| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://github.com/beaker-project/restraint/issues/215 describes a file
descriptor leak which revealed the test failure described here.
The 'DSO data reopen' perf test assumes that RLIMIT_NOFILE limits the
number of open file descriptors, but it actually limits newly opened
file descriptors. When the file descriptor limit is reduced, file
descriptors already open remain open regardless of the new limit. This
test failure does not occur if open file descriptors are contiguous,
beginning at zero.
The following command triggers this perf test failure.
perf test 'DSO data reopen' 3>/dev/null 8>/dev/null
This patch determines the file descriptor limit by opening four files
and then closing them. The limit is set to the fourth file descriptor,
leaving only the first three available because any newly opened file
descriptor must be less than the limit.
Signed-off-by: Eirik Fuller <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Michael Petlan <[email protected]>
LPU-Reference: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add JSON metrics for Elkhartlake to perf.
Signed-off-by: Jin Yao <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add JSON core events for Elkhartlake to perf.
Based on JSON list v1.02:
https://download.01.org/perfmon/EHL/
Signed-off-by: Jin Yao <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add JSON metrics for Tigerlake to perf.
Based on TMA metrics 4.21 at 01.org.
https://download.01.org/perfmon/
Reviewed-by: Andi Kleen <[email protected]>
Signed-off-by: Jin Yao <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add JSON core events for Tigerlake to perf.
Based on JSON list v1.03:
https://download.01.org/perfmon/TGL/
Reviewed-by: Andi Kleen <[email protected]>
Signed-off-by: Jin Yao <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When users use 'perf annotate' on unsupported machines, error logs
should be printed for user feedback.
Signed-off-by: Li Huafei <[email protected]>
Reviewed-by: James Clark <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Dengcheng Zhu <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin Liška <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Zhang Jinhao <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
On my aarch64 big endian machine, the perf annotate does not work.
# perf annotate
Percent | Source code & Disassembly of [kernel.kallsyms] for cycles (253 samples, percent: local period)
--------------------------------------------------------------------------------------------------------------
Percent | Source code & Disassembly of [kernel.kallsyms] for cycles (1 samples, percent: local period)
------------------------------------------------------------------------------------------------------------
Percent | Source code & Disassembly of [kernel.kallsyms] for cycles (47 samples, percent: local period)
-------------------------------------------------------------------------------------------------------------
...
This is because the arch_find() function uses the normalized architecture
name provided by normalize_arch(), and my machine's architecture name
aarch64_be is not normalized to arm64. Like other architectures such as
arm and powerpc, we can fuzzy match the architecture names associated with
aarch64.* and normalize them.
It seems that there is also arm64_be architecture name, which we also
normalize to arm64.
Signed-off-by: Li Huafei <[email protected]>
Reviewed-by: James Clark <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Dengcheng Zhu <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin Liška <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Zhang Jinhao <[email protected]>
Link: http //lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Previously the code would see if, for example,
tools/perf/arch/arm/include/uapi/asm/errno.h exists and if not generate
a "generic" switch statement using the asm-generic/errno.h.
This creates multiple identical "generic" switch statements before the
default generic switch statement for an unknown architecture.
By simplifying the archlist to be only for architectures that are not
"generic" the amount of generated code can be reduced from 14 down to 6
functions.
Remove the special case of x86, instead reverse the architecture names
so that it comes first.
