| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Previous behavior is to segfault if there is no CPU PMU table and a
metric is sought. To reproduce compile with NO_JEVENTS=1 then request a
metric, for example, "perf stat -M IPC true".
Committer testing:
Before:
$ make -k NO_JEVENTS=1 BUILD_BPF_SKEL=1 O=/tmp/build/perf-urgent -C tools/perf install-bin
$ perf stat -M IPC true
Segmentation fault (core dumped)
$
After:
$ perf stat -M IPC true
Usage: perf stat [<options>] [<command>]
-M, --metrics <metric/metric group list>
monitor specified metrics or metric groups (separated by ,)
$
Fixes: 00facc760903be66 ("perf jevents: Switch build to use jevents.py")
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kshipra Bopardikar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
After running the nolibc tests, the "git status" is not clean because
the generated files are not ignored. Create a `.gitignore` inside the
selftests/nolibc directory to ignore them.
Cc: Ammar Faizi <[email protected]>
Cc: Fernanda Ma'rouf <[email protected]>
Signed-off-by: Fernanda Ma'rouf <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
It presents the supported targets, and becomes the default target to
save the user from having to read the makefile. The "all" target was
placed after it and now points to "run" to do everything since it's
no longer the default one.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
It's not convenient to rely on a sysroot built in another directory,
especially when running cross-compilation tests, where one has to
switch back and forth between directories.
Let's make it possible to install the sysroot directly in the test
directory. It's not big and even benefits from being copied by arch
so that it's easier to switch between archs if needed. The new
"sysroot" target does this, it just calls "headers_standalone" from
nolibc to install the sysroot right here.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The "run" target will build the kernel and start it in QEMU. The
"rerun" target will not have the kernel dependency and will just try
to start QEMU. The QEMU architecture used to start the kernel is
derived from the configured ARCH. This might need to be improved
for archs which include different variants under the same name
(mips vs mipsel, +/-64, riscv32 vs riscv64). This could be tested
for i386, x86, arm, arm64, mips and riscv (the later two reporting
issues on some tests).
It is possible to pass a test specification for nolibc-test in the TEST
variable, which will be passed as-is as NOLIBC_TEST.
On success, the number of successful tests is printed. On failure, failed
lines are individually printed.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
While most archs will work fine with "make defconfig", not all will
do, and it's not always easy to remember the most suitable choice to
use for a specific architecture.
This adds a "defconfig" target to the Makefile so that one may easily
run "make -C ... defconfig" and make sure to clean and rebuild a fresh
config. This is *not* used by default because we want to preserve the
user's config by default.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The "kernel" target rebuilds the kernel with the current config for the
selected arch, with an initramfs containing the nolibc-test utility.
Since image names depend on the architecture, the currently supported
ones are referenced and resolved based on the architecture.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Adding support for glibc can be useful to distinguish between bugs in
nolibc and bugs in the kernel when a syscall reports an unusual value.
It's not that much work and should not affect the long term
maintainability of the tests. The necessary changes can essentially be
summed up like this:
- set _GNU_SOURCE a the top to access some definitions
- many includes added when we know we don't come from nolibc (missing
the stdio include guard)
- disable gettid() which is not exposed by glibc
- disable gettimeofday's support of bad pointers since these crash
in glibc
- add a simple itoa() for errorname(); strerror() is too verbose (no
way to get short messages). strerrorname_np() was added in modern
glibc (2.32) to do exactly this but that 's too recent to be usable
as the default fallback.
- use the standard ioperm() definition. May be we need to implement
ioperm() in nolibc if that's useful.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
If /proc is not available (program run inside a chroot or without
sufficient permissions), it's better to disable the associated tests.
Some will be preserved like the ones which check for a failure to
create some entries there since they're still supposed to fail.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
Most of the time the program will be run alone in an initramfs. There
is no value in requiring the user to populate /dev and /proc for such
tests, we can do it ourselves, and it participates to the tests at the
same time.
