aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2023-08-15tools: ynl: add more info to KeyErrors on missing attrsJakub Kicinski1-3/+12
When developing specs its useful to know which attr space YNL was trying to find an attribute in on key error. Instead of printing: KeyError: 0 add info about the space: Exception: Space 'vport' has no attribute with value '0' Reviewed-by: Donald Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-15selftests: seg6: add selftest for NEXT-C-SID flavor in SRv6 End.X behaviorPaolo Lungaroni2-0/+1214
This selftest is designed for testing the support of NEXT-C-SID flavor for SRv6 End.X behavior. It instantiates a virtual network composed of several nodes: hosts and SRv6 routers. Each node is realized using a network namespace that is properly interconnected to others through veth pairs, according to the topology depicted in the selftest script file. The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged by hosts for communicating with each other. Such routers i) apply different SRv6 Policies to the traffic received from connected hosts, considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID compression mechanism for encoding several SRv6 segments within a single 128-bit SID address, referred to as a Compressed SID (C-SID) container. The NEXT-C-SID is provided as a "flavor" of the SRv6 End.X behavior, enabling it to properly process the C-SID containers. The correct execution of the enabled NEXT-C-SID SRv6 End.X behavior is verified through reachability tests carried out between hosts belonging to the same VPN. Signed-off-by: Paolo Lungaroni <[email protected]> Co-developed-by: Andrea Mayer <[email protected]> Signed-off-by: Andrea Mayer <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-14selftests/bpf: Add various more tcx test casesDaniel Borkmann3-0/+462
Add several new tcx test cases to improve test coverage. This also includes a few new tests with ingress instead of clsact qdisc, to cover the fix from commit dc644b540a2d ("tcx: Fix splat in ingress_destroy upon tcx_entry_free"). # ./test_progs -t tc [...] #234 tc_links_after:OK #235 tc_links_append:OK #236 tc_links_basic:OK #237 tc_links_before:OK #238 tc_links_chain_classic:OK #239 tc_links_chain_mixed:OK #240 tc_links_dev_cleanup:OK #241 tc_links_dev_mixed:OK #242 tc_links_ingress:OK #243 tc_links_invalid:OK #244 tc_links_prepend:OK #245 tc_links_replace:OK #246 tc_links_revision:OK #247 tc_opts_after:OK #248 tc_opts_append:OK #249 tc_opts_basic:OK #250 tc_opts_before:OK #251 tc_opts_chain_classic:OK #252 tc_opts_chain_mixed:OK #253 tc_opts_delete_empty:OK #254 tc_opts_demixed:OK #255 tc_opts_detach:OK #256 tc_opts_detach_after:OK #257 tc_opts_detach_before:OK #258 tc_opts_dev_cleanup:OK #259 tc_opts_invalid:OK #260 tc_opts_mixed:OK #261 tc_opts_prepend:OK #262 tc_opts_replace:OK #263 tc_opts_revision:OK [...] Summary: 44/38 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/8699efc284b75ccdc51ddf7062fa2370330dc6c0.1692029283.git.daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <[email protected]>
2023-08-14netlink: specs: devlink: extend health reporter dump attributes by port indexJiri Pirko2-0/+11
Allow user to pass port index for health reporter dump request. Re-generate the related code. Signed-off-by: Jiri Pirko <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-14netlink: specs: devlink: extend per-instance dump commands to accept ↵Jiri Pirko2-26/+643
instance attributes Extend per-instance dump command definitions to accept instance attributes. Allow parsing of devlink handle attributes so they could be used for instance selection. Re-generate the related code. Signed-off-by: Jiri Pirko <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-14netlink: specs: devlink: add commands that do per-instance dumpJiri Pirko2-0/+3352
Add the definitions for the commands that do per-instance dump and re-generate the related code. Signed-off-by: Jiri Pirko <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-14selftests/bpf: Clean up fmod_ret in bench_rename test scriptYipeng Zou1-1/+1
Running the bench_rename test script, the following error occurs: # ./benchs/run_bench_rename.sh base : 0.819 ± 0.012M/s kprobe : 0.538 ± 0.009M/s kretprobe : 0.503 ± 0.004M/s rawtp : 0.779 ± 0.020M/s fentry : 0.726 ± 0.007M/s fexit : 0.691 ± 0.007M/s benchmark 'rename-fmodret' not found The bench_rename_fmodret has been removed in commit b000def2e052 ("selftests: Remove fmod_ret from test_overhead"), thus remove it from the runners in the test script. Fixes: b000def2e052 ("selftests: Remove fmod_ret from test_overhead") Signed-off-by: Yipeng Zou <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-08-14selftests/bpf: Fix repeat option when kfunc_call verification failsYipeng Zou1-1/+1