Committer testing:
$ tools/perf/trace/beauty/arch_errno_names.sh gcc tools > before
Apply this patch and:
$ tools/perf/trace/beauty/arch_errno_names.sh gcc tools > after
14 arches down to 6, that are the ones with an explicit errno.h file:
$ ls -1 tools/arch/*/include/uapi/asm/errno.h
tools/arch/alpha/include/uapi/asm/errno.h
tools/arch/mips/include/uapi/asm/errno.h
tools/arch/parisc/include/uapi/asm/errno.h
tools/arch/powerpc/include/uapi/asm/errno.h
tools/arch/sparc/include/uapi/asm/errno.h
tools/arch/x86/include/uapi/asm/errno.h
$
$ diff -u4 before after
@@ -2099,32 +987,16 @@
const char *arch_syscalls__strerrno(const char *arch, int err)
{
if (!strcmp(arch, "x86"))
return errno_to_name__x86(err);
- if (!strcmp(arch, "alpha"))
- return errno_to_name__alpha(err);
- if (!strcmp(arch, "arc"))
- return errno_to_name__arc(err);
- if (!strcmp(arch, "arm"))
- return errno_to_name__arm(err);
- if (!strcmp(arch, "arm64"))
- return errno_to_name__arm64(err);
- if (!strcmp(arch, "csky"))
- return errno_to_name__csky(err);
- if (!strcmp(arch, "mips"))
- return errno_to_name__mips(err);
- if (!strcmp(arch, "parisc"))
- return errno_to_name__parisc(err);
- if (!strcmp(arch, "powerpc"))
- return errno_to_name__powerpc(err);
- if (!strcmp(arch, "riscv"))
- return errno_to_name__riscv(err);
- if (!strcmp(arch, "s390"))
- return errno_to_name__s390(err);
- if (!strcmp(arch, "sh"))
- return errno_to_name__sh(err);
if (!strcmp(arch, "sparc"))
return errno_to_name__sparc(err);
- if (!strcmp(arch, "xtensa"))
- return errno_to_name__xtensa(err);
+ if (!strcmp(arch, "powerpc"))
+ return errno_to_name__powerpc(err);
+ if (!strcmp(arch, "parisc"))
+ return errno_to_name__parisc(err);
+ if (!strcmp(arch, "mips"))
+ return errno_to_name__mips(err);
+ if (!strcmp(arch, "alpha"))
+ return errno_to_name__alpha(err);
return errno_to_name__generic(err);
}
The rest of the patch is the removal of the errno_to_name__generic()
unneeded clones.
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Place early, as they are in the git Makefile. Remove references to a
'technical` directory that doesn't exist in perf.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
howto-index.sh exists in git but not in perf, as such targets that
depend upon it fail. Remove such failing targets.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
cmd-list.perl exists in git but not in perf. As such these targets fail
with missing dependencies. Remove them.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Enabled to ensure that info pages build.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Perf doesn't have a user-manual.txt, but git does and this explains why
there are references here. Having these references breaks 'make info' as
user-manual.info can't be created given the missing dependency. Remove
all references to user-manual so that 'make info' can succeed.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The doc.dep dependencies for the Makefile fail to build as
build-docdep.perl is missing. Add this file from git.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Before this change 'make perfman.info' fails as cat-texi.perl is
missing. It also fails as the makeinfo output isn't written into the
appropriate file. Add cat-texi.perl from git. Add missing output file
flag for makeinfo.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The TRBE (Trace Buffer Extension) feature allows a separate trace buffer
for each trace source, therefore the trace wouldn't need to be
formatted. The driver was introduced in commit 3fbf7f011f24
("coresight: sink: Add TRBE driver").
The formatted/unformatted mode is encoded in one of the flags of the
AUX record. The first AUX record encountered for each event is used to
determine the mode, and this will persist for the remaining trace that
is either decoded or dumped.
Reviewed-by: Mathieu Poirier <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When dumping trace, the decoder is continually deleted and recreated to
decode each buffer. To support both formatted and unformatted trace in
a later commit, the decoder will be configured in advance.
This commit removes the deletion of the decoder and allows the
formatted/unformatted setting to persist.
Reviewed-by: Mathieu Poirier <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The decoder is quite noisy when being reset. In a future commit,
dump-raw-trace will use a code path that resets the decoder rather than
creating a new one, so printing has to be suppressed to not flood the
output.
Reviewed-by: Mathieu Poirier <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Continually creating queues in cs_etm__process_event() is unnecessary.
They only need to be created when a buffer for a new CPU or thread is
encountered. This can be in two places, when building the queues in
advance in cs_etm__process_auxtrace_info(), or in
cs_etm__process_auxtrace_event() when data_queued is false and the
index wasn't available (pipe mode).
This change will allow the 'formatted' decoder setting to applied when
iterating over aux records in a later commit.
Reviewed-by: Mathieu Poirier <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This refactoring has some benefits:
* Decoding is done to find the timestamp. If we want to print errors
when maps aren't available, then doing it from cs_etm__setup_queue()
may cause warnings to be printed.
* The cs_etm__setup_queue() flow is shared between timed and timeless
modes, so it needs to be guarded by an if statement which can now
be removed.
