aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2022-04-21kvm: selftests: introduce and use more page size-related constantsPaolo Bonzini8-13/+8
Clean up code that was hardcoding masks for various fields, now that the masks are included in processor.h. For more cleanup, define PAGE_SIZE and PAGE_MASK just like in Linux. PAGE_SIZE in particular was defined by several tests. Suggested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21kvm: selftests: do not use bitfields larger than 32-bits for PTEsPaolo Bonzini2-115/+92
Red Hat's QE team reported test failure on access_tracking_perf_test: Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages guest physical test memory offset: 0x3fffbffff000 Populating memory : 0.684014577s Writing to populated memory : 0.006230175s Reading from populated memory : 0.004557805s ==== Test Assertion Failure ==== lib/kvm_util.c:1411: false pid=125806 tid=125809 errno=4 - Interrupted system call 1 0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411 2 (inlined by) addr_gpa2hva at kvm_util.c:1405 3 0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98 4 (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152 5 (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232 6 0x00007fefe9ff81ce: ?? ??:0 7 0x00007fefe9c64d82: ?? ??:0 No vm physical memory at 0xffbffff000 I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits PA. It turns out that the address translation for clearing idle page tracking returned a wrong result; addr_gva2gpa()'s last step, which is based on "pte[index[0]].pfn", did the calculation with 40 bits length and the high 12 bits got truncated. In above case the GPA address to be returned should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into 0xffbffff000 and the subsequent gpa2hva lookup failed. The width of operations on bit fields greater than 32-bit is implementation defined, and differs between GCC (which uses the bitfield precision) and clang (which uses 64-bit arithmetic), so this is a potential minefield. Remove the bit fields and using manual masking instead. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036 Reported-by: Nana Liu <nanliu@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21Merge tag 'net-5.18-rc4' of ↵Linus Torvalds2-0/+34
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from xfrm and can. Current release - regressions: - rxrpc: restore removed timer deletion Current release - new code bugs: - gre: fix device lookup for l3mdev use-case - xfrm: fix egress device lookup for l3mdev use-case Previous releases - regressions: - sched: cls_u32: fix netns refcount changes in u32_change() - smc: fix sock leak when release after smc_shutdown() - xfrm: limit skb_page_frag_refill use to a single page - eth: atlantic: invert deep par in pm functions, preventing null derefs - eth: stmmac: use readl_poll_timeout_atomic() in atomic state Previous releases - always broken: - gre: fix skb_under_panic on xmit - openvswitch: fix OOB access in reserve_sfa_size() - dsa: hellcreek: calculate checksums in tagger - eth: ice: fix crash in switchdev mode - eth: igc: - fix infinite loop in release_swfw_sync - fix scheduling while atomic" * tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits) drivers: net: hippi: Fix deadlock in rr_close() selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets nfc: MAINTAINERS: add Bug entry net: stmmac: Use readl_poll_timeout_atomic() in atomic state doc/ip-sysctl: add bc_forwarding netlink: reset network and mac headers in netlink_dump() net: mscc: ocelot: fix broken IP multicast flooding net: dsa: hellcreek: Calculate checksums in tagger net: atlantic: invert deep par in pm functions, preventing null derefs can: isotp: stop timeout monitoring when no first frame was sent bonding: do not discard lowest hash bit for non layer3+4 hashing net: lan966x: Make sure to release ptp interrupt ipv6: make ip6_rt_gc_expire an atomic_t net: Handle l3mdev in ip_tunnel_init_flow l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu net/sched: cls_u32: fix possible leak in u32_init_knode() net/sched: cls_u32: fix netns refcount changes in u32_change() powerpc: Update MAINTAINERS for ibmvnic and VAS net: restore alpha order to Ethernet devices in config ...
