| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For count-local benchmark, use producer_cnt instead of consumer_cnt when
allocating local counter array.
Signed-off-by: Hou Tao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Currently the MM selftests attempt to work out the target architecture by
using CROSS_COMPILE or otherwise querying the host machine, storing the
target architecture in a variable called MACHINE rather than the usual
ARCH though as far as I can tell (including for x86_64) the value is the
same as we would use for architecture.
When cross compiling with LLVM we don't need a CROSS_COMPILE as LLVM can
support many target architectures in a single build so this logic does not
work, CROSS_COMPILE is not set and we end up selecting tests for the host
rather than target architecture. Fix this by using the more standard ARCH
to describe the architecture, taking it from the environment if specified.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Tom Rix <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This allows to do more centralized decisions later on, and generally
makes it very explicit which maps are privileged and which are not
(e.g., LRU_HASH and LRU_PERCPU_HASH, which are privileged HASH variants,
as opposed to unprivileged HASH and HASH_PERCPU; now this is explicit
and easy to verify).
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Assertions reports are split into two parts, the exact file and location
of the condition and then the stack trace printed from
btrfs_assertfail(). This means all the stack traces report the same line
and this is what's typically reported by various tools, making it harder
to distinguish the reports.
[403.2467] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4259
[403.2479] ------------[ cut here ]------------
[403.2484] kernel BUG at fs/btrfs/messages.c:259!
[403.2488] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[403.2493] CPU: 2 PID: 23202 Comm: umount Not tainted 6.2.0-rc4-default+ #67
[403.2499] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014
[403.2509] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs]
...
[403.2595] Call Trace:
[403.2598] <TASK>
[403.2601] btrfs_free_block_groups.cold+0x52/0xae [btrfs]
[403.2608] close_ctree+0x6c2/0x761 [btrfs]
[403.2613] ? __wait_for_common+0x2b8/0x360
[403.2618] ? btrfs_cleanup_one_transaction.cold+0x7a/0x7a [btrfs]
[403.2626] ? mark_held_locks+0x6b/0x90
[403.2630] ? lockdep_hardirqs_on_prepare+0x13d/0x200
[403.2636] ? __call_rcu_common.constprop.0+0x1ea/0x3d0
[403.2642] ? trace_hardirqs_on+0x2d/0x110
[403.2646] ? __call_rcu_common.constprop.0+0x1ea/0x3d0
[403.2652] generic_shutdown_super+0xb0/0x1c0
[403.2657] kill_anon_super+0x1e/0x40
[403.2662] btrfs_kill_super+0x25/0x30 [btrfs]
[403.2668] deactivate_locked_super+0x4c/0xc0
By making btrfs_assertfail a macro we'll get the same line number for
the BUG output:
[63.5736] assertion failed: 0, in fs/btrfs/super.c:1572
[63.5758] ------------[ cut here ]------------
[63.5782] kernel BUG at fs/btrfs/super.c:1572!
[63.5807] invalid opcode: 0000 [#2] PREEMPT SMP KASAN
[63.5831] CPU: 0 PID: 859 Comm: mount Tainted: G D 6.3.0-rc7-default+ #2062
[63.5868] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
[63.5905] RIP: 0010:btrfs_mount+0x24/0x30 [btrfs]
[63.5964] RSP: 0018:ffff88800e69fcd8 EFLAGS: 00010246
[63.5982] RAX: 000000000000002d RBX: ffff888008fc1400 RCX: 0000000000000000
[63.6004] RDX: 0000000000000000 RSI: ffffffffb90fd868 RDI: ffffffffbcc3ff20
[63.6026] RBP: ffffffffc081b200 R08: 0000000000000001 R09: ffff88800e69fa27
[63.6046] R10: ffffed1001cd3f44 R11: 0000000000000001 R12: ffff888005a3c370
[63.6062] R13: ffffffffc058e830 R14: 0000000000000000 R15: 00000000ffffffff
[63.6081] FS: 00007f7b3561f800(0000) GS:ffff88806c600000(0000) knlGS:0000000000000000
[63.6105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63.6120] CR2: 00007fff83726e10 CR3: 0000000002a9e000 CR4: 00000000000006b0
[63.6137] Call Trace:
[63.6143] <TASK>
[63.6148] legacy_get_tree+0x80/0xd0
[63.6158] vfs_get_tree+0x43/0x120
[63.6166] do_new_mount+0x1f3/0x3d0
[63.6176] ? do_add_mount+0x140/0x140
[63.6187] ? cap_capable+0xa4/0xe0
[63.6197] path_mount+0x223/0xc10
This comes at a cost of bloating the final btrfs.ko module due all the
inlining, as long as assertions are compiled in. This is a must for
debugging builds but this is often enabled on release builds too.
