| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since commit 5821ba969511 ("selftests: Add test plan API to kselftest.h
and adjust callers") accidentally introduced 'a' typo in the front of
run_test() function, breakpoint_test_arm64.c became not able to be
compiled.
Remove the 'a' from arun_test().
Fixes: 5821ba969511 ("selftests: Add test plan API to kselftest.h and adjust callers")
Reported-by: Jun Takahashi <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Kees Cook <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
Pull on for-linus to resolve what otherwise would have been a conflict
with the cgroups rstat patchset from Tejun.
* for-linus: (942 commits)
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
iocost: don't nest spin_lock_irq in ioc_weight_write()
io_uring: ensure we clear io_kiocb->result before each issue
um-ubd: Entrust re-queue to the upper layers
nvme-multipath: remove unused groups_only mode in ana log
nvme-multipath: fix possible io hang after ctrl reconnect
io_uring: don't touch ctx in setup after ring fd install
io_uring: Fix leaked shadow_req
Linux 5.4-rc5
riscv: cleanup do_trap_break
nbd: verify socket is supported during setup
ata: libahci_platform: Fix regulator_get_optional() misuse
nbd: handle racing with error'ed out commands
nbd: protect cmd->status with cmd->lock
io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD
io_uring: used cached copies of sq->dropped and cq->overflow
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
...
|
|
Access the skb->cb[] in the kfree_skb test.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
If we get ELF file with "maps" section, but no symbols pointing to it, we'll
end up with division by zero. Add check against this situation and exit early
with error. Found by Coverity scan against Github libbpf sources.
Fixes: bf82927125dd ("libbpf: refactor map initialization")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Perform size check always in btf__resolve_size. Makes the logic a bit more
robust against corrupted BTF and silences LGTM/Coverity complaining about
always true (size < 0) check.
Fixes: 69eaab04c675 ("btf: extract BTF type size calculation")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fix few issues found by Coverity and LGTM.
Fixes: b053b439b72a ("bpf: libbpf: bpftool: Print bpf_line_info during prog dump")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fix a potential overflow issue found by LGTM analysis, based on Github libbpf
source code.
Fixes: 3d65014146c6 ("bpf: libbpf: Add btf_line_info support to libbpf")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Coverity scan against Github libbpf code found the issue of not freeing memory and
leaving already freed memory still referenced from bpf_program. Fix it by
re-assigning successfully reallocated memory sooner.
Fixes: 2993e0515bb4 ("tools/bpf: add support to read .BTF.ext sections")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fix issue reported by static analysis (Coverity). If bpf_prog_get_fd_by_id()
fails, xsk_lookup_bpf_maps() will fail as well and clean-up code will attempt
close() with fd=-1. Fix by checking bpf_prog_get_fd_by_id() return result and
exiting early.
Fixes: 10a13bb40e54 ("libbpf: remove qidconf and better support external bpf programs.")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When compiling larger programs with bpf_asm, it's possible to
accidentally exceed jt/jf range, in which case it won't complain, but
rather silently emit a truncated offset, leading to a "happy debugging"
situation.
Add a warning to help detecting such issues. It could be made an error
instead, but this might break compilation of existing code (which might
be working by accident).
Signed-off-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Previous patch has implemented a new option "--total-cycles". But only
stdio mode is supported.
This patch supports the tui mode and support '--percent-limit'.
For example,
perf record -b ./div
perf report --total-cycles --percent-limit 1
# Samples: 2753248 of event 'cycles'
Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
26.04% 2.8M 0.40% 18 [div.c:42 -> div.c:39] div
15.17% 1.2M 0.16% 7 [random_r.c:357 -> random_r.c:380] libc-2.27.so
5.11% 402.0K 0.04% 2 [div.c:27 -> div.c:28] div
4.87% 381.6K 0.04% 2 [random.c:288 -> random.c:291] libc-2.27.so
4.53% 381.0K 0.04% 2 [div.c:40 -> div.c:40] div
3.85% 300.9K 0.02% 1 [div.c:22 -> div.c:25] div
3.08% 241.1K 0.02% 1 [rand.c:26 -> rand.c:27] libc-2.27.so
3.06% 240.0K 0.02% 1 [random.c:291 -> random.c:291] libc-2.27.so
2.78% 215.7K 0.02% 1 [random.c:298 -> random.c:298] libc-2.27.so
2.52% 198.3K 0.02% 1 [random.c:293 -> random.c:293] libc-2.27.so
2.36% 184.8K 0.02% 1 [rand.c:28 -> rand.c:28] libc-2.27.so
2.33% 180.5K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so
2.28% 176.7K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so
2.20% 168.8K 0.02% 1 [rand@plt+0 -> rand@plt+0] div
1.98% 158.2K 0.02% 1 [random_r.c:388 -> random_r.c:388] libc-2.27.so
1.57% 123.3K 0.02% 1 [div.c:42 -> div.c:44] div
1.44% 116.0K 0.42% 19 [random_r.c:357 -> random_r.c:394] libc-2.27.so
--------------------------------------------------
v7:
---
1. Since we have used use_browser in report__browse_block_hists
to support stdio mode, now we also add supporting for tui.
