| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
From the syscall_fmts->arg entries for formatting strace-like syscalls.
This is when resolving the string "whence" on a filter expression for
the syscalls:sys_enter_lseek:
Breakpoint 3, perf_evsel__syscall_arg_fmt (evsel=0xc91ed0, arg=0x7fffffff7cd0 "whence") at builtin-trace.c:3626
3626 {
(gdb) n
3628 struct syscall_arg_fmt *fmt = __evsel__syscall_arg_fmt(evsel);
(gdb) n
3630 if (evsel->tp_format == NULL || fmt == NULL)
(gdb) n
3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt)
(gdb) n
3634 if (strcmp(field->name, arg) == 0)
(gdb) p field->name
$3 = 0xc945e0 "__syscall_nr"
(gdb) n
3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt)
(gdb) p *fmt
$4 = {scnprintf = 0x0, strtoul = 0x0, mask_val = 0x0, parm = 0x0, name = 0x0, nr_entries = 0, show_zero = false}
(gdb) n
3634 if (strcmp(field->name, arg) == 0)
(gdb) p field->name
$5 = 0xc94690 "fd"
(gdb) n
3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt)
(gdb) n
3634 if (strcmp(field->name, arg) == 0)
(gdb) n
3633 for (field = evsel->tp_format->format.fields; field; field = field->next, ++fmt)
(gdb) n
3634 if (strcmp(field->name, arg) == 0)
(gdb) p *fmt
$9 = {scnprintf = 0x489be2 <syscall_arg__scnprintf_strarray>, strtoul = 0x0, mask_val = 0x0, parm = 0xa2da80 <strarray.whences>, name = 0x0,
nr_entries = 0, show_zero = false}
(gdb) p field->name
$10 = 0xc947b0 "whence"
(gdb) p fmt->parm
$11 = (void *) 0xa2da80 <strarray.whences>
(gdb) p *(struct strarray *)fmt->parm
$12 = {offset = 0, nr_entries = 5, prefix = 0x724d37 "SEEK_", entries = 0xa2da40 <whences>}
(gdb) p (struct strarray *)fmt->parm)->entries
Junk after end of expression.
(gdb) p ((struct strarray *)fmt->parm)->entries
$13 = (const char **) 0xa2da40 <whences>
(gdb) p ((struct strarray *)fmt->parm)->entries[0]
$14 = 0x724d21 "SET"
(gdb) p ((struct strarray *)fmt->parm)->entries[1]
$15 = 0x724d25 "CUR"
(gdb) p ((struct strarray *)fmt->parm)->entries[2]
$16 = 0x724d29 "END"
(gdb) p ((struct strarray *)fmt->parm)->entries[2]
$17 = 0x724d29 "END"
(gdb) p ((struct strarray *)fmt->parm)->entries[3]
$18 = 0x724d2d "DATA"
(gdb) p ((struct strarray *)fmt->parm)->entries[4]
$19 = 0x724d32 "HOLE"
(gdb)
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For kernel logging macro, pr_warning is completely removed and
replaced by pr_warn, using pr_warn in tools lib api for symmetry
to kernel logging macro, then we could drop pr_warning in the
whole linux code.
Changing __pr_warning to __pr_warn to be consistent.
Link: http://lkml.kernel.org/r/[email protected]
To: [email protected]
Cc: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Kefeng Wang <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
|
|
For syscalls we need to cache the 'syscall_id' and 'ret' field offsets
but as well have a pointer to the syscall_fmt_arg array for the fields,
so that we can expand strings in filter expressions, so introduce
a 'struct evsel_trace' to have in evsel->priv that allows for that.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Next step will be to have a 'struct evsel_trace' to allow for handling
the syscalls tracepoints via the strace-like code while reusing parts of
that code with the other tracepoints, where we don't have things like
the 'syscall_nr' or 'ret' ((raw_)?syscalls:sys_{enter,exit}(_SYSCALL)?)
args that we want to cache offsets and have been using evsel->priv for
that, while for the other tracepoints we'll have just an array of
'struct syscall_arg_fmt' (i.e. ->scnprint() for number->string and
->strtoul() string->number conversions and other state those functions
need).