Release build:
text data bss dec hex filename
1251676 20317 16088 1288081 13a791 pre/btrfs.ko
1260612 29473 16088 1306173 13ee3d post/btrfs.ko
DELTA: +8936
CC: Josh Poimboeuf <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Add a utility 'lsdexcr' to print the current DEXCR status. Useful for
quickly checking the status such as when debugging test failures or
verifying the new default DEXCR does what you want (for userspace at
least). Example output:
# ./lsdexcr
uDEXCR: 04000000 (NPHIE)
HDEXCR: 00000000
Effective: 04000000 (NPHIE)
SBHE (0): clear (Speculative branch hint enable)
IBRTPD (3): clear (Indirect branch recurrent target ...)
SRAPD (4): clear (Subroutine return address ...)
NPHIE * (5): set (Non-privileged hash instruction enable)
PHIE (6): clear (Privileged hash instruction enable)
DEXCR[NPHIE] enabled: hashst/hashchk working
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Test the kernel DEXCR[NPHIE] interface and hashchk exception handling.
Introduces with it a DEXCR utils library for common DEXCR operations.
Volatile is used to prevent the compiler optimising away the signal
tests.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Adds _MSG assertion variants to provide more context behind why a
failure occurred. Also include unistd.h for _exit() and stdio.h for
fprintf(), and move ARRAY_SIZE macro to utils.h.
The _MSG variants and ARRAY_SIZE will be used by the following
DEXCR selftests.
Signed-off-by: Benjamin Gray <[email protected]>
Reviewed-by: Russell Currey <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Test that target gets created by register_sysctl_mount_point and that no
additional target can be created "on top" of a permanently empty sysctl
table.
Create a mount point target (mnt) in the sysctl test driver; try to
create another on top of that (mnt_error). Output an error if
"mnt_error" is present when we run the sysctl selftests.
Signed-off-by: Joel Granados <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
Tests were being skipped because the target was not present. Add a flag
that controls whether to skip a test based on the presence of the target.
Actually skip tests in the test_case function with a "return" instead of
a "continue".
Signed-off-by: Joel Granados <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
Add a test that checks that the unregistered directory is removed from
/proc/sys/debug
Signed-off-by: Joel Granados <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
The functions get_test_{count,enabled,target} use awk to get the N'th
field in the ALL_TESTS variable. A variable with leading zeros (e.g.
0009) is misinterpreted as an entire line instead of the N'th field.
Remove the leading zeros so this does not happen. We can now use the
helper in tests 6, 7 and 8.
Signed-off-by: Joel Granados <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
In some architectures we can't encode the PMU number in
perf_event_attr.type and thus can't just ask for the same event in
multiple CPUs (and thus PMUs), that is what we want in hybrid systems
but we can't when that encoding isn't understood by the kernel, such as
in ARM64's big.LITTLE.
If that is the case, fallback to the previous behaviour till we find a
better solution to have consistent output accross architectures with
hybrid CPU configurations.
Co-developed-with: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/linux-perf-users/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Will be used when checking if we can encode the PMU number in
perf_event_attr.type, part of the logic to use in hybrid systems
(multiple types of CPUs, such as Intel's (Alder Lake, etc) or ARM's
big.LITTLE).
