aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2023-08-09selftests: forwarding: hw_stats_l3_gre: Skip when using veth pairsIdo Schimmel1-0/+2
Layer 3 hardware stats cannot be used when the underlying interfaces are veth pairs, resulting in failures: # ./hw_stats_l3_gre.sh TEST: ping gre flat [ OK ] TEST: Test rx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 TEST: Test tx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 Fix by skipping the test when used with veth pairs. Fixes: 813f97a26860 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: ethtool_extended_state: Skip when using veth pairsIdo Schimmel1-0/+2
Ethtool extended state cannot be tested with veth pairs, resulting in failures: # ./ethtool_extended_state.sh TEST: Autoneg, No partner detected [FAIL] Expected "Autoneg", got "Link detected: no" [...] Fix by skipping the test when used with veth pairs. Fixes: 7d10bcce98cd ("selftests: forwarding: Add tests for ethtool extended state") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: ethtool: Skip when using veth pairsIdo Schimmel1-0/+2
Auto-negotiation cannot be tested with veth pairs, resulting in failures: # ./ethtool.sh TEST: force of same speed autoneg off [FAIL] error in configuration. swp1 speed Not autoneg off [...] Fix by skipping the test when used with veth pairs. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: Add a helper to skip test when using veth pairsIdo Schimmel1-0/+11
A handful of tests require physical loopbacks to be used instead of veth pairs. Add a helper that these tests will invoke in order to be skipped when executed with veth pairs. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: Set default IPv6 traceroute utilityIdo Schimmel2-0/+3
The test uses the 'TROUTE6' environment variable to encode the name of the IPv6 traceroute utility. By default (without a configuration file), this variable is not set, resulting in failures: # ./ip6_forward_instats_vrf.sh TEST: ping6 [ OK ] TEST: Ip6InTooBigErrors [ OK ] TEST: Ip6InHdrErrors [FAIL] TEST: Ip6InAddrErrors [ OK ] TEST: Ip6InDiscards [ OK ] Fix by setting a default utility name and skip the test if the utility is not present. Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: bridge_mdb_max: Check iproute2 versionIdo Schimmel1-0/+5
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in errors: # ./bridge_mdb_max.sh INFO: 802.1d tests TEST: cfg4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: ctl4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: cfg6: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected [...] Fix by skipping the test if iproute2 is too old. Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: bridge_mdb: Check iproute2 versionIdo Schimmel1-0/+5
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in error: # ./bridge_mdb.sh INFO: # Host entries configuration tests TEST: Common host entries configuration tests (IPv4) [FAIL] Managed to add IPv4 host entry with a filter mode TEST: Common host entries configuration tests (IPv6) [FAIL] Managed to add IPv6 host entry with a filter mode TEST: Common host entries configuration tests (L2) [FAIL] Managed to add L2 host entry with a filter mode INFO: # Port group entries configuration tests - (*, G) Command "replace" is unknown, try "bridge mdb help". [...] Fix by skipping the test if iproute2 is too old. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: Switch off timeoutIdo Schimmel1-0/+1
The default timeout for selftests is 45 seconds, but it is not enough for forwarding selftests which can takes minutes to finish depending on the number of tests cases: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # TEST: IGMPv2 report 239.10.10.10 [ OK ] # TEST: IGMPv2 leave 239.10.10.10 [ OK ] # TEST: IGMPv3 report 239.10.10.10 is_include [ OK ] # TEST: IGMPv3 report 239.10.10.10 include -> allow [ OK ] # not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds Fix by switching off the timeout and setting it to 0. A similar change was done for BPF selftests in commit 6fc5916cc256 ("selftests: bpf: Switch off timeout"). Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09selftests: forwarding: Skip test when no interfaces are specifiedIdo Schimmel1-0/+5
As explained in [1], the forwarding selftests are meant to be run with either physical loopbacks or veth pairs. The interfaces are expected to be specified in a user-provided forwarding.config file or as command line arguments. By default, this file is not present and the tests fail: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # Command line is not complete. Try option "help" # Failed to create netif not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1 [...] Fix by skipping a test if interfaces are not provided either via the configuration file or command line arguments. # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # SKIP: Cannot create interface. Name not specified ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP [1] tools/testing/selftests/net/forwarding/README Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Reported-by: Mirsad Todorovac <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09nexthop: Fix infinite nexthop bucket dump when using maximum nexthop IDIdo Schimmel1-0/+5
