| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
An overflow (OVF packet) is treated as an error because it represents a
loss of trace data, but there is no loss of synchronization, so the packet
state should be INTEL_PT_STATE_IN_SYNC not INTEL_PT_STATE_ERR_RESYNC.
To support that, some additional variables must be reset, and the FUP
packet that may follow OVF is treated as an FUP event.
Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected] # v5.15+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
intel_pt_fup_event() assumes it can overwrite the state type if there has
been an FUP event, but this is an unnecessary and unexpected constraint on
callers.
Fix by touching only the state type flags that are affected by an FUP
event.
Fixes: a472e65fc490a ("perf intel-pt: Add decoder support for ptwrite and power event packets")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected] # v5.15+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When syncing, it may be that branch packet generation is not enabled at
that point, in which case there will not immediately be a control-flow
packet, so some packets before a control flow packet turns up, get
ignored. However, the decoder is in sync as soon as a PSB is found, so
the state should be set accordingly.
Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected] # v5.15+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
usage
Packet generation enable (PGE) refers to whether control flow (COFI)
packets are being produced.
PGE may be false even when branch-tracing is enabled, due to being
out-of-context, or outside a filter address range. Fix some missing PGE
usage.
Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only")
Fixes: 839598176b0554 ("perf intel-pt: Allow decoding with branch tracing disabled")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected] # v5.15+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The size of the cache of register values is arch-dependant
(PERF_REGS_MAX). This has the potential of causing an out-of-bounds
access in the function "perf_reg_value" if the local architecture
contains less registers than the one the perf.data file was recorded on.
Since the maximum number of registers is bound by the bitmask "u64
cache_mask", and the size of the cache when running under x86 systems is
64 already, fix the size to 64 and add a range-check to the function
"perf_reg_value" to prevent out-of-bounds access.
Reported-by: Alexandre Truong <[email protected]>
Reviewed-by: Kajol Jain <[email protected]>
Signed-off-by: German Gomez <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The .fixup has gone the way of the Dodo, that test will always be
false.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This code puts an exception table entry on the PREFETCH instruction to
overwrite it with a JMP.d8 when it triggers an exception. Except of
course, our code is no longer writable, also SMP.
Instead of fixing this broken mess, simply take it out.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Currently, the single test program, debugfs.sh, contains all test cases
for DAMON. When one of the cases fails, finding which case is failed
from the test log is not so easy, and all remaining tests will be
skipped. To improve the situation, this commit splits the single
program into small test programs having their own names.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Brendan Higgins <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
DAMON debugfs interface users were able to trigger warning by writing
some files with arbitrarily large 'count' parameter. The issue is fixed
with commit db7a347b26fe ("mm/damon/dbgfs: use '__GFP_NOWARN' for
user-specified size buffer allocation"). This commit adds a test case
for the issue in DAMON selftests to avoid future regressions.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Brendan Higgins <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
A patch titled "mm/damon/schemes: add the validity judgment of
thresholds"[1] makes DAMON debugfs interface to validate DAMON scheme
inputs. This commit adds a test case for the validation logic in DAMON
selftests.
[1] https://lore.kernel.org/linux-mm/d78360e52158d786fcbf20bc62c96785742e76d3.1637239568.git.xhao@linux.alibaba.com/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Brendan Higgins <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
DAMON debugfs didn't check empty targets when starting monitoring, and
the issue is fixed with commit b5ca3e83ddb0 ("mm/damon/dbgfs: add
adaptive_targets list check before enable monitor_on"). To avoid future
regression, this commit adds a test case for that in DAMON selftests.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Brendan Higgins <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Testing the DAMON debugfs files while DAMON is running makes no sense,
as any write to the debugfs files will fail. This commit makes the test
be skipped in this case.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Brendan Higgins <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from vm tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <[email protected]>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from timens tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <[email protected]>
|
|
ARRAY_SIZE is defined in several selftests. Remove definition from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from adi-test and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <[email protected]>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from seccomp_benchmark and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <[email protected]>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from rseq tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <[email protected]>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from net tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <[email protected]>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from common.h and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <[email protected]>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from ir_loopback.c and pickup the one defined
in kselftest.h.