Co-developed-with: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/linux-perf-users/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
obsolescent "fgrep"
There exists the following warning when executing 'perf test record+probe_libc_inet_pton.sh':
fgrep: warning: fgrep is obsolescent; using grep -F
This is tested on Fedora 38, the version of grep is 3.8, the latest
version of grep claims the fgrep is obsolete, use "grep -F" instead of
"fgrep" to silence the warning.
Signed-off-by: Tiezhu Yang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Scanning only core PMUs is not sufficient on platforms like AMD since
perf mem on AMD uses IBS OP PMU, which is independent of core PMU.
Scan all PMUs instead of just core PMUs. There should be negligible
performance overhead because of scanning all PMUs, so we should be okay.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Ravi Bangoria <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ali Saidi <[email protected]>
Cc: Ananth Narayan <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Santosh Shukla <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
perf mem/c2c on AMD internally uses IBS OP PMU, not the core PMU. Also,
AMD platforms does not have heterogeneous PMUs.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Ravi Bangoria <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ali Saidi <[email protected]>
Cc: Ananth Narayan <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Santosh Shukla <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Added the improved comment for perf_pmus__num_mem_pmus() as b4 didn't from the per-patch (not series) newer version ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Notion of 'core_pmus' and 'other_pmus' are independent of hw core and
uncore pmus. For example, AMD IBS PMUs are present in each SMT-thread
but they belongs to 'other_pmus'. Add a comment describing what these
list contains and how they are treated.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Ravi Bangoria <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ali Saidi <[email protected]>
Cc: Ananth Narayan <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Santosh Shukla <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When -r option is used, perf stat runs the command multiple times and
update stats in the evsel->stats.res_stats for global aggregation. But
the value is never used and the value it prints at the end is just the
value from the last run. I think we should print the average number of
multiple runs.
Add evlist__copy_res_stats() to update the aggr counter (for display)
using the values in the evsel->stats.res_stats.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When it runs multiple times with -r option, it missed to reset the
aggregation counters and the values were added up. The aggregation
count has the values to be printed in the end. It should reset the
counters at the beginning of each run. But the current code does that
only when -I/--interval-print option is given.
Fixes: 91f85f98da7ab8c3 ("perf stat: Display event stats using aggr counts")
Reported-by: Jiri Olsa <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In linux-next tree the many test cases fail on s390x when running the
perf test suite, sometime the perf tool dumps core.
Output before:
6.1: Test event parsing : FAILED!
10.3: Parsing of PMU event table metrics : FAILED!
10.4: Parsing of PMU event table metrics with fake PMUs: FAILED!
17: Setup struct perf_event_attr : FAILED!
24: Number of exit events of a simple workload : FAILED!
26: Object code reading : FAILED!
28: Use a dummy software event to keep tracking : FAILED!
35: Track with sched_switch : FAILED!
42.3: BPF prologue generation : FAILED!
66: Parse and process metrics : FAILED!
68: Event expansion for cgroups : FAILED!
69.2: Perf time to TSC : FAILED!
74: build id cache operations : FAILED!
86: Zstd perf.data compression/decompression : FAILED!
87: perf record tests : FAILED!
106: Test java symbol : FAILED!
The reason for all these failure is a missing PMU. On s390x the PMU is
named cpum_cf which is not detected as core PMU. A similar patch was
added before, see commit 9bacbced0e32204d ("perf list: Add s390 support
for detailed PMU event description") which got lost during the recent
reworks. Add it again.
Output after:
10.2: PMU event map aliases : FAILED!
42.3: BPF prologue generation : FAILED!
Most test cases now work and there is not core dump anymore.
Signed-off-by: Thomas Richter <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It is currently possible to use --symfs along with a vmlinux which lies
outside of the symfs by passing an absolute path to --vmlinux, thanks to
the check in dso__load_vmlinux() which handles this explicitly.
However, the annotate code lacks this check and thus 'perf annotate'
does not work ("Internal error: Invalid -1 error code") for kernel
functions with this combination. Add the missing handling.
