| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some log_test calls are done in a loop, and lead to the same log output.
This might prove tricky to deduplicate for automated tools. Instead, roll
the unique information from log_info to log_test, and drop the log_info.
This also leads to more compact and clearer output.
This change prompts rewording the messages so that they are not excessively
long.
Some check_err messages do not indicate what the issue actually is, so
reword them to say it's a "ping with", like is the case in some other
instances in this test.
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When rx-pktsNtoM reports a range that involves very low-valued range, such
as 0-64, the calculated length of the packet will be -4, because FCS is
subtracted from the value. mausezahn then confuses the value for an option
and bails out. As a result, the test dumps many mausezahn error messages.
Instead, cap the value at 0. mausezahn will use an appropriate minimum
packet length.
Cc: Vladimir Oltean <[email protected]>
Cc: Tobias Waldekranz <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
$ksft_skip is used to mark selftests that have tooling issues. The fact
that LLDPad is running, but shouldn't, is one such issue. Therefore have
bail_on_lldpad() bail with $ksft_skip.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Benjamin Poirier <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The variable should contain at least NUM_NETIFS interfaces, stored
as keys named "p$i", for i in `seq $NUM_NETIFS`.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Benjamin Poirier <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Bodies of busywait() and slowwait() functions are almost identical. Extract
the common code into a helper, loopy_wait, and convert busywait() and
slowwait() into trivial wrappers.
Moreover, the fact that slowwait() uses seconds for units is really not
intuitive, and the comment does not help much. Instead make the unit part
of the name of the argument to further clarify what units are expected.
Cc: Hangbin Liu <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Benjamin Poirier <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a Python test for the basic ops.
# ./net/nl_netdev.py
KTAP version 1
1..3
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Using "with" on an entire driver test env is supported already,
but it's also useful to use "with" on an individual nsim.
Reviewed-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Instead of a summary line print the full exception.
This makes debugging Python tests much easier.
Reviewed-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Developing Python tests is a bit annoying because when test fails
we only print the fail message and no info about which exact check
led to it. Print the location (the first line of this example is new):
# At /root/ksft-net-drv/./net/nl_netdev.py line 38:
# Check failed 0 != 10
not ok 3 nl_netdev.page_pool_check
Reviewed-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
YNL currently reports None for empty dump:
$ cli.py ...netdev.yaml --dump page-pool-get
None
This doesn't matter for the CLI but when writing YNL based tests
having to deal with either list or None is annoying. Limit the
None conversion to non-dump ops:
$ cli.py ...netdev.yaml --dump page-pool-get
[]
Reviewed-by: Donald Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"A fix to kselftest harness to prevent infinite loop triggered in an
assert in FIXTURE_TEARDOWN and a fix to a problem seen in being able
to stop subsystem-enable tests when sched events are being traced"
* tag 'linux_kselftest-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/harness: Prevent infinite loop due to Assert in FIXTURE_TEARDOWN
selftests/ftrace: Limit length in subsystem-enable tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
- Address a (valid) W=1 build warning
- Fix timer self-tests
- Annotate a KCSAN warning wrt. accesses to the tick_do_timer_cpu
global variable
- Address a !CONFIG_BUG build warning
* tag 'timers-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: kselftest: Fix build failure with NOLIBC
selftests: timers: Fix abs() warning in posix_timers test
selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn
selftests: timers: Fix posix_timers ksft_print_msg() warning
selftests: timers: Fix valid-adjtimex signed left-shift undefined behavior
bug: Fix no-return-statement warning with !CONFIG_BUG
timekeeping: Use READ/WRITE_ONCE() for tick_do_timer_cpu
selftests/timers/posix_timers: Reimplement check_timer_distribution()
irqflags: Explicitly ignore lockdep_hrtimer_exit() argument
|
|
Add FAULT_INJECTION_DEBUG_FS and FAILSLAB configurations to the kconfig
fragment for the iommfd selftests. These kconfigs are needed by the
iommufd_fail_nth test.
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The commit fc8b2a619469
("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
adds check of potential number of UDP segments vs
UDP_MAX_SEGMENTS in linux/virtio_net.h.
After this change certification test of USO guest-to-guest
transmit on Windows driver for virtio-net device fails,
for example with packet size of ~64K and mss of 536 bytes.
In general the USO should not be more restrictive than TSO.
Indeed, in case of unreasonably small mss a lot of segments
can cause queue overflow and packet loss on the destination.
Limit of 128 segments is good for any practical purpose,
with minimal meaningful mss of 536 the maximal UDP packet will
be divided to ~120 segments.
