| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The test has been failing for some time when two separate runs of
perf benchmarks are recorded for cycles events and their counts are
compared, while once the recording was done with option --bpf-counters
and once without it. It is expected that the count of the samples
should be within a certain range, firstly the difference was set to be
within 10%, which was then later raised to 20%. However, the test case
keeps failing on certain architectures as recording the provided
benchmark can produce completely different counts based on the
current load of the system.
Sampling two separate runs on intel-eaglestream-spr-13 of "perf stat
--no-big-num -e cycles -- perf bench sched messaging -g 1 -l 100 -t":
Performance counter stats for 'perf bench sched messaging -g 1 -l 100 -t':
396782898 cycles
0.010051983 seconds time elapsed
0.008664000 seconds user
0.097058000 seconds sys
Performance counter stats for 'perf bench sched messaging -g 1 -l 100 -t':
1431133032 cycles
0.021803714 seconds time elapsed
0.023377000 seconds user
0.349918000 seconds sys
, which is ranging from 400mil to 1400mil samples.
Instead of recording the cycles use instructions event, which provides
more stable values. At the same time change the tested workload to one
of the provided testing workloads by perf that is not based on a
scheduler, which can provide another dependency on the current load.
Sampling instructions event with the new workload provide much more
stable results on intel-eaglestream-spr-13 of "perf stat --no-big-num
-e instructions -- perf test -w brstack":
Performance counter stats for 'perf test -w brstack':
64584494 instructions
0.009173945 seconds time elapsed
0.007262000 seconds user
0.002071000 seconds sys
Performance counter stats for 'perf test -w brstack':
64672669 instructions
0.008888135 seconds time elapsed
0.005018000 seconds user
0.004018000 seconds sys
Signed-off-by: Veronika Molnarova <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The python build now depends on libraries and doesn't use
python-ext-sources except for the util/python.c dependency. Switch to
just directly depending on that file and util/setup.py. This allows
the removal of python-ext-sources.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: James Clark <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Cc: Ze Gao <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: John Garry <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: Björn Roy Baron <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Paul Walmsley <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
setup.py was building most perf sources causing setup.py to mimic the
Makefile logic as well as flex/bison code to be stubbed out, due to
complexity building. By using libraries fewer functions are stubbed
out, the build is faster and the Makefile logic is reused which should
simplify updating. The libraries are passed through LDFLAGS to avoid
complexity in python.
Force the -fPIC flag for libbpf.a to ensure it is suitable for linking
into the perf python module.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: James Clark <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Cc: Ze Gao <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: John Garry <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: Björn Roy Baron <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Paul Walmsley <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Make the util directory into its own library. This is done to avoid
compiling code twice, once for the perf tool and once for the perf
python module. For convenience:
arch/common.c
scripts/perl/Perf-Trace-Util/Context.c
scripts/python/Perf-Trace-Util/Context.c
are made part of this library.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: James Clark <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Cc: Ze Gao <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: John Garry <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: Björn Roy Baron <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Paul Walmsley <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Make the benchmark code into a library so it may be linked against
things like the python module to avoid compiling code twice.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: James Clark <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Cc: Ze Gao <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: John Garry <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: Björn Roy Baron <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Paul Walmsley <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Make the tests code its own library. This is done to avoid compiling
code twice, once for the perf tool and once for the perf python
module.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: James Clark <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Cc: Ze Gao <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: John Garry <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: Björn Roy Baron <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Paul Walmsley <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Make pmu-events into a library so it may be linked against things like
the python module and not built from source.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: James Clark <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Cc: Ze Gao <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: John Garry <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: Björn Roy Baron <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Paul Walmsley <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Make the ui code its own library. This is done to avoid compiling code
twice, once for the perf tool and once for the perf python module.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: James Clark <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Cc: Ze Gao <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: John Garry <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: Björn Roy Baron <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Paul Walmsley <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Fix some excessively long lines by deploying '\'.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: James Clark <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Cc: Ze Gao <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: John Garry <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: Björn Roy Baron <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Paul Walmsley <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The KVM RISC-V allows Zcmop extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Acked-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The KVM RISC-V allows Zca, Zcf, Zcd and Zcb extensions for Guest/VM so
add these extensions to get-reg-list test.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Acked-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The KVM RISC-V allows Zimop extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Acked-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
'perf kvm stat report/record' generates a statistical analysis of KVM
events and can be used to analyze guest exit reasons.