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We're using evsel->priv in syscalls:sys_{enter,exit}_SYSCALL and in
raw_syscalls:sys_{enter,exit} to cache the offset of the common fields,
the multiplexor id/syscall_id in the sys_enter case and syscall_id + ret
for sys_exit.
And for the rest of the tracepoints we use it to have a syscall_arg_fmt
array to have scnprintf/strtoul for tracepoint args.
So we better clearly mark them with accessors so that we can move to
having a 'struct evsel_trace' struct for all 'perf trace' specific
evsel->priv usage.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
expression
It was there, but as pr_debug(), make it pr_err() so that we can see it
without -v:
# trace -e syscalls:*lseek --filter="whenc==SET" sleep 1
"whenc" not found in "syscalls:sys_enter_lseek", can't set filter "whenc==SET"
#
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Decode Xen and KVM's emulate-prefix signature by x86 insn decoder.
It is called "prefix" but actually not x86 instruction prefix, so
this adds insn.emulate_prefix_size field instead of reusing
insn.prefixes.
If x86 decoder finds a special sequence of instructions of
XEN_EMULATE_PREFIX and 'ud2a; .ascii "kvm"', it just counts the
length, set insn.emulate_prefix_size and fold it with the next
instruction. In other words, the signature and the next instruction
is treated as a single instruction.
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: [email protected]
Cc: Boris Ostrovsky <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: [email protected]
Cc: Randy Dunlap <[email protected]>
Link: https://lkml.kernel.org/r/156777564986.25081.4964537658500952557.stgit@devnote2
|
|
test_progs is much more sophisticated superset of tests compared to
test_libbpf.sh and test_libbpf_open. Remove test_libbpf.sh and
test_libbpf_open.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
test_queue_stack_map.h is used only from BPF programs. Thus it should be
part of progs/ subdir. An added benefit of moving it there is that new
TEST_RUNNER_DEFINE_RULES macro-rule will properly capture dependency on
this header for all BPF objects and trigger re-build, if it changes.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Define test runner generation meta-rule that codifies dependencies
between test runner, its tests, and its dependent BPF programs. Use that
for defining test_progs and test_maps test-runners. Also additionally define
2 flavors of test_progs:
- alu32, which builds BPF programs with 32-bit registers codegen;
- bpf_gcc, which build BPF programs using GCC, if it supports BPF target.
Overall, this is accomplished through $(eval)'ing a set of generic
rules, which defines Makefile targets dynamically at runtime. See
comments explaining the need for 2 $(evals), though.
For each test runner we have (test_maps and test_progs, currently), and,
optionally, their flavors, the logic of build process is modeled as
follows (using test_progs as an example):
- all BPF objects are in progs/:
- BPF object's .o file is built into output directory from
corresponding progs/.c file;
- all BPF objects in progs/*.c depend on all progs/*.h headers;
- all BPF objects depend on bpf_*.h helpers from libbpf (but not
libbpf archive). There is an extra rule to trigger bpf_helper_defs.h
(re-)build, if it's not present/outdated);
- build recipe for BPF object can be re-defined per test runner/flavor;
- test files are built from prog_tests/*.c:
- all such test file objects are built on individual file basis;
- currently, every single test file depends on all BPF object files;
this might be improved in follow up patches to do 1-to-1 dependency,
but allowing to customize this per each individual test;
- each test runner definition can specify a list of extra .c and .h
files to be built along test files and test runner binary; all such
headers are becoming automatic dependency of each test .c file;
- due to test files sometimes embedding (using .incbin assembly
directive) contents of some BPF objects at compilation time, which are
expected to be in CWD of compiler, compilation for test file object does
cd into test runner's output directory; to support this mode all the
include paths are turned into absolute paths using $(abspath) make
function;
- prog_tests/test.h is automatically (re-)generated with an entry for
each .c file in prog_tests/;
- final test runner binary is linked together from test object files and
extra object files, linking together libbpf's archive as well;
- it's possible to specify extra "resource" files/targets, which will be
copied into test runner output directory, if it differes from
Makefile-wide $(OUTPUT). This is used to ensure btf_dump test cases and
urandom_read binary is put into a test runner's CWD for tests to find
them in runtime.
For flavored test runners, their output directory is a subdirectory of
common Makefile-wide $(OUTPUT) directory with flavor name used as
subdirectory name.