What's done here is that when called as init (getpid()==1) we check
if /dev exists or create it, if /dev/console and /dev/null exists,
otherwise we try to mount a devtmpfs there, and if it fails we fall
back to mknod. The console is reopened if stdout was closed. Finally
/proc is created and mounted if /proc/self cannot be found. This is
sufficient for most tests.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
QEMU, when started with "-device isa-debug-exit -no-reboot" will exit
with status code 2N+1 when N is written to 0x501. This is particularly
convenient for automated tests but this is not portable. As such we
only enable this on x86_64 when pid==1. In addition, this requires an
ioperm() call but in order not to have to define arch-specific syscalls
we just perform the syscall by hand there.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The idea is to ease automated testing under qemu. If the test succeeds
while running as PID 1, indicating the system was booted with init=/test,
let's just power off so that qemu can exit with a successful code. In
other situations it will exit and provoke a panic, which may be caught
for example with CONFIG_PVPANIC.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The test series called "stdlib" covers some libc functions (string,
stdlib etc). By default they are automatically run after "syscall"
but may be requested in argument or in variable NOLIBC_TEST.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This adds 63 tests covering about 34 syscalls. Both successes and
failures are tested. Two tests fail when run as unprivileged user
(link_dir which returns EACCESS instead of EPERM, and chroot which
returns EPERM). One test (execve("/")) expects to fail on EACCESS,
but needs to have valid arguments otherwise the kernel will log a
message. And a few tests require /proc to be mounted.
The code is not pretty since all tests are one-liners, sometimes
resulting in long lines, especially when using compount statements to
preset a line, but it's convenient and doesn't obfuscate the code,
which is important to understand what failed.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
It now becomes possible to pass a string either in argv[1] or in the
NOLIBC_TEST environment variable (the former having precedence), to
specify which tests to run. The format is:
testname[:range]*[,testname...]
Where a range is either a single value or the min and max numbers of the
test IDs in a sequence, delimited by a dash. Multiple ranges are possible.
This should provide enough flexibility to focus on certain failing parts
just by playing with the boot command line in a boot loader or in qemu
depending on what is accessible.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
This creates a "nolibc" selftest that intends to test various parts of
the nolibc component, both in terms of build and execution for a given
architecture.
The aim is for it to be as simple to run as a kernel build, by just
passing the compiler (for the build) and the ARCH (for kernel and
execution).
It brings a basic squeleton made of a single C file that will ease testing
and error reporting. The code will be arranged so that it remains easy to
add basic tests for syscalls or library calls that may rely on a condition
to be executed, and whose result is compared to a value or to an error
with a specific errno value.
Tests will just use a relative line number in switch/case statements as
an index, saving the user from having to maintain arrays and complicated
functions which can often just be one-liners.
MAINTAINERS was updated.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
__NR_mmap2 was used for i386 but it's also needed for other archs such
as RISCV32 or ARM. Let's decide to use it based on the __NR_mmap2
definition as it's not defined on other archs.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
We return -ENOSYS when there's no syscall6() operation, but we must cast
it to void* to avoid a warning.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
The "ld a0, 0(sp)" instruction doesn't build on RISCV32 because that
would load a 64-bit value into a 32-bit register. But argc 32-bit,
not 64, so we ought to use "lw" here. Tested on both RISCV32 and
RISCV64.
Cc: Pranith Kumar <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
As discussed, clarify LKMM not recognizing certain kinds of orderings.
In particular, highlight the fact that LKMM might deliberately make
weaker guarantees than compilers and architectures.
[ paulmck: Fix whitespace issue noted by checkpatch.pl. ]
Link: https://lore.kernel.org/all/YpoW1deb%[email protected]/T/#u
Co-developed-by: Alan Stern <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Signed-off-by: Paul Heidekrüger <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Reviewed-by: Joel Fernandes (Google) <[email protected]>
Cc: Charalampos Mainas <[email protected]>
Cc: Pramod Bhatotia <[email protected]>
Cc: Soham Chakraborty <[email protected]>
Cc: Martin Fink <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
__nf_ct_try_assign_helper() remains in place but it now requires a
template to configure the helper.
A toggle to disable automatic helper assignment was added by:
a9006892643a ("netfilter: nf_ct_helper: allow to disable automatic helper assignment")
in 2012 to address the issues described in "Secure use of iptables and
connection tracking helpers". Automatic conntrack helper assignment was
disabled by:
3bb398d925ec ("netfilter: nf_ct_helper: disable automatic helper assignment")
back in 2016.