"report" reports statistical analysis of guest exit events.
To record kvm events on the host:
# perf kvm stat record -a
To report kvm VM EXIT events:
# perf kvm stat report --event=vmexit
Signed-off-by: Shenlin Liang <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Since interleave capability is not verified, if the interleave
capability of a target does not match the region need, committing decoder
should have failed at the device end.
In order to checkout this error as quickly as possible, driver needs
to check the interleave capability of target during attaching it to
region.
Per CXL specification r3.1(8.2.4.20.1 CXL HDM Decoder Capability Register),
bits 11 and 12 indicate the capability to establish interleaving in 3, 6,
12 and 16 ways. If these bits are not set, the target cannot be attached to
a region utilizing such interleave ways.
Additionally, bits 8 and 9 represent the capability of the bits used for
interleaving in the address, Linux tracks this in the cxl_port
interleave_mask.
Per CXL specification r3.1(8.2.4.20.13 Decoder Protection):
eIW means encoded Interleave Ways.
eIG means encoded Interleave Granularity.
in HPA:
if eIW is 0 or 8 (interleave ways: 1, 3), all the bits of HPA are used,
the interleave bits are none, the following check is ignored.
if eIW is less than 8 (interleave ways: 2, 4, 8, 16), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW + 8 - 1.
if eIW is greater than 8 (interleave ways: 6, 12), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW - 1.
if the interleave mask is insufficient to cover the required interleave
bits, the target cannot be attached to the region.
Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders")
Signed-off-by: Yao Xingtao <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
Guilherme reported a crash in perf mem record. It's because the
perf_mem_event->name was NULL on his machine. It should just return
a NULL string when it has no format string in the name.
The backtrace at the crash is below:
Program received signal SIGSEGV, Segmentation fault.
__strchrnul_avx2 () at ../sysdeps/x86_64/multiarch/strchr-avx2.S:67
67 vmovdqu (%rdi), %ymm2
(gdb) bt
#0 __strchrnul_avx2 () at ../sysdeps/x86_64/multiarch/strchr-avx2.S:67
#1 0x00007ffff6c982de in __find_specmb (format=0x0) at printf-parse.h:82
#2 __printf_buffer (buf=buf@entry=0x7fffffffc760, format=format@entry=0x0, ap=ap@entry=0x7fffffffc880,
mode_flags=mode_flags@entry=0) at vfprintf-internal.c:649
#3 0x00007ffff6cb7840 in __vsnprintf_internal (string=<optimized out>, maxlen=<optimized out>, format=0x0,
args=0x7fffffffc880, mode_flags=mode_flags@entry=0) at vsnprintf.c:96
#4 0x00007ffff6cb787f in ___vsnprintf (string=<optimized out>, maxlen=<optimized out>, format=<optimized out>,
args=<optimized out>) at vsnprintf.c:103
#5 0x00005555557b9391 in scnprintf (buf=0x555555fe9320 <mem_loads_name> "", size=100, fmt=0x0)
at ../lib/vsprintf.c:21
#6 0x00005555557b74c3 in perf_pmu__mem_events_name (i=0, pmu=0x555556832180) at util/mem-events.c:106
#7 0x00005555557b7ab9 in perf_mem_events__record_args (rec_argv=0x55555684c000, argv_nr=0x7fffffffca20)
at util/mem-events.c:252
#8 0x00005555555e370d in __cmd_record (argc=3, argv=0x7fffffffd760, mem=0x7fffffffcd80) at builtin-mem.c:156
#9 0x00005555555e49c4 in cmd_mem (argc=4, argv=0x7fffffffd760) at builtin-mem.c:514
#10 0x000055555569716c in run_builtin (p=0x555555fcde80 <commands+672>, argc=8, argv=0x7fffffffd760) at perf.c:349
#11 0x0000555555697402 in handle_internal_command (argc=8, argv=0x7fffffffd760) at perf.c:402
#12 0x0000555555697560 in run_argv (argcp=0x7fffffffd59c, argv=0x7fffffffd590) at perf.c:446
#13 0x00005555556978a6 in main (argc=8, argv=0x7fffffffd760) at perf.c:562
Reported-by: Guilherme Amadio <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Closes: https://lore.kernel.org/linux-perf-users/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
A compiler warning on the second argument of bsearch() should not be
NULL, but there's a case we might pass it. Let's return early if we
don't have any DSOs to search in __dsos__find_by_longname_id().
