| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
swap test for "ip" with "conntrack", former is already accounted for
via setup_ns helper. Also switch to bash.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
While at it, address warnings generated by shellcheck and fix following
minor issues:
- some distros place netem in 'extra' modules package, so add a skip check for netem-attach
failure.
- tc prints a warning for the 100mbit class:
"Warning: sch_htb: quantum of class 10001 is big. Consider r2q change."
Silence this by increasing the divisor.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Replace nc with socat. Too many different implementations of nc
are around with incompatible options ("nc: cannot use -p and -l").
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Only relevant change is that netns names have random suffix names,
i.e. its safe to run this in parallel with other tests.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Also, fix two issues reported by Pablo Neira:
1. Must modprobe br_netfilter in case its not loaded,
else sysctl cannot be set.
2. ping for netns4 fails if rp_filter is enabled in bridge netns,
so set all and default to 0.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Doing so gets us dynamically generated netns names.
Also:
* do not assume rp_filter is disabled, if its on script failed
* reduce timeout (-W) for "expected to fail" ping commands
* don't print PASS line for basic sanity ping
* shellcheck cleanups
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
.. so this can start re-using existing lib.sh infra in next patches.
Several of these scripts will not work, e.g. because they assume
rp_filter is disabled, or reliance on a particular version/flavor
of "netcat" tool.
Add config settings for them.
nft_trans_stress.sh script is removed, it also exists in the nftables
userspace selftests. I do not see a reason to keep two versions in
different repositories/projects.
The settings file is removed for now:
It was used to increase the timeout to avoid slow scripts from getting
zapped by the 45s timeout, but some of the slow scripts can be sped up.
Re-add it later for scripts that cannot be sped up easily.
Update MAINTAINERS to reflect that future updates to netfilter
scripts should go through netfilter-devel@.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Name benchmarks with _ret at the end to avoid creating a new set of
benchmarks.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
bpf_program__attach_uprobe_opts will search LD_LIBRARY_PATH and so
specifying `/lib64` is unnecessary and causes failures for libc.so.6
paths like `/lib/x86_64-linux-gnu/libc.so.6`.
Fixes: 7b47623b8cae8149 ("perf bench uprobe trace_printk: Add entry attaching an BPF program that does a trace_printk")
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add shell check to scripts generating perf trace lookup tables. Fix
quoting issue in arch_errno_names.sh.
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add shellcheck to generate-cmdlist.sh to avoid basic shell script
mistakes.
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add shellcheck for:
tools/perf/arch/x86/tests/gen-insn-x86-dat.sh
tools/perf/arch/x86/entry/syscalls/syscalltbl.sh
Address a minor quoting issue.
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Address shell check errors/warnings in perf-archive.sh and
perf-completion.sh.
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Events like for sapphirerapids have '\r' in the uncore descriptions. The
non-escaped versions of this fail JSON validation the the 'perf list'
test.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We have two printk tests reading trace_pipe in non blocking way,
with the very same code. Moving that in new read_trace_pipe_iter
function.
Current read_trace_pipe is used from samples/bpf and needs to
do blocking read and printf of the trace_pipe data, using new
read_trace_pipe_iter to implement that.
Both printk tests do early checks for the number of found messages
and can bail earlier, but I did not find any speed difference w/o
that condition, so I did not complicate the change more for that.
Some of the samples/bpf programs use read_trace_pipe function,
so I kept that interface untouched. I did not see any issues with
affected samples/bpf programs other than there's slight change in
read_trace_pipe output. The current code uses puts that adds new
line after the printed string, so we would occasionally see extra
new line. With this patch we read output per lines, so there's no
need to use puts and we can use just printf instead without extra
new line.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
s/at at/at a/
Signed-off-by: Thorsten Blum <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Switch loops within dsos.c, add a version that isn't locked. Switch
some unlocked loops to hold the read lock.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Chengen Du <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Markus Elfring <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: zhaimingbing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move dso and dso_id functions to dso.c to match the struct declarations.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Chengen Du <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Markus Elfring <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: zhaimingbing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To better abstract the dsos internals, introduce dsos__for_each_dso that
does a callback on each dso.
This also means the read lock can be correctly held.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Chengen Du <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Markus Elfring <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: zhaimingbing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move more functionality into dsos.c generally from machine.c, renaming
functions to match their new usage.
The find function is made to always "get" before returning a dso.
