/11 verifier_movsx/MOV32SX, S8, range_check:OK
#335/12 verifier_movsx/MOV32SX, S8, range_check @unpriv:OK
#335/13 verifier_movsx/MOV32SX, S16, range_check:OK
#335/14 verifier_movsx/MOV32SX, S16, range_check @unpriv:OK
#335/15 verifier_movsx/MOV32SX, S16, range_check 2:OK
#335/16 verifier_movsx/MOV32SX, S16, range_check 2 @unpriv:OK
#335/17 verifier_movsx/MOV64SX, S8, range_check:OK
#335/18 verifier_movsx/MOV64SX, S8, range_check @unpriv:OK
#335/19 verifier_movsx/MOV64SX, S16, range_check:OK
#335/20 verifier_movsx/MOV64SX, S16, range_check @unpriv:OK
#335/21 verifier_movsx/MOV64SX, S32, range_check:OK
#335/22 verifier_movsx/MOV64SX, S32, range_check @unpriv:OK
#335/23 verifier_movsx/MOV64SX, S16, R10 Sign Extension:OK
#335/24 verifier_movsx/MOV64SX, S16, R10 Sign Extension @unpriv:OK
#335 verifier_movsx:OK
#347/1 verifier_sdiv/SDIV32, non-zero imm divisor, check 1:OK
#347/2 verifier_sdiv/SDIV32, non-zero imm divisor, check 1 @unpriv:OK
#347/3 verifier_sdiv/SDIV32, non-zero imm divisor, check 2:OK
#347/4 verifier_sdiv/SDIV32, non-zero imm divisor, check 2 @unpriv:OK
#347/5 verifier_sdiv/SDIV32, non-zero imm divisor, check 3:OK
#347/6 verifier_sdiv/SDIV32, non-zero imm divisor, check 3 @unpriv:OK
#347/7 verifier_sdiv/SDIV32, non-zero imm divisor, check 4:OK
#347/8 verifier_sdiv/SDIV32, non-zero imm divisor, check 4 @unpriv:OK
#347/9 verifier_sdiv/SDIV32, non-zero imm divisor, check 5:OK
#347/10 verifier_sdiv/SDIV32, non-zero imm divisor, check 5 @unpriv:OK
#347/11 verifier_sdiv/SDIV32, non-zero imm divisor, check 6:OK
#347/12 verifier_sdiv/SDIV32, non-zero imm divisor, check 6 @unpriv:OK
#347/13 verifier_sdiv/SDIV32, non-zero imm divisor, check 7:OK
#347/14 verifier_sdiv/SDIV32, non-zero imm divisor, check 7 @unpriv:OK
#347/15 verifier_sdiv/SDIV32, non-zero imm divisor, check 8:OK
#347/16 verifier_sdiv/SDIV32, non-zero imm divisor, check 8 @unpriv:OK
#347/17 verifier_sdiv/SDIV32, non-zero reg divisor, check 1:OK
#347/18 verifier_sdiv/SDIV32, non-zero reg divisor, check 1 @unpriv:OK
#347/19 verifier_sdiv/SDIV32, non-zero reg divisor, check 2:OK
#347/20 verifier_sdiv/SDIV32, non-zero reg divisor, check 2 @unpriv:OK
#347/21 verifier_sdiv/SDIV32, non-zero reg divisor, check 3:OK
#347/22 verifier_sdiv/SDIV32, non-zero reg divisor, check 3 @unpriv:OK
#347/23 verifier_sdiv/SDIV32, non-zero reg divisor, check 4:OK
#347/24 verifier_sdiv/SDIV32, non-zero reg divisor, check 4 @unpriv:OK
#347/25 verifier_sdiv/SDIV32, non-zero reg divisor, check 5:OK
#347/26 verifier_sdiv/SDIV32, non-zero reg divisor, check 5 @unpriv:OK
#347/27 verifier_sdiv/SDIV32, non-zero reg divisor, check 6:OK
#347/28 verifier_sdiv/SDIV32, non-zero reg divisor, check 6 @unpriv:OK
#347/29 verifier_sdiv/SDIV32, non-zero reg divisor, check 7:OK
#347/30 verifier_sdiv/SDIV32, non-zero reg divisor, check 7 @unpriv:OK
#347/31 verifier_sdiv/SDIV32, non-zero reg divisor, check 8:OK
#347/32 verifier_sdiv/SDIV32, non-zero reg divisor, check 8 @unpriv:OK
#347/33 verifier_sdiv/SDIV64, non-zero imm divisor, check 1:OK