util/dsos.c:184:8: runtime error: null pointer passed as argument 2, which is declared to never be null
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In dso__load(), it checks if the dso is a kernel module by looking the
symtab type. Actually dso has 'is_kmod' field to check that easily and
dso__set_module_info() set the symtab type and the is_kmod bit. So it
should have the same result to check the is_kmod bit.
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It's expected that both hist entries are in the same hists when
comparing two. But the current code in the function checks one without
dso sort key and other with the key. This would make the condition true
in any case.
I guess the intention of the original commit was to add '!' for the
right side too. But as it should be the same, let's just remove it.
Fixes: 69849fc5d2119 ("perf hists: Move sort__has_dso into struct perf_hpp_list")
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In the previous loop, all the members in the aliases[j-1] have been freed
and set to NULL. But in this loop, the function pmu_alias_is_duplicate()
compares the aliases[j] with the aliases[j-1] that has already been
disposed, so the function will always return false and duplicate aliases
will never be discarded.
If we find duplicate aliases, it skips the zfree aliases[j], which is
accompanied by a memory leak.
We can use the next aliases[j+1] to theck for duplicate aliases to
fixes the aliases NULL pointer dereference, then goto zfree code snippet
to release it.
After patch testing:
$ perf list --unit=hisi_sicl,cpa pmu
uncore cpa:
cpa_p0_rd_dat_32b
[Number of read ops transmitted by the P0 port which size is 32 bytes.
Unit: hisi_sicl,cpa]
cpa_p0_rd_dat_64b
[Number of read ops transmitted by the P0 port which size is 64 bytes.
Unit: hisi_sicl,cpa]
Fixes: c3245d2093c1 ("perf pmu: Abstract alias/event struct")
Signed-off-by: Junhao He <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add malloc() failure handling in unread_unwind_spec_debug_frame().
This make caller find_proc_info() works well when the allocation failure.
Signed-off-by: Yunseong Kim <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Austin Kim <[email protected]>
Cc: [email protected]
Cc: Ze Gao <[email protected]>
Cc: Leo Yan <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This patch resolve following warning.
tools/perf/util/evsel.c:1620:9: error: result of comparison of constant
-1 with expression of type 'char' is always false
-Werror,-Wtautological-constant-out-of-range-compare
1620 | if (c == -1)
| ~ ^ ~~
Signed-off-by: Yunseong Kim <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Austin Kim <[email protected]>
Cc: [email protected]
Cc: Ze Gao <[email protected]>
Cc: Leo Yan <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When using perf timehist, sch delay is only computed for a waking task,
not for a pre empted task. This patches changes sch delay to account for
both. This makes sense as testing scheduling policy need to consider the
effect of scheduling delay globally, not only for waking tasks.
Example of `perf timehist` report before the patch for `stress` task
competing with each other.
First column is wait time, second column sch delay, third column
runtime.