2022-04-21KVM: selftests: Silence compiler warning in the kvm_page_table_testThomas Huth1-1/+1
When compiling kvm_page_table_test.c, I get this compiler warning with gcc 11.2: kvm_page_table_test.c: In function 'pre_init_before_test': ../../../../tools/include/linux/kernel.h:44:24: warning: comparison of distinct pointer types lacks a cast 44 | (void) (&_max1 == &_max2); \ | ^~ kvm_page_table_test.c:281:21: note: in expansion of macro 'max' 281 | alignment = max(0x100000, alignment); | ^~~ Fix it by adjusting the type of the absolute value. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20220414103031.565037-1-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-20selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packetsIdo Schimmel1-0/+17
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: d01724dd2a66 ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packetsIdo Schimmel1-0/+17
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-19objtool: Fix function fallthrough detection for vmlinuxJosh Poimboeuf3-3/+2
Objtool's function fallthrough detection only works on C objects. The distinction between C and assembly objects no longer makes sense with objtool running on vmlinux.o. Now that copy_user_64.S has been fixed up, and an objtool sibling call detection bug has been fixed, the asm code is in "compliance" and this hack is no longer needed. Remove it. Fixes: ed53a0d97192 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b434cff98eca3a60dcc64c620d7d5d405a0f441c.1649718562.git.jpoimboe@redhat.com
2022-04-19objtool: Fix sibling call detection in alternativesJosh Poimboeuf1-19/+17
In add_jump_destinations(), sibling call detection requires 'insn->func' to be valid. But alternative instructions get their 'func' set in handle_group_alt(), which runs *after* add_jump_destinations(). So sibling calls in alternatives code don't get properly detected. Fix that by changing the initialization order: call add_special_section_alts() *before* add_jump_destinations(). This also means the special case for a missing 'jump_dest' in add_jump_destinations() can be removed, as it has already been dealt with. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/c02e0a0a2a4286b5f848d17c77fdcb7e0caf709c.1649718562.git.jpoimboe@redhat.com
2022-04-19objtool: Don't set 'jump_dest' for sibling callsJosh Poimboeuf1-13/+22
For most sibling calls, 'jump_dest' is NULL because objtool treats the jump like a call and sets 'call_dest'. But there are a few edge cases where that's not true. Make it consistent to avoid unexpected behavior. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/8737d6b9d1691831aed73375f444f0f42da3e2c9.1649718562.git.jpoimboe@redhat.com
2022-04-19objtool: Use offstr() to print address of missing ENDBRJosh Poimboeuf1-3/+2
Fixes: 89bc853eae4a ("objtool: Find unused ENDBR instructions") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/95d12e800c736a3f7d08d61dabb760b2d5251a8e.1650300597.git.jpoimboe@redhat.com
2022-04-19objtool: Print data address for "!ENDBR" data warningsJosh Poimboeuf1-5/+2
When a "!ENDBR" warning is reported for a data section, objtool just prints the text address of the relocation target twice, without giving any clues about the location of the original data reference: vmlinux.o: warning: objtool: dcbnl_netdevice_event()+0x0: .text+0xb64680: data relocation to !ENDBR: dcbnl_netdevice_event+0x0 Instead, print the address of the data reference, in addition to the address of the relocation target. vmlinux.o: warning: objtool: dcbnl_nb+0x0: .data..read_mostly+0xe260: data relocation to !ENDBR: dcbnl_netdevice_event+0x0 Fixes: 89bc853eae4a ("objtool: Find unused ENDBR instructions") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/762e88d51300e8eaf0f933a5b0feae20ac033bea.1650300597.git.jpoimboe@redhat.com
2022-04-19x86,objtool: Mark cpu_startup_entry() __noreturnPeter Zijlstra1-0/+1
GCC-8 isn't clever enough to figure out that cpu_start_entry() is a noreturn while objtool is. This results in code after the call in start_secondary(). Give GCC a hand so that they all agree on things. vmlinux.o: warning: objtool: start_secondary()+0x10e: unreachable Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220408094718.383658532@infradead.org
2022-04-17Merge tag 'x86-urgent-2022-04-17' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two x86 fixes related to TSX: - Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX to cover all CPUs which allow to disable it. - Disable TSX development mode at boot so that a microcode update which provides TSX development mode does not suddenly make the system vulnerable to TSX Asynchronous Abort" * tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsx: Disable TSX development mode at boot x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
2022-04-15Merge tag 'linux-kselftest-fixes-5.18-rc3' of ↵Linus Torvalds1-8/+17
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "A mqueue perf test memory leak bug fix. mq_perf_tests failed to call CPU_FREE to free memory allocated by CPU_SET" * tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set
2022-04-14perf bench: Fix numa bench to fix usage of affinity for machines with #CPUs > 1KAthira Rajeev1-33/+95
