| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
cppcheck detected following warning:
[tools/perf/util/session.c:1628] -> [tools/perf/util/session.c:1632]:
(warning) Possible null pointer dereference: session - otherwise it
is redundant to check it against null.
In order to avoide null pointer, check the pointer before use.
Signed-off-by: Masanari Iida <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
In map_switch_event(), we don't care the previous process currently,
this patch remove the infomation we get but not used.
Signed-off-by: Dongsheng Yang <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
As we do not use .success in sched_wakeup event any more, then
we can not guarantee that the task when wakeup event happen is
out of run queue. So the message of nr_state_machine_bugs is
not correct.
Signed-off-by: Dongsheng Yang <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
The current scripting only keeps track of the git SHA-1 of the current
HEAD. This can cause confusion in cases where testing ran in a git
tree where changes had not yet been checked in. This commit therefore
also records the output of "git diff HEAD" to provide the information
needed to reconstruct the source tree that was tested.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
This commit ensures that RCU-sched primitives are tested in
TREE_PREEMPT_RCU kernels, a combination that was previously omitted.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
The kvm-test-1-run.sh currently counts "sleep 1" commands to detect
hangs. This can fail spectacularly on busy systems, where "sleep 1"
might take far longer than one second to complete. This commit
therefore changes hang detection to use elapsed time measurements.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
The reaction of kvm-recheck.sh is obscure at best, and easy to miss
completely. This commit therefore prints "BUG: Build failed" in the
summary at the end of a run. This commit also adds the line of dashes
in cases where performance info is not available, and also avoids
printing nonsense diagnostics in cases where some of the normal test
output is not available. In addition, this commit saves off the .config
file even when the build fails.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This commit adds a CONFIG_RCU_TRACE=y version of TREE02 for debugging
purposes.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
Currently, the scripts hard-code arch/x86/boot/bzImage, which does not
work well for other architectures. This commit therefore provides a
identify_boot_image function that selects the correct bzImage location
relative to the top of the Linux source tree. This commit also adds a
--bootimage argument that allows selecting some other file, for example,
"vmlinux".
This change requires that the definition of the QEMU variable be
computed earlier in order to identify where to look for the boot image
when it comes time to copy it to the results directory.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
This commit applies quotes to permit multi-word --qemu-args and
--bootargs arguments.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
The current script does record qemu diagnostics, but the user has to
know where to look for them. This commit therefore puts them into the
Warnings file so that kvm-recheck.sh will display them. This change is
especially useful if you are in the habit of killing the qemu process
when you realize that you messed something up, but then later on wonder
why the process terminated early.
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
In a normal torture-test run, the script inherits its environment
variables, but this does not work when producing a script that is
to run later. Therefore, definitions and exports are prepended to
a dryrun script but not to a script that is run immediately. This
commit reconciles this by placing definitions and exports at the
beginning of the script in both cases.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
Conflicts:
tools/testing/selftests/rcutorture/bin/kvm.sh
|
|
The scripts produced by kvm.sh's "--dryrun script" argument were intended
for debugging rather than to run, but it is easier to debug if the script
output matches exactly what is run. This commit therefore makes this
script runnable.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
The torture tests need to set specific values for their respective
Kconfig options (e.g., CONFIG_LOCK_TORTURE_TEST), and must therefore
filter any conflicting definitions from the Kconfig fragment
file. Unfortunately, the code in kvm-build.sh was looking only for
CONFIG_RCU_TORTURE_TEST. This commit therefore handles the general case
of CONFIG_[A-Z]*_TORTURE_TEST.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
This commit makes the torture scripts a bit more RCU-independent.
It also removes a redundant export of this same shell variable.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
This commit makes the torture scripts a bit more RCU-independent.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
This commit makes the torture scripts a bit more RCU-independent.
It also drops an redundant "export" statement.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
This commit makes the torture scripts a bit more RCU-independent.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
This commit makes the torture scripts a bit more RCU-independent by
changing RCU_BUILDONLY to TORTURE_BUILDONLY. It also removes an
unnecessary export command.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
This commit makes the torture scripts a bit more RCU-independent.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
This commit makes the torture scripts a bit more RCU-independent by
changing RCU_KMAKE_ARG to TORTURE_KMAKE_ARG. It also removes the
unnecessary export command.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
Some environments require some variation on "make defconfig" to initialize
the .config file. This commit therefore adds a --defconfig argument to
allow this to be specified. The default value is of course "defconfig".