#347/34 verifier_sdiv/SDIV64, non-zero imm divisor, check 1 @unpriv:OK
#347/35 verifier_sdiv/SDIV64, non-zero imm divisor, check 2:OK
#347/36 verifier_sdiv/SDIV64, non-zero imm divisor, check 2 @unpriv:OK
#347/37 verifier_sdiv/SDIV64, non-zero imm divisor, check 3:OK
#347/38 verifier_sdiv/SDIV64, non-zero imm divisor, check 3 @unpriv:OK
#347/39 verifier_sdiv/SDIV64, non-zero imm divisor, check 4:OK
#347/40 verifier_sdiv/SDIV64, non-zero imm divisor, check 4 @unpriv:OK
#347/41 verifier_sdiv/SDIV64, non-zero imm divisor, check 5:OK
#347/42 verifier_sdiv/SDIV64, non-zero imm divisor, check 5 @unpriv:OK
#347/43 verifier_sdiv/SDIV64, non-zero imm divisor, check 6:OK
#347/44 verifier_sdiv/SDIV64, non-zero imm divisor, check 6 @unpriv:OK
#347/45 verifier_sdiv/SDIV64, non-zero reg divisor, check 1:OK
#347/46 verifier_sdiv/SDIV64, non-zero reg divisor, check 1 @unpriv:OK
#347/47 verifier_sdiv/SDIV64, non-zero reg divisor, check 2:OK
#347/48 verifier_sdiv/SDIV64, non-zero reg divisor, check 2 @unpriv:OK
#347/49 verifier_sdiv/SDIV64, non-zero reg divisor, check 3:OK
#347/50 verifier_sdiv/SDIV64, non-zero reg divisor, check 3 @unpriv:OK
#347/51 verifier_sdiv/SDIV64, non-zero reg divisor, check 4:OK
#347/52 verifier_sdiv/SDIV64, non-zero reg divisor, check 4 @unpriv:OK
#347/53 verifier_sdiv/SDIV64, non-zero reg divisor, check 5:OK
#347/54 verifier_sdiv/SDIV64, non-zero reg divisor, check 5 @unpriv:OK
#347/55 verifier_sdiv/SDIV64, non-zero reg divisor, check 6:OK
#347/56 verifier_sdiv/SDIV64, non-zero reg divisor, check 6 @unpriv:OK
#347/57 verifier_sdiv/SMOD32, non-zero imm divisor, check 1:OK
#347/58 verifier_sdiv/SMOD32, non-zero imm divisor, check 1 @unpriv:OK
#347/59 verifier_sdiv/SMOD32, non-zero imm divisor, check 2:OK
#347/60 verifier_sdiv/SMOD32, non-zero imm divisor, check 2 @unpriv:OK
#347/61 verifier_sdiv/SMOD32, non-zero imm divisor, check 3:OK
#347/62 verifier_sdiv/SMOD32, non-zero imm divisor, check 3 @unpriv:OK
#347/63 verifier_sdiv/SMOD32, non-zero imm divisor, check 4:OK
#347/64 verifier_sdiv/SMOD32, non-zero imm divisor, check 4 @unpriv:OK
#347/65 verifier_sdiv/SMOD32, non-zero imm divisor, check 5:OK
#347/66 verifier_sdiv/SMOD32, non-zero imm divisor, check 5 @unpriv:OK
#347/67 verifier_sdiv/SMOD32, non-zero imm divisor, check 6:OK
#347/68 verifier_sdiv/SMOD32, non-zero imm divisor, check 6 @unpriv:OK
#347/69 verifier_sdiv/SMOD32, non-zero reg divisor, check 1:OK
#347/70 verifier_sdiv/SMOD32, non-zero reg divisor, check 1 @unpriv:OK
#347/71 verifier_sdiv/SMOD32, non-zero reg divisor, check 2:OK
#347/72 verifier_sdiv/SMOD32, non-zero reg divisor, check 2 @unpriv:OK
#347/73 verifier_sdiv/SMOD32, non-zero reg divisor, check 3:OK
#347/74 verifier_sdiv/SMOD32, non-zero reg divisor, check 3 @unpriv:OK
#347/75 verifier_sdiv/SMOD32, non-zero reg divisor, check 4:OK
#347/76 verifier_sdiv/SMOD32, non-zero reg divisor, check 4 @unpriv:OK
#347/77 verifier_sdiv/SMOD32, non-zero reg divisor, check 5:OK
#347/78 verifier_sdiv/SMOD32, non-zero reg divisor, check 5 @unpriv:OK
#347/79 verifier_sdiv/SMOD32, non-zero reg divisor, check 6:OK
