| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2019-04-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) the bpf verifier fix to properly mark registers in all stack frames, from Paul.
2) preempt_enable_no_resched->preempt_enable fix, from Peter.
3) other misc fixes.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove the existing way to create netdevsim over rtnetlink and move the
netdev creation/destruction to dev probe, so for every probed port,
a netdevsim-netdev instance is created.
Adjust selftests to work with new interface.
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
With the model where dev is represented by devlink and ports are
represented by devlink ports, make debugfs file names independent
on netdev names. Change the topology to the one illustrated
by the following example:
$ ls /sys/kernel/debug/netdevsim/
netdevsim1
$ ls /sys/kernel/debug/netdevsim/netdevsim1/
bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports
$ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/
0 1
$ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/
bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec
$ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l
lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As previously introduce dev which is mapped 1:1 to a bus device covers
the purpose of the original shared device, merge the sdev code into dev.
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix misaligned default case branch for `prog dump` sub-command.
Reported-by: Quentin Monnet <[email protected]>
Cc: Yonghong Song <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add full support for btf command in bash-completion script.
Cc: Quentin Monnet <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Document usage and sample output format for `btf dump` sub-command.
Cc: Daniel Borkmann <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add new `btf dump` sub-command to bpftool. It allows to dump
human-readable low-level BTF types representation of BTF types. BTF can
be retrieved from few different sources:
- from BTF object by ID;
- from PROG, if it has associated BTF;
- from MAP, if it has associated BTF data; it's possible to narrow
down types to either key type, value type, both, or all BTF types;
- from ELF file (.BTF section).
Output format mostly follows BPF verifier log format with few notable
exceptions:
- all the type/field/param/etc names are enclosed in single quotes to
allow easier grepping and to stand out a little bit more;
- FUNC_PROTO output follows STRUCT/UNION/ENUM format of having one
line per each argument; this is more uniform and allows easy
grepping, as opposed to succinct, but inconvenient format that BPF
verifier log is using.
Cc: Daniel Borkmann <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Two easy cases of overlapping changes.
Signed-off-by: David S. Miller <[email protected]>
|
|
The test meant to use the saved value of errno. Given the current code, it
makes no practical difference however.
Fixes: bf598a8f0f77 ("bpftool: Improve handling of ENOENT on map dumps")
Signed-off-by: Benjamin Poirier <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The first test case, for pointer null checks, is equivalent to the
following pseudo-code. It checks that the verifier does not complain on
line 6 and recognizes that ptr isn't null.
1: ptr = bpf_map_lookup_elem(map, &key);
2: ret = subprog(ptr) {
3: return ptr != NULL;
4: }
5: if (ret)
6: value = *ptr;
The second test case, for packet bound checks, is equivalent to the
following pseudo-code. It checks that the verifier does not complain on
line 7 and recognizes that the packet is at least 1 byte long.
1: pkt_end = ctx.pkt_end;
2: ptr = ctx.pkt + 8;
3: ret = subprog(ptr, pkt_end) {
4: return ptr <= pkt_end;
5: }
6: if (ret)
7: value = *(u8 *)ctx.pkt;
Signed-off-by: Paul Chaignon <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Some binaries are generated when building libbpf from tools/lib/bpf/,
namely libbpf.so.0.0.2 and libbpf.so.0.
Add them to the local .gitignore.
Signed-off-by: Matteo Croce <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
"bpftool map create" has an infinite loop on "while (argc)". The error
case is missing.
Symptoms: when forgetting to type the keyword 'type' in front of 'hash':
$ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128
(infinite loop, taking all the CPU)
^C
After the patch:
$ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128
Error: unknown arg hash
Fixes: 0b592b5a01be ("tools: bpftool: add map create command")
Signed-off-by: Alban Crequy <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Song Liu <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Some seccomp flags will become exclusive, so the selftest needs to
be adjusted to mask those out and test them individually for the "all
flags" tests.
