| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Adding kprobe session attach type name to attach_type_name,
so libbpf_bpf_attach_type_str returns proper string name for
BPF_TRACE_KPROBE_SESSION attach type.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Adding support to attach program in kprobe session mode
with bpf_program__attach_kprobe_multi_opts function.
Adding session bool to bpf_kprobe_multi_opts struct that allows
to load and attach the bpf program via kprobe session.
the attachment to create kprobe multi session.
Also adding new program loader section that allows:
SEC("kprobe.session/bpf_fentry_test*")
and loads/attaches kprobe program as kprobe session.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Adding support to attach bpf program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two kprobe multi links.
Adding new BPF_TRACE_KPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the bpf program on return
probe simply by returning zero or non zero from the entry bpf
program execution to execute or not the bpf program on return
probe respectively.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Bugs in memory allocation failure paths are quite common.
Add a test exercising those paths based on qstat and page pool
failure hook.
Running on bnxt:
# ./drivers/net/hw/pp_alloc_fail.py
KTAP version 1
1..1
# ethtool -G change retval: success
ok 1 pp_alloc_fail.test_pp_alloc
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
I initially wrote this test to validate commit be43b7489a3c ("net/mlx5e:
RX, Fix page_pool allocation failure recovery for striding rq") but mlx5
still doesn't have qstat. So I run it on bnxt, and while bnxt survives
I found the problem fixed in commit 730117730709 ("eth: bnxt: fix counting
packets discarded due to OOM and netpoll").
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
While we are not very interested in testing performance
it's useful to be able to generate a lot of traffic.
iperf is the simplest way of getting relatively high PPS.
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When picking TCP ports to use, avoid all below 10k.
This should lower the chance of collision or running
afoul whatever random policies may be on the host.
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The main use of the ip() wrapper over cmd() is that it can parse JSON.
cmd("ip -j link show") will return stdout as a string, and test has
to call json.loads(). With ip("link show", json=True) the return value
will be already parsed.
More tools (ethtool, bpftool etc.) support the --json switch.
To avoid having to wrap all of them individually create a tool()
helper.
Switch from -j to --json (for ethtool).
While at it consume the netns attribute at the ip() level.
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We created a separate directory for HW-only tests, recently.
Glue in the Python test library there, Python is a bit annoying
when it comes to using library code located "lower"
in the directory structure.
Reuse the Env class, but let tests require non-nsim setup.
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Jakub reports that some tests fail on netdev CI when executed in a debug
kernel.
Increase test timeout to 30m, this should hopefully be enough.
Also reduce test duration where possible for "slow" machines.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Merge series from Luca Ceresoli <[email protected]>:
This series applies various improvements to the DAPM documentation: a
rewrite of a few sections for clarity, style improvements and typo fixes.
Signed-off-by: Luca Ceresoli <[email protected]>
---
Changes in v2:
- avoid wrapping in patch 3 as suggested by Alex
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Luca Ceresoli (12):
ASoC: doc: dapm: fix typos
ASoC: doc: dapm: fix struct name
ASoC: doc: dapm: minor rewording
ASoC: doc: dapm: remove dash after colon
ASoC: doc: dapm: clarify it's an internal API
ASoC: doc: dapm: replace "map" with "graph"
ASoC: doc: dapm: extend initial descrption
ASoC: doc: dapm: describe how widgets and routes are registered
ASoC: doc: dapm: fix and improve section "Registering DAPM controls"
ASoC: doc: dapm: improve section "Codec/DSP Widget Interconnections"
ASoC: doc: dapm: update section "DAPM Widget Events"
ASoC: doc: dapm: update event types
Documentation/sound/soc/dapm-graph.svg | 375 +++++++++++++++++++++++++++++++++
Documentation/sound/soc/dapm.rst | 174 ++++++++++-----
2 files changed, 492 insertions(+), 57 deletions(-)
---
base-commit: c942a0cd3603e34dd2d7237e064d9318cb7f9654
change-id: 20240315-dapm-docs-79bd51f267db
Best regards,
--
Luca Ceresoli <[email protected]>
|
|
Some copy/paste leftover, this is never used.