Reduce the scope of locks in vdso to match the locking paradigm.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Chengen Du <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Markus Elfring <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: zhaimingbing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move functions from machine and build-id to dsos. Pass 'struct dsos'
rather than internal state.
Rename some functions to better represent which data structure they
operate on.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Chengen Du <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Li Dong <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Markus Elfring <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: zhaimingbing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
evlist__config() might mess up the debug output consumed by test
"Test per-thread recording" in "Miscellaneous Intel PT testing".
Move it out from between the debug prints:
"perf record opening and mmapping events" and
"perf record done opening and mmapping events"
Fixes: da4062021e0e6da5 ("perf tools: Add debug messages and comments for testing")
Closes: https://lore.kernel.org/linux-perf-users/ZhVfc5jYLarnGzKa@x1/
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In some data file, I see the following messages repeated. It seems it
doesn't have DSOs in the system and the dso->binary_type is set to
DSO_BINARY_TYPE__NOT_FOUND. Let's skip them to avoid the followings.
No output from objdump --start-address=0x0000000000000000 --stop-address=0x00000000000000d4 -d --no-show-raw-insn -C "$1"
Error running objdump --start-address=0x0000000000000000 --stop-address=0x0000000000000631 -d --no-show-raw-insn -C "$1"
...
Closes: https://lore.kernel.org/linux-perf-users/[email protected]/
Reported-by: Konstantin Kharlamov <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Konstantin Kharlamov <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The data type profiling alone doesn't need the sample histogram for
functions. It only needs the histogram for the types.
Let's remove the condition in the report_callback to check if data type
profiling is selected and make sure the annotation has the 'struct
annotated_source' instantiated before calling symbol__disassemble().
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When the hist entry has the type info, it should be able to display the
annotation browser for the type like in `perf annotate --data-type`.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Like in stdio, it should print all events in a group together.
Committer notes:
Collect it:
root@number:~# perf record -a -e '{cpu_core/mem-loads,ldlat=30/P,cpu_core/mem-stores/P}'
^C[ perf record: Woken up 8 times to write data ]
[ perf record: Captured and wrote 4.980 MB perf.data (55825 samples) ]
root@number:~#
Then do it in stdio:
root@number:~# perf annotate --stdio --data-type
Annotate type: 'union ' in /usr/lib64/libc.so.6 (1131 samples):
event[0] = cpu_core/mem-loads,ldlat=30/P
event[1] = cpu_core/mem-stores/P
============================================================================
Percent offset size field
100.00 100.00 0 40 union {
100.00 100.00 0 40 struct __pthread_mutex_s __data {
48.61 23.46 0 4 int __lock;
0.00 0.48 4 4 unsigned int __count;
6.38 41.32 8 4 int __owner;
8.74 34.02 12 4 unsigned int __nusers;
35.66 0.26 16 4 int __kind;
0.61 0.45 20 2 short int __spins;
0.00 0.00 22 2 short int __elision;
0.00 0.00 24 16 __pthread_list_t __list {
0.00 0.00 24 8 struct __pthread_internal_list* __prev;
0.00 0.00 32 8 struct __pthread_internal_list* __next;
};
};
0.00 0.00 0 0 char* __size;
48.61 23.94 0 8 long int __align;
};
Now with TUI before this patch:
root@number:~# perf annotate --tui --data-type
Annotate type: 'union ' (790 samples)
Percent Offset Size Field
100.00 0 40 union {
100.00 0 40 struct __pthread_mutex_s __data {
48.61 0 4 int __lock;
0.00 4 4 unsigned int __count;
6.38 8 4 int __owner;
8.74 12 4 unsigned int __nusers;
35.66 16 4 int __kind;
0.61 20 2 short int __spins;
0.00 22 2 short int __elision;
0.00 24 16 __pthread_list_t __list {
0.00 24 8 struct __pthread_internal_list* __prev;
0.00 32 8 struct __pthread_internal_list* __next;
0.00 0 0 char* __size;
48.61 0 8 long int __align;
};
And now after this patch:
Annotate type: 'union ' (790 samples)
Percent Offset Size Field
100.00 100.00 0 40 union {
100.00 100.00 0 40 struct __pthread_mutex_s __data {
48.61 23.46 0 4 int __lock;
0.00 0.48 4 4 unsigned int __count;
6.38 41.32 8 4 int __owner;
8.74 34.02 12 4 unsigned int __nusers;
35.66 0.26 16 4 int __kind;
0.61 0.45 20 2 short int __spins;
0.00 0.00 22 2 short int __elision;
0.00 0.00 24 16 __pthread_list_t __list {
0.00 0.00 24 8 struct __pthread_internal_list* __prev;
0.00 0.00 32 8 struct __pthread_internal_list* __next;
};
};
0.00 0.00 0 0 char* __size;
48.61 23.94 0 8 long int __align;
};
On a followup patch the --tui output should have this that is present in
--stdio:
And the --stdio has all the missing info in TUI:
Annotate type: 'union ' in /usr/lib64/libc.so.6 (1131 samples):
event[0] = cpu_core/mem-loads,ldlat=30/P
event[1] = cpu_core/mem-stores/P
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Support data type profiling output on TUI.