1.492060 [0000] s stress[81] 1.999 0.000 2.000 R next: stress[83]
1.494060 [0000] s stress[83] 2.000 0.000 2.000 R next: stress[81]
1.496060 [0000] s stress[81] 2.000 0.000 2.000 R next: stress[83]
1.498060 [0000] s stress[83] 2.000 0.000 1.999 R next: stress[81]
After the patch, it looks like this (note that all wait time is not zero
anymore):
1.492060 [0000] s stress[81] 1.999 1.999 2.000 R next: stress[83]
1.494060 [0000] s stress[83] 2.000 2.000 2.000 R next: stress[81]
1.496060 [0000] s stress[81] 2.000 2.000 2.000 R next: stress[83]
1.498060 [0000] s stress[83] 2.000 2.000 1.999 R next: stress[81]
Signed-off-by: Fernand Sieber <[email protected]>
Reviewed-by: Madadi Vineeth Reddy <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add samples of APX and other new instructions to the 'x86 instruction
decoder - new instructions' test.
Note the test is only available if the perf tool has been built with
EXTRA_TESTS=1.
Example:
$ make EXTRA_TESTS=1 -C tools/perf
$ tools/perf/perf test -F -v 'new ins' |& grep -i 'jmpabs\|popp\|pushp'
Decoded ok: d5 00 a1 ef cd ab 90 78 56 34 12 jmpabs $0x1234567890abcdef
Decoded ok: d5 08 53 pushp %rbx
Decoded ok: d5 18 50 pushp %r16
Decoded ok: d5 19 57 pushp %r31
Decoded ok: d5 19 5f popp %r31
Decoded ok: d5 18 58 popp %r16
Decoded ok: d5 08 5b popp %rbx
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Chang S. Bae <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Nikolay Borisov <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
JMPABS is 64-bit absolute direct jump instruction, encoded with a mandatory
REX2 prefix. JMPABS is designed to be used in the procedure linkage table
(PLT) to replace indirect jumps, because it has better performance. In that
case the jump target will be amended at run time. To enable Intel PT to
follow the code, a TIP packet is always emitted when JMPABS is traced under
Intel PT.
Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.
Decode JMPABS as an indirect jump, because it has an associated TIP packet
the same as an indirect jump and the control flow should follow the TIP
packet payload, and not assume it is the same as the on-file object code
JMPABS target address.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Chang S. Bae <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Nikolay Borisov <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Test "perf probe of function from different CU" only checks if the perf
command has failed and doesn't test the --funcs output. In the issue
reported in the previous commit, the garbage output of the --funcs
command was being ignored by the test when it could have been caught.
The script first makes use of --funcs option with the perf probe command
to check if the function "foo" exists in the testfile before adding a
probe to it in the next command. The output of probe...--funcs command
is redirected to stdout, therefore, add '| grep "foo"' to validate the
result.
Signed-off-by: Chaitanya S Prakash <[email protected]>
Reviewed-by: Masami Hiramatsu (Google) <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
":=" usage
perf test "perf script tests" fails as below in systems
with python 3.6
File "/home/athira/linux/tools/perf/tests/shell/../../scripts/python/parallel-perf.py", line 442
if line := p.stdout.readline():
^
SyntaxError: invalid syntax
--- Cleaning up ---
---- end(-1) ----
92: perf script tests: FAILED!
This happens because ":=" is a new syntax that assigns values
to variables as part of a larger expression. This is introduced
from python 3.8 and hence fails in setup with python 3.6
Address this by splitting the large expression and check the
value in two steps:
Previous line: if line := p.stdout.readline():
Current change:
line = p.stdout.readline()
if line:
With patch
./perf test "perf script tests"
93: perf script tests: Ok
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
pattern /tmp/perf-%d.map
commit 80d496be89ed ("perf report: Add support for profiling JIT
generated code") added support for profiling JIT generated code.
This patch handles dso's of form "/tmp/perf-$PID.map".
Some of the references doesn't check exactly for same pattern.
some uses "if (!strncmp(dso_name, "/tmp/perf-", 10))". Fix
this by using helper function perf_pid_map_tid and
is_perf_pid_map_name which looks for proper pattern of
form: "/tmp/perf-$PID.map" for these checks.