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop bucket dump callback always returns a positive number if nexthop buckets were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthop buckets are present. In the last recvmsg() call the dump callback will not fill in any nexthop buckets because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id 10 group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128 id 10 index 0 idle_time 6.66 nhid 1 id 10 index 1 idle_time 6.66 nhid 1 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # ip nexthop bucket id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148 id 4294967295 index 0 idle_time 6.61 nhid 1 id 4294967295 index 1 idle_time 6.61 nhid 1 +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-09nexthop: Fix infinite nexthop dump when using maximum nexthop IDIdo Schimmel1-0/+5
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop dump callback always returns a positive number if nexthops were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthops are present. In the last recvmsg() call the dump callback will not fill in any nexthops because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip nexthop add id 1 blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36 id 1 blackhole recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip nexthop add id $((2**32-1)) blackhole # ip nexthop id 4294967295 blackhole id 4294967295 blackhole [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response: # ip nexthop add id $((2**32-1)) blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56 id 4294967295 blackhole +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: ab84be7e54fc ("net: Initial nexthop code") Reported-by: Petr Machata <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-08perf stat: Don't display zero tool countsIan Rogers1-0/+5
Andi reported (see link below) a regression when printing the 'duration_time' tool event, where it gets printed as "not counted" for most of the CPUs, fix it by skipping zero counts for tool events. Reported-by: Andi Kleen <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Tested-by: Andi Kleen <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Claire Jensen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/all/ZMlrzcVrVi1lTDmn@tassilo/ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-08-08tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+1
To pick up the changes from these csets: 522b1d69219d8f08 ("x86/cpu/amd: Add a Zenbleed fix") That cause no changes to tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after $ Just silences this perf build warning: Warning: Kernel ABI header differences: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov (AMD) <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-08-08Revert "perf report: Append inlines to non-DWARF callchains"Arnaldo Carvalho de Melo1-5/+0
This reverts commit 46d21ec067490ab9cdcc89b9de5aae28786a8b8e. The tests were made with a specific workload, further tests on a recently updated fedora 38 system with a system wide perf.data file shows 'perf report' taking excessive time resolving inlines in vmlinux, so lets revert this until a full investigation and improvement on the addr2line support code is made. Reported-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Artem Savkov <[email protected]> Tested-by: Jesper Dangaard Brouer <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Milian Wolff <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-08-07Merge tag 'x86_bugs_srso' of ↵Linus Torvalds2-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/srso fixes from Borislav Petkov: "Add a mitigation for the speculative RAS (Return Address Stack) overflow vulnerability on AMD processors. In short, this is yet another issue where userspace poisons a microarchitectural structure which can then be used to leak privileged information through a side channel" * tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/srso: Tie SBPB bit setting to microcode patch detection x86/srso: Add a forgotten NOENDBR annotation x86/srso: Fix return thunks in generated code x86/srso: Add IBPB on VMEXIT x86/srso: Add IBPB x86/srso: Add SRSO_NO support x86/srso: Add IBPB_BRTYPE support x86/srso: Add a Speculative RAS Overflow mitigation x86/bugs: Increase the x86 bugs vector size to two u32s
2023-08-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-1/+5
Pull kvm fixes from Paolo Bonzini: "x86: - Fix SEV race condition ARM: - Fixes for the configuration of SVE/SME traps when hVHE mode is in use - Allow use of pKVM on systems with FF-A implementations that are v1.0 compatible - Request/release percpu IRQs (arch timer, vGIC maintenance) correctly when pKVM is in use - Fix function prototype after __kvm_host_psci_cpu_entry() rename - Skip to the next instruction when emulating writes to TCR_EL1 on AmpereOne systems Selftests: - Fix missing include" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: selftests/rseq: Fix build with undefined __weak KVM: SEV: remove ghcb variable declarations KVM: SEV: only access GHCB fields once KVM: SEV: snapshot the GHCB before accessing it KVM: arm64: Skip instruction after emulating write to TCR_EL1 KVM: arm64: fix __kvm_host_psci_cpu_entry() prototype KVM: arm64: Fix resetting SME trap values on reset for (h)VHE KVM: arm64: Fix resetting SVE trap values on reset for hVHE KVM: arm64: Use the appropriate feature trap register when activating traps KVM: arm64: Helper to write to appropriate feature trap register based on mode KVM: arm64: Disable SME traps for (h)VHE at setup KVM: arm64: Use the appropriate feature trap register for SVE at EL2 setup KVM: arm64: Factor out code for checking (h)VHE mode into a macro KVM: arm64: Rephrase percpu enable/disable tracking in terms of hyp KVM: arm64: Fix hardware enable/disable flows for pKVM KVM: arm64: Allow pKVM on v1.0 compatible FF-A implementations