Testing from Arnaldo:
First make sure that the debug information for your workload binaries
in embedded in them by building it with '-g' or install the debuginfo
packages, since our workload is 'find':
root@number:~# type find
find is hashed (/usr/bin/find)
root@number:~# rpm -qf /usr/bin/find
findutils-4.9.0-5.fc39.x86_64
root@number:~# dnf debuginfo-install findutils
<SNIP>
root@number:~#
Then collect some data:
root@number:~# echo 1 > /proc/sys/vm/drop_caches
root@number:~# perf mem record find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.331 MB perf.data (3982 samples) ]
root@number:~#
Finally do data-type annotation with the following command, that will
default, as 'perf report' to the --tui mode, with lines colored to
highlight the hotspots, etc.
root@number:~# perf annotate --data-type
Annotate type: 'struct predicate' (58 samples)
Percent Offset Size Field
100.00 0 312 struct predicate {
0.00 0 8 PRED_FUNC pred_func;
0.00 8 8 char* p_name;
0.00 16 4 enum predicate_type p_type;
0.00 20 4 enum predicate_precedence p_prec;
0.00 24 1 _Bool side_effects;
0.00 25 1 _Bool no_default_print;
0.00 26 1 _Bool need_stat;
0.00 27 1 _Bool need_type;
0.00 28 1 _Bool need_inum;
0.00 32 4 enum EvaluationCost p_cost;
0.00 36 4 float est_success_rate;
0.00 40 1 _Bool literal_control_chars;
0.00 41 1 _Bool artificial;
0.00 48 8 char* arg_text;
<SNIP>
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
And move the related code into util/annotate-data.c file.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Like 'perf report', it can take a while to process samples.
Show a progress window to inform users how that it is not stuck.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It's a pseudo data type and has no field.
Fixes: b3c95109c131fcc9 ("perf annotate-data: Add stack canary type")
Closes: https://lore.kernel.org/lkml/Zhb6jJneP36Z-or0@x1
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This check can be done with uname which is more portable. At the same
time re-arrange it into a standard if statement so that it's more
readable.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: James Clark <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Spoorthy S <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In a debug build there is validation that mmap lists are sorted when
taking a lock. In machine__update_kernel_mmap() the start and end
addresses are updated resulting in an unsorted list before the map is
removed from the list. When the map is removed, the lock is taken which
triggers the validation and the failure:
$ perf test "object code reading"
--- start ---
perf: util/maps.c:88: check_invariants: Assertion `map__start(prev) <= map__start(map)' failed.
Aborted
Fix it by updating the addresses after removal, but before insertion.
The bug depends on the ordering and type of debug info on the system and
doesn't reproduce everywhere.
Fixes: 659ad3492b913c90 ("perf maps: Switch from rbtree to lazily sorted array for addresses")
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: James Clark <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Spoorthy S <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
PERF_PMU_CAP_EXTENDED_HW_TYPE results in multiple events being opened on
heterogeneous systems. Currently this test only sets its required
attributes on the first event. Not disabling enable_on_exec on the other
events causes the test to fail because the forked objdump processes are
sampled. No tracking event is opened so Perf only knows about its own
mappings causing the objdump samples to give the following error:
$ perf test -vvv "object code reading"
Reading object code for memory address: 0xffff9aaa55ec
thread__find_map failed
---- end(-1) ----
24: Object code reading : FAILED!
Fixes: 251aa040244a3b17 ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: James Clark <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Spoorthy S <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To prevent anyone from seeing a test failure appear as a regression and
thinking that it was caused by their code change, insert some noise into
the loop which makes it immune to sampling bias issues (errata 1694299).