The 'perf bench numa' testcase fails on systems with more than 1K CPUs. Testcase: perf bench numa mem -p 1 -t 3 -P 512 -s 100 -zZ0qcm --thp 1 Snippet of code: <<>> perf: bench/numa.c:302: bind_to_node: Assertion `!(ret)' failed. Aborted (core dumped) <<>> bind_to_node() uses "sched_getaffinity" to save the original cpumask and this call is returning EINVAL ((invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros ie, use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size. Apart from fixing this for "orig_mask", apply same logic to "mask" as well which is used to setaffinity so that mask size is large enough to represent number of possible CPU's in the system. sched_getaffinity is used in one more place in perf numa bench. It is in "bind_to_cpu" function. Apply the same logic there also. Though currently no failure is reported from there, it is ideal to change getaffinity to work with such system configurations having CPU's more than default mask size supported by glibc. Also fix "sched_setaffinity" to use mask size which is large enough to represent number of possible CPU's in the system. Fixed all places where "bind_cpumask" which is part of "struct thread_data" is used such that bind_cpumask works in all configuration. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220412164059.42654-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14perf bench: Fix numa testcase to check if CPU used to bind task is onlineAthira Rajeev3-2/+58
Perf numa bench test fails with error: Testcase: ./perf bench numa mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk Failure snippet: <<>> Running 'numa/mem' benchmark: # Running main, "perf bench numa numa-mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk" perf: bench/numa.c:333: bind_to_cpumask: Assertion `!(ret)' failed. <<>> The Testcases uses CPU's 0 and 8. In function "parse_setup_cpu_list", There is check to see if cpu number is greater than max cpu's possible in the system ie via "if (bind_cpu_0 >= g->p.nr_cpus || bind_cpu_1 >= g->p.nr_cpus) {". But it could happen that system has say 48 CPU's, but only number of online CPU's is 0-7. Other CPU's are offlined. Since "g->p.nr_cpus" is 48, so function will go ahead and set bit for CPU 8 also in cpumask ( td->bind_cpumask). bind_to_cpumask function is called to set affinity using sched_setaffinity and the cpumask. Since the CPU8 is not present, set affinity will fail here with EINVAL. Fix this issue by adding a check to make sure that, CPU's provided in the input argument values are online before proceeding further and skip the test. For this, include new helper function "is_cpu_online" in "tools/perf/util/header.c". Since "BIT(x)" definition will get included from header.h, remove that from bench/numa.c Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220412164059.42654-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14perf record: Fix per-thread optionAlexey Bayduraev1-5/+17
Per-thread mode doesn't have specific CPUs for events, add checks for this case. Minor fix to a pr_debug by Ian Rogers <irogers@google.com> to avoid an out of bound array access. Fixes: 7954f71689f90cb2 ("perf record: Introduce thread affinity and mmap masks") Reported-by: Ian Rogers <irogers@google.com> Signed-off-by: Alexey Bayduraev <alexey.bayduraev@gmail.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220414014642.3308206-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-13perf tools: Fix segfault accessing sample_id xyarrayAdrian Hunter1-2/+1
perf_evsel::sample_id is an xyarray which can cause a segfault when accessed beyond its size. e.g. # perf record -e intel_pt// -C 1 sleep 1 Segmentation fault (core dumped) # That is happening because a dummy event is opened to capture text poke events accross all CPUs, however the mmap logic is allocating according to the number of user_requested_cpus. In general, perf sometimes uses the evsel cpus to open events, and sometimes the evlist user_requested_cpus. However, it is not necessary to determine which case is which because the opened event file descriptors are also in an xyarray, the size of whch can be used to correctly allocate the size of the sample_id xyarray, because there is one ID per file descriptor. Note, in the affected code path, perf_evsel fd array is subsequently used to get the file descriptor for the mmap, so it makes sense for the xyarrays to be the same size there. Fixes: d1a177595b3a824c ("libperf: Adopt perf_evlist__mmap()/munmap() from tools/perf") Fixes: 246eba8e9041c477 ("perf tools: Add support for PERF_RECORD_TEXT_POKE") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org # 5.5+ Link: https://lore.kernel.org/r/20220413114232.26914-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-13perf stat: Fix error check return value of hashmap__new(), must use IS_ERR()Lv Ruyi1-1/+2
hashmap__new() returns ERR_PTR(-ENOMEM) when it fails, so we should use IS_ERR() to check it in error handling path. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220413093302.2538128-1-lv.ruyi@zte.com.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-13tools/power/x86/intel-speed-select: fix build failure when using -Wl,--as-neededHerton R. Krzesinski1-1/+1