2023-08-05selftests: fchmodat2: remove duplicate unneeded definesMuhammad Usama Anjum2-21/+1
These duplicate defines should automatically be picked up from kernel headers. Use KHDR_INCLUDES to add kernel header files. Signed-off-by: Muhammad Usama Anjum <[email protected]> Message-Id: <[email protected]> Signed-off-by: Christian Brauner <[email protected]>
2023-08-04selftests: mptcp: join: fix 'implicit EP' testAndrea Claudi1-2/+3
mptcp_join 'implicit EP' test currently fails when using ip mptcp: $ ./mptcp_join.sh -iI <snip> 001 implicit EP creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 ' Error: too many addresses or duplicate one: -22. ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 ' modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal ' This happens because of two reasons: - iproute v6.3.0 does not support the implicit flag, fixed with iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit flag") - pm_nl_check_endpoint wrongly expects the ip address to be repeated two times in iproute output, and does not account for a final whitespace in it. This fixes the issue trimming the whitespace in the output string and removing the double address in the expected string. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: [email protected] Signed-off-by: Andrea Claudi <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-04selftests: mptcp: join: fix 'delete and re-add' testAndrea Claudi1-0/+1
mptcp_join 'delete and re-add' test fails when using ip mptcp: $ ./mptcp_join.sh -iI <snip> 002 delete and re-add before delete[ ok ] mptcp_info subflows=1 [ ok ] Error: argument "ADDRESS" is wrong: invalid for non-zero id address after delete[fail] got 2:2 subflows expected 1 This happens because endpoint delete includes an ip address while id is not 0, contrary to what is indicated in the ip mptcp man page: "When used with the delete id operation, an IFADDR is only included when the ID is 0." This fixes the issue using the $addr variable in pm_nl_del_endpoint() only when id is 0. Fixes: 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers") Cc: [email protected] Signed-off-by: Andrea Claudi <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Matthieu Baerts <[email protected]> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-04selftests: net: test vxlan pmtu exceptions with tcpFlorian Westphal1-0/+35
TCP might get stuck if a nonlinear skb exceeds the path MTU, icmp error contains an incorrect icmp checksum in that case. Extend the existing test for vxlan to also send at least 1MB worth of data via TCP in addition to the existing 'large icmp packet adds route exception'. On my test VM this fails due to 0-size output file without "tunnels: fix kasan splat when generating ipv4 pmtu error". Signed-off-by: Florian Westphal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-04Merge tag 'hyperv-fixes-signed-20230804' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Fix a bug in a python script for Hyper-V (Ani Sinha) - Workaround a bug in Hyper-V when IBT is enabled (Michael Kelley) - Fix an issue parsing MP table when Linux runs in VTL2 (Saurabh Sengar) - Several cleanup patches (Nischala Yelchuri, Kameron Carr, YueHaibing, ZhiHu) * tag 'hyperv-fixes-signed-20230804' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer() x86/hyperv: add noop functions to x86_init mpparse functions vmbus_testing: fix wrong python syntax for integer value comparison x86/hyperv: fix a warning in mshyperv.h x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg Drivers: hv: Change hv_free_hyperv_page() to take void * argument
2023-08-04Merge tag 'riscv-for-linus-6.5-rc5' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A pair of fixes for build-related failures in the selftests - A fix for a sparse warning in acpi_os_ioremap() - A fix to restore the kernel PA offset in vmcoreinfo, to fix crash handling * tag 'riscv-for-linus-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: Documentation: kdump: Add va_kernel_pa_offset for RISCV64 riscv: Export va_kernel_pa_offset in vmcoreinfo RISC-V: ACPI: Fix acpi_os_ioremap to return iomem address selftests: riscv: Fix compilation error with vstate_exec_nolibc.c selftests/riscv: fix potential build failure during the "emit_tests" step
2023-08-04selftests/rseq: Fix build with undefined __weakMark Brown2-1/+5
Commit 3bcbc20942db ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+") which is now in Linus' tree introduced uses of __weak but did nothing to ensure that a definition is provided for it resulting in build failures for the rseq tests: rseq.c:41:1: error: unknown type name '__weak' __weak ptrdiff_t __rseq_offset; ^ rseq.c:41:17: error: expected ';' after top level declarator __weak ptrdiff_t __rseq_offset; ^ ; rseq.c:42:1: error: unknown type name '__weak' __weak unsigned int __rseq_size; ^ rseq.c:43:1: error: unknown type name '__weak' __weak unsigned int __rseq_flags; Fix this by using the definition from tools/include compiler.h. Fixes: 3bcbc20942db ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+") Signed-off-by: Mark Brown <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-08-04selftests: cgroup: fix test_kmem_basic false positivesJohannes Weiner1-0/+4