Cc: [email protected] # v5.0+
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Tycho Andersen <[email protected]>
Acked-by: James Morris <[email protected]>
|
|
Right now there is no way to query whether BPF flow_dissector program
is attached to a network namespace or not. In previous commit, I added
support for querying that info, show it when doing `bpftool net`:
$ bpftool prog loadall ./bpf_flow.o \
/sys/fs/bpf/flow type flow_dissector \
pinmaps /sys/fs/bpf/flow
$ bpftool prog
3: flow_dissector name _dissect tag 8c9e917b513dd5cc gpl
loaded_at 2019-04-23T16:14:48-0700 uid 0
xlated 656B jited 461B memlock 4096B map_ids 1,2
btf_id 1
...
$ bpftool net -j
[{"xdp":[],"tc":[],"flow_dissector":[]}]
$ bpftool prog attach pinned \
/sys/fs/bpf/flow/flow_dissector flow_dissector
$ bpftool net -j
[{"xdp":[],"tc":[],"flow_dissector":["id":3]}]
Doesn't show up in a different net namespace:
$ ip netns add test
$ ip netns exec test bpftool net -j
[{"xdp":[],"tc":[],"flow_dissector":[]}]
Non-json output:
$ bpftool net
xdp:
tc:
flow_dissector:
id 3
v2:
* initialization order (Jakub Kicinski)
* clear errno for batch mode (Quentin Monnet)
Signed-off-by: Stanislav Fomichev <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Currently, building bpf samples will cause the following error.
./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) ..
#define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */
^
./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE'
extern char bpf_log_buf[BPF_LOG_BUF_SIZE];
^~~~~~~~~~~~~~~~
Due to commit 4519efa6f8ea ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error")
hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is
defined in <stdint.h> header.
Even with this change, bpf selftests are running fine since these are built
with clang and it includes header(-idirafter) from clang/6.0.0/include.
(it has <stdint.h>)
clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \
-idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \
-Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \
llc -march=bpf -mcpu=generic -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o
But bpf samples are compiled with GCC, and it only searches and includes
headers declared at the target file. As '#include <stdint.h>' hasn't been
declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples.
gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \
-O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \
-I./tools/ lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c;
This commit add declaration of '#include <stdint.h>' to tools/lib/bpf/bpf.h
to fix this problem.
Signed-off-by: Daniel T. Lee <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Ran into it while testing; in bpf_object__init_maps() data can be NULL
in the case where no map section is present. Therefore we simply cannot
access data->d_size before NULL test. Move the pr_debug() where it's
safe to access.
Fixes: d859900c4c56 ("bpf, libbpf: support global data/bss/rodata sections")
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Andrii reported a corner case where e.g. global static data is present
in the BPF ELF file in form of .data/.bss/.rodata section, but without
any relocations to it. Such programs could be loaded before commit
d859900c4c56 ("bpf, libbpf: support global data/bss/rodata sections"),
whereas afterwards if kernel lacks support then loading would fail.
Add a probing mechanism which skips setting up libbpf internal maps
in case of missing kernel support. In presence of relocation entries,
we abort the load attempt.
Fixes: d859900c4c56 ("bpf, libbpf: support global data/bss/rodata sections")
Reported-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Set the proper bit in the configuration register when contextID tracing
has been requested by user space. That way PE_CONTEXT elements are
generated by the tracers when a process is installed on a CPU.
Signed-off-by: Mathieu Poirier <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Tested-by: Leo Yan <[email protected]>
Tested-by: Robert Walker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The test plan for TAP needs to be declared immediately after the header.
This adds the test plan API to kselftest.h and updates all callers to
declare their expected test counts.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Since sub-testing can now be detected by indentation level, this removes
KSFT_TAP_LEVEL so that subtests report their TAP header for later parsing.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This changes the selftest output so that each test's output is prefixed
with "# " as a TAP "diagnostic line".
This creates a bit of a kernel-specific TAP dialect where the diagnostics
precede the results. The TAP spec isn't entirely clear about this, though,
so I think it's the correct solution so as to keep interactive runs making
sense. If the output _followed_ the result line in the spec-suggested
YAML form, each test would dump all of its output at once instead of as
it went, making debugging harder.
This does, however, solve the recursive TAP output problem, as sub-tests
will simply be prefixed by "# ". Parsing sub-tests becomes a simple
problem of just removing the first two characters of a given top-level
test's diagnostic output, and parsing the results.