BPF objects targets might be reused between different test runners, so
extra checks are employed to not double-define them. Similarly, we have
redefinition guards for output directories and test headers.
test_verifier follows slightly different patterns and is simple enough
to not justify generalizing TEST_RUNNER_DEFINE/TEST_RUNNER_DEFINE_RULES
further to accomodate these differences. Instead, rules for
test_verifier are minimized and simplified, while preserving correctness
of dependencies.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Currently it's impossible to do `make test_progs` and have only
test_progs be built, because all the binary targets are defined in terms
of $(OUTPUT)/<binary>, and $(OUTPUT) is absolute path to current
directory (or whatever gets overridden to by user).
This patch adds simple re-directing targets for all test targets making
it possible to do simple and nice `make test_progs` (and any other
target).
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Make test_maps use tests.h header format consistent with the one used by
test_progs, to facilitate unification.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
test_core_reloc_kernel test captures its own process name and validates
it as part of the test. Given extra "flavors" of test_progs, this break
for anything by default test_progs binary. Fix the test to cut out
flavor part of the process name.
Fixes: ee2eb063d330 ("selftests/bpf: Add BPF_CORE_READ and BPF_CORE_READ_STR_INTO macro tests")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
We are building a bunch of "flavors" of test_progs, e.g., w/ alu32 flag
for Clang when building BPF object. test_progs setup is relying on
having all the BPF object files and extra resources to be available in
current working directory, though. But we actually build all these files
into a separate sub-directory. Next set of patches establishes
convention of naming "flavored" test_progs (and test runner binaries in
general) as test_progs-flavor (e.g., test_progs-alu32), for each such
extra flavor. This patch teaches test_progs binary to automatically
detect its own extra flavor based on its argv[0], and if present, to
change current directory to a flavor-specific subdirectory.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
flow_dissector_reattach test changes the netns we run in but does not
restore it to the one we started in when finished. This interferes with
tests that run after it. Fix it by restoring the netns when done.
Fixes: f97eea1756f3 ("selftests/bpf: Check that flow dissector can be re-attached")
Reported-by: Alexei Starovoitov <[email protected]>
Reported-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Load basic cls_bpf program.
Load raw_tracepoint program and attach to kfree_skb raw tracepoint.
Trigger cls_bpf via prog_test_run.
At the end of test_run kernel will call kfree_skb
which will trigger trace_kfree_skb tracepoint.
Which will call our raw_tracepoint program.
Which will take that skb and will dump it into perf ring buffer.
Check that user space received correct packet.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Introduce new helper that reuses existing skb perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct sk_buff *' as tracepoint argument or
can walk other kernel data structures to skb pointer.
In order to do that teach verifier to resolve true C types
of bpf helpers into in-kernel BTF ids.
The type of kernel pointer passed by raw tracepoint into bpf
program will be tracked by the verifier all the way until
it's passed into helper function.
For example:
kfree_skb() kernel function calls trace_kfree_skb(skb, loc);
bpf programs receives that skb pointer and may eventually
pass it into bpf_skb_output() bpf helper which in-kernel is
implemented via bpf_skb_event_output() kernel function.
Its first argument in the kernel is 'struct sk_buff *'.
The verifier makes sure that types match all the way.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
It's a responsiblity of bpf program author to annotate the program
with SEC("tp_btf/name") where "name" is a valid raw tracepoint.
The libbpf will try to find "name" in vmlinux BTF and error out
in case vmlinux BTF is not available or "name" is not found.
If "name" is indeed a valid raw tracepoint then in-kernel BTF
will have "btf_trace_##name" typedef that points to function
prototype of that raw tracepoint. BTF description captures
exact argument the kernel C code is passing into raw tracepoint.
The kernel verifier will check the types while loading bpf program.
libbpf keeps BTF type id in expected_attach_type, but since
kernel ignores this attribute for tracing programs copy it
into attach_btf_id attribute before loading.
Later the kernel will use prog->attach_btf_id to select raw tracepoint
during bpf_raw_tracepoint_open syscall command.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add attach_btf_id attribute to prog_load command.
It's similar to existing expected_attach_type attribute which is
used in several cgroup based program types.
Unfortunately expected_attach_type is ignored for
tracing programs and cannot be reused for new purpose.
Hence introduce attach_btf_id to verify bpf programs against
given in-kernel BTF type id at load time.