There is no way where topts.repeat can be set to 1 when tc_test fails. Fix the typo where the break statement slipped by one line. Fixes: fb66223a244f ("selftests/bpf: add test for accessing ctx from syscall program type") Signed-off-by: Yipeng Zou <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Li Zetao <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-08-14libbpf: Set close-on-exec flag on gzopenMarco Vedovati1-2/+2
Enable the close-on-exec flag when using gzopen. This is especially important for multithreaded programs making use of libbpf, where a fork + exec could race with libbpf library calls, potentially resulting in a file descriptor leaked to the new process. This got missed in 59842c5451fe ("libbpf: Ensure libbpf always opens files with O_CLOEXEC"). Fixes: 59842c5451fe ("libbpf: Ensure libbpf always opens files with O_CLOEXEC") Signed-off-by: Marco Vedovati <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-08-14selftests: forwarding: Add test case for traffic redirection from a locked portIdo Schimmel1-0/+36
Check that traffic can be redirected from a locked bridge port and that it does not create locked FDB entries. Cc: Hans J. Schultz <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-14selftests: openvswitch: add explicit drop testcaseAdrian Moreno1-0/+35
Test explicit drops generate the right drop reason. Also, verify that the kernel rejects flows with actions following an explicit drop. Acked-by: Aaron Conole <[email protected]> Signed-off-by: Adrian Moreno <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-14selftests: openvswitch: add drop reason testcaseAdrian Moreno1-1/+66
Test if the correct drop reason is reported when OVS drops a packet due to an explicit flow. Acked-by: Aaron Conole <[email protected]> Signed-off-by: Adrian Moreno <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-14net: openvswitch: add explicit drop actionEric Garver1-4/+18
From: Eric Garver <[email protected]> This adds an explicit drop action. This is used by OVS to drop packets for which it cannot determine what to do. An explicit action in the kernel allows passing the reason _why_ the packet is being dropped or zero to indicate no particular error happened (i.e: OVS intentionally dropped the packet). Since the error codes coming from userspace mean nothing for the kernel, we squash all of them into only two drop reasons: - OVS_DROP_EXPLICIT_WITH_ERROR to indicate a non-zero value was passed - OVS_DROP_EXPLICIT to indicate a zero value was passed (no error) e.g. trace all OVS dropped skbs # perf trace -e skb:kfree_skb --filter="reason >= 0x30000" [..] 106.023 ping/2465 skb:kfree_skb(skbaddr: 0xffffa0e8765f2000, \ location:0xffffffffc0d9b462, protocol: 2048, reason: 196611) reason: 196611 --> 0x30003 (OVS_DROP_EXPLICIT) Also, this patch allows ovs-dpctl.py to add explicit drop actions as: "drop" -> implicit empty-action drop "drop(0)" -> explicit non-error action drop "drop(42)" -> explicit error action drop Signed-off-by: Eric Garver <[email protected]> Co-developed-by: Adrian Moreno <[email protected]> Signed-off-by: Adrian Moreno <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-11bpftool: fix perf help messageDaniel T. Lee1-1/+1
Currently, bpftool perf subcommand has typo with the help message. $ tools/bpf/bpftool/bpftool perf help Usage: bpftool perf { show | list } bpftool perf help } Since this bpftool perf subcommand help message has the extra bracket, this commit fix the typo by removing the extra bracket. Signed-off-by: Daniel T. Lee <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-08-10Merge tag 'for-netdev' of ↵Jakub Kicinski11-91/+206
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Martin KaFai Lau says: ==================== pull-request: bpf-next 2023-08-09 We've added 19 non-merge commits during the last 6 day(s) which contain a total of 25 files changed, 369 insertions(+), 141 deletions(-). The main changes are: 1) Fix array-index-out-of-bounds access when detaching from an already empty mprog entry from Daniel Borkmann. 2) Adjust bpf selftest because of a recent llvm change related to the cpu-v4 ISA from Eduard Zingerman. 