Signed-off-by: Shuah Khan <[email protected]>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from close_range_test.c and pickup the one defined
in kselftest.h.
Signed-off-by: Shuah Khan <[email protected]>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from cgroup_util.h and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <[email protected]>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from vec-syscfg.c and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <[email protected]>
|
|
tools/include/linux/kernel.h and kselftest_harness.h are missing
ifndef guard around ARRAY_SIZE define. Fix them to avoid duplicate
define errors during compile when another file defines it. This
problem was found when compiling selftests that include a header
with ARRAY_SIZE define.
ARRAY_SIZE is defined in several selftests. There are about 25+
duplicate defines in various selftests source and header files.
Add ARRAY_SIZE to kselftest.h in preparation for removing duplicate
ARRAY_SIZE defines from individual test files.
Signed-off-by: Shuah Khan <[email protected]>
|
|
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When building selftests/cgroup: with clang the following error are seen:
clang -Wall -pthread test_memcontrol.c cgroup_util.c ../clone3/clone3_selftests.h -o .../builds/current/kselftest/cgroup/test_memcontrol
clang: error: cannot specify -o when generating multiple output files
make[3]: *** [../lib.mk:146: .../builds/current/kselftest/cgroup/test_memcontrol] Error 1
Rework to add the header files to LOCAL_HDRS before including ../lib.mk,
since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in
file lib.mk.
Suggested-by: Arnd Bergmann <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The coccinelle report
./tools/testing/selftests/move_mount_set_group/move_mount_set_group_test.c:225:18-23:
WARNING: conversion to bool not needed here
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Yang Guang <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The coccinelle report
./tools/testing/selftests/mount/unprivileged-remount-test.c:285:54-59:
WARNING: conversion to bool not needed here
./tools/testing/selftests/mount/unprivileged-remount-test.c:207:54-59:
WARNING: conversion to bool not needed here
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Yang Guang <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Test can fail either immediately when ASSERT() failed or at the
end if one or more EXPECT() was not met. The exact return code
is decided based on the number of successful ASSERT()s.
If test has no ASSERT()s, however, the return code will be 0,
as if the test did not fail. Start counting ASSERT()s from 1.
Fixes: 369130b63178 ("selftests: Enhance kselftest_harness.h to print which assert failed")
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Commit 32f6e5da83c7 ("selftests/ftrace: Add kprobe profile testcase")
added a new kprobes testcase, but has a description which does not
describe what the test case is doing and is duplicating the description
of another test case.
Therefore change the test case description, so it is unique and then
allows easily to tell which test case actually passed or failed.
Reported-by: Alexander Egorenkov <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Building selftests/clone3 with clang warns about enumeration not handled
in switch case:
clone3.c:54:10: warning: enumeration value 'CLONE3_ARGS_NO_TEST' not handled in switch [-Wswitch]
switch (test_mode) {
^
Add the missing switch case with a comment.
Fixes: 17a810699c18 ("selftests: add tests for clone3()")
Signed-off-by: Anders Roxell <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Eliminate the following coccinelle check warning:
tools/testing/selftests/timers/inconsistency-check.c:75:2-3
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Zhang Mingyu <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Eliminate the following coccinelle check warning:
tools/testing/selftests/timers/alarmtimer-suspend.c:82:2-3
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Zhang Mingyu <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Fix error: "failed to pin map: Bad file descriptor, path:
/sys/fs/bpf/_rodata_str1_1."
In the old kernel, the global data map will not be created, see [0]. So
we should skip the pinning of the global data map to avoid
bpf_object__pin_maps returning error. Therefore, when the map is not
created, we mark “map->skipped" as true and then check during relocation
and during pinning.
Fixes: 16e0c35c6f7a ("libbpf: Load global data maps lazily on legacy kernels")
Signed-off-by: Shuyi Cheng <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
|
|
The btf__dedup_deprecated name was misspelled in the definition of the
compat symbol for btf__dedup. This leads it to be missing from the
shared library.
This fixes it.