Signed-off-by: Athira Rajeev <[email protected]>
Reviewed-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Perf test for perf probe of function from different CU fails
as below:
./perf test -vv "test perf probe of function from different CU"
116: test perf probe of function from different CU:
--- start ---
test child forked, pid 2679
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.Msa7iy89bx/testfile
Error: Failed to add events.
--- Cleaning up ---
"foo" does not hit any event.
Error: Failed to delete events.
---- end(-1) ----
116: test perf probe of function from different CU : FAILED!
The test does below to probe function "foo" :
# gcc -g -Og -flto -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
# gcc -g -Og -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# gcc -g -Og -o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# ./perf probe -x /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile foo
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
Error: Failed to add events.
Perf probe fails to find symbol foo in the executable placed in
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7
Simple reproduce:
# mktemp -d /tmp/perf-checkXXXXXXXXXX
/tmp/perf-checkcWpuLRQI8j
# gcc -g -o test test.c
# cp test /tmp/perf-checkcWpuLRQI8j/
# nm /tmp/perf-checkcWpuLRQI8j/test | grep foo
00000000100006bc T foo
# ./perf probe -x /tmp/perf-checkcWpuLRQI8j/test foo
Failed to find symbol foo in /tmp/perf-checkcWpuLRQI8j/test
Error: Failed to add events.
But it works with any files like /tmp/perf/test. Only for
patterns with "/tmp/perf-", this fails.
Further debugging, commit 80d496be89ed ("perf report: Add support
for profiling JIT generated code") added support for profiling JIT
generated code. This patch handles dso's of form
"/tmp/perf-$PID.map" .
The check used "if (strncmp(self->name, "/tmp/perf-", 10) == 0)"
to match "/tmp/perf-$PID.map". With this commit, any dso in
/tmp/perf- folder will be considered separately for processing
(not only JIT created map files ). Fix this by changing the
string pattern to check for "/tmp/perf-%d.map". Add a helper
function is_perf_pid_map_name to do this check. In "struct dso",
dso->long_name holds the long name of the dso file. Since the
/tmp/perf-$PID.map check uses the complete name, use dso___long_name for
the string name.
With the fix,
# ./perf test "test perf probe of function from different CU"
117: test perf probe of function from different CU : Ok
Fixes: 56cbeacf1435 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()")
Signed-off-by: Athira Rajeev <[email protected]>
Reviewed-by: Chaitanya S Prakash <[email protected]>
Reviewed-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It seems that there is no definition for config IP_GRE, and it is not a
dependency of other configs, so remove it.
linux$ find -name Kconfig | xargs grep "IP_GRE"
<-- nothing
There is a IPV6_GRE config defined in net/ipv6/Kconfig. It only depends
on NET_IPGRE_DEMUX but not IP_GRE.
Signed-off-by: Yujie Liu <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Userspace builds of the radix-tree testing suite fails because of commit
test_maple_tree: add the missing MODULE_DESCRIPTION() macro. Add the
proper defines to tools/testing/radix-tree/maple.c and
tools/testing/radix-tree/xarray.c so MODULE_DESCRIPTION has a definition.
This allows the build to succeed.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 9f8090e8c4d1 ("test_maple_tree: add the missing MODULE_DESCRIPTION() macro")
Signed-off-by: Sidhartha Kumar <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Cc: Jeff Johnson <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
/proc/${pid}/status got Kthread field recently.
Test that userspace program is not reported as kernel thread.
Test that kernel thread is reported as kernel thread.
Use kthreadd with pid 2 for this.
Link: https://lkml.kernel.org/r/818c4c41-8668-4566-97a9-7254abf819ee@p183
Signed-off-by: Alexey Dobriyan <[email protected]>
Cc: Chunguang Wu <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Since cond_resched() is not called in userspace, remove the redundant code
in userspace's list_sort() implementation. This change eliminates the
unused 'count' variable and the associated logic for invoking cmp()
periodically, which was intended to trigger cond_resched() in kernel
space.
The removed code includes:
- Declaration and increment of the 'count' variable.