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
This patch adds two example applications showing usage of Asynchronous I/O API
of FunctionFS. First one (aio_simple) is simple example of bidirectional data
transfer. Second one (aio_multibuff) shows multi-buffer data transfer, which
may to be used in high performance applications.
Both examples contains userspace applications for device and for host.
It needs libaio library on the device, and libusb library on host.
Signed-off-by: Robert Baldyga <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
|
|
This commit makes the torture scripts a bit more RCU-independent.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
It can be a bit jarring to see a locking test complain about RCU, so
this commit renames parse-rcutorture.sh to parse-torture.sh and makes
the messages it emits more generic.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
This commit makes the output of "--dryrun sched" more user-friendly,
clearly indicating the batch starts.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
The --builddir and --relbuilddir options were initially intended to handle
parallel tests. However, since commit 43e38ab3d518 (Enable concurrent
rcutorture runs), the script manages multiple build directories as
needed for parallel testing. This commit therefore removes these two
obsolete options.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
|
|
trace_sched_wakeup(.success) is a dead argument and has been for ages,
the only reason its still there is because of brain dead software, which
apparently includes perf tools
There's a few more instances in pearly snake shit, but that's not
supported as far as I care anyhow, so let that bitrot.
Signed-off-by: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core
Pull perf/core improvements and fixes from Jiri Olsa:
* Propagate exit status of a command line workload for
record command (Namhyung Kim)
* Use tid for finding thread (Namhyung Kim)
* Clarify the output of perf sched map plus small sched
command fixies (Dongsheng Yang)
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
I believe that passing pid (instead of tid) as the 3rd arg of the
machine__find*_thread() was to find a main thread so that it can
search proper map group for symbols. However with the map sharing
patch applied, it now can do it in any thread.
It fixes a bug when each thread has different name, it only reports a
main thread for samples in other threads.
Cc: Adrian Hunter <[email protected]>
Acked-by: David Ahern <[email protected]>
Acked-by: Stephane Eranian <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
The on_exit() function was only used in perf record but it's gone in
previous patch.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Stephane Eranian <[email protected]>
Cc: Bernhard Rosenkraenzer <[email protected]>
Cc: Irina Tirdea <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Currently perf record doesn't propagate the exit status of a workload
given by the command line. But sometimes it'd useful if it's
propagated so that a monitoring script can handle errors
appropriately.
To do that, it moves most of logic out of the exit handlers and run
them directly in the __cmd_record(). The only thing needs to be done
in the handler is propagating terminating signal so that the shell can
terminate its loop properly when Ctrl-C was pressed. Also it cleaned
up the resource management code in record__exit().
With this change, perf record returns the child exit status in case of
normal termination and send signal to itself when terminated by signal.
Example run of Stephane's case:
$ perf record true && echo yes || echo no
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ]
yes
$ perf record false && echo yes || echo no
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ]
no
Jiri's case (error in parent):
$ perf record -m 10G true && echo yes || echo no
rounding mmap pages size to 17179869184 bytes (4194304 pages)
failed to mmap with 12 (Cannot allocate memory)
no
$ ulimit -n 6
$ perf record sleep 1 && echo yes || echo no
failed to create 'go' pipe: Too many open files
Couldn't run the workload!
no
And Peter's case (interrupted by signal):
$ while :; do perf record sleep 1; done
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ]
Reported-by: Stephane Eranian <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Stephane Eranian <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
In output of perf sched map, any shortname of thread will be explained
at the first time when it appear.
Example:
*A0 228836.978985 secs A0 => perf:23032
*. A0 228836.979016 secs B0 => swapper:0
. *C0 228836.979099 secs C0 => migration/3:22
*A0 . C0 228836.979115 secs
A0 . *. 228836.979115 secs
But B0, which is explained as swapper:0 did not appear in the
left part of output. Instead, we use '.' as the shortname of
swapper:0. So the comment of "B0 => swapper:0" is not easy to
understand.
This patch clarify the output of perf sched map with not allocating
one letter-number shortname for swapper:0 and print ". => swapper:0"
as the explanation for swapper:0.
Example:
*A0 228836.978985 secs A0 => perf:23032
* . A0 228836.979016 secs . => swapper:0
. *B0 228836.979099 secs B0 => migration/3:22
*A0 . B0 228836.979115 secs
A0 . * . 228836.979115 secs
A0 *C0 . 228836.979225 secs C0 => ksoftirqd/2:18
A0 *D0 . 228836.979236 secs D0 => rcu_sched:7
Signed-off-by: Dongsheng <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ small style fixes to make checkpatch happy ]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Currently, TASK_STATE_TO_CHAR_STR in kernel space is already expanded to RSDTtZXxKWP,
but it is still RSDTtZX in perf sched tool.