Signed-off-by: Vincent Whitchurch <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add the default tags for Hisi hip08 as well.
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a new test case to verify the standard 'perf stat' output with
different options.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
These functions can be shared with the stat std output test.
There is no functional change.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In the default mode, the current output of the metricgroup include both
events and metrics, which is not necessary and just makes the output
hard to read. Since different ARCHs (even different generations in the
same ARCH) may use different events. The output also vary on different
platforms.
For a metricgroup, only outputting the value of each metric is good
enough.
Add a new field default_metricgroup in evsel to indicate an event of the
default metricgroup. For those events, printout() should print the
metricgroup name rather than each event.
Add perf_stat__skip_metric_event() to skip the evsel in the Default
metricgroup, if it's not running or not the metric event.
Add print_metricgroup_header_t to pass the functions which print the
display name of each metricgroup in the Default metricgroup. Support all
three output methods.
Factor out perf_stat__print_shadow_stats_metricgroup() to print out each
metrics.
On SPR:
Before:
./perf_old stat sleep 1
Performance counter stats for 'sleep 1':
0.54 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
68 page-faults:u # 125.445 K/sec
540,970 cycles:u # 0.998 GHz
556,325 instructions:u # 1.03 insn per cycle
123,602 branches:u # 228.018 M/sec
6,889 branch-misses:u # 5.57% of all branches
3,245,820 TOPDOWN.SLOTS:u # 18.4 % tma_backend_bound
# 17.2 % tma_retiring
# 23.1 % tma_bad_speculation
# 41.4 % tma_frontend_bound
564,859 topdown-retiring:u
1,370,999 topdown-fe-bound:u
603,271 topdown-be-bound:u
744,874 topdown-bad-spec:u
12,661 INT_MISC.UOP_DROPPING:u # 23.357 M/sec
1.001798215 seconds time elapsed
0.000193000 seconds user
0.001700000 seconds sys
After:
$ ./perf stat sleep 1
Performance counter stats for 'sleep 1':
0.51 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
68 page-faults:u # 132.683 K/sec
545,228 cycles:u # 1.064 GHz
555,509 instructions:u # 1.02 insn per cycle
123,574 branches:u # 241.120 M/sec
6,957 branch-misses:u # 5.63% of all branches
TopdownL1 # 17.5 % tma_backend_bound
# 22.6 % tma_bad_speculation
# 42.7 % tma_frontend_bound
# 17.1 % tma_retiring
TopdownL2 # 21.8 % tma_branch_mispredicts
# 11.5 % tma_core_bound
# 13.4 % tma_fetch_bandwidth
# 29.3 % tma_fetch_latency
# 2.7 % tma_heavy_operations
# 14.5 % tma_light_operations
# 0.8 % tma_machine_clears
# 6.1 % tma_memory_bound
1.001712086 seconds time elapsed
0.000151000 seconds user
0.001618000 seconds sys
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The new default mode will print the metrics as a metric group. The
metrics from the same metric group must be adjacent to each other in the
metric list. But the metric_list_cmp() sorts metrics by the number of
events.
Add a new sort for the Default metricgroup, which sorts by
default_metricgroup_name and metric_name.
Add is_default in the struct metric_event to indicate that it's from
the Default metricgroup.
Store the displayed metricgroup name of the Default metricgroup into
the metric expr for output.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
SYSFS_PATH can be used locally and globally, especially that has
the same content.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Add a selftest for CMMA migration on s390.
The tests cover:
- interaction of dirty tracking and migration mode, see my recent patch
"KVM: s390: disable migration mode when dirty tracking is disabled" [1],
- several invalid calls of KVM_S390_GET_CMMA_BITS, for example: invalid
flags, CMMA support off, with/without peeking
- ensure KVM_S390_GET_CMMA_BITS initally reports all pages as dirty,
- ensure KVM_S390_GET_CMMA_BITS properly skips over holes in memslots, but
also non-dirty pages
Note that without the patch at [1] and the small fix in this series, the
selftests will fail.