This test fails routinely in our prod testing environment, and I can reproduce it locally as well. The test allocates dcache inside a cgroup, then drops the memory limit and checks that usage drops correspondingly. The reason it fails is because dentries are freed with an RCU delay - a debugging sleep shows that usage drops as expected shortly after. Insert a 1s sleep after dropping the limit. This should be good enough, assuming that machines running those tests are otherwise not very busy. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Johannes Weiner <[email protected]> Acked-by: Paul E. McKenney <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Roman Gushchin <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-08-04selftests: mm: ksm: fix incorrect evaluation of parameterAyush Jain1-0/+1
A missing break in kms_tests leads to kselftest hang when the parameter -s is used. In current code flow because of missing break in -s, -t parses args spilled from -s and as -t accepts only valid values as 0,1 so any arg in -s >1 or <0, gets in ksm_test failure This went undetected since, before the addition of option -t, the next case -M would immediately break out of the switch statement but that is no longer the case Add the missing break statement. ----Before---- ./ksm_tests -H -s 100 Invalid merge type ----After---- ./ksm_tests -H -s 100 Number of normal pages: 0 Number of huge pages: 50 Total size: 100 MiB Total time: 0.401732682 s Average speed: 248.922 MiB/s Link: https://lkml.kernel.org/r/[email protected] Fixes: 07115fcc15b4 ("selftests/mm: add new selftests for KSM") Signed-off-by: Ayush Jain <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Cc: Stefan Roesch <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-08-04radix tree test suite: fix incorrect allocation size for pthreadsColin Ian King1-1/+1
Currently the pthread allocation for each array item is based on the size of a pthread_t pointer and should be the size of the pthread_t structure, so the allocation is under-allocating the correct size. Fix this by using the size of each element in the pthreads array. Static analysis cppcheck reported: tools/testing/radix-tree/regression1.c:180:2: warning: Size of pointer 'threads' used instead of size of its data. [pointerSize] Link: https://lkml.kernel.org/r/[email protected] Fixes: 1366c37ed84b ("radix tree test harness") Signed-off-by: Colin Ian King <[email protected]> Cc: Konstantin Khlebnikov <[email protected]> Cc: Matthew Wilcox (Oracle) <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-08-04Merge tag 'counter-fixes-for-6.5b' of ↵Greg Kroah-Hartman1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus William writes: Second set of Counter fixes for 6.5 The I8254 Kconfig entry is repositioned to resolve a misplacement causing the "Counter support" submenu items to disappear in menuconfig. The tools/counter/Makefile clean recipe is adjusted to replace rmdir with an equivalent set of rm to prevent failure if someone tries to clean the counter directory without building it first. * tag 'counter-fixes-for-6.5b' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: tools/counter: Makefile: Replace rmdir by rm to avoid make,clean failure counter: Fix menuconfig "Counter support" submenu entries disappearance
2023-08-03Merge tag 'perf-tools-fixes-for-v6.5-2-2023-08-03' of ↵Linus Torvalds8-36/+81
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix segfault in the powerpc specific arch_skip_callchain_idx function. The patch doing the reference count init/exit that went into 6.5 missed this function. - Fix regression reading the arm64 PMU cpu slots in sysfs, a patch removing some code duplication ended up duplicating the /sysfs prefix for these files. - Fix grouping of events related to topdown, addressing a regression on the CSV output produced by 'perf stat' noticed on the downstream tool toplev. - Fix the uprobe_from_different_cu 'perf test' entry, it is failing when gcc isn't available, so we need to check that and skip the test if it is not installed. * tag 'perf-tools-fixes-for-v6.5-2-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf test parse-events: Test complex name has required event format perf pmus: Create placholder regardless of scanning core_only perf test uprobe_from_different_cu: Skip if there is no gcc perf parse-events: Only move force grouped evsels when sorting perf parse-events: When fixing group leaders always set the leader perf parse-events: Extra care around force grouped events perf callchain powerpc: Fix addr location init during arch_skip_callchain_idx function perf pmu arm64: Fix reading the PMU cpu slots in sysfs
2023-08-03Merge tag 'net-6.5-rc5' of ↵Linus Torvalds3-2/+27
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and wireless. Nothing scary here. Feels like the first wave of regressions from v6.5 is addressed - one outstanding fix still to come in TLS for the sendpage rework. Current release - regressions: - udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES - dsa: fix older DSA drivers using phylink Previous releases - regressions: - gro: fix misuse of CB in udp socket lookup - mlx5: unregister devlink params in case interface is down - Revert "wifi: ath11k: Enable threaded NAPI" Previous releases - always broken: - sched: cls_u32: fix match key mis-addressing - sched: bind logic fixes for cls_fw, cls_u32 and cls_route - add bound checks to a number of places which hand-parse netlink - bpf: disable preemption in perf_event_output helpers code - qed: fix scheduling in a tasklet while getting stats - avoid using APIs which are not hardirq-safe in couple of drivers, when we