This patch removes the sysctl and modparam toggles, users now have to
rely on explicit conntrack helper configuration via ruleset.
Update tools/testing/selftests/netfilter/nft_conntrack_helper.sh to
check that auto-assignment does not happen anymore.
Acked-by: Aaron Conole <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Support dumping info of a cgroup_iter link. This includes
showing the cgroup's id and the order for walking the cgroup
hierarchy. Example output is as follows:
> bpftool link show
1: iter prog 2 target_name bpf_map
2: iter prog 3 target_name bpf_prog
3: iter prog 12 target_name cgroup cgroup_id 72 order self_only
> bpftool -p link show
[{
"id": 1,
"type": "iter",
"prog_id": 2,
"target_name": "bpf_map"
},{
"id": 2,
"type": "iter",
"prog_id": 3,
"target_name": "bpf_prog"
},{
"id": 3,
"type": "iter",
"prog_id": 12,
"target_name": "cgroup",
"cgroup_id": 72,
"order": "self_only"
}
]
Signed-off-by: Hao Luo <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
There is a potential for us to hit a type conflict when including
netinet/tcp.h and sys/socket.h, we can replace both of these includes
with linux/tcp.h and bpf_tcp_helpers.h to avoid this conflict.
Fixes errors like the below when compiling with gcc BPF backend:
In file included from /usr/include/netinet/tcp.h:91,
from progs/connect4_prog.c:11:
/home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: error: conflicting types for 'int8_t'; have 'char'
34 | typedef __INT8_TYPE__ int8_t;
| ^~~~~~
In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155,
from /usr/include/x86_64-linux-gnu/bits/socket.h:29,
from /usr/include/x86_64-linux-gnu/sys/socket.h:33,
from progs/connect4_prog.c:10:
/usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'signed char'}
24 | typedef __int8_t int8_t;
| ^~~~~~
/home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: error: conflicting types for 'int64_t'; have 'long int'
43 | typedef __INT64_TYPE__ int64_t;
| ^~~~~~~
/usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long long int'}
27 | typedef __int64_t int64_t;
| ^~~~~~~
Signed-off-by: James Hilliard <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
There is a potential for us to hit a type conflict when including
netinet/tcp.h with sys/socket.h, we can remove these as they are not
actually needed.
Fixes errors like the below when compiling with gcc BPF backend:
In file included from /usr/include/netinet/tcp.h:91,
from progs/bind4_prog.c:10:
/home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: error: conflicting types for 'int8_t'; have 'char'
34 | typedef __INT8_TYPE__ int8_t;
| ^~~~~~
In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155,
from /usr/include/x86_64-linux-gnu/bits/socket.h:29,
from /usr/include/x86_64-linux-gnu/sys/socket.h:33,
from progs/bind4_prog.c:9:
/usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'signed char'}
24 | typedef __int8_t int8_t;
| ^~~~~~
/home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: error: conflicting types for 'int64_t'; have 'long int'
43 | typedef __INT64_TYPE__ int64_t;
| ^~~~~~~
/usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long long int'}
27 | typedef __int64_t int64_t;
| ^~~~~~~
make: *** [Makefile:537: /home/buildroot/bpf-next/tools/testing/selftests/bpf/bpf_gcc/bind4_prog.o] Error 1
Signed-off-by: James Hilliard <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix PAT on Xen, which caused i915 driver failures
- Fix compat INT 80 entry crash on Xen PV guests
- Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs
- Fix RSB stuffing regressions
- Fix ORC unwinding on ftrace trampolines
- Add Intel Raptor Lake CPU model number
- Fix (work around) a SEV-SNP bootloader bug providing bogus values in
boot_params->cc_blob_address, by ignoring the value on !SEV-SNP
bootups.
- Fix SEV-SNP early boot failure
- Fix the objtool list of noreturn functions and annotate snp_abort(),
which bug confused objtool on gcc-12.