2. Move block tui browser code from ui/browsers/hists.c
to block-info.c.
v6:
---
Create report__tui_browse_block_hists in block-info.c
(codes are moved from builtin-report.c).
v5:
---
Fix a crash issue when running perf report without
'--total-cycles'. The issue is because the internal flag
is renamed from 'total_cycles' to 'total_cycles_mode' in
previous patch but this patch still uses 'total_cycles'
to check if the '--total-cycles' option is enabled, which
causes the code to be inconsistent.
v4:
---
Since the block collection is moved out of printing in
previous patch, this patch is updated accordingly for
tui supporting.
v3:
---
Minor change since the function name is changed:
block_total_cycles_percent -> block_info__total_cycles_percent
Signed-off-by: Jin Yao <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We have already supported the '--total-cycles' option in previous patch.
It's also useful to show entries only above a threshold percent.
This patch enables '--percent-limit' for not showing entries
under that percent.
For example:
perf report --total-cycles --stdio --percent-limit 1
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 2M of event 'cycles'
# Event count (approx.): 2753248
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
# ............... .............. ........... .......... ................................................................. ....................
#
26.04% 2.8M 0.40% 18 [div.c:42 -> div.c:39] div
15.17% 1.2M 0.16% 7 [random_r.c:357 -> random_r.c:380] libc-2.27.so
5.11% 402.0K 0.04% 2 [div.c:27 -> div.c:28] div
4.87% 381.6K 0.04% 2 [random.c:288 -> random.c:291] libc-2.27.so
4.53% 381.0K 0.04% 2 [div.c:40 -> div.c:40] div
3.85% 300.9K 0.02% 1 [div.c:22 -> div.c:25] div
3.08% 241.1K 0.02% 1 [rand.c:26 -> rand.c:27] libc-2.27.so
3.06% 240.0K 0.02% 1 [random.c:291 -> random.c:291] libc-2.27.so
2.78% 215.7K 0.02% 1 [random.c:298 -> random.c:298] libc-2.27.so
2.52% 198.3K 0.02% 1 [random.c:293 -> random.c:293] libc-2.27.so
2.36% 184.8K 0.02% 1 [rand.c:28 -> rand.c:28] libc-2.27.so
2.33% 180.5K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so
2.28% 176.7K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so
2.20% 168.8K 0.02% 1 [rand@plt+0 -> rand@plt+0] div
1.98% 158.2K 0.02% 1 [random_r.c:388 -> random_r.c:388] libc-2.27.so
1.57% 123.3K 0.02% 1 [div.c:42 -> div.c:44] div
1.44% 116.0K 0.42% 19 [random_r.c:357 -> random_r.c:394] libc-2.27.so
Committer testing:
From second exapmple onwards slightly edited for brevity:
# perf report --total-cycles --percent-limit 2 --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 6M of event 'cycles'
# Event count (approx.): 6299936
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
# ............... .............. ........... .......... ...................................................................... ....................
#
2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux]
#
# (Tip: Create an archive with symtabs to analyse on other machine: perf archive)
#
# perf report --total-cycles --percent-limit 1 --stdio
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux]
1.75% 1.3M 8.34% 65.5K [memset-vec-unaligned-erms.S:147 -> memset-vec-unaligned-erms.S:151] libc-2.29.so
#
# perf report --total-cycles --percent-limit 0.7 --stdio
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux]
1.75% 1.3M 8.34% 65.5K [memset-vec-unaligned-erms.S:147 -> memset-vec-unaligned-erms.S:151] libc-2.29.so
0.72% 544.5K 0.03% 230 [entry_64.S:657 -> entry_64.S:662] [kernel.vmlinux]
#
-------------------------------------------
It only shows the entries which 'Sampled Cycles%' > 1%.
v7:
---
No functional change. Only fix the conflict issue because
previous patches are changed.
v6:
---
No functional change. Only fix the conflict issue because
previous patches are changed.
v5:
---
No functional change. Only fix the conflict issue because
previous patches are changed.
v4:
---
No functional change. Only fix the build issue because
previous patches are changed.
Signed-off-by: Jin Yao <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It would be useful to support sorting for all blocks by the sampled
cycles percent per block. This is useful to concentrate on the globally
hottest blocks.
This patch implements a new option "--total-cycles" which sorts all
blocks by 'Sampled Cycles%'. The 'Sampled Cycles%' is the percent:
percent = block sampled cycles aggregation / total sampled cycles
Note that, this patch only supports "--stdio" mode.