It is strictly checked to be valid for raw_tp programs only.
In a later patches it will become:
btf_id == 0 semantics of existing raw_tp progs.
btd_id > 0 raw_tp with BTF and additional type safety.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Test that the fdinfo field of a pidfd referring to a dead process
correctly shows Pid: -1 and NSpid: -1.
Cc: Christian Kellner <[email protected]>
Cc: [email protected]
Reviewed-by: Christian Kellner <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Fix O= and KBUILD_OUTPUT handling for relative paths.
export KBUILD_OUTPUT=../kselftest_size
make TARGETS=size kselftest-all
or
make O=../kselftest_size TARGETS=size kselftest-all
In both of these cases, targets get built in ../kselftest_size which is
a one level up from the size test directory.
make[1]: Entering directory '/mnt/data/lkml/kselftest_size'
make --no-builtin-rules INSTALL_HDR_PATH=$BUILD/usr \
ARCH=x86 -C ../../.. headers_install
INSTALL ../kselftest_size/usr/include
gcc -static -ffreestanding -nostartfiles -s get_size.c -o ../kselftest_size/size/get_size
/usr/bin/ld: cannot open output file ../kselftest_size/size/get_size: No such file or directory
collect2: error: ld returned 1 exit status
make[3]: *** [../lib.mk:138: ../kselftest_size/size/get_size] Error 1
make[2]: *** [Makefile:143: all] Error 2
make[1]: *** [/mnt/data/lkml/linux_5.4/Makefile:1221: kselftest-all] Error 2
make[1]: Leaving directory '/mnt/data/lkml/kselftest_size'
make: *** [Makefile:179: sub-make] Error 2
Use abs_objtree exported by the main Makefile.
Reported-by: Tim Bird <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Tested-by: Tim Bird <[email protected]>
Acked-by: Tim Bird <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
The memory @orig_flags is allocated by strdup(), it is freed on the
normal path, but leak to free on the error path.
Fix this by adding free(orig_flags) on the error path.
Fixes: 0e11115644b3 ("perf kmem: Print gfp flags in human readable string")
Signed-off-by: Yunfeng Ye <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Feilong Lin <[email protected]>
Cc: Hu Shiyuan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Added TDC test cases for Ethernet LAYERED_OP operations:
- set single source Ethernet MAC
- set single destination Ethernet MAC
- set single invalid destination Ethernet MAC
- set Ethernet type
- invert source/destination/type fields
- add operation on Ethernet type field
Signed-off-by: Roman Mashak <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Recently couple of files that are write only were added to netdevsim
debugfs. Don't read these files and avoid error.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
|
|
Make sure BPF_PROG_TEST_RUN accepts tstamp and exports any
modifications that BPF program does.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a bunch of tests validating CO-RE is handling field existence
relocation. Relaxed CO-RE relocation mode is activated for these new
tests to prevent libbpf from rejecting BPF object for no-match
relocation, even though test BPF program is not going to use that
relocation, if field is missing.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add enum definition for Clang's __builtin_preserve_field_info()
second argument (info_kind). Currently only byte offset and existence
are supported. Corresponding Clang changes introducing this built-in can
be found at [0]
[0] https://reviews.llvm.org/D67980
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add support for BPF_FRK_EXISTS relocation kind to detect existence of
captured field in a destination BTF, allowing conditional logic to
handle incompatible differences between kernels.