Build of intel-speed-select will fail if you run: $ LDFLAGS="-Wl,--as-needed" /usr/bin/make V=1 ... gcc -O2 -Wall -g -D_GNU_SOURCE -Iinclude -I/usr/include/libnl3 -Wl,--as-needed -lnl-genl-3 -lnl-3 intel-speed-select-in.o -o intel-speed-select /usr/bin/ld: intel-speed-select-in.o: in function `handle_event': (...)/linux/tools/power/x86/intel-speed-select/hfi-events.c:189: undefined reference to `nlmsg_hdr' ... In this case the problem is that order when linking matters when using the flag -Wl,--as-needed, symbols not used at that point are discarded. So since intel-speed-select-in.o comes after, at that point the libraries/symbols are already discarded and then missing/undefined references are reported. To fix this, make sure we specify LDFLAGS after the object file. Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Herton R. Krzesinski <herton@redhat.com> Link: https://lore.kernel.org/r/20220404210525.725611-1-herton@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-13perf tools: Fix misleading add event PMU debug messageAdrian Hunter1-2/+3
Fix incorrect debug message: Attempting to add event pmu 'intel_pt' with '' that may result in non-fatal errors which always appears with perf record -vv and intel_pt e.g. perf record -vv -e intel_pt//u uname The message is incorrect because there will never be non-fatal errors. Suppress the message if the PMU is 'selectable' i.e. meant to be selected directly as an event. Fixes: 4ac22b484d4c79e8 ("perf parse-events: Make add PMU verbose output clearer") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20220411061758.2458417-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds8-13/+181
Pull kvm fixes from Paolo Bonzini: "x86: - Miscellaneous bugfixes - A small cleanup for the new workqueue code - Documentation syntax fix RISC-V: - Remove hgatp zeroing in kvm_arch_vcpu_put() - Fix alignment of the guest_hang() in KVM selftest - Fix PTE A and D bits in KVM selftest - Missing #include in vcpu_fp.c ARM: - Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2 - Fix the MMU write-lock not being taken on THP split - Fix mixed-width VM handling - Fix potential UAF when debugfs registration fails - Various selftest updates for all of the above" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (24 commits) KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPU KVM: SVM: Do not activate AVIC for SEV-enabled guest Documentation: KVM: Add SPDX-License-Identifier tag selftests: kvm: add tsc_scaling_sync to .gitignore RISC-V: KVM: include missing hwcap.h into vcpu_fp KVM: selftests: riscv: Fix alignment of the guest_hang() function KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put() selftests: KVM: Free the GIC FD when cleaning up in arch_timer selftests: KVM: Don't leak GIC FD across dirty log test iterations KVM: Don't create VM debugfs files outside of the VM directory KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3) KVM: avoid NULL pointer dereference in kvm_dirty_ring_push KVM: arm64: selftests: Introduce vcpu_width_config KVM: arm64: mixed-width check should be skipped for uninitialized vCPUs KVM: arm64: vgic: Remove unnecessary type castings KVM: arm64: Don't split hugepages outside of MMU write lock KVM: arm64: Drop unneeded minor version check from PSCI v1.x handler KVM: arm64: Actually prevent SMC64 SYSTEM_RESET2 from AArch32 KVM: arm64: Generally disallow SMC64 for AArch32 guests ...
2022-04-12testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu setAthira Rajeev1-8/+17
The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate CPU set. This cpu set is used further in pthread_attr_setaffinity_np and by pthread_create in the code. But in current code, allocated cpu set is not freed. Fix this issue by adding CPU_FREE in the "shutdown" function which is called in most of the error/exit path for the cleanup. There are few error paths which exit without using shutdown. Add a common goto error path with CPU_FREE for these cases. Fixes: 7820b0715b6f ("tools/selftests: add mq_perf_tests") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-11selftests: kvm: add tsc_scaling_sync to .gitignoreLike Xu1-0/+1
The tsc_scaling_sync's binary should be present in the .gitignore file for the git to ignore it. Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20220406063715.55625-3-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-11x86/tsx: Disable TSX development mode at bootPawan Gupta1-2/+2
A microcode update on some Intel processors causes all TSX transactions to always abort by default[*]. Microcode also added functionality to re-enable TSX for development purposes. With this microcode loaded, if tsx=on was passed on the cmdline, and TSX development mode was already enabled before the kernel boot, it may make the system vulnerable to TSX Asynchronous Abort (TAA). To be on safer side, unconditionally disable TSX development mode during boot. If a viable use case appears, this can be revisited later. [*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557 [ bp: Drop unstable web link, massage heavily. ] Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
2022-04-10Merge tag 'x86_urgent_for_v5.18_rc2' of ↵Linus Torvalds1-5/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix the MSI message data struct definition - Use local labels in the exception table macros to avoid symbol conflicts with clang LTO builds - A couple of fixes to objtool checking of the relatively newly added SLS and IBT code - Rename a local var in the WARN* macro machinery to prevent shadowing * tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msi: Fix msi message data shadow struct x86/extable: Prefer local labels in .set directives x86,bpf: Avoid IBT objtool warning objtool: Fix SLS validation for kcov tail-call replacement objtool: Fix IBT tail-call detection x86/bug: Prevent shadowing in __WARN_FLAGS x86/mm/tlb: Revert retpoline avoidance approach