The number of segments for UDP packets is validated vs
UDP_MAX_SEGMENTS also in udp.c (v4,v6), this does not affect
quest-to-guest path but does affect packets sent to host, for
example.
It is important to mention that UDP_MAX_SEGMENTS is kernel-only
define and not available to user mode socket applications.
In order to request MSS smaller than MTU the applications
just uses setsockopt with SOL_UDP and UDP_SEGMENT and there is
no limitations on socket API level.
Fixes: fc8b2a619469 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
Signed-off-by: Yuri Benditovich <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use busywait helper to wait until socat listener is up to avoid "sleep" calls.
This reduces script execution time slighty (12s to 7s).
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Use socat, the different nc implementations have too much variance wrt.
supported options.
Avoid sleeping until listener is up, use busywait helper for this,
this also greatly reduces test duration.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Also lower ping interval, wait times (helpers get called several times)
and set nodad for ipv6 addresses: 20s down to 4s.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
prefer socat over nc, nc has too many incompatible versions around.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
While at it, use checktool helper.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The setup_ns helper makes the netns names random, so replace nsX with $nsX
everywhere.
Replace nc with socat, otherwise script fails on my system due to
incompatible nc versions ("nc: cannot use -p and -l").
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
... so it doesn't have to be repeated everywhere.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
swap test for "ip" with "conntrack", former is already accounted for
via setup_ns helper. Also switch to bash.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
While at it, address warnings generated by shellcheck and fix following
minor issues:
- some distros place netem in 'extra' modules package, so add a skip check for netem-attach
failure.
- tc prints a warning for the 100mbit class:
"Warning: sch_htb: quantum of class 10001 is big. Consider r2q change."
Silence this by increasing the divisor.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Replace nc with socat. Too many different implementations of nc
are around with incompatible options ("nc: cannot use -p and -l").
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Only relevant change is that netns names have random suffix names,
i.e. its safe to run this in parallel with other tests.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Also, fix two issues reported by Pablo Neira:
1. Must modprobe br_netfilter in case its not loaded,
else sysctl cannot be set.
2. ping for netns4 fails if rp_filter is enabled in bridge netns,
so set all and default to 0.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Doing so gets us dynamically generated netns names.
Also:
* do not assume rp_filter is disabled, if its on script failed
* reduce timeout (-W) for "expected to fail" ping commands
* don't print PASS line for basic sanity ping
* shellcheck cleanups
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
.. so this can start re-using existing lib.sh infra in next patches.
Several of these scripts will not work, e.g. because they assume
rp_filter is disabled, or reliance on a particular version/flavor
of "netcat" tool.
Add config settings for them.
nft_trans_stress.sh script is removed, it also exists in the nftables
userspace selftests. I do not see a reason to keep two versions in
different repositories/projects.
The settings file is removed for now:
It was used to increase the timeout to avoid slow scripts from getting
zapped by the 45s timeout, but some of the slow scripts can be sped up.
Re-add it later for scripts that cannot be sped up easily.
Update MAINTAINERS to reflect that future updates to netfilter
scripts should go through netfilter-devel@.
Signed-off-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We have two printk tests reading trace_pipe in non blocking way,
with the very same code. Moving that in new read_trace_pipe_iter
function.
Current read_trace_pipe is used from samples/bpf and needs to
do blocking read and printf of the trace_pipe data, using new
read_trace_pipe_iter to implement that.
Both printk tests do early checks for the number of found messages
and can bail earlier, but I did not find any speed difference w/o
that condition, so I did not complicate the change more for that.
Some of the samples/bpf programs use read_trace_pipe function,
so I kept that interface untouched. I did not see any issues with
affected samples/bpf programs other than there's slight change in
read_trace_pipe output. The current code uses puts that adds new
line after the printed string, so we would occasionally see extra
new line. With this patch we read output per lines, so there's no
need to use puts and we can use just printf instead without extra
new line.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
s/at at/at a/
Signed-off-by: Thorsten Blum <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
As Mark explains ksft_min_kernel_version() can't be compiled with nolibc,
it doesn't implement uname().
Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Reported-by: Mark Brown <[email protected]>
Signed-off-by: Oleg Nesterov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Closes: https://lore.kernel.org/all/[email protected]/
|
|
Building with clang results in the following warning:
posix_timers.c:69:6: warning: absolute value function 'abs' given an
argument of type 'long long' but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
^
So switch to using llabs() instead.