Also introduce opt-in relaxed CO-RE relocation handling option, which
makes libbpf emit warning for failed relocations, but proceed with other
relocations. Instruction, for which relocation failed, is patched with
(u32)-1 value.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Refactor all the various bpf_object__open variations to ultimately
specify common bpf_object_open_opts struct. This makes it easy to keep
extending this common struct w/ extra parameters without having to
update all the legacy APIs.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
BTF offset reloc was generalized in recent Clang into field relocation,
capturing extra u32 field, specifying what aspect of captured field
needs to be relocated. This changes .BTF.ext's record size for this
relocation from 12 bytes to 16 bytes. Given these format changes
happened in Clang before official released version, it's ok to not
support outdated 12-byte record size w/o breaking ABI.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Pull virtio fixes from Michael Tsirkin:
"Some minor bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/test: stop device before reset
tools/virtio: xen stub
tools/virtio: more stubs
|
|
scnprintf/strtoul
Ended up only being useful when filtering multiple irq_vectors
tracepoints, as we end up having a tracepoint for each of the entries,
i.e.:
This will always come with the "RESCHEDULE_VECTOR" in the 'vector' arg:
# perf trace --max-events 8 -e irq_vectors:reschedule*
0.000 cc1/29067 irq_vectors:reschedule_entry(vector: RESCHEDULE)
0.004 cc1/29067 irq_vectors:reschedule_exit(vector: RESCHEDULE)
0.553 cc1/29067 irq_vectors:reschedule_entry(vector: RESCHEDULE)
0.556 cc1/29067 irq_vectors:reschedule_exit(vector: RESCHEDULE)
1.182 cc1/29067 irq_vectors:reschedule_entry(vector: RESCHEDULE)
1.185 cc1/29067 irq_vectors:reschedule_exit(vector: RESCHEDULE)
1.203 :29052/29052 irq_vectors:reschedule_entry(vector: RESCHEDULE)
1.206 :29052/29052 irq_vectors:reschedule_exit(vector: RESCHEDULE)
#
While filtering that value will produce nothing:
# perf trace --max-events 8 -e irq_vectors:reschedule* --filter="vector != RESCHEDULE"
^C#
Maybe it'll be useful for those other tracepoints:
# perf list irq_vectors:vector_*
List of pre-defined events (to be used in -e):
irq_vectors:vector_activate [Tracepoint event]
irq_vectors:vector_alloc [Tracepoint event]
irq_vectors:vector_alloc_managed [Tracepoint event]
irq_vectors:vector_clear [Tracepoint event]
irq_vectors:vector_config [Tracepoint event]
irq_vectors:vector_deactivate [Tracepoint event]
irq_vectors:vector_free_moved [Tracepoint event]
irq_vectors:vector_reserve [Tracepoint event]
irq_vectors:vector_reserve_managed [Tracepoint event]
irq_vectors:vector_setup [Tracepoint event]
irq_vectors:vector_teardown [Tracepoint event]
irq_vectors:vector_update [Tracepoint event]
#
But since we have it done, keep it.
This at least served to teach me that all those irq vectors have a entry
and an exit tracepoint that I can then use just like with
raw_syscalls:sys_{enter,exit}, i.e. pair them, use just a
trace__irq_vectors_entry() + trace__irq_vectors_exit() and use the
'vector' arg as I use the 'syscall id' one for syscalls.
Then the default for 'perf trace' will include irq_vectors in addition
to syscalls.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We need to wrap this autogenerated string array with the
strarray__scnprintf() formatter and the strarray__strotul() lookup
method, do it.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In some cases, like with x86 IRQ vectors, the common part in names is at
the end, so a suffix, add a scnprintf function for that.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
I.e. after running:
$ make -C tools/perf O=/tmp/build/perf
We end up with:
$ cat /tmp/build/perf/trace/beauty/generated/x86_arch_irq_vectors_array.c
static const char *x86_irq_vectors[] = {
[0x02] = "NMI",
[0x12] = "MCE",
[0x20] = "IRQ_MOVE_CLEANUP",
[0x80] = "IA32_SYSCALL",
[0xec] = "LOCAL_TIMER",
[0xed] = "HYPERV_STIMER0",
[0xee] = "HYPERV_REENLIGHTENMENT",
[0xef] = "MANAGED_IRQ_SHUTDOWN",
[0xf0] = "POSTED_INTR_NESTED",
[0xf1] = "POSTED_INTR_WAKEUP",
[0xf2] = "POSTED_INTR",
[0xf3] = "HYPERVISOR_CALLBACK",
[0xf4] = "DEFERRED_ERROR",
[0xf6] = "IRQ_WORK",
[0xf7] = "X86_PLATFORM_IPI",
[0xf8] = "REBOOT",
[0xf9] = "THRESHOLD_APIC",
[0xfa] = "THERMAL_APIC",
[0xfb] = "CALL_FUNCTION_SINGLE",
[0xfc] = "CALL_FUNCTION",
[0xfd] = "RESCHEDULE",
[0xfe] = "ERROR_APIC",
[0xff] = "SPURIOUS_APIC",
};
$
Now its just a matter of using it, associating it to tracepoint arguments named
'vector', all of which can be correctly used with this table, for int args.