[1] https://lore.kernel.org/all/[email protected]/
Signed-off-by: Nico Boehr <[email protected]>
Reviewed-by: Claudio Imbrenda <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Claudio Imbrenda <[email protected]>
[[email protected]: squashed
[email protected] / "KVM: s390: selftests:
CMMA: don't run if CMMA not supported"]
Signed-off-by: Janosch Frank <[email protected]>
|
|
There are some MD5 tests which fail when the kernel is in FIPS mode,
since MD5 is not FIPS compliant. Add a check and only run those tests
if FIPS mode is not enabled.
Fixes: f0bee1ebb5594 ("fcnal-test: Add TCP MD5 tests")
Fixes: 5cad8bce26e01 ("fcnal-test: Add TCP MD5 tests for VRF")
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Magali Lemes <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede)
algorithms for performing authentication and encryption, respectively.
This causes the tests to fail when fips=1 is set, since these algorithms
are not allowed in FIPS mode. Therefore, switch from hmac(md5) and
cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant.
Fixes: 3f251d741150 ("selftests: Add tests for vrf and xfrms")
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Magali Lemes <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
TLS selftests use the ChaCha20-Poly1305 and SM4 algorithms, which are not
FIPS compliant. When fips=1, this set of tests fails. Add a check and only
run these tests if not in FIPS mode.
Fixes: 4f336e88a870 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests")
Fixes: e506342a03c7 ("selftests/tls: add SM4 GCM/CCM to tls selftests")
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Magali Lemes <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Before executing each test from a fixture, FIXTURE_SETUP is run once.
When SKIP is used in FIXTURE_SETUP, the setup function returns early
but the test still proceeds to run, unless another SKIP macro is used
within the test definition, leading to some code repetition. Therefore,
allow tests to be skipped directly from the setup function.
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Magali Lemes <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/mlx5/driver.h
617f5db1a626 ("RDMA/mlx5: Fix affinity assignment")
dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
https://lore.kernel.org/all/[email protected]/
tools/testing/selftests/net/mptcp/mptcp_join.sh
47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not")
45b1a1227a7a ("mptcp: introduces more address related mibs")
0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/
No adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, and netfilter.
Selftests excluded - we have 58 patches and diff of +442/-199, which
isn't really small but perhaps with the exception of the WiFi locking
change it's old(ish) bugs.
We have no known problems with v6.4.
The selftest changes are rather large as MPTCP folks try to apply
Greg's guidance that selftest from torvalds/linux should be able to
run against stable kernels.
Last thing I should call out is the DCCP/UDP-lite deprecation notices.
We are fairly sure those are dead, but if we're wrong reverting them
back in won't be fun.
Current release - regressions:
- wifi:
- cfg80211: fix double lock bug in reg_wdev_chan_valid()
- iwlwifi: mvm: spin_lock_bh() to fix lockdep regression
Current release - new code bugs:
- handshake: remove fput() that causes use-after-free
Previous releases - regressions:
- sched: cls_u32: fix reference counter leak leading to overflow
- sched: cls_api: fix lockup on flushing explicitly created chain
Previous releases - always broken:
- nf_tables: integrate pipapo into commit protocol
- nf_tables: incorrect error path handling with NFT_MSG_NEWRULE, fix
dangling pointer on failure
- ping6: fix send to link-local addresses with VRF
- sched: act_pedit: parse L3 header for L4 offset, the skb may not
have the offset saved
- sched: act_ct: fix promotion of offloaded unreplied tuple
- sched: refuse to destroy an ingress and clsact Qdiscs if there are
lockless change operations in flight
- wifi: mac80211: fix handful of bugs in multi-link operation
- ipvlan: fix bound dev checking for IPv6 l3s mode
- eth: enetc: correct the indexes of highest and 2nd highest TCs
- eth: ice: fix XDP memory leak when NIC is brought up and down
Misc:
- add deprecation notices for UDP-lite and DCCP
- selftests: mptcp: skip tests not supported by old kernels
- sctp: handle invalid error codes without calling BUG()"
* tag 'net-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
dccp: Print deprecation notice.