Note that the shell construct needed to both get an exit code from
the first command in a pipe and still filter the pipe (to add the "# "
prefix) uses a POSIX solution rather than the bash "pipefail" option
which is not supported by dash.
Since some test environments may have a very minimal set of utilities
available, the new prefixing code will fall back to doing line-at-a-time
prefixing if perl and/or stdbuf are not available.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
If a test was missing (e.g. wrong architecture, etc), the test runner
would incorrectly claim the test was non-executable. This adds an
existence check to report correctly.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The TAP version 13 spec requires a "plan" line, which has been missing.
Since we always know how many tests we're going to run, emit the count on
the plan line. This also fixes the result lines to remove the "1.." prefix
which is against spec, and to mark skips with the correct "# SKIP" suffix.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This moves the logic for running multiple tests into a single "run_many"
function of runner.sh. Both "run_tests" and "emit_tests" are modified to
use it. Summary handling is now controlled by the "per_test_logging"
shell flag.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This reuses the new runner.sh for the emit targets instead of manually
running each test via run_kselftest.sh.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
In order to improve the reusability of the kselftest test running logic,
this extracts the single-test logic from lib.mk into kselftest/runner.sh
which lib.mk can call directly. No changes in output.
As part of the change, this moves the "summary" Makefile logic around
to set a new "logfile" output. This will be used again in the future
"emit_tests" target as well.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Pull networking fixes from David Miller:
"Just the usual assortment of small'ish fixes:
1) Conntrack timeout is sometimes not initialized properly, from
Alexander Potapenko.
2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid
undefined behavior. From ZhangXiaoxu.
3) des1 field of descriptor in stmmac driver is initialized with the
wrong variable. From Yue Haibing.
4) Increase mlxsw pci sw reset timeout a little bit more, from Ido
Schimmel.
5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng.
6) Fallback refcount fix in TLS code, from Jakub Kicinski.
7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy.
8) Fix recursive locking in team driver, from Hangbin Liu.
9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski.
10) Don't use napi_alloc_frag() outside of softiq context of socionext
driver, from Ilias Apalodimas.
11) MAC address increment overflow in ncsi, from Tao Ren.
12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun.
13) ipv4_link_failure has to validate the headers that are actually
there because RAW sockets can pass in arbitrary garbage, from Eric
Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
ipv4: add sanity checks in ipv4_link_failure()
net/rose: fix unbound loop in rose_loopback_timer()
rxrpc: fix race condition in rxrpc_input_packet()
net: rds: exchange of 8K and 1M pool
net: vrf: Fix operation not supported when set vrf mac
net/ncsi: handle overflow when incrementing mac address
net: socionext: replace napi_alloc_frag with the netdev variant on init
net: atheros: fix spelling mistake "underun" -> "underrun"
spi: ST ST95HF NFC: declare missing of table
spi: Micrel eth switch: declare missing of table
net: stmmac: move stmmac_check_ether_addr() to driver probe
netfilter: fix nf_l4proto_log_invalid to log invalid packets
netfilter: never get/set skb->tstamp
netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON
Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK
dt-bindings: add an explanation for internal phy-mode
net/tls: don't leak IV and record seq when offload fails
net/tls: avoid potential deadlock in tls_set_device_offload_rx()
selftests/net: correct the return value for run_afpackettests
team: fix possible recursive locking when add slaves
...
|
|
So far, all BPF tc tunnel testcases encapsulate in the same network
protocol. Add an encap testcase that requires updating skb->protocol.
The 6in4 tunnel encapsulates an IPv6 packet inside an IPv4 tunnel.
Verify that bpf_skb_net_grow correctly updates skb->protocol to
select the right protocol handler in __netif_receive_skb_core.
The BPF program should also manually update the link layer header to
encode the right network protocol.