3) Add uprobe support for the bpf_get_func_ip helper from Jiri Olsa. 4) Fix a KASAN splat due to the kernel incorrectly accepted an invalid program using the recent cpu-v4 instruction from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: bpf: btf: Remove two unused function declarations bpf: lru: Remove unused declaration bpf_lru_promote() selftests/bpf: relax expected log messages to allow emitting BPF_ST selftests/bpf: remove duplicated functions bpf, docs: Fix small typo and define semantics of sign extension selftests/bpf: Add bpf_get_func_ip test for uprobe inside function selftests/bpf: Add bpf_get_func_ip tests for uprobe on function entry bpf: Add support for bpf_get_func_ip helper for uprobe program selftests/bpf: Add a movsx selftest for sign-extension of R10 bpf: Fix an incorrect verification success with movsx insn bpf, docs: Formalize type notation and function semantics in ISA standard bpf: change bpf_alu_sign_string and bpf_movsx_string to static libbpf: Use local includes inside the library bpf: fix bpf_dynptr_slice() to stop return an ERR_PTR. bpf: fix inconsistent return types of bpf_xdp_copy_buf(). selftests/bpf: fix the incorrect verification of port numbers. selftests/bpf: Add test for detachment on empty mprog entry bpf: Fix mprog detachment for empty mprog entry bpf: bpf_struct_ops: Remove unnecessary initial values of variables ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski35-100/+344
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/intel/igc/igc_main.c 06b412589eef ("igc: Add lock to safeguard global Qbv variables") d3750076d464 ("igc: Add TransmissionOverrun counter") drivers/net/ethernet/microsoft/mana/mana_en.c a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive") a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h") 92272ec4107e ("eth: add missing xdp.h includes in drivers") net/mptcp/protocol.h 511b90e39250 ("mptcp: fix disconnect vs accept race") b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning") tools/testing/selftests/net/mptcp/mptcp_join.sh c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test") 03668c65d153 ("selftests: mptcp: join: rework detailed report") Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-10Merge tag 'net-6.5-rc6' of ↵Linus Torvalds18-52/+245
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, wireless and bpf. Still trending up in size but the good news is that the "current" regressions are resolved, AFAIK. We're getting weirdly many fixes for Wake-on-LAN and suspend/resume handling on embedded this week (most not merged yet), not sure why. But those are all for older bugs. Current release - regressions: - tls: set MSG_SPLICE_PAGES consistently when handing encrypted data over to TCP Current release - new code bugs: - eth: mlx5: correct IDs on VFs internal to the device (IPU) Previous releases - regressions: - phy: at803x: fix WoL support / reporting on AR8032 - bonding: fix incorrect deletion of ETH_P_8021AD protocol VID from slaves, leading to BUG_ON() - tun: prevent tun_build_skb() from exceeding the packet size limit - wifi: rtw89: fix 8852AE disconnection caused by RX full flags - eth/PCI: enetc: fix probing after 6fffbc7ae137 ("PCI: Honor firmware's device disabled status"), keep PCI devices around even if they are disabled / not going to be probed to be able to apply quirks on them - eth: prestera: fix handling IPv4 routes with nexthop IDs Previous releases - always broken: - netfilter: re-work garbage collection to avoid races between user-facing API and timeouts - tunnels: fix generating ipv4 PMTU error on non-linear skbs - nexthop: fix infinite nexthop bucket dump when using maximum nexthop ID - wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems() Misc: - unix: use consistent error code in SO_PEERPIDFD - ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO, in prep for upcoming IETF RFC" * tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits) net: hns3: fix strscpy causing content truncation issue net: tls: set MSG_SPLICE_PAGES consistently ibmvnic: Ensure login failure recovery is safe from other resets ibmvnic: Do partial reset on login failure ibmvnic: Handle DMA unmapping of login buffs in release functions ibmvnic: Unmap DMA login rsp buffer on send login fail ibmvnic: Enforce stronger sanity checks on login response net: mana: Fix MANA VF unload when hardware is unresponsive netfilter: nf_tables: remove busy mark and gc batch API netfilter: nft_set_hash: mark set element as dead when deleting from packet path netfilter: nf_tables: adapt set backend to use GC transaction API netfilter: nf_tables: GC transaction API to avoid race with control plane selftests/bpf: Add sockmap test for redirecting partial skb data selftests/bpf: fix a CI failure caused by vsock sockmap test bpf, sockmap: Fix bug that strp_done cannot be called bpf, sockmap: Fix map type error in sock_map_del_link xsk: fix refcount underflow in error path ipv6: adjust ndisc_is_useropt() to also return true for PIO selftests: forwarding: bridge_mdb: Make test more robust selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet ...