may be in a hard IRQ (netconsole) - wifi: cfg80211: fix return value in scan logic, avoid page allocator warning - wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D (DBDC) Misc: - drop handful of inactive maintainers, put some new in place" * tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits) MAINTAINERS: update TUN/TAP maintainers test/vsock: remove vsock_perf executable on `make clean` tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen tcp_metrics: annotate data-races around tm->tcpm_net tcp_metrics: annotate data-races around tm->tcpm_vals[] tcp_metrics: annotate data-races around tm->tcpm_lock tcp_metrics: annotate data-races around tm->tcpm_stamp tcp_metrics: fix addr_same() helper prestera: fix fallback to previous version on same major version udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES net/mlx5e: Set proper IPsec source port in L4 selector net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio net/mlx5: fs_core: Make find_closest_ft more generic wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() vxlan: Fix nexthop hash size ip6mr: Fix skb_under_panic in ip6mr_cache_report() s390/qeth: Don't call dev_close/dev_open (DOWN/UP) net: tap_open(): set sk_uid from current_fsuid() net: tun_chr_open(): set sk_uid from current_fsuid() net: dcb: choose correct policy to parse DCB_ATTR_BCN ...
2023-08-03test/vsock: remove vsock_perf executable on `make clean`Stefano Garzarella1-1/+1
We forgot to add vsock_perf to the rm command in the `clean` target, so now we have a left over after `make clean` in tools/testing/vsock. Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility") Cc: [email protected] Signed-off-by: Stefano Garzarella <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Simon Horman <[email protected]> # build-tested Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-02selftests: riscv: Fix compilation error with vstate_exec_nolibc.cAlexandre Ghiti1-2/+0
The following error happens: In file included from vstate_exec_nolibc.c:2: /usr/include/riscv64-linux-gnu/sys/prctl.h:42:12: error: conflicting types for ‘prctl’; h ave ‘int(int, ...)’ 42 | extern int prctl (int __option, ...) __THROW; | ^~~~~ In file included from ./../../../../include/nolibc/nolibc.h:99, from <command-line>: ./../../../../include/nolibc/sys.h:892:5: note: previous definition of ‘prctl’ with type ‘int(int, long unsigned int, long unsigned int, long unsigned int, long unsigned int) ’ 892 | int prctl(int option, unsigned long arg2, unsigned long arg3, | ^~~~~ Fix this by not including <sys/prctl.h>, which is not needed here since prctl syscall is directly called using its number. Fixes: 7cf6198ce22d ("selftests: Test RISC-V Vector prctl interface") Signed-off-by: Alexandre Ghiti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-08-02selftests/riscv: fix potential build failure during the "emit_tests" stepJohn Hubbard1-1/+1
The riscv selftests (which were modeled after the arm64 selftests) are improperly declaring the "emit_tests" target to depend upon the "all" target. This approach, when combined with commit 9fc96c7c19df ("selftests: error out if kernel header files are not yet built"), has caused build failures [1] on arm64, and is likely to cause similar failures for riscv. To fix this, simply remove the unnecessary "all" dependency from the emit_tests target. The dependency is still effectively honored, because again, invocation is via "install", which also depends upon "all". An alternative approach would be to harden the emit_tests target so that it can depend upon "all", but that's a lot more complicated and hard to get right, and doesn't seem worth it, especially given that emit_tests should probably not be overridden at all. [1] https://lore.kernel.org/[email protected] Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built") Signed-off-by: John Hubbard <[email protected]> Tested-by: Alexandre Ghiti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-08-01selftest: net: Assert on a proper value in so_incoming_cpu.c.Kuniyuki Iwashima1-1/+1
Dan Carpenter reported an error spotted by Smatch. ./tools/testing/selftests/net/so_incoming_cpu.c:163 create_clients() error: uninitialized symbol 'ret'. The returned value of sched_setaffinity() should be checked with ASSERT_EQ(), but the value was not saved in a proper variable, resulting in an error above. Let's save the returned value of with sched_setaffinity(). Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.") Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/linux-kselftest/[email protected]/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-01perf test parse-events: Test complex name has required event formatIan Rogers3-1/+23
test__checkevent_complex_name will use an "event" format which if not present, such as with a placeholder PMU, will cause test failures. Skip the test in this case to avoid failures in restricted environments. Add perf_pmu__has_format utility as a general PMU utility. Fixes: 628eaa4e877af823 ("perf pmus: Add placeholder core PMU") Signed-off-by: Ian Rogers <[email protected]> Tested-by: Thomas Richter <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-08-01perf pmus: Create placholder regardless of scanning core_onlyIan Rogers1-9/+7
If scanning all PMUs the placeholder is still necessary if no core PMU is found. This situation occurs in perf test's parse-events test, when uncore events appear before core. Fixes: 628eaa4e877af823 ("perf pmus: Add placeholder core PMU") Signed-off-by: Ian Rogers <[email protected]> Tested-by: Thomas Richter <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-31net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX.Kuniyuki Iwashima1-0/+25