Changes v1->v2
- improve documentation of non-obvious logic
Signed-off-by: Willem de Bruijn <[email protected]>
Tested-by: Alan Maguire <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Now that we use skb-less flow dissector let's return true nhoff and
thoff. We used to adjust them by ETH_HLEN because that's how it was
done in the skb case. For VLAN tests that looks confusing: nhoff is
pointing to vlan parts :-\
Warning, this is an API change for BPF_PROG_TEST_RUN! Feel free to drop
if you think that it's too late at this point to fix it.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Right now we incorrectly return 'ret' which is always zero at that
point.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Export last_dissection map from flow dissector and use a known place in
tun driver to trigger BPF flow dissection.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
When flow dissector is called without skb, we want to make sure
bpf_skb_load_bytes invocations return error. Add small test which tries
to read single byte from a packet.
bpf_skb_load_bytes should always fail under BPF_PROG_TEST_RUN because
it was converted to the skb-less mode.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-04-22
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) allow stack/queue helpers from more bpf program types, from Alban.
2) allow parallel verification of root bpf programs, from Alexei.
3) introduce bpf sysctl hook for trusted root cases, from Andrey.
4) recognize var/datasec in btf deduplication, from Andrii.
5) cpumap performance optimizations, from Jesper.
6) verifier prep for alu32 optimization, from Jiong.
7) libbpf xsk cleanup, from Magnus.
8) other various fixes and cleanups.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree:
1) Add a selftest for icmp packet too big errors with conntrack, from
Florian Westphal.
2) Validate inner header in ICMP error message does not lie to us
in conntrack, also from Florian.
3) Initialize ct->timeout to calm down KASAN, from Alexander Potapenko.
4) Skip ICMP error messages from tunnels in IPVS, from Julian Anastasov.
5) Use a hash to expose conntrack and expectation ID, from Florian Westphal.
6) Prevent shift wrap in nft_chain_parse_hook(), from Dan Carpenter.
7) Fix broken ICMP ID randomization with NAT, also from Florian.
8) Remove WARN_ON in ebtables compat that is reached via syzkaller,
from Florian Westphal.
9) Fix broken timestamps since fb420d5d91c1 ("tcp/fq: move back to
CLOCK_MONOTONIC"), from Florian.
10) Fix logging of invalid packets in conntrack, from Andrei Vagin.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Build and run gpio when output directory is the src dir. gpio has
dependency on tools/gpio and builds tools/gpio objects in the src
directory in all cases making the src repo dirty even when object
relocation is specified.
This fixes the following commands from generating gpio objects in
the source repository:
make O=dir kselftest
export KBUILD_OUTPUT=dir; make kselftest
make O=dir -C tools/testing/selftests
expoert KBUILD_OUTPUT=dir; make -C tools/testing/selftests
The following commands still build gpio objects in the source repo
(gpio Makefile needs to fixed):
make O=dir kselftest TARGETS="gpio"
export KBUILD_OUTPUT=dir; make kselftest TARGETS="gpio"
make O=dir -C tools/testing/selftests TARGETS="gpio"
expoert KBUILD_OUTPUT=dir; make -C tools/testing/selftests TARGETS="gpio"
Signed-off-by: Shuah Khan <[email protected]>
|
|
Add nfit_test 'watermarks' for the dax_pmem, dax_pmem_core, and
dax_pmem_compat modules. This causes the nfit_test module to fail
loading in case any of these modules are also not overridden with the
ldconfig wrapped modules. Without this, nfit_test would sometimes fail
creation of device-dax namespaces on the nfit_test_bus with an unhelpful
error log such as:
dax_pmem dax5.0: could not reserve metadata
dax_pmem: probe of dax5.0 failed with error -16
Which was caused due to the unwrapped version of
devm_request_mem_region() being called.
Cc: Dan Williams <[email protected]>
Signed-off-by: Vishal Verma <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
Pull in v5.1-rc6 to resolve two conflicts. One is in BFQ, in just a
comment, and is trivial. The other one is a conflict due to a later fix
in the bio multi-page work, and needs a bit more care.
* tag 'v5.1-rc6': (770 commits)
Linux 5.1-rc6
block: make sure that bvec length can't be overflow
block: kill all_q_node in request_queue
x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority
coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping
mm/kmemleak.c: fix unused-function warning
init: initialize jump labels before command line option parsing
kernel/watchdog_hld.c: hard lockup message should end with a newline
kcov: improve CONFIG_ARCH_HAS_KCOV help text
mm: fix inactive list balancing between NUMA nodes and cgroups
mm/hotplug: treat CMA pages as unmovable
proc: fixup proc-pid-vm test
proc: fix map_files test on F29
mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock
mm: swapoff: shmem_unuse() stop eviction without igrab()
mm: swapoff: take notice of completion sooner
mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES
mm: swapoff: shmem_find_swap_entries() filter out other types
slab: store tagged freelist for off-slab slabmgmt
...