udplite: Print deprecation notice.
octeon_ep: Add missing check for ioremap
selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET
net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_open
net: tipc: resize nlattr array to correct size
sfc: fix XDP queues mode with legacy IRQ
net: macsec: fix double free of percpu stats
net: lapbether: only support ethernet devices
MAINTAINERS: add reviewers for SMC Sockets
s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit()
net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo frames
net/sched: cls_api: Fix lockup on flushing explicitly created chain
ice: Fix ice module unload
net/handshake: remove fput() that causes use-after-free
selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate step
net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting
net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs
net/sched: act_ct: Fix promotion of offloaded unreplied tuple
wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression
...
|
|
There may be multiplexing triggered, e.g., e-core of ADL.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Introduce a new metricgroup, Default, to tag all the metric groups which
will be collected in the default mode.
Add a new field, DefaultMetricgroupName, in the JSON file to indicate
the real metric group name. It will be printed in the default output
to replace the event names.
There is nothing changed for the output format.
On SPR, both TopdownL1 and TopdownL2 are displayed in the default
output.
On ARM, Intel ICL and later platforms (before SPR), only TopdownL1 is
displayed in the default output.
Suggested-by: Stephane Eranian <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For the default output, the default metric group could vary on different
platforms. For example, on SPR, the TopdownL1 and TopdownL2 metrics
should be displayed in the default mode. On ICL, only the TopdownL1
should be displayed.
Add a flag so we can tag the default metric group for different
platforms rather than hack the perf code.
The flag is added to Intel TopdownL1 since ICL and ADL, TopdownL2
metrics since SPR.
Add a new field, DefaultMetricgroupName, in the JSON file to indicate
the real metric group name.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The annotation for hardware events is wrong on hybrid. For example,
# ./perf stat -a sleep 1
Performance counter stats for 'system wide':
32,148.85 msec cpu-clock # 32.000 CPUs utilized
374 context-switches # 11.633 /sec
33 cpu-migrations # 1.026 /sec
295 page-faults # 9.176 /sec
18,979,960 cpu_core/cycles/ # 590.378 K/sec
261,230,783 cpu_atom/cycles/ # 8.126 M/sec (54.21%)
17,019,732 cpu_core/instructions/ # 529.404 K/sec
38,020,470 cpu_atom/instructions/ # 1.183 M/sec (63.36%)
3,296,743 cpu_core/branches/ # 102.546 K/sec
6,692,338 cpu_atom/branches/ # 208.167 K/sec (63.40%)
96,421 cpu_core/branch-misses/ # 2.999 K/sec
1,016,336 cpu_atom/branch-misses/ # 31.613 K/sec (63.38%)
The hardware events have extended type on hybrid, but the evsel__match()
doesn't take it into account.
Filter the config on hybrid before checking.
With the patch,
# ./perf stat -a sleep 1
Performance counter stats for 'system wide':
32,139.90 msec cpu-clock # 32.003 CPUs utilized
343 context-switches # 10.672 /sec
32 cpu-migrations # 0.996 /sec
73 page-faults # 2.271 /sec
13,712,841 cpu_core/cycles/ # 0.000 GHz
258,301,691 cpu_atom/cycles/ # 0.008 GHz (54.20%)
12,428,163 cpu_core/instructions/ # 0.91 insn per cycle
37,786,557 cpu_atom/instructions/ # 2.76 insn per cycle (63.35%)
2,418,826 cpu_core/branches/ # 75.259 K/sec
6,965,962 cpu_atom/branches/ # 216.739 K/sec (63.38%)
72,150 cpu_core/branch-misses/ # 2.98% of all branches
1,032,746 cpu_atom/branch-misses/ # 42.70% of all branches (63.35%)
Suggested-by: Ian Rogers <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We write an address then a ',' to addr2line. With inline data we
generally get back (// are my comments):
0x1234 // address
foo // function name
foo.c:123 // filename:line
bar // function name
bar.c:123 // filename:line
0x000000000000000 // sentinel address created by ','
?? // unknown function name
??:0 // unknown filename:line
The code was assuming the inline data also had the address, which is
incorrect. This means the first inline function name (bar above) needs
to be checked to see if it is the sentinel, otherwise to be treated as
a function name. The regression was caused by the addition of
addresses as the kernel is reporting a symbol at address 0 (used by
GNU binutils when it interprets ',').