At some point we should move tools/perf/trace/beauty to tools/beauty/,
so that it can be used more generally and even made available externally
like libbpf, libperf, libtraceevent, etc.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We'll wire this up with the 'vector' arg in irq_vectors:*, etc:
Just run it straight away and check what it produces:
$ tools/perf/trace/beauty/tracepoints/x86_irq_vectors.sh
static const char *x86_irq_vectors[] = {
[0x02] = "NMI",
[0x12] = "MCE",
[0x20] = "IRQ_MOVE_CLEANUP",
[0x80] = "IA32_SYSCALL",
[0xec] = "LOCAL_TIMER",
[0xed] = "HYPERV_STIMER0",
[0xee] = "HYPERV_REENLIGHTENMENT",
[0xef] = "MANAGED_IRQ_SHUTDOWN",
[0xf0] = "POSTED_INTR_NESTED",
[0xf1] = "POSTED_INTR_WAKEUP",
[0xf2] = "POSTED_INTR",
[0xf3] = "HYPERVISOR_CALLBACK",
[0xf4] = "DEFERRED_ERROR",
[0xf6] = "IRQ_WORK",
[0xf7] = "X86_PLATFORM_IPI",
[0xf8] = "REBOOT",
[0xf9] = "THRESHOLD_APIC",
[0xfa] = "THERMAL_APIC",
[0xfb] = "CALL_FUNCTION_SINGLE",
[0xfc] = "CALL_FUNCTION",
[0xfd] = "RESCHEDULE",
[0xfe] = "ERROR_APIC",
[0xff] = "SPURIOUS_APIC",
};
$
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We'll use it to generate a table and then convert the irq_vectors:*
tracepoint 'vector' arg in things like perf trace, script, etc.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add some more missing events.
A trivial typo is also fixed.
Signed-off-by: John Garry <[email protected]>
Reviewed-by: Shaokun Zhang <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add some more missing events.
Signed-off-by: John Garry <[email protected]>
Reviewed-by: Shaokun Zhang <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add some more missing events.
Signed-off-by: John Garry <[email protected]>
Reviewed-by: Shaokun Zhang <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The "EventName" for the DDRC precharge command event is incorrect, so
fix it.
Fixes: 57cc732479ba ("perf jevents: Add support for Hisi hip08 DDRC PMU aliasing")
Signed-off-by: John Garry <[email protected]>
Reviewed-by: Shaokun Zhang <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Things like:
# grep __data_loc /sys/kernel/debug/tracing/events/sched/sched_process_exec/format
field:__data_loc char[] filename; offset:8; size:4; signed:1;
#
That, at that offset (8) and with that size(8) have an integer that
contains the real length and offset for the contents of that array.
Now this works:
# perf trace --max-events 1 -e sched:*exec -a
0.000 sed/19441 sched:sched_process_exec(filename: "/usr/bin/sync", pid: 19441 (sync), old_pid: 19441 (sync))
#
As when using the libtraceevent based beautifier:
# perf trace --libtraceevent --max-events 1 -e sched:*exec -a
0.000 sync/19463 sched:sched_process_exec(filename=/usr/bin/sync pid=19463 old_pid=19463)
#
I.e. that 'filename' is implemented as a dynamic char array.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When doing a system wide 'perf trace record' we need, just like in 'perf
trace' live mode, to filter out perf trace's own pid, so set up a
tracepoint filter for the raw_syscalls tracepoints right after adding
them to the argv array that is set up to then call cmd_record().