- Conditional invocation of cmp() based on 'count'.
This cleanup simplifies merge_final(), avoids unnecessary overhead, and
has no impact on the functionality of list_sort() in userspace.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kuan-Wei Chiu <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Ching-Chun (Jim) Huang <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add several new test cases which assert corner cases on the eventfd
mechanism, for example, the supplied buffer is less than 8 bytes,
attempting to write a value that is too large, etc.
./eventfd_test
# Starting 9 tests from 1 test cases.
# RUN global.eventfd_check_flag_rdwr ...
# OK global.eventfd_check_flag_rdwr
ok 1 global.eventfd_check_flag_rdwr
# RUN global.eventfd_check_flag_cloexec ...
# OK global.eventfd_check_flag_cloexec
ok 2 global.eventfd_check_flag_cloexec
# RUN global.eventfd_check_flag_nonblock ...
# OK global.eventfd_check_flag_nonblock
ok 3 global.eventfd_check_flag_nonblock
# RUN global.eventfd_chek_flag_cloexec_and_nonblock ...
# OK global.eventfd_chek_flag_cloexec_and_nonblock
ok 4 global.eventfd_chek_flag_cloexec_and_nonblock
# RUN global.eventfd_check_flag_semaphore ...
# OK global.eventfd_check_flag_semaphore
ok 5 global.eventfd_check_flag_semaphore
# RUN global.eventfd_check_write ...
# OK global.eventfd_check_write
ok 6 global.eventfd_check_write
# RUN global.eventfd_check_read ...
# OK global.eventfd_check_read
ok 7 global.eventfd_check_read
# RUN global.eventfd_check_read_with_nonsemaphore ...
# OK global.eventfd_check_read_with_nonsemaphore
ok 8 global.eventfd_check_read_with_nonsemaphore
# RUN global.eventfd_check_read_with_semaphore ...
# OK global.eventfd_check_read_with_semaphore
ok 9 global.eventfd_check_read_with_semaphore
# PASSED: 9 / 9 tests passed.
# Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Wen Yang <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Dave Young <[email protected]>
Cc: Tim Bird <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When building with clang, via:
make LLVM=1 -C tools/testing/selftest
...clang warns about several cases of using a signed integer for the
priority argument to mq_receive(3), which expects an unsigned int.
Fix this by declaring the type as unsigned int in all cases.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: John Hubbard <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: Ryan Roberts <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Muhammad Usama Anjum <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Valentin Obst <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
After calling fork() in test_prctl_fork_exec(), the global variable
ksm_full_scans_fd is initialized to 0 in the child process upon entering
the main function of ./ksm_functional_tests.
In the function call chain test_child_ksm() -> __mmap_and_merge_range ->
ksm_merge-> ksm_get_full_scans, start_scans = ksm_get_full_scans() will
return an error. Therefore, the value of ksm_full_scans_fd needs to be
initialized before calling test_child_ksm in the child process.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: aigourensheng <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add a set of tests to validate that stack traces captured from or in the
presence of active uprobes and uretprobes are valid and complete.
For this we use BPF program that are installed either on entry or exit
of user function, plus deep-nested USDT. One of target funtions
(target_1) is recursive to generate two different entries in the stack
trace for the same uprobe/uretprobe, testing potential edge conditions.
If there is no fixes, we get something like this for one of the scenarios:
caller: 0x758fff - 0x7595ab
target_1: 0x758fd5 - 0x758fff
target_2: 0x758fca - 0x758fd5
target_3: 0x758fbf - 0x758fca
target_4: 0x758fb3 - 0x758fbf
ENTRY #0: 0x758fb3 (in target_4)
ENTRY #1: 0x758fd3 (in target_2)
ENTRY #2: 0x758ffd (in target_1)
ENTRY #3: 0x7fffffffe000
ENTRY #4: 0x7fffffffe000
ENTRY #5: 0x6f8f39
ENTRY #6: 0x6fa6f0
ENTRY #7: 0x7f403f229590
Entry #3 and #4 (0x7fffffffe000) are uretprobe trampoline addresses
which obscure actual target_1 and another target_1 invocations. Also
note that between entry #0 and entry #1 we are missing an entry for
target_3.