2023-08-10Merge tag 'for-netdev' of ↵Jakub Kicinski2-1/+87
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Martin KaFai Lau says: ==================== pull-request: bpf 2023-08-09 We've added 5 non-merge commits during the last 7 day(s) which contain a total of 6 files changed, 102 insertions(+), 8 deletions(-). The main changes are: 1) A bpf sockmap memleak fix and a fix in accessing the programs of a sockmap under the incorrect map type from Xu Kuohai. 2) A refcount underflow fix in xsk from Magnus Karlsson. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Add sockmap test for redirecting partial skb data selftests/bpf: fix a CI failure caused by vsock sockmap test bpf, sockmap: Fix bug that strp_done cannot be called bpf, sockmap: Fix map type error in sock_map_del_link xsk: fix refcount underflow in error path ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09Merge tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of ↵Linus Torvalds3-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Revert a patch that unconditionally resolved addresses to inlines in callchains, something that was done before when DWARF mode was asked for, but could as well be done when just frame pointers (the default) was selected. This enriches the callchains with inlines but the way to resolve it is gross right now, relying on addr2line, and even if we come up with an efficient way of processing all the associated DWARF info for a big file as vmlinux is, this has to be something people opt-in, as it will still result in overheads, so revert it until we get this done in a saner way. - Update the x86 msr-index.h header with the kernel original, no change in tooling output, just addresses a tools/perf build warning. - Resolve a regression where special "tool events", such as "duration_time" were being presented for all CPUs, when it only makes sense to show it for the workload, that is, just once. * tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf stat: Don't display zero tool counts tools arch x86: Sync the msr-index.h copy with the kernel sources Revert "perf report: Append inlines to non-DWARF callchains"
2023-08-09selftests/bpf: Add sockmap test for redirecting partial skb dataXu Kuohai2-0/+86
Add a test case to check whether sockmap redirection works correctly when data length returned by stream_parser is less than skb->len. In addition, this test checks whether strp_done is called correctly. The reason is that we returns skb->len - 1 from the stream_parser, so the last byte in the skb will be held by strp->skb_head. Therefore, if strp_done is not called to free strp->skb_head, we'll get a memleak warning. Signed-off-by: Xu Kuohai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-08-09selftests/bpf: fix a CI failure caused by vsock sockmap testXu Kuohai1-1/+1
BPF CI has reported the following failure: Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir ./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11 vsock_unix_redir_connectible:FAIL:1514 ./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b vsock_unix_redir_connectible:FAIL:1518 ./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0 It’s because the recv(... MSG_DONTWAIT) syscall in the test case is called before the queued work sk_psock_backlog() in the kernel finishes executing. So the data to be read is still queued in psock->ingress_skb and cannot be read by the user program. Therefore, the non-blocking recv() reads nothing and reports an EAGAIN error. So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls select() to wait for data to be readable or timeout before calls recv(). Fixes: d61bd8c1fd02 ("selftests/bpf: add a test case for vsock sockmap") Signed-off-by: Xu Kuohai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-08-09selftests/tc-testing: verify that a qdisc can be grafted onto a taprio classVladimir Oltean1-0/+50
The reason behind commit af7b29b1deaa ("Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") was that the patch it reverted caused a crash when attaching a CBS shaper to one of the taprio classes. Prevent that from happening again by adding a test case for it, which now passes correctly in both offload and software modes. Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Pedro Tammela <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests/tc-testing: test that taprio can only be attached as rootVladimir Oltean2-0/+66
Check that the "Can only be attached as root qdisc" error message from taprio is effective by attempting to attach it to a class of another taprio qdisc. That operation should fail. In the bug that was squashed by change "net/sched: taprio: try again to report q->qdiscs[] to qdisc_leaf()", grafting a child taprio to a root software taprio would be misinterpreted as a change() to the root taprio. Catch this by looking at whether the base-time of the root taprio has changed to follow the base-time of the child taprio, something which should have absolutely never happened assuming correct semantics. Vinicius points out that looking at "base_time" in the tc qdisc show output is unreliable because user space is in a race with the kernel applying the setting. So we create a helper bash script which waits while there is any pending schedule. Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Pedro Tammela <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests/tc-testing: add ptp_mock Kconfig dependencyVladimir Oltean1-1/+2