- Fix the documentation for retbleed
* tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/ABI: Mention retbleed vulnerability info file for sysfs
x86/sev: Mark snp_abort() noreturn
x86/sev: Don't use cc_platform_has() for early SEV-SNP calls
x86/boot: Don't propagate uninitialized boot_params->cc_blob_address
x86/cpu: Add new Raptor Lake CPU model number
x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry
x86/nospec: Fix i386 RSB stuffing
x86/nospec: Unwreck the RSB stuffing
x86/bugs: Add "unknown" reporting for MMIO Stale Data
x86/entry: Fix entry_INT80_compat for Xen PV guests
x86/PAT: Have pat_enabled() properly reflect state when running on Xen
|
|
Capitalize topdown metrics' names to follow the intel SDM.
Before:
# ./perf stat -a sleep 1
Performance counter stats for 'system wide':
228,094.05 msec cpu-clock # 225.026 CPUs utilized
842 context-switches # 3.691 /sec
224 cpu-migrations # 0.982 /sec
70 page-faults # 0.307 /sec
23,164,105 cycles # 0.000 GHz
29,403,446 instructions # 1.27 insn per cycle
5,268,185 branches # 23.097 K/sec
33,239 branch-misses # 0.63% of all branches
136,248,990 slots # 597.337 K/sec
32,976,450 topdown-retiring # 24.2% retiring
4,651,918 topdown-bad-spec # 3.4% bad speculation
26,148,695 topdown-fe-bound # 19.2% frontend bound
72,515,776 topdown-be-bound # 53.2% backend bound
6,008,540 topdown-heavy-ops # 4.4% heavy operations # 19.8% light operations
3,934,049 topdown-br-mispredict # 2.9% branch mispredict # 0.5% machine clears
16,655,439 topdown-fetch-lat # 12.2% fetch latency # 7.0% fetch bandwidth
41,635,972 topdown-mem-bound # 30.5% memory bound # 22.7% Core bound
1.013634593 seconds time elapsed
After:
# ./perf stat -a sleep 1
Performance counter stats for 'system wide':
228,081.94 msec cpu-clock # 225.003 CPUs utilized
824 context-switches # 3.613 /sec
224 cpu-migrations # 0.982 /sec
67 page-faults # 0.294 /sec
22,647,423 cycles # 0.000 GHz
28,870,551 instructions # 1.27 insn per cycle
5,167,099 branches # 22.655 K/sec
32,383 branch-misses # 0.63% of all branches
133,411,074 slots # 584.926 K/sec
32,352,607 topdown-retiring # 24.3% Retiring
4,456,977 topdown-bad-spec # 3.3% Bad Speculation
25,626,487 topdown-fe-bound # 19.2% Frontend Bound
70,955,316 topdown-be-bound # 53.2% Backend Bound
5,834,844 topdown-heavy-ops # 4.4% Heavy Operations # 19.9% Light Operations
3,738,781 topdown-br-mispredict # 2.8% Branch Mispredict # 0.5% Machine Clears
16,286,803 topdown-fetch-lat # 12.2% Fetch Latency # 7.0% Fetch Bandwidth
40,802,069 topdown-mem-bound # 30.6% Memory Bound # 22.6% Core Bound
1.013683125 seconds time elapsed
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Xing Zhengjun <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Update the documentation to reflect the kernel changes.
Signed-off-by: Kan Liang <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
An array of strings is passed to cmd_record but not freed. As
cmd_record modifies the array, add another array as a copy that can be
mutated allowing the original array contents to all be freed.
Detected with -fsanitize=address.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The Intel hybrid description is written in a different style than the
rest of the perf record man page. There were some new command line
options added after it which resulted in very strange section ordering.
Move the hybrid include last.
Also the sub sections in the hybrid document don't fit the record
manpage well (especially since it talks about all kinds of unrelated
commands). I left this for now, but would be better to separate this
properly in the different man pages.
It would be better to use sub sections for the other sections, but these
don't seem to be supported in AsciiDoc?
Some of the examples are still misrendered in the manpage with an
indented troff command, but I don't know how to fix that.
In any case it's now better than before.