Fixes: e3d9eac99afd ("selftests/bpf: wq: add bpf_wq_init() checks")
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
These stats are commonly. Support reporting those via netdev-genl queue
stats.
name: rx-hw-drops
name: rx-hw-drop-overruns
name: rx-csum-unnecessary
name: rx-csum-none
name: rx-csum-bad
name: rx-hw-gro-packets
name: rx-hw-gro-bytes
name: rx-hw-gro-wire-packets
name: rx-hw-gro-wire-bytes
name: rx-hw-drop-ratelimits
name: tx-hw-drops
name: tx-hw-drop-errors
name: tx-csum-none
name: tx-needs-csum
name: tx-hw-gso-packets
name: tx-hw-gso-bytes
name: tx-hw-gso-wire-packets
name: tx-hw-gso-wire-bytes
name: tx-hw-drop-ratelimits
Signed-off-by: Xuan Zhuo <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a selftests validating that it's possible to have some struct_ops
callback set declaratively, then disable it (by setting to NULL)
programmatically. Libbpf should detect that such program should
not be loaded. Otherwise, it will unnecessarily fail the loading
when the host kernel does not have the type information.
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
If struct_ops has one of program callbacks set declaratively and host
kernel is old and doesn't support this callback, libbpf will allow to
load such struct_ops as long as that callback was explicitly nulled-out
(presumably through skeleton). This is all working correctly, except we
won't reset corresponding program slot to NULL before bailing out, which
will lead to libbpf not detecting that BPF program has to be not
auto-loaded. Fix this by unconditionally resetting corresponding program
slot to NULL.
Fixes: c911fc61a7ce ("libbpf: Skip zeroed or null fields if not found in the kernel type.")
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
The strdup() function returns a pointer to a new string which is a
duplicate of the string "input". Memory for the new string is obtained
with malloc(), and need to be freed with free().
This patch adds these missing "free(input)" in parse_stats() to avoid
memory leak in veristat.c.
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/ded44f8865cd7f337f52fc5fb0a5fbed7d6bd641.1714374022.git.tanggeliang@kylinos.cn
|
|
The strdup() function returns a pointer to a new string which is a
duplicate of the string "ptr". Memory for the new string is obtained
with malloc(), and need to be freed with free().
This patch adds these missing "free(ptr)" in check_whitelist() and
check_blacklist() to avoid memory leaks in test_sockmap.c.
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/b76f2f4c550aebe4ab8ea73d23c4cbe4f06ea996.1714374022.git.tanggeliang@kylinos.cn
|
|
The cgroup1_hierarchy test uses setup_classid_environment to setup
cgroupv1 environment. The problem is that the environment is set in
/sys/fs/cgroup and therefore, if not run under an own mount namespace,
effectively deletes all system cgroups:
$ ls /sys/fs/cgroup | wc -l
27
$ sudo ./test_progs -t cgroup1_hierarchy
#41/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK
#41/2 cgroup1_hierarchy/test_root_cgid:OK
#41/3 cgroup1_hierarchy/test_invalid_level:OK
#41/4 cgroup1_hierarchy/test_invalid_cgid:OK
#41/5 cgroup1_hierarchy/test_invalid_hid:OK
#41/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK
#41/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK
#41/8 cgroup1_hierarchy/test_sleepable_prog:OK
#41 cgroup1_hierarchy:OK
Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED
$ ls /sys/fs/cgroup | wc -l
1
To avoid this, run setup_cgroup_environment first which will create an
own mount namespace. This only affects the cgroupv1_hierarchy test as
all other cgroup1 test progs already run setup_cgroup_environment prior
to running setup_classid_environment.
Also add a comment to the header of setup_classid_environment to warn
against this invalid usage in future.
Fixes: 360769233cc9 ("selftests/bpf: Add selftests for cgroup1 hierarchy")
Signed-off-by: Viktor Malik <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The verifier assumes that 'sk' field in 'struct socket' is valid
and non-NULL when 'socket' pointer itself is trusted and non-NULL.
That may not be the case when socket was just created and
passed to LSM socket_accept hook.
Fix this verifier assumption and adjust tests.