* Allows moving the setup queues function earlier.
* If data was piped in, then not all queues would be filled so it
wouldn't have worked properly anyway. Now it waits for flush so
data in all queues will be available.
The motivation for this is to decouple setup functions with ones that
involve decoding. That way we can move the setup function earlier when
the formatted/unformatted trace information is available.
Reviewed-by: Mathieu Poirier <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The kernel start address is already cached in the machine struct once it
is initialised, so storing it in the cs_etm struct is unnecessary.
It also depends on kernel maps being available to be initialised.
Therefore cs_etm__setup_queues() isn't an appropriate place to call it
because it could be called before processing starts. It would be better
to initialise it at the point when it is needed, then we can be sure
that all the necessary maps are available. Also by calling
machine__kernel_start() multiple times it can be initialised at some
point, even if it failed to initialise previously due to missing maps.
In a later commit cs_etm__setup_queues() will be moved which is the
motivation for this change.
Reviewed-by: Mathieu Poirier <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As 'enum bpf_cmd' has been extended a lot, update the cmd string table to
decode sys_bpf first arg clearly in perf-trace.
Signed-off-by: Wei Li <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Li Bin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We added check_gcr_el1_cswitch but did not ignore the generated binary,
add it.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
This patch removed the 'raw gso min size - 1' test which
always fails now:
./in_netns.sh ./psock_snd -v -c -g -l "${mss}"
raw gso min size - 1 (expected to fail)
tx: 1524
rx: 1472
OK
After commit 7c6d2ecbda83 ("net: be more gentle about silly
gso requests coming from user"), we relaxed the min gso_size
check in virtio_net_hdr_to_skb().
So when a packet which is smaller then the gso_size,
GSO for this packet will not be set, the packet will be
send/recv successfully.
Signed-off-by: Dust Li <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert "perf map: Fix dso->nsinfo refcounting", this makes 'perf top'
abort, uncovering a design flaw on how namespace information is kept.
The fix for that is more than we can do right now, leave it for the
next merge window.
- Split --dump-raw-trace by AUX records for ARM's CoreSight, fixing up
the decoding of some records.
- Fix PMU alias matching.
Thanks to James Clark and John Garry for these fixes.
* tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
Revert "perf map: Fix dso->nsinfo refcounting"
perf pmu: Fix alias matching
perf cs-etm: Split --dump-raw-trace by AUX records
|
|
Andrii Nakryiko says:
====================
bpf-next 2021-07-30
We've added 64 non-merge commits during the last 15 day(s) which contain
a total of 83 files changed, 5027 insertions(+), 1808 deletions(-).
The main changes are:
1) BTF-guided binary data dumping libbpf API, from Alan.
2) Internal factoring out of libbpf CO-RE relocation logic, from Alexei.
3) Ambient BPF run context and cgroup storage cleanup, from Andrii.
4) Few small API additions for libbpf 1.0 effort, from Evgeniy and Hengqi.
5) bpf_program__attach_kprobe_opts() fixes in libbpf, from Jiri.
6) bpf_{get,set}sockopt() support in BPF iterators, from Martin.
7) BPF map pinning improvements in libbpf, from Martynas.
8) Improved module BTF support in libbpf and bpftool, from Quentin.
9) Bpftool cleanups and documentation improvements, from Quentin.
10) Libbpf improvements for supporting CO-RE on old kernels, from Shuyi.
11) Increased maximum cgroup storage size, from Stanislav.