Fixes: 957d350a8b94 ("libbpf: Turn btf_dedup_opts into OPTS-based struct")
Signed-off-by: Vincent Minet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Switch all the uses of to-be-deprecated bpf_object__load_xattr() into
a simple bpf_object__load() calls with optional log_level passed through
open_opts.kernel_log_level, if -d option is specified.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Switch from bpf_object__load_xattr() to bpf_object__load() and
kernel_log_level in bpf_object_open_opts.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a selftest that validates that per-program and per-object log_buf
overrides work as expected. Also test same logic for low-level
bpf_prog_load() and bpf_btf_load() APIs.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Switch all selftests uses of to-be-deprecated bpf_load_btf() with
equivalent bpf_btf_load() calls.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Deprecate non-extensible bpf_object__load_xattr() in v0.8 ([0]).
With log_level control through bpf_object_open_opts or
bpf_program__set_log_level(), we are finally at the point where
bpf_object__load_xattr() doesn't provide any functionality that can't be
accessed through other (better) ways. The other feature,
target_btf_path, is also controllable through bpf_object_open_opts.
[0] Closes: https://github.com/libbpf/libbpf/issues/289
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Allow to set user-provided log buffer on a per-program basis ([0]). This
gives great deal of flexibility in terms of which programs are loaded
with logging enabled and where corresponding logs go.
Log buffer set with bpf_program__set_log_buf() overrides kernel_log_buf
and kernel_log_size settings set at bpf_object open time through
bpf_object_open_opts, if any.
Adjust bpf_object_load_prog_instance() logic to not perform own log buf
allocation and load retry if custom log buffer is provided by the user.
[0] Closes: https://github.com/libbpf/libbpf/issues/418
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Instead of rewriting error code returned by the kernel of prog load with
libbpf-sepcific variants pass through the original error.
There is now also no need to have a backup generic -LIBBPF_ERRNO__LOAD
fallback error as bpf_prog_load() guarantees that errno will be properly
set no matter what.
Also drop a completely outdated and pretty useless BPF_PROG_TYPE_KPROBE
guess logic. It's not necessary and neither it's helpful in modern BPF
applications.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add missing "prog '%s': " prefixes in few places and use consistently
markers for beginning and end of program load logs. Here's an example of
log output:
libbpf: prog 'handler': BPF program load failed: Permission denied
libbpf: -- BEGIN PROG LOAD LOG ---
arg#0 reference type('UNKNOWN ') size cannot be determined: -22
; out1 = in1;
0: (18) r1 = 0xffffc9000cdcc000
2: (61) r1 = *(u32 *)(r1 +0)
...
81: (63) *(u32 *)(r4 +0) = r5
R1_w=map_value(id=0,off=16,ks=4,vs=20,imm=0) R4=map_value(id=0,off=400,ks=4,vs=16,imm=0)
invalid access to map value, value_size=16 off=400 size=4
R4 min value is outside of the allowed memory range
processed 63 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
-- END PROG LOAD LOG --
libbpf: failed to load program 'handler'
libbpf: failed to load object 'test_skeleton'
The entire verifier log, including BEGIN and END markers are now always
youtput during a single print callback call. This should make it much
easier to post-process or parse it, if necessary. It's not an explicit
API guarantee, but it can be reasonably expected to stay like that.
Also __bpf_object__open is renamed to bpf_object_open() as it's always
an adventure to find the exact function that implements bpf_object's
open phase, so drop the double underscored and use internal libbpf
naming convention.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Allow users to provide their own custom log_buf, log_size, and log_level
at bpf_object level through bpf_object_open_opts. This log_buf will be
used during BTF loading. Subsequent patch will use same log_buf during
BPF program loading, unless overriden at per-bpf_program level.
When such custom log_buf is provided, libbpf won't be attempting
retrying loading of BTF to try to provide its own log buffer to capture
kernel's error log output. User is responsible to provide big enough
buffer, otherwise they run a risk of getting -ENOSPC error from the
bpf() syscall.
See also comments in bpf_object_open_opts regarding log_level and
log_buf interactions.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add libbpf-internal btf_load_into_kernel() that allows to pass
preallocated log_buf and custom log_level to be passed into kernel
during BPF_BTF_LOAD call. When custom log_buf is provided,
btf_load_into_kernel() won't attempt an retry with automatically
allocated internal temporary buffer to capture BTF validation log.