syzkaller found zero division error [0] in div_s64_rem() called from get_cycle_time_elapsed(), where sched->cycle_time is the divisor. We have tests in parse_taprio_schedule() so that cycle_time will never be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed(). The problem is that the types of divisor are different; cycle_time is s64, but the argument of div_s64_rem() is s32. syzkaller fed this input and 0x100000000 is cast to s32 to be 0. @TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000} We use s64 for cycle_time to cast it to ktime_t, so let's keep it and set max for cycle_time. While at it, we prevent overflow in setup_txtime() and add another test in parse_taprio_schedule() to check if cycle_time overflows. Also, we add a new tdc test case for this issue. [0]: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline] RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline] RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344 Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10 RSP: 0018:ffffc90000acf260 EFLAGS: 00010206 RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000 RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934 R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800 R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> get_packet_txtime net/sched/sch_taprio.c:508 [inline] taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577 taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658 dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732 __dev_xmit_skb net/core/dev.c:3821 [inline] __dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169 dev_queue_xmit include/linux/netdevice.h:3088 [inline] neigh_resolve_output net/core/neighbour.c:1552 [inline] neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532 neigh_output include/net/neighbour.h:544 [inline] ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135 __ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196 ip6_finish_output net/ipv6/ip6_output.c:207 [inline] NF_HOOK_COND include/linux/netfilter.h:292 [inline] ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228 dst_output include/net/dst.h:458 [inline] NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303 ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508 ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666 addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175 process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597 worker_thread+0x60f/0x1240 kernel/workqueue.c:2748 kthread+0x2fe/0x3f0 kernel/kthread.c:389 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> Modules linked in: Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Co-developed-by: Eric Dumazet <[email protected]> Co-developed-by: Pedro Tammela <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-07-30Merge tag 'probes-fixes-v6.5-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probe fixes from Masami Hiramatsu: - probe-events: add NULL check for some BTF API calls which can return error code and NULL. - ftrace selftests: check fprobe and kprobe event correctly. This fixes a miss condition of the test command. - kprobes: do not allow probing functions that start with "__cfi_" or "__pfx_" since those are auto generated for kernel CFI and not executed. * tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: kprobes: Prohibit probing on CFI preamble symbol selftests/ftrace: Fix to check fprobe event eneblement tracing/probes: Fix to add NULL check for BTF APIs
2023-07-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-62/+110
Pull kvm fixes from Paolo Bonzini: "x86: - Do not register IRQ bypass consumer if posted interrupts not supported - Fix missed device interrupt due to non-atomic update of IRR - Use GFP_KERNEL_ACCOUNT for pid_table in ipiv - Make VMREAD error path play nice with noinstr - x86: Acquire SRCU read lock when handling fastpath MSR writes - Support linking rseq tests statically against glibc 2.35+ - Fix reference count for stats file descriptors - Detect userspace setting invalid CR0 Non-KVM: - Remove coccinelle script that has caused multiple confusion ("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage", acked by Greg)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: selftests: Expand x86's sregs test to cover illegal CR0 values KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage" KVM: selftests: Verify stats fd is usable after VM fd has been closed KVM: selftests: Verify stats fd can be dup()'d and read KVM: selftests: Verify userspace can create "redundant" binary stats files KVM: selftests: Explicitly free vcpus array in binary stats test KVM: selftests: Clean up stats fd in common stats_test() helper KVM: selftests: Use pread() to read binary stats header KVM: Grab a reference to KVM for VM and vCPU stats file descriptors selftests/rseq: Play nice with binaries statically linked against glibc 2.35+ Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid" KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path KVM: VMX: Make VMREAD error path play nice with noinstr KVM: x86/irq: Conditionally register IRQ bypass consumer again KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv KVM: x86: check the kvm_cpu_get_interrupt result before using it KVM: x86: VMX: set irr_pending in kvm_apic_update_irr ...