12) Small fixes and improvements to BPF tests and samples, from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
tools: bpftool: Complete metrics list in "bpftool prog profile" doc
tools: bpftool: Document and add bash completion for -L, -B options
selftests/bpf: Update bpftool's consistency script for checking options
tools: bpftool: Update and synchronise option list in doc and help msg
tools: bpftool: Complete and synchronise attach or map types
selftests/bpf: Check consistency between bpftool source, doc, completion
tools: bpftool: Slightly ease bash completion updates
unix_bpf: Fix a potential deadlock in unix_dgram_bpf_recvmsg()
libbpf: Add btf__load_vmlinux_btf/btf__load_module_btf
tools: bpftool: Support dumping split BTF by id
libbpf: Add split BTF support for btf__load_from_kernel_by_id()
tools: Replace btf__get_from_id() with btf__load_from_kernel_by_id()
tools: Free BTF objects at various locations
libbpf: Rename btf__get_from_id() as btf__load_from_kernel_by_id()
libbpf: Rename btf__load() as btf__load_into_kernel()
libbpf: Return non-null error on failures in libbpf_find_prog_btf_id()
bpf: Emit better log message if bpf_iter ctx arg btf_id == 0
tools/resolve_btfids: Emit warnings and patch zero id for missing symbols
bpf: Increase supported cgroup storage value size
libbpf: Fix race when pinning maps in parallel
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Conflicting commits, all resolutions pretty trivial:
drivers/bus/mhi/pci_generic.c
5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
drivers/nfc/s3fwrn5/firmware.c
a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label")
46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
MAINTAINERS
7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Q1 and Q2 are numbers with *maximum* length of 384 bytes. If the
calculated length of Q1 and Q2 is less than 384 bytes, things will
go wrong.
E.g. if Q2 is 383 bytes, then
1. The bytes of q2 are copied to sigstruct->q2 in calc_q1q2().
2. The entire sigstruct->q2 is reversed, which results it being
256 * Q2, given that the last byte of sigstruct->q2 is added
to before the bytes given by calc_q1q2().
Either change in key or measurement can trigger the bug. E.g. an
unmeasured heap could cause a devastating change in Q1 or Q2.
Reverse exactly the bytes of Q1 and Q2 in calc_q1q2() before returning
to the caller.
Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX")
Link: https://lore.kernel.org/linux-sgx/[email protected]/
Signed-off-by: Tianjia Zhang <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
(mac80211) and netfilter trees.
Current release - regressions:
- mac80211: fix starting aggregation sessions on mesh interfaces
Current release - new code bugs:
- sctp: send pmtu probe only if packet loss in Search Complete state
- bnxt_en: add missing periodic PHC overflow check
- devlink: fix phys_port_name of virtual port and merge error
- hns3: change the method of obtaining default ptp cycle
- can: mcba_usb_start(): add missing urb->transfer_dma initialization
Previous releases - regressions:
- set true network header for ECN decapsulation
- mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
LRO
- phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
PHY
- sctp: fix return value check in __sctp_rcv_asconf_lookup
Previous releases - always broken:
- bpf:
- more spectre corner case fixes, introduce a BPF nospec
instruction for mitigating Spectre v4
- fix OOB read when printing XDP link fdinfo
- sockmap: fix cleanup related races
- mac80211: fix enabling 4-address mode on a sta vif after assoc
- can:
- raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
- j1939: j1939_session_deactivate(): clarify lifetime of session
object, avoid UAF
- fix number of identical memory leaks in USB drivers
- tipc:
- do not blindly write skb_shinfo frags when doing decryption
- fix sleeping in tipc accept routine"
* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
gve: Update MAINTAINERS list
can: esd_usb2: fix memory leak
can: ems_usb: fix memory leak
can: usb_8dev: fix memory leak
can: mcba_usb_start(): add missing urb->transfer_dma initialization
can: hi311x: fix a signedness bug in hi3110_cmd()
MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
bpf: Fix leakage due to insufficient speculative store bypass mitigation
bpf: Introduce BPF nospec instruction for mitigating Spectre v4
sis900: Fix missing pci_disable_device() in probe and remove
net: let flow have same hash in two directions
nfc: nfcsim: fix use after free during module unload
tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
sctp: fix return value check in __sctp_rcv_asconf_lookup
nfc: s3fwrn5: fix undefined parameter values in dev_err()
net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
net/mlx5: Unload device upon firmware fatal error
net/mlx5e: Fix page allocation failure for ptp-RQ over SF
net/mlx5e: Fix page allocation failure for trap-RQ over SF
...
|
|
Profiling programs with bpftool was extended some time ago to support
two new metrics, namely itlb_misses and dtlb_misses (misses for the
instruction/data translation lookaside buffer). Update the manual page
and bash completion accordingly.
Fixes: 450d060e8f75 ("bpftool: Add {i,d}tlb_misses support for bpftool profile")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The -L|--use-loader option for using loader programs when loading, or
when generating a skeleton, did not have any documentation or bash
completion. Same thing goes for -B|--base-btf, used to pass a path to a
base BTF object for split BTF such as BTF for kernel modules.