Signed-off-by: Andi Kleen <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Breaking a weak group requires multiple passes of an evlist, with
multiple runs this can introduce bugs ultimately leading to
segfaults. Add a test to cover this.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If a weak group is broken then the reset_group flag remains set for
the next run. Having reset_group set means the counter isn't created
and ultimately a segfault.
A simple reproduction of this is:
# perf stat -r2 -e '{cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles}:W
which will be added as a test in the next patch.
Fixes: 4804e0111662d7d8 ("perf stat: Use affinity for opening events")
Reviewed-by: Andi Kleen <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Xing Zhengjun <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes from:
ae3b1da95413614f ("KVM: arm64: Fix compile error due to sign extension")
That doesn't result in any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The previous change to Python autodetection had a small mistake where
the auto value was used to determine the Python binary, rather than the
user supplied value. The Python binary is only used for one part of the
build process, rather than the final linking, so it was producing
correct builds in most scenarios, especially when the auto detected
value matched what the user wanted, or the system only had a valid set
of Pythons.
Change it so that the Python binary path is derived from either the
PYTHON_CONFIG value or PYTHON value, depending on what is specified by
the user. This was the original intention.
This error was spotted in a build failure an odd cross compilation
environment after commit 4c41cb46a732fe82 ("perf python: Prefer
python3") was merged.
Fixes: 630af16eee495f58 ("perf tools: Use Python devtools for version autodetection rather than runtime")
Signed-off-by: James Clark <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Address a few typos in the documentation for the BPF helper functions.
They were reported by Jakub [0], who ran spell checkers on the generated
man page [1].
[0] https://lore.kernel.org/linux-man/[email protected]/T/#mb02e7d4b7fb61d98fa914c77b581184e9a9537af
[1] https://lore.kernel.org/linux-man/[email protected]/T/#m4a8d1b003616928013ffcd1450437309ab652f9f
v3: Do not copy unrelated (and breaking) elements to tools/ header
v2: Turn a ',' into a ';'
Reported-by: Jakub Wilk <[email protected]>
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Due to bpf_map_lookup_elem being declared static we need to also
declare subprog_noise as static.
Fixes the following error:
progs/tailcall_bpf2bpf4.c:26:9: error: 'bpf_map_lookup_elem' is static but used in inline function 'subprog_noise' which is not static [-Werror]
26 | bpf_map_lookup_elem(&nop_table, &key);
| ^~~~~~~~~~~~~~~~~~~
Signed-off-by: James Hilliard <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The sys/socket.h header isn't required to build test_tc_dtime and may
cause a type conflict.
Fixes the following error:
In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155,
from /usr/include/x86_64-linux-gnu/bits/socket.h:29,
from /usr/include/x86_64-linux-gnu/sys/socket.h:33,
from progs/test_tc_dtime.c:18:
/usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: error: conflicting types for 'int8_t'; have '__int8_t' {aka 'signed char'}
24 | typedef __int8_t int8_t;
| ^~~~~~
In file included from progs/test_tc_dtime.c:5:
/home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'char'}
34 | typedef __INT8_TYPE__ int8_t;
| ^~~~~~
/usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: error: conflicting types for 'int64_t'; have '__int64_t' {aka 'long long int'}
27 | typedef __int64_t int64_t;
| ^~~~~~~
/home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long int'}
43 | typedef __INT64_TYPE__ int64_t;
| ^~~~~~~
make: *** [Makefile:537: /home/buildroot/bpf-next/tools/testing/selftests/bpf/bpf_gcc/test_tc_dtime.o] Error 1
Signed-off-by: James Hilliard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Daniel borkmann says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 14 day(s) which contain
a total of 13 files changed, 61 insertions(+), 24 deletions(-).
The main changes are:
1) Fix BPF verifier's precision tracking around BPF ring buffer, from Kumar Kartikeya Dwivedi.
2) Fix regression in tunnel key infra when passing FLOWI_FLAG_ANYSRC, from Eyal Birger.
3) Fix insufficient permissions for bpf_sys_bpf() helper, from YiFei Zhu.
4) Fix splat from hitting BUG when purging effective cgroup programs, from Pu Lehui.
5) Fix range tracking for array poke descriptors, from Daniel Borkmann.