For example,
# perf record -b ./div
# perf report --total-cycles --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 2M of event 'cycles'
# Event count (approx.): 2753248
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
# ............... .............. ........... .......... ................................................ .................
#
26.04% 2.8M 0.40% 18 [div.c:42 -> div.c:39] div
15.17% 1.2M 0.16% 7 [random_r.c:357 -> random_r.c:380] libc-2.27.so
5.11% 402.0K 0.04% 2 [div.c:27 -> div.c:28] div
4.87% 381.6K 0.04% 2 [random.c:288 -> random.c:291] libc-2.27.so
4.53% 381.0K 0.04% 2 [div.c:40 -> div.c:40] div
3.85% 300.9K 0.02% 1 [div.c:22 -> div.c:25] div
3.08% 241.1K 0.02% 1 [rand.c:26 -> rand.c:27] libc-2.27.so
3.06% 240.0K 0.02% 1 [random.c:291 -> random.c:291] libc-2.27.so
2.78% 215.7K 0.02% 1 [random.c:298 -> random.c:298] libc-2.27.so
2.52% 198.3K 0.02% 1 [random.c:293 -> random.c:293] libc-2.27.so
2.36% 184.8K 0.02% 1 [rand.c:28 -> rand.c:28] libc-2.27.so
2.33% 180.5K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so
2.28% 176.7K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so
2.20% 168.8K 0.02% 1 [rand@plt+0 -> rand@plt+0] div
1.98% 158.2K 0.02% 1 [random_r.c:388 -> random_r.c:388] libc-2.27.so
1.57% 123.3K 0.02% 1 [div.c:42 -> div.c:44] div
1.44% 116.0K 0.42% 19 [random_r.c:357 -> random_r.c:394] libc-2.27.so
0.25% 182.5K 0.02% 1 [random_r.c:388 -> random_r.c:391] libc-2.27.so
0.00% 48 1.07% 48 [x86_pmu_enable+284 -> x86_pmu_enable+298] [kernel.kallsyms]
0.00% 74 1.64% 74 [vm_mmap_pgoff+0 -> vm_mmap_pgoff+92] [kernel.kallsyms]
0.00% 73 1.62% 73 [vm_mmap+0 -> vm_mmap+48] [kernel.kallsyms]
0.00% 63 0.69% 31 [up_write+0 -> up_write+34] [kernel.kallsyms]
0.00% 13 0.29% 13 [setup_arg_pages+396 -> setup_arg_pages+413] [kernel.kallsyms]
0.00% 3 0.07% 3 [setup_arg_pages+418 -> setup_arg_pages+450] [kernel.kallsyms]
0.00% 616 6.84% 308 [security_mmap_file+0 -> security_mmap_file+72] [kernel.kallsyms]
0.00% 23 0.51% 23 [security_mmap_file+77 -> security_mmap_file+87] [kernel.kallsyms]
0.00% 4 0.02% 1 [sched_clock+0 -> sched_clock+4] [kernel.kallsyms]
0.00% 4 0.02% 1 [sched_clock+9 -> sched_clock+12] [kernel.kallsyms]
0.00% 1 0.02% 1 [rcu_nmi_exit+0 -> rcu_nmi_exit+9] [kernel.kallsyms]
Committer testing:
This should provide material for hours of endless joy, both from looking
for suspicious things in the implementation of this patch, such as the
top one:
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux]
As well from things that look legit:
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
0.16% 123.0K 0.60% 4.7K [nospec-branch.h:265 -> nospec-branch.h:278] [kernel.vmlinux]
:-)
Very short system wide taken branches session:
# perf record -h -b
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-b, --branch-any sample any taken branches
#
# perf record -b
^C[ perf record: Woken up 595 times to write data ]
[ perf record: Captured and wrote 156.672 MB perf.data (196873 samples) ]
#
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY
#
# perf report --total-cycles --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 6M of event 'cycles'
# Event count (approx.): 6299936
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
# ............... .............. ........... .......... ...................................................................... ....................