This patch documents and adds bash completion for those options.
Fixes: 75fa1777694c ("tools/bpftool: Add bpftool support for split BTF")
Fixes: d510296d331a ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Update the script responsible for checking that the different types used
at various places in bpftool are synchronised, and extend it to check
the consistency of options between the help messages in the source code
and the manual pages.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
All bpftool commands support the options for JSON output and debug from
libbpf. In addition, some commands support additional options
corresponding to specific use cases.
The list of options described in the man pages for the different
commands are not always accurate. The messages for interactive help are
mostly limited to HELP_SPEC_OPTIONS, and are even less representative of
the actual set of options supported for the commands.
Let's update the lists:
- HELP_SPEC_OPTIONS is modified to contain the "default" options (JSON
and debug), and to be extensible (no ending curly bracket).
- All commands use HELP_SPEC_OPTIONS in their help message, and then
complete the list with their specific options.
- The lists of options in the man pages are updated.
- The formatting of the list for bpftool.rst is adjusted to match
formatting for the other man pages. This is for consistency, and also
because it will be helpful in a future patch to automatically check
that the files are synchronised.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Update bpftool's list of attach type names to tell it about the latest
attach types, or the "ringbuf" map. Also update the documentation, help
messages, and bash completion when relevant.
These missing items were reported by the newly added Python script used
to help maintain consistency in bpftool.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Whenever the eBPF subsystem gains new elements, such as new program or
map types, it is necessary to update bpftool if we want it able to
handle the new items.
In addition to the main arrays containing the names of these elements in
the source code, there are also multiple locations to update:
- The help message in the do_help() functions in bpftool's source code.
- The RST documentation files.
- The bash completion file.
This has led to omissions multiple times in the past. This patch
attempts to address this issue by adding consistency checks for all
these different locations. It also verifies that the bpf_prog_type,
bpf_map_type and bpf_attach_type enums from the UAPI BPF header have all
their members present in bpftool.
The script requires no argument to run, it reads and parses the
different files to check, and prints the mismatches, if any. It
currently reports a number of missing elements, which will be fixed in a
later patch:
$ ./test_bpftool_synctypes.py
Comparing [...]/linux/tools/bpf/bpftool/map.c (map_type_name) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_MAP_CREATE_TYPES): {'ringbuf'}
Comparing BPF header (enum bpf_attach_type) and [...]/linux/tools/bpf/bpftool/common.c (attach_type_name): {'BPF_TRACE_ITER', 'BPF_XDP_DEVMAP', 'BPF_XDP', 'BPF_SK_REUSEPORT_SELECT', 'BPF_XDP_CPUMAP', 'BPF_SK_REUSEPORT_SELECT_OR_MIGRATE'}
Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/prog.c (do_help() ATTACH_TYPE): {'skb_verdict'}
Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/Documentation/bpftool-prog.rst (ATTACH_TYPE): {'skb_verdict'}
Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_PROG_ATTACH_TYPES): {'skb_verdict'}
Note that the script does NOT check for consistency between the list of
program types that bpftool claims it accepts and the actual list of
keywords that can be used. This is because bpftool does not "see" them,
they are ELF section names parsed by libbpf. It is not hard to parse the
section_defs[] array in libbpf, but some section names are associated
with program types that bpftool cannot load at the moment. For example,
some programs require a BTF target and an attach target that bpftool
cannot handle. The script may be extended to parse the array and check
only relevant values in the future.
The script is not added to the selftests' Makefile, because doing so
would require all patches with BPF UAPI change to also update bpftool.
Instead it is to be added to the CI.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Bash completion for bpftool gets two minor improvements in this patch.
Move the detection of attach types for "bpftool cgroup attach" outside
of the "case/esac" bloc, where we cannot reuse our variable holding the
list of supported attach types as a pattern list. After the change, we
have only one list of cgroup attach types to update when new types are
added, instead of the former two lists.
Also rename the variables holding lists of names for program types, map
types, and attach types, to make them more unique. This can make it
slightly easier to point people to the relevant variables to update, but
the main objective here is to help run a script to check that bash
completion is up-to-date with bpftool's source code.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This makes 'perf top' abort in some cases, and the right fix will
involve surgery that is too much to do at this stage, so revert for now
and fix it in the next merge window.