Committer testing:
Using:
# perf trace --call-graph=dwarf -e lock:contention_*
<SNIP>
1244.615 TaskCon~ller #/2645281 lock:contention_begin(lock_addr: 0xffff8e6748da5ab0, flags: 2)
__preempt_count_dec_and_test (inlined)
trace_contention_begin (inlined)
trace_contention_begin (inlined)
rwsem_down_read_slowpath ([kernel.kallsyms])
__preempt_count_dec_and_test (inlined)
trace_contention_begin (inlined)
trace_contention_begin (inlined)
rwsem_down_read_slowpath ([kernel.kallsyms])
__down_read_common (inlined)
__down_read (inlined)
down_read ([kernel.kallsyms])
arch_static_branch (inlined)
static_key_false (inlined)
__mmap_lock_trace_acquire_returned (inlined)
mmap_read_lock (inlined)
do_user_addr_fault ([kernel.kallsyms])
arch_local_irq_disable (inlined)
handle_page_fault (inlined)
exc_page_fault ([kernel.kallsyms])
asm_exc_page_fault ([kernel.kallsyms])
[0x4def008] (/usr/lib64/firefox/libxul.so)
1244.619 TaskCon~ller #/2645281 lock:contention_end(lock_addr: 0xffff8e6748da5ab0)
__preempt_count_dec_and_test (inlined)
trace_contention_end (inlined)
trace_contention_end (inlined)
rwsem_down_read_slowpath ([kernel.kallsyms])
__preempt_count_dec_and_test (inlined)
trace_contention_end (inlined)
trace_contention_end (inlined)
rwsem_down_read_slowpath ([kernel.kallsyms])
__down_read_common (inlined)
__down_read (inlined)
down_read ([kernel.kallsyms])
arch_static_branch (inlined)
static_key_false (inlined)
__mmap_lock_trace_acquire_returned (inlined)
mmap_read_lock (inlined)
do_user_addr_fault ([kernel.kallsyms])
arch_local_irq_disable (inlined)
handle_page_fault (inlined)
exc_page_fault ([kernel.kallsyms])
asm_exc_page_fault ([kernel.kallsyms])
<SNIP>
Fixes: 8dc26b6f718a8118 ("perf srcline: Make sentinel reading for binutils addr2line more robust")
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tom Rix <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Previously, timestamps were printed using "%lld.%u" which is incorrect
for nanosecond values lower than 100,000,000 as they're fractional
digits, therefore leading zeros are meaningful.
This patch changes the format strings to "%lld.%09u" in order to add
leading zeros to the nanosecond value.
Fixes: 568ebc5985f5 ("ptp: add the PTP_SYS_OFFSET ioctl to the testptp program")
Fixes: 4ec54f95736f ("ptp: Fix compiler warnings in the testptp utility")
Fixes: 6ab0e475f1f3 ("Documentation: fix misc. warnings")
Signed-off-by: Alex Maftei <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add new test case which checks that timestamp updates on actual terminal
character device (e.g. /dev/pts/0) happen even if the terminal is
accessed via magic /dev/tty file.
Signed-off-by: Michal Sekletar <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
First set of Counter updates for the 6.5 cycle
Biggest changes in this set include the introduction of a new Intel 8254
interface library module and the refactoring of the existing 104-quad-8
modules to migrate it to the regmap API. Some other minor cleanups
touching tools/counter and stm32-timer-cnt are also present.