The "test data symbol" test can fail with any unrelated change that
shifts the loop into an unfortunate position in the Perf binary which is
almost impossible to debug as the root cause of the test failure.
Ultimately it's caused by the referenced errata.
Fixes: 60abedb8aa902b06 ("perf test: Introduce script for data symbol testing")
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: James Clark <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Spoorthy S <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Rather than place metrics without a metric group in "No_group" place
them in a a metric group that is their name. Still allow such metrics
to be selected if "No_group" is passed, this change just impacts perf
list.
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now symbol__annotate() is reentrant and it doesn't need to remove
non-instruction lines. Let's get rid of symbol__ensure_annotate() and
call symbol__annotate() directly. Also we can use it to get the arch
pointer instead of calling evsel__get_arch() directly.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For data type profiling, it removed non-instruction lines from the list
of annotation lines. It was to simplify the implementation dealing with
instructions like to calculate the PC-relative address and to search the
shortest path to the target instruction or basic block.
But it means that it removes all the comments and debug information in
the annotate output like source file name and line numbers. To support
both code annotation and data type annotation, it'd be better to keep
the non-instruction lines as well.
So this change is to skip those lines during the data type profiling
and to display them in the normal perf annotate output.
No function changes intended (other than having more lines).
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The recent change in the global variable handling added a bug to miss
setting the return value even if it found a data type. Also add the
type name in the debug message.
Fixes: 1ebb5e17ef21b492 ("perf annotate-data: Add get_global_var_type()")
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As Mark explains ksft_min_kernel_version() can't be compiled with nolibc,
it doesn't implement uname().
Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Reported-by: Mark Brown <[email protected]>
Signed-off-by: Oleg Nesterov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Closes: https://lore.kernel.org/all/[email protected]/
|
|
Building with clang results in the following warning:
posix_timers.c:69:6: warning: absolute value function 'abs' given an
argument of type 'long long' but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
^
So switch to using llabs() instead.
Fixes: 0bc4b0cf1570 ("selftests: add basic posix timers selftests")
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
__noreturn
After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement
check_timer_distribution()"), clang warns:
tools/testing/selftests/timers/../kselftest.h:398:6: warning: variable 'major' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2)
| ^~~~~~~~~~~~
tools/testing/selftests/timers/../kselftest.h:401:9: note: uninitialized use occurs here
401 | return major > min_major || (major == min_major && minor >= min_minor);
| ^~~~~
tools/testing/selftests/timers/../kselftest.h:398:6: note: remove the '||' if its condition is always false
398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2)
| ^~~~~~~~~~~~~~~
tools/testing/selftests/timers/../kselftest.h:395:20: note: initialize the variable 'major' to silence this warning
395 | unsigned int major, minor;
| ^
| = 0
This is a false positive because if uname() fails, ksft_exit_fail_msg()
will be called, which unconditionally calls exit(), a noreturn function.
However, clang does not know that ksft_exit_fail_msg() will call exit() at
the point in the pipeline that the warning is emitted because inlining has
not occurred, so it assumes control flow will resume normally after
ksft_exit_fail_msg() is called.
Make it clear to clang that all of the functions that call exit()
unconditionally in kselftest.h are noreturn transitively by marking them
explicitly with '__attribute__((__noreturn__))', which clears up the
warning above and any future warnings that may appear for the same reason.
Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Reported-by: John Stultz <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/20240411-mark-kselftest-exit-funcs-noreturn-v1-1-b027c948f586@kernel.org
Closes: https://lore.kernel.org/all/[email protected]/
|
|
After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement
check_timer_distribution()") the following warning occurs when building
with an older gcc:
posix_timers.c:250:2: warning: format not a string literal and no format arguments [-Wformat-security]
250 | ksft_print_msg(errmsg);
| ^~~~~~~~~~~~~~
Fix this up by changing it to ksft_print_msg("%s", errmsg)
Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Justin Stitt <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
There's a new conflict between this commit pending in x86/cpu:
63edbaa48a57 x86/cpu/topology: Add support for the AMD 0x80000026 leaf
And these fixes in x86/urgent:
c064b536a8f9 x86/cpu/amd: Make the NODEID_MSR union actually work
1b3108f6898e x86/cpu/amd: Make the CPUID 0x80000008 parser correct
Resolve them.