#
2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux]
1.75% 1.3M 8.34% 65.5K [memset-vec-unaligned-erms.S:147 -> memset-vec-unaligned-erms.S:151] libc-2.29.so
0.72% 544.5K 0.03% 230 [entry_64.S:657 -> entry_64.S:662] [kernel.vmlinux]
0.56% 541.8K 0.09% 672 [compiler.h:199 -> common.c:300] [kernel.vmlinux]
0.39% 293.2K 0.01% 104 [list_debug.c:43 -> list_debug.c:61] [kernel.vmlinux]
0.36% 278.6K 0.03% 272 [entry_64.S:1289 -> entry_64.S:1308] [kernel.vmlinux]
0.30% 260.8K 0.07% 564 [clear_page_64.S:47 -> clear_page_64.S:50] [kernel.vmlinux]
0.28% 215.3K 0.05% 369 [traps.c:623 -> traps.c:628] [kernel.vmlinux]
0.23% 178.1K 0.04% 278 [entry_64.S:271 -> entry_64.S:275] [kernel.vmlinux]
0.20% 152.6K 0.09% 706 [paravirt.c:177 -> paravirt.c:179] [kernel.vmlinux]
0.20% 155.8K 0.05% 373 [entry_64.S:153 -> entry_64.S:175] [kernel.vmlinux]
0.18% 136.6K 0.03% 222 [msr.h:105 -> msr.h:166] [kernel.vmlinux]
0.16% 123.0K 0.60% 4.7K [nospec-branch.h:265 -> nospec-branch.h:278] [kernel.vmlinux]
0.16% 118.3K 0.01% 44 [entry_64.S:632 -> entry_64.S:657] [kernel.vmlinux]
0.14% 104.5K 0.00% 28 [rwsem.c:1541 -> rwsem.c:1544] [kernel.vmlinux]
0.13% 99.2K 0.01% 53 [spinlock.c:150 -> spinlock.c:152] [kernel.vmlinux]
0.13% 95.5K 0.00% 35 [swap.c:456 -> swap.c:471] [kernel.vmlinux]
0.12% 96.2K 0.05% 407 [copy_user_64.S:175 -> copy_user_64.S:209] [kernel.vmlinux]
0.11% 85.9K 0.00% 31 [swap.c:400 -> page-flags.h:188] [kernel.vmlinux]
0.10% 73.0K 0.01% 52 [paravirt.h:763 -> list.h:131] [kernel.vmlinux]
0.07% 56.2K 0.03% 214 [filemap.c:1524 -> filemap.c:1557] [kernel.vmlinux]
0.07% 54.2K 0.02% 145 [memory.c:1032 -> memory.c:1049] [kernel.vmlinux]
0.07% 50.3K 0.00% 39 [mmzone.c:49 -> mmzone.c:69] [kernel.vmlinux]
0.06% 48.3K 0.01% 40 [paravirt.h:768 -> page_alloc.c:3304] [kernel.vmlinux]
0.06% 46.7K 0.02% 155 [memory.c:1032 -> memory.c:1056] [kernel.vmlinux]
0.06% 46.9K 0.01% 103 [swap.c:867 -> swap.c:902] [kernel.vmlinux]
0.06% 47.8K 0.00% 34 [entry_64.S:1201 -> entry_64.S:1202] [kernel.vmlinux]
-----------------------------------------------------------
v7:
---
Use use_browser in report__browse_block_hists for supporting
stdio and potential tui mode.
v6:
---
Create report__browse_block_hists in block-info.c (codes are
moved from builtin-report.c). It's called from
perf_evlist__tty_browse_hists.
v5:
---
1. Move all block functions to block-info.c
2. Move the code of setting ms in block hist_entry to
other patch.
v4:
---
1. Use new option '--total-cycles' to replace
'-s total_cycles' in v3.
2. Move block info collection out of block info
printing.
v3:
---
1. Use common function block_info__process_sym to
process the blocks per symbol.
2. Remove the nasty hack for skipping calculation
of column length
3. Some minor cleanup
Signed-off-by: Jin Yao <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch provides helper routines to support new columns for block
info output.
The new columns are:
Sampled Cycles%
Sampled Cycles
Avg Cycles%
Avg Cycles
[Program Block Range]
Shared Object
v5:
---
1. Move more block related functions from builtin-report.c to
block-info.c
2. Set ms (map+sym) in block hist_entry. Because this info
is needed for reporting the block range (i.e. source line)
Committer notes:
Remove unused set_fmt() function, some build were not completing with:
util/block-info.c:396:20: error: unused function 'set_fmt' [-Werror,-Wunused-function]
static inline void set_fmt(struct block_fmt *block_fmt,
^
1 error generated.
Signed-off-by: Jin Yao <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for v5.5 from Shuah Khan:
"This cpupower update for Linux 5.5-rc1 consists of bug fixes and
improvements to make it more accurate by removing the userspace
to kernel transition and read_msr initiated IPI delays."
* tag 'linux-cpupower-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: ToDo: Update ToDo with ideas for per_cpu_schedule handling
cpupower: mperf_monitor: Update cpupower to use the RDPRU instruction
cpupower: mperf_monitor: Introduce per_cpu_schedule flag
cpupower: Move needs_root variable into a sub-struct
cpupower : Handle set and info subcommands correctly
tools/power/cpupower: Fix initializer override in hsw_ext_cstates
|
|
We can get the per sample cycles by hist__account_cycles(). It's also
useful to know the total cycles of all samples in order to get the
cycles coverage for a single program block in further. For example:
coverage = per block sampled cycles / total sampled cycles
This patch creates a new argument 'total_cycles' in hist__account_cycles(),
which will be added with the cycles of each sample.