Changes
* 104-quad-8
- Remove reference in Kconfig to 25-bit counter value
- Utilize bitfield access macros
- Refactor to buffer states for CMR, IOR, and IDR
- Utilize helper functions to handle PR, FLAG and PSC
- Migrate to the regmap API
* i8254
- Introduce the Intel 8254 interface library module
* stm32-timer-cnt
- Reset TIM_TISEL to its default value in probe
* tools/counter
- Add .gitignore
- Remove lingering 'include' directories on make clean
* tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: i8254: Introduce the Intel 8254 interface library module
counter: 104-quad-8: Migrate to the regmap API
counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
counter: 104-quad-8: Utilize bitfield access macros
tools/counter: Makefile: Remove lingering 'include' directories on make clean
tools/counter: Add .gitignore
counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe
counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
|
|
The inability to include the uAPI headers directly in tools/
is one of the bigger annoyances of compiling user space code.
Most projects trade the pain for smaller inconvenience of having
to copy the headers under tools/include.
In case of netlink headers I think that we can avoid both.
Netlink family headers are simple and should be self-contained.
We can try to twiddle the Makefile a little to force-include
just the family header, and use system headers for the rest.
This works fairly well. There are two warts - for some reason
if we specify -include $path/family.h as a compilation flag,
the #ifdef header guard does not seem to work. So we need
to throw the guard in on the command line as well. Seems like
GCC detects that the header is different and tries to include
both. Second problem is that make wants hash sign to be escaped
or not depending on the version. Sigh.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
addr2line may fail to send expected values causing perf to wait
indefinitely. Add a 1 second timeout (twice the timeout for reading from
/proc/pid/maps) so that such reads don't cause perf to appear to lock
up.
There are already checks that the file for addr2line contains a debug
section but this isn't always sufficient. The problem was observed when
a valid elf file would set the configuration for binutils addr2line,
then a later read of vmlinux with ELF debug sections would cause a
failing write/read which would block indefinitely.
As a service to future readers, if the io hits eof or an error, cleanup
the addr2line process.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Yang Jihong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In situations like reading from a pipe it can be useful to have a
timeout so that the caller doesn't block indefinitely. Implement a
simple one based on poll.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Yang Jihong <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Found by leak sanitizer:
```
==1632594==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 21 byte(s) in 1 object(s) allocated from:
#0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439
#1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369
#2 0x556701d70589 in perf_env__cpuid util/env.c:465
#3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14
#4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83
#5 0x556701d8f78b in evsel__config util/evsel.c:1366
#6 0x556701ef5872 in evlist__config util/record.c:108
#7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112
#8 0x556701cacd07 in run_test tests/builtin-test.c:236
#9 0x556701cacfac in test_and_print tests/builtin-test.c:265
#10 0x556701cadddb in __cmd_test tests/builtin-test.c:402
#11 0x556701caf2aa in cmd_test tests/builtin-test.c:559
#12 0x556701d3b557 in run_builtin tools/perf/perf.c:323
#13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377
#14 0x556701d3be90 in run_argv tools/perf/perf.c:421
#15 0x556701d3c3f8 in main tools/perf/perf.c:537
#16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s).
```
Fixes: f7b58cbdb3ff36eb ("perf mem/c2c: Add load store event mappings for AMD")
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Ravi Bangoria <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now that user_events does not honor persist events the dynamic_events
file cannot be easily used to test parsing and matching cases.
Update dyn_test to use the direct ABI file instead of dynamic_events so
that we still have testing coverage until persist events and
dynamic_events file integration has been decided.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Beau Belgrave <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
User events now auto cleanup upon the last reference put. Update
ftrace_test to ensure this works as expected. Ensure EBUSY delays
while event is being deleted do not cause transient failures by
waiting and re-attempting.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Beau Belgrave <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Tests to ensure events that has empty arguments can input trace record
correctly when using perf.
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Beau Belgrave <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: sunliming <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
When the self test is completed, perf self-test left the user events not to
be cleared. Clear the events by unregister and delete the event.
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Beau Belgrave <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: sunliming <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|