This reverts commit 2d6b74baa7147251c30a46c4996e8cc224aa2dc5.
Cc: Riccardo Mancini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Krister Johansen <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add two new APIs: btf__load_vmlinux_btf and btf__load_module_btf.
btf__load_vmlinux_btf is just an alias to the existing API named
libbpf_find_kernel_btf, rename to be more precisely and consistent
with existing BTF APIs. btf__load_module_btf can be used to load
module BTF, add it for completeness. These two APIs are useful for
implementing tracing tools and introspection tools. This is part
of the effort towards libbpf 1.0 ([0]).
[0] Closes: https://github.com/libbpf/libbpf/issues/280
Signed-off-by: Hengqi Chen <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Split BTF objects are typically BTF objects for kernel modules, which
are incrementally built on top of kernel BTF instead of redefining all
kernel symbols they need. We can use bpftool with its -B command-line
option to dump split BTF objects. It works well when the handle provided
for the BTF object to dump is a "path" to the BTF object, typically
under /sys/kernel/btf, because bpftool internally calls
btf__parse_split() which can take a "base_btf" pointer and resolve the
BTF reconstruction (although in that case, the "-B" option is
unnecessary because bpftool performs autodetection).
However, it did not work so far when passing the BTF object through its
id, because bpftool would call btf__get_from_id() which did not provide
a way to pass a "base_btf" pointer.
In other words, the following works:
# bpftool btf dump file /sys/kernel/btf/i2c_smbus -B /sys/kernel/btf/vmlinux
But this was not possible:
# bpftool btf dump id 6 -B /sys/kernel/btf/vmlinux
The libbpf API has recently changed, and btf__get_from_id() has been
deprecated in favour of btf__load_from_kernel_by_id() and its version
with support for split BTF, btf__load_from_kernel_by_id_split(). Let's
update bpftool to make it able to dump the BTF object in the second case
as well.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a new API function btf__load_from_kernel_by_id_split(), which takes
a pointer to a base BTF object in order to support split BTF objects
when retrieving BTF information from the kernel.
Reference: https://github.com/libbpf/libbpf/issues/314
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Replace the calls to function btf__get_from_id(), which we plan to
deprecate before the library reaches v1.0, with calls to
btf__load_from_kernel_by_id() in tools/ (bpftool, perf, selftests).
Update the surrounding code accordingly (instead of passing a pointer to
the btf struct, get it as a return value from the function).
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Make sure to call btf__free() (and not simply free(), which does not
free all pointers stored in the struct) on pointers to struct btf
objects retrieved at various locations.
These were found while updating the calls to btf__get_from_id().
Fixes: 999d82cbc044 ("tools/bpf: enhance test_btf file testing to test func info")
Fixes: 254471e57a86 ("tools/bpf: bpftool: add support for func types")
Fixes: 7b612e291a5a ("perf tools: Synthesize PERF_RECORD_* for loaded BPF programs")
Fixes: d56354dc4909 ("perf tools: Save bpf_prog_info and BTF of new BPF programs")
Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Fixes: fa853c4b839e ("perf stat: Enable counting events for BPF programs")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Rename function btf__get_from_id() as btf__load_from_kernel_by_id() to
better indicate what the function does. Change the new function so that,
instead of requiring a pointer to the pointer to update and returning
with an error code, it takes a single argument (the id of the BTF
object) and returns the corresponding pointer. This is more in line with
the existing constructors.
The other tools calling the (soon-to-be) deprecated btf__get_from_id()
function will be updated in a future commit.
References:
- https://github.com/libbpf/libbpf/issues/278
- https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#btfh-apis
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
As part of the effort to move towards a v1.0 for libbpf, rename
btf__load() function, used to "upload" BTF information into the kernel,
as btf__load_into_kernel(). This new name better reflects what the
function does.
References:
- https://github.com/libbpf/libbpf/issues/278
- https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#btfh-apis
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Variable "err" is initialised to -EINVAL so that this error code is
returned when something goes wrong in libbpf_find_prog_btf_id().
However, a recent change in the function made use of the variable in
such a way that it is set to 0 if retrieving linear information on the
program is successful, and this 0 value remains if we error out on
failures at later stages.
