| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When freeing a->b it is good practice to set a->b to NULL using
zfree(&a->b) so that when we have a bug where a reference to a freed 'a'
pointer is kept somewhere, we can more quickly cause a segfault if some
code tries to use a->b.
This is mostly done but some new cases were introduced recently, convert
them to zfree().
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/ZjmbHHrjIm5YRIBv@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The documentation mentions KVM_CAP_PPC_RADIX_MMU, but the defines in the
kvm headers spell it KVM_CAP_PPC_MMU_RADIX. Similarly with
KVM_CAP_PPC_MMU_HASH_V3.
Fixes: c92701322711 ("KVM: PPC: Book3S HV: Add userspace interfaces for POWER9 MMU")
Signed-off-by: Joel Stanley <[email protected]>
Acked-by: Paul Mackerras <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
udev-hid-bpf is still not installed everywhere, and we should probably
not assume it is installed automatically.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Peter Hutterer <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
The only interesting bit is the HAT switch, and we use a BPF program
to fix it. So ensure this works correctly.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Peter Hutterer <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
More in line with the other test_* files.
No code change
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Peter Hutterer <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
We need to slightly change base_device.py for supporting HID-BPF,
so instead of monkey patching, let's just embed it in the kernel tree.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Peter Hutterer <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
This tablets gets a lot of things wrong:
- the secondary button is reported through Secondary Tip Switch
- the third button is reported through Invert
We need to add some out of proximity intermediate state when moving
back and forth with the eraser mode as it can only be triggered by
physically returning the pen, meaning that the tolerated transitions
can never happen.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Peter Hutterer <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
The values are taken from the HID-BPF file.
Basically we are recomputing the array provided there.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Peter Hutterer <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Those tablets don't need special initialization, but are reporting
the events with the wrong usages:
- tip switch is used when the eraser should be used
- eraser is used instead of the secondary barrel switch
Add tests for those so we don't regress in the future.
Currently we set x/y tilt to 0 to not trigger the bpf program
compensate_coordinates_by_tilt()
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Peter Hutterer <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
All the *_WITH*BUTTON states were almost identical except for the
button itself.
I need to add a new device with a third button, and adding a bunch of
states is going to be quite cumbersome.
So convert the `button` parameter of PenState as a boolean, and store
which button is the target as an argument to all functions that need it.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Peter Hutterer <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
few required changes:
- we need to count how many times a udev 'bind' event happens
- we need to tell `udev-hid-bpf` to not automatically attach the
provided HID-BPF objects
- we need to manually attach the ones from the kernel tree, and wait
for the second udev 'bind' event to happen
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Peter Hutterer <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
We need to slightly change base_device.py for supporting HID-BPF,
so instead of monkey patching, let's just embed it in the kernel tree.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Peter Hutterer <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC Kconfig Updates for v6.10
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <[email protected]>
* tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: config: enable ARCH_CANAAN in defconfig
RISC-V: drop SOC_VIRT for ARCH_VIRT
RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE
RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP
RISC-V: Drop unused SOC_CANAAN
reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
Link: https://lore.kernel.org/r/20240503-mardi-underling-3d81a9f97329@spud
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Added a test for bound computation in MUL when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: David Faust <[email protected]>
Cc: Jose Marchesi <[email protected]>
Cc: Elena Zannoni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Added a test for bound computation in XOR and OR when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: David Faust <[email protected]>
Cc: Jose Marchesi <[email protected]>
Cc: Elena Zannoni <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When building either tools/bpf/bpftool, or tools/testing/selftests/hid,
(the same Makefile is used for these), clang generates many instances of
the following:
"clang: warning: -lLLVM-17: 'linker' input unused"
Quentin points out that the LLVM version is only required in $(LIBS),
not in $(CFLAGS), so the fix is to remove it from CFLAGS.
Suggested-by: Quentin Monnet <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Cast operation has a higher precedence than addition. The code here
wants to zero the 2nd half of the 64-bit metadata, but due to a pointer
arithmetic mistake, it writes the zero at offset 16 instead.