6) Fix corrupted packets for XDP_SHARED_UMEM in aligned mode, from Magnus Karlsson.
7) Fix NULL pointer splat in BPF sockmap sk_msg_recvmsg(), from Liu Jian.
8) Add READ_ONCE() to bpf_jit_limit when reading from sysctl, from Kuniyuki Iwashima.
9) Add BPF selftest lru_bug check to s390x deny list, from Daniel Müller.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
This allows to have a better control over maps from the kernel when
preloading eBPF programs.
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This selftest is designed to cover execute-only protections
on the Radix MMU but will also work with Hash.
The tests are based on those found in pkey_exec_test with modifications
to use the generic mprotect() instead of the pkey variants.
Signed-off-by: Nicholas Miehlbradt <[email protected]>
Signed-off-by: Russell Currey <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
bpf_cgroup_iter_order is globally visible but the entries do not have
CGROUP prefix. As requested by Andrii, put a CGROUP in the names
in bpf_cgroup_iter_order.
This patch fixes two previous commits: one introduced the API and
the other uses the API in bpf selftest (that is, the selftest
cgroup_hierarchical_stats).
I tested this patch via the following command:
test_progs -t cgroup,iter,btf_dump
Fixes: d4ccaf58a847 ("bpf: Introduce cgroup iter")
Fixes: 88886309d2e8 ("selftests/bpf: add a selftest for cgroup hierarchical stats collection")
Suggested-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Hao Luo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()")
c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer")
https://lore.kernel.org/all/[email protected]/
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter (with one broken Fixes tag).
Current release - new code bugs:
- dsa: don't dereference NULL extack in dsa_slave_changeupper()
- dpaa: fix <1G ethernet on LS1046ARDB
- neigh: don't call kfree_skb() under spin_lock_irqsave()
Previous releases - regressions:
- r8152: fix the RX FIFO settings when suspending
- dsa: microchip: keep compatibility with device tree blobs with no
phy-mode
- Revert "net: macsec: update SCI upon MAC address change."
- Revert "xfrm: update SA curlft.use_time", comply with RFC 2367
Previous releases - always broken:
- netfilter: conntrack: work around exceeded TCP receive window
- ipsec: fix a null pointer dereference of dst->dev on a metadata dst
in xfrm_lookup_with_ifid
- moxa: get rid of asymmetry in DMA mapping/unmapping
- dsa: microchip: make learning configurable and keep it off while
standalone
- ice: xsk: prohibit usage of non-balanced queue id
- rxrpc: fix locking in rxrpc's sendmsg
Misc:
- another chunk of sysctl data race silencing"
* tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
net: lantiq_xrx200: restore buffer if memory allocation failed
net: lantiq_xrx200: fix lock under memory pressure
net: lantiq_xrx200: confirm skb is allocated before using
net: stmmac: work around sporadic tx issue on link-up
ionic: VF initial random MAC address if no assigned mac
ionic: fix up issues with handling EAGAIN on FW cmds
ionic: clear broken state on generation change
rxrpc: Fix locking in rxrpc's sendmsg
net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2
MAINTAINERS: rectify file entry in BONDING DRIVER
i40e: Fix incorrect address type for IPv6 flow rules
ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
net: Fix a data-race around sysctl_somaxconn.
net: Fix a data-race around netdev_unregister_timeout_secs.
net: Fix a data-race around gro_normal_batch.
net: Fix data-races around sysctl_devconf_inherit_init_net.
net: Fix data-races around sysctl_fb_tunnels_only_for_init_net.
net: Fix a data-race around netdev_budget_usecs.
net: Fix data-races around sysctl_max_skb_frags.
net: Fix a data-race around netdev_budget.
...
|
|
Assinging will drop all previous tests.
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Adel Abouchaev <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a test to ensure we do mark_chain_precision for the argument type
ARG_CONST_ALLOC_SIZE_OR_ZERO. For other argument types, this was already
done, but propagation for missing for this case. Without the fix, this
test case loads successfully.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When `data` points to a boolean value, casting it to `int *` is problematic
and could lead to a wrong value being passed to `jsonw_bool`. Change the
cast to `bool *` instead.
Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality")
Signed-off-by: Lam Thai <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a selftest that tests the whole workflow for collecting,
aggregating (flushing), and displaying cgroup hierarchical stats.
TL;DR:
- Userspace program creates a cgroup hierarchy and induces memcg reclaim
in parts of it.
- Whenever reclaim happens, vmscan_start and vmscan_end update
per-cgroup percpu readings, and tell rstat which (cgroup, cpu) pairs
have updates.
- When userspace tries to read the stats, vmscan_dump calls rstat to flush
the stats, and outputs the stats in text format to userspace (similar
to cgroupfs stats).
- rstat calls vmscan_flush once for every (cgroup, cpu) pair that has
updates, vmscan_flush aggregates cpu readings and propagates updates
to parents.
- Userspace program makes sure the stats are aggregated and read
correctly.
Detailed explanation:
- The test loads tracing bpf programs, vmscan_start and vmscan_end, to
measure the latency of cgroup reclaim. Per-cgroup readings are stored in
percpu maps for efficiency. When a cgroup reading is updated on a cpu,
cgroup_rstat_updated(cgroup, cpu) is called to add the cgroup to the
rstat updated tree on that cpu.
- A cgroup_iter program, vmscan_dump, is loaded and pinned to a file, for
each cgroup. Reading this file invokes the program, which calls
cgroup_rstat_flush(cgroup) to ask rstat to propagate the updates for all
cpus and cgroups that have updates in this cgroup's subtree. Afterwards,
the stats are exposed to the user. vmscan_dump returns 1 to terminate
iteration early, so that we only expose stats for one cgroup per read.
- An ftrace program, vmscan_flush, is also loaded and attached to
bpf_rstat_flush. When rstat flushing is ongoing, vmscan_flush is invoked
once for each (cgroup, cpu) pair that has updates. cgroups are popped
from the rstat tree in a bottom-up fashion, so calls will always be
made for cgroups that have updates before their parents. The program
aggregates percpu readings to a total per-cgroup reading, and also
propagates them to the parent cgroup. After rstat flushing is over, all
cgroups will have correct updated hierarchical readings (including all
cpus and all their descendants).
- Finally, the test creates a cgroup hierarchy and induces memcg reclaim
in parts of it, and makes sure that the stats collection, aggregation,
and reading workflow works as expected.
Signed-off-by: Yosry Ahmed <[email protected]>
Signed-off-by: Hao Luo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This patch extends bpf selft cgroup_helpers [ID] n various ways:
- Add enable_controllers() that allows tests to enable all or a
subset of controllers for a specific cgroup.
- Add join_cgroup_parent(). The cgroup workdir is based on the pid,
therefore a spawned child cannot join the same cgroup hierarchy of the
test through join_cgroup(). join_cgroup_parent() is used in child
processes to join a cgroup under the parent's workdir.
- Add write_cgroup_file() and write_cgroup_file_parent() (similar to
join_cgroup_parent() above).
- Add get_root_cgroup() for tests that need to do checks on root cgroup.
- Distinguish relative and absolute cgroup paths in function arguments.
Now relative paths are called relative_path, and absolute paths are
called cgroup_path.
Signed-off-by: Yosry Ahmed <[email protected]>
Signed-off-by: Hao Luo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a selftest for cgroup_iter. The selftest creates a mini cgroup tree
of the following structure:
ROOT (working cgroup)
|
PARENT
/ \
CHILD1 CHILD2
and tests the following scenarios:
- invalid cgroup fd.
- pre-order walk over descendants from PARENT.
- post-order walk over descendants from PARENT.
- walk of ancestors from PARENT.
- process only a single object (i.e. PARENT).
- early termination.
Acked-by: Yonghong Song <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Hao Luo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Hao Luo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Mark both the function prototype and definition as noreturn in order to
prevent the compiler from doing transformations which confuse objtool
like so:
vmlinux.o: warning: objtool: sme_enable+0x71: unreachable instruction
This triggers with gcc-12.
Add it and sev_es_terminate() to the objtool noreturn tracking array
too. Sort it while at it.
Suggested-by: Michael Matz <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|