This patch update TASK_STATE_TO_CHAR_STR to the new value in kernel space.
Signed-off-by: Dongsheng <[email protected]>
Link: http://lkml.kernel.org/r/6d2f55dc1e02c1e29a5d70bfeb9d6e8863caf2aa.1399273302.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Jiri Olsa <[email protected]>
|
|
We should record and process sched:sched_wakeup_new event in
perf sched tool, but currently, there is the process function
for it, without recording it in record subcommand.
This patch add -e sched:sched_wakeup_new to perf sched record.
Signed-off-by: Dongsheng <[email protected]>
Link: http://lkml.kernel.org/r/710c6edd2162b2cea1711443f54de47c0210d9fd.1399273302.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Jiri Olsa <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux into perf/urgent
Pull liblockdep fixes from Sasha Levin, to fix two build related bugs.
Signed-off-by: Ingo Molnar <[email protected]>
|
|
We forgot to remove the shared library with the version number when
'make clean' ran, fix the clean pattern.
Signed-off-by: Sasha Levin <[email protected]>
|
|
add targets to build liblockdep with
make -C tools liblockdep
like the way other stuff under tools/ can be built
Signed-off-by: S. Lockwood-Childs <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
|
|
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
It is reported that there are buggy BIOSes in the world: AMI uses an XSDT
compiler for early BIOSes, this compiler will generate XSDT with a NULL
entry. The affected BIOS versions are "AMI BIOS F2-F4".
Original solution on Linux is to use an alternative heathy root table
instead of the ill one. This commit is:
Commit: 671cc68dc61f029d44b43a681356078e02d8dab8
Subject: ACPICA: Back port and refine validation of the XSDT root table.
This is an example of such XSDT dumped from B85-HD3 (AMI F3 BIOS):
[000h 0000 4] Signature : "XSDT" [Extended System Description Table]
[004h 0004 4] Table Length : 00000074
[008h 0008 1] Revision : 01
[009h 0009 1] Checksum : 18
[00Ah 0010 6] Oem ID : "ALASKA"
[010h 0016 8] Oem Table ID : "A M I"
[018h 0024 4] Oem Revision : 01072009
[01Ch 0028 4] Asl Compiler ID : "AMI "
[020h 0032 4] Asl Compiler Revision : 00010013
[024h 0036 8] ACPI Table Address 0 : 00000000BA5F8180
[02Ch 0044 8] ACPI Table Address 1 : 00000000BA5F8290
[034h 0052 8] ACPI Table Address 2 : 00000000BA5F8308
[03Ch 0060 8] ACPI Table Address 3 : 00000000BA5F8848
[044h 0068 8] ACPI Table Address 4 : 00000000BA5F9320
[04Ch 0076 8] ACPI Table Address 5 : 00000000BA5F9360
[054h 0084 8] ACPI Table Address 6 : 00000000BA5F9398
[05Ch 0092 8] ACPI Table Address 7 : 00000000BA5F9708
[064h d100 8] ACPI Table Address 8 : 00000000BA5FC9A8
[06Ch 0108 8] ACPI Table Address 9 : 0000000000000000
But according to the bug report, the XSDT in fact is not broken. In the
above XSDT, ACPI Table Address 1-8 contains the same value as RSDT. The
differences can only be seen on the following 2 entries:
1. The first entry points to a FADT whose Revision is 5 while the first
entry in RSDT points to a FADT whose Revision is 2.
The FADT dumped from the address indicated by the first entry of XSDT:
FACP @ 0x00000000BA5F8180
0000: 46 41 43 50 0C 01 00 00<05>4B 41 4C 41 53 4B 41 FACP.....KALASKA
...
The FADT dumped from the address indicated by the first entry of RSDT:
FACP @ 0x00000000BA5ED0F0
0000: 46 41 43 50 84 00 00 00<02>A7 41 4C 41 53 4B 41 FACP......ALASKA
...
2. The last entry is a NULL terminator.
According to the test result, the Revision 5 FADT is accessible. Thus the
original solution turns out to be a work around that is preventing the
higher revision tables to be used for such platforms (they are all x86-64
platforms, and should use XSDT and higher revision FADT).
This patch offers a new solution, where a sanity check is performed before
installing a table address from XSDT. If the entry is NULL, it is simply
discarded.