For offloaded tc-taprio testing with netdevsim, the mock-up PHC driver is used. Suggested-by: Victor Nogueira <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09net/sched: taprio: dump class stats for the actual q->qdiscs[]Vladimir Oltean1-1/+1
This makes a difference for the software scheduling mode, where dev_queue->qdisc_sleeping is the same as the taprio root Qdisc itself, but when we're talking about what Qdisc and stats get reported for a traffic class, the root taprio isn't what comes to mind, but q->qdiscs[] is. To understand the difference, I've attempted to send 100 packets in software mode through class 8001:5, and recorded the stats before and after the change. Here is before: $ tc -s class show dev eth0 class taprio 8001:1 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:2 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:3 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:4 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:5 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:6 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:7 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:8 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 and here is after: class taprio 8001:1 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:2 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:3 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:4 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:5 root Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:6 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:7 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:8 root leaf 800d: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 The most glaring (and expected) difference is that before, all class stats reported the global stats, whereas now, they really report just the counters for that traffic class. Finally, Pedro Tammela points out that there is a tc selftest which checks specifically which handle do the child Qdiscs corresponding to each class have. That's changing here - taprio no longer reports tcm->tcm_info as the same handle "1:" as itself (the root Qdisc), but 0 (the handle of the default pfifo child Qdiscs). Since iproute2 does not print a child Qdisc handle of 0, adjust the test's expected output. Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: mlxsw: router_bridge_lag: Add a new selftestPetr Machata1-0/+50
Add a selftest to verify enslavement to a LAG with upper after fresh devlink reload. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Danielle Ratson <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/373a7754daa4dac32759a45095f47b08a2a869c8.1691498735.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: bridge_mdb: Make test more robustIdo Schimmel1-4/+4
Some test cases check that the group timer is (or isn't) 0. Instead of grepping for "0.00" grep for " 0.00" as the former can also match "260.00" which is the default group membership interval. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: bridge_mdb_max: Fix failing test with old libnetIdo Schimmel1-4/+10
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: bridge_mdb: Fix failing test with old libnetIdo Schimmel1-22/+24
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: tc_flower_l2_miss: Fix failing test with old libnetIdo Schimmel1-5/+8
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. For IP unicast packets, this can be solved by prefixing mausezahn invocations with "ip vrf exec". However, IP multicast packets do not perform routing and simply egress the bound device, which does not exist in this case. Fix by specifying the source and destination MAC of the packet which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: tc_tunnel_key: Make filters more specificIdo Schimmel1-3/+6
The test installs filters that match on various IP fragments (e.g., no fragment, first fragment) and expects a certain amount of packets to hit each filter. This is problematic as the filters are not specific enough and can match IP packets (e.g., IGMP) generated by the stack, resulting in failures [1]. Fix by making the filters more specific and match on more fields in the IP header: Source IP, destination IP and protocol. [1] # timeout set to 0 # selftests: net/forwarding: tc_tunnel_key.sh # TEST: tunnel_key nofrag (skip_hw) [FAIL] # packet smaller than MTU was not tunneled # INFO: Could not test offloaded functionality not ok 89 selftests: net/forwarding: tc_tunnel_key.sh # exit=1 Fixes: 533a89b1940f ("selftests: forwarding: add tunnel_key "nofrag" test case") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Acked-by: Davide Caratti <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: tc_flower: Relax success criterionIdo Schimmel1-4/+4
The test checks that filters that match on source or destination MAC were only hit once. A host can send more than one packet with a given source or destination MAC, resulting in failures. Fix by relaxing the success criterion and instead check that the filters were not hit zero times. Using tc_check_at_least_x_packets() is also an option, but it is not available in older kernels. Fixes: 07e5c75184a1 ("selftests: forwarding: Introduce tc flower matching tests") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: tc_actions: Use ncat instead of ncIdo Schimmel1-2/+4