Just adding parentheses around "data + 4" would fix this, but I think
this will be slightly better readable with array syntax.
I was unable to test this with tools/testing/selftests/bpf/vmtest.sh,
because my glibc is newer than glibc in the provided VM image.
So I just checked the difference in the compiled code.
objdump -S tools/testing/selftests/bpf/xdp_do_redirect.test.o:
- *((__u32 *)data) = 0x42; /* metadata test value */
+ ((__u32 *)data)[0] = 0x42; /* metadata test value */
be7: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax
bee: c7 00 42 00 00 00 movl $0x42,(%rax)
- *((__u32 *)data + 4) = 0;
+ ((__u32 *)data)[1] = 0;
bf4: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax
- bfb: 48 83 c0 10 add $0x10,%rax
+ bfb: 48 83 c0 04 add $0x4,%rax
bff: c7 00 00 00 00 00 movl $0x0,(%rax)
Fixes: 5640b6d89434 ("selftests/bpf: fix "metadata marker" getting overwritten by the netstack")
Signed-off-by: Michal Schmidt <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The bpf programs that this patch changes require the BPF_PROG macro.
The BPF_PROG macro is defined in the libbpf's bpf_tracing.h.
Some tests include bpf_tcp_helpers.h which includes bpf_tracing.h.
They don't need other things from bpf_tcp_helpers.h other than
bpf_tracing.h. This patch simplifies it by directly including
the bpf_tracing.h.
The motivation of this unnecessary code churn is to retire
the bpf_tcp_helpers.h by directly using vmlinux.h. Right now,
the main usage of the bpf_tcp_helpers.h is the partial kernel
socket definitions (e.g. socket, sock, tcp_sock). While the test
cases continue to grow, fields are kept adding to those partial
socket definitions (e.g. the recent bpf_cc_cubic.c test which
tried to extend bpf_tcp_helpers.c but eventually used the
vmlinux.h instead).
The idea is to retire bpf_tcp_helpers.c and consistently use
vmlinux.h for the tests that require the kernel sockets. This
patch tackles the obvious tests that can directly use bpf_tracing.h
instead of bpf_tcp_helpers.h.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Align the behavior for gcc and clang builds by interpreting unset
`ARCH` and `CROSS_COMPILE` variables in `LLVM` builds as a sign that the
user wants to build for the host architecture.
This patch preserves the properties that setting the `ARCH` variable to an
unknown value will trigger an error that complains about insufficient
information, and that a set `CROSS_COMPILE` variable will override the
target triple that is determined based on presence/absence of `ARCH`.
When compiling with clang, i.e., `LLVM` is set, an unset `ARCH` variable in
combination with an unset `CROSS_COMPILE` variable, i.e., compiling for
the host architecture, leads to compilation failures since `lib.mk` can
not determine the clang target triple. In this case, the following error
message is displayed for each subsystem that does not set `ARCH` in its
own Makefile before including `lib.mk` (lines wrapped at 75 chrs):
make[1]: Entering directory '/mnt/build/linux/tools/testing/selftests/
sysctl'
../lib.mk:33: *** Specify CROSS_COMPILE or add '--target=' option to
lib.mk. Stop.
make[1]: Leaving directory '/mnt/build/linux/tools/testing/selftests/
sysctl'
In the same scenario a gcc build would default to the host architecture,
i.e., it would use plain `gcc`.
Fixes: 795285ef2425 ("selftests: Fix clang cross compilation")
Reviewed-by: Mark Brown <[email protected]>
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
Fix this by using selftests/lib.mk facilities for tracking local header
file dependencies: add them to LOCAL_HDRS, leaving only the .c files to
be passed to the compiler.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: 8e289f454289 ("selftests/resctrl: Add resctrl.h into build deps")
Cc: Ilpo Järvinen <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Acked-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
While trying to fix this, I noticed that:
a) selftests/lib.mk already avoids the problem, and
b) The binderfs Makefile indavertently bypasses the selftests/lib.mk
build system, and quitely uses Make's implicit build rules for .c files
instead.