Note that, this patch doesn't remove the original solution, so for Linux
kernel, this commit is actually a no-op, but it allows acpidump to be
working on such platforms. By doing so, we allow another easy revertable
commit to enable this feature so that when that commit is reverted, the
useful sanity check will not be affected. Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=73911
References: https://bugs.archlinux.org/task/39811
Signed-off-by: Lv Zheng <[email protected]>
Reported-and-tested-by: Bruce Chiarelli <[email protected]>
Reported-and-tested-by: Spyros Stathopoulos <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
This patch adds "-x" and "-x -x" options to disable XSDT for acpidump.
The single "-x" can be used to stop using XSDT, RSDT will be forced to find
static tables, note that XSDT will still be dumped. The double "-x" can
stop dumping XSDT, which is useful when the XSDT address reported by RSDP
is pointing to an invalid address.
It is reported there are platforms having broken XSDT shipped, acpidump
will stop working while accessing such XSDT. This patch adds new option so
that users can force acpidump to dump tables listed in the RSDT. Lv Zheng.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=73911
Buglink: https://bugs.archlinux.org/task/39811
Signed-off-by: Lv Zheng <[email protected]>
Reported-and-tested-by: Bruce Chiarelli <[email protected]>
Reported-and-tested-by: Spyros Stathopoulos <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
This patch enforces a rule to always use ACPI_VALIDATE_RSDP_SIG for RSDP
signatures passed from table header or ACPI_SIG_RSDP so that truncated
string comparison can be avoided. This could help to fix the issue that
"RSD " matches but "RSD PTR " doesn't match. Lv Zheng.
Signed-off-by: Lv Zheng <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
This patch fixes an issue that the while loop is not needed as fread()
should return exact the bytes of expected.
The patch is tested by runing diff against the output of "-c" mode and
the normal mode, and only finds the following differences:
1. table addresses: the "-c" mode will always fill 0x0000000000000000 for
the address.
2. RSDP/RSDT/XSDT: there is no generation of such tables for "-c" mode.
So the test result shows the fix is valid. Lv Zheng.
Signed-off-by: Lv Zheng <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
|
|
The command "cpupower frequency-info" can be used when using cpupower to
monitor and test processor behaviour to determine if the processor is
behaving as expected. This data can be compared to the output of
/proc/cpuinfo or the output of
/sys/devices/system/cpu/cpuX/cpufreq/scaling_available_frequencies
to determine if the cpu is in an expected state.
When doing this I noticed comparison test failures due to the way the
data is displayed in cpupower. For example,
[root@intel-s3e37-02 cpupower]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
2262000 2261000 2128000 1995000 1862000 1729000 1596000 1463000 1330000
1197000 1064000
compared to
[root@intel-s3e37-02 cpupower]# cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 1.06 GHz - 2.26 GHz
available frequency steps: 2.26 GHz, 2.26 GHz, 2.13 GHz, 2.00 GHz, 1.86 GHz, 1.73 GHz, 1.60 GHz, 1.46 GHz, 1.33 GHz, 1.20 GHz, 1.06 GHz
available cpufreq governors: conservative, userspace, powersave, ondemand, performance
current policy: frequency should be within 1.06 GHz and 2.26 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 2.26 GHz (asserted by call to hardware).
boost state support:
Supported: yes
Active: yes
shows very different values for the available frequency steps. The cpupower
output rounds off values at 2 decimal points and this causes problems with
test scripts. For example, with the data above,
1.064 is 1.06
1.197 is 1.20
1.596 is 1.60
1.995 is 2.00
2.128 is 2.13
and most confusingly,
2.261 is 2.26
2.262 is 2.26
Truncating these values serves no real purpose other than making the output
pretty. Since the default has been to round off these values I am adding
a -n/--no-rounding option to the cpupower utility that will display the
data without rounding off the still significant digits.
After patch,
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.000 us.
hardware limits: 1.064000 GHz - 2.262000 GHz
available frequency steps: 2.262000 GHz, 2.261000 GHz, 2.128000 GHz, 1.995000 GHz, 1.862000 GHz, 1.729000 GHz, 1.596000 GHz, 1.463000 GHz, 1.330000 GHz, 1.197000 GHz, 1.064000 GHz
available cpufreq governors: conservative, userspace, powersave, ondemand, performance
current policy: frequency should be within 1.064000 GHz and 2.262000 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 2.262000 GHz (asserted by call to hardware).
boost state support:
Supported: yes
Active: yes
Acked-by: Thomas Renninger <[email protected]>
Signed-off-by: Prarit Bhargava <[email protected]>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The Intel 64 and IA-32 Architectures Software Developer's Manual says
that TjMax is stored in bits 23:16 of MSR_TEMPERATURE TARGET (0x1a2).