It's important to note the relation between log_buf and log_level, which
slightly deviates from stricter kernel logic. From kernel's POV, if
log_buf is specified, log_level has to be > 0, and vice versa. While
kernel has good reasons to request such "sanity, this, in practice, is
a bit unconvenient and restrictive for libbpf's high-level bpf_object APIs.
So libbpf will allow to set non-NULL log_buf and log_level == 0. This is
fine and means to attempt to load BTF without logging requested, but if
it failes, retry the load with custom log_buf and log_level 1. Similar
logic will be implemented for program loading. In practice this means
that users can provide custom log buffer just in case error happens, but
not really request slower verbose logging all the time. This is also
consistent with libbpf behavior when custom log_buf is not set: libbpf
first tries to load everything with log_level=0, and only if error
happens allocates internal log buffer and retries with log_level=1.
Also, while at it, make BTF validation log more obvious and follow the log
pattern libbpf is using for dumping BPF verifier log during
BPF_PROG_LOAD. BTF loading resulting in an error will look like this:
libbpf: BTF loading error: -22
libbpf: -- BEGIN BTF LOAD LOG ---
magic: 0xeb9f
version: 1
flags: 0x0
hdr_len: 24
type_off: 0
type_len: 1040
str_off: 1040
str_len: 2063598257
btf_total_size: 1753
Total section length too long
-- END BTF LOAD LOG --
libbpf: Error loading .BTF into kernel: -22. BTF is optional, ignoring.
This makes it much easier to find relevant parts in libbpf log output.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Similar to previous bpf_prog_load() and bpf_map_create() APIs, add
bpf_btf_load() API which is taking optional OPTS struct. Schedule
bpf_load_btf() for deprecation in v0.8 ([0]).
This makes naming consistent with BPF_BTF_LOAD command, sets up an API
for extensibility in the future, moves options parameters (log-related
fields) into optional options, and also allows to pass log_level
directly.
It also removes log buffer auto-allocation logic from low-level API
(consistent with bpf_prog_load() behavior), but preserves a special
treatment of log_level == 0 with non-NULL log_buf, which matches
low-level bpf_prog_load() and high-level libbpf APIs for BTF and program
loading behaviors.
[0] Closes: https://github.com/libbpf/libbpf/issues/419
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
To unify libbpf APIs behavior w.r.t. log_buf and log_level, fix
bpf_prog_load() to follow the same logic as bpf_btf_load() and
high-level bpf_object__load() API will follow in the subsequent patches:
- if log_level is 0 and non-NULL log_buf is provided by a user, attempt
load operation initially with no log_buf and log_level set;
- if successful, we are done, return new FD;
- on error, retry the load operation with log_level bumped to 1 and
log_buf set; this way verbose logging will be requested only when we
are sure that there is a failure, but will be fast in the
common/expected success case.
Of course, user can still specify log_level > 0 from the very beginning
to force log collection.
Suggested-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Create the output directory for the ACPI tools during build if it has
not been present before and prevent the compilation from failing in
that case (Chen Yu)"
* tag 'acpi-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: tools: Fix compilation when output directory is not present
|
|
Pull kvm fixes from Paolo Bonzini:
"More x86 fixes:
- Logic bugs in CR0 writes and Hyper-V hypercalls
- Don't use Enlightened MSR Bitmap for L3
- Remove user-triggerable WARN
Plus a few selftest fixes and a regression test for the
user-triggerable WARN"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: KVM: Add test to verify KVM doesn't explode on "bad" I/O
KVM: x86: Don't WARN if userspace mucks with RCX during string I/O exit
KVM: X86: Raise #GP when clearing CR0_PG in 64 bit mode
selftests: KVM: avoid failures due to reserved HyperTransport region
KVM: x86: Ignore sparse banks size for an "all CPUs", non-sparse IPI req
KVM: x86: Wait for IPIs to be delivered when handling Hyper-V TLB flush hypercall
KVM: x86: selftests: svm_int_ctl_test: fix intercept calculation
KVM: nVMX: Don't use Enlightened MSR Bitmap for L3
|
|
'sys/ioctl.h' included in 'mptcp_inq.c' is duplicated.
Reported-by: ZealRobot <[email protected]>
Signed-off-by: Ye Guojin <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|