2022-04-09Merge tag 'perf-tools-fixes-for-v5.18-2022-04-09' of ↵Linus Torvalds26-71/+234
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix the clang command line option probing and remove some options to filter out, fixing the build with the latest clang versions - Fix 'perf bench' futex and epoll benchmarks to deal with machines with more than 1K CPUs - Fix 'perf test tsc' error message when not supported - Remap perf ring buffer if there is no space for event, fixing perf usage in 32-bit ChromeOS - Drop objdump stderr to avoid getting stuck waiting for stdout output in 'perf annotate' - Fix up garbled output by now showing unwind error messages when augmenting frame in best effort mode - Fix perf's libperf_print callback, use the va_args eprintf() variant - Sync vhost and arm64 cputype headers with the kernel sources - Fix 'perf report --mem-mode' with ARM SPE - Add missing external commands ('iiostat', etc) to 'perf --list-cmds' * tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output perf tools: Add external commands to list-cmds perf docs: Add perf-iostat link to manpages perf session: Remap buf if there is no space for event perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K perf tools: Fix perf's libperf_print callback perf: arm-spe: Fix perf report --mem-mode perf unwind: Don't show unwind error messages when augmenting frame pointer stack tools headers arm64: Sync arm64's cputype.h with the kernel sources perf test tsc: Fix error message when not supported perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13 perf python: Fix probing for some clang command line options tools build: Filter out options and warnings not supported by clang tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts tools include UAPI: Sync linux/vhost.h with the kernel sources
2022-04-09Merge tag 'cxl+nvdimm-for-5.18-rc2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull cxl and nvdimm fixes from Dan Williams: - Fix a compile error in the nvdimm unit tests - Fix a shadowed variable warning in the CXL PCI driver * tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: cxl/pci: Drop shadowed variable tools/testing/nvdimm: Fix security_init() symbol collision
2022-04-09perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout ↵Ian Rogers1-0/+1
output If objdump writes to stderr it can block waiting for it to be read. As perf doesn't read stderr then progress stops with perf waiting for stdout output. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Denis Nikitin <denik@chromium.org> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Lexi Shao <shaolexi@huawei.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: William Cohen <wcohen@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20220407230503.1265036-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf tools: Add external commands to list-cmdsMichael Petlan1-0/+4
The `perf --list-cmds` output prints only internal commands, although there is no reason for that from users' perspective. Adding the external commands to commands array with NULL function pointer allows printing all perf commands while not changing the logic of command handler selection. Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220404221541.30312-2-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf docs: Add perf-iostat link to manpagesMichael Petlan1-1/+1
Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220404221541.30312-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf session: Remap buf if there is no space for eventDenis Nikitin1-3/+12
If a perf event doesn't fit into remaining buffer space return NULL to remap buf and fetch the event again. Keep the logic to error out on inadequate input from fuzzing. This fixes perf failing on ChromeOS (with 32b userspace): $ perf report -v -i perf.data ... prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data? Error: failed to process sample Fixes: 57fc032ad643ffd0 ("perf session: Avoid infinite loop when seeing invalid header.size") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Denis Nikitin <denik@chromium.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf bench: Fix epoll bench to correct usage of affinity for machines with ↵Athira Rajeev2-12/+38
#CPUs > 1K The 'perf bench epoll' testcase fails on systems with more than 1K CPUs. Testcase: perf bench epoll all Result snippet: <<>> Run summary [PID 106497]: 1399 threads monitoring on 64 file-descriptors for 8 secs. perf: pthread_create: No such file or directory <<>> In epoll benchmarks (ctl, wait) pthread_create is invoked in do_threads from respective bench_epoll_* function. Though the logs shows direct failure from pthread_create, the actual failure is from "sched_setaffinity" returning EINVAL (invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros. Patch addresses this by fixing all the epoll benchmarks to use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the mask. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220406175113.87881-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf bench: Fix futex bench to correct usage of affinity for machines with ↵Athira Rajeev5-28/+83