Signed-off-by: Jens Axboe <[email protected]>
|
|
Add a new test for Media Device Allocator API.
Media Device Allocator API to allows multiple drivers share a media device.
This API solves a very common use-case for media devices where one physical
device (an USB stick) provides both audio and video. When such media device
exposes a standard USB Audio class, a proprietary Video class, two or more
independent drivers will share a single physical USB bridge. In such cases,
it is necessary to coordinate access to the shared resource.
Using this API, drivers can allocate a media device with the shared struct
device as the key. Once the media device is allocated by a driver, other
drivers can get a reference to it. The media device is released when all
the references are released.
This test does a series of unbind/bind tests to make sure media device
is released correctly when it is no longer is use and when the last
driver releases the reference.
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The run_afpackettests will be marked as passed regardless the return
value of those sub-tests in the script:
--------------------
running psock_tpacket test
--------------------
[FAIL]
selftests: run_afpackettests [PASS]
Fix this by changing the return value for each tests.
Signed-off-by: Po-Hsu Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes:
- various tooling fixes
- kretprobe fixes
- kprobes annotation fixes
- kprobes error checking fix
- fix the default events for AMD Family 17h CPUs
- PEBS fix
- AUX record fix
- address filtering fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Avoid kretprobe recursion bug
kprobes: Mark ftrace mcount handler functions nokprobe
x86/kprobes: Verify stack frame on kretprobe
perf/x86/amd: Add event map for AMD Family 17h
perf bpf: Return NULL when RB tree lookup fails in perf_env__find_btf()
perf tools: Fix map reference counting
perf evlist: Fix side band thread draining
perf tools: Check maps for bpf programs
perf bpf: Return NULL when RB tree lookup fails in perf_env__find_bpf_prog_info()
tools include uapi: Sync sound/asound.h copy
perf top: Always sample time to satisfy needs of use of ordered queuing
perf evsel: Use hweight64() instead of hweight_long(attr.sample_regs_user)
tools lib traceevent: Fix missing equality check for strcmp
perf stat: Disable DIR_FORMAT feature for 'perf stat record'
perf scripts python: export-to-sqlite.py: Fix use of parent_id in calls_view
perf header: Fix lock/unlock imbalances when processing BPF/BTF info
perf/x86: Fix incorrect PEBS_REGS
perf/ring_buffer: Fix AUX record suppression
perf/core: Fix the address filtering fix
kprobes: Fix error check when reusing optimized probes
|
|
The BPF_PROG_LOAD condition for kernel version <= 5.1 is
log->len_total > UINT_MAX >> 8 /* (16 * 1024 * 1024) - 1 */
Signed-off-by: McCabe, Robert J <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This fixes the various compiler warnings when building the msgque
selftest. The primary change is using sys/msg.h instead of linux/msg.h
directly to gain the API declarations.
Fixes: 3a665531a3b7 ("selftests: IPC message queue copy feature test")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Test files created by test_create() and test_create_empty() tests will
stay in the $efivarfs_mount directory until the system was rebooted.
When the tester tries to run this efivarfs test again on the same
system, the immutable characteristics in that directory will cause some
"Operation not permitted" noises, and a false-positve test result as the
file was created in previous run.
--------------------
running test_create
--------------------
./efivarfs.sh: line 59: /sys/firmware/efi/efivars/test_create-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted
[PASS]
--------------------
running test_create_empty
--------------------
./efivarfs.sh: line 78: /sys/firmware/efi/efivars/test_create_empty-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted
[PASS]
--------------------
Create a file_cleanup() to remove those test files in the end of each
test to solve this issue.
For the test_create_read, we can move the clean up task to the end of
the test to ensure the system is clean.
Also, use this function to replace the existing file removal code.
Signed-off-by: Po-Hsu Lin <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
"make kselftest" fails with "Circular Makefile.o <- prepare dependency
dropped." error, when lib.mk invokes "make headers_install".