#347/80 verifier_sdiv/SMOD32, non-zero reg divisor, check 6 @unpriv:OK
#347/81 verifier_sdiv/SMOD64, non-zero imm divisor, check 1:OK
#347/82 verifier_sdiv/SMOD64, non-zero imm divisor, check 1 @unpriv:OK
#347/83 verifier_sdiv/SMOD64, non-zero imm divisor, check 2:OK
#347/84 verifier_sdiv/SMOD64, non-zero imm divisor, check 2 @unpriv:OK
#347/85 verifier_sdiv/SMOD64, non-zero imm divisor, check 3:OK
#347/86 verifier_sdiv/SMOD64, non-zero imm divisor, check 3 @unpriv:OK
#347/87 verifier_sdiv/SMOD64, non-zero imm divisor, check 4:OK
#347/88 verifier_sdiv/SMOD64, non-zero imm divisor, check 4 @unpriv:OK
#347/89 verifier_sdiv/SMOD64, non-zero imm divisor, check 5:OK
#347/90 verifier_sdiv/SMOD64, non-zero imm divisor, check 5 @unpriv:OK
#347/91 verifier_sdiv/SMOD64, non-zero imm divisor, check 6:OK
#347/92 verifier_sdiv/SMOD64, non-zero imm divisor, check 6 @unpriv:OK
#347/93 verifier_sdiv/SMOD64, non-zero imm divisor, check 7:OK
#347/94 verifier_sdiv/SMOD64, non-zero imm divisor, check 7 @unpriv:OK
#347/95 verifier_sdiv/SMOD64, non-zero imm divisor, check 8:OK
#347/96 verifier_sdiv/SMOD64, non-zero imm divisor, check 8 @unpriv:OK
#347/97 verifier_sdiv/SMOD64, non-zero reg divisor, check 1:OK
#347/98 verifier_sdiv/SMOD64, non-zero reg divisor, check 1 @unpriv:OK
#347/99 verifier_sdiv/SMOD64, non-zero reg divisor, check 2:OK
#347/100 verifier_sdiv/SMOD64, non-zero reg divisor, check 2 @unpriv:OK
#347/101 verifier_sdiv/SMOD64, non-zero reg divisor, check 3:OK
#347/102 verifier_sdiv/SMOD64, non-zero reg divisor, check 3 @unpriv:OK
#347/103 verifier_sdiv/SMOD64, non-zero reg divisor, check 4:OK
#347/104 verifier_sdiv/SMOD64, non-zero reg divisor, check 4 @unpriv:OK
#347/105 verifier_sdiv/SMOD64, non-zero reg divisor, check 5:OK
#347/106 verifier_sdiv/SMOD64, non-zero reg divisor, check 5 @unpriv:OK
#347/107 verifier_sdiv/SMOD64, non-zero reg divisor, check 6:OK
#347/108 verifier_sdiv/SMOD64, non-zero reg divisor, check 6 @unpriv:OK
#347/109 verifier_sdiv/SMOD64, non-zero reg divisor, check 7:OK
#347/110 verifier_sdiv/SMOD64, non-zero reg divisor, check 7 @unpriv:OK
#347/111 verifier_sdiv/SMOD64, non-zero reg divisor, check 8:OK
#347/112 verifier_sdiv/SMOD64, non-zero reg divisor, check 8 @unpriv:OK
#347/113 verifier_sdiv/SDIV32, zero divisor:OK
#347/114 verifier_sdiv/SDIV32, zero divisor @unpriv:OK
#347/115 verifier_sdiv/SDIV64, zero divisor:OK
#347/116 verifier_sdiv/SDIV64, zero divisor @unpriv:OK
#347/117 verifier_sdiv/SMOD32, zero divisor:OK
#347/118 verifier_sdiv/SMOD32, zero divisor @unpriv:OK
#347/119 verifier_sdiv/SMOD64, zero divisor:OK
#347/120 verifier_sdiv/SMOD64, zero divisor @unpriv:OK
#347 verifier_sdiv:OK
Summary: 6/166 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Xu Kuohai <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Florent Revest <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: Florent Revest <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Various char * parameters in the common powerpc selftest APIs can be
const.