#CPUs > 1K The 'perf bench futex' testcase fails on systems with more than 1K CPUs. Testcase: perf bench futex all Failure snippet: <<>>Running futex/hash benchmark... perf: pthread_create: No such file or directory <<>> All the futex benchmarks (ie hash, lock-api, requeue, wake, wake-parallel), pthread_create is invoked in respective bench_futex_* function. Though the logs shows direct failure from pthread_create, strace logs showed that actual failure is from "sched_setaffinity" returning EINVAL (invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros. Patch addresses this by fixing all the futex benchmarks to use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the mask. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220406175113.87881-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf tools: Fix perf's libperf_print callbackAdrian Hunter1-1/+1
eprintf() does not expect va_list as the type of the 4th parameter. Use veprintf() because it does. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 428dab813a56ce94 ("libperf: Merge libperf_set_print() into libperf_init()") Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220408132625.2451452-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf: arm-spe: Fix perf report --mem-modeJames Clark1-0/+6
Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") "perf mem report" and "perf report --mem-mode" don't allow opening the file unless one of the events has PERF_SAMPLE_DATA_SRC set. SPE doesn't have this set even though synthetic memory data is generated after it is decoded. Fix this issue by setting DATA_SRC on SPE events. This has no effect on the data collected because the SPE driver doesn't do anything with that flag and doesn't generate samples. Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") Signed-off-by: James Clark <james.clark@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220408144056.1955535-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf unwind: Don't show unwind error messages when augmenting frame pointer ↵James Clark8-14/+32
stack Commit Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'") intended to add a 'best effort' DWARF unwind that improved the frame pointer stack in most scenarios. It's expected that the unwind will fail sometimes, but this shouldn't be reported as an error. It only works when the return address can be determined from the contents of the link register alone. Fix the error shown when the unwinder requires extra registers by adding a new flag that suppresses error messages. This flag is not set in the normal --call-graph=dwarf unwind mode so that behavior is not changed. Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: James Clark <james.clark@arm.com> Tested-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: German Gomez <german.gomez@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220406145651.1392529-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09tools headers arm64: Sync arm64's cputype.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+2
To get the changes in: 83bea32ac7ed37bb ("arm64: Add part number for Arm Cortex-A78AE") That addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h' diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h Cc: Ali Saidi <alisaidi@amazon.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Chanho Park <chanho61.park@samsung.com> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf test tsc: Fix error message when not supportedChengdong Li1-9/+27
By default `perf test tsc` does not return the error message when the child process detected kernel does not support it. Instead, the child process prints an error message to stderr, unfortunately stderr is redirected to /dev/null when verbose <= 0. This patch does: - return TEST_SKIP to the parent process instead of TEST_OK when perf_read_tsc_conversion() is not supported. - Add a new subtest of testing if TSC is supported on current architecture by moving exist code to a separate function. It avoids two places in test__perf_time_to_tsc() that return TEST_SKIP by doing this. - Extend the test suite definition to contain above two subtests. Current test_suite and test_case structs do not support printing skip reason when the number of subtest less than 1. To print skip reason, it is necessary to extend current test suite definition. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chengdong Li <chengdongli@tencent.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: likexu@tencent.com Link: https://lore.kernel.org/r/20220408084748.43707-1-chengdongli@tencent.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf build: Don't use -ffat-lto-objects in the python feature test when ↵Arnaldo Carvalho de Melo2-0/+5
building with clang-13 Using -ffat-lto-objects in the python feature test when building with clang-13 results in: clang-13: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument] error: command '/usr/sbin/clang' failed with exit code 1 cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory make[2]: *** [Makefile.perf:639: /tmp/build/perf/python/perf.so] Error 1 Noticed when building on a docker.io/library/archlinux:base container. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf python: Fix probing for some clang command line optionsArnaldo Carvalho de Melo1-2/+4
The clang compiler complains about some options even without a source file being available, while others require one, so use the simple tools/build/feature/test-hello.c file. Then check for the "is not supported" string in its output, in addition to the "unknown argument" already being looked for. This was noticed when building with clang-13 where -ffat-lto-objects isn't supported and since we were looking just for "unknown argument" and not providing a source code to clang, was mistakenly assumed as being available and not being filtered to set of command line options provided to clang, leading to a build failure. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Link: http://lore.kernel.org/lkml/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09tools build: Filter out options and warnings not supported by clangArnaldo Carvalho de Melo2-0/+10