Signed-off-by: Jin Yao <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We have already implemented some block-info related functions.
Now it's time to do some cleanup, refactoring and move the
functions and structures to new block-info.h/block-info.c.
v4:
---
Move code for skipping column length calculation to patch:
'perf diff: Don't use hack to skip column length calculation'
v3:
---
1. Rename the patch title
2. Rename from block.h/block.c to block-info.h/block-info.c
3. Move more common part to block-info, such as
block_info__process_sym.
4. Remove the nasty hack for skipping calculation of column
length
Signed-off-by: Jin Yao <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Previously we use a nasty hack to skip the hists__calc_col_len for block
since this function is not very suitable for block column length
calculation.
This patch removes the hack code and add a check at the entry of
hists__calc_col_len to skip for block case.
Signed-off-by: Jin Yao <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The test case 'Read backward ring buffer' failed on 32-bit architectures
which were found by LKFT perf testing. The test failed on arm32 x15
device, qemu_arm32, qemu_i386, and found intermittent failure on i386;
the failure log is as below:
50: Read backward ring buffer :
--- start ---
test child forked, pid 510
Using CPUID GenuineIntel-6-9E-9
mmap size 1052672B
mmap size 8192B
Finished reading overwrite ring buffer: rewind
free(): invalid next size (fast)
test child interrupted
---- end ----
Read backward ring buffer: FAILED!
The log hints there have issue for memory usage, thus free() reports
error 'invalid next size' and directly exit for the case. Finally, this
issue is root caused as out of bounds memory access for the data array
'evsel->id'.
The backward ring buffer test invokes do_test() twice. 'evsel->id' is
allocated at the first call with the flow:
test__backward_ring_buffer()
`-> do_test()
`-> evlist__mmap()
`-> evlist__mmap_ex()
`-> perf_evsel__alloc_id()
So 'evsel->id' is allocated with one item, and it will be used in
function perf_evlist__id_add():
evsel->id[0] = id
evsel->ids = 1
At the second call for do_test(), it skips to initialize 'evsel->id'
and reuses the array which is allocated in the first call. But
'evsel->ids' contains the stale value. Thus:
evsel->id[1] = id -> out of bound access
evsel->ids = 2
To fix this issue, we will use evlist__open() and evlist__close() pair
functions to prepare and cleanup context for evlist; so 'evsel->id' and
'evsel->ids' can be initialized properly when invoke do_test() and avoid
the out of bounds memory access.
Fixes: ee74701ed8ad ("perf tests: Add test to check backward ring buffer")
Signed-off-by: Leo Yan <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naresh Kamboju <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Cc: [email protected] # v4.10+
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The patch adds a new option to limit the output file size, then based on
it, we can create a wrapper of the perf command that uses the option to
avoid exhausting the disk space by the unconscious user.
In order to make the perf.data parsable, we just limit the sample data
size, since the perf.data consists of many headers and sample data and
other data, the actual size of the recorded file will bigger than the
setting value.
Testing it:
# ./perf record -a -g --max-size=10M
Couldn't synthesize bpf events.
[ perf record: perf size limit reached (10249 KB), stopping session ]
[ perf record: Woken up 32 times to write data ]
[ perf record: Captured and wrote 10.133 MB perf.data (71964 samples) ]
# ls -lh perf.data
-rw------- 1 root root 11M Oct 22 14:32 perf.data
# ./perf record -a -g --max-size=10K
[ perf record: perf size limit reached (10 KB), stopping session ]
Couldn't synthesize bpf events.
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 1.546 MB perf.data (69 samples) ]
# ls -l perf.data
-rw------- 1 root root 1626952 Oct 22 14:36 perf.data
Committer notes:
Fixed the build in multiple distros by using PRIu64 to print u64 struct
members, fixing this:
builtin-record.c: In function 'record__write':
builtin-record.c:150:5: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format=]
rec->bytes_written >> 10);
^
CC /tmp/build/pe
Signed-off-by: Jiwei Sun <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Richard Danter <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Since debuginfo__find_probes() callback function can be called with the
location which already passed, the callback function must filter out
such overlapped locations.
add_probe_trace_event() has already done it by commit 1a375ae7659a
("perf probe: Skip same probe address for a given line"), but
add_available_vars() doesn't. Thus perf probe -v shows same address
repeatedly as below:
# perf probe -V vfs_read:18
Available variables at vfs_read:18
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+226>
char* buf
loff_t* pos
ssize_t ret
struct file* file
With this fix, perf probe -V shows it correctly:
# perf probe -V vfs_read:18
Available variables at vfs_read:18
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+226>
char* buf
loff_t* pos
ssize_t ret
struct file* file
Fixes: cf6eb489e5c0 ("perf probe: Show accessible local variables")
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/157241938927.32002.4026859017790562751.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix to show calling lines of inlined functions (where an inline function
is called).
die_walk_lines() filtered out the lines inside inlined functions based
on the address. However this also filtered out the lines which call
those inlined functions from the target function.