Signed-off-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Add exec_prot to to mm/.gitignore and sort the result.
Signed-off-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter.
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option is
enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup
source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers"
* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ice: Block switchdev mode when ADQ is active and vice versa
qede: fix firmware halt over suspend and resume
net: do not allow gso_size to be set to GSO_BY_FRAGS
sock: Fix misuse of sk_under_memory_pressure()
sfc: don't fail probe if MAE/TC setup fails
sfc: don't unregister flow_indr if it was never registered
net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
ipv6: fix indentation of a config attribute
mailmap: add entries for Simon Horman
broadcom: b44: Use b44_writephy() return value
net: openvswitch: reject negative ifindex
team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
net: phy: broadcom: stub c45 read/write for 54810
netfilter: nft_dynset: disallow object maps
netfilter: nf_tables: GC transaction race with netns dismantle
netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
...
|
|
Commit 4680b734e729 ("cpupower: Add Georgian translation") added
new language support. This change didn't add "ka" to Makefile
LANGUAGES variable. Add it now.
Reported-by: Temuri Doghonadze <[email protected]>
Reported-by: Zurab Kargareteli <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add a test to ensure that setting both generic and fixed performance
event filters does not affect the consistency of the fixed event filter
behavior in KVM.
Signed-off-by: Jinrong Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add tests to cover that pmu event_filter works as expected when it's
applied to fixed performance counters, even if there is none fixed
counter exists (e.g. Intel guest pmu version=1 or AMD guest).
Signed-off-by: Jinrong Liang <[email protected]>
Reviewed-by: Isaku Yamahata <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add test cases to verify the handling of unsupported input values for the
PMU event filter. The tests cover unsupported "action" values, unsupported
"flags" values, and unsupported "nevents" values. All these cases should
return an error, as they are currently not supported by the filter.
Furthermore, the tests also cover the case where setting non-existent
fixed counters in the fixed bitmap does not fail.
Signed-off-by: Jinrong Liang <[email protected]>
Reviewed-by: Isaku Yamahata <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add custom "__kvm_pmu_event_filter" structure to improve pmu event
filter settings. Simplifies event filter setup by organizing event
filter parameters in a cleaner, more organized way.
Alternatively, selftests could use a struct overlay ala vcpu_set_msr()
to avoid dynamically allocating the array:
struct {
struct kvm_msrs header;
struct kvm_msr_entry entry;
} buffer = {};
memset(&buffer, 0, sizeof(buffer));
buffer.header.nmsrs = 1;
buffer.entry.index = msr_index;
buffer.entry.data = msr_value;
but the extra layer added by the nested structs is counterproductive
to writing efficient, clean code.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Jinrong Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[sean: massage changelog to explain alternative]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
None of the callers consume remove_event(), and it incorrectly implies
that the incoming filter isn't modified. Drop the return.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Jinrong Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add x86 properties for Intel PMU so that tests don't have to manually
retrieve the correct CPUID leaf+register, and so that the resulting code
is self-documenting.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Jinrong Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:
perf_session__delete(ERR_PTR(-1))
Resulting in:
(gdb) run lock contention
Starting program: /root/bin/perf lock contention
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
failed to open perf.data: No such file or directory (try 'perf record' first)
Initializing perf session failed
Program received signal SIGSEGV, Segmentation fault.
0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
2858 if (!session->auxtrace)
(gdb) p session
$1 = (struct perf_session *) 0xffffffffffffffff
(gdb) bt
#0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
#1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
#2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
#3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
#4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
#5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
#6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
#7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
(gdb)
So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.