Reported-by: Liam Wisehart <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Fixes: 6fcd486b3a0a ("bpf: Refactor RCU enforcement in the verifier.")
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Drop the @selector from the kernel code, data, and TSS builders and
instead hardcode the respective selector in the helper. Accepting a
selector but not a base makes the selector useless, e.g. the data helper
can't create per-vCPU for FS or GS, and so loading GS with KERNEL_DS is
the only logical choice.
And for code and TSS, there is no known reason to ever want multiple
segments, e.g. there are zero plans to support 32-bit kernel code (and
again, that would require more than just the selector).
If KVM selftests ever do add support for per-vCPU segments, it'd arguably
be more readable to add a dedicated helper for building/setting the
per-vCPU segment, and move the common data segment code to an inner
helper.
Lastly, hardcoding the selector reduces the probability of setting the
wrong selector in the vCPU versus what was created by the VM in the GDT.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Initialize x86's various segments in the GDT during creation of relevant
VMs instead of waiting until vCPUs come along. Re-installing the segments
for every vCPU is both wasteful and confusing, as is installing KERNEL_DS
multiple times; NOT installing KERNEL_DS for GS is icing on the cake.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add a proper #define for the TSS selector instead of open coding 0x18 and
hoping future developers don't use that selector for something else.
Opportunistically rename the code and data selector macros to shorten the
names, align the naming with the kernel's scheme, and capture that they
are *kernel* segments.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Allocate x86's per-VM TSS at creation of a non-barebones VM. Like the
GDT, the TSS is needed to actually run vCPUs, i.e. every non-barebones VM
is all but guaranteed to allocate the TSS sooner or later.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Now that the per-VM, on-demand allocation logic in kvm_setup_gdt() and
vcpu_init_descriptor_tables() is gone, fold them into vcpu_init_sregs().
Note, both kvm_setup_gdt() and vcpu_init_descriptor_tables() configured the
GDT, which is why it looks like kvm_setup_gdt() disappears.
Opportunistically delete the pointless zeroing of the IDT limit (it was
being unconditionally overwritten by vcpu_init_descriptor_tables()).
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Replace the switch statement on vm->mode in x86's vcpu_init_sregs()'s with
a simple assert that the VM has a 48-bit virtual address space. A switch
statement is both overkill and misleading, as the existing code incorrectly
implies that VMs with LA57 would need different to configuration for the
LDT, TSS, and flat segments. In all likelihood, the only difference that
would be needed for selftests is CR4.LA57 itself.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Allocate the GDT during creation of non-barebones VMs instead of waiting
until the first vCPU is created, as the whole point of non-barebones VMs
is to be able to run vCPUs, i.e. the GDT is going to get allocated no
matter what.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Map x86's exception handlers at VM creation, not vCPU setup, as the
mapping is per-VM, i.e. doesn't need to be (re)done for every vCPU.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Initialize the IDT and exception handlers for all non-barebones VMs and
vCPUs on x86. Forcing tests to manually configure the IDT just to save
8KiB of memory is a terrible tradeoff, and also leads to weird tests
(multiple tests have deliberately relied on shutdown to indicate success),
and hard-to-debug failures, e.g. instead of a precise unexpected exception
failure, tests see only shutdown.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Rename vcpu_setup() to be more descriptive and precise, there is a whole
lot of "setup" that is done for a vCPU that isn't in said helper.
No functional change intended.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Move x86's various descriptor table helpers in processor.c up above
kvm_arch_vm_post_create() and vcpu_setup() so that the helpers can be
made static and invoked from the aforementioned functions.
No functional change intended.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Explicitly clobber the guest IDT in the "delete memslot" test, which
expects the deleted memslot to result in either a KVM emulation error, or
a triple fault shutdown. A future change to the core selftests library
will configuring the guest IDT and exception handlers by default, i.e.
will install a guest #PF handler and put the guest into an infinite #NPF
loop (the guest hits a !PRESENT SPTE when trying to vector a #PF, and KVM
reinjects the #PF without fixing the #NPF, because there is no memslot).