Let's fix this by setting err to -EINVAL later in the function.
Fixes: e9fc3ce99b34 ("libbpf: Streamline error reporting for high-level APIs")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Kernel functions referenced by .BTF_ids may be changed from global to static
and get inlined or get renamed/removed, and thus disappears from BTF.
This causes kernel build failure when resolve_btfids do id patch for symbols
in .BTF_ids in vmlinux. Update resolve_btfids to emit warning messages and
patch zero id for missing symbols instead of aborting kernel build process.
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Hengqi Chen <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix MTE shared page detection
- Enable selftest's use of PMU registers when asked to
s390:
- restore 5.13 debugfs names
x86:
- fix sizes for vcpu-id indexed arrays
- fixes for AMD virtualized LAPIC (AVIC)
- other small bugfixes
Generic:
- access tracking performance test
- dirty_log_perf_test command line parsing fix
- Fix selftest use of obsolete pthread_yield() in favour of
sched_yield()
- use cpu_relax when halt polling
- fixed missing KVM_CLEAR_DIRTY_LOG compat ioctl"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: add missing compat KVM_CLEAR_DIRTY_LOG
KVM: use cpu_relax when halt polling
KVM: SVM: use vmcb01 in svm_refresh_apicv_exec_ctrl
KVM: SVM: tweak warning about enabled AVIC on nested entry
KVM: SVM: svm_set_vintr don't warn if AVIC is active but is about to be deactivated
KVM: s390: restore old debugfs names
KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized
KVM: selftests: Introduce access_tracking_perf_test
KVM: selftests: Fix missing break in dirty_log_perf_test arg parsing
x86/kvm: fix vcpu-id indexed array sizes
KVM: x86: Check the right feature bit for MSR_KVM_ASYNC_PF_ACK access
docs: virt: kvm: api.rst: replace some characters
KVM: Documentation: Fix KVM_CAP_ENFORCE_PV_FEATURE_CPUID name
KVM: nSVM: Swap the parameter order for svm_copy_vmrun_state()/svm_copy_vmloadsave_state()
KVM: nSVM: Rename nested_svm_vmloadsave() to svm_copy_vmloadsave_state()
KVM: arm64: selftests: get-reg-list: actually enable pmu regs in pmu sublist
KVM: selftests: change pthread_yield to sched_yield
KVM: arm64: Fix detection of shared VMAs on guest fault
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-07-29
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 14 day(s) which contain
a total of 20 files changed, 446 insertions(+), 138 deletions(-).
The main changes are:
1) Fix UBSAN out-of-bounds splat for showing XDP link fdinfo, from Lorenz Bauer.
2) Fix insufficient Spectre v4 mitigation in BPF runtime, from Daniel Borkmann,
Piotr Krysiuk and Benedict Schlueter.
3) Batch of fixes for BPF sockmap found under stress testing, from John Fastabend.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Recently we added a new option, SKBMOD_F_ECN, to tc-skbmod(8). Add a
control-plane selftest for it.
Depends on kernel patch "net/sched: act_skbmod: Add SKBMOD_F_ECN option
support", as well as iproute2 patch "tc/skbmod: Introduce SKBMOD_F_ECN
option".
Reviewed-by: Cong Wang <[email protected]>
Signed-off-by: Peilin Ye <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Current max cgroup storage value size is 4k (PAGE_SIZE). The other local
storages accept up to 64k (BPF_LOCAL_STORAGE_MAX_VALUE_SIZE). Let's align
max cgroup value size with the other storages.
For percpu, the max is 32k (PCPU_MIN_UNIT_SIZE) because percpu
allocator is not happy about larger values.
netcnt test is extended to exercise those maximum values
(non-percpu max size is close to, but not real max).
v4:
* remove inner union (Andrii Nakryiko)
* keep net_cnt on the stack (Andrii Nakryiko)
v3:
* refine SIZEOF_BPF_LOCAL_STORAGE_ELEM comment (Yonghong Song)
* anonymous struct in percpu_net_cnt & net_cnt (Yonghong Song)
* reorder free (Yonghong Song)
v2:
* cap max_value_size instead of BUILD_BUG_ON (Martin KaFai Lau)
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|