Fixes: eef4fee5e52071d5 ("perf lock: Dynamically allocate lockhash_table")
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mamatha Inamdar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Ross Zwisler <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Tiezhu Yang <[email protected]>
Cc: Yang Jihong <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:
perf_session__delete(ERR_PTR(-1))
Resulting in:
(gdb) run lock contention
Starting program: /root/bin/perf lock contention
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
failed to open perf.data: No such file or directory (try 'perf record' first)
Initializing perf session failed
Program received signal SIGSEGV, Segmentation fault.
0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
2858 if (!session->auxtrace)
(gdb) p session
$1 = (struct perf_session *) 0xffffffffffffffff
(gdb) bt
#0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
#1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
#2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
#3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
#4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
#5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
#6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
#7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
(gdb)
So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.
The same problem was found in 'perf top' after an audit of all
perf_session__new() failure handling.
Fixes: 6ef81c55a2b6584c ("perf session: Return error code for perf_session__new() function on failure")
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jeremie Galarneau <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Mamatha Inamdar <[email protected]>
Cc: Mukesh Ojha <[email protected]>
Cc: Nageswara R Sastry <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Shawn Landden <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tzvetomir Stoyanov <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
telemetry repo
Apart from some slight naming and grouping differences, the new metrics
are functionally the same as the existing ones. Any missing metrics were
manually appended to the end of the auto generated file.
For the events, the new data includes descriptions that may have product
specific details and new groupings that will be consistent with other
products.
After generating the metrics from the telemetry repo [1], the following
manual steps were performed:
* Change the topdown expressions to compare on CPUID and use
#slots so that the same data can be shared between N2 and V2. Apart
from these modifications, the expressions now match more closely with
the Arm telemetry data which will hopefully make future updates
easier.
* Append some metrics from the old N2/V2 data that aren't present in
the telemetry data. These will possibly be added to the
telemetry-solution repo at a later time:
l3d_cache_mpki, l3d_cache_miss_rate, branch_pki, ipc_rate, spec_ipc,
retired_rate, wasted_rate, branch_immed_spec_rate,
branch_return_spec_rate, branch_indirect_spec_rate
[1]: https://gitlab.arm.com/telemetry-solution/telemetry-solution/-/blob/main/data/pmu/cpu/neoverse/neoverse-n2.json
Signed-off-by: James Clark <[email protected]>
Reviewed-by: John Garry <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Eduard Zingerman <[email protected]>
Cc: Haixin Yu <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jing Zhang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Forrington <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sohom Datta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
N2 r0p3 doesn't require the workaround [1], so gating on (#slots - 5) no
longer works because all N2s have 5 slots. Use the new expression
builtin that allows calling strcmp_cpuid_str() and comparing CPUIDs in
metric formulas.
In this case, the commented formula looks like this:
strcmp_cpuid_str(0x410fd493) # greater than or equal to N2 r0p3
| strcmp_cpuid_str(0x410fd490) ^ 1 # OR NOT any version of N2
[1]: https://gitlab.arm.com/telemetry-solution/telemetry-solution/-/blob/main/data/pmu/cpu/neoverse/neoverse-n2-r0p3.json
Signed-off-by: James Clark <[email protected]>
Reviewed-by: John Garry <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Eduard Zingerman <[email protected]>
Cc: Haixin Yu <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jing Zhang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Forrington <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sohom Datta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This will allow writing formulas that are conditional on a specific
CPU type or CPU version. It calls through to the existing
strcmp_cpuid_str() function in Perf which has a default weak version,
and an arch specific version for x86 and arm64.
The function takes an 'ID' type value, which is a string. But in this
case Arm CPU IDs are hex numbers prefixed with '0x'. metric.py
assumes strings are only used by event names, and that they can't start
with a number ('0'), so an additional change has to be made to the
regex to convert hex numbers back to 'ID' types.
Signed-off-by: James Clark <[email protected]>
Reviewed-by: John Garry <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Eduard Zingerman <[email protected]>
Cc: Haixin Yu <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jing Zhang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Forrington <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sohom Datta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now that variant and revision fields are taken into account the behavior
is slightly more complicated so add a test to ensure that this behaves
as expected.
Reviewed-by: John Garry <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Eduard Zingerman <[email protected]>
Cc: Haixin Yu <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jing Zhang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Forrington <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sohom Datta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently variant and revision fields are masked out of the MIDR so
it's not possible to compare different versions of the same CPU.
In a later commit a workaround will be removed just for N2 r0p3, so
enable comparisons on version.