2023-07-29KVM: selftests: Expand x86's sregs test to cover illegal CR0 valuesSean Christopherson1-31/+39
Add coverage to x86's set_sregs_test to verify KVM rejects vendor-agnostic illegal CR0 values, i.e. CR0 values whose legality doesn't depend on the current VMX mode. KVM historically has neglected to reject bad CR0s from userspace, i.e. would happily accept a completely bogus CR0 via KVM_SET_SREGS{2}. Punt VMX specific subtests to future work, as they would require quite a bit more effort, and KVM gets coverage for CR0 checks in general through other means, e.g. KVM-Unit-Tests. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-07-29KVM: selftests: Verify stats fd is usable after VM fd has been closedSean Christopherson1-2/+8
Verify that VM and vCPU binary stats files are usable even after userspace has put its last direct reference to the VM. This is a regression test for a UAF bug where KVM didn't gift the stats files a reference to the VM. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-07-29KVM: selftests: Verify stats fd can be dup()'d and readSean Christopherson1-1/+7
Expand the binary stats test to verify that a stats fd can be dup()'d and read, to (very) roughly simulate userspace passing around the file. Adding the dup() test is primarily an intermediate step towards verifying that userspace can read VM/vCPU stats before _and_ after userspace closes its copy of the VM fd; the dup() test itself is only mildly interesting. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-07-29KVM: selftests: Verify userspace can create "redundant" binary stats filesSean Christopherson1-2/+23
Verify that KVM doesn't artificially limit KVM_GET_STATS_FD to a single file per VM/vCPU. There's no known use case for getting multiple stats fds, but it should work, and more importantly creating multiple files will make it easier to test that KVM correct manages VM refcounts for stats files. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-07-29KVM: selftests: Explicitly free vcpus array in binary stats testSean Christopherson1-0/+1
Explicitly free the all-encompassing vcpus array in the binary stats test so that the test is consistent with respect to freeing all dynamically allocated resources (versus letting them be freed on exit). Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-07-29KVM: selftests: Clean up stats fd in common stats_test() helperSean Christopherson1-18/+4
Move the stats fd cleanup code into stats_test() and drop the superfluous vm_stats_test() and vcpu_stats_test() helpers in order to decouple creation of the stats file from consuming/testing the file (deduping code is a bonus). This will make it easier to test various edge cases related to stats, e.g. that userspace can dup() a stats fd, that userspace can have multiple stats files for a singleVM/vCPU, etc. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-07-29KVM: selftests: Use pread() to read binary stats headerSean Christopherson2-4/+8
Use pread() with an explicit offset when reading the header and the header name for a binary stats fd so that the common helper and the binary stats test don't subtly rely on the file effectively being untouched, e.g. to allow multiple reads of the header, name, etc. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-07-29selftests/rseq: Play nice with binaries statically linked against glibc 2.35+Sean Christopherson1-6/+22
To allow running rseq and KVM's rseq selftests as statically linked binaries, initialize the various "trampoline" pointers to point directly at the expect glibc symbols, and skip the dlysm() lookups if the rseq size is non-zero, i.e. the binary is statically linked *and* the libc registered its own rseq. Define weak versions of the symbols so as not to break linking against libc versions that don't support rseq in any capacity. The KVM selftests in particular are often statically linked so that they can be run on targets with very limited runtime environments, i.e. test machines. Fixes: 233e667e1ae3 ("selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35") Cc: Aaron Lewis <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-07-28perf test uprobe_from_different_cu: Skip if there is no gccGeorg Müller1-1/+7