These make the feature check fail when using clang, so remove them just like is done in tools/perf/Makefile.config to build perf itself. Adding -Wno-compound-token-split-by-macro to tools/perf/Makefile.config when building with clang is also necessary to avoid these warnings turned into errors (-Werror): CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o In file included from util/scripting-engines/trace-event-perl.c:35: In file included from /usr/lib64/perl5/CORE/perl.h:4085: In file included from /usr/lib64/perl5/CORE/hv.h:659: In file included from /usr/lib64/perl5/CORE/hv_func.h:34: In file included from /usr/lib64/perl5/CORE/sbox32_hash.h:4: /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro] ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:80:38: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \ ^~~~~~~~~~ /usr/lib64/perl5/CORE/perl.h:737:29: note: expanded from macro 'STMT_START' # define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: '{' token is here ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:80:49: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro] ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:87:41: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' v ^= (v>>23); \ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: ')' token is here ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:88:3: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' } STMT_END ^~~~~~~~ /usr/lib64/perl5/CORE/perl.h:738:21: note: expanded from macro 'STMT_END' # define STMT_END ) ^ Please refer to the discussion on the Link: tag below, where Nathan clarifies the situation: <quote> acme> And then get to the problems at the end of this message, which seem acme> similar to the problem described here: acme> acme> From Nathan Chancellor <> acme> Subject [PATCH] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO acme> acme> https://lkml.org/lkml/2020/9/1/135 acme> acme> So perhaps in this case its better to disable that acme> -Werror,-Wcompound-token-split-by-macro when building with clang? Yes, I think that is probably the best solution. As far as I can tell, at least in this file and context, the warning appears harmless, as the "create a GNU C statement expression from two different macros" is very much intentional, based on the presence of PERL_USE_GCC_BRACE_GROUPS. The warning is fixed in upstream Perl by just avoiding creating GNU C statement expressions using STMT_START and STMT_END: https://github.com/Perl/perl5/issues/18780 https://github.com/Perl/perl5/pull/18984 If I am reading the source code correctly, an alternative to disabling the warning would be specifying -DPERL_GCC_BRACE_GROUPS_FORBIDDEN but it seems like that might end up impacting more than just this site, according to the issue discussion above. </quote> Based-on-a-patch-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: http://lore.kernel.org/lkml/YkxWcYzph5pC1EK8@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09tools build: Use $(shell ) instead of `` to get embedded libperl's ccoptsArnaldo Carvalho de Melo1-1/+1
Just like its done for ldopts and for both in tools/perf/Makefile.config. Using `` to initialize PERL_EMBED_CCOPTS somehow precludes using: $(filter-out SOMETHING_TO_FILTER,$(PERL_EMBED_CCOPTS)) And we need to do it to allow for building with versions of clang where some gcc options selected by distros are not available. Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: http://lore.kernel.org/lkml/YktYX2OnLtyobRYD@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09tools include UAPI: Sync linux/vhost.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+7
To get the changes in: b04d910af330b55e ("vdpa: support exposing the count of vqs to userspace") a61280ddddaa45f9 ("vdpa: support exposing the config size to userspace") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2021-07-15 16:17:01.840818309 -0300 +++ include/uapi/linux/vhost.h 2022-04-02 18:55:05.702522387 -0300 @@ -150,4 +150,11 @@ /* Get the valid iova range */ #define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ struct vhost_vdpa_iova_range) + +/* Get the config size */ +#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32) + +/* Get the count of all virtqueues */ +#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32) + #endif $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2022-04-04 14:52:25.036375145 -0300 +++ after 2022-04-04 14:52:31.906549976 -0300 @@ -38,4 +38,6 @@ [0x73] = "VDPA_GET_CONFIG", [0x76] = "VDPA_GET_VRING_NUM", [0x78] = "VDPA_GET_IOVA_RANGE", + [0x79] = "VDPA_GET_CONFIG_SIZE", + [0x80] = "VDPA_GET_VQS_COUNT", }; $ Cc: Longpeng <longpeng2@huawei.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/lkml/YksxoFcOARk%2Fldev@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09KVM: selftests: riscv: Fix alignment of the guest_hang() functionAnup Patel1-1/+1