The test relies on 'nc' being the netcat version from the nmap project. While this seems to be the case on Fedora, it is not the case on Ubuntu, resulting in failures such as [1]. Fix by explicitly using the 'ncat' utility from the nmap project and the skip the test in case it is not installed. [1] # timeout set to 0 # selftests: net/forwarding: tc_actions.sh # TEST: gact drop and ok (skip_hw) [ OK ] # TEST: mirred egress flower redirect (skip_hw) [ OK ] # TEST: mirred egress flower mirror (skip_hw) [ OK ] # TEST: mirred egress matchall mirror (skip_hw) [ OK ] # TEST: mirred_egress_to_ingress (skip_hw) [ OK ] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # TEST: mirred_egress_to_ingress_tcp (skip_hw) [FAIL] # server output check failed # INFO: Could not test offloaded functionality not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1 Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: ethtool_mm: Skip when MAC Merge is not supportedIdo Schimmel1-5/+13
MAC Merge cannot be tested with veth pairs, resulting in failures: # ./ethtool_mm.sh [...] TEST: Manual configuration with verification: swp1 to swp2 [FAIL] Verification did not succeed Fix by skipping the test when the interfaces do not support MAC Merge. Fixes: e6991384ace5 ("selftests: forwarding: add a test for MAC Merge layer") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: hw_stats_l3_gre: Skip when using veth pairsIdo Schimmel1-0/+2
Layer 3 hardware stats cannot be used when the underlying interfaces are veth pairs, resulting in failures: # ./hw_stats_l3_gre.sh TEST: ping gre flat [ OK ] TEST: Test rx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 TEST: Test tx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 Fix by skipping the test when used with veth pairs. Fixes: 813f97a26860 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: ethtool_extended_state: Skip when using veth pairsIdo Schimmel1-0/+2
Ethtool extended state cannot be tested with veth pairs, resulting in failures: # ./ethtool_extended_state.sh TEST: Autoneg, No partner detected [FAIL] Expected "Autoneg", got "Link detected: no" [...] Fix by skipping the test when used with veth pairs. Fixes: 7d10bcce98cd ("selftests: forwarding: Add tests for ethtool extended state") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: ethtool: Skip when using veth pairsIdo Schimmel1-0/+2
Auto-negotiation cannot be tested with veth pairs, resulting in failures: # ./ethtool.sh TEST: force of same speed autoneg off [FAIL] error in configuration. swp1 speed Not autoneg off [...] Fix by skipping the test when used with veth pairs. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: Add a helper to skip test when using veth pairsIdo Schimmel1-0/+11
A handful of tests require physical loopbacks to be used instead of veth pairs. Add a helper that these tests will invoke in order to be skipped when executed with veth pairs. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: Set default IPv6 traceroute utilityIdo Schimmel2-0/+3
The test uses the 'TROUTE6' environment variable to encode the name of the IPv6 traceroute utility. By default (without a configuration file), this variable is not set, resulting in failures: # ./ip6_forward_instats_vrf.sh TEST: ping6 [ OK ] TEST: Ip6InTooBigErrors [ OK ] TEST: Ip6InHdrErrors [FAIL] TEST: Ip6InAddrErrors [ OK ] TEST: Ip6InDiscards [ OK ] Fix by setting a default utility name and skip the test if the utility is not present. Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: bridge_mdb_max: Check iproute2 versionIdo Schimmel1-0/+5
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in errors: # ./bridge_mdb_max.sh INFO: 802.1d tests TEST: cfg4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: ctl4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: cfg6: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected [...] Fix by skipping the test if iproute2 is too old. Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: bridge_mdb: Check iproute2 versionIdo Schimmel1-0/+5
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in error: # ./bridge_mdb.sh INFO: # Host entries configuration tests TEST: Common host entries configuration tests (IPv4) [FAIL] Managed to add IPv4 host entry with a filter mode TEST: Common host entries configuration tests (IPv6) [FAIL] Managed to add IPv6 host entry with a filter mode TEST: Common host entries configuration tests (L2) [FAIL] Managed to add L2 host entry with a filter mode INFO: # Port group entries configuration tests - (*, G) Command "replace" is unknown, try "bridge mdb help". [...] Fix by skipping the test if iproute2 is too old. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: Switch off timeoutIdo Schimmel1-0/+1
The default timeout for selftests is 45 seconds, but it is not enough for forwarding selftests which can takes minutes to finish depending on the number of tests cases: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # TEST: IGMPv2 report 239.10.10.10 [ OK ] # TEST: IGMPv2 leave 239.10.10.10 [ OK ] # TEST: IGMPv3 report 239.10.10.10 is_include [ OK ] # TEST: IGMPv3 report 239.10.10.10 include -> allow [ OK ] # not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds Fix by switching off the timeout and setting it to 0. A similar change was done for BPF selftests in commit 6fc5916cc256 ("selftests: bpf: Switch off timeout"). Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: Skip test when no interfaces are specifiedIdo Schimmel1-0/+5