Reported-by: Andi Kleen <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Will be used directly in 'perf trace' for setting up the command line
argv array to pass to cmd_record, as this was how 'perf trace record'
was implemented, following the model used in 'perf kvm record', 'perf
sched record', etc.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To be used with -S or -s, using just this new option implies -s,
examples:
# perf trace --errno-summary sleep 1
Summary of events:
sleep (10793), 80 events, 93.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
nanosleep 1 0 1000.427 1000.427 1000.427 1000.427 0.00%
mmap 8 0 0.026 0.002 0.003 0.005 9.18%
close 5 0 0.018 0.001 0.004 0.009 48.97%
mprotect 4 0 0.017 0.003 0.004 0.006 16.49%
openat 3 0 0.012 0.003 0.004 0.005 9.41%
munmap 1 0 0.010 0.010 0.010 0.010 0.00%
brk 4 0 0.005 0.001 0.001 0.002 22.77%
read 4 0 0.005 0.001 0.001 0.002 22.33%
access 1 1 0.004 0.004 0.004 0.004 0.00%
ENOENT: 1
fstat 3 0 0.004 0.001 0.001 0.002 17.18%
lseek 3 0 0.003 0.001 0.001 0.001 11.62%
arch_prctl 2 1 0.002 0.001 0.001 0.001 3.32%
EINVAL: 1
execve 1 0 0.000 0.000 0.000 0.000 0.00%
#
Works as well together with --failure and -S, i.e. collect the stats and
show just the syscalls that failed:
# perf trace --failure -S --errno-summary sleep 1
0.032 arch_prctl(option: 0x3001, arg2: 0x7fffdb11b580) = -1 EINVAL (Invalid argument)
0.045 access(filename: "/etc/ld.so.preload", mode: R) = -1 ENOENT (No such file or directory)
Summary of events:
sleep (10806), 80 events, 93.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
nanosleep 1 0 1000.094 1000.094 1000.094 1000.094 0.00%
mmap 8 0 0.026 0.002 0.003 0.005 9.06%
close 5 0 0.018 0.001 0.004 0.010 49.58%
mprotect 4 0 0.017 0.003 0.004 0.006 17.56%
openat 3 0 0.014 0.004 0.005 0.006 12.29%
munmap 1 0 0.010 0.010 0.010 0.010 0.00%
brk 4 0 0.005 0.001 0.001 0.002 22.75%
read 4 0 0.005 0.001 0.001 0.002 17.19%
access 1 1 0.005 0.005 0.005 0.005 0.00%
ENOENT: 1
fstat 3 0 0.004 0.001 0.001 0.002 21.66%
lseek 3 0 0.003 0.001 0.001 0.001 11.71%
arch_prctl 2 1 0.002 0.001 0.001 0.001 2.66%
EINVAL: 1
execve 1 0 0.000 0.000 0.000 0.000 0.00%
#
Suggested-by: Andi Kleen <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Brendan Gregg <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get the changes in:
78f6face5af3 ("sched: add kernel-doc for struct clone_args")
f14c234b4bc5 ("clone3: switch to copy_struct_from_user()")
This file gets rebuilt, but no changes ensues:
CC /tmp/build/perf/trace/beauty/clone.o
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
Cc: Adrian Hunter <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
344c6c804703 ("KVM/Hyper-V: Add new KVM capability KVM_CAP_HYPERV_DIRECT_TLBFLUSH")
dee04eee9182 ("KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface")
These trigger the rebuild of this object:
CC /tmp/build/perf/trace/beauty/ioctl.o
But do not result in any change in tooling, as the additions are not
being used in any table generatator.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <[email protected]>
Cc: Anup Patel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Tianyu Lan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
0cb8410b90e7 ("kvm: svm: Intercept RDPRU")
That trigger a rebuild in too in tooling:
CC /tmp/build/perf/arch/x86/util/kvm-stat.o
But this time around no changes in tooling results, as SVM_EXIT_RDPRU
wasn't added to SVM_EXIT_REASONS, that is used in kvm-stat.c.
And addresses this perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
Cc: Adrian Hunter <[email protected]>
Cc: Jim Mattson <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
bf653b78f960 ("KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit")
That trigger these changes in tooling:
CC /tmp/build/perf/arch/x86/util/kvm-stat.o
INSTALL GTK UI
DESCEND plugins
make[3]: Nothing to be done for '/tmp/build/perf/plugins/libtraceevent-dynamic-list'.
INSTALL trace_plugins
LD /tmp/build/perf/arch/x86/util/perf-in.o
LD /tmp/build/perf/arch/x86/perf-in.o
LD /tmp/build/perf/arch/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
And this is not just because that header is included, kvm-stat.c
uses the VMX_EXIT_REASONS define and it got changed by the above cset.
And addresses this perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Tao Xu <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There is a memory leak problem in the failure paths of
build_cl_output(), so fix it.
Signed-off-by: Yunfeng Ye <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Feilong Lin <[email protected]>
Cc: Hu Shiyuan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|