To solve this issue, check the call_file and call_line attributes and do
not filter out if it matches to the line information.
Without this fix, perf probe -L doesn't show some lines correctly.
(don't see the lines after 17)
# perf probe -L vfs_read
<vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0>
0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
1 {
2 ssize_t ret;
4 if (!(file->f_mode & FMODE_READ))
return -EBADF;
6 if (!(file->f_mode & FMODE_CAN_READ))
return -EINVAL;
8 if (unlikely(!access_ok(buf, count)))
return -EFAULT;
11 ret = rw_verify_area(READ, file, pos, count);
12 if (!ret) {
13 if (count > MAX_RW_COUNT)
count = MAX_RW_COUNT;
15 ret = __vfs_read(file, buf, count, pos);
16 if (ret > 0) {
fsnotify_access(file);
add_rchar(current, ret);
}
With this fix:
# perf probe -L vfs_read
<vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0>
0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
1 {
2 ssize_t ret;
4 if (!(file->f_mode & FMODE_READ))
return -EBADF;
6 if (!(file->f_mode & FMODE_CAN_READ))
return -EINVAL;
8 if (unlikely(!access_ok(buf, count)))
return -EFAULT;
11 ret = rw_verify_area(READ, file, pos, count);
12 if (!ret) {
13 if (count > MAX_RW_COUNT)
count = MAX_RW_COUNT;
15 ret = __vfs_read(file, buf, count, pos);
16 if (ret > 0) {
17 fsnotify_access(file);
18 add_rchar(current, ret);
}
20 inc_syscr(current);
}
Fixes: 4cc9cec636e7 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/157241937995.32002.17899884017011512577.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Filter out instances except for inlined_subroutine and subprogram DIE in
die_walk_instances() and die_is_func_instance().
This fixes an issue that perf probe sets some probes on calling address
instead of a target function itself.
When perf probe walks on instances of an abstruct origin (a kind of
function prototype of inlined function), die_walk_instances() can also
pass a GNU_call_site (a GNU extension for call site) to callback. Since
it is not an inlined instance of target function, we have to filter out
when searching a probe point.
Without this patch, perf probe sets probes on call site address too.This
can happen on some function which is marked "inlined", but has actual
symbol. (I'm not sure why GCC mark it "inlined"):
# perf probe -D vfs_read
p:probe/vfs_read _text+2500017
p:probe/vfs_read_1 _text+2499468
p:probe/vfs_read_2 _text+2499563
p:probe/vfs_read_3 _text+2498876
p:probe/vfs_read_4 _text+2498512
p:probe/vfs_read_5 _text+2498627
With this patch:
Slightly different results, similar tho:
# perf probe -D vfs_read
p:probe/vfs_read _text+2498512
Committer testing:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
Before:
# perf probe -D vfs_read
p:probe/vfs_read _text+3131557
p:probe/vfs_read_1 _text+3130975
p:probe/vfs_read_2 _text+3131047
p:probe/vfs_read_3 _text+3130380
p:probe/vfs_read_4 _text+3130000
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
#
After:
# perf probe -D vfs_read
p:probe/vfs_read _text+3130000
#
Fixes: db0d2c6420ee ("perf probe: Search concrete out-of-line instances")
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/157241937063.32002.11024544873990816590.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Skip end-of-sequence and non-statement lines while walking through lines
list.
The "end-of-sequence" line information means:
"the current address is that of the first byte after the
end of a sequence of target machine instructions."
(DWARF version 4 spec 6.2.2)
This actually means out of scope and we can not probe on it.
On the other hand, the statement lines (is_stmt) means:
"the current instruction is a recommended breakpoint location.
A recommended breakpoint location is intended to “represent”
a line, a statement and/or a semantically distinct subpart
of a statement."
(DWARF version 4 spec 6.2.2)
So, non-statement line info also should be skipped.
These can reduce unneeded probe points and also avoid an error.
E.g. without this patch:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new events:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_3 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_4 (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask_4 -aR sleep 1
#
This puts 5 probes on one line, but acutally it's not inlined function.
This is because there are many non statement instructions at the
function prologue.
With this patch:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
#
Now perf-probe skips unneeded addresses.
Committer testing:
Slightly different results, but similar:
Before:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
#
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new events:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask_2 -aR sleep 1
#
After:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c)
#
Fixes: 4cc9cec636e7 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/157241936090.32002.12156347518596111660.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Make find_best_scope() returns innermost DIE at given address if there
is no best matched scope DIE. Since Gcc sometimes generates intuitively
strange line info which is out of inlined function address range, we
need this fixup.