With fixes, we get desired full stack traces:
caller: 0x758fff - 0x7595ab
target_1: 0x758fd5 - 0x758fff
target_2: 0x758fca - 0x758fd5
target_3: 0x758fbf - 0x758fca
target_4: 0x758fb3 - 0x758fbf
ENTRY #0: 0x758fb7 (in target_4)
ENTRY #1: 0x758fc8 (in target_3)
ENTRY #2: 0x758fd3 (in target_2)
ENTRY #3: 0x758ffd (in target_1)
ENTRY #4: 0x758ff3 (in target_1)
ENTRY #5: 0x75922c (in caller)
ENTRY #6: 0x6f8f39
ENTRY #7: 0x6fa6f0
ENTRY #8: 0x7f986adc4cd0
Now there is a logical and complete sequence of function calls.
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-24
We've added 12 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 412 insertions(+), 16 deletions(-).
The main changes are:
1) Fix a BPF verifier issue validating may_goto with a negative offset,
from Alexei Starovoitov.
2) Fix a BPF verifier validation bug with may_goto combined with jump to
the first instruction, also from Alexei Starovoitov.
3) Fix a bug with overrunning reservations in BPF ring buffer,
from Daniel Borkmann.
4) Fix a bug in BPF verifier due to missing proper var_off setting related
to movsx instruction, from Yonghong Song.
5) Silence unnecessary syzkaller-triggered warning in __xdp_reg_mem_model(),
from Daniil Dulov.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: Remove WARN() from __xdp_reg_mem_model()
selftests/bpf: Add tests for may_goto with negative offset.
bpf: Fix may_goto with negative offset.
selftests/bpf: Add more ring buffer test coverage
bpf: Fix overrunning reservations in ringbuf
selftests/bpf: Tests with may_goto and jumps to the 1st insn
bpf: Fix the corner case with may_goto and jump to the 1st insn.
bpf: Update BPF LSM maintainer list
bpf: Fix remap of arena.
selftests/bpf: Add a few tests to cover
bpf: Add missed var_off setting in coerce_subreg_to_size_sx()
bpf: Add missed var_off setting in set_sext32_default_val()
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The 2 second sleep can cause the test to fail on very slow network file
systems because Perf ends up being killed before it finishes starting
up.
Fix it by making the leafloop workload end after a fixed time like the
other workloads so there is no need to kill it after 2 seconds.
Also remove the 1 second start sampling delay because it is similarly
fragile. Instead, search through all samples for a matching one, rather
than just checking the first sample and hoping it's in the right place.
Fixes: cd6382d82752 ("perf test arm64: Test unwinding using fame-pointer (fp) mode")
Signed-off-by: James Clark <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Spoorthy S <[email protected]>
Cc: Kajol Jain <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
These seem useless since we use the SLUB_RED_INACTIVE and SLUB_RED_ACTIVE,
so just delete them, no functional change.
Reviewed-by: Vlastimil Babka <[email protected]>
Signed-off-by: Chengming Zhou <[email protected]>
Reviewed-by: Christoph Lameter (Ampere) <[email protected]>
Signed-off-by: Vlastimil Babka <[email protected]>
|
|
When upgrading to libbpf 1.3 we noticed a big performance hit while
loading programs using CORE on non base-BTF symbols. This was tracked
down to the new BTF sanity check logic. The issue is the base BTF
definitions are checked first for the base BTF and then again for every
module BTF.
Loading 5 dummy programs (using libbpf-rs) that are using CORE on a
non-base BTF symbol on my system:
- Before this fix: 3s.
- With this fix: 0.1s.
Fix this by only checking the types starting at the BTF start id. This
should ensure the base BTF is still checked as expected but only once
(btf->start_id == 1 when creating the base BTF), and then only
additional types are checked for each module BTF.