The Makefile attempts to set up both a dependency and a source file,
neither of which was needed, because lib.mk is able to automatically
handle both. This line:
binderfs_test: binderfs_test.c
...causes Make's implicit rules to run, which builds binderfs_test
without ever looking at lib.mk.
Fix this by simply deleting the "binderfs_test:" Makefile target and
letting lib.mk handle it instead.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: 6e29225af902 ("binderfs: port tests to test harness infrastructure")
Cc: Christian Brauner <[email protected]>
Signed-off-by: John Hubbard <[email protected]>
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn") marked functions that call
exit() as __noreturn but it did not change the return type of these
functions from 'void' to 'int' like it should have (since a noreturn
function by definition cannot return an integer because it does not
return...) because there were many tests that return the result of the
ksft_exit functions, even though it has never been used due to calling
exit().
Now that all uses of 'return ksft_exit...()' have been cleaned up
properly, change the types of the ksft_exit...() functions to void to
match their __noreturn nature.
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the call to ksft_exit_pass(), as __noreturn prevents the
compiler from warning that a caller of ksft_exit_pass() does not return
a value because the program will terminate upon calling these functions.
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the call to ksft_exit_pass(), as __noreturn prevents the
compiler from warning that a caller of ksft_exit_pass() does not return
a value because the program will terminate upon calling these functions
(which is what the comment alluded to as well).
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_skip(), as __noreturn prevents
the compiler from warning that a caller of ksft_exit_skip() does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_{pass,fail}(), as __noreturn
prevents the compiler from warning that a caller of the ksft_exit
functions does not return a value because the program will terminate
upon calling these functions.
Just removing 'return' would have resulted in
!ret ? ksft_exit_pass() : ksft_exit_fail();
so convert that into the more idiomatic
if (ret)
ksft_exit_fail();
ksft_exit_pass();
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_pass(), as __noreturn prevents
the compiler from warning that a caller of ksft_exit_pass() does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_{pass,fail}(), as __noreturn
prevents the compiler from warning that a caller of the ksft_exit
functions does not return a value because the program will terminate
upon calling these functions.
Just removing 'return' would have resulted in
!ret ? ksft_exit_pass() : ksft_exit_fail();
so convert that into the more idiomatic
if (ret)
ksft_exit_fail();
ksft_exit_pass();
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
There is one use of bash specific syntax in the script. Change it to the
equivalent POSIX syntax. This doesn't change functionality and allows
the test to be run on shells other than bash.
Reported-by: Mike Looijmans <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Fixes: 4a679c5afca0 ("selftests: Add test to verify power supply properties")
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
There are a couple uses of bash specific syntax in the script. Change
them to the equivalent POSIX syntax. This doesn't change functionality
and allows non-bash test scripts to make use of these helpers.
Reported-by: Mike Looijmans <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Fixes: 2dd0b5a8fcc4 ("selftests: ktap_helpers: Add a helper to finish the test")
Fixes: 14571ab1ad21 ("kselftest: Add new test for detecting unprobed Devicetree devices")
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This test outputs lots of information. Let's conform the core part of
the test to TAP and leave the information printing messages for now.
Include ktap_helpers.sh to print conformed logs. Use KSFT_* macros to
return the correct exit code for the kselftest framework and CIs to
understand the exit status.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Let the compilers (clang) know that this function would just call
exit() and would never return. It is needed to avoid false positive
static analysis errors. All similar functions calling exit()
unconditionally have been marked as __noreturn.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When logging an error from calling waitpid() on the child we print a
misleading error message saying that the error we report was returned by
the chilld. Fix this to say the error is from waitpid().
Applied after fixing merge conflict:
Shuah Khan <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When the child exits during the clone3() selftest we use WEXITSTATUS() to
get the exit status from the process without first checking WIFEXITED() to
see if the result will be valid. This can lead to incorrect results, for
example if the child exits due to signal. Add a WIFEXTED() check and report
any non-standard exit as a failure, using EXIT_FAILURE as the exit status
for call_clone3() since we otherwise report 0 or negative errnos.