Without gcc, the test will fail. On cleanup, ignore probe removal errors. Otherwise, in case of an error adding the probe, the temporary directory is not removed. Fixes: 56cbeacf14353057 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()") Signed-off-by: Georg Müller <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Georg Müller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/CAP-5=fUP6UuLgRty3t2=fQsQi3k4hDMz415vWdp1x88QMvZ8ug@mail.gmail.com/ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28Merge tag 'cxl-fixes-6.5-rc4' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl fixes from Vishal Verma: - Update MAINTAINERS for cxl - A few static analysis fixes - Fix a Kconfig dependency for CONFIG_FW_LOADER * tag 'cxl-fixes-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: tools/testing/cxl: Remove unused SZ_512G macro cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws() cxl/acpi: Fix a use-after-free in cxl_parse_cfmws() cxl: Update MAINTAINERS cxl/mem: Fix a double shift bug cxl: fix CONFIG_FW_LOADER dependency
2023-07-27Merge tag 'net-6.5-rc4' of ↵Linus Torvalds2-11/+9
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, netfilter. Current release - regressions: - core: fix splice_to_socket() for O_NONBLOCK socket - af_unix: fix fortify_panic() in unix_bind_bsd(). - can: raw: fix lockdep issue in raw_release() Previous releases - regressions: - tcp: reduce chance of collisions in inet6_hashfn(). - netfilter: skip immediate deactivate in _PREPARE_ERROR - tipc: stop tipc crypto on failure in tipc_node_create - eth: igc: fix kernel panic during ndo_tx_timeout callback - eth: iavf: fix potential deadlock on allocation failure Previous releases - always broken: - ipv6: fix bug where deleting a mngtmpaddr can create a new temporary address - eth: ice: fix memory management in ice_ethtool_fdir.c - eth: hns3: fix the imp capability bit cannot exceed 32 bits issue - eth: vxlan: calculate correct header length for GPE - eth: stmmac: apply redundant write work around on 4.xx too" * tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits) tipc: stop tipc crypto on failure in tipc_node_create af_unix: Terminate sun_path when bind()ing pathname socket. tipc: check return value of pskb_trim() benet: fix return value check in be_lancer_xmit_workarounds() virtio-net: fix race between set queues and probe net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64 splice, net: Fix splice_to_socket() for O_NONBLOCK socket net: fec: tx processing does not call XDP APIs if budget is 0 mptcp: more accurate NL event generation selftests: mptcp: join: only check for ip6tables if needed tools: ynl-gen: fix parse multi-attr enum attribute tools: ynl-gen: fix enum index in _decode_enum(..) netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR netfilter: nft_set_rbtree: fix overlap expiration walk igc: Fix Kernel Panic during ndo_tx_timeout callback net: dsa: qca8k: fix mdb add/del case with 0 VID net: dsa: qca8k: fix broken search_and_del net: dsa: qca8k: fix search_and_insert wrong handling of new rule net: dsa: qca8k: enable use_single_write for qca8xxx ...
2023-07-27perf parse-events: Only move force grouped evsels when sortingIan Rogers1-13/+26
Prior to this change, events without a group would be sorted as if they were from the location of the first event without a group. For example instructions and cycles are without a group: instructions,{imc_free_running/data_read/,imc_free_running/data_write/},cycles parse events would create an eventual evlist like: instructions,cycles,{uncore_imc_free_running_0/data_read/,uncore_imc_free_running_1/data_read/,uncore_imc_free_running_0/data_write/,uncore_imc_free_running_1/data_write/} This is done so that perf metric events, that must always be in a group, will be adjacent and so can be forced into a group. This change modifies the sorting so that only force grouped events, like perf metrics, are sorted and all other events keep their position with respect to groups in the evlist. The location of the force grouped event is chosen to match the first force grouped event. For architectures without force grouped events, ie anything not Intel Icelake or newer, this should mean sorting and fixing doesn't modify the event positions except when fixing the grouping for PMUs of things like uncore events. Fixes: 347c2f0a0988c59c ("perf parse-events: Sort and group parsed events") Reported-by: Andi Kleen <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Tested-by: Andi Kleen <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Xing Zhengjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.