Note, it's not clear whether or not KVM's behavior is reasonable in this
case, e.g. arguably KVM should try (and fail) to emulate in response to
the #NPF. But barring a goofy/broken userspace, this scenario will likely
never happen in practice. Punt the KVM investigation to the future.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Rework platform_info_test to actually handle and verify the expected #GP
on RDMSR when the associated KVM capability is disabled. Currently, the
test _deliberately_ doesn't handle the #GP, and instead lets it escalated
to a triple fault shutdown.
In addition to verifying that KVM generates the correct fault, handling
the #GP will be necessary (without even more shenanigans) when a future
change to the core KVM selftests library configures the IDT and exception
handlers by default (the test subtly relies on the IDT limit being '0').
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
As a first step toward gracefully handling the expected #GP on RDMSR in
platform_info_test, move the test's assert on the non-faulting RDMSR
result into the guest itself. This will allow using a unified flow for
the host userspace side of things.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Fix an off-by-one bug in the initialization of the GDT limit, which as
defined in the SDM is inclusive, not exclusive.
Note, vcpu_init_descriptor_tables() gets the limit correct, it's only
vcpu_setup() that is broken, i.e. only tests that _don't_ invoke
vcpu_init_descriptor_tables() can have problems. And the fact that KVM
effectively initializes the GDT twice will be cleaned up in the near
future.
Signed-off-by: Ackerley Tng <[email protected]>
[sean: rewrite changelog]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Now that kvm_vm_arch exists, move the GDT, IDT, and TSS fields to x86's
implementation, as the structures are firmly x86-only.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Move the base types unique to KVM selftests out of kvm_util.h and into a
new header, kvm_util_types.h. This will allow kvm_util_arch.h, i.e. core
arch headers, to reference common types, e.g. vm_vaddr_t and vm_paddr_t.
No functional change intended.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Effectively revert the movement of code from kvm_util.h => kvm_util_base.h,
as the TL;DR of the justification for the move was to avoid #idefs and/or
circular dependencies between what ended up being ucall_common.h and what
was (and now again, is), kvm_util.h.
But avoiding #ifdef and circular includes is trivial: don't do that. The
cost of removing kvm_util_base.h is a few extra includes of ucall_common.h,
but that cost is practically nothing. On the other hand, having a "base"
version of a header that is really just the header itself is confusing,
and makes it weird/hard to choose names for headers that actually are
"base" headers, e.g. to hold core KVM selftests typedefs.
For all intents and purposes, this reverts commit
7d9a662ed9f0403e7b94940dceb81552b8edb931.
Reviewed-by: Ackerley Tng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Override vcpu_arch_put_guest() to randomly force emulation on supported
accesses. Force emulation of LOCK CMPXCHG as well as a regular MOV to
stress KVM's emulation of atomic accesses, which has a unique path in
KVM's emulator.
Arbitrarily give all the decisions 50/50 odds; absent much, much more
sophisticated infrastructure for generating random numbers, it's highly
unlikely that doing more than a coin flip with affect selftests' ability
to find KVM bugs.
This is effectively a regression test for commit 910c57dfa4d1 ("KVM: x86:
Mark target gfn of emulated atomic instruction as dirty").
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Introduce a macro, vcpu_arch_put_guest(), for "putting" values to memory
from guest code in "interesting" situations, e.g. when writing memory that
is being dirty logged. Structure the macro so that arch code can provide
a custom implementation, e.g. x86 will use the macro to force emulation of
the access.
Use the helper in dirty_log_test, which is of particular interest (see
above), and in xen_shinfo_test, which isn't all that interesting, but
provides a second usage of the macro with a different size operand
(uint8_t versus uint64_t), i.e. to help verify that the macro works for
more than just 64-bit values.
Use "put" as the verb to align with the kernel's {get,put}_user()
terminology.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add a global snapshot of kvm_is_forced_emulation_enabled() and sync it to
all VMs by default so that core library code can force emulation, e.g. to
allow for easier testing of the intersections between emulation and other
features in KVM.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Move memstress' random bool logic into common code to avoid reinventing
the wheel for basic yes/no decisions. Provide an outer wrapper to handle
the basic/common case of just wanting a 50/50 chance of something
happening.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add a global guest_random_state instance, i.e. a pseudo-RNG, so that an
RNG is available for *all* tests. This will allow randomizing behavior
in core library code, e.g. x86 will utilize the pRNG to conditionally
force emulation of writes from within common guest code.