Fixes: 0bc4b0cf1570 ("selftests: add basic posix timers selftests")
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
__noreturn
After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement
check_timer_distribution()"), clang warns:
tools/testing/selftests/timers/../kselftest.h:398:6: warning: variable 'major' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2)
| ^~~~~~~~~~~~
tools/testing/selftests/timers/../kselftest.h:401:9: note: uninitialized use occurs here
401 | return major > min_major || (major == min_major && minor >= min_minor);
| ^~~~~
tools/testing/selftests/timers/../kselftest.h:398:6: note: remove the '||' if its condition is always false
398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2)
| ^~~~~~~~~~~~~~~
tools/testing/selftests/timers/../kselftest.h:395:20: note: initialize the variable 'major' to silence this warning
395 | unsigned int major, minor;
| ^
| = 0
This is a false positive because if uname() fails, ksft_exit_fail_msg()
will be called, which unconditionally calls exit(), a noreturn function.
However, clang does not know that ksft_exit_fail_msg() will call exit() at
the point in the pipeline that the warning is emitted because inlining has
not occurred, so it assumes control flow will resume normally after
ksft_exit_fail_msg() is called.
Make it clear to clang that all of the functions that call exit()
unconditionally in kselftest.h are noreturn transitively by marking them
explicitly with '__attribute__((__noreturn__))', which clears up the
warning above and any future warnings that may appear for the same reason.
Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Reported-by: John Stultz <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/20240411-mark-kselftest-exit-funcs-noreturn-v1-1-b027c948f586@kernel.org
Closes: https://lore.kernel.org/all/[email protected]/
|
|
After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement
check_timer_distribution()") the following warning occurs when building
with an older gcc:
posix_timers.c:250:2: warning: format not a string literal and no format arguments [-Wformat-security]
250 | ksft_print_msg(errmsg);
| ^~~~~~~~~~~~~~
Fix this up by changing it to ksft_print_msg("%s", errmsg)
Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Justin Stitt <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
The "close handle without consuming VPD" testcase has inconsistent
results because it fails to initialize the location code object it
passes to ioctl() to create a VPD handle. Initialize the location code
to the empty string as intended.
Signed-off-by: Nathan Lynch <[email protected]>
Fixes: 9118c5d32bdd ("powerpc/selftests: Add test for papr-vpd")
Reported-by: Geetika Moolchandani <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Fix index of Clear Event Record handles in cxl_clear_event_record()
- Fix use before init of map->reg_type in cxl_decode_regblock()
- Fix initialization of mbox_cmd.size_out in cxl_mem_get_records_log()
- Fix CXL path access_coordinate computation:
- Remove unneded check of iter in loop
- Fix of retrieving of access_coordinate in PCI topology walk
- Fix of incorrect region access_coordinate data calculation
- Consolidate of access_coordinates attached to downstream port
context
- Add check to validate access_coordinate validity to prevent
incorrect data being exposed via sysfs
* tag 'cxl-fixes-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Add checks to access_coordinate calculation to fail missing data
cxl: Consolidate dport access_coordinate ->hb_coord and ->sw_coord into ->coord
cxl: Fix incorrect region perf data calculation
cxl: Fix retrieving of access_coordinates in PCIe path
cxl: Remove checking of iter in cxl_endpoint_get_perf_coordinates()
cxl/core: Fix initialization of mbox_cmd.size_out in get event
cxl/core/regs: Fix usage of map->reg_type in cxl_decode_regblock() before assigned
cxl/mem: Fix for the index of Clear Event Record Handle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Some cosmetic changes (Erni Sri Satya Vennela, Li Zhijian)
- Introduce hv_numa_node_to_pxm_info() (Nuno Das Neves)
- Fix KVP daemon to handle IPv4 and IPv6 combination for keyfile format
(Shradha Gupta)
- Avoid freeing decrypted memory in a confidential VM (Rick Edgecombe
and Michael Kelley)
* tag 'hyperv-fixes-signed-20240411' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted
uio_hv_generic: Don't free decrypted memory
hv_netvsc: Don't free decrypted memory
Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl
Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails
hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for keyfile format
hv: vmbus: Convert sprintf() family to sysfs_emit() family
mshyperv: Introduce hv_numa_node_to_pxm_info()
x86/hyperv: Cosmetic changes for hv_apic.c
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/unix/garbage.c
47d8ac011fe1 ("af_unix: Fix garbage collector racing against connect()")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
faa12ca24558 ("bnxt_en: Reset PTP tx_avail after possible firmware reset")
b3d0083caf9a ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
7ac10c7d728d ("bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init()")
194fad5b2781 ("bnxt_en: Refactor bnxt_rdma_aux_device_init/uninit functions")
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
958f56e48385 ("net/mlx5e: Un-expose functions in en.h")
49e6c9387051 ("net/mlx5e: RSS, Block XOR hash with over 128 channels")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Extend vmx_dirty_log_test to include accesses made by L2 when EPT is
disabled.