Conflicts:
arch/x86/kernel/cpu/topology_amd.c
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The test sets a hardware breakpoint and uses a BPF program to suppress the
side effects of a perf event sample, including I/O availability signals,
SIGTRAPs, and decrementing the event counter limit, if the IP matches the
expected value. Then the function with the breakpoint is executed multiple
times to test that all effects behave as expected.
Signed-off-by: Kyle Huey <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Acked-by: Song Liu <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The "close handle without consuming VPD" testcase has inconsistent
results because it fails to initialize the location code object it
passes to ioctl() to create a VPD handle. Initialize the location code
to the empty string as intended.
Signed-off-by: Nathan Lynch <[email protected]>
Fixes: 9118c5d32bdd ("powerpc/selftests: Add test for papr-vpd")
Reported-by: Geetika Moolchandani <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Fix index of Clear Event Record handles in cxl_clear_event_record()
- Fix use before init of map->reg_type in cxl_decode_regblock()
- Fix initialization of mbox_cmd.size_out in cxl_mem_get_records_log()
- Fix CXL path access_coordinate computation:
- Remove unneded check of iter in loop
- Fix of retrieving of access_coordinate in PCI topology walk
- Fix of incorrect region access_coordinate data calculation
- Consolidate of access_coordinates attached to downstream port
context
- Add check to validate access_coordinate validity to prevent
incorrect data being exposed via sysfs
* tag 'cxl-fixes-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Add checks to access_coordinate calculation to fail missing data
cxl: Consolidate dport access_coordinate ->hb_coord and ->sw_coord into ->coord
cxl: Fix incorrect region perf data calculation
cxl: Fix retrieving of access_coordinates in PCIe path
cxl: Remove checking of iter in cxl_endpoint_get_perf_coordinates()
cxl/core: Fix initialization of mbox_cmd.size_out in get event
cxl/core/regs: Fix usage of map->reg_type in cxl_decode_regblock() before assigned
cxl/mem: Fix for the index of Clear Event Record Handle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Some cosmetic changes (Erni Sri Satya Vennela, Li Zhijian)
- Introduce hv_numa_node_to_pxm_info() (Nuno Das Neves)
- Fix KVP daemon to handle IPv4 and IPv6 combination for keyfile format
(Shradha Gupta)
- Avoid freeing decrypted memory in a confidential VM (Rick Edgecombe
and Michael Kelley)
* tag 'hyperv-fixes-signed-20240411' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted
uio_hv_generic: Don't free decrypted memory
hv_netvsc: Don't free decrypted memory
Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl
Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails
hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for keyfile format
hv: vmbus: Convert sprintf() family to sysfs_emit() family
mshyperv: Introduce hv_numa_node_to_pxm_info()
x86/hyperv: Cosmetic changes for hv_apic.c
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/unix/garbage.c
47d8ac011fe1 ("af_unix: Fix garbage collector racing against connect()")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
faa12ca24558 ("bnxt_en: Reset PTP tx_avail after possible firmware reset")
b3d0083caf9a ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
7ac10c7d728d ("bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init()")
194fad5b2781 ("bnxt_en: Refactor bnxt_rdma_aux_device_init/uninit functions")
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
958f56e48385 ("net/mlx5e: Un-expose functions in en.h")
49e6c9387051 ("net/mlx5e: RSS, Block XOR hash with over 128 channels")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Extend vmx_dirty_log_test to include accesses made by L2 when EPT is
disabled.
This commit adds explicit coverage of a bug caught by syzkaller, where
the TDP MMU would clear D-bits instead of write-protecting SPTEs being
used to map an L2, which only happens when L1 does not enable EPT,
causing writes made by L2 to not be reflected in the dirty log when PML
is enabled:
$ ./vmx_dirty_log_test
Nested EPT: disabled
==== Test Assertion Failure ====
x86_64/vmx_dirty_log_test.c:151: test_bit(0, bmap)
pid=72052 tid=72052 errno=4 - Interrupted system call
(stack trace empty)
Page 0 incorrectly reported clean
Opportunistically replace the volatile casts with {READ,WRITE}_ONCE().
Link: https://lore.kernel.org/kvm/[email protected]/
Signed-off-by: David Matlack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
This patch extracts the code to send and receive data into a new
helper named send_recv_data() in network_helpers.c and export it
in network_helpers.h.
This helper will be used for MPTCP BPF selftests.
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/5231103be91fadcce3674a589542c63b6a5eedd4.1712813933.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <[email protected]>
|