To allow for deterministic runs, and to be compatible with existing tests,
allow tests to override the seed used to initialize the pRNG.
Note, the seed *must* be overwritten before a VM is created in order for
the seed to take effect, though it's perfectly fine for a test to
initialize multiple VMs with different seeds.
And as evidenced by memstress_guest_code(), it's also a-ok to instantiate
more RNGs using the global seed (or a modified version of it). The goal
of the global RNG is purely to ensure that _a_ source of random numbers is
available, it doesn't have to be the _only_ RNG.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Define _GNU_SOURCE is the base CFLAGS instead of relying on selftests to
manually #define _GNU_SOURCE, which is repetitive and error prone. E.g.
kselftest_harness.h requires _GNU_SOURCE for asprintf(), but if a selftest
includes kvm_test_harness.h after stdio.h, the include guards result in
the effective version of stdio.h consumed by kvm_test_harness.h not
defining asprintf():
In file included from x86_64/fix_hypercall_test.c:12:
In file included from include/kvm_test_harness.h:11:
../kselftest_harness.h:1169:2: error: call to undeclared function
'asprintf'; ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
1169 | asprintf(&test_name, "%s%s%s.%s", f->name,
| ^
When including the rseq selftest's "library" code, #undef _GNU_SOURCE so
that rseq.c controls whether or not it wants to build with _GNU_SOURCE.
Reported-by: Muhammad Usama Anjum <[email protected]>
Acked-by: Claudio Imbrenda <[email protected]>
Acked-by: Oliver Upton <[email protected]>
Acked-by: Anup Patel <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Writing various root-only files, omit "sudo" when already running as root
to allow running the NX hugepage test on systems with a minimal rootfs,
i.e. without sudo.
Signed-off-by: Brendan Jackman <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[sean: name the helper do_sudo() instead of maybe_sudo(), massage changelog]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Robert reported the following when booting a CXL host with Restricted CXL
Host (RCH) topology:
[ 39.815379] cxl_acpi ACPI0017:00: not a cxl_port device
[ 39.827123] WARNING: CPU: 46 PID: 1754 at drivers/cxl/core/port.c:592 to_cxl_port+0x56/0x70 [cxl_core]
... plus some related subsequent NULL pointer dereference:
[ 40.718708] BUG: kernel NULL pointer dereference, address: 00000000000002d8
The iterator to walk the PCIe path did not account for RCH topology.
However RCH does not support hotplug and the memory exported by the
Restricted CXL Device (RCD) should be covered by HMAT and therefore no
access_coordinate is needed. Add check to see if the endpoint device is
RCD and skip calculation.
Also add a call to cxl_endpoint_get_perf_coordinates() in cxl_test in order
to exercise the topology iterator. The dev_is_pci() check added is to help
with this test and should be harmless for normal operation.
Reported-by: Robert Richter <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Fixes: 592780b8391f ("cxl: Fix retrieving of access_coordinates in PCIe path")
Reviewed-by: Dan Williams <[email protected]>
Tested-by: Robert Richter <[email protected]>
Reviewed-by: Robert Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
Some new SOF changes depend on the fixes there.
|
|
The sources for the powerpc selftests are arranged into sub-directories.
However when the tests are built and installed, the sub-directories are
squashed, losing the structure.
For example, with the current code the result of installing the selftests is:
$ tree tools/testing/selftests/kselftest_install
tools/testing/selftests/kselftest_install
├── kselftest
│ ├── ktap_helpers.sh
│ ├── module.sh
│ ├── prefix.pl
│ └── runner.sh
├── kselftest-list.txt
├── powerpc
│ ├── alignment_handler
│ ├── attr_test
│ ├── back_to_back_ebbs_test
│ ├── bad_accesses
│ ├── bhrb_filter_map_test
│ ├── bhrb_no_crash_wo_pmu_test
│ ├── blacklisted_events_test
│ ├── cache_shape
│ ├── close_clears_pmcc_test
│ ├── context_switch
│ ├── copy_first_unaligned
...
│ ├── settings
...