The guest_hang() function is used as the default exception handler for various KVM selftests applications by setting it's address in the vstvec CSR. The vstvec CSR requires exception handler base address to be at least 4-byte aligned so this patch fixes alignment of the guest_hang() function. Fixes: 3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V 64-bit") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-04-09KVM: selftests: riscv: Set PTE A and D bits in VS-stage page tableAnup Patel1-1/+3
Supporting hardware updates of PTE A and D bits is optional for any RISC-V implementation so current software strategy is to always set these bits in both G-stage (hypervisor) and VS-stage (guest kernel). If PTE A and D bits are not set by software (hypervisor or guest) then RISC-V implementations not supporting hardware updates of these bits will cause traps even for perfectly valid PTEs. Based on above explanation, the VS-stage page table created by various KVM selftest applications is not correct because PTE A and D bits are not set. This patch fixes VS-stage page table programming of PTE A and D bits for KVM selftests. Fixes: 3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V 64-bit") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-04-08Merge tag 'linux-kselftest-fixes-5.18-rc2' of ↵Linus Torvalds6-31/+54
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Build and run-times fixes to tests: - header dependencies - missing tear-downs to release allocated resources in assert paths - missing error messages when build fails - coccicheck and unused variable warnings" * tag 'linux-kselftest-fixes-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/harness: Pass variant to teardown selftests/harness: Run TEARDOWN for ASSERT failures selftests: fix an unused variable warning in pidfd selftest selftests: fix header dependency for pid_namespace selftests selftests: x86: add 32bit build warnings for SUSE selftests/proc: fix array_size.cocci warning selftests/vDSO: fix array_size.cocci warning
2022-04-08tools/testing/nvdimm: Fix security_init() symbol collisionDan Williams1-2/+2
Starting with the new perf-event support in the nvdimm core, the nfit_test mock module stops compiling. Rename its security_init() to nfit_security_init(). tools/testing/nvdimm/test/nfit.c:1845:13: error: conflicting types for ‘security_init’; have ‘void(struct nfit_test *)’ 1845 | static void security_init(struct nfit_test *t) | ^~~~~~~~~~~~~ In file included from ./include/linux/perf_event.h:61, from ./include/linux/nd.h:11, from ./drivers/nvdimm/nd-core.h:11, from tools/testing/nvdimm/test/nfit.c:19: Fixes: 9a61d0838cd0 ("drivers/nvdimm: Add nvdimm pmu structure") Cc: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/164904238610.1330275.1889212115373993727.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-07Merge tag 'net-5.18-rc2' of ↵Linus Torvalds6-28/+134
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - new code bugs: - mctp: correct mctp_i2c_header_create result - eth: fungible: fix reference to __udivdi3 on 32b builds - eth: micrel: remove latencies support lan8814 Previous releases - regressions: - bpf: resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT - vrf: fix packet sniffing for traffic originating from ip tunnels - rxrpc: fix a race in rxrpc_exit_net() - dsa: revert "net: dsa: stop updating master MTU from master.c" - eth: ice: fix MAC address setting Previous releases - always broken: - tls: fix slab-out-of-bounds bug in decrypt_internal - bpf: support dual-stack sockets in bpf_tcp_check_syncookie - xdp: fix coalescing for page_pool fragment recycling - ovs: fix leak of nested actions - eth: sfc: - add missing xdp queue reinitialization - fix using uninitialized xdp tx_queue - eth: ice: - clear default forwarding VSI during VSI release - fix broken IFF_ALLMULTI handling - synchronize_rcu() when terminating rings - eth: qede: confirm skb is allocated before using - eth: aqc111: fix out-of-bounds accesses in RX fixup - eth: slip: fix NPD bug in sl_tx_timeout()" * tag 'net-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) drivers: net: slip: fix NPD bug in sl_tx_timeout() bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets bpf: Support dual-stack sockets in bpf_tcp_check_syncookie myri10ge: fix an incorrect free for skb in myri10ge_sw_tso net: usb: aqc111: Fix out-of-bounds accesses in RX fixup qede: confirm skb is allocated before using net: ipv6mr: fix unused variable warning with CONFIG_IPV6_PIMSM_V2=n net: phy: mscc-miim: reject clause 45 register accesses net: axiemac: use a phandle to reference pcs_phy dt-bindings: net: add pcs-handle attribute net: axienet: factor out phy_node in struct axienet_local net: axienet: setup mdio unconditionally net: sfc: fix using uninitialized xdp tx_queue rxrpc: fix a race in rxrpc_exit_net() net: openvswitch: fix leak of nested actions net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address() net: openvswitch: don't send internal clone attribute to the userspace. net: micrel: Fix KS8851 Kconfig ice: clear cmd_type_offset_bsz for TX rings ice: xsk: fix VSI state check in ice_xsk_wakeup() ...
2022-04-07selftests: KVM: Free the GIC FD when cleaning up in arch_timerOliver Upton1-4/+11
In order to correctly destroy a VM, all references to the VM must be freed. The arch_timer selftest creates a VGIC for the guest, which itself holds a reference to the VM. Close the GIC FD when cleaning up a VM. Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220406235615.1447180-4-oupton@google.com
Powered by cgit, Gruvboxed by Blaster4385.