This has the side effect of changing the MIDR stored in the header of
the perf.data file to no longer have masked version fields. It also
affects the lookups in mapfile.csv, but as that currently only has
zeroed version fields, it has no actual effect. The mapfile.csv
documentation also states to zero the version fields, so unless this
isn't done it will continue to have no effect.
There is an existing weak default strcmp_cpuid_str() function, and an
x86 version. This adds another version for arm64.
Signed-off-by: James Clark <[email protected]>
Reviewed-by: John Garry <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Eduard Zingerman <[email protected]>
Cc: Haixin Yu <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jing Zhang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Forrington <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sohom Datta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
loongarch"
Unifying the asm-generic headers across 32-bit and 64-bit architectures
based on the compiler provided macros was a good idea and appears to work
with all user space, but it caused a regression when building old kernels
on systems that have the new headers installed in /usr/include, as this
combination trips an inconsistency in the kernel's own tools/include
headers that are a mix of userspace and kernel-internal headers.
This affects kernel builds on arm64, riscv64 and loongarch64 systems that
might end up using the "#define __BITS_PER_LONG 32" default from the old
tools headers. Backporting the commit into stable kernels would address
this, but it would still break building kernels without that backport,
and waste time for developers trying to understand the problem.
arm64 build machines are rather common, and on riscv64 this can also
happen in practice, but loongarch64 is probably new enough to not
be used much for building old kernels, so only revert the bits
for arm64 and riscv.
Link: https://lore.kernel.org/all/[email protected]/
Reported-by: Nathan Chancellor <[email protected]>
Fixes: 8386f58f8deda ("asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch")
Acked-by: Catalin Marinas <[email protected]>
Acked-by: Palmer Dabbelt <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-08-16
We've added 17 non-merge commits during the last 6 day(s) which contain
a total of 20 files changed, 1179 insertions(+), 37 deletions(-).
The main changes are:
1) Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
applications, from Geliang Tang.
2) Follow-up/fallout fix from the SO_REUSEPORT + bpf_sk_assign work
to fix a splat on non-fullsock sks in inet[6]_steal_sock,
from Lorenz Bauer.
3) Improvements to struct_ops links to avoid forcing presence of
update/validate callbacks. Also add bpf_struct_ops fields documentation,
from David Vernet.
4) Ensure libbpf sets close-on-exec flag on gzopen, from Marco Vedovati.
5) Several new tcx selftest additions and bpftool link show support for
tcx and xdp links, from Daniel Borkmann.
6) Fix a smatch warning on uninitialized symbol in
bpf_perf_link_fill_kprobe, from Yafang Shao.
7) BPF selftest fixes e.g. misplaced break in kfunc_call test,
from Yipeng Zou.
8) Small cleanup to remove unused declaration bpf_link_new_file,
from Yue Haibing.
9) Small typo fix to bpftool's perf help message, from Daniel T. Lee.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add mptcpify test
selftests/bpf: Fix error checks of mptcp open_and_load
selftests/bpf: Add two mptcp netns helpers
bpf: Add update_socket_protocol hook
bpftool: Implement link show support for xdp
bpftool: Implement link show support for tcx
selftests/bpf: Add selftest for fill_link_info
bpf: Fix uninitialized symbol in bpf_perf_link_fill_kprobe()
net: Fix slab-out-of-bounds in inet[6]_steal_sock
bpf: Document struct bpf_struct_ops fields
bpf: Support default .validate() and .update() behavior for struct_ops links
selftests/bpf: Add various more tcx test cases
selftests/bpf: Clean up fmod_ret in bench_rename test script
selftests/bpf: Fix repeat option when kfunc_call verification fails
libbpf: Set close-on-exec flag on gzopen
bpftool: fix perf help message
bpf: Remove unused declaration bpf_link_new_file()
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
For stack-validation of a frame-pointer build, objtool validates that
every CALL instruction is preceded by a frame-setup. The new SRSO
return thunks violate this with their RSB stuffing trickery.