│ └── wild_bctr
└── run_kselftest.sh
All the powerpc tests are squashed into the single powerpc directory. In
particular, note that there is a single `settings` file, even though
there are multiple settings files in the powerpc selftest sources. One
of the settings files ends up installed, depending on install order,
even if they have different contents.
Similarly if there were two tests with the same name in different
sub-directories they would clobber each other.
Fix it by replicating the directory structure of the source tree into
the install directory. The result being for example:
$ tree tools/testing/selftests/kselftest_install
tools/testing/selftests/kselftest_install
├── kselftest
│ ├── ktap_helpers.sh
│ ├── module.sh
│ ├── prefix.pl
│ └── runner.sh
├── kselftest-list.txt
├── powerpc
│ ├── alignment
│ │ ├── alignment_handler
│ │ └── copy_first_unaligned
│ ├── benchmarks
│ │ ├── context_switch
│ │ ├── exec_target
│ │ ├── fork
│ │ ├── futex_bench
│ │ ├── gettimeofday
│ │ ├── mmap_bench
│ │ ├── null_syscall
│ │ └── settings
...
│ ├── eeh
│ │ ├── eeh-basic.sh
│ │ ├── eeh-functions.sh
│ │ └── settings
...
│ └── vphn
│ └── test-vphn
└── run_kselftest.sh
Note multiple settings files in different sub-directories.
This change also has the effect of changing the names of the tests from
the point of view of the kselftest runner. Before the tests are named
eg:
powerpc:copy_first_unaligned
powerpc:cache_shape
powerpc:reg_access_test
After, the test collection names include the sub-directory:
powerpc/alignment:copy_first_unaligned
powerpc/cache_shape:cache_shape
powerpc/pmu/ebb:reg_access_test
That means whereas previously all powerpc tests could be run with:
$ ./run_kselftest.sh -c powerpc
After the change it's necessary to pass a regex that matches all powerpc
entries, eg:
$ ./run_kselftest.sh -c "powerpc.*"
The latter form also works before and after the change.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
The pmu Makefile has grown more sub directories over the years. Rather
than open coding the rules for each subdir, use for loops.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Build breaks when executing make with run_tests for sub-folders
under powerpc. This is because, CFLAGS and GIT_VERSION macros are
defined in Makefile of toplevel powerpc folder.
make: Entering directory '/home/maddy/linux/tools/testing/selftests/powerpc/mm'
gcc hugetlb_vs_thp_test.c ../harness.c ../utils.c -o /home/maddy/selftest_output//hugetlb_vs_thp_test
hugetlb_vs_thp_test.c:6:10: fatal error: utils.h: No such file or directory
6 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
Fix this by adding the flags.mk in each sub-folder Makefile. Also remove
the CFLAGS and GIT_VERSION macros from powerpc/ folder Makefile since
the same is definied in flags.mk
Signed-off-by: Madhavan Srinivasan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
When running `make -C powerpc/pmu run_tests` from top level selftests
directory, currently this error is being reported:
make: Entering directory '/home/maddy/linux/tools/testing/selftests/powerpc/pmu'
Makefile:40: warning: overriding recipe for target 'emit_tests'
../../lib.mk:111: warning: ignoring old recipe for target 'emit_tests'
gcc -m64 count_instructions.c ../harness.c event.c lib.c ../utils.c loop.S -o /home/maddy/selftest_output//count_instructions
In file included from count_instructions.c:13:
event.h:12:10: fatal error: utils.h: No such file or directory
12 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This is due to missing of include path in CFLAGS. That is, CFLAGS and
GIT_VERSION macros are defined in the powerpc/ folder Makefile which
in this case is not involved.
To address the failure in case of executing specific sub-folder test
directly, a new rule file has been addded by the patch called "flags.mk"
under selftest/powerpc/ folder and is linked to all the Makefile of
powerpc/pmu sub-folders.
Reported-by: Sachin Sant <[email protected]>
Signed-off-by: Madhavan Srinivasan <[email protected]>
Tested-by: Sachin Sant <[email protected]>
[mpe: Fixup ifeq, make GIT_VERSION simply expanded to avoid re-executing git describe]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|