Without this, sometimes perf probe failed to probe on a line inside an
inlined function:
# perf probe -D ksys_open:3
Failed to find scope of probe point.
Error: Failed to add events.
With this fix, 'perf probe' can probe it:
# perf probe -D ksys_open:3
p:probe/ksys_open _text+25707308
p:probe/ksys_open_1 _text+25710596
p:probe/ksys_open_2 _text+25711114
p:probe/ksys_open_3 _text+25711343
p:probe/ksys_open_4 _text+25714058
p:probe/ksys_open_5 _text+2819653
p:probe/ksys_open_6 _text+2819701
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Tom Zanussi <[email protected]>
Link: http://lore.kernel.org/lkml/157291300887.19771.14936015360963292236.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix expand_tabs that copies the source lines '\0' and then appends
another '\0' at a potentially out of bounds address.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To reduce boilerplate in some places.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Its sufficient to check if map->groups is NULL before using it to get
->machine value.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a parse_events_term deep delete function so that owned strings and
arrays are freed.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Avoid a memory leak when the configuration fails.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Yyabort doesn't destruct inputs and so this must be done manually before
using yyabort.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If parsing fails then destructors are ran to clean the up the stack.
Rename the head union member to make the term and evlist use cases more
distinct, this simplifies matching the correct destructor.
Committer notes:
Jiri: "Nice did not know about this.. looks like it's been in bison for some time, right?"
Ian: "Looks like it wasn't in Bison 1 but in Bison 2, we're at Bison 3 and
Bison 2 is > 14 years old:
https://web.archive.org/web/20050924004158/http://www.gnu.org/software/bison/manual/html_mono/bison.html#Destructor-Decl"
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
AMD 2nd generation EPYC processors support the UMIP (User-Mode
Instruction Prevention) feature. So, rename X86_INTEL_UMIP to
generic X86_UMIP and modify the text to cover both Intel and AMD.
[ bp: take of the disabled-features.h copy in tools/ too. ]
Signed-off-by: Babu Moger <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ricardo Neri <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "[email protected]" <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Added the following traceroute tests.
IPV6:
Verify that in this scenario
------------------------ N2
| |
------ ------ N3 ----
| R1 | | R2 |------|H2|
------ ------ ----
| |
------------------------ N1
|
----
|H1|
----
where H1's default route goes through R1 and R1's default route goes
through R2 over N2, traceroute6 from H1 to H2 reports R2's address
on N2 and not N1.
IPV4:
Verify that traceroute from H1 to H2 shows 1.0.1.1 in this scenario
1.0.3.1/24
---- 1.0.1.3/24 1.0.1.1/24 ---- 1.0.2.1/24 1.0.2.4/24 ----
|H1|--------------------------|R1|--------------------------|H2|
---- N1 ---- N2 ----
where net.ipv4.icmp_errors_use_inbound_ifaddr is set on R1 and
1.0.3.1/24 and 1.0.1.1/24 are respectively R1's primary and secondary
address on N1.
v2: fixed some typos, and have bridge in R1 instead of R2 in IPV6 test.
Signed-off-by: Francesco Ruggeri <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a test which spawns 16 threads and performs concurrent
send and recv calls on the same socket.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Streamline BPF_CORE_READ_BITFIELD_PROBED interface to follow
BPF_CORE_READ_BITFIELD (direct) and BPF_CORE_READ, in general, i.e., just
return read result or 0, if underlying bpf_probe_read() failed.
In practice, real applications rarely check bpf_probe_read() result, because
it has to always work or otherwise it's a bug. So propagating internal
bpf_probe_read() error from this macro hurts usability without providing real
benefits in practice. This patch fixes the issue and simplifies usage,
noticeable even in selftest itself.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
As part of 42765ede5c54 ("selftests/bpf: Remove too strict field offset relo
test cases"), few ints relocations negative (supposed to fail) tests were
removed, but not completely. Due to them being negative, some leftovers in
prog_tests/core_reloc.c went unnoticed. Clean them up.
Fixes: 42765ede5c54 ("selftests/bpf: Remove too strict field offset relo test cases")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Merge more fixes from Andrew Morton:
"17 fixes"
Mostly mm fixes and one ocfs2 locking fix.