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Shuah reported a compiler warning with an Ubuntu GCC 13 build, I've been
unable to reproduce it but hopefully this fixes the issue:
clone3_set_tid.c:136:43: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ {aka ‘long unsigned int’} [-Wformat=]
Reported-by: Shuah Khan <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
In order to facilitate debugging of issues from automated runs of the ftrace
selftests turn on verbose logging by default when run from the kselftest
runner. This is primarily used by automated systems where developers may
not have direct access to the system so defaulting to providing diagnostic
information which might help debug problems seems like a good idea.
When tests pass no extra output is generated, when they fail a full log of
the test run is provided. Since this really is rather verbose when there are
a large number of test failures or output is slow (eg, with a serial
console) this could substantially increase the run time for the tests which
might present problems with timeout detection for affected systems,
hopefully we keep the tests running well enough that this is not too much
of an issue.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
When -v is specified ftracetest will dump logs of test execution to the
console which if -K is also specified for KTAP output will result in
output that is not properly KTAP formatted. All that's required for KTAP
formatting is that anything we log have a '#' at the start of the line so
we can improve things by washing the output through a simple read loop.
This will help automated parsers when verbose mode is enabled.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Use ksft_exit_fail_perror() to print the value of errno and its string
form. This is the first user of the ksft_exit_fail_perror() and proves
the usefulness of this API.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add a version of ksft_exit_fail_msg() which prints the errno and its
string form with ease. There is no benefit of exit message without
errno. Whenever some error occurs, instead of printing errno manually,
this function would be very helpful. In the next TAP ports or new tests,
this function will be used instead of ksft_exit_fail_msg() as it prints
errno.
Resolved merge conflict found in next between the following commits:
f7d5bcd35d42 ("selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn")
f07041728422 ("selftests: add ksft_exit_fail_perror()")
Reported-by: Stephen Rothwell <[email protected]>
Shuah Khan <[email protected]>
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The comment on top of the file is used by many developers to glance over
all the available functions. Add the recently added ksft_perror() to it.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The test results reported for the clone3_set_tid tests interact poorly with
automation for running kselftest since the reported test names include TIDs
dynamically allocated at runtime. A lot of automation for running kselftest
will compare runs by looking at the test name to identify if the same test
is being run so changing names make it look like the testsuite has been
updated to include new tests. This makes the results display less clearly
and breaks cases like bisection.
Address this by providing a brief description of the tests and logging that
along with the stable parameters for the test currently logged. The TIDs
are already logged separately in existing logging except for the final test
which has a new log message added. We also tweak the formatting of the
logging of expected/actual values for clarity.
There are still issues with the logging of skipped tests (many are simply
not logged at all when skipped and all are logged with different names) but
these are less disruptive since the skips are all based on not being run as
root, a condition likely to be stable for a given test system.
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Every test calls its cleanup function at the end of it's test function.
After the cleanup function pointer is added to the test framework this
can be simplified to executing the callback function at the end of the
generic test running function.
Make test cleanup functions static and call them from the end of
run_single_test() from the resctrl_test's cleanup function pointer.
Signed-off-by: Maciej Wieczor-Retman <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Ctrl-c handler isn't aware of what test is currently running. Because of
that it executes all cleanups even if they aren't necessary. Since the
ctrl-c handler uses the sa_sigaction system no parameters can be passed
to it as function arguments.
Add a global variable to make ctrl-c handler aware of the currently run
test and only execute the correct cleanup callback.
Signed-off-by: Maciej Wieczor-Retman <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Resctrl selftests use very similar functions to cleanup after
themselves. This creates a lot of code duplication. Also not being
hooked to the test framework means that ctrl-c handler isn't aware of
what test is currently running and executes all cleanups even though
only one is needed.
Add a function pointer to the resctrl_test struct and attach to it
cleanup functions from individual tests.
Signed-off-by: Maciej Wieczor-Retman <[email protected]>
Reviewed-by: Reinette Chatre <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Improve the TAP messages as well.
Reviewed-by: T.J. Mercier <[email protected]>
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Add more logic code to skip the tests if particular configuration isn't
available to make sure that either we skip each test or mark it pass/fail.
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|