That's 8 bits, not 7, so it must be masked with 0xFF rather than 0x7F.
The manual has no mention of which values should be considered valid,
which kind of implies that they all are. Arbitrarily discarding values
outside a specific range is wrong. The upper range check had to be
fixed recently (commit 144b44b1) and the lower range check is just as
wrong. See bug #75071:
https://bugzilla.kernel.org/show_bug.cgi?id=75071
There are many Xeon processor series with TjMax of 70, 71 or 80
degrees Celsius, way below the arbitrary 85 degrees Celsius limit.
There may be other (past or future) models with even lower limits.
So drop this arbitrary check. The only value that would be clearly
invalid is 0. Everything else should be accepted.
After these changes, turbostat is aligned with what the coretemp
driver does.
Signed-off-by: Jean Delvare <[email protected]>
Cc: Len Brown <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Pull networking fixes from David Miller:
1) e1000e computes header length incorrectly wrt vlans, fix from Vlad
Yasevich.
2) ns_capable() check in sock_diag netlink code, from Andrew
Lutomirski.
3) Fix invalid queue pairs handling in virtio_net, from Amos Kong.
4) Checksum offloading busted in sxgbe driver due to incorrect
descriptor layout, fix from Byungho An.
5) Fix build failure with SMC_DEBUG set to 2 or larger, from Zi Shen
Lim.
6) Fix uninitialized A and X registers in BPF interpreter, from Alexei
Starovoitov.
7) Fix arch dependencies of candence driver.
8) Fix netlink capabilities checking tree-wide, from Eric W Biederman.
9) Don't dump IFLA_VF_PORTS if netlink request didn't ask for it in
IFLA_EXT_MASK, from David Gibson.
10) IPV6 FIB dump restart doesn't handle table changes that happen
meanwhile, causing the code to loop forever or emit dups, fix from
Kumar Sandararajan.
11) Memory leak on VF removal in bnx2x, from Yuval Mintz.
12) Bug fixes for new Altera TSE driver from Vince Bridgers.
13) Fix route lookup key in SCTP, from Xugeng Zhang.
14) Use BH blocking spinlocks in SLIP, as per a similar fix to CAN/SLCAN
driver. From Oliver Hartkopp.
15) TCP doesn't bump retransmit counters in some code paths, fix from
Eric Dumazet.
16) Clamp delayed_ack in tcp_cubic to prevent theoretical divides by
zero. Fix from Liu Yu.
17) Fix locking imbalance in error paths of HHF packet scheduler, from
John Fastabend.
18) Properly reference the transport module when vsock_core_init() runs,
from Andy King.
19) Fix buffer overflow in cdc_ncm driver, from Bjørn Mork.
20) IP_ECN_decapsulate() doesn't see a correct SKB network header in
ip_tunnel_rcv(), fix from Ying Cai.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
net: macb: Fix race between HW and driver
net: macb: Remove 'unlikely' optimization
net: macb: Re-enable RX interrupt only when RX is done
net: macb: Clear interrupt flags
net: macb: Pass same size to DMA_UNMAP as used for DMA_MAP
ip_tunnel: Set network header properly for IP_ECN_decapsulate()
e1000e: Restrict MDIO Slow Mode workaround to relevant parts
e1000e: Fix issue with link flap on 82579
e1000e: Expand workaround for 10Mb HD throughput bug
e1000e: Workaround for dropped packets in Gig/100 speeds on 82579
net/mlx4_core: Don't issue PCIe speed/width checks for VFs
net/mlx4_core: Load the Eth driver first
net/mlx4_core: Fix slave id computation for single port VF
net/mlx4_core: Adjust port number in qp_attach wrapper when detaching
net: cdc_ncm: fix buffer overflow
Altera TSE: ALTERA_TSE should depend on HAS_DMA
vsock: Make transport the proto owner
net: sched: lock imbalance in hhf qdisc
net: mvmdio: Check for a valid interrupt instead of an error
net phy: Check for aneg completion before setting state to PHY_RUNNING
...
|
|
Into tools/include/linux/compiler.h header.
Acked-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Into perf-sys.h header, as requested by Peter:
http://lkml.kernel.org/r/[email protected]
Adding HAVE_ATTR_TEST define to turn off/on the attribute
test code in the sys_perf_event_open function.
Requested-by: Peter Zijlstra <[email protected]>
Acked-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|