Extend the __fentry__ exception to also cover the embedded_insn case
used for this. This cures:
vmlinux.o: warning: objtool: srso_untrain_ret+0xd: call without frame pointer save/setup
Fixes: 4ae68b26c3ab ("objtool/x86: Fix SRSO mess")
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
'rcu-tasks.2023.07.24a', 'rcuscale.2023.07.14b', 'refscale.2023.07.14b', 'torture.2023.08.14a' and 'torturescripts.2023.07.20a' into HEAD
doc.2023.07.14b: Documentation updates.
fixes.2023.08.16a: Miscellaneous fixes.
rcu-tasks.2023.07.24a: RCU Tasks updates.
rcuscale.2023.07.14b: RCU (updater) scalability test updates.
refscale.2023.07.14b: Reference (reader) scalability test updates.
torture.2023.08.14a: Other torture-test updates.
torturescripts.2023.07.20a: Other torture-test scripting updates.
|
|
Rename the original retbleed return thunk and untrain_ret to
retbleed_return_thunk() and retbleed_untrain_ret().
No functional changes.
Suggested-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Use the existing configurable return thunk. There is absolute no
justification for having created this __x86_return_thunk alternative.
To clarify, the whole thing looks like:
Zen3/4 does:
srso_alias_untrain_ret:
nop2
lfence
jmp srso_alias_return_thunk
int3
srso_alias_safe_ret: // aliasses srso_alias_untrain_ret just so
add $8, %rsp
ret
int3
srso_alias_return_thunk:
call srso_alias_safe_ret
ud2
While Zen1/2 does:
srso_untrain_ret:
movabs $foo, %rax
lfence
call srso_safe_ret (jmp srso_return_thunk ?)
int3
srso_safe_ret: // embedded in movabs instruction
add $8,%rsp
ret
int3
srso_return_thunk:
call srso_safe_ret
ud2
While retbleed does:
zen_untrain_ret:
test $0xcc, %bl
lfence
jmp zen_return_thunk
int3
zen_return_thunk: // embedded in the test instruction
ret
int3
Where Zen1/2 flush the BTB entry using the instruction decoder trick
(test,movabs) Zen3/4 use BTB aliasing. SRSO adds a return sequence
(srso_safe_ret()) which forces the function return instruction to
speculate into a trap (UD2). This RET will then mispredict and
execution will continue at the return site read from the top of the
stack.
Pick one of three options at boot (evey function can only ever return
once).
[ bp: Fixup commit message uarch details and add them in a comment in
the code too. Add a comment about the srso_select_mitigation()
dependency on retbleed_select_mitigation(). Add moar ifdeffery for
32-bit builds. Add a dummy srso_untrain_ret_alias() definition for
32-bit alternatives needing the symbol. ]
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This testcase is constrived to reproduce a problem that the cpu buffers
become unavailable which is due to 'record_disabled' of array_buffer and
max_buffer being messed up.
Local test result after bugfix:
# ./ftracetest test.d/00basic/snapshot1.tc
=== Ftrace unit tests ===
[1] Snapshot and tracing_cpumask [PASS]
[2] (instance) Snapshot and tracing_cpumask [PASS]
# of passed: 2
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Link: https://lkml.kernel.org/r/[email protected]
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Zheng Yejian <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Implement a new test program mptcpify: if the family is AF_INET or
AF_INET6, the type is SOCK_STREAM, and the protocol ID is 0 or
IPPROTO_TCP, set it to IPPROTO_MPTCP. It will be hooked in
update_socket_protocol().
Extend the MPTCP test base, add a selftest test_mptcpify() for the
mptcpify case. Open and load the mptcpify test prog to mptcpify the
TCP sockets dynamically, then use start_server() and connect_to_fd()
to create a TCP socket, but actually what's created is an MPTCP
socket, which can be verified through 'getsockopt(SOL_PROTOCOL)'
and 'getsockopt(MPTCP_INFO)'.
Acked-by: Yonghong Song <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/364e72f307e7bb38382ec7442c182d76298a9c41.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Return libbpf_get_error(), instead of -EIO, for the error from
mptcp_sock__open_and_load().
Load success means prog_fd and map_fd are always valid. So drop these
unneeded ASSERT_GE checks for them in mptcp run_test().
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/db5fcb93293df9ab173edcbaf8252465b80da6f2.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Add two netns helpers for mptcp tests: create_netns() and
cleanup_netns(). Use them in test_base().
These new helpers will be re-used in the following commits
introducing new tests.
Acked-by: Yonghong Song <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/7506371fb6c417b401cc9d7365fe455754f4ba3f.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <[email protected]>
|