* emailed patches from Andrew Morton <[email protected]>:
mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges
mm/memory_hotplug: fix updating the node span
scripts/gdb: fix debugging modules compiled with hot/cold partitioning
mm: slab: make page_cgroup_ino() to recognize non-compound slab pages properly
MAINTAINERS: update information for "MEMORY MANAGEMENT"
dump_stack: avoid the livelock of the dump_lock
zswap: add Vitaly to the maintainers list
mm/page_alloc.c: ratelimit allocation failure warnings more aggressively
mm/khugepaged: fix might_sleep() warn with CONFIG_HIGHPTE=y
mm, vmstat: reduce zone->lock holding time by /proc/pagetypeinfo
mm, vmstat: hide /proc/pagetypeinfo from normal users
mm/mmu_notifiers: use the right return code for WARN_ON
ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()
mm: thp: handle page cache THP correctly in PageTransCompoundMap
mm, meminit: recalculate pcpu batch and high limits after init completes
mm/gup_benchmark: fix MAP_HUGETLB case
mm: memcontrol: fix NULL-ptr deref in percpu stats flush
|
|
Added tests for u8/u32 clear value, u8/16 retain value, u16/32 invert value,
u8/u16/u32 preserve value and test for negative offsets.
Signed-off-by: Roman Mashak <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The netdevsim object is reused by all the tests, but the resource
tests puts it into a broken state (failed reload in a different
namespace). Make sure it's fixed up at the end of that test
otherwise subsequent tests fail.
Fixes: b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources")
Signed-off-by: Jakub Kicinski <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Make it easier to release memory associated with parse event terms by
duplicating the string for the config name and ensuring the val string
is a duplicate.
Currently the parser may memory leak terms and this is addressed in a
later patch.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Parse event error handling may overwrite one error string with another
creating memory leaks. Introduce a helper routine that warns about
multiple error messages as well as avoiding the memory leak.
A reproduction of this problem can be seen with:
perf stat -e c/c/
After this change this produces:
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
create_gcov (refer to the autofdo example in tools/perf/Documentation/intel-pt.txt)
now needs the evsels to read the perf.data file. So don't strip them.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently when cross compiling perf tool for ARM64 on my x86 machine I
get this error:
arch/arm64/util/sym-handling.c:9:10: fatal error: gelf.h: No such file or directory
#include <gelf.h>
For the build, libelf is reported off:
Auto-detecting system features:
...
... libelf: [ OFF ]
Indeed, test-libelf is not built successfully:
more ./build/feature/test-libelf.make.output
test-libelf.c:2:10: fatal error: libelf.h: No such file or directory
#include <libelf.h>
^~~~~~~~~~
compilation terminated.
I have no such problems natively compiling on ARM64, and I did not
previously have this issue for cross compiling. Fix by relocating the
gelf.h include.
Signed-off-by: John Garry <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding new --per-node option to aggregate counts per NUMA
nodes for system-wide mode measurements.
You can specify --per-node in live mode:
# perf stat -a -I 1000 -e cycles --per-node
# time node cpus counts unit events
1.000542550 N0 20 6,202,097 cycles
1.000542550 N1 20 639,559 cycles
2.002040063 N0 20 7,412,495 cycles
2.002040063 N1 20 2,185,577 cycles
3.003451699 N0 20 6,508,917 cycles
3.003451699 N1 20 765,607 cycles
...
Or in the record/report stat session:
# perf stat record -a -I 1000 -e cycles
# time counts unit events
1.000536937 10,008,468 cycles
2.002090152 9,578,539 cycles
3.003625233 7,647,869 cycles
4.005135036 7,032,086 cycles
^C 4.340902364 3,923,893 cycles
# perf stat report --per-node
# time node cpus counts unit events
1.000536937 N0 20 9,355,086 cycles
1.000536937 N1 20 653,382 cycles
2.002090152 N0 20 7,712,838 cycles
2.002090152 N1 20 1,865,701 cycles
3.003625233 N0 20 6,604,441 cycles
3.003625233 N1 20 1,043,428 cycles
4.005135036 N0 20 6,350,522 cycles
4.005135036 N1 20 681,564 cycles
4.340902364 N0 20 3,403,188 cycles
4.340902364 N1 20 520,705 cycles
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To speed up cpu to node lookup, add perf_env__numa_node(), that creates
cpu array on the first lookup, that holds numa nodes for each stored
cpu.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
New Metrics:
- DSB_Switches: fraction of cycles CPU was stalled due to switches from DSB to MITE pipeline [all]
- L2_Evictions_{Silent|NonSilent}_PKI: L2 {silent|non silent} ecivtions rate per Kilo instruction [SKX+]
- IpFarBranch - Instructions per Far Branch
Other Enhancements & fixes:
- KBLR/CFL & CLX move to separate columns (no column sharing via if #model)
- Re-organized/renamed Metric Group
Signed-off-by: Haiyan Song <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Update CascadelakeX events to v1.05.
Other changes:
remove duplicated and without description events.
Signed-off-by: Haiyan Song <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If event parsing fails the event list is leaked, instead splice the list
onto the out result and let the caller cleanup.
An example input for parse_events found by libFuzzer that reproduces
this memory leak is 'm{'.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When a 'make DEBUG=1' build is done, the command parser is still built
with -O6 and is hard to step through, fix it making it use -O0 in that
case.
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: nd <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|