Fixes: 3903802bb99a ("libbpf: Add basic BTF sanity validation")
Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add few tests with may_goto and negative offset.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add test coverage for reservations beyond the ring buffer size in order
to validate that bpf_ringbuf_reserve() rejects the request with NULL, all
other ring buffer tests keep passing as well:
# ./vmtest.sh -- ./test_progs -t ringbuf
[...]
./test_progs -t ringbuf
[ 1.165434] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.165825] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
[ 1.284001] tsc: Refined TSC clocksource calibration: 3407.982 MHz
[ 1.286871] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc34e357, max_idle_ns: 440795379773 ns
[ 1.289555] clocksource: Switched to clocksource tsc
#274/1 ringbuf/ringbuf:OK
#274/2 ringbuf/ringbuf_n:OK
#274/3 ringbuf/ringbuf_map_key:OK
#274/4 ringbuf/ringbuf_write:OK
#274 ringbuf:OK
#275 ringbuf_multi:OK
[...]
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
[ Test fixups for getting BPF CI back to work ]
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
commit 606af8293cd8 ("KVM: selftests: arm64: Test vCPU-scoped feature ID
registers") intended to test that MPIDR_EL1 is unchanged across vCPU
reset but failed at actually doing so.
Add the missing assertion.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
|
|
When either of these have a shorter version, like 1.8, the expression
that computes the version has a syntax error that can be seen in the
output of make:
expr: syntax error: missing argument after +
Link: https://bugs.gentoo.org/917559
Reported-by: Peter Volkov <[email protected]>
Signed-off-by: Guilherme Amadio <[email protected]>
Reviewed-by: Leo Yan <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Needed to add required include directories for the feature detection
to succeed. The header tracefs.h is installed either into the include
directory /usr/include/tracefs/tracefs.h when using the Makefile, or
into /usr/include/libtracefs/tracefs.h when using meson to build
libtracefs. The header tracefs.h uses #include <event-parse.h> from
libtraceevent, so pkg-config needs to pick the correct include directory
for libtracefs and add the one for libtraceevent to succeed.
Note that in baa2ca59ec1e31ccbe3f24ff0368152b36f68720 the variable
LIBTRACEEVENT_DIR was introduced, and now the method to compile against
non-standard locations requires PKG_CONFIG_PATH to be set instead, which
works for both libtraceevent and libtracefs.
Signed-off-by: Guilherme Amadio <[email protected]>
Reviewed-by: Leo Yan <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When PMUs have a cpu map in the 'cpus' or 'cpumask' file, perf will
try to open events on those CPUs. ARM doesn't remove offline CPUs
meaning taking a CPU offline will cause perf commands to fail unless a
CPU map is passed on the command line.
More context in:
https://lore.kernel.org/lkml/[email protected]/
Reported-by: Yicong Yang <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Yicong Yang <[email protected]>
Tested-by: Leo Yan <[email protected]>
Cc: James Clark <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: John Garry <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
add simple kfuncs to create/destroy a context type to bpf_testmod,
register them and add a kfunc_call test to use them. This provides
test coverage for registration of dtor kfuncs from modules.
By transferring the context pointer to a map value as a __kptr
we also trigger the map-based dtor cleanup logic, improving test
coverage.
Suggested-by: Eduard Zingerman <[email protected]>
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Share relocation implementation with the kernel. As part of this,
we also need the type/string iteration functions so also share
btf_iter.c file. Relocation code in kernel and userspace is identical
save for the impementation of the reparenting of split BTF to the
relocated base BTF and retrieval of the BTF header from "struct btf";
these small functions need separate user-space and kernel implementations
for the separate "struct btf"s they operate upon.
One other wrinkle on the kernel side is we have to map .BTF.ids in
modules as they were generated with the type ids used at BTF encoding
time. btf_relocate() optionally returns an array mapping from old BTF
ids to relocated ids, so we use that to fix up these references where
needed for kfuncs.
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This will allow it to be shared with the kernel. No functional change.
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|