This commit adds explicit coverage of a bug caught by syzkaller, where
the TDP MMU would clear D-bits instead of write-protecting SPTEs being
used to map an L2, which only happens when L1 does not enable EPT,
causing writes made by L2 to not be reflected in the dirty log when PML
is enabled:
$ ./vmx_dirty_log_test
Nested EPT: disabled
==== Test Assertion Failure ====
x86_64/vmx_dirty_log_test.c:151: test_bit(0, bmap)
pid=72052 tid=72052 errno=4 - Interrupted system call
(stack trace empty)
Page 0 incorrectly reported clean
Opportunistically replace the volatile casts with {READ,WRITE}_ONCE().
Link: https://lore.kernel.org/kvm/[email protected]/
Signed-off-by: David Matlack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
This patch extracts the code to send and receive data into a new
helper named send_recv_data() in network_helpers.c and export it
in network_helpers.h.
This helper will be used for MPTCP BPF selftests.
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/5231103be91fadcce3674a589542c63b6a5eedd4.1712813933.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Avoid setting total_bytes and stop as global variables, this patch adds
a new struct named send_recv_arg to pass arguments between threads. Put
these two variables together with fd into this struct and pass it to
server thread, so that server thread can access these two variables without
setting them as global ones.
Signed-off-by: Geliang Tang <[email protected]>
Link: https://lore.kernel.org/r/ca1dd703b796f6810985418373e750f7068b4186.1712813933.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
To pick up the changes from:
fb091ff39479 ("arm64: Subscribe Microsoft Azure Cobalt 100 to ARM Neoverse N2 errata")
This should address these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
To pick up the changes from:
cb4ede926134 ("riscv: Avoid code duplication with generic bitops implementation")
This should address these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/asm-generic/bitops/__fls.h include/asm-generic/bitops/__fls.h
diff -u tools/include/asm-generic/bitops/fls.h include/asm-generic/bitops/fls.h
Cc: Arnd Bergmann <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
To pick up the changes from:
8076fcde016c ("x86/rfds: Mitigate Register File Data Sampling (RFDS)")
d7b69b590bc9 ("x86/sev: Dump SEV_STATUS")
cd6df3f378f6 ("x86/cpu: Add MSR numbers for FRED configuration")
216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
This should address these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
To pick up the changes from:
0cbca1bf44a0 ("x86: irq: unconditionally define KVM interrupt vectors")
This should address these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/irq_vectors.h arch/x86/include/asm/irq_vectors.h
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
To pick up the changes from:
598c2fafc06f ("perf/x86/amd/lbr: Use freeze based on availability")
7f274e609f3d ("x86/cpufeatures: Add new word for scattered features")
This should address these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
diff -u tools/arch/x86/include/asm/required-features.h arch/x86/include/asm/required-features.h
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
To pick up the changes from:
85df6b5a6658 ("ALSA: pcm: clarify and fix default msbits value for all formats")
This should be used to beautify sound syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
To pick up the changes from:
6bda055d6258 ("KVM: define __KVM_HAVE_GUEST_DEBUG unconditionally")
5d9cb71642db ("KVM: arm64: move ARM-specific defines to uapi/asm/kvm.h")
71cd774ad2f9 ("KVM: s390: move s390-specific structs to uapi/asm/kvm.h")
d750951c9ed7 ("KVM: powerpc: move powerpc-specific structs to uapi/asm/kvm.h")
bcac0477277e ("KVM: x86: move x86-specific structs to uapi/asm/kvm.h")
c0a411904e15 ("KVM: remove more traces of device assignment UAPI")
f3c80061c0d3 ("KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP")
That should be used to beautify the KVM arguments and it addresses these
tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Paolo Bonzini <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
To pick up the changes from:
41bcbe59c3b3f ("fs: FS_IOC_GETUUID")
ae8c511757304 ("fs: add FS_IOC_GETFSSYSFSPATH")
73fa7547c70b3 ("vfs: add RWF_NOAPPEND flag for pwritev2")
This should be used to beautify fs syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Christian Brauner <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|