As explained in [1], the forwarding selftests are meant to be run with either physical loopbacks or veth pairs. The interfaces are expected to be specified in a user-provided forwarding.config file or as command line arguments. By default, this file is not present and the tests fail: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # Command line is not complete. Try option "help" # Failed to create netif not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1 [...] Fix by skipping a test if interfaces are not provided either via the configuration file or command line arguments. # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # SKIP: Cannot create interface. Name not specified ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP [1] tools/testing/selftests/net/forwarding/README Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09nexthop: Fix infinite nexthop bucket dump when using maximum nexthop IDIdo Schimmel1-0/+5
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop bucket dump callback always returns a positive number if nexthop buckets were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthop buckets are present. In the last recvmsg() call the dump callback will not fill in any nexthop buckets because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id 10 group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128 id 10 index 0 idle_time 6.66 nhid 1 id 10 index 1 idle_time 6.66 nhid 1 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # ip nexthop bucket id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148 id 4294967295 index 0 idle_time 6.61 nhid 1 id 4294967295 index 1 idle_time 6.61 nhid 1 +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09nexthop: Fix infinite nexthop dump when using maximum nexthop IDIdo Schimmel1-0/+5
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop dump callback always returns a positive number if nexthops were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthops are present. In the last recvmsg() call the dump callback will not fill in any nexthops because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip nexthop add id 1 blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36 id 1 blackhole recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip nexthop add id $((2**32-1)) blackhole # ip nexthop id 4294967295 blackhole id 4294967295 blackhole [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response: # ip nexthop add id $((2**32-1)) blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56 id 4294967295 blackhole +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: ab84be7e54fc ("net: Initial nexthop code") Reported-by: Petr Machata <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09tools: ynl-gen: add missing empty line between policiesJakub Kicinski1-0/+1
We're missing empty line between policies. DPLL will need this. Tested-by: Vadim Fedorenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09tools: ynl-gen: avoid rendering empty validate fieldJiri Pirko1-3/+4
When dont-validate flags are filtered out for do/dump op, the list may be empty. In that case, avoid rendering the validate field. Fixes: fa8ba3502ade ("ynl-gen-c.py: render netlink policies static for split ops") Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-08selftests/bpf: relax expected log messages to allow emitting BPF_STEduard Zingerman2-6/+33
Update [1] to LLVM BPF backend seeks to enable generation of BPF_ST instruction when CPUv4 is selected. This affects expected log messages for the following selftests: - log_fixup/missing_map - spin_lock/lock_id_mapval_preserve - spin_lock/lock_id_innermapval_preserve Expected messages in these tests hard-code instruction numbers for BPF programs compiled from C. These instruction numbers change when BPF_ST is allowed because single BPF_ST instruction replaces a pair of BPF_MOV/BPF_STX instructions, e.g.: r1 = 42; *(u32 *)(r10 - 8) = r1; ---> *(u32 *)(r10 - 8) = 42; This commit updates expected log messages to avoid matching specific instruction numbers (program position still could be uniquely identified). [1] https://reviews.llvm.org/D140804 "[BPF] support for BPF_ST instruction in codegen" Signed-off-by: Eduard Zingerman <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-08-08selftests/bpf: remove duplicated functionsKui-Feng Lee1-76/+17
The file cgroup_tcp_skb.c contains redundant implementations of the similar functions (create_server_sock_v6(), connect_client_server_v6() and get_sock_port_v6()) found in network_helpers.c. Let's eliminate these duplicated functions. Changes from v1: - Remove get_sock_port_v6() as well. v1: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Kui-Feng Lee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-08-08perf stat: Don't display zero tool countsIan Rogers1-0/+5
Andi reported (see link below) a regression when printing the 'duration_time' tool event, where it gets printed as "not counted" for most of the CPUs, fix it by skipping zero counts for tool events. Reported-by: Andi Kleen <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Tested-by: Andi Kleen <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Claire Jensen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/all/ZMlrzcVrVi1lTDmn@tassilo/ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.