Make level 0: Main make calls selftests run_tests target
...
Make level n: selftests lib.mk invokes main make's headers_install
The secondary level make inherits builtin-rules which will use the rule
to generate Makefile.o and runs into "Circular Makefile.o <- prepare
dependency dropped." error, and kselftest compile fails.
Invoke headers_install target with --no-builtin-rules to avoid circular
error.
In addition, lib.mk installs headers in the default HDR_PATH, even when
build relocation is requested with O= or export KBUILD_OUTPUT. Fix the
problem by passing in INSTALL_HDR_PATH. The headers are installed under
the specified output "dir/usr".
Signed-off-by: Shuah Khan <[email protected]>
|
|
The run_netsocktests will be marked as passed regardless the actual test
result from the ./socket:
selftests: net: run_netsocktests
========================================
--------------------
running socket test
--------------------
[FAIL]
ok 1..6 selftests: net: run_netsocktests [PASS]
This is because the test script itself has been successfully executed.
Fix this by exit 1 when the test failed.
Signed-off-by: Po-Hsu Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch implements 9 tests for the freezer controller for
cgroup v2:
1) a simple test, which aims to freeze and unfreeze a cgroup with 100
processes
2) a more complicated tree test, which creates a hierarchy of cgroups,
puts some processes in some cgroups, and tries to freeze and unfreeze
different parts of the subtree
3) a forkbomb test: the test aims to freeze a forkbomb running in a
cgroup, kill all tasks in the cgroup and remove the cgroup without
the unfreezing.
4) rmdir test: the test creates two nested cgroups, freezes the parent
one, checks that the child can be successfully removed, and a new
child can be created
5) migration tests: the test checks migration of a task between
frozen cgroups: from a frozen to a running, from a running to a
frozen, and from a frozen to a frozen.
6) ptrace test: the test checks that it's possible to attach to
a process in a frozen cgroup, get some information and detach, and
the cgroup will remain frozen.
7) stopped test: the test checks that it's possible to freeze a cgroup
with a stopped task
8) ptraced test: the test checks that it's possible to freeze a cgroup
with a ptraced task
9) vfork test: the test checks that it's possible to freeze a cgroup
with a parent process waiting for the child process in vfork()
Expected output:
$ ./test_freezer
ok 1 test_cgfreezer_simple
ok 2 test_cgfreezer_tree
ok 3 test_cgfreezer_forkbomb
ok 4 test_cgrreezer_rmdir
ok 5 test_cgfreezer_migrate
ok 6 test_cgfreezer_ptrace
ok 7 test_cgfreezer_stopped
ok 8 test_cgfreezer_ptraced
ok 9 test_cgfreezer_vfork
Signed-off-by: Roman Gushchin <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Cc: [email protected]
|
|
If the cgroup destruction races with an exit() of a belonging
process(es), cg_kill_all() may fail. It's not a good reason to make
cg_destroy() fail and leave the cgroup in place, potentially causing
next test runs to fail.
Signed-off-by: Roman Gushchin <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Cc: [email protected]
|
|
Silly sizeof(pointer) vs sizeof(uint8_t[]) bug.
Link: http://lkml.kernel.org/r/20190414123009.GA12971@avx2
Fixes: e483b0208784 ("proc: test /proc/*/maps, smaps, smaps_rollup, statm")
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
F29 bans mapping first 64KB even for root making test fail. Iterate
from address 0 until mmap() works.
Gentoo (root):
openat(AT_FDCWD, "/dev/zero", O_RDONLY) = 3
mmap(NULL, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0
Gentoo (non-root):
openat(AT_FDCWD, "/dev/zero", O_RDONLY) = 3
mmap(NULL, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EPERM (Operation not permitted)
mmap(0x1000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0x1000
F29 (root):
openat(AT_FDCWD, "/dev/zero", O_RDONLY) = 3
mmap(NULL, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x1000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x2000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x3000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x4000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x5000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x6000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x7000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x8000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x9000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xa000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xb000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xc000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xd000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xe000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xf000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x10000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0x10000
Now all proc tests succeed on F29 if run as root, at last!
Link: http://lkml.kernel.org/r/20190414123612.GB12971@avx2
Signed-off-by: Alexey Dobriyan <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|